TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for stainless steels, a sharp yet stable cutting edge, and ISO compatibility for dependable turning performance. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. TNMG 110408 AH6225 triangular turning insert for turning — Tungaloy A TNMG 110408 AH6225 triangular indexable insert designed for reliable external and internal turning of stainless steels in medium machining conditions PVD-coated carbide, universal for stainless steel Sharp and stable cutting edge for medium cuts ISO triangular insert, 11 mm size Cylindrical hole, secure clamping fit Stable, efficient cutting for stainless steels The PVD-coated carbide grade provides a balance between sharpness and edge stability, making it suitable for machining stainless steels under varying operational conditions. Thanks to the PVD-coated surface, wear resistance is improved and flank wear is delayed, which helps maintain a consistent surface finish and extends tool life. The geometry focuses on delivering a sharp cutting edge while resisting chipping during interrupted cuts, so production runs remain predictable and tool-change intervals are minimised. Reliable fit and secure clamping in ISO systems The ISO-compliant triangular form and the cylindrical hole enable straightforward integration into common external holders and boring bars. The insert’s 4.76 mm thickness and defined 0° clearance are matching parameters that determine holder compatibility alongside tolerance class and fastening method. The double-sided chipbreaker layout offers reversible use to maximise economy; when mounted correctly, the insert achieves stable clamping and consistent chip control, reducing the need for repeated adjustments and improving process reliability. Practical handling and consistent production results The modest 0.8 mm corner radius provides a compromise between edge strength and dimensional accuracy, supporting medium-depth cuts with reduced vibration sensitivity. As a triangular indexable insert, it is reversible and therefore contributes to lower tooling inventory costs and shorter set-up times. The insert’s design and grade are optimised for a wide range of stainless steel turning tasks, delivering a dependable mix of productivity and surface quality while simplifying tool selection and stock management. For reliable stainless steel turning choose the Tungaloy AH6225 grade—contact Metav Werkzeuge for application support or to discuss suitable holders at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903204 Manufacturer SKU: TUN6903204 Metav SKU: 6903204-Tungaloy Product name: TNMG110408 AH6225 Tungaloy insert Core specifications Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Features & applications Shape: triangular Hole: cylindrical Coating / grade: PVD-coated carbide (AH6225) Chipbreaker: double-sided Application: turning (external and internal) Material suitability: stainless steels; medium machining, variable conditions FAQ What materials is this insert suitable for? The TNMG110408 AH6225 insert is formulated for machining stainless steels, offering a balance of edge sharpness and wear resistance suitable for medium turning tasks. How does the insert mount to standard holders? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the TNMG110408 features a cylindrical hole and ISO triangular form for secure clamping in appropriate holders. Can the insert be used on both external and internal turning operations? Yes, the geometry and double-sided chipbreaker make the insert suitable for both external and internal turning when combined with a matching holder and cutting parameters. What does the 0.8 mm corner radius affect in machining? The 0.8 mm corner radius provides increased edge strength and better vibration resistance, supporting stable medium-depth cuts while maintaining acceptable dimensional control. Is the grade reversible and cost-efficient? The triangular, double-sided design allows reversible indexing, which maximises the number of usable cutting edges and improves tooling economy for workshop stocks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Die Kombination aus PVD-coated AH6225 and an ISO-standard triangular form ensures consistent cutting performance and broad applicability for stainless-steel turning; the sharp yet stable cutting edge and a 0.8 mm corner radius provide reliable surface quality and economical tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for matching holders and parameters. TNMG 110408 AH6225 triangular indexable turning insert for turning — Tungaloy The TNMG110408 AH6225 is an ISO-standard triangular indexable turning insert designed for external and internal turning applications, optimised for machining stainless steels under medium cutting conditions. PVD-coated carbide grade AH6225 for wear resistance ISO TNMG 110408 triangular insert for standard holders 0.8 mm corner radius for versatile finishing and roughing Double-sided chipbreaker and cylindrical hole for secure clamping Consistent productivity for stainless-steel turning The combination of a PVD-coated surface and the AH6225 carbide formulation delivers an excellent balance between a sharp cutting edge and robust edge stability. This results in steady cutting forces and reduced flank wear during medium-duty operations on stainless steels, which in turn supports predictable tool life and fewer interruptions for index changes. The 0.8 mm corner radius improves edge strength while maintaining surface finish, meaning one insert can cover a wider range of passes without compromising quality. Secure fit and simple integration with ISO holders Compatibility depends on form, clearance angle, tolerance class, attachment type, size and thickness. The ISO-standard TNMG geometry and a cylindrical hole ensure reliable seating in matching external holders or boring bars; the 0° clearance facilitates consistent contact geometry and repeatable clamping. Translating these specs into practice: match the insert’s triangular form and thickness to the holder’s pocket and fastening screw to avoid run-out and to maintain concentricity for tight tolerances. Improved chip control and predictable machining behaviour The double-sided chipbreaker is engineered for reliable chip formation across varying feeds and depths of cut, reducing the risk of entanglement and machine downtime. For users less familiar with chipbreakers: this is a small groove or contour on the insert’s rake face that influences how chips curl and break. With the TNMG geometry and AH6225 coating, the insert supports stable cutting in variable conditions, helping to increase process reliability and reduce scrap rates. Contact Metav Werkzeuge for tailored holder matching, availability and advice on process parameters; Metav Werkzeuge can advise on optimal feeds, speeds and clamping for Tungaloy inserts and supply immediately where available (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: 6966262 Manufacturer SKU: TUN6966262 SKU: 6966262-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm With hole: yes (cylindrical hole) Special features PVD-coated carbide, grade AH6225 Triangular form (TNMG) Double-sided chipbreaker ISO-standard TNMG 110408 Designed for stainless steels Suitable for external and internal turning FAQ What materials is this insert optimised for? The TNMG 110408 AH6225 is optimised for stainless steels, with the AH6225 grade offering a mix of sharpness and edge stability for medium machining. How does the PVD coating benefit performance? The PVD-coated surface on this turning insert reduces adhesion, improves wear resistance and helps maintain a sharp edge under fluctuating cutting conditions. Can the insert be used in standard TNMG toolholders? Yes; the ISO-standard TNMG geometry and the cylindrical hole make the insert compatible with matching TNMG holders when the pocket, fastening and tolerance class are correctly selected. What does the double-sided chipbreaker mean in practice? A double-sided chipbreaker provides chip control on both indexable faces, enabling the insert to be turned over and reused, which extends service life and offers flexibility for varying feeds. Which dimensional values should be matched when selecting a holder? Match the triangular form, 11 mm plate size, 4.76 mm thickness, corner radius and the cylindrical-hole fastening to ensure correct seating and repeatable clamping with TNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and reliable PVD wear protection for consistent mid-range machining of stainless steel; order directly via Metav Werkzeuge or consult the team for selection support. TNMG110408 AH6225 Tungaloy Turning Insert — PVD-coated carbide, 0.8 mm corner radius TNMG110408 AH6225 Tungaloy insert for ISO-standard external and internal turning, designed for dependable performance on stainless steel in variable workshop conditions TNMG 110408 ISO geometry for turning PVD-coated carbide grade AH6225 Double-sided chipbreaker for consistent chips 0.8 mm corner radius for improved surface finish Predictable performance for stainless steel turning This ISO-format indexable insert delivers a balance of edge sharpness and stability that suits a wide range of turning tasks on stainless steel. The combination of the AH6225 grade and PVD-coated carbide creates a cutting edge that resists built-up edge and maintains form under fluctuating cutting conditions. For machining operations where surface quality and repeatability matter, the insert’s geometry and 0.8 mm corner radius help produce consistent part finishes while reducing the need for rework. The result is improved process stability and better utilisation of machine time. Compatibility and secure mounting reduce setup risk Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; this ISO insert is configured to match common external holders and boring bars. The 60° triangular shape with a cylindrical hole and a plate thickness of 4.76 mm ensures a reliable clamping interface and repeatable seating. Choosing an insert that adheres to ISO norms simplifies tool inventory management and reduces downtime when replacing cutters. Clear identification by the TNMG110408 designation aids quick selection and prevents mix-ups during tool changes. Coating and grade designed for productivity The PVD coating on the cemented carbide substrate acts as a thin, hard barrier against abrasive wear and adhesive tendencies typical of stainless steel machining. Compared with uncoated grades, the coating improves resistance to flank wear and helps maintain cutting-edge integrity under intermittent feeds. The AH6225 grade is optimised as a universal option for stainless steel, offering a compromise between toughness and wear resistance suitable for medium cutting depths and variable conditions. This supports longer, more predictable tool life and lower frequency of indexable insert changes. Chip control and surface quality in daily production A double-sided chipbreaker provides consistent chip segmentation on both orientations, assisting controlled evacuation and reducing the risk of tangling or wound-up swarf. For turning operations where chip behaviour affects cycle time and surface integrity, the designed chipformer contributes to safer, cleaner machining and fewer interruptions. The 0.8 mm corner radius also moderates cutting forces and improves edge robustness, which helps when switching between roughing and finishing passes without frequent insert changes. Practical impact for workshop planning Adopting this ISO insert supports a rational tooling strategy: standardised dimensions simplify replacement logistics, and the dual-sided design effectively doubles available cutting edges per insert, lowering tooling consumption per component produced. The defined geometry and the PVD-coated carbide composition permit conservative, reproducible cutting parameters that enhance throughput while maintaining quality. For production environments aiming for steady output and predictable tool life, this insert contributes to measurable gains in efficiency and process control. For tailored advice on selecting the right Tungaloy insert for stainless steel turning, and to ensure optimal integration with existing holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6966227-Tungaloy Manufacturer SKU: TUN6966227 Manufacturer article number: 6966227 Facts Corner radius: 0.8 mm Insert angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 Special features Grade: AH6225 Coating: PVD Chipbreaker: double-sided Shape: triangular Hole: with cylindrical hole ISO designation: TNMG110408 Material substrate: Hartmetall Application: Turning (external and internal) Typical system: ISO insert, compatible holder, clamp set and screw FAQ What materials is this insert intended for? The TNMG110408 AH6225 Tungaloy insert is primarily intended for machining stainless steel and is specified as a universal grade for such materials. How does the PVD coating benefit machining performance? The PVD-coated carbide on the TNMG110408 AH6225 insert increases wear resistance and reduces built-up edge formation, which helps maintain cutting geometry and extend usable edge life. Can the insert be used on both external and internal turning operations? Yes, the ISO-format insert and its geometry make it suitable for both external and internal turning when paired with an appropriate holder or boring bar. What are the key dimensions to check for holder compatibility? Verify the insert form, relief angle (0°), tolerance class, fastening method, size (11), and thickness (4.76 mm) to ensure correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tailored for rostfreien Stahl, a sharp yet stable cutting edge, and a compact triangular form for consistent medium turning operations; order directly via Metav Werkzeuge or consult our specialists for application matching. TNMG 110408 AH6225 Turning Insert – Tungaloy, PVD-coated carbide, R0.8 TNMG 110408 AH6225 is an ISO-style indexable insert designed for external and internal turning, optimised for rostfreien Stahl in medium-duty and variable conditions PVD-coated carbide grade AH6225 Sharp yet stable cutting edge Suitable for rostfreien Stahl machining Triangular insert, corner radius R0.8 Consistent medium-duty turning with reliable edge life The TNMG indexable insert delivers predictable performance where mixed batch sizes and varying workpiece conditions are common. The AH6225 grade combines a hard, wear-resistant substrate with a PVD-coated surface, which reduces built-up edge and extends tool life during intermittent feeds. For production environments that demand repeatability, this indexable solution maintains cutting edge integrity over successive indexings, reducing spindle downtime and supporting a steady throughput. Seamless integration into ISO turning systems As an ISO-standard turning insert, compatibility is determined by shape, clearance, tolerance class, fastening and thickness. The triangular geometry with a 60° included angle and 0.8 mm corner radius offers a balance between strength and edge acuity. The insert thickness is 4.76 mm, and the design incorporates a cylindrical hole for secure clamping. These specifications make the component straightforward to match with common external holders or boring bars that accept TNMG-type inserts, simplifying tool inventory and setup. Improved chip control and process stability Equipped with a double-sided chipbreaker, this insert promotes consistent chip formation across a range of feeds, which supports safer machining and easier evacuation in turning operations. The PVD coating enhances thermal resistance and adhesion, while the carbide body provides the necessary toughness for variable cutting forces. For rostfreien Stahl, where work-hardening and adhesion are concerns, the combination of sharp geometry and coating reduces friction and helps maintain surface quality during finishing and medium turning. Practical handling and production benefits The triangular, double-sided design enables multiple indexings, extending the usable lifetime per insert and improving cost efficiency in the toolroom. Identification is straightforward via the ISO designation and manufacturer SKU. Routine changes are quick thanks to the standardised hole and fastening interface; replacements and spare screws are part of a typical tool system kit. If process optimisation or grade selection is required for specific rostfreien Stahl alloys, expert advice is available to ensure the Tungaloy grade is applied where it brings the best economy and surface finish. Contact Metav Werkzeuge for application support and availability of Tungaloy TNMG 110408 AH6225 inserts for rostfreien Stahl turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947363 Manufacturer SKU: TUN6947363 SKU: 6947363-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: TNMG110408 Designation: TNMG Grade: AH6225 Material: carbide Core data Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 11 mm Clearance angle: 0° Included angle: 60° Hole: with hole (cylindrical) Special features Double-sided chipbreaker Triangular plate form PVD coating Application: Turning Schneidstofftyp: PVD-coated carbide FAQ How is this insert best used for rostfreien Stahl? The TNMG 110408 AH6225 insert from Tungaloy is formulated for rostfreien Stahl turning with a sharp, stable cutting edge and PVD coating to reduce adhesion and maintain surface quality. Is the insert compatible with standard TNMG holders? Yes. The TNMG110408 designation and cylindrical hole follow ISO conventions, enabling fitment in holders and boring bars designed for TNMG inserts. How many indexings are available on this insert? The triangular, double-sided design allows multiple indexings; the double-sided chipbreaker increases the number of usable edges before disposal. What does the AH6225 grade provide compared with uncoated carbide? AH6225 combines a wear-resistant substrate with a PVD coating to improve thermal resistance and reduce built-up edge during variable and medium machining. What are the geometric details to check before purchase? Confirm corner radius (0.8 mm), plate thickness (4.76 mm), included angle (60°) and hole style (cylindrical) to ensure holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH6225 grade and a sharp, stable cutting edge to secure consistent performance when machining rostfreien Stahl; the TNMG110408 insert offers robust geometry and straightforward compatibility with ISO holders — order directly via Metav Werkzeuge or consult our technical team for selection support. TNMG110408 AH6225 Tungaloy turning insert — PVD-coated carbide, 60° triangle TNMG110408 AH6225 is an ISO‑standard turning insert designed for external and internal turning, optimised for rostfreien Stahl with a balance of sharpness and edge stability PVD-coated carbide AH6225 Universal grade for rostfreien Stahl and mixed conditions Triangular form with 60° cutting angle 0.8 mm corner radius and double-sided chipbreaker Reliable performance for rostfreien Stahl in mixed conditions The PVD‑coated AH6225 grade combines a fine coating with a tough substrate to deliver consistent cutting behaviour when machining rostfreien Stahl. This universal grade is developed to maintain a sharp yet stable cutting edge, reducing the risk of edge breakdown during medium cutting operations and under changing process conditions. The result is improved productivity with fewer insert changes and a more predictable process window. Geometry and clamping for predictable repeatability The triangular form and 60° nominal cutting geometry provide a reliable seating and predictable cutting direction, while the insert’s dimensions ensure compatibility with ISO holders when form, relief angle, tolerance class, fastening and thickness match. A 0.8 mm corner radius gives a good compromise between edge strength and surface finish, making the insert suitable for operations that demand repeatable dimensional control and secure clamping. Chip control that supports surface quality Equipped with a double-sided chipbreaker, the insert promotes controlled chip formation in a range of cutting conditions. Improved chip control reduces the likelihood of rework and protects the workpiece surface, supporting better first‑pass quality. This focused design helps deliver a smoother finish on rostfreien Stahl components while maintaining efficient material removal. Durable substrate and coating for longer tool life Manufactured from cemented carbide and finished with a PVD coating, the insert is engineered for wear resistance and thermal stability during turning. The coating enhances edge adhesion and reduces abrasive wear, which contributes to longer tool life and lower total machining cost per part. For operations where repeatability and uptime are priorities, this grade offers a dependable balance of life and performance. Application scope and process advice The insert is intended for external and internal turning in medium machining regimes; selection of the correct chipbreaker and grade should be based on workpiece stability, cutting data and the specific rostfreien Stahl grade being processed. Where vibration is limited and clamping is rigid, the sharpness of the grade improves cutting efficiency; where stability is marginal, larger radii or reduced feeds may extend life. ISO conformity and system components for easy integration As an ISO‑standard insert, compatibility with holders is driven by form, relief angle, tolerance class, fastening method, size and thickness. The typical system includes the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. The 4.76 mm thickness and the option with cylindrical hole support straightforward mounting and secure fixation in most standard toolholders for turning operations. For reliable, ISO‑compatible turning of rostfreien Stahl with the Tungaloy AH6225 grade, contact Metav Werkzeuge for ordering or technical advice. Technical data Article number: 6947346 Manufacturer SKU: TUN6947346 SKU: 6947346-Tungaloy Model series: ISO‑Drehwendeschneidplatten Name: TNMG110408 AH6225 Tungaloy insert Core data Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 60° Thickness: 4.76 mm Inscribed circle: 11 mm Design and features Shape: triangular Hole style: cylindrical hole (with hole) Grade / coating: AH6225 (PVD‑coated) Material: cemented carbide Chipbreaker: double‑sided Application: Turning (external and internal) Compatibility criteria: shape, relief angle, tolerance class, fastening, size, thickness FAQ Is this insert suitable for rostfreien Stahl? Yes. The TNMG110408 AH6225 insert is a universal grade designed specifically for machining rostfreien Stahl, offering a sharp yet stable cutting edge for medium turning applications. What holder features must match for correct mounting? Compatibility depends on holder form, relief angle, tolerance class, fastening method, insert size and thickness; the TNMG110408 designation and the 4.76 mm thickness help ensure correct selection. Can the insert be used for internal turning as well as external turning? Yes. The insert is suitable for both external and internal turning when paired with an appropriate boring bar or internal holder designed for ISO‑standard triangular inserts. How does the chipbreaker affect process stability? The double‑sided chipbreaker on this insert supports controlled chip formation, which improves surface quality and reduces disruptions from erratic chip flow during turning of rostfreien Stahl. What specific material and coating does this insert use? The insert is made from cemented carbide and finished with a PVD coating in the AH6225 grade to enhance wear resistance and edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide toughness, a 0.8 mm corner radius for accurate profiling, and ISO conformity to keep turning operations reliable and productive. Order the insert directly via Metav Werkzeuge or contact their consultants for application advice and availability. TNMG 110408 AH6235 – TNMG indexable turning insert for turning, PVD-coated carbide, 0.8 mm radius (Tungaloy) The TNMG110408 AH6235 insert is an ISO-format, triangular indexable turning insert intended for external and internal turning, especially where stainless steels and interrupted cuts demand a tougher grade. PVD-coated carbide grade AH6235 0.8 mm corner radius for accurate profiling Double-sided insert with cylindrical hole ISO TNMG 110408 triangular format Maximise process stability when turning demanding steels The PVD-coated carbide grade AH6235 was chosen for its toughness and resistance to edge chipping, making it particularly effective on stainless steels and in interrupted cutting conditions. The PVD layer supports thermal stability at elevated cutting temperatures while the substrate retains fracture resistance; together these properties reduce unexpected tool changes and increase productive cutting time. For practical terms, the result is a more consistent surface finish and fewer rejects in series production, which supports predictable cycle times and lower overall cost per part. Secure clamping and ISO compatibility for straightforward tool setup Designed to the ISO TNMG 110408 format, the insert matches common triangular holders that accept the 11 mm inscribed circle and the 60° included angle. The combination of the 4.76 mm plate thickness and the cylindrical hole with secure clamping ensures reliable seating and repeatable positioning when reindexing the insert. Because compatibility depends on holder form, clearance angle, tolerance class and size, this indexable solution integrates into established tool families without the need for non-standard fixtures, simplifying tool inventory management. Better chip control and edge security in interrupted cuts The insert’s double-sided, two-sided chipbreaker geometry and the 0.8 mm corner radius balance edge strength and profile accuracy, which is important when machining steps, shoulders or interrupted surfaces. The tougher carbide grade reduces the risk of edge breakout while the chipbreaker promotes predictable chip formation, lowering the chance of workpiece damage and improving surface consistency. For operators transitioning from general-purpose grades, this insert offers a clear performance advantage on substrates that tend to work-harden. Practical handling, stock decisions and serviceability Indexing the insert allows two usable edges per side, increasing cost-effectiveness through extended life per insert. The PVD-coated carbide construction provides a robust compromise between wear resistance and fracture toughness, supporting longer tool life under mixed cutting regimes. For ordering and planning, refer to the ISO designation and manufacturer identifiers to ensure the correct geometry and grade are supplied; Metav Werkzeuge can advise on optimal lot sizes and lead times to match production schedules. Contact Metav Werkzeuge for tailored application advice or to reserve stock of this Tungaloy PVD-coated TNMG indexable insert and secure reliable supply for turning operations Technical data Article number: 6903397 SKU: 6903397-Tungaloy Manufacturer SKU: TUN6903397 Designation: TNMG110408 AH6235 Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: PVD Core data Corner radius: 0.8 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Included angle: 60° Free clearance angle: 0° Hole: with hole, cylindrical Special features Triangular plate shape Double-sided chipbreaker ISO-format TNMG 110408 Suitable for external and internal turning Grade optimised for stainless steels and interrupted cuts FAQ What materials is this insert best suited for? The TNMG110408 AH6235 Tungaloy indexable turning insert is optimised for stainless steels and is well suited to interrupted cuts where chip control and edge security are critical. Is the insert double-sided and indexable? Yes — the TNMG-format insert is double-sided and indexable, providing multiple usable cutting edges to extend tool life. Which size and holder compatibility should be checked before ordering? Check for ISO TNMG 110408 compatibility: 11 mm inscribed circle, 4.76 mm thickness and a 60° included angle; holder form, tolerance class and clamping method must match these dimensions. How does the AH6235 grade improve performance? The AH6235 PVD-coated grade increases toughness to resist chipping in interrupted cuts while maintaining good wear resistance, improving process reliability and surface quality. Does the insert include any special hole or mounting style? The insert is supplied with a cylindrical hole for conventional clamping systems and secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of precise edge stability and broad material suitability combined with secure clamping and ISO compatibility for reliable turning operations. Order through Metav Werkzeuge or consult the technical team for application-specific advice. TNMG110408 AH8015 TNMG turning insert for turning applications by Tungaloy — PVD-coated carbide, 60° triangular geometry TNMG110408 AH8015 is an ISO-standard indexable turning insert intended for external and internal turning; optimised for machining heat-resistant alloys and general-purpose tasks. PVD-coated carbide grade AH8015 60° triangle geometry for versatile turning 0.8 mm corner radius for controlled cutting Cylindrical hole for secure clamping Consistent edge life for heat-resistant alloys The PVD-coated AH8015 grade combines wear resistance and edge stability to suit the machining of heat-resistant alloys where both temperature tolerance and steady tool life are important. As a carbide component, the insert offers a balanced performance between hardness and toughness; this balance reduces unexpected wear and maintains surface quality over consecutive parts. The coating improves oxidation resistance at elevated cutting temperatures, which helps sustain component quality in serial production. Secure locating and reliable repeatability Designed as an ISO-compliant triangular insert with a cylindrical hole, the component ensures consistent seating in compatible holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness, but the 0.8 mm corner radius and 60° triangle form make the insert suitable for a wide range of turning tasks. The double-sided chipbreaker layout allows economical indexing and contributes to reproducible clamping forces, supporting machine uptime and predictable tool changes. Efficient workflow integration and straightforward selection As part of the ISO turning insert series, this triangular plate integrates easily into established tool systems: matching holders, shims and replacement screws complete the common setup. The plate thickness of 4.76 mm and 11 mm plate size make the geometry compatible with many standard carriers, reducing the need for special fixtures. For process planning, the insert’s balanced properties translate into fewer tool changes and simpler tool inventories, which supports predictable cycle times and cost-efficient production. Questions about suitability or variant selection can be directed to Metav Werkzeuge’s technical advisers for tailored recommendations. For demanding turning of heat-resistant alloys, consider the Tungaloy TNMG110408 AH8015 insert and contact Metav Werkzeuge for specification support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6966265 Manufacturer SKU: TUN6966265 SKU: 6966265-Tungaloy Article name: TNMG110408 AH8015 Tungaloy-Wendeplatte Key Figures Geometry angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Hole: with hole (cylindrical) Design & Features Material: carbide Coating / grade: AH8015 (PVD-coated) Plate form: triangular Chipbreaker: double-sided Series: ISO turning inserts Application: turning (external and internal) FAQ What machining tasks is this insert designed for? The TNMG110408 AH8015 Tungaloy turning insert is suitable for external and internal turning, with the AH8015 grade recommended as a first choice for general machining of heat-resistant alloys. What is the material and coating of the insert? The insert is produced from carbide and finished with a PVD-coated grade AH8015 to enhance wear resistance and thermal stability during cutting. How is the insert secured in the toolholder? Secure locating is achieved via the cylindrical hole and standard ISO interface; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. Is the insert indexable on both sides? The insert has a double-sided chipbreaker design, allowing reindexing and continued use of the opposite cutting edge to extend service life. Which dimensions are relevant for holder selection? Key dimensions are: plate size 11 mm, plate thickness 4.76 mm, corner radius 0.8 mm and 60° triangular geometry; the hole is cylindrical for standard clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 and a precise 0.8 mm nose radius to achieve reliable edge stability and consistent performance in turning operations; order directly via Metav Werkzeuge or consult our advisors for matching holders and clamping components. TNMG110408 AH8015 Tungaloy indexable turning insert — 60° triangular insert for turning TNMG110408 AH8015 is a triangular ISO indexable insert designed for external and internal turning in demanding materials, offering balanced wear resistance and cutting-edge stability. ISO TNMG110408 triangular insert, 60° cutting angle PVD-coated carbide AH8015 for heat-resistant alloys 0.8 mm nose radius for accurate profiles Double-sided chipbreaker, cylindrical hole for secure fit Consistent cutting performance with a PVD-coated grade The combination of PVD-coated carbide and the AH8015 grade provides a balanced mix of wear resistance and edge stability, making the insert particularly suited to the machining of heat‑resistant alloys. This composition reduces flank wear and maintains dimensional accuracy across longer tool lives, which translates into fewer interruptions for regrinding or insert changes and steadier production output. Where cycle time and repeatability matter, the coating supports higher temperature tolerance and helps preserve the cutting edge during continuous turning cycles. Reduced setup complexity and precise geometry for predictable results Designed as an ISO triangular insert with a 60° cutting angle, a 0.8 mm nose radius and a plate thickness of 4.76 mm, the component fits standard turning tool systems when the holder matches the form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole and double‑sided configuration permit secure clamping and economical use of both cutting edges. Stating the system requirements clearly simplifies tool planning: select a compatible external holder or boring bar, the correct shim/clamping set and replacement screws to ensure a stable assembly and repeatable clamping force. Better chip control and application flexibility for everyday turning The integrated double-sided chipbreaker supports controlled chip formation in many turning tasks and helps avoid entangling or poor evacuation in external and internal operations. Choosing the right chipbreaker and the AH8015 grade according to workpiece material and machine stability allows optimised cutting data and improved surface finish. For workshop planners and production engineers, these properties mean fewer process deviations and enhanced throughput for series and batch production. For reliable machining of heat‑resistant alloys, request the Tungaloy TNMG110408 AH8015 indexable insert via Metav Werkzeuge or contact our technical advisors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for assistance in selecting the ideal holder and clamping set Technical data Article number: 6762132 Manufacturer SKU: TUN6762132 SKU: 6762132-Tungaloy Model series: ISO turning inserts Grade/coating: AH8015 (PVD-coated) Material: Carbide Application: Turning Core data Insert size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Cutting angle: 60° Hole: with cylindrical hole Special features Triangular plate form Double-sided chipbreaker PVD-coated carbide grade AH8015 Compatible with ISO external holders and boring bars Suitable for heat‑resistant alloys System set-up: matching holder, shim/clamping set and replacement screws FAQ Which materials is this insert optimised for? The TNMG110408 AH8015 Tungaloy indexable turning insert is optimised for the general machining of heat‑resistant alloys, where the AH8015 grade offers a balance of wear resistance and edge stability. Can the insert be used on both external and internal operations? Yes, the TNMG110408 AH8015 insert is designed for external and internal turning, provided a compatible external holder or boring bar and appropriate clamping are used. How does the 0.8 mm nose radius affect profile accuracy? A 0.8 mm nose radius produces accurate profiles while offering a compromise between strength and detail; the radius helps maintain surface quality and dimensional consistency in common turning tasks. What does the cylindrical hole and double‑sided design mean for workshop use? The cylindrical hole and double‑sided design enable secure clamping and economical use of both cutting edges, reducing tooling costs per edge and simplifying replacement logistics. How should holders and clamping be selected for this insert? Select holders and clamping components that match the insert’s form, clearance angle, tolerance class, fastening method, size and thickness to ensure stable seating and repeatable results with the TNMG110408 AH8015 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015, 60° triangular geometry and an effective double-sided chipbreaker for steady metal removal and long tool life; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNMG110408 AH8015 Tungaloy insert — ISO turning insert, PVD-coated carbide, 60° triangle A TNMG110408 AH8015 Tungaloy insert for general turning, designed for reliable performance in the machining of heat-resistant alloys and versatile external and internal turning tasks. PVD-coated carbide grade AH8015 ISO-standard TNMG 110408 geometry 60° triangular shape with 0.8 mm radius Double-sided chipbreaker with cylindrical hole Increased productivity when machining heat-resistant alloys The combination of a PVD coating and a wear-resistant carbide substrate in this grade provides a well-balanced performance profile for alloyed, heat-resistant materials. The coating reduces built-up edge and oxidation at elevated cutting temperatures, while the substrate maintains edge stability under variable cutting forces. This results in more consistent cycle times and reduced tool-change downtime, which translates into measurable gains in throughput for production environments where process reliability is essential. Designed for reliable ISO compatibility and straightforward tool setup Compatibility with holders depends on geometry, clearance angle, tolerance class, fastening method, size and thickness. The insert is manufactured to ISO dimensions, making it straightforward to select the correct corresponding external holder or boring bar. The stated 0° clearance angle and standard thickness simplify matching to established holder families; attention to those parameters during tool selection ensures repeatable clamping and accurate cutting positions, supporting stable part tolerances and predictable tool life. Secure clamping and effective chip control for consistent surface finish The triangular 60° form with a 0.8 mm corner radius yields a balance between strength and the ability to produce a fine surface; the geometry supports both finishing and medium-turning operations. The double-sided chipbreaker promotes controlled chip formation across a range of feeds, reducing the risk of tangling and improving surface quality. A cylindrical hole provides positive and repeatable screw location, contributing to assembly stability and minimising vibration-related edge damage in demanding cuts. Balanced grade selection for everyday workshop demands Grade AH8015 is specified as the first choice for general machining of heat-resistant alloys, offering an equilibrium of wear resistance and cutting-edge robustness. In practice, this means fewer interruptions for insert changes and steady component quality across batches. For shops seeking a pragmatic, application-oriented solution, the insert is an economical choice that supports both productivity and ease of process planning. For tailored tooling recommendations or to obtain the TNMG110408 AH8015 insert from Metav Werkzeuge, please contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data. Technical Data Article number: 6762130 Manufacturer SKU: TUN6762130 SKU: 6762130-Tungaloy ISO designation: TNMG110408 Name: TNMG110408 AH8015 Tungaloy insert Core specifications Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Special features Material: carbide Coating: PVD, grade AH8015 Plate shape: triangular Chipbreaker: double-sided Hole: cylindrical hole Model series: ISO turning inserts Application: external and internal turning FAQ What materials is this insert suited for? The Tungaloy TNMG110408 AH8015 insert is specified for general machining of heat-resistant and alloyed materials, providing a balance between wear resistance and edge stability. How is the insert secured in the holder? The insert uses a cylindrical hole for positive screw clamping; correct holder matching to the ISO geometry and thickness ensures secure fastening and repeatable positioning. Can the insert be used for internal turning as well as external turning? Yes, the ISO-standard dimensions and triangular geometry make the insert suitable for both external and internal turning operations when paired with the appropriate holder or boring bar. What advantage does the PVD coating provide? The PVD coating on the AH8015 grade reduces oxidation and built-up edge at high cutting temperatures, improving consistency and extending effective tool life in demanding cuts. Which identifier should be used when ordering or requesting datasheets? Reference the article number 6762130 or the manufacturer SKU TUN6762130 when enquiring about the TNMG110408 AH8015 Tungaloy insert to ensure accurate product identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH8015 for reliable edge stability and a 0.8 mm corner radius that supports consistent tool life; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for process recommendations. TNMG 110408 AH8015 — Indexable turning insert for Turning by Tungaloy TNMG110408 AH8015 Tungaloy indexable turning insert designed for ISO-compliant external and internal turning, optimised for heat-resistant alloy machining PVD-coated carbide AH8015 ISO TNMG 110408 triangular insert Double-sided chipbreaker, with hole 60° included angle, 0.8 mm radius Reliable cutting performance for demanding turning operations The insert delivers consistent cutting performance through a balanced combination of PVD coating and a wear-resistant carbide substrate, making it suitable for the general machining of heat-resistant alloys. The geometry offers a 60° included angle and a 0.8 mm corner radius, which together contribute to stable cutting edges and predictable tool life. Selecting this insert supports process repeatability in batch production and one-off precision turning alike, since the insert’s form and tolerance class ensure repeatable positioning in ISO-compatible toolholders. The design emphasises efficiency and low variation in component quality during continuous operation. Material and coating advantages that extend service life The AH8015 grade represents a balanced trade-off between edge toughness and abrasion resistance. Combined with a PVD coating, the grade improves resistance to adhesive and abrasive wear mechanisms encountered when machining high-temperature alloys. This reduces flank wear rates and helps to maintain dimensional accuracy over multiple indexings of the insert. For operations where thermal loads and built-up edge are concerns, the insert’s material and coating deliver a measurable improvement in usable edge life while preserving cutting-edge integrity for improved surface finish. Compatibility, clamping and installation guidance Compatibility with toolholders is determined by the insert’s shape, relief angle, tolerance class, clamping method, size and thickness. This triangular insert has an 11 mm inscribed circle and 4.76 mm thickness, with a cylindrical locating hole for secure fastening. When selecting a holder or boring bar, ensure correct seat geometry and clamping torque to preserve the insert’s seating accuracy. The insert is double-sided, enabling two indexed cutting edges per side and reducing tooling costs per cutting edge. Proper clamping and correct screw torque help to avoid micro-movements that would otherwise affect bore or shaft tolerances. Process benefits: productivity, surface quality and versatility Using a grade tailored for heat-resistant alloys provides tangible process benefits: improved cut stability, more consistent surface finish and reduced rework. The insert’s chipbreaker geometry supports chip control for both external and internal turning, limiting entanglement and improving cycle times. For mixed-production environments, the insert’s balanced properties mean fewer tool changes and more uptime. Where productivity and predictable outcomes are priorities, this insert offers a cost-effective option that aligns with modern machining strategies and quality assurance routines. For expert advice on integrating Tungaloy TNMG 110408 AH8015 indexable inserts into specific turning processes or to place an order through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast supply. Technical Data Article number: 6947347 SKU: 6947347-Tungaloy Manufacturer SKU: TUN6947347 Model series: ISO turning indexable inserts Facts Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Material: Carbide Coating: PVD-coated Grade: AH8015 Chipbreaker: Double-sided Hole: Cylindrical locating hole Shape: Triangular Application: Turning Compatibility: Determined by form, relief, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? The TNMG110408 AH8015 insert is engineered for the general machining of heat-resistant alloys; the AH8015 grade and PVD-coated carbide substrate provide a balance of wear resistance and edge stability for such materials. Can the insert be indexed to present a fresh cutting edge? Yes, the triangular geometry is double-sided, allowing multiple usable cutting edges; correct indexing and clamping maintain repeatable positioning and extend usable life. What are the key dimensions to check when choosing a holder? Check the 11 mm inscribed circle, 4.76 mm thickness, 0.8 mm corner radius and the 60° included angle to ensure compatibility with the chosen toolholder and clamping system. How does the AH8015 grade affect machining performance? AH8015 offers a balanced combination of edge toughness and abrasion resistance; this helps to maintain surface finish and reduce unexpected edge failure when machining heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 carbide grade and the proven TNMG110408 geometry with a 0.8 mm corner radius for reliable turning of heat‑resistant alloys; order the TNMG110408 AH8015 Tungaloy insert directly via Metav Werkzeuge or request application advice from the consultancy team. TNMG 110408 AH8015 Turning Insert – PVD‑coated carbide, 60° seat (Tungaloy) The TNMG110408 AH8015 Tungaloy insert is an ISO‑standard triangular indexable insert designed for external and internal turning of heat‑resistant alloys, offering a balanced combination of wear resistance and cutting‑edge stability. TNMG110408 geometry, ISO‑standard 60° seat PVD‑coated AH8015 carbide for heat‑resistant alloys 0.8 mm corner radius for durable edge life Double‑sided insert with cylindrical hole Proven wear resistance for heat‑resistant alloys The combination of a PVD coating with the AH8015 cemented carbide substrate delivers consistent performance when machining heat‑resistant alloys. The coating reduces adhesive wear while the substrate provides a good balance between hardness and toughness, which leads to stable chip formation and longer edge life. For production environments that require reliable tool life and reduced changeover frequency, this specification translates into lower tooling costs per part and fewer unscheduled stops, supporting steady process flows. Geometry and clamping that support versatile turning The triangular form with a 60° seat and a 0.8 mm corner radius gives both strength at the cutting edge and versatility for finishing and light roughing passes. The insert is double‑sided, enabling economical use of both cutting edges, and the cylindrical hole ensures positive and repeatable clamping in standard ISO holders. With a plate thickness of 4.76 mm and inscribed circle size 11, the insert fits common external and internal turning toolholders; compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness, all of which should be checked before assembly to guarantee optimal cutting conditions. Practical guidance for selection and system setup Selection of the appropriate chipbreaker and grade should be guided by the workpiece material, machining type and machine‑tool rigidity. The TNMG110408 insert is supplied with a double‑sided chipbreaker, suitable for a broad range of turning tasks; however, choosing the correct chipbreaker profile and cutting parameters will further improve surface finish and swarf control. Typical system setup comprises the ISO indexable insert combined with a matched external holder or boring bar, a shim/packing plate, clamping set and the correct clamp screw; this assembly ensures repeatable positioning and safe cutting performance. For dependable results when turning heat‑resistant alloys, specify the Tungaloy TNMG110408 AH8015 insert through Metav Werkzeuge or contact Metav Werkzeuge for tailored machining recommendations at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6966228 Manufacturer SKU: TUN6966228 SKU: 6966228-Tungaloy Designation: TNMG110408 AH8015 Tungaloy insert Material: cemented carbide Coating: PVD Facts Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 11 Seat angle: 60° Relief angle: 0° Double‑sided insert Special features ISO‑standard turning insert series Triangular plate form Cylindrical hole for secure clamping Double‑sided chipbreaker Grade AH8015 engineered for heat‑resistant alloys Intended application: turning System components: insert, matching external holder/boring bar, shim/packing, clamp set and screws FAQ What materials is this insert best suited for? The TNMG110408 AH8015 insert and its PVD‑coated carbide grade are intended primarily for machining heat‑resistant alloys, offering balanced wear resistance and edge stability for general‑purpose turning tasks. How does the 0.8 mm corner radius influence performance? A 0.8 mm radius increases edge strength and improves durability under moderate cutting forces, making it suitable for light roughing and finishing where a compromise between strength and surface quality is required. Is the insert reversible or single‑use per edge? The insert is double‑sided, allowing the use of multiple cutting edges before disposal, which improves cost efficiency and reduces tool change frequency. What must be checked for holder compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fixing method, size and thickness; ensure the holder matches the TNMG110408 geometry, 60° seat and 4.76 mm plate thickness for secure mounting. Can this insert be used for internal turning? Yes, the geometry and size make it suitable for both external and internal turning operations when mounted in an appropriate boring bar or holder designed for TNMG inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110408 AT9530 Wendeplatten - Tungaloy
Optimise turning operations with a coated cermet insert that delivers consistent surface finish and predictable wear; order via Metav Werkzeuge or consult their specialists for holder compatibility and application advice. TNMG 110408 AT9530 Tungaloy turning insert — coated cermet, 0.8 mm corner radius The TNMG110408 AT9530 is an ISO triangular turning insert for finishing and light turning of steel, engineered to enhance surface quality and provide uniform wear under stable cutting conditions. ISO triangular insert TNMG form Coated cermet AT9530 for fine finish Double-sided chipbreaker for stable chips 0.8 mm corner radius for accurate contouring Greater process reliability through predictable wear and finish The combination of a coated cermet grade and a precise 0.8 mm corner radius targets finishing and light-turning tasks where a high-quality surface finish is essential. The AT9530 grade is developed to promote even wear rather than aggressive stock removal, which reduces the need for frequent insert changes and supports stable batch quality. The double-sided chipbreaker controls chip form on both cutting edges, improving tool life and lowering the risk of edge instability during interrupted cuts. Practical compatibility guidance for the workshop As an ISO-standard insert, compatibility depends on holder geometry: form, clearance angle, tolerance class, fastening method, size and thickness determine correct seating. The insert features a cylindrical hole, a plate thickness of 4.76 mm and an insert size of 11, which must match the corresponding external holder or boring bar. Specifying these parameters ensures correct clamping and repeatable positioning, enabling predictable cutting conditions and minimal set-up time in production environments where repeatability matters. Efficiency and material advantages for steel finishing Designed for turning of steel in finishing and light-roughing operations, the grade prioritises surface integrity and consistent wear patterns over aggressive metal removal. The coated surface reduces friction and helps prevent built-up edge, while the triangular form offers three usable cutting corners per side where applicable, which contributes to cost-efficient indexability. Selecting this insert supports lower rework rates and reliable part-to-part quality in serial production thanks to its tailored chip control and edge definition. Contact Metav Werkzeuge for application support and to confirm the correct holder for the TNMG110408 AT9530; quote SKU 6773709-Tungaloy or email info@metav-werkzeuge.com / call +49 2822 7131930 Technical data Article number: 6773709 SKU: 6773709-Tungaloy Manufacturer SKU: TUN6773709 Manufacturer article number: 6773709 Model series: ISO turning inserts Designation: TNMG110408 AT9530 Facts Thickness: 4.76 mm Insert size: 11 Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Grade/coating: AT9530 (coated cermet) Chipbreaker: double-sided Hole: with cylindrical hole Shape: triangular Application: turning (external and internal) System requirement: ISO-compatible holder, underlay/clamp set and screw FAQ Is this insert suitable for finishing steel? The AT9530 grade is formulated for finishing and light machining of steel, offering improved surface finish and even wear when used under appropriate cutting conditions with the correct holder. What does TNMG110408 mean for seating and orientation? TNMG indicates a triangular insert with a 60° included angle and the designation 110408 specifies the ISO size and geometry; the insert requires a matching ISO-profile holder for correct clamping. Can the insert be indexed to use multiple edges? Yes, the triangular shape provides multiple usable cutting corners, enabling indexable tool life benefits when the insert is rotated and reclamped. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker stabilises chip formation on both sides of the insert, improving chip control and reducing the likelihood of irregular tool wear and chatter in finishing cuts. Which holder parameters are critical for compatibility? Form, clearance angle, tolerance class, fastening method, size and thickness are decisive; ensure the holder matches the insert’s 4.76 mm thickness and 11 size for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product lists the material as "Hartmetall" (carbide) while the technical specification and grade (GT9530) indicate a coated cermet cutting material. Please verify and correct the material classification so a complete product description can be generated, ensuring that all relevant details are accurate and consistent across the documentation to avoid potential confusion or misrepresentation of the product's properties, which could lead to issues in application or customer dissatisfaction; it is crucial to align the listed material with the technical specifications provided to maintain clarity and reliability in the product's description and ensure proper usage.
TNMG 110408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated cermet cutting grade (NS9530) and a 0.8 mm corner radius for consistently superior surface finishes and low cutting forces; the ISO‑standard triangular geometry with a 60° included angle supports stable finishing cycles in production. Order directly via Metav Werkzeuge or consult our specialists for application guidance and availability. TNMG 110408 NS9530 — Tungaloy turning insert (uncoated cermet, 0.8 mm radius) The TNMG110408 NS9530 is an ISO‑standard triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. ISO‑standard triangular insert Uncoated cermet NS9530 finishing grade 0.8 mm corner radius for fine finishes Double‑sided with cylindrical hole Achieve finer surfaces with lower cutting forces The uncoated cermet grade NS9530 is optimised for finishing, delivering a sharp cutting edge and reduced friction that together produce a high surface finish on steel components. The combination of the triangular geometry and the 60° included angle ensures predictable engagement and stable cutting conditions; the modest 0.8 mm corner radius helps reduce vibration and leaves a refined contour on shoulders and profiles. As a finishing insert, it is especially effective in continuous cutting processes and when small depths of cut are required, allowing shops to meet tight surface‑quality specifications without sacrificing cycle reliability. Secure clamping and ISO compatibility for repeatable results The ISO designation and standard form mean compatibility with a broad range of external holders and boring bars: fit is determined by geometry, clearance angle, tolerance class, fastening method, size and thickness. The insert’s 0° relief angle and triangular plate form provide a predictable contact interface, while the cylindrical locating hole and the double‑sided design permit economical indexing and extended edge life. This combination supports a consistent process window and faster setup repeatability, which is beneficial in serial production where tool change frequency and downtime must be minimised. Practical efficiency: material match and workshop guidance As a finishing grade, this cermet insert delivers low cutting forces and excellent edge integrity; pairing the double‑sided chipbreaker with the correct holder and machining parameters reduces burr formation and improves dimensional consistency for both external and internal turning tasks. The plate thickness of 4.76 mm, triangular shape and the 0.8 mm corner radius contribute to rigidity at the cutting zone and make the insert suitable for small step cuts and fine turning passes. Select the chipbreaker and cutting data according to the workpiece grade and machine rigidity to extract the best tool life and surface quality from this insert. Contact Metav Werkzeuge for tailored application advice and stock availability for Tungaloy finishing inserts: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6797243 SKU: 6797243-Tungaloy Manufacturer SKU: TUN6797243 Brand: Tungaloy Model series: ISO turning inserts Numbers / Core technical data Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Thickness: 4.76 mm Plate size: 11 mm Design & special features Plate form: triangular Hole: with cylindrical hole Chipbreaker: double‑sided Grade/coating: uncoated cermet NS9530 Material: carbide Application: external and internal turning FAQ Which workpiece materials suit this insert best? The TNMG110408 NS9530 insert is formulated as a finishing grade for steel; its uncoated cermet composition delivers low cutting forces and excellent surface quality on common steel alloys. How many usable cutting edges does the insert provide? With a triangular plate form and double‑sided chipbreaker, the insert offers multiple indexable edges, enabling economical edge changes and extended service life for the Tungaloy turning insert (SKU 6797243-Tungaloy). Is the insert compatible with standard ISO holders? Yes; the ISO designation and standard geometry ensure compatibility with matching ISO holders and boring bars, subject to correct matching of form, clearance angle, tolerance class, fastening and size. What advantages does the NS9530 grade offer in finishing? NS9530 provides a sharp edge and low cutting forces, resulting in enhanced surface finish and reduced tendency to build-up on the cutting edge during continuous, low‑depth finishing operations. Can the insert be used for internal as well as external turning? The design and grade suit both external and internal turning applications; attention to holder rigidity and cutting parameters will ensure best performance in internal bores and external profiles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 NS9530 Wendeplatten - Tungaloy
Conflicting material information (cemented carbide vs uncoated cermet NS9530) detected; this inconsistency prevents the generation of a reliable product description, as accurate and consistent material data is essential for creating detailed, trustworthy descriptions that meet industry standards and customer expectations, ensuring clarity and avoiding potential misunderstandings or errors in communication regarding the product's specifications, applications, and performance characteristics, which are critical for informed decision-making and proper utilisation in relevant contexts.
TNMG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, a sharp cutting edge and a double-sided chipbreaker for consistent surface quality in serial turning operations. Order the Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for application support. TNMG 110408 NS9530 indexable turning insert for turning — Tungaloy TNMG 110408 NS9530 is an ISO‑standard triangular insert designed for fine finishing in turning applications, offering a sharp cutting edge and a cermet grade tailored to steel machining *ISO triangular insert TNMG form *Uncoated cermet grade NS9530 for finishing *Sharp cutting edge for low cutting forces *Double-sided chipbreaker with 60° geometry Consistent fine finishing for steel components This triangular ISO insert is built for finishing passes and light-profile work on steel. The uncoated cermet composition of grade NS9530 provides a stable, sharp cutting edge that reduces cutting forces and promotes a high surface finish on continuous cuts and small depths of cut. Because cermet grades deliver a fine microstructure at the cutting edge, wear progresses predictably, supporting repeatable part quality and reduced rework in production environments. Design features that improve process reliability Built in the familiar TNMG form with 60° geometry, the insert includes a double-sided chipbreaker and a central cylindrical hole for secure fastening. The corner radius 0.8 mm and 4.76 mm thickness contribute to edge strength while keeping the profile suitable for fine finishing. These mechanical attributes, combined with ISO standard sizing, make tool changeover and inventory management straightforward across compatible external holders and boring bars. Compatibility and correct holder selection Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s 0° clearance angle and triangular shape require a matching clamping seat and screw configuration; correct pairing ensures repeatable seating and stable machining. Suppliers and toolroom engineers will find the ISO designation useful when selecting the appropriate external toolholder or boring bar to maintain process stability. Practical benefits on the shop floor Using an insert tailored to finishing tasks reduces cycle time by lowering feed inconsistencies and minimising chatter on light cuts. The sharp cutting edge of NS9530 helps achieve required Ra values with fewer passes, and the double-sided chipbreaker supports consistent chip formation for predictable evacuation. Combined, these features improve throughput and enable higher first-pass acceptance rates, particularly in medium‑volume production where surface integrity and repeatability are priorities. Contact Metav Werkzeuge for tailored application advice and to secure Tungaloy TNMG 110408 NS9530 inserts for precision finishing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6710207 Manufacturer SKU: TUN6710207 Metav SKU: 6710207-Tungaloy Product designation: TNMG110408 NS9530 Tungaloy insert Application: turning Series: ISO turning inserts Brand: Tungaloy Core data Geometry: TNMG (triangular, 60°) Angle: 60° Clearance angle: 0° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 mm Hole: with cylindrical hole Chipbreaker: double-sided Special features Uncoated cermet grade NS9530 Sharp cutting edge for finishing steel Suited to continuous cuts and small depths of cut ISO‑standard dimensions for holder compatibility Stable chip formation and repeatable seating FAQ What materials is this insert intended for? This insert is optimised for finishing of steel; the NS9530 cermet grade is designed to deliver a sharp edge and excellent surface quality when turning steel components. Is the insert coated? The grade is an uncoated cermet, meaning the cutting edge is provided by the cermet substrate itself rather than by an external coating, which benefits fine finishing and edge stability. What does the TNMG110408 designation indicate? TNMG110408 denotes a triangular ISO insert with 11 mm inscribed circle and 4.76 mm thickness; the designation guides selection of compatible external holders and clamping hardware. Can this insert be used for roughing operations? The insert and NS9530 grade are primarily a finishing choice; for roughing or heavy interrupted cuts, a different geometry or a tougher grade would be more appropriate. How is the insert secured in the holder? The insert uses a central cylindrical hole and is clamped according to ISO conventions; correct holder selection ensures stable seating and consistent repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, proven chip control and straightforward ISO compatibility for steady, cost-effective production. For assistance or to place an order, contact Metav Werkzeuge or request guidance from our technical advisors. TNMG110408 T6215 TNMG Turning Insert for Turning – Tungaloy TNMG110408 T6215 is an indexable turning insert designed for stable to lightly interrupted turning operations on rostfreier Stahl and similar materials CVD-coated wear-resistant grade T6215 Optimised for rostfreier Stahl machining Double-sided chipbreaker for consistent chips ISO TNMG 110408 form for easy holder compatibility Longer tool life and consistent finishes thanks to advanced coating The CVD-coated carbide grade T6215 delivers a wear-resistant cutting edge engineered specifically for machining rostfreier Stahl under stable or mildly interrupted conditions. This surface treatment reduces adhesion and edge degradation, which results in a more predictable tool life and fewer unplanned indexings. Where surface quality is important, the coating helps maintain cutting geometry for longer, so the process produces repeatable surface finishes and minimises scrap rates. Rapid setup and reliable fit with ISO conformity The insert follows the ISO TNMG 110408 form, providing a familiar triangular geometry and standard dimensions that simplify toolholder selection and changeover. With an included angle of 60° and a relief/freeside angle of 0°, the geometry ensures predictable engagement and stable cutting forces. The 0.8 mm corner radius offers a balance between edge strength and finishing capability, while the plate thickness of 4.76 mm and the standard 11 mm size support robust clamping. Compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness, which together reduce setup time and lower the likelihood of mounting errors. Improved chip control and operational economy The insert’s double-sided chipbreaker and triangular plate design produce consistent chip formation and evacuation during turning, improving process security and reducing interruptions. The presence of a cylindrical hole supports secure clamping in a range of external holders or boring bars. As a result, the component offers a practical balance of tooling economy and machining reliability: fewer unexpected tool changes, stable cutting performance and efficient material removal rates contribute to lower cost per part in serial production. Contact Metav Werkzeuge for personalised advice and rapid supply of Tungaloy TNMG110408 T6215 indexable inserts – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6944872 Manufacturer SKU: TUN6944872 SKU: 6944872-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Included angle: 60° Relief/freeside angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features Shape: triangular plate Grade/coating: T6215 (CVD-coated carbide) Chipbreaker: double-sided Hole style: cylindrical hole (with hole) Application: Turning (Drehen) ISO designation: TNMG110408 FAQ Which materials is this insert best suited for? The TNMG110408 T6215 insert is formulated for machining rostfreier Stahl and performs well under stable to lightly interrupted turning conditions. How does compatibility with holders work for this insert? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the TNMG110408 form matches standard TNMG holders. Is the chip control suitable for continuous production runs? Yes, the double-sided chipbreaker on the TNMG110408 T6215 insert promotes consistent chips and contributes to process stability in series production. Can the insert be used for interrupted cuts? The T6215 grade is engineered for stable to mildly interrupted cutting; heavy interruptions may require a different geometry or a tougher grade. What index options does this insert offer? The triangular TNMG geometry provides multiple cutting edges per insert, and the double-sided chipbreaker supports efficient indexing for extended tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, CVD-coated carbide wear resistance and ISO conformity for steady production results; order the original TNMG110408 T6215 indexable insert through Metav Werkzeuge or consult the technical team for tailored recommendations. TNMG110408 T6215 TNMG indexable turning insert for turning – Tungaloy A TNMG110408 T6215 triangular ISO indexable insert developed for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for turning stainless steels Double-sided chipbreaker geometry ISO TNMG 110408 triangular insert Consistent chip control through proven insert geometry The TNMG110408 is a triangular indexable insert with a double-sided chipbreaker that supports predictable chip formation and evacuation during turning. The triangular shape gives three usable cutting corners per side, improving economical use of the insert. Compliance with ISO sizing simplifies holder selection and replacement, while the chipbreaker design reduces the risk of built-up edge when machining stainless steels, leading to more reliable cycle times and fewer interrupted finishes. Durable CVD-coated carbide for extended tool life A CVD-coated carbide substrate combined with the T6215 grade provides a wear-resistant cutting edge tailored for stainless steel turning. Chemical vapour deposition (CVD) creates a hard, uniform coating that improves thermal stability and abrasion resistance; this reduces flank wear and helps maintain dimensional accuracy over longer tool life. The result is a more consistent surface finish and reduced frequency of insert changes, which supports higher productivity and lower process costs in repetitive turning operations. Practical compatibility and handling for efficient tool changes The insert features a 0.8 mm nose radius, 4.76 mm thickness and a cylindrical hole, ensuring secure clamping in standard ISO-compatible holders. The 60° included angle and 0° relief angle define the cutting geometry and must be matched to the holder form, tolerance class and fastening method for optimal performance. System assembly normally comprises the ISO insert, a matching external holder or boring bar, a backing shim and the appropriate clamp screw; this modular approach simplifies stock management and minimises downtime during tool changeovers. For original Tungaloy TNMG110408 T6215 inserts and application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options. Technical data Article number: 6944824 Manufacturer SKU: TUN6944824 SKU: 6944824-Tungaloy Designation: TNMG110408 T6215 Facts Size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Material: carbide Coating: CVD Grade: T6215 Geometry: triangular Chipbreaker: double-sided Hole: cylindrical hole Model series: ISO indexable turning inserts Application: turning (external and internal); suited to stainless steels under stable to slightly interrupted conditions FAQ What workpiece materials is this insert suited to? The TNMG110408 T6215 insert is optimised for turning stainless steels, offering wear resistance and chip control appropriate for those alloys under stable to slightly interrupted cutting conditions. Which holder features must be matched to ensure compatibility? Compatibility depends on holder form, free (relief) angle, tolerance class, fastening method, size and thickness; the ISO designation TNMG110408 streamlines selection for standard external holders and boring bars. How many cutting edges are available per insert? The triangular TNMG form provides three primary corners; with a double-sided design and regrinding options, multiple effective cutting edges are available before replacement is required. Does the CVD coating influence cutting parameters? Yes. The CVD-coated carbide and the T6215 grade improve thermal stability and abrasion resistance, which typically allows stable machining at optimised parameters for stainless steels while preserving surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T6215 and a double-sided chipbreaker for stable stainless-steel turning with precise profile control; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110408 T6215 ISO turning insert, CVD-coated carbide, 60° — Tungaloy The TNMG110408 T6215 is an ISO-standard triangular turning insert designed for stable external and internal machining of stainless steels under steady to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 60° triangular geometry for versatile turning 0.8 mm corner radius for precise profiles Double-sided chipbreaker, with cylindrical hole Consistent, high-quality results for stainless-steel turning The insert delivers consistent results by combining a CVD-coated surface with a wear-resistant carbide substrate. The T6215 grade is formulated for rostfrei machining, offering predictable wear behaviour when turning stainless steels under stable cutting regimes. Choosing a cartridge with a double-sided chipbreaker reduces vibration and promotes controlled chip formation, which improves surface finish and reduces rework. This rationale-led benefit supports higher first-pass yield and steadier batch processing, particularly where repeatable geometry and low scrap rates are priorities. Simple integration into ISO holders and secure clamping Compatibility is governed by shape, relief angle, tolerance class, attachment, size and thickness; the triangular, 60° geometry of this insert matches standard ISO toolholders and boring bars. The central cylindrical hole provides reliable clamping and simplifies insert indexing, while the 4.76 mm plate thickness and 11 mm inscribed circle ensure mechanical stability in most common external and internal turning setups. These objective details enable straightforward selection of a suitable holder and reduce setup time, helping maintain throughput in mixed-production environments. Durable edge life and predictable chip control for production A 0.8 mm corner radius balances profile fidelity with edge strength, making this insert suitable for finishing and semi-finishing passes where dimensional accuracy matters. The double-sided chipbreaker design supports consistent chip breakage across a range of feeds, lowering the risk of entanglement in automated or high-volume workflows. Under the specified conditions—stable to slightly interrupted cuts—the combination of substrate and coating translates into longer effective tool life and fewer unexpected tool changes, which contributes to overall process reliability. For supply and application advice on Tungaloy inserts, contact Metav Werkzeuge to discuss matching holders, available pack sizes and delivery options via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6903044 Manufacturer SKU: TUN6903044 SKU: 6903044-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Dimensions & core data Shape: triangular Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Main angle: 60° Design and features Material: carbide Coating / grade: T6215 (CVD-coated) Chipbreaker: double-sided Hole: cylindrical, with hole Compatibility: ISO insert, requires matching holder FAQ What materials is this insert suitable for? The TNMG110408 T6215 Tungaloy turning insert (SKU 6903044-Tungaloy) is specified for machining stainless steel grades under steady to mildly interrupted cutting conditions. Does the insert fit standard ISO toolholders? Yes. The insert is an ISO-standard triangular type; compatibility depends on form, relief angle, tolerance, attachment method, size and thickness and the insert is intended to be used with matching ISO holders. Is the chipbreaker reversible or single-use? The insert features a double-sided chipbreaker, allowing indexing to a second cutting edge and extending usable life before replacement. What does the 0.8 mm corner radius mean in practice? A 0.8 mm corner radius offers a compromise between edge strength and profile accuracy, suitable for finishing and semi-finishing passes where dimensional control is required. How does the T6215 grade affect performance? The T6215 grade is a CVD-coated carbide designed for wear resistance when turning stainless steels, providing improved tool life and stable cutting behaviour under the stated conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide durability, a 0.8 mm nose radius and a robust 60° triangular geometry for stable and productive stainless steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TNMG110408 T6215 Turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) TNMG110408 T6215 is a triangular ISO turning insert designed for stainless steel turning, offering a CVD-coated carbide grade tailored to stable to mildly interrupted cutting conditions. CVD-coated carbide T6215 for stainless steel Triangular 60° geometry with cylindrical hole 0.8 mm nose radius for balanced edge strength Double-sided chipbreaker for consistent chips Consistent wear resistance for stainless steel turning The TNMG110408 T6215 delivers a wear-resistant solution for demanding stainless steel applications. The CVD-coated surface forms a ceramic diffusion layer over the carbide substrate, which reduces flank wear and increases tool life under steady cutting conditions. This combination leads to fewer tool changes, improved process stability and more predictable machining cycles — a measurable benefit in production environments where uptime and repeatability matter. The grade is optimised for turning rostfreier Stahl and supports efficient chip formation when paired with appropriate feed and cutting speeds. Geometry and seating for repeatable precision The 60° triangular shape provides a favourable balance between cutting edge strength and access to the workpiece, while the cylindrical hole ensures secure, repeatable clamping in compatible holders. The insert’s 0° rake (neutral rake) tends to reduce cutting forces on unstable setups and helps achieve consistent performance. The 0.8 mm nose radius is selected to combine edge robustness with acceptable surface finish, making it suitable for general external and internal turning operations. Compatibility with a holder depends on insert form, relief angle, tolerance class, clamping method, size (11 mm) and thickness (4.76 mm), so matching to the toolholder is essential for optimal results. System readiness and economical indexing Delivered as an ISO indexable insert ready for integration into standard systems, this item complements a matched holder or boring bar together with a shim/clamp set and replacement screw. The double-sided chipbreaker means both faces carry an effective chip management geometry, allowing multiple indexing steps and improved cost-efficiency per insert. In practice this translates to fewer consumable replacements and steady chip control across external and internal turning tasks. Selecting the correct chipbreaker profile and grade for the workpiece material and machine stability will maximise performance and surface quality. For high-reliability stainless steel turning, request the Tungaloy TNMG110408 T6215 insert from Metav Werkzeuge or contact our application specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and holder recommendations Technical Data Article number: 6944837 SKU: 6944837-Tungaloy Manufacturer SKU: TUN6944837 Brand: Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Geometry angle: 60° Relief (rake) angle: 0° Nose radius: 0.8 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Special features CVD-coated carbide grade T6215 Triangular plate form With cylindrical hole for clamping Double-sided chipbreaker ISO-normed turning insert Suitable for stainless steel turning Indexable, ready for holder integration FAQ Is this insert suitable for machining stainless steel? Yes. The T6215 CVD-coated carbide grade is designed for stainless steel turning under stable to mildly interrupted conditions and provides improved wear resistance and chip control. Can the insert be used for interrupted cuts? The grade is intended primarily for stable to lightly interrupted cuts; for heavy interruptions, a tougher geometry or different grade is recommended to preserve edge life. What determines compatibility with a toolholder? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size (11 mm) and thickness (4.76 mm); ensure the holder matches these parameters for secure seating. How does the double-sided chipbreaker affect life and costs? A double-sided chipbreaker permits indexing of multiple usable sides, increasing the number of cutting edges available per insert and improving cost-efficiency in production. Is this insert suitable for both external and internal turning? Yes. The triangular geometry and neutral rake make it suitable for both external and internal turning when paired with the correct holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T6215 and a 60° triangular geometry delivers reliable wear resistance and consistent surface quality for turning applications; the 0.8 mm corner radius supports fine finishing. Order the TNMG110408 T6215 indexable insert directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG 110408 T6215 TNMG indexable turning insert by Tungaloy — CVD-coated carbide, 60° triangular TNMG110408 T6215 is an ISO-design triangular indexable insert engineered for precision external and internal turning, particularly where machining of rostfreier Stahl is required. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning 60° triangular geometry for versatile cutting 0.8 mm corner radius for precision finishing Double-sided chipbreaker with cylindrical hole Longer tool life through premium CVD coating and stable cutting The CVD-coated T6215 grade is formulated to resist abrasive wear when machining rostfreier Stahl, offering a clear advantage in cycle time and tool-change intervals. By combining a wear-resistant Hartmetall substrate with a protective coating, this insert sustains cutting-edge integrity under stable to slightly interrupted cuts. The result is a measurable improvement in productivity and a reduction in unplanned downtime thanks to extended tool life and predictable performance. Predictable fit and secure clamping for ISO tooling systems As part of the ISO series, the geometry and dimensions follow standardised specifications so compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness. The insert’s cylindrical hole and corresponding mounting features allow secure clamping in both external holders and boring bars, ensuring repeatable seated position and concentricity. This predictability simplifies tool changeovers and reduces set-up time on the shop floor. Improved chip control and surface finish for demanding turning tasks The double-sided chipbreaker is optimised for stable cutting regimes and gives effective chip control when turning rostfreier Stahl, which in turn protects the workpiece surface and the cutting edge. A 60° triangular shape provides three cutting edges per side, balancing economy and accessibility for finishing and semi-finishing passes. The 0.8 mm corner radius supports accurate contouring and leaves a fine surface quality without excessive cutting forces. System-ready solution for production-focused shops The insert integrates into a complete machining system composed of an ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws. Such a modular approach enables straightforward stocking and quick replacement while maintaining process stability. Tungaloy’s focus on application-oriented grades and consistent manufacturing supports reproducible results in batch production and bespoke components alike. For machining tasks that prioritise wear resistance and consistent surface quality on rostfreier Stahl, contact Metav Werkzeuge for tailored advice and prompt supply of the Tungaloy TNMG110408 T6215 inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6966259 Manufacturer SKU: TUN6966259 SKU: 6966259-Tungaloy ISO designation: TNMG110408 Model series: ISO-Drehwendeschneidplatten Core data Material: Hartmetall Coating / grade: T6215 (CVD-coated) Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included hole: with cylindrical hole Geometry angle: 60° Special features Triangular plate form, double-sided Suitable for external and internal turning Optimised for rostfreier Stahl under stable to slightly interrupted cutting System requires suitable holder, shim/clamp set and screws ISO-standardised insert for predictable compatibility FAQ What materials is this insert suitable for? The TNMG110408 T6215 insert is optimised for machining rostfreier Stahl; the T6215 grade and CVD-coated Hartmetall make it suitable for demanding stainless-steel turning under stable conditions. How does the chipbreaker affect performance? The double-sided chipbreaker on this Tungaloy insert improves chip control and reduces the risk of built-up edge, which enhances surface finish and protects the cutting edge during turning operations. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the TNMG110408 fits ISO-standard triangular holders and boring bars that accept 11 mm triangular inserts with a cylindrical hole. Can this insert be used for finishing passes? Yes — the 0.8 mm corner radius and the 60° geometry are well suited to finishing and semi-finishing, delivering a balance between edge strength and fine surface quality. What is the manufacturer's article number for ordering? Order using article number 6966259 or manufacturer SKU TUN6966259 for the Tungaloy TNMG110408 T6215 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T6215 Wendeplatten - Tungaloy
High wear resistance and stable chip formation make this insert a reliable choice for stainless steel turning; the CVD-coated carbide T6215 grade extends cutting life while the double-sided chipbreaker supports consistent chip control. Order genuine parts via Metav Werkzeuge or consult the team for application guidance. TNMG 110408 T6215 indexable turning insert for Turning — Tungaloy, CVD-coated carbide, 0.8 mm radius A TNMG 110408 T6215 indexable turning insert engineered for external and internal turning applications, optimised for stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide for wear resistance Triangular 60° geometry with 0.8 mm radius Double-sided chipbreaker, cylindrical hole for clamping Consistent cutting performance for stainless steel turning The combination of CVD coating and a wear-resistant carbide substrate in grade T6215 delivers improved edge life and predictable performance when machining stainless steels. In stable cutting conditions the insert maintains a steady cutting edge and supports a consistent surface finish, reducing rework and process variation. The hardened coating reduces flank wear and helps to maintain component tolerances over longer tool life, contributing to measurable increases in machining uptime. Secure seating, standard compatibility and geometry benefits Supplied in the ISO format with designation TNMG110408, the triangular insert presents a 60° main angle, 0.8 mm corner radius and a plate thickness of 4.76 mm, with a cylindrical central hole for reliable clamping. Compatibility with a toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures repeatable positioning and stable cutting forces. The 0° relief enables specific clearance behaviour and should be considered when selecting the mating holder to preserve the intended cutting geometry. Chip control and productivity advantages A double-sided chipbreaker is integrated to manage chip flow and breakage for a wider range of feeds and depths of cut, improving workplace safety and reducing manual chip handling. The reversible design allows indexing to fresh edges, extending the usable life per insert and lowering consumable costs. Together, the geometry and chipbreaker support efficient metal removal and help to reduce downtime for insert changes, delivering a dependable productivity gain in series turning operations. For machining operations that demand reliable wear resistance and predictable chip control, request genuine Tungaloy TNMG110408 T6215 inserts from Metav Werkzeuge—contact info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and supply options Technical Data Article number: 6966226-Tungaloy Manufacturer SKU: TUN6966226 Model series: ISO turning indexable inserts Type designation: TNMG110408 Grade: T6215 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 11 Main angle: 60° Relief angle: 0° Special features Material: carbide (CVD-coated) Application: Turning Chipbreaker: double-sided Plate shape: triangular Hole: with hole, cylindrical hole Compatibility: ISO-format insert for matching TNMG holders FAQ What materials is this insert intended for? The TNMG110408 T6215 insert from Tungaloy is formulated for machining stainless steels, offering wear resistance under stable to slightly interrupted cutting conditions. Which geometry and dimensions does the insert have? The insert is triangular with a 60° main angle, 0.8 mm corner radius and a plate thickness of 4.76 mm; it is supplied in ISO designation TNMG110408. How is the insert secured in the holder? The insert has a cylindrical central hole for secure clamping; compatibility with the holder depends on form, relief angle, tolerance class, fastening, size and thickness. Is the insert indexable and what does double-sided mean? This is an indexable insert with a double-sided chipbreaker, allowing rotation to fresh edges to extend the usable life before replacement. What advantages does the T6215 grade provide? Grade T6215 combines a wear-resistant carbide substrate with a CVD coating to improve tool life and maintain cutting-edge stability when turning stainless steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide in grade T9215 and a 0.8 mm corner radius delivers durable performance and reliable chip control for medium-steel turning; order the TNMG110408 T9215 insert directly via Metav Werkzeuge or consult our specialists for application support. TNMG110408 T9215 ISO triangular turning insert, CVD-coated carbide by Tungaloy TNMG110408 T9215 is an ISO-format triangular indexable insert engineered for medium-steel turning, offering a balance of wear resistance and toughness for continuous to slightly interrupted cuts CVD-coated carbide for high wear resistance Optimised double-sided chipbreaker ISO TNMG geometry, 60° cutting angle Compatible with standard TNMG holders Greater productivity through a robust CVD coating and tailored geometry The grade features CVD-coated carbide, a coating technology that increases surface hardness and reduces abrasive wear while maintaining a tough substrate for resistance to chipping. With a 0.8 mm corner radius and a 60° triangle geometry, the insert provides predictable cutting behaviour that supports higher metal removal rates on medium steels. These characteristics translate into longer tool life and fewer indexings, which improves process throughput and reduces downtime in production environments. Consistent chip control and secure mounting for stable turning Equipped with a double-sided chipbreaker and a cylindrical hole for positive location, the insert ensures reliable chip formation and evacuation under the typical conditions encountered in turning operations. Secure clamping and the standardised ISO form contribute to repeatable seat location and minimise vibration. Choosing the appropriate chipbreaker and grade according to workpiece material and machining stability results in superior surface finish and reduced risk of edge failure. Practical dimensions that simplify tool management The insert’s key dimensions—4.76 mm thickness, 11 mm inscribed circle, and triangular form—align with common TNMG holder systems to ease inventory and tool preparation. The combination of standard ISO sizing and a central hole makes integration with existing holders, shims and clamping sets straightforward. Predictable indexability and standardised geometry reduce setup time and support efficient tool-change routines on CNC lathes. Process reliability and efficient economy of use Designed for turning of medium steels in continuous to slightly interrupted cuts, the grade offers a compromise between wear resistance and fracture toughness that supports stable cutting parameters and consistent part quality. Applying this insert in a matched holder and optimised cutting data reduces cost per part through extended edge life and fewer tool changes. The systematic ISO design supports flexible deployment across a range of turning tasks, from roughing to semi-finishing. For tailored advice on integrating the TNMG110408 T9215 insert into production, contact Metav Werkzeuge for application recommendations and ordering; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772316 Manufacturer SKU: TUN6772316 Marketplace SKU: 6772316-Tungaloy ISO designation: 110408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed circle: 11 mm Cutting angle: 60° Special features Material: carbide Coating: CVD-coated carbide Grade: T9215 Chipbreaker: double-sided Plate form: triangular Hole: with cylindrical hole Series: ISO turning indexable inserts Application: Turning FAQ What materials is this insert intended for? This insert in grade T9215 is intended primarily for medium-steel turning and is designed to offer a balance of wear resistance and toughness for those applications. Is the TNMG110408 compatible with standard TNMG holders? Yes, the TNMG110408 follows ISO geometry and is compatible with standard TNMG external holders provided the holder matches form, clearance angle, tolerance class, clamping and thickness. How does the CVD coating benefit performance? The CVD-coated carbide on the TNMG110408 T9215 improves surface hardness and abrasion resistance, which extends edge life and supports higher productivity on continuous to slightly interrupted cuts. Can the insert be indexed on both sides? The insert features a double-sided chipbreaker and triangular shape, allowing indexing to fresh cutting edges and helping to extend overall tool utilisation. What is the correct way to specify this item when ordering? Specify the ISO designation and grade, for example TNMG110408 T9215, and reference SKU 6772316-Tungaloy or manufacturer SKU TUN6772316 for clarity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for reliable wear resistance and fracture toughness together with the ISO compatibility of the insert series for consistent production. Order genuine parts via Metav Werkzeuge or request application advice from the technical consultants to ensure the correct insert geometry and clamping system for uninterrupted machining. TNMG 110408 T9215 – ISO turning insert for turning by Tungaloy A TNMG110408 T9215 insert designed for ISO-compliant external and internal turning, offering a CVD-coated carbide grade optimised for medium steels. CVD-coated carbide T9215 for medium steels ISO triangular insert TNMG 110408 format Double-sided chipbreaker, hole for secure clamping High wear resistance and fracture toughness Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 is formulated to balance wear resistance and fracture toughness, making it suitable for continuous to light interrupted cuts in medium steel. This combination reduces flank and crater wear under stable cutting conditions, supporting longer tool life and fewer indexings. Compatibility with ISO holders ensures predictable performance across standard tool systems, which helps plan tool-change intervals and maintain production flow. Secure fit, clear geometry and straightforward indexing The triangular insert with an 11 mm inscribed size and 4.76 mm thickness is built for reliable clamping in holders that match the ISO form, tolerance and fastening configuration. The insert features a 0.8 mm corner radius and a 0° clearance geometry with a 60° included angle, plus a cylindrical hole for positive seating. These dimensional specifications support accurate positioning and repeatable cutting lines, simplifying fixture selection and reducing set-up time when replacing worn tips. Application benefits and shop-floor considerations As an indexable solution from the ISO turning insert family, this grade offers high productivity when paired with the correct chipbreaker and stable workholding. The double-sided chipbreaker enables economical use of both edges before indexing, while the CVD coating helps control built-up edge and improves surface finish. For shops uncertain about the best chipbreaker or clamping variant, Metav Werkzeuge can provide machining recommendations to match material, cut type and machine rigidity; practical advice reduces trial time and increases first-pass yield. Discuss application requirements with Metav Werkzeuge to confirm the ideal Tungaloy insert and clamping combination for optimal cycle time and tool life — contact info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6772309 Manufacturer SKU: TUN6772309 SKU: 6772309-Tungaloy Model series: ISO turning inserts Designation: TNMG110408 Facts Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical Special features Material: carbide Coating/grade: T9215, CVD-coated Shape: triangular Chipbreaker: double-sided Application: turning Typical use: external and internal turning; continuous to light interrupted cuts FAQ What materials is this insert intended for? The Tungaloy TNMG110408 T9215 insert is intended primarily for medium steels; the T9215 grade combines wear resistance and toughness for productive steel machining. How does the chipbreaker affect performance? A double-sided chipbreaker provides two usable cutting edges and helps control chip formation during turning, improving surface finish and extending edge life before indexing. Is the insert compatible with standard ISO holders? Yes, the insert belongs to the ISO turning insert series; compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness to the holder specification. What are the key dimensions to check for correct clamping? Check the inscribed circle (11 mm), thickness (4.76 mm), corner radius (0.8 mm), and the presence of a cylindrical hole for correct seating and repeatable positioning. Can this insert handle interrupted cuts? The grade T9215 is suitable for continuous to light interrupted cuts; for heavy interruptions, a different geometry or grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com