TNMG 160404 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of a coated cermet AT9530 grade, a precise 0.4 mm corner radius and a 60° triangular geometry for consistent finishing results and prolonged edge life; order the TNMG160404 AT9530 insert directly via Metav Werkzeuge or ask our consultants for compatibility advice. TNMG160404 AT9530 — TNMG ISO 160404 indexable turning insert for finishing, Tungaloy The TNMG160404 AT9530 is an ISO indexable turning insert engineered for finishing and light turning of steel, offering a coated cermet cutting grade optimised for surface quality and even wear. Coated cermet grade AT9530 for finishing Double-sided chipbreaker for consistent wear 60° triangular shape with 0.4 mm radius Achieve superior surface finish with a cermet cutting grade The combination of a coated cermet cutting material and a carefully controlled corner radius delivers a measurable improvement in surface quality during finishing passes. Cermet grades are engineered to retain hardness at elevated temperatures and to produce a fine, stable cutting edge; this results in a uniform wear pattern and reduced burr formation on turned parts. The specified 0.4 mm corner radius supports low-vibration engagement in light cuts, helping to maintain dimensional accuracy and to reduce the need for rework. Where surface appearance and repeatability matter, this insert provides a balance between edge strength and a fine cutting action. Stable chip control and consistent process reliability A double-sided chipbreaker combined with the insert’s geometry improves chip formation and evacuation in a range of turning conditions. Consistent chip control reduces the risk of chip packing and tool interference, which in turn lowers machine downtime and scrap rates. The insert is manufactured to ISO dimensional standards so that clamping, tolerance class and form determine holder compatibility; the presence of a cylindrical central hole permits secure fastening and precise seating in matched toolholders. For production environments that prioritise cycle stability and predictable tool life, the insert’s features support continuous, repeatable machining. Easy integration into ISO tooling systems for cost-efficiency Designed as an ISO TNMG format, the insert fits established indexable tool systems when paired with the appropriate holder and clamping kit. Key dimensional data such as 16 mm inscribed circle, 4.76 mm thickness and 60° included angle simplify selection of compatible holders and reduce inventory complexity. The insert’s coated cermet AT9530 chemistry is intended for finishing and light turning of steel, making it possible to consolidate grades across similar applications and to lower tooling costs through predictable edge life. Choosing a single, defined insert family for finish operations can shorten set-up times and improve overall process economy. Practical handling, indexing and application notes The triangular plate form provides multiple indexable edges and, when combined with the double-sided chipbreaker, increases the total number of usable cutting edges before disposal. With a relief angle of 0°, the insert suits a broad range of external and internal turning set-ups; however, correct selection of holder geometry and cutting parameters remains essential to exploit the grade’s advantages. Light finishing cuts at moderate feeds and cutting speeds appropriate for cermet grades yield the best surface results. For unfamiliar applications, testing under representative conditions is recommended to identify the optimal combination of speed, feed and depth of cut. For finishing and light-turning tasks using Tungaloy technology, contact Metav Werkzeuge for tailored cutting data and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TNMG160404 AT9530 and system integration. Technical data Article number: 6762985 Manufacturer SKU: TUN6762985 Model series: ISO turning indexable inserts Facts Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6762985 Special features Coated cermet grade AT9530 Double-sided chipbreaker ISO designation: TNMG160404 Triangular plate form, cylindrical central hole Application: finishing and light turning of steel FAQ Which materials is this insert suited for? The TNMG160404 AT9530 insert is optimised for finishing and light turning of steel, with the coated cermet grade providing a fine cutting edge and uniform wear for improved surface quality. How many indexable edges are available on the plate? Due to the triangular plate form and double-sided construction, the insert offers multiple usable cutting edges; this extends cost-effective life before replacement of the TNMG160404 AT9530. What determines compatibility with a toolholder? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO TNMG format and the 16 mm inscribed circle simplify selection of matching holders. Is the chipbreaker suitable for mixed turning operations? The double-sided chipbreaker supports predictable chip formation in finishing and light operations; selection of an alternative chipbreaker style is advised when heavier roughing cuts are required. What is the recommended approach to set cutting data? Begin with conservative speeds and feeds appropriate for cermet grades, then adjust to achieve the desired surface finish and stable chip form; request Metav Werkzeuge cutting data for application-specific guidance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
The combination of GH330 wear resistance, an ISO‑standard triangular geometry and a 0.4 mm corner radius provides stable cutting performance and predictable tool life for routine turning operations. Order the TNMG 160404 GH330 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 GH330 Turning insert by Tungaloy – carbide grade GH330, 60° triangle The TNMG 160404 GH330 is an ISO‑standard triangular turning insert designed for general external and internal turning where a balance of wear resistance and edge stability is required. TNMG triangular ISO insert 60° chip geometry GH330 grade for wear resistance and edge life Double-sided with cylindrical hole for secure fixing 0.4 mm corner radius for consistent dimensional control Reliable performance through a wear‑resistant grade The use of the GH330 Tungaloy carbide grade delivers a controlled combination of hardness and toughness, which translates into longer cutting life under mixed cutting conditions. For production environments where consistent component quality and reduced downtime are priorities, the insert’s composition reduces the frequency of index changes and tool interventions. In addition to durability, this grade supports steady results when machining a broad range of steels and common ferrous materials, making it a cost‑effective choice for series turning and frequent tool exchanges. Geometry and design that support accuracy and clamping security The triangular 60° insert form, with its 0.4 mm corner radius and 4.76 mm thickness, offers a stable cutting edge and predictable contact geometry at the tool tip. The double‑sided design effectively doubles the usable edge life per insert, while the cylindrical hole and standard fixing format provide a secure seat in compatible holders. These geometric details ensure repeatable component tolerances and straightforward index changes, which are particularly beneficial in batch production and setups that demand fast insert rotation without compromising accuracy. ISO compatibility and versatile machining scope Being part of an ISO turning insert series ensures compatibility with a wide range of external holders and boring bars, subject to matching form, relief angle, tolerance class, fastening and size. The insert is intended for general external and internal turning; the double‑sided chipbreaker and the choice of grade permit adaptation to different workpiece materials and cutting modes. Select a chipbreaker and insert grade according to material, operation and machine stability to achieve optimised chip control and surface finish without over‑complicating tool inventories. Practical selection and maintenance for a productive workflow Incorporating these inserts into a coherent system—insert, matching holder, support/clamp set and replacement screws—reduces setup time and simplifies stock management. The ISO designation (TNMG160404) makes it easy to match spare inserts and replacement parts, while the robust grade supports longer intervals between changes. For application advice, selection of the correct chipbreaker or to confirm holder compatibility, Metav Werkzeuge provides technical guidance and practical support to assist with implementation and to help maintain consistent cycle times. For genuine Tungaloy TNMG 160404 GH330 turning inserts and expert application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and request part TUN6808392 Technical Data Article number: 6808392 Manufacturer SKU: TUN6808392 SKU: 6808392-Tungaloy Material: carbide Model series: ISO turning indexable inserts Numbers / Core technical data ISO designation: 160404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief angle: 0° Designs / Special features Triangular plate form Double‑sided with chipbreaker With cylindrical hole for fixing Grade: GH330 (Tungaloy) Intended use: turning (external and internal) System components: insert, holder, clamp set, spare screws FAQ What types of turning is this insert suitable for? The TNMG 160404 GH330 turning insert is designed for both external and internal turning applications, offering a balance of wear resistance and edge stability for general steel machining. How does the GH330 grade affect tool life? The GH330 grade provides a blend of hardness and toughness that improves wear resistance and edge stability, extending the interval between index changes for the TNMG 160404 insert. Is the insert compatible with standard ISO TNMG holders? The insert follows ISO dimensional standards; compatibility with a holder depends on matching form, relief angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Combine ISO compatibility, a GH330 wear-resistant grade and a precise 60° geometry to secure consistent turning performance and long tool life; order the TNMG160404 GH330 insert directly via Metav Werkzeuge or consult our team for selection guidance. TNMG 160404 GH330 indexable insert for turning, 60° triangle by Tungaloy A TNMG160404 GH330 indexable insert engineered for external and internal turning with a double-sided chipbreaker and a cylindrical fixing hole. ISO‑compatible triangular insert, 60° Carbide grade GH330 for balanced wear resistance Double‑sided chipbreaker for consistent chip control Cylindrical hole for secure clamping Reliable performance and ISO compatibility for production turning The triangular indexable insert features a 60° cutting angle and is manufactured to ISO tolerances, ensuring interchangeability with standard holders. This standardised geometry simplifies tool inventory and reduces spindle downtime because inserts can be replaced without requalifying the holder. The insert is produced from carbide, giving a controlled hardness and fracture resistance that supports steady cutting under varied conditions. Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. Balanced grade GH330 for wear resistance and edge stability The GH330 grade is a Tungaloy development that blends wear resistance with sufficient toughness to maintain edge stability in common turning tasks. The grade complements the insert geometry to resist flank wear while avoiding premature chipping, which improves component quality and extends index life. Where surface finish and repeatability are priorities, the grade’s formulation supports predictable tool life and consistent results across batch runs. Practical chip control and secure clamping for process reliability A double-sided chipbreaker on this insert enables effective chip segmentation in both directions of use, reducing the risk of built-up edge and improving evacuation in through‑cut and parting operations. The insert’s cylindrical hole and standard mounting interface allow secure clamping in the pocket, enhancing repeatable positioning and minimising vibration. These features combine to reduce rework and support higher feed rates where machine rigidity permits. Application guidance and selection advice for turning tasks Designed for general turning, the insert suits external and internal operations on a broad range of steels and similar materials when matched with the correct chipbreaker and cutting data. Selection should consider workpiece material, machining stability and required surface finish; a tougher grade or altered geometry may be chosen for interrupted cuts or unstable set‑ups. For precise recommendations, machinability and process parameters can be reviewed with Metav Werkzeuge to match speeds, feeds and depth of cut to the Tungaloy grade and insert geometry. For reliable turning and optimised tool life choose the Tungaloy GH330 insert — contact Metav Werkzeuge for availability and tailored application advice. Technical data Article number: 6808384 Manufacturer SKU: TUN6808384 SKU: 6808384-Tungaloy Product designation: TNMG160404 GH330 Series: ISO indexable turning inserts Numbers / Core technical data Insert form: triangular, 60° ISO code: 160404 Corner radius: 0.4 mm Rake angle: 0° Plate size: 16 mm Special features / Versions Material: carbide Grade: GH330 Chipbreaker: double-sided Fixing: cylindrical hole Application: turning (external and internal) Compatibility: ISO‑standard holders and tool systems FAQ What materials is this insert suitable for? The TNMG160404 GH330 insert (Tungaloy indexable insert, SKU 6808384-Tungaloy) is intended for turning a wide range of steels and comparable materials when matched with appropriate cutting data. How does the GH330 grade affect tool life? The GH330 grade balances wear resistance and toughness to extend service life under steady cutting conditions and to prevent premature chipping during general turning. Can this insert be used for internal turning? Yes, the triangular TNMG geometry and double-sided chipbreaker are suitable for both external and internal turning applications when the correct holder and reach are selected. What does the ISO code 160404 indicate? The ISO code 160404 denotes the insert size and geometry family; it helps ensure interchangeability with ISO‑compliant holders and tool systems. Is the insert reversible and how is it clamped? The insert is double-sided (reversible) and secured via a cylindrical hole, allowing secure clamping and repeatable positioning in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, GH330 carbide grade and a double‑sided chipbreaker for reliable, repeatable turning performance; order directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. TNMG160404 GH330 TNMG turning insert, ISO 160404 — Tungaloy The TNMG160404 GH330 is an ISO‑format triangular indexable insert for turning, designed for both external and internal turning applications and compatible with standard clamped or bored holders. ISO 60° triangular insert, ISO 160404 GH330 grade for wear resistance Double‑sided chipbreaker for reliable chips With cylindrical hole for secure clamping Optimised performance for turning processes The insert delivers a balance of wear resistance and edge stability through the GH330 Tungaloy grade and carbide construction, making it suitable for demanding turning cycles. The ISO geometry provides a fixed 60° cutting angle that supports stable cutting forces and predictable tool life. With a double‑sided chipbreaker, chip formation is controlled across a range of cutting conditions, reducing interruptions and improving throughput. These features combine to raise process efficiency and reduce downtime in a production environment. Clear compatibility and secure mounting Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert features a 0° clearance specification and a cylindrical hole for positive locating. The triangular plate form and the standard ISO designation simplify holder selection and replacement in existing tool systems. Clear data on dimensions and hole style allows planners to match the insert to clamped or bored holders without guesswork, ensuring correct clamping force and repeatable positioning for high‑precision turning. Grade selection and consistent chip control The GH330 grade extends edge life while retaining sufficient toughness for interrupted cuts and variable workpiece stability. Choosing the correct chipbreaker and grade is crucial: the double‑sided breaker on this insert supports both coarse and finer chip segmentation depending on feed, depth and material, which improves surface finish and reduces rework. The carbide substrate provides thermal and mechanical resistance that helps maintain cutting edge geometry over long production runs, supporting consistent part quality and a predictable maintenance schedule. For expert selection and rapid supply of GH330 Tungaloy inserts, contact Metav Werkzeuge to verify holder compatibility and secure the correct TNMG160404 inserts for streamlined turning operations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6808352 Manufacturer SKU: TUN6808352 SKU: 6808352-Tungaloy Model series: ISO turning indexable inserts ISO designation: TNMG160404 Material: carbide Grade: GH330 Facts Cutting angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Special features Plate form: triangular Hole style: cylindrical hole Chipbreaker: double‑sided Application: turning Schneidstofftyp: Tungaloy carbide grade FAQ What applications is this insert best suited for? The TNMG160404 GH330 Tungaloy turning insert is intended for external and internal turning operations and is compatible with standard ISO toolholders. How does the GH330 grade influence performance? The GH330 grade provides a balance of wear resistance and toughness so the TNMG160404 insert maintains edge stability across varying cutting conditions. Can the insert be used in clamped and bored holders? Yes — the TNMG160404 has a cylindrical hole and standard ISO geometry to allow secure clamping in both clamped and bored holder systems. What chip control can be expected from this geometry? The double‑sided chipbreaker on the TNMG160404 promotes reliable chip formation and easier evacuation, improving surface finish and process stability. How is the insert identified for replacement and stock management? Refer to the ISO designation TNMG160404, the manufacturer SKU TUN6808352 and article number 6808352 for ordering and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, GH330 carbide grade and precise corner radius for consistent turning results; the insert delivers wear resistance and edge stability for both external and internal turning. Order the TNMG160404 GH330 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 GH330 Tungaloy — Indexable insert for turning, triangular 16 mm, 0.4 mm radius TNMG 160404 GH330 is an ISO‑standard indexable insert designed for versatile turning applications, providing a balance of wear resistance and edge stability in a triangular form suitable for external and internal operations. ISO‑standard TNMG 160404 geometry GH330 grade for wear resistance and edge stability Double‑sided insert with 0.4 mm corner radius Precision and productivity for modern turning operations The TNMG160404 GH330 indexable insert combines cemented carbide substrate and a Tungaloy carbide grade engineered for prolonged performance. The GH330 composition optimises the trade‑off between hardness and toughness, reducing flank and crater wear under mixed cutting conditions. With a 0.4 mm corner radius and ISO‑defined TNMG geometry, the insert supports repeatable cutting engagement and predictable tool life, which lowers tool change frequency and contributes to steady cycle times. As a result, machining centres and lathes benefit from improved uptime and lower overall tooling cost per part. Compatibility and handling for secure clamping The triangular form with a cylindrical hole and central mounting ensures secure fixation in compatible holders; compatibility depends on form, relief angle, tolerance class, fastening and insert thickness. The insert’s 4.76 mm thickness and 16 mm inscribed circle match common ISO TNMG holders, while the 0° relief angle and 60° included angle define the contact geometry required for radial and axial support. Using a matching clamping system and the appropriate double‑sided chipbreaker allows both external and internal turning with consistent chip control and reduced vibration, leading to a superior surface finish and repeatable tolerances. Material behaviour and application advantages Manufactured from cemented carbide and specified for turning, the grade is suitable where a balance of wear resistance and edge stability is needed; the double‑sided chipbreaker on this insert aids reliable chip formation across a range of steels and alloyed materials. The ISO‑compliant design simplifies inventory management and ensures interchangeability across machines that accept TNMG inserts. When paired with a robust holder and the correct feed‑speed parameters, the insert contributes to predictable tool life and process stability, which supports continuous production and consistent component quality. For product availability, cutting data recommendations and ordering of the TNMG160404 GH330 Tungaloy indexable insert, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast delivery. Technical Data Article number: 6808371 SKU: 6808371-Tungaloy Manufacturer SKU: TUN6808371 Model series: ISO‑turning indexable inserts Material: Cemented carbide Grade: GH330 Facts Corner radius: 0.4 mm Insert thickness: 4.76 mm Inscribed circle (size): 16 mm Included angle: 60° Relief angle: 0° Mounting hole: with cylindrical hole Special features Triangular insert form Double‑sided chipbreaker ISO‑standard TNMG 160404 designation Application: Turning (external and internal) Compatible with standard TNMG holders FAQ What materials is this insert suitable for? The TNMG160404 GH330 Tungaloy insert is specified for turning and is optimised for a broad range of steels and alloyed materials thanks to its GH330 grade, delivering a balance of wear resistance and edge stability. How does the GH330 grade affect tool life? GH330 is a Tungaloy carbide grade that increases wear resistance while maintaining edge toughness; in practice the grade supports longer cutting intervals and stable performance in intermittent and continuous turning. Is the insert reversible and how many cutting edges are available? This is a double‑sided triangular insert; the design provides multiple cutting edges per insert, enabling cost‑efficient use before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of durable GH330 carbide, precise geometry and ISO conformity for stable turning processes; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TNMG 160404 GH330 Tungaloy indexable insert for Turning — triangular ISO insert, 0° relief, 60° lead angle The TNMG160404 GH330 Tungaloy indexable insert is an ISO-standard triangular cemented carbide insert developed for general turning applications, offering a balanced mix of wear resistance and edge stability. ISO triangular insert TNMG 160404 GH330 carbide grade for wear resistance 0° relief with 60° cutting angle Cylindrical-holed, double-sided chipbreaker Consistent edge life and process reliability The combination of GH330 cutting grade and cemented carbide substrate delivers stable wear behaviour and predictable tool life under industrial turning conditions. The grade is tailored to balance hardness and toughness, which reduces unexpected edge failure and enables longer intervals between indexings. For shop-floor planning this translates into fewer interruptions, consistent component quality and improved overall machining economy. Geometry engineered for accurate changeovers The triangular geometry with an inscribed circle dimension of 16 mm, a plate thickness of 4.76 mm and a 0.4 mm corner radius ensures reliable seating and repeatable cutting conditions in ISO-compatible holders. The cylindrical hole and the specified 0° relief with a 60° lead angle permit secure clamping and predictable chip flow; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so changeovers remain quick and deterministic. Machining performance across common turning tasks Designed for both external and internal turning, the insert features a double-sided chipbreaker that supports controlled chip formation and evacuation in a range of feed and depth-of-cut conditions. Selecting the correct chipbreaker and grade combination according to workpiece material and machining stability helps to reduce built-up edge and improve surface finish, while the ISO format simplifies stockkeeping and allows fast replacement during production. Economic advantages through modular tool systems As part of an ISO turning insert system — comprising the indexable plate, a matching external holder or boring bar, a shim/clamp set and replacement screws — this insert supports standardised tooling inventories and fast maintenance procedures. The predictable wear behaviour of the GH330 grade contributes to lower tooling costs per component and a more efficient production flow, making it suitable for batch and continuous turning operations where uptime and repeatability are priorities. For robust, repeatable turning with Tungaloy GH330, contact Metav Werkzeuge for tailored technical advice or to reserve the TNMG160404 insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6808349 Manufacturer article number: 6808349 Manufacturer SKU: TUN6808349 Supplier SKU: 6808349-Tungaloy Model series: ISO turning indexable inserts Designation: TNMG160404 GH330 Core dimensions Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Lead/cutting angle: 60° Features & compatibility Material: cemented carbide Carbide grade: GH330 (Tungaloy) Triangular plate, double-sided chipbreaker Cylindrical hole for secure clamping Intended use: turning; external and internal Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is the TNMG160404 GH330 insert suited for? The TNMG160404 GH330 insert is intended for general turning tasks; the GH330 grade is developed to provide a wide coverage of workpiece materials when the appropriate chipbreaker and cutting data are selected. How does the GH330 grade benefit production runs? GH330 offers a balance of wear resistance and toughness, which helps to maintain edge stability during extended runs and reduces the frequency of unscheduled indexings. Is the insert indexable on both sides? Yes, the plate is double-sided with a chipbreaker on each usable face, allowing rotation and re-indexing to extend the useful life of the insert. Which holder characteristics need to be checked for compatibility? Compatibility depends on holder form, clearance/relief angle, tolerance class, fastening method, and the insert’s size and thickness; ensure the external holder or boring bar matches these parameters. What does the designation TNMG160404 indicate? TNMG160404 is the ISO code for the insert family and includes the geometry and dimensional cues (such as the size and corner radius) used to identify the plate within the ISO-standard range Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide construction, GH330 wear-resistant grade, and ISO compatibility to maintain steady production and predictable tool life; order directly via Metav Werkzeuge or consult the technical team for matching holders and clamping options. TNMG 160404 GH330 indexable turning insert by Tungaloy — triangular ISO insert for external and internal turning, 60° geometry TNMG160404 GH330 Tungaloy turning insert is an ISO-standard triangular indexable insert designed for general turning operations, offering balanced wear resistance and edge stability for a wide range of machining tasks. ISO-standard triangular insert with hole GH330 wear-resistant Tungaloy grade 60° geometry for stable cutting 0.4 mm corner radius for versatile finishes Reliable wear resistance for continuous production The GH330 grade, developed by Tungaloy, combines enhanced wear resistance with sufficient toughness to resist chipping under normal to demanding turning conditions. The carbide substrate ensures consistent cutting behaviour over multiple indexings, which reduces changeover frequency and supports a smoother production flow. Choosing this grade helps to extend tool life while maintaining part quality, especially when combined with the appropriate chipbreaker and machining parameters. Secure clamping and ISO compatibility for predictable setup The triangular form with a cylindrical hole and the ISO designation ensure compatibility with a wide range of standard external holders and boring bars. The 60° cutting angle and specified 0.4 mm corner radius facilitate repeatable seating and predictable cutting engagement. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters reduces setup time and avoids unexpected runout or instability. Optimised geometry for consistent chip control and surface finish The double-sided chipbreaker geometry is designed to manage chips effectively while offering two usable cutting edges per side, making the insert economical in use. The geometry supports both external and internal turning; selecting the correct chipbreaker and grade for the workpiece material and the process stability leads to improved surface finish and reduced risk of built-up edge. For flexible workshop routines, this insert provides a balance between productivity and finish quality. For technical selection support or to source matching holders and clamping sets, contact Metav Werkzeuge — the team can advise on application-matched inserts and supply related accessories quickly and reliably. Technical data Article number: 6808378 Manufacturer SKU: TUN6808378 Our SKU: 6808378-Tungaloy Facts ISO designation: 160404 Insert size: 16 mm Cutting angle: 60° Clearance angle: 0° Corner radius: 0.4 mm Special features Carbide substrate Grade: GH330 (Tungaloy) Triangular insert with cylindrical hole Double-sided chipbreaker ISO turning indexable insert Intended for external and internal turning FAQ What materials is this insert intended for? The TNMG160404 GH330 Tungaloy insert is intended for turning applications where wear resistance and edge stability are priorities; the grade complements the insert geometry and should be selected alongside the appropriate chipbreaker for the specific workpiece material. Is the insert compatible with standard ISO holders? Yes, the TNMG160404 conforms to ISO dimensions and the triangular form with a cylindrical hole is compatible with holders and boring bars designed for TNMG inserts, provided the holder matches form, size and fastening method. How many cutting edges are available per insert? With the double-sided chipbreaker geometry, multiple usable cutting edges are available; the exact count depends on indexing practice, but the design is economical and intended for multiple indexings. What surface finishes can be achieved with this geometry? The 0.4 mm corner radius and optimised chip control support good surface finishes in both external and internal turning when combined with appropriate feeds, speeds and a matching chipbreaker. What identifiers should be quoted when ordering? Quote the designation TNMG160404 GH330, the article number 6808378 and, if needed, the manufacturer SKU TUN6808378 to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, a 0.4 mm corner radius and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160404 GH330 ISO triangular turning insert by Tungaloy — 0° rake, 60° included angle The TNMG160404 GH330 is an ISO‑standard triangular indexable insert designed for external and internal turning applications, offering a balanced mix of wear resistance and edge stability for a wide range of workpiece materials. GH330 wear grade for long tool life Triangular ISO shape for versatile clamping Double-sided chipbreaker for reliable chip control 0.4 mm corner radius for precise finishing Increased process stability through a wear‑resistant grade The GH330 grade, developed by Tungaloy, combines high wear resistance with controlled toughness to extend edge life under typical turning loads. Selecting an insert with this composition reduces the frequency of index changes and contributes to uninterrupted production cycles. The combination of a robust carbide substrate and the designated coating chemistry helps maintain cutting edge integrity during continuous turning operations, which directly supports higher uptime and lower tooling cost per part. Precise geometry for repeatable clamping and surface quality The triangular ISO form with a 60° included angle and a 0° relief angle ensures predictable engagement with standard external and internal holders. The insert’s 0.4 mm corner radius delivers a compromise between edge strength and the ability to achieve fine surface finishes, useful for medium‑tolerance components. Because compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness, the insert integrates with existing toolholders when those criteria are matched, enabling consistent part quality across batches. Stable chip control and efficient material removal Equipped with a double‑sided chipbreaker, the insert supports controlled chip formation for a variety of feeds and depths of cut, reducing the risk of chip entanglement and improving surface integrity. The central cylindrical hole facilitates secure clamping and straightforward indexing, while the two cutting edges per side maximise usable life before disposal. This design improves machining reliability and contributes to predictable cycle times, a key factor when optimising production throughput. Contact Metav Werkzeuge to discuss how the GH330 Tungaloy indexable insert can enhance turning productivity in specific applications or to request tailored recommendations from our technical advisers. Technical Data Article number: 6808368 Manufacturer SKU: TUN6808368 Label: TNMG160404 GH330 Tungaloy‑Wendeplatte Model series: ISO‑Drehwendeschneidplatten Material: carbide Manufacturer article number: 6808368 Core Measurements Insert designation: TNMG160404 Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief (rake) angle: 0° Features & Compatibility Grade: GH330 Chipbreaker: double‑sided Hole: with cylindrical hole Plate form: triangular Application: turning Compatibility criteria: form, relief angle, tolerance class, fixing, size, thickness FAQ What materials can this insert machine effectively? The TNMG160404 GH330 insert is intended for turning a broad range of materials; the GH330 grade prioritises wear resistance while retaining sufficient toughness for many steels and alloyed materials. How many usable cutting edges does the insert provide? The triangular TNMG geometry offers three corners and, combined with the double‑sided design, provides multiple usable edges before replacement is necessary. Is the insert compatible with standard ISO toolholders? Compatibility depends on matching the insert form, relief angle, tolerance class, fixing method, size and thickness; the TNMG160404 conforms to ISO standards for straightforward integration when those parameters align. What benefit does the 0.4 mm corner radius bring to component quality? A 0.4 mm corner radius increases edge strength for interrupted cuts while still allowing improved surface finish compared with larger radii, making it suitable for medium‑tolerance finishing passes. Does the chipbreaker support a range of feeds and depths of cut? Yes, the double‑sided chipbreaker is designed to provide reliable chip formation across typical turning feeds and depths, assisting in process stability and surface integrity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 GT9530 Wendeplatten - Tungaloy
Take advantage of GT9530 performance and the insert's precise geometry for reliable finishing and extended tool life; the ISO conformity ensures quick replacement and minimal setup time. Order the TNMG160404 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 GT9530 – ISO turning insert for turning (Tungaloy) The TNMG160404 GT9530 is an ISO-standard triangular turning insert engineered for finishing and light universal turning of steel under stable machining conditions. GT9530 coated cermet for improved wear resistance Triangular TNMG shape for stable cutting performance Double-sided chipbreaker for consistent chip control 0.4 mm corner radius for fine surface finish Reliable finishing performance and economical tool life The insert uses a coated cermet grade (GT9530) designed to combine wear resistance with an improved surface finish in turning operations. Cermet grades offer a harder edge and better oxidation resistance than conventional carbides, which translates into fewer tool changes and more consistent part quality when conditions are stable. This results in predictable productivity gains and lower effective tooling costs per component, particularly for finishing passes where surface integrity matters. Predictable fit and easy interchangeability in ISO systems As an ISO-standard indexable insert, compatibility depends on holder geometry, relief angle, tolerance class, clamping and the insert's size and thickness. The 0° relief specification and standardised form make it straightforward to match with ISO external holders or boring bars; checking these parameters before assembly avoids misfits and reduces machine downtime. The standardisation therefore supports smooth workflow integration and reliable repeatability in serial production. Controlled chips and fine surface quality for turning steel The insert is suitable for both external and internal turning when paired with an appropriate chipbreaker and cutting parameters. The double-sided chipbreaker enhances chip control in both orientations and permits economical use of multiple cutting edges by reversing the insert. The 0.4 mm corner radius balances edge strength with the ability to achieve a fine surface finish, making this grade appropriate for light finishing and semi-finishing passes on steel components. System assembly, handling and practical advantages A complete cutting system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for secure mounting. The cylindrical hole provides reliable centring and clamping stability, which is essential for consistent cuts and long insert life. Produced by Tungaloy, the insert benefits from material and chipformer optimisation that supports stable machining and predictable results in production environments. For machining projects that prioritise surface quality and consistent tool life, contact Metav Werkzeuge to request the TNMG160404 GT9530 from Tungaloy or to discuss compatible holders and cutting parameters: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998103 Manufacturer SKU: TUN6998103 Seller SKU: 6998103-Tungaloy Product name: TNMG160404 GT9530 Tungaloy insert Model series: ISO turning indexable inserts Core specifications Insert size: 16 mm Cutting angle: 60° Corner radius: 0.4 mm Relief angle: 0° Number of sides: 3 Features Grade: GT9530 (coated cermet) Material: carbide Chipbreaker: double-sided Hole style: cylindrical hole Insert form: triangular Application: turning (external and internal) ISO-standard compatibility FAQ What machining tasks is this insert suited for? The TNMG160404 GT9530 is intended for finishing and light universal turning of steel, delivering good surface quality and extended tool life under stable cutting conditions. Which materials can be machined with this grade? GT9530 is optimised for machining steel; the coated cermet composition offers wear resistance and a fine surface finish when used on steel workpieces. How can the insert be mounted securely? Mounting requires an ISO-compatible holder or boring bar matched to the insert form, relief angle, tolerance class and size; the TNMG160404 uses a cylindrical hole for reliable centring and clamping. Can the insert be reversed to use additional edges? Yes, the double-sided chipbreaker enables reversing the insert to exploit multiple cutting edges, which improves economy in applications with consistent cutting conditions. What are the article and SKU references for ordering? Article number 6998103, seller SKU 6998103-Tungaloy and manufacturer SKU TUN6998103 identify the TNMG160404 GT9530 insert for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO compatibility, a coated cermet grade for extended life, and a fine corner radius for superior surface finish; order the insert directly via Metav Werkzeuge or consult our technical advisors for application matching and availability. TNMG 160404 GT9530 – TNMG indexable turning insert for turning (Tungaloy) TNMG160404 GT9530 is an ISO‑standard indexable turning insert intended for finishing to light universal turning, offering a coated cermet grade that supports improved surface quality and extended cutting performance. ISO‑standard TNMG shape for compatibility Coated cermet GT9530 for longer tool life 0.4 mm corner radius for fine surface finish Double‑sided chipbreaker and cylindrical hole for secure fixing Reliable finishing and consistent surface quality with coated cermet The insert delivers stable finishing performance due to its coated cermet composition and the GT9530 grade, which is tuned for wear resistance under steady cutting conditions. The combination of a fine corner radius 0.4 mm and a high‑quality coating produces a superior surface finish on Stahl, reducing rework and finishing steps. By selecting the appropriate chipbreaker and matching holder form and tolerance class, machinists benefit from repeatable dimensional accuracy and less manual polishing. Compatibility and ease of integration for production workflows Designed to the ISO plate series, the TNMG format provides broad holder compatibility when the form, relief angle, tolerance class, fastening method, size and thickness are matched. The ISO‑standard geometry simplifies inventory management across turners and lathes and supports rapid changeover. The through‑hole with a cylindrical bore and the double‑sided layout ensure economical use of each insert and straightforward clamping in approved external holders or boring bars. Productivity gains from stable chip control and tool life The GT9530 grade includes a chip control geometry optimised for finishing and light‑general turning, promoting consistent chip formation under stable setups. This leads to fewer tool changes and a predictable production rhythm, which in turn improves mean time between interventions and overall machine uptime. The coated cermet substrate supports cutting at moderate speeds with reduced flank wear, providing an attractive balance between tool life and surface integrity for batch production. Practical selection advice for turning operations When specifying the insert, match the TNMG geometry and the GT9530 grade to the application: choose the chipbreaker suited to feed and depth of cut, verify holder compatibility by checking the plate thickness (4.76 mm) and size (16 mm), and prefer stable clamping conditions to realise the grade’s potential. For operations on materials such as Stahl, the insert is optimised for fine finishing where consistent surface quality and extended life under steady conditions are priorities. For robust finishing and extended insert life, request the Tungaloy TNMG160404 GT9530 from Metav Werkzeuge or contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998097 Manufacturer SKU: TUN6998097 SKU: 6998097-Tungaloy Series: ISO‑Drehwendeschneidplatten Core technical data Shape: triangular (TNMG) ISO code: 160404 Size: 16 mm Thickness: 4.76 mm Relief angle: 0° Included hole: with hole (cylindrical) Special features Grade / coating: GT9530 Substrate / type: coated cermet Corner radius: 0.4 mm Chipbreaker: double‑sided Application: turning (external and internal) Manufacturer article name: TNMG160404 GT9530 Tungaloy‑Wendeplatte FAQ What cutting tasks suit this insert best? The TNMG160404 GT9530 insert is designed primarily for finishing to light universal turning operations, offering good surface quality on Stahl when used under stable cutting conditions. How does the GT9530 grade affect tool life? GT9530 is a wear‑resistant, coated cermet grade that extends tool life in finishing applications by providing improved flank wear resistance and consistent chip behaviour with the TNMG geometry. Is the insert compatible with standard TNMG holders? Yes, the TNMG160404 form follows ISO dimensions; compatibility depends on matching the holder form, relief angle, tolerance class, fastening and plate thickness (4.76 mm). Can the insert be used on materials other than Stahl? The grade is optimised for finishing Stahl; selection for other materials should consider material properties and possibly a different chipbreaker or grade for best results. What fixing method does the insert require? The insert has a cylindrical hole and is intended to be secured using the appropriate clamping system for ISO TNMG plates; ensure the holder accepts the specified hole style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (GT9530), a 0.4 mm corner radius and ISO compatibility for consistent finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult their team for application-specific advice. TNMG160404 GT9530 Tungaloy indexable insert for turning — coated cermet, 0.4 mm corner radius The TNMG160404 GT9530 is an ISO-standard triangular indexable insert designed for external and internal turning, offering wear-resistant finishing performance in stable machining conditions. ISO triangular insert TNMG160404 Coated cermet grade GT9530 0.4 mm corner radius for fine finishes Double-sided chipbreaker with cylindrical hole Consistent finishing thanks to coated cermet technology A coated cermet substrate provides a balance between wear resistance and surface quality that is particularly suited to finishing operations on steel. The GT9530 grade is developed for stable conditions where longer tool life and improved surface appearance are priorities. Cermet materials combine ceramic hardness with metallic toughness, reducing flank wear and enabling more consistent results across production lots. This makes the insert a rational choice when process stability and predictable regrind intervals are required. Predictable set-up and secure clamping for efficient changes Compatibility with the toolholder is governed by form, clearance angle, tolerance class, fixation, size and thickness, which simplifies selection and reduces set-up time. The insert features a 0° clearance angle specification and an ISO designation, which supports standardised holder interfaces and repeatable mounting. For production environments where rapid index changes and consistent clamping repeatability matter, this leads to fewer stoppages and less variation between operators. Optimised chip control for stable cutting and surface quality The double-sided chipbreaker works in concert with the triangular geometry and the cylindrical hole to maintain reliable chip evacuation and stable cutting forces during turning. The 0.4 mm corner radius helps achieve a fine surface finish without sacrificing edge strength for light finishing passes. Combined with the insert’s coated cermet composition, these features reduce the need for frequent tool changes and help to maintain target tolerances with minimal manual intervention. Productivity gains through longer tool life and consistent results In series production, longer tool life and repeatable performance translate directly into lower machining costs and higher uptime. The geometry and material choice of this indexable insert contribute to a reduced total cost of ownership by extending service intervals and improving first-pass quality. For shops seeking a pragmatic mix of finish quality and durable performance, the GT9530 grade offers a technically sound solution that supports reliable machining cycles. Contact Metav Werkzeuge for tailored advice on Tungaloy GT9530 inserts and to ensure the best holder and grade selection for specific turning tasks; Metav Werkzeuge can provide detailed application support and delivery information. Technical Data Article number: 6998101 Manufacturer SKU: TUN6998101 Model series: ISO-Drehwendeschneidplatten Material: carbide Core technical data ISO designation: TNMG160404 Insert size: 16 Corner radius: 0.4 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Special features Coated cermet grade GT9530 Double-sided chipbreaker Triangular insert with cylindrical hole ISO-standard indexable insert for external and internal turning Suited for finishing on steel under stable conditions FAQ What materials is this insert suitable for? The TNMG160404 GT9530 insert is optimised for machining steel, offering improved surface finish and extended life in stable turning operations. How does the GT9530 coating benefit production? The GT9530 coating enhances wear resistance and contributes to consistent finishing quality, helping to reduce tool changes and maintain dimensional stability. Is the insert compatible with standard TNMG holders? Compatibility depends on holder form, tolerance class, fixation, size and thickness; the ISO designation TNMG160404 ensures standard interfaces where holders match these dimensions. What cutting tasks are ideal for this insert? This triangular insert is best applied to light finishing and general turning where a fine surface and longer tool life are required under stable machining conditions. How does the double-sided chipbreaker affect chip control? The double-sided chipbreaker provides reliable chip formation and evacuation, supporting stable cutting forces and improved surface finish during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant GT9530 grade and precise 60° geometry to improve finishing quality and extend tool life; order the insert from Metav Werkzeuge or request application guidance from our consultants. TNMG 160404 GT9530 Tungaloy indexable insert for Turning, coated cermet, ISO 160404 TNMG160404 GT9530 Tungaloy-Wendeplatte is an ISO-format insert designed for external and internal turning where high-quality surface finish and extended life under stable conditions are required Coated cermet for superior wear resistance Optimised for finishing and light universal turning Triangular 16 mm size with 0.4 mm nose radius Cylindrical hole, double-sided chipbreaker Consistent finishing and prolonged tool life from GT9530 The GT9530 grade combines a coated cermet substrate with a coating engineered for wear resistance, delivering a clear benefit where consistent surface quality and longer intervals between changes are priorities. As a finishing to light universal grade, this solution reduces the frequency of regrinds and machine downtime by maintaining a stable cutting edge under steady feed and depth conditions. The result is predictable process behaviour and reduced intervention in serial production. Geometry engineered for repeatable accuracy and interoperability The insert follows the ISO 160404 designation with a triangular form and a 60° included angle, providing a rigid geometry well suited to turning operations that demand positional accuracy. The 0.4 mm nose radius and 0° clearance (facing geometry) support fine surface finishes and controllable cutting forces. Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness, so the insert integrates into standard indexable systems without compromise. Application-focused chip control and material suitability Equipped with a double-sided chipbreaker, the insert supports efficient chip control during finishing passes and light general turning. The grade is particularly intended for machining steel in stable setups where surface appearance and tool life are critical. The chipbreaker design aids swarf evacuation and consistent cutting conditions, which in turn help achieve repeatable part quality and reduce secondary operations. System benefits and practical handling in production As part of a system consisting of the ISO insert, a matched external holder or boring bar, underlay/locking set and spare screws, the component enables quick replacement and straightforward inventory management. The cylindrical hole with matching clamp geometry ensures secure fixing and repeatable seating. For production planning, the combination of a robust cutting material and standardised form supports predictable process capability and efficient tool-change routines. For precision finishing with Tungaloy's GT9530 grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998099 Manufacturer SKU: TUN6998099 SKU: 6998099-Tungaloy Model series: ISO indexable turning inserts Facts ISO designation: 160404 Insert size: 16 mm Thickness: 4.76 mm Included angle: 60° Nose radius: 0.4 mm Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Coated cermet grade GT9530 Triangular insert form Designed for external and internal turning Compatible with standard external holders and boring bars Intended for finishing and light universal turning of steel System components: insert, holder/boring bar, underlay/locking set, replacement screws FAQ What materials is this insert suitable for? The GT9530 grade insert is intended primarily for machining steel, offering a finishing-capable coated cermet that balances surface quality and tool life. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert promotes controlled chip formation and evacuation, supporting consistent cutting forces and improved surface finish during finishing passes. Is the insert compatible with standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fastening and size; the TNMG160404 follows ISO 160404 and fits standard holders designed for that designation. What is the advantage of the 0.4 mm nose radius? A 0.4 mm nose radius provides a compromise between edge strength and fine surface finish, helping to reduce cutting vibration while delivering precise surface quality. Which SKU should be ordered for this Tungaloy insert? Order using SKU 6998099-Tungaloy or manufacturer SKU TUN6998099 to ensure the correct TNMG160404 GT9530 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade that combines excellent surface finish with extended tool life in stable turning operations; the GT9530 grade is optimised for finishing to light general-purpose steel. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG160404 GT9530 TNMG turning insert — Tungaloy (coated cermet, 0.4 mm nose) TNMG160404 GT9530 is a triangular ISO-indexable turning insert designed for finishing and light universal turning of steel, delivering a fine surface and predictable wear performance. High wear resistance on finishing cuts Excellent surface quality for turned parts ISO compatibility with standard holders Double-sided chipbreaker for economical use Consistent surface quality for demanding turning tasks The GT9530 grade is a coated cermet developed for stable finishing operations on steel where a superior surface is required. The combination of a wear-resistant substrate and a purpose-designed coating reduces built-up edge and maintains cutting-edge geometry, which results in a more consistent finish part after part. For users seeking repeatable results in production runs, the insert’s geometry and the 0.4 mm nose radius support low-vibration cutting that helps preserve the integrity of the workpiece surface. The ISO designation ensures clear selection when replacing worn inserts or matching inserts to existing toolholders. Longer tool life and productive machining under stable conditions This insert’s composition and cutting geometry translate into extended tool life during finishing and light turning operations. The coated cermet substrate tolerates abrasive wear better than uncoated grades, so downtime for insert changes is reduced and mean time between interventions increases. The double-sided design doubles the available cutting edges before replacement, improving cost-efficiency on long runs. In practice, choosing this grade can lower tool-change frequency and support steady output, especially where processing parameters remain stable and machine rigidity is sufficient. Easy integration and reliable clamping for workshop use Compatibility to standard tooling is determined by the insert’s form, clearance angle, tolerance class, fixing method, size and thickness; this series conforms to ISO norms to ensure straightforward replacement and tool inventory management. The insert features a cylindrical hole for secure fastening in compatible holders and a 4.76 mm plate thickness that provides robust support under cutting forces. These characteristics simplify tool setup and reduce the risk of incorrect mating to holders, making the product suitable for production environments that value predictable, fast tool changes and minimal setup complexity. For tailored recommendations or to source TNMG160404 GT9530 from Tungaloy, contact Metav Werkzeuge — technical advice and ordering assistance are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930, and application checks can be arranged with our consultants Technical data Article number: 6707278 SKU: 6707278-Tungaloy Manufacturer SKU: TUN6707278 Model series: ISO turning indexable inserts Designation: TNMG160404 GT9530 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Rake / relief angle: 0° Sidedness: double-sided Special features Coated cermet grade GT9530 Triangular plate form Cylindrical hole for fastening Intended application: turning; finishing to light universal for steel Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert intended for? The TNMG160404 GT9530 insert is intended primarily for machining steel in finishing to light universal operations, where good surface quality and longer life under stable conditions are required. How does the GT9530 grade improve productivity? The GT9530 coated cermet reduces abrasive wear and stabilises edge life, so the TNMG160404 insert maintains cutting geometry longer and lowers the frequency of tool changes, improving overall productivity. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO indexable insert conventions; compatibility with a holder depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness. What are the key geometric specifications to check before ordering? Key specifications include the corner radius (0.4 mm), plate thickness (4.76 mm), size (16 mm), included angle (60°) and the presence of a cylindrical hole for fixing. Can this insert be used for roughing operations? This grade is optimised for finishing and light universal turning; for heavy roughing, a different geometry or a tougher substrate would be more suitable than GT9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of cemented carbide construction, a KS05F cutting grade and a compact 60° triangular geometry for reliable turning performance; order original inserts via Metav Werkzeuge or consult our technicians for application matching. TNMG160404 KS05F — Tungaloy indexable turning insert (60°, 0.4 mm radius) A TNMG160404 KS05F is an ISO-standard triangular indexable insert designed for external and internal turning; compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness ISO triangular 60° insert Carbide grade KS05F, wear-resistant 0.4 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole Consistent cutting performance for high-volume turning The combination of a cemented carbide substrate and the KS05F grade delivers a balance of wear resistance and edge stability that supports longer tool life and fewer changeovers. The 60° triangle geometry, paired with a 0.4 mm corner radius, provides a predictable cutting edge for a range of turning operations. For production environments this results in reduced downtime and steadier component tolerances, since the insert maintains cutting integrity under fluctuating cutting forces and moderate feed rates. Fast, reliable integration into ISO toolholder systems Designed as an ISO-compliant insert, this triangular component fits standard external holders and boring bars when matched for form, relief angle and thickness. The presence of a cylindrical hole and the specified tolerance class simplifies secure clamping and repeatable positioning. Using compatible holders and the correct clamping set reduces setup time and helps to maintain concentricity, which is critical for turning operations that demand consistent surface finish and dimensional accuracy. Geometry and chip control that lower machining costs The double-sided chipbreaker geometry provides effective chip control for typical turning tasks; the insert’s reversibility halves tooling expenditure per indexable edge compared with single-sided types. The modest corner radius supports both finishing and light roughing, offering a compromise between edge strength and fine surface quality. Choosing the appropriate chipbreaker and grade according to workpiece stability and machining parameters optimises process efficiency and extends the effective life of each insert. Practical application advice and safety considerations Selection of the correct insert grade and chipbreaker should follow an analysis of the workpiece material, machining rigidity and desired surface finish. The insert is intended for turning tasks and forms part of a system comprising an ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Handling and storage of carbide inserts require care to prevent edge damage; damaged inserts should be replaced to avoid compromised component quality or toolholder damage. Contact Metav Werkzeuge for bespoke application advice on Tungaloy KS05F turning inserts and to arrange original supply; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: 6934808 Manufacturer SKU: TUN6934808 SKU: 6934808-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TNMG160404 Main code: 160404 Cutting angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 0° Special features Material: cemented carbide Grade/coating: KS05F Plate form: triangular Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Typical application: turning System notes: ISO-standard indexable insert, compatibility depends on holder form and tolerance FAQ What materials is this insert intended for? The TNMG160404 KS05F insert is specified for general turning tasks; the KS05F grade complements the geometry to provide a balance of wear resistance and toughness suitable for a broad range of workpiece materials when the correct chipbreaker is chosen. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius increases edge strength compared with finer radii, improving robustness for light roughing while still permitting acceptable surface finish in finishing passes with appropriate feeds. Can the insert be indexed to use multiple cutting edges? Yes, the triangular shape and double-sided chipbreaker allow indexing to spare edges, effectively doubling the number of usable cutting corners and improving cost efficiency per edge. What must be checked to ensure holder compatibility? Compatibility requires matching the insert form, relief angle, tolerance class, attachment method, size (16 mm) and thickness (4.76 mm) to the selected external holder or boring bar, plus the correct shim or clamping set and screws. Is the insert supplied as original Tungaloy product? This item is listed under the Tungaloy designation and is offered as an original, brand-new insert from the manufacturer as supplied through authorised channels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 KS20 Wendeplatten - Tungaloy
High wear resistance, reliable edge stability and ISO compatibility deliver consistent turning performance; reduced insert changes improve uptime and productivity. Order the TNMG160404 KS20 insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TNMG160404 KS20 TNMG (160404) indexable turning insert – Turning – Tungaloy The TNMG160404 KS20 Tungaloy insert is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a 0.4 mm nose radius, 0° relief and a cylindrical hole for secure clamping. TNMG160404 KS20 indexable turning insert Triangular 16 mm plate, 4.76 mm thickness Double-sided chipbreaker, cylindrical hole 0.4 mm nose radius, 0° relief Durable cutting performance that reduces interruptions The combination of the KS20 carbide grade and the insert’s geometry produces a balance of wear resistance and toughness that supports longer tool life and fewer indexings. The substrate and grade selection from Tungaloy aim to maintain a stable cutting edge under varied cutting conditions; this means predictable tool change intervals and lower tooling costs per finished part. Where productive turning is required, the performance focus is on consistent material removal rates and reduced secondary operations, enabling smoother production flows and improved machine utilisation. Geometry and chip control for repeatable surface quality A triangular plate with a 60° included angle gives rigidity and versatility in turning tasks, while the 0.4 mm nose radius helps to achieve narrow chamfers and controlled surface finish. The double-sided chipbreaker design promotes reliable chip formation for a wide range of cutting depths and feeds; chips are guided away from the cutting zone, reducing rework and decreasing the risk of workpiece damage. The presence of a cylindrical hole and the standardised dimensions ensure secure clamping in compatible holders, which is essential for maintaining concentricity and repeatable tolerances in serial production. Straightforward system integration with ISO tooling Being part of an ISO-standard turning insert family simplifies tool selection and inventory management. Compatibility with external holders, boring bars, shims and clamping sets is determined by form, relief angle, tolerance class, attachment type, size and thickness, so the insert can be integrated into existing tool systems without complex requalification. The insert’s 4.76 mm thickness and 16 mm plate size match common holder specifications, reducing setup time and minimising the need for custom fixtures. Practical application guidance and recommended use Designed specifically for turning operations, this indexable plate is best deployed when machining tasks demand a compromise between edge life and impact resistance. Select the chipbreaker and cutting parameters according to the workpiece material and the machine’s rigidity to achieve ideal results; the grade is intended to complement the geometry by providing balanced edge stability and wear behaviour. For unfamiliar applications or where material specifics are critical, technical advice can clarify grade selection and cutting data to avoid trial-and-error and to protect component quality. For tailored application support or to secure availability of the Tungaloy KS20 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented assistance Technical Data Article number: 6808393 SKU: 6808393-Tungaloy Manufacturer SKU: TUN6808393 Model series: ISO-Drehwendeschneidplatten ISO designation: TNMG160404 Facts Nose radius: 0.4 mm Plate size: 16 mm Plate thickness: 4.76 mm Included angle: 60° Relief angle: 0° Hole style: cylindrical Special features Carbide substrate KS20 Tungaloy grade Double-sided chipbreaker Triangular plate form Indexable turning insert, with hole for secure clamp FAQ What is the primary application for this insert? The TNMG160404 KS20 Tungaloy indexable insert is intended for external and internal turning operations, offering a balance of wear resistance and edge stability for general turning tasks. How does the KS20 grade affect tool life? The KS20 carbide grade from Tungaloy is formulated to combine wear resistance with sufficient toughness, which helps to extend edge life and maintain machining consistency under variable conditions. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness; holders matching the ISO TNMG size and a cylindrical hole clamping system will accept this insert. Can this insert be used for fine finishing? Yes — the 0.4 mm nose radius and stable geometry support controlled surface finishes when combined with appropriate feeds and speeds. Is the insert reversible or single-use per edge? The triangular design with a double-sided chipbreaker provides multiple cutting edges; each edge can be indexed according to wear, allowing several uses before the insert must be replaced. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing‑grade cermet (NS520), precise 0.4 mm corner radius and ISO compatibility for consistent surface quality and predictable tool life; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404 NS520 Tungaloy — Indexable Turning Insert, Cermet, 0.4 R A TNMG160404 indexable turning insert designed for finishing to light machining of steel, offering high surface quality and dimensional stability ISO‑norm TNMG 160404 form NS520 cermet for fine surface finish 0.4 mm corner radius for precision Double‑sided with cylindrical centre hole Consistent finishing for improved part quality The NS520 grade is a cermet developed for finishing to light machining of steel, delivering a balance between hardness and toughness that promotes a stable cutting edge and even wear. Thanks to the combination of the grade and a cemented carbide substrate, the insert sustains a controlled wear pattern which supports repeatable dimensional accuracy and a superior surface finish on turned parts. This behaviour reduces rework and supports predictable cycle times in serial production. Fast set‑up and reliable compatibility in ISO systems The insert follows the ISO TNMG geometry, easing interchange in standard holders; compatibility is determined by form, 0° relief angle, tolerance class, fastening, size and thickness. The triangular 60° cutting angle provides a familiar cutting geometry for general turning operations while the double‑sided design doubles the available cutting edges before replacement. The cylindrical hole allows stable clamping and simple indexation, so changeovers are straightforward and tool inventory remains lean. Productivity through predictable tool life and chip control With a 0.4 mm corner radius and a chipbreaker designed for light finishing, the grade supports reliable chip control and consistent cutting forces, which helps maintain spindle and workpiece stability. The insert’s specification is oriented to steady wear progression rather than aggressive metal removal, making it particularly suitable when surface quality and tolerance are priorities in the machining process. The result is improved uptime and lower overall cost per part in applications where finishing performance matters. For application advice on the Tungaloy TNMG160404 NS520 indexable insert or to discuss suitable holders and machining parameters, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6808338 Manufacturer SKU: TUN6808338 Model series: ISO-Drehwendeschneidplatten Grade: NS520 Manufacturer: Tungaloy Core measurements Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Cutting angle: 60° Relief angle: 0° Features and versions Triangular plate geometry Cylindrical centre hole Double‑sided chipbreaker Schneidstofftyp: cermet / coated cermet Application: turning FAQ What materials is this insert suited for? The TNMG160404 NS520 insert is optimised for steel finishing and light machining; the NS520 cermet grade focuses on surface quality and uniform wear when machining steel. Is the insert compatible with standard ISO TNMG holders? Compatibility is determined by geometry, relief angle, tolerance class, fastening, size and thickness; the TNMG160404 follows the ISO form and fits holders designed for TNMG 160404 inserts. How does the double‑sided design affect service life? A double‑sided configuration provides two usable edges per side, extending the number of indexings and improving overall life before replacement of the insert. What advantages does the NS520 grade deliver in finishing operations? NS520 offers a fine balance of hardness and toughness for finishing, promoting a consistent cutting edge, improved surface finish and predictable dimensional control in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS520 Wendeplatten - Tungaloy
High-precision finishing and repeatable tool life result from the combination of the NS520 cermet grade and the TNMG160404 triangular form with a 0.4 mm corner radius; this provides excellent surface quality and predictable wear for finishing to light turning of steel. Order directly via Metav Werkzeuge or consult our specialists for configuration advice. TNMG 160404 NS520 — TNMG160404 NS520 Tungaloy indexable turning insert for Turning TNMG160404 NS520 Tungaloy insert is a triangular, ISO-format indexable insert engineered for finishing and light turning on steel components Cermet grade NS520 for superior finishes 0.4 mm corner radius for precise profiles ISO TNMG160404 triangular form, 60° included angle Cylindrical hole and screw clamping compatibility Achieve consistent surface finish with a cermet grade optimised for finishing The TNMG160404 NS520 is designed as a cermet finishing solution that focuses on delivering a high-quality surface and even wear behaviour during light turning. The NS520 grade combines the hardness of cermet with a controlled coating behaviour to maintain edge integrity, which translates into fewer tool changes and more predictable part quality. The 0.4 mm corner radius supports accurate profile generation while limiting cutting forces, so components emerge with improved dimensional accuracy and reduced need for secondary finishing. Secure clamping and ISO compatibility for reliable production cycles This triangular ISO insert features a 60° included angle, a cylindrical hole and compatibility with standard screw-clamp holders, ensuring secure seating and repeatable positioning in the toolholder. The plate thickness of 4.76 mm and size 16 mm give structural stability for finishing passes, while the 0° clearance angle supports controlled cutting geometry in a wide range of turning set-ups. Because holder compatibility depends on form, clearance, tolerance class, fastening and size, using an ISO TNMG insert simplifies selection and replacement within established holder families. Operational efficiency through the right chip control and material pairing The double-sided chipbreaker design offers flexible edge indexing and economical use of each insert face, contributing to lower cost per part. For finishing and light machining of steel, select the NS520 cermet and a chipbreaker tuned to the workpiece rigidity and feed conditions; this reduces built-up edge and achieves uniform wear across cuts. The insert’s composition—cermet (coated or uncoated)—is optimised for surface quality and dimensional stability rather than heavy-duty roughing, making it a cost-effective choice where surface finish and repeatability are decisive. For tailored tooling recommendations and prompt supply of TNMG160404 NS520 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and fast delivery Technical data Article number: 6808408 Manufacturer SKU: TUN6808408 SKU: 6808408-Tungaloy Model series: ISO turning inserts Numbers / Core technical data Corner radius: 0.4 mm Included angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Clearance angle: 0° Manufacturer article number: 6808408 Designs / Special features Grade: NS520 (cermet) Cutting material type: Cermet / coated cermet Chipbreaker: double-sided Hole: with cylindrical hole Plate form: triangular Typical application: Turning (external and internal) System components: ISO insert, compatible holder, clamp set, replacement screws FAQ What applications is this insert best suited to? The TNMG160404 NS520 insert is intended for finishing to light turning of steel, providing fine surface quality and stable wear for external and internal turning tasks. How is the insert clamped in the holder? This triangular insert uses a cylindrical hole and screw clamping; the TNMG160404 NS520 is compatible with standard ISO clamping systems when the holder matches form, clearance and tolerance class. Can the NS520 grade be used for roughing? The NS520 cermet grade is optimised for finishing and light machining; for heavy roughing operations a different, more wear-resistant grade would be more suitable. How many cutting edges are available per insert face? The double-sided chipbreaker design allows multiple indices per insert, increasing usable edge count and lowering the cost per edge for the TNMG160404 NS520. What materials can be machined with this insert? The TNMG160404 NS520 is specified for use on steel in finishing and light turning applications; select chipbreaker and feeds according to part rigidity and surface requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of cermet grade NS520 for superior surface finish, a 60° triangular geometry for stable cutting, and a 0.4 mm corner radius that supports consistent dimensional control in finishing to light turning. Order the insert directly via Metav Werkzeuge or request advice from our technical consultants. TNMG160404 NS520 Tungaloy turning insert — ISO triangular insert, finishing/light turning The TNMG160404 NS520 Tungaloy insert is an ISO‑format triangular indexable insert designed for finishing to light turning of steel, offering stable cut behaviour and consistent surface quality in production environments ISO‑standard triangular insert Cermet grade NS520 for finishing 0.4 mm corner radius for accuracy Double‑sided chipbreaker design Consistent surface quality and wear behaviour for finishing The TNMG‑type triangular insert delivers reliable surface finish and repeatable size control thanks to the cermet grade NS520. The composition and coating of this grade favour low, even wear and reduced built‑up edge in finishing operations, which leads to fewer unplanned tool changes and steadier part quality. For operations where dimensional stability and a fine finish are priorities, the combination of a small 0.4 mm corner radius and refined edge preparation supports predictable results across series production. Secure clamping and geometry that supports process reliability Compatibility with the chosen clamping system is governed by form, clearance angle, tolerance class, fastening and plate dimensions; the insert features a cylindrical hole for positive, repeatable seating. The 60° geometry of the triangular shape gives three usable cutting edges per index and contributes to productivity in medium‑to‑light turning. The double‑sided chipbreaker enhances chip control during finishing passes, reducing interruptions and helping to maintain a stable cutting process even when feed rates vary slightly. Application scope and handling guidance for efficient machining Intended primarily for finishing to light turning of steel, this insert performs best with moderate cutting parameters that emphasise surface integrity and tool life. The NS520 grade supports fine tolerance work and uniform flank wear; operators are advised to select a holder and clamping set that match the plate thickness and size to exploit the insert’s performance. Where cycle stability and consistent part appearance matter, pairing the insert with a rigid holder and optimised coolant strategy will help achieve predictable, high‑quality production runs. Contact Metav Werkzeuge for ordering or technical advice on the Tungaloy TNMG160404 NS520 cermet insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808396 Manufacturer SKU: TUN6808396 SKU: 6808396‑Tungaloy ISO designation: TNMG160404 Grade: NS520 Cutting material type: coated cermet Intended application: Turning Facts Geometry angle: 60° Corner radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Manufacturer article number: 6808396 Special features ISO‑standard triangular indexable insert Double‑sided chipbreaker Cylindrical hole for secure clamping Coated cermet grade optimised for finishing and light machining of steel Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNMG160404 NS520 Tungaloy insert is formulated as a cermet grade primarily for finishing to light turning of steel, offering improved surface finish and uniform wear. How many cutting edges are available per insert? Thanks to the triangular 60° geometry, the insert provides three usable cutting edges; the double‑sided design supports economical indexing. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius, which balances edge strength with the ability to produce fine surface finishes and maintain dimensional accuracy during finishing passes. Does the insert require a specific clamping style? The insert uses a cylindrical hole and must be paired with a suitable holder and clamping set; compatibility depends on form, clearance, tolerance class, fastening, size and thickness as per ISO standards. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cutting edge, low cutting forces and ISO compatibility for efficient finishing cycles. The TNMG160404 NS9530 Tungaloy turning insert delivers consistent surface quality and predictable tool life; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG160404 NS9530 Tungaloy turning insert — uncoated cermet finishing insert, 0.4 mm corner radius A TNMG160404 NS9530 Tungaloy turning insert intended for finishing operations on steel with an ISO-standard triangular form and a 60° lead angle. Sharp cermet grade NS9530 for fine finishing ISO-standard TNMG format for broad compatibility 0.4 mm corner radius for precise edge definition Double-sided chipbreaker and cylindrical hole Superior surface finish for finishing operations The insert is manufactured as an uncoated cermet NS9530, optimised for low cutting forces and a sharp cutting edge that supports continuous finishing cuts. This composition reduces built-up edge and promotes a consistently fine surface, which is particularly beneficial when final-part tolerances and surface integrity are priorities. The result is fewer rework operations and a smoother handover to downstream processes, with the insert's geometry designed to favour stable chip flow during light depths of cut. Process reliability through geometry and chip control A triangular ISO insert with a 60° included angle and a double-sided chipbreaker provides versatility and predictable behaviour on common turning centres. The built-in chipformer and the cylindrical hole contribute to secure clamping and repeatable seat position, so the insert maintains its cutting line over multiple indexing events. These features increase process reliability, minimise vibration during light finishing passes and help achieve consistent dimensional results across batch production. Precision edge definition for tight tolerances The 0.4 mm corner radius delivers a controlled cutting edge that balances strength and sharpness, enabling fine profile definition and reduced nose wear when employed in finishing cuts. The combination of a narrow radius and the cermet grade supports low cutting forces, which in turn lowers machine deflection and protects fragile bores or thin-walled components. This geometry is advantageous for customers who require repeatable part quality with minimal manual adjustment. Compatibility and system integration for efficient machining Designed to the ISO turning insert standards, the insert’s compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; selecting an appropriate external holder or boring bar ensures optimal contact and stability. The ISO-standard format simplifies procurement and tool change procedures across workstations, while the insert’s finishing focus means fewer passes and reduced cycle times for many steel turning tasks. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998203 SKU: 6998203-Tungaloy Manufacturer SKU: TUN6998203 Facts Insert designation: TNMG160404 ISO code: 160404 Insert shape: triangular (60°) Corner radius: 0.4 mm Relief angle: 0° Plate size: 16 mm Special features Cutting material: uncoated cermet NS9530 Chipbreaker: double-sided Hole style: cylindrical hole Plate form: triangular With hole: yes Model series: ISO turning insert series Typical application: turning (finishing) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNMG160404 NS9530 Tungaloy turning insert is optimised for finishing steel components; the uncoated cermet grade is selected for low cutting forces and excellent surface quality during continuous finishing cuts. Which geometry does the insert use and how does that affect parts? The insert features a 60° triangular form and a 0.4 mm corner radius; this geometry enables precise edge definition and low cutting forces, helping to maintain tight tolerances during finishing operations. Is the insert indexable and how is it clamped? Yes, the insert is double-sided and indexable; the cylindrical hole and standard TNMG form ensure secure clamping in compatible holders and predictable seating for repeatable indexing. Does the insert have a coating? No, the insert is supplied as an uncoated cermet (NS9530), which provides a sharp edge and is tailored for finishing applications on steel. What identifiers should be used when ordering or checking compatibility? Use the article number 6998203 or the SKU 6998203-Tungaloy (manufacturer SKU TUN6998203) when ordering or verifying holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade (NS9530) and the ISO TNMG geometry for consistently high surface quality and low cutting forces; compatible with standard ISO holders and designed for continuous turning operations. Order or request application advice via Metav Werkzeuge for quick, practice-oriented support. TNMG 160404 NS9530 — Turning insert (Tungaloy) TNMG 160404 NS9530 is an ISO‑standard turning insert designed for fine finishing in conventional turning applications, delivering low cutting forces and excellent surface quality with a sharp cermet cutting edge. Cermet grade NS9530 for fine finishing ISO TNMG 160404 geometry for holder compatibility Sharp cutting edge with low cutting forces Double‑sided chipbreaker, triangular insert High-quality finishing with a cermet cutting edge The insert features a cermet substrate in the NS9530 grade, an uncoated finishing material formulated to deliver a high surface finish while keeping cutting forces low. This makes the insert particularly suitable for continuous cuts and operations with small depths of cut where dimensional accuracy and surface integrity matter. The material choice reduces plastic deformation at the edge and supports reliable, repeatable finishing results on steel workpieces; in practice this translates to fewer passes and reduced downstream rework. The combination of a sharp edge geometry and cermet metallurgy is aimed at producing a consistent microroughness level across serial production runs. Stable geometry for straightforward holder compatibility Built to the ISO standard for TNMG inserts, the ISO TNMG form ensures predictable orientation and seating in compatible holders. The insert is triangular with a 0.4 mm corner radius and a 60° included angle, and it comes with a cylindrical hole for secure clamping. The 0° rake angle contributes to the low cutting forces characteristic of this finishing grade. Compatibility with a specific toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness; typical system components include the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Using standardised inserts simplifies tool change‑overs and inventory management while maintaining process stability. Application benefits and operational economy As a finishing insert, the grade excels in producing fine surfaces on steel under continuous cutting conditions and small feeds, with the double‑sided chipbreaker aiding consistent chip control during steady machining. The carbide‑based cermet substrate offers edge stability that supports repeatable part quality and extended intervals between regrinds or replacements, contributing to lower unit costs in high‑volume turning. For shops seeking predictable finishing performance, the geometry and chip control features promote shorter setup times and fewer adjustments. For technical questions or bespoke machining recommendations, Metav Werkzeuge can provide application guidance and cutting parameter suggestions to match the workpiece material and machine dynamics. For precise finishing with Tungaloy NS9530 inserts, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944855 Manufacturer SKU: TUN6944855 SKU: 6944855-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Geometry / designation: TNMG160404 (ISO 160404) Corner radius: 0.4 mm Included angle: 60° Rake angle: 0° Plate size: 16 mm Features / Applications Material: carbide (cermet) — uncoated NS9530 grade Intended use: finishing for steel in turning Chipbreaker: double‑sided Shape: triangular insert with cylindrical hole System: ISO insert + suitable outer holder or boring bar Compatibility depends on holder form, clearance angle, tolerance class, fixing, size and thickness FAQ Which holder types are compatible with this insert? Compatibility is determined by the ISO TNMG form, the holder's clearance angle and tolerance class; the TNMG160404 NS9530 insert fits standard TNMG holders when size, thickness and fastening match the holder specification. Is this insert suitable for roughing operations? The NS9530 grade is a finishing cermet designed for low cutting forces and high surface quality; it is optimised for continuous finishing cuts rather than heavy roughing. Can the insert be used on stainless or alloyed materials? The insert is specified for finishing of steel; for other alloys or stainless applications, evaluate material compatibility and cutting parameters—Metav Werkzeuge can advise on suitable grades and conditions. How does the double‑sided chipbreaker help during turning? The double‑sided chipbreaker supports repeatable chip formation in continuous cuts, improving chip evacuation and stabilising the cutting process to maintain surface quality with the NS9530 finishing grade. What are the key features of the TNMG160404 NS9530 that improve process reliability? The combination of ISO TNMG geometry, a 0.4 mm corner radius, a 0° rake angle and the NS9530 cermet substrate yields low cutting forces, a sharp cutting edge and consistent chip control, all contributing to dependable finishing performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of sharp cutting geometry, low cutting forces and ISO compatibility for reliable finishing of steel components; order the insert directly via Metav Werkzeuge or consult our experts for application support. TNMG 160404 NS9530 turning insert — Tungaloy, uncoated cermet, 0° clearance TNMG 160404 NS9530 is an ISO‑standard triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge and a double‑sided chipbreaker. Sharp cermet finishing grade NS9530 ISO‑compatible triangular format 0° clearance angle for fine finishing Consistent, high‑quality finishing for steel components The NS9530 uncoated cermet grade is formulated for finishing steel, delivering a high surface finish with consistently low cutting forces. As a finishing grade, it excels in continuous cutting and small depths of cut, where a sharp edge and stable material removal are essential. The triangular format with a 60° included angle and a 0° clearance improves contact conditions at the tool tip, reducing vibration and helping to maintain repeatable dimensions on turned parts. Simple integration with standard ISO holders and secure clamping Designed to the ISO geometry TNMG 160404, the insert fits common external holders and boring bars that match form, clearance angle and thickness. The insert is double‑sided and features a cylindrical locating hole for secure seating and repeatable positioning. This standardisation reduces setup time, supports fast tool changes and enables predictable tool life in serial production. The 4.76 mm plate thickness and 16 mm inscribed circle ensure compatibility with a wide range of clamping systems. Stable cutting behaviour and productivity gains With a 0.4 mm corner radius and a sharp cutting edge, this grade keeps cutting forces low, which benefits finishing quality and extends holder life. The uncoated cermet substrate optimises wear resistance for fine cuts while minimising built‑up edge on common steels. For manufacturers focused on surface integrity and dimensional stability, the combination of material, geometry and chip control provided by the insert supports efficient, productive turning operations with fewer reworks. Clear technical advantages for process planning The TNMG‑style triangular insert is double‑edged, permitting economical index changes and predictable tool usage. The 60° insert angle and standardised ISO dimensions simplify CAM programming and make it easier to reproduce cutting parameters across machines. In addition, the uncoated cermet composition reduces friction at the cutting zone in finishing passes, which can contribute to longer intervals between inspections and steady surface roughness values. Request application guidance from Metav Werkzeuge on the Tungaloy TNMG160404 NS9530 finishing insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998265-Tungaloy Manufacturer SKU: TUN6998265 Model series: ISO‑Drehwendeschneidplatten Material: carbide (substrate: uncoated cermet NS9530) Application: turning Brand: Tungaloy Facts ISO designation: TNMG160404 Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole Chipbreaker: double‑sided Special features Finishing grade for steel Sharp cutting edge for low cutting forces Double‑edged for economical indexing ISO compatibility for standard holders Suitable for continuous cuts and small depths of cut FAQ What materials is this insert intended for? The TNMG160404 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous cutting and small depths of cut. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet provides a sharp cutting edge and reduced cutting forces, which together promote a high surface finish on turned steel components. Is the insert compatible with standard ISO TNMG holders? Yes. The TNMG160404 conforms to ISO geometry and is designed for compatibility with holders that match form, thickness and clearance angle. Does the insert require a special clamping system? The insert uses a cylindrical locating hole and standard clamping schemes; no special clamping system is required beyond a matching ISO holder and correct torque for secure seating. What are the advantages of a double‑sided chipbreaker? A double‑sided chipbreaker offers economical re‑indexing and predictable performance across multiple edges, helping to reduce tooling costs per component. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
The TNMG160404 NS9530 delivers precise finishing performance through a sharp, uncoated cermet edge and a small 0.4 mm corner radius, ensuring superior surface quality and consistent results. Order the Tungaloy turning insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. TNMG160404 NS9530 Tungaloy turning insert — uncoated cermet, 0.4 mm corner radius The TNMG160404 NS9530 is an ISO-indexed triangular turning insert designed for finishing operations on steel, combining a sharp cutting edge with a double-sided chipbreaker for stable chip formation. ISO‑standard triangular insert Uncoated cermet for fine finishes 0.4 mm corner radius for precision Double-sided chipbreaker for stable chips Achieve superior surface finish with low cutting forces The uncoated cermet grade NS9530 is engineered for finishing applications on steel, offering a sharp cutting edge that reduces cutting forces and produces consistently smooth surfaces. Because the material combines ceramic and metallic phases, it maintains edge integrity at the low to moderate cutting speeds typical of fine turning, making the insert particularly effective during continuous cuts and small depths of cut. The smaller 0.4 mm corner radius balances strength and edge precision, helping to minimise vibration and deliver repeatable surface roughness values with fewer passes. Secure fitting and ISO compatibility for predictable setup Compatibility with toolholders is governed by ISO parameters such as form, relief angle, tolerance class, fastening method, size and thickness. The triangular ISO designation and 0° relief angle allow straightforward pairing with standard external holders and boring bars; the insert is supplied with a cylindrical hole for reliable clamping. System setup typically comprises the ISO insert, a matching external holder or boring bar, a support pad/clamp set and replacement screws. Specification-based matching reduces setup time and ensures repeatable clamping force, which supports consistent cutting performance across batches. Stable chip control and process reliability The insert’s double-sided chipbreaker promotes predictable chip formation during finishing cuts, improving evacuation and reducing the risk of built-up edge. For turning operations where surface quality and dimensional accuracy matter, this combination of geometry and chip control provides process stability and helps extend the number of productive indexings per edge. The 60° included angle of the triangular form offers a balance between accessibility and cutting-edge strength, making it suitable for external and internal turning tasks that prioritise finish. How the grade helps in practical use and selection Selecting NS9530 means choosing a finishing-grade that performs best under continuous, low- to medium-feed conditions on steel. As a cermet, it provides improved wear resistance and thermal stability compared with conventional grades for similar cutting regimes. For users less familiar with the material class: cermet inserts are particularly effective when a fine surface finish is required and when cutting forces must be kept low. When integrating this insert into a tooling system, verify holder geometry and tolerance class to ensure the plate seats correctly; correct seating maximises the benefit of the sharp edge and chipbreaker geometry. For precision finishing with Tungaloy quality, contact Metav Werkzeuge for availability and holder compatibility: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997703-Tungaloy Manufacturer article number: 6997703 Manufacturer SKU: TUN6997703 Model series: ISO turning indexable inserts ISO designation: TNMG160404 Brand: Tungaloy Core data Corner radius: 0.4 mm Insert size: 16 mm Relief angle: 0° Included angle: 60° Double-sided: yes Hole style: cylindrical hole Special features Uncoated cermet grade NS9530 Intended use: finishing steel, continuous cuts, small depths of cut Triangular insert form ISO compatibility (form, relief angle, tolerance, fastening, size, thickness) System components: compatible holder, clamp set, replacement screws FAQ What holders are compatible with this TNMG insert? Compatibility depends on ISO form, relief angle, tolerance class, fastening and size; the TNMG160404 NS9530 fits standard ISO TNMG holders with matching geometry. Is this insert suitable for roughing operations? The NS9530 grade is a finishing cermet optimised for low cutting forces and fine surface quality, so it is not designed for heavy roughing tasks. Which materials can be machined with this grade? This insert is intended primarily for steel finishing; it achieves best results on continuous cuts and small depths of cut in steel components. How does the double-sided chipbreaker help in turning? The double-sided chipbreaker on this triangular insert improves chip control during finishing, promoting stable evacuation and reducing the risk of built‑up edge. How many usable edges does the insert provide? Being double-sided and triangular, the insert offers multiple indexable cutting edges; effective life depends on cutting conditions and correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Combining a sharp uncoated cermet grade with ISO-format compatibility, the TNMG 160404 NS9530 insert provides low cutting forces and an improved surface finish for fine turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160404 NS9530 — ISO turning insert (uncoated cermet) by Tungaloy TNMG 160404 NS9530 is an ISO-format triangular turning insert designed for finishing operations in external and internal turning applications Uncoated cermet finishing grade (NS9530) ISO triangular insert, 16 mm size 60° cutting geometry with 0° clearance Double-sided chipbreaker, through-hole fixing High-precision finishing for steel turning The combination of an uncoated cermet cutting material and a finishing-oriented grade delivers distinctly lower cutting forces and a refined surface finish when machining steel. Cermet grades are formulated to maintain a sharp cutting edge, which reduces rubbing and heat generation during continuous cuts and light depths of cut. For applications requiring tight dimensional accuracy and excellent workpiece appearance, this insert is optimised to provide the repeatable results expected in precision turning. The result is higher process efficiency through reduced rework and less time spent on manual finishing. Secure fit and ISO compatibility for stable machining Built to ISO standards, the triangular geometry and standard mounting interface ensure broad compatibility with common external holders and boring bars. Critical dimensions such as the 16 mm plate size and 4.76 mm thickness, together with the through-hole (cylindrical) fixing, create a stable clamping situation that minimises vibration and improves cutting consistency. Compatibility with a given holder is determined by form, free/clearance angle, tolerance class, fastening and thickness; matching these parameters ensures the insert seats correctly and maintains the expected cutting geometry during production. Reliable process behaviour and application guidance This grade is tailored as a finishing solution for steel, suited to continuous cutting conditions and small feed or depth settings. The double-sided chipbreaker extends usable life and allows economical indexation, while the 60° cutting geometry supports versatile toolpath strategies for both external and internal turning. For best results, pair the insert with a rigid toolholder, moderate cutting parameters typical of finishing passes, and appropriate coolant or lubrication to control thermal load. Tungaloy engineering background contributes to consistent tool life and predictable performance in serial production. For technical selection, holder recommendations or to order the TNMG 160404 NS9530 insert from Tungaloy, contact Metav Werkzeuge for expert assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998280 Manufacturer SKU: TUN6998280 Model series: ISO-Drehwendeschneidplatten Name: TNMG160404 NS9530 Tungaloy insert Core data Radius / corner radius: 0.4 mm Cutting angle: 60° Clearance (free) angle: 0° Plate size: 16 mm Plate thickness: 4.76 mm Special features Uncoated cermet cutting material (NS9530) Double-sided chipbreaker Triangular plate form With cylindrical hole (through-hole) Intended application: turning (external and internal) Sharp finishing grade for steel FAQ Which materials is this insert suitable for? The TNMG 160404 NS9530 is specified as a finishing-grade cermet for steel; it performs best on continuous turning operations and small depths of cut where a fine surface finish is required. Can the insert be used for internal turning? Yes, the triangular geometry and stable clamping with a through-hole allow use in both external and internal turning operations when paired with a suitable boring bar or holder. How is compatibility with a toolholder determined? Compatibility depends on form, free/clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the TNMG 160404 NS9530 ensures correct seating and cutting geometry. Is the insert indexable and reversible? The insert features a double-sided chipbreaker and can be indexed to use both cutting edges, extending life and lowering unit costs per edge. What fixing method does the insert require? This insert uses a through-hole with cylindrical hole style and is secured via the appropriate clamping kit and screw as specified for ISO turning systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
TNMG 160404 NS9530 Drehwendeschneidplatte von Tungaloy Die TNMG 160404 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen und wurde als Schlichtsorte für niedrige Schnittkräfte und hohe Oberflächengüte entwickelt Schlichtsorte für Stahl mit exakter Kante Unbeschichtetes Cermet für feine Oberflächen Dreieckige Platte mit zylindrischem Loch Doppelter Spanbrecher für konstante Spanformung Eckenradius 0,4 mm für feine Konturen Hohe Prozesssicherheit und Oberflächenqualität durch Cermet Die Platte nutzt unbeschichtetes Cermet, das speziell für Schlichtoperationen entwickelt wurde. Das sorgt für eine scharfe Schneidkante und ermöglicht eine deutlich verbesserte Oberflächengüte bei kontinuierlichem Schnitt. Durch die Materialwahl entstehen geringe Schnittkräfte, was Vibrationen reduziert und damit die Maßhaltigkeit bei feineren Zustellungen erhöht. Anwender profitieren von gleichbleibender Bauteiloberfläche und weniger Nacharbeit. Kompatibilität, Form und mechanische Passung für den Halter Bei der Auswahl des passenden Halters entscheidet die Form, der Freiwinkel und die Toleranzklasse der Platte. Die TNMG 160404 ist dreieckig, hat ein zylindrisches Loch und einen Freiwinkel von 0°, wodurch sie in viele ISO-konforme Außenhalter und Bohrstangen passt. Durch die Normierung lässt sich die Platte schnell montieren und austauschen, was Rüstzeiten verkürzt und die Produktivität in Serienprozessen erhöht. Spezifische Vorteile in der Produktion und Werkstoffabdeckung Diese Sorte NS9530 ist als Schlichtsorte für Stahl ausgelegt und bietet stabile Spanbildung bei kleinen Zustellungen. Der doppelseitige Spanbrecher ermöglicht eine gleichmäßige Spanabfuhr und reduziert die Gefahr von Spanverwicklungen. Für Fertigungsprozesse mit Fokus auf Oberflächenqualität und reproduzierbare Maßhaltigkeit ist diese Platte eine wirtschaftliche Lösung, da sie Standzeit und Bearbeitungsstabilität verbindet. Praktische Hinweise zur Einsatzoptimierung Für bestmögliche Ergebnisse empfiehlt sich die Kombination aus passenden Schnittwerten und stabiler Aufspannung. Der Eckenradius von 0,4 mm eignet sich für feine Konturen und präzise Maßtoleranzen; bei gröberen Schrupparbeiten sind größere Radien sinnvoll. Werkzeugeinsatz, Schnittdaten und Kühlung sollten auf die Schlichtaufgabe abgestimmt werden, damit die scharfe Schneidkante der Platte ihre Vorteile vollständig ausspielen kann. Empfehlung: Für präzise Schlichtbearbeitung die TNMG 160404 NS9530 von Tungaloy über Metav Werkzeuge anfragen oder die technische Beratung per eMail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 nutzen. Produktmerkmale Artikelnummer: 6998215 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TNMG160404 Fakten Radius: 0,4 mm Plattengröße: 16 mm Winkel: 60° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 – Schlichtsorte für Stahl Plattenform: dreieckig Loch: mit Loch, zylindrisches Loch Spanbrecher: doppelseitig Einsatz: Drehen, Außen- und Innendrehen FAQ Für welche Bearbeitungen eignet sich die TNMG 160404 NS9530 am besten? Die TNMG 160404 NS9530 von Tungaloy ist primär für Schlichtaufgaben beim Drehen von Stahl konzipiert und liefert bei kontinuierlichem Schnitt besonders hohe Oberflächengüte. Welche Materialempfehlung gilt für diese Wendeplatte? Die Sorte NS9530 ist eine Schlichtsorte für Stahl; das unbeschichtete Cermet eignet sich besonders für feine Oberflächen und geringe Schnittkräfte. Wie wirkt sich der Eckenradius 0,4 mm auf das Ergebnis aus? Ein Eckenradius von 0,4 mm ermöglicht präzise Konturen und feine Maßhaltigkeit, ideal für Bauteile mit hohen Oberflächengüte-Anforderungen. Ist die Platte für Innen- und Außenbearbeitung kompatibel? Ja, die ISO-Norm und die Form der TNMG160404 gewährleisten Einsatzmöglichkeiten sowohl beim Außen- als auch beim Innendrehen, abhängig vom verwendeten Halter. Welche Rolle spielt der doppelseitige Spanbrecher? Der doppelseitige Spanbrecher sorgt für gleichmäßige Spanformung und reduziert Spanverwicklungen, was die Prozessstabilität erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com