TNMG 160408 AH8005 Wendeplatten - Tungaloy
Combine the high wear resistance of a PVD-coated AH8005 carbide grade with reliable chip control and ISO compatibility for consistent turning results. Order the inserts directly via Metav Werkzeuge or request tailored advice from our consultants. TNMG 160408 AH8005 Tungaloy turning insert — PVD-coated carbide, 0.8 mm nose radius, 60° triangular The TNMG160408 AH8005 is a triangular ISO turning insert engineered for external and internal turning, optimised for heat‑resistant alloys and other hard materials PVD-coated carbide for wear resistance Optimised for heat-resistant alloys Double-sided chipbreaker for stability Proven wear resistance for demanding alloys Offering a balance of longevity and predictability, the TNMG160408 AH8005 is aimed at stable machining operations where tool life and process repeatability matter. The PVD-coated carbide grade AH8005 resists abrasive and thermal wear when cutting heat‑resistant alloys and hardened workpieces, which reduces flank wear and the need for frequent indexings. This results in longer continuous cutting intervals and improved overall equipment effectiveness on serial and batch turning tasks. Controlled chip formation and improved surface quality Process stability and surface finish are supported by the insert geometry and chipforming design. The double-sided chipbreaker together with the 60° triangular profile and the 0° rake generate predictable chips and steady cutting forces. As a consequence, vibration is minimised and edge chipping risk is reduced, enabling higher material removal rates and consistent part tolerances. Fewer interruptions for chip clearing contribute to more efficient cycle times. ISO compatibility and practical mounting guidance Correct mounting is essential: compatibility is determined by holder form, relief angle, tolerance class, fastening, size and thickness. As an ISO-standard insert in the 160408 family with a cylindrical hole and 4.76 mm thickness, it is suitable for holders designed for this geometry; the 0.8 mm nose radius offers a compromise between cutting-edge strength and surface finish. Selecting the matching chipbreaker and adapting feeds and speeds to the workpiece material will optimise life and machining economy. For tailored selection support on Tungaloy turning inserts such as the TNMG160408 AH8005, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6775768 Manufacturer SKU: TUN6775768 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Cutting angle: 60° Rake angle: 0° ISO designation: 160408 Hole style: cylindrical Special features Material: carbide Grade/coating: AH8005 (PVD-coated) Geometry: triangular, double-sided Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO-standard insert; holder must match form and tolerance FAQ Which materials is this insert best suited for? The TNMG160408 AH8005 Tungaloy turning insert is optimised for heat‑resistant alloys and other hard materials; the AH8005 grade provides enhanced wear resistance under stable cutting conditions. How is compatibility with a holder determined? Compatibility is governed by holder form, relief angle, tolerance class, fastening type, insert size and thickness; the TNMG160408 requires a holder that accepts ISO‑160408 triangular inserts with 4.76 mm thickness and a cylindrical hole. Can this insert be used for internal turning operations? Yes, the insert is intended for both external and internal turning when mounted in a suitable holder and used with the correct feeds and speeds. What advantages does the chipbreaker bring? The double‑sided chipbreaker improves chip control and surface finish, reducing interruptions and supporting stable cutting forces for repeatable part quality. What are the article number and SKU for ordering? Article number 6775768 and SKU 6775768-Tungaloy identify this specific TNMG160408 AH8005 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8005 Wendeplatten - Tungaloy
Combining PVD-coated carbide durability with ISO compatibility and a compact 60° triangular geometry, this insert provides stable performance for external and internal turning of heat-resistant alloys and hard materials. Order directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker recommendations to match machine stability and workpiece material. TNMG 160408 AH8005 turning insert — Tungaloy, 60° triangular PVD carbide The TNMG160408 AH8005 is an ISO triangular turning insert engineered for stable external and internal turning of heat-resistant alloys and other demanding materials, offering a robust grade and precise geometry for repeatable results. ISO triangular 60° geometry PVD-coated carbide grade AH8005 0.8 mm corner radius for durability Double-sided chipbreaker, cylindrical hole Reliable wear resistance for heat-resistant alloys The combination of a PVD-coated surface and a wear-resistant carbide substrate in grade AH8005 gives the insert excellent performance at elevated temperatures and in demanding cuts. The coating reduces flank wear and adhesion when machining high-temperature alloys, while the substrate maintains edge strength; this synergy extends cutting life and supports consistent cycle times. As a result, throughput remains stable even under repetitive production conditions. ISO format and straightforward holder compatibility Built to the ISO specification, the insert’s geometry and dimensions simplify selection of a matching external holder or boring bar. Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness — here ISO TNMG 160408 with a 4.76 mm thickness and a cylindrical hole for positive clamping. The 60° triangle and standard dimensions permit rapid integration into existing tool systems, reducing setup time and ensuring predictable tool behaviour across comparable machines. Design choices that cut downtime and improve surface finish A double-sided chipbreaker and triangular shape allow multiple usable edges before replacement, lowering tool change frequency and helping maintain consistent surface quality. The 0.8 mm corner radius supports both light finishing and moderately heavy cuts, balancing strength and edge definition to avoid chatter on stable setups. The overall plate thickness contributes to rigidity; combined with an appropriate chipbreaker and the right insert grade, this results in reliable chip control and fewer interruptions on the shopfloor. For supply, specification advice or to secure the Tungaloy TNMG160408 AH8005 insert for demanding turning tasks, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-oriented guidance Technical data Article number: 6741689 Manufacturer SKU: TUN6741689 SKU: 6741689-Tungaloy Model series: ISO turning inserts Facts Geometry: 60° Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Special features Material: carbide Coating: PVD Chipbreaker: double-sided Hole: cylindrical Relief angle: 0° Shape: triangular Application: turning (external and internal) Grade: AH8005 — wear-resistant for heat-resistant alloys and hard materials FAQ Is this insert compatible with standard TNMG holders? The TNMG160408 AH8005 Tungaloy turning insert follows ISO sizing, so compatibility depends on matching the holder’s form, relief angle, tolerance class, clamping method and plate dimensions rather than on the insert alone. Which workpiece materials suit the AH8005 grade? The AH8005 grade on this insert is formulated for wear resistance in heat-resistant alloys and other hard materials; it performs well when a stable set-up and appropriate cutting data are used. What benefits does the PVD coating provide? The PVD-coated surface reduces adhesion and abrasion at elevated temperatures, improving flank wear resistance and allowing longer effective cutting life for the TNMG160408 insert when machining demanding alloys. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker supplies multiple usable edges and predictable chip formation, which lowers tool change frequency and helps keep cycle times consistent in production. Can the 0.8 mm corner radius be used for finishing passes? Yes, the 0.8 mm radius offers a compromise between edge strength and finish capability; it is suitable for light finishing and semi-finishing cuts on rigid setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide (AH8005) for high wear resistance and the ISO TNMG160408 form for broad holder compatibility, ensuring stable and productive turning of hard or heat-resistant materials; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160408 AH8005 Tungaloy turning insert – 60° triangular PVD-coated carbide The TNMG 160408 AH8005 Tungaloy turning insert is an ISO-formatted triangular indexable insert designed for external and internal turning of hard and heat-resistant materials. PVD-coated carbide AH8005 for wear resistance Triangular 60° format with cylindrical hole Double-sided chipbreaker for reliable chip control Compatible with ISO TNMG holder systems Boosted tool life and consistent edge performance The PVD-coated carbide grade AH8005 combines a wear-resistant coating with a robust substrate to extend tool life when machining demanding alloys. In practice, this means fewer insert changes and longer uninterrupted production runs. The triangular geometry, with a defined 60° cutting angle and a 0.8 mm corner radius, provides a predictable cutting edge for finishing and medium turning operations. Operators and process planners benefit from the repeatable behaviour of this insert, which contributes to stable cutting forces and consistent surface quality on workpieces made from heat-resistant alloys and other tough materials. Productivity through controlled chip formation and system compatibility Equipped with a double-sided chipbreaker, the insert delivers improved chip control across a range of depths of cut and feeds, reducing the risk of entanglement and protecting the workpiece surface. Being double-sided effectively doubles the available cutting edges per index, which enhances cost-efficiency. The ISO designation and standardised dimensions ensure compatibility with common TNMG holders; compatibility depends on form, clearance angle, tolerance class, fastening style, size and thickness, so the insert can be integrated into existing holder systems with minimal adaptation. The cylindrical-hole design facilitates secure clamping and simple indexing, supporting fast changeovers and stable clamping under moderate to heavy machining conditions. Practical selection, handling and application guidance Choosing the correct chipbreaker and grade is essential: the AH8005 grade is optimised for abrasive and heat-resistant workpiece materials, while the chipbreaker geometry should match the intended feed and depth of cut to achieve the best surface finish. The insert forms part of a system that typically includes a compatible external holder or boring bar, a backing shim or clamp set, and replacement screws. Check the holder’s specifications for seat angle and tolerance to ensure precise seating. For shops transitioning from general-purpose grades to AH8005, expect improved edge stability and extended tool life when machining alloys that generate high temperatures at the cutting zone. For tailored application recommendations on the Tungaloy AH8005 turning insert and to confirm holder compatibility or stock availability, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisors will assist with selection and ordering. Technical Data Article number: 6741693 Manufacturer article number: 6741693 SKU: 6741693-Tungaloy Manufacturer SKU: TUN6741693 Data Angle: 60° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 16 mm Special features Format: Triangular insert with cylindrical hole Coating: PVD-coated carbide (AH8005) Chipbreaker: Double-sided Application: Turning (external and internal) Compatibility: ISO TNMG 160408 series FAQ What materials is this insert suitable for? The TNMG 160408 AH8005 Tungaloy insert is designed for hard and heat-resistant alloys and performs well where high wear resistance is required. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker provides reliable chip control and doubles the available cutting edges, which reduces changeover frequency and improves uptime with the TNMG160408 configuration. Is the insert compatible with standard TNMG holders? Compatibility with standard TNMG holders depends on holder form, clearance angle, tolerance class, fastening and thickness; the TNMG160408 format follows ISO dimensions, facilitating integration with matching holders. What advantage does the AH8005 grade offer over uncoated alternatives? The AH8005 PVD coating increases wear resistance and thermal stability compared with uncoated grades, resulting in longer tool life and more consistent cutting-edge performance under elevated temperatures. Can this insert be used for both finishing and medium turning? Yes, the triangular 60° geometry with a 0.8 mm corner radius allows use in finishing and medium turning, offering a good balance between edge strength and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of proven wear resistance, precise geometry and ISO compatibility for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. TNMG 160408 AH8015 — ISO turning insert by Tungaloy for general turning of heat-resistant alloys TNMG160408 AH8015 Tungaloy insert for ISO-spec turning applications, triangular, double-sided with cylindrical hole TNMG160408 triangular ISO insert PVD-coated carbide grade AH8015 Suited for heat-resistant alloys Double-sided insert with central hole Reliable cutting performance for demanding turning operations The combination of PVD-coated carbide in grade AH8015 delivers a balanced mix of wear resistance and cutting-edge stability, making this insert especially suited to the machining of heat-resistant alloys. The result is consistent, repeatable performance even under elevated cutting temperatures. The 0.8 mm corner radius gives a compromise between edge strength and achievable surface finish, reducing the risk of premature chipping while still enabling tight dimensional control. For shops seeking fewer tool changes and predictable tool life, this geometry supports stable processes and helps to maintain cycle-time targets. Easy integration with ISO toolholder systems and secure clamping Designed as an ISO-standard triangular insert, the part is compatible with a wide range of external holders when form, clearance angle, tolerance class, fastening and thickness are matched. The triangular shape and central cylindrical hole ensure positive location and simple indexing; being double-sided doubles the number of available cutting edges before disposal. Compatibility relies on mechanical fit: match the insert size, thickness and hole style to the holder specification. If clarification is needed, our consultants can confirm holder selection and clamping parameters to avoid trial-and-error in the workshop. For quick queries: info@metav-werkzeuge.com or +49 2822 7131930. Improve process economy and surface quality with optimised chip control The integrated double-sided chipbreaker and the material pairing of grade AH8015 support controlled chip formation and evacuation, which reduces interruptions and improves part finish. Better chip control lowers the risk of rework and tool-related downtime, while the robust cutting edge increases the number of parts produced per index, improving overall tool life. Shops machining heat-resistant materials will notice more consistent surface integrity and fewer edge failures, translating into measurable gains in productivity and reduced scrap rates. The combination of material, coating and geometry is geared towards reliable, everyday performance in industrial turning. Contact Metav Werkzeuge today to specify the TNMG160408 AH8015 insert for current holders or to request application advice; Metav Werkzeuge will assist with matching, availability and order placement Technical data Article number: 6947369 Manufacturer SKU: TUN6947369 SKU: 6947369-Tungaloy Name: TNMG160408 AH8015 Tungaloy-Wendeplatte Numbers / Core technical data Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical hole Double-sided insert Designs / Special features PVD-coated carbide, grade AH8015 ISO turning indexable insert (triangular) Central hole for positive location Double-sided chipbreaker Suitable for turning of heat-resistant alloys FAQ What materials is this insert suitable for? This TNMG160408 AH8015 insert is designed primarily for heat-resistant alloys and offers a balanced performance for a range of tough materials. How does the AH8015 grade improve tool life? The AH8015 PVD-coated carbide provides enhanced wear resistance and edge stability, which increases the number of parts produced per cutting edge and improves overall tool life. Can the insert be used with existing ISO holders? Yes; the TNMG160408 insert fits ISO-standard triangular holders when thickness, size, hole style and fastening match the holder specification. How many cutting edges are available per insert? Being double-sided and triangular, the insert offers multiple cutting edges; indexing the insert doubles usable edges compared with single-sided types. What is the corner radius and how does it affect the finish? The corner radius is 0.8 mm; this radius balances edge strength and surface finish, reducing chipping risk while enabling good dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of PVD-coated cemented carbide AH8015 and a 0.8 mm corner radius for stable cutting performance in turning operations; the ISO 160408 triangular form and 60° geometry ensure compatibility with standard holders. Order directly via Metav Werkzeuge or request advice from the technical consultants for application-specific recommendations. TNMG 160408 AH8015 indexable insert for turning — Tungaloy The TNMG160408 AH8015 indexable insert is an ISO-standard triangular insert designed for general external and internal turning of heat‑resistant alloys, combining a PVD coating with a balanced carbide grade for wear resistance and edge stability. PVD-coated cemented carbide AH8015 0.8 mm corner radius for edge stability ISO 160408 triangular insert, 60° angle Double-sided chipbreaker, cylindrical hole High productivity from a balanced carbide and coating The combination of AH8015 grade cemented carbide and a PVD coating delivers a balanced mix of wear resistance and cutting-edge stability, making the insert well suited to the routine machining of heat‑resistant alloys. This results in predictable tool life and consistent surface finishes, which supports lean production and reduces unplanned tool changes. The slightly larger corner radius contributes to edge robustness, improving resistance to notch wear during interrupted cuts while maintaining acceptable surface quality. Clear compatibility and practical mounting guidance Designed to the ISO 160408 form with a 60° geometry and a cylindrical hole, the insert is compatible with holders that match the form, clearance, tolerance class, fastening method, size and thickness. The 0° clearance angle specifies the relief geometry required by the toolholder; a matched holder ensures correct seating and clamp force for stable cutting. The double‑sided chipbreaker provides two usable cutting edges per indexation, allowing economical usage without compromising chip control in many conventional turning setups. Application focus and selection advice for process security When selecting an insert grade and chipbreaker, attention to workpiece material and machining stability is essential. The AH8015 grade is the recommended first choice for the general machining of heat‑resistant alloys because it offers effective wear resistance while maintaining a stable cutting edge. For external and internal turning tasks, pairing the insert with a suitable outer holder, backing pad and replacement screws forms a complete system for reliable performance. The ISO series construction simplifies replacement and inventory management across machines and shifts. For process-critical turning applications prefer the Tungaloy AH8015 grade for consistent wear behaviour; contact Metav Werkzeuge for stock availability and machining recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6947354 Manufacturer SKU: TUN6947354 Model series: ISO indexable turning inserts Application: Turning Material: cemented carbide Grade: AH8015 Facts Insert designation: TNMG160408 Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 16 Geometry angle: 60° Clearance angle: 0° Mounting: with hole (cylindrical) Special features PVD‑coated cemented carbide Double‑sided chipbreaker Triangular insert form Cylindrical hole for fastening ISO‑standard design for holder compatibility Suited to heat‑resistant alloys and general turning FAQ What materials is this insert suitable for? The TNMG160408 AH8015 insert is formulated for the general machining of heat‑resistant alloys; its PVD coating and AH8015 carbide provide balanced wear resistance suitable for such applications. How does the 0° clearance angle affect mounting? A 0° clearance angle requires a toolholder that provides the correct relief and seating geometry; correct holder selection ensures stable clamping and optimal cutting conditions for the TNMG160408 AH8015 insert. Can both sides of the insert be used? Yes, the insert features a double‑sided chipbreaker, offering two indexable cutting edges per side and allowing economical rotation and reuse within the TNMG geometry. Which holder characteristics determine compatibility? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; matching these parameters to the ISO TNMG160408 form secures proper fit and function. Is this insert suitable for internal turning? The insert is designed for both external and internal turning when fitted into an appropriate boring bar or holder that accommodates the ISO TNMG160408 geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
A reliable choice for ISO‑compatible turning operations: the combination of PVD‑coated carbide AH8015, a 0.8 mm corner radius and a cylindrical hole for positive clamping ensures consistent edge life and stable machining of heat‑resistant alloys; order via Metav Werkzeuge or consult the technical team for application support. TNMG160408 AH8015 — TNMG 160408 AH8015 Turning Insert (PVD Carbide, R0.8) by Tungaloy A TNMG160408 AH8015 indexable turning insert engineered for ISO‑standard holders, designed for general‑purpose turning of heat‑resistant alloys and similar demanding materials. TNMG160408 ISO turning insert PVD-coated carbide AH8015 0.8 mm corner radius for fine finishes Cylindrical hole, double-sided chipbreaker Reliable machining at elevated temperatures The combination of PVD‑coated carbide and the AH8015 grade provides a balanced mix of wear resistance and edge stability, making the insert particularly suited to turning heat‑resistant alloys. The coating reduces adhesion and thermal softening at the cutting edge, so machining parameters can be increased compared with uncoated grades without sacrificing tool life. For production environments this translates into fewer insert changes and more predictable process windows, which supports higher throughput and reduced downtime. Stable clamping and consistent surface quality The cylindrical hole and the insert’s ISO‑compliant geometry ensure reproducible clamping and correct seating in compatible holders. The 0.8 mm corner radius contributes directly to surface finish and edge strength: a modest radius smooths chatter tendencies and produces a finer surface without compromising the robustness required for interrupted cuts. These characteristics make the insert effective for both shoulder turning and light finishing passes where dimensional control and surface integrity matter. Versatility for general turning tasks Designed as a general‑purpose solution, the triangular indexable insert with a double‑sided chipbreaker offers two usable edges per side and allows economical rotation during wear. The chipbreaker geometry supports controlled chip formation across a range of feed rates and depths of cut, improving chip evacuation and machine safety. The insert’s compatibility with ISO turning systems simplifies tool inventory management and enables rapid tool changes in mixed‑material production runs. Practical selection and application tips When choosing machining parameters, the AH8015 grade permits higher cutting speeds for heat‑resistant alloys while maintaining edge life; however, final settings should be validated under actual clamping stiffness and machine dynamics. For stable results, pair the insert with a rigid external holder and check insert seating after the first few cuts. For operators unfamiliar with coated grades, the PVD coating can be explained as a thin, hard film applied to the carbide substrate that reduces friction, increases thermal resistance and extends tool life under elevated temperatures. For availability, detailed cutting data or an application consultation for Tungaloy turning inserts, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947419 SKU: 6947419-Tungaloy Manufacturer SKU: TUN6947419 Manufacturer: Tungaloy Facts Insert designation: TNMG160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included hole: with hole (cylindrical) Geometry angle: 60° Special features Material: Carbide Grade/sort: AH8015 (PVD-coated) Model series: ISO turning inserts Insert shape: triangular Chipbreaker: double-sided Hole style: cylindrical hole Application: Turning Typical system: ISO insert + appropriate external holder and clamp set FAQ What materials is this insert best suited for? The TNMG160408 AH8015 insert is formulated for general‑purpose turning and performs well on heat‑resistant alloys, offering a balance of wear resistance and edge stability suitable for such materials. How does the AH8015 grade affect cutting performance? AH8015, as a PVD‑coated carbide, provides improved thermal resistance and reduced adhesion compared with uncoated grades, which helps maintain edge life at elevated cutting temperatures during hard or high‑temperature turning. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO turning insert conventions; compatibility is determined by insert form, relief angle, tolerance class, mounting and thickness, so ensure the holder matches the TNMG160408 geometry. How should the cylindrical hole be used during mounting? The cylindrical hole secures the insert positively in the pocket; correct torque and a matched clamp or washer ensure stable seating and repeatable positioning for consistent machining outcomes. How many cutting edges are available on this insert and how is the chip control handled? The triangular insert is double‑sided with multiple usable edges; the integrated double‑sided chipbreaker provides controlled chip formation across a range of feeds and depths, aiding evacuation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH8015, ISO conformity and a compact triangular form for dependable turning of heat-resistant alloys; improved wear resistance and edge stability support consistent part quality and predictable tool life. Order the TNMG160408 AH8015 inserts via Metav Werkzeuge or consult our technical advisors for holder compatibility and supply. TNMG160408 AH8015 — Turning insert (PVD-coated carbide) by Tungaloy The TNMG160408 AH8015 is an ISO-standard triangular indexable turning insert designed for external and internal turning operations, offering a balance between wear resistance and cutting-edge stability for heat-resistant alloys. TNMG160408 ISO triangular turning insert PVD-coated carbide grade AH8015 Designed for heat-resistant alloys Double-sided chipbreaker, cylindrical hole Consistent cutting performance for heat-resistant alloys The PVD-coated AH8015 grade is tailored to provide a balance between wear resistance and edge stability, making the insert particularly suited to machining heat-resistant alloys where thermal loads and abrasive wear are common. The PVD-coated carbide substrate reduces flank wear and helps maintain a predictable cutting edge under elevated temperatures, which translates into consistent surface finish and extended tool life. For production environments seeking repeatable component quality, this performance profile reduces unscheduled tool changes and supports stable cycle times. ISO compatibility and secure clamping to reduce downtime Built to ISO standards, the TNMG form ensures straightforward matching with ISO-designated holders; compatibility is governed by shape, clearance angle, tolerance class, attachment method, size and thickness. The insert features a cylindrical central hole and standard mounting geometry so that the correct outer holder or boring bar and the appropriate shim and clamping set can be selected without trial-and-error. The plate thickness of 4.76 mm and the triangular layout simplify inventory management and replacement procedures, while precise tolerances contribute to secure clamping and repeatable tool positioning in the toolholder. Efficient chip control and economical tooling strategy A double-sided chipbreaker provides reliable chip formation across both cutting edges, and the 0.8 mm corner radius gives a good compromise between edge strength and dimensional accuracy at the cutting edge. The insert’s double-sided design doubles the available cutting edges per index, lowering the cost per edge and improving overall economy in high-volume machining. Selecting the right chipbreaker and grade for the workpiece material and cutting conditions supports efficient chip evacuation and helps to avoid built-up edge or thermal distortion, which in turn reduces rework and scrap rates. For compatibility checks, technical advice or to secure supply of TNMG160408 AH8015 turning inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930; our consultants will advise on holder pairing and availability Technical data Article number: 6741694 Manufacturer SKU: TUN6741694 Supplier SKU: 6741694-Tungaloy Model designation: TNMG160408 AH8015 Core specifications Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Features and materials Material: carbide Coating: PVD Plate shape: triangular Chipbreaker: double-sided Hole style: cylindrical hole Typical application: turning Series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The TNMG160408 AH8015 insert from Tungaloy is designed primarily for heat-resistant alloys and general turning where a balance of wear resistance and edge stability is required. How is the insert fixed in the holder? The insert uses a cylindrical central hole for screw clamping; correct holder selection follows ISO TNMG specifications to match form, thickness and tolerance class. How many cutting edges are available per insert? With the double-sided chipbreaker and triangular shape, the TNMG160408 AH8015 offers multiple indexable edges, extending usable life before replacement is required. What advantages does the PVD coating provide? The PVD-coated carbide construction improves wear resistance and helps maintain edge integrity at elevated temperatures, supporting consistent surface quality in demanding turning operations. Is this insert compatible with standard ISO TNMG holders? Yes, the TNMG160408 AH8015 corresponds to ISO TNMG form and is compatible with holders that accept TNMG inserts of matching size, thickness and clearance angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Reliable wear resistance and cutting‑edge stability make the TNMG160408 AH8015 an efficient choice for turning heat‑resistant alloys; coupled with its ISO compatibility and double‑sided design, the insert supports predictable tool life and economical machining. Order through Metav Werkzeuge for reliable supply or consult their specialists for holder and grade selection. TNMG160408 AH8015 triangular turning insert by Tungaloy — PVD‑coated carbide, 0.8 mm corner radius A TNMG160408 AH8015 ISO triangular insert designed for external and internal turning, optimised for the general machining of heat‑resistant alloys. TNMG160408 AH8015, PVD‑coated carbide Triangular insert, 60° cutting geometry Double-sided with cylindrical locating hole 0.8 mm corner radius for versatile turning Consistent machining of heat‑resistant alloys with balanced wear and stability The AH8015 grade is a PVD‑coated carbide formulation selected for an even balance between wear resistance and cutting‑edge stability, which benefits shops machining heat‑resistant alloys. The coating improves resistance to built‑up edge and softens the impact of thermal cycling, so the insert maintains form over longer periods. Fewer unexpected edge failures translate into steadier cycle times and more consistent surface finishes, making the grade suitable for general‑purpose turning where predictable performance is required. Fast set‑up and repeatability through ISO geometry and secure locating As an ISO‑standard triangular plate with a 60° cutting geometry and a cylindrical locating hole, the insert is compatible with holders that match TNMG form, clearance angle, tolerance class and thickness. The double‑sided layout provides two usable edges per index, while the 4.76 mm plate thickness contributes to stable clamping. For production environments this means reduced changeover time and straightforward inventory management, since the insert interfaces reliably with standard external holders and boring bars. Economical production through fewer regrinds and predictable tool life The combination of the AH8015 grade and the 0.8 mm corner radius yields a compromise between edge strength and detail in the turning profile, permitting robust roughing and controlled finishing in one insert family. That balance reduces the frequency of insert changes and supports longer tool programmes, which cuts downtime and lowers per‑part tooling cost. Where surface quality and process stability matter, this insert family offers a cost‑effective approach to repeatable component production. Discuss application requirements with Metav Werkzeuge or request tailored recommendations from their consultants — Metav Werkzeuge can advise on holder compatibility and batch supply to optimise machining with the TNMG160408 AH8015 insert. Technical data Article number: 6783087 Manufacturer SKU: TUN6783087 Stock SKU: 6783087-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: TNMG160408 Grade: AH8015 Facts Cutting angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief (clearance) angle: 0° Mounting: with hole (cylindrical hole) Special features PVD‑coated carbide Double‑sided chipbreaker Triangular plate geometry Cylindrical locating hole ISO‑standard turning insert Suited to turning of heat‑resistant alloys Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TNMG160408 AH8015 insert is designed primarily for the general machining of heat‑resistant alloys; the AH8015 grade offers an even compromise between wear resistance and edge stability for such materials. Is the insert compatible with standard TNMG toolholders? Yes. The insert follows ISO TNMG geometry and uses a cylindrical locating hole, so it is compatible with holders specified for TNMG160408 geometry provided the holder matches the form, clearance angle and thickness. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving robustness during heavier cuts while still allowing acceptable surface finish for many turning operations. How many usable cutting edges does the plate offer? The triangular, double‑sided design provides multiple indexed cutting edges per plate, enabling re‑indexing to restore a fresh cutting edge and extending overall insert life. What advantages does the PVD coating provide? The PVD coating on the AH8015 grade enhances resistance to adhesion and wear at elevated temperatures, contributing to consistent cutting performance when machining demanding alloys. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
High wear resistance from the PVD-coated carbide grade and a 0.8 mm corner radius ensure stable cutting edges and consistent component quality in turning operations; the ISO format and standard dimensions simplify tool sourcing and reduce set-up time. Order the insert directly via Metav Werkzeuge or request consultation for holder compatibility and process recommendations. TNMG 160408 AH8015 — Tungaloy indexable turning insert, PVD-coated, 0.8 mm radius The TNMG160408 AH8015 is an ISO-format triangular indexable insert for turning, designed for productive machining of heat‑resistant alloys and general external and internal turning tasks. Triangular ISO insert, ISO 160408 PVD-coated carbide for heat-resistant alloys 0.8 mm corner radius for edge stability Double-sided with cylindrical hole Reliable cutting performance with PVD-coated carbide The combination of PVD-coated carbide and the AH8015 grade offers a balanced mix of wear resistance and cutting-edge stability, making it suitable for a wide range of heat‑resistant alloys. The coating reduces flank wear at elevated temperatures and supports longer tool life under interrupted cuts. This results in fewer insert changes and more consistent part quality, which improves cycle-time predictability and lowers per‑component tooling cost in serial production. ISO format and geometry that simplify tool systems Built to ISO standard, the ISO 160408 designation ensures compatibility with a broad selection of indexable holders; important parameters for correct fit are form, clearance angle, tolerance class, fastening, size and thickness. The insert is a triangular insert with a cylindrical hole and a 0° rake angle, 4.76 mm plate thickness and a 16 mm inscribed circle, so matching the correct external holder, shim and clamp secures repeatable seating and accurate runout. Having a double‑sided insert doubles the available cutting edges per item, offering cost‑effective indexing for mixed finishing and medium roughing operations. Stable cutting and chip control for productive turning The double-sided chipbreaker geometry supports predictable chip formation and evacuation when machining tough alloys, helping to protect the cutting edge and the workpiece surface. The corner radius 0.8 mm provides a robust tip for stable cuts and modest profile work, while the PVD layer keeps the edge integrity under thermal load. Together these features reduce downtime caused by edge failure and contribute to a reliable surface finish, making the insert a practical choice for workshops seeking dependable production results. Contact Metav Werkzeuge for availability and specific holder recommendations for this Tungaloy insert; technical enquiries by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6775769 SKU: 6775769-Tungaloy Manufacturer SKU: TUN6775769 Manufacturer: Tungaloy Facts ISO designation: TNMG160408 Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included hole: cylindrical Included angle: 60° Rake angle: 0° Special features Material: carbide Coating: PVD Grade: AH8015 Double-sided chipbreaker Triangular plate Compatible with ISO indexable holders FAQ Which materials is this insert suited for? The AH8015 grade with PVD coating is optimised for heat‑resistant alloys and offers a broad material coverage for demanding turning tasks, as implemented in the TNMG160408 AH8015 indexable insert. Is the insert reversible or single‑use? This is a double‑sided insert, providing two usable edges per side and allowing economical indexing during serial production. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius improves edge robustness and resistance to chipping, supporting stable cuts and consistent surface finish in mixed finishing and medium roughing applications. What holder features must be checked for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and plate thickness; matching these parameters ensures correct seating and repeatable performance. Can this insert be used for internal turning? Yes, the ISO‑format geometry and chipbreaker design permit both external and internal turning when paired with a suitable boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide and a 60° geometry for stable, efficient turning of heat‑resistant alloys; the ISO compatibility and 0.8 mm corner radius further support predictable results in production. Order the TNMG160408 AH8015 insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for tailored application advice. TNMG 160408 AH8015 ISO turning insert, PVD‑coated carbide — Tungaloy The TNMG160408 AH8015 is an ISO‑standard triangular turning insert engineered for external and internal turning of heat‑resistant alloys, offering balanced wear resistance and cutting‑edge stability. ISO triangular insert TNMG 160408 AH8015 PVD-coated carbide for heat-resistant alloys Double-sided chipbreaker for versatile use 60° geometry with 0.8 mm corner radius High productivity for machining heat‑resistant alloys The triangular indexable insert delivers a predictable combination of wear resistance and edge stability, making it suitable as a primary choice for general turning of heat‑resistant alloys. The PVD‑coated carbide substrate is selected to withstand higher temperatures while maintaining cutting performance, which reduces the frequency of tool changes and supports uninterrupted production cycles. By choosing an insert conforming to ISO dimensions, process planners gain reliable comparability across holders and machine setups. Clear compatibility and mounting to speed setup Compatibility with toolholders is governed by insert form, rake/clearance angle, tolerance class, fastening method, size and thickness; the triangular format and cylindrical hole enable secure seating in many standard external holders and boring bars. The 0° clearance angle and the specified plate thickness ensure that clamping forces are taken up consistently, improving repeatability between setups. For workshop technicians, the ISO specification simplifies holder selection and reduces set‑up time. Durable cutting edge and controlled chip formation The double‑sided chipbreaker geometry is optimised for a broad range of cutting conditions and helps maintain consistent chip flow during both finishing and more aggressive cuts. The modest 0.8 mm corner radius supports improved corner strength without sacrificing surface quality, while the 60° main cutting angle suits versatile turning operations. These design choices combine to deliver longer edge life and a stable cutting process, which benefits productivity and part quality. Practical advantages for the production floor Choosing this insert contributes to a stable machining routine: ISO compliance streamlines inventory management, the PVD coating improves resistance to built‑up edge and thermal wear, and the triangular form provides multiple indexing positions per insert. The result is reduced downtime and a more predictable tool life, which supports planning for batch production and shorter lead times for repeat jobs. Contact Metav Werkzeuge today for application support, stock availability and to discuss how the Tungaloy TNMG 160408 AH8015 insert can be integrated into existing turning processes. Technical Data Article number: 6947338-Tungaloy Manufacturer SKU: TUN6947338 Manufacturer article number: 6947338 Facts Insert designation: TNMG160408 Grade / coating: AH8015, PVD‑coated carbide Plate shape: triangular Plate size: 16 Plate thickness: 4.76 mm Corner radius: 0.8 mm Main angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Special features ISO‑standard turning insert Intended use: turning of heat‑resistant alloys Balanced wear resistance and edge stability Compatibility determined by form, clearance, tolerance, fastening, size and thickness Indexable, suited for external and internal turning FAQ Is this insert suitable for machining heat‑resistant alloys? The TNMG160408 AH8015 Tungaloy insert is specified as a first choice for general machining of heat‑resistant alloys, combining a PVD‑coated carbide grade with a geometry that balances wear resistance and edge stability. What makes the chip control effective on this insert? The double‑sided chipbreaker on the TNMG160408 AH8015 promotes controlled chip formation across a range of cut depths and feeds, enhancing process stability during turning operations. Which geometrical details determine holder compatibility? Compatibility for the TNMG160408 AH8015 depends on the insert form, the clearance/rake specification, tolerance class, fastening type, plate size and thickness; these parameters match ISO‑standard holders and clamping systems. Can the insert be used for internal turning as well as external turning? Yes, the ISO triangular format and the described geometry allow the TNMG160408 AH8015 to be applied in both external and internal turning, provided a compatible boring bar or holder is used. What are the measurable specifications to check before ordering? Key measurable values for the TNMG160408 AH8015 include plate size 16, plate thickness 4.76 mm, corner radius 0.8 mm and main angle 60°; the coating is PVD on a carbide substrate as stated in the product data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide durability, a 0.8 mm corner radius for stable edge life and ISO compatibility for simple integration into existing turning tool systems. Order the TNMG160408 AH8015 Tungaloy indexable insert via Metav Werkzeuge or request consultancy when compatibility with holders and clamping sets needs verification. TNMG160408 AH8015 Tungaloy turning indexable insert — PVD-coated carbide, 0.8 mm corner radius The TNMG160408 AH8015 is an ISO-standard triangular turning insert, engineered for external and internal turning of heat-resistant alloys with a balance of wear resistance and cutting-edge stability PVD-coated carbide for extended tool life ISO-standard triangle, 60° included angle 0.8 mm corner radius for stable cutting edges Double-sided chipbreaker with cylindrical hole Predictable wear life and reliable process stability The PVD-coated carbide grade AH8015 delivers a controlled compromise between wear resistance and edge stability, making the insert a dependable choice for machining heat-resistant alloys. The coating reduces flank wear under elevated temperatures while the substrate maintains fracture resistance; the result is a more predictable tool life and reduced frequency of index changes, which supports continuous production runs and higher machine uptime. This performance-oriented design contributes directly to improved cycle-time consistency and fewer unscheduled interruptions. Straightforward system integration for rapid setup As an ISO-standard triangular insert, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the indexable geometry simplifies selection for standard holders. The insert is triangular with a 60° included angle, a 16 mm edge length, 4.76 mm thickness and a 0° relief angle, plus a cylindrical hole for positive clamping. These measurable parameters enable quick verification against existing toolholders and reduce setup time on the shop floor. Clear dimension matching ensures secure fastening and consistent cutting geometry without trial-and-error fitting. Improved chip control and surface quality with a double-sided chipbreaker The double-sided chipbreaker is configured to shape and evacuate chips consistently, which lowers the risk of chip entanglement and stabilises cutting forces during turning operations. Controlled chip formation supports a more uniform surface finish and reduces the need for rework. The 0.8 mm corner radius further moderates cutting forces and promotes smoother transitions on the machined profile, particularly in light to medium turning passes where edge strength and finish are both critical. Grade selection and practical application guidance The AH8015 grade is recommended as a first choice for general machining of temperature-resistant alloys where an even balance of edge life and toughness is required. For best results, select a chipbreaker and sort that match the workpiece material, machining strategy and machine rigidity; the complete system comprises the indexable insert, a suitable external holder or boring bar, a backing/clamping set and replacement screws. Metav Werkzeuge can assist with selection to ensure the insert functions optimally within the intended machining environment. For process-stable turning of heat-resistant alloys with the Tungaloy TNMG160408 AH8015 indexable insert, contact Metav Werkzeuge for availability and tailored selection support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Name: TNMG160408 AH8015 Tungaloy indexable insert Manufacturer article number: 6918526 Manufacturer SKU: TUN6918526 SKU: 6918526-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Special features Material: PVD-coated carbide Double-sided chipbreaker Triangular insert form ISO-compatible for external and internal turning System requires matching holder, backing and clamping set FAQ What materials is this insert suitable for? The TNMG160408 AH8015 indexable insert from Tungaloy is intended primarily for heat-resistant alloys, offering a balance of wear resistance and edge stability suitable for those materials. How does the chipbreaker design affect performance? The double-sided chipbreaker on the insert shapes and evacuates chips consistently, improving surface quality and reducing the risk of chip-related interruptions during turning. Which dimensions are critical when checking compatibility with a holder? Verify the 16 mm size, 4.76 mm thickness, 60° included angle, 0.8 mm corner radius and the cylindrical hole; these parameters determine secure clamping and geometric fit for the TNMG160408 AH8015 insert. Can the insert be used for internal as well as external turning? Yes, the ISO-standard triangular form and the design of this insert allow use in both external and internal turning applications when paired with the appropriate holder or boring bar. What advantages does the AH8015 grade deliver compared with other grades? AH8015 provides a measured compromise between wear resistance and cutting-edge stability, making it a versatile option for general turning of temperature-resistant alloys where consistent tool life is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Benefit from a combination of durable PVD-coated AH8015 grade and a precise 0.8 mm corner radius for consistent cutting performance in turning operations; order the TNMG160408 AH8015 directly via Metav Werkzeuge or contact our consultants for application advice. TNMG160408 AH8015 Tungaloy — Turning insert, PVD-coated carbide, 0.8 mm radius A TNMG160408 AH8015 Tungaloy indexable insert engineered for reliable external and internal turning of heat‑resistant alloys and general turning applications. ISO-compliant triangular insert design PVD-coated carbide AH8015 grade 0.8 mm corner radius for robust edges Double-sided with cylindrical mounting hole Consistent performance for heat‑resistant alloys The combination of a PVD‑coated surface and the AH8015 cutting grade provides a balance between wear resistance and edge stability, which is particularly important when machining heat‑resistant alloys. The cemented carbide substrate ensures thermal resilience while the coating lowers adhesive wear, so the insert maintains cutting geometry longer and supports predictable tool life. This leads to fewer tool changes and more stable component quality during serial production. Built for straightforward mounting and ISO compatibility The insert follows the ISO indexable insert system with a triangular form and a 16 mm size, enabling compatibility with a wide range of standard external holders and boring bars. The cylindrical mounting hole and double‑sided design allow quick indexation and economical use of the cutting edges. Key dimensions such as 4.76 mm thickness and a 60° included angle, together with a 0° relief angle, determine fit and clamping; holders should be selected to match form, clearance angle, tolerance class, fastening and thickness for secure seating and vibration control. Productivity advantages and reliable chip control A 0.8 mm corner radius supports a robust cutting edge that withstands intermittent cuts and variances in workpiece stability, while the double‑sided chipbreaker design promotes controlled chip formation for safer turning cycles. The balanced combination of coating and substrate reduces flank wear and preserves surface finish, contributing to efficient, repeatable machining. Choosing the correct chipbreaker and grade for the specific material and operation helps to optimise cycle times and reduce downtime. For high‑performance turning of heat‑resistant alloys, request the AH8015 Tungaloy inserts from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and fast supply. Technical data Article number: 6947413 Manufacturer SKU: TUN6947413 Model series: ISO turning indexable inserts Designation: TNMG160408 AH8015 Tungaloy indexable insert Brand: Tungaloy Core dimensions Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief angle: 0° Materials & special features Material: cemented carbide Grade/coating: AH8015 (PVD‑coated) Insert shape: triangular Mounting: cylindrical hole, double‑sided Chipbreaker: double‑sided chipbreaker Application: turning, suitable for heat‑resistant alloys Compatibility: ISO insert system, requires matching holder and clamping components FAQ What materials is this insert best suited for? The TNMG160408 AH8015 insert is intended primarily for the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability suitable for such materials. Can the insert be used for both external and internal turning? Yes, the TNMG160408 AH8015 Tungaloy indexable insert is designed for both external and internal turning when paired with the appropriate ISO‑compatible holder or boring bar. How should the holder be selected for this insert? Select a holder that matches the triangular form, 60° included angle, plate size and thickness, and that provides the correct clamping method for secure seating and vibration dampening. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius gives a robust cutting edge that tolerates interrupted cuts and improves edge life, aiding consistent surface finish and reduced tool changes. Is the grade AH8015 coated and what does that mean? Yes, AH8015 is a PVD‑coated cemented carbide grade; the coating enhances wear resistance and reduces adhesion, which helps maintain cutting performance on demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD-coated carbide AH8015 grade and the 0° clearance that together deliver reliable cutting performance and consistent surface finish in demanding turning operations. The triangular, double-sided design with a 0.8 mm corner radius permits economical re-indexing and extended service life. Order the insert directly via Metav Werkzeuge or consult their application advisors for machining recommendations. TNMG 160408 AH8015 indexable insert for Turning — PVD-coated carbide (Tungaloy) TNMG160408 AH8015 Tungaloy indexable insert is an ISO-standard triangular turning insert engineered for general external and internal turning of heat-resistant alloys and similar demanding materials ISO triangular insert, 60° included angle PVD-coated carbide grade AH8015 0° clearance angle for robust cutting Double-sided insert with cylindrical hole Optimised cutting performance for heat-resistant alloys The PVD-coated carbide grade AH8015 is formulated as a balanced choice between wear resistance and cutting-edge stability, making it suitable for the general machining of heat-resistant alloys. The coating increases surface hardness and reduces adhesive wear, which translates into longer periods between indexings and more consistent part quality. This balance supports higher uptime and improved process economy without demanding highly specialised operating conditions. ISO compatibility and secure clamping for reliable results As an ISO-standard insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The triangular geometry with a 60° included angle and 0° clearance produces a robust cutting edge and predictable chip flow. The insert features a cylindrical mounting hole to match standard clamping systems; when used with a correctly matched external holder, the assembly delivers stable, repeatable performance. TNMG160408 can be indexed on both sides to maximise usable edge count. Geometry and its effect on tool life and finish The 0.8 mm corner radius provides a compromise between edge strength and surface quality: larger radii increase edge robustness and permit heavier cuts, while smaller radii favour finer surface finish. With a plate thickness of 4.76 mm and a nominal size of 16 mm, this insert yields mechanical stiffness in typical turning set-ups, reducing chatter risk and improving consistency of dimensional results. Understanding these geometric parameters helps to select feeds and depths of cut that match part tolerances and machine capability. Practical guidance on chip control and application range The insert is supplied with a double-sided chipbreaker configuration, allowing flexible chip control for a range of operations from roughing to light finishing. For external and internal turning, choose the chipbreaker and cutting data according to material family and component rigidity; a stable set-up and correct cutting fluid strategy will extend edge life and maintain surface integrity. The combination of grade and chipbreaker makes this insert a good general-purpose option when machining heat-resistant alloys and similar materials. Economical use and shop-floor advantages A double-sided triangular insert reduces tooling costs by offering multiple usable edges per index, while the robust PVD coating reduces frequency of tool changes. The ISO format simplifies stocking and replacement, and the insert integrates into the common system of insert, holder, clamping pad and securing screws. When combined with standardised holders and correct clamping, this geometry and grade support reproducible performance and lower total process cost over many production cycles. For tailored machining advice or to secure supply of the Tungaloy TNMG160408 AH8015 indexable insert, contact Metav Werkzeuge for application support and availability via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6947376 Manufacturer SKU: TUN6947376 SKU: 6947376-Tungaloy Product name: TNMG160408 AH8015 Tungaloy indexable insert Core specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Design & features Material: carbide Coating: PVD Grade: AH8015 Triangular insert, double-sided Cylindrical hole, with hole ISO indexable turning insert Application: Turning Chipbreaker: double-sided FAQ What materials is this insert best suited for? The TNMG160408 AH8015 insert is optimised for the general machining of heat-resistant alloys, offering a blend of wear resistance and edge stability suitable for those materials. How many cutting edges are available per insert? The triangular, double-sided format provides multiple usable edges; the exact count depends on indexing practice but the geometry is designed to maximise edge reuse. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius increases edge strength compared with a smaller radius and supports heavier cuts while still delivering a good surface finish in many turning operations. Is the insert compatible with standard ISO holders? Yes, the ISO designation and cylindrical hole mean the insert is compatible with ISO-standard toolholders that match form, clearance angle, tolerance and fixing type. What advantages does the PVD coating offer? The PVD coating enhances surface hardness and reduces adhesive wear, helping to extend edge life and improve consistency under intermittent or continuous cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 grade and a 60° triangular geometry for consistent performance in turning heat-resistant alloys; the balanced wear resistance and edge stability support productive machining and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG160408 AH8015 Tungaloy Turning Insert — PVD-coated cemented carbide, 60° A TNMG160408 AH8015 indexable turning insert for versatile external and internal turning of heat-resistant alloys, designed to fit ISO-standard holders and provide reliable cutting performance. PVD-coated carbide grade AH8015 ISO TNMG triangular 60° insert 0.8 mm nose radius for precise contours Double-sided chipbreaker, with cylindrical hole Consistent cutting for heat-resistant alloys The PVD-coated AH8015 grade combines a fine cemented carbide substrate with a wear-resistant surface treatment to deliver balanced wear resistance and reliable edge stability during the machining of heat-resistant alloys. This composition reduces flank wear and maintains cutting geometry over longer intervals, which translates into fewer tool changes and more predictable cycle times. The result is dependable productivity when working on common high-temperature alloys in both roughing and light finishing operations. Geometry and clamping ensure repeatable accuracy The triangular ISO-standard form with a 60° cutting angle and a 0° clearance specification allows secure seating in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s 0.8 mm nose radius supports accurate contour generation without excessive tool overhang, while the cylindrical hole and robust plate thickness provide stable clamping and repeatable positioning for batch production. Clear geometry specifications simplify toolholder selection and reduce setup variation. Efficient chip control and surface quality Equipped with a double-sided chipbreaker, the insert manages chip formation in a range of cutting conditions and helps avoid tangling or surface damage, particularly when machining long or ductile swarf. The moderate nose radius promotes a good surface finish without sacrificing material removal rate, enabling a single insert to cover both medium-feed semi-finishing and finishing steps when parameters are optimised. Selecting the correct chipbreaker and adjusting feeds ensure consistent part quality and lower rework rates. System approach for workshop reliability This insert functions as part of a complete system: an ISO turning insert combined with a suitable external holder or boring bar, support pad or clamp set and spare fastening screws. Keeping matched components on hand reduces downtime and simplifies inventory management. The insert’s PVD surface and carbide core are tuned for general-purpose applications on heat-resistant alloys, offering a practical balance between tool life and edge toughness for everyday production environments. For reliable turning performance with Tungaloy quality, contact Metav Werkzeuge for availability and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical fitment and procurement. Technical data Article number: 6947406 Manufacturer SKU: TUN6947406 SKU: 6947406-Tungaloy Facts Grade: AH8015 Cutting material: PVD-coated cemented carbide Shape: Triangular (TNMG) Size: 16 mm Thickness: 4.76 mm Insert designation: TNMG160408 Nose radius: 0.8 mm Included hole: With hole, cylindrical Wedge/angle: 60° Clearance angle: 0° Special features Double-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning Compatible with ISO holders when form and tolerance match First-choice grade for heat-resistant alloys FAQ What materials is this insert designed for? The TNMG160408 AH8015 Tungaloy turning insert is intended primarily for the general machining of heat-resistant alloys, offering a balance of wear resistance and edge stability for those materials. How does the PVD coating affect performance? The PVD-coated surface on the AH8015 grade improves wear resistance and reduces built-up edge under elevated temperatures, helping the TNMG160408 insert maintain cutting geometry for longer in demanding turning operations. Which holder features must match the insert? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; using an ISO-compliant holder that accepts TNMG plates ensures secure clamping and repeatability. Can this insert be used for both external and internal turning? Yes, the triangular design and chipbreaker make the indexable insert suitable for both external and internal turning, provided the correct holder or boring bar and process parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH8015 grade that balances wear resistance and edge stability, together with the ISO TNMG geometry and a 0.8 mm nose radius for precise, repeatable turning results; order via Metav Werkzeuge or consult our technical advisors for application guidance. TNMG160408 AH8015 TNMG indexable insert for turning — Tungaloy The TNMG160408 AH8015 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a robust combination of PVD-coated carbide and a precision 0.8 mm corner radius for machining heat‑resistant alloys. TNMG 160408 ISO geometry PVD-coated carbide AH8015 0.8 mm nose radius for precision Double-sided chipbreaker with hole Precision and cutting performance for heat‑resistant alloys The combination of PVD-coated carbide and the AH8015 grade provides a measured balance between wear resistance and cutting-edge stability, which is particularly advantageous when machining heat‑resistant alloys. The moderate coating hardness reduces adhesion and flank wear at elevated temperatures, extending tool life and improving process consistency. A 0.8 mm corner radius offers an optimal trade-off between component surface finish and edge strength, enabling controlled chip formation and reducing the risk of edge chipping during interrupted cuts. Reliable integration into ISO tool systems for predictable results Manufactured to ISO dimensions, the insert is compatible with holders when form, clearance angle, tolerance class, attachment, size and thickness match the toolholder specification. The insert’s triangular shape and the presence of a cylindrical hole facilitate secure clamping in standard TNMG pockets; the system typically comprises the insert, a matching outer holder or boring bar, a support shim or clamp set, and replacement screws. This modular setup enables fast index changes, repeatable positioning and reduced setup variability, which in turn increases uptime and supports stable manufacturing processes. Practical benefits on the shop floor and recommended applications The double‑sided chipbreaker design permits economical index changes and efficient chip control for both external and internal turning operations. With the AH8015 grade tuned for tough alloys, the insert is a sensible choice for general turning where a compromise between tool life and edge robustness is required. The balanced characteristics support consistent surface quality and machining productivity, while the ISO TNMG format simplifies tool inventory management and holder compatibility for workshops seeking reliable, repeatable results. Contact Metav Werkzeuge today for application-specific advice on the Tungaloy TNMG160408 AH8015 insert and assistance with holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741690 Manufacturer SKU: TUN6741690 SKU: 6741690-Tungaloy Model series: ISO turning indexable inserts Designation: TNMG160408 AH8015 Material: carbide Facts Corner radius: 0.8 mm Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Insert angle: 60° Special features PVD-coated carbide, grade AH8015 Triangular insert, double-sided chipbreaker With cylindrical hole for secure clamping Intended application: turning (external and internal) Compatibility depends on holder form, attachment and tolerance FAQ What materials is this insert suitable for? The TNMG160408 AH8015 insert is designed as a first choice for general machining of heat‑resistant alloys, offering a balance between wear resistance and edge stability for demanding materials. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius on the TNMG160408 AH8015 increases edge strength for interrupted cuts while still allowing a good surface finish, making it suitable for a wide range of turning operations. Can the insert be used in standard ISO TNMG holders? Yes, the TNMG160408 AH8015 follows ISO dimensions and will fit standard TNMG pockets provided the holder’s form, clearance angle, tolerance class, size and thickness match the insert specification. What is the benefit of the PVD coating on this grade? The PVD coating on the AH8015 grade reduces adhesion and flank wear at higher cutting temperatures, improving tool life and maintaining cutting‑edge integrity during prolonged turning cycles. Is the chip control suitable for finishing cuts? The double‑sided chipbreaker on this insert supports controlled chip formation and can be used in finishing passes where stable chip flow and consistent surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AH905 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide in the AH905 grade, a 60° TNMG geometry and a 0° rake that deliver stable, repeatable turning performance; the double-sided chipbreaker and 0.8 mm corner radius increase versatility for external and internal turning. Order the TNMG160408 insert via Metav Werkzeuge or request application support from our consultants for precise selection. TNMG160408 AH905 TNMG ISO 160408 turning insert for Turning — PVD-coated carbide, 60° | Tungaloy The TNMG160408 AH905 turning insert is an ISO-standard triangular indexable insert for external and internal turning, equipped with a 0° rake and a double-sided chipbreaker for reliable chip control. TNMG geometry 60° triangular insert PVD-coated carbide AH905 for wear resistance Double-sided chipbreaker, reversible insert 0.8 mm corner radius for versatile profiles Stable cutting performance for continuous production The PVD-coated carbide grade AH905 combines wear resistance with a chipbreak-friendly edge, designed to sustain a sharp cutting face under varying process conditions. This hardness and coating chemistry support process stability, reducing the frequency of insert changes and helping maintain component tolerances over long runs. For manufacturers seeking predictable tool life and fewer interruptions, the coated carbide chemistry delivers improved edge retention and resistance to micro-chipping compared with uncoated grades, contributing to more consistent cycle times and part quality. Precise geometry that speeds set-up and reduces rework The triangular 60° geometry and 0° rake enable flexible engagement angles for both facing and longitudinal turning operations. With a corner radius of 0.8 mm and a plate thickness of 4.76 mm, the design balances edge strength with the ability to produce fillets and profiles without excessive tool marks. The insert is double-sided and indexable, meaning each seat offers multiple usable edges before disposal; this reversible format lowers tooling costs per cutting edge and simplifies inventory management. Compatibility with ISO holders is governed by form, relief angle, tolerance class, clamping and thickness, allowing easy integration into standard turning tool systems. System compatibility and application-focused selection Integration is straightforward: the ISO insert forms the core of a system that includes an appropriate external holder or boring bar, a locating pad or clamping kit, and replacement screws as required. The plate’s cylindrical locating hole supports positive indexing and secure clamping. Selection of the correct chipbreaker and grade should match the workpiece material and machining stability to extract maximum performance from the geometry and coating. For operations that require a sharp cutting edge alongside secure, repeatable results, the AH905 choice offers a robust starting point and can be tailored through chipbreaker and holder choice to the specific production task. Contact Metav Werkzeuge for tailored application advice and to order Tungaloy TNMG160408 AH905 turning inserts; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6859464-Tungaloy Manufacturer article number: 6859464 Manufacturer SKU: TUN6859464 Model series: ISO turning inserts Application: Turning Facts ISO designation: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Rake angle: 0° Special features Material: carbide Coating/type: PVD-coated carbide Grade: AH905 Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Rake: 0° Suitable for external and internal turning FAQ What operations is this insert designed for? The TNMG160408 AH905 Tungaloy turning insert is intended for external and internal turning operations under ISO conventions, suitable for a wide range of general turning tasks. Is the insert indexable and reversible? Yes — the triangular plate with a double-sided chipbreaker is indexable and reversible, providing multiple usable cutting edges to extend tool life. What does the AH905 grade offer in practice? The AH905 PVD-coated carbide grade provides a balance of wear resistance and edge security, suitable where a sharp cutting edge and consistent process stability are required. How is holder compatibility determined? Compatibility with holders is dictated by form, relief (clearance) angle, tolerance class, clamping method, size and thickness, so the insert integrates with standard ISO turning holders when these parameters match. Which key dimensions should be checked before ordering? Check the ISO designation 160408, insert size 16 mm, thickness 4.76 mm, corner radius 0.8 mm and the 60° included angle to ensure fit with existing tool holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, ISO compatibility and a compact triangular form to achieve consistent surface quality and reduced tool change frequency. Order the insert through Metav Werkzeuge or consult their specialists for holder and clamping recommendations. TNMG160408 AT9530 Tungaloy indexable insert — Coated cermet for finishing, ISO 160408 The TNMG160408 AT9530 is an ISO triangular indexable insert for turning, optimised for finishing and light machining of steel with a focus on surface quality and uniform wear. ISO triangular insert TNMG form Coated cermet grade AT9530 0.8 mm corner radius for fine finish Double-sided chipbreaker, with cylindrical hole Consistent surface quality and prolonged edge life The combination of a coated cermet cutting grade and a precisely defined corner radius delivers measurable improvements in surface finish and edge stability. The AT9530 grade is developed for finishing and light cuts in steel, promoting uniform wear across the cutting edge and reducing the need for frequent edge changes. As a result, machining cycles become more predictable and set-up intervals are minimised, contributing directly to higher process efficiency and lower per-part production effort. The triangular form supports multiple indexed edges, extending effective tool life without compromising part quality. Flawless integration into ISO-standard toolholders Designed to conform to the ISO indexable insert system, compatibility depends on form, relief angle, tolerance class, fastening and thickness. The insert features a 0° relief angle, an included angle of 60°, and a thickness of 4.76 mm, which together influence clamping stability and cutting geometry. The central cylindrical hole and the standard TNMG geometry allow straightforward clamping with the appropriate outside holder or boring bar; correct selection of the holder and underlay/clamping set ensures repeatable positioning and safe chip evacuation. Clear identification of these parameters avoids guesswork during tool assembly and supports consistent cutting results. Productivity gains from a capable chipformer and grade The double-sided chipbreaker provides controlled chip formation in light finishing operations, reducing the risk of irregular chip flow and contributing to stable cutting conditions. Because the grade emphasises surface quality, in many applications fewer finishing passes are required, which reduces cycle time and improves throughput. The insert’s multiple usable edges and reliable wear characteristics translate into a positive cost-benefit over production runs, making the component particularly suitable where surface integrity and process repeatability are priorities. Well-suited for finishing steel and simple to specify Intended primarily for turning of steel in finishing and light machining operations, the indexable insert offers practical advantages where dimensional accuracy and surface appearance matter. The 0.8 mm corner radius balances edge strength with the ability to produce fine profiles, while the triangular shape yields economical edge utilisation. When selecting this insert, match the AT9530 chipformer and the holder rigidity to the part geometry and clamping setup to exploit the grade’s strengths. Technical data such as the designation and size simplify procurement and ensure the correct replacement inserts are ordered for consistent results. For reliable finishing performance with Tungaloy’s AT9530 grade, contact Metav Werkzeuge for tailored recommendations on holder compatibility, clamping sets and supply options; their consultants will advise on the correct TNMG160408 variant and delivery arrangements Technical data Article number: 6773707 Manufacturer SKU: TUN6773707 SKU: 6773707-Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions ISO designation: 160408 Insert designation: TNMG160408 Size: 16 Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Features & suitability Material / body: cemented carbide Cutting material type: coated cermet (AT9530) Chipbreaker: double-sided Hole: with hole, cylindrical hole Typical application: turning; finishing and light machining of steel FAQ Which applications is this insert best suited for? The TNMG160408 AT9530 indexable insert by Tungaloy is intended for turning, specifically finishing and light machining of steel where surface quality and uniform wear are priorities. How does the AT9530 grade influence performance? The AT9530 coated cermet grade provides enhanced surface finish and consistent wear behaviour, helping the TNMG160408 insert maintain edge stability during finishing cuts. What are the key dimensions to check for holder compatibility? Confirm the ISO designation (160408), thickness (4.76 mm), size (16), relief angle (0°) and central cylindrical hole to ensure the insert fits the chosen outside holder or boring bar. Can the insert be indexed to use multiple edges? Yes, the triangular TNMG form with a double-sided chipbreaker allows indexing to additional edges, extending the service life of the insert before replacement. Which chip control behaviour can be expected? The double-sided chipbreaker on this Tungaloy insert promotes controlled chip formation in finishing operations, supporting stable cutting and easier chip disposal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AT9530 Wendeplatten - Tungaloy
Take advantage of consistent surface quality, durable coated cermet performance and easy indexing for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. TNMG 160408 AT9530 Turn insert TNMG160408 for precision turning — Tungaloy The TNMG160408 AT9530 insert is an ISO-indexable triangular turning insert engineered for fine and light finishing of steel components, prioritising surface integrity and uniform tool wear. ISO-indexed triangular insert TNMG160408 Coated cermet grade AT9530 for fine finishing Double-sided chipbreaker for extended use 0.8 mm corner radius for superior surface quality High-precision finishing for steel components The coated cermet grade AT9530 is designed specifically for fine and light machining of steel, delivering a combination of refined surface results and consistent wear over repeated indexings. Cermet is a ceramic‑metal composite that offers a harder cutting edge than conventional carbides while maintaining toughness, which explains the improved finish when compared with standard grades. The 0.8 mm radius and 60° geometry support low‑vibration cutting, reducing the need for secondary finishing and ensuring predictable part quality even in medium‑ to high‑volume production. Reliable indexable design and secure clamping As an ISO-indexed insert, the TNMG160408 fits standard holders when form, clearance angle, tolerance class, fastening, size and thickness are matched. The triangular shape with a double-sided chipbreaker provides multiple indexable edges, improving tool life and lowering downtime for replacements. Compatibility is determined by mechanical fit rather than brand alone, so selecting a matching holder and correct clamping kit ensures process stability and repeatable positioning for batch production. Improve throughput while maintaining surface standards Selecting a finishing grade such as AT9530 helps to balance productivity and component quality: fewer tool changes, steadier cutting forces and reduced scrap rates contribute to a favourable cost profile in production runs. The insert’s coated cermet composition supports smooth chip flow during finishing operations, while the double-sided design extends usable life. For manufacturing environments focused on reliable part finish and predictable tool behaviour, this insert offers a practical route to higher overall equipment effectiveness. For precision turning with the Tungaloy AT9530 grade, contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6773705 SKU: 6773705-Tungaloy Manufacturer SKU: TUN6773705 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160408 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 60° Special features Coated cermet cutting material Grade/coating: AT9530 Carbide material (Hartmetall) Double-sided chipbreaker Triangular insert form With cylindrical hole Application: Turning ISO-indexable design FAQ What materials is this insert suited for? The TNMG160408 AT9530 Tungaloy insert is intended primarily for steel and is optimised for finishing and light turning operations where surface quality and even wear are priorities. How is compatibility with tool holders determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the TNMG160408 designation identifies the ISO geometry to match corresponding holders. Does the insert offer multiple indexable edges? Yes, the triangular, double-sided design of this insert provides several indexable edges, allowing reorientation to fresh cutting edges and extending service intervals. What are the key dimensions to check before ordering? Essential dimensions include insert size 16 mm, thickness 4.76 mm and corner radius 0.8 mm; these ensure correct seating and cutting conditions for the TNMG160408 AT9530 Tungaloy insert. Is this grade suitable for achieving high surface finish? The AT9530 coated cermet grade is specifically developed for superior surface quality in finishing applications, offering uniform wear and stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) and a 0.8 mm corner radius for consistently high surface quality and predictable tool life; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application matching. TNMG 160408 AT9530 — Indexable turning insert for finishing by Tungaloy The TNMG160408 AT9530 is an ISO indexable insert intended for finishing and light turning of steel, optimised to deliver improved surface quality and steady wear behaviour. Coated cermet grade AT9530 for fine finishing ISO TNMG160408 triangular insert, 60° cutting angle Double-sided chipbreaker with cylindrical hole High-precision finishing from a cermet grade designed for surface quality The insert’s coated cermet composition, identified as AT9530, is engineered specifically for finishing and light machining of steel. Cermet combines ceramic hardness with metallic toughness, which reduces built-up edge formation and supports a consistent surface finish during finishing passes. The controlled wear characteristics of the grade mean more predictable change intervals and less variation in part quality over a production run, aiding process stability and repeatable component finish. Easy integration into ISO TNMG tool systems for reliable setup As an ISO 160408 format, the triangular insert fits holders and tool posts that match the TNMG form and size; compatibility is determined by holder shape, clearance angle, tolerance class, fastening method, size and thickness. The standardised geometry simplifies tool procurement and replacement logistics. Specified dimensions (16 mm inscribed circle, 4.76 mm thickness) and the 0° clearance angle make the part straightforward to verify against existing fixtures and reduce setup uncertainty in small-batch and serial operations. Geometry and chip control that reduce downtime and improve part finish The insert features a 0.8 mm corner radius and a 60° triangle form, balancing edge strength with the ability to produce fine surface textures in finishing cuts. The double-sided chipbreaker enables two usable cutting edges per pocket, and the cylindrical hole secures consistent clamping and repeatable seating. Together these design elements lower indexing frequency and help maintain consistent cutting conditions, which benefits throughput and lowers total process cost per part. Recommended use cases and selection guidance for turning operations This grade and geometry are best applied to final passes and light stock removal where surface quality and dimensional consistency are priorities. Select the chipbreaker and grade to match the workpiece material and machine/tooling stiffness; for less rigid setups, favour stable clamping and conservative feeds to exploit the AT9530’s wear characteristics. For internal and external turning where a fine finish is required, this insert offers a cost-effective way to achieve consistent results with minimal process variation. Contact Metav Werkzeuge today to secure genuine Tungaloy AT9530 indexable turning inserts or to discuss the ideal insert configuration for the application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773703 SKU: 6773703-Tungaloy Manufacturer SKU: TUN6773703 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° ISO code: 160408 Special features Coating/grade: AT9530 (coated cermet) Material: carbide Plate shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What applications are best for this insert? The TNMG160408 AT9530 indexable turning insert is intended for finishing and light turning of steel, where a high-quality surface finish and uniform wear are required. Which holders are compatible with ISO 160408 inserts? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; match the holder to the ISO TNMG form and the insert’s 4.76 mm thickness. How does the AT9530 grade affect tool life? The AT9530 coated cermet is formulated for steady wear and improved surface finish, so it tends to produce predictable wear patterns and consistent component quality over extended runs. How many usable edges are available per insert? With a double-sided chipbreaker and triangular geometry, the insert offers multiple indexing positions; exact edge count depends on the holder and mounting method. What does the 0.8 mm corner radius influence in turning? A 0.8 mm corner radius balances corner strength and finish capability, helping to achieve smooth surfaces while maintaining an adequately robust cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of precise finishing, consistent tool life and straightforward holder compatibility; the coated AT9530 grade delivers even wear and excellent surface quality while the ISO format ensures predictable replacement routines. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160408 AT9530 turning insert — coated cermet, 0.8 mm radius, Tungaloy The TNMG160408 AT9530 is a coated cermet indexable insert designed for precision and light turning of steel components, prioritising surface finish and uniform wear. TNMG160408: ISO triangular shape 60° Coated cermet grade AT9530 for surface finish 0.8 mm corner radius for fine finishing Double-sided chipbreaker, with cylindrical hole Achieve consistent surface quality with a purpose-designed grade The combination of a coated cermet cutting material and the AT9530 grade is optimised for finishing and light machining of steel, targeting an improved and repeatable surface finish and consistent flank wear. Cermet grades are formulated to provide hardness and thermal resistance that favour close-tolerance finishing operations; this means fewer rework passes and more predictable part quality. The 0.8 mm corner radius reduces edge chipping risk while still enabling fine detail, and the ISO designation supports rapid replacement in standard holders to keep cycle times low. This paragraph focuses on efficiency and technical performance, explaining the benefits of material choice and geometry for production planners. Geometry and chip control designed for stable cutting The triangular plate form with a 60° included angle delivers a compact cutting geometry that is well suited to external and internal turning where access and rigidity matter. The insert is produced with a double-sided chipbreaker to support controlled chip formation during finishing cuts, which helps maintain consistent cutting forces and reduces surface irregularities. The cylindrical hole and a standard thickness of 4.76 mm ensure reliable clamping in compatible external holders or boring bars, while the specified 0° clearance angle contributes to dimensional accuracy when set up correctly. Clear information on geometry and chip control enables engineers to plan tool paths and fixture setups with confidence. Integration into the tool system and selection guidance Compatibility with a toolholder is determined by the insert form, clearance angle, tolerance class, mounting method, size and thickness; therefore the ISO 160408 designation simplifies matching the plate to existing clamping systems. Typical system components include the insert, a suitable external holder or boring bar, a shim or clamp set and replacement screws. Select the chipbreaker style and the AT9530 grade according to the workpiece material, the required surface specification and the machine-tool rigidity — prioritising quieter cutting and even wear for finishing applications. This guidance supports procurement and process engineering decisions by linking insert characteristics to machining outcomes. For application-specific recommendations on Tungaloy’s AT9530 coated cermet inserts and to confirm holder compatibility for the TNMG160408, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and availability. Technical data Article number: 6765006 SKU: 6765006-Tungaloy Manufacturer item number: 6765006 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Included angle: 60° ISO code: 160408 Size: 16 Special features Coating/grade: AT9530 Cutting material: coated cermet Plate form: triangular Chipbreaker: double-sided Hole style: cylindrical hole Clearance angle: 0° Application: turning Compatible system: ISO turning insert system FAQ What materials is this insert intended for? The TNMG160408 AT9530 insert is optimised for finishing and light turning of steel, with the AT9530 coating tuned to deliver uniform wear and improved surface quality. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius balances edge strength and finish capability; it reduces susceptibility to edge chipping while enabling fine surface results in light finishing passes with stable setups. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, mounting and size; the ISO 160408 designation allows matching the plate to standard triangular insert holders and boring bars. Is the chipbreaker suitable for internal turning? The double-sided chipbreaker supports efficient chip control in both external and internal turning when combined with appropriate feed and stability conditions. What is included when ordering this item? Orders comprise the TNMG160408 AT9530 indexable insert as described; holders, clamps and screws are supplied separately according to the selected tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GH330 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance, edge stability and ISO compatibility to keep turning processes productive and predictable; the GH330 grade and triangular 60° geometry ensure long tool life and repeatable results. Order the insert via Metav Werkzeuge or request compatibility advice from the sales consultants. TNMG 160408 GH330 TNMG Turning Insert – 60° triangle, 0.8 mm radius | Tungaloy A TNMG160408 GH330 ISO turning insert designed for external and internal turning where consistent edge life and reliable chip control are required. ISO triangular insert TNMG 60° geometry GH330 carbide grade for wear resistance 0.8 mm corner radius for precise profile Double-sided with cylindrical hole for secure mounting Consistent performance through a wear‑resistant grade The cutting grade GH330 is a Tungaloy-engineered carbide designed to combine wear resistance with sufficient toughness for a broad range of turning tasks. This balance reduces unexpected edge breakage and extends effective cutting time, which translates into fewer indexings and less machine downtime. The applied material science reduces flank wear under standard feed and speed ranges, supporting stable component tolerances and predictable dressing intervals for production environments. Geometry and clamping that preserve accuracy The 60° triangle insert with a 0.8 mm corner radius and 4.76 mm thickness provides a compact cutting edge suited to profile and finishing passes where dimensional control matters. The insert is double-sided, offering two usable edges per side, and is provided with a cylindrical hole to match common ISO clamping systems; compatibility with a specific holder depends on form, clearance angle, tolerance class, fixing method, size and thickness. The robust edge geometry and secure mounting together contribute to reduced vibration and improved surface finish when the correct holder and clamp set are selected. Practical advantages in daily turning operations Designed for general turning, this indexable insert performs in both external and internal operations when paired with an appropriate holder and stable setup. The ISO format enables quick replacement: only the insert is changed rather than the whole tool, which is a cost‑effective strategy for batch production and jobbing shops alike. The double-sided chipbreaker gives flexibility: the same insert supports varied chip control strategies depending on feed, depth of cut and workpiece material, reducing inventory complexity while maintaining process reliability. Selection guidance and process reliability Selection of the correct chipbreaker and grade should follow the workpiece material, machining type and fixture stability. When paired with a matched external holder, clamp set and mounting screw, the system ensures process reliability and repeatable edge performance. For less experienced staff, indexable formats simplify tool handling: inserts are easy to identify by ISO designation and the TNMG geometry is widely supported by toolholders, enabling fast setup and consistent results across shifts. Contact Metav Werkzeuge today for advice on fixture compatibility and to obtain the correct TNMG inserts for the machining task at hand via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808480 Manufacturer SKU: TUN6808480 SKU: 6808480-Tungaloy Series: ISO-Drehwendeschneidplatten Designation: TNMG160408 GH330 Material: carbide Core data Corner radius: 0.8 mm Inscribed circle / size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Special features Triangular insert form Double-sided chipbreaker Cylindrical hole for clamping Carbide grade GH330 (Tungaloy) Intended application: turning (external and internal) Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert suited for? The TNMG160408 GH330 insert, with its GH330 carbide composition, is intended for a broad range of turning tasks and offers good wear resistance on common steels and general engineering materials when the correct cutting data and holder stability are observed. How many cutting edges are available per insert? The insert is double-sided, providing multiple usable edges; this increases edge life per component and reduces the frequency of insert changes on the toolholder. Which insert geometry does TNMG denote? TNMG indicates a triangular insert with a 60° included angle; this geometry is suitable for general turning and offers a balance between strength and accessibility for profile and finishing passes. How is compatibility with the toolholder determined? Compatibility is determined by insert form, clearance angle, tolerance class, fixing method, overall size and thickness; confirm these parameters against the chosen external holder or boring bar before mounting. Is the insert supplied with coating information? The offered item is specified by the Tungaloy GH330 grade; customers requiring detailed coating or microstructure data should request the technical datasheet for the GH330 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant GH330 grade, precise 60° triangular geometry, and secure mounting for consistent turning performance. Order the inserts directly via Metav Werkzeuge or contact our consultants for application-specific recommendations. TNMG 160408 GH330 Turning insert by Tungaloy – triangular, 60° cutting angle, carbide grade GH330 A TNMG160408 GH330 Tungaloy turning insert designed for general external and internal turning applications, offering a balance of wear resistance and edge stability for reliable production results. ISO triangular insert, 60° cutting angle GH330 grade for wear resistance 0.8 mm corner radius for fine finishes Cylindrical hole for secure clamping Predictable performance from a wear-resistant grade The GH330 grade is a Tungaloy carbide formulation optimised for turning: it combines wear resistance and edge toughness to maintain cutting-edge stability over longer tool life. This performance profile reduces unexpected downtime and contributes to a more predictable process window in serial production. Where frequent insert changes are costly, the GH330 composition helps lower overall tooling expenditure by extending the effective life of each indexable edge. Clear compatibility and secure clamping for simple tool selection As an ISO-standard triangular insert, compatibility with toolholders depends on geometric fit: form, relief angle, tolerance class, fastening method, size and thickness determine correct pairing. This insert is a triangular type with a 60° included angle, a corner radius of 0.8 mm, and a thickness of 4.76 mm. The centre features a cylindrical hole for secure clamping in compatible external holders or toolposts. Understanding these dimensions ensures the insert seats correctly, transmits cutting forces safely and achieves the expected surface finish and tool life. Practical application advice for machining and chip control The insert is double-sided with a dedicated chipbreaker on both faces, allowing economical use of both cutting edges and consistent chip formation on a variety of workpieces. It is intended for turning and is suitable when a balance of surface quality and productivity is required. Select the chipbreaker style and grade based on workpiece material, cutting mode and machine stability; a robust grade like GH330 is well suited to mixed production runs where hard-wearing performance and reliable edge behaviour are priorities. For less experienced operators, matching the insert to a correctly specified holder and following recommended feed and speed guidelines from tooling documentation will reduce risk and improve first-time-right parts. Talk to Metav Werkzeuge for tailored tooling advice and availability of Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808472 Manufacturer SKU: TUN6808472 Model series: ISO turning indexable inserts Designation: TNMG160408 GH330 Tungaloy insert Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Grade: GH330 (Tungaloy) Material: carbide Shape: triangular Application: turning Compatible with ISO holders based on form, tolerance and fastening FAQ What materials is this insert suitable for? The TNMG160408 GH330 Tungaloy insert is formulated for a wide range of turning tasks; the GH330 grade provides good wear resistance and edge stability across steels and mixed material batches. How does the cylindrical hole affect mounting? A cylindrical hole ensures consistent seating and secure clamping in compatible toolholders; the TNMG160408 geometry is designed to mate with ISO-standard clamping systems for stable cutting. Can both sides of the insert be used? Yes, the insert is double-sided with chipbreakers on both faces, allowing indexing to a fresh edge and maximising the number of usable cutting edges. What does the 0° relief angle mean in practice? A 0° relief angle indicates the insert’s specified clearance geometry; combined with the 60° triangular shape and correct holder, it helps maintain cutting edge position for accurate turning results. Is the corner radius suitable for fine surface finishes? The 0.8 mm corner radius on the TNMG160408 insert balances edge strength and the ability to achieve fine surface finishes when paired with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GH330 Wendeplatten - Tungaloy
Benefit from the GH330 grade combined with a 60° triangular geometry and a 0° rake for reliable, stable turning results; the double-sided chipbreaker and carbide construction extend tool life and process security. Order or request compatibility advice directly via Metav Werkzeuge if required. TNMG 160408 GH330 — ISO turning insert (60° triangle, 0° rake) by Tungaloy A TNMG 160408 GH330 ISO turning insert designed for general external and internal turning, compatible with ISO toolholders where form, clearance angle and size match GH330 grade: wear resistance and edge stability 60° triangular insert, 0° rake angle Double-sided with cylindrical hole for secure clamp Carbide construction, 0.8 mm corner radius Stable machining through geometry and material choices The insert combines a 60° triangular shape with a precisely defined 0° rake, delivering a balanced cutting action for a wide range of turning tasks. Manufactured from cemented carbide, the component offers a compromise between hardness and toughness that supports consistent chip formation and predictable wear. The ISO-series design ensures that the insert fits standard indexable holders when form, clearance angle, tolerance class, fastening method, size and thickness correspond, so workshop planners can rely on established tooling systems for integration and repeatable set-up. Improved process reliability with chip control and clamping Equipped with a double-sided chipbreaker and a cylindrical hole for positive clamping, the insert helps maintain secure fixation and effective chip evacuation even under interrupted cuts. The 0.8 mm corner radius and a plate thickness of 4.76 mm add rigidity at the cutting edge, reducing vibration and improving surface finish. These measurable characteristics translate into fewer tool changes and a steadier cycle time in serial production; selecting the correct chipbreaker and grade for the workpiece material further enhances tool life and component quality. Practical selection and application guidance for workshop use Intended for turning operations, the insert is suitable for both external and internal applications when matched with the correct holder and cutting data. The GH330 grade supplements the insert geometry by supplying the desired mix of wear resistance, toughness and cutting-edge stability, so it is a good starting point for general-purpose turning. For optimal results, pair the insert with a holder that matches the ISO designation, confirm the clamping system accommodates the cylindrical hole and select cutting parameters based on material, rigidity and stability of the set-up to achieve the best balance of productivity and surface quality. For tool availability, holder compatibility checks or tailored cutting data, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TNMG 160408 GH330 insert and matching tooling solutions. Technical data Article number: 6808466 Manufacturer SKU: TUN6808466 SKU: 6808466-Tungaloy Model series: ISO turning indexable inserts Designation: TNMG160408 GH330 Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Rake angle: 0° Hole: with cylindrical hole Special features Grade: GH330 Material: cemented carbide Shape: triangular (60°) Chipbreaker: double-sided Intended use: turning (external and internal) Compatibility: ISO toolholder systems FAQ Which machining tasks is this insert intended for? The TNMG 160408 GH330 insert is designed for general turning tasks, suitable for both external and internal turning when mounted in the appropriate ISO toolholder. How is the insert fixed in the toolholder? Compatibility to the holder is determined by form, clearance angle, tolerance class, fastening, size and thickness; the TNMG 160408 GH330 features a cylindrical hole for secure clamping. What benefits does the GH330 grade provide? GH330 offers a balanced mix of wear resistance, toughness and cutting-edge stability, complementing the insert geometry to deliver consistent chip formation and extended tool life. Is the insert reversible and what is the corner radius? The insert is double-sided thanks to its chipbreaker design, enabling indexable use; the corner radius is 0.8 mm, providing a compromise between strength and finish quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GH330 Wendeplatten - Tungaloy
Combining GH330 wear resistance with ISO compatibility and a robust triangular geometry delivers economical, repeatable turning results; the insert reduces tool changes and supports steady cycle times. Order the genuine Tungaloy insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG160408 GH330 Tungaloy turning insert (ISO 160408, 60°) A TNMG160408 GH330 triangular indexable insert for turning operations, designed to balance wear resistance and edge stability in ISO-standard tool systems ISO 160408 geometry for standard holders GH330 grade optimised for wear resistance Double-sided chipbreaker for versatile turning Triangular insert with 0° rake and 60° angle Reliable cutting performance for productive turning The GH330 grade, combined with a cemented carbide substrate, provides a consistent mix of wear resistance and edge stability that supports longer tool life and dependable component quality. In practice, this means fewer interruptions for insert changes and a lower overall tooling cost per part. The double-sided chipbreaker helps control chip form across varying cut depths, which promotes stable cutting forces and contributes to predictable cycle times on lathes and turning centres. Accurate fit and assured compatibility with ISO toolholders Designed to the ISO 160408 designation, the triangular geometry and central hole ensure straightforward clamping in compatible toolholders. Key interface characteristics — form, relief angle, tolerance class, fastening style, size and thickness — determine fit and performance. The insert’s 0° rake and 60° included angle deliver a neutral cutting approach that suits a wide range of turning set-ups, while the cylindrical central hole supports secure, repeatable mounting in both external holders and boring bars. Process flexibility and surface quality with clear handling The combination of a well-balanced grade and a double-sided chipbreaker offers process flexibility for external and internal turning. For moderate to heavy cuts where edge stability matters, the GH330 grade maintains a robust cutting edge; for fine finishing passes the insert geometry supports consistent surface finish. Selection of an appropriate chipbreaker and cutting parameters should be aligned with workpiece stability and machining strategy to achieve the best results with minimal rework. System context, handling and application guidance Typical system composition includes the ISO indexable insert, a matching external holder or boring bar, and the necessary shim/clamp set and fastening elements for secure mounting. The triangular shape with a corner radius of 0.8 mm provides accessible indexing of multiple cutting edges, improving utilisation. When specifying tooling, consider holder rigidity and recommended cutting data for carbide grades; for tailored advice on cutting parameters or holder compatibility, consult the technical team to match the insert’s properties to the machining task. For reliable turning performance with the GH330 grade, contact Metav Werkzeuge for tailored advice and to obtain genuine Tungaloy inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808455 Manufacturer SKU: TUN6808455 SKU: 6808455-Tungaloy Model series: ISO-Drehwendeschneidplatten Key measurements Corner radius: 0.8 mm Included angle: 60° Rake angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Design & features Triangular plate form Double-sided chipbreaker Cylindrical central hole Grade: GH330 (Tungaloy) Material: cemented carbide ISO designation: TNMG160408 Application: turning FAQ What holders are compatible with this insert? Compatibility is determined by ISO geometry; the TNMG160408 GH330 insert fits holders designed for the ISO 160408 designation and matching tolerance and clamping features. How many usable cutting edges does this triangular insert provide? The triangular geometry provides multiple indexing positions; the TNMG160408 GH330 insert can be rotated to present fresh edges, improving overall tool economy. Is this insert suitable for both roughing and finishing? Yes, the combination of the GH330 grade and the double-sided chipbreaker allows flexibility for roughing and finishing operations when cutting parameters are adjusted to the workpiece and machine rigidity. What is the purpose of the double-sided chipbreaker? The double-sided chipbreaker on this indexable plate controls chip formation across different cutting depths, supporting stable cutting forces and consistent surface quality. Which material is the insert made from? The insert is manufactured from cemented carbide, a hard, wear-resistant material chosen to deliver long tool life under typical turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com