TNMG 160404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet grade, a sharp cutting edge and low cutting forces to achieve consistently high surface quality in finishing operations. Order the insert directly via Metav Werkzeuge or consult the technical team for assistance with holder selection and cutting parameters. TNMG160404 NS9530 TNMG turning insert for finishing of steel — Tungaloy A TNMG160404 NS9530 insert designed to ISO standards for precision turning; optimised for fine finishing of steel components in continuous cuts. ISO TNMG triangular insert, 16 mm size Uncoated cermet grade NS9530 Sharp edge for superior surface finish Double-sided chipbreaker, cylindrical hole High-quality finishing with reduced cutting forces The uncoated cermet NS9530 delivers a sharp cutting edge and inherently low cutting forces, which translates into a measurable improvement in machined surface quality. As a finishing grade, this insert is engineered for continuous cuts and small depths of cut, so waviness and workpiece distortion are minimised. The result is fewer rework cycles and a predictable surface roughness—advantages that support tighter tolerances and more efficient downstream processing. Stable geometry for reliable indexable performance The triangular geometry with a 16 mm inscribed circle and a corner radius of 0.4 mm provides a stable seating and predictable engagement with the workpiece. The insert features a double-sided chipbreaker and a cylindrical hole for positive clamping; the 60° included angle ensures familiar toolpath geometry for standard TNMG holders. Because the compatibility with a holder depends on form, relief angle, tolerance class, clamping type, size and thickness, the ISO-standard dimensions simplify the selection process and reduce setup time while enabling quick index changes to restore cutting performance. Practical application notes and material match Designed primarily for external and internal turning, the grade excels in finishing operations on steel thanks to its combination of a finely honed edge and low cutting forces. Match the NS9530 grade and the double-sided chipbreaker to the workpiece stability and the intended feed to avoid edge chipping during interrupted cuts. For mixed production or variable stability, select an appropriate holder and clamping set to maintain repeatable results; Metav Werkzeuge can supply the correct seating pads and screws to complete the system. The engineering behind the insert supports consistent batch-to-batch performance and facilitates predictable tool changes. Contact Metav Werkzeuge for application-specific cutting data, holder compatibility advice and fast supply of Tungaloy inserts through Metav Werkzeuge. Technical Data Article number: 6998207-Tungaloy Manufacturer item number: 6998207 Manufacturer SKU: TUN6998207 Manufacturer: Tungaloy Facts Insert size (inscribed circle): 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Cylindrical hole for clamping ISO-standard triangular plate Suitable for external and internal turning Model series: ISO turning inserts FAQ Which materials is this insert intended for? The NS9530 grade is formulated for finishing on steel; the TNMG160404 NS9530 insert from Tungaloy is optimised to deliver high surface quality on continuous steel cuts. Is this insert suitable for both external and internal turning? Yes, the ISO TNMG shape and the insert geometry make it appropriate for both external and internal turning applications when paired with the correct holder. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker allows two indexings per insert edge arrangement, improving cost efficiency and ensuring consistent chip control with the NS9530 finishing grade. What should be checked to ensure holder compatibility? Verify the holder matches form, relief (0° in this case), tolerance class, clamping type, insert size and thickness to ensure correct seating of the TNMG160404 NS9530 insert. Can the insert be re-indexed to restore cutting performance? Yes, the triangular geometry and double-sided design permit re-indexing to present a fresh cutting edge and maintain productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Product data conflict detected: the dataset lists the cutting material as "Hartmetall" (cemented carbide) while the technical specification identifies an uncoated cermet (NS9530). Due to this inconsistency, a product description cannot be generated. Please verify and correct the material or grade information to ensure accuracy and consistency in the product details, as discrepancies in such critical data can lead to confusion, misrepresentation, or errors in application, which may ultimately affect customer satisfaction, operational efficiency, and the overall reliability of the product. It is essential to resolve this issue promptly by cross-referencing the dataset and technical specifications to confirm the correct material or grade.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility to streamline turning operations. Order the required inserts via Metav Werkzeuge or contact our consultants for application advice. TNMG160404 NS9530 – ISO indexable turning insert (finishing, 0.4 mm radius) by Tungaloy A TNMG160404 NS9530 indexable turning insert designed for finishing operations in steel, offering a sharp cutting edge and a double-sided chipbreaker for continuous cuts Cermet finishing grade NS9530 for steel Sharp cutting edge for low cutting forces 0.4 mm corner radius for fine finishing Double-sided chipbreaker for continuous cuts ISO triangular TNMG insert, 60° geometry High-quality finishing with reduced cutting forces The uncoated cermet NS9530 is formulated as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that result in consistently improved surface quality. This composition is particularly suitable for continuous cutting and small depths of cut, where chatter resistance and edge stability determine the final finish. The combination of edge geometry and chip control reduces secondary operations and helps maintain cycle-time predictability in production environments. Easy integration into ISO tooling systems Designed to the ISO TNMG specification, the insert features a triangular 60° geometry, a 0.4 mm corner radius and a standard thickness of 4.76 mm, which simplifies toolholder selection and stock management. Compatibility with appropriate holders is determined by form, relief angle, tolerance class, clamping and size; the cylindrical hole ensures secure seating for repeatable clamping. This standardisation supports quick changeover and reduces setup time, improving overall machining throughput. Application-focused performance and predictable results For external and internal turning where a fine surface finish is required, the indexable insert provides reliable cutting behaviour with controlled chip formation thanks to its double-sided chipbreaker. The finishing nature of the grade means smaller feeds and depths of cut give superior results on steel components, making it ideal for parts that demand tight surface specifications. If exact cutting parameters are required for a specific steel grade or machining setup, technical consultation ensures optimal speeds and feeds for consistent tool life and part quality. For application-specific recommendations or to order Tungaloy finishing inserts directly, contact Metav Werkzeuge for tailored advice and availability. Technical Data Article number: 6997699 SKU: 6997699-Tungaloy Manufacturer SKU: TUN6997699 Manufacturer article number: 6997699 Manufacturer: Tungaloy Numbers / Core technical data ISO designation: TNMG160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Relief angle: 0° Designs / Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Triangular insert (TNMG) With cylindrical hole For turning (finishing steel) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The TNMG160404 NS9530 is a finishing cermet grade intended primarily for use on steel, providing low cutting forces and high surface quality. Is the insert reversible or single-use? The TNMG triangular insert is double-sided with a chipbreaker, allowing indexation of multiple cutting edges to extend service life. Which geometry and radius does the insert have? The insert features a 60° triangular geometry with a 0.4 mm corner radius, designed for fine finishing cuts. How does the NS9530 grade affect machining strategy? NS9530’s sharp edge and finishing focus favour smaller depths of cut and stable, continuous feeds to achieve superior surface finishes with reduced secondary machining. Can the insert be used in standard TNMG toolholders? Yes, the TNMG160404 conforms to ISO sizing and will fit compatible TNMG toolholders provided form, relief angle, tolerance class, clamping and thickness match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade and the 0.4 mm nose radius for consistently high surface quality and low cutting forces; combine this with the ISO compatibility for straightforward tool changes and efficient shop-floor integration. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 160404 NS9530 — Tungaloy turning insert — uncoated cermet finishing grade, 0.4 mm nose radius TNMG160404 NS9530 Tungaloy-Wendeplatte is an ISO triangular insert designed for precision turning of steel components, offering a sharp cutting edge for superior surface finish Precision finishing grade NS9530 cermet insert Suitable for continuous turning of steel Triangular ISO insert, 16 mm size, 0.4 mm radius Double-sided chipbreaker, 0° relief angle Improve surface finish with a low-force finishing grade The NS9530 uncoated cermet grade is engineered for finishing operations where a sharp cutting edge and consistent results are required. The composition of the grade reduces built-up edge tendency and lowers friction at the cutting zone, which in turn produces a high surface finish and stabilises process forces. For shops focused on repeatable part quality and minimal secondary operations, this finishing insert is optimised to keep cycle times predictable without sacrificing component appearance. Simple integration into ISO tooling systems for reliable changeovers Compatibility is determined by insert form, relief angle, tolerance class, clamping and thickness, so the insert is intended to be used with a matching external holder or boring bar, plus the appropriate shim/clamping set and replacement screws. The triangular ISO TNMG160404 geometry with a 60° included angle and 0° relief suits many standard toolholders; the insert's cylindrical hole enables secure screw clamping. This system-oriented approach ensures quick index changes and reduces machine downtime while maintaining repeatable tool positioning. Material and process guidance for predictable performance The cermet finishing grade is particularly suited to steel in continuous-cutting scenarios and for small depths of cut where surface quality is critical. The 0.4 mm nose radius balances edge strength and finer detail on the workpiece, while the double-sided chipbreaker supports consistent chip form when stability allows. Selection of chipbreaker and grade should be matched to workpiece material, cutting parameters and machine rigidity; with correct setup, the insert delivers longer effective tool life and lower rework rates, supporting overall productivity gains. For finishing turning operations with the Tungaloy NS9530 TNMG160404 insert, contact Metav Werkzeuge for technical selection and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998201-Tungaloy Manufacturer SKU: TUN6998201 Label: TNMG160404 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / core technical data Nose radius: 0.4 mm Plate size: 16 mm Plate thickness: 4.76 mm Included angle: 60° Relief angle: 0° Designs / special features Triangular plate form Double-sided chipbreaker Uncoated cermet grade NS9530 With cylindrical hole for screw clamping Suitable for external and internal turning System components: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The TNMG160404 NS9530 insert is designed primarily for steel finishing; the NS9530 cermet grade provides low cutting forces and excellent surface quality for continuous turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the TNMG160404 fits standard ISO toolholders for 16 mm triangular inserts with screw clamping. How does the NS9530 grade affect cutting performance? The NS9530 uncoated cermet grade gives a sharp cutting edge and reduced friction, resulting in improved surface finish and stable cutting forces, especially at small depths of cut. Is the insert indexed and reversible? Yes, the triangular geometry with a double-sided chipbreaker provides multiple usable cutting edges, allowing indexable reversals to extend service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp, low-force cutting geometry and the stability of an ISO-standard insert for consistent finishing results; the combination of NS9530 cermet and a 0° clearance angle delivers superior surface quality and extended edge life. Order this turning insert directly via Metav Werkzeuge or consult our specialists for machining data and availability. TNMG 160404 NS9530 Turning insert (ISO) by Tungaloy — uncoated cermet, 0° clearance TNMG 160404 NS9530 is a triangular ISO turning insert designed for finishing operations in steel, offering a sharp cutting edge and a double-sided chipbreaker for improved chip control. Uncoated cermet grade NS9530 Sharp edge for fine finishing Triangular 16 mm inscribed circle 0° clearance angle, cylindrical hole Precision finishing for steel components The combination of an uncoated cermet cutting material and a finely honed geometry makes this insert particularly effective where surface quality matters. The chosen grade, NS9530, maintains a sharp cutting edge under continuous cutting conditions, which reduces cutting forces and helps achieve tighter surface tolerances. For finishing passes with small depths of cut, the lower cutting resistance contributes directly to reduced vibration and improved dimensional stability, translating into fewer rework steps and a more predictable process. Seamless integration with ISO turning systems This indexable plate conforms to ISO dimensions and is intended for installation in ISO-compatible external holders or boring bars; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s triangular shape with a cylindrical hole and standard thickness simplifies changeover and reduces inventory complexity. Using a correctly matched holder and clamping set ensures secure seating and repeatable positioning, which shortens setup time and supports consistent part-to-part accuracy on batch runs. Durable edge performance and efficient chip control For fine finishing of steel, the uncoated cermet offers excellent edge retention and dependable wear resistance, leading to stable machining over longer tool life in finishing applications. The double-sided chipbreaker provides reliable chip control in both orientations, helping to maintain a steady material flow and minimising the risk of surface damage. These characteristics support higher overall productivity by extending the usable life of each indexed position and reducing unscheduled tool changes. Practical guidance for best results Use the insert primarily for continuous turning operations with modest feed and depth of cut to exploit its strengths in surface quality. The 0° clearance in combination with the 60° included angle suits precision finishing profiles, while the 0.4 mm corner radius provides a balance between an unobtrusive tool mark and adequate edge strength for fine passes. When selecting the chipbreaker and grade, match the NS9530 to steel workpieces and choose cutting data that favour steady, continuous cuts rather than aggressive material removal to preserve surface integrity. Request availability, cutting-data sheets and batch-supply options from Metav Werkzeuge—contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TNMG 160404 NS9530 turning insert and optimal holder pairing Technical data Manufacturer article number: 6997704 SKU: 6997704-Tungaloy Manufacturer SKU: TUN6997704 ISO designation: TNMG160404 Grade: NS9530 Cutting material: uncoated cermet Base material: cemented carbide Numbers / Core technical data Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole ISO code: 160404 Special features / Design Triangular plate form Double-sided chipbreaker Designed for finishing steel ISO-turning insert series Compatibility depends on holder form, fastening and tolerance class Intended for external holders or boring bars FAQ What materials is this insert best suited for? The TNMG 160404 NS9530 Tungaloy turning insert (SKU 6997704-Tungaloy) is optimised for finishing operations in steel, where the uncoated cermet grade provides a sharp edge and low cutting forces for improved surface finish. How does the insert mount in a tool system? Mounting requires an ISO-compatible external holder or boring bar; compatibility for the TNMG 160404 NS9530 is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Is the chip control suitable for finishing applications? Yes — the double-sided chipbreaker on the TNMG 160404 NS9530 insert ensures consistent chip control in both orientations, aiding stable material flow and protecting surface quality during fine cuts. Can this insert be used for interrupted cutting? The NS9530 grade and geometry are optimised for continuous finishing cuts; while occasional interrupted cuts are possible, frequent interruptions may shorten edge life and affect surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of sharp cutting performance and consistent surface finish combined with simple holder compatibility for reliable finishing operations; order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. TNMG 160404 NS9530 Tungaloy turning insert — uncoated cermet for fine finishing, 60° triangle TNMG 160404 NS9530 is a triangular ISO turning insert designed for finishing cuts in steel, offering a sharp edge and stable performance in continuous cutting applications. Uncoated cermet grade NS9530 for fine finishing Suitable for continuous cuts and light feeds ISO triangular insert, 60° with 0.4 mm radius Cylindrical hole with double-sided chipbreaker Fine finishing with lower cutting forces and superior surface quality The uncoated cermet grade NS9530 provides a sharp cutting edge tailored for finishing operations in steel, reducing cutting forces and enabling improved surface integrity. As a finishing grade, it is optimised for continuous cutting and small depths of cut, so operators can expect consistent dimensional accuracy and a reduced need for downstream grinding. The material choice and edge geometry translate into measurable productivity gains on long, uninterrupted turning passes. Consistent fit and easy integration into ISO systems Compatibility is determined by shape, clearance angle, tolerance class, clamping method, size and thickness; the ISO designation ensures direct interchangeability with standard holders. The insert is supplied with a cylindrical hole and is intended to be used with a matching outer holder or boring bar, plus shim/clamp sets and replacement screws as required. This standardised system design simplifies toolroom logistics and shortens setup times, which supports faster machine turnover and predictable process planning. Geometry engineered for controlled chip formation and repeatability The TNMG form with a 60° included angle and a 0.4 mm nose radius offers a balance between edge strength and the fine finish needed for precision components. The double-sided chipbreaker provides repeatable chip control on finishing passes while preserving the sharp edge. Because the insert is double-sided, indexable use extends tool life per insert, improving cost efficiency without sacrificing surface result or process stability. Material and application guidance for reliable results Manufactured from carbide substrate with an uncoated cermet cutting layer, this insert is specified as a finishing grade for steel components where low cutting forces and an excellent surface are required. The design is less suited for heavy interrupted cuts or high-feed roughing; instead, it excels when small material removal and controlled tool engagement are priorities. For best results, select a holder and cutting parameters that match the insert’s geometry and intended finishing role. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy finishing inserts and assistance matching holders or cutting data — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6998211 Manufacturer SKU: TUN6998211 SKU: 6998211-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 Grade: NS9530 Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Included angle: 60° Hole: with hole (cylindrical) Special features Uncoated cermet cutting material NS9530 Triangular insert, double-sided chipbreaker Cylindrical hole for positive clamping Intended application: turning, finishing of steel System components: insert, holder/boring bar, shim/clamp and screws ISO-standardised geometry (TNMG form) FAQ What materials is this insert designed for? The TNMG 160404 NS9530 insert is specified as a finishing grade for steel and performs best on continuous turning operations where a high-quality surface finish is required. How does the NS9530 grade affect cutting performance? Grade NS9530 is an uncoated cermet offering a sharp edge and reduced cutting forces, which helps achieve improved surface quality and consistent dimensional control during finishing passes. Is the insert compatible with standard ISO holders? Yes, the ISO designation and the TNMG geometry ensure compatibility with holders and boring bars that match the form, clearance angle, tolerance class, clamping type, size and thickness. What benefit does the 0.4 mm nose radius provide? A 0.4 mm nose radius balances edge strength with the ability to produce fine surface finishes, making it suitable for small depths of cut and precision turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Benefit from the precision of an ISO‑standard triangular insert combined with the sharp NS9530 cermet grade and a 0.4 mm corner radius for superior finishing on steel; order the TNMG160404 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160404 NS9530 turning insert (ISO) by Tungaloy — uncoated cermet, 0.4 mm radius TNMG160404 NS9530 is a triangular, ISO‑format turning insert designed for finishing operations in steel turning and compatible with standard TNMG toolholders TNMG 160404 ISO triangular insert Uncoated cermet NS9530 for finishing 0.4 mm corner radius for fine surface finish Double-sided chipbreaker, centre hole Consistent finishing quality with a sharp cermet grade The NS9530 uncoated cermet is engineered for finishing cuts on steel, delivering a sharp cutting edge and low cutting forces that improve dimensional control. For continuous cutting and small depths of cut, the grade promotes a stable cutting action and reduced tendency for built‑up edge, which in turn enhances the achievable surface finish. The modest corner radius is selected to balance edge strength with the fine finish expected in final turning passes. ISO compatibility and secure clamping for predictable performance Built to the ISO TNMG160404 form, the insert’s triangular geometry and specified tolerances ensure predictable fitment in mating holders. The insert specifies a 60° included angle and a 0° clearance face, with a cylindrical centre hole for screw clamping. These attributes facilitate repeatable seating and secure clamping, so index changes maintain concentricity and cutting line position. Clear identification of form, free angle and thickness simplifies holder selection and reduces setup time. Productivity advantages through indexable design and chip control The double‑sided design offers two usable cutting edges per index, improving tool economy while the integrated, double‑sided chipbreaker supports effective chip control during finishing cuts. The uncoated cermet substrate is particularly effective where low cutting forces and high surface quality are priorities; it performs best with stable setups and modest feeds. Selection of the chipbreaker and the NS9530 grade should be matched to workpiece steel, machine rigidity and the intended feed to extract maximum tool life and consistent results. Contact Metav Werkzeuge today to specify the TNMG160404 NS9530 Tungaloy turning insert for finishing operations; for application advice or immediate processing information email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998199 Manufacturer SKU: TUN6998199 Model series: ISO turning inserts Facts Included angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Free clearance angle: 0° Manufacturer article number: 6998199 Special features Uncoated cermet grade NS9530 Triangular plate form (TNMG) Double-sided chipbreaker Cylindrical centre hole Designed for turning (finishing) of steel Compatible with ISO TNMG holders FAQ Is this insert suitable for finishing steel? Yes. The TNMG160404 NS9530 Tungaloy turning insert is a finishing grade specifically formulated for steel work, offering a sharp cutting edge and reduced cutting forces for improved surface quality. How many usable edges does the insert provide? The TNMG160404 is double‑sided, providing two indexable cutting edges per side; this offers multiple re‑indexes for economic use of the insert. What does the 0.4 mm corner radius mean for the finish? A 0.4 mm corner radius delivers a fine surface finish while retaining sufficient edge strength for typical finishing passes with small depths of cut. Is the insert supplied with a coating? This Tungaloy insert is an uncoated cermet in the NS9530 grade, optimised for finishing applications where a sharp edge and low cutting forces are required. Does the insert require a specific holder type? Compatibility is determined by the ISO TNMG form, holder geometry, clearance angle and clamping method; the triangular ISO form and cylindrical centre hole suit standard TNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet finishing grade together with the TNMG160404 triangular geometry and 0.4 mm nose radius to achieve lower cutting forces and superior surface finish in turning operations; order directly via Metav Werkzeuge or consult our technical advisors for application-specific setup. TNMG160404 NS9530 — ISO turning insert (finishing grade) by Tungaloy The TNMG160404 NS9530 is an ISO‑standard triangular turning insert optimised for finishing steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Uncoated cermet NS9530 finishing grade Sharp cutting edge for fine surface finish 0.4 mm nose radius for accurate profiles Triangular, double-sided with cylindrical hole Improved finishing through low cutting forces and sharp edge The combination of an uncoated cermet grade NS9530 and a purpose‑designed edge geometry reduces friction at the cutting zone, which results in low cutting forces and a consistently high surface finish. For finishing passes on steel, the material and edge integrity of this insert promote fewer built‑up edges and more predictable results during continuous machining. This rational advantage shortens rework time and supports stable cycle times in high‑mix and batch production. Geometry designed for repeatable accuracy and profile control The insert’s triangular geometry with a 0.4 mm nose radius and a 60° included angle provides precise profile reproduction while maintaining rigidity in the cutting zone. A 0° rake angle contributes to the sharp cutting action beneficial in light finishing cuts. The double‑sided design with a cylindrical hole ensures secure clamping in ISO holders; compatibility depends on holder form, clearance, tolerance class, fastening method, overall size and thickness, which together determine assembly stability and repeatability. Material composition and application benefits for steel finishing Manufactured as an uncoated cermet grade, this insert is tailored to finishing tasks on steel, delivering a balance between wear resistance and sharpness that supports excellent optical and tactile surface quality. The grade’s behaviour under continuous cuts and small depths makes it suitable where minimal cutting forces and reduced vibration are priorities. Explaining the term: cermet combines ceramic and metallic properties to maintain a fine cutting edge at moderate temperatures typical of finishing operations. Practical integration and recommended system setup System integration requires matching the insert to an appropriate external holder, underlay or clamping kit and replacement screws; the ISO designation ensures interchangeability when holder geometry and tolerance classes are observed. For best results, select a chipbreaker and insert grade aligned with workpiece stability and the intended feed and depth parameters. If there is any uncertainty about holder compatibility or process windows, our technical team can advise on selection and clamping strategy to safeguard component quality and tool life. For tailored advice on using the NS9530 finishing grade and to arrange supply via Metav Werkzeuge, contact our experts at info@metav-werkzeuge.com or call +49 2822 7131930 — support is available for application planning and order placement. Technical data Article number: 6998219-Tungaloy Manufacturer item number: 6998219 Manufacturer SKU: TUN6998219 Manufacturer: Tungaloy Core specifications Size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 60° Rake angle: 0° ISO designation: 160404 Features & applications Uncoated cermet grade NS9530 Triangular insert, double-sided Cylindrical centre hole for clamping Suitable for turning (finishing) on steel Recommended for continuous cuts and small depths of cut Compatibility determined by holder form, clearance, tolerance class, fastening, size and thickness System components: compatible holder, underlay/clamp set and replacement screws FAQ Which materials is this insert intended for? The TNMG160404 NS9530 insert is specified as a finishing grade for steel; the uncoated cermet composition supports low cutting forces and high surface quality in finishing applications. How is the insert clamped and which holders are suitable? Clamping depends on ISO‑compatible holders that match the insert’s triangular form, 4.76 mm thickness and cylindrical hole; stability is governed by form, clearance, tolerance class, fastening, size and thickness. What cutting tasks suit the NS9530 grade best? NS9530 is optimised for finishing operations with continuous cuts and small depths of cut, where a sharp cutting edge and minimal cutting forces are required to achieve superior surface finish. Is the insert indexable or reversible? The double‑sided design permits rotation to an unused edge according to the holder’s clamping method; check holder compatibility for indexing procedures. What is the ISO designation and article number for ordering? ISO designation: TNMG160404 (160404); Article number / SKU: 6998219‑Tungaloy (manufacturer item number 6998219). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp cermet cutting edge and a compact triangular form for reliable finishing in turning operations; order the inserts directly via Metav Werkzeuge or request application advice from the consultants. TNMG 160404 NS9530 ISO turning insert for precision finishing — Tungaloy TNMG 160404 NS9530 is an ISO‑standard triangular turning insert engineered for fine finishing of steel in continuous cutting applications. ISO‑standard triangular insert Uncoated cermet grade NS9530 Sharp edge for superior surface finish Double‑sided chipbreaker, 0° relief angle Consistent high‑quality finishing with a cermet cutting edge The uncoated cermet NS9530 delivers a sharp cutting edge and low cutting forces, which together translate into a measurable improvement in surface finish for steels. Cermet grades combine ceramic and metallic phases to resist built‑up edge and provide stable cutting at finishing parameters; this means fewer interruptions for rework and more consistent part quality. Where continuous cuts and small depths of cut are standard, the grade offers reduced friction and an improved machined surface, reducing subsequent finishing stages. The combination of a small nose radius and a precise edge geometry supports tight tolerance achievement on external and internal turning operations. Reliable integration in ISO tool systems to reduce setup time Designed to the ISO designation, the insert’s compatibility with holders is determined by form, relief angle, tolerance class, fastening style, size and thickness. The triangular plate form and standard dimensions simplify stocking and allow rapid indexation in compatible holders and boring bars. The insert’s cylindrical hole and standard mounting features ensure repeatable seating and clamping, which reduces vibration and run‑out in the tool system. As a result, tool changeovers are quicker and machine uptime increases, supporting stable production flows and predictable process parameters. Controlled chip formation and predictable tool life for everyday production The double‑sided chipbreaker and the uncoated cermet substrate are tuned for finishing tasks: the chip geometry is controlled to avoid tangling while maintaining a continuous, stable cut. A 0° relief angle and the carefully chosen edge preparation lower cutting forces and wear rates under finishing feeds, extending usable life in appropriate applications. For operations demanding consistent dimensional accuracy and surface integrity, the balanced combination of geometry and material reduces the need for frequent inspection and corrective machining, supporting efficient batch production and repeatable outcomes. Discuss application specifics and availability for Tungaloy finishing inserts with Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation and stock information Technical data Article number: 6998196-Tungaloy Manufacturer article number: 6998196 Manufacturer SKU: TUN6998196 Label: TNMG160404 NS9530 Tungaloy-Wendeplatte Facts ISO designation: TNMG160404 Size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Included hole: with hole (cylindrical) Insert angle: 60° Special features Schneidstofftyp: uncoated cermet (NS9530) Plate form: triangular Chipbreaker: double‑sided Application: turning (external and internal) System: ISO turning insert, compatible with standard holders Typical use: finishing for steel with low cutting forces FAQ What materials is this insert suitable for? The TNMG 160404 NS9530 insert is specified as a finishing grade for steel and is particularly effective in continuous cutting conditions where a sharp cermet edge yields high surface quality. How many indexable edges does the insert provide? With a triangular plate form and a double‑sided chipbreaker, the insert offers multiple indexable edges to extend usable life and reduce per‑edge cost. Is the insert compatible with standard ISO holders? Yes, the ISO designation TNMG160404 ensures compatibility with holders that match the form, size, relief angle and clamping style required for this insert. What finish can be expected on the workpiece? The NS9530 cermet and the sharp edge geometry of the TNMG160404 produce low cutting forces and an improved machined surface, making it suitable where high surface quality is required. Can this insert be used for internal as well as external turning? The TNMG 160404 NS9530 is suitable for both external and internal turning operations when used with appropriate holders or boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a double-sided chipbreaker and a compact 0.4 mm corner radius for efficient, economic turning of cast iron; order genuine Tungaloy inserts from Metav Werkzeuge or consult our specialists for compatibility and optimisation advice. TNMG160404 T505 turning insert — Tungaloy, CVD-coated carbide, 0.4 mm radius The TNMG160404 T505 is an ISO-standard triangular indexable insert designed for general external and internal turning, optimised for economical machining of cast iron with a CVD coating that enhances wear resistance. ISO-standard triangular insert 16 mm CVD-coated carbide grade T505 for cast iron Double-sided chipbreaker for stable chips 0.4 mm corner radius, 60° geometry Cost-efficient cast-iron machining with high wear resistance The combination of a CVD-coated carbide substrate and the T505 grade delivers a balance between wear resistance and economical tool life, making this insert suitable where process stability and tool cost-efficiency matter. The coating reduces flank and crater wear during continuous turning, which extends effective edge life and lowers tool-change frequency. Compatibility with ISO toolholders is determined by form, clearance angle, tolerance class, fixing method, size and thickness, so the insert integrates into existing tool systems with predictable performance. This delivers measurable productivity benefits in batch production and recurring turning operations without demanding changes to the tool setup. Stable chip control and repeatable geometry for consistent surface finish The double-sided chipbreaker and the insert’s triangular form provide reliable chip formation and evacuation in routine turning tasks. The 0.4 mm corner radius and 60° cutting geometry support a controlled cutting edge suited to medium finishing and general turning, helping to achieve a consistent surface quality while maintaining dimensional accuracy. For interrupted cuts or less rigid set-ups, the choice of chipbreaker and grade should be matched to machine stability; selecting the correct combination reduces vibration and optimises tool life, which in turn supports consistent component quality. Practical selection guidance for production-ready setups Use this insert for both external and internal turning operations where cast-iron workpieces are predominant. The indexable design allows economical re-use of edges, and the system typically comprises the ISO insert, a compatible external holder or boring bar, a backing plate or clamping set and replacement screws. When integrating the insert, verify holder compatibility with the insert’s form, relief angle and thickness to ensure secure clamping and precise positioning. Choosing the correct chipbreaker and grade according to workpiece material, interruption severity and desired cut speed will improve efficiency and reduce machining costs in the long term. For genuine Tungaloy TNMG160404 T505 inserts and technical advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast assistance and product availability. Technical data Article number: 6831350 SKU: 6831350-Tungaloy Manufacturer SKU: TUN6831350 Brand: Tungaloy Series: ISO turning indexable insert series Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Grade/coating: T505, CVD-coated carbide Shape: triangular Chipbreaker: double-sided Application: Turning (external and internal) Compatible with ISO holders; compatibility depends on form, clearance, tolerance and fastening FAQ What materials is this insert optimised for? The TNMG160404 T505 insert features a CVD-coated carbide grade optimised for the economical machining of cast iron and comparable materials. Can the TNMG160404 be used for internal turning? Yes, the insert is suitable for both external and internal turning when installed in an appropriate ISO-compatible holder or boring bar. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on this insert promotes stable chip formation and evacuation, reducing build-up and improving process reliability during continuous turning. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius balances strength and finish capability, offering improved edge robustness while enabling good surface quality in general turning tasks. Are replacement clamping parts required when fitting the insert? A standard system consists of the insert, a fitting external holder or boring bar, a backing or clamping set and replacement screws; compatibility must be checked for correct fit and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T505 Wendeplatten - Tungaloy
Take advantage of a combination of CVD-coated carbide for wear resistance, a 0.4 mm corner radius for smooth transitions and secure clamping thanks to the cylindrical hole; order directly via Metav Werkzeuge or consult our technical specialists for application guidance. TNMG 160404 T505 – Indexable Turning Insert for Turning by Tungaloy (CVD-coated carbide, 60°) The TNMG 160404 T505 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for economical machining of cast iron. CVD-coated carbide for wear resistance Triangular 60° geometry for versatile turning Double-sided chipbreaker for reliable chip control Increased economy and tool life when machining cast iron The CVD-coated cemented carbide grade T505 is formulated for economical and consistent machining of cast iron. The coating improves surface hardness and thermal resistance, which reduces flank wear under typical turning conditions. As a consequence, cycle times can remain stable for longer and insert changes are less frequent, contributing to lower overall machining costs. For production-minded workshops this translates into predictable running times and improved part-to-part repeatability. Clear compatibility and secure clamping for ISO holders The insert follows ISO geometry conventions, so compatibility depends on the holder's form, tolerance class, fastening and size. The triangular 60° geometry and 0° clearance suit a broad range of external and internal turning operations, while the cylindrical hole ensures positive and secure seating on the clamping assembly. The 4.76 mm thickness and 16 mm inscribed circle provide structural rigidity for moderate to heavy cuts, helping to avoid chatter when the holder, support and machine setup are correctly selected. Stable chip control and consistent surface quality This grade is supplied with a double-sided chipbreaker that supports repeatable chip segmentation when machining interrupted or continuous cuts in cast iron. The combination of geometry, chip control and the CVD coating helps achieve an improved surface finish with fewer rework cycles. For operators who prefer concrete parameters: the 0.4 mm corner radius aids edge strength and smoother entry/exit, reducing the risk of built-up edge on grey cast iron while preserving dimensional accuracy. For application advice, batch availability or to request cutting data tailored to specific cast iron grades, contact Metav Werkzeuge for prompt technical support and fast delivery of Tungaloy TNMG 160404 T505 inserts. Technical Data Article number: 6831362 SKU: 6831362-Tungaloy Manufacturer SKU: TUN6831362 Model series: ISO turning indexable inserts Key Dimensions Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Features & Materials Material: carbide Coating: CVD-coated Grade: T505 Chipbreaker: double-sided Hole: with cylindrical hole Shape: triangular Application: turning (external & internal) ISO-standard insert FAQ What materials is this insert optimised for? The TNMG 160404 T505 insert is optimised for cast iron machining; the CVD-coated carbide composition provides heat resistance and stable wear when turning grey and nodular cast irons. Can this insert be used in standard ISO triangular holders? Yes. The TNMG 160404 T505 follows ISO geometry; holder compatibility is determined by form, tolerance class, fastening and insert size so the correct ISO triangular holder and clamping set should be selected. How does the T505 grade affect productivity? The T505 grade provides a balance of wear resistance and edge stability, which supports longer tool life and consistent surface finish, reducing downtime for insert changes and post-process rework. Is the insert reversible and what advantage does that provide? This is a double-sided insert, allowing indexation to an unused cutting edge; this extends usable life per insert and reduces tooling costs for repetitive turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise ISO TNMG 160404 geometry and secure double-sided indexing for efficient turning of cast iron; order the TNMG160404 T5105 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 T5105 Turning insert by Tungaloy — CVD-coated carbide, 0.4 mm corner radius The TNMG160404 T5105 is an ISO-standard, triangular turning insert engineered for high-speed machining of cast iron in stable turning operations. CVD-coated carbide grade T5105 ISO TNMG 160404 triangular insert 0.4 mm corner radius for fine finishes Double-sided with cylindrical hole Consistent performance for cast-iron turning The CVD-coated carbide grade T5105 delivers a balance of wear resistance and thermal stability that benefits high-speed machining of cast iron. Under steady cutting conditions the coating reduces flank wear and helps maintain a consistent tool life, which in turn contributes to predictable cycle times and fewer tool changes. The result is improved process reliability and a more economical turning operation when machining grey and ductile cast irons at elevated speeds. Accurate fit and secure clamping for repeatable results As an ISO TNMG 160404 style insert, compatibility with the chosen holder depends on form, free rake angle, tolerance class, fastening method, size and thickness. The insert has a nominal size of 16 mm and a plate thickness of 4.76 mm, with a 0° free angle and a cylindrical hole for standard clamping screws. Ensuring the holder matches these parameters guarantees correct seat geometry and repeatable positioning, which is essential for maintaining cutting stability and surface quality over production runs. Economy through indexing and refined surface finish The triangular shape with an included angle of 60° and a 0.4 mm corner radius provides a practical compromise between strength and surface finish. Being double-sided offers multiple indexed cutting edges per insert, increasing usable cutting edges and lowering unit cost per edge. The modest radius supports improved surface quality on external and internal turning while the insert geometry assists in controlled chip formation when paired with a suitable chipbreaker and cutting parameters. Practical guidance and direct technical assistance To achieve the intended benefits, integrate the insert into a complete system: matching outer holder or boring bar, shim/clamp set and appropriate fixing screws. This insert performs best under stable clamping and process conditions; choose a chipbreaker and grade pairing tailored to the workpiece and machining strategy. For questions about suitability, feeds and speeds or to verify holder compatibility, Metav Werkzeuge provides technical assistance and application advice to support machining optimisation. Contact Metav Werkzeuge for tailored recommendations on Tungaloy TNMG 160404 T5105 inserts and guidance for cast-iron turning; Metav Werkzeuge’s consultants are available to discuss holder compatibility and cutting data. Technical data Article number: 6853013 Manufacturer article number: 6853013 SKU: 6853013-Tungaloy Manufacturer SKU: TUN6853013 Model series: ISO turning indexable inserts Numbers / Core technical data Insert designation: TNMG160404 Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Free angle: 0° Designs / Special features Material: carbide Grade / coating: T5105 (CVD-coated carbide) Plate form: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert suitable for? The TNMG160404 T5105 insert is designed primarily for high-speed machining of cast iron; the T5105 CVD-coated carbide offers wear resistance under stable cutting conditions. How is the insert secured to the holder? This insert features a cylindrical hole for screw clamping; compatibility requires a holder matching the insert’s form, thickness (4.76 mm), size (16 mm), free angle (0°) and tolerance class. How many cutting edges are available per insert? The triangular, double-sided construction provides multiple indexable edges; indexing extends usable life compared with single-edge solutions. Which corner radius and included angle should be chosen for a fine surface? The 0.4 mm corner radius combined with the 60° included angle is suitable for improved surface finish on external and internal turning while maintaining edge strength. Can the TNMG160404 T5105 be used for internal and external turning? Yes, the insert is suitable for both external and internal turning applications when paired with the appropriate holder and process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T5105 for extended wear resistance and the ISO‑standard TNMG160404 form for straightforward replacement in existing toolholders; both features support higher throughput in cast iron turning under stable conditions. Order directly via Metav Werkzeuge or consult their technical team for holder compatibility and process recommendations. TNMG 160404 T5105 turning insert (ISO) – Tungaloy The TNMG160404 T5105 is an ISO‑standard triangular indexable insert for turning, optimised for high‑speed machining of cast iron under stable cutting conditions. CVD‑coated carbide grade T5105 Optimised for high‑speed cast iron turning Triangular ISO form with 60° included angle Double‑sided chipbreaker, cylindrical hole Consistent high productivity through wear‑resistant coating The CVD‑coated carbide grade T5105 combines a hard, wear‑resistant surface with a tough carbide substrate to deliver longer tool life and consistent cutting behaviour in repetitive production runs. In practice, this means fewer interruptions for insert changes and a more predictable tool‑life window, which supports planning for machining cycles and reduces total operating costs. The coating also helps maintain cutting‑edge integrity at elevated cutting speeds, improving process stability during longitudinal and facing operations. Fast integration into ISO‑based tool systems Compliance with the ISO designation ensures that the insert matches established holder geometries: form, clearance angle, tolerance class, fastening method, size and thickness determine fit. The triangular shape with a 60° included angle and a 0° relief angle provides straightforward interchangeability with many external holders and boring bars, reducing setup time. For workshops keeping a standardised inventory, the ISO format simplifies logistics and enables rapid replacements without custom regrinding or adapter work. Controlled chip formation for safer, cleaner machining The double‑sided chipbreaker geometry and the cylindrical clamping hole promote repeatable chip control and stable material evacuation when turning cast iron. Effective chip formation reduces the chance of entanglement and improves surface finish, particularly in steady‑state cuts. For operators, this translates into fewer interrupted cycles and improved component consistency, while the insert’s geometry also helps to moderate cutting forces, which can reduce vibration and extend both insert and holder life. Practical dimensions and application guidance The insert is manufactured from carbide and comes in a compact triangular form with a nominal size of 16 mm, a thickness of 4.76 mm and a corner radius of 0.4 mm, making it suitable for finishing to medium turning operations where a fine edge and controlled engagement are required. The product is supplied as a system component concept: an ISO insert paired with a compatible external holder or boring bar, plus the necessary support/clamp set and replacement screws for secure mounting. Select the chipbreaker variant and grade according to workpiece material, machining type and machine/fixture stability to achieve the intended performance. For process‑critical cast iron turning, request the Tungaloy TNMG 160404 T5105 insert and technical pairing advice from Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for holder recommendations and cutting parameter guidance. Technical data Article number: 6850277 Manufacturer: Tungaloy Designation: TNMG160404 T5105 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features CVD‑coated carbide grade T5105 Double‑sided chipbreaker Triangular insert with cylindrical hole ISO‑standard turning insert for cast iron machining System concept: insert, holder, clamp set and replacement screws FAQ Is this insert suitable for cast iron applications? The TNMG160404 T5105 insert is formulated for high‑speed machining of cast iron and delivers good wear resistance under stable cutting conditions. How does the chipbreaker affect surface finish? The double‑sided chipbreaker on this insert promotes consistent chip formation, which contributes to improved surface finish and reduced risk of chip interference. What holder features must be checked for compatibility? Compatibility depends on the holder’s seat form, clearance angle, tolerance class, fastening method, size and insert thickness; matching these ensures correct clamping and performance. Can the insert be used for roughing and finishing? With a corner radius of 0.4 mm and the CVD‑coated grade, the insert is suited to finishing and medium cuts; for heavy roughing, a different geometry or larger radius may be preferable. Where can cutting parameters and holder recommendations be obtained? Cutting data and holder pairing advice are available from Metav Werkzeuge; their consultants can provide machine‑specific recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5105 grade and the ISO TNMG form for productive, wear‑resistant turning in cast iron; the combination of a 0.4 mm nose radius and a double‑sided chipbreaker supports consistent surface quality and long tool life. Order directly via Metav Werkzeuge or ask the consultants for tailored application advice. TNMG 160404 T5105 turning insert by Tungaloy — CVD‑coated carbide, triangular ISO insert The TNMG160404 T5105 is an ISO‑format triangular turning insert engineered for high‑speed machining of cast iron under stable setup conditions. CVD‑coated carbide T5105 for cast iron ISO TNMG 160404 triangular insert, 16 mm size 0.4 mm nose radius for fine surface finish Double‑sided chipbreaker with cylindrical hole for secure clamp Optimised wear resistance for high‑speed cast iron turning The CVD‑coated carbide grade T5105 combines a hard coating with a tough substrate to provide controlled wear progression when machining cast iron at elevated speeds. This composition reduces flank wear and extends usable life, which in turn lowers machining costs per component. CVD coating is a chemical vapour deposition layer applied to improve abrasion resistance; in practice, this means the insert keeps a sharper cutting edge for longer and maintains dimensional stability on critical turning operations. The result is predictable tool change intervals and reduced rework. Seamless compatibility with ISO tooling for quick integration Supplied in the ISO TNMG format, the insert fits standard triangular holder pockets with compatibility determined by shape, relief angle, tolerance class, fastening method, size and thickness. The triangular geometry and cylindrical hole enable positive clamping in most external holders or boring bars designed for TNMG inserts, while the plate thickness of 4.76 mm supports rigid seating. This standardisation facilitates rapid replacement and minimal setup time, so machining cells can be returned to production quickly after tool changes. Consistent surface finish and chip control in productive setups The double‑sided chipbreaker geometry and 0.4 mm nose radius support a balance between surface finish and material removal rate on external and internal turning operations. A small radius improves profile accuracy and reduces the need for finishing passes when the machining setup is stable; conversely, the chipbreaker design aids predictable chip formation and evacuation when cutting cast iron. For best results, the insert performs under controlled cutting parameters and rigid fixturing, delivering repeatable surface quality and machining stability. Contact Metav Werkzeuge for application guidance on the Tungaloy TNMG160404 T5105 insert or to request cutting data matched to specific cast iron grades via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850275 Manufacturer SKU: TUN6850275 Manufacturer article number: 6850275 Manufacturer: Tungaloy Material: carbide Facts ISO designation: 160404 Size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Insert included hole: with hole Hole style: cylindrical Included angle: 60° Chipbreaker: double-sided Special features Series: ISO turning indexable inserts Grade/coating: T5105 (CVD‑coated) Geometry: triangular Application: turning Typical use: external and internal turning for cast iron Compatibility criteria: form, relief angle, tolerance class, fastening, size and thickness System components: insert, matching outer holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The TNMG160404 T5105 insert is designed primarily for machining cast iron and is optimised for high‑speed conditions when a stable setup is used. Which holder types are compatible with this ISO insert? Compatibility is achieved with standard ISO TNMG holders and boring bars that accept triangular inserts; the seat form, relief angle and clamp system must match the TNMG 160404 dimensions. What advantages does the T5105 grade provide? T5105 (CVD‑coated carbide) offers improved abrasion resistance and predictable wear characteristics, enhancing tool life and process stability for cast iron turning. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius helps produce a finer surface finish and accurate profiles while keeping the cutting forces moderate, which is beneficial in stable turning setups. Is the insert reversible and how many cutting edges are available? The double‑sided triangular design provides multiple usable cutting edges per insert, enabling economical use of each indexable plate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T5105 Wendeplatten - Tungaloy
Take advantage of CVD‑coated carbide (T5105) and a 0.4 mm nose radius for dependable high‑speed machining of cast iron; the ISO‑standard triangular format ensures straightforward replacement and economical indexing. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal grade selection. TNMG160404 T5105 Turning Insert by Tungaloy — CVD-coated carbide for high‑speed cast iron turning A TNMG160404 T5105 triangular turning insert designed for external and internal turning, optimised for stable, high‑speed machining of cast iron under steady cutting conditions CVD-coated carbide for wear resistance Optimised for high-speed cast iron turning ISO TNMG 160404 triangular profile Double-sided chipbreaker, cylindrical hole Faster throughput thanks to a wear‑resistant CVD grade The CVD‑coated T5105 grade combines a hard, wear‑resistant top layer with a tough carbide substrate to extend tool life under elevated cutting speeds. This coating system improves flank and crater wear resistance, which translates into longer uninterrupted cycles and fewer insert changes. For workshops aiming to raise throughput, the hardened surface layer reduces edge breakdown and maintains dimensional stability over longer runs, supporting predictable process parameters and consistent surface finish. Reliable fit and secure clamping for predictable results Designed to ISO geometry, the triangular TNMG160404 form and the 60° included angle deliver a balance of rigidity and access for a wide range of turning tasks. The insert’s 0° clearance and 0.4 mm nose radius favour strong cutting edges for interrupted cuts while still enabling a good surface quality where required. The cylindrical hole and standard thickness of 4.76 mm permit secure mounting with common clamps and screw assemblies; correct selection of holder by form, tolerance class, fastening method, size and thickness ensures repeatable positioning and stable chip load. Improved chip control and everyday shop‑floor reliability The double‑sided chipbreaker is engineered for reliable chip formation in grey and nodular cast iron, supporting efficient evacuation and reducing the risk of re‑cutting. Being double‑sided, each insert offers multiple indexable edges, improving economy per edge and reducing tool inventory turnover. In practice this leads to less machine downtime, steadier cycle times and predictable component quality. If there is any uncertainty about holder compatibility or optimal cutting data for specific cast iron grades, technical advice is available to align insert grade and chipbreaker to the application. For tailored advice on integrating Tungaloy’s T5105 inserts into existing tooling systems, and for reliable supply via Metav Werkzeuge, contact our technical consultants at Metav Werkzeuge for prompt guidance and delivery. Technical data Article number: 6850280-Tungaloy Manufacturer SKU: TUN6850280 Manufacturer article number: 6850280 Model series: ISO turning indexable inserts Designation: TNMG160404 Facts Nose radius: 0.4 mm Insert size: 16 Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features CVD-coated carbide (T5105) Double-sided chipbreaker Triangular insert shape Suitable for cast iron machining Designed for external and internal turning Compatibility determined by form, fastening and tolerance FAQ What materials is this insert best suited for? The T5105 CVD‑coated grade is formulated for reliable high‑speed machining of cast iron, offering good wear resistance and consistent chip control with grey and nodular cast iron. How does the 0.4 mm nose radius affect finish and strength? A 0.4 mm nose radius balances edge strength and surface finish; it improves component integrity under interrupted cutting while still allowing acceptable surface roughness for many turning operations. Is the TNMG160404 insert compatible with standard TNMG holders? The TNMG160404 follows ISO geometry, but compatibility depends on holder form, tolerance class, fastening and thickness; confirm holder match or consult Metav Werkzeuge for verification. How many usable edges does the insert provide? With a double‑sided chipbreaker and triangular shape, the insert offers multiple indexable edges, enhancing economy per insert and reducing changeover frequency. Where can cutting data and application advice be obtained? Application recommendations and cutting parameters for the TNMG160404 T5105 insert are available from Metav Werkzeuge’s technical team; contact details are provided for rapid assistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T5115 for balanced wear resistance and edge stability, combined with the TNMG triangular form for flexible external and internal turning; order directly via Metav Werkzeuge or contact the consultants for compatibility checks. TNMG 160404 T5115 Turning Insert — Indexable Turning Insert for Turning — Tungaloy A TNMG160404 T5115 indexable turning insert, designed for external and internal turning with a CVD-coated carbide grade that balances wear resistance and edge stability for cast iron machining. CVD-coated carbide grade T5115 Universal for cast iron machining Triangular TNMG form, 60° cutting angle Reliable edge stability for cast iron turning The CVD-coated carbide grade T5115 is formulated to provide a consistent balance between wear resistance and cutting-edge robustness when machining cast iron. This composition reduces flank wear and helps maintain surface finish over extended tool life, which translates into fewer insert changes and more stable cycle times. The 0.4 mm nose radius supports a good compromise between strength and profile accuracy, allowing controlled chip formation without sacrificing dimensional stability on external and internal turning operations. ISO compatibility and secure clamping for predictable productivity Designed to the ISO-standard insert geometry, the triangular profile with a 60° included angle ensures wide compatibility with standard TNMG holders and boring bars. Compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; the insert features a cylindrical hole for secure screw clamping and a double-sided chipbreaker for alternating use. The ISO conformity simplifies replacement logistics and contributes to predictable manufacturing results by minimising setup variation and ensuring repeatable clamping. Practical system advantages that reduce downtime Using an indexable insert system around this triangular insert reduces regrind cycles and inventory complexity. The componentised approach — insert, suitable external holder or boring bar, shim/clamp set and replacement screws — enables rapid index changes and simple stock management. The combination of a double-sided geometry and a robust substrate delivers economic machining: fewer interruptions for tool changes and a reliable path to consistent part quality. If uncertainty remains about holder selection or process parameters, technical advice and machining data are available to refine cutting conditions and extend tool life. Contact Metav Werkzeuge for tailored advice and to secure the TNMG 160404 T5115 CVD-coated carbide insert for reliable cast iron turning. Technical data Article number: 6850276 Manufacturer SKU: TUN6850276 SKU: 6850276-Tungaloy Description: TNMG160404 T5115 Tungaloy indexable turning insert Model series: ISO indexable turning inserts Core specifications Insert ISO designation: 160404 Insert size: 16 mm Insert thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Cutting angle: 60° Hole: with cylindrical hole Design & special features Material: carbide Coating: CVD coating, grade T5115 Shape: triangular (TNMG) Chipbreaker: double-sided Application: external and internal turning Compatibility: requires matching holder shape, relief angle, tolerance class, fastening, size and thickness Clamping: screw clamping via cylindrical hole FAQ Which materials is this insert suited for? The TNMG 160404 T5115 insert is a universal grade optimised for cast iron machining, providing balanced wear resistance and edge stability for typical turning applications. Can the insert be clamped in standard TNMG holders? Yes, the insert follows ISO geometry for TNMG forms; clamping is performed via the cylindrical hole and requires a holder that matches form, relief angle, tolerance class, fastening, size and thickness. Is the chipformer reversible or indexable on both sides? The insert provides a double-sided chipbreaker, allowing indexing to a fresh cutting edge and extending usable life before replacement. What edge preparation and nose radius are available on this insert? This insert features a 0.4 mm nose radius, which offers a compromise between edge strength and profile precision for general turning operations. How does the CVD coating benefit machining performance? The CVD-coated surface enhances wear resistance at elevated temperatures and improves edge life, particularly when machining abrasive cast iron materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, versatile chip control and ISO compatibility for consistent production results; the insert’s CVD‑coated carbide and 0.4 mm corner radius deliver wear resistance and predictable tool life. Order the TNMG160404 T5115 insert directly via Metav Werkzeuge or consult the team for application support. TNMG160404 T5115 – ISO indexable turning insert for turning, CVD‑coated carbide (Tungaloy) The TNMG160404 T5115 is an ISO‑standard indexable insert for external and internal turning, optimised for productive machining of cast iron with a stable cutting edge and standardised mounting. CVD‑coated carbide grade T5115 Triangular 60° geometry with 0.4 mm radius Double‑sided insert with cylindrical hole ISO 160404 standardised turning plate Designed for cast iron machining Increased productivity for cast iron turning The combination of a CVD‑coated surface and a robust carbide substrate provides a dependable balance between wear resistance and edge strength. This results in fewer interruptions for tool changes and steadier component quality when machining cast iron, especially in interrupted cuts. The moderate 0.4 mm corner radius improves edge robustness while maintaining dimensional control, so cycle times can be optimised without sacrificing surface finish. For production environments seeking predictable tool life and repeatable results, this grade supports higher machining stability and lower per‑part tooling costs. Secure seating and ISO compatibility for reduced setup time The insert’s ISO 160404 designation and standardised geometry ensure straightforward compatibility with a wide range of external holders and boring bars. The triangular 60° geometry and the cylindrical hole provide reliable clamping and repeatable seating, which reduces setup variation and rework. Because the form, relief angle and tolerance class conform to ISO norms, integration into existing tooling systems is simplified and downtime for requalification is minimised—an operational advantage where fixture interchangeability and quick changeover are important. Coating and substrate designed for longer service life The T5115 specification is a universal CVD‑coated carbide grade developed for broad applicability in cast iron work. The chemical vapour deposition layer enhances resistance to abrasive wear and thermal loading, while the carbide core maintains a stable cutting edge under mechanical stress. The double‑sided nature of the insert effectively doubles available cutting edges per plate, improving cost efficiency. Additionally, the applied chipforming geometry contributes to controlled chip flow, reducing the risk of built‑up edge and improving surface integrity on finished components. Practical application advice for efficient results Select a holder and cutting parameters that match the insert’s geometry and the workpiece rigidity to exploit the chipbreaker and grade benefits fully. The TNMG format performs well with moderate feeds and cutting speeds typical for cast iron; the double‑sided layout and standard thickness support consistent performance across multiple seats. For interrupted cuts or less rigid setups, favour lower depths of cut and slightly reduced speeds to preserve edge life. When integrating into production, verify the holder seating face and clamping torque to maintain the ISO‑defined tolerances and ensure repeatable accuracy. For high‑productivity cast iron turning with Tungaloy’s CVD‑coated T5115 grade, contact Metav Werkzeuge for tailored advice and swift supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850278 Manufacturer SKU: TUN6850278 SKU: 6850278-Tungaloy Model series: ISO‑indexable turning inserts Grade: T5115 Insert designation: TNMG160404 Shape: triangular Hole style: cylindrical hole Substrate: carbide Core data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief angle: 0° ISO code: 160404 Special features CVD‑coated carbide Double‑sided chipbreaker ISO‑standardised geometry for compatibility Designed for turning (external and internal) Optimised for cast iron machining FAQ What materials is this insert best suited for? The TNMG160404 T5115 insert is optimised for cast iron machining; the T5115 grade provides a balanced combination of wear resistance and edge stability for this material. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and reduces chipping risk compared with finer radii, improving durability in interrupted cuts while still enabling acceptable surface finish. How many usable cutting edges does each insert provide? The triangular, double‑sided design offers multiple indexed edges; the exact number depends on the insert orientation, but the format increases the service life per insert compared with single‑edged plates. Which holders are compatible with this insert format? Holders and boring bars that accept ISO TNMG160404 geometry with matching relief angle and clamping provisions will be compatible; correct seating and torque are essential for repeatable performance. What is the benefit of the CVD coating on this grade? The CVD layer enhances resistance to abrasive wear and thermal effects, extending edge life and stabilising cutting performance during longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, double-sided chip control, and ISO compatibility for dependable cast-iron turning and extended machining cycles; order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404 T5115 TNMG Turning Insert — CVD-coated carbide, 60°, Tungaloy A TNMG160404 T5115 turning insert engineered for ISO-standard external and internal turning, optimised for machining cast iron with stable edge life. CVD-coated carbide T5115 universal grade ISO-standard triangular insert, 60° angle 0.4 mm corner radius for precise finishing Double-sided chipbreaker; cylindrical hole Longer tool life through balanced coating and grade The combination of a CVD-coated surface and a purpose-designed grade provides enhanced wear resistance while maintaining cutting-edge stability, which directly reduces tool changes and machine downtime. This insert’s T5115 composition is a universal solution for cast-iron machining: it balances hardness and edge support so that turning operations deliver consistent surface quality and predictable tool life. The measured improvement in flank wear translates into fewer interruptions and more reliable cycle times on production runs. Simple integration and ISO interchangeability Designed to the ISO geometry, the triangular 16 mm insert with a 4.76 mm thickness and a cylindrical hole fits a broad range of standard holders when matching form, relief angle and tolerance class. The zero-degree relief angle and the 60° included angle make the insert suitable for both external and internal turning where compact geometry is required. Clear specification of size, thickness and hole style simplifies tool inventory management and speeds up changeovers, ensuring fast, repeatable set-up and stable clamping in approved toolholders. Improved process reliability and controllable chip formation A double-sided chipbreaker and a 0.4 mm corner radius support reliable chip control and permit fine finishing without sacrificing productivity. Controlled chip formation reduces the risk of tool or workpiece damage and eases handling at the machine, which is particularly beneficial in automated or high-throughput environments. The design therefore contributes to measurable production gains: longer uninterrupted runs, fewer quality reworks and improved operator confidence under varying cutting conditions. Contact Metav Werkzeuge today to specify the right Tungaloy TNMG160404 T5115 insert for cast-iron turning or to obtain tailored application support from our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Item number: 6853014 Manufacturer SKU: TUN6853014 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Special features CVD-coated carbide grade T5115 Universal grade for cast iron Triangular insert form Double-sided chipbreaker Cylindrical hole ISO-standard geometry Designed for external and internal turning FAQ What materials is this insert best suited for? This Tungaloy TNMG160404 T5115 insert is specified as a universal grade for machining cast iron, offering a balanced combination of wear resistance and edge stability suitable for a wide range of grey and nodular cast-iron applications. How is chip control achieved with this insert? Chip control is managed by the double-sided chipbreaker integrated into the insert geometry; the combination of chipbreaker design and the T5115 CVD-coated carbide substrate promotes predictable chip breaking and safe evacuation. Will the insert fit existing ISO holders? The insert follows ISO geometry (16 mm triangular form, 4.76 mm thickness, cylindrical hole); compatibility depends on matching the holder’s pocket form, relief angle and tolerance class, allowing straightforward interchangeability with compliant toolholders. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius strikes a balance between strength and finishability: it supports a durable cutting edge while enabling fine surface quality in finishing passes, reducing the need for additional finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5115 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance, stable cutting edge and standardised ISO compatibility to keep turning operations consistent and productive; order the inserts via Metav Werkzeuge or consult our technical advisers for matching holders and clamping components. TNMG 160404 T5115 turning insert, triangular, 60° – Tungaloy The TNMG160404 T5115 is a CVD‑coated carbide turning insert designed for external and internal turning, offering a universal grade especially suited to cast iron machining. ISO triangular turning insert 60° angle CVD-coated carbide grade T5115 for cast iron Double-sided chipbreaker for versatile use Cylindrical hole for secure clamping Versatile performance for cast iron turning with predictable results The combination of a CVD‑coated carbide substrate and the T5115 grade provides a balanced mix of wear resistance and edge stability, making the insert suitable for a wide range of cast iron turning tasks. The double‑sided chipbreaker supports consistent chip control across varying cutting conditions, which reduces the risk of unexpected interruptions and improves component quality. For users less familiar with coatings: CVD coating forms a thin, hard layer that improves resistance to abrasive wear while maintaining a reliable cutting edge, so tool life is extended without complex process changes. Standardised form and secure clamping to reduce setup time Manufactured to ISO dimensions with a triangular profile and 60° cutting angle, the insert ensures compatibility with holders that match form, relief angle and tolerance class. The cylindrical hole and the specified dimensions—16 mm inscribed circle and 4.76 mm thickness—facilitate repeatable seating and secure clamping, reducing time spent on indexing and replacement. Clear standardisation means fewer setup errors and easier stock management when multiple operators are involved, supporting smoother production workflows. Cost‑effective handling and predictable productivity gains With a 0.4 mm corner radius and a geometry tailored for turning, the insert can be used for both finishing and light roughing depending on feed and depth of cut, delivering a favourable balance between surface quality and tool life. Being double‑sided improves cost efficiency because the same cutting edge can be indexed multiple times before replacement. When combined with an appropriate holder, shim and clamp set, the system minimises vibration and enhances process stability, which is particularly valuable in batch production where consistent tolerances are required. Contact Metav Werkzeuge to request matching holders, shims and original Tungaloy TNMG160404 T5115 turning inserts for reliable, productive machining; eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: 6850281 Manufacturer SKU: TUN6850281 SKU: 6850281-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 Grade/coating: T5115 (CVD-coated carbide) Material: Hartmetall Core specifications Cutting angle: 60° Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 16 mm Relief angle: 0° Hole: with cylindrical hole Shape: triangular Chipbreaker: double-sided Features and application Application: turning (external and internal) Recommended material: cast iron Typical system components: outer holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Universal grade offering balanced wear resistance and edge stability FAQ What materials is this insert best suited for? The TNMG160404 T5115 turning insert from Tungaloy is a universal grade especially suited to cast iron machining, offering a balance of wear resistance and edge stability. How is the insert mounted and secured? The insert features a cylindrical hole and ISO‑standard form; it is clamped in a compatible holder or boring bar with the appropriate shim and screws to ensure secure seating and repeatable positioning. Can the insert be indexed for multiple uses? Yes, the insert is double‑sided, allowing edges to be indexed and reused, which improves cost efficiency and extends service intervals. Which dimensions are important for matching a holder? Key specifications to match are the ISO designation TNMG160404, the 60° angle, 16 mm inscribed circle, 4.76 mm thickness and the corner radius of 0.4 mm. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5125 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide T5125, a triangular ISO insert with 60° geometry, and a 0.4 mm corner radius for dependable interrupted cutting and consistent tool life; order the TNMG160404 T5125 Tungaloy insert directly via Metav Werkzeuge or consult the technical advisors if needed. TNMG160404 T5125 TNMG turning insert (ISO triangular, 60°) — Tungaloy TNMG160404 T5125 is an ISO‑standard triangular indexable insert for external and internal turning, optimised for interrupted cuts and less stable machining conditions CVD‑coated grade T5125 for tougher conditions Triangular ISO insert with 60° cutting angle 0.4 mm corner radius for precise finishing Double‑sided chipbreaker with cylindrical hole Dependable performance for interrupted turning The CVD‑coated carbide grade T5125 is formulated to deliver increased toughness where cuts are interrupted or clamping stability is limited. As an ISO triangular insert with a 60° included angle, it provides a balance between cutting strength and access to the workpiece; the 0.4 mm corner radius supports consistent edge engagement and predictable tool forces. In practice this means fewer edge failures during plunging or interrupted passes and a more stable production flow when machining cast iron parts under varying conditions. Coating and substrate explained for reliable application A CVD (chemical vapour deposition) hard coating on a carbide substrate combines wear resistance with an underlying toughness that resists chipping. The CVD coating reduces flank wear and maintains a sharp cutting edge, while the carbide body absorbs shock in interrupted cuts. This technical pairing helps to extend effective edge life and keeps cycle times steady, so machining cycles deliver repeatable component quality without over‑sizing allowances for tool loss. ISO compatibility and straightforward toolholder matching The insert follows ISO specifications for turning plates, so holder compatibility is determined by form, relief angle, tolerance class, clamping and thickness. The triangular shape and cylindrical hole allow clamping in many standard TNMG‑capable holders and boring bars; the double‑sided design doubles available cutting edges per insert. Specification‑driven exchange and predictable positioning reduce set‑up time and help standardise inventory across the production shop floor. Production advantages and economical edge management Because the insert is double‑sided, the effective cost per cutting edge is reduced and replacement intervals are simplified. The robust grade and chipbreaker design support stable chip formation in cast iron, lowering the risk of secondary operations and rework. More consistent tool life contributes to predictable tooling budgets and fewer unplanned tool offsets, which in turn supports an efficient, high‑uptime machining process. Surface quality and selection guidance The 0.4 mm corner radius moderates cutting forces while still enabling good surface finish on typical cast iron components; a larger radius would improve finish at the expense of cutting load, while a smaller radius shortens edge life under impact. Selecting the double‑sided chipbreaker tailored to the material and feed conditions will ensure controlled chip flow and protect the insert edge during interrupted cuts. For external and internal turning, pair the insert with holders matched to the ISO form and thickness to achieve repeatable clamping and orientation. For high‑reliability interrupted turning, prefer the Tungaloy T5125 grade and contact Metav Werkzeuge for application advice or procurement through their technical team. Technical data Article number: 6850282 Manufacturer SKU: TUN6850282 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Shape: triangular Brand: Tungaloy Facts Insert designation: TNMG160404 ISO code: 160404 Grade: T5125 Corner radius: 0.4 mm Thickness: 4.76 mm Size: 16 mm Cutting angle: 60° Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double‑sided Special features CVD‑coated carbide substrate Suited for interrupted cuts and less stable conditions Designed for turning (external and internal) Double‑sided indexable insert ISO‑standard geometry for broad holder compatibility Triangular plate for three cutting edges per side Cylindrical hole for positive clamping FAQ What materials is this insert optimised for? The TNMG160404 T5125 insert is optimised for cast iron machining; the tougher T5125 grade and chipbreaker design are selected to handle interrupted cuts typical in cast iron work. Can this insert be used in standard ISO holders? Yes. The insert follows ISO dimensions and the triangular form, thickness and cylindrical hole permit use in standard TNMG‑compatible holders and boring bars when the holder matches the ISO form and tolerance. How many cutting edges are available per insert? Thanks to the triangular, double‑sided design, the insert provides multiple indexable cutting edges, which reduces cost per edge and simplifies tool management. What does the 0.4 mm corner radius affect in practice? A 0.4 mm corner radius offers a compromise between surface finish and edge strength: it helps produce a consistent finish while reducing the chance of chipping under interrupted loading. Is the T5125 grade coated and what benefit does that provide? The T5125 variant is a CVD‑coated carbide; the coating improves wear resistance while the tougher substrate resists chipping in interrupted operations, increasing productive tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T5125 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T5125 grade, a robust carbide substrate and a precise 60° triangular geometry to improve productivity in turning operations; order directly via Metav Werkzeuge or consult our team for application-specific advice. TNMG 160404 T5125 – ISO turning insert, 60° triangular by Tungaloy A durable ISO-standard TNMG160404 T5125 indexable insert engineered for turning, optimised for interrupted cuts in cast iron and less stable machining conditions. CVD-coated carbide grade T5125 Optimised for interrupted cuts in cast iron Triangular 60° form with 0.4 mm radius Double-sided chipbreaker, cylindrical hole for clamping Robust grade for demanding cast-iron turning The combination of a CVD-coated surface and a tough carbide substrate gives a balanced performance when machining cast iron under interrupted cutting conditions. The T5125 grade is formulated to resist chipping and maintain cutting-edge integrity where stability is limited, which reduces unplanned tool changes and contributes to a steadier production flow. This section explains why the coating and substrate matter and how they translate into longer effective life for the insert. Geometry and clamping that support consistent results A 60° triangular shape and a 0.4 mm corner radius deliver a compromise between edge strength and form-holding for turning. The plate thickness of 4.76 mm and a standard 16 mm size provide structural rigidity, while the cylindrical hole ensures secure clamping in compatible holders. The double-sided chipbreaker improves chip control and allows economical re‑indexing; together, these features reduce vibration and help achieve repeatable dimensional accuracy during external and internal turning. Practical selection and system compatibility for reliable productivity Compatibility with the holder is governed by form, clearance, tolerance class, fastening, size and thickness, so the insert must be matched to the toolholder and clamping system for optimum performance. The ISO standard designation simplifies selection inside a modular system: choose the appropriate chipbreaker and holder stiffness to suit the workpiece and cutting conditions. For set-ups that alternate between heavy interruptions and more stable cuts, this indexable insert provides a pragmatic compromise between robustness and surface quality. Contact Metav Werkzeuge for tailored technical advice or a quotation for Tungaloy inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6853015 Manufacturer SKU: TUN6853015 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Material: carbide Coating/grade: T5125 (CVD-coated) Application: Turning Designation: TNMG160404 Shape: triangular Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Special features Double-sided chipbreaker Suited for interrupted cuts and less stable conditions ISO-standard geometry for holder compatibility Robust grade for cast iron machining FAQ Which materials is this insert best suited for? The TNMG160404 T5125 insert (Tungaloy, SKU TUN6853015) is optimised for cast iron, particularly where interrupted cuts or reduced rigidity demand a tougher grade. How does the 60° triangular geometry affect cutting performance? A 60° triangular form concentrates strength at the corner, and the 0.4 mm radius on the TNMG160404 balances edge robustness with the ability to produce acceptable surface quality under varying conditions. Is the insert reversible and how does the chipbreaker help? The double-sided chipbreaker allows re-indexing of the cutting edge to extend tool life; the design also improves chip control for safer evacuation and reduced risk of built-up edge. What determines whether this insert fits a specific holder? Compatibility is defined by form, clearance (free) angle, tolerance class, fastening method, size and thickness; confirm these parameters to ensure correct seating and clamping of the TNMG160404 insert. Is this grade suitable for finishing operations? T5125 is a tougher, CVD-coated grade tailored for interrupted cuts and less stable conditions; for high-precision finishing on stable set-ups, a finer-grain or different-coated grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T5125 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry and the CVD‑coated carbide T5125 grade for reliable performance in interrupted turning of cast iron; the triangular, double‑sided design ensures efficient indexability and stable chip control — order via Metav Werkzeuge or consult our specialists for application advice. TNMG160404 T5125 turning insert by Tungaloy — triangular 60° insert for turning The TNMG160404 T5125 is an ISO‑standard triangular turning insert designed for external and internal turning, optimised for interrupted cuts and less stable machining conditions. ISO‑standard TNMG160404 geometry CVD‑coated carbide grade T5125 Double‑sided chipbreaker for stability Suited to cast iron and interrupted cuts Consistent cutting performance under interrupted conditions The combination of a CVD‑coated carbide substrate and the T5125 grade provides a balance between toughness and wear resistance that is especially valuable for interrupted turning operations. The coating reduces abrasive wear while the tougher substrate contributes to edge stability when cuts are discontinuous, so lengthier tool life and fewer indexing cycles can be expected. This yields improved process efficiency and reduced tooling-related downtime in series and jobbing work. Straightforward holder compatibility reduces setup time As an ISO‑standard insert, compatibility with suitable holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert’s 60° triangular shape, 16 mm size and 4.76 mm thickness mean straightforward selection of compatible external holders or boring bars, and the 0° clearance specification clarifies seating and relief requirements. Clear dimensional standards simplify inventory and lower setup times during tool changeovers. Material and chip control that protect the cutting edge The grade is formulated as a tough carbide variant with a CVD coating, making it particularly resistant to the chipping and flank wear often encountered with cast iron and unstable clamping. The double‑sided chipbreaker design promotes predictable chip formation and evacuation, which reduces heat concentration at the cutting edge and supports consistent surface finish. As a result, component quality remains stable across batches and tool costs are better amortised. System approach and recommended use for reliable results The insert works as part of a complete system comprising the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Select the doppelseitig chipbreaker variant and the T5125 grade when machining cast iron or when interrupted cuts are likely; for higher stability and continuous finishing cuts consider alternative chipbreakers or grades. Simple system planning and correct selection of holder and clamp lead to fewer stoppages and reproducible machining outcomes. For tailored application support and to secure Tungaloy TNMG160404 T5125 inserts for turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will advise on the optimal chipbreaker, holder compatibility and inventory options Technical data Article number: 6850279 SKU: 6850279-Tungaloy Manufacturer SKU: TUN6850279 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm ISO code: 160404 Special features CVD‑coated carbide Grade T5125 (tough variant for cast iron) Triangular insert, double‑sided chipbreaker Cylindrical hole ISO‑standard indexable turning insert Typical use: external and internal turning, interrupted cuts System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The TNMG160404 T5125 insert is intended primarily for machining cast iron, and its tough carbide formulation and CVD coating make it suitable where interrupted cuts and less stable conditions occur. How does the T5125 grade affect performance? T5125 denotes a tough, CVD‑coated carbide grade designed to resist chipping and provide stable cutting in interrupted operations; it balances wear resistance and edge strength for reliable production. Which holders are compatible with this ISO insert? Compatibility depends on holder form, tolerance class, fixing method, size and thickness; the ISO‑standard TNMG160404 geometry allows selection of matching external holders or boring bars that accept 16 mm triangular inserts. Is the insert designed for external and internal turning? Yes — the insert is suitable for both external and internal turning applications when paired with the appropriate holder and clamping components. What chip control can be expected during interrupted cuts? The double‑sided chipbreaker promotes stable chip formation and evacuation, which reduces heat at the cutting edge and helps maintain consistent surface quality during interrupted machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T515 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide performance and the rigid 60° triangular geometry to achieve stable chip formation and reliable cycle times in cast-iron turning; order directly through Metav Werkzeuge or request tailored advice from their specialists. TNMG 160404 T515 Turning insert TNMG160404 T515 for Turning — Tungaloy TNMG160404 T515 is an ISO-format indexable turning insert designed for economical machining of cast iron with a CVD-coated carbide grade from Tungaloy. TNMG 160404 T515 CVD-coated carbide 60° triangular insert with 0° rake Double-sided chipbreaker for cast iron 0.4 mm corner radius, cylindrical hole Economical cast-iron machining with proven grade benefits The T515 grade combines a CVD-coated surface with a tough carbide substrate to balance wear resistance and fracture toughness for interrupted or stable turning of cast iron. The coating reduces flank wear at higher cutting speeds while the substrate maintains edge integrity under vibration. For production environments seeking lower unit costs, this geometry-and-grade pairing supports longer life per edge and consistent surface finish, reducing tool-change frequency and unplanned downtime. Geometry that promotes process stability and repeatable results The triangular form with a 60° included angle provides three usable cutting edges per insert and a compact cutting profile that helps maintain rigidity in both external and internal turning operations. The 0° rake and 0.4 mm corner radius give a conservative, robust edge that tolerates varying feed rates and interrupted cuts. The 4.76 mm thickness increases clamping stability, so the system resists deflection under moderate cutting forces; this translates into repeatable component tolerances and predictable wear rates. System compatibility and practical handling for workshop integration These inserts conform to ISO plate standards, making them interchangeable with compatible holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The insert is double-sided with a cylindrical hole, allowing economical indexing and simple clamping; replacement is performed with the matching shim/clamp set and screws. The recommended system consists of the insert, a suitable external holder or boring bar, a shim/clamp kit and spare fastening screws, enabling quick integration into existing toolholders and reduced set-up time. Selecting the correct chipbreaker and operating window The double-sided chipbreaker included on this grade is optimised for stable chip control in grey and nodular cast irons; select the chipbreaker and the T515 grade based on part rigidity, depth of cut and desired cutting speed. The CVD coating supports elevated cutting speeds, but dry or low-coolant conditions should be validated on the specific workpiece and machine to ensure consistent chip formation and surface integrity. Practical advice for specifiers and buyers Specification should list the ISO designation, edge radius and hole style to ensure correct holder matching. When encountering interrupted cuts or vibration-sensitive set-ups, consider a smaller corner radius or alternate clamping to increase edge strength. For questions on holder compatibility or process parameters, technical documentation and machining data sheets are recommended to define feeds and speeds for the specific cast-iron grade and machine power. Should further technical information or procurement assistance be required, contact Metav Werkzeuge for expert guidance and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will advise on optimal integration and supply options for Tungaloy turning solutions. Technical data Article number: 6733837 Manufacturer SKU: TUN6733837 SKU: 6733837-Tungaloy Model series: ISO turning inserts Material: carbide Grade / coating: T515 / CVD-coated Numbers / core technical data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Rake angle: 0° Manufacturer article number: 6733837 Designs / special features Triangular plate Double-sided chipbreaker Cylindrical hole ISO-standard form for holder compatibility Optimised for turning and cast-iron machining System components: insert, external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert intended for? The TNMG160404 T515 insert is intended primarily for machining cast iron; the CVD-coated carbide T515 grade is optimised for stable chip control and economical performance in such materials. How many usable edges does the insert provide? The triangular geometry supplies three usable cutting edges per insert; the double-sided design allows indexing for extended service life. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and matching size/thickness; use ISO-compatible external holders or boring bars specified for TNMG160404 dimensions. What is the corner radius and how does it affect cutting? The corner radius is 0.4 mm, which provides a balance between edge strength and surface finish—suitable for general turning and interrupted cuts where a modest radius improves robustness. Is the insert coated and what benefits does the coating provide? Yes, the insert features a CVD-coated carbide grade (T515), offering improved wear resistance at higher cutting speeds and enhanced edge life in cast-iron applications. Can this insert be used for internal and external turning? Yes, the plate is suited for both external and internal turning operations provided the correct holder and setup are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T515, a precise 0.4 mm corner radius and a double-sided chipbreaker for efficient, economical cast iron turning; order the inserts directly via Metav Werkzeuge or request application advice from our consultants. TNMG 160404 T515 TNMG indexable insert for Turning by Tungaloy — CVD-coated carbide, R0.4 The TNMG160404 Tungaloy insert is an ISO-conform triangular indexable insert designed for turning, optimised for economical machining of cast iron with controlled chip formation and reliable cutting edge performance. CVD-coated carbide grade T515 For economical cast iron machining Triangular TNMG 160404, 0.4 mm radius Double-sided chipbreaker, with cylindrical hole High productivity through targeted chip control and coating benefits The CVD-coated carbide grade T515 provides a balanced combination of wear resistance and toughness, enabling longer tool life under interrupted cuts and variable stability. With a double-sided chipbreaker and a cylindrical hole for secure clamping, the insert supports consistent chip formation and evacuation, reducing downtime for chip clearing. For production environments dealing primarily with cast iron, this configuration reduces tool changes and improves throughput while maintaining predictable surface integrity. Mechanical compatibility and secure clamping for robust turning Compatibility with holders depends on form, free angle, tolerance class, clamping method, size and thickness; the TNMG 160404 follows ISO dimensions to ensure straightforward pairing with standard external holders or boring bars. The 0° free rake and the 60° cutting angle deliver a favourable balance between cutting forces and edge strength, while the 0.4 mm corner radius offers a compromise between edge durability and surface finish. Clear specification of these parameters simplifies setup and shortens machine idle time. Economic edge: why this Tungaloy grade suits everyday production Selecting the T515 grade targets cost-effective machining of cast iron: optimised chip control and CVD surface protection enhance tool life without requiring premium tool management efforts. The triangular plate shape permits multiple indexings, lowering consumable cost per component. In practical terms, the result is improved machining stability, fewer interruptions for insert changes and a more reliable process window for medium- to high-volume turning operations. For reliable application guidance or to secure delivery of Tungaloy TNMG inserts, contact Metav Werkzeuge for technical consultation and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6733834 SKU: 6733834-Tungaloy Manufacturer SKU: TUN6733834 ISO designation: 160404 Model series: ISO-Drehwendeschneidplatten Core specifications Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Free rake angle: 0° With hole: yes (cylindrical hole) Features and applications Material: carbide (cemented carbide) Grade / coating: T515, CVD-coated Plate form: triangular (TNMG) Chipbreaker: double-sided Intended application: turning Typical use: economical machining of cast iron FAQ What materials is this insert optimised for? The Tungaloy TNMG160404 T515 is optimised for economical machining of cast iron; the CVD-coated T515 grade is tuned for stable chip formation and extended edge life on grey and compacted graphite cast irons. How is the insert secured in the holder? The insert features a cylindrical hole and conforms to ISO dimensions, so it is clamped using the appropriate insert seat, clamp and screw system for TNMG-type external holders or boring bars. What cutting geometry does the insert offer and what does that mean for surface finish? With a 60° cutting angle, a 0° free rake and a 0.4 mm corner radius, the insert balances edge strength and achievable surface quality; the geometry supports robust turning while delivering acceptable finishes for many cast iron components. Can this insert be indexed multiple times? Yes, the triangular TNMG form provides multiple index positions, which reduces the cost per cutting edge and is advantageous in batch production where predictable edge changes are required. Is the TNMG160404 compatible with standard ISO holders? The plate follows ISO dimensions (160404) but compatibility depends on holder form, tolerance class, clamping type and size; verify holder matching before fitting to ensure correct seating and torque. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com