TNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a double-sided chipbreaker for stable chip control and the proven triangular 60° geometry for reliable turning performance; Order the TNMG110408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 110408 T9215 – Turning indexable insert, CVD-coated carbide, 60° – Tungaloy TNMG110408 T9215 is an ISO-standard triangular indexable insert designed for productive external and internal turning of medium steels CVD-coated carbide grade T9215 Suited for medium steel machining Double-sided chipbreaker design Triangular 60° insert with cylindrical hole High-efficiency turning for medium steels The CVD-coated carbide composition of this grade, identified as T9215, combines elevated wear resistance with good fracture toughness, making it well suited to sustained, productive machining of medium steel. In practice this means fewer insert changes and more stable cutting conditions during continuous or lightly interrupted cuts, so machining cycles run with consistent output. The coating supports temperature resistance at the cutting edge, helping to maintain dimensional accuracy and reduce edge breakdown during longer runs. Secure clamping and standardised compatibility As an ISO-standard indexable insert with a triangular form and a 60° included angle, the geometry is widely compatible with matching holders when the form, relief, tolerance class, fastening and thickness are respected. The insert features a cylindrical hole and a 0° relief angle that facilitate reliable seating and quick indexing on appropriate external holders or boring bars. Correct holder selection and mounting torque ensure stable cutting, minimised vibration and predictable tool life. Controlled chips and improved surface finish The double-sided chipbreaker is engineered to support consistent chip formation and evacuation, which contributes directly to better chip control and reduced risk of recutting. Predictable chip shapes reduce manual handling and help to protect part surfaces, resulting in improved surface quality and lower rework rates. Matching the chipbreaker style and grade to the workpiece and machining conditions is essential to exploit these benefits fully. Durable performance and selection guidance Constructed from a wear-resistant cemented carbide substrate and enhanced with a CVD coating, the insert offers longer tool life and cost-effective operation for medium steel turning tasks. For optimal results pair the insert with a holder matching the TNMG form and consider the cutting data appropriate to the material and machine rigidity. For application-specific recommendations or to confirm compatibility with existing toolholders, Metav Werkzeuge’s technical advisors can provide tailored guidance and verify suitable combinations. Contact Metav Werkzeuge for application advice and availability of the Tungaloy TNMG110408 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966257 Manufacturer SKU: TUN6966257 SKU: 6966257-Tungaloy Brand: Tungaloy Model series: ISO-indexable turning inserts Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle (size): 11 mm Included angle: 60° Relief angle: 0° Designs / Special features Grade: T9215 (CVD-coated carbide) Double-sided chipbreaker Triangular shape Cylindrical hole ISO-standard indexable insert Suitable for turning applications Compatibility determined by holder form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The insert in grade T9215 is optimised for medium steel machining; the CVD-coated carbide substrate balances wear resistance and toughness for productive turning. Is the insert reversible and how many cutting edges are available? As a double-sided triangular insert, the TNMG110408 T9215 offers multiple usable edges per index, enabling economical use before replacement. How does the chipbreaker affect machining? The double-sided chipbreaker promotes consistent chip formation and evacuation, improving chip control and contributing to better surface quality during turning operations. What does the 60° included angle imply for applications? A 60° geometry gives a balanced combination of strength and versatility for turning profiles; it is standard for TNMG-style inserts and suits a wide range of external and internal turning tasks. Which holder features must be checked for compatibility? Compatibility depends on the holder’s seat form, relief angle, tolerance class, fastening method, and accommodation for the insert’s size and thickness; matching these ensures stable clamping and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control and broad ISO compatibility for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for selection and process optimisation. TNMG 110408 T9215 Turning Insert – Tungaloy (ISO 110408, 60°) TNMG110408 T9215 is a triangular ISO turning insert designed for medium-steel machining and continuous to mildly interrupted cuts ISO-compliant triangular insert 60° CVD-coated carbide T9215 for steel Double-sided chipbreaker, indexed use Cylindrical hole for secure clamping Maximised productivity for medium-steel turning The T9215 grade combines a CVD-coated carbide substrate with a balance of wear resistance and fracture toughness to support higher cutting speeds and consistent tool life. In practice, this means fewer insert changes and steadier cycle times during external and internal turning operations. The geometry with a 0.8 mm corner radius and 60° lead angle delivers reliable component profiles while the double-sided chipbreaker ensures predictable chip formation when machining a wide range of steels. Technical users benefit from a higher effective tool life and more stable processes, which supports production planning and cost-efficiency. Secure clamping and straightforward integration into ISO systems Compatibility with holders is determined by form, clearance, tolerance class, attachment, size and thickness; the TNMG110408 conforms to ISO dimensions for predictable fitment. The triangular 11 mm size and 4.76 mm plate thickness, together with a cylindrical hole, permit robust clamping in indexable toolholders and boring bars. For shops standardising on ISO inserts, this reduces tooling variants and inventory complexity. The presence of a central hole enables exact positioning and repeatable mounting, which helps maintain concentricity and dimensional stability across repeated indexing cycles. Geometry and handling that support consistent surface quality The insert’s geometry—triangular shape, 0° clearance angle, and defined corner radius—helps produce uniform surface finishes with low vibration in stable setups. The double-sided design allows two indexing positions per side, doubling the usable cutting edges compared with single-sided inserts. This yields economical edge utilisation and a simple inspection routine for wear detection. For operators less familiar with carbide grades, the CVD coating can be explained as a thin, hard layer applied to the carbide that improves thermal and abrasive resistance during continuous cutting. Application advice and selection guidance When selecting a chipbreaker and grade, pair the T9215 variety with stable machining conditions and tools designed for medium steel. For interrupted cuts or highly unstable setups, consider alternative geometries or increased rigidity in the toolholder. The system build-up for this insert typically comprises an ISO turning insert, a matching external holder or boring bar, a clamp or substrate and replacement screws. Following this approach ensures predictable performance and easier troubleshooting during process development. Contact Metav Werkzeuge today for tailored machining advice or to order original Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772304 Manufacturer SKU: TUN6772304 SKU: 6772304-Tungaloy Manufacturer article number: 6772304 Facts Angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Special features CVD-coated carbide grade T9215 Triangular insert shape Double-sided chipbreaker Cylindrical hole (with hole) ISO-standardised turning insert Suited for medium steel machining For external and internal turning applications FAQ What materials is this insert best suited for? The TNMG110408 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for productive steel turning. Can the insert be indexed to use multiple cutting edges? Yes, the triangular design with a double-sided chipbreaker allows indexing of multiple edges to extend usable life and reduce tooling changes. Which holders are compatible with this ISO insert? Compatibility is determined by the holder’s form, clearance, tolerance class, attachment, size and thickness; standard ISO turning holders and compatible boring bars accept this TNMG110408 insert. Does the coating improve performance for continuous cuts? The CVD coating enhances thermal and abrasive resistance, supporting higher productivity in continuous to lightly interrupted turning operations. Is the insert supplied with screws or clamping hardware? This product is the indexable insert only; the usual system build includes the matching holder, clamp or seat and replacement screws which must be selected separately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
High wear resistance and fracture toughness of the CVD-coated carbide grade T9215, combined with a 0.8 mm corner radius and ISO TNMG geometry, support reliable, high-productivity turning of medium steels; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 110408 T9215 indexable insert for Turning — Tungaloy, CVD-coated carbide, 0.8 mm radius A TNMG 110408 T9215 indexable turning insert developed for medium-steel machining, offering a robust CVD-coated carbide substrate and ISO-standard geometry for stable, repeatable performance. CVD-coated carbide T9215 for medium steel 0.8 mm corner radius for consistent finishes Double-sided triangular insert with cylindrical hole ISO-standard TNMG geometry, 60° included angle Productivity that withstands continuous and light interrupted cuts The CVD-coated grade T9215 is engineered to balance wear resistance and fracture toughness, making it a reliable choice for sustained production runs. The coating increases resistance to abrasion while the substrate maintains edge integrity under load; the result is extended tool life and fewer unscheduled tool changes. For manufacturers aiming to improve throughput, this combination delivers measurable benefits in cycle-time stability and predictable replacement intervals without sacrificing surface quality. Precision geometry for consistent surface quality The insert’s 0.8 mm corner radius and 60° included angle produce a predictable cutting geometry that helps maintain a uniform surface finish on turned components. The triangular, double-sided plate with a cylindrical hole provides stable clamping and simple indexing, while the 4.76 mm plate thickness increases rigidity where it matters. Together, these geometric features reduce chatter risk and support reproducible part tolerances in external and internal turning operations while simplifying setup and inspection. ISO compatibility and handling that save setup time As an ISO-standard TNMG insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness — all factors that determine correct seating and clamping. The insert’s indexable design lets operators present a fresh cutting edge quickly, reducing downtime during production. Clear adherence to ISO dimensions also eases tool management across mixed fleets of equipment and shortens changeover times between jobs. Practical recommendations for machining medium steels For best results in Turning of medium steel, pair the grade T9215 with a chipbreaker matched to the depth of cut and feed to optimise chip control. The insert performs well in continuous and slightly interrupted cuts; where interruptions are more pronounced, reduce cutting parameters and verify clamping rigidity. Appropriate coolant application and correct holder selection will further extend performance and surface integrity. Metav Werkzeuge can advise on holder compatibility and chipbreaker options to match specific process requirements. Order original Tungaloy TNMG 110408 T9215 inserts via Metav Werkzeuge for assured productivity in medium-steel turning and request tailored application support from our consultants Technical Data Article number: 6782316 Manufacturer SKU: TUN6782316 SKU: 6782316-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Included angle: 60° Relief angle: 0° Special features Grade/coating: T9215 (CVD-coated carbide) Double-sided insert with chipbreaker Triangular plate form with cylindrical hole Application: Turning (external and internal) ISO designation: TNMG110408 Compatibility: holder determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The Tungaloy TNMG 110408 T9215 insert is optimised for medium-steel machining; the T9215 grade combines wear resistance and toughness for consistent performance on these materials. Can this insert be used for interrupted cuts? Yes, the CVD-coated grade is suitable for continuous to slightly interrupted cuts; for heavier interruptions, reduce cutting parameters and ensure secure clamping of the component and holder. How does the insert index and how is it clamped? The triangular, double-sided shape with a cylindrical hole allows straightforward indexing and secure clamping in compatible holders; correct seating depends on form, relief angle and tolerance class. What advantages does the T9215 grade deliver? T9215 provides high wear resistance alongside fracture toughness, enabling higher productivity with predictable tool life and reliable edge stability in medium-steel turning operations. Is the TNMG110408 compatible with ISO holders? The TNMG110408 designation follows ISO dimensions, so compatibility is determined by matching the insert form, relief angle (0° in this case), thickness and fastening style to the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated T9215 grade's high wear resistance with a robust triangular form and a 0.8 mm nose radius delivers dependable performance for medium‑steel turning operations. Order the TNMG 110408 T9215 Tungaloy insert directly via Metav Werkzeuge or contact the consultants for application support. TNMG 110408 T9215 — ISO triangular turning insert for medium steel, Tungaloy The TNMG 110408 T9215 is an ISO‑standard, triangular indexable insert designed for external and internal turning applications and optimised for productive machining of medium‑strength steels. CVD-coated carbide for high wear resistance Suitable for medium steel machining Double-sided chipbreaker for versatility ISO TNMG 110408 triangular form, 0° relief Higher throughput through material and coating technology The combination of CVD‑coated surface and a wear‑resistant carbide substrate in grade T9215 provides a balance of abrasion resistance and fracture toughness that supports higher cutting speeds and extended tool life. This makes the insert particularly effective for continuous and lightly interrupted turning where consistent metal removal and stable tool life are priorities. The coating reduces flank wear and helps maintain dimensional accuracy over longer production runs, contributing directly to improved process economy and less frequent index changes. Secure fit and predictable clamping for consistent results Compatibility with the toolholder depends on form, relief angle, tolerance class, fixing method, size and thickness; the ISO conformity of the TNMG110408 shape simplifies selection and replacement within standard clamping systems. The insert features a cylindrical hole and is designed for reliable seating with the appropriate shim and clamp set. Predictable clamping and a standardised form support repeatable positioning and process stability, reducing setup time and the risk of misalignment during high‑volume turning. Improved surface finish and edge stability The 0.8 mm nose radius combined with the insert’s double‑sided chipbreaker and 60° included angle helps achieve a fine surface finish while maintaining edge strength. A modest radius offers a compromise between surface quality and robustness: the radius reduces cutting forces peaks and distributes load across the edge, which in turn lessens the likelihood of premature edge chipping. For applications prioritising surface integrity on medium steel, this geometry supports a reliable balance between finish and productivity. System‑oriented handling for efficient workshop use The insert is intended as one component of a complete turning system—an ISO insert paired with the correct outer holder or boring bar, a matching backing pad and clamping screws. The 4.76 mm thickness and 11 mm size are standard dimensions that ease stocking and interchangeability across compatible holders. As an indexable component, the insert allows efficient edge rotation to restore cutting performance without full tool replacement, reducing tool management complexity and downtime in production environments. For fast delivery and tailored application advice on Tungaloy's T9215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for availability and recommendations. Technical Data Article number: 6772326 Manufacturer SKU: TUN6772326 Type: ISO turning insert TNMG110408 Material: Carbide Coating: T9215 (CVD) Shape: Triangular Hole: with cylindrical hole Facts Nose radius: 0.8 mm Thickness: 4.76 mm Size: 11 mm Relief angle: 0° Insert angle: 60° Special features Double-sided chipbreaker CVD-coated carbide Suitable for medium steel For continuous and lightly interrupted cuts ISO-series compatibility (form, tolerance, fixing) Triangular, indexable insert FAQ Is this insert suitable for machining steel? Yes. The TNMG110408 T9215 insert uses a CVD‑coated carbide grade optimised for medium‑steel machining and combines wear resistance with fracture toughness for productive turning. How is holder compatibility ensured? Compatibility is dictated by form, relief angle, tolerance class, fixing, size and thickness; the ISO TNMG geometry ensures straightforward matching to compatible toolholders and shims. Can the insert be indexed to present a fresh cutting edge? The triangular, double‑sided design permits indexing to restore a cutting edge without full replacement, enabling efficient edge rotation and reduced tool change time. What cutting conditions is the grade intended for? The T9215 grade is primarily for continuous to slightly interrupted cuts in medium steels, where high productivity and reliable tool life are required. What are the key dimensions to note when selecting a holder? Important dimensions include the 0.8 mm nose radius, 4.76 mm thickness and 11 mm size, plus the 0° relief and the insert’s cylindrical hole for the clamping screw. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110408 T9215 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide grade T9215 and a double-sided chipbreaker for productive medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for precise application guidance. TNMG 110408 T9215 Turning Insert – Tungaloy The TNMG110408 T9215 is an ISO-indexed triangular turning insert engineered for productive medium steel machining, offering robust wear resistance and fracture safety for continuous to slightly interrupted cuts CVD-coated carbide T9215 Suitable for medium steel machining Double-sided chipbreaker design 0.8 mm corner radius Triangular ISO TNMG form Higher productivity through engineered coating and grade The CVD-coated carbide of this insert provides elevated wear resistance while maintaining toughness, making it a reliable choice for sustained production. The T9215 grade combines surface protection with inherent fracture safety, which supports higher cutting parameters without compromising tool life. For operations that demand consistency—such as long turning cycles on medium steel—the coating reduces flank and crater wear, resulting in fewer interruptions and a more predictable machining rhythm. This translates directly into improved throughput and lower tool-change frequency. Precise geometry for quick setup and stable cutting Designed as an ISO TNMG triangular insert with a 60° included angle and a 0.8 mm corner radius, the geometry supports versatile turning tasks where dimensional control and surface quality matter. The insert has a 0° clearance angle and a cylindrical hole, which influences clamping and seat compatibility; matching the holder by form, clearance angle, tolerance class, fixation method, size and thickness ensures optimal stability. The double-sided chipbreaker reduces built-up edge and aids consistent chip formation, helping to protect the workpiece finish and enabling repeatable results across batches. Cost-efficient use and operational reliability The double-sided configuration increases usable cutting edges per index, improving cost-efficiency over single-sided designs while the 4.76 mm thickness contributes to rigidity under load. Material and chipbreaker selection should align with workpiece composition and cut type: the CVD-coated T9215 grade is particularly well suited for medium steel where both wear control and resistance to chipping are required. With ISO conformity and clear specifications for size and hole style, the insert integrates into existing tool systems with minimal adaptation, supporting predictable process planning and reduced setup time. For production-focused turning applications choose the Tungaloy TNMG 110408 T9215 insert for a balanced mix of durability and productivity — contact Metav Werkzeuge for ordering or technical consultation by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6966224 Manufacturer SKU: TUN6966224 Dealer SKU: 6966224-Tungaloy Designation: TNMG110408 Facts Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° ISO code: 110408 Special features Material: Hartmetall Coating/grade: T9215 (CVD-coated carbide) Chipbreaker: double-sided Shape: triangular Mounting: with cylindrical hole Clearance angle: 0° Application: turning System: ISO-indexed turning insert compatible with matching holders FAQ What workpiece materials is this insert suited for? The TNMG110408 T9215 insert is designed primarily for medium steel machining; the T9215 CVD-coated carbide grade balances wear resistance and toughness to perform well in continuous to slightly interrupted cuts. How does the double-sided chipbreaker affect performance? A double-sided chipbreaker provides consistent chip control and a reliable cutting geometry on both usable sides, improving surface finish and extending the interval between indexes compared with single-sided alternatives. What holder considerations are important for this insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, fixation method, size and thickness; the triangular TNMG form and cylindrical hole require a corresponding TNMG-compatible holder to ensure secure clamping and repeatable positioning. Is the insert appropriate for interrupted cuts? Yes, the T9215 grade offers fracture resistance that supports slightly interrupted cuts; for heavy interruptions, verify cutting conditions and holder rigidity to maintain consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, versatile ISO insert that combines CVD-coated carbide toughness with a 0.8 mm corner radius for reliable medium-to-heavy steel turning; compatibility with standard ISO holders keeps integration straightforward. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TNMG110408 T9225 ISO turning insert, triangular 60° – Tungaloy A TNMG110408 T9225 insert for ISO-standard external and internal turning, optimised for medium-to-heavy steel machining and interrupted cuts TNMG110408 insert for ISO turning CVD-coated carbide, grade T9225 60° triangular shape, 0.8 mm corner radius Double-sided with cylindrical locating hole Reliable cutting performance for medium‑to‑heavy steel turning The combination of CVD-coated carbide and the T9225 grade delivers an excellent mix of wear resistance and toughness, designed specifically for medium-to-heavy steel machining where cutting conditions can vary. This makes the insert particularly suited to roughing cycles and situations with light interruptions, maintaining consistent tool life and surface quality. The triangular geometry with a 60° cutting angle supports robust engagement, while the double-sided design effectively doubles the number of usable edges per insert, lowering tool costs per component. Easy system integration and clear compatibility guidance Compatibility with toolholders is defined by form, clearance angle, tolerance class, fastening method, size and thickness; this insert conforms to ISO dimensions for straightforward mechanical fit. Key dimensions such as the 11 mm inscribed circle, 4.76 mm thickness and the cylindrical locating hole are standardised to match common external holders or boring bars. The stated 0° clearance angle should be matched with a suitable holder geometry; the system build normally includes a pad or clamp set and replacement screws to ensure secure clamping. These standard interfaces reduce set-up time and simplify tool inventory management. Productivity and chip control for consistent output The integrated double-sided chipbreaker provides predictable chip formation and evacuation, supporting steady metal removal rates and reduced downtime from chip-related issues. The 0.8 mm corner radius offers a compromise between edge strength and surface finish, enabling efficient roughing while still allowing acceptable finishing in many setups. Selecting the correct chipbreaker and grade for the workpiece material and machine stability yields improved process reliability and often a lower cost-per-part through extended edge life and fewer insert changes. Practical application advice and selection tips For external and internal turning of steels—including alloyed and unalloyed varieties—this insert is a robust universal choice when changing engagement or light interruptions demand toughness. Choose a holder that accommodates the 60° triangular shape and the cylindrical hole locating style, and pair the insert with a suitable clamp and screw set. When higher finishes are required, consider a smaller corner radius or a dedicated finishing grade; for heavy roughing, the T9225 grade’s balance of toughness and wear resistance supports stable, productive machining. For reliable, versatile turning with Tungaloy quality, contact Metav Werkzeuge to request this TNMG110408 T9225 insert or for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6787110 Manufacturer SKU: TUN6787110 SKU: 6787110-Tungaloy Manufacturer: Tungaloy Technical specifications Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Style: with cylindrical hole Special features CVD-coated carbide grade T9225 Triangular insert, double-sided ISO-standard turning indexable plate Designed for medium-to-heavy steel machining Robust chip control with double-sided chipbreaker System requires holder/boring bar, pad/clamp set and screws FAQ What materials is this insert best suited to? The TNMG110408 T9225 insert from Tungaloy is optimised for medium-to-heavy steel machining and performs well where interrupted cuts or variable engagement demand additional toughness. How is compatibility with toolholders determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening type, size and thickness; the TNMG110408 matches common ISO holders for triangular 60° inserts and uses a cylindrical locating hole for secure clamping. Can the insert be indexed to use multiple edges? Yes, the double-sided design allows indexing to a second cutting edge, effectively extending service life and reducing cost per usable edge. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm radius increases edge strength for roughing and interrupted cuts while still delivering acceptable surface finish for many general turning operations. Is the coating a CVD layer and what benefit does it provide? The insert uses a CVD-coated carbide construction in grade T9225, providing wear resistance combined with sufficient toughness for productive, reliable steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9225 Wendeplatten - Tungaloy
Combine the CVD-coated carbide T9225 and the ISO TNMG geometry for dependable medium-to-heavy steel turning, ensuring stable chip formation and long tool life; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNMG 110408 T9225 turning insert (TNMG110408) for turning — Tungaloy A TNMG110408 T9225 triangular turning insert engineered for robust external and internal turning of steel components, offering a CVD-coated carbide grade for improved toughness under variable and interrupted cutting conditions. CVD-coated carbide T9225 Triangular TNMG 60° geometry 0.8 mm nose radius for stable cuts Double-sided chipbreaker with hole Reliable cutting performance for medium-to-heavy steel The CVD-coated carbide grade T9225 combines wear resistance with elevated fracture toughness to handle variable engagement and light interruption. This results in more consistent machining when batch parts exhibit dimensional variation or when roughing demands higher resilience. The CVD coating reduces flank wear at elevated temperatures, extending the life of the cutting edge and providing predictable performance over longer series runs. For operations seeking fewer tool changes and steady cycle times, this grade offers a measurable improvement in uptime. Predictable geometry and secure clamping for process stability The triangular TNMG form with a 60° included angle and 0° relief is a common, ISO-compliant geometry that ensures compatibility with standard turning holders. The insert’s cylindrical hole and matching fastening method provide concentric clamping and reduced movement under load, which helps maintain repeatable cutting conditions. The 0.8 mm nose radius increases edge strength for heavier cuts while preserving acceptable surface finish; when finer finishes are required, a smaller radius tool can be selected within the same system. Compatibility with a holder is determined by shape, clearance angle, tolerance class, fastening method, size and thickness — this insert is designed to fit typical ISO mandrels and indexable turning systems. Versatile use in external and internal turning, including interrupted cuts With a double-sided chipbreaker and robust substrate, the insert is suited to both roughing and semi-finishing tasks on steel. The chipbreaker design controls swarf formation across differing depths of cut, making the insert adaptable to changing cutting forces. For interrupted cuts or variable engagement, the combination of T9225 toughness and the TNMG form reduces the risk of chipping, enabling safer, more productive machining. Select the chipbreaker style and cutting parameters to match the material and machining stability for best results. Economical system benefits and simple tool handling Using a double-sided insert with two indexable edges doubles the number of usable cutting edges per insert, lowering per-edge cost and simplifying inventory management. The insert is part of a system that includes holders, shims and clamping screws; planned stocking of these components reduces downtime and streamlines tool changes. Fewer tool swaps and reliable edge life contribute to lower operating cost and higher throughput, making this insert a practical choice for shops focused on productivity and predictable output. For technical guidance on implementing Tungaloy’s T9225 inserts or for availability and delivery via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance. Technical data Article number: 6966225 Manufacturer SKU: TUN6966225 SKU: 6966225-Tungaloy Model designation: TNMG110408 T9225 Data Insert size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Material: carbide Coating: CVD Geometry: triangular TNMG, ISO series Chipbreaker: double-sided Hole style: cylindrical hole Typical application: turning FAQ What materials is this insert best suited for? The Tungaloy TNMG110408 T9225 insert is formulated for medium-to-heavy steel turning; the T9225 grade provides the toughness required for varying engagement and light interruptions. How many edges are available per insert? This triangular TNMG insert features a double-sided chipbreaker, providing two indexable cutting edges per side, which increases usable edges and reduces tooling cost. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO turning insert norms; compatibility depends on matching the insert shape, clearance angle, tolerance class, fastening method, size and thickness to the chosen holder. What benefits does the CVD coating provide? The CVD coating enhances wear resistance at elevated temperatures and improves flank wear performance, resulting in longer edge life and more predictable machining for steel applications. Can this insert handle interrupted cuts? Yes, the T9225 grade is designed for applications with variable engagement and light interruptions, where additional toughness helps prevent chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and a 60° triangular geometry to maintain consistent cutting performance in medium to heavy steel turning. Benefit from an ISO-standard insert that integrates easily with common holders and clamping systems. Order or request tailored advice via Metav Werkzeuge for a smooth procurement and deployment. TNMG110408 T9225 indexable insert for turning — CVD-coated carbide, 60° (Tungaloy) A TNMG110408 T9225 indexable insert designed for robust medium-to-heavy steel turning, offering a universal CVD-coated carbide grade and a triangular 60° geometry for stable cutting. CVD-coated carbide T9225 Universal for medium to heavy steel 60° triangle with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole Consistent cutting under mixed engagement conditions The T9225 grade is a CVD-coated carbide designed as a universal solution when machining medium to heavy steel with variable engagement or slightly interrupted cuts. The coating provides a balanced wear resistance and toughness combination, so the insert sustains cutting forces while reducing flank wear. As a result, the component run-time becomes more predictable, improving overall process stability and reducing unplanned tool changes. Selecting this grade helps to keep cycle times stable when workpiece conditions vary. Straightforward integration with ISO holders As an ISO-standardised insert, the triangular geometry and the 60° cutting angle simplify selection of a compatible external holder or boring bar. Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s measurements match common holder families. The triangle shape and central cylindrical hole enable secure clamping and straightforward indexing, so toolset assembly and replacement are efficient and repeatable within established turning cells. Durable edge life and consistent surface finish The double-sided chipbreaker design and the 0.8 mm corner radius contribute directly to tool life and part quality. A modest corner radius aids edge strength on interrupted cuts and supports a predictable surface finish without excessive cutting forces. The insert’s 4.76 mm thickness adds rigidity at the cutting edge, which reduces chatter risk on longer overhangs and helps maintain dimensional accuracy. These combined characteristics support longer intervals between tool changes and a more consistent finished surface. Practical selection and application advice For best results, pair the insert with a chipbreaker and grade matching the workpiece and stability of the setup: the T9225 grade suits varied steel grades under medium-to-heavy conditions; choose a tighter clamping arrangement and reduced overhang for difficult geometries. When facing softer or non-ferrous materials, opt for a different chipbreaker or grade. Integration into a system typically includes the ISO insert, a corresponding external holder or boring bar, a support shim or clamp set and the correct replacement screws to ensure secure mounting and repeatable performance. For reliable turning results with Tungaloy’s T9225 grade, contact Metav Werkzeuge for tailored technical advice and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6780631 Manufacturer SKU: TUN6780631 Our SKU: 6780631-Tungaloy Name: TNMG110408 T9225 Tungaloy indexable insert Facts Insert angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance (free) angle: 0° Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Triangle-shaped insert, three cutting edges Cylindrical central hole for clamping ISO-standard turning insert Designed for medium to heavy steel machining FAQ What materials is this insert best suited for? The TNMG110408 T9225 insert is optimised for medium to heavy steel machining using the CVD-coated carbide grade T9225. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius on the TNMG110408 balances edge strength and surface finish, improving durability in interrupted cuts while maintaining acceptable component quality. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. Can the insert be indexed to use multiple edges? The triangular design and double-sided chipbreaker allow multiple indexing positions to extend usable cutting edges per insert. What does the chipbreaker design provide during turning? The double-sided chipbreaker controls chip shape and evacuation while contributing to stable cutting forces and consistent surface finish when machining steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise 60° geometry and a versatile 0.8 mm corner radius for reliable medium-to-heavy steel turning; order or request application advice directly via Metav Werkzeuge if assistance is required. TNMG 110408 T9225 Turning Insert (Tungaloy) — CVD-coated carbide, 60° geometry TNMG110408 T9225 is an ISO-compliant triangular indexable insert designed for external and internal turning in steel machining. ISO triangular insert, 60° geometry CVD-coated carbide for steel machining 0.8 mm corner radius for versatility Double-sided chipbreaker with cylindrical hole Consistent productivity with a universal grade The combination of CVD-coated carbide and the T9225 grade delivers a balance of wear resistance and toughness tailored to medium-to-heavy steel machining. The cutting material is formulated to tolerate slight interruptions and varying engagement conditions, which helps to maintain a steady cycle time and reduces scrap. As a result, production runs benefit from stable cutting performance and predictable tool life, supporting efficiency targets on the shop floor. Reliable fit and safe clamping for ISO systems Designed to the ISO indexable insert standard, the geometry and dimensions ensure compatibility with matched external holders and boring bars when form, clearance angle, tolerance class, clamping method, size and thickness are observed. The 60° lead angle and triangular shape give predictable seating in standard toolholders, while the cylindrical centre hole permits secure clamping and simplifies spare-part logistics across ISO tooling systems. This clarity minimises setup time and helps avoid mismatches at installation. Reduced downtime through double-sided use The insert’s double-sided chipbreaker extends usable life by providing access to multiple cutting edges before replacement. With a 0.8 mm corner radius, the geometry supports a range of cutting depths and feed rates without frequent tool changeovers. Fewer interventions at the machine translate into higher uptime and lower handling costs, contributing directly to measurable productivity improvements. Practical selection guidance for assured results Choosing the right chipbreaker and grade for the workpiece and machining conditions is essential. The T9225 grade is a robust universal choice for steel; match the chipbreaker style and the holder rigidity to the intended operation for best outcomes. When in doubt about feed, speed or holder compatibility, consult technical documentation or seek application support so that the insert’s properties are put to best use with minimal trial-and-error. Contact Metav Werkzeuge to discuss suitability for specific steel grades, holder compatibility and batch availability — Metav Werkzeuge provides practical, application-orientated advice for efficient machining. Technical data Article number: 6780636 Manufacturer SKU: TUN6780636 Model series: ISO indexable turning inserts Product name: TNMG110408 T9225 Tungaloy-Wendeplatte Material: carbide Coating / grade: T9225 (CVD-coated) Application: Turning Manufacturer: Tungaloy Core specifications Insert designation: TNMG110408 Geometry: triangular, 60° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 mm Clearance angle: 0° Hole style: cylindrical hole Materials & special features Double-sided chipbreaker Suitable for medium-to-heavy steel machining ISO-standard form and dimensions Robust universal grade for interrupted cuts Compatible with matched external holders and boring bars Multiple cutting edges per insert for reduced changeover FAQ How does this insert perform on steel? The T9225 grade offers a robust, CVD-coated carbide formulation that is targeted at medium-to-heavy steel machining, giving a balance of wear resistance and toughness for stable performance. Will the insert fit existing ISO holders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the insert follows ISO dimensions so it fits standard ISO holders matching the TNMG form. How many cutting edges are available on the insert? With a triangular, double-sided design the insert provides multiple usable cutting edges, allowing extended use before disposal or regrinding. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius gives good versatility, enabling moderate depth cuts and reliable edge strength for mixed finishing and semi-finishing operations. Is the cylindrical hole important? Yes — the cylindrical centre hole helps ensure consistent seating and secure clamping in the toolholder, contributing to repeatable results and safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110408 T9225 Wendeplatten - Tungaloy
The combination of a robust CVD‑coated carbide grade and ISO‑standard geometry ensures reliable performance in medium to heavy turning operations; the T9225 grade delivers toughness where interrupted cuts or variable engagement occur. Order the TNMG110408 insert directly via Metav Werkzeuge or consult Metav’s specialists for grade and chipbreaker selection. TNMG 110408 T9225 Turning insert (ISO triangular) — Tungaloy A TNMG110408 T9225 ISO triangular turning insert designed for medium to heavy steel machining, providing a balance of toughness and wear resistance for variable cutting conditions. TNMG 110408 triangular ISO geometry CVD-coated carbide grade T9225 0.8 mm corner radius for durability Through-hole, cylindrical for secure clamping Consistent cutting under varying engagement for greater process reliability The T9225 CVD‑coated carbide grade is engineered as a robust universal option for the turning of steel, offering enhanced toughness where cuts are interrupted or conditions change. Thanks to the coating and substrate combination, wear progression is controlled and flank wear is delayed, which supports longer tool life and reduces unscheduled index changes. Selecting a grade matched to stability and cutting mode reduces cycle time variance and supports predictable production output. Secure clamping and geometry that supports reproducible results The triangular plate form with a 60° included angle and a cylindrical through‑hole provides reliable seating and repeatable positioning in ISO‑compatible toolholders. The plate’s 4.76 mm thickness and 11 mm size combine with the 0.8 mm corner radius to offer an enlarged cutting edge volume for strength at the corner; this improves resistance to chipping on interrupted cuts and increases tool availability between index changes. Use of the correct holder tolerance and fastening hardware ensures the designed cutting forces are carried safely. Practical advantages: chip control, maintenance simplicity and productivity gains The insert features a double‑sided chipbreaker, enabling two usable edges per face and economical indexable use. For workshops aiming to increase machining uptime, the combination of a stable chipformer and a resilient grade like T9225 reduces scrap risk and supports higher metal removal rates when machine and fixture rigidity are adequate. Where fine surface finish is required, matching the chipbreaker and cutting data to the workpiece material will deliver improved surface quality without sacrificing tool life. The TNMG110408 format simplifies stocking and replacement, reducing administrative overhead in the toolroom. Contact Metav Werkzeuge for application advice on Tungaloy CVD inserts and to check current availability – eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: 6966258 Manufacturer SKU: TUN6966258 SKU: 6966258-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Included angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Special features Coating: CVD Grade: T9225 Material: carbide Application: turning Chipbreaker: double-sided Hole: cylindrical (with hole) Relief angle: 0° FAQ What materials is this insert designed for? The TNMG110408 T9225 insert is intended primarily for steel machining, with the T9225 grade offering toughness suited to medium and heavy turning applications. How should the chipbreaker selection be matched to the workpiece? For consistent chip control and surface quality, match the double‑sided chipbreaker to workpiece ductility and the intended cutting parameters; the chipformer on this insert supports interrupted cuts and variable engagement. How many cutting edges are available per insert? This triangular, double‑sided insert provides multiple usable edges; rotating and indexing the insert extends in‑service life and reduces tool consumption. Is the insert compatible with ISO toolholders? Yes. The plate follows ISO geometry; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness. What benefits does the CVD coating provide? The CVD coating enhances wear resistance and maintains edge integrity under higher thermal loads, increasing life in continuous and moderately interrupted turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 AH6225 Wendeplatten - Tungaloy
Optimise turning performance with a PVD‑coated carbide grade that balances a sharp, stable cutting edge and secure chip control; ideal for medium finishing of stainless steels in both external and internal operations. Order the TNMG110412 AH6225 directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG 110412 AH6225 ISO turning insert — PVD‑coated carbide by Tungaloy The TNMG 110412 AH6225 is an ISO‑indexable triangular turning insert designed for medium machining of stainless steels in external and internal turning applications PVD-coated carbide grade AH6225 for stainless steels Sharp and stable cutting edge for medium machining Double-sided chipbreaker for controlled chip flow ISO TNMG triangular insert with 1.2 mm corner radius Reliable, consistent performance for stainless steel turning The PVD‑coated carbide grade AH6225 delivers a dependable balance between edge sharpness and wear resistance, optimised for stainless steel machining under varying cutting conditions. The coating promotes thermal stability and reduces built‑up edge, resulting in fewer interruptions and more consistent surface finish. By choosing a grade engineered for medium‑duty turning, production cycles benefit from predictable tool life and steady component quality, supporting a smoother machining flow and fewer unscheduled tool changes. Seamless integration into ISO tool systems Designed as an ISO‑standard indexable plate, this triangular insert features a 60° cutting geometry and a 1.2 mm corner radius that match common TNMG holders and toolposts. The insert’s cylindrical hole with secure mounting ensures positional repeatability and straightforward replacement within existing tool systems. Compatibility depends on form, clearance angle, tolerance class, fastening and plate thickness; the standardised format simplifies inventory management and reduces adapter requirements for established turning centres. Efficiency gains through chip control and edge stability The double‑sided chipbreaker and a balanced edge geometry contribute to stable chip formation and evacuation, lowering the risk of tear‑outs and workpiece damage in interrupted cuts. Together with the PVD finish, the geometry helps maintain a sharp cutting line over longer runs, translating into higher productivity and reduced rework. For shops seeking a practical compromise between finish quality and economical cutting, this insert offers measurable improvements in throughput and repeatability. Order genuine Tungaloy TNMG 110412 AH6225 inserts via Metav Werkzeuge for dependable stainless steel turning; contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice Technical data Article number: 6966275 Manufacturer SKU: TUN6966275 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Product name: TNMG110412 AH6225 Tungaloy turning insert Facts Corner radius: 1.2 mm Insert angle: 60° Thickness: 4.76 mm Inscribed circle / size: 11 mm Free clearance angle: 0° Special features Grade/coating: AH6225, PVD‑coated carbide Plate form: Triangular (TNMG) Hole: with cylindrical hole Chipbreaker: Double‑sided Typical use: External and internal turning FAQ What materials is this insert suitable for? The TNMG110412 AH6225 insert is optimised for stainless steels and performs reliably across a broad range of such alloys thanks to its PVD‑coated carbide grade. How does the chipbreaker affect performance? The double‑sided chipbreaker supports consistent chip control and evacuation, improving surface finish and reducing the likelihood of chip‑related interruptions during turning. Which holders are compatible with this insert format? Compatibility is defined by ISO TNMG standards; holders matching the TNMG form, clearance angle, tolerance class, fastening and plate thickness are suitable for secure mounting and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an AH6225 PVD‑coated carbide grade, a 60° TNMG geometry and a double‑sided chipbreaker to achieve stable, repeatable turning of stainless steels; order the insert directly via Metav Werkzeuge or ask the consultants for matching holder recommendations. TNMG 110412 AH6225 turning insert (ISO 110412) for turning by Tungaloy TNMG110412 AH6225 is an ISO‑standard triangular turning insert engineered for external and internal turning, optimised for rostfreie Stähle and medium‑duty, variable machining conditions TNMG 60° triangle geometry AH6225 PVD‑coated carbide grade Double‑sided chipbreaker Suited to rostfreie Stähle Stable cutting edge for mixed and intermittent cuts The combination of a PVD‑coated surface and a well‑balanced carbide substrate ensures a sharp yet robust cutting edge suited to variable cutting conditions. The AH6225 grade is formulated for good edge stability during medium cutting depths and for managing the work hardening tendencies of rostfreie Stähle. This results in fewer edge failures and more consistent component quality under mixed feed and speed regimes. Predictable chip control and surface finish A double‑sided chipbreaker on a triangular insert with a 60° included angle provides reliable chip formation for many turning operations. The geometry promotes controlled chip curl, reducing entanglement and enabling more consistent surface integrity on turned parts. For manufacturing environments where process repeatability is crucial, this insert supports predictable chip flow and helps maintain cycle‑time stability. System compatibility and simple indexation The insert conforms to ISO sizing and a standard hole style with a cylindrical bore, simplifying selection of a matching external holder or boring bar. Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the indexable insert design allows rapid turning to a fresh cutting edge without regrinding, improving uptime and toolroom efficiency. Economical performance over production runs With a 1.2 mm corner radius and a plate thickness of 4.76 mm, the insert offers a balance between strength and access to tight profiles. The PVD surface helps resist built‑up edge and abrasion on rostfreie Stähle, extending usable life and reducing tool change frequency. For batch production or mixed‑series workshops, this translates into lower tooling costs per part and a more predictable maintenance schedule. For dependable stainless steel turning with Tungaloy’s AH6225 grade and ISO TNMG 110412 geometry, contact Metav Werkzeuge for part matching and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6947400 SKU: 6947400-Tungaloy Manufacturer SKU: TUN6947400 Article name: TNMG110412 AH6225 Tungaloy turning insert Facts Geometry: 60° Corner radius: 1.2 mm Thickness: 4.76 mm Size: 11 mm Relief angle: 0° Hole: cylindrical hole Edges: double‑sided Material: carbide Grade: AH6225 Special features ISO turning insert series PVD‑coated grade for rostfreie Stähle Designed for external and internal turning Compatibility depends on form, relief angle and clamping Suitable for medium cutting and varying conditions FAQ What materials is this insert suitable for? The TNMG110412 AH6225 turning insert is primarily designed for rostfreie Stähle, offering stable cutting performance on stainless materials in medium‑duty turning. Is the insert reversible or single‑side? This indexable insert is double‑sided; the design provides two usable cutting edges per side and supports efficient indexation. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamping and thickness; matching holders for TNMG 110412 are selected by these parameters. Does the grade AH6225 have a coating? Yes, the AH6225 grade is PVD‑coated, combining a coated surface with a carbide substrate to improve edge life and abrasion resistance. What corner radius and thickness are specified? The insert features a 1.2 mm corner radius and a plate thickness of 4.76 mm, offering a compromise between edge strength and profile access. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a balanced PVD-coated AH8015 grade, precise 60° triangular geometry and a robust 1.2 mm corner radius for reliable, high-temperature alloy turning; order original inserts via Metav Werkzeuge or consult our specialists for optimal tool selection. TNMG110412 AH8015 — TNMG turning insert for turning, Tungaloy | 60° triangle, 1.2 mm corner radius The TNMG110412 AH8015 is an ISO triangular indexable insert designed for external and internal turning, offering a balanced trade-off between wear resistance and edge stability for heat-resistant alloys. PVD-coated carbide grade AH8015 ISO TNMG 110412 triangular insert 60° cutting geometry, 1.2 mm radius Suitable for turning heat-resistant alloys Higher productivity thanks to an optimised grade The combination of a PVD-coated surface and the AH8015 grade delivers a reliable balance between wear resistance and edge stability, which translates into longer edge life and fewer tool changes. For shops machining heat-resistant materials, this means more uninterrupted runtime and a measurable increase in productivity. The coating reduces adhesion of built-up edge and improves resistance to abrasive wear, supporting consistent process parameters across production runs. Consistent part quality from precise insert geometry The 60° triangular geometry with a 1.2 mm corner radius provides stable engagement and predictable chip formation during turning operations. The 0° relief angle and a plate thickness of 4.76 mm ensure rigidity at the cutting edge, reducing vibration and improving surface finish. In practical terms, this geometry helps maintain dimensional accuracy and surface quality, particularly when combined with a correctly matched ISO external holder and clamping set. Versatility for demanding materials and operations Designed as a first choice for machining heat-resistant alloys, this insert also performs well across a broad range of engineering materials when the correct chipbreaker and grade selection is applied. The double-sided chipbreaker increases cost efficiency by providing two usable cutting edges per side, while the cylindrical hole enables secure, repeatable clamping. Use of the appropriate chipbreaker and stable setup optimises chip control and reduces the risk of edge chipping on difficult-to-cut alloys. Economical handling and reduced tooling costs Being double-sided, the insert offers multiple indexed edges, lowering the cost per cutting edge and simplifying inventory management. The ISO system architecture—insert, compatible external holder, shim and clamp—permits rapid replacement and minimal machine downtime. For production environments aiming for lean tooling logistics, this combination supports lower total cost of ownership without compromising cutting performance. Practical setup and selection guidance When fitting the insert, ensure the holder geometry matches the ISO designation and that the clamp torque is set according to the holder manufacturer’s specification to avoid movement or edge damage. For unstable setups or interrupted cuts, choose a chipbreaker and cutting parameters that prioritise edge strength. If further data is required for process optimisation, Metav Werkzeuge provides specification sheets and application advice to match the insert to the workpiece and machine dynamics. Material and coating explained for clear decision-making The substrate is a hard carbide designed to give a robust cutting edge; the PVD coating adds a thin, hard barrier that reduces friction and slows wear mechanisms at high temperatures. In practice, this means the insert is well suited to elevated cutting speeds on heat-resistant alloys while maintaining edge integrity. For operations where thermal and mechanical loads vary, the balanced properties of this grade support reproducible results and dependable tool life. For reliable, productive turning with Tungaloy AH8015 inserts, contact Metav Werkzeuge for immediate ordering and expert selection advice Technical data Article number: 6966276 Manufacturer SKU: TUN6966276 SKU: 6966276-Tungaloy Brand: Tungaloy Core technical data ISO designation: 110412 Insert type: TNMG Corner radius: 1.2 mm Included angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 Material: Carbide Coating: PVD Grade: AH8015 Special features Double-sided chipbreaker With cylindrical hole Triangular insert form Compatible with ISO external holders Typical application: external and internal turning System build: ISO insert, holder, shim/clamp and replacement screws FAQ What materials is this insert best suited for? The TNMG110412 AH8015 insert is optimised for heat-resistant alloys; its PVD-coated carbide substrate balances wear resistance and edge stability for such materials. How many usable edges does the insert provide? With a double-sided triangular design the TNMG110412 AH8015 offers multiple indexed edges, increasing cost efficiency per cutting edge. Which insert geometry ensures stable results on thin-walled parts? The 60° geometry with a 1.2 mm corner radius provides stable engagement, but for thin-walled workpieces selecting a smaller radius or adjusting cutting parameters may further reduce deformation. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO designation 110412 and is compatible with ISO external holders that match form, free angle, tolerance class, size and thickness. What benefits does the PVD coating provide? The PVD coating reduces adhesion, lowers friction and improves resistance to abrasive and thermal wear, supporting longer edge life when machining demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, a 60° ISO triangle form and a double-sided chipbreaker to keep turning cycles productive and stable; order directly via Metav Werkzeuge or consult our technical team for application-specific guidance. TNMG 110412 AH8015 Tungaloy – ISO turning insert for external and internal turning A TNMG110412 AH8015 turning insert for ISO-indexed external and internal turning, designed for general machining of heat-resistant alloys. PVD-coated carbide grade AH8015 60° triangular ISO form, 11 mm inscribed circle Double-sided chipbreaker and cylindrical hole Balanced wear resistance and cutting-edge stability High productivity through material and coating The combination of a PVD-coated carbide substrate and the AH8015 grade provides a reliable balance between wear resistance and edge stability, making this insert suited to demanding turning tasks on heat-resistant alloys and other difficult-to-machine materials. The coating reduces flank and crater wear under elevated temperatures, extending tool life and reducing downtime. The result is a measurable improvement in process economy through fewer tool changes and more stable batch production. Consistent chip control and secure clamping Equipped with a double-sided chipbreaker and a cylindrical centre hole, the insert delivers predictable chip formation for both light and moderate cutting depths. The triangle geometry with a 60° cutting angle and a 1.2 mm corner radius supports robust engagement in roughing and finishing passes. Compatibility with ISO-indexed toolholders is determined by insert form, relief angle, tolerance class, fixing method, size and thickness, so the component integrates smoothly into standard turning systems for reproducible results. Clear dimensions for process planning Key dimensions such as the 11 mm inscribed circle, 4.76 mm thickness and 1.2 mm corner radius allow straightforward incorporation into machining simulations and fixture set-ups. The 0° relief angle and the ISO-standard shape simplify orientation and seating in most external holders and boring bars. These measurable values help technicians select cutting parameters with confidence, reducing trial-and-error and shortening set-up times at the machine. Versatile application and selection guidance The grade selection of AH8015 makes this insert a first choice for the general machining of heat-resistant alloys, offering a compromise between longevity and edge robustness. For external turning, internal profiling or interrupted cuts, selecting the appropriate chipbreaker and matching the insert to a suitable holder will deliver the intended surface finish and dimensional stability. Where assistance is required in choosing the correct holder or cutting data, Metav Werkzeuge provides technical consultation to align tool choice with component tolerances and machine capability. Contact Metav Werkzeuge for tailored application advice and to request an offer for genuine Tungaloy inserts (SKU: 6947401-Tungaloy) Technical data Article number: 6947401-Tungaloy Manufacturer SKU: TUN6947401 Manufacturer article number: 6947401 Model series: ISO turning indexable inserts Key dimensions ISO designation: TNMG110412 Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Cutting angle: 60° Materials & special features Material: carbide (PVD-coated) Grade: AH8015 Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal); suited to heat-resistant alloys FAQ Which materials is this insert best suited for? The TNMG110412 AH8015 Tungaloy turning insert (SKU: 6947401-Tungaloy) is designed primarily for the general machining of heat-resistant alloys, offering a balance of wear resistance and edge stability for demanding applications. How is compatibility with holders determined? Compatibility is defined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the TNMG110412 shape, 0° relief and 11 mm inscribed circle match standard ISO-indexed turning holders. Can the insert be used for both roughing and finishing? Yes, the double-sided chipbreaker and 1.2 mm corner radius enable use across roughing and finishing passes, provided cutting parameters are adjusted to suit the machining task and workpiece material. What are the benefits of the PVD coating on this grade? The PVD coating on this carbide grade reduces adhesive and abrasive wear at elevated temperatures, improving tool life and maintaining cutting-edge integrity during continuous turning operations. What are the key dimensions to consider when programming a job? Important dimensions are the 11 mm inscribed circle, 4.76 mm thickness, 1.2 mm corner radius and 60° triangle geometry; these values are critical for holder selection and achieving the required tool offsets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T6215 Wendeplatten - Tungaloy
Take advantage of the long wear life and reliable chip control offered by the CVD-coated carbide grade; the triangular ISO geometry with a 1.2 mm corner radius and cylindrical hole ensures stable clamping and repeatable results. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and cutting data. TNMG 110412 T6215 ISO turning insert — CVD-coated carbide, triangular, with cylindrical hole (Tungaloy) A TNMG 110412 T6215 indexable turning insert designed for external and internal turning of rostfreier Stahl under stable to lightly interrupted conditions CVD-coated carbide for wear resistance Optimised for rostfreier Stahl machining Double-sided chipbreaker for consistent chips ISO triangular 60° geometry with cylindrical hole Durable, productive cutting performance for rostfreier Stahl The CVD-coated carbide construction delivers high resistance to abrasive wear, extending tool life and reducing insert changes. Designed specifically for machining rostfreier Stahl, the grade T6215 balances toughness and hardness to withstand the material’s tendency to work-harden. With a robust chip control concept and stable cutting edge, the insert supports longer uninterrupted production runs and predictable tool-change intervals, improving overall shop-floor efficiency. Precise geometry and secure clamping for repeatability The insert’s ISO triangular geometry with a 60° included angle and a cylindrical hole enables secure fixing in standard holders and repeatable seating. The combination of 4.76 mm thickness, 11 mm size and a 1.2 mm corner radius provides a controlled contact area for stable cuts and improved surface integrity. Compatibility with holders depends on form, clearance, tolerance class, fixing method, size and thickness; this established ISO format simplifies selection and replacement in existing tool systems. Consistent chip formation and surface finish Equipped with a double-sided chipbreaker, the insert promotes predictable chip shape and evacuation, which is particularly important when turning rostfreier Stahl to avoid built-up edge and poor surface quality. The 0° clearance angle contributes to a neutral cutting geometry suitable for many turning setups, while the CVD coating supports friction reduction at the rake face. Together these features help achieve better surface finish and dimensional consistency with fewer reworks. Selection advice and process integration When choosing an insert grade and chipbreaker, match the T6215 grade and the chip control to the workpiece condition and the machine’s rigidity. The ISO format allows pairing with a suitable external holder or boring bar plus the required shim and clamping kit. For slightly interrupted cuts or heavier engagement, ensure the toolholding provides sufficient support; for fine finishing cuts, the 1.2 mm corner radius can improve edge strength while maintaining acceptable roundness and profile accuracy. Contact Metav Werkzeuge for tailored cutting parameters, holder recommendations and availability of the TNMG 110412 T6215 insert; the team will advise on optimal setups and delivery options. Technical data Article number: 6944873 SKU: 6944873-Tungaloy Manufacturer SKU: TUN6944873 Model series: ISO-Drehwendeschneidplatten Core specifications Size: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Insert angle: 60° Clearance angle: 0° Hole: cylindrical Chipbreaker: double-sided Special features Geometry: triangular (TNMG) Grade/sort: T6215 Material: carbide Coating: CVD-coated Application: turning; suitable for rostfreier Stahl under stable to lightly interrupted conditions Compatibility note: ISO insert — compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What applications suit this insert best? This insert is intended for external and internal turning, especially for machining rostfreier Stahl under stable to lightly interrupted cutting conditions using ISO-compatible holders. How does the T6215 grade behave with rostfreier Stahl? The T6215 CVD-coated carbide grade offers wear resistance and toughness that helps control work-hardening and maintain a reliable cutting edge when machining rostfreier Stahl. What are the key geometric values to check for holder compatibility? Check the triangular ISO geometry, 60° included angle, 1.2 mm corner radius, 11 mm size and 4.76 mm thickness to ensure correct seating and clamping in the chosen toolholder. Is the insert indexed and double-sided? Yes, the insert features a double-sided chipbreaker, providing multiple cutting edges and predictable chip formation for extended workplace productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant T6215 grade, stable cutting geometry and ISO compatibility for consistent turning of rostfreier Stahl; order directly via Metav Werkzeuge or consult the team for application support. TNMG 110412 T6215 Turning insert (TNMG110412) for Turning by Tungaloy TNMG110412 T6215 is an ISO-standard triangular indexable insert designed for turning applications, optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions CVD-coated carbide T6215 grade Optimised for rostfreier Stahl machining Double-sided chipbreaker for extended use ISO triangular form, 60° with 1.2 mm radius Reliable cutting performance for rostfreier Stahl The CVD-coated carbide grade T6215 delivers high wear resistance and consistent edge stability, especially suited to turning rostfreier Stahl in steady or slightly interrupted cuts. The coated cemented carbide substrate combines surface hardness with a tough core to resist flank wear while maintaining cutting-edge integrity. This results in reliable machining windows and predictable tool life, supporting production processes that prioritise uptime and repeatability. The ISO-standard geometry ensures comparable results across common holders and reduces process variance. Simple integration and predictable mounting Compatibility is determined by the insert's form, relief angle, tolerance class, fastening method, size and thickness. The ISO indexable insert features a triangular form with a 60° included angle and a central cylindrical hole, offering secure clamping in standard TNMG holders. The 0° clearance angle and the plate thickness of 4.76 mm provide mechanical stability while the 1.2 mm corner radius improves edge strength on interrupted cuts. These characteristics make setup straightforward and minimise rework when replacing inserts, supporting efficient tool-change procedures and steady cycle times. Economical operation through robust design A double-sided chipbreaker doubles the number of usable edges compared with single-sided inserts, effectively reducing tooling cost per cutting edge. The robust design and the T6215 coating combination aim to deliver consistent surface finish and extended service intervals, improving overall process economy. The insert's dimensions and grade selection favour applications where stable chip control and abrasion resistance are priorities, helping to lower total machining costs through fewer tool changes and predictable maintenance cycles. For application advice or to check stock of the Tungaloy TNMG110412 T6215 turning insert, contact Metav Werkzeuge for tailored recommendations and availability: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966274 SKU: 6966274-Tungaloy Manufacturer SKU: TUN6966274 Article name: TNMG110412 T6215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Size: 11 mm Design & features Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Grade/coating: T6215 (CVD-coated carbide) Material: carbide Application: Turning FAQ What materials is this insert suitable for? The TNMG110412 T6215 insert is tailored for machining rostfreier Stahl; the T6215 grade and CVD-coated carbide substrate provide wear resistance and edge stability for such alloys. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening style, size and thickness; the TNMG110412’s triangular form, cylindrical hole and ISO geometry suit standard TNMG holders. Can the insert be used on interrupted cuts? The combination of 1.2 mm corner radius and robust plate thickness supports stable to lightly interrupted cutting; heavier interruptions require assessment of mounting rigidity. How many cutting edges are available per insert? This triangular, double-sided insert offers multiple usable edges; the chipbreaker design allows two usable faces per side, effectively increasing edge count and economy. What benefit does the T6215 grade provide? T6215 is a wear-resistant, CVD-coated carbide grade engineered for reliable performance on rostfreier Stahl, delivering consistent tool life and good surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a 1.2 mm corner radius to achieve reliable, high-productivity turning of medium steels; order directly via Metav Werkzeuge or request application advice from the consultants. TNMG110412 T9215 indexable insert for turning by Tungaloy — triangular 60° geometry, CVD-coated carbide A TNMG110412 T9215 indexable insert designed for ISO-format turning operations, suitable for external and internal machining where steady chip formation and productivity are priorities. ISO triangular insert, 60° geometry CVD-coated carbide grade T9215 1.2 mm corner radius for stable cutting Double-sided with cylindrical centre hole High productivity for medium-steel turning The combination of a CVD-coated carbide substrate and the T9215 grade delivers an optimised balance between wear resistance and fracture toughness, making this insert particularly well suited for medium steel machining. The coating improves heat resistance and reduces built-up edge, which supports longer tool life and consistent component quality. For production environments that demand steady cycle times, this solution helps maintain throughput while reducing unplanned tool changes. Reliable geometry and clamping for steady results The triangular, 60° geometry and a corner radius of 1.2 mm provide secure engagement and predictable cutting forces, which in turn support dimensional stability in external and internal turning. The insert is double-sided and features a cylindrical central hole for positive clamping; compatibility with a toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness. The relief angle specified as 0° is typical for this ISO format and should be matched to the holder design to achieve optimal cutting conditions. Practical system considerations and material suitability This ISO-format insert is part of a system comprising the insert itself, a matching external holder or boring bar, and the appropriate shim/clamping set and replacement screws. The T9215 grade is a first choice for continuous to lightly interrupted cuts in medium steel, combining wear performance with robust edge security to support high productivity. The CVD coating and carbide substrate are engineered to perform under stable cutting regimes, offering improved surface finish and consistent chip control. For high-productivity turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for availability and tailored application advice. Technical data Manufacturer item no.: 6772327 SKU: 6772327-Tungaloy Manufacturer SKU: TUN6772327 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9215, CVD-coated carbide Application: turning Numbers / Core technical data Size: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 60° Hole: cylindrical central hole Designs / Special features Triangular insert, double-sided Central cylindrical hole for positive clamping ISO-standard indexable insert format Suitable for continuous to light interrupted cuts Optimised for medium steel machining System requires compatible external holder, shim/clamping set and screws FAQ What materials is this insert intended for? This insert, TNMG110412 T9215 by Tungaloy, is specified primarily for medium steel machining and offers a balance of wear resistance and toughness suited to that material group. How does the T9215 grade affect performance? The T9215 CVD-coated carbide grade on the TNMG110412 insert enhances heat resistance and wear behaviour, enabling longer tool life and stable cutting in continuous to lightly interrupted turning. Is the insert reversible or single-use? The TNMG110412 insert is double-sided, allowing indexation to present a fresh cutting edge after one side is used, which improves economy in production. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert fits standard ISO turning holders designed for TNMG-format inserts. Can this insert cope with interrupted cuts? The TNMG110412 T9215 is suitable for continuous to light interrupted cuts; for heavy interruptions, a grade with higher toughness should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable edge strength and ISO compatibility for consistent, high-throughput turning operations; order directly via Metav Werkzeuge or consult the specialists for application-specific advice. TNMG110412 T9215 Turning insert, ISO triangular, 60° — Tungaloy The TNMG110412 T9215 is a triangular ISO indexable insert designed for medium steel turning, offering CVD-coated cemented carbide and a 60° cutting geometry for productive continuous or lightly interrupted cuts. *TNMG geometry, ISO 60° triangular *CVD-coated cemented carbide T9215 *Corner radius 1.2 mm for robust edges *Double-sided chipbreaker with cylindrical hole Consistent productivity and wear resistance for medium steel turning The TNMG110412 T9215 indexable insert combines a CVD coating with a cemented carbide substrate to deliver prolonged tool life and predictable wear behaviour in medium steel applications. The T9215 grade balances abrasion resistance with fracture toughness, making it suitable for continuous and slightly interrupted cuts where sustained removal rates are required. As an ISO triangular insert with a 60° geometry and a corner radius of 1.2 mm, it provides stable engagement and repeatable form accuracy, which reduces machine downtime and keeps component tolerances within specification. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness. Easy integration into existing turning systems and clear specification The insert is supplied with a cylindrical hole and is double-sided, permitting economical index changes and predictable replacement intervals. The 4.76 mm plate thickness and 11 mm inscribed circle size conform to ISO norms for triangular turning plates, enabling direct interchangeability with many standard holders. The double-sided chipbreaker enhances chip control and surface finish while reducing the risk of edge damage; for users less familiar with chipbreaker function, this means chips are guided away from the cutting zone and the component surface, lowering the chance of re-cutting and marking. Where holder compatibility is uncertain, match the insert form and dimensions to the clamping system to ensure correct seating and clamping force. Practical benefits and application guidance for shop-floor use Specifying the right chipbreaker and grade is decisive: the T9215 grade is recommended as a first choice for medium steel because it combines good wear resistance with breakage safety, supporting higher productivity without sacrificing reliability. For workshops aiming to optimise cycle time, the insert’s geometry and coating enable stable cutting at elevated speeds when machining steels within the recommended application window. For newcomers, note that a smaller corner radius favours finer finishes while a larger radius increases edge strength; the 1.2 mm radius here is a compromise that supports both robustness and acceptable surface quality in standard turning tasks. If material, cutting data or holder choice require further clarification, technical consultation is advised. Contact Metav Werkzeuge for a technical consultation on the Tungaloy TNMG110412 T9215 turning insert or to confirm suitability and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6772317 SKU: 6772317-Tungaloy Manufacturer SKU: TUN6772317 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade/coating: T9215, CVD-coated Facts ISO designation: TNMG110412 Inscribed circle: 11 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Free clearance angle: 0° Insert angle: 60° Hole: with cylindrical hole Special features Triangular plate form Double-sided chipbreaker Compatible with ISO turning holders Suitable for medium steel turning Intended use: turning FAQ What materials is this insert intended for? The TNMG110412 T9215 insert is intended primarily for medium steel turning; the T9215 grade is optimised for a balance of wear resistance and toughness in this material group. How does the chipbreaker affect performance? The double-sided chipbreaker improves chip control and surface finish by directing and breaking chips consistently, reducing the likelihood of chip entanglement and re-cutting during turning operations. Is the insert reversible and how does that affect cost-efficiency? Yes, the insert is double-sided, allowing index changes to present a fresh cutting edge without replacing the body, which increases economic efficiency through extended use of each plate. What holder features must be matched to ensure compatibility? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the chosen holder to guarantee correct seating and clamping security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T9215, a 1.2 mm corner radius and a robust triangular 60° geometry ensures reliable wear resistance and high productivity in medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. TNMG110412 T9215 TNMG ISO turning insert for Drehen by Tungaloy TNMG110412 T9215 is an ISO‑standard indexable insert for turning applications, specified for medium‑steel machining with a CVD coating and a geometry designed for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Triangular 60° geometry, 1.2 mm radius Double-sided chipbreaker for stable cutting With cylindrical hole for secure clamping Productive medium‑steel turning with optimised wear resistance This indexable insert is engineered for productive turning of medium‑grade steels. The CVD coating on the carbide substrate provides a high resistance to abrasive wear while the substrate toughness supports fracture resistance during longer runs. As a result, the insert delivers a reliable tool life under steady production conditions and helps to maintain consistent component quality. The combination of coating and substrate is particularly suited to continuous machining and short interruptions, offering a measurable improvement in process stability. ISO compatibility and how to match the correct holder The insert belongs to the ISO insert series, so compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The triangular TNMG form with a 60° cutting angle and a cylindrical hole requires a matching ISO‑type outside holder or boring bar plus the correct backing/clamp set and replacement screws. Checking these parameters minimises setup time and reduces the risk of incorrect seating. For retrofit or new tool assemblies, the specification ensures predictable fitment and straightforward interchangeability across standard toolholders. Geometry and chip control for stable, repeatable results With a 1.2 mm corner radius and a double‑sided chipbreaker, the insert balances strength and chip control to produce consistent surface finishes and dimensional stability. The triangular shape allows indexability to use both cutting edges, improving economy per insert. In practice, the result is fewer insert changes and longer uninterrupted production cycles, which supports higher overall throughput. For applications where moderate interruptions occur, the insert’s toughness reduces the risk of edge chipping and unplanned stoppages. Contact Metav Werkzeuge to discuss matching holders, availability of the Tungaloy T9215 inserts and practical recommendations for integrating them into current turning setups Technical Data Article number: 6966266 SKU: 6966266-Tungaloy Manufacturer SKU: TUN6966266 Model series: ISO-Drehwendeschneidplatten Grade: T9215 Coating: CVD Material: carbide Application: Drehen Core data Corner radius: 1.2 mm Thickness: 4.76 mm Size (inscribed circle): 11 mm Cutting angle: 60° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features Triangular plate form Double-sided chipbreaker ISO-standard turning insert Suitable for continuous to light interrupted cuts System composition: insert + holder or bar + backing/clamp set + replacement screws FAQ What materials is the TNMG110412 T9215 suited for? The TNMG110412 T9215 insert by Tungaloy is optimised for medium‑grade steel machining and combines wear resistance with fracture toughness for stable turning performance. Is the TNMG110412 T9215 compatible with standard ISO holders? Yes, the TNMG110412 T9215 is an ISO‑standard indexable insert; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so use a matching ISO‑type holder. How does the T9215 grade influence tool life? The T9215 grade on the TNMG110412 insert features a CVD coating over a carbide substrate, which increases abrasive wear resistance and supports longer tool life in continuous machining of steels. Can the TNMG110412 T9215 handle interrupted cuts? The TNMG110412 T9215 is suitable for continuous to lightly interrupted cuts; the carbide substrate and chipbreaker geometry help resist edge chipping in such conditions. What is the corner radius and how does it affect the finish? The insert has a 1.2 mm corner radius, which provides a balance between edge strength and surface finish, supporting repeatable dimensional control during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise TNMG geometry and a double-sided chipbreaker for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for specific machining advice. TNMG 110412 T9225 indexable turning insert by Tungaloy — ISO geometry for turning TNMG110412 T9225 Tungaloy indexable insert designed for turning applications, offering a robust universal grade suited to varying engagement conditions and interrupted cuts TNMG 110412 ISO form CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Double-sided chipbreaker, cylindrical hole Consistent chip control for stable turning results The combination of a double-sided chipbreaker and a CVD-coated carbide substrate ensures predictable chip formation and reduced machining interruptions. Designed as an indexable insert for turning, the insert maintains edge integrity under changing cut conditions, which leads to longer effective tool life and fewer tool changes. Its T9225 grade provides a balanced mix of hardness and toughness, so operators benefit from consistent surface quality and reduced downtime during medium to heavy steel machining. Geometry that simplifies setup and increases compatibility With a triangular form, a 60° included angle and a 1.2 mm corner radius, the insert gives a clear profile for clearance and cutting engagement. The 0° clearance angle and the standard ISO dimensions make the insert compatible with a wide range of ISO external holders when form, clearance, tolerance class, fastening method, size and thickness match. This predictable geometry reduces trial-and-error during setup and helps integrate the insert into existing tool inventories quickly, lowering setup time and improving throughput. Workshop reliability and economical inventory management A double-sided design doubles the number of usable edges per insert, supporting lower stocking requirements and improved cost efficiency per cutting edge. The carbide substrate and CVD coating resist flank wear while preserving a reliable cutting edge under interrupted cuts, which is useful for mixed production runs. The insert’s hole with cylindrical style enables secure clamping and straightforward replacement, contributing to steady production flow and simplified maintenance routines. Discuss the TNMG 110412 T9225 Tungaloy indexable insert with Metav Werkzeuge for tailored machining recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific guidance Technical data Article number: 6780657 Manufacturer SKU: TUN6780657 SKU: 6780657-Tungaloy Model series: ISO indexable turning inserts Material: carbide Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Thickness: 4.76 mm Size: 11 mm Special features ISO design TNMG110412 Grade: T9225 (CVD-coated carbide) Triangular form, with cylindrical hole Double-sided chipbreaker Application: turning; suitable for medium to heavy steel machining FAQ What materials is this insert suited for? The TNMG110412 T9225 Tungaloy indexable insert (SKU 6780657-Tungaloy) is formulated for medium to heavy steel machining and performs well under variable engagement conditions. How many cutting edges does each insert provide? Each triangular insert is double-sided, providing multiple usable edges before replacement and supporting economical inventory management. Is the insert compatible with standard ISO turning holders? Compatibility is achieved when holder form, clearance angle, tolerance class, fastening method, size and thickness match the ISO insert; the TNMG110412 follows ISO geometry for straightforward integration. What benefit does the T9225 grade deliver? The T9225 grade combines wear resistance and toughness via a CVD coating on carbide, extending edge life and stabilising performance in interrupted or varying cuts. Does the insert require a specific clamping screw or seat? The insert features a cylindrical hole for secure clamping; pairing with the correct ISO external holder and recommended clamping hardware ensures repeatable positioning and safety. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110412 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 for robust, reliable material removal and the 60° triangular geometry for stable seating; this combination delivers consistent medium-to-heavy steel turning and economical edge utilisation. Order the insert from Metav Werkzeuge or consult our specialists for application advice. TNMG110412 T9225 TNMG ISO 110412 turning insert — Tungaloy TNMG110412 T9225 Tungaloy indexable insert for precision external and internal turning in ISO systems, combining a tough universal grade with a 60° triangular form for secure clamping and sustained performance CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel 60° triangular geometry, 1.2 mm corner radius Double-sided insert with cylindrical hole Consistent cutting performance for medium-to-heavy steel The CVD-coated carbide grade T9225 is formulated for a balance of toughness and wear resistance, making it suitable for interrupted cuts and variable engagement. As an ISO indexable insert, the design prioritises predictable flank wear and stable tool life, which reduces unplanned downtime and improves process reliability. The result is a measurable improvement in cycle consistency and fewer insert changes for comparable operations. Secure seating and economical edge use in ISO turning systems Compatibility with ISO holders is determined by shape, clearance angle, tolerance class, fastening, size and thickness; the TNMG110412 matches these standards to ensure proper fit. The 60° geometry and double-sided configuration yield two re-usable cutting edges, while the cylindrical hole supports secure clamping and repeatable positioning. This construction translates into efficient edge utilisation and simplified inventory management for indexable tooling. Practical application guidance and machining benefits With a 1.2 mm corner radius and a 4.76 mm thickness, this triangular insert offers robustness where radial engagement is significant, helping to maintain surface integrity on workpieces during heavier passes. The insert is intended for turning operations — external and internal — and performs best when the chipbreaker and grade are matched to the material and cutting conditions. Selecting the appropriate chipbreaker and stable set-up will deliver improved surface finish and extended tool life while keeping machining costs predictable. Contact Metav Werkzeuge for application recommendations or to request the TNMG110412 T9225 insert from Tungaloy — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6966267 Manufacturer SKU: TUN6966267 Our SKU: 6966267-Tungaloy Model series: ISO indexable turning inserts Designation: TNMG110412 Facts Corner radius: 1.2 mm Clearance angle: 0° Thickness: 4.76 mm Inscribed circle / size: 11 Geometry angle: 60° Manufacturer article number: 6966267 Special features Material: Carbide Coating: CVD Grade: T9225 Shape: Triangular Double-sided with cylindrical hole Double-sided chipbreaker Application: Turning (external and internal) ISO-compliant insert FAQ What materials is this insert suited for? The TNMG110412 T9225 from Tungaloy is a universal grade optimised for medium-to-heavy steel machining and performs well under changing engagement and light interruptions. Can the insert be indexed for additional cutting edges? Yes, the insert is double-sided, allowing rotation to a fresh edge and providing economical utilisation of each indexable cutting surface. How does the CVD coating benefit machining? The CVD-coated layer on the carbide substrate improves wear resistance at elevated temperatures and contributes to consistent tool life in demanding turning cycles. Is the TNMG110412 compatible with standard ISO holders? The insert conforms to ISO indexing dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness as specified for ISO systems. What role does the cylindrical hole play? The cylindrical hole supports accurate seating and secure clamping, reducing the risk of movement under heavy cuts and improving repeatability of the tool setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160304 TH10 Wendeplatten - Tungaloy
Efficient machining of non‑ferrous materials with a sharp, uncoated TH10 grade, reliable ISO compatibility thanks to the 60° triangular form, and a 0.4 mm corner radius for fine surface finish — order directly via Metav Werkzeuge or consult our advisers for selection and holder matching. TNMG 160304 TH10 ISO indexable turning insert for turning (Tungaloy) The TNMG160304 TH10 is an ISO‑standard triangular indexable insert intended for external and internal turning, optimised to deliver low cutting forces and clean surface finishes in non‑ferrous materials. ISO‑standard triangular insert 60° Uncoated carbide TH10 for non‑ferrous materials Double-sided chipbreaker for versatile cutting Cylindrical hole for secure clamping 0.4 mm corner radius for refined surface finish Consistent fit in ISO tool systems for predictable production The ISO conformity of the insert ensures repeatable clamping and predictable machining results when paired with a matching holder or boring bar. Compatibility is determined by insert form, 0° relief angle, tolerance class, fixation method, nominal size and thickness. Using ISO‑defined components reduces setup time and supports stable production runs, because the insert geometry matches standard clamping elements and shims. Lower cutting forces and improved surface quality with TH10 The uncoated TH10 grade is a sharp universal cemented carbide designed for applications where reduced cutting resistance and clean finishes matter. For non‑ferrous components, an uncoated cutting edge commonly limits material adhesion and burring, which helps to maintain surface integrity and reduces secondary finishing. The result is efficient metal removal with a focus on dimensional quality and reduced risk of built‑up edge. Versatile chip control and practical clamp design for everyday shop use The double‑sided chipbreaker gives flexibility across a range of turning tasks, supporting different cutting conditions without changing the insert geometry. The insert’s cylindrical hole accommodates standard clamping screws and positive clamps, enabling secure fixation and easy indexability. These features combine to cut down on machine downtime and simplify tool change procedures in mixed‑batch production. Robust geometry for stable cutting and fine finishing A 0.4 mm corner radius paired with a 3.18 mm plate thickness provides a balance between edge strength and surface quality, helping to avoid premature edge chipping while achieving the desired finish. The triangular 60° form allows multiple indexable cutting edges, which is economical in use and supports long production sequences when correctly integrated into the tool system. Contact Metav Werkzeuge today to discuss matching Tungaloy TH10 inserts and holders for the specific turning application — Metav Werkzeuge can advise on selection, clamping options and supply the TNMG 160304 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808318 Manufacturer SKU: TUN6808318 Manufacturer item name: TNMG160304 TH10 Tungaloy‑insert Facts Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed circle / size: 16 mm Insert angle: 60° Relief angle: 0° Special features Uncoated cemented carbide grade TH10 Double‑sided chipbreaker Triangular insert, ISO TNMG form Cylindrical hole for clamping For external and internal turning System components: insert, holder/boring bar, shim/clamp set and screws FAQ Will this insert fit standard TNMG holders? Compatibility depends on matching the ISO form, relief angle, tolerance class, fixation and thickness; the TNMG160304 TH10 (Tungaloy, SKU TUN6808318) follows ISO dimensions and fits holders designed for TNMG 160304 inserts. Which materials are best suited to the TH10 grade? TH10 is an uncoated cemented carbide grade optimised for non‑ferrous materials such as aluminium and brass where low cutting forces and clean surfaces are required. Can the insert be used for internal turning as well as external turning? Yes, the insert is intended for both external and internal turning applications and provides versatile chip control for a range of turning tasks. How does the double‑sided chipbreaker help in production? A double‑sided chipbreaker offers flexibility under varied cutting conditions and can be indexed to extend usable tool life, improving productivity and reducing tool change frequency. What are the key dimensions to check before ordering? Check the insert size (16 mm), thickness (3.18 mm), corner radius (0.4 mm) and the cylindrical hole style to ensure compatibility with the intended clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, clean surface results and straightforward ISO compatibility for efficient turning operations; order the insert via Metav Werkzeuge or consult their specialists for application support. TNMG 160308 TH10 indexable turning insert by Tungaloy — triangular, 60° cutting angle TNMG160308 TH10 is an ISO‑compatible indexable insert designed for external and internal turning, offering an uncoated carbide edge that supports low cutting forces and improved surface quality. TNMG geometry, 60° triangular insert Uncoated carbide grade TH10 for low cutting forces Double-sided chipbreaker for versatile turning Central cylindrical hole for secure clamping Dependable chip control through a sharp uncoated cutting edge The insert provides reliable metal removal by combining a TH10 uncoated grade with a precision ground cutting edge and an integrated double-sided chipbreaker. This configuration reduces cutting forces and supports consistent chip control, which is especially beneficial when machining non-ferrous materials and when a clean part face is required. The absence of a coating lowers the contact temperature and helps to maintain a sharp edge, assisting in achieving superior surface finish with lower drive power — a clear operational advantage in high‑mix small‑batch production and retrofit turning tasks. Stable clamping and ISO conformity for rapid tool changeovers Manufactured to the ISO 160308 specification, the insert fits holders that match the form, tolerance class, fastening method, size and thickness. Key geometry values such as the 60° included angle, 0.8 mm radius and 3.18 mm thickness ensure predictable engagement with standard external and internal holders. A cylindrical hole in the centre provides positive locating and secure clamping, reducing vibration and promoting repeatable positioning during index changes. This standardised approach shortens changeover time and lowers process variability in production cells. Versatile, economical solution for turning applications The triangular shape and double-sided design enable multiple indexing positions, extending the usable life of each insert and improving overall cost efficiency. Suitable primarily for turning tasks where low cutting forces and neat finishes are priorities, the grade supports operations on aluminium, brass and other non‑ferrous alloys. The robust cemented carbide composition gives dependable wear resistance while the uncoated edge minimises built‑up edge formation in delicate materials. For shops seeking a technically clear and practical insert choice, this option balances productivity and straightforward application planning. For reliable, low‑force turning with proven Tungaloy technology, request availability and application advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical Data Article number: 6808328 Manufacturer article number: 6808328 Manufacturer SKU: TUN6808328 Seller SKU: 6808328-Tungaloy Dimensions and core data Inscribed circle / size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° ISO designation: 160308 Special features and applications Material: cemented carbide (uncoated) Grade: TH10 Shape: triangular Chipbreaker: double-sided Hole: with cylindrical hole for clamping Typical application: external and internal turning Optimised for non‑ferrous materials and low cutting force operations System setup: ISO insert, compatible holder, clamp set and replacement screws FAQ Which materials is this insert best suited to machine? The TNMG160308 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated cutting edge supports low cutting forces and clean surfaces. Is the insert reversible and how many cutting edges are available? Yes — the triangular geometry with a double‑sided chipbreaker provides multiple indexable edges, allowing several repositions before disposal. What dimensions and tolerances should the holder match? Holders must match the ISO 160308 form: 16 mm inscribed circle, 3.18 mm thickness and the 60° included angle, with correct tolerance class and fastening method for secure clamping. Does this insert have a coating or special surface treatment? The product is an uncoated carbide insert in grade TH10, chosen to deliver a sharp edge and reduced cutting forces for the intended material range. How does the central hole affect clamping and stability? The cylindrical hole provides positive location and enables secure clamping, which reduces vibration and improves repeatability during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160402 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade designed for wear and notch resistance, a precise 60° geometry and a 0.2 mm corner radius for predictable surface finish and tool life. Order the insert directly via Metav Werkzeuge or consult the team for compatibility with existing holders and clamping sets. TNMG 160402 AH120 – Turning indexable insert by Tungaloy, triangular ISO insert with 60° geometry The TNMG 160402 AH120 is an ISO-standard triangular indexable insert intended for general external and internal turning operations, engineered to deliver a sharp cutting edge, stable chip formation and reliable process security. ISO triangular indexable insert TNMG 160402 AH120 PVD-coated carbide grade AH120 for wear resistance 60° geometry with 0° clearance angle Double-sided chipbreaker, cylindrical hole design Consistent process security through engineered geometry The triangular indexable insert offers a defined 60° geometry that supports repeatable cutting conditions in serial production. The combination of a sharp, wear-resistant PVD-coated carbide grade and a controlled 0.2 mm corner radius produces consistent surface quality and reduces the risk of edge chipping during interrupted cuts. For workshop planners, this results in fewer tool changes and steadier cycle times, which improves throughput and reduces unexpected downtime. Broad compatibility with ISO toolholders for straightforward integration Designed as an ISO-standard turning plate, the insert matches holders by form, clearance angle and tolerance class, and is supplied with a cylindrical hole for secure clamping. The 4.76 mm thickness and 16 mm inscribed circle make it suitable for a wide range of external and internal holders; systems comprise the insert, the corresponding outer holder or boring bar, a seating/locking kit and replacement screws. This compatibility simplifies procurement and enables quick setup in mixed-machine environments. Durable cutting performance from the AH120 carbide grade The AH120 grade is a PVD-coated carbide selected for resistance to flank wear and chipping while maintaining a sharp cutting edge for finishing and light- to medium-duty roughing. The double-sided chipbreaker supports reliable chip control across varying steels and cast irons, aiding thermal stability and surface finish. For operations requiring predictable tool life and minimal process variation, the insert’s construction provides measurable benefits in repeatability and component quality. Contact Metav Werkzeuge for supply and application advice on Tungaloy TNMG 160402 AH120 inserts; email info@metav-werkzeuge.com or phone +49 2822 7131930 for fast, application-oriented support Technical data Article number: 6854301 SKU: 6854301-Tungaloy Manufacturer SKU: TUN6854301 Manufacturer: Tungaloy Facts ISO designation: 160402 Inscribed circle (IC): 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Hole: cylindrical Special features Material: carbide Coating: PVD Grade: AH120 Shape: triangular Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO toolholders and boring bars System components: insert, holder, seating/locking set, replacement screws FAQ What materials is this insert suited for? The TNMG 160402 AH120 insert is specified for turning applications and performs well on a wide range of steels and cast irons thanks to the AH120 PVD-coated carbide grade. How does the AH120 grade affect tool life? The AH120 grade provides improved resistance to wear and chipping, which extends cutting edge life and supports consistent dimensional results when using the TNMG 160402 insert. Is the insert reversible or single-use per edge? The TNMG 160402 is double-sided with a triangular form, offering multiple indexing positions to make use of fresh cutting edges and extend effective service life. Which holders are compatible with this ISO plate? Compatibility is based on the ISO form, clearance angle, tolerance class, clamping method, size and thickness; the TNMG 160402 fits standard ISO turning holders and appropriate boring bars when matched accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com