TNMG 110404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) for superior surface quality and a 0.4 mm corner radius that supports fine finishing; the ISO TNMG geometry ensures straightforward compatibility with standard holders. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 110404 AT9530 ISO triangle turning insert for finishing — Tungaloy The TNMG110404 AT9530 is an ISO-standard triangle indexable insert designed for precision external and internal turning, optimised for finishing and light machining of steel. Coated cermet grade AT9530 for fine finishes ISO TNMG 110404 triangle geometry for holder compatibility 0.4 mm corner radius for improved surface quality Cylindrical hole and double-sided layout for secure clamping Precision surface quality for finishing operations The coated cermet grade AT9530 delivers a consistent, low-wear cutting edge that is particularly suited to finishing and light-turning tasks. When used in stable set-ups, this insert reduces edge chipping and promotes uniform wear, which translates into a more predictable component outcome and fewer insert changes. The triangular form and the 0.4 mm corner radius are selected to balance edge strength with the ability to achieve a fine surface finish, while the coated cermet composition improves thermal stability during short-duration cuts. For shops aiming to increase first-pass yield and lower secondary operations, this grade offers a clear efficiency advantage. Compatibility and robust clamping for reliable production The insert follows ISO specifications, so compatibility with standard external holders or boring bars is determined by the insert form, free clearance 0°, tolerance class, fastening method, size and thickness. The triangular plate design provides three indexable cutting edges per side, and the cylindrical hole with matching clamping kits ensures secure retention during interrupted cuts. Using ISO-matched toolholders simplifies tool inventory and speeds up changeovers, supporting continuous production. The result is a stable tool assembly that reduces vibration and helps maintain dimensional accuracy across batches. Material, grade and practical application guidance Made from cemented carbide substrate and finished with a specialised AT9530 coating, the insert is intended primarily for turning steel where excellent topography and even wear rates are priorities. The double-sided chipbreaker geometry facilitates predictable chip formation and evacuation in finishing cuts, reducing the risk of built-up edge and improving process reliability. For light machining and final passes, select feeds and depths compatible with the machining set-up and workpiece rigidity; the insert’s design supports achieving target tolerances with fewer reworks. The TNMG form and a 60° included angle also assist in producing stable cutting conditions along shoulder and profile transitions. Contact Metav Werkzeuge today for tailored cutting recommendations and to arrange supply of the Tungaloy TNMG110404 AT9530 indexable insert (SKU 6773708-Tungaloy); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773708 SKU: 6773708-Tungaloy Manufacturer SKU: TUN6773708 Model series: ISO-Drehwendeschneidplatten Name: TNMG110404 AT9530 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Included angle: 60° Free clearance: 0° Special features Coating / grade: AT9530 (coated cermet) Cutting material: Hartmetall (cemented carbide) Application: Drehen (turning) — finishing and light machining of steel Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole System: ISO indexable insert, compatible with ISO holders FAQ What materials is this insert best suited for? The TNMG110404 AT9530 insert is optimised for finishing and light machining of steel; the AT9530 cermet grade promotes excellent surface quality and uniform wear when turning steel components. Is the insert compatible with standard ISO holders? Compatibility is achieved through ISO conformity of the TNMG geometry; match holder form, tolerance class, clamping method, size and thickness to ensure proper seating and secure clamping. How many usable edges does the insert provide? The triangular TNMG form provides multiple indexable edges; the double-sided layout increases usable cutting edges per insert, improving cost-efficiency in production. What benefit does the 0.4 mm corner radius deliver? A 0.4 mm corner radius balances edge strength and surface finish, helping to reduce micro-chipping while enabling fine topography in finishing passes. Can this insert handle interrupted cuts? The cylindrical hole and robust clamping arrangement, combined with the cermet grade’s wear resistance, support use in interrupted finishing cuts provided the toolholder and set-up deliver adequate rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 GT9530 Wendeplatten - Tungaloy
The supplied product data contains a clear contradiction regarding the cutting material: one entry specifies a coated cermet (GT9530) while another entry indicates hardmetal. These are distinct substrate technologies with different cutting behaviour, recommended feeds and speeds, and typical applications; they therefore cannot both be assumed correct for a single item. Because of this inconsistency, a reliable, technically accurate product description and machining guidance cannot be generated from the current information. Please provide corrected technical data clarifying the actual cutting-material type (cermet or hardmetal) and any relevant substrate or coating details. If preferred, send the corrected specification or further technical files to our team and we will prepare a full description and application guidance. For assistance, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930.
TNMG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of precision finishing, low cutting forces and proven continuous-cut performance for smooth turning operations; order the inserts directly via Metav Werkzeuge or contact the consultants for application support. TNMG 110404 NS9530 TNMG – Turning insert, uncoated cermet, Tungaloy TNMG 110404 NS9530 Tungaloy-Wendeplatte for finishing turning operations on steels; triangular ISO insert with double-sided chipbreaker and cylindrical locating hole. Precision finishing for steel components Uncoated cermet grade NS9530 Double-sided chipbreaker for continuous cuts ISO triangular insert, 60° included angle Achieve consistent finishing with low cutting forces The uncoated cermet grade NS9530 is designed for finishing steel and delivers a sharp cutting edge with low cutting forces, which reduces vibration and helps attain a high surface finish on turned parts. Cermet is a ceramic–metal composite that combines wear resistance with edge stability; in practice this means more consistent part geometry during continuous cuts and improved dimensional reproducibility. The small corner radius 0.4 mm supports fine detail work and controlled chip formation for shallow cuts. Reliable ISO format and holder compatibility for shop-floor ease Supplied in the ISO format, the insert follows the widely used ISO designation and will fit holders that match the insert form, clearance angle, tolerance class, fastening style, size and thickness. The triangular form with a 60° included angle and a cylindrical locating hole provides secure clamping and repeatable seating in standard holders. Matching the insert to the correct holder geometry ensures stable cutting conditions; check holder specifications against the ISO code and plate thickness to guarantee secure fixation and optimal cutting performance. Practical selection and application guidance for efficient turning For external and internal turning where a fine surface is essential, select the NS9530 finishing grade together with the double-sided chipbreaker when operations involve continuous cuts and small depths of cut. The combination of the grade and the chipbreaker reduces built-up edge and promotes predictable swarf evacuation, which in turn supports longer productive runs. When integrating this insert into production, consider machining strategy (feed, depth and cutting speed) suited to finishing cuts and ensure the holder and clamping set are compatible for consistent results. For application-specific advice on using the Tungaloy NS9530 finishing insert and to source compatible holders or spare screws, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid supply. Technical data Article number: 6966222 SKU: 6966222-Tungaloy Manufacturer SKU: TUN6966222 Name: TNMG110404 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Plate thickness: 4.76 mm Included angle: 60° Size designation: 11 Special features Material: Carbide Cutting material: uncoated cermet (NS9530) Relief/clearance angle: 0° Hole: with cylindrical hole Form: triangular Chipbreaker: double-sided Application: Turning Typical use: finishing in steel ISO designation: TNMG110404 FAQ What materials are best suited to this insert? The TNMG110404 NS9530 Tungaloy insert is optimised for finishing steel; the uncoated cermet NS9530 provides the edge stability and surface quality expected for steel turning. Can the insert be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning operations when mounted in a compatible ISO holder and used with appropriate feeds and depths for finishing cuts. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker offers reversible use and helps control chip shape during continuous cuts, which supports reliable swarf evacuation and steadier machining with the NS9530 grade. What size and holder compatibility should be checked before use? Verify the holder matches the ISO form, plate size (designation 11), plate thickness 4.76 mm, clearance angle 0° and the 60° included angle to ensure correct seating and clamping of the TNMG110404 insert. What surface finish can be expected with this grade? When applied as a finishing insert with suitable cutting parameters, NS9530 produces a high surface finish and consistent part geometry thanks to its sharp edge and low cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet grade for consistent finishing performance, a 0.4 mm nose radius for accurate profile control and secure mounting via the cylindrical hole for repeatable results; order directly through Metav Werkzeuge or consult our specialists for technical advice. TNMG 110404 NS9530 — ISO turning insert for finishing, Tungaloy The TNMG110404 NS9530 is an ISO‑standard triangular turning insert engineered for finishing operations on steel, offering a sharp cutting edge, low cutting forces and optimised surface quality. Precision cermet for high surface finish Sharp cutting edge for low cutting forces Triangular ISO form TNMG, 60° lead angle Double‑sided chipbreaker, cylindrical hole for clamping Achieve superior surface finish with low cutting forces The uncoated cermet grade NS9530 is tailored for finishing on steel, combining a very sharp cutting edge with thermal stability to reduce built‑up edge and improve consistency. This material choice results in low cutting forces, which helps to preserve component geometry and reduces chatter during light cuts. For precision turning, the small 0.4 mm nose radius delivers tight profile control while still producing the fine surface textures required in finishing cycles. The result is a measurable improvement in first‑pass quality and reduced rework. Secure seating and ISO compatibility for reliable production Designed as an ISO‑conforming TNMG insert, the geometry ensures compatibility with standard TNMG holders; compatibility is governed by form, clearance angle, tolerance class, attachment method, size and thickness. The triangular form presents a 60° lead angle and a 0° clearance specification, while the insert thickness of 4.76 mm and size 11 give robust support under cutting loads. A cylindrical hole with secure clamping enables repeatable indexing of the double‑sided geometry, simplifying tool changes and stock control in series production. Optimised for continuous cuts and small depths to raise throughput This finishing grade is intended primarily for continuous cutting and small depths of cut, where surface integrity and dimensional control are critical. The double‑sided chipbreaker offers practical chip control while allowing two re‑uses of the cutting edge, improving cost efficiency per edge. In practice, selecting the correct chipbreaker and insert grade for the workpiece material and machine stability will extend edge life and maintain consistent part quality, supporting higher uptime and predictable cycle times on turning centres. For application advice or to confirm suitability of the Tungaloy TNMG 110404 NS9530 turning insert for a specific process, contact Metav Werkzeuge for detailed consultation and rapid availability at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6797242 SKU (manufacturer): TUN6797242 Size designation: 11 Thickness: 4.76 mm Nose radius: 0.4 mm Lead/insert angle: 60° Clearance angle: 0° Hole style: cylindrical Chipbreaker: double-sided Facts Model series: ISO turning indexable inserts Application: Turning (external and internal) Grade: NS9530 cermet (uncoated) Insert form: triangular (TNMG) Mounting: with hole for secure clamping Special features ISO TNMG form for broad holder compatibility Cylindrical hole for repeatable clamping Optimised for continuous cuts and small depths of cut High surface finish with low cutting forces Double-sided, indexable geometry for cost efficiency FAQ What materials is this insert intended for? The TNMG 110404 NS9530 is a finishing grade developed for steel; the NS9530 cermet offers a sharp edge and thermal stability suited to typical steel turning operations. Is this insert compatible with standard TNMG holders? Yes; the insert follows ISO TNMG geometry, and compatibility depends on holder form, clearance angle, tolerance class, attachment and size—ensure the holder matches the TNMG110404 dimensions. How is the insert mounted and indexed? The insert features a cylindrical hole for secure mounting and a double‑sided design that allows indexing to the second cutting edge, supporting fast and repeatable tool changes. Which cutting conditions best suit this grade? This uncoated cermet grade is optimised for continuous cuts and small depths of cut in finishing applications; match chipbreaker and feed rates to workpiece stability to maximise surface quality and edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high surface quality, low cutting forces and ISO compatibility for consistent finishing results; order the insert via Metav Werkzeuge or request application guidance from our consultants. TNMG110404 NS9530 turning insert — finishing grade, uncoated cermet by Tungaloy TNMG110404 NS9530 is an ISO‑standard triangular turning insert designed for finishing operations on steel; compatibility with holders is defined by form, clearance angle, tolerance class, mounting and size. TNMG format, ISO 110404 for secure compatibility NS9530 uncoated cermet for high surface finish Sharp cutting edge for low cutting forces Double-sided chipbreaker; triangular 60° geometry Precise finishing for steel components with a sharp cermet edge The uncoated cermet grade NS9530 is formulated for finishing cuts on steel where a sharp cutting edge and low cutting forces are required. This results in improved surface quality with minimal burr formation and less need for secondary operations. For continuous cutting and small depths of cut the material chemistry and edge geometry reduce built-up edge and support consistent part tolerances. The combination of a fine microstructure and a specifically honed edge enables reliable finishing at moderate speeds while maintaining component integrity. System compatibility and straightforward integration into ISO setups The insert follows the ISO 110404 designation and the triangular TNMG format, which ensures mechanical compatibility with a broad range of standard external holders and boring bars. The 60° included angle and the 0° clearance specification match typical holder geometries; this simplifies tooling selection and shortens setup time. Because the seat, fastening method and tolerance class determine fit, the insert integrates predictably into established tool stations, enabling rapid changeovers and reproducible assembly in serial production environments. Controlled chip formation and stable cutting behaviour Equipped with a double-sided chipbreaker, the cutting geometry promotes controlled chip segmentation during finishing cuts, lowering the risk of entanglement and improving evacuation in confined workspaces. The relatively small 0.4 mm corner radius supports fine edge strength while preserving a delicate profile for high‑quality finishes. Together, these design choices reduce cutting forces and thermal load on the cutting edge, which contributes to steady machining and fewer rejects in precision turning operations. Application guidance and choosing the right conditions Intended primarily for turning of steel in finishing applications, the insert performs best with light to moderate feeds and small depths of cut; continuous cuts favour its sharp edge and surface-generation properties. For customers seeking a balance between surface finish and process reliability, selecting the NS9530 grade and matching the chipbreaker to material stability will yield the best outcomes. If process parameters require adaptation, consult machining data for comparable cermet finishing grades to determine optimal speeds and feeds for specific steels. For precision finishing of steel components with Tungaloy quality, contact Metav Werkzeuge for application advice or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930, and benefit from targeted tooling support. Technical Data Manufacturer article number: 6710206 Manufacturer SKU: TUN6710206 SKU: 6710206-Tungaloy Model series: ISO‑turning inserts Material: carbide Numerical data Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 11 mm Included angle: 60° Clearance (relief) angle: 0° Design & features ISO designation: TNMG110404 Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Shape: triangular Mounting: with cylindrical hole Recommended application: turning (finishing) Typical system components: external holder or boring bar, clamp/pad and replacement screw FAQ What materials is this insert suited for? This insert is optimised for finishing cuts in steel; the NS9530 uncoated cermet grade offers a sharp edge and low cutting forces suited to continuous machining of steel. How does the ISO designation affect holder selection? ISO designation TNMG110404 indicates geometry, size and tolerance class; compatible external holders and boring bars with the corresponding seat and fastening will accept the insert without modification. Can this insert be used for roughing operations? The NS9530 grade is a finishing sort designed for small depths of cut and low forces; it is not intended as a primary roughing solution where larger depths and interrupted cuts are required. Is the chipbreaker suitable for automated machining cells? The double‑sided chipbreaker promotes consistent chip control and is advantageous in automated environments, where reliable evacuation and repeatable results are essential. What is the manufacturer article number and brand? The insert is supplied by Tungaloy with manufacturer article number 6710206 and SKU 6710206-Tungaloy, listed as an ISO‑standard TNMG insert in grade NS9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
The CVD‑coated T6215 grade combines high wear resistance with stable chip formation for productive stainless steel turning; the ISO TNMG110404 triangular geometry and double‑sided chipbreaker ensure reliable indexing and long tool life. Order the insert directly via Metav Werkzeuge or consult the team for matching holders and clamping sets. TNMG110404 T6215 TNMG turning insert — CVD‑coated carbide, 60° triangle (Tungaloy) The TNMG110404 T6215 is an ISO‑standard triangular turning insert engineered for stable to lightly interrupted turning operations, providing wear resistance and consistent surface finish in stainless steel machining. CVD‑coated carbide grade T6215 Designed for turning stainless steels ISO TNMG110404 triangular insert, 60° included angle Double‑sided chipbreaker with cylindrical hole Consistent wear resistance for longer productive runs The CVD‑coating on this carbide grade delivers a hard, wear‑resistant surface that reduces flank wear under continuous cutting, enabling longer runtimes between indexings. The T6215 formulation is optimised for machining stainless steels, where adhesive wear and built‑up edge can shorten tool life; the coating helps stabilise the cutting edge and maintain cutting geometry. As a result, process stability is improved and component quality becomes more predictable, supporting higher machine utilisation and fewer interruptions for insert changes. Precise geometry for reliable seating and repeatability The ISO TNMG110404 geometry with a 60° included angle and corner radius 0.4 mm gives a balanced contact area for general turning and light profiling. The 0° clearance angle and thickness 4.76 mm ensure stable clamping in standard TNMG toolholders, while the cylindrical hole supports secure fastening and repeatable positioning. This precision in form and tolerance reduces vibration and contributes to consistent dimensional results across batches, which is critical in production environments demanding repeatability. Versatile chip control and application range Equipped with a double‑sided chipbreaker, the insert offers two usable cutting positions per side, increasing the available cutting edges and lowering running costs. The chipbreaker design assists in breaking and evacuating swarf when turning bars, shafts or complex profiles, particularly in tougher stainless alloys. Selection of the correct chipbreaker and grade combination allows tailoring of the process to material grade and rigidity of the set‑up, improving surface finish and minimising secondary operations. Economical indexing and easy integration into tool systems As a triangular, double‑sided insert, the component provides multiple effective cutting edges, which reduces tooling consumption per part produced and improves cost efficiency. Compatibility with ISO‑standard TNMG clamping systems simplifies inventory and changeover procedures: insert form, size, thickness and hole style determine holder fit, making it straightforward to match the insert to existing external holders or boring bars. The combination of CVD coating, T6215 grade and robust geometry supports both small batch flexibility and continuous production runs. For technical matching, availability and to order the Tungaloy TNMG110404 T6215 insert, contact Metav Werkzeuge for expert advice and fast supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903043 Manufacturer SKU: TUN6903043 SKU: 6903043-Tungaloy Designation: TNMG110404 T6215 Tungaloy insert Material: carbide Core data Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle/size: 11 mm Included angle: 60° Clearance angle: 0° Hole style: with cylindrical hole Special features Coating: CVD Grade: T6215 Chipbreaker: double‑sided Shape: triangular (TNMG) Model series: ISO turning inserts Application: turning FAQ Is this insert suitable for interrupted cuts? The TNMG110404 T6215 insert from Tungaloy is specified for stable to lightly interrupted conditions; occasional interruptions are acceptable but heavy shock loading should be avoided to preserve edge life. Which materials is the T6215 grade intended for? The T6215 CVD‑coated carbide grade is optimised for machining stainless steels and similar alloys where adhesive wear and work hardening are concerns. How many cutting edges are available per insert? As a triangular, double‑sided insert the TNMG110404 provides multiple usable edges; each corner can be indexed and both sides are usable, maximising effective edge count. How to ensure compatibility with existing holders? Compatibility is determined by insert form, size, thickness, hole style and tolerance class; the TNMG110404 fits ISO TNMG holders with matching 60° seating and cylindrical hole clamping. What benefits does the CVD coating bring? The CVD coating on the T6215 grade increases wear resistance and thermal stability at the cutting edge, improving surface finish and extending time between indexings for this insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade and precise geometry to maintain stable chip formation and consistent tool life in stainless‑steel turning. Order directly via Metav Werkzeuge or consult the technical team for compatibility and delivery. TNMG 110404 T6215 – Tungaloy turning indexable insert, CVD‑coated carbide, R0.4 TNMG 110404 T6215 is an ISO‑standard indexable insert designed for turning applications, optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions ISO‑standard triangle insert, 60° cutting angle CVD‑coated carbide grade T6215 for stainless steel Double-sided chipbreaker for consistent chip control R0.4 corner radius for precise finishing High‑temperature coating for improved tool life The CVD‑coating on this insert provides a wear‑resistant contact layer that reduces flank and crater wear during continuous turning of stainless steel. The carbide substrate combined with the T6215 grade is formulated for stable cutting conditions and offers an improved balance between toughness and hardness; this leads to prolonged service intervals and fewer index changes. For production environments where surface finish and repeatability matter, the coated substrate helps to maintain dimensional accuracy over longer tool life. Geometry engineered for reliable chip control A triangular plate with a 60° cutting angle and an R0.4 corner radius gives predictable engagement and an even contact distribution at the cutting edge. The double‑sided chipbreaker supports controlled chip formation across a range of feeds, reducing the risk of long, stringy chips and minimising interruptions to the machining process. This geometry is particularly beneficial when consistent chip evacuation is required to protect the workpiece surface and to reduce cycle‑time variability. Clear compatibility and straightforward integration Compatibility with holders is determined by plate form, clearance angle, tolerance class, clamping style, size and thickness — all of which are standardised for this insert. The TNMG form and the presence of a cylindrical locating hole permit secure clamping in a matching ISO turning holder or boring bar. When integrating into an existing tooling system, attention to the insert thickness (4.76 mm) and inscribed circle (11 mm) ensures correct seat fit and clamp engagement for safe, repeatable operation. Process benefits: efficiency and consistent results Selecting the T6215 grade means prioritising stable chip formation and wear resistance in rostfreier Stahl turning. The combined effect of the CVD coating and the optimized chipbreaker reduces tool‑change frequency and supports higher process uptime. In practice, this translates into fewer interruptions, less scrap risk and a more predictable production flow — advantages that contribute directly to shop‑floor efficiency and lower unit costs over time. For availability, technical compatibility checks or to request tailored recommendations for Tungaloy turning tools, please contact Metav Werkzeuge – technical advisors are available by email or phone to support machining integration and stock inquiries. Technical Data Article number: 6966214 Manufacturer SKU: TUN6966214 Brand: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle (size): 11 mm Cutting angle: 60° Clearance angle: 0° Shape: triangular Special features CVD‑coated carbide (grade T6215) Double‑sided chipbreaker Cylindrical locating hole ISO‑standard turning insert Application: turning Suitable for rostfreier Stahl Material: carbide FAQ What materials is this insert designed for? The TNMG110404 T6215 indexable insert from Tungaloy is formulated primarily for rostfreier Stahl (stainless steel) turning under stable to lightly interrupted conditions and is supported by its CVD‑coated carbide construction. How does the chipbreaker affect machining? The double‑sided chipbreaker on the TNMG110404 T6215 improves chip control across common feed ranges, producing short, manageable chips and reducing the likelihood of chip‑related interruptions. What holder characteristics are required for correct mounting? Correct mounting requires a matching ISO holder that accommodates the TNMG form, 11 mm inscribed circle and 4.76 mm thickness; the cylindrical hole allows positive location and secure clamping in compatible tooling systems. Is this insert suitable for interrupted cuts? The T6215 grade and robust carbide substrate make the TNMG110404 T6215 appropriate for stable to lightly interrupted cuts; heavy interruptions may require a more shock‑resistant grade or different geometry. How many cutting edges are available per insert? As a triangular, double‑sided insert, the TNMG110404 T6215 provides multiple indexable edges per plate; exact count depends on orientation and whether both sides are usable in the chosen clamping system. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T6215 grade for extended wear resistance and the 0.4 mm corner radius for reliable profile control; the ISO TNMG110404 form enables straightforward compatibility with standard holders. Order the TNMG110404 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110404 T6215 turning insert (ISO TNMG, for turning) by Tungaloy The TNMG110404 T6215 is an ISO triangular turning insert designed for stable machining of stainless steels in both external and internal turning operations. CVD-coated carbide for wear resistance Optimised for stainless steel turning Triangular 60° geometry with 0.4 mm nose radius Double-sided chipbreaker with cylindrical hole Reliable performance for stainless steel turning This insert combines a CVD-coated surface with a wear-resistant carbide substrate, which reduces flank wear and extends tool life under continuous and lightly interrupted cuts. The T6215 grade is formulated for turning stainless steel, offering consistent edge stability and predictable wear behaviour. Because the insert is ISO‑standardised, compatibility with the toolholder is assured when form, clearance angle, tolerance class, attachment method, size and thickness are matched, simplifying tool selection and inventory management. Precision geometry that supports productivity The triangular shape with a 60° included angle and a 0.4 mm corner radius delivers a balance between strength and detail, enabling good surface finish while maintaining edge robustness. The 4.76 mm insert thickness and double-sided chipbreaker allow indexing of multiple cutting edges, improving economy per edge and reducing changeover time. The insert’s cylindrical hole supports secure clamping in standard TNMG holders and promotes repeatable positioning, which is especially valuable in production environments seeking high first-pass yield. Practical application and process guidance Intended for general turning tasks, the insert performs well in external and internal operations; choose the chipbreaker and grade according to workpiece material, cut depth and machine stability. For best results when turning stainless steels, favour moderate cutting speeds and positive feed to control built-up edge and heat generation; the T6215 coating aids in chip flow and surface integrity. If stability is limited or interruptions are frequent, select a geometry and holder with greater rigidity to maintain consistent performance and extend edge life. For assured results with Tungaloy’s T6215 grade in stainless steel turning, consult Metav Werkzeuge for application-specific recommendations or to confirm holder compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944821 Manufacturer SKU: TUN6944821 SKU: 6944821-Tungaloy Grade: T6215 Material: Carbide ISO designation: TNMG110404 Shape: Triangular With hole: with hole (cylindrical) Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Special features CVD-coated grade T6215 Double-sided chipbreaker Compatible with ISO holders for turning Application: turning of stainless steels Suitable for stable to light interrupted cuts FAQ Which materials is this insert best suited for? The TNMG110404 T6215 insert is optimised for machining stainless steel, providing wear resistance and process stability for common stainless grades. How does the T6215 grade improve tool life? The T6215 CVD coating reduces abrasive wear and improves thermal resistance, so the insert maintains a sharper cutting edge under sustained cutting conditions. What are the key geometric benefits of the insert? The triangular 60° geometry combined with a 0.4 mm corner radius and 4.76 mm thickness offers a robust edge for general turning while enabling multiple indexable cutting edges. Is the insert suitable for interrupted cuts? The insert is intended for stable to light interrupted conditions; for heavy interruptions, a more robust geometry or a stiffer holder is recommended with the TNMG110404 insert. How many cutting edges can be used before replacement? Being double-sided and indexable, the insert provides multiple usable cutting edges; the exact count depends on the chosen indexing strategy and wear limits for the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide for improved wear resistance, a double‑sided chipbreaker for reliable chip control and an ISO‑standard form that simplifies holder selection — order the insert directly via Metav Werkzeuge or consult our team for application advice. TNMG 110404 T6215 indexable turning insert by Tungaloy — CVD‑coated carbide, 0° clearance TNMG 110404 T6215 is an ISO‑standard indexable insert designed for turning applications, optimised for stainless steel under stable to lightly interrupted cutting conditions. CVD-coated carbide for improved wear resistance Double-sided chipbreaker for reliable chip control Triangle 11 mm size with 0.4 mm corner radius Consistent, wear‑resistant cutting for turning stainless steel The CVD‑coated carbide grade T6215 delivers wear resistance that supports consistent tool life when machining stainless steel in stable setups. The coating reduces abrasive wear and thermal softening at the cutting edge, which in turn maintains dimensional accuracy over longer production runs. This makes the insert particularly suitable for medium to high cutting speeds where surface finish and repeatability are priorities. For best results, pair the insert with a rigid holder and select a chipbreaker that matches the workpiece material and the stability of the setup. Geometry engineered for repeatable accuracy and secure clamping A triangular plate with an 11 mm inscribed circle, a 0.4 mm corner radius and a 60° included angle provides reliable seating and predictable corner strength. The 0° clearance geometry offers neutral engagement that helps resist side loading in many turning operations, especially when external forces fluctuate. The insert’s cylindrical hole supports positive clamping in ISO‑type holders and ensures consistent location and repeatability when indexing. These geometric details translate into stable cutting performance and reduced setup variability in series production. Economy through double‑sided use and straightforward replacement The double‑sided chipbreaker design allows multiple indexing positions, extending the usable life of each insert and lowering per‑edge costs. When one edge becomes worn, the plate can be rotated to present a fresh cutting edge, which reduces tool change frequency and machine downtime. Combined with the robust carbide substrate and coating, this leads to improved process economy without compromising surface quality. For operations where cost per part and uptime are critical, the ability to index inserts several times is a measurable advantage. ISO compliance and selection guidance for reliable integration Delivered as part of an ISO turning insert system, the plate is compatible with holders when form, relief angle, tolerance class, fixing method, size and thickness match. Selection should consider the workpiece material, the desired surface finish and the stability of machine setup: choose a suitable chipbreaker and the T6215 grade for rostfrei (stainless) applications where a balance of wear resistance and edge integrity is needed. If process data or cutting parameters are required for specific alloys or interrupted cuts, consult technical advisors to align tool life and productivity goals. Contact Metav Werkzeuge for tailored cutting data, availability and rapid supply of Tungaloy TNMG 110404 inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966241 Manufacturer SKU: TUN6966241 SKU: 6966241-Tungaloy Model series: ISO turning indexable inserts Facts Plate size (inscribed circle): 11 mm Plate thickness: 4.76 mm Included angle: 60° Corner radius: 0.4 mm Relief/clearance angle: 0° Special features Material: carbide Coating: CVD Grade: T6215 Plate form: triangular Hole: cylindrical, with hole Chipbreaker: double‑sided Intended application: turning, suitable for stainless steel under stable to light interrupted conditions ISO standardised insert — compatibility depends on holder form and clamping FAQ What materials is this insert suitable for? The TNMG 110404 in grade T6215 is a CVD‑coated carbide insert optimised for machining stainless steel in stable to lightly interrupted cutting conditions; other materials may be possible with altered parameters. Which holder features must match the insert? Compatibility requires matching the holder to the insert’s form, relief angle, tolerance class, fixing method, size and thickness; the insert follows ISO turning conventions for secure clamping. Can the plate be indexed to present fresh edges? Yes, the double‑sided chipbreaker allows indexing to a fresh edge, extending the usable life of the plate and improving cost efficiency between changes. What are the key geometric values to note before setup? Key values include the 11 mm inscribed circle, 4.76 mm thickness, 60° included angle and 0.4 mm corner radius — these determine seat fit, corner strength and surface finish tendencies. Is the T6215 coating suitable for interrupted cuts? The T6215 CVD coating is designed for wear resistance under stable to lightly interrupted conditions; for heavily interrupted cutting, a different grade or cutting strategy may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a compact 60° triangular geometry provides reliable performance when turning stainless steels under stable to lightly interrupted conditions; order the matching insert directly via Metav Werkzeuge or ask the technical advisors for a tailored recommendation. TNMG 110404 T6215 turning insert (ISO) by Tungaloy A TNMG110404 T6215 indexable insert for external and internal turning, optimised for rostfreiem Stahl machining under stable to slightly interrupted cutting conditions CVD-coated carbide T6215 for stainless steel 60° triangular shape for versatile turning 0° clearance angle ensures stable contact Double-sided chipbreaker, 0.4 mm corner radius Greater process reliability through CVD-coated carbide performance The CVD-coated carbide grade T6215 combines wear resistance with consistent edge life, making it suitable for demanding stainless steel operations. The coating reduces abrasive wear and prolongs tool life, which translates into fewer insert changes and less machine downtime. With a corner radius of 0.4 mm, the insert supports a balance between robust edge strength and acceptable surface finish, enabling higher material removal rates without sacrificing component integrity. This results in measurable productivity gains on series and batch production runs. Simple compatibility and secure clamping for predictable results The insert follows ISO dimensions and a 60° triangular geometry, so compatibility with holders depends on form, clearance, tolerance class, clamping method, size and thickness. The TNMG110404 features a cylindrical locating hole and a standard thickness of 4.76 mm, which simplifies selection of the correct external holder or boring bar. Specifying the corresponding holder geometry ensures reliable seating and repeatable positioning, reducing vibration and improving dimensional accuracy during turning. Practical benefits: efficient chip control and machining stability Equipped with a double-sided chipbreaker, the insert assists in generating short, controlled chips when machining stainless steels, lowering the risk of built-up edge and improving surface quality. The 0° clearance angle provides stable contact and even load distribution across the cutting edge, which is particularly beneficial in steady-state turning and light interruptions. Together these features support consistent cycle times and reduce rework, making the insert an economic choice for production environments seeking predictable, high-quality results. Contact Metav Werkzeuge to specify the appropriate Tungaloy TNMG110404 T6215 insert for the intended turning operation or request a machining recommendation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944871 Manufacturer SKU: TUN6944871 SKU: 6944871-Tungaloy Manufacturer: Tungaloy Facts ISO designation: TNMG110404 Geometry: 60° triangular Corner radius: 0.4 mm Thickness: 4.76 mm Size: 11 mm Clearance angle: 0° Special features Grade/coating: T6215, CVD-coated carbide Application: Turning; suited for stainless steels under stable to lightly interrupted conditions Chipbreaker: Double-sided Hole style: Cylindrical locating hole System: ISO indexable insert; requires compatible holder and clamping kit FAQ What materials is this insert suited for? The Tungaloy TNMG110404 T6215 insert is designed primarily for stainless steels; the CVD-coated carbide grade provides wear resistance for stable to lightly interrupted turning operations. How many usable cutting edges does the insert provide? With a triangular, double-sided design, the insert yields six usable cutting edges per indexable piece, allowing economical edge utilisation before replacement. What determines compatibility with a holder or boring bar? Compatibility depends on the holder geometry and the insert’s form, clearance angle, tolerance class, clamping method, size and thickness; check these parameters when selecting the matching external holder. Can the insert handle interrupted cuts? The grade T6215 and the 0.4 mm corner radius make the insert suitable for stable and light interruptions; heavy interrupted cuts may require a different geometry or grade. Is this insert compliant with ISO standards? Yes, the insert follows ISO dimensions and designation (TNMG110404), enabling straightforward integration into ISO-compatible tooling systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T6215 for extended edge life and the double-sided chipbreaker for economical indexing; ideal for turning stainless steel in stable or slightly interrupted conditions. Order directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG 110404 T6215 — Indexable Turning Insert (Triangle, 60°, Tungaloy) TNMG 110404 T6215 is an ISO‑standard indexable insert for turning, engineered for robust performance in stainless steel and similar challenging materials CVD-coated carbide grade T6215 Double-sided chipbreaker for economy 0.4 mm corner radius for robust edges ISO TNMG110404 triangular insert Longer tool life through optimised coating and grade The combination of a CVD-coated carbide substrate and the T6215 grade provides improved wear resistance during continuous turning of stainless steel. The coating forms a hard, thermally stable surface that slows flank and crater wear at elevated cutting temperatures, so the insert maintains cutting geometry for longer. This results in fewer indexings and more consistent component quality, particularly where stable machining conditions prevail. For less experienced users, CVD signifies a vapour‑deposited layer designed to protect the substrate while preserving a sharp cutting edge. Reliable chip control and predictable tool indexing A double-sided chipbreaker matched to the insert geometry helps to control swarf formation in many turning operations. The triangular shape with a 0.4 mm corner radius gives a balance between edge strength and profile detail, while the 0° clearance geometry suits many standard holders. The insert’s central cylindrical hole and standard form ensure secure clamping and simple rotation for cost‑effective indexation: when one edge dulls slightly, flip to a fresh cutting edge and resume production without complex regrinding procedures. ISO conformity and straightforward holder compatibility Built to the ISO series for turning inserts, this item features an 11 mm size, 4.76 mm thickness and a 60° included angle, which simplifies selection of compatible external or internal turning holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO system reduces uncertainty by standardising these parameters. When choosing an insert and holder combination, match the chipbreaker and grade to the workpiece material and operation stability to achieve the best surface finish and tool life. For high‑performance turning with Tungaloy’s T6215 grade, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944836 SKU: 6944836-Tungaloy Manufacturer SKU: TUN6944836 Designation: TNMG110404 T6215 Brand: Tungaloy Dimensions & core data Size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 60° Materials & special features Material: carbide Coating: CVD Grade: T6215 Shape: triangular Hole: cylindrical Chipbreaker: double-sided Application: turning Series: ISO turning indexable inserts Suitable for: stainless steel FAQ What materials is this insert suitable for? This TNMG110404 T6215 insert from Tungaloy is designed primarily for stainless steel machining under stable to lightly interrupted cutting conditions. How does the T6215 grade improve performance? The T6215 CVD coating enhances wear resistance and thermal stability, which extends the effective life of the insert and supports consistent surface finish during turning. Can the insert be indexed to use multiple cutting edges? Yes, the triangular TNMG form with a central cylindrical hole and double‑sided chipbreaker allows economical indexing to fresh edges without regrinding. Which holder features must match this insert? Compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness; the ISO TNMG110404 geometry simplifies selection of a suitable holder. Is this insert suitable for interrupted cuts? The insert performs best under stable to slightly interrupted conditions; for heavy interruptions, a different geometry or a more robust grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control, and ISO compatibility for uninterrupted production; order through Metav Werkzeuge or consult our specialists for holder compatibility and application advice. TNMG 110404 T9215 indexable turning insert — triangular ISO insert for general turning TNMG 110404 T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning applications, offering CVD‑coated carbide performance for productive machining of medium steels. CVD‑coated carbide grade T9215 for steel ISO TNMG 110404 triangular insert, 60° angle 0.4 mm corner radius for balanced finish and strength Double‑sided chipbreaker, cylindrical hole mounting Extended tool life and consistent productivity The CVD‑coated carbide composition of this insert combines a wear‑resistant surface with a robust substrate to extend tool life during continuous and lightly interrupted cuts. The T9215 grade is tuned for medium‑hard steels, delivering a compromise between high wear resistance and fracture toughness that supports higher cutting speeds and longer intervals between indexings. For production environments this means fewer tool changes and more consistent cycle times, which contributes directly to process stability and throughput. Reliable chip control for safer, cleaner machining A double‑sided chipbreaker is integrated to produce predictable chip forms across a range of cutting parameters, improving evacuation in both external and internal turning. Controlled chip formation reduces risk of rework and machine downtime while helping to maintain surface integrity. The relatively modest 0.4 mm corner radius balances edge strength with surface finish, enabling reliable load distribution at the cutting edge and a stable cutting action when paired with an appropriate insert holder. Straightforward integration into ISO tool systems The insert is built to ISO TNMG 110404 dimensions, with a 60° insert angle and a cylindrical hole for positive mounting. Compatibility with a given holder is determined by insert form, relief angle, tolerance class, fastening type, overall size and thickness; acknowledging these parameters ensures straightforward interchangeability within standard toolholders. The plate thickness of 4.76 mm and the 11 mm inscribed circle size support a wide range of common ISO holders, easing toolstock standardisation on the shop floor. Practical selection advice for everyday turning Select the T9215 grade and the double‑sided chipbreaker when machining medium steels with predominantly continuous cuts or light interruptions to combine productivity with process reliability. For interrupted or unstable setups, consider holders that improve rigidity or alternative grades optimised for toughness. The insert’s design supports both roughing and semi‑finishing duties when cutting parameters are matched to material and machine capability; choosing the correct tolerance class and clamping method is essential to exploit the insert’s full potential. For tailored advice on selecting TNMG 110404 T9215 for specific turning operations or to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge’s consultants are available to support tool selection and supply. Technical data Article number: 6772325 Manufacturer SKU: TUN6772325 Model series: ISO‑turning indexable inserts Material: carbide (CVD‑coated) Core technical data Corner radius: 0.4 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Insert angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Grade: T9215 Schneidstofftyp: CVD‑coated carbide Insert form: triangular (TNMG110404) Chipbreaker: double‑sided Typical application: turning (external and internal) Compatibility depends on form, relief, tolerance, fastening, size and thickness FAQ Which materials is this insert best suited for? This insert in T9215 grade is recommended primarily for medium steels; the CVD‑coated carbide composition balances wear resistance and toughness for productive steel turning. How does the chipbreaker influence machining results? The double‑sided chipbreaker on the TNMG 110404 promotes consistent chip formation, improving evacuation and surface quality during both external and internal turning. What determines compatibility with a toolholder? Compatibility for the TNMG 110404 is defined by insert form, relief angle, tolerance class, fastening method, inscribed circle size and plate thickness — all must match the holder specification. Can this insert handle interrupted cuts? T9215 is suited to continuous and lightly interrupted cutting; for heavy interruptions, select a grade or geometry optimised for increased toughness and use a rigid clamping arrangement. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, offering robust performance for general turning without sacrificing acceptable finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T9215 grade that combines wear resistance with breakage safety and a 0.4 mm corner radius for versatile medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. TNMG 110404 T9215 ISO turning insert for turning, Tungaloy A TNMG110404 T9215 ISO indexable turning insert designed for external and internal turning of medium steels, offering robust CVD-coated carbide performance and a double-sided chipbreaker for consistent chip control. ISO-standard triangular insert CVD-coated carbide grade T9215 0.4 mm corner radius, 60° included angle Suitable for medium steel, continuous cuts High productivity for medium-steel turning The insert is manufactured in CVD-coated carbide and specified as grade T9215, which is tailored for the demands of medium steel machining. That composition provides a balance of wear resistance and fracture toughness, allowing higher material removal rates under stable conditions. The triangular geometry with a 60° included angle and a 0.4 mm corner radius supports versatile turning tasks, so process engineers can focus on throughput and repeatability rather than frequent tool changes. Compatibility with ISO-indexed holders enables quick indexability and predictable cutting performance. Consistent chip control and extended tool life Equipped with a double-sided chipbreaker, the insert promotes reliable chip formation across a range of cutting depths and feeds, lowering the risk of entanglement and improving surface finish. The CVD coating increases resistance to abrasive wear and heat, helping to preserve the cutting edge in continuous and lightly interrupted cuts. As a result, component shops benefit from longer intervals between indexing or insert replacement, which supports smoother production schedules and reduced tool-related downtime. Straightforward integration into ISO turning systems Integration into existing tool systems is determined by insert geometry, relief angle (0°), tolerance class, fixing method, size 11 and thickness 4.76 mm. The insert features a cylindrical mounting hole and is supplied with a geometry that matches standard ISO turning holders, simplifying selection of the correct clamp and screw set. A complete working system typically comprises the insert, suitable external holder or boring bar, shim/underplate and clamping screw, allowing rapid replacement and consistent positioning in automated or manual setups. Practical guidance for stable results For optimal results, select a holder and clamping arrangement that minimise overhang and vibration; the right machine rigidity improves the T9215 grade performance. Choose a chipbreaker and feed combination appropriate to the workpiece stability: the insert excels in continuous to slightly interrupted cuts on medium steels. When tool life or surface finish is critical, prioritise stable fixtures and conservative depths of cut until process windows are validated. This approach delivers predictable component quality and makes the most of the insert's balance between productivity and edge security. For process optimisation with Tungaloy’s T9215 inserts, contact Metav Werkzeuge for tailored application advice and stock availability at Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6772308 Manufacturer SKU: TUN6772308 SKU: 6772308-Tungaloy Brand: Tungaloy Designation: TNMG110404 Facts Size: 11 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Mounting hole: with hole (cylindrical) Special features CVD-coated carbide Grade T9215 Triangular geometry Double-sided chipbreaker ISO indexable turning insert Application: turning (external and internal) FAQ What materials is this insert best suited for? The TNMG110404 T9215 insert is optimised for medium steels, where the T9215 grade provides a favourable combination of wear resistance and toughness for productive turning. Is the insert compatible with standard ISO turning holders? Yes. The insert follows ISO indexable insert dimensions and mounts via a cylindrical hole; compatibility is governed by form, relief angle, tolerance class, fixing, size and thickness. How many cutting edges are available per insert? The triangular TNMG110404 design provides multiple usable edges through indexing; the double-sided chipbreaker supports repeated indexing for extended service life. Does the coating affect cutting temperature resistance? The CVD coating enhances abrasive wear resistance and contributes to improved performance under elevated temperatures compared with uncoated grades. Which applications should avoid this grade? While ideal for medium-steel turning in continuous to slightly interrupted cuts, more specialised grades may be required for heavy interrupted machining or extremely hard materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide T9215 and a precise 0.4 mm corner radius to achieve consistent surface finish and high productivity in medium steel turning; compatibility with ISO holders ensures stable clamping and fewer tool changes. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. TNMG 110404 T9215 triangular turning insert (ISO) by Tungaloy — CVD-coated carbide, 0.4 mm radius The TNMG110404 T9215 is an ISO triangular turning insert engineered for medium steel machining, combining high wear resistance with fracture toughness for continuous to slightly interrupted cuts ISO triangular insert TNMG 110404 CVD-coated carbide grade T9215 0.4 mm corner radius for fine profiling Double-sided chipbreaker, cylindrical hole Optimised performance for medium-steel turning The combination of CVD-coated carbide and the T9215 grade prioritises sustained cutting performance under industrial conditions. The chemical vapour deposition layer improves wear resistance and reduces built-up edge formation, while the cemented carbide substrate maintains fracture toughness during intermittent engagements. This geometry and material pairing is aimed at stable metal removal rates, longer in-process life and fewer insert changes, which together enhance overall shopfloor throughput and lower operational interruptions. Secure clamping and proven ISO compatibility for reliable machining Compatibility with holders is determined by form, 0° clearance angle, tolerance class, fastening, size and thickness; the ISO designation ensures interchangeability across standard toolholders. The triangular shape with an 11 mm inscribed circle and a cylindrical hole supports secure clamping and repeatable seating. A double-sided chipbreaker aids chip control on both cutting edges, and the standard system setup — insert, matched external holder or boring bar, shim/clamping kit and replacement screws — provides a predictable assembly that helps reduce setup time and improves process stability. Productivity gains and controlled surface finish for series production The modest 0.4 mm corner radius and the insert’s 60° geometry support fine profiling and consistent surface quality on medium steels without sacrificing metal removal rates. Designed for continuous to slightly interrupted cuts, the insert contributes to predictable tool-life cycles and consistent dimensional results, making batch production more economical. Operators benefit from improved chip control and less rework; maintenance routines become more efficient as fewer breakdowns and insert swaps are required, translating into measurable gains in machining throughput. For high-productivity medium steel turning with Tungaloy’s CVD-coated T9215 grade, contact Metav Werkzeuge for tailored advice and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966239 Manufacturer SKU: TUN6966239 SKU: 6966239-Tungaloy Label: TNMG110404 T9215 Tungaloy insert Facts Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size (inscribed circle): 11 mm Special features Material: cemented carbide Coating: CVD Chipbreaker: double-sided Plate form: triangular Hole: with cylindrical hole Application: turning Model series: ISO turning indexable inserts Suitable for continuous to slightly interrupted cuts Compatible holder determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? This Tungaloy TNMG 110404 T9215 insert is primarily developed for medium steel machining, offering a balance of wear resistance and toughness suitable for standard and production applications. Can the insert be used on interrupted cuts? Yes, the T9215 grade tolerates continuous to slightly interrupted cutting conditions; heavy interruptions should be evaluated against holder rigidity and cutting parameters. How is the insert mounted and what components are required? The insert seats in standard ISO holders or boring bars; system components typically include the insert, a matched external holder or boring bar, a shim/clamping set and replacement screws for secure assembly. Does the chipbreaker work on both sides of the insert? The double-sided chipbreaker provides controlled chip formation for both cutting edges, enabling the insert to be indexed and reused, improving economy. What does the 0.4 mm radius affect in the finished part? A 0.4 mm corner radius supports finer edge transitions and improved surface finish while maintaining sufficient strength at the cutting edge for productive metal removal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Combine CVD-coated durability, a 0.4 mm corner radius and a 60° triangular form for efficient medium-steel turning — order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. TNMG 110404 T9215 — TNMG turning insert for medium steel, 60° triangle by Tungaloy TNMG 110404 T9215 is an ISO-standard indexable turning insert designed for external and internal turning applications in medium steel machining, offering high wear resistance and stable performance. CVD-coated carbide for high wear resistance Triangular 60° insert with 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole mounting Optimised for medium steel turning operations Improved cycle times through predictable cutting performance The CVD-coated carbide grade T9215 delivers a balance between high wear resistance and fracture toughness, enabling sustained cutting at productive feed rates. The coating reduces flank and crater wear under continuous and lightly interrupted cuts, resulting in more consistent cycle times and fewer unplanned insert changes. With a triangular 60° geometry and a 0.4 mm corner radius, this insert provides a reliable compromise between edge strength and surface finish, supporting higher material removal rates when paired with a compatible holder and appropriate cutting parameters. Compatibility guidance for reliable tool assembly Compatibility with the matching toolholder depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; the ISO designation ensures standardisation across systems. The insert features a cylindrical hole and is double-sided, allowing economical index changes without regrinding. Operators should select the chipbreaker and grade to match workpiece stability and machining strategy — for external roughing choose a more robust chipformer, for finishing a finer one — and verify clamping elements and backing pads for correct seating and torque. Coating and geometry explained for longer tool life The CVD-coated surface of this insert forms a hard, wear-resistant barrier while maintaining a tough substrate beneath, which reduces edge chipping during slightly interrupted cuts. The triangular form (60°) combines multiple usable cutting edges with straightforward indexing, and the 0.4 mm corner radius supports dimensional accuracy without excessive cutting forces. Regular monitoring of edge condition and adherence to recommended feeds and speeds will extend service life and keep component tolerances within specification. Contact Metav Werkzeuge today to specify the Tungaloy TNMG 110404 T9215 for improved productivity and consistent tool life; our consultants will advise on the correct holder, chipbreaker and process parameters to suit the intended turning application. Technical data Product name: TNMG110404 T9215 Tungaloy insert Manufacturer article number: 6782315 SKU: 6782315-Tungaloy Manufacturer SKU: TUN6782315 Model series: ISO turning indexable inserts Facts Insert size: 11 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Special features Coating / grade: T9215 (CVD-coated) Material: carbide Chipbreaker: double-sided Hole: cylindrical hole Plate form: triangular Application: turning (external and internal) ISO-standard insert series FAQ What materials is this insert best suited for? The TNMG 110404 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and breakage stability for productive turning operations. Can the insert be used for interrupted cuts? Yes, the CVD-coated carbide and the grade’s toughness make the TNMG 110404 T9215 suitable for continuous to lightly interrupted cuts; more severe interruptions require assessment of holder rigidity and cutting parameters. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges per side and, being double-sided, allows multiple indexings before disposal. What should be checked for holder compatibility? Compatibility is determined by insert form, clearance (frewinkel) 0°, tolerance class, fixing type, size and thickness; ensure the holder matches the ISO form and secures the insert correctly. Is the product supplied as original Tungaloy tooling? The TNMG 110404 T9215 is offered as a brand-new original from the manufacturer and supplied with the manufacturer article number 6782315. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high productivity and durable wear resistance offered by the CVD‑coated carbide T9215 grade together with a 0.4 mm corner radius and a 60° triangular geometry for reliable medium‑steel turning; order the TNMG110404 T9215 directly via Metav Werkzeuge or consult our specialists for process optimisation. TNMG110404 T9215 — Indexable turning insert, CVD‑coated carbide, 60° (Tungaloy) The TNMG110404 T9215 is an ISO‑standard triangular insert engineered for turning applications, designed to deliver consistent performance in medium steel machining with a robust chip control solution for continuous and light interrupted cuts. CVD-coated carbide grade T9215 60° triangular geometry, 0° clearance angle 0.4 mm corner radius for balanced edge strength Double-sided chipbreaker, cylindrical mounting hole Productive cutting for medium steel turning The insert delivers a clear productivity benefit through its CVD‑coated wear layer and carbide substrate, which together reduce flank and crater wear in sustained production. The coating improves thermal resistance and adhesion while the substrate provides core toughness; this combination enables higher cutting parameters than uncoated grades, translating into shorter cycle times and predictable tool change intervals. In practical terms, the insert is intended as a first choice for mid‑range steel applications where consistent tool life and process stability are priorities. Predictable edge life and secure chip control With a 0.4 mm corner radius and a double‑sided chipbreaker, the cutting edge balances strength and finish quality: the modest radius resists chipping while supporting acceptable surface integrity on outer and internal turning. The chipbreaker geometry assists in forming controllable chips under continuous or slightly interrupted cuts, reducing the risk of entanglement and improving swarf evacuation. Those seeking to improve machining efficiency will appreciate the repeatable wear behaviour and the capacity to maintain component tolerances over longer tool runs. Compatibility, handling and practical benefits The insert conforms to ISO dimensions and is supplied with a cylindrical centre hole for positive location in standard triangular pockets; compatibility with holders depends on form, clearance angle, tolerance class, fastening and size, so selection of the correct seat and clamp is essential for achieving expected performance. The plate thickness of 4.76 mm and nominal size of 11 mm provide mechanical stability in the clamping system. For shops introducing this grade, the straightforward indexable design means fast insert changes, minimal setup time and efficient inventory management. Application focus and machining guidance This grade is optimised for medium steel workpieces in both external and internal turning operations. The insert performs well under continuous cutting and light interruptions; when facing heavier interruptions, adjustments to feed or entry strategy are advisable to preserve edge integrity. Process engineers will value the repeatable cutting behaviour and the reduced need for frequent regrinding, supporting predictable throughput in batch production. Select the Tungaloy TNMG110404 T9215 insert for high‑productivity medium‑steel turning and contact Metav Werkzeuge for tailored application advice and prompt supply Technical Data Article number: 6966210 Manufacturer SKU: TUN6966210 SKU: 6966210-Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts ISO designation: 110404 Size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical Special features Material: carbide Coating: CVD‑coated Grade: T9215 Chipbreaker: double-sided Plate form: triangular Mounting: with hole Suited for continuous and light interrupted cuts FAQ What materials is this insert best suited for? The TNMG110404 T9215 insert from Tungaloy is optimised for medium‑grade steel machining and offers a balance of wear resistance and toughness for productive turning. How many usable edges does the insert provide? As a double‑sided triangular insert, this TNMG110404 T9215 supplies multiple indexable cutting edges per insert, allowing economical use before replacement. Is the insert compatible with standard ISO triangular holders? Compatibility depends on holder form, clearance angle and clamping system; the TNMG110404 follows ISO dimensions and locates by a cylindrical hole for standard triangular pockets. What benefits does the CVD coating bring? The CVD‑coated surface on this carbide insert improves thermal and abrasive wear resistance, enabling higher cutting speeds and longer tool life in continuous turning operations. Can the insert handle interrupted cuts? The T9215 grade is suitable for continuous and light interrupted cuts; for heavy interruptions, adjust cutting parameters or choose a grade designed for interrupted machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, a 0.4 mm corner radius and a double-sided chipbreaker for high-productivity medium-steel turning. Check holder compatibility by matching form, clearance angle and size, or consult Metav Werkzeuge for tailored advice and ordering. TNMG 110404 T9215 — ISO triangular turning insert by Tungaloy TNMG 110404 T9215 is an ISO-indexed triangular turning insert intended for medium-steel machining in ISO-compatible toolholder systems CVD-coated carbide grade T9215 for medium steel Triangular TNMG insert with 0.4 mm corner radius Double-sided chipbreaker for continuous and interrupted cuts Compatible with ISO turning systems, cylindrical hole Maximised productivity for medium-steel turning The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers a balance between prolonged tool life and reliable fracture resistance. The T9215 grade is optimised for mid-range steel machining where steady material removal and repeatable performance are priorities. In practice, this means less frequent index changes, sustained dimensional stability and more predictable tool-life windows, which supports efficient production planning and lower per-part tooling cost. Consistent chip control and improved process stability The double-sided chipbreaker geometry is designed to shape chips reliably during both continuous and lightly interrupted cuts, reducing the risk of entanglement and improving surface finish. By directing chip flow and moderating cutting forces, the chipbreaker helps maintain a stable cutting edge and reduces machine stops for chip clearing. For operations that alternate between steady and slightly interrupted cuts, this insert provides consistent behaviour, decreasing variability in cycle times and rework rates. Precise fit and system compatibility to reduce setup uncertainty Sized for ISO systems, the insert features a triangular plate form with a 0.4 mm corner radius and a plate thickness of 4.76 mm, with a plate size of 11 mm and a clearance angle of 0°; the insert seating angle measures 60°. The cylindrical hole and specified fixation geometry ensure repeatable clamping when matched to a compatible holder. To achieve proper performance, holder compatibility must be verified by checking form, clearance, tolerance class, fastening and thickness; the designation TNMG110404 simplifies identification within ISO turning standards. Practical advantages for workshop operations and planning Using a grade that combines wear resistance with fracture toughness supports higher cutting speeds and longer tool life under continuous operation, contributing to more cost-effective batch runs. The insert’s geometry and coating reduce the frequency of tool changes and help sustain surface quality, which benefits downstream processes. If uncertainty remains about holder fit or process parameters, Metav Werkzeuge provides technical guidance and can supply the correct insert and consumables to match the application and machine setup. For high-productivity medium-steel turning with Tungaloy grade T9215, contact Metav Werkzeuge to confirm holder compatibility or to place an order for the TNMG110404 T9215 insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772303 Manufacturer SKU: TUN6772303 SKU: 6772303-Tungaloy ISO designation: TNMG110404 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Plate angle: 60° Hole: with cylindrical hole Special features CVD-coated carbide grade T9215 Triangular plate form (TNMG) Double-sided chipbreaker ISO-indexed turning insert series Suitable application: turning (Drehen) Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What applications is this insert intended for? This insert is specified for turning (Drehen), particularly for medium-steel machining using ISO-compatible toolholders; the TNMG110404 T9215 excels in continuous to lightly interrupted cuts. Which materials does the T9215 grade suit best? The T9215 CVD-coated carbide is designed as a first choice for medium steel, offering a balance of wear resistance and fracture toughness for productive machining. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker on the insert improves chip formation and control during continuous and slightly interrupted cuts, enhancing surface finish and reducing machine downtime for chip clearance. What are the key dimensions to check for holder compatibility? Key dimensions include plate size 11 mm, plate thickness 4.76 mm, corner radius 0.4 mm and the cylindrical hole; matching these and the 60° seating angle to the holder ensures correct clamping for the 6772303-Tungaloy insert. Can this insert be used for interrupted cuts? Yes; the T9215 grade and the chipbreaker geometry provide sufficient toughness for light to moderate interruptions in cutting, while maintaining wear resistance for longer tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9225 Wendeplatten - Tungaloy
A precise blend of CVD-coated carbide and the robust T9225 grade delivers consistent cutting under medium-to-heavy steel conditions, while ISO compatibility reduces setup time; order directly via Metav Werkzeuge or consult our specialists for holder matching and cutting parameters. TNMG 110404 T9225 — ISO turning insert, triangular 60° (Tungaloy) TNMG 110404 T9225 is an ISO‑standard turning insert designed for external and internal turning in steel; the triangular 60° geometry and double‑sided chipbreaker suit interrupted cuts and varying engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Double-sided chipbreaker for interrupted cuts Triangular 11 mm plate with 0.4 mm radius Consistent performance for medium-to-heavy steel turning The TNMG 110404 T9225 insert is engineered around a CVD-coated carbide substrate that combines hardness with improved toughness. This T9225 grade is specified for medium to heavy steel machining where variable engagement or slight interruptions require a tougher cutting edge rather than a purely wear‑optimised grade. The coating reduces flank wear and supports longer edge life, which translates into fewer changeovers and more predictable machining cycles. By choosing a grade focused on stability, production planners benefit from reduced scrap risk and steadier surface finish in demanding turning operations. Seamless integration into ISO tool systems for rapid setup Compatibility with a holder depends on form, relief angle, tolerance class, fastening, size and thickness; the insert’s ISO-standard geometry and cylindrical hole simplify matching to common external holders or boring bars. The listed 0° relief angle and triangular 60° included angle guide selection of an appropriate clamp and mounting concept. Explaining terms: relief (clearance) angle prevents rubbing behind the cutting edge, tolerance class affects run‑out and seat fit, and the hole style defines clamping options. Clear compatibility criteria reduce assembly time and help avoid improper seating that could otherwise compromise tool life. Lower downtime through predictable edge geometry and chip control The combination of a double-sided chipbreaker and a 0.4 mm corner radius supports controlled chip formation in interrupted cuts and provides stable cutting forces. The plate’s 4.76 mm thickness and 11 mm size give mechanical rigidity, while the triangular shape creates multiple indexable edges for efficient edge rotation. Good chip control reduces heat concentration and surface damage, so fewer unplanned stops for edge changes are needed. The result is a more economical process with reliable part quality and reduced intervention by operators. For tailored advice on integrating Tungaloy T9225 inserts into existing tool systems and to secure fast delivery, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for an application consultation Technical Data Article number: 6787109 SKU: 6787109-Tungaloy Manufacturer SKU: TUN6787109 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features Material: CVD-coated carbide Grade: T9225 (robust universal) Chipbreaker: Double-sided Hole: Cylindrical hole (with hole) Shape: Triangular indexable insert Application: External and internal turning FAQ Is this insert compatible with standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the TNMG 110404 T9225 follows ISO dimensions and uses a cylindrical hole for common clamping solutions. Which materials is this grade best suited for? The T9225 grade in the TNMG 110404 T9225 insert is intended for medium to heavy steel machining and performs well under slightly interrupted cuts where toughness is needed. How does the double-sided chipbreaker help in practice? The double-sided chipbreaker on the TNMG 110404 T9225 promotes controlled chip formation and evacuation during interrupted or variable cuts, improving surface finish and reducing the likelihood of built‑up edge. What should be included in the tool system for correct use? A complete system comprises an ISO turning insert, a matching external holder or boring bar, an appropriate backing/clamping set and the correct screws; the TNMG 110404 T9225’s cylindrical hole and seat dimensions guide the choice of these components. What are the key geometry data to check before ordering? Check the TNMG 110404 T9225 for its triangular 60° geometry, 0.4 mm corner radius, 4.76 mm thickness, 11 mm size and 0° relief angle to ensure proper fit and expected cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for medium to heavy steel machining and a triangular geometry that suits standard ISO holders; combine robustness, stable edge life and simple integration into existing tool systems. Order the TNMG110404 T9225 indexable insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. TNMG110404 T9225 — Tungaloy ISO turning insert (triangular, 11 mm, CVD-coated) The TNMG110404 T9225 is an ISO-standard triangular indexable insert designed for external and internal turning, providing a robust universal grade for varying engagement conditions and intermittent cuts. CVD-coated carbide grade T9225 Triangular insert, 11 mm cutting size Double-sided chipbreaker, robust universal grade Cylindrical hole, 4.76 mm plate thickness Consistent cutting performance through CVD-coated carbide The insert’s CVD-coated carbide substrate delivers a balance of hardness and toughness tailored to medium to heavy steel machining. The graded T9225 coating improves wear resistance and thermal stability at elevated cutting temperatures, which leads to longer tool life and fewer insert changes during production runs. This translates directly into more consistent cycle times and reduced machine downtime, making the component a reliable choice for stable, repeatable turning operations. Geometry and ISO compatibility that simplify tooling decisions A triangular plate form with an 11 mm cutting size and a 0.4 mm nose radius provides predictable entry characteristics and clear orientation for external and internal turning tasks. The insert’s 0° clearance and 60° included angle follow ISO geometry conventions, so compatibility with holders depends on form, free angle, tolerance class, fastening and thickness. The central cylindrical hole supports secure clamping and easy indexability, enabling quick replacement and accurate location in standard external holders. Stable chip control and process security under variable conditions The double-sided chipbreaker combined with the universal grade is designed to handle interrupted cuts and fluctuating engagement, offering stable chip formation across a broad range of cutting parameters. This results in improved surface finish consistency and reduced risk of edge chipping when conditions vary. From a production perspective, the improved process security helps to lower scrap rates and supports predictable tool-change intervals, which is advantageous for both small-batch work and volume turning. System view: choosing the right components for productive turning A complete, productive setup is more than the insert alone: an ISO-standard insert should be paired with a suitable external holder or boring bar, the correct shim or clamping kit and replacement screws to ensure repeatable clamping and geometry. Selecting the appropriate chipbreaker and grade in relation to workpiece stability and machining strategy helps to unlock the productivity benefits of the system. For complex or mixed-material series, matching insert grade and chipbreaker to the workpiece and cutting conditions supports efficient machining and longer cumulative tool life. Contact Metav Werkzeuge for tailored advice on the TNMG110404 T9225 insert, including recommendations for holders, chipbreaker selection and technical data — reach us at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966240 Manufacturer SKU: TUN6966240 SKU: 6966240-Tungaloy Model series: ISO turning indexable inserts Article label: TNMG110404 T9225 Tungaloy indexable insert Core specifications Insert designation: TNMG110404 ISO code: 110404 Cutting size: 11 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Included angle: 60° Hole: cylindrical hole (with hole) Materials & features Material: cemented carbide Coating: CVD Grade: T9225 (robust universal) Shape: triangular, double-sided Chipbreaker: double-sided Typical application: external and internal turning System components: insert, appropriate external holder, shim/clamping set, spare screws FAQ What materials is this insert suitable for? The TNMG110404 T9225 indexable insert (Tungaloy, indexable insert, SKU 6966240-Tungaloy) is intended primarily for medium to heavy steel machining and performs well when varying engagement or light interruptions occur. How does the T9225 grade benefit production runs? Tungaloy’s T9225 grade provides enhanced wear resistance and toughness through its CVD-coated carbide construction, giving longer edge life and more predictable tool-change intervals in continuous or batch turning. Is the insert compatible with ISO toolholders? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the insert follows ISO geometry (110404), so it fits standard ISO external holders designed for TNMG inserts. Can the insert be indexed to use both sides? Yes, the triangular, double-sided design enables indexing to a fresh cutting edge, doubling edge economy and reducing the frequency of insert replacements during production. Which system parts are recommended to complete a reliable setup? A complete setup includes a compatible external holder or boring bar, suitable shim or clamping kit and replacement screws; choose the chipbreaker and grade according to workpiece material and machining stability for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9225 Wendeplatten - Tungaloy
Combine the CVD‑coated carbide toughness of the T9225 grade with a 0.4 mm nose radius and a 60° triangular geometry for stable, mid‑to‑heavy steel turning; the insert is ISO‑compliant and compatible with standard holders. Order the TNMG110404 T9225 insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 110404 T9225 ISO turning insert — Tungaloy The TNMG110404 T9225 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a robust universal grade for interrupted or variable cutting conditions. CVD‑coated carbide for robust cutting performance ISO triangular insert, 11 mm size Double‑sided chipbreaker for cost‑effective use Stable cutting performance under changing conditions The CVD‑coated carbide grade T9225 is engineered as a robust universal option for mid‑to‑heavy steel machining, providing additional toughness where intermittent engagement or variable cutting forces occur. The combination of a 0.4 mm radius and a 60° triangular geometry helps to maintain a consistent cutting edge while balancing strength and finish; the modest radius reduces edge chipping risk in unstable cuts and supports reliable tool life. This makes the insert particularly suitable when workpiece conditions change between continuous and slightly interrupted cuts, delivering consistent results in production environments. Clear compatibility and easy system integration The insert conforms to ISO dimensions (110404), so compatibility with a toolholder depends on the insert form, 0° clearance angle, tolerance class, fastening method, size and thickness. Key physical parameters include 11 mm inscribed circle, 4.76 mm plate thickness and a cylindrical hole, which together determine clamping and seat fit in external holders or boring bars. The standard system setup comprises the ISO insert, a corresponding external holder or boring bar, an underlay/clamping set and replacement screws, enabling straightforward integration into existing tool systems and rapid replacement cycles without custom adaptations. Efficient chip control and economical use The double‑sided chipbreaker provides two cutting edges per indexation, increasing uptime and reducing tooling cost per edge. The chipbreaker geometry focuses on controlled chip flow and improved surface quality for steel turning; choosing a chipbreaker and grade that match the workpiece and machining stability optimises both chip control and component finish. For manufacturers seeking balance between productivity and robustness, the insert’s design supports long runs with predictable wear behaviour and easy rotation to a fresh cutting edge, thereby lowering process interruptions and supporting consistent part quality. For reliable medium‑to‑heavy steel turning with genuine Tungaloy performance, contact Metav Werkzeuge for tailored advice or to request an order — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — our consultants will assist with holder compatibility and selection. Technical data Article number: 6780630-Tungaloy Manufacturer article number: 6780630 Manufacturer SKU: TUN6780630 Manufacturer: Tungaloy Facts ISO designation: 110404 Inscribed circle: 11 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Insert angle: 60° Clearance angle: 0° Special features Triangular plate form Cylindrical hole Double‑sided chipbreaker Grade: T9225 Coating: CVD‑coated carbide Typical application: turning Model series: ISO‑turning indexable inserts FAQ Which materials is this insert best suited for? The TNMG110404 T9225 insert from Tungaloy is intended primarily for steel applications, offering robustness for mid‑to‑heavy steel machining and good performance under slightly interrupted cuts. How does the insert fit into an existing holder system? Compatibility depends on the holder’s form, fastening, tolerance class, size and thickness; the ISO 110404 designation and the insert’s 4.76 mm thickness and cylindrical hole allow selection of matching ISO holders or boring bars for secure clamping. Can this insert handle interrupted cuts? Yes, the T9225 grade and the insert geometry are designed for increased toughness, making the TNMG110404 suitable for interrupted or variable cutting conditions encountered in many turning operations. How many edges are available per insert and how does the chipbreaker help? The insert is double‑sided, offering multiple indexable edges; the double‑sided chipbreaker improves chip control and contributes to economical use by extending productive time between indexations. What does the ISO code 110404 indicate? The ISO code 110404 describes the insert form and size family: a triangular insert with an 11 mm inscribed circle and geometry compatible with ISO‑standard toolholders. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust grade selection, ISO conformity and secure clamping for consistent turning results; the CVD‑coated T9225 carbide grade extends service intervals while the triangular 60° geometry ensures stability in medium to heavy steel turning — order directly via Metav Werkzeuge or request application advice from our consultants. TNMG 110404 T9225 turning insert — 0.4 mm radius, 60° triangle, Tungaloy The TNMG110404 T9225 is an ISO‑standard triangular turning insert for external and internal turning, engineered as a robust universal grade for medium to heavy steel machining. ISO‑standard triangular geometry CVD‑coated carbide T9225 0.4 mm nose radius for fine finishing Double‑sided chipbreaker, with centre hole Higher throughput through a balanced grade and geometry A CVD‑coated T9225 carbide grade provides a favourable balance between wear resistance and toughness, which translates into fewer tool changes and higher machine uptime. The 60° included angle of the triangular insert brings inherent stiffness at the cutting zone, supporting stable cuts when machining steels under varying engagement conditions. With a 0.4 mm nose radius the insert allows for improved surface finish without sacrificing process reliability, while the coating helps to resist built‑up edge and abrasive wear. This combination is designed to boost productivity in batch and single‑piece production alike. Secure clamping and compatibility for predictable results Clamping uses a central cylindrical hole together with the appropriate clamp or screw; the insert’s compatibility to a holder depends on form, 0° relief angle, tolerance class, fastening, size and thickness. The double‑sided chipbreaker gives two usable sides per face, simplifying indexing and stock management. As an ISO‑standard component, the geometry and hole style make it straightforward to find matching external holders or boring bars, reducing setup time and ensuring repeatable seating and alignment. Practical handling, system set‑up and selection guidance The insert has a plate thickness of 4.76 mm and a plate size of 11 mm, delivered in a triangular form with a cylindrical centre hole and a double‑sided chipbreaker. Typical system composition comprises the ISO insert, a suitable external holder or boring bar, a backing shim or clamp set and spare screws. For interrupted cuts or varying engagement lengths the robust universal grade is preferable; select the chipbreaker and grade in line with workpiece stability and cutting mode to obtain optimal tool life and surface quality. For robust medium‑to‑heavy steel turning with the Tungaloy T9225 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780635 SKU: 6780635-Tungaloy Manufacturer SKU: TUN6780635 Brand: Tungaloy Article name: TNMG110404 T9225 Tungaloy‑wendeplatte Model series: ISO‑turning inserts Facts Included angle: 60° Nose radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features Material: carbide Grade/coating: T9225 (CVD‑coated) Shape: triangular Hole: cylindrical centre hole Chipbreaker: double‑sided Application: external and internal turning Typical system: ISO insert + external holder or boring bar + shim/clamp set and spare screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials are best machined with this grade? The TNMG110404 T9225 insert is intended as a robust universal grade for medium to heavy steel machining; the CVD‑coating and carbide substrate help manage heat and wear during sustained turning operations. How many cutting edges does the insert offer before re‑indexing? A triangular, double‑sided insert like this typically provides six usable cutting edges (three corners, two usable faces each), enabling economical indexing and extended service life for the insert. How is the insert fixed to the toolholder? Fixing is achieved via the cylindrical centre hole and the corresponding clamp or screw in the holder; proper match of form, tolerance class, size and thickness is essential for secure clamping and repeatable performance. Can this insert be used for internal turning and boring operations? Yes — the insert is suitable for both external and internal turning when paired with the correct ISO‑compatible boring bar or internal holder and the appropriate clamping accessories. What dimensional checks are needed to ensure holder compatibility? Verify the included angle (60°), plate size (11 mm), plate thickness (4.76 mm), nose radius (0.4 mm) and the presence and style of the centre hole; matching these dimensions with the holder specification ensures correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, ISO compatibility and simple stocking thanks to a double-sided design; order the insert directly via Metav Werkzeuge or consult their team for application advice. TNMG 110404 T9225 Turning insert — Tungaloy triangular 60° TNMG 110404 T9225 is a CVD-coated indexable turning insert designed for medium to heavy steel machining in ISO turning systems, offering a balance of toughness and edge security for variable cutting conditions CVD-coated carbide grade T9225 Universally suited for medium–heavy steel Triangular geometry with 60° included angle Double-sided chipbreaker, hole for secure clamping Consistent edge life for interrupted and varying cuts The T9225 grade is a CVD-coated carbide engineered as a robust universal solution for turning applications where varying engagement or light interruptions occur. The coating provides heat resistance and improved wear behaviour, while the carbide substrate supplies the toughness required for medium to heavy steel machining. The 60° triangular geometry yields a broad support base and stable cutting edge, and the 0.4 mm corner radius supports both chip control and surface finish. In practice this means fewer tool changes, steady cycle times and reduced unplanned downtime thanks to predictable edge performance. Easy integration into ISO tool systems and reliable clamping Designed to the ISO indexable insert standard, compatibility is governed by form, clearance angle, tolerance class, mounting and thickness. The TNMG110404 features a cylindrical hole and a double-sided chipbreaker, enabling secure clamping and the option to rotate the insert for a fresh edge — an inventory-efficient choice for production environments. The 4.76 mm plate thickness and 11 mm inscribed circle combine to provide mechanical stability in common external and internal turning holders, while the zero-degree clearance frees angle supports neutral rake behaviour for predictable cutting forces. Productivity gains through controlled chips and stable machining A pronounced advantage of the double-sided chipbreaker and robust grade is stable chip formation under a range of cutting parameters, which simplifies swarf handling and reduces the risk of rework. The universal character of the grade allows one insert type to cover multiple workpiece conditions, lowering tooling complexity and purchasing overheads. For operations seeking to increase throughput without sacrificing surface quality, the mix of CVD coating, carbide core and triangular geometry delivers repeatable results and contributes to longer indexable life per edge. For reliable medium-to-heavy turning choose the Tungaloy T9225 grade and contact Metav Werkzeuge for availability, technical matching and ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966212 Manufacturer SKU: TUN6966212 Model series: ISO indexable turning inserts Material: Carbide Core specifications Designation: TNMG110404 Grade: T9225 Geometry: triangular, 60° Corner radius: 0.4 mm Thickness: 4.76 mm Size: 11 mm Design & features Coating: CVD Hole: with cylindrical hole Chipbreaker: double-sided Clearance angle: 0° Application: turning FAQ What materials is this insert best suited for? The TNMG 110404 in grade T9225 is formulated for medium to heavy steel machining and performs reliably when cutting conditions vary or when light interruptions occur. Will this insert fit my ISO turning holder? Yes — the insert follows ISO indexable insert standards; compatibility depends on form, clearance angle, tolerance, mounting, size and thickness, all of which align with common ISO holders for turning. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker on the TNMG110404 provides two usable cutting edges per index, improves chip control and reduces inventory needs by offering an economical edge rotation option. Is the clamping secure with the cylindrical hole design? The cylindrical hole ensures positive location and stable clamping in appropriate ISO-compatible holders, supporting repeatable seating and consistent cutting geometry. Can this insert be used for internal turning as well as external turning? Yes — the geometry and mechanical stability of the insert make it suitable for both external and internal turning operations within its intended application range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of proven PVD‑coated carbide performance, a 0.8 mm corner radius for versatile profiling and an ISO‑compliant triangular form to maintain steady production and fewer tool changes; order this insert directly via Metav Werkzeuge or consult our experts for application advice. TNMG 110408 AH6225 Tungaloy turning insert — PVD‑coated carbide, triangular 60° geometry The TNMG110408 AH6225 is an ISO‑standard triangular, indexable turning insert designed for external and internal turning operations, especially suited to rostfreier Stahl and variable cutting conditions. ISO triangular insert, 60° geometry PVD-coated carbide grade AH6225 0.8 mm corner radius for profiling Double-sided chipbreaker, with hole Consistent cutting performance for variable stainless applications The PVD‑coated carbide grade AH6225 combines a fine, sharp cutting edge with sufficient substrate toughness to handle medium machining tasks in rostfreier Stahl. The coating ensures improved wear resistance at elevated temperatures, which translates into fewer interruptions for tool changes and more predictable tool life. As an ISO‑conforming triangular insert, the component delivers a repeatable seating and orientation in compatible holders; compatibility is determined by insert form, 0° clearance, tolerance class, fastening style, size and thickness. This makes the insert a pragmatic choice where process stability and reproducible part quality are priorities. Productivity benefits that matter on the shop floor With a 60° geometry and a 0.8 mm corner radius, the insert balances strength and profile detail: the radius supports light profiling and controlled corner wear while the triangular form provides three indexable edges per side, reducing tooling cost per machined metre. The double‑sided chipbreaker helps create short, controllable chips in interrupted cuts and during unstable setups, improving evacuation and reducing the risk of built‑up edge. For operations that demand steady throughput and clear cost per component logic, this grade and geometry yield tangible efficiency gains. Simple set‑up and secure clamping for repeatable results The insert is supplied with a cylindrical hole for positive clamping in standard clamp designs; this promotes consistent seating and torque distribution across the clamp and screw. With a 4.76 mm thickness and an insert size of 11 mm, the component fits a broad range of ISO holders and boring bars; the nominal thickness supports rigidity in medium cutting regimes. When fitting the insert, ensure the chosen holder matches the form and tolerance class and verify the correct clamping torque for the screw to avoid seating errors. These practical steps translate technical specifications into reliable day‑to‑day performance. Planning spares and system compatibility to avoid downtime An ISO‑based system approach means the insert is part of a predictable tool set: an ISO turning insert, matched external holder or boring bar, a locating pad or clamp set, and replacement screws complete a robust assembly. The insert’s universal‑oriented AH6225 grade is intended to cover a wide range of rostfreier Stahl tasks, reducing the number of grades required in the tool crib. For inventory planning, keep a stock of inserts, clamps and screws aligned with the most frequent workpiece materials and stability conditions to minimise machine idle time and maintain consistent surface finishes. Contact Metav Werkzeuge for tailored application support on Tungaloy AH6225 inserts and advice on holder selection to ensure optimal results in rostfreier Stahl machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903211 Manufacturer SKU: TUN6903211 SKU: 6903211-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG110408 Core dimensions Insert size: 11 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 60° Features & applications Material: Hartmetall Coating / grade: AH6225 (PVD‑coated) Insert shape: triangular Hole: with hole — cylindrical hole Chipbreaker: double‑sided Application: Drehen (turning) FAQ What materials is this insert suitable for? The TNMG110408 AH6225 insert is optimised for rostfreier Stahl and performs across a broad range of stainless applications due to its PVD‑coated carbide grade. How is the insert clamped and secured in the holder? Clamping is achieved via the cylindrical hole and standard clamp/screw arrangements; the design ensures positive seating and repeatable orientation for each index. How many cutting edges does the triangular insert provide? The triangular form offers multiple indexable edges; the TNMG geometry typically permits several re‑indexes before disposal, improving cost efficiency. What benefit does the 0.8 mm corner radius deliver? A 0.8 mm radius balances edge strength with the ability to generate a controlled profile, helping to maintain surface finish while resisting premature corner failure. Is this insert compatible with all ISO holders? Compatibility depends on holder form, tolerance class, fastening method, size and thickness; verify these parameters against the holder specification before mounting the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade and the 0° relief geometry for a balanced mix of sharp cutting and edge stability; this combination delivers consistent finishing and extended tool life in medium-duty turning operations. Order the insert directly via Metav Werkzeuge or consult the specialists for holder compatibility and chipbreaker selection. TNMG 110408 AH6225 TNMG turning insert — PVD-coated carbide, 60° triangle (Tungaloy) TNMG110408 AH6225 is an ISO-format turning insert for external and internal turning, engineered for medium-duty applications and particularly suited to rostfreier Stahl machining PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl turning Triangular 60° insert with 0° relief Double-sided chipbreaker, with cylindrical hole Consistent cutting performance for medium-duty turning The combination of the AH6225 grade and PVD-coated surface provides a stable cutting edge that balances sharpness and wear resistance. Designed as a universal solution for rostfreier Stahl, this insert keeps flank wear predictable under variable conditions, reducing downtime for tool changes. The PVD layer increases resistance to built-up edge and maintains cutting geometry at moderate speeds, which helps sustain component surface quality and reduces rework in series production. Predictable fit and repeatable results on ISO tooling systems Produced to ISO dimensions, the insert’s 60° triangle form and 0° relief angle ensure repeatable engagement with standard external holders and boring bars. Critical dimensions such as 4.76 mm plate thickness, 11 mm inscribed size and a 0.8 mm corner radius support stable clamping and controlled cutting forces. The ISO conformity simplifies tool inventory management, permitting fast replacement and consistent part tolerances across shifts and machines. Operational economy through reversibility and secure clamping The double-sided chipbreaker and the central cylindrical hole allow for reversible use and secure clamping, improving cost-efficiency per cutting edge. Reversible geometry offers a quick index option when one edge is worn, while the chipbreaker design supports controlled chip formation in mixed machining conditions. For reliable results, match the chipbreaker pattern and grade to component material, machining strategy and machine rigidity to exploit the insert’s durability and surface-finish benefits. Contact Metav Werkzeuge for a compatibility check and expert recommendations on Tungaloy TNMG110408 AH6225 inserts for rostfreier Stahl turning applications Technical data Article number: 6947399 SKU: 6947399-Tungaloy Manufacturer SKU: TUN6947399 Material: carbide Model series: ISO-Drehwendeschneidplatten Facts Thickness: 4.76 mm Size: 11 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Special features Grade/coating: AH6225, PVD-coated Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning of rostfreier Stahl System components: ISO insert, compatible holders and clamping sets FAQ What materials is this insert best suited for? This insert, TNMG110408 AH6225 from Tungaloy, is designed as a universal grade for rostfreier Stahl and performs well in medium-duty stainless-steel turning. Is the insert reversible and how does that affect costs? Yes, the double-sided chipbreaker makes the insert reversible; this allows re-indexing to a fresh edge and improves cost-efficiency per cutting edge. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s insert pocket form, relief geometry, tolerance class, fixing method, size and thickness; confirm these parameters when selecting a matching external holder or boring bar. What advantages does the PVD coating provide? The PVD-coated AH6225 improves resistance to built-up edge and wear, maintaining geometry under moderate cutting speeds and delivering more consistent surface finishes. How should the chipbreaker be chosen for a specific job? Select the chipbreaker based on the workpiece material, the machining method (roughing/finishing) and the required stability; the double-sided design offers flexibility across several applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com