TNMG 110402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and secure clamping for consistently high surface quality. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 110402 NS9530 Tungaloy turning insert – triangular ISO finishing insert for steel TNMG110402 NS9530 is a triangular, ISO‑standard indexable insert designed for finishing turns in steel, optimised for continuous cuts and small depths of cut Finishing grade NS9530 for steel Uncoated cermet substrate for sharp edge Triangular ISO form with 0° clearance Cylindrical centre hole for secure clamping Achieve superior finishing and repeatable surface quality The NS9530 grade is an uncoated cermet designed specifically as a finishing sort for steel. Its combination of a sharp cutting edge and low cutting forces results in high surface finish with minimal burr formation. For shops focused on consistent part quality, this insert reduces rework and inspection time by enabling a stable, continuous cut in typical finishing settings. The substrate material is a cemented carbide base optimised to support the fine cutting geometry of the cermet layer, balancing tool life with surface performance. Maintain productivity with efficient chip control and stable clamping A double-sided chipbreaker and a cylindrical centre hole provide secure clamping and reliable chip formation during turning. The insert’s 0° clearance geometry supports low radial engagement, which lowers cutting forces and decreases vibration in less rigid set-ups. This translates to faster cycle consistency and less spindle load in repetitive finishing operations. Where dimensional repeatability and surface integrity matter, the engineered geometry of this plate helps maintain productivity without sacrificing finish. Easy integration into ISO tooling systems and predictable results As an ISO‑normed triangular insert, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The TNMG110402 format (11 mm inscribed circle, 4.76 mm thickness, 60° included angle, corner radius 0.2 mm) fits standard TNMG holders and requires no special adapters. For users new to cermet finishing grades: cermet combines ceramic and metallic properties to offer excellent wear resistance and a sharp edge, particularly suitable for continuous finishing of steels with small depths of cut. This predictability reduces trial-and-error setup and shortens process development time. For precise finishing in steel with the Tungaloy NS9530 cermet insert, contact Metav Werkzeuge for tailored application support via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and supply Technical data Article number: 6966208 SKU: 6966208-Tungaloy Manufacturer SKU: TUN6966208 Designation: TNMG110402 NS9530 Core dimensions Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief/clearance angle: 0° With centre hole: cylindrical Special features Uncoated cermet grade NS9530 Substrate: cemented carbide Triangular insert (TNMG) Double-sided chipbreaker ISO standard turning insert Intended application: external and internal turning, finishing steel Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The TNMG110402 NS9530 is formulated as a finishing sort for steel, offering low cutting forces and excellent surface quality in continuous cuts. Can the insert be clamped in standard TNMG holders? Yes, the insert conforms to ISO TNMG dimensions (11 mm inscribed circle, 4.76 mm thickness) and fits compatible TNMG holders that accept a cylindrical centre hole. How does the uncoated cermet grade affect performance? Uncoated cermet gives a very sharp cutting edge and good wear resistance in finishing; it performs best with small depths of cut and continuous cutting conditions to achieve optimum surface finish. Is the insert reversible or single‑use per edge? This insert is double‑sided, providing multiple usable cutting edges before rotation or replacement is required, improving economy per insert. Which cutting conditions suit this grade best? The NS9530 grade is optimised for finishing operations with lower feeds and light depths of cut, where surface integrity and low cutting forces are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 NS9530 Wendeplatten - Tungaloy
Combine the NS9530 uncoated cermet finishing grade with the proven TNMG 110402 geometry to achieve precise, low-force turning and superior surface finish; order the insert directly via Metav Werkzeuge or consult the team for application support. TNMG 110402 NS9530 — Tungaloy turning insert, 60° triangle, 0.2 mm nose A TNMG 110402 NS9530 ISO turning insert designed for precision external and internal turning, optimised for finishing cuts in steel. TNMG geometry for versatile turning NS9530 uncoated cermet finishing grade Sharp cutting edge for low cutting forces Double-sided insert with cylindrical hole Precision finishing with low cutting forces The TNMG110402 insert combines an uncoated cermet cutting material with a finely honed edge geometry to deliver consistently low cutting forces and an excellent surface finish in finishing operations. The NS9530 grade is formulated for continuous cuts and small depths of cut, which reduces vibration and enables more predictable results on steel components. This leads to fewer rework cycles, longer tool life in finishing stages and a measurable improvement in part quality when compared with generic inserts. Stable clamping and ISO compatibility for reliable production The insert is manufactured to ISO dimensions and its compatibility with a holder is determined by form, clearance angle, tolerance class, attachment method, size and thickness. Key dimensions — 60° triangle, nose radius 0.2 mm, thickness 4.76 mm and inscribed circle 11 mm — support repeatable seating and clamping on standard external holders or boring bars. The 0° relief angle and the cylindrical locating hole ensure secure fixation and repeatable positioning, which reduces setup time and improves process stability on serial production. Practical operation and selection guidance Being double-sided with a functional chipbreaker on both faces, the insert offers economical use of both edges and straightforward indexability. The combination of a carbide substrate with an uncoated cermet top provides the crisp cutting edge required for finishing steel; select the chipbreaker and grade to match part stability and the chosen cutting parameters. For best results in fine turning choose shallow depths and steady feeds to exploit the grade's low cutting forces and achieve the targeted surface roughness. Note that holder rigidity and correct clamping torque are decisive for repeatable performance. Contact Metav Werkzeuge for tailored advice on Tungaloy TNMG 110402 NS9530, availability and application-specific recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797231 SKU: 6797231-Tungaloy Manufacturer SKU: TUN6797231 Model series: ISO turning indexable inserts Designation: TNMG110402 NS9530 Facts Geometry angle: 60° Nose radius: 0.2 mm Relief/clearance angle: 0° Thickness: 4.76 mm Inscribed circle (size): 11 mm Special features Uncoated cermet grade NS9530 Carbide substrate Double-sided chipbreaker Cylindrical locating hole Triangular insert form ISO turning insert for finishing in steel FAQ What materials is this insert suited for? The TNMG110402 NS9530 insert is a finishing grade optimised for steel; the NS9530 uncoated cermet provides a sharp cutting edge and low cutting forces for continuous and small-depth operations. How is the insert secured to the holder? The insert uses a cylindrical locating hole and standard ISO seating; secure clamping is achieved through the matching external holder or boring bar designed for TNMG form. Can both sides of the insert be used? Yes — the insert is double-sided with a chipbreaker on each face to permit economical indexing and extended use of the available cutting edges. Which dimensions determine compatibility with existing toolholders? Compatibility depends on the ISO geometry, clearance angle, tolerance class, attachment style, size (11 mm inscribed circle) and thickness (4.76 mm); these ensure correct seating on ISO holders. Is the NS9530 grade coated? No — NS9530 is specified as an uncoated cermet finishing grade to provide a very sharp edge for high-quality surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide T6215 and a 0.2 mm corner radius for consistent edge life and reliable finishing in turning operations; order directly via Metav Werkzeuge or consult our experts for application support. TNMG110402 T6215 turning indexable insert — 60° triangular, CVD-coated by Tungaloy The TNMG110402 T6215 is an ISO-standard turning indexable insert designed for external and internal turning of stainless steels under stable to lightly interrupted conditions. CVD-coated carbide T6215 60° triangular insert geometry 0.2 mm corner radius for fine finishing Double-sided insert with cylindrical hole High wear resistance for stainless steel turning The insert combines a CVD coating with a robust carbide substrate to deliver extended tool life when machining stainless steel. The coating resists abrasive wear and reduces adhesion at the cutting edge, which helps maintain dimensional accuracy over longer production runs. The 0.2 mm corner radius supports a fine surface finish while allowing controlled cutting forces; this balance reduces rework and contributes to consistent part quality in serial machining. ISO conformity and straightforward clamping for secure operation Built to the ISO designation, the indexable insert ensures predictable fitment with compatible holders: geometry, clearance, tolerance class, fastening style, size and thickness determine compatibility. The triangular shape with a cylindrical hole and 60° included angle provides repeatable seating and stable clamping, while the specified 0° clearance maintains the required cutting geometry for many turning setups. This standardisation simplifies inventory management and helps reduce set-up time across different machines. Stable machining and measurable productivity gains A double-sided chipbreaker and the CVD-coated grade are optimised for productive turning under steady or lightly interrupted conditions, offering stable cutting behaviour and reliable chip control. For external and internal turning tasks the insert supports efficient material removal rates while protecting the cutting edge from premature wear. The result is improved process reliability, lower tool-change frequency and a measurable contribution to throughput in mixed-production environments. For tailored recommendations on applying this Tungaloy TNMG insert in specific turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and availability. Technical data Article number: 6944835-Tungaloy Manufacturer SKU: TUN6944835 Manufacturer article number: 6944835 Model series: ISO turning indexable inserts Facts Insert designation: TNMG110402 Grade / coating: T6215 (CVD-coated) Substrate material: carbide Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Triangular insert shape Double-sided chipbreaker Designed for external and internal turning Suited to stainless steel machining under stable to slightly interrupted conditions FAQ What materials is this insert best suited for? The TNMG110402 T6215 insert is formulated for machining stainless steel, offering wear resistance and chip control suitable for stable to lightly interrupted turning operations. Is the insert compatible with standard ISO holders? Yes, the ISO designation of the TNMG110402 ensures compatibility where holder geometry, tolerance class, fastening and thickness match the insert specifications. How does the T6215 coating affect tool life? The CVD-based T6215 coating improves abrasion resistance and reduces edge adhesion, which typically prolongs cutting performance and reduces frequency of tool changes for stainless steel turning. Can this insert be used for both external and internal turning? The geometry and chipbreaker design make the insert suitable for both external and internal turning tasks when the holder provides correct support and clearance. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius offers a compromise between strength and finish, supporting a finer surface texture while still maintaining edge robustness during production machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T6215 Wendeplatten - Tungaloy
Combining durable CVD-coated carbide and the ISO TNMG geometry delivers stable, long-running performance for stainless-steel turning operations; excellent chip control and a precise 60° angle support consistent component quality. Order the TNMG110402 T6215 insert directly via Metav Werkzeuge or request compatibility advice from our consultants. TNMG 110402 T6215 — TNMG turning insert for turning by Tungaloy, CVD-coated carbide, 60° The TNMG110402 T6215 is a triangular, double-sided indexable insert designed for external and internal turning, optimised for stable to slightly interrupted cuts in stainless steels. CVD-coated carbide for stainless steel ISO TNMG 110402 geometry, 60° angle Double-sided chipbreaker, triangular form Cylindrical-hole design for secure clamping Reliable performance for stainless-steel turning The combination of a CVD-coated carbide substrate and a wear-resistant grade provides consistent performance when machining stainless steel. The coating reduces abrasive wear and oxidation at elevated cutting temperatures, which is especially important for corrosion-resistant alloys that tend to work-harden. As an indexable insert, the part offers quick indexing and reduced changeover time, supporting continuous production and predictable tool-life cycles. Precision geometry that supports stable cuts and tolerance control The insert’s ISO TNMG 110402 geometry and 60° wedge angle deliver predictable chip formation and cutting forces. A corner radius of 0.2 mm and a 0° clearance angle help maintain dimensional accuracy and surface finish in both external and internal turning. The triangular plate form, combined with a cylindrical hole, ensures secure clamping in compatible holders and facilitates correct seat positioning, which reduces vibration and improves repeatability across batches. Longer tool life through coating and controlled chip evacuation A focused chip management strategy—here realised by a double-sided chipbreaker—improves process reliability and reduces rework. The CVD coating increases resistance to abrasive wear and thermal degradation, extending the number of usable edges per insert and lowering overall tooling costs. Fewer indexing cycles and stable cutting conditions also reduce machine downtime, contributing to higher productivity and predictable maintenance intervals. Practical selection and system considerations for efficient machining Select the chipbreaker version and grade that match the workpiece material, cutting conditions and machine stability: the double-sided breaker suits a range of feed rates and depths of cut in stable setups. The insert forms part of a system—insert, appropriate holder, clamp and screw—so verify compatibility by matching form, clearance, tolerance class, fixing and thickness. For flexible process integration, the ISO-standard geometry simplifies replacement and spares management across multiple machines. Contact Metav Werkzeuge for availability and compatibility checks on the Tungaloy TNMG110402 T6215 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6966205 Manufacturer SKU: TUN6966205 Model series: ISO turning indexable inserts Designation: TNMG110402 Grade/coating: T6215 Material: carbide Facts Corner radius: 0.2 mm Included hole: with hole (cylindrical) Clearance angle: 0° Plate thickness: 4.76 mm Insert size: 11 mm Insert angle: 60° Special features Triangular plate, double-sided chipbreaker Cylindrical-hole fastening CVD-coated carbide grade for stainless steel Suitable for external and internal turning ISO-compatible geometry and tolerances FAQ Is this insert suitable for machining stainless steels? The TNMG110402 T6215 insert is specifically graded and coated for stainless steel turning under stable to slightly interrupted cutting conditions. Which holders are compatible with the TNMG110402 geometry? Compatibility is determined by holder form, free angle, tolerance class, fastening, size and thickness; the insert fits standard ISO TNMG holders with a cylindrical-hole clamping system. What advantage does the T6215 grade provide? The T6215 CVD-coated grade offers improved wear resistance and thermal stability for extended edge life when turning stainless-steel alloys. Can the insert be indexed to use multiple edges? Yes; the triangular, double-sided design allows multiple indexing positions, increasing usable life per insert and reducing tooling costs. Is this insert intended for interrupted cuts? The insert is optimised for stable to slightly interrupted cuts; heavily interrupted or highly unstable conditions may require an alternative geometry or stronger support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide wear resistance and the 0.2 mm corner radius for reliable turning of rostfreier Stahl; the ISO geometry ensures straightforward holder compatibility and stable process results. Order the original Tungaloy insert via Metav Werkzeuge or consult our application specialists for tailored recommendations. TNMG 110402 T6215 — TNMG110402 T6215 Tungaloy insert for Turning, CVD-coated carbide The TNMG110402 T6215 is an ISO-format triangular turning insert designed for stable to lightly interrupted turning of rostfreier Stahl and similar alloys. CVD-coated carbide for wear resistance ISO compatibility simplifies holder selection Double-sided chipbreaker for extended edge life Better surface quality and longer edge life through CVD coating The CVD-coated carbide grade T6215 combines abrasion resistance with a consistent microstructure, which translates into longer tool life when machining rostfreier Stahl. A chemically vapour-deposited layer improves wear behaviour at the cutting edge, reducing flank wear in continuous operations. This results in fewer tool changes and a steadier surface finish, so production runs remain predictable and efficient. Predictable fit and mechanical stability with ISO geometry The insert follows the ISO profile for triangular turning plates, so compatibility with external holders and boring bars is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Where holder choice is constrained, the standardised geometry reduces setup variability. The 0° clearance angle and the 60° included angle provide a familiar kinematic for conventional turning, helping to maintain reproducible cutting conditions across batches. Practical productivity gains from design and chip control A double-sided chipbreaker extends usable edges and aids chip formation when turning ductile or work-hardened materials. The chipbreaker supports controlled chip evacuation and reduces the risk of built-up edge, which in turn helps to keep feeds and speeds nearer to optimum values for increased productivity. The triangular shape offers multiple indexed edges, further lowering per-edge cost and downtime for edge changes. Clear selection parameters for reliable application Key dimensions such as the 0.2 mm corner radius, 4.76 mm thickness and 11 mm inscribed circle determine the part profile and strength of the cutting edge; the insert’s cylindrical hole facilitates secure clamping in many ISO-compatible seats. For mildly interrupted cuts, the combination of carbide substrate and T6215 coating is suitable under stable machining conditions. When in doubt about stability or grade selection, choose the geometry and chipbreaker that match the holder and the workpiece rigidity to maintain process security. For tailored process advice or to source original Tungaloy TNMG110402 T6215 inserts with CVD-coated carbide, contact Metav Werkzeuge for application support and delivery options. Technical data Article number: 6944820 Manufacturer SKU: TUN6944820 Label: TNMG110402 T6215 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Numbers Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle (size): 11 mm Included angle: 60° Clearance angle: 0° Special features Material: carbide Coating: CVD Chipbreaker: double-sided Shape: triangular Hole style: cylindrical hole Application: turning Compatibility: ISO-format insert, fits holders by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The TNMG110402 T6215 insert is specified for machining rostfreier Stahl and similar alloys, where a wear-resistant CVD-coated carbide grade is advantageous. Can both sides of the insert be used? Yes, the double-sided chipbreaker indicates reversible use of the cutting edges to extend edge life and reduce tooling costs for the TNMG110402. Which holder characteristics determine compatibility with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-format TNMG110402 follows standard dimensions to simplify matching. What does the T6215 designation signify? T6215 denotes a CVD-coated carbide grade tuned for wear resistance in turning applications, offering stable performance under continuous to lightly interrupted conditions. Is this insert suitable for interrupted cuts? The grade is optimised for stable to slightly interrupted turning; for heavy interruptions, assessment of workpiece rigidity and cutting parameters is recommended before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance and predictable edge life, combined with ISO-compliant geometry for straightforward holder compatibility; order via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 110402 T9215 triangular indexable turning insert — turning, Tungaloy The TNMG110402 T9215 is a triangular ISO turning insert designed for medium-steel applications, offering a balance of wear resistance and breakage reliability for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 ISO-compliant triangular geometry Double-sided chipbreaker for productivity Compatible with standard ISO holders Increased productivity through a wear-resistant grade The CVD-coated T9215 grade combines a hard surface layer with a tough substrate to deliver extended tool life under typical turning conditions. As a result, the insert supports stable machining in medium-steel applications and helps to maintain consistent cycle times. The CVD-coated finish improves resistance to abrasive wear, while the carbide body sustains mechanical loads, offering a reliable option where surface quality and longevity matter. Predictable cutting performance and edge security With a double-sided chipbreaker and a corner radius of 0.2 mm, the insert provides repeatable chip control and controlled cutting forces. The chipbreaker design is optimised for finishing to medium roughing passes, keeping forces within machine and holder limits and reducing the risk of unexpected insert fracture. The triangular form means three indexed cutting edges per side, supporting economical edge usage and predictable reconditioning intervals. Straightforward integration and handling for efficient setups The insert's ISO-compliant dimensions — 11 mm size and 4.76 mm thickness — together with the cylindrical central hole, ensure compatibility with common ISO turning holders and clamping systems. The geometry and tolerance class facilitate quick changeovers and reduce setup variability, which is particularly beneficial in serial production and mixed-batch turning. Clear, standardised specifications simplify tool management and inventory planning. For application-specific recommendations on using the Tungaloy T9215 inserts in medium-steel turning, contact Metav Werkzeuge for tailored guidance and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6966203 SKU: 6966203-Tungaloy Manufacturer SKU: TUN6966203 Material: carbide Model series: ISO turning inserts Data Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Insert angle: 60° Clearance angle: 0° Special features Triangular shape, three cutting edges Double-sided chipbreaker Cylindrical central hole Grade: T9215 (CVD-coated carbide) Application: turning; medium steel ISO-compliant geometry and tolerances FAQ What steels is this insert best suited for? The TNMG 110402 T9215 insert is optimised for medium-steel machining, where the T9215 grade balances wear resistance and fracture toughness for productive turning. How many cutting edges are available per insert? The triangular form provides three indexed cutting edges per side, and with the double-sided construction each insert yields multiple usable edges before disposal. Which holders are compatible with this insert? The insert follows ISO dimensions and tolerance classes, making it compatible with standard ISO turning holders that accept TNMG 110402 geometry and a central cylindrical hole. What does the chipbreaker support in terms of cutting strategy? The double-sided chipbreaker is designed for controlled chip formation in finishing and light to medium roughing, promoting stable cutting forces and consistent surface finish. Is this a good choice for interrupted cuts? The T9215 grade offers good fracture resistance for continuous to lightly interrupted cuts; for heavily interrupted conditions, a more fracture-resistant grade should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a precise 0.2 mm corner radius to increase process stability and tool life; order genuine inserts through Metav Werkzeuge or ask the consultants for tailored support. TNMG 110402 T9215 indexable insert for turning — Tungaloy TNMG 110402 T9215 from Tungaloy is a triangular, ISO‑standard indexable insert designed for productive external and internal turning in medium steel applications. CVD-coated carbide grade T9215 for medium steel Double-sided chipbreaker for consistent chip control Triangular TNMG form with 0.2 mm corner radius ISO compatibility with cylindrical-hole clamping systems Increased throughput thanks to optimised wear resistance The CVD-coated cutting grade T9215 combines high wear resistance with controlled toughness, enabling sustained cutting performance in continuous and light interrupted cuts. This combination reduces the frequency of tool changes and contributes directly to higher productivity on batch and series production. The result is a reliable machining cycle with fewer process interruptions and a predictable tool-life window. Consistent component quality through precise geometry A stable cutting edge geometry is essential for repeatable surface finish and dimensional accuracy. The triangular TNMG geometry, with its 0.2 mm corner radius and 0° relief, gives a defined cutting line and predictable chip formation. The insert’s double-sided chipbreaker supports reliable chip evacuation, which in turn helps maintain surface integrity and reduces the risk of built-up edge. Together these features support tighter tolerances and fewer rework operations. Easy integration and secure clamping for manufacturing efficiency Designed to the ISO indexable insert standards, the plate features a cylindrical hole and standard dimensions to fit common ISO holders and boring bars, simplifying tool inventory and changeover. The 4.76 mm thickness and triangular form provide mechanical stability under load, while the ISO designation ensures straightforward selection for existing toolholders. This compatibility reduces setup time and supports leaner tooling logistics in the production environment. For expert advice on selecting the right Tungaloy indexable insert for specific machining tasks or to order genuine TNMG 110402 T9215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application‑matched recommendations. Technical Data Article number: 6782314 Manufacturer SKU: TUN6782314 SKU: 6782314-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Included angle: 60° Corner radius: 0.2 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 Special features CVD-coated carbide grade T9215 Double-sided chipbreaker Triangular plate form (TNMG) Cylindrical hole clamping ISO designation TNMG110402 Application: turning FAQ Is this insert suitable for medium steel machining? The TNMG 110402 T9215 indexable insert is optimised for medium steel, where the T9215 grade provides a balance of wear resistance and toughness suitable for productive turning operations. Can the insert handle interrupted cutting conditions? Yes. The cutting grade is designed for continuous to light interrupted cuts; moderate interruptions are manageable due to the grade’s toughness and stable chip control. What holder characteristics ensure compatibility? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the ISO TNMG form with a cylindrical hole fits standard ISO holders when these parameters match. How does the double-sided chipbreaker benefit machining? A double-sided chipbreaker offers consistent chip formation on both indexed edges, improving chip evacuation and contributing to consistent surface finish and tool life. Does the insert come with a standard ISO designation for easy procurement? Yes, the plate conforms to ISO indexable insert dimensions and is specified as TNMG110402 with grade T9215 for straightforward selection and stock management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide in grade T9215 with the ISO TNMG form delivers a reliable balance of wear resistance and fracture toughness for productive medium steel turning. The triangular, double-sided insert with a 0.2 mm nose radius and secure cylindrical hole ensures consistent indexation and reduced downtime. Order the TNMG110402 directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG110402 T9215 ISO triangular indexable insert — CVD-coated carbide for turning (Tungaloy) The TNMG110402 T9215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for medium steel machining and continuous to lightly interrupted cuts. ISO triangular insert TNMG form CVD-coated carbide grade T9215 Double-sided chipbreaker for stability 0.2 mm nose radius for fine finishing Boosted productivity through optimised wear resistance The CVD-coated carbide grade T9215 combines high wear resistance with enhanced fracture safety, enabling higher metal removal rates in medium steel. The coating supports longer tool life under continuous and slightly interrupted cuts, which translates into fewer tool changes and improved machine uptime. This results in measurable cycle-time savings and a steadier production flow when compared with uncoated or lower-grade alternatives. Predictable tool life and secure clamping for uninterrupted runs Adherence to ISO dimensions and the TNMG form simplifies tool selection and replacement across toolholders. The insert’s cylindrical hole provides firm fixation and repeatable seating, reducing micro-movement during heavy or interrupted cuts. With defined form, clearance and tolerance, the insert delivers dependable repeatability across batches, making process planning and inventory management more straightforward for production environments. Improved surface quality with controlled chip formation The double-sided chipbreaker geometry moderates chip flow and reduces cutting forces in typical turning operations, contributing to a consistent surface finish and lower risk of built-up edge. The 0.2 mm nose radius is designed to balance finishing capability and robustness; it supports better dimensional control on profiles and reduced secondary operations, lowering overall manufacturing costs while maintaining part quality. System integration and flexible inventory handling As part of an ISO turning system, the insert fits into standard external holders, boring bars and clamping kits, with spare screws and underlays commonly available to complete the assembly. The 4.76 mm plate thickness and 11 mm size provide a compact, stiff cutting edge for a broad range of turning tasks, while the 60° triangular geometry offers three usable cutting corners per side, improving economy per insert and simplifying stock-keeping. Contact Metav Werkzeuge to discuss Tungaloy TNMG inserts, select the right grade for the application and secure supplies for consistent production. Technical Data Article number: 6782306 SKU: 6782306-Tungaloy Manufacturer SKU: TUN6782306 Label: TNMG110402 T9215 Tungaloy-Wendeplatte Manufacturer item number: 6782306 Material: carbide Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Size: 11 mm Plate thickness: 4.76 mm Nose radius: 0.2 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Materials & Special features CVD-coated carbide (T9215) Double-sided chipbreaker Triangular plate form ISO-standard insert Suitable for medium steel machining Designed for continuous to lightly interrupted cuts FAQ How does this insert perform on medium steel? The TNMG110402 in grade T9215 is engineered for medium steel machining, delivering extended wear resistance and good fracture toughness for productive turning operations. Is the insert compatible with standard TNMG holders? Yes. The insert conforms to ISO TNMG dimensions and secures via a cylindrical hole, ensuring compatibility with standard external holders and boring bars that accept TNMG inserts. How many cutting edges are available per insert? The triangular TNMG geometry provides three corners per side; with a double-sided plate this yields multiple indexable edges, improving cost-effectiveness per insert. Can this insert handle light interruptions in the cut? The CVD-coated T9215 grade is suitable for continuous to slightly interrupted cuts, combining wear resistance with enough toughness to withstand minor interruptions without frequent edge failure. What is the primary advantage of the double-sided chipbreaker? The double-sided chipbreaker helps control chip formation and cutting forces, which enhances process stability and contributes to a consistent surface finish on turned components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and the familiar TNMG110402 geometry for steady, productive turning operations; the grade suits medium-to-heavy steel and provides improved toughness for interrupted cuts. The insert’s 0.2 mm corner radius and double-sided chipbreaker deliver consistent chip control and extended tool life. Order the TNMG110402 T9225 insert directly via Metav Werkzeuge or ask our consultants for application support. TNMG110402 T9225 TNMG indexable insert for Turning by Tungaloy TNMG110402 T9225 is an ISO‑compliant triangular indexable insert designed for external and internal turning in steel machining applications ISO-compliant TNMG geometry for broad holder fit CVD-coated carbide grade T9225 for robust cutting Double-sided chipbreaker for interrupted cuts 0.2 mm corner radius and 4.76 mm plate thickness Improve cycle stability and productivity with proven geometry The triangular indexable insert combines a standard ISO profile with a 60° cutting edge to provide reliable seating and repeatable positioning in ISO toolholders. The CVD coating on the carbide substrate enhances wear resistance while retaining toughness, meaning fewer tool changes and more consistent component dimensions. For production environments that require stable cycle times, this geometry supports predictable results across varying feed rates and engagement conditions. Better chip control and extended tool life under mixed conditions A double-sided chipbreaker matched to the T9225 grade gives controlled chip formation even during slightly interrupted cuts, reducing the risk of edge damage. The 0.2 mm corner radius offers a compromise between edge strength and surface finish; this small radius increases resistance to chipping while permitting fine surface qualities on turned shafts. In practice, the combination of grade and chipbreaker reduces downtime and contributes to lower unit costs through longer life per index. Compatibility with ISO tool systems and straightforward logistics Compatibility with holders depends on form, clearance angle, tolerance class, attachment, size and thickness; the ISO designation ensures broad interchangeability in common clamping systems. The insert is supplied with a cylindrical hole, enabling secure fastening and easy indexing in standard TNMG seats. For workshops managing multiple insert styles, the ISO standardisation simplifies inventory and reduces the risk of mounting errors. Suited for medium-to-heavy steel turning where toughness matters The T9225 grade is a robust universal choice for medium-to-heavy steel machining where varying entry conditions demand increased toughness. The CVD-coated carbide balances wear resistance and fracture toughness, making it suitable for both continuous and slightly interrupted turning tasks. For users seeking a dependable general‑purpose solution, this insert supports productive machining with predictable tool life and surface quality. For application guidance or to request technical matching for specific holders, contact Metav Werkzeuge — Metav Werkzeuge can advise on clamp sets, spare screws and optimal cutting parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6787108 Manufacturer SKU: TUN6787108 SKU: 6787108-Tungaloy Model series: ISO turning indexable inserts Designation: TNMG110402 T9225 Tungaloy-insert Core data Geometry / ISO code: 110402 Insert shape: triangular, 60° Corner radius: 0.2 mm Plate size: 11 mm Plate thickness: 4.76 mm Clearance (relief) angle: 0° Hole: with cylindrical hole Grade: T9225 Special features Material: carbide (CVD-coated) Chipbreaker: double-sided Application: external and internal turning Best suited for: medium-to-heavy steel machining System requirements: compatible ISO holders determined by form, clearance, tolerance, attachment, size, thickness FAQ What materials is this insert best suited for? The TNMG110402 T9225 insert is optimised for medium-to-heavy steel machining, where the T9225 grade provides a balance of wear resistance and toughness. Can the insert handle interrupted cuts? Yes. The double-sided chipbreaker and the robust T9225 carbide make this indexable insert suitable for slightly interrupted cuts and variable engagement conditions. How is compatibility with toolholders determined? Compatibility is defined by the ISO form, the clearance angle (0° relief in this case), tolerance class, attachment method, size and plate thickness; matching these ensures correct seating of the insert. Is the coating specified, and what does it provide? The insert features a CVD coating on a carbide substrate, which increases wear resistance while maintaining the toughness required for reliable performance in steel turning. Does the insert include a locating hole and what type is it? Yes; the insert is supplied with a cylindrical hole, enabling secure fastening in standard TNMG seats. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated T9225 carbide and the precise 0.2 mm corner radius of this ISO turning insert for reliable medium-to-heavy steel machining; order directly via Metav Werkzeuge or consult their specialists for process matching. TNMG 110402 T9225 ISO turning insert — Tungaloy, CVD-coated carbide, 60° triangle The TNMG110402 T9225 is an ISO-standard turning insert designed for external and internal turning applications, offering a robust CVD-coated carbide grade for interrupted cuts and varying engagement conditions. Robust CVD-coated carbide T9225 ISO TNMG110402 triangular insert 0.2 mm corner radius for precise finish Double-sided chipbreaker with cylindrical hole Maximise productivity with a tough universal grade The CVD-coated T9225 carbide grade provides a balance of toughness and wear resistance suitable for medium to heavy steel turning, making it a reliable choice when cutting conditions change or light interruptions occur. The coating enhances thermal stability and reduces flank wear, which supports longer tool life under demanding cycles. By choosing a universal grade, workshops reduce tool change frequency and simplify inventory while maintaining consistent metal removal rates and process stability. Geometry that enhances surface quality and repeatability A 60° triangular shape combined with a 0.2 mm corner radius and a 0° relief angle delivers a stable edge for improved surface finish and dimensional control. The insert’s 4.76 mm thickness and size 11 format contribute to rigidity in the cutting zone; the cylindrical hole ensures secure clamping in compatible holders. The double-sided chipbreaker enables economical use of both faces before replacement, while the geometry supports predictable chip formation — an essential factor for reproducible results on turned parts. System compatibility and practical workshop benefits The insert is part of an ISO-series system and must be paired with the appropriate external holder, boring bar, backing shim/clamp set and replacement screws to guarantee correct seating and cutting performance. Compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness, so selection should match the holder design and machining strategy. Using this indexable solution reduces setup time and offers flexibility across turning operations, supporting efficient batch changes and steady production throughput. Discuss application-specific recommendations for the Tungaloy T9225 insert with Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply Technical data Article number: 6966204 SKU: 6966204-Tungaloy Manufacturer item number: TUN6966204 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TNMG110402 Grade: T9225 Corner radius: 0.2 mm Thickness: 4.76 mm Insert size: 11 Angle: 60° Relief angle: 0° Special features CVD-coated carbide Triangular insert, double-sided chipbreaker With cylindrical hole for secure clamping Designed for turning (external and internal) Compatible with ISO external holders, boring bars, backing shims/clamps and replacement screws FAQ What materials is this insert suited for? The TNMG110402 T9225 insert is formulated as a robust universal grade for medium to heavy steel machining, providing toughness for interrupted cuts and variable engagement. How does the T9225 coating affect performance? The CVD coating on the T9225 grade improves thermal resistance and wear behaviour, supporting longer edge life and more consistent cutting under fluctuating load conditions. What determines compatibility with a holder? Compatibility is defined by the insert form, relief angle, tolerance class, attachment method, size and thickness; matching these parameters ensures correct seating and reliable clamping. Is the insert reversible or single-sided? This triangular insert features a double-sided chipbreaker, allowing reuse of both faces before disposal or re-grading, which improves utilitarian economy. Which system components are required for installation? A corresponding ISO external holder or boring bar, a backing shim/clamp set and the appropriate replacement screws are part of the system build to secure the insert correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 grade and the ISO-compliant TNMG geometry for reliable medium-to-heavy steel turning; the CVD-coated carbide substrate and double-sided chipbreaker ensure stable chip control and extended edge life. Order the inserts directly via Metav Werkzeuge or ask our consultants for application support. TNMG 110402 T9225 turning insert — TNMG series for turning, Tungaloy TNMG 110402 T9225 is an ISO-format triangular turning insert designed for medium-to-heavy steel machining with good toughness for variable engagement ISO TNMG 110402 geometry, 60° included angle CVD-coated carbide grade T9225 Triangle shape, 11 mm inscribed circle Cylindrical hole, double-sided chipbreaker Consistent performance under changing cutting conditions The combination of a CVD-coated carbide substrate in grade T9225 with the TNMG geometry delivers a balance of toughness and wear resistance that is particularly suitable for interrupted cuts and variable engagement. The coating improves thermal stability and flank wear resistance while the carbide core provides the necessary edge strength for medium-to-heavy steel turning. This results in fewer indexings and more stable cycle times, supporting higher component throughput and predictable tool-change intervals. Seamless integration with ISO tooling systems Compatibility with toolholders depends on shape, clearance angle, tolerance class, clamping and thickness; this insert matches ISO TNMG specifications for simple integration. The insert has an 11 mm inscribed circle and a plate thickness of 4.76 mm, with a 60° included angle and a 0° clearance face configuration that fits standard TNMG holders. The cylindrical hole and fastening dimensions follow ISO conventions, allowing quick replacement and reliable clamping without custom adaptations. Geometry and chip control that protect surface finish The double-sided chipbreaker and a 0.2 mm corner radius are tailored to maintain controlled chip formation and to reduce cutting forces during turning operations. For finishing passes the small corner radius helps achieve improved surface quality, while in roughing the robust insert geometry and chipbreaker help evacuate chips and prevent built-up edge. These design choices contribute to process security and repeatable part quality when paired with appropriate cutting parameters. Practical benefits for setup and productivity As an indexable insert, the triangular shape offers multiple indexing positions, extending usable life per insert. The T9225 grade was developed for productive machining across a broad range of steels and for situations where occasional interruptions demand higher toughness. Choosing this insert reduces downtime from frequent tool changes and supports higher machine utilisation. For specific operation windows, the insert’s specification allows straightforward selection of feeds and speeds to balance tool life and cycle time. For precision turning with Tungaloy T9225 inserts and guidance on optimal holder choice, contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge will assist with application recommendations and availability. Technical data Article number: 6787100 Manufacturer SKU: TUN6787100 SKU: 6787100-Tungaloy Name: TNMG110402 T9225 Tungaloy insert Dimensions & core data Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Materials & special features Material: carbide Coating / grade: CVD-coated, T9225 Application: turning Insert form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TNMG110402 T9225 insert is designed primarily for steel machining and performs well in medium-to-heavy turning where toughness and stable chip control are required. Can the TNMG110402 be used for interrupted cuts? Yes — the T9225 grade provides enhanced toughness for interrupted cuts and variable engagement, reducing the risk of edge chipping. How does the chipbreaker affect performance? The double-sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation, which supports consistent surface finish and reduces heat at the cutting edge. Is the insert reversible or single-use per edge? The triangular TNMG format offers multiple usable edges; the double-sided design provides additional indexing positions before disposal, improving cost-efficiency per edge. Which holder characteristics must match for correct fit? Compatibility requires matching the TNMG form, clearance angle (0°), size (11 mm inscribed circle), thickness (4.76 mm), and the cylindrical hole and fastening type to ensure proper clamping and tolerance fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Combining a universal, PVD-coated carbide grade with a compact triangular form yields a reliable turning solution for medium-duty machining of stainless steel. The AH6225 grade offers a sharp yet stable cutting edge and a double-sided chipbreaker for predictable chip control; order the inserts via Metav Werkzeuge or consult the technical team for application-specific guidance. TNMG 110404 AH6225 — Turning insert, PVD-coated carbide by Tungaloy TNMG 110404 AH6225 is an ISO-format triangular indexable insert for turning, optimised for stainless steel and general-purpose external and internal machining. PVD-coated carbide AH6225 grade Optimised for stainless steel machining Double-sided chipbreaker for chip control ISO TNMG 110404 triangular format Greater process reliability through material and grade The combination of a PVD coating and a carbide substrate delivers consistent wear resistance and thermal stability during medium-duty operations. The AH6225 grade is designed for a balance between a sharp cutting edge and sufficient edge strength; this reduces flank wear while maintaining form accuracy. For workshops processing stainless steel, the coated substrate minimises built-up edge and helps to sustain surface finish over longer tool life. The insert format is compatible with standard ISO toolholders, so integration into existing tool systems is straightforward and predictable. Predictable chip control and repeatable geometry A double-sided chipbreaker built into the insert geometry ensures reliable chip formation across a range of cutting parameters, simplifying process set-up and reducing cycle-time variation. The triangular shape with a nominal 0.4 mm corner radius and an included angle of 60° provides a stable seating and repeatable positioning in the holder. These geometric choices support consistent component tolerances and make the insert suitable for both external turning and some internal operations when combined with the appropriate boring bar. Practical benefits for shop-floor productivity Using an indexable format reduces downtime for tool changes and keeps inventory manageable; each reversible insert offers two usable edges. The triangular design and central fastening hole (cylindrical style) ensure secure clamping and repeatable alignment. Where frequent tool changes or mixed-batch production occur, the ability to select a universal grade like AH6225 simplifies tooling decisions while maintaining performance across varying cutting conditions. Compatibility with ISO-standard holders means straightforward retrofit into existing setups without additional adaptation. Contact Metav Werkzeuge for tailored application advice on Tungaloy TNMG110404 AH6225 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com for machining recommendations and availability Technical data Article number: 6947344 Manufacturer item number: 6947344 SKU: 6947344-Tungaloy Manufacturer SKU: TUN6947344 Model series: ISO turning indexable inserts Material: carbide Numbers / Core technical data Corner radius: 0.4 mm Included angle: 60° Thickness: 4.76 mm Inscribed circle / size: 11 mm Format: TNMG 110404 Designs / Special features Coating: PVD Grade: AH6225 (universal for stainless steel) Chipbreaker: double-sided Shape: triangular, with cylindrical hole Application: turning — external and internal where applicable Compatibility: ISO-standard indexable insert holders FAQ What materials is this insert suitable for? The TNMG 110404 AH6225 insert is specified for machining stainless steel and performs well across a broad range of stainless-grade alloys under medium-duty conditions. How does the AH6225 grade affect tool life? AH6225 combines a PVD coating with a carbide substrate to extend edge life in variable cutting conditions; the result is steady wear behaviour and improved interval between indexings. Is the insert reversible and how many cutting edges are available? The triangular TNMG format is double-sided, offering multiple usable edges per insert and therefore reducing tooling change frequency. Does the TNMG 110404 require a specific holder? The insert conforms to ISO dimensions and secures with a cylindrical-hole clamping system; it is compatible with standard ISO TNMG-capable holders when form, relief angle and tolerance class match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade and the proven double-sided chipbreaker for stable chip formation and consistent medium-duty performance; compatibility with ISO holders ensures straightforward integration into existing turning systems. Order the TNMG110404 AH6225 insert or consult Metav Werkzeuge for application advice and availability. TNMG 110404 AH6225 Turning Insert for Turning – Tungaloy The TNMG110404 AH6225 is a triangular ISO turning insert designed for external and internal turning, offering a balanced combination of a sharp, stable cutting edge and universal performance on stainless steels. PVD-coated carbide AH6225 grade Compatible with ISO TNMG 110404 holders Double-sided chipbreaker for consistent chips 0.4 mm corner radius with 60° triangle Consistent chip control for stainless steel turning The PVD-coated AH6225 grade is formulated to deliver stable chip formation when machining stainless steel, where workpiece adhesion and built-up edge are common challenges. The insert’s double-sided chipbreaker promotes predictable chip flow and reduces the risk of long, entangling chips during medium cutting depths. With a 0.4 mm corner radius and 60° triangular geometry, the geometry supports a controlled cut and repeatable contact conditions, which helps maintain surface finish consistency and reduces the need for frequent process adjustments. Predictable tool life and easy integration into ISO systems Designed as an ISO-standard indexable insert, the component is reversible and compatible with a wide range of turning holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The insert’s PVD-coated carbide substrate combines edge sharpness with wear resistance to withstand variable cutting conditions. The presence of a cylindrical hole and a plate thickness of 4.76 mm aids secure clamping and repeatable seating, supporting stable cutting performance and simplified indexation for economical tool utilisation. Practical selection and operational benefits As a universal grade for stainless steels, this insert suits workshops looking for a versatile solution across varied components and shifting process parameters. Selecting the correct chipbreaker and grade like AH6225 reduces cycle-time variability and improves first-pass yield, which supports production continuity. For specific applications—external turning, inner bore operations or mixed batches—choose the chipbreaker and holder combination that match the part geometry and machine stability. For further guidance on optimum holder pairing or process parameters, Metav Werkzeuge’s technical team provides tailored recommendations. For application advice or to check availability of the TNMG110404 AH6225 insert from Tungaloy, contact Metav Werkzeuge for technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947361 Manufacturer SKU: TUN6947361 Model series: ISO turning inserts Material: carbide Coating/grade: PVD-coated AH6225 Core dimensions ISO designation: 110404 Insert form: triangular 60° Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle/size: 11 mm Clearance angle: 0° Hole: with cylindrical hole Special features and applications Double-sided chipbreaker Universal grade for stainless steel turning Suitable for external and internal turning Compatibility depends on holder form, clearance angle and tolerance class Reversible/indexable insert FAQ What materials is this insert suitable for? The TNMG110404 AH6225 insert is optimised for stainless steel machining and performs well in medium-duty cutting operations where a balance of edge sharpness and wear resistance is required. What does the AH6225 grade indicate? The AH6225 designation denotes a PVD-coated carbide grade engineered to provide a sharp, yet durable cutting edge, helping to maintain surface quality under varying cutting conditions. How is compatibility with a turning holder determined? Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct seat geometry. What advantage does the double-sided chipbreaker bring? The double-sided chipbreaker ensures consistent chip formation, improves repeatability and extends usable cutting edges through reversible indexing, contributing to stable cycle times. Can this insert be used for internal turning operations? Yes, the ISO-design triangular insert is suitable for both external and internal turning, provided the holder and setup allow adequate clearance and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Combine PVD-coated carbide AH6225, a precise ISO TNMG110404 geometry (60° triangle, 0.4 mm corner radius) and a double-sided chipbreaker to achieve consistent turning results on stainless steels; order the TNMG110404 insert directly via Metav Werkzeuge or consult our specialists for application advice TNMG 110404 AH6225 — TNMG indexable turning insert for turning, PVD-coated carbide by Tungaloy A TNMG110404 AH6225 indexable insert engineered for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for medium machining conditions PVD-coated carbide grade AH6225 60° triangular form with 0° relief 0.4 mm nose radius for fine finishing Double-sided chipbreaker, with cylindrical hole Maximised tool life and consistent cutting performance The PVD-bonded AH6225 grade combines a wear-resistant surface with a carbide substrate to extend edge life under the heat and work-hardening typical of stainless steels. The coating stabilises the cutting edge and reduces adhesion, which helps maintain dimensional accuracy across batches. As a result, operators benefit from fewer tool changes and more predictable cycle times. This stability is particularly advantageous in medium machining where a balance between sharpness and robustness is required. The insert’s engineered edge preparation reduces burr formation and supports a reliable surface finish without sacrificing productivity. Designed for simple integration with ISO tooling systems The TNMG geometry follows ISO standards so compatibility with holders is determined by form, relief angle, tolerance class, attachment method, size and thickness. The triangular shape with a 60° included angle and a 0° relief makes the insert broadly compatible with common external and internal turning holders. The central cylindrical hole supports secure clamping and repeatable seating, reducing set-up variation. With standardised dimensions and clear mounting criteria, stocking and tool-change procedures become more efficient, lowering downtime and simplifying logistics in production environments. Practical application advice for predictable results The double-sided chipbreaker provides two usable cutting edges per face, extending the usable life before indexing. The 0.4 mm corner radius offers a compromise between strength and finishing capability—suitable for semi-finishing and finishing passes on stainless steels when combined with appropriate feeds and speeds. For interrupted cuts or less stable set-ups choose a chipbreaker and cutting parameters that favour edge protection; for steady, rigid set-ups the sharper edge geometry gives improved surface quality. Where process reliability is vital, the insert’s combination of a PVD coating, stable grade and standard ISO geometry supports repeatable performance and consistent part quality For reliable stainless-steel turning choose the Tungaloy AH6225 TNMG110404 insert — contact Metav Werkzeuge for personalised application recommendations and order processing at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6903209 Manufacturer SKU: TUN6903209 SKU: 6903209-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core specifications ISO designation: TNMG110404 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Geometry angle: 60° Special features Coating/grade: AH6225 (PVD) Chipbreaker: double-sided Hole: cylindrical hole Shape: triangular Suitable for: external and internal turning Compatibility factors: form, relief, tolerance class, attachment, size, thickness FAQ Which materials is this insert optimised for? The AH6225 grade is formulated and PVD-coated for stainless steels, offering a sharp but stable cutting edge suited to medium machining conditions. What does the ISO code TNMG110404 indicate? The ISO designation TNMG110404 identifies a triangular indexable insert with nominal size 11, a 0.4 mm corner radius and the plate dimensions represented by the 110404 code. How many cutting edges are available before regrinding or replacement? The insert is double-sided with multiple indexable edges; the exact number of usable edges depends on insert indexing and wear but the design extends usable life through reversible indexing. Is the insert suitable for both external and internal turning? Yes, the insert’s geometry and central hole make it suitable for both external and internal turning operations when paired with an appropriate holder. What advantages does the AH6225 PVD coating provide? The PVD coating on the AH6225 grade reduces adhesion, improves wear resistance and helps preserve the cutting edge under variable conditions, enhancing repeatability and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of a robust combination of sharp, stable cutting performance and simple compatibility with ISO toolholders: the PVD-coated AH6225 carbide ensures consistent edge life in variable conditions while the TNMG geometry and 0.4 mm corner radius deliver versatile part quality. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored cutting solutions. TNMG 110404 AH6225 Turning insert (TNMG) by Tungaloy — PVD-coated carbide, 0° clearance A TNMG110404 AH6225 triangular ISO turning insert designed for external and internal turning, optimised for medium finishing operations on rostfreier Stahl. PVD-coated carbide grade AH6225 Universal grade for rostfreier Stahl 0.4 mm corner radius for versatility Triangular TNMG shape with cylindrical hole Stable cutting performance for consistent throughput The combination of a PVD-coated surface and the AH6225 carbide matrix produces a cutting edge that balances sharpness with toughness, reducing flank wear during medium turning operations. This composition is tailored for applications on rostfreier Stahl, where adhesion and built-up edge are common issues; the coating improves lubricity and thermal resistance, while the substrate maintains edge support. The result is a repeatable cutting process with fewer interruptions for edge changes, contributing directly to higher machine utilisation and predictable component quality. Accurate fit and simple indexability for reliable setups Conforming to ISO plate geometry, the triangular insert features a 60° included angle and a 0° clearance angle, making compatibility assessment straightforward: match form, clearance, tolerance class, clamping and thickness to the chosen holder. The insert is double-sided with a cylindrical hole, enabling multiple indexings and secure clamping; plate thickness of 4.76 mm and a plate size of 11 mm provide mechanical stability in most standard external and internal turning tools. This standardisation minimises setup time and reduces the need for bespoke tooling. Practical recommendations for process stability and surface quality For medium machining and variable conditions, select the double-sided chipbreaker variant and pair the insert with a holder suited to the required rigidity. The 0.4 mm corner radius supports a balance between edge strength and surface finish—use the larger radius for improved robustness under interrupted cuts or reduced rigidity, and the smaller effective edge for finer finishes. Given the universal character of the grade, adjust cutting speed and feed to account for the thermal sensitivity of rostfreier Stahl and consider coolant strategies that avoid thermal shock while assisting chip evacuation. These measures extend tool life and maintain consistent dimensional accuracy. Contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to discuss the TNMG110404 AH6225 insert for rostfreier Stahl turning and identify the optimal holder and chipbreaker combination Technical Data Article number: 6947397 Manufacturer article number: 6947397 Manufacturer SKU: TUN6947397 SKU: 6947397-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Material: Hartmetall Facts TNMG ISO designation: TNMG110404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical hole Special features PVD-coated carbide (AH6225) Universal grade for rostfreier Stahl Double-sided chipbreaker Triangular TNMG form With cylindrical hole Suitable for external and internal turning FAQ What materials is this insert intended for? The TNMG110404 AH6225 insert is a universal grade designed primarily for machining rostfreier Stahl; its PVD coating and substrate balance suit variable cutting conditions on this material. How many usable cutting edges does the insert provide? As a triangular, double-sided indexable insert, the TNMG110404 AH6225 offers multiple cutting edges per insert, enabling several re-indexes before replacement. What are the key dimensions to check for holder compatibility? Check the ISO designation TNMG110404, plate thickness (4.76 mm), plate size (11 mm), included angle (60°) and clearance angle (0°) to ensure correct fit and clamping. Is this insert suitable for interrupted cuts or unstable setups? The 0.4 mm corner radius and robust PVD-coated carbide make the insert more tolerant of interrupted cuts than extremely fine-radius geometries, improving edge life in less stable conditions. Can this grade be used for finishing as well as medium machining? Yes; AH6225 offers a compromise between sharpness and edge strength that supports medium finishing. Adjust feeds, speeds and coolant to optimise surface quality on rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6225 grade and a sharp, stable cutting edge for consistent performance in stainless-steel turning; the triangular 60° geometry with a 0.4 mm corner radius provides versatility for both external and internal operations. Order inserts or request application advice via Metav Werkzeuge for quick delivery and process recommendations. TNMG 110404 AH6225 ISO turning insert for external and internal turning (Tungaloy) TNMG 110404 AH6225 is an ISO-standard triangular turning insert engineered for reliable machining of stainless steels in both external and internal turning applications. PVD-coated AH6225 grade for stainless steels 60° triangular geometry for versatile turning 0.4 mm corner radius for defined edge strength Double-sided insert with central cylindrical hole Consistent cutting performance under variable conditions The PVD-coated carbide grade AH6225 combines a sharp cutting edge with edge stability, which translates into repeatable performance when machining stainless steels. The coating supports heat resistance and wear control, reducing flank wear under mixed cutting conditions. Specified as an ISO-standard triangular insert, the geometry ensures predictable chip formation and a stable contact zone. For manufacturers seeking steady component quality and fewer tool changes, this combination reduces process variability and supports efficient cycle times. Easy integration into ISO turning systems for productivity gains Designed with ISO code 110404, the insert fits standard triangular holders when form, clearance angle, tolerance class, fixing method, size and thickness match. The central cylindrical hole and double-sided design enable quick indexing and economical use of the cutting edges. Measurable parameters such as the 0.4 mm corner radius, 4.76 mm plate thickness and 60° cutting angle make setup and repeatability straightforward. Clear specification of these values supports fixture choice and minimises trial-and-error during process planning, helping maintain machine uptime. Practical selection and application advice for improved results The double-sided chipbreaker and the universal AH6225 grade make the insert suitable for a range of turning operations on stainless steels, especially where a balance of edge sharpness and robustness is required. Selecting the correct chipbreaker and grade according to material condition and stability of the machining setup improves surface finish and reduces rework. The insert’s triangular form offers accessibility in confined contours, while the defined corner radius helps manage cutting forces for medium-duty operations. For stable production, match holder rigidity and cutting parameters to the insert’s specifications. For application support or to procure original Tungaloy inserts, please contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt supply. Technical data Article number: 6966242 Manufacturer SKU: TUN6966242 Label: TNMG110404 AH6225 Tungaloy-Wendeplatte Brand: Tungaloy Material: carbide Facts ISO designation: 110404 Corner radius: 0.4 mm Thickness: 4.76 mm Size: 11 mm Cutting angle: 60° Special features PVD-coated carbide grade AH6225 Double-sided with chipbreaker Central cylindrical hole ISO-standard triangular insert Suitable for external and internal turning Intended for stainless steels FAQ What materials is this insert designed for? The TNMG110404 AH6225 insert is developed primarily for machining stainless steels and offers a universal response to varying cutting conditions. How does the AH6225 grade improve tool life? AH6225’s PVD coating and carbide substrate combine to reduce wear and support a stable cutting edge, which enhances tool life in medium-duty stainless-steel turning. Is the insert indexable and economical? Yes, the insert is double-sided with a central cylindrical hole for secure clamping and economical indexing of multiple cutting edges. Which holder characteristics must be checked for compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness; matching these ensures correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 carbide grade, a 0.4 mm nose radius and ISO conformity for predictable mid-range performance in rostfreier Stahl turning; order directly via Metav Werkzeuge or consult our advisers for application-specific guidance. TNMG 110404 AH6225 — Tungaloy turning insert for turning The TNMG110404 AH6225 is an ISO-standard triangular turning insert engineered for external and internal turning, offering a sharp yet stable cutting edge for variable stainless-steel machining conditions. ISO TNMG110404 triangular insert PVD-coated AH6225 carbide grade Optimised for rostfreier Stahl machining 0.4 mm nose radius, 60° included angle Consistent productivity through a balanced grade and coating The combination of a PVD-coated surface and the AH6225 carbide grade delivers a balanced response between wear resistance and edge sharpness. This configuration is designed to maintain a reliable cutting edge under changing conditions, reducing tool-change frequency and increasing uptime. The coating helps to lower adhesive wear and improves thermal stability, while the substrate keeps flank strength; together they support sustained cutting in moderate feeds and speeds, making the insert particularly suitable for applications where both surface quality and tool life matter. Fast integration with ISO tooling systems for reduced set-up time As an ISO-designated insert, compatibility is determined by form, relief angle, tolerance class, clamping and dimensions. The insert’s triangular form with a 60° included angle, 0.4 mm nose radius and 4.76 mm thickness fits holders designed for TNMG geometry and an insert size of 11 mm. The central cylindrical hole and double-sided chipbreaker allow secure clamping and reversible use, which minimises inventory while simplifying replacement. Clear identification of these attributes accelerates tool selection and shortens machine downtime when changing or replenishing cutting edges. Application range and practical guidance for reliable outcomes This grade and geometry are specified for machining rostfreier Stahl and comparable alloys in medium-duty turning operations. The double-sided chipbreaker offers versatility: select the chipbreaker variant and cutting parameters to match workpiece material, stability and required surface finish. The small nose radius contributes to improved surface integrity on finishing passes while retaining edge robustness for semi-finishing. If further process optimisation is required, cutting-parameter data and holder compatibility details can be consulted to ensure repeatable results. For application-tailored recommendations or to order TNMG 110404 AH6225 inserts from Tungaloy through Metav Werkzeuge, request cutting-parameter advice or place an order via Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6966217 Facts Radius: 0.4 mm Insert thickness: 4.76 mm Insert size: 11 mm Included angle: 60° Relief angle: 0° Manufacturer SKU: TUN6966217 Special features Shape: triangular Hole: with hole (cylindrical hole) Chipbreaker: double-sided Coating / grade: AH6225, PVD-coated Material: carbide Application: Turning Model series: ISO turning inserts Suitable for: rostfreier Stahl FAQ What materials is this insert primarily intended for? The TNMG110404 AH6225 insert is optimised for machining rostfreier Stahl, offering a balance between edge sharpness and wear resistance suited to stainless-steel turning. What are the key dimensions and form of this insert? The insert is a triangular ISO TNMG form with an 11 mm size, 4.76 mm thickness, 0.4 mm nose radius and a 60° included angle, identified as TNMG110404 AH6225 (SKU TUN6966217). Is the insert reversible and how is it secured in the holder? Yes; the insert features a double-sided chipbreaker and a central cylindrical hole for secure clamping, enabling reversible use to extend service life. Which toolholders will fit this insert? Holders that accept ISO TNMG inserts sized for 11 mm and 4.76 mm thickness with a 60° included angle and 0° relief will be compatible; verify clamping geometry and tolerance class when matching a holder. How should the chipbreaker and parameters be chosen for best results? Select the chipbreaker and cutting data in line with workpiece material, rigidity and desired surface finish; the AH6225 grade is intended for medium cutting conditions and variable loads to provide consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6225 Wendeplatten - Tungaloy
Combine the universal AH6225 PVD-coated carbide grade with a 60° TNMG geometry and a 0.4 mm corner radius for reliable medium turning of rostfreier Stahl; order directly via Metav Werkzeuge or contact our consultants for application advice. TNMG110404 AH6225 Tungaloy indexable turning insert for turning, PVD-coated carbide, 60° A TNMG110404 AH6225 indexable turning insert designed for external and internal turning, offering a sharp yet stable cutting edge for medium machining conditions. TNMG shape with 60° included angle PVD-coated carbide grade AH6225 0.4 mm corner radius for precise profiles Double-sided insert with cylindrical hole Engineered for consistent medium turning performance The TNMG geometry with a 60° included angle and a 0.4 mm corner radius delivers predictable cutting behaviour in interrupted and steady cuts. The PVD-coated carbide composition provides a balance between wear resistance and edge sharpness, enabling longer tool life under varying conditions. For applications in rostfreier Stahl the combination of a robust substrate and a wear-resistant coating reduces flank wear and improves process stability during medium finishing and semi-finishing operations. Simple integration and dependable edge stability Compatibility with holders is governed by form, relief angle, tolerance class, fastening, size and thickness; this design follows ISO conventions to ensure interchangeability with standard external holders and boring bars. The triangular plate shape and double-sided format maximise indexable edges per plate, while the cylindrical hole and defined thickness of 4.76 mm facilitate secure clamping. These mechanical features reduce set-up time and encourage repeatable results on the shop floor, promoting efficient changeover and predictable cycle times. Application guidance and material suitability This grade is formulated as a universal option for rostfreier Stahl and is optimised for stable cutting edges under medium cutting parameters. The AH6225 specification supports a wide range of stainless alloys where balanced wear resistance and toughness are required. Select a matching chipbreaker profile according to workpiece material and desired surface finish; the double-sided chipbreaker arrangement gives flexibility for varied cutting strategies while keeping inventory low. For reliable turning performance choose original Tungaloy inserts from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical matching. Technical data Article number: 6903202 Manufacturer SKU: TUN6903202 SKU: 6903202-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: TNMG110404 Numbers / Core technical data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 Included angle: 60° Relief angle: 0° Special features Material: carbide Coating / grade: AH6225 (PVD-coated) Plate shape: triangular Hole style: cylindrical hole Chipbreaker: double-sided Typical use: external and internal turning Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert suitable for? The TNMG110404 AH6225 Tungaloy turning insert is intended primarily for rostfreier Stahl and performs well across a broad range of stainless alloys. How many cutting edges does the insert provide? With its triangular form and double-sided design, the TNMG110404 delivers multiple indexable edges to extend usable life per plate. What mounting features ensure repeatable clamping? The insert includes a cylindrical hole for secure fastening and conforms to ISO dimensional standards to aid repeatable clamping in compatible holders. Which cutting applications match this grade best? The PVD-coated AH6225 grade is optimised for medium finishing and semi-finishing operations where a stable, sharp edge is required under varying cutting conditions. Is the insert compatible with standard TNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and thickness; the TNMG110404 follows ISO conventions to ensure broad interchangeability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH6235 Wendeplatten - Tungaloy
Benefit from a robust PVD-coated AH6235 grade and the ISO TNMG110404 triangular geometry for reliable turning of stainless steels and interrupted cuts; order directly via Metav Werkzeuge or request application advice from our consultants. TNMG 110404 AH6235 Tungaloy Turning Insert — PVD-coated carbide, 60° triangular A TNMG110404 AH6235 insert for ISO-standard external and internal turning, optimised for stainless steels and interrupted cutting conditions ISO 110404 triangular insert for turning PVD-coated AH6235 grade for stainless steel Double-sided chipbreaker for interrupted cuts 4.76 mm plate thickness, 60° cutting geometry Consistent performance for stainless-steel turning The combination of a PVD-coated surface and the AH6235 carbide composition delivers a balance of toughness and wear resistance suited to machining stainless steel and other demanding alloys. The coating improves substrate protection at elevated temperatures, while the tougher base metal reduces the risk of edge fracturing during interrupted cuts. As a result, the insert offers enhanced process reliability and fewer unplanned tool changes, which contributes to steady production flow and predictable cycle times. The ISO-format triangular design further supports repeatable positioning and straightforward indexation when a new cutting edge is required. Less downtime through superior chip control and geometry Built with a double-sided chipbreaker, this insert improves chip control under variable cutting conditions, helping to avoid entanglement and assisting stable evacuation of material. The 60° geometry and a 0.4 mm nose radius promote a favourable contact zone between tool and workpiece, which supports consistent surface finish and extended tool life when combined with correct feeds and speeds. The insert’s triangular form and cylindrical hole ensure secure clamping in compatible holders; this mechanical stability reduces vibration and contributes to repeatable dimensional accuracy in both external and internal turning operations. Flexible integration and clear selection guidance As an ISO-format indexable insert, compatibility with the clamping system is determined by form, relief angle, tolerance class, fastening method, size and thickness; selecting the matching holder and clamp set simplifies assembly and minimises setup time. The insert is particularly suitable where a tougher grade is preferable, for example in interrupted cuts or where increased breakout risk exists. For shops moving between materials or component families, the combination of ISO-standard format and the AH6235 grade allows pragmatic grade-and-chipbreaker choices to match stability and surface-quality requirements, giving a practical route to improved productivity without extensive retooling. Contact Metav Werkzeuge to discuss how the TNMG110404 AH6235 insert can improve process stability and tool life; our consultants will advise on the optimal holder, chipbreaker and machining parameters for the application. Technical Data Article number: 6903396 Manufacturer: Tungaloy Manufacturer SKU: TUN6903396 Designation: TNMG110404 AH6235 Tungaloy insert Facts Nose radius: 0.4 mm Cutting angle: 60° Plate thickness: 4.76 mm Plate size: 11 mm Relief angle: 0° Special features PVD-coated carbide grade AH6235 ISO-format turning indexable insert Triangular plate form Cylindrical hole for secure clamping Double-sided chipbreaker Application: turning (external and internal), interrupted cuts FAQ What materials is this insert best suited for? The TNMG110404 AH6235 insert is designed primarily for stainless steel and other alloys where a tougher grade reduces the risk of edge breakage during interrupted cutting. How does the AH6235 grade affect tool life? AH6235’s combination of a tough carbide substrate with a PVD-coated surface improves resistance to chipping while maintaining wear protection, which can extend usable edge life under unstable cutting conditions. Is the insert compatible with standard ISO TNMG holders? Yes, the TNMG110404 format follows ISO conventions; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness, so matching the holder and clamp set is recommended. What advantage does the double-sided chipbreaker give? The double-sided chipbreaker enhances chip control for varying cutting regimes and supports stable evacuation, reducing the chance of tangling and aiding consistent surface finish. Can this insert be used for both external and internal turning? The insert’s triangular geometry and secure clamping via the cylindrical hole make it suitable for both external and internal turning when the correct holder and tool overhang are applied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide durability and precise 60° triangle geometry for consistent turning results; the insert’s secure cylindrical hole and ISO-compliant form reduce downtime through reliable clamping. Order the original Tungaloy solution directly via Metav Werkzeuge or consult the technical team for application matching. TNMG 110404 AH8015 Turning insert by Tungaloy — PVD-coated carbide, 60° triangle TNMG110404 AH8015 is an ISO-style indexable turning insert for general-purpose external and internal turning of heat‑resistant alloys. PVD-coated carbide suited to heat-resistant alloys 60° triangle geometry for robust turning 0.4 mm corner radius for fine surface finish Cylindrical hole for secure, form-positive clamping High-performance grade for heat-resistant alloys and long tool life The AH8015 grade is a PVD-coated carbide formulated as a first choice for the general machining of heat‑resistant alloys. The coating provides a balanced combination of wear resistance and cutting-edge stability, which translates into longer effective tool life and fewer insert changes in production runs. In practice, this means higher process efficiency and predictable performance when machining alloys that demand thermal stability. ISO compatibility and secure clamping to minimise downtime Designed to ISO dimensions, the insert’s compatibility depends on geometry, clearance angle, tolerance class, fastening and thickness. The 60° triangle shape and cylindrical hole ensure a positive, repeatable fit in standard holders and boring bars. With a plate thickness of 4.76 mm and ISO sizing, replacement is straightforward and inventory management is simplified. Secure clamping reduces the risk of movement under load, improving dimensional consistency and cutting reliability. Geometry and chip control for surface quality and productivity A 0.4 mm corner radius balances edge strength and the ability to produce a refined surface finish at moderate feeds. The insert is fitted with a double-sided chipbreaker to support chip formation appropriate to the material and cutting parameters, helping to avoid stringy chips and improving evacuation. For external and internal turning operations, this geometry helps maintain cutting stability and reduces the need for rework, supporting continuous production with consistent part quality. Practical guidance for selection and process alignment Select the chipbreaker and grade according to workpiece material, machining method and setup stability; the insert’s PVD-coated carbide composition is optimised for heat‑resistant alloys but performs well across a range of demanding substrates. The ISO format makes it simple to match to holders by form and clamping style. For traceability and ordering, the item is available as TNMG110404 AH8015 (manufacturer SKU TUN6947398), ensuring users procure the correct grade and geometry for their turning tasks. Contact Metav Werkzeuge today to discuss integrating the Tungaloy TNMG110404 AH8015 insert into the production line or to request technical matching; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: 6947398 Manufacturer SKU: TUN6947398 Model series: ISO turning indexable inserts Material: carbide Grade / coating: AH8015 (PVD) Product designation: TNMG110404 AH8015 Dimensions / Core data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Diamond/triangle angle: 60° Clearance (relief) angle: 0° Features / Applications Cylindrical hole for secure clamping Triangular (three‑corner) insert, ISO designation Double-sided chipbreaker design Suitable for external and internal turning First choice for machining heat‑resistant alloys FAQ What materials is this insert designed for? The TNMG110404 AH8015 insert is optimised for heat‑resistant alloys; the PVD-coated carbide composition also provides robust performance across other demanding materials. How does the insert‘s geometry affect machining? The 60° triangle geometry combined with a 0.4 mm corner radius offers a balance between edge strength and surface finish, making it suitable for both finishing and light to medium turning tasks. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness but the cylindrical hole supports reliable clamping. What advantage does the PVD coating provide? PVD coating on the AH8015 grade enhances wear resistance and edge stability at elevated temperatures, extending effective tool life in demanding turning operations. Can the insert be used for internal turning? Yes. The TNMG110404 AH8015 is suitable for both external and internal turning when matched with a compatible boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH8015, the ISO TNMG110404 form and a double-sided chipbreaker for stable, economical turning of heat-resistant alloys; order the TNMG110404 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110404 AH8015 TNMG ISO turning insert — PVD-coated carbide for turning, Tungaloy The TNMG110404 AH8015 is an ISO triangular indexable insert designed for precision external and internal turning of heat-resistant alloys and general turning applications. ISO TNMG 110404 form, 60° triangle PVD-coated carbide grade AH8015 Double-sided chipbreaker for stable cuts Cylindrical hole compatible with ISO holders Consistent cutting performance for heat-resistant alloys The insert’s PVD-coated carbide substrate, specified as AH8015, delivers a balanced combination of wear resistance and edge stability that is suited to machining heat-resistant alloys. A PVD coating reduces flank wear and extends tool life under elevated temperatures; the result is more predictable cycle times and fewer tool changes. For production environments the main benefit is reduced downtime and improved throughput while maintaining surface integrity on demanding materials. Predictable fit and installation for ISO holders Built to the ISO TNMG110404 form, the triangular insert ensures straightforward compatibility with standard external holders and boring bars when the holder matches the form, clearance and tolerance class. The insert features a cylindrical hole and is double-sided, allowing indexation for two cutting edges and economical use of the insert body. Specified dimensions such as 11 mm size and 4.76 mm thickness support consistent clamping and repeatable positioning, reducing set-up variability on the shop floor. Chip control and stable cutting geometry The double-sided chipbreaker is engineered for controlled chip formation during both roughing and finishing passes, which lowers the risk of built-up edge and improves tool life. The 0.4 mm corner radius and a 60° cutting angle help maintain edge strength for interrupted cuts and variable engagement depths. Combined with the insert’s balanced grade, these features contribute to steady material removal rates and reproducible surface quality in serial production. Operational advantages and selection guidance Selecting the AH8015 grade in this insert offers a cost-efficient compromise between longevity and edge support for a wide range of steels and heat-resistant alloys. For heavy interrupted cuts or highly abrasive materials, consider a grade optimised specifically for extreme wear resistance; for general-purpose turning the TNMG110404 AH8015 provides reliable performance and consistent results. Application engineers can advise on feed and speed windows to match machine rigidity and workpiece stability. Contact Metav Werkzeuge to source the TNMG110404 AH8015 insert or request tailored application advice; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast support and delivery. Technical Data Article number: 6966218 Manufacturer SKU: TUN6966218 Merchant SKU: 6966218-Tungaloy Model series: ISO turning indexable inserts ISO designation: TNMG110404 AH8015 Facts Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Special features Shape: triangular Coating: PVD Material: carbide Chipbreaker: double-sided Hole: cylindrical, with hole Application: turning Grade: AH8015 FAQ What materials is this insert best suited for? The TNMG110404 AH8015 insert is designed primarily for heat-resistant alloys and general turning tasks; its PVD-coated AH8015 carbide supports a broad material range while balancing wear resistance and edge stability. How does the double-sided chipbreaker affect production? A double-sided chipbreaker on this indexable insert improves chip control for both roughing and finishing, extending edge life and promoting consistent surface quality during continuous production runs. Can the TNMG110404 be used in any ISO TNMG holder? Compatibility depends on matching the holder’s form, clearance, tolerance and clamping method; the ISO TNMG110404 form and cylindrical hole facilitate fitment with standard TNMG holders when those parameters align. What are the key dimensions to check before ordering? Important dimensions include the 11 mm insert size, 4.76 mm thickness and 0.4 mm corner radius, together with the 60° geometry — these determine clamping, edge strength and the insert’s suitability for the intended turning operation. Is the insert indexable and how many cutting edges are available? The TNMG110404 AH8015 is double-sided and indexable, providing two usable cutting edges per side when rotated and reclamped according to the holder’s clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, a 0.4 mm corner radius for consistent cutting, and ISO compatibility to maintain steady production and predictable tool life; order the TNMG110404 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 110404 AH8015 Turning insert – PVD-coated carbide, 0.4 mm corner radius (Tungaloy) TNMG 110404 AH8015 is an ISO-standard indexable insert for turning, optimised for machining heat-resistant alloys and general-purpose external and internal turning operations. PVD-coated carbide for heat-resistant alloys 0.4 mm corner radius for controlled cutting ISO-standard triangular insert with hole Balanced wear resistance and edge stability Reliable performance on heat-resistant alloys The AH8015 grade is a PVD-coated carbide formulation selected as a first-choice grade for machining heat-resistant alloys. The coating provides a hard, wear-resistant surface that reduces flank wear and extends edge life under elevated temperatures. For job shops and production environments where repeatability matters, this combination delivers a predictable tool life and reduced need for frequent index changes, supporting a steady production flow and fewer unplanned tool interventions. Geometry that enhances process stability The triangular insert geometry with a 60° included angle and a 0.4 mm corner radius gives a balance between strength and precision. The insert is ISO-standard in form and thickness (4.76 mm), with an inscribed circle of 11 mm and a cylindrical hole for secure clamping; these characteristics make holder compatibility straightforward when the correct tolerance class and clamping system are chosen. The modest corner radius improves edge robustness while still allowing accurate profile work, which benefits both finishing and moderate roughing tasks. System-level advantages for higher productivity As a double-sided chipbreaker insert, the part can be indexed multiple times to extend service life and reduce tooling costs per component. The insert integrates into a system consisting of a matching outer holder or boring bar, a shim/clamp set and replacement screws, enabling rapid swaps and minimal machine downtime. Selecting the appropriate chipbreaker and grade for the component material and machine stability results in improved chip control and surface quality, which translates into higher process reliability and lower rework rates. For reliable machining of heat-resistant alloys, contact Metav Werkzeuge to source the Tungaloy TNMG110404 AH8015 insert, discuss suitable holders and cutting data, or request further technical information — 📧 info@metav-werkzeuge.com / ☎️ +49 2822 7131930 Technical data Article number: 6947345 SKU: 6947345-Tungaloy Manufacturer SKU: TUN6947345 Designation: TNMG110404 AH8015 Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 11 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6947345 Designs / Special features Material: carbide Coating: PVD Chipbreaker: double-sided Hole: cylindrical Shape: triangular Application: turning (external and internal) Grade: AH8015 System components: insert, holder/boring bar, shim/clamp, replacement screws Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert designed for? The TNMG110404 AH8015 insert is designed primarily for machining heat-resistant alloys and performs well on a broad range of tough materials when combined with the correct chipbreaker and cutting parameters. How does the PVD coating benefit tool life? The PVD coating on the TNMG110404 AH8015 provides increased wear resistance and thermal stability, which helps prolong edge life and maintain consistent performance during continuous turning operations. Can this insert be used for both external and internal turning? Yes; as an ISO-standard triangular indexable insert with a cylindrical hole and a double-sided chipbreaker, this insert is suitable for both external and internal turning when mounted in the correct holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide, ISO-standard compatibility and a double-sided chipbreaker for consistent chip control and durable edge life; order the TNMG110404 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110404 AH8015 triangular turning insert by Tungaloy — PVD-coated carbide, 60° angle The TNMG110404 AH8015 is an ISO-standard triangular turning insert designed for external and internal turning of demanding materials, offering a balanced combination of wear resistance and edge stability. PVD-coated carbide grade AH8015 ISO-standard triangular insert, 60° angle Double-sided chipbreaker for consistent chips Cylindrical hole with secure mechanical clamping High-performance grade for heat-resistant alloys and general turning The PVD-coated cemented carbide grade AH8015 delivers a balanced mix of wear resistance and edge stability, making it a first-choice grade for machining heat-resistant alloys and other demanding materials. The protective PVD layer reduces adhesive wear and increases thermal resistance during continuous turning, which translates into longer tool life and more predictable tool-change intervals. For workshop managers and production engineers, this means improved process reliability and fewer unscheduled interruptions. ISO compatibility and secure system fit for stable machining As an ISO-design insert, the part adheres to standard geometries so the insert mates with compatible holders based on form, clearance angle, tolerance class, fixing and size. The triangular geometry combined with a 60° cutting angle and a cylindrical hole ensures stable clamping and repeatable positioning in both external holders and boring bars. The double-sided nature of the insert provides multiple usable edges before disposal, reducing tooling costs per part and simplifying inventory management. When selecting a clamping system, verify holder compatibility with the insert’s size, thickness and hole style for optimal rigidity. Chip control, corner radius and practical machining advice Effective chip control is provided by the double-sided chipbreaker, which promotes consistent swarf formation and safer chip evacuation in turning operations. The corner radius of 0.4 mm aids in producing a good surface finish while maintaining cutting-edge strength for intermittent cuts and light profiling. For best results on heat-resistant alloys, combine a stable machine setup with moderate feeds and the grade’s recommended cutting speeds; this helps to exploit the grade’s thermal resilience and achieve consistent surface quality with reduced tool wear. The insert’s 4.76 mm thickness and 11 mm plate size contribute to mechanical stability during heavier cuts. Contact Metav Werkzeuge today for availability and tailored application advice on Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and fast delivery options. Technical Data Article number: 6966244 Manufacturer SKU: TUN6966244 SKU: 6966244-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Cutting angle: 60° Clearance angle: 0° Manufacturer article number: 6966244 Special features / Designs Grade/coating: AH8015, PVD-coated cemented carbide Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning FAQ What materials is this insert best suited for? The TNMG110404 AH8015 insert is designed primarily for machining heat-resistant alloys and offers a balanced wear resistance and edge stability suitable for a wide range of demanding materials. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker on the TNMG110404 provides consistent chip formation and multiple usable edges, improving chip control and lowering the cost per edge in series production. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing, size and thickness; the ISO-standard geometry of the insert ensures compatibility with holders designed for TNMG110404-style plates. What surface finish can be expected with a 0.4 mm corner radius? A corner radius of 0.4 mm on this insert supports improved surface finish while maintaining sufficient edge strength for light profiling and finishing passes. Is the coating suitable for high-temperature turning conditions? Yes, the PVD coating on the AH8015 grade enhances thermal resistance and reduces adhesive wear, making it suitable for higher-temperature turning applications such as heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 AH8015 Wendeplatten - Tungaloy
Combining the PVD‑coated carbide grade AH8015, a 60° triangular geometry and a 0.4 mm corner radius provides a robust solution for turning heat‑resistant alloys while maintaining consistent tool life and component quality. Order the TNMG110404 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 110404 AH8015 turning insert for turning — Tungaloy, PVD‑coated carbide, 60° TNMG110404 AH8015 is an ISO‑standard triangular turning insert designed for external and internal turning, optimised for general machining of heat‑resistant alloys with a balance of wear resistance and cutting‑edge stability. PVD‑coated carbide for heat‑resistant alloys 60° triangular ISO indexable geometry Double‑sided chipbreaker for versatility 0.4 mm corner radius, cylindrical hole Increase throughput when machining heat‑resistant alloys The TNMG110404 AH8015 insert uses a PVD‑coated carbide substrate selected to balance wear resistance and edge stability. In practical terms, this means higher permissible cutting speeds and longer tool life compared with uncoated grades when processing demanding alloys. The coating reduces built‑up edge and thermal wear, so cycle times can be shortened without sacrificing component integrity. This paragraph focuses on the measurable production advantage: fewer tool changes and steadier output flux, which supports planning in batch and continuous turning operations. Predictable chip control and reliable surface finish A double‑sided chipbreaker combined with the triangular 60° geometry produces consistent chip formation under varied cutting conditions. The 0.4 mm corner radius offers improved edge strength for interrupted cuts and light roughing passes, contributing to reduced chatter and more reproducible surface quality. Selecting an appropriate chipbreaker and matching the insert grade to machining stability leads to fewer rejects and less rework. This section highlights how a well‑matched geometry converts into repeatable part quality rather than listing raw specifications. Seamless integration into ISO holder systems Compatibility with toolholders is governed by form, clearance angle, tolerance class, clamping and plate dimensions. The insert has a 4.76 mm plate thickness, an inscribed circle of 11 mm and a cylindrical hole, with a 0° relief specification; these measurable characteristics must match the chosen ISO holder and clamping kit. When correctly paired with a suitable external holder or boring bar, the system provides secure clamping, predictable run‑out and stable cutting conditions. Clear numeric values enable maintenance planners and purchasing teams to verify fit prior to installation. Application scope and material recommendations Designed primarily for turning, this insert is a first choice for the general machining of heat‑resistant alloys where a compromise between wear resistance and edge robustness is required. Typical uses include external profiling, light to medium roughing and finishing in steels and alloyed materials that exhibit elevated cutting temperatures. Where heavy interrupted cutting or extreme hardness is encountered, an alternative grade or geometry should be specified to preserve tool life. The practical outcome is reliable cycle planning and more consistent part tolerances. Contact Metav Werkzeuge for project‑specific advice and to secure genuine Tungaloy TNMG110404 AH8015 turning inserts for high‑temperature alloy machining. Technical data Article number: 6947362 Manufacturer item no.: 6947362 Manufacturer SKU: TUN6947362 SKU: 6947362-Tungaloy Core data Geometry: TNMG 110404 Inscribed circle: 11 mm Corner radius: 0.4 mm Plate thickness: 4.76 mm Relief/clearance angle: 0° Shape: triangular, 60° Hole: with cylindrical hole Special features Material: cemented carbide Coating: PVD Grade: AH8015 Chipbreaker: double‑sided Application: external and internal turning System: ISO‑standard indexable inserts Compatibility depends on form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert best suited for? The TNMG110404 AH8015 insert is optimised for heat‑resistant alloys and general alloy machining; the PVD coating improves wear resistance during elevated cutting temperatures. How is compatibility with toolholders determined? Compatibility is defined by the insert form, clearance angle, tolerance class, clamping method, inscribed circle (11 mm) and plate thickness (4.76 mm); these parameters must match the holder specification. Can this insert be used for internal turning or boring? Yes, the indexable plate is suitable for both external and internal turning operations when mounted in a compatible boring bar or holder designed for TNMG geometry. What advantages does the AH8015 grade provide? AH8015 delivers a balanced combination of wear resistance and cutting‑edge stability, making it a reliable choice for consistent productivity across varied alloy workpieces. How does the double‑sided chipbreaker affect performance? The double‑sided chipbreaker provides versatile chip control across different cutting conditions, improving surface finish and reducing the likelihood of chip‑related interruptions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com