TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide (T9215), a 0.4 mm corner radius and a robust 60° triangular geometry for stable, high-productivity turning operations; order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and process matching. TNMG160404 T9215 – ISO turning indexable insert, CVD-coated carbide (Tungaloy) The TNMG160404 T9215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for medium-steel machining and continuous to lightly interrupted cuts. CVD-coated carbide grade T9215, wear-resistant Triangular ISO insert TNMG 160404, 60° geometry 0.4 mm corner radius for precise turning Double-sided insert with cylindrical locating hole Reliable productivity for medium-steel turning The combination of a CVD coating and cemented carbide substrate in this grade delivers a balance of wear resistance and fracture toughness that supports consistent cycle times in production environments. The selected cutting material is particularly suited to medium-steel machining, where sustained performance under continuous cuts matters most. The coating reduces flank and crater wear, which means fewer interruptions for tool changes and a more predictable replacement cadence—advantages that translate directly into improved machine utilisation and reduced cost per component. Geometry engineered for accuracy and surface quality A 60° triangular form with a 0.4 mm corner radius provides a compromise between rigidity and finishing capability: the insert maintains edge strength for heavier cuts while allowing fine tool edge contact for acceptable surface finishes. The double-sided design increases usable edge count, improving economy per indexable edge. The cylindrical locating hole ensures secure clamping in compatible holders and helps maintain repeatable positioning after re-indexing. Compatibility with a given holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness—factors that should be verified to ensure the insert performs as intended. Easy integration and predictable process behaviour The insert is part of a system: an ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws form the assembly. Correct pairing reduces set-up time and improves process stability. The built-in double-sided chipbreaker supports chip control for a range of feeds and depths of cut, which helps avoid entanglement and reduces the need for secondary operations. When combined with appropriate speeds and feeds, the result is a robust cutting solution that contributes to consistent dimensional results and extended tool life. Contact Metav Werkzeuge for a compatibility check or to discuss batch availability of the Tungaloy TNMG160404 T9215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical assistance or tailored recommendations Technical data Article number: 6773955 Manufacturer SKU: TUN6773955 SKU: 6773955-Tungaloy Model series: ISO turning indexable inserts Designation: TNMG160404 Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Special features Material: cemented carbide Coating: CVD-coated (grade T9215) Shape: triangular Hole style: cylindrical locating hole Chipbreaker: double-sided Application: turning System components: compatible holder, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy TNMG160404 T9215 insert is optimised for medium-steel machining; its CVD-coated cemented carbide composition is chosen to balance wear resistance and toughness for this material class. How is the insert secured in the holder? The insert uses a cylindrical locating hole and is clamped in place by the corresponding holder, shim and screw arrangement; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. How many cutting edges are available per insert? This triangular, double-sided insert provides multiple usable edges, increasing economy by extending the total number of index positions before disposal. Does the coating suit interrupted cuts? Grade T9215 combines wear resistance with sufficient fracture toughness for continuous to lightly interrupted cuts; for severe interruptions consult Metav Werkzeuge for alternative grades. Can this insert be used for internal boring as well as external turning? Yes; the ISO TNMG160404 geometry is applicable to both external and internal turning when paired with a suitable holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance and reliable fracture toughness together with the insert’s double-sided chipbreaker and ISO-standard form for predictable clamping and machining results. Order the TNMG160404 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 T9215 TNMG — ISO turning insert for medium steel, Tungaloy TNMG160404 T9215 Tungaloy insert for external and internal turning applications, suited to continuous and lightly interrupted cuts in medium-strength steels ISO triangular insert, 60° cutting angle CVD-coated carbide T9215 for wear resistance 0.4 mm corner radius for versatile profiles Double-sided chipbreaker for stable chips Reliable cutting performance in medium-steel turning The CVD-coated carbide grade T9215 combines high wear resistance with sufficient toughness, enabling steady tool life in medium-steel applications. The coated substrate reduces flank and crater wear at elevated cutting speeds, which directly improves component repeatability and lowers downtime for tool changes. This makes the insert particularly suitable where consistent cycle times and predictable edge life matter for production planning. Clear geometry for predictable results The triangular geometry with a 60° cutting angle and a 0.4 mm corner radius delivers a reliable balance between strength and form accuracy. The 4.76 mm thickness and 16 mm inscribed circle ensure secure clamping in ISO-compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening and plate size, so holders and clamping sets must match these specifications. This focused geometry supports accurate contouring and repeatable part dimensions during both external and internal turning operations. Coating and substrate explained for non-specialists A CVD coating (chemical vapour deposition) provides a hard, well-adhered surface layer that resists abrasive wear while the carbide substrate supplies fracture resistance. In practical terms, the coating protects the cutting edge from rapid abrasion and the substrate prevents brittle failure, so operators see longer edge life and fewer interrupted cycles for insert replacement. For continuous to lightly interrupted cuts in steel, this combination offers an efficient compromise between speed and durability. Chip control and process stability The insert features a double-sided chipbreaker, designed to produce manageable chips across a range of cutting conditions. Controlled chips reduce the risk of re-cutting and improve surface finish while easing swarf handling at the machine. Stable chip formation also contributes to predictable cutting forces, supporting part quality and toolholder life in repetitive turning tasks. Practical fit and installation notes The plate comes with a cylindrical hole for secure fixation and is double-sided, allowing indexation to a fresh cutting edge. The ISO-series construction means replacement inserts follow standard sizing and clamping conventions, simplifying inventory and reducing the need for bespoke items. Ensure the selected holder matches the insert form, clearance (0° reported), tolerance class and fastening scheme for safe, vibration-free machining. Contact Metav Werkzeuge to confirm holder compatibility and secure the TNMG160404 Tungaloy insert for immediate delivery — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 6773895 Manufacturer SKU: TUN6773895 Model series: ISO turning inserts Material: carbide Grade: T9215 Facts ISO code: 160404 Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features CVD-coated carbide Double-sided chipbreaker Triangular insert form Suitable for external and internal turning Designed for medium steel, continuous to lightly interrupted cuts FAQ What materials is this insert suitable for? The TNMG160404 T9215 Tungaloy insert is optimised for medium-strength steels; the CVD coating and carbide substrate balance wear resistance and toughness for productive machining. How is the insert clamped in the holder? The insert is supplied with a cylindrical hole and is clamped according to ISO holder standards; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate size. How many cutting edges are available per insert? Being double-sided and triangular, the insert provides multiple indexable edges; indexation allows rotation to a fresh edge when required. What benefits does the T9215 grade offer in production runs? Grade T9215 delivers reliable wear resistance with good fracture toughness, supporting longer edge life and consistent component quality during continuous to lightly interrupted cuts. Is this insert suitable for internal turning? Yes, the geometry and grade make it appropriate for both external and internal turning operations when used with compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness combined with a 0.4 mm nose radius and ISO compatibility support stable, high‑productivity turning operations; Order the TNMG160404 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed TNMG160404 T9215 — ISO turning insert, CVD‑coated carbide, 0.4 mm nose radius (Tungaloy) The TNMG160404 T9215 is an ISO‑standard triangular turning insert designed for external and internal turning applications, offering a balance of wear resistance and fracture toughness for productive machining of medium steel CVD‑coated carbide grade T9215 Triangular ISO form TNMG, 16 mm inscribed circle 0.4 mm nose radius for precise finishing Double‑sided chipbreaker for controlled chips High productivity through a wear‑resistant grade The insert is manufactured from carbide with a CVD‑coating and the T9215 grade, a combination engineered to bring wear resistance and fracture toughness to medium‑steel turning. This specification enables longer cutting intervals and consistent part quality under continuous and slightly interrupted machining. The result is improved process stability and reduced downtime, which supports a more economical production flow while maintaining component tolerances ISO compatibility for predictable tool selection Produced to ISO dimensions and the TNMG form, compatibility with a holder is determined by form, clearance angle, tolerance class, mounting, size and thickness. The insert has an inscribed circle of 16 mm and a plate thickness of 4.76 mm, with a cylindrical hole for secure fixing. Specifying these parameters before procurement ensures the insert seats correctly in the toolholder, minimises setup time and avoids unexpected run‑out during turning Geometry that enhances surface finish and chip control A 0.4 mm nose radius and a 60° included angle improve finish capability while balancing strength at the cutting edge. The double‑sided chipbreaker is tuned for chip control in steel, promoting consistent chip formation and reliable evacuation. This geometry reduces the risk of re‑cutting and helps maintain dimensional accuracy, particularly when machining long components or when tool access is constrained Practical guidance for process integration Select a holder and clamping system that match the ISO TNMG form and ensure rigidity for best results; stability in the tool setup is essential for exploiting the T9215 grade’s strengths. Choose a chipbreaker and cutting parameters appropriate for continuous cutting or slightly interrupted cuts to extend tool life and increase overall productivity. For mixed production environments, the insert’s balanced properties make it a versatile choice for stable, repeatable turning operations with predictable results for batch and series manufacturing — TNMG160404 T9215 is well suited where process reliability is a priority For application support or compatibility checks for the Tungaloy TNMG insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder matching and delivery options Technical Data Article number: 6772310 Manufacturer SKU: TUN6772310 Name: TNMG160404 T9215 Tungaloy insert Model series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Inscribed circle (IC): 16 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Included angle: 60° Mounting: with hole (cylindrical) Special features Coating: CVD Grade: T9215 Double‑sided chipbreaker Triangular plate form (TNMG) Suitable for turning of steel For continuous to slightly interrupted cuts ISO‑standard insert FAQ Which materials is this insert designed for? The Tungaloy TNMG160404 T9215 insert is optimised for medium steel; the T9215 grade and CVD coating deliver wear resistance and toughness suited to steel machining How is holder compatibility ensured for TNMG inserts? Compatibility is determined by ISO form, clearance angle, tolerance class, mounting style, size and thickness; check these parameters against the holder specifications before fitting the TNMG160404 insert Can the insert be used for interrupted cutting? Yes, the grade and chipbreaker of the TNMG160404 are suitable for continuous to slightly interrupted cuts; heavy interruptions may require a different geometry or cutting strategy What chip control can be expected with the double‑sided chipbreaker? The double‑sided chipbreaker provides consistent chip control on steel, improving evacuation and reducing the risk of chip entanglement or re‑cutting Is the 0.4 mm nose radius suitable for finishing passes? A 0.4 mm nose radius offers a good compromise between edge strength and surface finish for general finishing and semi‑finishing applications Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a 0.4 mm corner radius and ISO compatibility for reliable, high-productivity turning; purchase directly via Metav Werkzeuge or consult their technical advisers for grade and chipbreaker selection. TNMG 160404 T9215 Turning insert (TNMG160404) — Tungaloy, ISO triangular, 60° The TNMG160404 T9215 is a triangular ISO turning insert designed for external and internal turning, offering robust wear resistance and fracture toughness for medium steel machining. CVD-coated carbide for high wear resistance Triangular 60° geometry with 0.4 mm radius Double-sided chipbreaker for reliable chip control ISO-compatible with cylindrical-hole mounting Boost productivity in medium steel with a durable grade The T9215 grade combines CVD-coated carbide construction with a balanced mix of wear resistance and toughness to support continuous to slightly interrupted cutting in medium steel. This composition reduces flank wear and extends edge life, which translates directly into fewer tool changes and more productive machining cycles. The insert’s specification as a grade for middle-range steel workpieces means machinists can expect consistent performance under typical workshop conditions, with the option to adapt cutting data for higher material removal rates where machine rigidity permits. Precise geometry and secure mounting for repeatable results Designed to the ISO turning insert standard, the triangular 60° geometry and 0.4 mm corner radius deliver a predictable cutting line and a controlled engagement with the workpiece, improving dimensional stability and surface finish. The insert features a cylindrical hole and a plate thickness of 4.76 mm, ensuring secure mounting in compatible holders; compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness. These standardised interfaces make tool changeover straightforward and support reproducible set-ups across different machines and fixtures. Effective chip control and simple handling to reduce downtime A double-sided chipbreaker provides dependable chip formation and evacuation for typical turning operations, helping maintain cutting stability and the quality of the machined surface. As an indexable insert, it permits rapid rotation or replacement of worn edges, limiting unproductive downtime and simplifying stock management. The insert’s balance of edge strength and wear behaviour supports a reliable process window, while modest corner radii help to protect the cutting edge during approach and exit, especially in applications with slight interruptions. Contact Metav Werkzeuge for detailed application advice, availability and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773920 SKU: 6773920-Tungaloy Manufacturer SKU: TUN6773920 Brand: Tungaloy Numbers / Core technical data Angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 0° Designs / Special features Designation: TNMG160404 Grade / coating: T9215 (CVD-coated carbide) Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Model series: ISO turning inserts FAQ Which materials is this insert best suited for? The TNMG160404 T9215 insert is optimised for medium steel; the T9215 grade provides a good balance of wear resistance and toughness for such applications. Is the insert indexable and reversible? Yes, the insert is indexable and designed with a double-sided chipbreaker so edges can be rotated or replaced to extend usable life. What holder compatibility should be considered? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO-standard geometry and cylindrical hole support secure mounting in matching ISO turning holders. Does the insert have a hole and what type is it? The insert includes a cylindrical mounting hole to ensure a stable connection with the clamping screw and seat. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Combine the CVD-coated carbide wear resistance of the T9215 grade with the precision of a 0.4 mm corner radius and ISO compatibility for consistent, productive turning results — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 160404 T9215 Turning Insert (ISO) — Tungaloy, CVD-coated carbide, 60° The TNMG160404 T9215 is an ISO-standard triangular indexable insert for external and internal turning, engineered for medium steel machining with a double-sided chipbreaker. CVD-coated carbide for wear resistance Designed for medium steel machining Double-sided chipbreaker, triangular 60° 0.4 mm corner radius for precision turning Durable grade for continuous productivity The T9215 grade combines a CVD-coated carbide structure with a formulation optimised for medium steel, delivering a balance between wear resistance and fracture toughness. This results in prolonged tool life under continuous to light interrupted cutting conditions, reducing changeover frequency and improving process stability. For production runs where consistent dimensions and predictable tool life matter, the material properties translate into fewer unscheduled stops and lower overall tooling costs while maintaining throughput. Geometry and chip control for precise surfaces The triangular 60° geometry and 0.4 mm corner radius ensure a compact, versatile cutting edge that excels in general turning tasks. The double-sided chipbreaker provides reliable chip formation and evacuation, which supports a stable cutting process and more consistent surface finish. The insert’s cylindrical hole and standard form enable secure clamping and repeatable positioning in compatible holders, contributing to dimensional accuracy and reduced setup variance across batches. Simple integration into ISO tool systems As an ISO-standard insert, this component integrates into existing tooling systems when the holder matches in form, relief angle, tolerance class, fastening and thickness. Compatibility is therefore a matter of matching mechanical and geometric parameters rather than brand, which simplifies inventory management and replacement strategies. The indexable nature of the insert offers two usable cutting edges per side, enabling economical usage and straightforward indexing during scheduled maintenance. Practical application guidance and selection tips For turning operations in medium steel, select the T9215 grade with the chipbreaker that best suits the workpiece stability and cut type; lighter, stable set-ups benefit most from the specified chip control, while more interrupted cuts may require adjustments in feed or a different breaker geometry. Consider coarse feeds for heavy stock removal and finer feeds for finish passes to exploit the 0.4 mm radius for dimensional control. When in doubt about holder compatibility or optimal cutting parameters, consult technical data sheets or contact a tooling specialist for tailored recommendations. For dependable medium-steel turning performance with the Tungaloy T9215 grade, contact Metav Werkzeuge for tailored selection advice and ordering support via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Manufacturer article number: 6944887 Manufacturer SKU: TUN6944887 SKU: 6944887-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Insert designation: TNMG160404 ISO code: 160404 Corner radius: 0.4 mm Relief angle: 0° Insert thickness: 4.76 mm Insert size: 16 Geometry angle: 60° Hole: cylindrical Special features Grade: T9215, CVD-coated carbide Application: turning, external and internal Double-sided chipbreaker Triangular, double-sided indexable insert ISO compatibility determined by form, relief angle, tolerance, fastening, size and thickness Suitable for medium steel, continuous to light interrupted cuts FAQ Is this insert compatible with my current ISO holders? Compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the TNMG160404 T9215 fits holders designed for 160404 ISO inserts when those parameters match. Which materials is the T9215 grade intended for? The T9215 grade is optimised for medium steel machining and performs best in continuous to light interrupted cuts typical of general turning operations. Can this insert be used for both external and internal turning? Yes, the TNMG160404 T9215 is suitable for external and internal turning when mounted in an appropriate ISO-compatible holder. Is the insert indexable and double-sided? The triangular TNMG insert is double-sided with a chipbreaker on each active face, allowing indexing to a fresh edge when required. What are the key dimensions to check before ordering? Check the corner radius (0.4 mm), insert thickness (4.76 mm), insert size (16), geometry angle (60°) and the ISO code (160404) to ensure compatibility with the toolholder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated T9215 grade with a 60° triangular geometry and a 0.4 mm corner radius, this insert offers a balanced mix of wear resistance and fracture toughness for medium-steel turning. The double-sided design and cylindrical hole permit economical tool cycles and stable clamping. Order the TNMG160404 insert directly via Metav Werkzeuge or contact our consultants for application-specific guidance. TNMG 160404 T9215 — ISO triangular turning insert by Tungaloy TNMG160404 T9215 is an ISO-standard triangular indexable insert designed for external and internal turning applications in medium-carbon steels. TNMG160404 geometry, 60° triangular insert CVD-coated carbide grade T9215 for medium steel 0.4 mm corner radius for accurate finishing Double-sided insert with cylindrical hole for stable clamping Increase throughput with a wear‑resistant, productive grade The T9215 grade is a CVD‑coated cemented carbide developed to balance wear resistance and fracture toughness, making it well suited to continuous and lightly interrupted turning in medium steels. This combination reduces flank wear and edge chipping under typical shop conditions, which translates into longer effective cutting lives and fewer tool changes. The result is measurable time savings on serial turning operations and more consistent part quality during long production runs. Secure clamping and economical tool cycles for reduced downtime The insert’s triangular shape with a 60° included angle and a cylindrical hole enables simple, repeatable clamping in standard ISO holders. With a double‑sided design and a thickness of 4.76 mm, two cutting edges are available per index, improving cost-efficiency per edge. The geometry details — 16 mm inscribed circle, 0° clearance angle and 0.4 mm corner radius — ensure reliable seat fit and predictable cutting engagement, which aids quick indexing and minimal set‑up time when replacing worn edges. Consistent surface finish and adaptable chip control Equipped with a double-sided chipbreaker and tailored for turning, the insert produces stable chip formation across a range of feeds and cutting speeds when matched with appropriate holders and parameters. For practical shop use, select the chipbreaker style and the T9215 grade to match the workpiece alloy and cutting mode; this supports repeatable surface quality and dimensional control. The carbide substrate and CVD coating together provide thermal stability at elevated cutting speeds, helping to keep tolerances within narrow limits and reducing rework. For recommendations on toolholder compatibility or cutting data for the Tungaloy TNMG160404 T9215 insert, contact Metav Werkzeuge for prompt technical support and local availability Technical data Article number: 6772313 Manufacturer SKU: TUN6772313 Our SKU: 6772313-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 Grade: T9215 Material: cemented carbide Coating: CVD-coated cemented carbide Application: Turning Core specifications Insert size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle (clearance): 0° Hole: with cylindrical hole Special features Triangular, double-sided indexable insert ISO-standard turning insert compatible with appropriate holders Double-sided chipbreaker for controlled chip flow Suited to external and internal turning of medium steels Grade combines wear resistance with fracture safety, suitable for continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The TNMG160404 T9215 indexable insert from Tungaloy is primarily specified for medium-carbon steel turning, where the T9215 grade provides a balance of wear resistance and toughness. How does the insert’s geometry affect machining results? The triangular 60° geometry and 0.4 mm corner radius promote stable cutting engagement and accurate finishing; the double‑sided design reduces tooling costs per edge for repetitive turning tasks. Is the TNMG160404 compatible with standard ISO toolholders? Yes. The insert conforms to ISO dimensions and is compatible with holders that match the insert form, relief angle, tolerance class, fixing style, size and thickness. Can this insert handle interrupted cuts? The T9215 grade is intended for continuous to slightly interrupted cutting; for heavily interrupted cuts, review holder rigidity and cutting parameters or consider alternative grades. What is the best way to replace and index the insert? Use the appropriate ISO holder with the matching seat and fastening system; the cylindrical hole and standard tolerances enable repeatable clamping and quick indexing to the next edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide abrasion resistance, a 0.4 mm corner radius for consistent surface quality, and a secure 60° clamping geometry to maintain productive turning cycles; order directly via Metav Werkzeuge or request expert consultation for integration advice. TNMG160404 T9215 — indexable turning insert for turning, CVD-coated carbide (Tungaloy) The TNMG160404 T9215 is a triangular ISO indexable insert designed for general turning applications, optimised for medium-steel machining where a balance of wear resistance and fracture toughness is required. ISO triangular insert, CVD-coated carbide 0.4 mm corner radius for precise profiles Double-sided chipbreaker for productive turning Cylindrical hole, 60° geometry for stable clamping High wear resistance that sustains productivity The CVD-coated carbide grade T9215 provides a combination of wear resistance and fracture strength that keeps tool life predictable in medium-steel operations. This coating system reduces flank wear at elevated cutting speeds and helps maintain dimensional accuracy across long runs. For production-focused shops the result is fewer index changes and more uptime; the insert therefore supports continuous to light interrupted cutting without frequent tool replacement. Where repeatability and consistent part quality matter, this material and grade deliver measurable process stability. Geometry and clamping designed for repeatable accuracy With a 0.4 mm corner radius and a 60° triangular geometry, the insert offers a controlled contact area that influences both surface finish and edge strength. The 0.4 mm radius softens the cutting edge to resist chipping while still allowing fine profile work; the triangular form ensures three usable edges per side when indexable. The cylindrical locating hole and a plate thickness of 4.76 mm contribute to secure seating in compatible toolholders, reducing vibration and runout. These geometric parameters combine to facilitate reproducible results on production lathes and driven tools. Controlled chip formation for safe, efficient turning The double-sided chipbreaker is engineered to manage chip flow in medium-steel turning, promoting short, controllable chips that evacuate reliably from the cutting zone. This reduces the risk of chip entanglement and improves coolant access to the cutting edge, which in turn aids thermal control and tool life. By selecting the correct chipbreaker and insert orientation in the toolholder, machinists can avoid secondary operations for chip trimming and keep cycle times consistent — a direct contribution to process efficiency. ISO compatibility and straightforward system integration As an ISO-format insert, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the TNMG160404 fits into standard TNMG toolholders when these parameters match. Typical system components include the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. The plate’s designation and thickness allow easy replacement within established tooling systems, simplifying stocking and planning. For users requiring rapid integration, the ISO standardisation reduces setup uncertainty and shortens time to production. Choose the Tungaloy TNMG160404 T9215 for reliable medium-steel turning—contact Metav Werkzeuge for application advice and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773959 SKU: 6773959-Tungaloy Manufacturer SKU: TUN6773959 Manufacturer article number: 6773959 Model series: ISO turning inserts Designation: TNMG160404 Grade: T9215 Dimensions & geometry Thickness: 4.76 mm Corner radius: 0.4 mm Angle: 60° Inscribed circle / size: 16 mm Free angle: 0° Materials & features Carbide substrate CVD coating: T9215 Double-sided chipbreaker Triangular plate Cylindrical hole ISO-standard insert Application: turning Target material: medium steel FAQ What materials is this insert best suited for? The TNMG160404 T9215 indexable turning insert (Tungaloy) is primarily intended for medium steel; the T9215 grade balances wear resistance and toughness for continuous to light interrupted turning operations. Can the insert handle interrupted cuts? Yes — the carbide substrate combined with the T9215 coating and robust geometry allows the insert to perform well in continuous and light interrupted cuts, though heavy interruptions may require a different grade or edge preparation. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius increases edge strength and reduces the tendency to chip, producing more consistent surface finishes while slightly influencing cutting forces compared with smaller radii. Is the insert reversible and how many cutting edges are available? The triangular TNMG form provides multiple usable edges; with a double-sided plate and correct indexing it is possible to use several edges before replacement, improving cost-efficiency per insert. Which holders are compatible with this TNMG insert? Compatibility depends on matching the insert form, free angle (0°), tolerance class, fastening and thickness; standard TNMG holders that accept a 16-size, 4.76 mm thick, cylindrical-hole triangular plate are suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and robust fracture toughness combined with ISO conformity for reliable turning performance; compatibility with standard 60° triangular holders ensures quick integration into existing tool systems. Order directly via Metav Werkzeuge or consult our specialists for application support. TNMG 160404 T9215 TNMG — Turning insert, 60° triangular, Tungaloy A TNMG160404 T9215 indexable turning insert designed for ISO-compliant external and internal turning, optimised for medium steel and continuous to lightly interrupted cuts CVD-coated carbide for high wear resistance 60° triangular form for standard ISO holders Nose radius 0.4 mm for precise finishes Double-sided chipbreaker for consistent chip control Faster, more productive turning with CVD-coated carbide The combination of CVD-coated carbide and a grade engineered for medium steel delivers high productivity and extended tool life under continuous and slightly interrupted cutting conditions. The CVD coating increases wear resistance without sacrificing toughness, reducing the frequency of index changes and minimising machine downtime. As an ISO-compliant triangular insert with a 60° included angle, it fits a broad range of standard external and internal turning holders; compatibility is determined by holder form, clearance angle, tolerance class, fixation method, size and thickness, so secure clamping and repeatable performance are ensured. Predictable surface quality and chip control for precision turning A 0.4 mm nose radius supports a fine surface finish while maintaining edge strength for medium-duty operations. The double-sided chipbreaker offers symmetrical cutting edges and dependable chip formation across both index positions, which helps stabilise temperatures and prolong edge life. The insert’s cylindrical hole enables positive, concentric clamping in many ISO-style seats; this contributes to consistent run-out and reproducible geometries in production. Where a smoother, high-accuracy finish is required, the modest nose radius and robust substrate combine to balance finish quality with resistance to edge chipping. System-level guidance for secure integration and consistent results In practical use the insert functions as part of a system: ISO turning insert, matching external holder or boring bar, appropriate clamp set and replacement screws. Selecting the correct chipbreaker and grade depends on workpiece material, cutting mode and machine stability — for medium steel the T9215 grade is a first choice thanks to its wear resistance and fracture safety. For interrupted cuts or unstable setups, choose holders and setups that improve rigidity and consider machining parameters that reduce shock to the cutting edge. For specialist applications or optimisation of cycle times and tool life, our technical consultants provide tailored recommendations. Contact Metav Werkzeuge for expert selection advice and to discuss the Tungaloy TNMG160404 T9215 insert for specific turning challenges — support by phone and e‑mail is available for process optimisation and compatibility checks Technical data Article number: 6773896 SKU: 6773896-Tungaloy Manufacturer SKU: TUN6773896 Name: TNMG160404 T9215 Tungaloy insert Core dimensions and values ISO designation: 160404 Included angle: 60° Nose radius: 0.4 mm Size: 16 mm Clearance angle: 0° Designs and special features Material: carbide Coating: T9215 (CVD-coated carbide) Shape: triangular, double-sided Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning Recommended for: medium steel Model series: ISO turning inserts FAQ What materials is this insert suitable for? The Tungaloy TNMG160404 T9215 insert is optimised for medium steel, with the CVD-coated carbide grade offering a balance of wear resistance and fracture toughness suited to continuous and lightly interrupted cuts. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius provides a finer surface finish while retaining sufficient edge strength; the radius helps achieve consistent part geometry during finishing passes with the chosen cutting parameters. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO triangular geometry (60°) and is compatible with standard holders that match the form, clearance angle, tolerance class, fixation method, size and thickness specified for ISO inserts. Can the chipbreaker handle interrupted cuts? The double-sided chipbreaker offers reliable chip control in continuous and lightly interrupted cuts; for heavy interruptions, increasing system rigidity and reviewing cutting data is recommended to maintain tool life. What components form the complete tooling system? A complete system includes the ISO insert, a compatible external holder or boring bar, an underlay/clamp set and replacement screws; correct combination ensures secure clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9215 Wendeplatten - Tungaloy
Benefit from the high wear resistance and fracture toughness of the T9215 CVD-coated carbide grade for productive turning in medium steels; order the TNMG160404 insert via Metav Werkzeuge or consult our specialists for application guidance. TNMG160404 T9215 – indexable turning insert, CVD-coated carbide by Tungaloy, 60° triangle TNMG160404 T9215 is an ISO-format indexable insert for turning applications, optimised for medium steel and suited to continuous and light interrupted cuts in production environments CVD-coated carbide T9215 Triangular 60° geometry 0.4 mm nose radius Double-sided chipbreaker Consistent productivity through robust coating and grade selection The combination of a CVD-coated carbide substrate and the T9215 grade delivers a high level of wear resistance without compromising toughness. This balance is designed to maintain cutting-edge performance during longer production runs and when handling slight interruptions in the cut. The result is fewer insert changes and more stable cycle times, which supports predictable throughput in turning operations. Geometry that simplifies insert selection and clamping compatibility A 60° triangular format with a 0.4 mm nose radius offers versatility across a range of external and internal turning tasks. The insert is manufactured to ISO dimensions, so compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The central cylindrical hole enables reliable clamping and repeatable seating in ISO-style toolholders, helping to reduce setup variability and ensure repeatable parts quality. Designed for medium steel — productivity where it matters The grade is described for the medium steel machining spectrum and is especially effective when productivity and tool life are required simultaneously. The double-sided chipbreaker provides two usable cutting edges per face, improving economics per insert and assisting chip control during continuous and lightly interrupted cutting. For process engineers, this means lower tooling cost per component and more consistent surface finish on turned parts. Practical integration and choice guidance for production workshops When selecting this insert for a specific application, consider the machining strategy: choose a chipbreaker and grade that match the workpiece material, machining stability and feed rates. The insert’s nominal 4.76 mm thickness and ISO designation ensure it fits established clamping systems and replacement procedures. For customers seeking straightforward integration, pairing the insert with a matching external holder, backing shim and correct fastening hardware completes an efficient system for reliable turning. For reliable, production-ready performance choose the Tungaloy TNMG160404 T9215 — contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6772305 Manufacturer SKU: TUN6772305 SKU: 6772305-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Geometry angle: 60° Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Coating/grade: T9215 (CVD-coated carbide) Typical application: turning (external and internal) Recommended for: medium steel machining, continuous to light interrupted cuts Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What is the main application for this insert? The insert is intended for turning operations; the TNMG160404 T9215 is specified for external and internal turning in medium steels, handling continuous to lightly interrupted cuts. How does the T9215 grade affect tool life? Tungaloy’s T9215 CVD-coated grade combines wear resistance with good fracture toughness, which extends tool life under steady production conditions and reduces unplanned index changes. Can this insert be used in standard ISO holders? Yes, the ISO-format TNMG160404 insert fits standard ISO toolholders when matched for form, clearance, tolerance class, fastening, size and thickness and when a suitable backing shim and screw are used. Is the chip control suitable for long turning passes? The double-sided chipbreaker supports consistent chip formation during continuous turning, improving surface finish and process stability over extended passes. What nose radius is available and what does it mean for surface finish? The insert has a 0.4 mm nose radius, offering a good compromise between edge strength and the ability to achieve fine surface finishes on turned components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade that balances toughness and wear resistance for medium to heavy steel turning; the insert’s ISO geometry and 60° triangular form ensure broad compatibility with standard holders. Order directly via Metav Werkzeuge or consult our technical team for holder matching and process optimisation. TNMG160404 160404 T9225 — Turning insert (ISO, CVD-coated) by Tungaloy TNMG160404 T9225 Tungaloy turning insert for ISO-standard external and internal turning, designed for medium to heavy steel machining with intermittent cuts and variable engagement. Robust CVD-coated carbide grade T9225 ISO 60° triangular geometry for broad compatibility Double-sided chipbreaker for consistent chip control Cylindrical hole and 4.76 mm thickness for secure clamping Efficient performance for medium to heavy steel turning The insert delivers a balance of toughness and wear resistance thanks to the CVD-coated carbide grade T9225, made for applications with variable engagement and occasional interruptions. This results in fewer edge failures and longer effective tool life, which in turn reduces downtime and tooling costs. The 60° triangle geometry provides economical indexing and versatile cutting angles, helping to sustain a stable process across a wide range of turning tasks. Compatibility and secure mounting reduce set-up time Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The ISO-standard format and the cylindrical hole permit straightforward mounting in matched external holders or boring bars, while the 4.76 mm plate thickness and 16 mm inscribed circle ensure reliable clamping and repeatable seating. Specifying matching shims and clamping sets streamlines set-up and minimises rework between insert changes. Practical design that improves chip control and surface finish The insert features a double-sided chipbreaker, optimised for medium to heavy turning, which shapes chips consistently and reduces the risk of snarling in boring operations. Stable chip formation supports a better surface finish and lowers the probability of workpiece damage during interrupted cuts. The modest corner radius (0.4 mm) offers a compromise between edge strength and the ability to achieve fine surface qualities where required. System approach and recommended use cases Treat the insert as part of a system: the insert, a matched external holder or boring bar, an appropriate underlay/clamping kit and replacement screws. Use the grade for turning steel in production and repair environments where engagement conditions vary or where slightly interrupted cuts demand additional toughness. When high precision or specific tolerances are required, pair the insert with holders certified to the same ISO tolerance classes for predictable results. Contact Metav Werkzeuge for tailored holder recommendations, batch availability and application advice for the Tungaloy TNMG160404 T9225 insert — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6781359 Manufacturer SKU: TUN6781359 SKU: 6781359-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Thickness: 4.76 mm Inscribed circle (size): 16 mm Corner radius: 0.4 mm Geometry angle: 60° Clearance angle: 0° Hole style: cylindrical Special features Material: carbide Coating: CVD-coated Grade: T9225 — universal, robust Chipbreaker: double-sided Plate form: triangular, ISO TNMG Intended application: turning (external and internal) Compatibility notes: determined by form, clearance, tolerance class, clamping, size and thickness Typical system components: insert, external holder or boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert suited for? The Tungaloy TNMG160404 T9225 is intended primarily for steel machining and performs well in medium to heavy turning where variable engagement or interrupted cuts demand toughness. How does the CVD coating benefit cutting performance? The CVD-coated carbide surface increases wear resistance and protects the cutting edge under cyclic loads, helping the TNMG160404 maintain cutting stability and extend time between indexings. Can this insert be used for internal and external turning? Yes — the triangular ISO geometry and cylindrical hole allow mounting in compatible external holders or boring bars for both external and internal turning operations. What does the 0° clearance angle mean in practice? A 0° clearance angle indicates a neutral relief suited to certain holder geometries; correct holder selection and seating are crucial to ensure proper cutting edge clearance and repeatable results. How many cutting edges are available per insert? The triangular form with double-sided chipbreaker provides multiple indexable cutting edges; index and reclamp according to the holder’s recommended procedure for safe re-use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and a double-sided chipbreaker for stable, productive steel turning; the robust geometry and ISO conformity ensure predictable tool life and interchangeability. Order the TNMG160404 T9225 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for tailored specifications. TNMG 160404 T9225 TNMG160404 Turning Insert by Tungaloy — CVD-coated carbide, 0.4 mm corner radius The TNMG160404 T9225 is an ISO triangular indexable insert designed for medium to heavy turning operations, providing a balance of toughness and wear resistance for varied engagement conditions. ISO triangular insert TNMG form CVD-coated carbide grade T9225 Double-sided chipbreaker for stable cuts 0.4 mm corner radius for versatile profiles Higher throughput with robust cutting performance The combination of CVD-coated carbide and the T9225 grade delivers increased toughness for interrupted cuts and varying feed conditions, resulting in a more consistent metal-removal rate. The insert’s double-sided chipbreaker promotes controlled chip formation and reduces vibration, which leads to improved surface finish and fewer unplanned tool changes. As an ISO-compliant indexable insert, it supports predictable repeatability when paired with matching holders, so machining cycles run with greater uptime and predictable quality. Easy integration into common tool systems and versatile geometry Designed as a triangular ISO insert, the part features a 0.4 mm corner radius, a nominal 16 mm inscribed circle and a 4.76 mm thickness, with a cylindrical hole for secure fastening. The 60° shape and a 0° clearance angle allow straightforward seat and orientation in standard external holders or boring bars; compatibility is determined by form, clearance angle, tolerance class, fastening and thickness. This clear system approach simplifies tool inventory and reduces setup time, while the reversible geometry extends indexable life per insert. Reliable economy through fewer set‑ups and longer edge life The insert’s wear-resistant coating and robust substrate aim to reduce the frequency of regrinds and replacements, producing a favourable cost-per-cut in medium to heavy steel machining. The universal character of the grade makes it suitable across varying stability conditions, lowering the need for multiple specialised grades. In production environments where process stability and repeatability matter, this solution contributes to reduced downtime and a steadier output quality; the TNMG160404 is therefore well suited to workshops seeking dependable, repeatable performance. Contact Metav Werkzeuge for application advice on the Tungaloy TNMG160404 insert and compatible holders — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and ordering support Technical Data Article number: 6781369 Manufacturer SKU: TUN6781369 SKU: 6781369-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Shape angle: 60° Clearance angle: 0° Manufacturer article number: 6781369 Special features CVD-coated carbide grade T9225 Triangular insert (TNMG form) Double-sided chipbreaker Cylindrical hole for fastening ISO-standard indexable plate for turning Intended application: turning, external and internal operations Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suitable for? The TNMG160404 T9225 insert is formulated as a robust universal grade and is particularly suited to machining steel in medium to heavy operations; the T9225 CVD-coated carbide balances wear resistance and toughness. How does the double-sided chipbreaker affect performance? A double-sided chipbreaker on the indexable plate encourages stable chip control in varying cutting conditions, improving surface finish and reducing the risk of built-up edge when using the TNMG160404 in heavier or interrupted cuts. Which holders are compatible with this triangular insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method and plate thickness; standard holders that accept TNMG-form ISO inserts and accommodate a 4.76 mm thickness will accept the TNMG160404. How many indexing positions are available with this geometry? The triangular TNMG shape provides three cutting edges per side and typically offers multiple indexing positions due to its reversible design, extending usable life before replacement. What are the identifying codes to order this insert? Order using the designation TNMG160404 T9225 and manufacturer article number 6781369 or SKU 6781369-Tungaloy to ensure the correct CVD-coated grade and geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Benefit from a robust CVD-coated cemented carbide grade and a compact 60° triangle form that deliver stable performance in medium-to-heavy steel turning; select the matching chipbreaker for interrupted cuts and order the insert directly via Metav Werkzeuge or consult our advisors if guidance is required. TNMG160404 T9225 — ISO turning insert for Turning by Tungaloy The TNMG160404 T9225 is an ISO-standard turning insert engineered for medium-to-heavy steel turning, offering a universal, tough grade for variable cutting conditions. TNMG geometry, 60° triangle insert CVD-coated cemented carbide for robustness Suitable for medium to heavy steel turning Double-sided chipbreaker with cylindrical hole Stable cutting performance for interrupted and heavy cuts The combination of a CVD-coated surface and a cemented carbide substrate gives this insert high wear resistance while retaining the toughness required for interrupted cuts. The triangular 60° geometry converts to a compact, rigid cutting edge that supports deeper cuts with reduced vibration, which in turn helps maintain dimensional accuracy and extends tool life. The double-sided chipbreaker enables economical indexing, providing multiple cutting edges before replacement and reducing set-up frequency for continuous production. Designed compatibility and process security This ISO-format insert is made to fit a wide range of holders when the holder’s form, relief angle, tolerance class, clamping method, size and thickness match. The neutral 0° relief angle and the central cylindrical hole support secure, repeatable clamping, improving process stability in batch or single-piece flow. For mixed-production environments, the T9225 grade balances wear resistance and toughness, making it a practical choice when facing variable workpiece grades or slightly interrupted machining. Practical handling and integration on the machine shop floor With a cutting-edge radius of 0.4 mm and a plate thickness of 4.76 mm, the insert offers a clear compromise between strength and surface finish capability; the modest corner radius helps achieve consistent surface integrity on steel components. The triangular form and the central hole simplify orientation and fast clamping, while the ISO standard ensures straightforward replacement in existing toolholders. For optimal results, pair the insert with a holder and clamp set that match the insert’s dimensions and tolerance class, and select the chipbreaker profile to suit feed and material for improved chip control. For ordering, technical matching or application advice regarding the Tungaloy TNMG160404 T9225, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide practical guidance for reliable production integration Technical data Article number: 6780791 SKU: 6780791-Tungaloy Manufacturer SKU: TUN6780791 Model series: ISO turning inserts Material: cemented carbide Coating: CVD-coated cemented carbide Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features Triangular plate form Cylindrical central hole Double-sided chipbreaker Robust universal grade T9225 for medium–heavy steel turning Compatibility depends on holder form, clearance, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The TNMG160404 T9225 insert is specified for medium to heavy steel turning and performs well under slightly interrupted cutting conditions. How many usable cutting edges does the insert provide? Due to its triangular geometry and double-sided configuration, the insert offers six usable cutting edges before replacement. What coating and substrate does the insert use? The insert uses a CVD-coated finish on a cemented carbide substrate, combining wear resistance with toughness. How should the holder be selected for this insert? Holder compatibility is determined by the holder’s form, relief angle, tolerance class, clamping method, size and thickness; ensure these match the insert’s specifications for secure clamping. Is the TNMG160404 T9225 reversible? Yes, the double-sided chipbreaker design allows indexing and reversal to use the additional cutting edges, improving economy in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated cemented carbide and the resilient T9225 grade for dependable performance in medium to heavy steel turning. The ISO TNMG 160404 geometry with a 60° cutting angle and 0.4 mm corner radius ensures stable chip formation and predictable edge life. Order the TNMG160404 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 T9225 – Turning insert (ISO, Tungaloy) The TNMG160404 T9225 is an indexable turning insert designed for medium to heavy steel machining; its triangular ISO form and CVD-coated cemented carbide construction provide both toughness and wear resistance CVD-coated cemented carbide for robustness ISO TNMG 160404 geometry, 60° cutting angle 0.4 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole Maximised metal removal with consistent edge life The combination of CVD-coated surface and cemented carbide substrate delivers a balance of wear resistance and toughness that supports extended running times under varying cutting conditions. CVD coating (chemical vapour deposition) forms a hard, wear-resistant layer that reduces flank and crater wear while the substrate maintains fracture resistance. This results in more reproducible tool life and fewer unscheduled insert changes, improving overall machining throughput and lowering unit costs. Easy integration into standard ISO tool systems Thanks to the ISO-compliant triangular form and the cylindrical hole for secure fastening, the insert is straightforward to mount in a wide range of external holders and boring bars. The indexable design and double-sided chipbreaker mean multiple cutting edges are available before replacement is required, which minimises downtime. Compatibility with the clamping system is governed by insert form, relief angle and tolerance class; selecting the correct holder and correct fastening hardware ensures reliable seating and repeatable positional accuracy. Grade selection for interrupted and heavy cuts The T9225 grade is formulated as a robust universal solution for varying engagement conditions and slightly interrupted cuts, offering good toughness for medium to heavy steel machining. The double-sided chipbreaker promotes stable chip control across a range of feeds and depths of cut, reducing the risk of built-up edge and improving surface finish. Choosing this grade supports a broad material coverage while preserving cutting-edge integrity where conditions fluctuate. Precision geometry that enhances surface finish and process security The 60° cutting angle combined with a 0.4 mm corner radius and a 4.76 mm plate thickness provides a compromise between edge strength and form accuracy that favours consistent workpiece quality. The triangular shape yields three indexable edges per side, while the double-sided configuration increases the number of usable edges overall, offering cost efficiency. For optimal results, match the chipbreaker and grade to the workpiece material and machine rigidity to benefit from predictable chip flow and reduced rework. For reliable medium-to-heavy steel turning with Tungaloy CVD-coated grades, contact Metav Werkzeuge for stock availability and technical advice — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6780766 Manufacturer SKU: TUN6780766 Brand: Tungaloy Model: TNMG160404 T9225 Numbers / Core technical data Cutting angle: 60° Thickness: 4.76 mm Plate size: 16 mm Corner radius: 0.4 mm Relief angle: 0° Designs / Special features CVD-coated cemented carbide Triangular insert with cylindrical hole Double-sided chipbreaker ISO-compliant indexable insert For medium to heavy steel turning FAQ What materials is this insert suitable for? The TNMG160404 Tungaloy insert (T9225 grade) is optimised for medium to heavy steel machining and performs well under varying engagement conditions. Can the insert handle interrupted cuts? Yes, the T9225 grade is designed for robustness and extra toughness, making the TNMG160404 suitable for slightly interrupted cuts and fluctuating cutting forces. How is the insert mounted in a holder? The triangular ISO form and cylindrical hole allow secure fastening in compatible external holders and boring bars; correct holder selection is essential for repeatable positioning. How many usable edges does the insert provide? The triangular, double-sided design offers multiple indexable edges—each indexing operation presents a fresh cutting edge, extending service life compared with single-sided inserts. What does the CVD coating do for performance? The CVD coating on the cemented carbide substrate increases wear resistance, reduces flank and crater wear, and supports consistent edge life in demanding steel machining tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated cemented carbide grade and ISO conformity for consistent productivity in medium to heavy steel turning; order the TNMG160404 T9225 insert directly via Metav Werkzeuge or ask our consultants for advice on compatible holders and clamping solutions. TNMG 160404 T9225 — ISO turning insert, CVD‑coated carbide, 0.4 mm corner radius — Tungaloy TNMG 160404 T9225 is an ISO‑format turning insert for medium to heavy steel turning, designed as a triangular, double‑sided plate with a cylindrical locating hole for secure clamping in ISO holders. CVD‑coated cemented carbide grade T9225 Universal grade for medium to heavy steel turning Triangular insert with cylindrical hole 0.4 mm corner radius for fine finishing Reliable performance under variable cutting conditions The CVD‑coated cemented carbide grade delivers a balance of toughness and wear resistance that suits interrupted cuts and changing engagement conditions. As an ISO turning insert, this plate offers repeatable geometry and predictable life, reducing downtime caused by frequent index changes. The hardened coating improves edge stability at higher temperatures, while the substrate core maintains fracture resistance under heavier radial depths of cut, supporting stable production across mixed‑batch work. Consistent chip control and surface quality Equipped with a double‑sided chipbreaker and a defined 0.4 mm corner radius, the insert assists in producing uniform chips and reproducible surface finishes. The chipbreaker geometry is optimised for steel applications, helping to avoid built‑up edge and to channel swarf away from the cutting zone. For operations where surface integrity matters, the combination of chip control and a small corner radius aids in achieving the required tolerance and finish without sacrificing feed or speed. Simplified handling and holder compatibility The triangular form with a cylindrical locating hole ensures straightforward clamping and interchangeability with ISO‑compliant toolholders. Compatibility is determined by insert shape, relief angle, tolerance class, clamping and size — factors that make integration into existing tool inventories simple. Standardised dimensions reduce set‑up time and permit rapid indexing, which contributes to higher machine utilisation and lower process variability. Productivity focused grade for steel machining The T9225 grade is intended as a robust, universal choice for medium to heavy steel turning, offering a compromise between wear resistance and toughness. This makes the insert particularly suitable where cutting conditions can fluctuate or where occasional interruptions and variable feeds occur. The result is improved process reliability, fewer unexpected edge failures and more predictable replacement intervals, all of which support cost‑effective machining cycles. Contact Metav Werkzeuge for tailored advice on matching holders, availability of TNMG 160404 T9225 by Tungaloy, and recommendations for optimised cutting parameters Technical data Article number: 6780776 Manufacturer SKU: TUN6780776 Dealer SKU: 6780776-Tungaloy Model series: ISO turning indexable inserts Insert designation: TNMG160404 Facts Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Insert size: 16 mm Locating style: with cylindrical hole Special features Grade: T9225, CVD‑coated cemented carbide Plate shape: triangular, double‑sided Chipbreaker: double‑sided for steel Application: turning (external and internal) Compatibility: determined by form, relief angle, tolerance, clamping, size and thickness Typical use: medium to heavy steel machining FAQ What materials is this insert suited for? The TNMG160404 T9225 insert is formulated for medium to heavy steel machining; the CVD coating and carbide substrate balance wear resistance and toughness for these materials. Can the insert be used for interrupted cuts? Yes. The T9225 grade and the insert geometry provide sufficient toughness for interrupted cuts and variable engagement, reducing edge chipping risk. How is the insert secured in the holder? The triangular insert features a cylindrical locating hole and standard ISO geometry, so it is clamped in compatible ISO toolholders using the appropriate backing and clamping set. Is this insert reversible or single‑sided? The plate is double‑sided, allowing indexing to alternate edges and extending usable life before replacement. Which product code should be referenced when ordering? Reference article number 6780776 or manufacturer SKU TUN6780776 for the TNMG160404 T9225 insert to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a 0.4 mm nose radius and precise ISO compatibility for dependable medium to heavy-duty turning. Order directly via Metav Werkzeuge or contact the technical team for application-specific advice. TNMG160404 160404 T9225 turning insert by Tungaloy — robust CVD-coated carbide for steel turning a TNMG160404 T9225 indexable insert designed for external and internal turning in medium to heavy steel applications CVD-coated carbide grade T9225 Triangular TNMG form, 60° cutting edge 0.4 mm nose radius for versatile profiles Double-sided chipbreaker for consistent chips Consistent cutting performance for medium to heavy turning The combination of CVD-coated surface treatment and a tough carbide substrate delivers a durable cutting edge suited to variable engagement and slightly interrupted cuts. The T9225 grade is formulated for steel machining where a balance of wear resistance and toughness is required, so tool life remains predictable under mixed conditions. This translates into fewer insert changes and a steadier production flow, supporting efficiency goals on batch and continuous turning operations. Guaranteed fit and repeatable accuracy with ISO form Manufactured to the ISO TNMG form, the insert ensures compatibility with standard external holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness match. The insert’s 60° included angle and 0° relief are critical dimensions to check against the clamping system; correct pairing avoids misalignment and enables repeatable geometries. Specifying the appropriate holder and shim will maintain concentricity and surface finish, reducing rework and scrap. Better chip control and longer edge life reduce downtime A double-sided chipbreaker supports reliable chip formation across a range of feeds and depths, improving evacuation and reducing the risk of built-up edge. Being indexable on both sides allows economical use of the cutting geometry, extending effective life per insert. Stable chip control improves surface quality and lowers the frequency of machine stops for manual clearing, which contributes directly to productivity and lower total machining cost. Practical application notes and system components The triangular geometry with a central cylindrical hole provides secure clamping with common TNMG holders; the 0.4 mm nose radius suits finishing passes and moderate profile features without compromising strength. Typical system setup comprises an ISO turning insert, a matching external holder or boring bar, a locating pad or clamping set and replacement screws. For interrupted cuts or less rigid set-ups, the toughness of the T9225 grade helps absorb shock while maintaining a reliable edge. For hands-on selection support and to order genuine Tungaloy TNMG160404 inserts, contact Metav Werkzeuge — technical enquiries: info@metav-werkzeuge.com, phone +49 2822 7131930 — specialists are available to advise on holder compatibility and optimal chipbreaker selection. Technical data Article number: 6796093 Manufacturer SKU: TUN6796093 SKU: 6796093-Tungaloy Name: TNMG160404 T9225 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Nose radius: 0.4 mm Insert size: 16 Included angle: 60° Relief angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Material type: carbide Special features CVD-coated carbide grade T9225 Triangular TNMG form Compatible with ISO turning holders Robust universal grade for medium to heavy steel machining Designed for variable engagement and slightly interrupted cuts FAQ What materials is this insert best suited to machine? The TNMG160404 T9225 insert is optimised for steel machining and offers a broad coverage for medium to heavy turning tasks thanks to its CVD-coated T9225 carbide composition. How does the 0.4 mm nose radius affect component finish? A 0.4 mm nose radius provides a good compromise between profile accuracy and edge strength, enabling fine surface finishes while still resisting wear in typical turning operations. Is the insert reversible and how many cutting edges are available? This TNMG form is double-sided with a chipbreaker on both faces, allowing multiple indexing positions and extending the usable life of each insert. Which holder features must match to ensure correct clamping? Compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness — check the holder accepts TNMG inserts with a 60° included angle and a cylindrical centre hole. Can this insert handle interrupted cuts? The T9225 grade offers enhanced toughness suitable for slightly interrupted cuts, making the insert a reliable choice where varying engagement occurs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and an ISO-standard triangular design for robust medium to heavy steel turning; order directly via Metav Werkzeuge or request guidance from the technical team. TNMG 160404 T9225 turning insert for turning operations — Tungaloy TNMG 160404 T9225 is a triangular, ISO‑standard turning insert designed for external and internal turning in workshop and production environments, offering a robust universal grade for variable cutting conditions. ISO‑standard triangular insert CVD‑coated carbide T9225 grade Double‑sided chipbreaker for flexibility Suited to medium to heavy steel turning Consistent metal removal for medium to heavy turning The T9225 grade combines a CVD‑coated carbide construction with a formulation optimised for toughness, delivering reliable performance when cuts are interrupted or process conditions vary. As an ISO‑standard triangular insert, it ensures repeatable seating and orientation in compatible toolholders, which supports predictable tool life and reduces set‑up time. The practical consequence is a more stable machining cycle and fewer unplanned tool changes, improving net productivity in batch and single‑piece production. Engineered geometry for process reliability With a 0.4 mm corner radius and a 60° cutting edge angle, the insert offers a balanced compromise between strength and edge engagement for roughing and semi‑finishing passes. The double‑sided chipbreaker geometry assists chip control over a range of feed rates and steels, lowering the risk of built‑up edge and helping maintain surface finish. The 0° relief angle and cylindrical hole ensure consistent clamping and minimal variation across insert indexes, which simplifies tool‑holder selection and reduces assembly checks. Practical advantages for workshop integration The insert is manufactured in carbide and supplied in the ISO series compatible with standard holders; this eases inventory management and replacement routines. Its triangular form and double indexability extend the effective cutting length per insert, thereby improving cost efficiency per machining hour. The design suits both external and internal turning tasks and, when matched with the correct holder and cutting parameters, supports higher material removal rates with maintained dimensional control. For availability and application advice on the Tungaloy TNMG 160404 T9225 turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and stock information. Technical Data Article number: 6944814 Manufacturer SKU: TUN6944814 Label: TNMG160404 T9225 Tungaloy-Wendeplatte Core data Corner radius: 0.4 mm Inscribed circle: 16 mm Thickness: 4.76 mm Cutting edge angle: 60° Relief angle: 0° With hole: cylindrical Special features Material: carbide Coating: CVD Grade: T9225 Series: ISO turning inserts Shape: triangular Chipbreaker: double-sided Application: turning (external and internal) Compatibility depends on shape, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The Tungaloy TNMG 160404 T9225 turning insert is a robust universal grade primarily suited to medium to heavy steel machining and performs well under variable engagement conditions. How is chip control handled with this insert? Chip control is provided by the double‑sided chipbreaker geometry on the TNMG 160404 T9225, which improves evacuation across a range of feeds and cutting depths for more consistent surface quality. Is this insert compatible with standard ISO holders? Yes; the TNMG160404 format conforms to the ISO turning insert series and is compatible with holders that match form, clearance, tolerance class, fastening, size and thickness. What coating and substrate does the insert use? The insert uses a CVD‑coated carbide substrate in the T9225 grade, combining wear resistance and toughness for interrupted and stable cuts. What is the supplier SKU for ordering? The supplier SKU for this item is TUN6944814 and the article number is 6944814 for order reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade engineered for medium to heavy steel turning, paired with a compact 0.4 mm nose radius and triangular geometry for versatile cutting. Benefit from ISO compatibility across standard holders and the practicality of a double-sided chipbreaker for cost-efficient production — order directly via Metav Werkzeuge or consult our experts for application advice. TNMG 160404 T9225 turning insert (ISO) — Tungaloy, CVD-coated carbide, 0.4 mm radius The TNMG160404 T9225 is an ISO-standard indexable turning insert designed for external and internal turning applications, offering a robust universal grade for changing engagement conditions and lightly interrupted cuts. CVD-coated carbide for extended tool life Robust universal grade T9225 for steel machining Triangular 16 mm insert, 60° geometry 0.4 mm nose radius, double-sided chipbreaker Consistent performance for medium to heavy steel turning The combination of a CVD coating and carbide substrate delivers improved wear resistance and a reliable cutting edge under variable cutting conditions. The T9225 grade is formulated as a robust universal option for steel machining, providing a balance of toughness and wear resistance that suits interrupted cuts or situations with fluctuating engagement. This results in fewer indexings and a steadier production rhythm, supporting predictable cycle times and reduced downtime. ISO compatibility simplifies toolset management As an ISO-standard insert, the geometry and dimensions follow established norms, so compatibility with external holders and boring bars is determined by insert form, clearance angle, tolerance class, fastening and thickness. The insert’s triangular shape and cylindrical hole allow straightforward seating in common ISO clamping systems. In practice, a complete system typically consists of the indexable insert, a suitable external holder or boring bar, a backing shim/clamp set and spare fixing screws for quick replacement and consistent clamping force. Geometry and chip control for surface quality and economy The 0.4 mm nose radius and 60° included angle yield a controlled contact zone that helps maintain surface finish while allowing higher feed options when appropriate. The double-sided chipbreaker design increases usable edges per insert and improves stable chip formation, reducing the risk of inconsistent chips that can harm surface quality or necessitate manual chip control. Thicker inserts and stable clamping contribute to vibration resistance, which in turn supports repeatable part quality. Practical benefits: fewer tool changes, predictable uptime Using a double-sided, triangular indexable insert reduces tooling costs per edge and simplifies inventory by favouring a versatile shape across multiple operations. The CVD-coated carbide surface enhances flank wear resistance on steels, extending edge life and improving the cost-per-component ratio. For shop-floor planning, this insert supports efficient tool change routines and steady output, making it suitable for both batch production and continuous turning tasks. For tailored advice on integrating Tungaloy TNMG160404 T9225 inserts into production and to request availability through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780743 SKU: 6780743-Tungaloy Manufacturer SKU: TUN6780743 Designation: TNMG160404 Grade: T9225 Material: carbide Core specifications Nose radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Clearance angle: 0° Special features Triangular shape Cylindrical hole Double-sided chipbreaker CVD coating Robust universal grade T9225 Suitable for turning applications ISO-standard indexable insert Compatible with external holders, boring bars, shim/clamp set and spare screws FAQ What materials is this insert designed for? The Tungaloy TNMG160404 T9225 insert is intended primarily for steel machining, with the T9225 grade offering robustness for medium to heavy operations and variable engagement conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and will fit matching holders provided the form, clearance angle, tolerance class, fastening method, size and thickness correspond to the holder specification. How many usable cutting edges does the insert provide? Thanks to the double-sided chipbreaker and triangular geometry, the insert provides multiple indexable edges, improving economy per edge compared with single-sided solutions. What are the key benefits of the CVD coating on this insert? The CVD coating enhances wear resistance and helps maintain a stable cutting edge when machining steels, which supports longer tool life and more consistent surface finishes. Can this insert be used for interrupted cuts? Yes, the T9225 grade is formulated to offer increased toughness, making the insert suitable for lightly interrupted cuts and conditions where engagement varies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the compact 60° triangle geometry for stable, repeatable turning. The combination of a 0.4 mm nose radius and a robust chipbreaker gives reliable form accuracy and consistent edge life under intermittent cuts. Order the insert directly via Metav Werkzeuge or contact the consultants for cutting-application advice. TNMG 160404 T9225 indexable insert for turning — Tungaloy (0.4 mm radius, 60°) The TNMG160404 T9225 is an ISO-standard triangular indexable insert designed for external and internal turning in medium to heavy steel machining, offering a balance of toughness and wear resistance. CVD-coated carbide for robust performance Triangle 60° geometry for versatile turning 0.4 mm nose radius for fine profiling Double-sided insert with cylindrical hole Stable cutting performance for interrupted and mixed cuts The CVD-coated carbide grade T9225 is a universal, toughness-oriented specification that is engineered for medium to heavy steel machining. Its coating enhances thermal stability at the cutting edge while the substrate delivers resistance to chipping under variable engagement. As a result, shorter machining cycles and fewer indexings are achievable, which improves output consistency and reduces unplanned machine downtime. The combination of coating and substrate is selected to extend useful tool life while keeping costs per workpiece predictable. Geometry and chip control that support repeatable surfaces A 60° triangle form with a 0.4 mm nose radius provides a good compromise between profile detail and edge strength; this geometry is well suited to fine contours and general turning operations. The double-sided chipbreaker enables controlled chip formation across a range of depths of cut, reducing the need for frequent parameter adjustments. Compatibility with holders is determined by insert form, relief angle, tolerance class, fixing method, size and thickness, so the insert is intended to be used as part of a complete system consisting of an ISO insert, suitable external holder or boring bar, clamping pad and replacement screws. Robust dimensions and handling for productive setups With a plate thickness of 4.76 mm and a nominal size of 16, the insert provides sufficient stiffness for heavier cuts while still allowing economical indexing. The cylindrical locating hole simplifies positioning during clamping and supports stable seat contact. Thanks to its two usable cutting edges per side, inventory efficiency is increased and regrinding intervals are reduced. The coated surface also supports predictable wear patterns, which helps to plan tool-change intervals and maintain surface-quality targets over production runs. Practical selection and integration advice When choosing the correct grade and chipbreaker, match the T9225 grade to steels and mixed-operation conditions that require extra toughness, particularly where interrupted cutting or varying engagement occurs. For finishing or high-speed applications, select lighter chipformers and review the toolholder geometry to maintain required free clearance. The system approach—insert, holder, clamp and fasteners—ensures repeatable seating and torque behaviour; documentation of holder form and clamp type is recommended before procurement to verify fit. For supply, technical matching and rapid delivery options, contact Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and process parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780706 SKU: 6780706-Tungaloy Manufacturer SKU: TUN6780706 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TNMG160404 Grade/coating: T9225 (CVD-coated carbide) Application: turning Geometry: triangle, 60° Nose radius: 0.4 mm Thickness: 4.76 mm Size: 16 Hole: with hole — cylindrical hole Special features Double-sided chipbreaker Compatible with ISO external holders and boring bars Robust universal grade for medium to heavy steel machining System composition: insert + holder + clamping pad + replacement screws FAQ What materials is this insert best suited for? The TNMG160404 T9225 is optimised for medium to heavy steel machining where toughness is required, particularly for variable engagement and lightly interrupted cuts. How does the T9225 coating affect tool life? The T9225 CVD coating increases thermal and abrasive resistance at the cutting edge, which helps to sustain cutting performance and extend the interval between indexings. Can this insert be used for internal as well as external turning? Yes; the triangular indexable insert geometry and cylindrical locating hole make it suitable for both external and internal turning when paired with the correct holder or boring bar. How many cutting edges are available per insert? The insert is double-sided with a triangular profile, providing multiple usable edges and improving inventory efficiency for production runs. What should be checked for holder compatibility? Compatibility is determined by insert form, relief angle (0° in this case), tolerance class, fixing method, size and thickness; confirm holder seat dimensions and clamp style before assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness and a 60° triangular ISO form that delivers consistent performance in medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404 T9225 — ISO turning insert for turning, CVD-coated carbide, Tungaloy The TNMG160404 T9225 is an ISO-indexable triangular insert engineered for medium-to-heavy steel turning, offering robust cutting performance and reliable chip control for demanding workshop operations. ISO triangular 60° insert TNMG 160404 CVD-coated carbide grade T9225 Double-sided chipbreaker for stable cuts 0.4 mm corner radius for reliable edge life Increased cutting stability for variable cutting conditions The CVD-coated carbide composition and the T9225 grade combine to provide a balance of wear resistance and toughness that is particularly suited to medium-to-heavy steel machining. The CVD-coated carbide surface reduces abrasive wear and helps maintain cutting-edge geometry over longer cycles, while the substrate toughness helps absorb shocks during slightly interrupted cuts. This results in improved process consistency and fewer unplanned tool changes, which supports higher overall productivity in batch and single-piece production alike. Compatibility with the toolholder is determined by insert form, relief angle, tolerance class, fastening, size and thickness, ensuring predictable integration into standard ISO turning systems. Practical gains for workshop throughput and surface quality A double-sided chipbreaker design offers practical advantages: enhanced chip control reduces re-cutting, stabilises cutting forces and contributes to a better surface finish on the component. The triangular geometry with a 60° included angle and a 0.4 mm corner radius supports both external and internal turning tasks, giving flexibility across a range of part diameters and edge requirements. Reduced downtimes for tool changeover and simple indexability mean the machining cell benefits from consistent cycle times, while the chipforming geometry eases chip evacuation in typical turning setups, improving operator safety and machine cleanliness. Robust grade and simple system integration for reliable results The robust universal grade is designed for application where changing engagement or light interruptions demand enhanced edge strength and repeatable performance. The insert’s triangular shape and the inclusion of a cylindrical locating hole ensure secure clamping and positional accuracy when assembled with a matching external holder, shim and clamp set. For users transitioning between workpiece materials or adjusting cutting data, the ISO indexable format simplifies reconditioning: replacing or indexing the insert restores original geometry without adjusting the holder. The result is a cost-effective approach to maintaining precision and minimising process variation during turning operations. Contact Metav Werkzeuge for tailored application support on the Tungaloy TNMG160404 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for specific recommendations and compatibility checks. Technical data Article number: 6780839 SKU: 6780839-Tungaloy Manufacturer SKU: TUN6780839 Series: ISO-Drehwendeschneidplatten Material: Carbide Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 60° Relief angle: 0° Special features Grade: T9225 (robust universal grade) Coating: CVD-coated carbide Shape: triangular, with cylindrical hole Chipbreaker: double-sided Application: external and internal turning System requirements: ISO insert, matching holder, shim and clamp FAQ What materials is this insert designed for? The TNMG160404 T9225 insert is specified for medium-to-heavy steel turning applications and is well suited to varying engagement and lightly interrupted cuts. How does the T9225 grade affect tool life? The T9225 grade combines wear resistance and toughness; the CVD-coated carbide helps to extend edge retention and maintain performance under demanding cutting conditions. Is the insert compatible with standard ISO holders? Yes, the TNMG160404 follows ISO indexable insert standards; compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness with the chosen holder. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control, stabilises cutting forces and contributes to a more consistent surface finish during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a 0.4 mm nose radius for robust, repeatable turning performance in medium to heavy steel machining; the ISO format ensures straightforward integration into existing tool systems. Order the TNMG160404 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404 T9225 ISO triangular turning insert by Tungaloy — CVD-coated carbide, 0.4 mm radius TNMG160404 T9225 is an ISO-standard triangular indexable insert designed for turning applications in varied steel machining contexts, optimised for interchangeability with ISO holders and reliable performance under interrupted cuts. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Triangle form, 60° cutting angle 0.4 mm nose radius for reliable finish Consistent tool life under mixed and interrupted cuts The T9225 grade combines a CVD coating with a robust carbide substrate to deliver balanced wear resistance and toughness. This composition is geared towards medium to heavy steel machining where cutting conditions can vary or include light interruptions; the coating improves thermal stability and reduces flank wear, while the substrate maintains edge integrity when encounterÂing variable loads. The outcome is a more predictable tool life and fewer unscheduled insert changes, supporting continuous production. Geometry that stabilises surface quality and process control A 0.4 mm nose radius and a triangle form with a 60° included angle offer a well-defined cutting edge geometry that helps maintain dimensional consistency and surface finish. The cylindrical hole and standard thickness allow secure clamping in ISO-compatible holders, reducing vibration and promoting stable chip formation. These characteristics translate into improved part tolerances and a consistent finish even when switching between workpiece batches or operators. System compatibility and economical use of cutting edges Delivered in an ISO format, the insert integrates into typical systems comprising an ISO insert seat, matching external holder or boring bar, and standard clamp sets and screws. The double-sided chipbreaker design provides two usable edges per side, enabling economical indexing and reducing inventory complexity. For production environments, this means lower tooling costs per component and faster turnarounds during tool changes without compromising process stability. For reliable medium-to-heavy steel turning, choose the Tungaloy TNMG160404 T9225 insert — contact Metav Werkzeuge for technical advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780845 Manufacturer SKU: TUN6780845 Our SKU: 6780845-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Cutting angle: 60° Nose radius: 0.4 mm Hole style: cylindrical hole Special features Grade: T9225 Coating: CVD Material: carbide Chipbreaker: double-sided Clearance angle: 0° Application: Turning Compatibility: ISO holders and boring bars FAQ What materials is this insert intended for? The Tungaloy TNMG160404 T9225 insert is formulated primarily for steel machining, especially medium to heavy tasks where a balance of wear resistance and toughness is required. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions and fits holders and boring bars that accept TNMG 160404 geometry, provided the holder matches form, clearance, tolerance class, fastening and thickness. How does the CVD coating benefit machining? The CVD coating on the T9225 grade improves thermal resistance and reduces adhesion and flank wear, which helps maintain edge condition and extends effective cutting life under higher temperatures typical of heavy cuts. Can the chipbreaker handle interrupted cuts? The double-sided chipbreaker and robust substrate make the insert suitable for applications with light interruptions; its combination of toughness and chip control helps avoid premature chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise 0.4 mm nose radius and ISO compatibility for consistent medium to heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 160404 T9225 — Turning indexable insert by Tungaloy, CVD-coated carbide, 0.4 mm radius A TNMG160404 T9225 triangular indexable insert for ISO-spec turning, designed as a robust universal grade for medium to heavy steel machining. CVD-coated carbide T9225 for robust steel turning Triangular TNMG form with 60° cutting angle 0.4 mm nose radius for precise profiling Double-sided chipbreaker with cylindrical hole Consistent edge life through CVD-coated carbide technology The CVD-coated carbide composition of this insert combines a wear-resistant coating with a tough substrate, delivering a balance between hardness and fracture resistance. As a T9225 universal grade, it is intended for medium to heavy steel cutting where variable cutting forces or lightly interrupted cuts demand additional toughness. The coating improves abrasion resistance at higher temperatures while the cemented carbide core maintains edge stability, so the tool life is extended and change intervals are more predictable — a clear advantage for batch production and mixed-run shop floors. Geometry optimised for turning accuracy and predictable results The insert’s triangular TNMG geometry provides a 60° main cutting angle that is standard for many external and internal turning operations, giving reliable approach angles and fixture options. The specified 0.4 mm nose radius supports fine profile work and repeatable surface finishes while still permitting adequate strength at the cutting edge. The plate is supplied with a cylindrical hole, enabling secure clamping in ISO holders; overall compatibility depends on the insert form, clearance angle, tolerance class, attachment method, size and thickness. This standardisation simplifies tool inventory and reduces setup time across different machines. Productivity benefits from chip control and plate reversibility Equipped with a double-sided chipbreaker, the insert offers two cutting edges per indexation, improving uptime and cost-efficiency per edge. The chipbreaker design supports stable chip formation on typical steel grades, contributing to consistent surface quality and reduced risk of edge damage under variable conditions. For turning lines where throughput and repeatability matter, this combination of geometry and chip control increases productivity while maintaining acceptable surface integrity. Practical selection and shop-floor handling tips As an ISO-standard turning insert, the component integrates into common holder systems; selection of the correct chipbreaker and grade should match the workpiece material, the machining strategy and the machine-tool rigidity. For roughing heavy sections choose the robust grade and a chipbreaker suited to large volume removal; for finishing, the smaller nose radius and refined chip control yield better surface results. System components typically include an appropriate external holder or boring bar, a shim/clamp set and replacement screws — ensure holder compatibility by checking form, clearance angle and tolerance class before installation. Contact Metav Werkzeuge for tailored advice on Tungaloy TNMG160404 T9225 inserts and fast, reliable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right chipbreaker and holder combination for the application Technical data Article number: 6944888 Manufacturer item no.: 6944888 SKU: 6944888-Tungaloy Manufacturer SKU: TUN6944888 Model series: ISO turning indexable inserts Material: carbide Coating: CVD Application: Turning Numbers / Core data Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Hole: cylindrical Plate form: triangular Special features Double-sided chipbreaker ISO-standard indexable insert Robust universal grade for medium to heavy steel Compatible with ISO holders depending on form and tolerance Suitable for external and internal turning Supplied with cylindrical hole for secure clamping FAQ Which materials is this insert best suited for? The TNMG160404 T9225 insert from Tungaloy is designed as a robust universal grade for medium to heavy steel machining and copes well with variable engagement conditions and light interruptions. What does the designation 160404 indicate for the geometry? The code refers to the ISO geometry: 16 mm inscribed circle, 04 edge length relating to the insert family and a 0.4 mm corner radius; this helps in selecting matching ISO holders and clamping systems. Is the insert reversible and how many cutting edges are available? This triangular TNMG plate is double-sided with a chipbreaker, offering two usable cutting edges per side and therefore multiple indexations before replacement. How is holder compatibility ensured for this indexable insert? Compatibility depends on the insert form, clearance angle, tolerance class, attachment method, size and thickness; the TNMG160404 conforms to ISO specifications and fits matching ISO holders and boring bars when these parameters align. What advantage does the T9225 grade provide compared with other grades? The T9225 CVD-coated grade balances wear resistance and toughness, providing stable chip formation and good edge life in medium to heavy steel turning, particularly when cuts are variable or lightly interrupted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Proven combination of a CVD-coated carbide grade and a 60° triangular geometry delivers stable mid-to-heavy steel turning with predictable chip control and long edge life; order the insert via Metav Werkzeuge or request specialist advice from the consultants at Metav Werkzeuge. TNMG 160404 T9225 Turning insert (ISO) — Tungaloy A TNMG160404 T9225 ISO triangular turning insert engineered for medium to heavy steel turning, offering robust CVD-coated carbide and a double-sided chipbreaker for variable engagement and intermittent cuts ISO triangular insert TNMG 160404 T9225 CVD-coated carbide for robust performance Double-sided chipbreaker for reliable chip control 60° geometry with 0.4 mm corner radius Stable machining and improved process reliability The T9225 grade is a CVD-coated carbide developed for robust universal performance in medium to heavy steel machining. The combination of coating and substrate provides increased toughness where intermittent cuts or fluctuating engagement occur, helping to avoid premature edge chipping. The integrated double-sided chipbreaker supports consistent chip control, reducing manual intervention at the machine, which contributes directly to improved spindle uptime and more predictable cycle times. The consequence is a more stable production flow and fewer unplanned tool changes. Geometry that supports accuracy and economical indexing The ISO triangular form with a 60° included angle and a 0.4 mm corner radius gives a balanced cutting profile suitable for turning shoulders, roughing passes and general finishing where small radii are required. The insert thickness of 4.76 mm and the cylindrical mounting hole ensure secure clamping in compatible holders; this enables repeatable positioning and reliable cutting edge registration when the insert is indexed. The reversible nature of a triangular, double-sided insert means multiple usable edges per index, improving cost-efficiency per cutting edge while maintaining dimensional accuracy across repeated cycles. Compatibility, system setup and application scope Compatibility with toolholders depends on form, relief angle, tolerance class, fastening and size; the indexable insert requires a matching ISO holder, appropriate underlay/clamping set and the correct replacement screws to complete the system. The TNMG family is intended for both external and internal turning; select the chipbreaker and grade according to workpiece stability and the specific machining task. When flexibility and reliability are priorities, this insert performs well in interrupted cuts and varying cut depths, offering a combination of tool life and process security that supports higher productivity targets. Contact Metav Werkzeuge for expert selection of the TNMG160404 T9225 insert and to confirm holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate advice and availability Technical Data Article number: 6780818 Manufacturer SKU: TUN6780818 Our SKU: 6780818-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160404 Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Special features Carbide, CVD coating Triangular insert, double-sided chipbreaker Cylindrical mounting hole ISO-compatible indexable insert System: insert, holder, shim/clamping set, replacement screws FAQ What materials is the TNMG160404 T9225 suited for? The TNMG160404 T9225 insert is designed primarily for medium to heavy steel machining where intermittent cuts or variable engagement demand a tougher carbide grade. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides consistent chip formation and control on each indexed edge, which helps maintain stable cutting conditions and reduces manual chip handling. Can the insert be used in any ISO TNMG holder? The insert follows ISO TNMG dimensions, but compatibility depends on holder form, relief angle, tolerance class and fastening; confirm holder specifications before use. What does the 0° relief angle imply for setup? A 0° relief angle indicates a neutral clearance geometry; holders designed for this relief are required to ensure correct cutting clearance and edge engagement. How many cutting edges are available per insert index? As a triangular, double-sided insert, multiple edges can be indexed; the exact number of usable edges depends on the chosen turning strategy and wear criteria. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Robust CVD-coated T9225 grade combined with ISO geometry and a 0.4 mm corner radius ensures dependable performance in medium-to-heavy steel turning; order through Metav Werkzeuge or request application advice from our consultants for correct holder matching. TNMG160404 T9225 — ISO triangular turning insert, CVD-coated cemented carbide by Tungaloy, 60° geometry The TNMG160404 T9225 is an ISO-standard triangular turning insert intended for medium-to-heavy steel machining, offering a tough, CVD-coated cemented carbide grade for interrupted cuts and variable engagement conditions. CVD-coated cemented carbide grade T9225 Triangular ISO insert, 60° cutting geometry 0.4 mm corner radius for versatile turning Double-sided chipbreaker for medium to heavy cuts Compatible with ISO holders; centre hole cylindrical Increased productivity through a tough coated grade The combination of a CVD-coated surface and cemented carbide substrate delivers enhanced wear resistance and thermal stability, translating into longer tool life and fewer tool changes. The T9225 grade is engineered for robustness in demanding steel applications, so productivity gains arise from consistent cutting performance under varying engagement and intermittent cutting. For workshops seeking measurable process stability, this geometry supports steady feed rates and reduced cycle-time variance. Precise fit and geometry for reliable mounting The insert follows ISO-standard dimensions with a 60° included angle and an inscribed circle of 16 mm, making it compatible with a wide range of ISO holders when the form, relief, tolerance class, clamping and thickness are matched. The plate thickness of 4.76 mm and 0° relief ensure a rigid support in the pocket, while the 0.4 mm corner radius balances edge strength and profile accuracy. Mounting is via a cylindrical hole, which eases alignment and repeatability in production setups. Stable chip control for consistent surface quality A double-sided chipbreaker designed for medium to heavy cuts promotes stable chip formation and evacuation, reducing chatter and supporting a reliable surface finish. The insert’s toughness makes it particularly suitable for slightly interrupted cuts or variable depth of cut scenarios, where brittle grades might fail. The result is fewer unexpected tool failures and more predictable component quality, an advantage for shops aiming to reduce rework and scrap. Simple integration and economical operation As an ISO-format turning insert, the part integrates smoothly into existing toolholder systems provided the holder matches the insert form and dimensions. The overall effect is an economical solution: fewer insert replacements due to increased wear resistance, less machine downtime and improved process repeatability. Technical matching and selection of the correct chipbreaker and grade for a specific steel or operation can be provided by the supplier to ensure optimal cutting data and setup. Select the Tungaloy TNMG160404 T9225 insert for robust medium-to-heavy steel turning and contact Metav Werkzeuge for holder compatibility and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780951 Manufacturer SKU: TUN6780951 Label / Name: TNMG160404 T9225 Tungaloy turning insert Facts Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 16 mm Relief angle: 0° Included angle: 60° Manufacturer article number: 6780951 Design and features Material: cemented carbide Coating: CVD Grade: T9225 Shape: triangular (60°) Chipbreaker: double-sided Mounting: with cylindrical hole Application: turning Model series: ISO turning inserts FAQ What materials is this insert suitable for? The TNMG160404 T9225 insert is designed primarily for steel machining; the T9225 grade provides toughness for medium-to-heavy steel operations and variable cutting conditions. Can the insert handle interrupted cuts? Yes. The T9225 grade and robust geometry make this insert well suited to slightly interrupted cuts and changing engagement, offering increased resistance to chipping. How does the chipbreaker affect surface finish? The double-sided chipbreaker promotes stable chip control during medium to heavy cuts, which helps maintain consistent surface quality and reduces the likelihood of built-in stresses affecting the finished part. What mounting features ensure repeatable positioning? Repeatable mounting is achieved via the cylindrical hole and standard ISO dimensions (16 mm inscribed circle, 4.76 mm thickness), enabling exact seating in compatible toolholders. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; when those match the insert’s ISO specifications, the TNMG160404 T9225 integrates directly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade and a double-sided chipbreaker for reliable medium-to-heavy steel turning; the robust T9225 grade ensures consistent edge life under varying engagement conditions. Order the insert directly via Metav Werkzeuge or request technical advice from our consultants for smooth integration into existing tool systems. TNMG160404 T9225 indexable insert for turning — Tungaloy The TNMG160404 T9225 is an ISO triangular indexable insert designed for external and internal turning applications, offering a 60° geometry and a 0.4 mm corner radius for versatile steel machining. ISO triangular insert TNMG 160404 CVD-coated cemented carbide grade T9225 Double-sided chipbreaker for stable cutting 60° geometry with cylindrical centre hole Stable chip control improves productivity and reduces rework The CVD-coated surface and cemented carbide substrate combine to provide a balanced wear resistance and toughness, which is particularly useful in mixed or interrupted cuts. The integrated chipbreaker is engineered to control swarf formation, promoting steady evacuation and reducing the risk of recutting. For production contexts where cycle time and surface quality matter, this results in fewer tool changes and more predictable component quality. Compatibility with holders and system components for straightforward integration Compatibility is governed by several attributes: insert shape, clearance angle, tolerance class, mounting method, size and thickness. The triangular form with a cylindrical centre hole matches common ISO holders and clamping systems; correct matching of the holder and any shims or clamp set ensures secure seating and repeatable positioning. The system approach—insert, holder, underlay and screws—minimises setup time and helps maintain process stability across batches. Material and grade selection tailored for steel turning The T9225 grade is a robust universal variant tailored for medium-to-heavy steel turning where variable engagement and occasional interrupted cuts demand enhanced toughness. The CVD coating adds a hard, wear-resistant layer that improves flank and crater wear behaviour while the carbide core preserves edge strength. For shops aiming to balance tool life and cutting performance across a range of steels, this grade offers consistent results without frequent requalification. Geometry and micro‑features that support consistent surface finish A 60° triangle geometry offers versatility for both external profiling and internal turning when combined with the appropriate holder. The 0.4 mm corner radius delivers a compromise between edge strength and fine surface finish, suitable for typical turning tolerances. Where surface finish or dimensional accuracy is critical, pairing this insert with optimised feed and speed settings will exploit its geometry and coating to reduce vibration and improve repeatability. For reliable medium-to-heavy turning operations, contact Metav Werkzeuge to source the Tungaloy TNMG160404 T9225 insert and receive tailored application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 6780771-Tungaloy Manufacturer SKU: TUN6780771 Manufacturer article number: 6780771 Model series: ISO indexable inserts Designation: TNMG160404 T9225 Tungaloy indexable insert Facts Geometry angle: 60° Corner radius: 0.4 mm Size: 16 mm Clearance angle: 0° Centre hole: cylindrical Chipbreaker: double-sided Special features Material: cemented carbide Grade/coating: T9225, CVD-coated Application: turning Shape: triangular With hole: yes (cylindrical) System components: compatible with matching holder, underlay/shim, clamp set and screws FAQ What materials is this insert suitable for? The TNMG160404 T9225 insert is intended primarily for medium-to-heavy steel turning and performs well under varying engagement conditions where toughness is required. How does the chipbreaker support continuous production? The double-sided chipbreaker on the TNMG160404 Tungaloy insert promotes controlled swarf formation and evacuation, helping to maintain stable cutting conditions and reduce downtime for chip-related issues. What are the key geometric specifications to check for holder compatibility? Check the 60° geometry, clearance angle (0°), insert size (16 mm) and the cylindrical centre hole; these attributes determine whether the insert seats correctly in the chosen holder. What does the T9225 grade offer compared with generic grades? T9225 is a robust, universal CVD-coated grade developed for enhanced toughness and consistent wear resistance in steel turning, offering a balance of edge life and process reliability for mixed cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com