TNMG 160404 T515 Wendeplatten - Tungaloy
Take advantage of an ISO-standard, triangular indexable insert that combines CVD-coated carbide for economical cast iron machining with a 0.4 mm corner radius for controlled chip formation and reproducible surface finish — order directly via Metav Werkzeuge or consult our technical team for application advice. TNMG 160404 T515 Turning insert by Tungaloy — CVD-coated carbide for cast iron The TNMG160404 T515 is an ISO-standard triangular turning insert designed for efficient external and internal turning of cast iron, offering stable chip control and reliable performance in interrupted and continuous cuts. TNMG triangular ISO turning insert T515 CVD-coated carbide for cast iron machining 0.4 mm corner radius for controlled cutting Double-sided chipbreaker, cylindrical hole Consistent chip control that boosts process stability The insert’s CVD-coated carbide substrate and double-sided chipbreaker are engineered to promote consistent chip formation when machining cast iron, reducing the risk of workpiece damage and tool vibration. This technical combination results in improved surface finish and fewer unplanned tool changes, which contributes to higher overall productivity. The triangular geometry delivers multiple usable cutting edges, making the solution particularly economical for batch production and general turning tasks. Precise geometry for reproducible results With a defined 0.4 mm corner radius and 4.76 mm thickness, the insert provides predictable cutting behaviour under varying feed rates and depths of cut. The cylindrical hole and ISO form ensure compatibility with a wide range of ISO carriers and boring bars, simplifying tool inventory and set-up. These dimensional characteristics translate into reproducible part quality across shifts and operators, reducing scrap rates and setup verifications. Application-focused design for everyday turning Specified for turning operations, the insert’s triangular shape and 60° geometry enable efficient material removal in external and internal turning; the 0° clearance angle suits many standard toolholder designs. The grade is selected for economical machining of cast iron, balancing wear resistance and toughness for interrupted cuts and moderate cutting speeds. For workshops seeking predictable machining cycles, this insert offers a practical compromise between cost per edge and consistent tool life. Integration and handling guidance for seamless use The insert fits ISO-standard tool systems; selection of holder form, tolerance class and clamping method determines final compatibility. For best results, combine the insert with a rigid holder, appropriate clamping seat and correct screw torque. Where vibration or chatter is present, reducing overhang and selecting a more positive chipbreaker geometry will enhance stability. For specific process windows, Metav Werkzeuge can provide cutting data suggestions based on workpiece material and machine capability. Contact Metav Werkzeuge for tailored application advice or to order the TNMG160404 T515 turning insert by Tungaloy — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6747819 Manufacturer SKU: TUN6747819 SKU: 6747819-Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Insert designation: TNMG160404 ISO code: 160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Features / Applications Material: carbide Coating: CVD-coated carbide (T515) Application: turning (external and internal) Recommended for: cast iron machining Chipbreaker: double-sided Hole: with hole, cylindrical hole Shape: triangular Typical system: ISO turning insert, holder and clamping set FAQ What materials is this insert best suited for? The TNMG160404 T515 is formulated for economical machining of cast iron, using a CVD-coated carbide grade to balance wear resistance and toughness in standard turning operations. Is the insert compatible with standard ISO toolholders? Yes. The TNMG160404 follows ISO geometry and fits ISO-compatible external holders and boring bars; holder form, clearance and clamping must match the insert’s dimensions. How many cutting edges are available per insert? The triangular shape provides multiple usable edges; the precise count depends on the insert orientation and whether both sides of the chipbreaker are employed. What advantages does the CVD coating deliver? The CVD-coated carbide offers improved wear resistance and thermal stability during cutting, which supports longer edge life and consistent performance when machining cast iron. Can this insert handle interrupted cuts? The T515 grade and robust chipbreaker design are suited to interrupted cutting conditions typical in turning, offering stable performance under moderate interruptions. How should the insert be clamped? Use a compatible ISO holder with appropriate clamping seat and torque; the cylindrical hole supports secure fastening and precise positioning in most standard clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise 60° geometry and economical double-sided use to maintain steady production in turning operations; order directly via Metav Werkzeuge or consult our team for tailored application advice. TNMG 160404 T6215 Turning Insert – Tungaloy, CVD-coated carbide for rostfreier Stahl TNMG160404 is a triangular, ISO‑standard turning insert designed for external and internal turning under stable to lightly interrupted conditions, optimised for machining rostfreier Stahl. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl machining Double-sided chipbreaker, triangular form 60° geometry, 0.4 mm corner radius High wear resistance for consistent stainless‑steel turning The T6215 grade uses a CVD-coated carbide substrate developed to resist abrasive and adhesive wear during the machining of rostfreier Stahl under stable to slightly interrupted cuts. This coating improves edge life and reduces the frequency of index changes, delivering a tangible increase in uptime. By favouring a wear‑resistant surface treatment over uncoated grades, the insert helps to maintain surface integrity and repeatable part quality while avoiding premature flank or crater wear. Predictable cutting behaviour through precise geometry and clamping A 60° triangular shape with a 0.4 mm corner radius and plate thickness 4.76 mm provides a reliable compromise between strength and small‑radius form turning. The insert’s cylindrical hole and defined clearance parameters mean compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness — all standard considerations in an ISO system. Using a correctly matched external holder, shim and clamping set ensures repeatable seat contact and consistent cutting forces for predictable tool life. Productivity gains from chip control and economical indexing The double‑sided chipbreaker design offers two cutting edges per index, improving cost efficiency and reducing tool inventory. The chipbreaker is tuned to manage chips when machining rostfreier Stahl, helping to avoid built‑up edge and to support stable cutting conditions; this leads to improved surface finish and process stability. Integrating this insert into a coherent tool system — matching holder rigidity and machining parameters to the grade and chipbreaker — delivers reliable, repeatable performance and lower overall machining costs. For demanding turning tasks on rostfreier Stahl, choose the Tungaloy T6215 grade; contact Metav Werkzeuge for detailed application support and fast procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944839 SKU: 6944839-Tungaloy Manufacturer SKU: TUN6944839 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Designation: TNMG160404 Plate size: 16 Plate thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 60° Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Material: carbide Coating: CVD Grade: T6215 Application: Turning Suited for: rostfreier Stahl Plate form: triangular System components: compatible holder, shim/clamping set and replacement screws FAQ What materials is this insert designed for? The Tungaloy TNMG160404 in grade T6215 is optimised for machining rostfreier Stahl under stable to lightly interrupted cutting conditions. How many cutting edges are available per insert? Each triangular insert is double‑sided, providing two usable cutting edges per index to improve economy and reduce tool changes. Which holder features must match the insert? Compatibility requires matching holder form, clearance angle, tolerance class, fixing method, size and thickness to ensure correct seating and clamping of the TNMG160404 insert. What are the key geometric identifiers to check before fitting? Confirm the 60° triangle form, 0.4 mm corner radius and 4.76 mm thickness, together with the cylindrical hole style, to guarantee correct fit and performance. Can this insert be used for interrupted cuts? The T6215 grade is primarily aimed at stable to slightly interrupted conditions; for heavy interruptions a different geometry or grade may be advisable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, CVD‑coated carbide grade combined with the proven TNMG 160404 geometry for consistent turning of stainless steel; the triangular, double‑sided design offers cost‑effective indexing and stable chip control in steady to lightly interrupted cuts — order the insert via Metav Werkzeuge or consult our technical team for compatibility with holders and clamping systems. TNMG 160404 T6215 indexable insert for turning by Tungaloy TNMG 160404 T6215 is an ISO‑standard triangular indexable insert designed for general turning applications, optimised for stainless steel under stable to lightly interrupted cutting conditions. CVD‑coated carbide for stainless steel ISO TNMG 160404 geometry, 60° included angle Double‑sided chipbreaker, reversible use Cylindrical hole for secure clamping Consistent performance where material demands matter The TNMG series geometry delivers a reliable balance between strength and accessibility: the 60° triangle and 0.4 mm nose radius provide decisive edge strength without sacrificing form for finishing passes. The CVD‑coated carbide grade T6215 is formulated to resist flank wear and abrasion when machining stainless steel, which often work‑hardens or generates sticky chips. By combining a robust substrate with a wear‑resistant coating, the insert maintains cutting stability and extends interval lengths between indexings, supporting higher uptime and predictable tool costs. Predictable clamping and quick indexability for efficient turning A triangular, double‑sided insert means two usable edges per side, multiplying available cutting edges and improving economy per index. The cylindrical hole and standard ISO fixing ensure compatibility with a broad range of external toolholders; the insert thickness (4.76 mm) and standard TNMG 160404 footprint match common carrier bores and clamping devices. Clear geometric specifications — 0° relief angle, 60° included angle, 16 mm inscribed circle — simplify holder selection and enable repeatable seating, which reduces set‑up time and minimises vibration for enhanced surface finish. Effective chip control and process security in turning stainless steel Chip management is central when machining stainless steel; the double‑sided chipbreaker profile stabilises chip formation and evacuation under typical turning feeds. This reduces the risk of built‑up edge and improves thermal stability at the cutting zone, delivering a steadier cutting resistance and more consistent part quality. For applications requiring high process security and surface integrity, the T6215 grade offers a resilient coating that supports extended tool life while preserving dimensional accuracy in serial production. Contact Metav Werkzeuge for tailored holder compatibility and ordering advice on Tungaloy TNMG 160404 T6215 inserts; our technical consultants can confirm optimal chipbreaker and grade selection for the intended stainless steel application and machine conditions. Technical data Article number: 6944843-Tungaloy Manufacturer article number: 6944843 SKU (manufacturer): TUN6944843 Manufacturer: Tungaloy Dimensions / Core data ISO designation: TNMG160404 Inscribed circle: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features / Material & functions Material: carbide (hardmetal) Coating: CVD‑coated (T6215) Shape: triangular, double‑sided Chipbreaker: double‑sided chipbreaker Hole: with cylindrical hole Application: turning (external and internal) Series: ISO turning indexable inserts FAQ What materials is this insert suited for? The TNMG 160404 T6215 indexable insert is specifically formulated for machining stainless steel; the CVD‑coated carbide grade T6215 enhances wear resistance and chip control when turning such materials. How many cutting edges are available per insert? With a triangular, double‑sided design the insert provides multiple usable cutting edges; the reversible chipbreaker doubles the available edges for economical indexing of the TNMG 160404 Tungaloy insert (SKU 6944843‑Tungaloy). Which holder types are compatible with this geometry? Compatibility is determined by the TNMG160404 form, thickness (4.76 mm), hole style (cylindrical) and 60° geometry; the insert fits ISO‑standard external holders designed for TNMG inserts when the clamping and tolerances match. Can the T6215 grade be used for interrupted cutting? The T6215 CVD grade is intended for stable to lightly interrupted conditions on stainless steel; for heavy interruptions, a tougher substrate or different chipbreaker may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade for wear resistance, combined with a 0.4 mm nose radius and ISO compatibility to keep turning operations consistent and productive; order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. TNMG160404 T6215 – ISO triangular indexable insert, CVD-coated carbide (Tungaloy) The TNMG160404 T6215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for stainless steel applications under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 0.4 mm nose radius for fine finishing 60° triangular geometry for versatile use Suitable for stainless steel turning Longer tool life and consistent surface quality The combination of a CVD-coated hard-wearing surface and a carbide substrate delivers reliable resistance to abrasive wear and edge chipping. This turning insert is engineered to maintain cutting edge integrity during long cycles, which translates into fewer indexings and less frequent tool changes. The coating reduces adhesion and thermal wear, helping to preserve dimensional accuracy and surface finish in serial production. For customers aiming to reduce downtime and increase process repeatability, this insert supports a more predictable machining window. Precision seating and straightforward system integration Produced to ISO dimensions, the insert’s geometry and tolerances support rapid integration into standard turning holders. Key compatibility factors are the insert form, 0° relief, tolerance class, fastening method, size and thickness. The TNMG shape with a 60° included angle offers an excellent balance of strength and access, while the 0.4 mm nose radius permits fine surface finishes without excessive cutting forces. The item is delivered for use with a matching external holder or boring bar, plus the appropriate shim/clamping set and replacement screws, ensuring a secure fit and consistent contact pressure for repeatable results. Chip control and application guidance for stable cuts This grade is intended for stable or lightly interrupted turning; selecting the correct chipbreaker and application parameters is crucial. The insert features a double-sided chipbreaker design that can be flipped to extend service life, and it performs best when combined with a holder and setup that limit vibration. For heavier interrupted cuts or unstable setups, a more robust grade or a different chip control geometry is recommended. When machining stainless steels, lower cutting speeds and moderate feeds often yield the best balance between tool life and surface quality; the insert’s construction helps maintain stable chip formation and reduces built-up edge tendency. For precise tool-to-holder matching and application advice for this Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and rapid supply. Technical Data Manufacturer article number: 6944889 SKU: 6944889-Tungaloy Manufacturer SKU: TUN6944889 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Name: TNMG160404 T6215 Tungaloy-Wendeplatte Core data Angle: 60° Size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief/clearance angle: 0° ISO designation: 160404 Special features Triangular plate With hole: cylindrical hole Double-sided chipbreaker CVD-coated carbide, grade T6215 Suitable for external and internal turning Compatible with standard holders, shim and clamping sets Intended for stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert best suited for? The TNMG160404 T6215 insert is optimised for stainless steel applications and performs best under stable or slightly interrupted turning conditions. How is the insert mounted in a holder? The insert features a cylindrical hole for secure mounting; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness of the holder system. Can the insert be used on both external and internal turning operations? Yes, the ISO triangular format and the TNMG geometry make the insert suitable for both external and internal turning when paired with the correct holder. What does the T6215 designation indicate? T6215 denotes a CVD-coated carbide grade engineered for wear resistance and consistent cutting performance in stainless steel turning. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius offers a good compromise between surface finish quality and edge strength, producing fine finishes without excessive cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for reliable rostfreier Stahl turning and proven compatibility with ISO holders; the insert’s double-sided chipbreaker and 0.4 mm corner radius deliver a balance of edge strength and surface finish. Order the TNMG160404 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404 T6215 ISO turning insert by Tungaloy The TNMG160404 T6215 is a triangular ISO turning insert intended for external and internal turning, engineered for rostfreier Stahl under stable to lightly interrupted conditions. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl machining Double-sided chipbreaker for tool life economy ISO TNMG 160404 triangular format Reliable cutting performance for rostfreier Stahl applications The T6215 grade combines a CVD-coated surface with a robust carbide substrate to resist abrasive and adhesive wear when machining rostfreier Stahl. This coating improves thermal stability and oxidation resistance at the cutting edge, which contributes to more consistent tool life under continuous turning. The result is fewer tool changes and steadier process output, making the insert a cost-effective choice where repeatability and uptime matter. The CVD finish also supports a controlled contact zone between workpiece and tool, aiding surface quality without sacrificing edge strength. Secure fit and ISO compatibility for predictable production As an ISO-format insert, the TNMG form ensures straightforward compatibility with standard external holders and boring bars when matching is done by shape, clearance, tolerance class, fastening, size and thickness. The TNMG160404 geometry with 0° clearance and a cylindrical hole provides reliable seating and repeatable concentricity in the clamp or screw system. A plate thickness of 4.76 mm and the triangular outline allow indexing of multiple cutting edges, reducing tooling cost per part and simplifying inventory management. For stable clamping and consistent repeatability, the recommended system comprises the ISO insert, a suitable external holder or bar, an underlay/clamp set and replacement screws. Productivity advantages and application guidance The double-sided chipbreaker design permits indexable use on both faces, halving consumable cost per usable edge and improving process economics. The 0.4 mm corner radius offers a compromise between edge strength and surface finish, suitable for many finishing and light-medium turning passes on rostfreier Stahl. Select the chipbreaker and grade to match the workpiece material, cutting mode and machine stability; the serrated or continuous nature of a chipformer will influence chip control and surface integrity. This insert is optimised for stable to lightly interrupted cuts—heavy interruptions require different edge preparations—so planners should align fixture rigidity and cutting parameters to maintain expected tool life and dimensional control. Request original Tungaloy TNMG160404 T6215 inserts from Metav Werkzeuge for machinability and process reliability on rostfreier Stahl parts — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast delivery Technical data Article number: 6944815 Manufacturer SKU: TUN6944815 Label: TNMG160404 T6215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 16 Special features Material: Hartmetall (carbide) Coating: CVD-coated Geometry: triangular, TNMG160404 Hole: with cylindrical hole Chipformer: double-sided chipbreaker Typical use: external and internal turning of rostfreier Stahl System components: ISO insert, matching holder/boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suitable for? The TNMG160404 T6215 is formulated primarily for machining rostfreier Stahl, offering abrasion and oxidation resistance suited to that material family. Is the insert indexable and reversible? Yes; the triangular TNMG form with a double-sided chipbreaker is indexable, providing multiple usable edges to reduce cost per cutting edge. Which insert features support secure clamping? The cylindrical hole, standard TNMG geometry and 0° clearance ensure stable seating in ISO-compatible holders and repeatable positioning when used with the recommended clamping set. When should a different grade or chipbreaker be chosen? For heavily interrupted cuts, very abrasive workpiece conditions, or when higher feed rates are required, an alternative grade or a different chipformer should be selected to preserve edge life and part quality. Is this an original Tungaloy product and what is the SKU? This is an original Tungaloy indexable insert, article number 6944815 and manufacturer SKU TUN6944815, supplied as a brand-new factory item. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Benefit from a wear-resistant CVD-coated carbide grade and precise TNMG geometry for consistent turning of rostfreier Stahl; the combination of long tool life, stable chip control and easy insert indexing supports steady production. Order the TNMG160404 T6215 insert directly via Metav Werkzeuge or consult the team for application advice. TNMG160404 T6215 ISO turning insert — CVD-coated carbide by Tungaloy TNMG160404 T6215 is an ISO triangular turning insert designed for external and internal turning, optimised for rostfreier Stahl under stable to lightly interrupted conditions CVD-coated carbide T6215 for rostfreier Stahl ISO TNMG 160404 triangular insert 0.4 mm corner radius for precise chamfers Double-sided chipbreaker with cylindrical hole Consistent wear resistance and surface quality for rostfreier Stahl The CVD-coated carbide grade T6215 delivers enhanced resistance to abrasion and thermal softening, which is particularly beneficial when machining rostfreier Stahl. The applied coating reduces flank wear and helps maintain a consistent cutting edge over longer cycles, translating into fewer indexings and reduced downtime. For production environments that prioritise repeatable part quality, the combination of coating and carbide substrate supports a reliable surface finish and steady dimensional results. Geometry and mechanical stability that reduce process variability The insert’s triangular geometry and 60° included angle provide a stable cutting platform for a range of turning operations. With a 0.4 mm corner radius and a thickness of 4.76 mm, the design balances edge strength and small-radius capability, enabling controlled chamfering and fine radii. The double-sided chipbreaker and the central cylindrical hole simplify clamping in ISO holders and promote predictable chip formation, lowering the risk of built-up edge and enabling consistent cycle times. System compatibility and straightforward integration into toolholders The ISO designation ensures compatibility within standard turning systems, but mechanical match is determined by form, relief angle, tolerance class, attachment, size and thickness. The insert is intended to work within a system comprising an ISO turning insert, a matching external holder or boring bar, plus an underlay/clamping kit and replacement screws. Selecting the correct chipbreaker and grade according to workpiece stability and machining strategy results in improved tool life and process security. Productivity gains and operational benefits Optimised for stable to slightly interrupted cuts, the insert’s properties encourage efficient material removal and stable chip control, which can reduce cycle times and tool consumption in serial production. The Tungaloy grade focuses on economical machining by providing durable performance and predictable wear behaviour, thereby supporting higher uptime and lower handling frequency. In short-run or high-volume settings, these characteristics contribute directly to throughput and cost-effectiveness. For reliable turning of rostfreier Stahl with Tungaloy precision, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6944832 Manufacturer SKU: TUN6944832 SKU: 6944832-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TNMG160404 T6215 Tungaloy-Wendeplatte Data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide grade T6215 Material: Hartmetall Double-sided chipbreaker Triangular plate form ISO TNMG 160404 designation Intended application: Drehen (external and internal turning) Compatibility determined by form, relief angle, tolerance, attachment, size and thickness FAQ What materials is this insert suited for? This TNMG160404 T6215 insert is formulated for machining rostfreier Stahl; the CVD-coated carbide provides wear resistance suitable for stable to lightly interrupted cutting conditions. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker allows indexing to the opposite side, extending usable edges and improving overall economy when using the TNMG160404 T6215 insert. Is the insert compatible with standard ISO holders? The insert follows ISO TNMG dimensions, but compatibility depends on holder form, relief angle, tolerance class, attachment and thickness; the insert fits conventional ISO external holders and boring bars when these parameters match. What advantages does the T6215 grade provide in production? Grade T6215 emphasises abrasion resistance and thermal stability, supporting consistent cutting performance and reduced flank wear during extended production runs. What geometric data are most relevant when selecting a holder? Key parameters are the 16 mm size, 4.76 mm thickness, 0.4 mm corner radius and the 0° relief angle; holders must accommodate the central cylindrical hole and the triangular plate form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for stainless steel, a compact 60° geometry and a 0.4 mm corner radius to achieve stable, repeatable turning results with low wear; order directly via Metav Werkzeuge or ask their consultants for application-specific advice. TNMG 160404 T6215 indexable turning insert — CVD-coated carbide, for turning TNMG160404 T6215 is an ISO‑standard indexable turning insert engineered for external and internal turning of stainless steels under stable to mildly interrupted cutting conditions ISO triangular insert TNMG160404, 60° geometry CVD-coated carbide grade T6215 for stainless steel Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 4.76 mm plate thickness Consistent wear resistance for stainless‑steel machining The insert uses a CVD-coated carbide substrate optimised as grade T6215, offering stable wear behaviour when turning stainless steel. This delivers a longer effective tool life under continuous production compared with uncoated grades, reducing changeover frequency and contributing to predictable process costs. The coating improves resistance to workpiece adhesion and abrasive wear, helping maintain cutting edge integrity and consistent dimensional results over extended runs. Improved chip control and process stability A double-sided chipbreaker combined with the 60° triangular form provides controlled chip formation and secure seating in compatible holders. The integrated cylindrical hole ensures repeatable clamping and quick indexation, while the 0.4 mm corner radius balances edge strength with acceptable surface finish. These design choices reduce vibration and help sustain stable cutting forces, which benefits throughput and surface quality when facing common challenges in turning stainless materials. System compatibility and application guidance for reliable integration As an ISO turning insert, compatibility with the clamping system depends on form, clearance angle, tolerance class, fastening method, size and thickness; the listed dimensions (16 mm size, 4.76 mm thickness) match many standard external holders and boring bars. Select the chipbreaker and grade according to workpiece material and machining stability: the T6215 variety is intended for stable to lightly interrupted operations on stainless grades. For less rigid set‑ups or heavy interruptions, consider a different chipformer or toolholding strategy to preserve edge life and process reliability. For practical selection assistance and availability of Tungaloy T6215 inserts, contact Metav Werkzeuge to discuss holder compatibility and optimal chipformer choice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876165 Manufacturer SKU: TUN6876165 Brand article number: 6876165 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Geometry code: 160404 Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Designs / Special features Material: carbide Coating: CVD Grade: T6215 Plate form: triangular Chipbreaker: double‑sided Hole: with cylindrical hole Clearance angle: 0° Application: turning, suitable for stainless steel, stable to lightly interrupted cuts FAQ What materials is this insert intended for? The TNMG160404 T6215 insert is specified for machining stainless steel under stable to slightly interrupted turning conditions. How does the T6215 grade affect tool life? The T6215 CVD coating improves wear resistance and reduces adhesion when turning stainless steels, resulting in more consistent edge life and fewer unscheduled indexings. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions (TNMG160404); compatibility with a holder depends on form, clearance angle, tolerance class, fastening and size — the cylindrical hole and 60° geometry suit many standard holders. Can the corner radius be changed? This article is supplied with a 0.4 mm corner radius; for different radii, select the corresponding ISO designation or alternate indexable insert suited to the required surface finish and edge strength. What are the benefits of a double‑sided chipbreaker? A double‑sided chipbreaker extends usable edges per insert and offers a balance between chip control and cost efficiency for batch production and serial turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise 0.4 mm nose geometry, and ISO compatibility for consistent turning performance; order directly via Metav Werkzeuge or ask our consultants for application-specific guidance. TNMG 160404 T6215 indexable insert for turning — Tungaloy A TNMG160404 T6215 Tungaloy indexable insert engineered for ISO-standard external and internal turning, optimised for rostfreier Stahl in stable to mildly interrupted conditions CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Triangular 16 mm plate with 0.4 mm radius Double-sided chipbreaker, cylindrical hole Robust wear resistance for longer production runs The CVD-coated carbide T6215 grade delivers high wear resistance, specifically developed for machining rostfreier Stahl under stable or slightly interrupted cutting conditions. The chemical vapour deposition layer reduces flank wear and supports a consistent surface finish, which in turn lowers the frequency of insert changes and interruptions to production. For operations seeking improved uptime and predictable tool life, the coating and carbide substrate together form a cost-effective solution that balances performance and longevity. Precise geometry and secure fit for reliable cuts Designed as an ISO-standard triangular insert, the 16 mm plate with a 0.4 mm nose radius and a nominal 60° geometry provides a balance between strength and detail in the cutting edge. The insert’s cylindrical hole and defined thickness (4.76 mm) ensure compatibility with matching toolholders when form, relief angle, tolerance class, fastening and size are respected. Clear guidance on holder selection reduces setup time and ensures a secure clamping arrangement, which is essential for maintaining dimensional accuracy and repeatable machining results. Economical indexing and easy system integration The double-sided chipbreaker design allows the insert to be indexed for extended usable life, improving cost-efficiency in batch production. As an ISO insert, it integrates into standard systems comprising the insert, a suitable external holder or boring bar, shims/clamping sets and replacement screws. Choosing the correct chipbreaker and grade for the workpiece material and machining stability minimises burr formation and enhances productivity, supporting both high-volume turning and precision finishing operations. For application advice or to secure supply of the Tungaloy TNMG160404 T6215 indexable insert, contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6877404 Manufacturer SKU: TUN6877404 Model series: ISO turning indexable inserts Material: carbide Facts Plate size: 16 mm Nose radius: 0.4 mm Plate thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Special features CVD-coated carbide grade T6215 Triangular plate, ISO designation TNMG160404 Double-sided chipbreaker Cylindrical hole for secure clamping Intended application: turning (external and internal) FAQ What materials is this insert recommended for? The TNMG160404 T6215 insert by Tungaloy is recommended for rostfreier Stahl and similar alloys, where the CVD-coated carbide grade provides improved wear resistance and consistent finish. How does the chipbreaker affect performance? The double-sided chipbreaker on this indexable turning insert helps control chip form and evacuation during cutting, improving process stability and extending the effective life of the insert. Is the insert compatible with standard ISO holders? Yes, the TNMG160404 follows ISO geometry; compatibility with a specific holder depends on form, relief angle, tolerance class, fastening and size — ensure the holder matches the insert's 16 mm plate size and hole style. What are the key geometry specifications to check before purchase? Confirm the 16 mm plate size, 4.76 mm thickness, 0.4 mm nose radius and the cylindrical hole style; these dimensions determine clamping, stiffness and suitability for the intended turning task. Can this insert be used for interrupted cuts? The T6215 grade is designed for stable to mildly interrupted conditions; for heavy interruptions, consider assessment of cutting parameters and stability of the chosen holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for stainless steel turning, combined with a compact 60° triangular geometry and a precise 0.4 mm nose radius for consistent finishing. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 160404 T6215 TNMG Turning Insert — Tungaloy, CVD-coated carbide, 0.4 mm nose radius The TNMG160404 T6215 is an ISO triangular indexable insert designed for external and internal turning, optimised for machining stainless steels under stable to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 Triangular ISO TNMG form, 60° cutting angle 0.4 mm nose radius for precise finishing Double-sided chipbreaker, cylindrical hole Precision finishing with controlled cutting geometry The triangular ISO format with a 60° cutting angle delivers a predictable cutting line and repeatable results. The 0.4 mm nose radius balances edge strength with surface quality, enabling fine finishes without sacrificing stability. For users focused on consistent part tolerances, the compact nose radius reduces deflection risk in light to medium cuts while the triangular shape ensures multiple usable cutting edges for economical tool usage. The combination of geometry and edge preparation supports reliable dimensional control and process repeatability. Durable CVD-coated carbide for stainless steel machining The CVD-coated carbide grade T6215 provides high wear resistance during the machining of stainless steels, where work hardening and adhesive tendencies can shorten tool life. The coating supports thermal and chemical stability at the cutting edge, reducing built-up edge and maintaining a stable cutting edge over extended cycles. In practice, this means longer consistent tool life, fewer interruptions for tool changes and a more predictable production rhythm for turned components. Compatibility and secure clamping for workshop flexibility The insert is delivered in the ISO TNMG160404 format with a cylindrical hole and standard thickness of 4.76 mm, facilitating use with a wide range of external holders and boring bars. Compatibility depends on matching the insert form, clearance angle, tolerance class, clamping method, size and thickness to the chosen holder. The double-sided design with a chipbreaker on each cutting side simplifies stocking and increases the number of available edges per insert, improving inventory efficiency and reducing tooling costs per component. Practical benefits for production-oriented turning In production environments, the insert’s wear-resistant grade and robust coating translate to fewer unplanned stops and improved throughput. The combination of CVD-coated carbide, stable geometry and the double-sided chipbreaker contributes to reliable chip control and consistent surface quality. For shops aiming to raise productivity without extensive process rework, this insert supports a pragmatic balance of durability and finishing capability, particularly when machining demanding alloys like stainless steels. For reliable stainless steel turning, choose the Tungaloy TNMG160404 T6215 insert and contact Metav Werkzeuge for tailored advice and prompt supply. Technical Data Article number: 6876104 Manufacturer SKU: TUN6876104 SKU: 6876104-Tungaloy Model series: ISO turning indexable inserts Material: carbide Coating / Grade: T6215 Facts Nose radius: 0.4 mm Thickness: 4.76 mm Plate size: 16 mm Cutting angle: 60° Hole: cylindrical Special features Triangular TNMG160404 ISO format Double-sided chipbreaker CVD-coated carbide grade T6215 Suitable for external and internal turning Compatibility depends on holder form, clearance and clamping FAQ What materials is this insert suitable for? The TNMG160404 T6215 insert is designed primarily for stainless steels, with the CVD-coated carbide grade offering wear resistance suitable for stable to mildly interrupted turning conditions. Can this insert be used for internal as well as external turning? Yes. The ISO TNMG160404 format and cylindrical hole enable use in both external holders and appropriate boring bars for internal turning operations. What does the designation TNMG160404 T6215 indicate? TNMG identifies the triangular ISO insert form; 160404 denotes the ISO size and geometry; T6215 is the CVD-coated carbide grade optimised for stainless steels. How does the 0.4 mm nose radius affect machining results? A 0.4 mm nose radius provides a compromise between surface finish and edge strength, supporting finer finishes while maintaining stability in light to medium cuts. How to ensure a suitable holder match for this insert? Select a holder that matches the insert’s form, clearance angle (0° relief as specified for the geometry), tolerance class, clamping method, size and thickness to ensure safe and accurate mounting of the TNMG160404 T6215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a durable, CVD-coated carbide grade and a compact triangular geometry to maintain steady productivity when machining rostfreier Stahl; compatibility with standard ISO holders and a 0.4 mm corner radius ensure reliable edge life and process stability. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 160404 T6215 — ISO triangular turning insert for rostfreier Stahl by Tungaloy The TNMG160404 T6215 is an ISO triangular turning insert optimised for external and internal turning of rostfreier Stahl under stable to mildly interrupted cutting conditions CVD-coated carbide T6215 Optimised for rostfreier Stahl turning 0.4 mm corner radius for edge strength Triangular 16 mm ISO insert, 60° cutting angle Reliable edge life for rostfreier Stahl turning The CVD-coated carbide grade T6215 is designed to resist adhesive and abrasive wear commonly encountered when machining rostfreier Stahl. The coating reduces built-up edge and maintains cutting performance across extended tool life, which translates to fewer insert changes and steadier production cycles. Its wear resistance also contributes to predictable reconditioning intervals and stable dimension control, improving overall machining economics. ISO conformity and secure clamping reduce process interruptions Compatibility with ISO-standard toolholders is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; this insert features a cylindrical hole for robust mounting and a 0° relief angle that supports repeatable seating. The standardised geometry simplifies holder selection and replacement logistics, thereby lowering setup time and the risk of improper seating that can cause vibrations or edge chipping during turning operations. Geometry that protects the cutting edge and improves surface finish A 0.4 mm corner radius combined with a triangular plate shape and 60° cutting angle offers an effective balance between edge strength and cutting efficiency. The moderate radius increases robustness on interrupted cuts while still enabling good surface quality on the workpiece. The double-sided chipbreaker design provides two usable edges per side, extending effective insert life and offering cost-efficient tool usage without compromising part finish. Practical use cases and machining guidance Intended primarily for Turning, the insert performs well in external and internal operations on rostfreier Stahl where process stability is present. For optimal results, match the chipbreaker and grade to the specific stainless alloy, cutting speed and depth of cut; the insert excels under steady cuts but can tolerate light interruptions. When selecting tooling, ensure the holder tolerances and clamping system correspond to the insert dimensions to preserve the predicted tool life and repeatability. For application advice or availability of the Tungaloy T6215 inserts, contact Metav Werkzeuge for expert consultation and immediate processing: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6876034-Tungaloy Manufacturer article number: 6876034 Manufacturer SKU: TUN6876034 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Special features Shape: triangular Grade/coating: T6215, CVD-coated carbide Application: Turning Mounting: with cylindrical hole Chipbreaker: double-sided Relief angle: 0° Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The TNMG160404 T6215 insert is primarily specified for machining rostfreier Stahl and is supplied as a CVD-coated carbide for improved wear resistance when turning stainless materials. How is the insert mounted in the toolholder? Mounting is via a cylindrical hole and standard clamping; compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness to ensure stable seating for the insert. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength for interrupted cuts and contributes to consistent surface finish while offering a compromise between robustness and cutting efficiency. Can the insert be used for internal turning as well as external turning? Yes, this ISO triangular insert is appropriate for both external and internal turning operations under stable to slightly interrupted machining conditions. How many cutting edges are available per insert? With a triangular shape and a double-sided chipbreaker, the insert provides multiple usable edges, improving cost-efficiency through extended edge usage. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide substrate and a triangular ISO geometry delivers reliable wear resistance and stable cutting when machining stainless steels; the 60° form and 0.4 mm corner radius ensure a balance of strength and finish. Order the insert via Metav Werkzeuge or consult their technical team for application-specific guidance. TNMG 160404 T6215 – Triangular turning insert (ISO) by Tungaloy The TNMG 160404 T6215 is an ISO‑standard triangular turning insert engineered for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning ISO TNMG 160404 triangular form Cylindrical hole with secure locating Consistent machining performance for stainless components The combination of CVD-coated carbide and the T6215 grade provides consistent tool life and predictable wear patterns when machining rostfreier Stahl. The 60° triangular geometry concentrates cutting forces efficiently, while the double-sided chipbreaker promotes controlled chip formation. As a result, processes run with improved stability and fewer unscheduled tool changes, which supports higher production throughput and lower overall machining costs. Coating and substrate explained for reliable tool life A CVD coating on a hardmetal substrate increases wear resistance and helps maintain a sharp cutting edge at elevated temperatures typical for stainless steel turning. This coating type resists abrasive wear and reduces built-up edge tendencies, making the insert suitable for continuous and slightly interrupted cuts. The combination of coating and substrate therefore translates into longer tool life and more consistent component quality. ISO compatibility and secure clamping for workshop convenience The insert follows ISO dimensions and is compatible with holders that match form, clearance, tolerance class, fastening method, size and thickness. The 0° clearance angle, cylindrical hole, and precise dimensions (inscribed circle 16 mm, thickness 4.76 mm) ensure secure seating and repeatable indexing. The standardisation simplifies inventory management: matching inserts, holders and clamping hardware form a clear system for fast replacement and minimal setup time. Practical advantages for surface finish and strength The 0.4 mm corner radius provides a compromise between edge strength and surface quality — suitable for finishing passes as well as more robust turning operations. The insert’s thickness of 4.76 mm contributes to rigidity, reducing vibration on longer overhangs and improving surface integrity. With its double-sided design, each insert offers two usable edges, supporting economical use in production environments where both consistency and availability matter. For application advice or to order Tungaloy TNMG 160404 T6215 inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — Metav Werkzeuge’s consultants provide guidance on holder compatibility and optimal cutting parameters Technical data Article number: 6875804 Manufacturer SKU: TUN6875804 SKU: 6875804-Tungaloy Designation: TNMG160404 Grade: T6215 Material: carbide Core technical data Corner radius: 0.4 mm Thickness: 4.76 mm Included angle: 60° Inscribed circle: 16 mm Clearance angle: 0° Hole: cylindrical, with hole Special features CVD-coated carbide Double-sided chipbreaker ISO-standard triangular insert Suited for turning stainless steel For stable to slightly interrupted cuts FAQ What materials is this insert suitable for? The Tungaloy TNMG 160404 T6215 insert is designed primarily for rostfreier Stahl (stainless steel) and performs well under stable to slightly interrupted cutting conditions. How does the T6215 grade affect machining? The T6215 CVD-coated grade improves wear resistance and edge stability, which helps to maintain consistent cutting performance and extend tool life during stainless steel turning. Is the TNMG 160404 compatible with standard ISO holders? Yes, the insert uses ISO TNMG dimensions; compatibility depends on matching the holder’s form, clearance, tolerance class, fastening and thickness to the insert specifications. What advantage does the 0.4 mm radius offer? A 0.4 mm corner radius offers a balance between cutting-edge strength and surface finish, suitable for a variety of turning tasks from light finishing to more robust passes. Can the insert be used for interrupted cuts? The T6215 grade and insert geometry are suited to stable to slightly interrupted cuts; heavy interruptions may require a different tool grade or cutting strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a proven CVD-coated carbide T6215 grade, precise ISO TNMG geometry and a secure cylindrical mounting for consistent turning performance in rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404 T6215 Tungaloy insert — CVD-coated carbide, 60° triangular for turning The TNMG160404 T6215 Tungaloy insert is an ISO-standard triangular turning insert designed for rostfreier Stahl machining under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO triangular TNMG geometry 60° Double-sided chipbreaker for versatile cuts Cylindrical hole — secure mounting Consistent chip control for reliable production The combination of a CVD coating and a wear-resistant carbide substrate delivers predictable tool life and stable cutting conditions when machining rostfreier Stahl. The T6215 grade is engineered for abrasive resistance and thermal stability, which reduces flank wear in medium-duty turning operations. With a double-sided chipbreaker, chip formation remains consistent even when feeds vary slightly, helping to avoid built-up edge and ensuring repeatable surface finishes. These traits translate into fewer tool changes and a steadier process flow on batch and single-piece production alike. ISO compatibility and secure clamping reduce setup time Designed to match ISO specifications, the triangular TNMG geometry with a 60° included angle and a cylindrical hole ensures compatibility with a wide range of external holders and boring bars. The insert’s 0° relief and 0.4 mm corner radius provide defined contact points in the seat, enabling fast, repeatable clamping and predictable run-out behaviour. Clear specification adherence simplifies inventory and tooling decisions, and the insert’s reversible, double-sided design halves the number of indexings required compared with single-sided solutions, helping to keep machine downtime to a minimum. Process stability that improves throughput and part quality Optimised for stable to lightly interrupted cuts, the insert supports consistent surface quality and dimensional control in turning operations. The robust edge preparation and the T6215 coating resist crater wear and edge chipping, which fosters longer intervals between regrinds or replacements. For manufacturing environments where cycle time and component integrity matter, this indexable geometry contributes to higher first-pass rates and reduced handling. The result is measurable efficiency gains and a more economical machining cycle without compromising precision. For application support, tooling recommendations or to secure stock of the TNMG160404 T6215 Tungaloy insert contact Metav Werkzeuge — advice and prompt delivery options are available via Metav Werkzeuge. Technical data Article number: 6944875-Tungaloy Manufacturer SKU: TUN6944875 Manufacturer item No.: 6944875 Numbers / Core technical data Corner radius: 0.4 mm Insert angle: 60° Size: 16 mm Relief angle: 0° Designs / Special features Carbide substrate (hardmetal) CVD coating, grade T6215 Triangular insert, ISO TNMG form Double-sided chipbreaker Cylindrical hole for secure mounting ISO-standard turning insert series Application: Turning of rostfreier Stahl FAQ What materials is this insert suitable for? The TNMG160404 T6215 Tungaloy insert is optimised for machining rostfreier Stahl under stable to lightly interrupted conditions, taking advantage of the T6215 CVD coating and carbide substrate. How is the insert secured in the holder? The insert features a cylindrical hole and ISO TNMG form that enable secure clamping in compatible external holders and boring bars for reproducible seating and low run-out. How many cutting edges are available per insert? The indexable TNMG geometry is double-sided, providing two usable cutting edges per side and therefore multiple indexings before replacement. Does the T6215 grade resist thermal wear? Yes. The CVD-coated T6215 grade is designed for thermal and abrasive resistance to reduce flank and crater wear during typical rostfreier Stahl turning tasks. Is this insert compatible with standard ISO toolholders? Yes. The insert conforms to ISO TNMG dimensions and is compatible with holders specified for TNMG160404 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide wear resistance combined with a double-sided chipbreaker for longer tool life and fewer insert changes; the ISO‑compliant geometry ensures straightforward integration into standard turning tool systems. Order the TNMG160404 T6215 turning insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. TNMG 160404 T6215 — Turning insert, CVD‑coated carbide, ISO‑compliant (Tungaloy) TNMG 160404 T6215 is an ISO‑standard triangular insert for precision turning of stainless steels under stable to slightly interrupted cutting conditions, designed for use with compatible external holders and boring bars. ISO-compliant triangular insert CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided chipbreaker, with hole Consistent wear resistance for stainless steel turning The insert combines a CVD-coated surface with a wear‑resistant carbide substrate to resist built‑up edge and abrasion when machining stainless steels. The selected grade delivers stable performance in continuous and slightly interrupted cuts, reducing the need for premature index changes. By choosing a cutting edge with a measured corner radius of 0.4 mm, operators gain a balance between edge strength and surface finish, while the robust coating helps maintain dimensional accuracy over longer runs. Straightforward system integration and predictable fit As an ISO insert, the geometry and fixing point are standardised to simplify matching with external holders or boring bars. Key dimensions such as the 60° insert angle, 0° clearance and a plate thickness of 4.76 mm support predictable seating and clamping. The presence of a cylindrical hole ensures secure fastening and repeatable positioning; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness to guarantee a reliable tool‑holder interface. Fewer interruptions, higher productivity The double‑sided design with an integrated chipbreaker effectively doubles available cutting edges before replacement, reducing downtime for index changes. The chip control geometry promotes consistent chip formation and evacuation when turning stainless steel, which translates into shorter cycle times and improved throughput. Using a grade optimised for these materials reduces the frequency of insert swaps, supporting a more efficient production flow. Practical selection and application advice This insert is tailored for general turning tasks on stainless workpieces where stable set‑ups or slightly interrupted conditions prevail. Select the chipbreaker variant and grade according to the workpiece alloy and machining stability: a sturdier edge and suitable feed will extend service life, while the modest corner radius supports good surface quality. When uncertainty persists about the correct holder or clamping set, refer to the ISO designation and dimensional data to confirm fitment or request technical clarification. For tailored recommendations on Tungaloy T6215 inserts and to ensure the right holder pairing, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert assistance and ordering. Technical data Article number: 6944862 Manufacturer SKU: TUN6944862 SKU: 6944862-Tungaloy Model series: ISO‑duty turning inserts Name: TNMG160404 T6215 Tungaloy insert Data Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Insert angle: 60° Corner radius: 0.4 mm Hole: cylindrical Special features Material: carbide Coating / grade: T6215 (CVD) Chipbreaker: double‑sided Shape: triangular Application: turning stainless steel Cutting conditions: stable to slightly interrupted cuts System compatibility: ISO‑compliant insert for matching holders and boring bars Notes: compatibility depends on geometry, clearance, tolerance class and fastening FAQ Is this insert suitable for stainless steel? Yes. The TNMG160404 T6215 insert is formulated for turning stainless steel, offering wear resistance and chip control for stable to slightly interrupted cutting conditions. How does the double‑sided design help production? The double‑sided configuration extends usable cutting edges before replacement, improving uptime and reducing the frequency of index changes for more efficient machining cycles. What determines whether a holder is compatible with the insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The ISO designation and the insert dimensions should match the holder specification. Can the insert cope with light interruptions in the cut? Yes. The T6215 grade and chipbreaker geometry are specified for stable to slightly interrupted cuts, providing a balance between edge robustness and finish quality. What does the T6215 designation indicate? T6215 denotes a CVD‑coated carbide grade optimised for turning stainless steel, designed for reliable wear resistance and consistent cutting performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and a triangular 60° geometry with 0.4 mm corner radius for consistent performance in stainless-steel turning; the double-sided design also reduces tooling cost per edge. Order the TNMG160404 T6215 turning insert via Metav Werkzeuge or consult our specialists for application advice. TNMG 160404 T6215 turning insert (Tungaloy) A TNMG160404 T6215 ISO-standard indexable insert engineered for turning stainless steel under stable to lightly interrupted conditions. CVD-coated carbide grade T6215 Suited for stainless steel turning Triangular 60° insert, corner radius 0.4 mm Double-sided with cylindrical hole Consistent wear resistance for reliable stainless-steel turning The CVD-coated carbide grade T6215 delivers a balanced combination of wear resistance and toughness that suits the demands of machining stainless steel. The chemical vapour deposition layer reduces abrasive wear and helps maintain a stable cutting edge across longer tool lives, which translates into fewer tool changes and more predictable production cycles. As an ISO-conform insert, the geometry and coating are optimised to provide consistent surface finish in external and internal turning, while the neutral 0° free angle supports controlled cutting forces in steady operations. Seamless integration with ISO tooling systems This triangular insert follows ISO norms, so compatibility with holders depends on form, free angle, tolerance class, fastening, size and thickness. The insert’s triangular 60° form and the cylindrical hole allow secure clamping in a range of external holders and boring bars when the corresponding seat and clamp are matched correctly. A practical system setup typically comprises the ISO insert, a matching outer holder or boring bar, a shim or clamping set and replacement screws, enabling quick changeover and repeatable positioning. Clear specification of the insert’s ISO code and dimensions simplifies procurement and reduces setup errors on precision lathes. Cost-effective cutting and predictable tool life The double-sided design provides multiple cutting edges per insert, improving economy per edge and reducing disposal frequency. The corner radius 0.4 mm supports a balance between chip control and surface integrity—small enough to maintain dimensional precision yet large enough to deliver robust cutting edges for steady feeds. Paired with the T6215 coating, the insert is intended for productive turning of rostfrei materials where stable to lightly interrupted cuts are expected. Selecting the correct chipbreaker and matching the grade to the workpiece stability ensures efficient swarf control and consistent component quality without overcomplicating process parameters. Choose the Tungaloy T6215 grade for demanding stainless-steel turning — contact Metav Werkzeuge for ordering and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer: Tungaloy Manufacturer article number: 6944852 SKU: 6944852-Tungaloy Manufacturer SKU: TUN6944852 Model series: ISO indexable turning plates Material: carbide Facts ISO designation: TNMG160404 Insert shape: triangular Insert size: 16 mm Included angle: 60° Corner radius: 0.4 mm Free angle: 0° Hole: with hole (cylindrical hole) Cutting edges: double-sided Special features CVD-coated carbide, grade T6215 Suitable for stainless steel turning Compatible with ISO holders; compatibility determined by form, free angle, tolerance class, fastening, size and thickness Typical applications: external and internal turning Chipbreaker: double-sided System composition: ISO insert, matching outer holder or boring bar, shim/clamping set and spare screws Stable to lightly interrupted cuts FAQ What materials is this insert primarily intended for? The TNMG160404 T6215 turning insert from Tungaloy is designed primarily for machining stainless steel; the CVD-coated carbide substrate provides wear resistance suited to rostfrei materials. Which holders will accept this ISO insert? Compatibility with a holder is determined by the insert form, free angle (0°), tolerance class, fastening method, size and thickness; matching a TNMG seat in the chosen holder or boring bar ensures correct clamping and performance. How many usable edges does the insert offer and how is it indexed? The double-sided triangular design delivers multiple usable edges for economical indexing; edges are indexed according to the holder’s clamping and the insert orientation specified by the ISO seat. Is the grade suitable for interrupted cuts or heavy interruption? The T6215 grade is optimised for stable to lightly interrupted cutting conditions; for heavy interruptions, a tougher grade or altered process parameters should be considered. What components are required to build a complete tooling setup? A typical setup includes the TNMG ISO insert, a compatible outer holder or boring bar, a shim/clamping set and replacement screws; the SKU 6944852-Tungaloy identifies the specific item for ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T6215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated cemented carbide and a precise 0.4 mm corner radius for consistent performance in stainless-steel turning; the double-sided design reduces tooling costs and streamlines inventory. Order directly via Metav Werkzeuge or consult our team for application advice. TNMG160404 T6215 TNMG Turning Insert for Turning (Tungaloy) TNMG160404 T6215 is an ISO triangular turning insert designed for controlled machining of stainless steels in stable to slightly interrupted cutting conditions CVD-coated cemented carbide for wear resistance Double-sided chipbreaker, stable chip control Triangular 60° geometry for versatile turning 0.4 mm corner radius, ISO 16, cylindrical hole Consistent wear resistance for stainless-steel turning The CVD-coated grade T6215 delivers an optimised balance of hardness and toughness, giving cemented carbide wear resistance under the thermal loads typical of machining stainless steels. The coating reduces flank wear and adhesion, which translates into longer tool life and fewer indexings. For processes with steady feeds and moderate depths of cut, this grade preserves edge integrity and supports reliable surface quality — a tangible production benefit that reduces interruptions and scrap. Secure clamping and proven geometry for ISO tooling systems Designed as an ISO-compliant triangular insert with 60° geometry, compatibility with the holder is determined by form, clearance angle, tolerance class, fastening and thickness. The insert's 0.4 mm corner radius provides a defined edge for finishing profiles while the hole with cylindrical bore enables positive, repeatable clamping. The double-sided layout and changeable chipbreaker make the component a cost-effective choice: two usable edges per side increase indexable life and reduce the frequency of replacements in volume production. Practical advantages in workshop and production environments The combination of stable chip control via the double-sided chipbreaker and the wear-resistant T6215 grade supports steady cycle times and fewer unscheduled tool changes. The insert is suited to both external and internal turning when selected with a compatible holder and the correct chipbreaker for the workpiece stability. For mixed-production shops, this versatility reduces the need for specialised inserts and simplifies tool management, improving throughput without compromising surface finish or dimensional consistency. For application support, availability and to order Tungaloy TNMG160404 T6215 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for product advice and immediate supply Technical data Article number: 6944890-Tungaloy Facts Manufacturer SKU: TUN6944890 Manufacturer article number: 6944890 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall (cemented carbide) Grade / coating: T6215 / CVD-coated Geometry code: 160404 Size: 16 (ISO) Corner radius: 0.4 mm Clearance angle: 0° Included hole: with hole Hole style: cylindrical hole Plate form: triangular Chipbreaker: double-sided Application: Turning Included angle: 60° Special features ISO-standard triangular turning insert Suitable for rostfreie Stähle (stainless steels) For stable to slightly interrupted cuts Two-sided, indexable configuration Precise clamping via cylindrical bore Optimised for production environments FAQ What materials is this insert suitable for? The TNMG160404 T6215 insert is formulated for machining stainless steels and performs best in stable to lightly interrupted turning operations. How does the T6215 grade affect tool life? The CVD-coated T6215 grade increases wear resistance and reduces adhesion, which extends service life and maintains surface quality in stainless-steel turning with the TNMG insert. Can the insert be used for both external and internal turning? Yes; when used with a compatible external holder or boring bar and the correct chipbreaker, the insert is suitable for both external and internal turning operations. What is the benefit of the double-sided chipbreaker? The double-sided chipbreaker offers two usable cutting edges per side, improving economy and reducing tool changes in production runs while supporting consistent chip formation. Does the insert require a specific clamping system? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the cylindrical bore ensures repeatable clamping when matched to ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9205 grade and the precise 0.4 mm corner radius for productive, high-speed turning of steel under stable conditions; order the insert directly via Metav Werkzeuge or consult our advisors if guidance is required. TNMG 160404 T9205 ISO turning insert for turning — Tungaloy TNMG 160404 T9205 is a triangular ISO indexable insert designed for productive external and internal turning of steel, featuring a CVD-coated carbide grade optimised for higher cutting speeds and stable setups. ISO triangular TNMG 160404 CVD-coated carbide T9205 0.4 mm corner radius Double-sided chipbreaker with cylindrical hole Proven cutting performance for stable turning operations The CVD-coated carbide grade T9205 delivers a hard, wear-resistant surface that sustains elevated cutting speeds while preserving edge integrity. For turning applications where machine and workpiece rigidity are assured, this grade offers a reliable balance between tool life and productivity. The combination of coating and substrate ensures consistent wear behaviour, which reduces tool change frequency and contributes to more predictable cycle times in serial production. Clear compatibility and straightforward set-up The insert conforms to ISO dimensions and the TNMG form, so compatibility with relevant ISO holders is determined by form, relief angle, tolerance class, fastening and thickness. The insert is supplied with a cylindrical hole for secure clamping and a standard 60° included angle, enabling simple mounting in many external holders and boring bars. This design reduces set‑up complexity and helps maintain repeatable positioning when replacing or indexing inserts. Efficiency and surface quality from the radius and chip control The 0.4 mm corner radius is suited to medium-finishing passes, improving surface finish without compromising cutting stability. The double-sided chipbreaker provides reliable chip formation and evacuation when machining steel, lowering the risk of built-up edge and promoting steady metal removal rates. Together these features help to optimise the cost-per-part by extending edge life and reducing scrap from poor surface quality. Practical handling and maintenance benefits As a triangular, double-sided indexable insert the component offers multiple usable edges, enabling economical edge rotation and replacement. The insert’s 4.76 mm plate thickness and robust carbide substrate support moderate to heavy interrupted cuts when the machine setup allows. Inserts of this type are intended for indexing rather than regrinding; replacing worn edges is typically faster and preserves process stability. For tailored cutting data and recommendations, see holder manufacturer guidance or contact technical advisors for feed and speed suggestions specific to the application. For ordering and application advice on the T9205 CVD-coated indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to support selection and delivery. Technical data Article number: 6785776 SKU: 6785776-Tungaloy Manufacturer SKU: TUN6785776 Product name: TNMG160404 T9205 Tungaloy indexable insert Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Hole style: cylindrical Special features Carbide substrate CVD-coated grade T9205 Double-sided chipbreaker Triangular insert, ISO TNMG form With cylindrical hole for secure clamping Intended for turning steel under stable conditions FAQ What materials is this insert intended for? The Tungaloy TNMG 160404 T9205 insert is specified for productive turning of steel; the T9205 grade is optimised for wear resistance at higher cutting speeds in stable machining conditions. How many usable cutting edges does the insert provide? The triangular, double-sided design offers six usable cutting edges when indexed correctly, allowing economical rotation and extended service life before replacement. Is this insert compatible with standard ISO TNMG holders? Yes — the TNMG 160404 form follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening method and thickness, so verify fitment before first use. Can the insert be resharpened or reground? This indexable insert is designed for indexing rather than regrinding; replacing or indexing edges is the recommended practice to maintain consistent performance and process reliability. What benefits does the T9205 coating provide in practice? The CVD-coated T9205 grade improves wear resistance and maintains edge stability at elevated cutting speeds, which helps to reduce tool changes and supports consistent surface finish in serial turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade T9215 for high productivity in medium steel turning and a TNMG160404 triangular insert with 60° geometry for stable machining; order genuine inserts via Metav Werkzeuge or consult our team for application advice. TNMG160404 T9215 Turning insert (TNMG, 160404) by Tungaloy The TNMG160404 T9215 is an ISO‑standard triangular turning insert engineered for medium‑steel applications, combining a CVD‑coated carbide grade with double‑sided geometry for productive continuous or slightly interrupted cuts. CVD‑coated carbide grade T9215 for medium steel ISO‑standard TNMG160404 triangular insert, 60° Double‑sided geometry with 0.4 mm corner radius Cylindrical hole fixing; thickness 4.76 mm High productivity for medium‑steel machining The CVD‑coated carbide grade T9215 delivers a balance between wear resistance and fracture toughness that supports higher cutting speeds and longer tool life in medium‑strength steel. By favouring a coating designed to reduce flank and crater wear, the insert enables a measurable increase in throughput while maintaining dimensional consistency. For production environments where cycle time and repeatability matter, this combination reduces downtime for insert changes and contributes directly to process efficiency and lower cost per part. Improved chip control and surface quality A double‑sided chipbreaker geometry combined with a 0.4 mm corner radius provides controlled chip formation and evacuation during both light and moderate depth cuts. Controlled chip flow reduces tool interference and enhances surface finish, translating the insert’s geometry into predictable part quality. The term "chipbreaker" denotes a dedicated flank and rake design that folds and breaks chips; this is especially useful when machining long bars or components where uninterrupted chip flow would otherwise hinder productivity. Clear mounting compatibility and secure fixing As an ISO‑standard TNMG insert with a cylindrical locating hole, the component fits a wide range of holders that match form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole ensures secure clamping with standard screws and seats, reducing the risk of micro‑movement under load. When matching an insert to a holder, attention to the specified 60° included angle and the 0° clearance feature is crucial for correct seat geometry and predictable cutting engagement. Coating and substrate engineered for reliable performance The insert is manufactured from sintered carbide and finished with a CVD coating tailored for medium‑steel turning. The coating provides thermal stability at elevated cutting temperatures and improves resistance to abrasive wear. For applications with continuous or slightly interrupted cuts, this construction offers repeatable performance and a reliable service life, which is particularly relevant in batch production and long‑run turning operations where consistency is paramount. For product procurement or tailored technical advice on Tungaloy TNMG160404 T9215 inserts, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and supply options. Technical data Article number: 6775276-Tungaloy Manufacturer article number: 6775276 Manufacturer SKU: TUN6775276 Model series: ISO-Drehwendeschneidplatten Application: Drehen Numbers / Core technical data Corner radius: 0.4 mm Insert size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance (relief) angle: 0° Hole: with hole (cylindrical) Designs / Special features CVD‑coated carbide, grade T9215 Triangular insert, double‑sided chipbreaker ISO‑standard TNMG160404 designation Cylindrical locating hole for secure clamping Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert designed for? The TNMG160404 T9215 insert is optimised for medium‑strength steel machining; the CVD coating and carbide substrate balance wear resistance and toughness for reliable performance in steel turning. Can the insert be used for interrupted cuts? Yes, the insert’s fracture‑resistant carbide and double‑sided geometry make it suitable for continuous and slightly interrupted turning operations, maintaining stability under moderate shock. How is the insert fixed to a toolholder? This ISO‑standard insert uses a cylindrical locating hole and standard clamping screws; holders must match the TNMG form, 60° angle and thickness for secure seating. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, improving edge stability without significantly increasing cutting forces in typical turning operations. Is grade T9215 suitable for high cutting speeds? Grade T9215 is formulated to combine wear resistance with toughness, enabling productive cutting speeds in medium steel; exact parameters depend on machine rigidity and workpiece setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines robust wear resistance with fracture safety and high productivity in medium steel turning; order the inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal grade selection. TNMG 160404 T9215 turning insert — Tungaloy A TNMG160404 T9215 ISO-standard triangular turning insert designed for medium steel machining, offering a CVD-coated carbide grade for high productivity in continuous to lightly interrupted cuts. Triangular TNMG form with 60° geometry CVD-coated carbide for wear resistance 0.4 mm corner radius for accurate profiling Double-sided insert with cylindrical hole Maximise material removal and uptime with a productive grade The T9215 grade is a CVD-coated carbide developed for the middle range of steel machining where both wear resistance and fracture toughness are required. Its composition supports sustained material removal rates in continuous and lightly interrupted cuts, which translates into shorter cycle times and a lower cost per part. The combination of high abrasion resistance and robust edge stability reduces unexpected tool changes and contributes directly to improved productivity on shop-floor turning operations. Simplified tooling choices through ISO conformity and consistent geometry Built to an ISO-standard outline, the insert ensures predictable compatibility with holders when matching form, clearance, tolerance class, fastening and size. The 60° triangular geometry provides stable cutting engagement and flexibility in application, while the measurable specifications—such as the plate size and clearance angle—make selection straightforward for process planners. Clear, standardised geometry reduces setup time and eases integration into existing tool systems. Controlled edge form for repeatable surface quality The 0.4 mm corner radius delivers a defined profile that improves part finish and helps dampen cutting-induced vibration in many turning tasks. The insert's double-sided design and cylindrical hole enable reliable clamping and economical indexing, offering two usable edges per side where applicable and consistent seating for repeatable results. This controlled edge geometry supports stable chip formation and predictable surface integrity during finishing passes. System-level benefits: seamless integration and practical maintenance As part of a standard insert system, the package concept includes the indexable plate, a matching external holder or boring bar, and the necessary shim/clamping set and replacement screws for secure mounting. Identification by article and manufacturer SKU simplifies procurement and inventory management, while the ISO conformity reduces the need for trial-and-error trials in holder selection. The TNMG160404 option from a recognised manufacturer presents a practical balance between tool life and operational simplicity, supporting effective process planning and reduced maintenance overhead. For application advice or to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6796092 Manufacturer SKU: TUN6796092 Our SKU: 6796092-Tungaloy Designation: TNMG160404 Grade: T9215 Material: Carbide Model series: ISO turning inserts Facts Geometry angle: 60° Corner radius: 0.4 mm Plate size: 16 mm ISO designation: 160404 Clearance angle: 0° Special features CVD-coated carbide grade Double-sided chipbreaker Triangular plate form With cylindrical hole ISO-standard turning insert Suitable for medium steel turning Compatible with external holders and boring bars FAQ What materials is this insert suitable for? The TNMG160404 in grade T9215 is designed primarily for medium steel machining and combines wear resistance with fracture safety for continuous to lightly interrupted cuts. How does the 0.4 mm corner radius affect the finished surface? A 0.4 mm corner radius provides a controlled profile that improves surface finish and helps reduce vibration, delivering repeatable machining quality with the Tungaloy turning insert. Is this insert compatible with standard TNMG holders? The insert follows ISO geometry; compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness—confirm holder fit before mounting. Can the insert be indexed to use multiple cutting edges? The double-sided design and central cylindrical hole allow reliable clamping and economical indexing where the holder system supports reverse-side use. What does the T9215 grade offer compared with general-purpose grades? T9215 is a dedicated CVD-coated carbide grade optimised for the mid-range of steel applications, offering improved wear resistance and breakage safety for higher productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) for high wear resistance and a 0.4 mm corner radius that delivers reliable surface quality in medium steel turning; order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. TNMG160404 T9215 indexable insert for turning — Tungaloy The TNMG160404 T9215 is an ISO-standard triangular indexable insert for turning, optimised for medium steel machining with a 0.4 mm corner radius and a 60° geometry Triangular ISO insert TNMG shape CVD-coated carbide grade T9215 for wear resistance 0.4 mm corner radius for versatile finishes Suitable for medium steel, continuous to light cuts Improved productivity through stable cutting performance The combination of a CVD-coated surface and a robust carbide substrate delivers a measurable increase in process stability for turning operations. The T9215 grade balances wear resistance and breakage resistance, which reduces unplanned tool changes and supports longer uninterrupted cutting periods. For machining medium-strength steels under continuous or slightly interrupted cuts, this geometry optimises metal removal rates while maintaining consistent tool life, lowering overall machining costs through fewer indexings and predictable performance. Consistent surface finish with controlled chip formation A triangular insert with a 0.4 mm corner radius and an integrated chipbreaker on both sides gives repeatable surface quality and reliable chip control in typical turning applications. The 60° cutting angle contributes to stable cutting forces and improved dimensional control on external and internal profiles. The double-sided chipbreaker enables economical use of the insert by offering two usable cutting edges per side, while the CVD layer aids in heat resistance and reduces adhesive wear. This combination results in better surface integrity and fewer rejects in serial production. Easy integration into ISO tooling systems and straightforward handling Designed as an ISO-standard turning insert, the component fits a wide range of compatible holders; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness. The insert’s 4.76 mm thickness, 16 mm inscribed circle size and cylindrical hole simplify clamping and quick replacement in indexable holders or boring bars. Clear geometry and standardised dimensions reduce setup complexity, shorten changeover times and help maintain reproducible machining results across different machines and operators. For high-productivity medium steel turning, contact Metav Werkzeuge for availability of Tungaloy TNMG160404 T9215 inserts and tailored process support; eMail info@metav-werkzeuge.com or call +49 2822 7131930 to request stock information or technical consultation Technical Data Article number: 6773926 Manufacturer SKU: TUN6773926 Commodity SKU: 6773926-Tungaloy Name: TNMG160404 T9215 Tungaloy insert Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 60° Hole style: with cylindrical hole Special features Material: carbide Coating / grade: T9215 (CVD-coated) ISO series: ISO turning indexable inserts Shape: triangular Chipbreaker: double-sided Application: turning Compatible with ISO holders (form, clearance, tolerance, fixing, size, thickness) FAQ What materials is this insert suited for? The TNMG160404 T9215 insert is primarily intended for medium steel machining; the T9215 grade combines wear resistance and breakage resistance for productive turning. How many cutting edges are available per insert? The triangular TNMG form offers multiple usable edges; the TNMG160404 with a double-sided chipbreaker allows economical indexing of the insert. What are the key dimensional specifications to check when selecting a holder? Check the 16 mm inscribed circle, 4.76 mm thickness, 0.4 mm corner radius and the 60° geometry to ensure compatibility with the chosen holder. Is the coating suitable for interrupted cuts? The CVD-coated T9215 grade provides enhanced wear and heat resistance, making it suitable for continuous and light interrupted cutting conditions in medium steels. Which SKU should be ordered for this original Tungaloy insert? Order using the manufacturer article number 6773926 or manufacturer SKU TUN6773926 for the TNMG160404 T9215 original Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide and a robust triangular geometry for reliable performance in medium steel turning, plus simplified tool logistics through ISO compatibility; order the insert directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. TNMG160404 T9215 — Tungaloy triangular indexable turning insert for turning The TNMG160404 T9215 is a triangular indexable turning insert designed for medium steel machining in ISO-standard tool systems, offering a blend of wear resistance and toughness for productive continuous or lightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker for consistent chips 16 mm triangular insert with 0.4 mm radius Higher output through durable CVD-coated grade The insert’s CVD-coated T9215 composition combines a wear-resistant coating with a tough cemented carbide substrate to extend tool life under typical shop-floor conditions. This material pairing reduces flank wear and resists chipping during steady production runs, which translates into fewer tool changes and higher machine utilisation. Specified as a first-choice grade for medium steel, the geometry and coating are optimised to maintain a stable cutting edge while allowing for the productivity gains associated with continuous and light interrupted cutting regimes. Predictable fit and reduced setup time with ISO conformity Compatibility is determined by the insert’s form, relief angle, tolerance class, clamping method, size and thickness, and this insert is manufactured to ISO dimensions for straightforward integration into existing toolholders. The 16 mm triangular format, 4.76 mm thickness and 0° relief angle ensure a secure seat and repeatable positioning, while the 60° included angle supports common external turning profiles. The result is predictable tool performance, quicker setups and consistent part tolerances across batches, making the insert a dependable choice for routine turning operations. Efficient chip control and economical edge use Equipped with a double-sided chipbreaker, the insert controls chip formation for reliable evacuation and surface finish, while providing multiple indexable faces for economic use of the cutting material. The design supports clean chips in the machining of medium steel and simplifies recovery of usable edges, reducing tooling costs per part. As part of a complete system—insert, matching holder, shim/clamp set and replacement screws—the component is intended to deliver repeatable results while keeping inventory management straightforward for production shops. Contact Metav Werkzeuge for tailored application advice and to order Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and delivery information Technical Data Article number: 6944813 Manufacturer SKU: TUN6944813 Label: TNMG160404 T9215 Tungaloy insert Manufacturer: Tungaloy Core data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Hole: with cylindrical hole Chipbreaker: double-sided Materials & features Material: cemented carbide Coating/grade: T9215 (CVD-coated) Application: turning Suitable for: medium steel machining ISO-standardised insert format System components: insert + holder + shim/clamp + replacement screws FAQ Which materials is this insert best suited for? The TNMG160404 T9215 insert by Tungaloy is optimised for medium steel machining and delivers a balance of wear resistance and toughness suited to continuous and lightly interrupted cuts. How does the T9215 grade affect tool life? The CVD-coated T9215 grade provides improved wear resistance and edge stability compared with uncoated grades, which helps to extend tool life and maintain consistent surface quality under production conditions. How is compatibility with toolholders ensured? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standardised geometry of this indexable turning insert simplifies selection of a matching holder. Does the insert offer multiple usable edges? Yes—being double-sided and triangular, the insert provides multiple indexable faces to reduce tooling cost per edge and to support economical indexation during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and reliable edge strength combined with ISO compatibility for secure clamping and predictable performance; order via Metav Werkzeuge or consult our technical advisers for application-specific guidance. TNMG 160404 T9215 turning indexable insert — CVD-coated carbide, 0.4 mm radius | Tungaloy TNMG160404 T9215 is an ISO-format indexable insert designed for general turning applications in medium steel machining, offering a balance of wear resistance and fracture toughness. CVD-coated carbide T9215 for medium steel 0.4 mm corner radius for reliable edge strength 60° triangular form, double-sided use Cylindrical hole; 4.76 mm plate thickness Consistent productivity through a wear-resistant grade The insert’s CVD-coated carbide composition in the T9215 grade delivers high wear resistance while maintaining fracture toughness, making it particularly effective for continuous to lightly interrupted turning. This combination reduces tool changes and supports steady cycle times on medium steel, which directly improves process efficiency. The coating promotes stable cutting performance over longer tool life, allowing predictable planning of production runs. Geometry that secures repeatable accuracy and secure clamping A 60° triangular shape and double-sided design provide economical use of the cutting edges; the 0.4 mm corner radius balances edge strength with fine profile control. The insert features a cylindrical hole for positive locating and a plate thickness of 4.76 mm, ensuring compatibility with standard ISO holders when matching form, relief angle, tolerance class, fastening and size. Where a 0° relief angle is specified, the geometry supports robust cutting actions and repeatable seating in the pocket, which is essential for maintaining dimensional consistency across batches. Practical guidance for machining and process security Intended for external and internal turning, this insert performs best when the chipbreaker and grade selection are matched to workpiece material, machining type and setup rigidity. For medium steel, the T9215 grade is a first choice: it balances longevity with resistance to edge chipping. To reduce vibration and improve surface finish, ensure adequate clamping and select cutting parameters in line with machine capability; where stability is limited, opt for conservative depth and feed settings. For application-specific parameter recommendations or holder compatibility checks, Metav Werkzeuge provides technical support and can advise on the correct matching of insert form and holding system. For high-productivity medium-steel turning, specify the Tungaloy TNMG160404 T9215 insert through Metav Werkzeuge or request tailored machining advice from our consultants at Metav Werkzeuge. Technical Data Article number: 6772328 Manufacturer SKU: TUN6772328 Model series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Angle: 60° Special features Grade/coating: T9215 (CVD-coated) Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Typical system: ISO insert with matching holder, shim and clamp set FAQ What materials is this insert best suited for? The TNMG160404 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance with fracture toughness for continuous to lightly interrupted cuts. Is the insert reversible and economical to use? Yes, the triangular, double-sided design allows multiple cutting edges per insert, improving cost efficiency and reducing changeover frequency. How is holder compatibility determined for this insert? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; matching those parameters ensures correct seating and clamping of the TNMG160404 T9215. Can this insert be used for internal turning operations? The insert is suitable for both external and internal turning provided the holder and overhang are appropriate for the required geometry and stability. Does the T9215 grade require specific cutting parameters? Cutting parameters should reflect machine rigidity and workpiece condition; for medium steel, the T9215 grade performs reliably under standard speeds and feeds, with adjustments advised for interrupted cuts or marginal clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Taking advantage of the T9215 CVD-coated carbide grade together with a 0.4 mm corner radius and the 60° triangular form delivers a durable, high-productivity solution for medium steel turning; order the TNMG160404 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404 T9215 triangular ISO turning insert — for medium steel turning, CVD-coated carbide (Tungaloy) A TNMG160404 T9215 triangular indexable insert engineered for turning operations in medium steel, offering a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts Triangular 60° form for indexable turning CVD-coated carbide grade T9215 for wear resistance Double-sided insert with cylindrical hole 0.4 mm corner radius for strength and finish Higher productivity through wear-resistant coating and grade The CVD-coated carbide composition and the T9215 grade combine to provide consistent wear resistance while maintaining edge robustness under production conditions. CVD (chemical vapour deposition) applies a hard, adherent coating that reduces flank wear and extends usable edge life, which in turn supports longer uninterrupted machining cycles and fewer indexings. For medium steels this means reduced downtime and improved component throughput without sacrificing surface quality. Compatibility and system fit that reduce setup complexity Compatibility with the toolholder depends on insert shape, clearance angle, tolerance class, fastening method, size and thickness; the triangular 60° geometry with a cylindrical hole ensures reliable seating and repeatable clamping in standard ISO holders. Selecting the matching chipbreaker and grade to suit workpiece material and machining stability simplifies process setup and helps to avoid unplanned regrinds. Documentation of holder type and tolerance class allows straightforward verification of fitment before machining. Practical machining advantages and handling recommendations The double-sided design offers economical indexable edges, while the 0.4 mm corner radius delivers a compromise between edge strength and surface finish—larger radii increase strength, smaller radii improve fine finishing. For the described grade, use steady feeds and speeds appropriate to medium steel and favour continuous cuts or light interruptions to exploit the grade’s fracture resistance. The insert’s geometry and coating support predictable tool life and consistent part quality, contributing to reduced scrap rates and stable series production. For ordering or a compatibility check with specific holders, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery arrangements Technical Data Article number: 6772346 Manufacturer SKU: TUN6772346 SKU: 6772346-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 T9215 Facts Size: 16 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Sides: double-sided Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T9215 Typical application: turning Suitable for: medium steel Plate form: triangular Chipbreaker: double-sided Freeform/system: ISO insert, requires matching holder and clamping set FAQ What materials is this insert suited for? The TNMG160404 T9215 insert is optimised for medium steel machining, where the CVD-coated carbide grade offers a balance of wear resistance and fracture toughness. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and helps withstand slight interruptions while still delivering acceptable surface finish when using the appropriate feeds for the TNMG160404 geometry. Is the insert indexable and reversible? Yes, the double-sided triangular design allows multiple indexings to extend usable life before disposal, making the TNMG160404 T9215 cost-effective for series production. Which holders are compatible with this ISO insert? Compatibility is determined by insert shape, size and clamping system; ensure the holder matches the TNMG160404 form, 16 mm size and cylindrical-hole fastening for secure seating. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous to slightly interrupted cuts; for heavy interruptions a different grade or more robust geometry may be required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and a compact 60° triangular form for reliable, high-productivity turning; compatible with ISO holders when matching form, clearance angle and size. Order directly via Metav Werkzeuge or ask the consultants for application support. TNMG160404 T9215 turning insert (TNMG 160404) for turning – Tungaloy TNMG160404 T9215 is an ISO-standard triangular turning insert designed for productive external and internal turning of medium steel. CVD-coated carbide grade T9215 60° triangular insert, 0.4 mm nose radius Double-sided chipbreaker, with central hole ISO-standard TNMG160404, thickness 4.76 mm Boosted productivity for medium steel turning The TNMG160404 T9215 combines a CVD-coated surface with a fine-grained carbide substrate to deliver high wear resistance and fracture resistance in the typical speed and feed ranges for medium steel. This insert is specified for continuous to light interrupted cuts, which means longer machining cycles with fewer index changes and improved component throughput. The hardened coating reduces flank and crater wear, translating directly into consistent dimensional accuracy and predictable tool change intervals — ideal where cycle time and reproducibility matter. Secure cutting edge and consistent chip control A double-sided chipbreaker and a precisely defined 0.4 mm nose radius promote stable chip formation and improved surface finish on turned parts. The chipbreaker geometry supports effective evacuation under a range of feeds, reducing the risk of re-cutting and workpiece damage. For parts where edge integrity and surface quality are decisive, the combination of the chip control features and the material behaviour of the grade ensures repeatable results and a longer interval between index rotations. Simple integration with ISO tooling systems As an ISO-standard triangular insert with a central cylindrical hole, this item is compatible with a wide range of holders when the form, clearance angle, tolerance class, fastening method, size and thickness are matched. The plate thickness of 4.76 mm and triangle size of 16 mm make mounting straightforward in common external holders or boring bars designed for TNMG inserts. Specification-driven compatibility reduces setup time and avoids surprises at commissioning, supporting a smooth transfer from design to production. Practical advantages for workshop decision-making Choosing a CVD-coated carbide grade that balances wear resistance and toughness helps manage tooling costs across production runs. The insert’s design favours a stable cutting edge under typical shop-floor conditions, with benefits including reduced scrap, longer effective tool life and fewer interruptions for tool handling. For operations seeking reliable performance in steel turning without frequent retooling, the grade and geometry together represent a pragmatic, performance-focused option. Contact Metav Werkzeuge for application advice and to request a tailored supply of genuine Tungaloy TNMG160404 T9215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775266 Manufacturer SKU: TUN6775266 Seller SKU: 6775266-Tungaloy ISO designation: TNMG160404 Numbers / Core technical data Nose radius: 0.4 mm Insert thickness: 4.76 mm Triangle size: 16 mm Included angle: 60° Clearance angle: 0° Manufacturer article number: 6775266 Special features / Design details Material: carbide Coating: CVD-coated, grade T9215 Chipbreaker: double-sided Plate shape: triangular Hole: with central cylindrical hole Typical application: external and internal turning of medium steel System: ISO turning insert, compatible with matching holders, shim/clamping sets and screws FAQ What materials is this insert best suited for? The TNMG160404 T9215 insert from Tungaloy is optimised for medium steel machining; the T9215 CVD coating balances wear resistance and toughness for continuous to light interrupted cuts. Is the insert reversible or single-use per edge? This triangular insert is double-sided with multiple cutting edges; the design allows index rotation to present fresh edges, extending the usable life of each insert. How does the chipbreaker affect machining? The double-sided chipbreaker on the TNMG160404 controls chip shape and evacuation, improving surface finish and reducing the chance of chip-related interruptions during turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the ISO-standard TNMG160404 fits holders designed for TNMG inserts when these parameters match. What are the key dimensions to check before assembly? Verify the triangle size (16 mm), thickness (4.76 mm), nose radius (0.4 mm) and central hole style (cylindrical) against the holder specifications and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Combining the T9215 wear resistance with the ISO triangular TNMG geometry delivers stable, high‑productivity medium‑steel turning; compatible clamping and a dual‑sided chipbreaker support continuous to slightly interrupted cuts — order the TNMG160404 T9215 insert directly via Metav Werkzeuge or consult our specialists for process recommendations. TNMG 160404 T9215 turning insert — CVD‑coated carbide, 60° triangle (Tungaloy) The TNMG 160404 T9215 is an ISO‑standard triangular turning insert for external and internal turning, offering a 60° shape and CVD‑coated carbide designed for productive machining of medium steels. ISO‑standard triangular form CVD‑coated carbide grade T9215 Suitable for medium steel; high wear resistance Dual‑sided chipbreaker with 60° geometry High productivity through wear‑resistant cutting-grade The CVD‑coated T9215 grade pairs a robust carbide substrate with a wear‑resistant coating to extend tool life under continuous and lightly interrupted cuts. This combination increases machining uptime and reduces indexing frequency, which in turn improves overall throughput. The CVD‑coated layer helps to maintain edge integrity at common cutting speeds for medium‑strength steels, meaning fewer tool changes and steadier surface finishes. For operations prioritising consistent cycle times, the selection of this grade supports predictable performance and lower process variation. Reliable fit and secure clamping for ISO tool systems The insert follows the ISO designation TNMG160404, ensuring compatibility with standard TNMG pockets when holder form, clearance angle, tolerance class, fastening method, size and thickness match. The 60° geometry and triangular outline create stable seating in the pocket; the presence of a cylindrical centre hole allows positive clamping and repeatable seating. Clear technical alignment between insert and holder reduces set‑up time and improves reproducibility of axial and radial positions, which benefits batch production that requires interchangeability across multiple machines. Controlled chip formation and adaptable application profile Equipped with a double‑sided chipbreaker, the insert supports efficient chip control for a range of turning conditions, notably external and internal turning of medium steels. The chipbreaker geometry promotes shorter, manageable chips that reduce the risk of entanglement and help maintain coolant flow across the cutting zone. Matching the chipbreaker and the T9215 grade to the workpiece material and the intended cutting strategy yields a balance between wear resistance and fracture toughness, enabling higher material removal rates without compromising process security. For medium‑steel turning tasks, specify the Tungaloy T9215 TNMG160404 insert for consistent productivity — contact Metav Werkzeuge for availability, cutting data sheets and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6796046 SKU: 6796046-Tungaloy Manufacturer SKU: TUN6796046 Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Facts Size: 16 mm Corner radius: 0.4 mm Geometry angle: 60° Clearance angle: 0° Centre hole: with cylindrical hole Special features Material: carbide Grade / coating: T9215, CVD‑coated Shape: triangular (TNMG) Chipbreaker: double‑sided ISO designation: TNMG160404 Application: turning (external and internal) Compatibility: depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The TNMG160404 T9215 insert is optimised for medium‑strength steels; the T9215 grade and CVD‑coating provide a balance of wear resistance and toughness suitable for productive steel turning. Is the insert compatible with standard TNMG holders? Compatibility relies on matching holder form, clearance angle, tolerance class, fastening and plate size; the TNMG160404 designation conforms to ISO forms used in standard TNMG pockets. What is the purpose of the double‑sided chipbreaker? The double‑sided chipbreaker on the TNMG 160404 T9215 helps produce shorter, controllable chips, improving coolant access and reducing entanglement risk during continuous and lightly interrupted cuts. Does this insert support internal turning as well as external turning? Yes — the insert is suitable for both external and internal turning when used in the correct holder and with appropriate cutting parameters. How is the insert secured in the holder? The triangular TNMG form with a cylindrical centre hole enables positive clamping; secure seating depends on correct holder geometry and fastening components Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com