TNMG 160404 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH120 grade and a 0.4 mm corner radius for precise, reliable turning performance; order the insert via Metav Werkzeuge or consult our specialists for application support. TNMG160404 AH120 Tungaloy indexable insert for turning — PVD-coated carbide, 0.4 mm radius The TNMG160404 AH120 Tungaloy insert is an ISO-standard triangular, double-sided indexable insert for external and internal turning, designed to deliver a sharp cutting edge and consistent process stability. PVD-coated carbide AH120 for wear resistance 0.4 mm corner radius for precise profiling Double-sided chipbreaker for extended life ISO TNMG 160404 with cylindrical hole Reliable edge life for consistent turning quality The combination of a PVD coating with the AH120 carbide composition provides a balanced resistance to abrasive wear and chipping while maintaining a sharp cutting edge. This results in predictable tool life and reduced scrap rates, which supports stable batch production. The 0.4 mm corner radius helps maintain profile accuracy on small features, and the coating assists in heat resistance during medium-duty turning, delivering repeatable component surface quality and fewer in-process interruptions. Faster set-up and secure clamping for less downtime Compatibility follows ISO conventions: the insert’s ISO 160404 geometry, 60° included angle and cylindrical hole make it straightforward to match with standard external holders and boring bars. The form, relief angle, tolerance class, fastening method, size and thickness determine holder compatibility, so correct pairing reduces set-up time and avoids clamping errors. Using an ISO-standard insert simplifies stocking and changeover, enabling quicker tool changes and higher machine uptime. Economical machining with a reversible geometry The triangular, double-sided design and integrated double-sided chipbreaker offer two usable cutting edges per face and multiple indexed positions, extending service life per insert and lowering cost-per-part. The robust PVD surface finish supports consistent cutting in varied turning tasks, while the insert’s geometry gives good edge stability under interrupted cuts. The overall effect is improved productivity and a more predictable machining process, particularly where a sharp edge and process reliability are required. Contact Metav Werkzeuge for application advice and stock information on the Tungaloy TNMG160404 AH120 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6812042 Manufacturer SKU: TUN6812042 Metav SKU: 6812042-Tungaloy Model series: ISO turning indexable inserts Grade: AH120 Coating: PVD Facts Geometry: TNMG160404 Corner radius: 0.4 mm Thickness: 4.76 mm Insert size: 16 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Special features Material: carbide Shape: triangular, double-sided Chipbreaker: double-sided Application: external and internal turning Compatible with ISO holders FAQ What cutting applications suit this insert best? The TNMG160404 AH120 insert is intended for turning operations where a sharp cutting edge and process security are required; its PVD-coated carbide construction supports reliable performance across typical external and internal turning tasks. Is the insert reversible and how many cutting edges are available? Yes — the triangular, double-sided design provides multiple usable edges; the TNMG160404 format yields efficient indexing and extended service life per insert. How is holder compatibility determined for this insert? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The ISO geometry of the TNMG160404 facilitates matching with standard external holders and boring bars. What are the key geometry specifications to check before fitting? Check the 0.4 mm corner radius, 4.76 mm thickness, 16 mm size and 60° included angle; ensure the holder accepts cylindrical-holed, ISO TNMG inserts to guarantee secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, PVD-coated carbide AH120 and a compact triangular geometry for reliable turning performance and easy tool indexing. Order the TNMG160404 AH120 directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH120 TNMG indexable turning insert — PVD-coated carbide, 60° triangle (Tungaloy) TNMG160404 AH120 is an ISO-design triangular indexable insert for turning, designed for applications that require a sharp edge and high process reliability ISO 60° triangular form with cylindrical hole PVD-coated carbide AH120 for wear resistance Double-sided chipbreaker for versatile turning 0.4 mm nose radius for medium-finishing cuts Consistent, economical performance for external and internal turning The PVD-coated carbide AH120 grade delivers a balance of wear resistance and edge toughness that supports uninterrupted production cycles. Its sharp cutting edge combined with a stable grade reduces flank wear and the risk of chipping, which prolongs edge life and lowers tool-change frequency. Designed as an ISO-standard insert, the geometry ensures repeatable seating and simple indexing in compatible holders, maintaining geometry accuracy across multiple repositions. This leads to tangible time savings in batch production and steady component quality. Geometry and dimensions that simplify setup and increase process security The triangular plate with a 60° included angle and a 0.4 mm nose radius provides a compromise between strength and surface finish. The insert thickness of 4.76 mm and inscribed circle of 16 mm pair with a cylindrical hole to ensure secure clamping in standard toolholders. A clearance angle of 0° and the double-sided chipbreaker design enable bidirectional use and predictable chip control in a range of turning operations. These defined measures support repeatable set-ups and stable cutting conditions, reducing setup time and scrap rates. Material suitability and practical application advice The grade is engineered for turning where a durable, sharp edge and process security are priorities. The double-sided chipbreaker supports consistent chip formation, while the PVD coating enhances thermal resistance and reduces adhesive wear during continuous cuts. Compatibility with holders is determined by insert form, relief angle, tolerance class, fixation, size and thickness; the typical system comprises the insert, an appropriate external holder or boring bar, a backing/locking set and replacement screws. For flexible workshop use, this insert is a pragmatic choice for medium to productive turning tasks. Contact Metav Werkzeuge today for application advice or to confirm stock and availability for the Tungaloy TNMG160404 AH120 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6810342 Manufacturer SKU: TUN6810342 SKU: 6810342-Tungaloy Manufacturer: Tungaloy Core specifications Inscribed circle: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 60° Relief/clearance angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Features & suitability PVD-coated carbide AH120 Wear- and breakage-resistant grade ISO-standard triangular indexable insert For external and internal turning System: insert + holder + backing/locking + screws FAQ What types of operations is this insert intended for? The TNMG160404 AH120 insert is intended for external and internal turning operations where a sharp cutting edge and process reliability are required. Which grade and coating does this insert use? This insert uses the AH120 grade with a PVD-coated carbide substrate for improved wear resistance and thermal stability. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker design, which offers consistent chip formation across common turning feeds and depths. What dimensions are relevant when checking holder compatibility? Key dimensions include the inscribed circle (16 mm), thickness (4.76 mm), nose radius (0.4 mm), included angle (60°) and the cylindrical hole—compatibility depends on form, relief angle, tolerance and fixation method. Is this an original Tungaloy product and where is it listed? The item is an original, brand-new Tungaloy indexable turning insert listed under article number 6810342 and Manufacturer SKU TUN6810342. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH120 carbide for reliable wear resistance, the ISO‑standard TNMG geometry for easy tool changeover, and the precise 0.4 mm corner radius for controlled cutting performance; order directly via Metav Werkzeuge or ask our consultants for application advice. TNMG160404 AH120 — Turning insert TNMG 160404 AH120 by Tungaloy TNMG160404 AH120 is an ISO‑standard turning insert designed for external and internal turning with a PVD‑coated carbide grade for stable, sharp cutting edges ISO‑standard TNMG 160404 geometry PVD-coated AH120 carbide grade Double-sided chipbreaker for consistency Triangular insert with 0.4 mm corner radius High process stability through advanced grade and coating The combination of a PVD‑coating and the AH120 carbide grade delivers a balance of wear resistance and edge stability that supports repeatable turning operations. The coating reduces adhesion and thermal wear at the cutting edge, which helps maintain a sharp cutting edge over longer tool life. The 0° clearance geometry and the specified corner radius work together to keep cutting forces predictable, so machining cycles remain consistent even when process windows are tight. Fast integration and secure clamping for efficient setup The ISO‑standard TNMG geometry and the triangular shape enable direct compatibility with a wide range of external holders and boring bars, reducing setup time and tooling complexity. The insert’s cylindrical hole and standard thickness provide reliable clamping and repeatable positioning in the seat, which lowers the risk of misalignment and downtime. These design factors translate into faster tool changes and fewer adjustment cycles on the shop floor. Controlled chip formation and application versatility A double-sided chipbreaker designed for turning ensures predictable chip flow and helps achieve a consistent surface finish with fewer interruptions for chip clearing. The 0.4 mm corner radius supports fine finishing passes while still allowing for stable roughing when the process requires it. This insert is recommended where a sharp edge and high process security are demanded, making it suitable for precision turning tasks that prioritise surface quality and reproducibility. Contact Metav Werkzeuge for tailored advice on integrating the TNMG160404 AH120 insert into existing toolholders or to request a quotation; Metav Werkzeuge can be reached at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 6854304 Manufacturer SKU: TUN6854304 SKU: 6854304-Tungaloy Designation: TNMG160404 AH120 Tungaloy insert Core specifications ISO code: 160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical, with hole Features & materials Material: Carbide Coating: PVD Grade: AH120 Chipbreaker: double-sided Shape: triangular Series: ISO turning indexable inserts Application: turning FAQ What machining tasks suit this insert best? The TNMG160404 AH120 turning insert is intended for external and internal turning where a sharp cutting edge and high process security are needed; it performs well in precision turning applications. Can this insert be used with standard ISO holders? Yes, the insert follows ISO‑standard TNMG geometry, so it fits compatible external holders and boring bars designed for TNMG‑type inserts. How does the AH120 grade affect tool life? The AH120 PVD‑coated carbide grade offers wear and breakage resistance, which improves edge life and helps maintain consistent performance over longer production runs. What are the key dimensions to check before fitting the insert? Confirm the insert size (16 mm), thickness (4.76 mm), corner radius (0.4 mm) and that the holder accepts a TNMG 160404 geometry with a cylindrical hole. Is the chip control suitable for finishing passes? The double‑sided chipbreaker provides controlled chip formation and supports consistent surface finish, making the insert suitable for finishing in many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of process security, durable PVD-coated carbide and fast indexability for continuous turning operations. The compact triangular geometry with a 0.4 mm corner radius and 60° cutting angle delivers stable cutting forces and predictable chip control; order via Metav Werkzeuge or consult the technical team for compatibility advice. TNMG160404 AH120 ISO turning insert for Turning — PVD-coated carbide, 0.4 mm radius (Tungaloy) The TNMG160404 AH120 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a sharp cutting edge and enhanced process stability for general turning applications. ISO triangular insert TNMG 160404 PVD-coated carbide AH120 for wear resistance Double-sided chipbreaker for process security 0.4 mm corner radius, 60° cutting angle Consistent performance and longer tool life The TNMG160404 AH120 insert combines a PVD‑coated carbide substrate with a wear- and fracture-resistant grade to maintain a sharp cutting edge under demanding conditions. The AH120 grade is engineered to balance flank wear resistance and edge toughness, resulting in a predictable tool life that supports batch production and short-cycle machining. Together with the double-sided chipbreaker, this construction ensures controlled chip formation and reduced rework, which helps maintain part tolerances and decreases downtime in serial turning operations. Quick integration and predictable set‑up As an ISO standard insert, compatibility with toolholders depends on form, relief angle, tolerance class, mounting and thickness rather than proprietary interfaces. The triangular shape with a cylindrical hole and 60° geometry enables straightforward clamping in many common external holders and boring bars. The 4.76 mm thickness provides increased rigidity for interrupted cuts, while the 0° relief angle specification supports a secure fit and consistent seating. These characteristics reduce set‑up iterations and make the insert a practical choice for workshops that require rapid tool changes and reproducible machining results. Application fit and machining advantages Designed primarily for turning, the insert performs well where a sharp edge and stable process are required. The 0.4 mm corner radius offers a compromise between edge strength and surface finish: it reduces the risk of edge chipping on heavy cuts while still allowing acceptable surface quality on finishing passes. The PVD coating improves resistance to adhesive and abrasive wear, increasing the interval between indexings. For operations that demand repeatability and efficient chip evacuation, this configuration supports both roughing and medium finishing tasks with reduced risk of unexpected tool failure. For efficient and reliable turning with Tungaloy’s AH120 grade, contact Metav Werkzeuge for tailored holder recommendations and immediate availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6812046 SKU: 6812046-Tungaloy Manufacturer SKU: TUN6812046 Model series: ISO-Drehwendeschneidplatten Product name: TNMG160404 AH120 Tungaloy-Wendeplatte Dimensions & geometry Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Materials & features Material: Carbide Coating: PVD Grade: AH120 Shape: Triangular Hole: Cylindrical hole Chipbreaker: Double-sided ISO designation: TNMG160404 Application: Turning FAQ What is the primary application of this insert? The TNMG160404 AH120 insert from Tungaloy is intended for external and internal turning operations where a sharp cutting edge and reliable process stability are required. Which holder types are compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, mounting, size and thickness; the TNMG160404 fits standard ISO triangular holders and many common boring bars with a cylindrical‑hole clamping interface. How does the AH120 grade affect machining? The AH120 grade offers a balanced combination of wear resistance and edge toughness, improving tool life and reducing the likelihood of edge chipping during general turning tasks. What benefits does the PVD coating provide? The PVD‑coated carbide surface enhances resistance to adhesive and abrasive wear, supports higher process reliability and contributes to longer intervals between indexings. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius increases edge strength for heavier cuts while still allowing a reasonable surface finish, offering a versatile compromise for mixed roughing and finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, material versatility and economical edge usage for uninterrupted turning operations; the PVD-coated carbide grade AH6225 ensures a sharp yet stable cutting edge, while the ISO triangular geometry delivers flexible indexing options. Order the TNMG160404 AH6225 turning insert directly via Metav Werkzeuge or consult the technical team if further process data are required. TNMG160404 AH6225 TNMG turning insert — PVD-coated carbide, 60° triangle (Tungaloy) The TNMG160404 AH6225 is a triangular ISO turning insert engineered for general external and internal turning, offering a balance of edge sharpness and stability for medium machining of stainless steels PVD-coated universal carbide grade AH6225 Sharp, stable cutting edge for medium cuts Double-sided chipbreaker for consistent chips ISO 60° triangle with cylindrical hole Reliable cutting performance for stainless steels The AH6225 grade combines a PVD-coated surface with a wear-resistant carbide substrate to extend edge life under varying conditions. This universal grade is optimised for stainless steels, giving a sharp yet stable cutting edge that reduces built-up edge formation and improves process stability during medium-duty turning. The coating reduces friction at the tool–workpiece interface, which helps to maintain dimensional accuracy and surface finish over multiple indexed edges, translating to fewer tool changes and higher productivity. Consistent chip control and machining stability A double-sided chipbreaker ensures predictable chip formation across a range of cutting parameters, improving swarf evacuation and reducing the risk of surface damage. The 60° triangle geometry provides three usable cutting edges per side and a compact footprint for external and internal operations. The insert’s cylindrical hole and ISO form ensure reliable clamping in standard holders; correct matching of holder form, clearance angle, tolerance class, fastening and thickness is essential for optimal performance and safety in the machining set-up. Efficient indexable system for day-to-day turning As an indexable insert, this item supports rapid edge changes and cost-efficient use of the insert body: multiple edges per insert lower cost per cutting edge and limit machine downtime. The grade’s balance between edge sharpness and toughness is particularly suited to varied workshop conditions where material batches and cutting data change frequently. Combined with a compatible external holder and correct chipbreaker selection, the insert contributes to a productive, repeatable turning process with consistent surface quality and tool life stability. Tungaloy’s manufacturing standards support predictable performance across shifts and batches. For a tailored recommendation on using the AH6225 grade in specific stainless steel alloys and to check current stock, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — procurement and application advice is available from the Metav Werkzeuge team Technical Data Article number: 6947416 Manufacturer SKU: TUN6947416 SKU: 6947416-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry: 60° Corner radius: 0.4 mm Relief angle: 0° Plate size: 16 mm ISO designation: 160404 Special features Material: Hartmetall Grade/coating: AH6225 (PVD) Chipbreaker: double-sided Hole: with cylindrical hole Plate shape: triangular Application: turning Compatibility: ISO turning insert system FAQ Is this insert suitable for machining stainless steels? Yes. The TNMG160404 AH6225 insert uses a PVD-coated carbide grade optimised for stainless steels and provides a balance of sharpness and edge stability suited to medium turning operations. How many cutting edges are available per insert? The triangular TNMG geometry offers three edges per side; with the double-sided format this provides multiple indexable edges to reduce cost per cutting edge. What does the AH6225 designation indicate? AH6225 denotes a PVD-coated universal grade from Tungaloy that is designed for versatile performance on stainless steels, combining wear resistance with a stable cutting edge. Does the cylindrical hole affect clamping? The cylindrical hole ensures reliable seating and clamping in compatible ISO holders; correct holder matching (form, clearance angle and tolerance) is necessary for secure fastening and repeatable results. Can this insert be used for both external and internal turning? Yes. The triangular form and standard ISO dimensions make the insert suitable for both external and internal turning, provided a suitable holder or boring bar is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Combining a PVD‑coated carbide grade AH6225 with a sharp yet robust cutting edge and ISO‑compliant triangular geometry, this insert delivers dependable performance for rostfreier Stahl turning. Order the TNMG160404 AH6225 Tungaloy turning insert directly via Metav Werkzeuge or consult the technical team for application support. TNMG160404 AH6225 Tungaloy turning insert — PVD‑coated carbide, 60° triangle The TNMG160404 AH6225 is an ISO‑standard triangular turning insert engineered for universal use in medium‑range machining of rostfreier Stahl. PVD-coated carbide for long tool life Universal grade for rostfreier Stahl 60° triangle, 0.4 mm corner radius Cylindrical hole with double-sided chipbreaker Reliable cutting performance for rostfreier Stahl The TNMG160404 insert is delivered in AH6225, a PVD‑coated carbide grade designed as a universal solution for rostfreier Stahl. The combination of a sharp yet stable cutting edge and a wear‑resistant coating reduces flank wear and maintains dimensional accuracy across interrupted cuts and variable cutting conditions. For production environments where tool changes influence throughput, this balance of edge strength and abrasion resistance supports consistent component quality and longer tool intervals, helping to lower process costs while preserving surface finish. Geometry engineered for secure clamping and chip control A triangular plate with a 60° included angle and a 0.4 mm corner radius provides a predictable contact geometry that is compatible with a wide range of external holders. The cylindrical hole and standard ISO form permit reliable clamping; compatibility depends on holder form, rake angle, tolerance class, fastening, size and thickness. The integrated double‑sided chipbreaker promotes controlled chip formation during turning, which reduces the risk of entanglement and supports efficient swarf evacuation. For less experienced users, a brief explanation: a chipbreaker reshapes the chip so it fractures or curls away, protecting the workpiece and reducing spindle load. Designed for efficient production and consistent results Built to ISO dimensions, this cutting insert is intended to contribute to stable production cycles and reproducible outcomes. The PVD coating improves resistance to adhesion and thermal degradation, which is particularly relevant when machining rostfreier Stahl at moderate cutting speeds. The insert’s balanced properties support predictable tool life and reduce unexpected stoppages; in process terms, this translates into higher overall equipment effectiveness. Where economic arguments are required, the use of a universal grade often reduces the need for multiple specialised grades, simplifying inventory management. Practical system guidance for selection and setup The insert functions as part of a system: an ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement screws form the complete assembly. Selection of the correct chipbreaker and grade should be based on workpiece material, machining type and setup rigidity. For unstable setups, a more robust grade or reduced cutting parameter is advisable; for stable, high‑precision turning the combination of small corner radius and sharp geometry supports fine surface finishes. When compatibility questions arise, check holder geometry against the insert’s form and thickness; the tolerance class and fastening method determine seating accuracy. For application advice and ordering of Tungaloy AH6225 inserts, contact Metav Werkzeuge for tailored recommendations: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6890647 Manufacturer SKU: TUN6890647 Label/SKU: 6890647-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Angle: 60° Corner radius: 0.4 mm Insert size: 16 mm Plate thickness: 4.76 mm Free angle: 0° Special features Material: carbide (Hartmetall) Coating: PVD Grade: AH6225 Plate shape: triangular Hole style: cylindrical hole Chipbreaker: double-sided Suitable application: turning FAQ Which materials is this insert suitable for? The TNMG160404 AH6225 Tungaloy turning insert is specified as a universal grade for rostfreier Stahl and performs well in medium machining operations on such materials. What are the key geometry specifications of the insert? The insert features a 60° triangular form, a 0.4 mm corner radius and a cylindrical hole; these dimensions follow ISO standards for TNMG‑type turning inserts. How does the AH6225 grade improve machining performance? The AH6225 grade combines a PVD‑coated carbide substrate with a cutting geometry that balances sharpness and edge stability, reducing wear and improving consistency during rostfreier Stahl turning. What should be checked for holder compatibility? Compatibility is determined by holder form, rake angle, tolerance class, fastening method, size and plate thickness; ensure the external holder matches the TNMG160404 dimensions and clamping style. Which system components are required for correct assembly? A complete system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws matched to the holder and insert geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD‑coated carbide grade and the precise 0.4 mm nose radius for consistent mid‑range turning performance; the combination of a 60° geometry and double‑sided chipbreaker supports reliable chip control and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the team for application‑specific advice. TNMG 160404 AH6225 Turning insert (TNMG160404) by Tungaloy — PVD‑coated carbide, 60° TNMG160404 AH6225 is an ISO‑standard indexable turning insert designed for general turning of stainless steels and mixed turning tasks, offering a balance of sharpness and edge stability for varied production conditions. PVD‑coated carbide for stainless steel machining 60° geometry for versatile turning operations 0.4 mm nose radius for improved surface finish High‑performance cutting for consistent mid‑range turning The insert combines a PVD‑coated carbide substrate with the AH6225 grade, tailored for machining stainless steels under changing conditions. This pairing provides a stable cutting edge that resists built‑up edge and maintains dimensional accuracy over longer series, which translates into fewer index changes and steadier cycle times. The 0.4 mm nose radius contributes to a smoother surface finish while retaining sufficient edge strength for interrupted cuts or variable feed. For operations where consistent results are required across different batches, the insert’s geometry helps to reduce process variability and supports efficient tool planning. Secure compatibility and ease of integration in production setups Designed to the ISO turning insert standard, the triangular form and 60° approach angle mean the insert integrates with common external holders and boring bars; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The centrally positioned cylindrical hole and the specified thickness of 4.76 mm ensure positive clamping and repeatable seating in compatible toolholders. Using an ISO‑matched holder keeps clamping forces predictable and minimises vibration, which directly benefits surface finish and tool life. Clear labelling and ISO designation simplify inventory management in mixed‑brand toolrooms. Predictable chip control and operational durability The insert’s double‑sided chipbreaker geometry supports controlled chip formation for typical turning feeds and mid‑range cutting speeds, reducing frequent interruptions and helping maintain machine uptime. The AH6225 PVD layer improves resistance to flank wear and thermal softening, offering steady performance across batch runs without excessive edge degradation. In practice, this means fewer tool changes, more consistent component quality and improved overall process economy. For manufacturers seeking a practical balance between cutting efficiency and reliability, the insert offers a robust solution that aligns with standard workshop workflows. Contact Metav Werkzeuge for application advice, toolholder compatibility checks or to request the Tungaloy TNMG 160404 AH6225 insert for immediate dispatch Technical data Article number: 6796312 Manufacturer SKU: TUN6796312 SKU: 6796312-Tungaloy Model series: ISO turning indexable inserts Material: carbide Measurements & geometry ISO designation: 160404 Shape: triangular Thickness: 4.76 mm Inscribed circle / size: 16 mm Nose radius: 0.4 mm Approach angle: 60° Clearance angle: 0° Materials & features Grade/coating: AH6225, PVD‑coated Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: turning (external and internal) Compatibility note: fit determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for turning stainless steels? The AH6225 grade with PVD coating is formulated for machining stainless steels; the TNMG160404 insert provides a balanced combination of sharpness and edge stability for mid‑range turning tasks. How many usable cutting edges are available on this insert? The triangular, double‑sided design offers multiple usable cutting edges; rotating and indexing extend total edge life before replacement is required. Does the insert require a specific holder type? The insert is ISO‑conforming; secure and repeatable performance depends on matching holder form, clearance angle, tolerance class, fastening and size to the insert’s specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and ISO‑standard geometry for consistent productivity in stainless steel turning; order directly via Metav Werkzeuge or consult the team for application advice and availability. TNMG 160404 AH6225 indexable turning insert — PVD‑coated carbide, 60° triangular (Tungaloy) A TNMG 160404 AH6225 insert engineered for external and internal turning, offering a sharp, stable edge for medium machining of stainless steel with ISO compatibility and a 60° triangular form. TNMG 160404 ISO triangular 60° geometry PVD-coated carbide AH6225 for stainless steel Double-sided insert with cylindrical hole Stable cutting edge for medium machining Consistent performance on stainless steel with PVD‑coated carbide The combination of the AH6225 grade and a PVD‑coated carbide substrate delivers a balance between edge sharpness and wear resistance ideal for a range of stainless steel applications. The coating reduces adhesion and improves thermal stability, which helps maintain a sharp cutting edge under changing cut conditions; the result is more consistent surface finish and predictable tool life. For medium machining, this translates into reliable chip formation and fewer unscheduled tool changes, improving process stability. Predictable fit and repeatable geometry in ISO tool systems The triangular 60° shape with a 0.4 mm corner radius and a 0° clearance angle provides a predictable engagement and a defined contact geometry with the workpiece. Compatibility with holders is governed by form, clearance angle, tolerance class, fastening, size and thickness; the insert’s ISO designation and the presence of a cylindrical hole simplify selection of the correct clamping system. A standardised fit enables repeatable seating and indexing, which supports consistent part quality across consecutive tool changes. Economic machining through double‑sided design and clear system integration This insert is double‑sided, offering two usable cutting edges per side where applicable, which reduces tooling cost per edge and shortens tool change frequency. The insert sits within a modular system that typically includes a matching outer holder, shim or clamp set, and replacement fixing screws; this system approach ensures secure clamping and safe performance at recommended cutting parameters. Selecting the appropriate chipbreaker and grade for the material and machine stability will further enhance productivity and reduce cycle time. For demanding stainless steel turning tasks, choose the Tungaloy AH6225 grade and contact Metav Werkzeuge for tailored technical guidance or to request availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947335 Manufacturer SKU: TUN6947335 SKU: 6947335-Tungaloy Material: Carbide Model series: ISO turning inserts Designation: TNMG 160404 Facts Thickness: 4.76 mm Size: 16 mm Corner radius: 0.4 mm Angle: 60° Clearance angle: 0° Special features Grade/coating: AH6225, PVD‑coated carbide Plate shape: triangular Hole: with hole — cylindrical hole Double-sided chipbreaker Application: turning (external and internal) Compatibility: fit determined by form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert suited for? The AH6225 grade is designed primarily for stainless steel applications; the TNMG 160404 insert performs well in medium machining of such materials. How does the PVD coating benefit cutting performance? The PVD‑coated carbide reduces adhesion and increases thermal resistance, which helps preserve the cutting edge and improve surface finish under varying cutting conditions. Can the insert be used on both sides before disposal? Yes, the double‑sided design provides additional cutting edges, allowing rotation or indexing to a fresh edge to extend usable life. What determines compatibility with a holder? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct seating and clamping. Is the TNMG 160404 suitable for internal turning operations? The TNMG 160404 format and geometry are suitable for both external and internal turning, provided a compatible toolholder and the correct chipbreaker are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
High process reliability through a sharp, stable cutting edge and a PVD-coated carbide grade designed for stainless-steel turning; order the TNMG160404 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404 AH6225 — Tungaloy ISO turning insert, PVD-coated, 60° triangular The TNMG160404 AH6225 is an ISO triangular indexable insert engineered for external and internal turning, offering a balanced combination of sharpness and edge security for medium machining of stainless steels. PVD-coated carbide grade AH6225 Universal for stainless steels Two-sided chipbreaker for stability 60° triangular insert with 0.4 mm radius Consistent cutting performance for stainless-steel turning The combination of the AH6225 grade and a PVD coating provides a measurable benefit in mixed and interrupted turning conditions: a sharp cutting edge that still resists wear under variable loads. As a consequence, the indexable insert achieves repeatable component surfaces and longer intervals between tool changes, which supports higher machine uptime and lower per-part tooling costs. The manufactured carbide substrate delivers the substrate hardness required for medium cutting depths, while the coating reduces adhesive wear when machining stainless steels, so process stability and economy improve in series operations. Straightforward compatibility with ISO holders to simplify setup This insert follows the ISO designation and geometric norms, so compatibility is determined by form, relief angle, tolerance class, fixation, size and thickness. The triangular 60° shape with a corner radius 0.4 mm and a 0° relief angle matches common ISO toolholders and boring bars, helping to avoid setup uncertainty. The presence of a cylindrical hole enables secure clamping and accurate repeatability when changing edges. For workshops standardising on ISO tooling, the insert reduces variant complexity and shortens fixture preparation time, improving throughput in mixed-production environments. Robust geometry and chip control for reliable results A two-sided chipbreaker design manages swarf formation effectively during medium turning passes, promoting stable chip evacuation and consistent cutting forces. The engineered chip geometry supports predictable behaviour across varying feeds, which is particularly helpful when turning bars with differing stability. The insert’s balanced edge preparation delivers a compromise between initial sharpness and sustained edge life, making it suitable where occasional interruptions or changes in cutting conditions occur. Clear understanding of the chipbreaker function helps set feeds and depths conservatively at first and optimise for productivity as process confidence grows. Recommended uses and practical guidance for workshop integration Designed for turning applications, the insert is best used in external and internal operations on stainless steels, selecting the chipbreaker and grade to match component geometry and machine rigidity. For softer workpieces or highly stable setups, larger corner radii and more aggressive feeds can be considered; for slender workpieces or finish passes, maintain conservative feeds to protect the edge. If uncertainty remains about holder compatibility or machining parameters, Metav Werkzeuge provides application advice and can assist with tooling selection to ensure the insert performs efficiently within existing workflows. Contact Metav Werkzeuge for tailored application advice on the Tungaloy TNMG160404 AH6225 insert and to arrange supply through their consultancy service. Technical data Article number: 6827567 SKU manufacturer: TUN6827567 SKU: 6827567-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 AH6225 Facts ISO code: 160404 Insert size: 16 Angle: 60° Corner radius: 0.4 mm Relief angle: 0° Special features Material: carbide Grade: AH6225 Coating: PVD Shape: triangular Hole: cylindrical hole Chipbreaker: two-sided FAQ What materials is the insert suitable for? The TNMG160404 AH6225 insert is formulated as a universal grade for stainless steels, offering reliable performance in medium turning applications. Is the insert compatible with standard ISO holders? Yes, the TNMG160404 designation corresponds to ISO geometry; compatibility is determined by form, relief angle, tolerance class, fixation, size and thickness. How many usable edges does the insert have? The triangular insert offers multiple indexing positions; the two-sided chipbreaker supports repeated indexing while maintaining chip control. Can the insert be used for finishing passes? The AH6225 grade provides a balance between sharpness and edge strength; for fine surface finishes, use conservative feeds and the 0.4 mm corner radius to reduce vibration. What does the chipbreaker design achieve? The two-sided chipbreaker improves chip control and evacuation during medium turning, resulting in steadier cutting forces and more predictable surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade optimised for stainless steel with a 0.4 mm corner radius and triangular form ensures reliable, repeatable performance in medium turning operations; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG 160404 AH6225 indexable turning insert – PVD-coated carbide, 0.4 mm radius (Tungaloy) TNMG160404 AH6225 is a triangular indexable insert for external and internal turning, designed for medium machining of stainless steel with a sharp yet stable cutting edge. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Triangular 16 mm size, 0.4 mm corner radius Double-sided chipbreaker with cylindrical hole High-performance cutting for stainless steel with longer tool life The insert combines a PVD-coated surface with a carbide substrate in grade AH6225, providing a balance between a sharp cutting edge and edge stability for variable conditions. The PVD-coated layer increases wear resistance and reduces built-up edge, which is particularly important when machining stainless steel, where workhardening and adhesion commonly shorten tool life. This configuration supports higher cutting speeds and more consistent part quality, resulting in improved cycle times and lower cost per component over medium production runs. Precision geometry for consistent surface finish and repeatability Designed with a 60° included angle and a 0.4 mm corner radius, the geometry of the insert delivers predictable cutting forces and a consistent surface finish on turned components. The triangular 16 mm format permits indexable use on both sides, while the thickness of 4.76 mm contributes to rigidity and vibration damping in marginally stable set-ups. The insert’s 0° clearance angle and ISO-compliant form mean compatibility depends on matching the holder’s form, tolerance class, fastening and size; when matched correctly, the result is reproducible positioning and repeatable machining results across batches. Simple integration and economical machining for the workshop As a double-sided indexable insert with a cylindrical hole, the component is straightforward to clamp in standard ISO holders and boring bars; the system typically comprises the insert, a matched external holder or boring bar, a support/locking set and replacement screws. The double-sided chipbreaker reduces downtime, since the insert can be rotated to a fresh edge, and the PVD-coated surface helps maintain edge integrity across interrupted and continuous cuts. The outcome is enhanced productivity and predictable tool-change intervals, supporting leaner tool inventories and steadier production flow. For application advice on Tungaloy turning inserts such as the TNMG160404 AH6225 and to place an order or request technical clarification, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical details Article number: 6827239 Manufacturer SKU: TUN6827239 Material: carbide Model series: ISO turning indexable inserts Numbers Corner radius: 0.4 mm Included angle: 60° Thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Design & features Grade/coating: AH6225, PVD-coated carbide Shape: triangular, double-sided Hole style: with cylindrical hole Chipbreaker: double-sided Application: turning (external & internal) Compatibility: ISO-compliant insert; holder compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TNMG160404 AH6225 insert is formulated primarily for machining stainless steel, providing a good balance of edge sharpness and wear resistance for medium turning operations. Is the insert reversible and how many cutting edges are available? The insert is double-sided and triangular, offering multiple usable cutting edges to extend tool life before replacement. What does the 0.4 mm corner radius mean for component finish? A 0.4 mm radius helps achieve a compromise between edge strength and surface finish; smaller radii generate finer finishes, while this radius adds robustness for stability in medium cuts. Which holders are compatible with this ISO insert? Compatibility requires a holder matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; when these parameters align, standard ISO external holders or boring bars are suitable. What are the article and SKU numbers for ordering? Article number 6827239 and manufacturer SKU TUN6827239 identify this Tungaloy indexable insert for procurement and inventory. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the Tungaloy AH6225 grade for reliable stainless‑steel machining, combining a sharp, stable cutting edge with a universal PVD‑coated carbide for consistent performance; order via Metav Werkzeuge or contact our specialists for application advice. TNMG160404 AH6225 turning insert (ISO triangle, PVD‑coated carbide) A PVD‑coated TNMG160404 AH6225 ISO triangular insert for external and internal turning, designed as a universal grade for machining stainless steels under medium cutting conditions. ISO triangular TNMG form with 60° geometry PVD‑coated carbide grade AH6225 for stainless steels Double‑sided chipbreaker with cylindrical hole 0.4 mm corner radius for stable edge strength Consistent performance for stainless‑steel turning The PVD‑coated carbide grade AH6225 delivers a combination of a sharp cutting edge and robust edge stability that suits varying production conditions. The geometry with a 60° cutting angle and a 0.4 mm corner radius helps maintain dimensional stability and surface quality during medium machining. For operations where repeatability matters, this insert reduces the need for frequent rework by offering predictable wear behaviour and improved tool life compared with uncoated grades. Universal compatibility and efficient corner indexing Manufactured to ISO dimensions, the triangular TNMG form ensures straightforward compatibility with standard external holders and boring bars; compatibility is defined by relief angle, tolerance class, fixing method, size and thickness. The double‑sided design with a cylindrical hole allows efficient indexing, providing cost‑effective use of each plate and minimising tool change downtime. With a plate thickness of 4.76 mm and size 16, the insert suits a wide range of clamping systems and is particularly effective where stable clamping and good chip control are required. Practical machining guidance for reliable results Select the chipbreaker and grade to match workpiece stability and the specific stainless‑steel alloy to avoid work hardening. For the best surface finish and tool life, favour steady feeds, moderate depths of cut and a stable setup; the PVD layer on the AH6225 grade assists in thermal resistance and consistent cutting performance. The system typically comprises the ISO insert plus a matching holder, shims/clamping set and fastening screws, enabling a reproducible assembly that supports high productivity and reduced scrap rates. For reliable machining with the Tungaloy AH6225 grade and to discuss holder compatibility or availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and ordering. Technical data Article number: 6947387 Manufacturer SKU: TUN6947387 Model series: ISO‑turning indexable inserts Designation: TNMG160404 AH6225 Material: Carbide Coating: PVD Numbers / Core technical data Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Size: 16 Designs / Special features Triangular insert form (three‑edged) Double‑sided chipbreaker Cylindrical hole for fastening Universal grade for stainless steels Intended for external and internal turning FAQ Is this insert suitable for stainless‑steel turning? Yes. The TNMG160404 AH6225 is formulated as a universal PVD‑coated carbide grade for stainless steels, optimised for stable edge condition and medium machining. How does the double‑sided design affect tooling costs? The double‑sided TNMG geometry allows multiple indexings, improving cost efficiency by providing more usable cutting edges per plate before disposal. Which chipbreaker should be chosen for unstable set‑ups? For less rigid set‑ups, select a chipbreaker and a more stable cutting configuration to improve chip control; the AH6225 grade supports good performance under varying conditions. Will the insert fit standard TNMG holders? The insert conforms to ISO TNMG dimensions; fit depends on holder form, fixing method, tolerance class, size and thickness, so verify holder compatibility before ordering. What system components are recommended with the insert? A compatible external holder or boring bar, appropriate shims/clamping set and replacement screws form the recommended system for reliable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
The PVD‑coated carbide grade AH6225 delivers a sharp yet durable cutting edge and broad suitability for rostfreier Stahl; combined with ISO TNMG 160404 geometry and a 60° cutting angle this insert supports reliable medium turning operations. Order the TNMG160404 AH6225 directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6225 — Turning insert by Tungaloy, PVD‑coated carbide, 60° TNMG160404 AH6225 is a triangular ISO turning insert designed for external and internal turning in variable production conditions PVD‑coated carbide grade AH6225 ISO TNMG 160404 form with 60° cutting angle 0.4 mm corner radius for general turning Double‑sided chipbreaker with cylindrical hole Consistent medium‑duty performance for rostfreier Stahl The PVD‑coated carbide cutting grade AH6225 was developed for a balance of edge sharpness and robustness in medium machining. Its geometry offers a 60° approach suited to general turning tasks where surface quality and consistent tool life matter. Thanks to the combination of coating and substrate, the insert maintains a stable cutting edge under variable conditions, reducing unplanned tool changes and supporting predictable cycle times. Easy integration into ISO tool systems The insert follows the ISO TNMG 160404 standard, which simplifies selection for compatible holders and boring bars. Compatibility depends on form, clearance angle (0°), tolerance class, fastening, size (16 mm) and thickness (4.76 mm), and the plate comes with a cylindrical hole for secure clamping. This standardisation enables straightforward replacement and inventory management within established turning tool systems. Improved chip control and process reliability A double‑sided chipbreaker promotes effective chip formation and evacuation, contributing to more consistent surface finishes and lower rework rates. The PVD layer increases wear resistance and thermal stability compared with uncoated grades, extending useful life under interrupted cuts or mixed batches. For operations aiming at higher productivity, this translates into fewer tool interventions and steadier output quality. Practical system advice for trouble‑free turning Typical setups include the ISO insert, a suitable external holder or boring bar, and the correct shim/clamping set with spare screws. The cutting edge radius of 0.4 mm suits general turning; for heavy roughing or precision finishing, select a different radius or chipbreaker adapted to the workpiece rigidity. The insert works well for both external and internal turning when paired with a holder matched to its ISO form and dimensions. Contact Metav Werkzeuge for application advice or to order the TNMG160404 AH6225 insert; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6947403 Manufacturer SKU: TUN6947403 SKU: 6947403-Tungaloy Label: TNMG160404 AH6225 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Core specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Clearance angle: 0° Features and applications Grade: AH6225 Coating: PVD Cutting material: carbide Plate form: triangular Hole style: cylindrical hole Chipbreaker: double‑sided Application: Turning (external and internal) Model series: ISO turning inserts Typical use: rostfreier Stahl FAQ Which materials are best machined with this insert? The TNMG160404 AH6225 insert is optimised for rostfreier Stahl; its PVD‑coated carbide composition also provides versatility across other medium‑duty stainless steel turning applications. How is the insert mounted and can it be indexed? The TNMG160404 form features a standard ISO shape with a cylindrical hole for positive clamping; the insert is double‑sided and can be indexed according to the holder’s instructions to extend usable life. What are the key benefits of the AH6225 PVD coating? PVD coating on the AH6225 grade increases wear resistance and thermal stability, improving tool life and surface finish consistency during medium turning operations. How to ensure compatibility with an existing holder? Compatibility is determined by insert form, clearance angle (0°), tolerance class, fastening method, size and thickness; check these dimensions against the holder specification before fitting the TNMG160404 AH6225 insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Taking advantage of a PVD-coated carbide grade (AH6225) and a 60° TNMG triangular geometry yields a dependable combination of sharp cutting performance and robust edge stability for medium turning operations on stainless steel; order the TNMG 160404 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6225 — Tungaloy indexable turning insert for ISO turning The TNMG 160404 AH6225 is an ISO-spec triangular indexable insert designed for general-purpose external and internal turning; optimised for stainless steel and variable cutting conditions. PVD-coated universal grade AH6225 Optimised for stainless steel machining 60° triangular form TNMG geometry 0.4 mm corner radius for improved finish Double-sided chipbreaker, cylindrical hole fixing High-performance turning where stability matters The combination of a PVD-coated surface and carbide substrate delivers a balance between wear resistance and a keen cutting edge suited to medium-duty operations. The AH6225 grade is formulated as a universal option for machining stainless steel, offering reliable edge stability under changing cutting conditions. The coated surface reduces built-up edge and improves thermal resistance, which translates into more consistent tool life and predictable process windows. For production environments that prioritise throughput and repeatability, this insert supports steady cycle times and reduced scrap rates. Practical benefits on the toolholder and workpiece The TNMG triangular geometry with a 60° included angle offers versatile engagement on common external and internal turning toolholders. The 0.4 mm corner radius contributes to a fine surface finish while maintaining sufficient edge strength for medium roughing and finishing passes. The insert is double-sided and features a cylindrical hole for secure clamping, enabling rapid re-indexing and economical use of cutting edges. This reduces tooling costs per machined part and simplifies inventory management, as a single ISO insert form can cover multiple turning tasks when combined with the appropriate chipbreaker and grade. Choosing and matching the insert for reliable results Compatibility to a chosen holder is governed by factors such as insert form, clearance angle (0°), tolerance class, fastening method, size and thickness, all of which align with ISO standards. Select the double-sided chipbreaker variant and match the AH6225 grade to the workpiece and machine rigidity to achieve optimal chip control and surface quality. The ISO designation and standardised dimensions make it straightforward to replace worn inserts without extensive setup changes. Where stability is limited, favour conservative cutting parameters and the chipbreaker that best suits the material and depth of cut. For reliable stainless steel turning with Tungaloy AH6225, contact Metav Werkzeuge for order support and technical consultation via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6947364 Manufacturer article number: 6947364 Manufacturer SKU: TUN6947364 SKU: 6947364-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Special features Grade / coating: AH6225 (PVD-coated) Material: carbide Shape: triangular, with cylindrical hole Double-sided chipbreaker Clearance angle: 0° Application: turning ISO designation: TNMG160404 Hole style: cylindrical FAQ What machining tasks is this insert suited for? The TNMG 160404 AH6225 insert is intended for external and internal turning operations, offering a universal solution especially for stainless steel where a stable, sharp edge is required. How does the AH6225 grade perform on stainless steel? AH6225 provides a PVD-enhanced wear resistance that helps control built-up edge and maintain a strong cutting edge during medium-duty machining of stainless steel, giving repeatable surface quality. Can the insert be re-indexed to use multiple edges? Yes, the double-sided TNMG design and the cylindrical hole for secure fixing permit re-indexing to access additional cutting edges, improving cost efficiency per edge. Which holders are compatible with this TNMG insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; matching ISO TNMG specifications ensures a proper fit and secure clamping. Why choose a PVD coating for this application? A PVD-coated surface enhances thermal and abrasive resistance, reducing adhesion and wear when machining challenging materials such as stainless steel, which supports longer tool life and steadier performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide durability, a 0.4 mm nose radius for precise finishing and ISO-standard triangular geometry for broad holder compatibility. Order the TNMG160404 AH6225 insert directly via Metav Werkzeuge or consult their specialists for selection support. TNMG160404 AH6225 Tungaloy turning insert — PVD-coated carbide, 0.4 mm radius The TNMG160404 AH6225 is an ISO-standard triangular turning insert designed for external and internal turning, engineered for stable cutting performance on stainless steels. PVD-coated carbide for increased wear resistance Universal grade optimised for stainless steels 0.4 mm nose radius for precise contouring Double-sided insert with cylindrical hole ISO TNMG form, 60° triangle geometry Consistent tool life through PVD-coated carbide technology The AH6225 grade combines a PVD-coated surface with a carbide substrate to deliver improved wear resistance and thermal stability in interrupted and continuous cuts. This coating reduces adhesive wear and helps maintain a stable cutting edge, which in turn supports longer unattended runs and fewer indexings. For production environments where repeatability matters, the coated substrate translates into predictable component quality and reduced process variation. Geometry for repeatable finishes and economical indexing The triangular 60° form with a 0.4 mm nose radius provides an effective balance between strength and detail, enabling reliable contour turning and shoulder work with good surface quality. The insert is double-sided, offering multiple cutting edges per index to reduce tooling costs per part. The presence of a cylindrical hole allows secure clamping in many standard TNMG-compatible holders; compatibility is determined by form, clearance angle, tolerance class, fixing and size. System compatibility and recommended application This insert is part of an ISO turning insert system and is suitable for both external and internal turning operations. Selection of the correct chipbreaker and grade is essential: the AH6225 grade is a universal choice for stainless steels, offering a sharp yet stable edge for medium machining and variable conditions. Typical system setup comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to secure the insert in the cutting assembly. Productivity gains and process security for stainless machining Using the TNMG160404 AH6225 Tungaloy insert supports higher process security through a robust cutting edge and good chip control from the double-sided chipbreaker design. The combination of geometry and grade often yields improved surface finish and consistent edge life, which reduces downtime for rework. For shops aiming to raise throughput while maintaining component quality, this insert offers a pragmatic route to more productive turning cycles. Contact Metav Werkzeuge for advice on holder compatibility, cutting data and availability of the Tungaloy TNMG160404 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796310 Manufacturer SKU: TUN6796310 SKU: 6796310-Tungaloy Model series: ISO turning inserts Designation: TNMG160404 Facts Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Triangle angle: 60° Clearance angle: 0° Double-sided: yes Special features Material: carbide Coating: AH6225 (PVD-coated) Chipbreaker: double-sided Hole: cylindrical hole Shape: triangular Application: turning ISO designation: TNMG160404 Typical use: external and internal turning FAQ What materials is this insert best suited for? The TNMG160404 AH6225 insert from Tungaloy (SKU 6796310-Tungaloy) is a universal grade optimised for stainless steels, designed to maintain a sharp, stable edge in varying cutting conditions. Is the insert indexable and how many cutting edges are available? This is a double-sided TNMG insert; each side provides multiple edges, enabling economical indexing and extended tool life compared with single-sided designs. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the TNMG160404 conforms to ISO TNMG dimensions for broad holder compatibility. What benefits does the AH6225 PVD coating provide? The AH6225 PVD coating improves wear resistance and thermal stability, leading to longer edge life and more consistent part quality during stainless steel machining. Can this insert be used for both external and internal turning? Yes, the geometry and ISO form make the insert suitable for both external and internal turning when matched to the appropriate holder or boring bar. How should the chipbreaker and grade be selected for a given job? Choose the chipbreaker and grade based on workpiece material, machining type and assembly rigidity; the AH6225 grade is a strong starting point for medium machining of stainless materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, a 0.4 mm corner radius for controlled finishing and the economy of a double-sided chipbreaker to keep machining reliable and efficient. Compatibility with ISO holders ensures straightforward integration into established tool systems. Order the TNMG160404 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6225 turning insert by Tungaloy A TNMG160404 AH6225 insert engineered for versatile external and internal turning, optimised for stainless steels and medium-duty operations PVD-coated carbide for high wear resistance Universal grade for stainless steels AH6225 60° triangular insert for versatile turning 0.4 mm corner radius for balanced finishing Double-sided chipbreaker, cylindrical hole clamp High-performance wear behaviour for stainless-steel turning The combination of a PVD-coated carbide substrate and the AH6225 grade produces a cutting edge that balances sharpness with edge stability. This results in longer tool life and consistent cutting forces across varying cutting conditions, reducing unscheduled tool changes and supporting higher uptime. For production environments machining stainless steels, the durable coating improves resistance to built-up edge and abrasion, while the sharp geometry aids chip formation and surface integrity. Predictable geometry and secure clamping for repeatable results Designed as an ISO turning insert with a 60° included angle and triangular form, the insert fits a wide range of conventional holders. The cylindrical hole and matching clamp system provide secure fixation; the 0° relief geometry suits neutral cutting strategies and helps maintain steady chip flow. A 0.4 mm corner radius is a practical compromise for many turning tasks, offering improved tool strength over finer radii while still enabling refined surface finish. The double-sided chipbreaker gives two usable edges, increasing cost-efficiency per insert. Practical system benefits and process reliability Integration into the typical insert system—insert, external holder or boring bar, clamp and replacement screws—keeps tooling straightforward and serviceable. The grade and chipbreaker selection support adaptable machining: choose the chip control and stability level to match material, depth of cut and feed. Backed by Tungaloy manufacturing standards, the insert contributes to process security and reproducible surface quality, helping to lower scrap rates and improve overall throughput. For application-specific advice and optimisation, Metav Werkzeuge can assist with selection and operational parameters. Request machining advice from Metav Werkzeuge for the Tungaloy AH6225 grade and secure optimised insert selection for your turning tasks Technical data Article number: 6947379 Merchant SKU: 6947379-Tungaloy Manufacturer SKU: TUN6947379 Numeric data Insert designation: 160404 Insert form: TNMG (triangular) Insert size: 16 Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Design & features Material: carbide (PVD-coated) Grade: AH6225 Chipbreaker: double-sided Hole: with cylindrical hole Intended application: turning Model series: ISO turning inserts FAQ What materials is this insert suited for? The TNMG160404 AH6225 insert is optimised for machining stainless steels, with the AH6225 grade providing a compromise between sharpness and edge strength for medium cutting conditions. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert supports consistent chip control and allows two indexable edges per side, improving economy and helping to maintain stable cutting during external and internal turning. Can this insert be used in standard ISO holders? Yes, the insert follows ISO turning insert geometry and fits compatible holders; correct matching depends on holder form, tolerance class, fastening and insert thickness. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a balance between edge strength and finish capability: it gives better edge stability than finer radii while still enabling a smooth surface with appropriate feeds. Is the insert reversible or indexable? The triangular shape and double-sided chipbreaker allow multiple indexings; the secure cylindrical hole fixing ensures repeatable seating for each index. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade for reliable edge stability, the ISO TNMG geometry for broad holder compatibility, and a double-sided chipbreaker for cost-effective turning. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG160404 AH6225 ISO turning insert for Turning — Tungaloy TNMG160404 AH6225 is an ISO-standard triangular turning insert designed for efficient external and internal turning in a wide range of stainless steels. ISO triangular insert TNMG format PVD-coated carbide grade AH6225 0.4 mm nose radius for medium finishing Double-sided chipbreaker for extended use Consistent cutting performance under variable conditions The TNMG-format insert delivers repeatable results thanks to the PVD-coated carbide grade AH6225, which balances a sharp cutting edge with resilience under typical shop conditions. The coating improves wear resistance and thermal stability, allowing steady performance when machining stainless steels. The insert’s ISO geometry ensures compatibility with standard turning holders; form, relief angle and thickness determine the fit, making the component straightforward to integrate into existing tool systems. Optimised geometry for surface quality and tool life With a 0.4 mm nose radius and a 60° lead angle, the insert is set up to produce good surface finishes while maintaining edge strength during medium cutting depths. The double-sided chipbreaker supports predictable chip formation, reducing built-up edge and contributing to longer intervals between indexings. Operators benefit from lower process variability and reliable part quality without sacrificing productivity. Practical system integration and handling The insert is supplied double-sided, enabling economical indexing and extended service life. Its triangular form and 4.76 mm thickness fit the ISO TNMG family of holders and boring bars; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. A cylindrical centre hole simplifies clamping with conventional screws and clamping sets, so the insert can be integrated into standard tool systems with minimal adjustment. Where this insert adds value in production Chosen for turning operations where stainless steels are common, the grade is a universal option when conditions vary between finishing and medium machining. The combination of a sharp yet stable edge and a robust PVD layer gives a favourable trade-off between surface quality and tool life, helping to reduce tool-change frequency and supporting continuous production flow. Contact Metav Werkzeuge for an application review or to request batch availability; technical advice is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 — orders and enquiries handled by Metav Werkzeuge. Technical data Article number: 6947372-Tungaloy Manufacturer SKU: TUN6947372 Manufacturer item no.: 6947372 Core specifications Type designation: TNMG160404 Grade/coating: AH6225 (PVD-coated) Material: Carbide Nose radius: 0.4 mm Lead/approach angle: 60° Thickness: 4.76 mm Size: 16 mm Design & special features Triangular insert, double-sided Centre hole: with cylindrical hole Chipbreaker: double-sided Series: ISO turning insert series Application: Turning; external and internal Typical system: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert intended for? The TNMG160404 AH6225 turning insert (Tungaloy, SKU 6947372-Tungaloy) is formulated as a universal grade for machining stainless steels, providing a balance of edge sharpness and stability for medium-duty operations. Can the insert be indexed and reused? Yes, the insert is double-sided and designed for indexing; each side offers another cutting edge to extend usable life before replacement is required. Which holders are compatible with the TNMG160404 geometry? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO TNMG format is broadly supported by standard turning holders and boring bars. Does the coating improve high-speed capability? The PVD coating on the AH6225 grade enhances wear resistance and thermal stability, supporting consistent performance at moderate to higher cutting speeds in stainless steel machining. Is the insert supplied with mounting hardware? The insert is intended for use with standard clamping systems; the usual requirement is a matching holder, shim or clamping set and corresponding screws as part of the tooling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade, a 0.4 mm corner radius and a robust triangular 60° geometry for stable, repeatable turning results; order the TNMG160404 AH6225 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6225 Tungaloy turning insert for turning TNMG160404 AH6225 Tungaloy is an ISO-indexed triangular turning insert designed for external and internal turning of stainless steels, offering reliable edge stability in medium machining and variable conditions. ISO triangular TNMG insert, 60° geometry PVD-coated carbide grade AH6225 for stainless steel 0.4 mm corner radius for consistent edge strength Double-sided chipbreaker, central cylindrical hole Consistent cutting performance for stainless-steel turning The combination of a PVD-coated carbide substrate and the AH6225 grade provides a balance between a sharp cutting edge and lasting wear resistance during medium-duty operations. The coating reduces built-up edge and improves heat resistance, which results in longer edge life and steadier machining when working with austenitic and other stainless steels. By selecting a universal grade tuned for variable conditions, material-specific chatter and surface deviations are minimised, supporting consistent component quality across batch runs while lowering the need for frequent insert changes. Geometry and design that support precision and repeatability The triangular, 60° geometry with a 0.4 mm corner radius gives a predictable cutting profile and repeatable corner strength for turned features. The insert is double-sided with a central cylindrical hole for secure clamping; this enables two usable edges per index and straightforward replacement without complex setup. A plate thickness of 4.76 mm and ISO-standard dimensions ensure compatibility with standard holders, while the 0° clearance angle and standard size designation provide consistent contact conditions and reliable clamping stiffness, which together reduce vibration and improve surface finish. System integration and economical operation Built as part of an ISO insert system, the plate fits with matching external holders, shims and clamping kits to create a complete tooling solution. The double-sided chipbreaker geometry contributes to predictable chip control and can extend productive cutting windows, reducing tool change frequency and downtime. For operations seeking to combine process reliability with cost awareness, the universal AH6225 grade delivers a pragmatic compromise between performance and economy, especially where varied stainless-steel alloys and intermittent cutting conditions occur. For tailored recommendations on tooling setups with the AH6225 grade or assistance sourcing the TNMG160404 AH6225 Tungaloy turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and availability. Technical data Article number: 6947351 Manufacturer SKU: TUN6947351 Model series: ISO turning indexable inserts Material: carbide Coating: PVD Facts Insert designation: TNMG160404 Grade: AH6225 Plate size: 16 Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Double-sided chipbreaker ISO-standard triangular insert Universal grade for stainless steel Suitable for external and internal turning Secure clamping via central cylindrical hole FAQ What materials is the insert suited for? The TNMG160404 AH6225 Tungaloy insert is optimised for machining stainless steel and performs reliably across a broad range of austenitic and similar stainless alloys. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide provides a balance of sharpness and wear resistance that extends edge life under medium-duty and variable cutting conditions, reducing changeover frequency. Can the insert be used on standard ISO holders? Yes, the insert follows ISO dimensions and fits compatible external holders when form, clearance, tolerance class, fastening, size and thickness match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the sharp, stable cutting edge and PVD-coated carbide grade AH6225 for productive stainless-steel turning; the ISO-standard format and double-sided design provide efficient indexing and cost-effective use in medium machining. Order the TNMG160404 AH6225 directly via Metav Werkzeuge or request application advice from our consultants. TNMG160404 AH6225 ISO indexable turning insert — PVD-coated carbide for turning | Tungaloy TNMG160404 AH6225 is an ISO-format indexable turning insert designed for external and internal turning of stainless steels, combining a sharp yet stable cutting edge with a double-sided chipbreaker for reliable medium machining. PVD-coated carbide grade AH6225 Double-sided chipbreaker for cost-effective indexing ISO-standard TNMG160404 for wide holder compatibility Triangular form with cylindrical hole for secure clamping Consistent performance on rostfreiem steels through PVD-coated carbide The PVD-coated carbide grade AH6225 is formulated for turning stainless steels where a balance of edge sharpness and wear resistance is required. The coating reduces flank wear and heat-induced degradation, which means more consistent cutting performance under variable conditions. For medium metal removal rates the result is a predictable tool life and a stable surface finish; machinists benefit from fewer interruptions and more uniform batch results. The combination of a sharp and stable cutting edge with PVD protection supports both efficiency and repeatability on demanding rostfreiem materials. ISO-format design for straightforward integration and secure clamping As an ISO-standard TNMG insert, this item fits established indexable-holder systems provided the holder matches form, clearance angle, tolerance class, mounting and size. The insert is triangular with a cylindrical hole, facilitating secure clamping and straightforward orientation. Its double-sided chipbreaker allows reversing to use the second cutting edge, improving cost-effectiveness per index. Important geometric data — such as the 0.4 mm corner radius and 4.76 mm thickness — determine cutting strength and component geometry, so matching these dimensions to the toolholder and workholding setup ensures optimal stability and surface integrity in turning operations. Practical guidance for machining and tool selection For external and internal turning applications, select the chipbreaker variant and cutting parameters that match workpiece rigidity and feed rates; the insert’s 0.4 mm radius favours a mix of edge strength and fine finish, while the 60° included angle aligns with many triangular holder geometries. Because compatibility depends on form, free angle, tolerance class and mounting details, users benefit from checking holder specifications before assembly. The insert's double-sided nature and ISO conformity support efficient inventory management and predictable changeover intervals, helping to maintain production flow with minimal downtime. Contact Metav Werkzeuge for tailored cutting data, application advice and to order the Tungaloy TNMG160404 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796309 Manufacturer SKU: TUN6796309 SKU: 6796309-Tungaloy Model series: ISO indexable turning inserts Material: Carbide Grade / Coating: AH6225 PVD-coated Facts Insert designation: TNMG160404 Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Free clearance angle: 0° Special features Triangular insert, double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard TNMG160404 for broad holder compatibility Universal grade for stainless steels, sharp and stable cutting edge Designed for external and internal turning, medium machining FAQ What materials is this insert suitable for? The TNMG160404 AH6225 insert is specified as a universal grade for stainless steels, offering a balance of sharpness and wear resistance for medium turning applications. How does the double-sided chipbreaker affect cost efficiency? A double-sided chipbreaker provides two usable cutting edges per index, increasing edge utilisation and lowering cost per index for the TNMG160404 AH6225 insert. Which holders are compatible with this ISO-format insert? Compatibility requires matching the holder to the insert form, clearance angle, tolerance class, mounting and size; the ISO-standard designation TNMG160404 supports a wide range of commercial turning holders. What cutting geometry should be considered for fine surface finish? The 0.4 mm corner radius and PVD-coated carbide grade AH6225 favour a compromise between edge strength and finish quality; lower feed rates with stable clamping yield improved surface integrity. Is this insert reversible and indexable? Yes, the triangular TNMG160404 design with a double-sided chipbreaker is reversible, permitting indexing to the second cutting edge to extend service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Combining the AH6225 PVD-coated carbide with a 0.4 mm corner radius and a 60° triangular geometry delivers a reliable balance of edge sharpness and stability for medium cutting conditions. Order the inserts directly via Metav Werkzeuge or consult their specialists for application-specific cutting data. TNMG 160404 AH6225 indexable insert for turning — Tungaloy The TNMG160404 AH6225 is an ISO-indexed triangular insert designed for external and internal turning, offering a universal grade optimised for machining stainless steels. PVD-coated carbide AH6225 Optimised for stainless steel machining 0.4 mm corner radius for fine detail 60° triangular insert geometry Double-sided chipbreaker, with centre hole Consistent edge performance for varied stainless-steel work The PVD-coated AH6225 grade is designed as a universal solution for machining stainless steel, combining a sharp cutting edge with sufficient edge stability for medium-duty operations. The PVD coating improves wear resistance and helps maintain surface finish over longer tool life, while the carbide substrate ensures predictable cutting behaviour under varying conditions. This balance reduces the need for frequent insert changes, supporting steady productivity and reliable process results. Geometry that supports precision and repeatability A 60° triangular form with a 0.4 mm corner radius provides a precise option for turning tasks that require controlled corner definition and dimensional accuracy. The insert’s 4.76 mm thickness and 0° relief contribute to rigidity at the cutting zone, aiding in vibration damping and consistent chip formation. Compatibility with ISO-format holders depends on matching the insert form, clearance angle, tolerance class, fastening and size, ensuring reproducible clamping and repeatable part quality when the correct holder and clamp set are used. System advantages that save time and materials The double-sided chipbreaker design and the central cylindrical hole enable economical, double-index usage and secure fixation in the pocket, which lowers tooling cost per edge and minimises machine downtime. As part of an ISO-indexed system—insert, external holder or boring bar, shim/clamp set and spare screws—the component allows fast indexing and straightforward inventory management. The combination of PVD-coated carbide and an optimised chipbreaker supports stable chip control and improved surface finish, making the insert suitable for typical shop-floor turning operations. Contact Metav Werkzeuge for tailored cutting parameters and availability of Tungaloy TNMG 160404 AH6225 indexable inserts at info@metav-werkzeuge.com or call +49 2822 7131930 for application-focused advice Technical data Article number: 6827565-Tungaloy Manufacturer SKU: TUN6827565 Manufacturer article number: 6827565 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Inscribed circle: 16 mm Special features Grade/coating: AH6225 (PVD-coated carbide) Insert form: triangular, double-sided Hole: with cylindrical hole Application: external and internal turning Compatibility: ISO format; match holder form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert suited for? The AH6225 grade is intended primarily for stainless steel machining; the TNMG 160404 AH6225 insert is a universal choice for medium cutting conditions on such alloys. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius gives finer corner definition and improved dimensional control while still offering sufficient edge strength for typical turning operations. Is the insert reversible and easy to index? Yes, the insert is double-sided and can be indexed to present a fresh cutting edge, reducing tooling expenses and downtime. What holder compatibility should be checked before use? Ensure holder compatibility by matching the insert form, clearance/freedom angle, tolerance class, fastening method, size and thickness to achieve secure clamping and repeatable results. Does the PVD coating improve tool life? The PVD-coated carbide construction of the AH6225 grade enhances wear resistance and helps retain surface finish under varying conditions, contributing to predictable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, standard ISO compatibility and a robust 0.4 mm corner radius for steady medium-duty turning of rostfreier Stahl; order directly via Metav Werkzeuge or request tailored advice from the technical team. TNMG160404 AH6225 – ISO turning insert (triangle, 60°) by Tungaloy TNMG160404 AH6225 is an ISO-format indexable turning insert for general external and internal turning applications, designed to deliver a stable cutting edge in changing conditions. TNMG triangular insert, 60° cutting geometry PVD-coated carbide grade AH6225 0.4 mm corner radius for balanced finish Double-sided chipbreaker with cylindrical hole Reliable cutting for rostfreier Stahl with PVD-coated carbide The PVD-coated carbide grade AH6225 is formulated as a universal grade for rostfreie Stähle, combining a keen edge with sufficient edge stability for medium cutting parameters. The coating improves wear resistance and heat protection, which extends the interval between indexings and reduces cycle interruptions. With a controlled balance between sharpness and toughness, this grade supports repeatable component tolerances while helping to maintain a consistent tool life in variable shop-floor conditions. Fast integration into ISO tool systems reduces set-up time As an ISO-standard insert in TNMG geometry, compatibility with tool holders is defined by the insert form, relief angle, tolerance class, fastening and plate thickness. The triangular shape with a 60° included angle and a cylindrical hole allows secure clamping and easy indexing on common external holders or boring bars. This standardisation means quicker changeovers and fewer holder variants in stock, supporting higher machine uptime and simpler logistics. Predictable surface quality from precise geometry A 0.4 mm corner radius provides a compromise between edge strength and surface finish: it reduces the risk of edge chipping while producing a machinable surface quality in medium feeds. The insert is double-sided, enabling two usable edges per side and economical use of the carbide body. The plate thickness of 4.76 mm contributes to rigidity under moderate cutting forces, supporting stable cutting for both external and internal turning tasks. Practical application scope and system components Intended primarily for turning operations, the insert performs best in medium-duty conditions where process stability and consistent chip control are required. The integrated chipbreaker geometry improves chip formation for rostfreier Stahl and eases chip evacuation; selection of the exact chipbreaker and grade should follow workpiece material, machining strategy and setup rigidity. Typical system components comprise the indexable insert, a matching external holder or boring bar, a locating shim/clamp set and replacement fixing screws. If uncertainty remains about holder compatibility or cutting data, the Metav Werkzeuge technical team is available for advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge today for application-specific recommendations on the Tungaloy TNMG160404 AH6225 turning insert and to confirm holder compatibility Technical data Article number: 6947409-Tungaloy Manufacturer article number: 6947409 SKU manufacturer: TUN6947409 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Insert designation: TNMG160404 Size: 16 Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 60° Special features / Versions Grade: AH6225 (PVD-coated carbide) Plate shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical use: external and internal turning System build: insert, holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The TNMG160404 AH6225 insert is specified for rostfreie Stähle and covers a broad range of stainless steel turning tasks under medium cutting conditions. How does the AH6225 grade help with chip control? The PVD-coated AH6225 grade, combined with the double-sided chipbreaker, promotes stable chip formation and evacuation when machining rostfreier Stahl with appropriate cutting parameters. Can the insert be indexed on both sides? Yes, the triangular TNMG design with a cylindrical hole is double-sided and provides multiple usable cutting edges for economical indexing. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius offers a balance between edge strength and surface finish, reducing edge chipping risk while delivering acceptable surface quality at medium feeds. Is the insert compatible with standard ISO holders? The TNMG160404 designation follows ISO norms; compatibility is determined by insert form, relief angle, tolerance class, fastening and thickness, and it fits matching ISO TNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6235 Wendeplatten - Tungaloy
High process security and extended tool life come from the combination of the AH6235 PVD-coated carbide grade, the double-sided chipbreaker, and the repeatable ISO triangular geometry with a 0.4 mm corner radius; order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility. TNMG 160404 AH6235 — Indexable turning insert (Turning) — Tungaloy The TNMG160404 AH6235 is an ISO indexable turning insert engineered for external and internal turning, especially suited to stainless steel and interrupted cutting conditions TNMG 160404 geometry, ISO triangle insert AH6235 PVD-coated carbide grade Double-sided chipbreaker for stable chips 0.4 mm corner radius, 60° cutting angle Reliable cutting in stainless and challenging materials The combination of a PVD-coated carbide substrate and the AH6235 grade delivers a balance of toughness and wear resistance that is particularly effective on stainless steel and in operations with interrupted cuts. The tougher matrix reduces the likelihood of edge chipping and spontaneous breakout, which means fewer unplanned insert changes and more stable production cycles. Because the grade is optimised for resilience rather than maximum hardness, the result is improved tool life under variable cutting forces and higher confidence when machining difficult-to-cut alloys. Accurate geometry for predictable part quality The ISO triangular format with a 60° cutting angle and a 0.4 mm corner radius provides a predictable cutting profile and easy integration into standard turning holders. The neutral 0° relief angle suits neutral cutting geometries and helps maintain consistent contact conditions between insert and workpiece. Compatibility with a given holder is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness, so the standard ISO designation simplifies selection and replacement. This geometry supports repeatable dimensional control, reducing downstream finishing and inspection efforts. Chip control and process stability for productive machining The double-sided chipbreaker is designed to generate short, controllable chips under a range of feeds and depths of cut; this improves swarf evacuation and reduces downtime caused by chip entanglement. In combination with the PVD surface finish, the insert lowers cutting forces and helps maintain surface integrity, which can shorten cycle times and reduce rework. For external and internal turning, matching chipbreaker and grade to workpiece, machining method and machine-tool rigidity is recommended to maximise throughput and surface quality. If further machining parameters are required, our team can provide guidance to tune feed, speed and depth for the best balance of performance and economy. For application guidance or to secure the PVD-coated AH6235 grade from Tungaloy, contact Metav Werkzeuge by email or phone — our technical consultants will advise on holder compatibility and stock availability Technical data Article number: 6889583 Manufacturer SKU: TUN6889583 SKU: 6889583-Tungaloy Series: ISO indexable turning inserts Designation: TNMG160404 AH6235 Tungaloy insert Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Hole: cylindrical, with hole Special features Material: carbide Coating: PVD Grade: AH6235 Chipbreaker: double-sided Shape: triangular Application: turning (external and internal) Intended use: stainless steel, interrupted cuts, high breakout risk FAQ What workpieces is this insert best suited for? The TNMG160404 AH6235 insert is formulated for stainless steel and other tough alloys, and it performs well in interrupted cuts and operations with higher breakout risk. How does the AH6235 grade affect tool life? The AH6235 PVD-coated carbide grade emphasises toughness and stable edge behaviour, which reduces chipping and typically extends tool life in demanding turning tasks. Can the insert be used on both external and internal turning operations? Yes, the triangular ISO geometry and the double-sided chipbreaker make the insert suitable for both external and internal turning when the correct holder and cutting parameters are selected. What does the 0.4 mm corner radius change in the final part? A 0.4 mm corner radius improves edge strength and can produce stronger corner profiles, reducing the risk of corner chipping while slightly influencing the surface finish and tool forces. Is the TNMG160404 compatible with standard ISO turning holders? The ISO designation facilitates compatibility, but final fitting depends on holder form, fixing method, tolerance class and insert thickness; confirm these dimensions against the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6235 Wendeplatten - Tungaloy
For reliable, cost‑efficient turning, select the PVD‑coated AH6235 grade for improved resistance to chipping in stainless steel and interrupted cuts; combine this with the 0.4 mm corner radius and 60° triangular geometry for consistent edge security and longer tool life. Order the TNMG 160404 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6235 Tungaloy turning insert — PVD‑coated carbide, 60° triangle The TNMG 160404 AH6235 is an ISO‑conforming triangular turning insert designed for external and internal turning, suited to machining stainless steel and applications with interrupted cuts. PVD-coated AH6235 for stainless steel 60° triangular geometry for secure clamping 0.4 mm corner radius for versatile profiles Double-sided chipbreaker for stable chip control Consistent cutting performance for demanding turning operations The combination of a PVD‑coated surface and the AH6235 grade provides a tougher, more resilient cutting edge tailored to the demands of machining stainless steel and other difficult alloys. The harder coating reduces adhesion and localised wear, while the tough substrate mitigates crack formation under load. With a 0.4 mm corner radius the insert offers controlled profile generation and reduced risk of premature chipping; this translates into fewer insert changes and improved uptime on the shop floor. Operators benefit from a balance between edge strength and finishing capability, enabling stable cycle times in serial production. Versatility and reliability in interrupted cuts and tight tolerances The triangular 60° geometry gives three usable cutting corners per side and a compact contact area that supports secure clamping. The double‑sided chipbreaker promotes consistent chip formation across a range of feeds and depths, easing evacuation in interrupted cuts and reducing rework. Important compatibility factors such as form, 0° clearance angle, tolerance class, fixing method, size and thickness determine fit with holders; these parameters follow ISO conventions to simplify selection. The insert’s cylindrical hole supports positive seating and repeatable positioning, contributing to process reliability and predictable surface quality. Practical system integration and workshop advantages The insert forms part of a standard ISO turning system: insert, matched external holder or boring bar, shim/clamping set and replacement screws. Marked by its measured dimensions and ISO designation, the component integrates readily into existing tool inventory and fixture routines. The combination of PVD coating, robust substrate and the double-sided chipbreaker reduces the frequency of tool changeovers and supports consistent surface finish in series machining. With the clear SKU and article references, planners can order spares and manage tool life economically while maintaining traceability across production batches. For machining tasks that demand stable performance with stainless steel, contact Metav Werkzeuge to discuss the TNMG 160404 AH6235 from Tungaloy or request tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6889579-Tungaloy Manufacturer article number: 6889579 Manufacturer SKU: TUN6889579 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Geometry angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Special features Material: Carbide Coating/grade: AH6235 (PVD-coated) Plate form: Triangular Chipbreaker: Double-sided Hole: With hole, cylindrical hole Application: Turning; suitable for stainless steel and interrupted cuts ISO designation: TNMG160404 Compatibility: Depends on form, clearance angle, tolerance class, fixing, size, thickness FAQ What materials is the insert suitable for? The TNMG 160404 AH6235 is specified for machining stainless steel and is resilient in interrupted cuts; the AH6235 PVD grade improves edge stability for such materials. How does the 0.4 mm corner radius affect application? A 0.4 mm corner radius offers a compromise between edge strength and profile detail, allowing robust cutting in roughing and acceptable surface finish in finishing passes. Is the insert compatible with standard ISO holders? Yes, the triangular ISO designation and cylindrical hole are intended for ISO‑compliant holders; compatibility is confirmed by matching form, clearance angle, tolerance class, fixing and plate thickness. How many cutting edges are available per insert? The triangular 60° geometry provides multiple usable corners; the double‑sided design further extends usable edge life before indexing. What benefits does the AH6235 grade deliver? The AH6235 PVD‑coated grade combines a tougher substrate with a wear‑resistant coat, reducing chipping risk and improving performance on stainless steel and applications with higher breakout potential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade optimised for stainless steel, combined with a 60° triangular geometry and a 0.4 mm corner radius for consistent chip control and extended tool life; order the TNMG160404 AH6235 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 AH6235 — Turning insert, PVD-coated carbide, 60° TNMG160404 AH6235 is an ISO-format turning insert designed for external and internal turning, with a focus on interrupted cuts and applications where increased breakout risk occurs PVD-coated cemented carbide Optimised for stainless steel Triangular insert, 60° cutting geometry Double-sided chipbreaker, with cylindrical hole Proven toughness for demanding stainless steel work The AH6235 grade is a PVD-coated cemented carbide formulated to deliver enhanced toughness where material adhesion and built-up edge risk are elevated. This makes the insert particularly suitable for turning operations on stainless steel and for intermittent cutting passes. The tougher substrate reduces chipping under variable cutting forces, which translates into fewer indexings and longer effective tool life — a direct improvement to process uptime and cost-efficiency. The coating enables stable performance at typical turning speeds while helping to maintain a consistent cutting edge. Predictable geometry for repeatable surface quality An ISO-standard triangular geometry with a 60° included angle and a 0.4 mm corner radius provides predictable cutting behaviour across series production. The listed geometry ensures stable tool engagement during radial passes and helps control the resulting surface finish. The listed 0° clearance supports neutral cutting entry angles, making this insert versatile for both light finishing and heavier, interrupted cuts. The ISO conformity simplifies holder selection and reduces the effort required to validate new tool setups. Secure mounting and straightforward compatibility The insert is supplied with a cylindrical hole, enabling reliable centring and clamping in compatible ISO holders and boring bars. Compatibility to the chosen holder is governed by form, free clearance angle, tolerance class, fastening method, size and thickness; matching these parameters reduces assembly time and avoids insecure seating that can cause vibration or premature wear. The double-sided design doubles the number of usable cutting edges per insert, lowering tooling consumption and simplifying inventory management. Chip control and application-focused performance A double-sided chipbreaker geometry supports consistent chip formation across a range of feeds and depths, easing chip evacuation and reducing the risk of surface damage during interrupted operations. When paired with the AH6235 grade, the chipformer assists in taming the typically sticky behaviour of stainless steel, improving both productivity and repeatable dimensional accuracy. For shops seeking a balance between robustness and surface quality, this insert provides a clear technical advantage in many turning applications. For technical availability and personalised cutting recommendations for Tungaloy TNMG160404 AH6235 inserts, please contact Metav Werkzeuge — info@metav-werkzeuge.com, +49 2822 7131930 — for application-matched advice and current stock information. Technical data Article number: 6889849 Manufacturer SKU: TUN6889849 SKU: 6889849-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: 160404 Insert geometry angle: 60° Corner radius: 0.4 mm Insert size: 16 mm Clearance angle: 0° With hole: with hole Special features Shape: triangular Chipbreaker: double-sided Coating: PVD Grade: AH6235 Material: carbide Hole style: cylindrical hole Application: turning FAQ Is this insert suitable for stainless steel? Yes. The AH6235 grade of the TNMG160404 insert is developed for machining stainless steel and for applications prone to breakout. What are the key geometry details of the insert? The insert features a 60° triangular geometry, a 0.4 mm corner radius and a 0° clearance angle, as specified for TNMG160404 AH6235. Can the insert be indexed to use multiple cutting edges? Yes. The insert is double-sided, allowing indexing to fresh edges to extend service life and reduce tooling costs. How is the insert mounted in a holder? The insert is supplied with a cylindrical hole for positive locating; compatibility depends on holder form, free angle, tolerance class, fastening and size. For which turning tasks is this grade recommended? AH6235 is particularly suitable for interrupted cuts and turning of stainless steel where increased breakout risk and adhesive wear are concerns. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 AH6235 Wendeplatten - Tungaloy
Combine the AH6235 PVD‑coated carbide grade with the 0.4 mm corner radius and ISO geometry for consistent performance in stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for process optimisation. TNMG 160404 AH6235 — Tungaloy indexable turning insert, PVD‑coated carbide, 0.4 mm radius The TNMG160404 AH6235 is an ISO‑standard triangular indexable insert engineered for external and internal turning, optimised for stainless steel and interrupted cutting conditions. PVD‑coated carbide AH6235 for stainless steel ISO triangular insert, 16 mm size 0.4 mm corner radius for precise finishes Double‑sided chipbreaker with cylindrical hole Reliable material performance for demanding stainless operations The combination of the PVD‑coated carbide grade AH6235 and its ISO geometry delivers high process stability when machining challenging alloys. The tougher substrate of this grade reduces the risk of edge chipping during interrupted cuts, while the coating enhances wear resistance at elevated temperatures. As a result, cycle times remain consistent and tool life is extended, contributing to predictable production throughput and lower overall machining costs. Geometry that simplifies set‑up and increases uptime With its triangular shape, 16 mm size and an included angle of 60°, the insert fits a broad range of ISO holders; the cylindrical hole ensures secure clamping and repeatable position tolerance. The 0.4 mm corner radius balances strength and surface integrity, enabling tighter tolerances without sacrificing edge robustness. Compatibility is determined by form, clearance angle, tolerance class, fastening and thickness, so pairing the insert with the correct holder is straightforward and reduces trial adjustments. Productivity advantages in interrupted and stainless cutting The double‑sided chipbreaker is tuned to promote stable chip control in stainless steels and other adhesive materials, lowering the likelihood of built‑up edge and improving surface finish. The tougher AH6235 grade is specifically selected for operations with elevated breakout risk, providing a pragmatic trade‑off between toughness and wear resistance. This makes the insert a reliable choice for mixed production runs where both uninterrupted and interrupted turning occur. Practical handling and economic benefits for the workshop Because the insert is ISO‑standard, inventory management is simplified and tool changeover is fast, supporting lean manufacturing principles. The PVD coating reduces flank wear and preserves the cutting geometry longer, which means fewer indexings and replacements per production batch. Clear technical data and consistent shank compatibility translate into easier process documentation and reproducible results across shifts, improving first‑pass yield and operator confidence. Contact Metav Werkzeuge to review AH6235 suitability for specific components or to request a tailored recommendation; Metav Werkzeuge’s consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with holder selection and machining parameters Technical Data Article number: 6889589-Tungaloy Manufacturer article number: 6889589 Manufacturer SKU: TUN6889589 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Free clearance angle: 0° Special features Grade: AH6235 Material: PVD‑coated carbide Chipbreaker: double‑sided Hole: cylindrical hole Shape: triangular Application: external and internal turning; interrupted cuts; stainless steel machining ISO‑standard indexable insert FAQ What materials is this insert suited for? The TNMG160404 AH6235 indexable insert (Tungaloy, SKU 6889589‑Tungaloy) is designed primarily for stainless steel and similar difficult‑to‑machine alloys, and performs well in interrupted cutting. Can the insert be used for internal turning as well as external turning? Yes; the ISO triangular geometry and the cylindrical hole fastening make the insert suitable for both external and internal turning when matched with the correct ISO holder. How does the AH6235 grade affect tool life? The AH6235 PVD‑coated carbide grade emphasises toughness to resist chipping in interrupted cuts, which typically leads to improved service life and fewer unscheduled indexings for the TNMG160404 insert. What are the key dimensions to check for holder compatibility? Check the plate size (16 mm), thickness (4.76 mm), included angle (60°) and corner radius (0.4 mm) against the holder specifications to ensure proper fit and clamping. Is chip control adequate for long, continuous cuts? The double‑sided chipbreaker is optimised for good chip formation in stainless steels and offers consistent control across a range of feeds; performance in continuous cuts benefits from correct parameter selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com