TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9225 and the ISO‑compliant geometry for consistent performance in medium to heavy steel turning; the double‑sided chipbreaker and secure cylindrical hole ensure stable clamping and economical indexing. Order directly via Metav Werkzeuge or consult our specialists for application support. TNMG160404 T9225 – ISO turning insert for steel turning by Tungaloy, 60° triangle The TNMG160404 T9225 is a triangular ISO turning insert designed for external and internal turning of steels, offering a robust universal grade and a secure, cylindrical‑hole clamping option for stable machining. CVD‑coated carbide T9225 grade Robust for medium to heavy steel machining Double‑sided chipbreaker for process stability ISO triangular insert, 60° included angle Consistent cutting performance under variable conditions The combination of a CVD‑coated carbide substrate and the T9225 grade provides increased toughness and wear resistance for medium to heavy steel operations. This geometry is intended to manage slightly interrupted cuts and changing engagement without a marked loss in edge life, which translates into fewer tool changes and steadier cycle times. The protective coating reduces flank wear and helps maintain dimensional accuracy over longer runs, delivering predictable productivity for batch and serial production alike. Simple integration into ISO tool systems for reduced setup time Designed as an ISO‑normed turning insert, compatibility with holders depends on form, clearance angle, tolerance class, fastening and size. The 0° rake specification and triangular form make selection and mounting straightforward when matching to standard external holders or boring bars. Clear identification of the grade and chipbreaker geometry simplifies tool assignment and reduces set‑up errors, enabling faster changeovers and consistent clamping repeatability in shopfloor conditions. Stable chip control and economical indexing for improved throughput The double‑sided chipbreaker enhances chip formation across a range of cutting parameters, supporting safer evacuation and reduced rework. The triangular shape combined with the cylindrical hole provides secure retention and offers multiple indexable cutting edges, increasing the number of usable corners per insert and lowering cost per edge. The 60° included angle yields versatile engagement for both finishing and semi‑roughing passes, improving surface quality while maintaining effective metal removal rates. Contact Metav Werkzeuge for tailored cutting recommendations, application charts and to confirm the right TNMG160404 T9225 variant for specific steel grades and machining conditions. Technical Data Article number: 6796047 Manufacturer SKU: TUN6796047 SKU: 6796047-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Insert size: 16 mm Included angle: 60° Rake angle: 0° Manufacturer article number: 6796047 Special features CVD‑coated carbide (T9225 grade) Double‑sided chipbreaker Triangular insert, with cylindrical hole ISO turning insert, compatible with standard holders Suitable for turning (external and internal) FAQ Which materials is this insert suitable for? The TNMG160404 T9225 insert is optimised for steel machining, particularly medium to heavy operations where toughness and stable chip control are required. Is the grade suitable for interrupted cuts? Yes, the T9225 grade is a robust universal grade designed to cope with variable engagement and slightly interrupted cuts while maintaining edge life. How is the insert secured in the holder? This triangular insert features a cylindrical hole for positive clamping; compatibility is determined by holder form, fastening method and tolerance class. How does the chipbreaker affect surface finish? The double‑sided chipbreaker promotes reliable chip formation and evacuation, which supports a consistent surface finish and reduces the risk of chip recontact. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with the robust TNMG geometry delivers stable chip control, consistent edge life and reliable performance for medium-to-heavy steel turning; order originals via Metav Werkzeuge or request tailored machining data from our consultants. TNMG 160404 T9225 Turning Insert — ISO triangular insert, CVD-coated carbide | Tungaloy TNMG160404 T9225 is an ISO-form indexable turning insert optimised for medium-to-heavy steel machining, offering a tough CVD-coated carbide grade and a 0.4 mm corner radius for robust, repeatable cutting performance CVD-coated carbide T9225 for toughness Optimised chip control, double-sided breaker 60° TNMG triangle form for reliable clamping 0.4 mm corner radius for robust profiles Improved uptime through consistent chip control The CVD coating of the T9225 grade combines wear resistance with maintained toughness, which reduces edge wear under fluctuating engagement conditions. In practice this means fewer tool changes and more consistent component quality when machining steel in medium-to-heavy duty operations. The double-sided chipbreaker provides controlled chip formation over a range of feeds, so the cutting process remains stable even with slight interruptions or variable material batches. Choosing a coated carbide grade that balances hardness and toughness is a rational step towards lower cost-per-part and higher machine uptime. Geometry that suits demanding turning tasks The triangular TNMG form with a 60° included angle and a 0° relief configuration gives predictable mechanical clamping and straightforward seat alignment in ISO-compatible holders. The 0.4 mm corner radius supports robust profile work and improves resistance to edge chipping at higher depths of cut, while the cylindrical hole ensures secure fastening. These geometrical attributes translate into stable cutting conditions and reduced risk of vibration-induced wear. Selecting the correct chipbreaker and grade according to workpiece stability and machining strategy enables efficient material removal and consistent surface quality. Easy integration and data-driven application support As an ISO indexable insert, the TNMG160404 fits standard external holders, boring bars and clamping kits; compatibility is defined by form, clearance angle, tolerance class, attachment method, size and thickness. The insert is supplied in a system-ready format, allowing quick replacement and minimal setup time when matched to the correct toolholder. For complex or critical jobs, Metav Werkzeuge can supply cutting parameters and practical recommendations for feed, speed and depth of cut to suit the Tungaloy CVD-coated carbide grade. This practical support helps translate technical features into measurable productivity gains on the shop floor. Request original Tungaloy TNMG inserts or a cutting-parameter sheet from Metav Werkzeuge to ensure process reliability for medium-to-heavy steel turning — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780949 SKU: 6780949-Tungaloy Manufacturer SKU: TUN6780949 Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Included angle: 60° Relief/clearance angle: 0° Insert size: 16 mm Hole: with cylindrical hole Special features CVD-coated carbide grade T9225 Triangular insert, TNMG form Double-sided chipbreaker Designed for medium-to-heavy steel turning ISO-standard geometry and system compatibility FAQ What materials is this insert best suited for? The TNMG160404 T9225 insert by Tungaloy (SKU 6780949-Tungaloy) is optimised for medium-to-heavy steel turning where toughness and reliable chip control are required. Can the insert handle interrupted cuts? Yes. The T9225 grade is a robust universal grade with increased toughness, making it suitable for applications with changing engagement or light interruptions. How is holder compatibility determined? Compatibility depends on insert form, clearance angle, tolerance class, attachment method, size and thickness; the TNMG triangle form and 60° included angle require ISO-compatible holders designed for TNMG inserts. What does the CVD coating provide? The CVD coating offers improved wear resistance and thermal stability, extending edge life while maintaining the toughness needed for heavier-section steel machining. How many usable edges are available on the insert? The insert is double-sided; consult the manufacturer’s datasheet or Metav Werkzeuge for the exact count of indexable edges for this TNMG geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm corner radius for precise turning, and a double-sided chipbreaker for reliable chip control; order the TNMG160404 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160404 T9225 triangular indexable insert for Turning by Tungaloy – CVD-coated carbide, 0.4 mm radius The TNMG160404 T9225 is an ISO-standard triangular indexable insert designed for external and internal turning applications, offering a robust universal grade for medium to heavy steel machining. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Triangular shape with 0.4 mm corner radius Double-sided chipbreaker, central cylindrical hole Maximise machining stability and tool life with a tough, coated grade The CVD-coated T9225 carbide grade combines wear resistance with increased toughness to meet varying engagement conditions and lightly interrupted cuts. As a robust universal solution, the grade is formulated to maintain edge stability under load, reducing flank wear and extending usable life. The combination of coating and substrate results in consistent performance across a broad range of steels, which translates into fewer insert changes and improved process reliability when turning demanding batches. ISO compatibility reduces setup uncertainty and saves time Manufactured to ISO dimensions and tolerances, this triangular insert ensures predictable fit and secure clamping in compatible holders. The triangular geometry with a central cylindrical hole and a thickness of 4.76 mm provides reliable seat location and repeatability; the 60° included angle and 0° clearance angle fit standard holder families. Clear specification of form, rake angle and tolerance class supports quick selection of a matching external holder or boring bar, lowering setup times and minimizing unexpected tool changes. Improved chip control and surface quality in steel turning The double-sided chipbreaker is engineered to deliver controlled chip formation during a wide range of turning conditions, helping to avoid entangling or long stringy chips. Predictable chip flow decreases the risk of workpiece damage and optimises coolant access, which often leads to a superior surface finish and reduced secondary operations. For operators less familiar with chipbreaker design, this means more consistent parts and fewer interruptions for chip handling or manual intervention. Practical application guidance for reliable results Choose the chipbreaker and grade to match the workpiece material, type of cut and the machine–workpiece–toolset stability. The insert is particularly appropriate where interrupted cuts or variable engagement demand extra toughness rather than the highest possible hardness. When combined with a correctly specified holder and clamping set, the system—ISO insert, holder, shim and clamp—delivers repeatable performance and simplifies inventory management across turning operations. For bespoke process recommendations, detailed specifications are available on request. For robust, repeatable steel turning with proven edge stability, specify the Tungaloy TNMG160404 T9225 insert and contact Metav Werkzeuge for tailored advice and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for further technical support and availability. Technical Data Article number: 6781245 SKU: 6781245-Tungaloy Manufacturer SKU: TUN6781245 Material: carbide Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Clearance angle: 0° Special features Grade/coating: T9225, CVD-coated carbide Shape: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) System: ISO insert requiring matching holder, shim and clamp FAQ What materials is this insert best suited for? The Tungaloy TNMG160404 T9225 insert is intended primarily for medium to heavy steel machining where a combination of wear resistance and toughness is required. Is the insert reversible or indexable? This triangular indexable insert is double-sided, allowing rotation to a fresh cutting edge and offering economical use of the insert body. What are the key dimensions to check when selecting a holder? Verify the insert size (16 mm inscribed circle), thickness (4.76 mm), hole style (cylindrical) and the ISO designation TNMG160404 to ensure correct fit and clamping with the chosen holder. How does the chipbreaker affect machining performance? The double-sided chipbreaker improves chip control across a range of feeds and depths of cut, which supports stable cutting, reduced rework and better surface finish during turning operations. Can this insert handle interrupted cuts? Yes, the T9225 grade offers increased toughness and is suitable for conditions with light interruptions or variable engagement that require a robust edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9235) toughness, an efficient double-sided chipbreaker, and ISO compatibility for reliable turning in unstable conditions; order supply or request application advice from Metav Werkzeuge. TNMG160404 T9235 — Tungaloy indexable insert for turning, CVD-coated carbide, 0.4 mm radius A TNMG160404 T9235 indexable turning insert engineered for external and internal turning applications, optimised for steel machining under interrupted or unstable cutting conditions. ISO 160404 triangle form for standard holders CVD-coated carbide T9235 for steel applications Double-sided chipbreaker for interrupted cuts 0.4 mm corner radius for general finishing Increase process reliability in steel turning The combination of CVD-coated carbide and the T9235 grade delivers a balance of toughness and wear resistance that suits lower cutting speeds and interrupted cuts. As an indexable insert, the geometry provides repeatable seating and consistent edge position, which reduces set-up time and supports stable cycle times. The double-sided chipbreaker controls chip formation even when conditions vary, decreasing the risk of workpiece damage and tool-related stoppages. This focus on predictable performance helps maintain throughput and reduces the need for unscheduled tool changes. Simple integration with ISO-standard holders and compact clamping systems Compatibility is determined by form, relief, tolerance, fastening, size and thickness; the ISO 160404 designation ensures fit with matching toolholders. The insert features a 0° relief angle, a 4.76 mm thickness and a cylindrical hole, enabling secure clamping and correct seat support in many common external toolholders and boring bars. Clear specification of these parameters simplifies tool selection and minimises trial-and-error during tool set-up, improving machine utilisation and reducing fixture-related rejects. Robust edge geometry for interrupted and unstable setups With a 0.4 mm corner radius and a triangular plate form, the insert delivers a compromise between edge strength and surface finish. The TNMG160404 T9235 grade is designed to withstand shock loads from interrupted cuts and to perform where rigidity is limited. The CVD coating contributes to thermal stability at the cutting edge, while the chipbreaker design aids consistent chip evacuation. For workshops seeking dependable results on steel components, this insert offers measurable gains in cycle consistency and tool life without requiring complex process changes. Contact Metav Werkzeuge for supply and application support on the TNMG160404 T9235 insert — technical consultation and fast delivery options are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785995 Manufacturer SKU: TUN6785995 SKU: 6785995-Tungaloy Model series: ISO indexable turning inserts Designation: TNMG160404 Facts ISO code: 160404 Shape: triangular, 60° included angle Corner radius: 0.4 mm Thickness: 4.76 mm Size: 16 mm Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Material: carbide Coating/grade: T9235, CVD-coated Application: turning (external and internal) Best for: steel, unstable conditions, interrupted cuts Compatibility: ISO-standard holders (form, tolerance, fastening) FAQ What applications suit this insert best? The TNMG160404 T9235 insert is intended for external and internal turning of steel, especially under interrupted cutting or less rigid set-ups. Is the insert compatible with standard ISO holders? Yes — the ISO 160404 designation and its triangular form ensure compatibility with matching ISO holders when form, tolerance and fastening correspond. How does the T9235 grade perform compared with other grades? The T9235 grade provides increased toughness and thermal stability due to its CVD-coated carbide composition, making it suitable for lower cutting speeds and unstable machining conditions. What does the double-sided chipbreaker deliver in daily operation? The double-sided chipbreaker supports consistent chip control across index rotations, helping to avoid chip-related interruptions and improving edge life during interrupted cuts. What are the key geometric parameters to check when selecting a holder? Attention should be paid to the ISO code (160404), relief angle (0°), thickness (4.76 mm), plate size (16 mm) and hole style (cylindrical) to guarantee proper seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade designed for toughness with the 60° triangular ISO geometry and a 0.4 mm corner radius results in reliable performance for external and internal turning under interrupted or unstable conditions. Benefit from a double-sided chipbreaker that extends usable life and reduces tooling costs. Order or request application advice via Metav Werkzeuge for a rapid, production-oriented solution. TNMG 160404 T9235 — turning insert by Tungaloy, CVD-coated carbide, 60° triangle TNMG160404 T9235 indexable insert for turning, engineered for steel machining where toughness and chip control are required CVD-coated carbide grade T9235 60° triangular ISO geometry 0.4 mm corner radius for accuracy Double-sided chipbreaker with cylindrical hole Robust grade for unstable and interrupted cutting The insert uses a CVD-coated carbide substrate in grade T9235, a formulation developed for toughness rather than maximum speed. This makes the component particularly suitable when machining steel at reduced cutting speeds, or where the process is prone to vibration and intermittent cuts. The tough grade helps resist chipping at the cutting edge, which translates into fewer insert changes and more continuous production. In practical terms, this reduces downtime and helps maintain consistent part quality under challenging conditions. ISO geometry and fit that simplify toolset selection The ISO TNMG160404 triangular form with a 60° angle and a 0.4 mm corner radius follows standard dimensions, which simplifies selection of compatible holders. Compatibility with a turning toolholder is determined by form, relief angle, tolerance class, fastening and size; confirming these parameters ensures correct seating and secure clamping. The insert's cylindrical hole and double-sided layout enable straightforward indexing and positive clamping, permitting economical use of both cutting edges while maintaining positional repeatability. Improved chip control and surface consistency The double-sided chipbreaker is designed to manage chips effectively in a range of turning tasks, improving evacuation and reducing the risk of re-cutting. For external and internal turning, better chip control contributes to a more uniform surface finish and predictable tool life. The CVD coating offers wear resistance while the tough substrate absorbs intermittent impact—together these features help achieve a balance between stable chip control and edge life, especially in variable or semi-finished operations. Practical system integration and economical operation This indexable insert forms part of a complete turning system that includes the insert itself, the appropriate external holder or boring bar, a shim/clamp set and replacement screws. Using a double-sided, indexable geometry reduces tooling spend per cutting edge and simplifies inventory. For processors uncertain about holder compatibility or optimal cutting parameters, specifying the correct relief, tolerance and fastening type is essential to prevent assembly errors and ensure consistent machining results. For application-specific recommendations on Tungaloy turning inserts such as the TNMG160404 T9235, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss grade selection, holder compatibility and delivery options. Technical data Article number: 6785892 SKU: 6785892-Tungaloy Manufacturer SKU: TUN6785892 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Angle: 60° ISO code: 160404 Inscribed circle / size: 16 mm Corner radius: 0.4 mm Relief angle: 0° Special features Material: carbide Coating / Grade: T9235, CVD-coated carbide Chipbreaker: double-sided Shape: triangular Hole: with cylindrical hole Application: turning; suitable for external and internal turning; recommended for steel machining under interrupted or unstable cutting conditions FAQ What applications suit this insert best? The TNMG160404 T9235 Tungaloy insert is intended for external and internal turning operations, especially when machining steel with intermittent cuts or unstable conditions. How does the T9235 grade affect cutting performance? T9235 is a tough, CVD-coated carbide grade that prioritises edge strength over maximum cutting speed; the grade increases resistance to chipping during interrupted cuts and improves reliability in unstable setups. Is the insert indexable and reversible? Yes, the triangular design and cylindrical hole allow indexing and use of both sides; this makes the insert an economical option for repetitive turning tasks. Which holders are compatible with this geometry? Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; confirming these parameters with the chosen holder ensures secure clamping and repeatable positioning. Does the insert include a chipbreaker? The product features a double-sided chipbreaker designed to enhance chip control and surface consistency during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a robust triangular geometry delivers reliable performance in unstable and interrupted turning operations; the T9235 grade is tailored for steel applications at lower cutting speeds and improves tool life under shock loads. The reversible, double-sided design and secure cylindrical-hole clamping reduce tooling costs and simplify inventory. Order compatible holders or request application advice via Metav Werkzeuge for fast availability and technical support. TNMG 160404 T9235 — TNMG indexable turning insert for turning, Tungaloy The TNMG160404 T9235 is an ISO-compliant triangular indexable insert engineered as a tough, CVD-coated carbide grade for external and internal turning, optimised for interrupted cuts and unstable machining conditions. CVD-coated carbide T9235 for steel Triangular 60° geometry, 0.4 mm radius Double-sided, reversible cutting edges Cylindrical hole, 4.76 mm plate thickness Reliable performance for unstable and interrupted turning The T9235 grade is a CVD-coated carbide developed to offer toughness where interrupted cuts and unstable setups challenge tool life. In practice, the tougher substrate and coating combination suppresses edge chipping and extends the usable period between indexings, which in turn lowers the overall cost per component. This behaviour is particularly beneficial for batch work and repair turning where sudden tool impacts can occur; the result is more predictable production and fewer unplanned stoppages. Geometry and clamping that support process stability A triangular 60° plate with a 0.4 mm corner radius balances robustness and edge utility, delivering a compromise between finishing quality and strength for light roughing. The insert’s 4.76 mm plate thickness and central cylindrical hole ensure secure mechanical clamping in suitable holders. Compatibility with a given holder is determined by the insert form, 0° relief angle, tolerance class, fastening method, size and thickness; selecting a matching holder and clamp maintains repeatable seating and concentricity, which directly improves surface finish and tool life. Cost efficiency through reversible, double-sided design The double-sided layout with an integrated chipbreaker offers multiple indexable edges, making the insert reversible and economical for high-volume or mixed-run production. Using the second cutting face after indexing halves the tooling requirement for the same number of effective edges compared with single-sided alternatives. As part of an ISO tooling system the insert works together with an appropriate external holder or boring bar, plus shim/clamp kits and spare screws, simplifying stock planning and maintenance procedures. Practical selection advice and process benefits Choose a chipbreaker and grade that match the workpiece material and machining stability; this model’s chipbreaker design and tough substrate suit steel workpieces, particularly under lower cutting speeds or interrupted engagement. For external and internal turning tasks the combination of chip control and edge robustness reduces rework and tool-change frequency. Where surface finish is critical, pair the insert’s geometry with light feeds and stable clamping to exploit its edge integrity and produce consistent results. For application support, holder compatibility checks or availability of the Tungaloy TNMG160404 T9235 insert, contact Metav Werkzeuge for prompt technical advice and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6785797 Manufacturer SKU: TUN6785797 SKU: 6785797-Tungaloy Model series: ISO turning inserts Designation: TNMG160404 Brand: Tungaloy Material: Carbide Dimensions & angles Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Features & applications CVD-coated carbide (grade T9235) Triangular plate, with cylindrical hole Double-sided chipbreaker, reversible Suitable for steel; optimised for interrupted cuts System assembly: ISO insert, holder, shim/clamp set, spare screws FAQ Which materials is this insert best suited for? The TNMG160404 T9235 insert uses a tough CVD-coated carbide grade that is optimised for machining steel, especially in cases with interrupted cuts or unstable conditions. How is the insert secured in the holder? The insert is clamped via its central cylindrical hole; secure seating depends on matching the insert form, tolerance class, 0° relief angle, size and plate thickness with the chosen holder and clamp kit. Can this insert be indexed to use multiple edges? Yes, the design is double-sided and reversible, providing additional usable cutting edges and improving cost efficiency per edge. Which holder types are compatible with TNMG160404? Compatible holders are ISO external turning holders or boring bars specified for the TNMG form and size; confirm compatibility by matching form, plate thickness and fastening method to the insert designation. When should the T9235 grade be chosen over harder grades? Select the T9235 grade when toughness and resistance to chipping are priorities—typical for lower cutting speeds, interrupted cuts or unstable setups where a more wear-resistant but brittle grade would fail Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that excels in interrupted cutting, the compact 0.4 mm corner radius for versatile profile control, and ISO conformity for straightforward tool selection; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 160404 T9235 Turning Insert – Tungaloy (ISO triangular, 60°) The TNMG160404 T9235 is an ISO triangular turning insert designed for external and internal turning, offering a robust cutting geometry for interrupted cuts and unstable machining conditions. ISO triangular insert, 60° geometry CVD-coated carbide grade T9235 0.4 mm corner radius for versatile profiles Double-sided chipbreaker, cylindrical hole Proven performance under interrupted and unstable cutting The triangular geometry with a 60° included angle delivers a stable cutting edge that is particularly effective for interrupted cuts and less rigid setups. The combination of the plate form and a 0.4 mm corner radius reduces the risk of edge chipping while enabling a consistent profile on turned workpieces. For production environments that require predictable cycle times, this indexable insert provides a balance between durability and form fidelity, helping to maintain component tolerances with fewer tool changes. Longer operation through CVD coating and material choice The CVD-coated carbide composition of grade T9235 has been selected for applications in steel where toughness is needed at moderated cutting speeds. The coating improves wear resistance and helps to stabilise the cutting edge under variable cutting forces, extending tool life and reducing unplanned downtime. Explained plainly, the coating acts as a protective layer that slows abrasive wear and maintains a sharper edge for longer, which translates into fewer indexings and more consistent component quality. Clear compatibility and straightforward mounting Compatibility with a holder is defined by form, relief angle, tolerance class, fastening, size and thickness; the insert is supplied with a cylindrical hole to suit common clamping systems and is double-sided, allowing economical reversal when one edge is expended. The plate thickness of 4.76 mm and the 16 mm inscribed circle size make the insert suitable for a wide range of ISO-compatible external holders and boring bars. This clarity of system build-up simplifies inventory and reduces the time needed for correct tool selection. Reliable choice for steel turning and shop-floor productivity Designed primarily for machining steel, the insert’s tough substrate and chip control characteristics offer a pragmatic solution where cut interruptions or less rigid fixturing are frequent. The indexed design supports quick replacement without regrinding, promoting steady throughput in batch production. When paired with a correctly matched holder and chipbreaker selection, the insert contributes to reproducible surface finish and consistent component quality across runs. Contact Metav Werkzeuge for application advice and current stock details for the Tungaloy TNMG160404 T9235 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785801-Tungaloy Manufacturer SKU: TUN6785801 Manufacturer article number: 6785801 Label: TNMG160404 T9235 Tungaloy-Wendeplatte Data Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 16 mm Geometry angle: 60° Relief angle: 0° Hole: with hole (cylindrical) Special features CVD-coated carbide, grade T9235 Triangular plate, ISO designation TNMG160404 Double-sided chipbreaker Intended application: turning (external and internal) Suitable for steel machining and interrupted cuts Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The TNMG160404 T9235 insert is formulated primarily for steel machining; its T9235 CVD-coated carbide substrate provides toughness for interrupted and unstable cutting conditions. How does the T9235 coating affect tool life? The CVD coating on the Tungaloy TNMG160404 T9235 reduces abrasive wear and helps maintain edge integrity, resulting in longer tool life and more consistent surface finish under variable cutting forces. Is the insert reversible and how is it mounted? This triangular insert is double-sided and features a cylindrical hole for standard clamping; reversal is possible after using one cutting edge, allowing economical use of all available edges. Which holders are compatible with this ISO plate? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; the TNMG160404 follows ISO conventions to ensure broad compatibility with ISO-compatible external holders and boring bars. What corner radius and plate thickness should be expected? The insert has a 0.4 mm corner radius and a plate thickness of 4.76 mm, offering a balance between profile definition and edge strength for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide substrate (T9235), a precise 60° triangular geometry and a double‑sided chipbreaker to improve productivity in unstable turning conditions; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG 160404 T9235 turning insert by Tungaloy — CVD‑coated carbide, 60° TNMG160404 T9235 is an ISO‑normed triangular insert for external and internal turning, designed for steel machining under unstable or interrupted cutting conditions CVD-coated carbide grade T9235 Triangular ISO insert, 60° cutting geometry Designed for steel, unstable and interrupted cuts Double-sided chipbreaker, cylindrical hole Increase process reliability in difficult turning operations The combination of a CVD‑coated surface and a wear‑resistant carbide substrate delivers predictable tool life and steady performance in interrupted and unstable cuts. The chosen grade, T9235, is formulated for toughness rather than maximum speed, which reduces the likelihood of chipping during heavy engagement and abrupt load changes. For production environments where tool change frequency affects uptime, this equates to fewer stoppages and a more reliable machining rhythm. The triangular geometry with a 60° cutting angle also offers versatility in both finish and roughing passes while maintaining repeatable results. Clear advantages for steel machining and tool handling The insert’s geometry and double‑sided chipbreaker are engineered to control chip formation and evacuation when working on steel. Controlled chips improve surface integrity and reduce secondary operations, providing a tangible cost‑benefit over time. The 0.4 mm corner radius helps balance edge strength with the achievable surface finish, making the grade suitable for parts where occasional interrupted cuts occur. Compatibility with ISO holders is determined by form, relief angle, tolerance class, fastening method, size and thickness, which supports straightforward integration into standard turning tool systems. Practical integration and set‑up guidance for workshops Installation is simple thanks to the cylindrical hole and standard plate dimensions; the insert sits in conventional ISO clamping systems and can be rotated to use the alternate cutting edges, extending service life. The 4.76 mm plate thickness contributes to rigidity in the tool assembly, helping to damp vibrations and supporting consistent cutting conditions. When selecting speeds and feeds, prioritise the grade’s toughness—moderate cutting speeds with stable feeds yield the best balance of longevity and efficiency. For specialised alloys or extreme conditions, match the chipbreaker style and cutting data to the machine rigidity and workpiece stability. Contact Metav Werkzeuge for tailored recommendations on Tungaloy TNMG160404 T9235 inserts and assistance matching holders and cutting data Technical data Article number: 6785951 SKU: 6785951-Tungaloy Manufacturer SKU: TUN6785951 Designation: TNMG160404 T9235 Tungaloy insert Measurements Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Materials & features Coating: T9235 (CVD-coated) Substrate: carbide Shape: triangular Chipbreaker: double-sided Hole: cylindrical hole Application: turning Compatibility: ISO turning holders FAQ What workpiece materials is this insert suitable for? The Tungaloy TNMG160404 T9235 insert is optimised for machining steel, particularly in applications with unstable or interrupted cuts where a tougher grade is required. How does the T9235 coating affect performance? The T9235 CVD coating improves wear resistance while the tough substrate reduces chipping risk, resulting in steadier tool life under varying loads. Can the insert be indexed to use multiple cutting edges? Yes, the triangular plate with a double‑sided chipbreaker allows indexing to alternate edges, extending effective insert life. Which holders are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the TNMG160404 fits standard ISO turning holders that accept triangular inserts with a cylindrical hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade tailored for steel, a 0.4 mm nose radius and a robust 60° triangular geometry to increase process stability and extend tool life in interrupted turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for compatibility with existing holders. TNMG160404 T9235 indexable turning insert — TNMG for turning, Tungaloy A TNMG160404 T9235 indexable insert designed for external and internal turning of steel, offering stable chip control and reliable edge life under interrupted or unstable conditions. CVD-coated carbide for improved wear resistance Suitable for steel and interrupted cuts 0.4 mm nose radius for balanced finish and strength 60° triangular insert for versatile turning operations Double-sided chipbreaker for economical use Stable cutting in interrupted and unstable conditions The combination of a CVD coating with a tough carbide substrate provides resistance to abrasive wear while retaining edge integrity during shocks and interruptions. This makes the insert especially suitable for turning operations where feed and depth vary or the cut is interrupted by features on the workpiece. The T9235 grade is formulated for steel at moderate to lower cutting speeds, so the practical effect is fewer edge failures, longer useful life and increased process reliability — all factors that support predictable cycle times and reduced scrap rates. Geometry that simplifies tool system integration Designed as an ISO TNMG triangular insert with a 60° included angle and a 0° relief, the geometry matches a wide range of standard external holders and boring bars. The insert’s cylindrical hole and standard thickness of 4.76 mm allow repeatable clamping and positioning; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. Using standardised holders and the correct clamping set ensures secure fixing and consistent cutting height, which in turn improves surface finish and repeatability across batches. Economic advantages through usable edges and chip control The double-sided design and defined chipbreaker deliver two usable edges per index, which increases cost-efficiency compared with single-use alternatives. The 0.4 mm nose radius strikes a balance between surface finish and edge strength: smaller radii improve detail and contour fidelity, while still providing sufficient edge stability for light interrupted cuts. Together, the double-sided chipbreaker and the robust grade reduce changeover frequency and machine downtime, supporting a measurable improvement in productivity for medium-duty turning tasks. Practical application notes and selection guidance When selecting an insert for a specific turning job, match the T9235 grade and the double-sided chipbreaker to the workpiece material and the expected cutting conditions. The grade suits a wide range of steels under less-than-ideal stability and at moderate cutting speeds; for harder or higher-speed applications, consider alternative grades. The ISO TNMG form is compatible with most triangular turning holders; ensure the holder accepts a 16 mm inscribed circle and the 4.76 mm thickness. For finishing operations, evaluate whether a smaller nose radius or alternative chip control geometry is preferable to achieve the target surface quality. For reliable, production-ready turning with Tungaloy CVD-coated inserts, contact Metav Werkzeuge for stock information and technical compatibility support: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Manufacturer article number: 6785950 SKU: 6785950-Tungaloy Manufacturer SKU: TUN6785950 Model series: ISO turning indexable inserts Designation: TNMG160404 Dimensions & Core Data Inscribed circle / size: 16 mm Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Materials & Special Features Material: carbide Coating: CVD Grade: T9235 Insert form: triangular (TNMG) Chipbreaker: double-sided Application: turning Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What is the primary application for this insert? The TNMG160404 T9235 Tungaloy insert is intended for external and internal turning operations on steel, especially under interrupted or unstable cutting conditions. How does the T9235 grade perform compared with other grades? T9235 is a CVD-coated, tough carbide grade optimised for steel at lower cutting speeds and offers good edge strength and wear resistance for interrupted cuts. How many cutting edges are available per insert? The triangular TNMG160404 insert is double-sided with multiple usable edges; the double-sided chipbreaker provides economical edge utilisation. What does the 0.4 mm nose radius mean for surface finish? A 0.4 mm nose radius offers a compromise between surface finish and edge strength: finer contour fidelity while maintaining sufficient robustness for medium-duty interrupted turning. Is the insert compatible with standard ISO holders? The TNMG160404 form is an ISO-standard geometry; compatibility requires matching the holder to the insert form, relief angle, tolerance class, fastening, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9235 and the ISO TNMG160404 geometry for robust performance in steel turning and interrupted cuts; reliable seating and a 0.4 mm corner radius help maintain tool life and process stability. Order the insert directly via Metav Werkzeuge or consult our technical advisers for holder matching and setup guidance. TNMG 160404 T9235 Turning Insert (Tungaloy) — CVD-coated carbide, 0.4 mm radius The TNMG160404 T9235 is an ISO-standard triangular turning insert tailored for external and internal turning of steel, engineered to perform in interrupted and less stable cutting conditions. CVD-coated carbide grade T9235 Designed for steel and interrupted cuts TNMG160404 ISO triangular insert 0.4 mm corner radius, double-sided chipbreaker High toughness for interrupted and unstable turning The CVD-coated carbide T9235 offers a balance of toughness and wear resistance that is particularly beneficial for turning steel where interruptions or unstable clamps occur. The CVD-coated carbide microstructure increases fracture resistance compared with uncoated grades, so the insert sustains edge integrity under varying loads. For machining operations with frequent engagement and disengagement of the cutting edge, this grade reduces the risk of premature chipping while maintaining acceptable wear behaviour at moderate cutting speeds. Predictable seating and repeatable orientation for process reliability Built to the ISO-standard TNMG160404 geometry, the insert ensures consistent orientation and clamping in compatible holders. The defined 0° relief angle and standardised form, size and thickness simplify selection of external holders or boring bars and support repeatable set-up. Predictable seating shortens set-up checks and reduces variability between tool changes, contributing to more consistent component tolerances and fewer machine stops for adjustment. System-ready design that simplifies tooling choices The triangular geometry with a 0.4 mm corner radius and double-sided chipbreaker provides a versatile profile for finishing and light roughing in steel. The insert is designed to work as part of a system — an ISO turning insert plus a matching external holder or boring bar, a suitable seating/clamping kit and spare screws — so workshop integration is straightforward. Selecting the appropriate chipbreaker and grade for the workpiece material and machine stability will optimise chip control and surface quality while extending tool life. For precision steel turning with proven toughness, contact Metav Werkzeuge for assistance selecting the correct holders and accessories for the Tungaloy TNMG160404 T9235 insert and arrange supply through Metav Werkzeuge. Technical data Article number: 6785996 Manufacturer SKU: TUN6785996 Product SKU: 6785996-Tungaloy Facts ISO designation: TNMG160404 Plate form: triangular, size 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Nose angle: 60° Relief angle: 0° Special features Material: carbide Coating: CVD-coated carbide (T9235) Chipbreaker: double-sided Hole: cylindrical hole (with hole) Typical application: external and internal turning System components: insert, matching holder/boring bar, seating/clamping kit, spare screws FAQ How is holder compatibility determined for this insert? Compatibility depends on the holder form, relief angle, tolerance class, fastening method, size and thickness; the TNMG160404 T9235 insert requires a matching ISO TNMG seat and clamping arrangement for correct orientation. Which materials is this grade optimised for? The T9235 grade is engineered as a tough CVD-coated carbide for machining steel, especially where interrupted cuts or less stable conditions occur. Is the chipbreaker usable on both sides of the insert? The insert features a double-sided chipbreaker; where holder geometry permits, both sides can be employed to maximise lifetime while maintaining chip control. What cutting conditions suit this insert best? The grade is intended for lower to moderate cutting speeds when toughness is required; it excels in operations with interrupted engagement and variable cutting forces. What does the 0° relief angle mean for set-up and performance? A 0° relief angle provides a standardised seating geometry that improves repeatable orientation in compatible holders, helping to reduce setup variance and maintain consistent cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of the ISO-standard compatibility and the tough T9235 grade for reliable turning under unstable cutting conditions; the compact TNMG160404 geometry with a 0.4 mm corner radius and a 60° included angle delivers predictable chip control and straightforward insert changes — order through Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 160404 T9235 — Turning insert by Tungaloy, CVD-coated carbide, 60° TNMG160404 T9235 indexable insert for general turning, optimised for steels and interrupted cuts CVD-coated carbide toughness Triangular insert, 60° included angle 0.4 mm corner radius for fine profiles Double-sided chipbreaker for extended use Consistent performance where stability varies The combination of a CVD-coated carbide substrate and the T9235 tough grade gives the insert a balance between wear resistance and edge strength. This makes the component particularly suitable for turning of steels where interrupted cuts or vibration-prone setups occur. The ISO-standard geometry ensures the insert seats reliably in compatible holders; compatibility depends on form, free clearance, tolerance class, fastening, size and thickness, allowing clear assessment when preparing tool changes. Faster setup and secure seating for efficient production With a triangular shape and a central cylindrical hole, the design supports rapid indexing and secure clamping in the holder. The 60° included angle and 0.4 mm radius permit fine contouring while maintaining edge robustness, reducing the need for frequent part rework. Where changeovers must be quick, the straightforward system build—insert, matching external holder or boring bar, shim/clamp set and replacement screw—helps keep machine downtime to a minimum and supports repeatable results. Predictable chip control and extended tool life The double-sided chipbreaker geometry and the CVD coating together assist in stable chip formation and heat management during cutting, which contributes to longer in-service life and more consistent surface finishes. In less stable conditions, the tough carbide grade reduces chipping risk at the edge, helping to maintain process reliability. For applications requiring reproducible outcomes in interrupted or unstable cuts, this insert offers a pragmatic compromise between wear resistance and edge security. For applications involving steel turning with variable stability, choose the Tungaloy T9235 grade — contact Metav Werkzeuge for tailored advice or to secure the correct inserts and matching holders for the process Technical data Article number: 6785891 Manufacturer SKU: TUN6785891 Item SKU: 6785891-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO code: 160404 Corner radius: 0.4 mm Included angle: 60° Insert size: 16 mm Free clearance: 0° Special features Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Grade: T9235 (tough grade for steel) Substrate/coating: CVD-coated carbide Application: turning Material: carbide FAQ Is this insert suitable for interrupted cuts in steel? Yes. The TNMG160404 in T9235 grade is designed for steel turning where interrupted cuts or unstable conditions occur; the tough grade reduces chipping risk. How is compatibility with holders determined? Compatibility is based on form, free clearance, tolerance class, fastening, size and thickness; ensure the holder matches the TNMG160404 ISO geometry before fitting. Can the insert be indexed to use multiple cutting edges? Yes. The triangular shape and double-sided chipbreaker permit indexing to additional edges, extending effective tool life. What does the T9235 designation mean for cutting performance? T9235 denotes a tough, CVD-coated carbide grade tailored for steel at lower cutting speeds and less stable machining, prioritising edge security over maximum wear resistance. Which spare parts are typically required for a complete tool set-up? A matching external holder or boring bar, an appropriate shim/clamp set and replacement screws are the standard components needed alongside the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for tough steel applications and the stability of a 60° triangular geometry with a cylindrical hole for secure clamping — ideal for interrupted and unstable turning operations. Order this insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TNMG 160404 T9235 turning insert (ISO) by Tungaloy — CVD-coated carbide, 0.4 mm corner radius A TNMG160404 T9235 indexable turning insert for external and internal turning, engineered for interrupted cuts and unstable machining conditions CVD-coated carbide grade T9235 Triangular 60° insert with cylindrical hole 0.4 mm corner radius for precise profiling Double-sided chipbreaker for interrupted cuts Built for reliable interrupted turning and tougher steels The insert combines a CVD-coated carbide substrate with the T9235 grade, a tough composition formulated for machining steel at lower cutting speeds and in less stable conditions. The triangular 60° geometry provides a secure seating and predictable rake interaction, while the double-sided chipbreaker improves chip control during intermittent cuts. These design choices reduce the risk of edge chipping and make the insert particularly suitable where stability is limited and robustness is required. Clear guidance on compatibility and system assembly This article belongs to the ISO indexable turning inserts series and fits systems where shape, clearance angle, tolerance class, fastening method, size and thickness match the holder. The insert features a cylindrical hole for positive clamping in compatible external holders or boring bars; the full working system typically comprises an insert, a corresponding holder or boring bar, a shim/clip, a clamping set and replacement screws. Selecting the correct chipbreaker and grade according to the workpiece material and machine stability enables consistent results and simplifies setup. Process advantages: longer edge life and predictable performance Using a wear-resistant grade such as T9235 yields a balance between toughness and wear resistance that pays off in reduced downtime and fewer indexings. The 0.4 mm corner radius supports precise profile generation and helps maintain surface quality under interrupted engagement. Overall, the configuration aims to deliver stable edge life, improved chip control and repeatable outcomes — benefits that contribute to higher productivity and lower total machining cost in demanding turning tasks. Contact Metav Werkzeuge for tailored application advice on the TNMG160404 T9235 insert or to arrange prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, technical assistance and ordering. Technical Data Article number: 6785893 SKU: 6785893-Tungaloy Manufacturer SKU: TUN6785893 WPL designation: TNMG160404 Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Insert size: 16 mm Geometry angle: 60° Clearance angle: 0° Hole: cylindrical hole Special features Material: carbide (Hartmetall) Coating/grade: T9235 (CVD-coated) Double-sided chipbreaker Triangular insert, three cutting edges per side Intended use: external and internal turning Typical system: insert, holder or boring bar, shim/clip, clamping set, screws FAQ What materials is this insert best suited for? The Tungaloy TNMG160404 T9235 insert is optimised for steel machining, particularly where a tough grade is needed for lower cutting speeds and interrupted or unstable cutting conditions. Is the insert double-sided and how many usable cutting edges does it provide? Yes — the insert has a double-sided design and a triangular form, giving multiple usable cutting edges for economical indexable use of the TNMG160404 T9235 insert. How is holder compatibility determined for this ISO insert? Compatibility depends on insert form, clearance angle (0°), tolerance class, fastening type, size (16 mm) and thickness; verify these parameters when matching the TNMG160404 to an external holder or boring bar. Can the TNMG160404 handle interrupted cuts and unstable conditions? The T9235 grade is specifically formulated for tough performance in interrupted cuts and less stable setups, offering improved resistance to chipping and predictable edge life. What is the ISO designation and hole style of this insert? The ISO designation is TNMG160404 and the insert features a cylindrical hole for secure clamping within compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide cutting edge combined with ISO compatibility and reliable chip control for efficient turning operations; order genuine inserts or request advice via Metav Werkzeuge if required. TNMG160404 TH10 Tungaloy indexable insert (turning) — triangular, 0.4 mm radius, 60° TNMG160404 TH10 is an ISO-standard triangular indexable insert for external and internal turning, optimised for non-ferrous materials and applications requiring low cutting forces. ISO triangular insert TNMG 160404 Uncoated carbide grade TH10 0.4 mm corner radius, 60° included angle Double-sided chipbreaker, cylindrical hole Engineered for consistent turning performance The ISO standard geometry ensures predictable seating and repeatable results when paired with compatible holders. This triangular indexable insert offers a stable 60° included angle and a compact 0.4 mm corner radius, balancing strength and edge acuity. The use of an uncoated carbide substrate in the TH10 grade delivers consistently low cutting forces, which reduces spindle load and helps maintain toolpath stability. Compatibility with the toolholder is governed by shape, relief angle, tolerance class, fastening method, size and thickness, so selection is straightforward when the holder specifications match. Low cutting forces and improved surface quality The TH10 uncoated grade is a sharp universal choice for non-ferrous materials, promoting a clean surface finish with reduced burr formation. The double-sided chipbreaker is designed to assist chip control in turning tasks where chips tend to be continuous, reducing the risk of entanglement and improving process reliability. For less experienced teams, the functional advantages translate into fewer reworks and easier downstream inspection, while experienced operators will appreciate the predictable cutting behaviour and consistent part quality. Reliable clamping and cost-effective indexing A cylindrical hole and a plate thickness of 4.76 mm provide secure seating and repeatable clamping in compatible holders, supporting accurate tool positioning. The insert is double-sided, allowing multiple indexes and extending consumable life, which lowers cost per cutting edge in volume turning. The combination of a compact corner radius and robust substrate makes the insert suitable for operations where moderate strength and fine edge integrity are required. The 0° relief (clearance) angle complements certain holder geometries to achieve the intended cutting geometry without unexpected interference. Practical guidance for selection and use Intended for external and internal turning, this insert is best matched to materials and machining conditions that favour a sharp, uncoated edge. Select the chipbreaker and grade according to workpiece material, machining stability and desired finish; for non-ferrous alloys the TH10 grade is recommended due to its low cutting-force behaviour. Where machining rigidity is limited, prefer smaller depths of cut and conservative feeds to protect the edge. Remember that insert compatibility depends on form, relief angle, tolerance class, fastening, size and thickness—confirm these dimensions with the holder specification before fitting. Contact Metav Werkzeuge for application advice or to secure genuine Tungaloy turning inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6808347 SKU: 6808347-Tungaloy Manufacturer SKU: TUN6808347 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle: 16 mm Included angle: 60° Relief angle: 0° Special features Material: carbide (uncoated) Grade: TH10 Geometry: triangular, double-sided chipbreaker Hole: cylindrical ISO designation: TNMG160404 Application: turning (external and internal) FAQ Is this insert suitable for machining steel? The TH10 grade in this TNMG160404 insert is a sharp universal designed primarily for non-ferrous materials; for machining steel, a different grade optimised for iron-based alloys is recommended. How many cutting edges are available per insert? The TNMG160404 insert is double-sided and triangular, providing multiple usable edges to extend tool life and reduce tooling costs. What holder characteristics must match the insert? Compatibility requires matching the insert form, relief angle (0°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm) to the holder specification. Is the insert coated? This Tungaloy insert uses an uncoated carbide substrate (TH10), chosen to keep cutting forces low and to promote clean finishes in the right material groups. Which chipbreaker should be chosen for a given material? The double-sided chipbreaker on this insert is suitable for continuous-chip tendencies typical of non-ferrous alloys; select the breaker and grade according to material, feed/ speed and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the proven TH10 sharp universal grade and ISO compatibility to achieve low cutting forces and clean finishes in turning operations; order directly via Metav Werkzeuge or consult our team for application-specific advice. TNMG160404 TH10 triangular indexable insert for turning — Tungaloy TNMG160404 TH10 is an ISO-format triangular indexable insert for general turning, offering a sharp uncoated carbide edge and double-sided chipbreaker for versatile non-ferrous machining ISO TNMG 160404 geometry, 60° triangle Sharp uncoated carbide grade TH10 Double-sided chipbreaker for versatile use Cylindrical hole and 0° clearance for secure clamping Precision geometry for consistent turning performance The TNMG160404 TH10 insert combines a standard 60° triangular geometry with a central cylindrical hole and a 0° clearance angle, ensuring reliable seating and repeatable clamping in ISO-compatible holders. The corner radius 0.4 mm and 16 mm nominal size provide a balance between edge strength and the ability to produce fine surface finishes. As an indexable insert, it can be rotated to present fresh cutting edges, extending usable life and lowering per-part cost compared with brazed tips. Compatibility depends on holder form, tolerance class and fastening method; the ISO system makes matching straightforward for most external and internal turning toolholders. Low cutting forces and clean surface results for non-ferrous materials Designed as a sharp universal grade, the TH10 uncoated carbide cutting material reduces cutting forces and helps avoid material buildup on the edge when machining aluminium, copper and Messing alloys. The double-sided chipbreaker improves chip control across a range of cutting depths and feeds without relying on a coating. For workshop environments where predictable chip formation and easy chip evacuation matter, this insert delivers efficient machining and consistent part quality. Choosing the correct chipbreaker and grade for the workpiece and machining stability optimises cycle time and tool life. Practical guidance for selection and application For reliable use, select a matching ISO-compatible external holder or boring bar that accommodates the 16 mm triangular plate and 4.76 mm thickness; secure clamping and correct seat geometry are essential to exploit the insert’s performance. Where surface finish is a priority, the modest corner radius and sharp edge favour finishing passes on non-ferrous components. For interrupted cuts or heavier engagement, consider toolholder stiffness and feed adjustment to protect the uncoated edge. The ISO format and standard dimensions simplify stocking and replacement, supporting continuous production with minimal downtime. Contact Metav Werkzeuge for tailored recommendations on Tungaloy TH10 inserts and matching holders — our consultants will advise on holder compatibility, optimal chipbreaker choice and cutting parameters. Technical data Article number: 6808367 Manufacturer SKU: TUN6808367 Shop SKU: 6808367-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Geometry angle: 60° Features / Material Material: carbide Grade: TH10 (uncoated) Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning ISO designation: TNMG160404 FAQ What materials is this insert best suited for? The TNMG160404 TH10 Tungaloy indexable insert is optimised for non-ferrous materials such as aluminium, copper and Messing, offering low cutting forces and clean surface results. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker allows two usable cutting edges per side and consistent chip control across varied feeds, so the insert supports longer intervals between indexings and steady cycle times. Which holders are compatible with the insert? Compatibility depends on holder form, free angle and clamping system; the TNMG160404 follows ISO dimensions, so most ISO-compatible triangular turning holders and boring bars that accept a 16 mm plate and 4.76 mm thickness will be suitable. Is the TH10 grade coated or uncoated, and what does that mean in practice? The TH10 grade is uncoated carbide, which reduces built-up edge tendency on soft, non-ferrous alloys and keeps cutting forces low; the uncoated edge is easier to resharpen or replace in-shop procedures. What stock references identify this item? This product is listed as TNMG160404 TH10 Tungaloy insert with article number 6808367 and shop SKU 6808367-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 grade and the insert's 0.4 mm corner radius for low cutting forces and fine surface finishes; the triangular, ISO‑standard geometry ensures easy indexing and predictable clamping. Order the insert directly via Metav Werkzeuge or consult the technical team for optimisation of holder selection and cutting data. TNMG 160404 TH10 — Turning insert (TNMG160404) — Tungaloy The TNMG160404 TH10 is a triangular ISO turning insert designed for external and internal turning, providing a sharp uncoated edge for efficient machining of non‑ferrous materials and unstable setups. ISO triangular insert with 16 mm size Sharp universal grade TH10 for non‑ferrous materials 0.4 mm corner radius for fine profiles Cylindrical hole, double‑sided chipbreaker Reliable chip control for consistent throughput The TH10 uncoated grade is engineered as a sharp, universal option that reduces cutting forces and supports clean surface finishes when machining non‑ferrous materials. As an indexable carbide insert made from cemented carbide, it offers low thermal sensitivity and consistent edge geometry, which translates into fewer interruptions on the shop floor. The presence of a double‑sided chipbreaker improves chip formation under varying cutting conditions, helping to maintain cycle time stability and reduce the need for frequent tool changes. Geometry and mounting for predictable integration The triangular form with a nominal 16 mm size and a 60° cutting angle provides robust support in common ISO toolholders while the 0.4 mm corner radius allows fine profile work without compromising strength. The insert thickness of 4.76 mm and the cylindrical hole ensure secure clamping; compatibility to a holder depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. This predictable interface reduces setup time and simplifies indexable insert management in production environments. Practical machining advantages and application guidance When turning with limited stability or on lighter machines, the sharp uncoated edge of this indexable insert lowers power draw and promotes smoother finishes on aluminium, brass and similar alloys. For best results, match the double‑sided chipbreaker and grade to the workpiece, cutting direction and setup rigidity—this yields efficient material removal with reproducible surface quality. The ISO‑based system structure supports easy stock control and rapid insertion into existing tool systems, aiding process reliability and repeatability. Contact Metav Werkzeuge to discuss how the TNMG160404 TH10 insert can be integrated into current turning processes and to receive tailored recommendations from our technical advisors at Metav Werkzeuge. Technical data Article number: 6808351-Tungaloy Manufacturer SKU: TUN6808351 Manufacturer item number: 6808351 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 60° ISO code: 160404 Special features Shape: triangular Hole: cylindrical, with hole Chipbreaker: double‑sided Grade: TH10 Cutting material: uncoated cemented carbide Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ Which materials is this insert best suited for? The TNMG160404 TH10 insert (Tungaloy, SKU 6808351-Tungaloy) is optimised for non‑ferrous materials such as aluminium and brass, where the uncoated TH10 grade helps to keep cutting forces low and surfaces clean. Is the insert reversible and indexable? Yes — the TNMG160404 is double‑sided and indexable; both sides can be used before disposal, and the cylindrical hole supports secure clamping in compatible ISO holders. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the TNMG160404 fits ISO‑compatible triangular holders that accept a 16 mm insert with a 4.76 mm thickness. Does this insert have a coating? No — the cutting material is uncoated cemented carbide, chosen to provide a sharp cutting edge and reduced cutting forces in the intended applications. What corner radius and applications suit this insert? The 0.4 mm corner radius is suitable for fine profiling and finishing passes where a balance between edge strength and surface definition is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide grade, precise ISO triangle geometry and secure clamping for consistent turning performance; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TNMG 160404 TH10 TNMG160404 TH10 Turning insert by Tungaloy — uncoated carbide, 60° triangle A TNMG160404 TH10 indexable turning insert designed for ISO-compliant external and internal turning, offering a low cutting-force uncoated grade for clean surface finishes. Sharp uncoated carbide grade TH10 ISO 160404 triangle geometry, 60° angle 0.4 mm corner radius for fine finish Compatible with ISO turning holders Cylindrical hole for secure fastening Consistent edge control for reliable turning results The insert delivers stable cutting behaviour through its uncoated carbide composition and the TH10 grade, developed for low cutting forces and clean surfaces when machining non-ferrous materials. The triangle geometry with a 60° included angle provides three active cutting edges per seat, enabling cost-effective indexing while maintaining repeatable contact conditions. For workshop planning, this means fewer tool changes and predictable part quality in both roughing and finishing passes. Secure clamping and ISO compatibility reduce setup time Constructed to ISO norms, the triangular insert features a cylindrical centre hole and standardised dimensions, ensuring compatibility with a wide range of external holders and tool posts. The defined free clearance angle of 0° and the established tolerance class simplify selection of the appropriate clamping kit and underlay; the result is rapid, reproducible set-ups and reduced downtime. Clear fitment reduces the risk of misalignment, which in turn preserves the cutting edge and contributes to consistent component geometry. Productivity improvements and surface-quality benefits With a 0.4 mm corner radius, the insert balances edge strength and surface finish: small radii help achieve fine finishes on contour turns while supporting moderate chip loads. The double-sided chipbreaker design enhances chip control for non-ferrous materials and similar alloys, reducing rework and post-process cleaning. Choosing an uncoated grade like this can be particularly advantageous where minimal cutting force and a sharp edge are required to avoid smearing or delamination on sensitive workpiece surfaces. Practical application notes and handling guidance The insert is intended for turning applications and is principally suited to non-ferrous materials where a sharp, uncoated edge yields the best results. When integrating the insert into a tooling system, verify holder compatibility by matching shape, thickness (4.76 mm) and centre-hole style; correct selection of seat and clamp ensures reliable cutting performance and repeatable positioning. Store inserts in a dry, protected environment to prevent chipping and preserve the cutting edge until use. Contact Metav Werkzeuge to discuss suitability for specific jobs, request delivery options or arrange technical advice on toolholder compatibility and cutting data Technical data Article number: 6808398 Manufacturer SKU: TUN6808398 SKU: 6808398-Tungaloy Name: TNMG160404 TH10 Tungaloy insert Dimensions & geometry ISO code: 160404 Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Free clearance angle: 0° Centre hole: with cylindrical hole Features & applications Material: carbide (uncoated) Grade: TH10 Chipbreaker: double-sided Shape: triangular Application: turning (external and internal) Compatibility: ISO turning holders; system includes underlay/clamp and replacement screws FAQ What materials is this insert best suited for? The TNMG160404 TH10 insert is optimised for non-ferrous materials and applications where a sharp, uncoated carbide edge supports low cutting forces and clean surfaces. Is the insert reversible and how many cutting edges are available? The triangular geometry and double-sided design provide multiple indexable edges; the arrangement allows three usable corners per side, enabling efficient re-indexing. How does the TH10 grade affect cutting performance? The TH10 grade offers a sharp, universal uncoated characteristic that reduces cutting force and improves surface finish in suitable materials, extending productive machining windows. What must be checked for holder compatibility? Confirm shape, thickness (4.76 mm), tolerance class, free angle and the cylindrical centre hole to ensure correct seating and clamp engagement; correct match maintains stable cutting conditions. Can this insert achieve fine surface finishes? Yes — the 0.4 mm corner radius and sharp uncoated edge contribute to fine surface quality, particularly on contours and delicate non-ferrous components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH110 Wendeplatten - Tungaloy
Take advantage of the combination of reliable PVD-coated carbide, a double-sided chipbreaker and a compact triangular form for consistent turning performance; order original Tungaloy inserts directly via Metav Werkzeuge or consult the Metav team for application support. TNMG160408 AH110 ISO turning insert by Tungaloy — PVD-coated carbide, 0.8 mm radius A TNMG160408 AH110 triangular ISO insert designed for external and internal turning, engineered for process security and a sharp cutting edge in stable machining conditions PVD-coated carbide grade AH110 Double-sided chipbreaker for versatility 0° clearance angle for positive cutting TNMG 160408 triangular insert, 0.8 mm radius Consistent cutting performance and process security The PVD-coated carbide specification provides a wear-resistant surface that extends cutting life while maintaining a razor-sharp edge, delivering measurable improvements in cycle stability. The offered grade is optimised for applications where edge integrity and repeatability matter; the double-sided chipbreaker reduces build-up and stabilises chip flow, which in turn lowers vibration and improves surface finish. This leads to fewer interruptions and a steadier production output during turning operations. Clear fitment rules and simple mounting guidance Compatibility is governed by the ISO form, clearance angle, tolerance class, fastening method, size and thickness. The triangular geometry matched to an appropriate outer holder or boring bar ensures secure clamping and repeatable positioning. The insert has a cylindrical hole for positive locating and a nominal thickness of 4.76 mm, so selection of the mating holder should reflect these dimensions and the ISO 160408 designation to ensure correct seating and clamp engagement. Material suitability and recommended use cases The wear- and fracture-resistant grade is designed for general turning where a sharp cutting edge and process reliability are priorities. Typical applications include external finishing and light to medium roughing where dimensional accuracy and surface integrity matter. The 0° clearance angle produces a positive cutting geometry that is advantageous for stable setups, while the 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes on machined components. Practical benefits for workshop productivity Using this ISO-series insert reduces downtime associated with edge failure and simplifies inventory through a standardised ISO designation. The robust PVD layer and carbide substrate together offer consistent tool life across batches, supporting predictable maintenance intervals and cost calculations. Where tool change frequency and surface quality are KPIs, the insert contributes to improved throughput and fewer corrective operations. Technical considerations for optimal results Select the chipbreaker and grade matching the workpiece material and machining conditions: the combination of grade AH110 and the double-sided breaker is optimised for stable cutting and controlled chip formation. For unstable setups, choose more conservative cutting parameters or a holder with enhanced rigidity. When switching to this insert, verify holder compatibility with the ISO TNMG 160408 geometry and confirm screw and clamp fit due to the cylindrical hole design. Contact Metav Werkzeuge for tailored recommendations and to obtain original Tungaloy TNMG160408 AH110 inserts; technical advice is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6808419 Manufacturer SKU: TUN6808419 SKU: 6808419-Tungaloy Designation: TNMG160408 AH110 Manufacturer: Tungaloy Core dimensions Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical hole Materials & features Substrate: carbide Coating: PVD Chipbreaker: double-sided Shape: triangular Application: turning (external and internal) ISO series compatibility: ISO turning inserts FAQ What materials is this insert suitable for? The TNMG160408 AH110 insert is a PVD-coated carbide grade designed for general turning where wear resistance and a sharp cutting edge are required; select the chipbreaker and cutting data according to the specific workpiece material. How is the insert fixed to the holder? The insert uses a cylindrical hole for positive locating and must be used with a compatible ISO triangular holder or boring bar that matches the 16 mm size and 4.76 mm thickness. Can this insert be used for internal turning? Yes, the ISO geometry and double-sided chipbreaker permit both external and internal turning, provided the holder offers sufficient rigidity and correct seating. What advantage does the AH110 grade offer? AH110 combines wear resistance and fracture toughness suitable for stable machining conditions, offering consistent tool life and process security in turning operations. Which features most affect surface finish? The corner radius of 0.8 mm and the positive cutting geometry from the 0° clearance angle influence achievable surface finish; paired with a stable holder and correct feed, the insert supports fine surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
The combination of a PVD‑coated cemented carbide substrate, a sharp 0.8 mm corner radius and a process‑secure double‑sided chipbreaker ensures reliable turning performance and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. TNMG 160408 AH120 ISO turning insert — triangular, PVD‑coated carbide, Tungaloy A TNMG 160408 AH120 is an ISO‑standard triangular turning insert engineered for external and internal turning, offering high wear resistance and stable cutting performance in a broad range of turning tasks ISO‑standard triangular insert PVD‑coated cemented carbide for wear resistance Double‑sided chipbreaker for stable chip control Cylindrical hole; compatible with ISO holders High reliability for demanding turning operations The insert is built on a cemented carbide substrate with a PVD coating classified under the AH120 grade, which provides a good balance between wear resistance and fracture toughness. This combination reduces flank wear and maintains a sharp edge over longer tool life, making the component especially suitable where both a keen cutting edge and process security are required. The 60° geometry and 0.8 mm corner radius contribute to repeatable dimensional accuracy and help to achieve consistent surface finish in external and internal turning. For engineers selecting cutting data, the AH120 grade typically allows conservative feeds with improved edge stability, reducing the risk of premature chipping in interrupted cuts. Practical advantages in the workshop and on the shop floor As an ISO turning insert the plate integrates into standard toolholder systems when matched by form, clearance, tolerance class, clamp method, size and thickness. The triangular plate with a cylindrical hole and a nominal thickness of 4.76 mm offers secure fixation and simple indexation. The double‑sided chipbreaker design supports predictable chip formation and evacuation, which in turn eases coolant and cycle planning and improves cycle time reliability. For production planners the result is fewer unplanned tool changes and a steadier process window, which helps to optimise throughput and reduce downtime. Application guidance and material versatility This insert is specified for turning and is recommended where a robust, wear‑resistant grade is needed. The plate is suitable for both external and internal turning when the matching holder or boring bar is used, and the choice of chipbreaker and grade should be aligned with workpiece material and machining stability. Typical setups benefit from the 60° lead angle when machining common steels or mixed batches; the PVD layer on the AH120 grade enhances performance when run at moderate to elevated cutting speeds. In practice, selecting a slightly lower feed with the 0° clearance angle can protect the cutting edge in low‑rigidity applications while preserving surface quality. For technical advice, availability checks or to procure the TNMG 160408 AH120 from Metav Werkzeuge, contact Metav Werkzeuge’s consultancy by email or phone for fast, application‑oriented support Technical data Article number: 6810348 Manufacturer SKU: TUN6810348 SKU: 6810348-Tungaloy Facts Geometry angle: 60° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 16 (ISO designation 160408) Clearance (relief) angle: 0° Hole: with cylindrical hole Number of usable edges: double‑sided Special features Material: cemented carbide Grade: AH120 (PVD coated) Plate shape: triangular Chipbreaker: double‑sided Application: turning (external and internal) Compatibility: ISO‑standard holders and boring bars FAQ What materials is this insert suitable for? The AH120‑graded PVD‑coated cemented carbide insert is intended for turning a wide range of materials; selection of the chipbreaker and cutting data should be adapted to the specific workpiece material and machining stability. How does the double‑sided chipbreaker affect performance? A double‑sided chipbreaker provides reproducible chip formation and evacuation in both index positions, improving process stability and reducing the frequency of tool‑related interruptions when using the TNMG 160408 AH120 insert. What are the key dimensions to check when fitting the insert? Check the ISO designation (160408), the plate thickness of 4.76 mm, the 60° geometry and the cylindrical hole for correct compatibility with the chosen holder; these determine fit and clamp method. How many indexable edges are available per insert? The triangular TNMG form offers two usable edges per side with a double‑sided configuration, enabling multiple indexings before replacement. Is the insert suitable for interrupted cuts? The AH120 grade combines wear resistance with edge robustness; it is appropriate for many interrupted cutting scenarios, though cutting parameters and fixture rigidity should be considered to prevent chipping. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH120 carbide grade and the 0.8 mm corner radius for stable, repeatable turning results; the triangular, ISO-standard geometry and cylindrical-hole fastening ensure reliable clamping and simple replacement. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 160408 AH120 Turning Insert — PVD-coated carbide, 0.8 mm corner radius (Tungaloy) The TNMG160408 AH120 is a triangular ISO-standard turning insert engineered for external and internal turning where a sharp cutting edge and process security are required. PVD-coated AH120 for high wear resistance Sharp cutting edge and process security Double-sided chipbreaker for economical use Triangular 60° form with 0.8 mm corner radius Engineered for consistent cutting performance The insert is supplied in a PVD-coated carbide grade (AH120) that combines wear resistance with resistance to chipping, resulting in extended tool life and fewer interruptions. The PVD layer reduces abrasive wear and stabilises the cutting edge under varying cutting conditions; as a consequence, machining runs can be planned with greater confidence. For operations where consistent surface quality and predictable tool change intervals matter, this specification supports improved productivity and reduced scrap rates. Optimised geometry for secure clamping and predictable results The triangular, 60° geometry and the cylindrical hole ensure secure fastening in compatible holders, while the 0° relief provides a defined cutting orientation for routine turning tasks. The insert thickness of 4.76 mm and the ISO designation make it straightforward to match the component with standard external holders or boring bars. Because compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, selecting a matching holder guarantees repeatable clamping and minimal run-out, which in turn improves dimensional accuracy. Cost-efficient performance through double-sided design A double-sided chipbreaker extends usable life by allowing multiple cutting edges to be indexed before replacement, reducing tooling costs per part. The 0.8 mm corner radius strikes a balance between edge strength and surface finish: a rounded corner reduces edge chipping risk while still enabling a good surface quality in general turning. This combination is especially advantageous for batch production where tool-change frequency and predictable wear behaviour have a direct impact on operating costs. Integration into the machining process and selection guidance The indexable insert is part of a system consisting of the ISO insert, a matching external holder or boring bar, clamping seat and fastening screw. For best results, the chipbreaker and grade should be chosen according to workpiece material, machining style and machine-tool rigidity: a stable setup reduces vibrations and preserves the sharp cutting edge. Technical consultants can advise on matching insert geometry and chip control to the machining scenario, enabling fewer test cuts and faster process ramp-up. For genuine Tungaloy TNMG160408 AH120 inserts and tailored advice on holder compatibility, contact Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 — for a prompt, application-focused recommendation Technical Data Article number: 6812050 SKU: 6812050-Tungaloy Manufacturer SKU: TUN6812050 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Material: carbide Coating: PVD Grade: AH120 (wear- and break-resistant) Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning ISO designation: 160408 Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNMG160408 AH120 insert is a general-purpose turning grade; the AH120 PVD-coated carbide is designed for wear resistance and process security across a broad range of turning jobs—selection of the correct chipbreaker and cutting data should be based on the specific workpiece material. How many usable edges does the insert provide? With a triangular form and a double-sided chipbreaker, the insert offers multiple indexable edges; the design helps to reduce tooling cost per edge and enables economical edge changes during production. What does the 0.8 mm corner radius influence in machining? A corner radius of 0.8 mm increases edge strength and reduces the likelihood of chipping while maintaining a good surface finish in typical turning operations; it is a compromise between robustness and fine surface quality. Is the insert compatible with standard ISO holders? The insert follows ISO designation 160408; compatibility with a holder depends on matching form, relief angle, tolerance class, fastening, size and thickness, so use a holder specified for TNMG160408-style inserts. What benefit does the PVD coating bring? The PVD coating on the AH120 grade reduces abrasive wear and improves edge life under variable cutting conditions, supporting longer tool life and more consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade with wear- and fracture-resistant performance and ISO conformity for predictable indexing and process security. Order the TNMG160408 AH120 turning insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and clamping recommendations. TNMG160408 AH120 TNMG turning insert for Drehen — Tungaloy TNMG160408 AH120 is an ISO-standard triangular turning insert designed for general external and internal turning applications where a sharp cutting edge and process stability are required. PVD-coated carbide for stable cutting Wear- and fracture-resistant grade AH120 ISO TNMG160408 triangular insert with hole Double-sided chipbreaker, 0° clearance angle Reliable cutting performance for continuous turning processes The PVD-coated carbide substrate in this grade delivers a combination of wear resistance and edge stability intended for repetitive turning, making it suitable where consistent component quality is essential. The insert’s geometry — triangular form with a 60° included angle and a 0° clearance angle — supports secure seating in standard ISO holders and a predictable cutting orientation. The double-sided chipbreaker contributes to controlled chip formation, which reduces rework and helps maintain toolpath stability over longer production runs. This results in fewer interruptions for indexing or replacement and supports higher overall machine utilisation. Efficiency gains through chip control and reduced changeover A clear, measured benefit of the AH120 grade is improved chip control, which facilitates safer swarf evacuation and minimises the risk of surface damage on workpieces. The PVD layer enhances resistance to abrasive wear while preserving a sharp cutting edge for longer, which translates into extended tool life and lower tooling consumption per part. For operations seeking to lower cycle time variance and improve first-pass yield, the combination of coating, grade and chipbreaker geometry offers a tangible productivity advantage without complex process adjustments. Seamless integration with ISO toolholding and predictable indexing As an ISO-series insert, compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; the TNMG160408 AH120 is supplied with a cylindrical hole for positive clamping and a plate thickness of 4.76 mm that matches common ISO TNMG pockets. The triangular shape provides multiple indexing positions, making the insert an economical choice where repeatable seating and quick index changes are required. For complex setups, reference the holder’s specification sheet to confirm matching tolerance classes and clamping hardware — this approach ensures reliable seating and repeatable part tolerances during production. Durable grade selection for demanding process requirements The AH120 designation denotes a wear- and fracture-resistant turning grade that balances edge sharpness with robustness. This makes the insert suitable in scenarios where small to moderate interruptions in the cutting edge can occur and where process security is prioritised over extreme high-speed cutting. The PVD coating supports stable cutting at common finishing and medium-turning conditions, helping to maintain surface quality and dimensional repeatability across batches. Where corner radii and surface finish are critical, the specified 0.8 mm corner radius offers a compromise between edge strength and profile definition. For reliable, original Tungaloy TNMG160408 AH120 inserts and advice on holder selection or application optimisation, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will assist with technical matching and supply. Technical data Article number: 6854302 Manufacturer SKU: TUN6854302 Metav SKU: 6854302-Tungaloy Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole Special features Grade: AH120 Coating: PVD Material: carbide Shape: triangular Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What applications is this insert intended for? The TNMG160408 AH120 turning insert is specified for external and internal turning where a sharp cutting edge and process stability are required. How is compatibility with a holder determined? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG160408 AH120 has a triangular form, 4.76 mm thickness and a cylindrical hole for clamping. What does the AH120 grade signify? AH120 denotes a PVD-coated, wear- and fracture-resistant carbide grade intended to combine edge sharpness with process security in turning applications using the TNMG160408 AH120 insert. Which dimensions are most relevant when ordering replacements? Key dimensions for replacement are the ISO designation 160408, insert size 16 mm, plate thickness 4.76 mm, corner radius 0.8 mm and included angle 60°; the manufacturer SKU TUN6854302 can be used for precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, a 0.8 mm corner radius and proven ISO TNMG geometry for dependable turning performance; order original inserts directly via Metav Werkzeuge or consult our specialists for tailored cutting data. TNMG160408 AH120 turning insert – Tungaloy TNMG160408 AH120 is a triangular, ISO‑standard indexable insert designed for robust external and internal turning in industrial applications. ISO TNMG geometry, triangular insert PVD-coated carbide, grade AH120 Double-sided chipbreaker for consistent chips 0.8 mm corner radius, 60° included angle Consistent edge quality for secure machining The triangular indexable insert delivers a stable cutting edge that supports reliable chip control and repeatable results in series production. The PVD coating on the carbide substrate provides wear resistance and helps maintain a sharp edge, which reduces the risk of built-up edge and unexpected edge chipping. With a 0.8 mm corner radius and a 60° included angle, this geometry balances edge strength and cutting performance, making it suitable for operations that require a clean surface finish while maintaining robust tool life. The combination of coating and substrate ensures consistent removal rates and predictable regrind cycles. Optimised process stability and longer tool life The AH120 grade is engineered for a compromise between toughness and wear resistance, giving improved resistance to flank wear and occasional interruptions in the cut. The double-sided chipbreaker design supports controlled chip formation on both orientations, extending usable life by enabling indexable re-use of the opposite cutting edge. These characteristics contribute directly to higher process stability: fewer tool changes, less downtime, and more predictable cycle times. For production environments where reproducibility and low variation matter, the insert’s specification reduces machining risk and supports cost-efficient throughput. Straightforward fitment and broad ISO compatibility Fitting into standard ISO turning systems, the insert features a cylindrical hole for secure clamping and a plate thickness of 4.76 mm, ensuring correct seating and repeatable clamping forces in compatible holders. The insert’s 16 mm size and ISO designation simplify tooling choices across many holders and boring bars, limiting the need for bespoke adapters. Technical teams benefit from clear interchangeability: the insert matches common external and internal turning set-ups and integrates into a system comprising suitable holders, clamping sets and replacement screws for quick reconditioning on the shop floor. For original Tungaloy inserts and application-specific cutting recommendations based on the AH120 grade, contact Metav Werkzeuge for expert guidance and availability Technical data Article number: 6812054 Manufacturer SKU: TUN6812054 Metav SKU: 6812054-Tungaloy Designation: TNMG160408 AH120 Shape: triangular Hole: with cylindrical hole Core specifications ISO designation: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Features and materials Material: carbide (Hartmetall) Coating: PVD, grade AH120 Chipbreaker: double-sided Application: turning (external and internal) Compatible with ISO turning holders FAQ What machining tasks is this insert intended for? The TNMG160408 AH120 insert is designed for external and internal turning, offering a balance of edge strength and surface quality for routine turning operations. How does the AH120 grade affect performance? The AH120 grade combines wear resistance and toughness; in the TNMG160408 it supports a sharp cutting edge while delivering consistent tool life under varying turning conditions. Can the insert be indexed to use multiple cutting edges? Yes, the triangular geometry and double-sided chipbreaker allow indexing of unused edges, increasing the number of available cutting edges per insert and improving overall economy. What are the key dimensions to check when selecting a holder? Verify the ISO designation 160408, 16 mm size, 4.76 mm thickness and the 60° included angle to ensure correct fitment and clamping with compatible holders. Which SKU identifies this original Tungaloy insert? Original items are listed under article number 6812054 and manufacturer SKU TUN6812054 for unambiguous procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
Take advantage of the AH120 grade and PVD-coated carbide for a reliable, sharp cutting edge and consistent process security; the ISO compatibility and triangular, double-sided design help reduce tooling costs and simplify reindexing. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. TNMG160408 AH120 TNMG turning insert – PVD-coated carbide, 60° triangle, Tungaloy TNMG160408 AH120 Tungaloy turning insert for external and internal turning in standard ISO holders, designed for stable chip formation and secure clamping PVD-coated carbide for high process reliability Sharp cutting edge and wear-resistant AH120 Double-sided triangular geometry with cylindrical hole 0.8 mm corner radius, 60° included angle Proven performance and measurable efficiency for turning operations The combination of a PVD-coated carbide substrate and the AH120 grade gives a balance of wear resistance and fracture toughness that improves tool life under varied cutting conditions. The coating reduces adhesion and enhances thermal stability, which translates into fewer tool changes and steadier cycle times. With a sharp cutting edge and optimised chip control, the insert supports higher metal removal rates while maintaining dimensional consistency, so production runs remain predictable and economical. Simple integration with ISO systems and clear mounting requirements As an ISO-compliant, triangular indexable insert, the TNMG160408 is compatible with standard holders when form, relief angle, tolerance class, clamping method, size and thickness match. The cylindrical hole and precise tolerances facilitate secure clamping and repeatable positioning in the holder. Thickness of 4.76 mm and a plate size of 16 mm provide rigidity for a wide range of external and internal turning tasks; the double-sided design enables reindexing to a fresh cutting edge, improving cost efficiency per edge. Geometry tuned for surface quality and edge stability The 0.8 mm corner radius and 60° included angle deliver a good compromise between edge strength and surface finish: the radius absorbs occasional cutting shocks, while the acute geometry allows accurate profiling and finishing passes. The double-sided triangular layout yields multiple usable edges, reducing downtime for insert changes. For operations where a fine surface and consistent tolerance are priorities, this geometry supports stable cutting forces and improved repeatability. Select chipbreaker and grade to match workpiece and process stability Intended for turning (external and internal), the insert performs best when the doppelseitig chipbreaker and the AH120 grade are chosen according to the workpiece material, cutting method and machine stability. The system comprises the ISO turning insert, a matching external holder or boring bar, and the required clamp or shim set plus fastening screws. For less familiar applications, consultation on chipbreaker selection and cutting parameters ensures the right compromise between surface finish and tool life. For process-focused workshops seeking consistent results with Tungaloy’s AH120 grade, contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6814923-Tungaloy Manufacturer SKU: TUN6814923 Manufacturer article number: 6814923 Type / designation: TNMG160408 Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Size: 16 mm Included angle: 60° Special features / Versions PVD-coated carbide grade AH120 Double-sided triangular insert with chipbreaker Cylindrical hole for secure clamping ISO-standard turning insert series Typical application: external and internal turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What applications suit this insert best? This insert is intended for turning applications — both external and internal — where ISO-standard inserts are used; the AH120 grade and PVD coating support stable, productive machining. How is the TNMG160408 mounted in the holder? The TNMG160408 uses a cylindrical hole and standard clamp or screw systems; compatibility depends on the holder’s form, relief angle and tolerance class to ensure secure and repeatable clamping. Can the insert be reindexed and how many edges are usable? The triangular, double-sided design allows multiple reindexes; each side provides fresh cutting edges, improving per-edge economy and reducing tool changes. Which advantages does the AH120 grade provide? AH120 offers a wear- and breakage-resistant performance with a sharp cutting edge and good process reliability, making it suitable where edge integrity and consistent results are required. Does the geometry affect surface finish? Yes — the 0.8 mm corner radius and 60° included angle balance edge strength with surface quality, supporting fine finishing and steady cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH120 Wendeplatten - Tungaloy
A reliable choice for precision turning: PVD-coated carbide for durable cutting and a 0.8 mm corner radius for consistent edge stability. Compatible with ISO holders thanks to standardised geometry; order directly via Metav Werkzeuge or consult the team for application advice. TNMG 160408 AH120 – TNMG160408 AH120 Turning Insert by Tungaloy The TNMG160408 AH120 is an ISO-standard triangular turning insert designed for external and internal turning operations in industrial machining. PVD-coated carbide for wear resistance Sharp cutting edge and process security ISO-standard geometry for holder compatibility Double-sided chipbreaker for economical use Reliable cutting performance for continuous production The insert delivers consistent material removal thanks to its PVD-coated carbide substrate and the AH120 grade, which combines wear resistance with high edge integrity. The sharp cutting edge and optimised chip control reduce the risk of built-up edge and unexpected breakouts, supporting predictable cycle times. For production environments where repeatability matters, this geometry contributes to stable tool life and fewer interruptions to machining sequences. Secure clamping and straightforward holder matching Compatibility with the clamping system is governed by the insert’s form, 0° clearance, tolerance class, fastening method, size and thickness. The ISO-standard triangular form and the cylindrical locating hole ensure reliable seating in a matching external holder or boring bar. Selecting the correct outer holder and the recommended backing/clip set with replacement screws secures the insert and maintains concentricity during turning cycles. Material and coating engineered for longevity Manufactured from a wear-resistant carbide grade and finished with a PVD coating (AH120), the plate is engineered to withstand abrasive and adhesive wear while preserving a fine cutting edge. The combination is particularly suited where a sharp cutting edge and process security are both required, balancing surface finish and edge life. The 0.8 mm corner radius gives a robust transition that reduces chipping risk on interrupted cuts. Practical application guidance for process optimisation Intended for general turning, the insert is suitable for both external and internal operations; the double-sided chipbreaker offers two usable edges, improving cost efficiency per index. Choose the chipbreaker and grade according to workpiece material and machining stability: smoother conditions benefit from smaller radii, while heavier interrupted cuts favour larger radii and stiffer setups. Integration into an ISO-based system is straightforward when holder form and thickness are matched. For application recommendations or to obtain genuine Tungaloy inserts promptly, contact Metav Werkzeuge for technical consultation and fast availability – info@metav-werkzeuge.com / +49 2822 7131930. Technical Data Article number: 6808477 Manufacturer SKU: TUN6808477 Label: TNMG160408 AH120 Tungaloy-Wendeplatte Manufacturer: Tungaloy Facts Shape: triangular Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° ISO designation: 160408 Included hole: with hole (cylindrical) Insert angle: 60° Special features Material: carbide Coating / grade: AH120 (PVD-coated) Chipbreaker: double-sided Typical use: turning (external and internal) System components: ISO insert, matching external holder or boring bar, backing/clip set, replacement screws FAQ What workpiece materials are suitable for this insert? The TNMG160408 AH120 insert is intended for a broad range of materials; the PVD-coated AH120 grade is optimised for wear resistance and is suitable when a sharp cutting edge and process security are required. Is the insert reversible and how many cutting edges are available? This triangular insert is double-sided with a chipbreaker on each usable face, offering multiple indexing options to extend effective tool life. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, reducing the likelihood of chipping on interrupted cuts while still enabling good surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade that balances a sharp but stable cutting edge with reliable performance in stainless steel turning; choose the TNMG160408 AH6225 insert for consistent results and contact Metav Werkzeuge for application guidance or ordering support. TNMG160408 AH6225 ISO indexable turning insert — Tungaloy, PVD-coated carbide, 60° TNMG160408 AH6225 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a universal grade for stainless steels and a stable cutting edge suited to medium machining and varying conditions. PVD-coated carbide AH6225 for durability Optimised for machining stainless steels 0.8 mm corner radius for precise contours Double-sided chipbreaker with cylindrical centre hole Consistent cutting performance for stainless steel turning The combination of a PVD coating and a wear‑resistant carbide substrate provides an excellent compromise between edge sharpness and durability. This configuration reduces flank wear during interrupted cuts and helps maintain a repeatable tool life under changing conditions. For workshops aiming to keep cycle times stable, the AH6225 grade is formulated to handle the demands of stainless steel turning without frequent insert changes, delivering predictable removal rates and surface quality. Better chip control and geometry that simplifies setup The double-sided chipbreaker geometry is engineered to produce controlled chips across a range of feeds and depths of cut, which lowers the risk of built‑up edge and improves surface finish. The insert’s 0.8 mm corner radius supports fine contouring while the 60° cutting angle contributes to balanced cutting forces. For those less familiar with insert specs: a smaller corner radius enables finer detail, whereas the chipbreaker helps break and evacuate chips to protect both the workpiece and the toolholder. Designed for straightforward compatibility and secure clamping As an ISO standard insert, the form, relief angle, tolerance class, fixing method, size and thickness determine compatibility with holders. This insert features a cylindrical centre hole, triangular shape and a 4.76 mm thickness, so it mates with common TNMG‑style turning holders. The standardised geometry simplifies inventory management and reduces the risk of mixing incompatible parts, making it easier to select the correct holder and fastening hardware for routine production tasks. Grade and coating advantages that support productivity The AH6225 grade is a PVD‑coated option optimised for a broad range of stainless steels; it emphasises stable edge behaviour and broad material coverage. A hard, low‑friction coating helps resist adhesion and reduces the frequency of regrinds or insert changes. In practice, this leads to steadier component quality and can contribute to lower overall tooling costs through extended service intervals and fewer process disruptions. Contact Metav Werkzeuge for specification checks, application advice or to request the Tungaloy TNMG160408 AH6225 inserts (SKU TUN6827240) for your turning operations Technical data Article number: 6827240 Manufacturer SKU: TUN6827240 SKU: 6827240-Tungaloy Model series: ISO indexable turning inserts Application: Turning Label: TNMG160408 AH6225 Tungaloy indexable insert Facts Inscribed circle: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 60° Grade: AH6225 Special features PVD coating Carbide substrate Double-sided chipbreaker Triangular plate shape Cylindrical centre hole Universal grade for stainless steels FAQ What materials is this insert suitable for? The TNMG160408 AH6225 indexable insert is formulated primarily for stainless steel machining; the AH6225 grade provides broad coverage for various austenitic and duplex grades. How does the 0.8 mm corner radius affect component finish? A 0.8 mm corner radius offers a balance between fine detail and edge strength, producing good surface finish while still tolerating moderate cutting forces when using the TNMG160408 AH6225 insert. Is the insert reversible or single-use per edge? This is a double-sided, triangular indexable insert, so it provides multiple usable cutting edges before replacement, improving economy in serial production. Which holder characteristics determine compatibility with this insert? Compatibility depends on holder form, relief angle, tolerance class, fixation method, size and thickness; the TNMG160408 geometry and a cylindrical centre hole are standard for TNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com