TNMG 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of a universal PVD-coated carbide grade that combines a sharp yet stable cutting edge with ISO interchangeability; the result is reliable medium-duty turning of stainless steels and predictable tool life. Order the TNMG160402 AH6225 indexable insert via Metav Werkzeuge or consult our technical team for application-specific selection. TNMG160402 AH6225 TNMG indexable turning insert — PVD-coated carbide, 60° The TNMG160402 AH6225 is an ISO-format triangular indexable insert designed for external and internal turning, optimised for medium machining of stainless steels and variable working conditions PVD-coated carbide for robust cutting Universal grade for stainless steels Double-sided chipbreaker for consistent chips ISO triangular 16 mm configuration Reliable cutting performance for stainless steels The AH6225 grade is a PVD-coated carbide developed as a universal solution for stainless steels, offering a balance between edge sharpness and wear resistance. The coating supports thermal stability and reduces adhesion during intermittent cuts, while the substrate provides mechanical strength for stable machining. As a result, the insert delivers consistent surface quality and predictable flank wear in medium-duty turning applications, reducing process variation and downtime. Consistent chip formation and process stability Equipped with a double-sided chipbreaker, the insert promotes reliable chip control across a range of cutting parameters. The chipbreaker geometry reduces long, stringy chips and helps avoid chip entanglement in both external and internal turning. This leads to improved cycle times and safer machining conditions, particularly when turning slender components or interrupted cuts. The combination of chip management and grade selection contributes directly to higher process stability and lower scrap rates. Straightforward integration into ISO tool systems The insert follows ISO conventions, which simplifies tooling logistics: the triangular 16 mm format and standard attachment features ensure compatibility with a wide range of holders and boring bars. Key dimensions — 4.76 mm thickness, 0.2 mm corner radius and a cylindrical hole for secure clamping — allow predictable seating and repeatable indexing. The 0° clearance angle and the 60° included angle of the triangle align with common holder geometries, making changeover and replacement straightforward in mixed-tool environments. Practical benefits for production and maintenance Using a universal grade like AH6225 reduces the number of different inserts required in the tool crib, simplifying inventory while covering a broad spectrum of stainless steel alloys. The PVD coating improves resistance to built-up edge and thermal softening, which means less frequent tool changes and lower running costs per component. When paired with an appropriate holder and cutting data adapted to material and rigidity, the insert supports steady productivity and reliable surface finish without demanding excessive operator adjustment. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy PVD-coated TNMG inserts into production and for immediate availability information Technical Data Article number: 6966199 SKU: 6966199-Tungaloy Manufacturer SKU: TUN6966199 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Special features Triangular insert shape Double-sided chipbreaker Cylindrical hole for clamping PVD-coated carbide grade AH6225 Suited for turning of stainless steels ISO-format indexable insert FAQ What materials is this insert optimised for? The TNMG160402 AH6225 insert is optimised for machining stainless steels, offering a compromise between edge sharpness and wear resistance for medium turning tasks. How does the double-sided chipbreaker benefit the machining process? The double-sided chipbreaker on this indexable insert promotes controlled chip formation and reduces chip stringing, enhancing process stability during both external and internal turning. Which holders are compatible with the TNMG160402 format? Compatibility is determined by the ISO triangular form, clearance angle and thickness; this ISO-format insert fits standard TNMG-compatible external holders and boring bars when matched by size and clamping design. What are the key dimensions to consider when replacing an insert? Relevant dimensions include 16 mm side size, 4.76 mm thickness, 0.2 mm corner radius and the presence of a cylindrical hole for secure clamping. Is the coating suitable for interrupted cuts and variable conditions? Yes, the PVD coating combined with the AH6225 substrate provides good thermal and mechanical resistance, making the insert suitable for interrupted cuts and changing operational conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and universal applicability for efficient turning of stainless steels; obtain reliable ISO compatibility and consistent part quality. Order the insert directly via Metav Werkzeuge or consult the specialists for tailored holder and process recommendations. TNMG 160402 AH6225 Turning insert (TNMG160402) — 60° triangular indexable insert by Tungaloy TNMG160402 AH6225 is an ISO-compliant triangular indexable insert designed for medium turning operations on stainless steels, offering a balanced mix of edge sharpness and wear resistance for changing machining conditions. PVD-coated carbide grade AH6225 Optimised for stainless steels 60° triangular geometry, 0.2 mm corner radius Double-sided chipbreaker, cylindrical hole Consistent performance with a universal PVD-coated grade The PVD-coated carbide grade AH6225 is formulated as a universal solution for machining stainless steels, combining a sharp cutting edge with sufficient robustness to withstand interrupted cuts and variable feed rates. This balance reduces edge chipping and improves tool life under medium machining parameters, which in turn supports predictable cycle times and fewer tool changes. Selecting a universal grade simplifies inventory while maintaining surface quality on common stainless alloys. Geometry and mounting that suit ISO tool systems A 60° triangular geometry with a 0.2 mm corner radius and 4.76 mm plate thickness provides a stable contact face and good support in compatible toolholders. The insert is supplied with a cylindrical centre hole and a double-sided chipbreaker design, enabling reversible use and twice the effective cutting edges per insert. Compatibility with a holder depends on form, clearance angle, tolerance class, fixing method, size and thickness; matching those parameters ensures secure clamping and repeatable cutting performance in ISO-standardised systems. Process benefits: chip control and surface integrity The double-sided chipbreaker and grade pairing deliver improved chip control and a consistent surface finish during both external and internal turning. For semi-finish to medium finishing passes the combination of edge geometry and chipformer reduces built-up edge tendency on demanding stainless alloys, helping to maintain dimensional accuracy and minimise rework. The indexable format supports rapid edge changes, lowering downtime and increasing effective machine utilisation. Practical handling and economy in daily shop use As a reversible indexable insert, TNMG160402 AH6225 allows economical edge rotation and simple stock keeping. Correct clamping and the use of the appropriate screw and spacer ensure safe operation; inserts with a central hole require the matching screw and seat geometry. The universal grade reduces the need for multiple specialised inserts, supporting a cost-effective tooling strategy while preserving process reliability in varied turning applications. For tailored recommendations on holders, cutting data or to procure TNMG160402 AH6225 inserts, contact Metav Werkzeuge—technical consultants are available to advise on optimal combinations for specific stainless steel grades and machining conditions. Technical data Article number: 6951024 SKU: 6951024-Tungaloy Manufacturer SKU: TUN6951024 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160402 AH6225 Tungaloy-Wendeplatte Material: carbide Grade/coating: AH6225, PVD-coated Numeric specifications Inscribed circle / size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Geometry angle: 60° Clearance angle: 0° Design & special features Triangular indexable plate Double-sided chipbreaker Cylindrical centre hole ISO-compliant turning insert Suited for stainless steels Suitable for external and internal turning FAQ What materials is this insert designed for? The TNMG160402 AH6225 insert is formulated for machining stainless steels; the PVD-coated AH6225 grade provides a compromise between edge sharpness and wear resistance for a broad range of stainless alloys. Can the insert be used on internal contours as well as external profiles? Yes, the triangular indexable design with a 60° geometry and a 0.2 mm corner radius supports both external and internal turning operations when paired with a suitable holder. How many cutting edges are available per insert? The insert is double-sided with a central hole, allowing reversible indexing and effectively providing multiple usable cutting edges before replacement. What should be considered when choosing a compatible toolholder? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and plate thickness; ensuring these parameters match the ISO TNMG160402 profile is essential for secure clamping and repeatable results. Is the coating and grade indicated on the product? Yes, this item is specified as grade AH6225 with a PVD-coated carbide substrate to support machining of stainless steels under medium cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade (AH6225) designed for reliable turning of stainless steels, combined with a 60° triangular form and 0.2 mm nose radius for precise finishes; order directly via Metav Werkzeuge or consult our technical advisors for tailored recommendations. TNMG 160402 AH6225 Tungaloy turning insert — PVD‑coated carbide, 60° triangle A TNMG 160402 AH6225 Tungaloy turning insert engineered for external and internal turning operations, offering a sharp yet stable cutting edge optimised for mid‑range machining of stainless steels. PVD‑coated carbide grade AH6225 Sharp, stable cutting edge for stainless steels 60° triangular geometry, 0.2 mm nose radius Double‑sided chipbreaker with cylindrical hole Consistent performance in stainless‑steel turning The insert is a PVD‑coated carbide grade developed to balance edge sharpness and durability for challenging materials. The coating enhances wear resistance and reduces built‑up edge when machining stainless steels, while the substrate retains toughness for interrupted cuts. This combination results in a more stable process, fewer tool changes and predictable tool life, which supports leaner production and improved net machining time. ISO compatibility and secure mounting for efficient tool changes Designed to the ISO model series for turning insert geometries, the component matches standard holders when form, clearance angle, tolerance class, fastening method, size and thickness align. The triangular 60° form and the cylindrical hole provide straightforward clamping in compatible TNMG toolholders, enabling quick index changes. Clear identification of size and tolerances minimises setup time and ensures repeatable positioning on the toolpost. Practical machining guidance for reliable results For external and internal turning, select a chipbreaker and the AH6225 grade according to material condition and fixturing stability. The double‑sided chipbreaker supports controlled chip formation under variable cutting conditions, reducing the risk of tangling and improving surface finish. When working with slender parts or intermittent cuts, favour conservative feeds and keep cutting parameters within the mid‑range recommended for PVD‑coated carbides to maintain edge integrity and component quality. Coating, grade and operational economy The AH6225 designation denotes a PVD‑coated carbide composition optimised for a wide coverage of stainless‑steel applications and changing conditions. The coating assists in thermal resistance and friction reduction at the cutting zone, which can translate into longer edge life and lower tooling costs per part. By combining an industrially established grade with ISO form standards, this insert supports consistent productivity and easier inventory management across series production. For precision turning with Tungaloy's AH6225 PVD‑coated inserts, contact Metav Werkzeuge for ordering or application advice via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide practical support and fast supply. Technical data Article number: 6947349 Manufacturer SKU: TUN6947349 Model series: ISO‑Drehwendeschneidplatten Designation: TNMG160402 AH6225 Tungaloy‑turning insert Material: carbide Numbers / Core technical data Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.2 mm Relief / clearance angle: 0° Geometry angle: 60° Manufacturer article number: 6947349 Special features / Versions Coating: PVD Grade: AH6225 Chipbreaker: double‑sided Hole: with cylindrical hole Plate form: triangular Typical application: turning (external and internal) Designed for compatibility with ISO TNMG holders FAQ Is this insert suitable for stainless steels? Yes. The TNMG 160402 AH6225 Tungaloy turning insert is a universal grade optimised for stainless‑steel machining, combining a sharp cutting edge with stability for mid‑range conditions. How does the insert mount to a holder? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the TNMG form and cylindrical hole are intended for standard TNMG ISO holders and secure clamping. What does AH6225 indicate? AH6225 denotes a PVD‑coated carbide grade formulated for good wear resistance and reliable chip control under changing conditions, offering a compromise between sharpness and edge life. Which chipbreaker should be chosen for roughing? Select the chipbreaker suited to the material and process stability; the double‑sided chipbreaker on this insert supports controlled chip formation for many stainless‑steel roughing and finishing tasks. How is the designation TNMG160402 interpreted? The ISO designation identifies the insert form and size series; detailed values such as nose radius 0.2 mm, plate thickness 4.76 mm and 60° geometry are provided in the technical data above. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance and stable cutting-edge performance for consistent turning of heat‑resistant alloys; ISO compatibility and compact geometry ensure rapid tool changes and predictable cycle times. Order genuine Tungaloy inserts via Metav Werkzeuge or contact the consultants for application advice. TNMG 160402 AH8015 — TNMG indexable turning insert, PVD‑coated carbide by Tungaloy The TNMG160402 AH8015 is an ISO‑standard triangular indexable turning insert designed for general external and internal turning of heat‑resistant alloys and similar demanding materials. PVD‑coated carbide grade AH8015 60° triangular geometry for stable cuts Double‑sided with cylindrical hole Corner radius 0.2 mm for fine finishing Consistent metal removal with reliable edge life The PVD‑coated carbide grade AH8015 delivers a balanced mix of wear resistance and edge stability, which translates into longer tool life and fewer interruptions in the machining schedule. In applications involving elevated temperatures or tough alloying elements, the coating reduces crater wear while the substrate sustains the cutting edge, enabling steady metal removal rates. This results in measurable productivity gains and more predictable regrinding or index intervals for production runs. Fast tool changes and holder compatibility for efficient workflows Designed to the ISO TNMG form, the triangular geometry and standardised dimensions ensure compatibility with a wide range of external holders and drill‑bar style toolholders. The 60° cutting angle and the central cylindrical hole allow secure clamping and simple indexing, which minimises setup time during tool replacement. For process engineers, this means shorter downtimes and smoother changeovers when switching inserts or adjusting machining parameters. Controlled chip formation and surface quality The insert is supplied with a double‑sided geometry and a specified corner radius of 0.2 mm, giving a balance between cutting strength and surface finish. The combination of the grade and the chip‑breaker design is intended to promote uniform chip formation when turning heat‑resistant alloys, reducing the risk of built‑up edge and enhancing dimensional consistency. As a result, the finished components typically exhibit improved surface integrity and require less downstream finishing. Practical selection and application guidance When selecting the insert, consider the workpiece material and cutting conditions: the PVD‑coated carbide is particularly suited to heat‑resistant alloys and works well under moderate to high cutting speeds. Because this is an ISO‑standard indexable insert, matching the appropriate holder form, relief angle and clamping tolerance is essential for optimal performance. If additional technical data or process recommendations are required, Metav Werkzeuge provides application support to help choose the correct chipbreaker and operating window. Contact Metav Werkzeuge for tailored machining recommendations and availability of genuine Tungaloy TNMG 160402 AH8015 inserts; Metav Werkzeuge’s consultants can advise on holder compatibility and process optimisation Technical data Article number: 6966200 Manufacturer SKU: TUN6966200 SKU: 6966200-Tungaloy Model series: ISO‑Drehwendeschneidplatten Data Insert designation: TNMG160402 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included hole: yes (cylindrical) Cutting angle: 60° Application: Turning Special features Material: carbide (Hartmetall) Coating: PVD, grade AH8015 Geometry: triangular, double‑sided Chipbreaker: double‑sided ISO‑standard form for broad holder compatibility FAQ What materials is this insert suited for? The TNMG 160402 AH8015 insert is formulated for the general turning of heat‑resistant alloys and similar demanding materials, combining a PVD coating with a carbide substrate for enhanced wear resistance. How does the 0.2 mm corner radius affect the result? A 0.2 mm corner radius offers a compromise between edge strength and surface finish; it supports fine finishing passes while maintaining sufficient robustness for routine turning operations. Is the insert reversible and how many cutting edges are available? The triangular, double‑sided design provides multiple usable cutting edges per insert, allowing economical indexing before replacement. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, clamping tolerance and insert thickness; the ISO designation ensures wide compatibility with standard TNMG‑capable external holders. Where can additional technical information be obtained? Technical data sheets and process recommendations are available from Metav Werkzeuge; their consultants can assist with selection of chipbreaker and cutting parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of precise edge control and durable PVD-coated carbide AH8015 combined with a 0.2 mm corner radius and a double-sided chipbreaker for efficient, reproducible turning results — order directly via Metav Werkzeuge or request guidance from our consultants. TNMG160402 AH8015 turning insert by Tungaloy — PVD-coated carbide, 0.2 mm corner radius A TNMG160402 AH8015 indexable insert designed for general turning of heat‑resistant alloys, offering balanced wear resistance and reliable cutting-edge stability for industrial applications ISO triangular insert TNMG geometry PVD-coated carbide grade AH8015 0.2 mm corner radius for fine profiles Double-sided insert with cylindrical hole Increase productivity with predictable tool life The triangular ISO indexable insert is engineered for repeatable performance in industrial turning. With a PVD-coated carbide substrate and the AH8015 grade, the geometry combines wear resistance and edge stability to reduce rework and tool change frequency. The hardened coating lowers adhesive wear at elevated temperatures, which translates into more consistent cycle times. These characteristics help to maintain production flow and reduce downtime in batch and continuous machining. Achieve reliable chip control and surface quality The integrated double-sided chipbreaker provides controlled chip formation for turning tasks, improving evacuation and reducing the risk of built-up edge. The modest 0.2 mm corner radius supports fine profile work and better surface finishes without compromising edge strength. For operators seeking a balance between detail and robustness, this configuration yields stable feed behaviour and a consistent machined surface in demanding materials. Compatibility and mounting explained for safe use Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 4.76 mm thickness and triangular shape require a matching external holder or boring bar with the correct seating and clamping kit. The presence of a cylindrical hole ensures secure fastening using the appropriate screw and shim set. Checking these parameters before installation prevents misalignment and supports repeatable, safe tool changes. Material focus and recommended applications The AH8015 grade is optimised as a first choice for general machining of heat‑resistant alloys, offering a compromise between hardness and toughness for prolonged cutting under elevated temperatures. This insert is intended specifically for turning, covering both external and internal operations when paired with the correct holder. Selecting the right chipbreaker and grade for the workpiece material and machining stability ensures effective removal rates and reduces the likelihood of thermal damage. System integration and workshop guidance An ISO insert system typically comprises the indexable insert, a compatible toolholder or boring bar, a support shim or clamping set, and the correct replacement screws. Proper selection and assembly, together with the AH8015 cutting grade, enable consistent results across a range of setups. For tailored recommendations on holder compatibility, feeds and speeds for specific alloys, the supplier can provide machining tables and practical advice to integrate the insert into an existing process. Contact Metav Werkzeuge for application-specific recommendations and to order TNMG160402 AH8015 inserts from stock — expert advice and fast dispatch are available Technical Data Article number: 6914358 SKU: 6914358-Tungaloy Manufacturer SKU: TUN6914358 Model series: ISO indexable turning inserts Material: Carbide (Hartmetall) Grade: AH8015 Facts ISO code: 160402 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Geometry angle: 60° Special features PVD coating Double-sided chipbreaker Triangular insert shape Cylindrical hole for fastening Application: Turning (external and internal) System components: holder, shim/clamping set, screws FAQ What materials is this insert optimised for? The TNMG160402 AH8015 insert is optimised for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for demanding turning operations. Is the insert reversible and what does double‑sided mean? Yes — the triangular TNMG design with a double‑sided chipbreaker provides multiple indexed cutting edges, allowing rotation to a fresh edge and economical use of the insert. How is compatibility with toolholders determined? Compatibility is defined by insert form, relief angle, tolerance class, fastening type, size and thickness; check that the holder accepts ISO 160402 geometry and 4.76 mm thickness for correct seating. Does the insert have a coating and what benefit does it offer? The insert features a PVD-coated carbide construction; the coating improves wear resistance at higher temperatures and supports longer tool life in continuous turning. What accessories are required for mounting and use? A matching external holder or boring bar, the correct shim/clamping set and replacement screws are required to secure the insert and ensure repeatable clamping and alignment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 grade, a 0.2 mm corner radius and secure ISO compatibility for consistent turning performance; order the TNMG160402 inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160402 AH8015 Tungaloy indexable turning insert – PVD-coated carbide, 60° The TNMG160402 AH8015 is an ISO-standard triangular indexable insert developed for external and internal turning, combining a balanced PVD-coated carbide grade with a double-sided chipbreaker for dependable chip control. TNMG 160402 AH8015 PVD-coated carbide Triangular ISO insert, 60° cutting angle Double-sided chipbreaker, cylindrical hole 0.2 mm corner radius, 4.76 mm thickness Consistent cutting performance for heat-resistant alloys The insert delivers a stable compromise between wear resistance and edge stability thanks to the AH8015 PVD-coated carbide grade. This balance makes the component particularly suitable for machining heat-resistant alloys, where thermal and mechanical loads are high. The triangular geometry with a 60° cutting angle and a 0.2 mm corner radius supports precise engagement and predictable cutting forces, which contributes to improved tool life and repeatable part quality. The ISO conformity simplifies selection of matching holders and reduces setup variability. Higher productivity through reliable chip control and economy A double-sided design reduces cost per usable edge and increases uptime before index changes are required. The integrated chipbreaker is engineered to produce short, controlled chips when the insert is used under stable cutting conditions, enhancing process reliability and reducing the risk of built-up edge. The cylindrical hole and standard clamping interfaces ensure secure clamping in ISO holders, promoting consistent machining performance and minimising vibration-related wear, which in turn supports higher material removal rates and improved throughput. Easy integration into existing tool systems and application guidance The insert is intended for system use with a matching ISO turning holder, shim and fastening hardware; compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness. Selection of the correct chipbreaker and grade should follow the workpiece material and machining stability to unlock the full benefit of the PVD coating and substrate. If uncertainty exists about holder matching or application parameters, technical consultation is recommended to ensure optimal clamping and cutting conditions for stable production. Clear material suitability and user-oriented advantages This indexable cutting solution is optimised for general turning tasks and specifically chosen for challenging, heat-resistant workpiece materials. The PVD-coated carbide substrate provides enhanced resistance to abrasion and edge degradation, while the geometry and 0.2 mm corner radius deliver the dimensional control required for many finishing and semi-finishing operations. Together, these characteristics reduce process variability and support consistent surface quality without sacrificing edge life. For specialised advice on applying Tungaloy TNMG160402 AH8015 inserts in specific turning operations or to request a quotation, contact Metav Werkzeuge for tailored recommendations – info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6951025 Manufacturer SKU: TUN6951025 SKU: 6951025-Tungaloy Facts ISO designation: 160402 Cutting angle: 60° Corner radius: 0.2 mm Thickness: 4.76 mm Size: 16 mm Special features Material: PVD-coated carbide (AH8015) Shape: triangular Chipbreaker: double-sided Hole: cylindrical Application: turning (external and internal) System: ISO-standard indexable insert FAQ What materials is this insert best suited for? The TNMG160402 AH8015 insert is primarily designed for heat-resistant alloys, offering a balance of wear resistance and edge stability through its PVD-coated carbide grade. Which toolholders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; select an ISO-standard turning holder that matches the TNMG160402 dimensions and clamping style. How many cutting edges are available per insert? The triangular, double-sided design provides multiple indexable edges; the geometry yields six usable cutting corners when both sides are used sequentially. What are the key geometry values to consider for setup? Important parameters are the 60° cutting angle, 0.2 mm corner radius and 4.76 mm thickness, which influence engagement, feed recommendations and finish quality. How does the chipbreaker affect machining? The double-sided chipbreaker promotes short, controlled chips under appropriate cutting conditions, improving process reliability and reducing the risk of chip entanglement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of AT9530 cermet coating, reliable ISO compatibility and a fine corner radius 0.2 mm for consistent surface quality and predictable tool life; order the insert directly via Metav Werkzeuge or ask their consultants for holder compatibility. TNMG 160402 AT9530 TNMG turning insert — finishing cermet by Tungaloy The TNMG160402 AT9530 is an ISO-standard triangular turning insert designed for fine and light finishing of steel components, offering a coated cermet grade optimised for surface quality and even wear. ISO-standard TNMG form for broad compatibility Coated cermet grade AT9530 for fine finishing Double-sided chipbreaker for consistent chip control 0.2 mm corner radius for improved surface quality Achieve consistent surface quality with a cermet finishing grade The combination of a coated cermet substrate and the AT9530 grade focuses on delivering a consistently high surface finish during finish and light machining of steel. Cermet inserts excel where minimal built-up edge and stable flank wear are critical; the result is fewer rework cycles and predictable component dimensional stability. With a defined corner radius 0.2 mm, the geometry reduces vibratory marks on the workpiece, which directly benefits batch-to-batch reproducibility and reduces downstream finishing. Clear guidance on mechanical compatibility and mounting Compatibility depends on ISO form, relief angle, tolerance class, fastening method, size and thickness; the insert follows the ISO designation and is manufactured to fit holders designed for the TNMG 160402 family. The triangular shape combined with a 60° included angle means many standard external and internal turning holders can be used, provided the pocket accepts the 4.76 mm plate thickness and the cylindrical hole fixing. This commonality simplifies inventory management and reduces the need for bespoke toolholders in mixed-production environments. Design details that improve process stability The insert is manufactured from cemented carbide and features a double-sided chipbreaker for reproducible chip formation in finishing operations. The reversible geometry allows indexation to a fresh edge without changing insert type, supporting uninterrupted production. A 0° clearance angle specification suits holders that provide the necessary relief; this, together with the moderate corner radius and the AT9530 coating, helps maintain a stable cutting edge and even wear distribution, extending the number of usable cycles per insert. Practical selection advice for shop-floor application For turning tasks that prioritise dimensional accuracy and surface quality rather than heavy stock removal, this grade and geometry are suitable choices. Select a matching chipbreaker and the appropriate insert thickness and seat geometry to ensure secure clamping and heat dissipation. When replacing inserts, confirm that the holder’s seating face and clamp align with the ISO TNMG 160402 specification to avoid run-out or premature wear; correct mechanical fit is as important as material and coating choices for repeatable performance. Contact Metav Werkzeuge for an application check or to request the TNMG 160402 AT9530 insert; technical consultants at Metav Werkzeuge can confirm holder compatibility and supply options — info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6762986 Manufacturer SKU: TUN6762986 Label: TNMG160402 AT9530 Tungaloy-Wendeplatte Facts Angle: 60° Corner radius: 0.2 mm Thickness: 4.76 mm Size: 16 mm Free angle: 0° Special features Coating: AT9530 Material: cemented carbide Shape: triangular Chipbreaker: double-sided Hole style: cylindrical hole Application: turning Typical use: finishing and light machining of steel FAQ What applications suit this insert best? The TNMG160402 AT9530 Tungaloy insert is intended for external and internal turning operations, specifically for finishing and light machining of steel where surface quality and even wear are priorities. How is holder compatibility determined for this TNMG insert? Compatibility requires a matching ISO TNMG pocket with the correct relief angle, tolerance class, fastening method, size (16 mm) and plate thickness (4.76 mm); ensure the holder accepts the triangular form and cylindrical hole design. Does the AT9530 grade improve surface finish compared with standard carbide? Yes — AT9530 is a cermet-based coating designed to reduce built-up edge and promote a finer surface finish and uniform flank wear on steel during finishing cuts. What role does the double-sided chipbreaker play in process stability? The double-sided chipbreaker on this insert provides consistent chip formation and easier indexation, supporting stable cutting conditions during finishing and reducing the need for frequent chip-control adjustments. Is this insert reversible and how does that affect tool life? The triangular geometry with a double-sided chipbreaker allows the insert to be indexed to fresh cutting edges, which increases the number of usable edges per insert and supports longer productive runs without changing insert type. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 cermet grade, a precise 0.2 mm corner radius and ISO conformity for consistent finishing results; order the inserts or contact Metav Werkzeuge for advice on holder compatibility and process optimisation. TNMG160402 GT9530 TNMG 160402 GT9530 — Tungaloy indexable turning insert, coated cermet, 0.2 mm radius The TNMG160402 GT9530 is an ISO-standard triangular indexable insert designed for turning applications, offering a wear-resistant coated cermet grade that excels in finishing and light universal steel machining. Coated cermet grade GT9530 for finishing ISO TNMG 160402 triangular insert 0.2 mm corner radius for fine finishes Improved surface finish and longer tool life with coated cermet The coated cermet grade GT9530 combines hardness and thermal stability to deliver a consistent finish on steel components under stable machining conditions. The fine 0.2 mm corner radius reduces edge breakage and supports repeatable surface quality on external and internal turning operations. Cermet grades are optimised for light to finishing cuts: they resist adhesive wear better than uncoated carbides and can extend tool life where process stability allows, leading to fewer tool changes and lower downtime. ISO compatibility and secure clamping for predictable machining Designed to the ISO TNMG specification, this triangular insert fits holders that match the plate form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole, a double-sided chipbreaker and a 4.76 mm plate thickness, enabling two usable cutting edges per side and straightforward indexing. This standardisation simplifies stock management and reduces setup variability, so fixtures and holders deliver reliable repeatability across batches. Practical guidance for selecting chipbreakers and process parameters For optimal results when turning steel, select the double-sided chipbreaker and a suitable cutting geometry that match workpiece rigidity and machining strategy. Use lighter depths of cut and finishing feeds with this grade to exploit its surface-capability; secure tooling and a compatible holder minimise vibration and support the grade’s advantage in finish. The system approach — insert, holder, underlay/clamping set and replacement screws — ensures secure clamping and straightforward maintenance, which helps maintain productivity and reduces scrap rates. Discuss the Tungaloy GT9530 turning inserts with Metav Werkzeuge to ensure the correct holder match and cutting strategy — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998096 Manufacturer SKU: TUN6998096 Model series: ISO-Drehwendeschneidplatten Application: Turning Manufacturer: Tungaloy Facts Shape: triangular Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Grade/coating: GT9530 (coated cermet) Chipbreaker: double-sided Carbide substrate ISO TNMG160402 designation Use case: finishing to light universal turning in steel FAQ What materials is this insert suitable for? The TNMG160402 GT9530 insert is intended primarily for steel machining; the GT9530 coated cermet excels in finishing and light universal operations on steel when machining conditions are stable. Is the insert reversible or indexable on both sides? Yes, the triangular design with a double-sided chipbreaker provides multiple indexable cutting edges; the plate thickness and cylindrical hole support secure clamping and reliable indexing. How does the 0.2 mm corner radius affect cutting performance? The 0.2 mm corner radius yields a finer cutting edge that improves surface finish and reduces the risk of edge chipping during finishing passes, making it suitable for components requiring good surface quality. Which holder features must be checked for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; verify that the external holder or boring bar matches the ISO TNMG160402 geometry and clamping style. Can this insert be used for roughing operations? The GT9530 is a wear-resistant finishing to light universal grade optimised for stable conditions; for heavy roughing, consider grades and chipbreakers designed for higher feed and depth of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet grade and the TNMG160402 geometry for predictable finishing performance and low cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160402 NS9530 Tungaloy Turning Insert — uncoated cermet, 0° clearance TNMG160402 NS9530 Tungaloy turning insert for ISO-standard external and internal turning, optimised for finishing steel components ISO triangular TNMG 160402 format Uncoated cermet grade NS9530 for finishing Sharp cutting edge with low cutting forces Double-sided chipbreaker, cylindrical hole High-quality finishing with reduced cutting forces The NS9530 grade is an uncoated cermet designed specifically as a finishing grade for steel, delivering a consistently improved surface finish with lower cutting loads. The combination of a sharp cutting edge and the small 0.2 mm corner radius helps to produce fine surfaces on continuous cuts and small depths of cut, reducing the need for secondary finishing. The material choice and geometry favour precision operations, resulting in predictable tool life and fewer interruptions in a production cycle. Reliable ISO compatibility for easy integration Built to the ISO profile, this triangular insert matches common clamping and holder systems when the form, clearance angle, tolerance class, fastening, size and thickness correspond. The neutral 0° clearance and the 60° included angle are important positioning parameters that define tool contact and chip flow; the ISO designation simplifies procurement and inventory management for workshops running standard tooling systems. Guidance on holder compatibility facilitates fast integration into existing setups without trial-and-error adjustments. Practical design for cost-effective turning The insert is manufactured on a carbide substrate with a double-sided chipbreaker and a cylindrical hole, enabling multiple indexing positions and stable clamping. The 4.76 mm thickness and 16 mm inscribed circle combine stiffness with accessibility in tight bores. For turning operations where continuous cuts and fine feedrates are predominant, this geometry reduces cutting forces and helps maintain dimensional accuracy. Selecting the correct chipbreaker and the NS9530 grade tailors performance to workpiece stability and desired surface quality. For supply and technical recommendations on Tungaloy TNMG inserts, contact Metav Werkzeuge for personalised assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966201 Manufacturer SKU: TUN6966201 SKU: 6966201-Tungaloy Model series: ISO turning inserts Numbers / core technical data Corner radius: 0.2 mm Plate thickness: 4.76 mm Inscribed circle (size): 16 mm Included angle: 60° Clearance angle: 0° Special features / versions Shape: triangular Hole: with hole (cylindrical) Chipbreaker: double-sided Grade: NS9530 Cutting material type: uncoated cermet Material: carbide Application: turning FAQ Which workpiece materials is this insert best suited for? The NS9530-grade insert is optimised for finishing steel; the TNMG160402 geometry performs well on continuous cuts and small depths of cut to achieve high surface quality. How does the 0.2 mm corner radius affect the result? A 0.2 mm corner radius delivers a fine surface and reduced cutting vibration for finishing operations, while limiting the insert’s suitability for heavy interrupted cuts. Can the insert be indexed to use multiple edges? Yes. The double-sided chipbreaker and triangular form allow multiple indexing positions, supporting cost-effective edge changes and stable clamping during turning. What holder factors determine compatibility with this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; these parameters ensure correct seating and secure clamping for the TNMG160402 geometry. When should the NS9530 grade be chosen over other grades? Select NS9530 for finishing applications where a sharp cutting edge, low cutting forces and excellent surface finish on steel are priorities; different grades or chipbreakers should be chosen for roughing, alloys or unstable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of high surface finish, low cutting forces and reliable ISO compatibility for consistent finishing on steel components. Order the inserts directly via Metav Werkzeuge or consult our technical advisors for process-specific recommendations. TNMG 160402 NS9530 Tungaloy turning insert — uncoated cermet, 0.2 mm radius The TNMG160402 NS9530 is an ISO turning insert designed for external and internal turning, offering a finishing cermet grade for steels with a sharp cutting edge and low cutting forces. Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Double-sided chipbreaker for economy Superior finishing performance for steel components The TNMG160402 NS9530 insert is tailored for finishing operations on steel, combining a cermet cutting material with a finely profiled edge to reduce cutting forces and improve surface quality. The uncoated NS9530 grade delivers a sharp cutting edge that supports continuous cuts and small depths of cut, which helps to produce a superior surface finish while maintaining dimensional stability. For customers seeking consistent cosmetic quality and reduced secondary processing, this geometry and grade offer a reliable trade-off between tool life and final part appearance. ISO compatibility for straightforward integration As an ISO-standard triangular insert, the part simplifies tool inventory and holder selection. Compatibility to a toolholder is governed by form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters ensures secure clamping and consistent repeatability. The insert’s triangular shape, 60° included angle and cylindrical hole facilitate secure mounting in many common turning holders and boring bars, allowing shops to adopt the insert without special adaptations. Using an ISO-format insert also supports efficient changeover and predictable setup times in production. Production efficiency and operational benefits A small 0.2 mm nose radius and the double-sided chipbreaker make the insert economical per cutting edge while maintaining the required finish for precision components. The 4.76 mm plate thickness and carbide substrate provide mechanical stability, reducing vibration in light finishing cuts and helping to maintain consistent tool life under the recommended conditions. For operations where reduced cutting forces are essential to protect thin-walled or delicate parts, the combination of geometry and the NS9530 cermet grade reduces the risk of workpiece distortion and contributes to higher first-pass yield. For material-specific guidance or to procure TNMG 160402 NS9530 inserts from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Article number: 6951027 Manufacturer SKU: TUN6951027 Our SKU: 6951027-Tungaloy Manufacturer: Tungaloy Dimensions & measurable data Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Materials & features Substrate: carbide Grade: NS9530 (uncoated cermet) Plate shape: triangular Chipbreaker: double-sided Application: turning (external and internal) Series: ISO turning insert series FAQ What materials is this insert suitable for? The TNMG160402 NS9530 insert is optimised for steel and is a finishing grade designed to deliver low cutting forces and high surface quality in continuous cutting conditions. Is the insert coated or uncoated? This insert uses an uncoated cermet grade (NS9530), which provides a sharp, wear-resistant cutting edge for finishing applications. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the insert’s ISO format and cylindrical hole allow use in many standard triangular insert holders and boring bars. What cutting characteristics can be expected with the 0.2 mm nose radius? A 0.2 mm radius supports fine finishing at small depths of cut, producing superior surface finishes while limiting cutting forces—suitable for delicate or thin-walled components. How does the double-sided chipbreaker affect economy? The double-sided chipbreaker doubles the number of usable edges per insert, improving cost efficiency while maintaining reliable chip control in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise surface finish, low cutting forces and ISO compatibility for reliable, efficient turning operations; order the TNMG160402 NS9530 insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG 160402 NS9530 — Turning indexable insert, uncoated cermet, Tungaloy TNMG 160402 NS9530 is an ISO‑standard triangular turning insert designed for fine finishing of steel components in continuous turning operations Cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO triangular form, 16 mm size Cylindrical hole for secure clamping High-precision finishing with reduced cutting forces The NS9530 uncoated cermet grade is engineered for finishing cuts, delivering a consistently high surface quality thanks to its sharp cutting geometry and stable edge. In continuous turning the material combination reduces cutting forces, which lowers chatter risk and supports tighter dimensional control; this results in fewer re‑operations and a smoother production flow. The insert’s geometry is optimised to produce fine finishes at small depths of cut, making it well suited for parts where surface integrity is critical. The result is efficient, repeatable performance in series machining. ISO compatibility and secure clamping for predictable setups Supplied in the ISO TNMG160402 format, the triangular insert follows standard dimensions so it integrates reliably with compatible holders. Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; matching these parameters ensures correct seating and repeatable tool tip position. The insert features a cylindrical hole and is clamped via a suitable holder, shim and clamp set so that axial and radial clearance are maintained. System components such as an external holder, support pad and replacement screws are part of the recommended setup for stable, repeatable turning. Durable edge control and process reliability for finishing cuts The double‑sided chipbreaker and a fine 0.2 mm corner radius deliver controlled chip formation and edge strength during finishing passes. With a plate thickness of 4.76 mm and a 60° included angle, the insert provides a balance between rigidity and accessibility in external and internal turning tasks. The TNMG160402 NS9530 insert is particularly effective for continuous cutting of steel where a sharp edge reduces mechanical load and helps maintain dimensional accuracy over multiple indexing cycles. The robust cermet composition promotes longer edge life under finishing conditions, contributing to consistent quality across batches. For precision turning using Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997701 SKU: 6997701-Tungaloy Manufacturer SKU: TUN6997701 Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 60° Hole: with cylindrical hole Double-sided chipbreaker Special features Material: carbide (cermet) Grade/coating: NS9530, uncoated Plate form: triangular Typical application: turning (finishing) Suitable for: continuous cutting and small depths of cut System components: compatible holder, support pad/shim, clamp set, replacement screws FAQ What materials is the TNMG160402 NS9530 insert suitable for? The TNMG160402 NS9530 insert is specified as a finishing grade for steel and performs best in continuous turning where a sharp edge and low cutting forces are required. How should the TNMG160402 NS9530 be clamped in the toolholder? The insert is clamped using a matched external holder with a support pad or shim and the appropriate clamp set; the cylindrical hole provides secure seating when the holder matches the ISO form and tolerance. What benefits does the NS9530 cermet grade offer in finishing operations? NS9530 cermet provides a sharp cutting edge and stable edge retention for high surface quality, reduced cutting forces and consistent finishes during small‑depth, continuous cuts. Is the TNMG160402 NS9530 reversible or single‑use? The insert is double‑sided; after indexing the opposite edge can be used, which extends productive tool life under finishing conditions. What is the corner radius and how does it affect the machining result? The corner radius is 0.2 mm, which helps achieve fine surface finishes while maintaining adequate edge strength for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 NS9530 Wendeplatten - Tungaloy
Take advantage of the ISO format and the sharp-cutting, uncoated NS9530 cermet grade to achieve consistent finishing on steel parts; the triangular TNMG form with a 0.2 mm corner radius and 60° included angle delivers low cutting forces and excellent surface quality. Order the TNMG160402 NS9530 Tungaloy indexable insert directly via Metav Werkzeuge or consult the technical team for specification support. TNMG160402 NS9530 Tungaloy indexable insert — finishing grade for turning A TNMG160402 NS9530 indexable insert designed for finishing turning of steel, offering a sharp cutting edge and stable performance in continuous cuts with small depths of cut ISO triangular insert, 60° included angle Uncoated cermet grade NS9530 Finishing grade with low cutting forces Double-sided chipbreaker, cylindrical hole Consistent finishing performance and why the grade matters The combination of an uncoated cermet cutting material and the NS9530 grade provides a cutting geometry optimised for finishing operations on steel. Cermet substrates combine ceramic hardness with metallic toughness, resulting in a sharp cutting edge that maintains form under low to moderate loads; this leads to low cutting forces and a high surface finish without aggressive cutting parameters. For continuous cuts and small depths of cut, the result is more predictable dimensional control and reduced need for downstream polishing. The construction as an indexable insert in ISO format ensures predictable repeatability and easier tool management on the shop floor. Secure clamping and dimensional reliability for uninterrupted production Compatibility with holders is determined by shape, relief angle, tolerance class, fastening, size and thickness; the TNMG geometry and the 60° included angle allow straightforward integration into standard turning toolholders. The triangular plate with a 0.2 mm corner radius and a 4.76 mm thickness gives clear profiling for fine finishing passes, while the cylindrical hole provides reliable axial location and clamping stability. The double-sided chipbreaker extends usable edge life by allowing the insert to be indexed once an edge is worn, supporting continuous production cycles and reducing downtime for tool changes. Productivity gains through quality and predictable tool life Adopting a finishing insert with the described geometry and NS9530 material reduces rework and shortens cycle times by producing acceptable surface quality on initial passes. The double-sided chipbreaker helps control chip formation during moderate feeds, supporting safer chip evacuation and consistent surface appearance. From a process point of view, the combination of cemented carbide substrate and the cermet cutting surface contributes to repeatable edge integrity, making the component finish more reliable batch to batch. For manufacturers seeking to increase first-pass yield and lower non-productive time, this specification represents a practical upgrade in the finishing toolset. For specification advice, availability or to order genuine Tungaloy TNMG160402 NS9530 inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998198 SKU: 6998198-Tungaloy Manufacturer SKU: TUN6998198 Model series: ISO turning indexable inserts Material: cemented carbide Grade: NS9530 Cutting material type: uncoated cermet Dimensions / Measurable data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Features / Applications ISO designation: TNMG160402 Triangular plate Double-sided chipbreaker With cylindrical hole For turning, finishing of steel Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TNMG160402 NS9530 Tungaloy indexable insert is developed as a finishing grade for steel and performs best in continuous cuts with small depths of cut. Can this insert be used in standard TNMG holders? Yes, the insert follows the ISO TNMG format; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. How does the NS9530 grade influence surface finish and tool life? The NS9530 uncoated cermet grade provides a sharp cutting edge that promotes low cutting forces and a high surface finish in finishing applications, offering predictable edge behaviour under the specified cutting conditions. Is chip control supported for finishing feeds? The double-sided chipbreaker integrated in the insert helps control chips during finishing feeds and supports safer evacuation while maintaining surface quality. What are the key dimensions to check before fitting the insert? Confirm the insert size (16 mm), thickness (4.76 mm), corner radius (0.2 mm) and the presence of the cylindrical hole to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T6215 Wendeplatten - Tungaloy
Take advantage of the excellent combination of CVD-coated carbide grade T6215 and a 0.2 mm nose radius for consistent surface quality and long tool life; the insert offers reliable performance in turning of stainless steels and can be supplied directly via Metav Werkzeuge or discussed with the consultants if further advice is required. TNMG160402 T6215 Tungaloy turning insert — CVD-coated carbide, 0.2 mm nose radius TNMG160402 T6215 Tungaloy turning insert is a triangular ISO indexable insert designed for external and internal turning, particularly suited to machining stainless steels under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 Triangular ISO insert, 16 mm size 0.2 mm nose radius for fine finishing Double-sided chipbreaker, cylindrical hole Consistent wear resistance for uninterrupted production The CVD-coated carbide composition in grade T6215 provides a durable cutting edge and high wear resistance, which translates into extended tool life and fewer indexings. For series production, this behaviour reduces changeover frequency and supports a steady machining rhythm. The substrate material is cemented carbide, optimised for high-temperature abrasion resistance, while the coating enhances oxidative and abrasive wear control, making the insert particularly effective when machining stainless steels in stable cut conditions. Secure clamping and geometry for predictable results The triangular geometry combined with a cylindrical hole and matching tolerance class ensures safe, repeatable clamping in compatible ISO holders. The double-sided chipbreaker layout provides two usable cutting edges per side, improving cost efficiency per indexation. With a nominal size of 16 mm and a plate thickness of 4.76 mm, the insert fits standard TNMG-compatible toolholders; compatibility is determined by form, clearance angle, tolerance grade, fastening type, size and thickness, so holders must be matched accordingly. Surface finish and edge stability optimised for fine turning A 0.2 mm nose radius is well suited to fine finishing operations where dimensional accuracy and surface integrity are priorities. The small radius limits cutting forces while maintaining edge strength for light to medium cuts. In combination with the T6215 coating, edge robustness is improved, reducing the risk of notch wear and enabling more consistent surface quality on parts where appearance or fit is critical. Application guidance and economic rationale The insert is intended for turning applications and performs best under stable to lightly interrupted cuts; selection of chipbreaker style and grade should match workpiece material, cutting strategy and machine rigidity. The design supports productive machining of turned components with a favourable balance of tool life and process reliability, making it a cost-effective choice where repeatability and reduced downtime are essential. For additional technical clarification or material-specific recommendations, technical advisors are available to assist in optimising insert selection. For specification checks or to secure the Tungaloy TNMG160402 T6215 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and prompt supply. Technical data Article number: 6944830-Tungaloy Manufacturer article number: 6944830 SKU: TUN6944830 ISO designation: TNMG160402 Model series: ISO turning indexable inserts Application: Turning Dimensions / measurable data Size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Rake angle: 0° Included hole: cylindrical hole Materials / special features Material: carbide (cemented carbide) Coating: CVD-coated grade T6215 Chipbreaker: double-sided Geometry: triangular, with hole Compatibility: ISO holders with matching form and tolerance FAQ What materials is this insert best suited for? The TNMG160402 T6215 Tungaloy turning insert (SKU 6944830-Tungaloy) is optimised for machining stainless steels under stable to slightly interrupted cutting conditions; the CVD coating improves wear resistance during such applications. Can this insert be used for external and internal turning? Yes, the triangular geometry and cylindrical-hole mounting make the insert suitable for both external and internal turning operations when used with a compatible ISO toolholder. How many cutting edges are available per insert? The insert features a double-sided chipbreaker design, providing multiple usable cutting edges to enhance economy per index and reduce tooling costs. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius is intended for fine finishing, delivering good surface integrity and dimensional control while keeping cutting forces moderate on suitable setups. Is the grade T6215 suitable for interrupted cuts? Grade T6215 is designed for wear resistance and edge stability; it performs reliably in stable to lightly interrupted cuts, while heavy interruptions may require a more robust grade or adapted cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 for improved wear resistance, compact 60° triangle geometry and reliable chip control to maintain steady production when turning stainless steels. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and application advice. TNMG160402 T6215 — Indexable turning insert for turning, Tungaloy A TNMG160402 T6215 indexable insert engineered for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide T6215 for stainless steels Triangle insert with 60° cutting angle 0.2 mm corner radius for fine finishes Double-sided chipbreaker for consistent chips Cylindrical hole for secure clamping Improved wear resistance for demanding turning tasks The combination of a CVD-coated surface and a carbide substrate in grade T6215 provides a balance of wear resistance and edge strength suited to rostfrei applications. In practice, this means longer cutting edge life under continuous turning conditions and improved resistance to built-up edge when machining work-hardened surfaces. The coating reduces flank wear and supports a predictable tool life, which helps stabilise process parameters and reduces unscheduled tool changes. Geometry designed for precision and rigidity The triangular TNMG form with a 60° main cutting angle, a 0.2 mm corner radius and a plate thickness of 4.76 mm offers a rigid cutting geometry that promotes dimensional accuracy. The cylindrical hole and standard ISO shape ensure reliable clamping in compatible holders; correct matching of form, tolerance class and thickness is essential for repeatable results. These design choices translate into consistent surface finishes and controlled cutting forces on both external and internal profiles. Productivity through chip control and economy of use A double-sided chipbreaker provides two usable edges per side, enabling cost-effective indexing and quick restoration of cutting capability without tool replacement. The chipbreaker geometry is optimised for stainless steels to deliver manageable chip forms and reduce interruptions from erratic swarf. For medium- to high-volume turning operations, the insert's combination of T6215 wear resistance and indexed usability supports higher uptime and a favourable cost-per-edge metric. System considerations and practical selection guidance Compatibility to a specific holder depends on the insert’s form, clearance angle (0°), tolerance class, fixing method and thickness. The insert performs best when matched with a holder designed for ISO triangular inserts and when the chosen chipbreaker and grade reflect the workpiece material and machining stability. For assembly, ensure the clamp and backing plate suit the TNMG160402 geometry to avoid vibration and to preserve cutting-edge accuracy. Metav Werkzeuge can advise on holder matching and process optimisation if required. Discuss the application with Metav Werkzeuge to confirm holder compatibility and select the ideal Tungaloy grade for rostfrei machining; specialist advice and supply are available via Metav Werkzeuge. Technical data Article number: 6951023 Manufacturer SKU: TUN6951023 SKU: 6951023-Tungaloy Model series: ISO-Drehwendeschneidplatten Shape: triangular Hole: cylindrical hole Material: carbide Coating / grade: T6215 Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Cutting angle: 60° ISO designation: TNMG160402 Chipbreaker: double-sided Application: turning Facts Plate size: 16 mm Radius: 0.2 mm Plate thickness: 4.76 mm Angle: 60° Article number: 6951023 SKU (manufacturer): TUN6951023 Special features CVD-coated hard metal grade T6215 Suitable for rostfrei (stainless steels) Double-sided chipbreaker for consistent chips ISO-compatible triangular insert Designed for stable to slightly interrupted cuts Cylindrical hole for secure clamping Intended for external and internal turning FAQ What materials is this insert suitable for? The TNMG160402 T6215 insert is specified for machining stainless steels; the T6215 grade and chipbreaker geometry support rostfrei applications under stable cutting conditions. How many cutting edges are available per insert? Because the insert is double-sided with a triangular form, multiple usable edges are available; indexing restores a fresh cutting edge without full insert replacement. What holder features are required for correct use? A holder compatible with ISO triangular inserts, matching the insert thickness (4.76 mm), clearance angle (0°) and the cylindrical hole style is required for secure and accurate clamping of the TNMG160402. Can this insert handle interrupted cuts? The grade and geometry of the T6215 insert are intended for stable to slightly interrupted conditions; heavy interruption may require a different sort or an adjusted cutting strategy. Is the coating specified on the product? Yes, the insert uses a CVD-coated hard metal grade identified as T6215, which is selected for wear resistance in rostfrei machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that excels in turning stainless steels under stable to slightly interrupted conditions; the triangular ISO insert with a 0.2 mm nose radius and double‑sided chipbreaker delivers consistent chip control and long tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for advice on holder compatibility and batch availability. TNMG 160402 T6215 TNMG — Turning insert (ISO) by Tungaloy TNMG160402 T6215 is an ISO‑specified triangular indexable insert for precision turning applications, especially suited to machining stainless steels. *ISO TNMG160402 triangular insert *CVD-coated carbide grade T6215 *Optimised for stainless steel turning *Double-sided chipbreaker, cylindrical hole High‑performance grade for reliable stainless turning The insert is manufactured in a CVD‑coated carbide grade (T6215) developed for wear resistance when machining stainless steels. The coating and substrate combination reduces flank wear and enhances edge stability, which results in longer in‑service life and fewer tool changes. For production environments focused on repeatable output, this means reduced downtime and a more predictable tool budget. The material pairing also allows for stable performance under light interruptions, maintaining surface finish and dimensional integrity. Precision geometry that stabilises cutting and chip control With an ISO geometry of TNMG160402 and a 0.2 mm nose radius, the insert balances edge strength and fine surface finish. The double‑sided chipbreaker provides controlled chip formation for a variety of feeds and depths of cut, while the 60° cutting angle supports versatile turning operations. The 0° clearance geometry simplifies setup and helps ensure consistent contact with the workpiece, reducing vibration and improving concentricity in external and internal turning tasks. System compatibility and straightforward integration The insert is ISO‑standard, triangular in form and supplied with a cylindrical hole, making it compatible with a wide range of external holders and boring bars once the form, clearance, tolerance class, fastening method, size and thickness are matched. The system approach (insert, holder, shim/lock set and replacement screws) ensures secure clamping and repeatable seating, which is essential for accurate indexing and consistent tool life. Selection of the correct chipbreaker and grade should follow the workpiece material and machining stability. Productivity and process benefits for workshop workflows Using an indexable insert in this specification reduces non‑cutting time by simplifying reconditioning and indexing compared with brazed tooling. The CVD surface treatment enhances wear resistance, supporting higher cumulative material removal before replacement. For operations that prioritise throughput and surface quality on stainless alloys, this insert delivers a combination of durability and performance that supports reliable batch production and fewer interruptions for tool changes. For fitting advice, availability or to purchase the Tungaloy TNMG160402 T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and delivery options Technical data Article number: 6966198 Manufacturer SKU: TUN6966198 Label: TNMG160402 T6215 Tungaloy‑Wendeplatte Model series: ISO‑Drehwendeschneidplatten Material: carbide ISO designation: TNMG160402 Shape: triangular Hole: with hole Hole style: cylindrical hole Key measurements Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Cutting angle: 60° Features CVD‑coated carbide, grade T6215 Double‑sided chipbreaker Application: turning Suitable for stainless steels under stable to slightly interrupted conditions Compatible with ISO clamping systems, holders, shims and fastening sets FAQ What materials is this insert suitable for? The TNMG160402 T6215 insert is optimised for machining stainless steels, offering improved wear resistance and chip control in those alloys. Is the insert indexable on both sides? Yes, the insert features a double‑sided chipbreaker, allowing indexing to a fresh cutting edge and extended service life. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance, tolerance class, fastening method, size and thickness; the TNMG160402 fits standard ISO triangular holders designed for the 16 mm size and 4.76 mm thickness. What are the main advantages of the T6215 grade? The T6215 CVD‑coated carbide delivers wear resistance and stable edge performance, reducing flank wear and supporting longer tool life in stainless‑steel turning. Can this insert be used for interrupted cuts? The grade and geometry are suited to stable to slightly interrupted cutting conditions; severe interruptions may require a different chipbreaker or grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160402 T9215 Wendeplatten - Tungaloy
High wear resistance and controlled chip formation combine for consistently productive medium-steel turning, while the ISO geometry and cylindrical-hole fastening guarantee repeatable seating and stable clamping. Order the TNMG160402 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160402 T9215 Turning Insert (TNMG160402) by Tungaloy — CVD-coated carbide, 60° The TNMG160402 T9215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for productive machining of medium-strength steels. CVD-coated carbide T9215 for durability Triangular insert with 60° geometry Double-sided chipbreaker for controlled chips Cylindrical-hole mounting for secure seating Consistent productivity through CVD-coated carbide The CVD-coated carbide grade T9215 is formulated to balance wear resistance with fracture resistance, making it a reliable choice for sustained production runs. This cutting grade supports higher cutting speeds and longer tool life in continuous to slightly interrupted cuts, which reduces unplanned stops and improves overall throughput. As a result, process stability and component repeatability are enhanced, providing measurable improvements in machining efficiency. Secure seating and ISO-based compatibility Built to an ISO geometry, the insert’s triangular form and cylindrical hole ensure precise alignment and repeatable clamping with compatible turn holders. The defined 60° included angle and a 0° relief angle are critical for predictable tool engagement and contact forces; matching the holder by form, tolerance class, fastening method, size and thickness avoids misfit and vibration. Clear compatibility reduces setup time and keeps the tool changeover consistent across batches. Improved chip control for surface quality and safety The double-sided chipbreaker design manages chip formation so that swarf is broken and evacuated reliably, improving surface finish and reducing the risk of entanglement. Controlled chips lower the chance of secondary damage to the workpiece and tooling, and support safer, cleaner shop-floor conditions. This insert’s geometry contributes directly to consistent part quality and reduced rework, particularly in routine turning applications. Application guidance for predictable results Select the chipbreaker style and the T9215 grade when machining medium steels to achieve a good balance of tool life and cutting performance. The insert suits both external and internal turning operations and is best used where cuts are continuous or only slightly interrupted. For heavier interruptions or different materials, choose an alternative chipbreaker or grade matched to the workpiece. With correct selection and setup, the insert helps to lower production costs by extending tool life and maintaining surface consistency. For tailored advice on using Tungaloy CVD-coated inserts and to place orders through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and availability Technical Data Article number: 6951019 Manufacturer SKU: TUN6951019 Internal SKU: 6951019-Tungaloy Model series: ISO turning indexable inserts Type designation: TNMG160402 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Grade: CVD-coated carbide T9215 Insert form: triangular, double-sided Chipbreaker: double-sided Application: turning (external and internal) Suitable for continuous to slightly interrupted cuts Compatibility: ISO holders (form, tolerance, fastening, size, thickness) FAQ Which materials is this insert best suited for? The TNMG160402 T9215 insert is optimised for medium-strength steel machining; the CVD-coated carbide T9215 grade is engineered for wear resistance and fracture safety in these materials. Can the insert be used for both external and internal turning? Yes, the triangular design and ISO geometry make this indexable insert suitable for both external and internal turning operations when paired with the correct holder. What does the 0.2 mm corner radius affect in machining? A 0.2 mm radius balances edge strength and surface finish: it reduces chipping risk on interrupted cuts while still providing a fine surface when cutting continuous passes. Is the insert reversible or single-use per edge? This insert is double-sided, providing multiple usable cutting edges; reversing the insert is possible according to the indexed design. How does the cylindrical hole influence clamping? The cylindrical hole enables secure, repeatable seating in compatible holders, improving positional accuracy and minimising movement under cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a compact 0.2 mm corner radius for productive medium-steel turning with precise chip control; for ordering or technical advice, contact Metav Werkzeuge or ask our consultants. TNMG 160402 T9215 – Turning insert (ISO) by Tungaloy TNMG160402 T9215 is a triangular ISO turning insert designed for medium-steel machining and indexable turning applications CVD-coated carbide for high wear resistance Optimised for medium steel machining Double-sided chipbreaker for reliable chip control 0.2 mm corner radius and 60° geometry Increased productivity through CVD-coated carbide The T9215 grade combines a CVD-coated carbide substrate with a formulation tuned for medium steel applications, delivering improved wear resistance and fracture toughness. This results in longer edge life during continuous to lightly interrupted cuts and fewer index changes, which raises hourly throughput. The coating reduces flank wear and supports higher cutting parameters where machine rigidity and process stability allow, making the insert an economic choice for batch production and serial turning operations. Consistent set-ups thanks to ISO compatibility and clear interface data As an ISO-standard insert, compatibility with toolholders is determined by geometry, relief angle (0°), tolerance class, fastening method, size and thickness. The insert’s 16 mm size, 4.76 mm thickness and triangular form ensure predictable mounting in appropriately specified holders; the cylindrical hole and clamping arrangement permit secure seating and quick indexing. Clear matching of holder and insert parameters reduces set-up times and downtimes, helping to maintain stable cutting conditions on the shop floor. Better surface finish and chip behaviour for reliable turning The double-sided chipbreaker provides controlled chip formation and stable evacuation, reducing the risk of entanglement and enabling repeatable surface quality. A 0.2 mm corner radius allows fine edge detail and can improve finish on light finishing passes, while the 60° insert geometry supports effective access to external and internal contours. Integrated into a complete system — insert, holder, shim and clamping set — the component supports predictable tool life and straightforward stocking strategies for production environments. For tailored advice on specifying the TNMG160402 T9215 insert or to confirm holder compatibility and availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best configuration for the application. Technical Data Article number: 6966196 Manufacturer item no.: 6966196 Manufacturer SKU: TUN6966196 Model series: ISO turning indexable inserts SKU: 6966196-Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Insert angle: 60° Hole: cylindrical hole Geometry: triangular Grade/coating: T9215 CVD-coated carbide Application: Turning Special features CVD-coated carbide Suited for medium steel machining Designed for continuous to light interrupted cuts Double-sided chipbreaker ISO-standard indexable insert Compatible with holder determined by form, tolerance, fastening, size and thickness Triangular, indexable insert with cylindrical hole FAQ What materials is this insert best suited for? The TNMG160402 T9215 insert is formulated for medium steel machining, combining wear resistance and toughness for productive turning operations. Can the insert be used for internal and external turning? Yes, the insert’s triangular geometry and chipbreaker design make it suitable for both external and internal turning, provided the correct holder geometry is selected. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius gives finer edge detail that can improve surface finish on light finishing passes while moderating cutting forces during profile turning. Is the insert indexable and easy to replace? The TNMG160402 is double-sided and indexable through rotation; secure mounting via the cylindrical hole and appropriate clamping components enables quick index changes. What does the T9215 grade signify? T9215 is a CVD-coated carbide grade optimised for medium-steel applications, offering a balance of wear resistance and fracture toughness for consistent tool life across serial machining tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, proven chip control and ISO compatibility for consistent turning performance; the CVD‑coated grade T9215 supports productive, continuous to light interrupted cuts. Order the TNMG160402 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160402 T9215 Tungaloy indexable insert for turning – CVD‑coated carbide, 60° TNMG 160402 T9215 is an ISO‑compliant triangular indexable insert for external and internal turning, optimised for medium steel and designed for productive, repeatable machining. CVD‑coated carbide grade T9215 Triangular 60° geometry for versatile turning Nose radius 0.2 mm for balanced finish and strength Double‑sided chipbreaker for stable chip control Reliable ISO compatibility for predictable toolholding The CVD‑coated carbide composition of this indexable insert ensures a combination of abrasion resistance and edge toughness that suits serial production. As an ISO‑normed turning plate, compatibility with a toolholder depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; these parameters determine secure clamping and repeatable positioning. The plate’s triangular shape and standard designation simplify holder selection across established tool systems, reducing setup variability and improving process reliability. Consistent productivity and surface quality in medium‑steel turning The geometry and tooling grade have been selected to deliver efficient material removal without sacrificing surface finish: the 60° geometry provides a robust cutting edge for longitudinal and facing operations, while the nose radius 0.2 mm balances edge strength with a fine machined finish. The double‑sided chipbreaker promotes controlled chip formation during continuous to light interrupted cuts, lowering the risk of edge fracture and minimising unplanned downtime. Plate thickness of 4.76 mm and the cylindrical hole fixation support rigid clamping, which contributes to repeatable part quality and extended tool life under stable machining conditions. Practical system guidance for straightforward integration Selection of the appropriate chipbreaker and grade should follow the workpiece material, machining type and machine–holder stability; the T9215 grade is recommended as a first choice for medium steel, combining wear resistance with fracture toughness for higher productivity. The component system comprises the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws — ensuring straightforward assembly and quick index changes. For production environments seeking consistent cycle times and reproducible results, this insert provides a pragmatic mix of durability and machining economy; technical queries can be addressed with targeted cutting parameters and holder recommendations. For robust medium‑steel turning choose the T9215 grade from Tungaloy and consult Metav Werkzeuge for holder compatibility and application support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6944827 Manufacturer SKU: TUN6944827 Label: TNMG160402 T9215 Tungaloy‑Wendeplatte Facts Insert designation: TNMG160402 Plate size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.2 mm Geometry angle: 60° Clearance angle: 0° Plate form: triangular Hole: with hole Hole style: cylindrical Chipbreaker: double‑sided Coating/grade: T9215 Material: carbide Special features ISO‑compliant turning indexable insert CVD‑coated carbide for wear resistance and toughness Intended application: external and internal turning Suitable for continuous to light interrupted cuts in medium steel System components: insert, holder/boring bar, shim/clamping set, spare screws Compatibility determined by form, clearance angle, tolerance class, fastening, size, thickness FAQ Is this insert suitable for medium steel machining? The TNMG160402 T9215 Tungaloy indexable insert is specified for medium steel and is designed for continuous to light interrupted turning applications, offering a balance of wear resistance and edge toughness. What effect does the nose radius have on the machined surface? A nose radius of 0.2 mm reduces cutting forces and supports a fine surface finish while maintaining sufficient edge strength for typical finishing and semi‑finishing passes. How is the insert fastened to the holder? The insert uses a cylindrical centre hole for screw clamping; secure fixation requires a holder matching the insert’s form, clearance angle, tolerance class, size and thickness. How does the double‑sided chipbreaker influence tooling economy? The double‑sided chipbreaker promotes controlled chip formation and extends usable edge life by allowing indexing to alternate cutting faces; this improves overall tooling economy for repetitive turning tasks. Which tooling components are required to build the cutting system? A complete system comprises the ISO turning insert, a compatible external holder or boring bar, the appropriate shim/clamping set and replacement screws to ensure stable clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade that combines durability and consistent chip control for medium‑to‑heavy steel turning; compatible ISO‑form design ensures straightforward integration into existing tool systems. Order directly via Metav Werkzeuge or consult the technical team for application advice. TNMG 160402 T9225 Turning insert (TNMG160402) by Tungaloy — CVD‑coated cemented carbide, 0.2 mm corner radius TNMG160402 T9225 is an ISO‑standard triangular turning insert engineered for medium‑to‑heavy steel machining where toughness and repeatable edge performance are required CVD‑coated cemented carbide for high wear resistance Robust universal grade T9225 for steel applications Triangular TNMG form with 0.2 mm corner radius Designed for interrupted and medium‑heavy turning High‑performance cutting for consistent productivity The CVD‑coated cemented carbide substrate delivers a balanced combination of wear resistance and toughness, making it particularly effective in demanding steel turning operations. The T9225 grade is formulated as a universal, robust option for medium‑to‑heavy steel cutting, providing stable cutting edges even under mildly interrupted cuts. This results in longer tool life and fewer indexings, which translates into lower tool‑change downtime and more predictable cycle times on production runs. Improved process reliability through ISO compatibility Designed as an ISO‑standard insert, this triangular geometry fits conventional holders and boring bars when matched for form, relief angle, tolerance class, clamping method, size and thickness. The compatibility is determined by those parameters rather than brand alone, so correct pairing reduces vibration and ensures secure clamping. The insert’s cylindrical hole supports positive, repeatable fastening; the overall system—insert, appropriate holder, clamp and replacement screws—delivers reliable assembly and repeatable part quality. Practical selection and application benefits The double‑sided chipbreaker and 0.2 mm corner radius smooth the transition between roughing and finishing passes, helping to maintain a consistent surface quality without excessive manual adjustment. For slightly interrupted cuts or variable engagement conditions, the toughness of the T9225 grade lowers the risk of chipping. Where stable clamping and insert orientation are available, moderate feeds and cutting speeds yield efficient metal removal while preserving edge life. Operational gains and workshop impact Adopting this insert supports measurable efficiency improvements: reduced tooling interventions, improved part tolerances and steadier surface finishes in serial production. The triangular form provides three cutting edges per indexing cycle, improving cost efficiency per edge. Backed by Tungaloy’s industrial practice, the component is suited to workshops seeking predictable tool performance and an extended service interval under typical steel turning scenarios. For specific application recommendations for the Tungaloy TNMG160402 T9225 insert or to discuss suitable holder pairings, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951022 Manufacturer SKU: TUN6951022 Model series: ISO‑Drehwendeschneidplatten Product name: TNMG160402 T9225 Tungaloy‑indexable insert Material: Hartmetall (cemented carbide) Coating / grade: T9225 (CVD‑coated) Application: Drehen Facts Corner radius: 0.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Main cutting edge angle: 60° Relief (free) angle: 0° Hole: with hole (cylindrical) Special features ISO‑standard triangular geometry (TNMG) Double‑sided chipbreaker CVD‑coated cemented carbide grade for steel Designed for medium‑to‑heavy turning and interrupted cuts Compatible with suitable external holders and boring bars System components: insert, holder/boring bar, clamp/seat and replacement screws FAQ Is this insert suitable for interrupted cuts? The TNMG160402 T9225 insert is designed with a robust CVD‑coated cemented carbide grade that tolerates mildly interrupted cuts, making it suitable for variable engagement conditions in steel turning. Which materials is this grade intended for? The T9225 grade is optimised for steel machining, particularly medium‑to‑heavy turning tasks; it provides a balance of wear resistance and toughness for production in ferrous materials. How is compatibility with a specific holder ensured? Compatibility depends on matching the insert form, relief angle (frees angle), tolerance class, fastening method, size and thickness to the holder specification rather than on the insert name alone. Can both sides of the insert be used? Yes — the triangular TNMG form is double‑sided, allowing multiple indexings and efficient edge utilisation before replacement. What are the key dimensional specifications to check before fitting? Important dimensions are the corner radius 0.2 mm, plate size 16 mm, thickness 4.76 mm, and the cylindrical hole for clamping; verify these against the holder data sheet. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a compact 0.2 mm nose radius and ISO conformity for reliable medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult the specialists for process-matched grade selection. TNMG 160402 T9225 indexable turning insert – CVD-coated carbide, 0.2 mm radius (Tungaloy) A TNMG 160402 T9225 indexable turning insert designed for external and internal turning, offering a robust universal grade for medium to heavy steel machining. CVD-coated carbide grade T9225 Robust for medium to heavy steel Triangular 16 mm plate with 0.2 mm radius Double-sided chipbreaker, cylindrical hole Proven performance where stability matters The combination of a CVD-coated surface and cemented carbide substrate delivers a balance of wear resistance and toughness that suits varying cutting conditions. As a universal grade, T9225 is specified for medium to heavy steel machining where fluctuating engagement or light interruptions can occur; this results in fewer insert changes and a more consistent production flow. The engineered coating reduces built-up edge and supports longer tool life under cyclic loads, improving overall process efficiency and reducing downtime. Clear guidance on compatibility and fit Compatibility with holders depends on the insert’s form, clearance geometry and tolerance class. The triangular ISO plate (16 mm) with a cylindrical hole and 0° clearance sits securely in ISO-standard turning holders that accept TNMG-style inserts. The 60° included angle and standard thickness of 4.76 mm match many common external and internal turning toolblocks, ensuring reliable clamping and repeatable positioning for accurate diameters and surface quality. Why the T9225 grade makes a difference in mixed conditions The T9225 grade is formulated to offer stable chip formation and extended edge life when machining steels with varied toughness or interrupted cuts. The double-sided chipbreaker provides consistent chip control for a range of feeds, while the 0.2 mm nose radius enables fine profile detail without compromising edge strength. Together, these characteristics support cost-effective machining by reducing scrap rates and increasing the number of usable edges per insert. Workshop advantages: handling, storage and application A compact triangular insert simplifies inventory and tooling strategies: the 16 mm plate size and double-sided geometry maximise usable edges per insert, lowering consumable turnover. The CVD-coated carbide surface is tolerant of modest changes in cutting parameters, making it suitable for batch production or mixed-lot work. For best results, select matching holder clearance and tightening torque specified by the toolholder manufacturer; correct seating prevents chatter and preserves the insert’s wear performance. For tailored advice on integrating Tungaloy CVD grades into existing turning processes, contact Metav Werkzeuge — their consultants can recommend the right insert and confirm availability for immediate supply; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6966197 Manufacturer SKU: TUN6966197 SKU: 6966197-Tungaloy Manufacturer: Tungaloy Material: carbide Model series: ISO turning indexable inserts Numbers / Core technical data Plate size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 0° Included angle: 60° ISO designation: 160402 Special features CVD-coated carbide Grade T9225 — universal, robust Triangular plate form With cylindrical hole (with bore) Double-sided chipbreaker Suited to external and internal turning Compatible with ISO-standard holders Designed for medium to heavy steel machining FAQ What materials is this insert suitable for? The TNMG 160402 T9225 indexable insert is intended primarily for medium to heavy steel machining; the T9225 grade gives robustness for mixed conditions and light interruptions. How does the T9225 grade affect tool life? The T9225 CVD-coated carbide offers improved wear resistance and stable chip formation, which typically extends edge life and reduces the frequency of insert changes in demanding turning operations. Is the insert compatible with standard TNMG holders? Yes — the insert conforms to ISO TNMG geometry (160402) with a triangular form, cylindrical hole and standard thickness, making it compatible with holders designed for TNMG inserts when matched by clearance and clamping specifications. What chip control can be expected with the double-sided chipbreaker? The double-sided chipbreaker provides consistent chip formation across a range of feeds, aiding reliable evacuation during turning and reducing the risk of entanglement on interrupted cuts. Which dimensional values are critical when selecting the holder? Key dimensions are the plate size (16 mm), thickness (4.76 mm), nose radius (0.2 mm) and included angle (60°); matching these with the holder’s seating geometry ensures correct clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for medium-to-heavy turning, a compact 0.2 mm nose radius for accurate profiles, and ISO compatibility that eases integration with standard holders; order the inserts via Metav Werkzeuge or consult the team for application advice. TNMG160402 T9225 turning insert — CVD-coated carbide, 60° triangle, Tungaloy TNMG160402 T9225 is a CVD-coated carbide turning insert for medium-to-heavy steel turning, engineered for robust chip control and repeatable performance in varying cut conditions CVD-coated carbide for robust performance ISO TNMG160402 triangular form, 60° 0.2 mm nose radius for accurate profiling Double-sided chipbreaker with cylindrical hole Precision for varying turning tasks and stable cut conditions The insert is produced in a CVD-coated carbide grade T9225, specified for reliable performance in medium-to-heavy steel turning where variable engagement or slightly interrupted cuts demand added toughness. The triangular ISO TNMG160402 geometry with a 60° included angle provides a balance between edge strength and access to profiles, while the 0.2 mm nose radius supports precise detail work. The coated substrate improves flank and crater wear resistance, which in practical terms extends the useful life of the component and reduces tooling change frequency. Compatibility and straightforward integration into ISO systems Designed to the ISO plate family, the insert matches standard clamping and holder forms; compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The TNMG160402 form fits most triangular TNMG external holders and boring bars that accept ISO triangular inserts. The presence of a cylindrical centre hole enables secure mechanical fastening, and the double-sided design allows two indexed cutting edges per insert, improving economy in batch and single-part production. Chip control and surface outcome under varying conditions A double-sided chipbreaker is incorporated to manage swarf and stabilise cutting forces during turning, which reduces vibration in moderate to heavy cuts and supports a consistent surface finish. In conjunction with the T9225 grade, the chipbreaker helps form short, controllable chips on steels and alloyed materials under recommended cutting parameters. The result is improved process stability and fewer interruptions for manual chip clearing, supporting higher net machining productivity. Economy, handling and achievable tool life The combination of a robust carbide substrate and CVD protection yields a cost-effective option for shops seeking long tool life with reliable edge behaviour. The insert’s double-sided nature and indexed design contribute to lower cost per cutting edge, while the moderate nose radius and standard plate thickness allow trimming of wall thickness in fixtures and easy seat-in into predetermined holders. For operations prioritising repeatability and straightforward tool management, this grade presents a pragmatic balance between durability and finish quality. Speak to Metav Werkzeuge for application-specific recommendations and rapid supply of Tungaloy TNMG160402 T9225 inserts and compatible holders Technical data Article number: 6944829 Manufacturer SKU: TUN6944829 SKU: 6944829-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TNMG160402 T9225 Tungaloy-Wendeplatte Numbers / Core technical data Insert designation: TNMG160402 Grade: T9225 (CVD-coated) Nose radius: 0.2 mm Included angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Designs / Special features Triangular insert, double-sided, with cylindrical hole CVD-coated carbide for medium-to-heavy steel turning 0° clearance (relief) angle compatibility ISO-standard geometry for broad holder compatibility Chipbreaker suitable for stable chip formation and interrupted cuts FAQ What materials is this insert suitable for? The TNMG160402 T9225 insert and its T9225 CVD-coated carbide grade are intended primarily for steel machining in medium-to-heavy turning operations and for situations with variable engagement where enhanced toughness is required. How is the insert secured in a holder? This triangular insert uses a cylindrical hole for mechanical fastening; the ISO geometry and hole style match holders that accept TNMG plates and secure them with the appropriate screw and clamp system. How many cutting edges are available per insert? The insert is double-sided, providing two indexed cutting edges per side where applicable, enabling multiple edge uses before disposal and improving cost efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH110 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade engineered for wear and breakout resistance together with a compact 0.4 mm corner radius and robust 60° triangular geometry to maintain process security in turning operations. Order the insert directly via Metav Werkzeuge or request advice from our consultants for a precise holder match. TNMG160404 AH110 Tungaloy indexable turning insert — PVD-coated carbide, 60° The TNMG160404 AH110 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a sharp cutting edge and consistent machining reliability. PVD-coated carbide grade AH110 Double-sided chipbreaker geometry 60° triangular insert for stable cutting 0.4 mm corner radius for fine detail Dependable performance for precision turning The PVD-coated carbide construction of this indexable insert provides a balance of surface endurance and edge integrity that supports repeatable production runs. The AH110 grade is formulated to resist wear and chipping under demanding turning conditions, which reduces unplanned tool changes and contributes to predictable cycle times. Compatibility with a chosen holder depends on insert shape, clearance angle (0°), tolerance class, mounting method, size and thickness; ensuring these parameters match the toolholder preserves clamping security and cutting stability for external and internal turning tasks. Better edge control and surface finish with minimal setup A 0.4 mm corner radius combined with a double-sided chipbreaker delivers controlled chip formation and improved surface quality on turned components. The triangular 60° geometry gives three usable corners per index, increasing productivity and economy, while the central cylindrical hole allows secure fastening in the seat. The insert’s 4.76 mm thickness and 16 mm inscribed circle support stable cutter overhang and reduced vibration, which together promote a consistent finish and dimensional accuracy on short to medium projections. Application-focused grade for reliable production Designed specifically for turning, the AH110 specification emphasises process security where a sharp cutting edge and robust performance are needed. The ISO-format insert integrates into a system comprising an ISO insert seat, an appropriate external holder or boring bar, a shim or clamp set and replacement screws to ensure assembly reliability. For machining specialists seeking a reproducible result across batch sizes, the combination of AH110’s wear resistance and the TNMG geometry supports longer tool life and fewer interruptions. If further application data is required, technical consultants can advise on holder selection and machining parameters. For precise turning with Tungaloy’s AH110 performance, request TNMG160404 through Metav Werkzeuge or contact our application experts at info@metav-werkzeuge.com or +49 2822 7131930 for tailored holder recommendations. Technical Data Article number: 6808337 Manufacturer SKU: TUN6808337 Sales SKU: 6808337-Tungaloy Label: TNMG160404 AH110 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Dimensions & core data Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 60° Features & applications Triangular insert form Double-sided chipbreaker PVD-coated carbide grade AH110 Central cylindrical hole for secure mounting System: ISO insert, holder, shim/clamping set and replacement screws Intended application: turning (external and internal) FAQ What turning tasks is this insert suitable for? The TNMG160404 AH110 insert from Tungaloy is intended for external and internal turning where a sharp cutting edge and consistent process security are required; select the chipbreaker and grade to match workpiece stability and machining style. How is compatibility with holders determined? Compatibility depends on insert shape, clearance angle (0°), tolerance class, mounting arrangement, size and thickness; verify these parameters against the chosen holder before fitting the TNMG160404 AH110 insert. What are the advantages of the AH110 grade and PVD coating? AH110 is a wear- and breakout-resistant PVD-coated carbide grade that enhances edge life and thermal stability during turning, supporting longer, more reliable production cycles with fewer edge failures. Can both sides of the insert be used? Yes — the triangular design and double-sided chipbreaker permit indexing to additional cutting corners, increasing the number of usable edges per insert and improving cost efficiency. Which identifiers should be used when ordering replacements? Refer to the sales SKU 6808337-Tungaloy or the manufacturer SKU TUN6808337 when ordering the TNMG160404 AH110 insert to ensure correct delivery and traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH120 Wendeplatten - Tungaloy
Combining the PVD‑coated AH120 grade with TNMG triangular geometry and a 0.4 mm corner radius delivers durable edge life and precise surface finish for both external and internal turning; order the TNMG160404 AH120 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 160404 AH120 — ISO turning insert, PVD-coated carbide (Tungaloy) The TNMG160404 AH120 is an ISO‑standard triangular insert designed for general turning operations, offering a sharp cutting edge and high process security for external and internal turning tasks. TNMG 160404 geometry, triangular insert PVD-coated carbide AH120 for wear resistance 0.4 mm corner radius for precise turning Double-sided chipbreaker, cylindrical hole High-performance turning with reliable edge life The insert’s combination of PVD‑coated carbide and the AH120 grade is optimised for wear resistance and edge stability during continuous turning. This results in consistent cutting performance and fewer insert changes, which supports higher productivity and reduced downtime. For operations where a sharp cutting edge and controlled chip formation are required, the plating and substrate pairing help maintain a stable cutting edge under typical turning feeds and speeds. ISO compatibility that simplifies toolset selection The ISO designation and the TNMG form ensure compatibility with a wide range of external holders and boring bars; holder fit depends on form, clearance angle, tolerance class, fastening method, size and thickness. The triangular shape and double‑sided design permit economical use by indexing the insert, while the cylindrical hole secures repeatable clamping and position. This modularity reduces inventory complexity and allows straightforward replacement without extensive re‑qualification of the toolholder system. Material and chip control explained for safe production The PVD coating provides a thin, hard surface layer that increases abrasion resistance and helps to preserve a sharp cutting edge, while the carbidesubstrate provides toughness to resist chipping. The included 0.4 mm corner radius balances edge strength with the ability to generate accurate profiles and acceptable surface finish. The double‑sided chipbreaker supports controlled chip formation across a range of steels and typical workshop materials, contributing to process stability and operator safety by reducing long, stringy chips. For application advice on Tungaloy turning inserts or to arrange supply of the TNMG160404 AH120, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will recommend the correct grade and holder combination for the process Technical data Article number: 6808390 SKU: 6808390-Tungaloy Manufacturer SKU: TUN6808390 Name: TNMG160404 AH120 Tungaloy insert Numbers Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° ISO designation: 160404 Special features Material: Carbide Coating/grade: PVD-coated AH120 Chipbreaker: Double-sided Hole: Cylindrical, with hole Shape: Triangular Application: Turning (external & internal) FAQ What materials is this insert suitable for? The TNMG160404 AH120 insert is designed for general turning and provides good performance across a broad range of steels and common workshop materials when the AH120 grade and chipbreaker are matched to the workpiece. Can the insert be indexed to use both sides? Yes, the triangular TNMG form is double‑sided and can be indexed to the unused cutting edges to extend tool life and lower tooling costs. What does the AH120 designation mean? AH120 identifies a Tungaloy grade pairing of substrate and PVD coating engineered for wear resistance and edge strength during turning operations where a sharp, reliable cutting edge is required. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius improves edge strength and helps achieve consistent surface finish while being small enough to maintain dimensional accuracy on typical turned profiles. Is the insert compatible with standard ISO holders? The insert conforms to ISO geometry; compatibility with holders depends on form, clearance angle, tolerance class, fastening and size — verify holder specifications to ensure correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH120 Wendeplatten - Tungaloy
Take advantage of a PVD-coated cemented carbide grade that delivers a sharp cutting edge and reliable process security for turning operations; combine this with the ISO TNMG 160404 geometry to ensure consistent indexing and quick replacement — order directly via Metav Werkzeuge or contact our technical consultants for application support. TNMG160404 AH120 indexable insert for turning — Tungaloy The TNMG160404 AH120 is a triangular ISO indexable insert designed for external and internal turning, offering a wear- and chip-resistant grade for stable cutting and reproducible results. PVD-coated cemented carbide AH120 ISO TNMG 160404 triangular insert 0.4 mm corner radius for fine finishes Double-sided with cylindrical hole Consistent edge life for continuous production The combination of a PVD-coated surface and cemented carbide substrate ensures a stable cutting edge that resists wear and chipping under typical turning loads. This results in fewer indexings and less downtime, supporting a steady production rhythm. The AH120 grade is formulated to balance toughness and hardness, providing process security when a sharp edge and repeatability are required. Geometry that simplifies clamping and accuracy The ISO TNMG 160404 triangular shape, a 60° included angle and a 0° relief clearance are optimised for reliable seating in standard holders. The insert’s cylindrical hole and specified 4.76 mm thickness provide secure clamping and repeatable positioning, which contributes to dimensional accuracy and reduces vibration in medium-stable set-ups. Correct holder selection enhances these geometric benefits and improves surface finish. Fine edge and surface quality from a small corner radius With a 0.4 mm corner radius the insert supports improved surface quality on external and internal profiles while maintaining controlled cutting forces. The modest radius is particularly effective where a fine finish is required without sacrificing tool life. When paired with the appropriate double-sided chipbreaker, this geometry helps produce consistent chip control and reduces the likelihood of built-up edge. Grade and chip control tailored to turning tasks The AH120 grade is a PVD-coated option optimised for wear resistance and reduced chipping during turning. The insert is suitable for a broad range of steels and common alloys when the correct chipbreaker and cutting parameters are selected. Choosing the right combination of grade, chipbreaker and machine stability converts material properties into measurable productivity gains and fewer interruptions. Contact Metav Werkzeuge for tailored holder recommendations and rapid supply of Tungaloy inserts — experts are available to advise on optimal chipbreaker and clamping solutions for specific turning applications. Technical data Article number: 6814902 Facts Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 AH120 Manufacturer SKU: TUN6814902 Thickness: 4.76 mm Size: 16 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Special features Material: cemented carbide Coating: PVD Grade: AH120 Shape: triangular, double-sided Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO holders, defined by form, relief, tolerance, fastening and size FAQ What materials can be machined with this insert? The AH120 PVD-coated cemented carbide insert is designed primarily for turning of steels and a broad range of common alloys when paired with the appropriate chipbreaker and cutting data; the TNMG160404 AH120 insert performs well where wear resistance and chip control are required. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps achieve finer surface finishes and controlled cutting forces; the combination of this radius with the AH120 grade reduces the risk of chipping while improving the finished part quality. Is the insert compatible with standard ISO holders? Yes, the ISO TNMG 160404 geometry and cylindrical hole are made for compatibility with standard ISO external holders and boring bars, with secure clamping ensured by matching form, tolerance class and fastening method. Can this insert be used on internal turning applications? The triangular form and double-sided design allow the insert to be used for both external and internal turning operations, provided machine rigidity and holder configuration are appropriate. What information identifies this exact item when ordering? Use the designation TNMG160404 AH120, manufacturer article number 6814902 and SKU 6814902-Tungaloy to ensure the correct PVD-coated insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com