TNMG 160408 GH330 Wendeplatten - Tungaloy
Reliable wear resistance and a stable cutting edge deliver consistent turning results while simple ISO compatibility speeds integration into existing tool systems. Take advantage of the GH330 grade and triangular geometry for productive metal removal — order the TNMG160408 GH330 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 GH330 Tungaloy indexable insert (turning) — carbide, 60° The TNMG160408 GH330 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning tasks. ISO‑standard triangular insert GH330 grade for wear resistance Double‑sided chipbreaker Cylindrical hole for secure clamping Stable chip control for continuous production The combination of a double‑sided chipbreaker and the GH330 Tungaloy grade promotes predictable chip formation under varied cutting conditions, which directly reduces downtime for chip clearing and tool changes. As a carbide insert with a precise 0.8 mm corner radius, the geometry supports smooth engagement at the cut and helps maintain dimensional consistency over multiple indexings. The functional design is particularly suited to shops that prioritise throughput and repeatability, since controlled chips and a robust edge lead to fewer interruptions and more consistent component quality. Straightforward integration with ISO holders Compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; the ISO‑standard designation ensures the insert fits common external holders and boring bars when the correct seat and clamp configuration are used. The cylindrical hole offers secure clamping and repeatable alignment, which simplifies index changes and reduces setup time. This practical fitment characteristic supports faster tool swaps in multi‑tool turrets and live‑tooling applications, enabling reliable short‑term fixes and longer production runs without excessive adjustment. Material and grade advantages for general turning The GH330 grade from Tungaloy is formulated to balance wear resistance and toughness, making it suitable for a broad range of steels and mixed materials in turning operations. The carbide substrate provides the hardness to withstand abrasive wear, while the grade’s toughness supports edge stability during interrupted cuts. For manufacturers seeking a cost‑effective solution that maintains surface quality and tool life under standard cutting speeds, this specification offers measurable improvements in process stability. Geometry and practical benefits in everyday machining With an included angle of 60°, a 4.76 mm thickness and a 16 mm size, the triangular configuration gives three indexable cutting corners per side; the insert is economical to use and quick to index when a fresh edge is required. The 0° clearance angle and the defined corner radius help to control cutting forces and surface finish, particularly on external finishes and light profiling work. Where fine tolerances and consistent surface quality are required, the insert geometry produces reliable outcomes while keeping changeover and inventory handling straightforward. For application advice or to secure stock of the Tungaloy TNMG160408 GH330 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery options Technical Data Article number: 6808452 Manufacturer SKU: TUN6808452 SKU: 6808452-Tungaloy Model series: ISO‑Drehwendeschneidplatten Name: TNMG160408 GH330 Tungaloy‑Wendeplatte Application: Drehen Material: Carbide Grade: GH330 Manufacturer item number: 6808452 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° ISO code: 160408 Special features Triangular shape Cylindrical hole for clamping Double‑sided chipbreaker ISO‑standard turning insert Balanced wear resistance and toughness Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What applications is this insert intended for? The TNMG160408 GH330 insert from Tungaloy is intended for external and internal turning operations and is designed to work across a broad range of general turning tasks. Which holders are compatible with this insert? Holders compatible with the ISO‑standard TNMG geometry and the corresponding seat, clamp and tolerance class will accommodate the TNMG160408 GH330 insert; the cylindrical hole aids secure clamping and repeatable positioning. What does the GH330 grade provide? The GH330 grade offers a balance of wear resistance and toughness, improving edge stability and tool life in standard turning applications while supporting consistent surface quality. How many cutting edges are available per insert? Due to the triangular shape and double‑sided design, the insert provides multiple indexable cutting edges, enabling economical use and quick indexing when edges are worn. Is the insert suitable for interrupted cuts? The carbide substrate and the toughness of the GH330 grade provide good edge stability for interrupted cuts, making the insert appropriate for varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GT720 Wendeplatten - Tungaloy
Combine the GT720 cermet cutting grade with ISO TNMG geometry and a 0.8 mm corner radius to achieve consistent surface finish and tight dimensional control in finishing and light turning operations. Order via Metav Werkzeuge or contact our consultants for material- and process-specific recommendations. TNMG160408 GT720 indexable turning insert — Tungaloy, triangular 60° geometry A TNMG160408 GT720 indexable insert designed for finishing to light turning of steel, offering optimised surface quality and repeatable dimensional accuracy. ISO TNMG format, triangle 60° geometry GT720 cermet for finishing steel 0.8 mm corner radius for fine edges Cylindrical hole, double-sided chipbreaker Reliable surface quality for finishing operations The insert delivers a stable, high-quality cut intended for finishing to light machining of steel. The GT720 cutting grade, a coated cermet, is formulated to promote uniform wear and excellent surface finish, especially where dimensional tolerances are critical. In practical terms, this means fewer secondary operations and reduced rework, supporting improved throughput without sacrificing part quality. Material and cutting behaviour explained Made for finishing, the substrate and coating combination enhances edge integrity under moderate cutting conditions. The cermet composition provides a balance between hardness and toughness that reduces built-up edge and improves consistency across batches. When paired with the correct feed and speed settings, the indexable insert yields repeatable results and longer in-process life than many uncoated alternatives, helping to lower overall machining costs. System compatibility and secure mounting The insert follows ISO specifications for TNMG geometry, so compatibility with holders is determined by shape, clearance angle, tolerance class, attachment method, size and thickness. The triangular plate with a cylindrical hole and a 60° lead angle ensures positive seating and straightforward indexing. The 0° clearance (rake) and the double-sided chipbreaker allow two usable cutting edges per side, improving economy and simplifying inventory management. Practical handling and application tips For best results during turning, select an appropriate holder and clamping set to match the ISO form and tolerance. The 0.8 mm corner radius is well suited to produce fine profile definitions; avoid overly aggressive feeds that can overload the edge. Where surface integrity and dimensional control are priorities, the combination of GT720 and precise machine setup will reduce scrap rates and elevate first-pass yield. Contact Metav Werkzeuge today for tailored application advice or to request machining recommendations for your components — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6849174 SKU: 6849174-Tungaloy Manufacturer SKU: TUN6849174 Model series: ISO-Drehwendeschneidplatten Dimensions / core data ISO code: 160408 Insert designation: TNMG160408 Diameter/size: 16 mm Corner radius: 0.8 mm Plate thickness: 4.76 mm Lead/angle: 60° Clearance (rake) angle: 0° Design & features Material: cemented carbide Cutting grade: GT720 (cermet, coated cermet) Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (finishing to light machining of steel) FAQ What materials is this insert best suited for? The TNMG160408 GT720 insert is optimised for finishing to light machining of steel, with the GT720 cermet grade prioritising surface quality and even wear. How does the GT720 grade affect tool life and finish? GT720 provides a combination of hardness and edge strength that promotes consistent wear and excellent surface finish in finishing cuts, improving repeatability and reducing rework. Is the insert compatible with standard TNMG holders? Yes. The insert adheres to ISO TNMG form and is compatible with holders that match the insert's form, size, thickness and clamping arrangement. What cutting parameters are recommended for finishing applications? Use moderate cutting speeds and fine feeds appropriate for finishing; the 0.8 mm corner radius and cermet grade favour lower feeds for best surface integrity and dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GT9530 Wendeplatten - Tungaloy
Combine precision surface finish, robust wear resistance and reliable chip control for smoother turning cycles and fewer tool changes; order the TNMG160408 GT9530 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160408 GT9530 triangular turning insert, coated cermet, Tungaloy The TNMG160408 GT9530 is a coated triangular turning insert designed for external and internal turning, offering fine finishing performance under stable cutting conditions. Coated cermet for extended tool life Optimised double-sided chipbreaker 0.8 mm corner radius for fine surfaces ISO‑standard form with 60° included angle High-precision finishing with extended tool life The coated cermet grade GT9530 delivers a measurable increase in wear resistance compared with standard finishing grades, resulting in longer tool life and fewer interruptions in production. Cermet combines ceramic hardness with metal toughness, which reduces flank wear while maintaining a precision surface finish on steel materials. The coating stabilises the cutting edge at moderate speeds and steady feeds, so finishing passes remain consistent and rework is minimised. This benefit is particularly notable in stable setups where process reliability is paramount. Consistent chip control for improved process security Equipped with a double-sided chipbreaker, this insert enhances chip formation and evacuation, reducing the risk of built-up edge and improving repeatability across batches. Stable chip control contributes directly to higher machine uptime and reduces cycle variability, a rational advantage for series production. The triangular geometry with a 60° included angle allows multiple indexed positions, improving economy per insert and simplifying inventory management. Where surface quality and predictable tool wear matter, the optimised chip control supports a safer, more efficient turning process. ISO compatibility and practical handling to save set-up time The ISO designation ensures compatibility with standard TNMG holders; the insert's dimensions (size 16, thickness 4.76 mm) and 0.8 mm corner radius suit fine finishing and light-general turning tasks. A cylindrical hole and clear tolerance class permit secure clamping in common holders, while the substrate of carbide and the GT9530 coating are matched to typical steel applications for stable conditions. Clear system planning — matching holder form, relief angle and screw type — reduces trial-and-error during set-up and helps maintain consistent component quality on the shop floor. For application advice, availability of Tungaloy GT9530 inserts or tailored recommendations, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and secure supply Technical Data Article number: 6998102 Manufacturer SKU: TUN6998102 Model series: ISO-turning indexable inserts Numbers / Core technical data ISO designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Features / Applications Grade/coating: GT9530 Substrate: carbide Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Primary application: Turning (external and internal), finishing to light universal work on steel Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The GT9530-coated TNMG160408 insert is optimised for turning steel in stable machining conditions, offering improved surface quality and wear resistance. How does the chipbreaker influence machining? The double-sided chipbreaker promotes reliable chip formation and evacuation, which stabilises cutting forces and supports consistent part quality. Can the insert be indexed to multiple cutting edges? Yes, the triangular geometry and ISO conformity allow indexing to additional edges, increasing the number of usable cutting positions per insert. Which holder features are required for correct mounting? A matching TNMG holder with the correct form, tolerance and clamping screw is required; the cylindrical hole and standard thickness enable secure fastening in common holders. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and surface finish, making it suitable for fine finishing passes where edge robustness and visual quality are both important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GT9530 Wendeplatten - Tungaloy
Take advantage of wear resistance, precise 60° geometry and ISO compatibility to achieve consistent finishing and longer tool life in turning operations; the GT9530 coated cermet grade delivers improved surface quality under stable cutting conditions. Order the TNMG160408 GT9530 directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 GT9530 — TNMG indexable insert for turning (Tungaloy) A TNMG160408 GT9530 insert engineered for ISO‑standard turning, providing a wear‑resistant coated cermet for fine finishing and reliable performance in stable machining setups. ISO‑standard triangular insert, 60° geometry Coated cermet GT9530 for wear resistance Double‑sided with cylindrical hole for secure fixing 0.8 mm corner radius for fine finishing Stable geometry for precise finishing The 60° triangular design with a 0.8 mm corner radius and 0° clearance gives a balance between strength and the ability to produce fine surface finishes. A compact radius reduces vibration and helps keep dimensional tolerances tight during light to medium cuts. Where part accuracy and surface quality matter, this geometry supports repeatable results and reduces the need for rework, contributing to improved process reliability. Durable cutting performance with GT9530 The GT9530 grade is a coated cermet developed to extend tool life during finishing and light general‑purpose turning of steel. Cermet combines ceramic hardness with metallic toughness; the coating enhances wear resistance and maintains a stable cutting edge. The result is fewer insert changes, steadier surface finish over longer cycles and lower overall machining costs when conditions are stable and clamping is rigid. Secure mounting and system compatibility Designed to the ISO TNMG form, the insert features a cylindrical hole and double‑sided chipbreaker, enabling positive clamping in compatible holders. Compatibility with a given toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness — the insert’s 4.76 mm thickness and 16 mm size are standard dimensions for many external and internal turning holders. The cylinder hole supports reliable repeatability and simplifies index changes on multi‑insert tools. Application focus: turning steel with consistent outcomes Intended primarily for turning operations, this insert is most effective for steel when a high‑quality surface finish and extended life are required under stable cutting conditions. Select the chipbreaker and grade to match material, method and rigidity: the GT9530 excels for finishing passes and light general machining, delivering consistent results and predictable tool performance that supports throughput and part quality. Contact Metav Werkzeuge for tailored advice and secure the Tungaloy TNMG160408 GT9530 insert by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998100 Manufacturer SKU: TUN6998100 Seller SKU: 6998100-Tungaloy Facts Corner radius: 0.8 mm Geometry angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Special features Material: cemented carbide Grade: GT9530 (coated cermet) Double‑sided insert with cylindrical hole Triangular plate form, ISO TNMG Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TNMG160408 GT9530 is optimised for steel machining, offering a finishing‑oriented performance that helps achieve improved surface quality under stable conditions. Is the insert reversible and how is it secured? Yes, the insert is double‑sided and secured via a cylindrical hole; the design allows indexing to the unused cutting edge and stable clamping in compatible holders. Which toolholders fit this TNMG insert? Compatibility follows ISO TNMG standards and is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and plate thickness. What advantages does the GT9530 cermet grade provide? GT9530 is a coated cermet grade that enhances wear resistance and edge stability for finishing and light universal turning, resulting in longer life and consistent surface finish. Can this insert be used for roughing operations? This grade is intended mainly for finishing and light general‑purpose cuts; for heavy roughing applications a tougher, coarse‑grain grade is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet durability and ISO-compliant geometry for consistent finishing results; the triangular design with a 0.8 mm corner radius delivers reliable surface quality while the double-sided chipbreaker improves economy. Order the TNMG160408 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. TNMG160408 GT9530 Tungaloy turning insert — coated cermet, 60° triangular geometry A TNMG160408 GT9530 insert engineered for finishing to light general-purpose turning of steel where improved surface finish and extended tool life are required under stable machining conditions. Coated cermet grade GT9530 for long life ISO TNMG 160408 standard form 60° triangular insert with 0.8 mm radius Double-sided chipbreaker, cylindrical hole Consistent finishing and extended tool life The GT9530 is a coated cermet grade developed for wear resistance and a high-quality surface finish in turning operations of steel. Cermet combines ceramic and metallic phases to resist abrasive and adhesive wear, which means longer intervals between indexings or changes. In practice, this results in fewer interruptions on production runs and more consistent component surfaces when machining under stable conditions, especially in finishing passes where dimensional accuracy and surface integrity are priorities. Geometry and edge preparation for reliable results The triangular 60° geometry and the 0.8 mm corner radius provide a balance between strength and surface definition. A larger corner radius supports higher feed rates with improved edge strength, while the specific radius chosen here helps achieve a fine surface without excessive cutting forces. The insert is double-sided, offering two usable cutting edges per side for economical tool life, and features a cylindrical hole for secure clamping. The 4.76 mm thickness contributes to rigidity in the assembly and reduces vibration risk in stable setups. Compatibility, mounting and what the numbers mean Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness. The insert has a 0° clearance angle, which influences how the insert engages the workpiece and which holder geometries are suitable. The ISO designation signals standardised dimensions and fit, simplifying replacement and inventory management. A typical system comprises the ISO insert, a matched external holder or boring bar, a shim/clamping set and spare screws — together ensuring repeatable positioning and clamping force for safe, accurate turning. Efficient application advice and selection guidance For productive turning, select the appropriate chipbreaker and grade relative to workpiece material, cutting parameters and machine stability; the GT9530 excels in stable finishing applications and light universal cuts in steel, providing stable chip formation and consistent edge life. Choosing this insert can be a cost-effective measure where surface finish and reduced downtime matter. If heavier cuts or interrupted machining are expected, consider alternate geometries or grades matched to higher mechanical loads. Contact Metav Werkzeuge today for application recommendations or to request availability of the Tungaloy TNMG160408 GT9530 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and clamping options Technical Data Article number: 6707279 Manufacturer SKU: TUN6707279 SKU: 6707279-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TNMG160408 GT9530 Tungaloy-Wendeplatte Core technical data Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 60° Plate form: triangular Hole style: cylindrical (with hole) Special features Material: cemented carbide Grade/coating: GT9530 (coated cermet) Chipbreaker: double-sided Typical application: Turning ISO designation: TNMG 160408 FAQ What materials is this insert suitable for? The TNMG160408 GT9530 is specified for steel machining and is presented as a wear‑resistant finishing to light universal grade for stable conditions. How does the double-sided chipbreaker affect productivity? A double‑sided chipbreaker supplies multiple indexed cutting edges and supports stable chip formation, increasing usable tool life and reducing tool change frequency for the TNMG160408 GT9530 insert. Which holder characteristics must match the insert? Holder compatibility depends on form, clearance angle, tolerance class, fastening method, insert size and thickness; these factors ensure correct seating and clamping of the insert. Is the GT9530 suitable for roughing operations? The GT9530 cermet grade is optimised for finishing to light general‑purpose turning; for heavier roughing cuts a different grade or geometry is recommended. How many cutting edges are available per insert? Thanks to the double‑sided, triangular design, the TNMG160408 GT9530 provides multiple indexable edges, offering economical edge utilisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 GT9530 Wendeplatten - Tungaloy
Product data conflict: substrate information is inconsistent—“material” states Hartmetall (carbide) while the grade description specifies a coated cermet; please supply corrected data to ensure clarity and accuracy in the product specifications, as this discrepancy could lead to misunderstandings or errors in application, manufacturing, or customer expectations, particularly when precise material properties are critical for performance, durability, or compatibility in specific industrial or technical contexts; resolving this issue promptly will help maintain data integrity, streamline processes, and avoid potential complications that may arise from conflicting information in the product's technical documentation or database.
TNMG 160408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, an 0.8 mm nose radius and ISO-standardised compatibility for consistent finishing results and extended tool life; order directly via Metav Werkzeuge or consult their advisors for grade selection and holder matching. TNMG 160408 GT9530 TNMG — Turning indexable insert by Tungaloy (coated cermet, 60°) The TNMG160408 GT9530 is a coated cermet indexable insert designed for finishing and light universal turning under stable conditions Coated cermet GT9530 for long life Optimised for high-quality finishing ISO-compatible TNMG form for standard holders 0.8 mm nose radius and 60° geometry High-precision finishing with wear-resistant grade The coated cermet composition and the GT9530 grade combine to offer a solution focused on surface quality and predictable wear behaviour. As an indexable insert, the component provides repeatable geometry and edge condition, which reduces setup variability and supports consistent part tolerances. The coating reduces flank wear in stable cutting regimes and helps maintain dimensional accuracy over longer tool cycles, making the insert particularly suitable for finishing passes and light turning tasks where a fine surface and controlled material removal are priorities. Efficiency gains through geometry and edge design A small 0.8 mm corner radius and the 60° geometry deliver a balance between strength and finesse: the radius supports a superior surface finish while the wedge angle ensures adequate edge support for moderate cutting forces. The double-sided chipbreaker allows economical use of each indexable corner and contributes to reliable chip control when machining steels and similar ferrous materials. The insert’s design reduces the frequency of tool changes and can shorten non-productive time in repetitive production, yielding measurable process efficiency improvements in the workshop. System compatibility and practical integration The insert follows ISO-standardised TNMG form factors and is compatible with matching external holders or boring bars; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. Typical system setup includes the ISO insert, a suitable external holder or boring bar, a clamp or shim set and replacement screws. The triangular shape and cylindrical hole secure rigid clamping and straightforward indexing, simplifying inventory and holder management across standard turning systems in production environments. Application guidance and selection advice Select the GT9530 variety when finishing steels under stable clamping and machine conditions; the coated cermet composition excels in achieving a fine surface and longer life in such use cases. For rougher cuts or unstable setups, consider grades and chipbreakers optimised for higher toughness. When choosing holders and setup parameters, match the relief angle (0°), insert thickness (4.76 mm) and inscribed circle (16 mm) to the toolholder specifications to ensure correct seating and torque distribution. Metav Werkzeuge advisors can assist with holder matching and parameter recommendations to make the most of the insert’s benefits. For precise finishing with the GT9530 grade, contact Metav Werkzeuge for expert selection and quick supply through Metav Werkzeuge Technical data Article number: 6998104 Manufacturer SKU: TUN6998104 SKU: 6998104-Tungaloy Model series: ISO-Drehwendeschneidplatten Key figures Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting geometry angle: 60° Relief angle: 0° Features Material: coated cermet (carbide substrate) Grade: GT9530 Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert intended for? The GT9530 grade is formulated as a wear-resistant coated cermet suited for finishing and light universal turning of steels and comparable ferrous materials under stable machining conditions. Is the insert compatible with standard TNMG holders? Compatibility follows ISO norms for the TNMG form; match holder specifications for form, thickness (4.76 mm), inscribed circle (16 mm) and fastening method to ensure correct fit and clamping. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius supports improved surface finish and reduced tool marks in finishing passes while retaining sufficient edge strength for controlled light cutting tasks. Can both sides of the insert be used? The insert features a double-sided chipbreaker, allowing multiple indexing positions and economical use of available cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of a KS05F Tungaloy grade, a 60° triangular geometry and a 0.8 mm corner radius for consistent edge stability and extended tool life; order directly via Metav Werkzeuge or ask the consultants for application advice. TNMG160408 KS05F TNMG indexable turning insert, 60° triangle — Tungaloy The TNMG160408 KS05F is an ISO triangular indexable insert designed for general external and internal turning applications, offering a stable cutting edge and a compatibility profile suited to standard TNMG holders. KS05F carbide grade for high wear resistance ISO triangular TNMG 60° geometry, 0.8 mm radius Double-sided chipbreaker for secure chip control Compatible with standard TNMG 16 × 4.76 holders Consistent cutting geometry for reliable part quality The triangular 60° geometry combined with a 0.8 mm corner radius delivers a balance between robust edge strength and acceptable finishing capability. This geometry is advantageous for both roughing and medium finishing passes in turning operations, because the shape distributes cutting forces across the insert and reduces the chance of premature edge failure. The standardised ISO designation ensures predictable behaviour when the insert is paired with a matched TNMG holder and clamping set, helping to maintain repeatable component tolerances and minimise setup variation. Material and grade tuned for durability and edge stability The Tungaloy KS05F grade is a modern cemented carbide formulation selected to complement the insert geometry by offering a measured combination of wear resistance and toughness. In practice this means the cutting edge retains sharpness under mixed cutting conditions while resisting microchipping when interruptions or hard inclusions occur. For production environments aiming at consistent cycle times, the grade supports longer tool life and more predictable insert changes, which contributes directly to uptime and process stability. Controlled chip formation for safer, cleaner machining The double-sided chipbreaker on this insert is designed to produce short, manageable chips across a range of cutting depths and feeds. Effective chip control reduces the risk of entanglement around the workpiece or tool, lowers the chance of secondary damage and simplifies chip evacuation, particularly in automated or bar-fed setups. The presence of a cylindrical hole provides secure clamp-down in standard TNMG toolholders, ensuring stable contact between insert and seat and enabling reliable torque transmission during cutting. System compatibility and practical mounting considerations The insert is supplied in the ISO model family for indexable turning and must be combined with a corresponding TNMG external holder, suitable clamping set and replacement screws to form a complete system. Key dimensions to verify in the toolset are the plate size (16 mm), thickness (4.76 mm) and the 60° included angle; matching these with the holder guarantees the correct clearance, tolerance class and secure fixation. The insert’s design promotes straightforward indexing and replacement, reducing changeover time and helping maintain continuous production flow when multiple machines share the same holder standards. For increased productivity with Tungaloy’s KS05F grade and the TNMG160408 geometry, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6934809 Manufacturer SKU: TUN6934809 SKU: 6934809-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Geometry designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Rake angle: 0° Hole: with cylindrical hole Design & special features Material: cemented carbide Grade/coating: KS05F (Tungaloy) Double-sided chipbreaker Triangular plate form Intended application: Turning FAQ Is this insert suitable for both external and internal turning? Yes. The TNMG160408 KS05F insert is specified for external and internal turning operations and is suitable where a triangular indexable geometry is required. What does the KS05F grade offer compared with other grades? The KS05F grade on the TNMG160408 provides a balance of wear resistance and edge stability, giving longer, predictable performance in mixed cutting conditions. How should the insert be mounted in the toolholder? Mount the TNMG160408 in a compatible TNMG holder using the central cylindrical hole and the correct clamping set; matching the holder’s seat, clearance angle and tolerance class ensures secure fixation. Which dimensions are critical when selecting a holder? Check the insert size (16 mm), thickness (4.76 mm), corner radius (0.8 mm) and 60° geometry to confirm compatibility with the intended holder and clamping hardware. Does the chipbreaker work for a range of cutting depths? Yes. The double-sided chipbreaker on this insert is designed to manage chip formation over a range of feeds and cut depths, improving chip control in continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 KS20 Wendeplatten - Tungaloy
Taking advantage of ISO compatibility, the KS20 Tungaloy grade and a 0.8 mm nose radius delivers a balanced combination of wear resistance, edge stability and predictable finishing performance for external and internal turning. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. TNMG160408 KS20 Tungaloy turning insert — ISO triangular carbide insert, 0.8 mm radius The TNMG160408 KS20 is an ISO‑standard triangular indexable insert intended for external and internal turning, offering a tailored mix of durability and cutting‑edge stability for general turning operations ISO‑standard triangular insert for ISO holders KS20 grade — wear‑resistant, stable cutting edge 0.8 mm nose radius for precise finishing Double‑sided chipbreaker for economical use Cylindrical hole mounting, 60° included angle Secure fit and reduced set‑up time through ISO conformity Compatibility is ensured by the ISO-standard geometry: form, free angle, tolerance class, fixation, size and thickness determine fitment with the chosen holder. Specifying an ISO‑conforming triangular insert simplifies tool inventory and reduces set‑up time, as holders and spare parts from different manufacturers remain interchangeable. For production environments this leads to predictable clamping behaviour and lower machine downtime, while tolerance‑controlled seating reduces the risk of indexing errors during reassembly. Grade and substrate engineered for longer tool life The KS20 grade on a carbide substrate provides a targeted balance between wear resistance and toughness, optimised for general turning. This material combination supports stable cutting edges under varying flank and crater wear conditions, which translates to fewer interruptions for insert changes and a more consistent surface finish on serial parts. The Tungaloy‑developed grade is intended to complement the insert geometry so that abrasion and chipping tendencies are minimised during standard roughing and finishing passes. Geometry and chip control for efficient operations A 0.8 mm nose radius and a 60° included angle deliver a compromise between edge strength and fine surface generation, making the insert suitable for controlled finishing as well as light roughing. The double‑sided chipbreaker increases economic efficiency by offering two cutting edges per index, and the cylindrical hole with secure fixation ensures repeatable clamping accuracy. Together, these features improve chip formation and evacuation, reduce cutting forces in many applications and help maintain consistent cycle times on both external and internal turning operations. Practical system guidance and recommended use The insert is intended to be used as part of a system: the ISO insert, a matching external holder or boring bar, an underlay/shim and a secure clamping set with replacement screws. Choice of chipbreaker variant and grade should be matched to workpiece material, machining strategy and machine rigidity to achieve optimal results. For workshops seeking to standardise tooling, the insert offers a robust baseline for a wide range of turning tasks while allowing fine tuning of parameters for specific steels and non‑ferrous alloys. Contact Metav Werkzeuge for tailored cutting data, holder matching and availability of the KS20 Tungaloy insert; technical consultants are ready to advise by phone or email and to recommend the optimal system combination Technical data Article number: 6808478 Manufacturer SKU: TUN6808478 SKU: 6808478-Tungaloy Model designation: TNMG160408 Brand: Tungaloy Core measurements Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Clearance (free) angle: 0° Hole type: cylindrical Features and applications Material: carbide Grade: KS20 Plate shape: triangular Chipbreaker: double‑sided Mounting: with hole Intended application: turning System components: insert + holder/boring bar + shim + clamping set + screws FAQ What machining tasks suit this insert best? The TNMG160408 KS20 insert is designed for external and internal turning, offering a good compromise between wear resistance and edge stability for general turning tasks. How does the KS20 grade affect tool life? The KS20 Tungaloy grade provides enhanced wear resistance and toughness, which helps to prolong insert life and maintain a consistent surface finish under typical turning conditions. Can the insert be used in any ISO holder? The insert follows ISO geometry so compatibility is determined by holder form, free angle, tolerance class, fixation, size and thickness; matching those parameters ensures correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 KS20 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant KS20 grade, precise 60° triangular geometry and a 0.8 mm corner radius to extend tool life and maintain consistent part quality; order directly via Metav Werkzeuge or ask our consultants for selection support. TNMG160408 KS20 — TNMG turning insert (160408) by Tungaloy The TNMG160408 KS20 is an ISO‑standard triangular indexable insert designed for general turning operations, delivering a balanced mix of wear resistance and edge stability for a wide range of machining tasks. ISO‑standard TNMG geometry, 60° included angle KS20 Tungaloy carbide grade for wear resistance Double‑sided chipbreaker for flexible turning Productive performance through material and grade selection The insert is manufactured from cemented carbide and graded KS20, a Tungaloy development that prioritises a balance between wear resistance and toughness. This composition supports extended cutting life under typical turning loads and reduces unplanned indexing, which in turn improves overall process uptime. The combination of a reliable carbide matrix and an application‑oriented grade means the cutting edge retains form under moderate heat and abrasion, resulting in more consistent dimensional accuracy and fewer tool changes during serial production. Geometry and mounting that ensure consistent cuts A triangular form with a 60° included angle and a 0.8 mm corner radius delivers predictable chip formation and part finish in many turning tasks. The insert has a 4.76 mm plate thickness and is supplied with a cylindrical hole, which must match the chosen holder’s seat, clearance angle and fastening system. Compatibility is determined by the insert form, clearance angle tolerance, size and thickness; correct holder selection ensures clamping stability and repeatable positioning, reducing vibration and improving surface quality. The ISO designation provides standardised referencing for holder and tool‑post matching. Versatility and handling benefits for shops The double‑sided chipbreaker design offers multiple indexable edges per insert, optimising cost‑effectiveness in batch and production turning. The chipbreaker geometry supports controllable chip evacuation and can be paired with the KS20 grade for a balance of edge life and surface integrity. For internal or external turning applications, selecting the appropriate chipbreaker profile and adapting feeds and speeds to the workpiece material will unlock the insert’s full potential. Where process stability is critical, the robust edge and standardised geometry reduce risk of unexpected breaks and shorten setup time. For tailored advice on integrating KS20 turning inserts into existing tool systems contact Metav Werkzeuge for selection and supply — info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: 6808481 Manufacturer SKU: TUN6808481 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade: KS20 ISO designation: 160408 Key measurements Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Special features Triangular plate form With hole (cylindrical hole) Double‑sided chipbreaker Intended application: Turning FAQ What machining tasks is this insert intended for? The TNMG160408 KS20 Tungaloy turning insert is designed for turning applications and is suited to both external and internal turning when paired with a compatible holder. How many usable cutting edges does the triangular, double‑sided insert offer? With a triangular, double‑sided configuration the insert provides multiple indexable edges, allowing several repositions before replacement; this improves cost efficiency per usable edge. Which dimensions are critical when checking holder compatibility? Check the insert size (16 mm), thickness (4.76 mm), the 60° geometry and the cylindrical hole; holder form, clearance angle and fastening must match these parameters for secure clamping. What does the KS20 grade contribute to performance? KS20 is a Tungaloy carbide grade formulated to balance wear resistance and toughness, supporting stable cutting edges and longer life in general turning operations. What corner radius should be expected for edge finish and strength? The insert features a 0.8 mm corner radius, a compromise between edge strength and surface finish suitable for many finishing and medium‑cut turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS520 Wendeplatten - Tungaloy
Take advantage of a precision cermet grade and ISO-standard geometry for consistent finishing results; the triangular design with a 0.8 mm corner radius and double-sided chipbreaker ensures stable chip control and long, even wear. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult their specialists for application advice. TNMG 160408 NS520 – Turning insert by Tungaloy for finishing and light machining TNMG160408 NS520 is an ISO-format triangular indexable insert designed for external and internal turning where surface quality and dimensional accuracy are paramount ISO TNMG160408 triangular insert Cermet NS520 for fine finishing Double-sided chipbreaker for chip control Cylindrical-hole design for secure clamping Precision finishing for demanding turning operations The NS520 grade is a cermet or coated cermet formulation optimised for finishing to light machining of steel, prioritising surface finish and dimensional accuracy. This composition delivers a combination of hardness and wear resistance that reduces built-up edge and promotes uniform flank wear, so repeatable part quality is achievable across batches. Thanks to the ISO-standard geometry, integration into established tool systems is straightforward and predictable. Stable chip control and consistent clamping for productivity A double-sided chipbreaker pattern supports controlled chip formation in a variety of cutting conditions, reducing the risk of long, entangling swarf and improving process stability. The insert’s cylindrical hole and precise seat dimensions enable secure fastening in compatible holders; compatibility is determined by form, relief angle, tolerance class, clamping and plate thickness. The triangular profile also offers three indexing edges per insert, which contributes to efficient use and lower tooling cost per edge. Clear specifications to simplify tool selection and setup ISO designation and measurable parameters make selection and setup transparent: the insert matches holders rated for TNMG-style plates and key dimensions such as 16 mm inscribed circle, 4.76 mm thickness and 0° relief are fixed for reliable seating and cutting geometry. The 0.8 mm corner radius supports fine finishing passes while maintaining edge strength. These defined specifications reduce guesswork when configuring toolholders and machining programmes, helping to keep cycle times consistent. For applications requiring consistent surface quality and reliable wear behaviour, request availability of genuine Tungaloy TNMG160408 NS520 inserts or technical guidance from Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6808495 Manufacturer SKU: TUN6808495 Manufacturer item number: 6808495 Model series: ISO-Drehwendeschneidplatten Label: TNMG160408 NS520 Tungaloy-Wendeplatte Numbers / Core technical data Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features / Designs Material: cemented carbide Grade/coating: NS520 (cermet or coated cermet) Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical use: external and internal turning, finishing to light machining of steel Compatibility: ISO-standardised insert geometry for matching holders and clamping systems FAQ What materials is this insert intended for? The NS520 cermet grade is intended primarily for steel and is formulated for finishing to light machining, delivering improved surface finish and dimensional stability. Is the TNMG160408 compatible with common ISO holders? Yes, the ISO TNMG160408 format is designed for standard TNMG holders; compatibility depends on form, relief angle, tolerance class, clamping and plate thickness. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this insert promotes controlled chip formation and stable cutting conditions, which supports consistent component quality and longer usable edge life. What dimensions should be checked when selecting a holder? Check the inscribed circle (16 mm), plate thickness (4.76 mm), hole style (cylindrical) and corner radius (0.8 mm) to ensure correct seating and clamping of the insert. Is this a genuine Tungaloy product and how to reference it? The TNMG160408 NS520 listed here is a genuine Tungaloy indexable insert; reference the manufacturer item number 6808495 or SKU TUN6808495 when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of reliable surface quality, consistent tool life and simple holder compatibility for efficient finishing operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 160408 NS520 Drehen — TNMG turning insert, cermet, 0.8 mm radius — Tungaloy The TNMG160408 NS520 is a triangular, ISO‑standard turning insert designed for fine to light finishing of steel, prioritising surface quality and dimensional stability. ISO‑standard triangular insert for turning Cermet grade NS520 for fine finishing 0.8 mm corner radius for consistent edges Double‑sided geometry with cylindrical hole High-precision finishing with measurable results The insert delivers a clear focus on surface finish and repeatable part accuracy, making it suitable where tight tolerances matter. Its NS520 cutting grade is a coated cermet composition optimised for finishing passes on steel; this results in a stable wear pattern and predictable regrinding intervals. When used in a correctly specified holder, the insert’s geometry and 60° triangle form ensure reproducible engagement conditions, which supports efficient process planning and shorter cycle time variability. Longer effective tool life through optimised materials The combination of a cermet cutting edge and a carbide substrate brings the advantage of improved wear behaviour during light cuts. The grade emphasises uniform abrasion resistance, which reduces the risk of catastrophic flank wear and allows extended usage between indexings. As a result, batch processes benefit from fewer tool changes and more stable surface‑quality trends, contributing to lower machine downtime and improved overall equipment effectiveness. Smooth integration into existing turning systems Compatibility is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; this insert matches ISO holder standards and fits common external holders or boring bars. The 0° clearance angle and 4.76 mm thickness enable a secure clamp, while the cylindrical hole provides stable assembly and repeatable seating. This predictable mechanical interface simplifies inventory management and reduces set‑up time when swapping inserts between machines. Application focus and practical advantages Designed primarily for external and internal turning, the insert performs best in finishing to light machining of steel where surface appearance and dimension are priorities. The double‑sided chipbreaker supports controlled chip formation under finishing conditions, lowering the likelihood of surface damage from poor chip evacuation. Selecting the NS520 sort is particularly advantageous when consistent finish and low burr formation are required across medium‑run production. For reliable finishing and consistent process results with Tungaloy’s NS520 inserts, contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808484 Manufacturer SKU: TUN6808484 Our SKU: 6808484-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TNMG160408 NS520 Tungaloy‑Wendeplatte Facts ISO code: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical hole Special features Cutting material: cermet (NS520) Double‑sided chipbreaker Triangular insert shape ISO‑standard turning application Suitable for external and internal turning of steel FAQ What types of machining is this insert designed for? The TNMG160408 NS520 insert is specified for external and internal turning with a focus on finishing and light machining of steel. How does the NS520 grade affect tool life and finish? The NS520 cermet grade promotes uniform wear and high surface quality, extending effective tool life in finishing operations compared with uncoated grades. Is the insert compatible with standard ISO holders? Compatibility depends on form, clearance, tolerance and fastening, but the TNMG160408 follows ISO dimensions and fits commonly used external holders and boring bars that accept TNMG inserts. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and finish quality, reducing vulnerability to chipping while maintaining a fine surface texture on the workpiece. Can this insert be indexed for multiple edges? Yes, the double‑sided triangular geometry provides multiple usable cutting edges, increasing the number of indexings before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS520 Wendeplatten - Tungaloy
Benefit from the combination of the NS520 cermet grade, 0.8 mm corner radius and ISO conformity to improve surface finish and achieve consistent dimensional control. Order the insert directly via Metav Werkzeuge or contact their consultants for application-specific advice. TNMG 160408 NS520 turning insert — cermet finishing, 0° clearance (Tungaloy) The TNMG160408 NS520 turning insert is an ISO‑standard, triangular indexable plate for finishing to light turning of steel, engineered for superior surface quality and reliable dimensional stability. ISO‑standard triangular insert Cermet grade NS520 for finishing 0.8 mm corner radius for fine edges Double‑sided chipbreaker with cylindrical hole Consistent finishing and repeatable accuracy The grade NS520 is designed for finishing to light turning of steel, prioritising surface finish and dimensional accuracy. As a cermet‑based cutting material, it promotes uniform wear behaviour which reduces scatter in part tolerances and lowers rework rates. The result is more predictable process outcomes and improved throughput when fine surface integrity is required. Geometry engineered for stable turning cycles The triangular plate with a 60° included angle and 0.8 mm corner radius enables a fine cutting edge suited to finishing passes. The 0° clearance and double‑sided chipbreaker support controlled chip formation and allow two effective cutting edges per insert, optimising tool utilisation. The central cylindrical hole provides secure clamping; together these features maintain stable cutting conditions and reduce vibration during light finishing operations. System compatibility and simple selection Supplied as part of the ISO‑turning insert family, compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert thickness of 4.76 mm and nominal size 16 mm follow ISO conventions, facilitating selection of matching external holders or boring bars. Select the chipbreaker and the NS520 grade in line with workpiece stability and the required surface specification for best results. Operational advantages and application guidance Using a cermet finishing insert reduces the number of passes needed to reach target roughness, which can shorten cycle times in high‑mix production. The combination of cermet chemistry and optimised chip control supports consistent edge life under finishing conditions. For parts where tight dimensions and a high‑quality surface are priorities, this insert is a reliable option; for uncertain holder fits or atypical materials, consult application data or technical advice to confirm the correct chipbreaker and clamping arrangement. Speak to Metav Werkzeuge for tailored application guidance and specify the Tungaloy NS520 finishing insert (article TUN6808420 / SKU 6808420-Tungaloy) to ensure optimal surface finish and consistent cycle times Technical data Manufacturer article number: 6808420 SKU: 6808420-Tungaloy Manufacturer SKU: TUN6808420 Model series: ISO‑Drehwendeschneidplatten Brand: Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 0° Insert size: 16 mm Plate thickness: 4.76 mm Included hole: with hole Included angle: 60° Design and features Material: cemented carbide Cutting material type: cermet / coated cermet (NS520) Shape: triangular Chipbreaker: double‑sided Hole style: cylindrical hole Typical application: turning (finishing to light turning of steel) Compatibility note: holder compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What machining tasks is this insert best suited for? The TNMG160408 NS520 insert is intended for finishing to light turning of steel where high surface quality and dimensional stability are required. Is the NS520 grade suitable for hard machining? NS520 is a cermet grade optimised for finishing and light cutting; it is not specified for high‑hardness or heavy roughing applications. How does the chipbreaker affect performance? The double‑sided chipbreaker on this insert promotes controlled chip formation and stable cutting during finishing passes, contributing to consistent surface quality and extended edge life. Which holder features must be checked for compatibility? Confirm holder form, clearance angle, tolerance class, fastening method, insert size (16 mm) and thickness (4.76 mm) to ensure correct clamping and secure operation with this ISO‑standard turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of a purpose-built finishing insert that combines a sharp uncoated cermet grade with an ISO-standard triangular form for reliable, repeatable turning results; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMG 160408 NS9530 – Indexable turning insert for finishing, Tungaloy TNMG 160408 NS9530 is an ISO-standard triangular indexable insert optimised for finishing operations in steel, offering a sharp cutting edge and a low cutting-force geometry for continuous cuts. Triangular ISO insert TNMG 160408 Uncoated cermet grade NS9530 for finishing Sharp cutting edge and low cutting forces Double-sided chipbreaker, 0° rake, cylindrical hole Deliver consistent, high-quality surface finish in steel turning The uncoated cermet grade NS9530 combines high hardness and thermal stability to deliver a sharp cutting edge that reduces built-up edge and lowers cutting forces. This results in consistently improved surface finish on turned steel components, especially in finishing passes with small depths of cut and continuous chip flow. Compared with conventional carbide grades, a cermet finishing grade often yields longer intervals between rework and less dependence on aggressive cutting fluids, which supports process efficiency. Designed geometry and clamping for stable, repeatable machining The triangular shape with a 60° included angle and the 16 mm inscribed circle place the insert within common ISO holder families, enabling straightforward integration into standard turning systems. A thickness of 4.76 mm, a corner radius of 0.8 mm, and a cylindrical hole ensure secure clamping and repeatable indexability. The double-sided chipbreaker offers two usable cutting edges per side, increasing economy per index and allowing simple rotation for renewed geometry. Compatibility with external holders or boring bars depends on holder form, clearance angle, tolerance class, fastening and insert size. Practical process advantages and recommended applications Engineered for external and internal turning in steel, this finishing insert excels in continuous cuts and light feed, producing dimensionally accurate and smooth parts with reduced power draw and vibration. The composition and geometry make it particularly suitable for fine finishing where a low cutting force and sharp edge are required. For system assembly, pair the insert with a matching ISO external holder or boring bar, a suitable shim/clamp set and replacement screws to maintain clamping integrity and repeatable results across production batches. Contact Metav Werkzeuge for tailored machining advice and to request original Tungaloy TNMG160408 NS9530 indexable inserts — eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: 6998204 Manufacturer SKU: TUN6998204 SKU: 6998204-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160408 Brand: Tungaloy Material: cemented carbide Grade: NS9530 Coating: uncoated cermet Application: Turning Facts Inscribed circle diameter: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle (rake): 0° Special features Triangular plate form Cylindrical hole for clamping Double-sided chipbreaker Sharp finishing geometry ISO-compatible insert format Recommended for continuous cuts and small depths of cut FAQ What materials is this insert suited to? The TNMG160408 NS9530 is designed as a finishing grade for steel; the uncoated cermet NS9530 performs best in continuous turning of steel components. Can the insert be used on both external and internal turning operations? Yes, the ISO-format triangular insert is suitable for both external and internal turning when mounted in a compatible external holder or boring bar. How does the double-sided chipbreaker affect tool economy? The double-sided chipbreaker on this insert allows multiple usable edges per index, improving economy per insert and simplifying edge rotation for renewed cutting geometry. What clamping and holder considerations are important? Secure clamping relies on matching holder form, tolerance class, fastening method and insert thickness (4.76 mm); the cylindrical hole supports reliable repeatability when assembled correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 finishing grade and the low cutting forces of an uncoated cermet insert for consistently superior surface results; the compact TNMG160408 geometry and double-sided chipbreaker deliver predictable tool life in finishing operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG160408 NS9530 — TNMG turning insert, finishing grade, by Tungaloy A TNMG160408 NS9530 triangular finishing insert designed for precision external and internal turning of Stahl with a sharp cutting edge and low cutting forces Finishing cermet NS9530 for exceptional surface finish Sharp cutting edge for low cutting forces ISO triangular insert, 60° included angle Double-sided chipbreaker with cylindrical hole Achieve finer surfaces with a dedicated finishing grade The uncoated cermet grade NS9530 is developed for finishing of Stahl, offering a sharp cutting edge and low cutting forces that reduce rubbing and heat generation. For continuous cutting and small depths of cut the result is a consistently high surface finish, decreased need for grinding and fewer secondary operations. The triangular geometry and 0.8 mm corner radius support stable contact conditions while the 60° included angle provides reliable seating in ISO-compatible toolholders. Consistent process stability and longer effective life A double-sided chipbreaker and the insert’s precise dimensions make changeover predictable and minimises downtime. The insert’s 4.76 mm thickness and standard ISO form ensure compatibility with a wide range of external holders and boring bars when the holder is matched for form, relief angle, tolerance class, fastening and size. Together these factors promote process stability, repeatable part quality and efficient batch production with reduced scrap rates. Practical selection guidance for workshop use Choose the chipbreaker and NS9530 grade according to workpiece Stahl grade, machine rigidity and cutting parameters; the insert excels in finishing passes where surface quality is critical. The presence of a cylindrical hole facilitates secure clamping and rapid indexation. For many applications a small radial depth and finishing feed deliver the expected performance; when in doubt, request detailed cutting data or trial cuts to align insert geometry with setup stiffness and spindle speed. Select the Tungaloy NS9530 finishing insert for improved surface quality and stable finishing cycles — contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998200 Manufacturer SKU: TUN6998200 Our SKU: 6998200-Tungaloy Model series: ISO turning inserts Facts Insert designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Grade: NS9530, uncoated cermet Application: Turning (external and internal) Geometry: triangular insert Hole: cylindrical hole, with hole Chipbreaker: double-sided Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What is the primary application of this insert? The TNMG160408 NS9530 Tungaloy turning insert is intended for finishing operations on Stahl, suitable for both external and internal turning where a fine surface finish and low cutting forces are required. How should cutting parameters be adapted for the NS9530 grade? Use modest depths of cut and finishing feeds for the NS9530 cermet grade; the material excels in continuous cutting and small allowances, which helps to achieve the best surface quality and tool life. Is the insert compatible with standard ISO holders? Yes — the ISO designation and the TNMG form make the insert compatible with ISO toolholders when the holder matches the insert’s form, relief angle, tolerance class, fastening method, size and thickness. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker allows two indexing positions, increases usable edge life and supports predictable chip control during finishing passes, which contributes to consistent component quality. Which workpiece materials suit this insert best? This uncoated cermet grade is optimised for finishing of Stahl; selection of a different chipbreaker or grade is advised for other materials or heavy roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
The product data contains a contradiction: the field "material" lists Hartmetall (carbide) while the "Schneidstofftyp" specifies an uncoated cermet (NS9530). This inconsistency raises concerns about the accuracy of the provided information, as it is crucial for determining the correct application and performance of the product. Hartmetall, commonly known as carbide, is typically used for its hardness and wear resistance, whereas cermet materials are known for their toughness and thermal stability. To ensure proper usage and compatibility, it is essential to clarify whether the material is indeed Hartmetall or an uncoated cermet like NS9530. Please provide corrected specifications to resolve this issue promptly.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the tool is described both as cemented carbide and as an uncoated cermet; please verify the material specification to ensure accuracy, as this discrepancy could lead to confusion or errors in application, selection, or performance expectations, particularly when considering the distinct properties and uses of cemented carbide versus uncoated cermet materials, which may vary significantly in terms of hardness, wear resistance, thermal stability, and overall suitability for specific machining or cutting tasks, making it crucial to clarify whether the tool is indeed a cemented carbide product, known for its durability and toughness, or an uncoated cermet, which typically offers different advantages such as improved surface finish and resistance to built-up edge formation.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, reliable chip control and straightforward holder compatibility for consistent turning results. Order the TNMG160408 NS9530 insert directly via Metav Werkzeuge or ask the consultants for application-specific guidance. TNMG160408 NS9530 Tungaloy indexable insert for Turning, uncoated cermet finishing A TNMG160408 NS9530 insert designed for precision external and internal turning applications, offering a sharp cutting edge and reliable chip control. TNMG geometry in ISO 160408 format Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker, triangular form High-quality finishing with an uncoated cermet grade The TNMG160408 NS9530 Tungaloy insert is developed as a finishing grade intended principally for steel turning where high surface quality and low cutting forces are priorities. The uncoated cermet composition of grade NS9530 provides a sharp cutting edge that reduces built-up edge and helps maintain consistent part dimensions during continuous cuts and small depths of cut. This results in fewer secondary operations and a more predictable finish on turned components. ISO compatibility and robust mounting for predictable production The insert follows the ISO 160408 designation, making mechanical compatibility with matching holders a matter of form, clearance angle, tolerance class, fastening method, size and thickness rather than guesswork. Key dimensional characteristics such as the 0° relief angle, the 60° included angle and the 4.76 mm plate thickness ensure a stable seating in standard TNMG-capable clamping systems. The triangular form and the presence of a cylindrical locating hole deliver repeatable clamping accuracy; combined with the insert’s 0.8 mm corner radius, this supports consistent tool engagement and predictable wear progression. Controlled chips and consistent surface integrity for reduced rework A double-sided chipbreaker engineered for finishing helps to form short, manageable chips even in continuous cutting conditions, thereby improving process security and reducing the risk of chip entanglement. The pairing of NS9530 cermet and a precisely formed chip geometry produces a fine surface appearance and diminishes the likelihood of rework. For integrated system performance, the insert is intended to be used with a suitable outer holder, clamping kit and replacement screws; consult tooling data to match holder geometry and tolerance class to preserve the expected surface finish and repeatability. For application advice, consult Metav Werkzeuge to confirm holder choice and cutting parameters. For tailored application recommendations on Tungaloy finishing inserts and to ensure optimal holder compatibility, consult Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and fast delivery. Technical data Manufacturer article number: 6707289 SKU: 6707289-Tungaloy Manufacturer SKU: TUN6707289 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Radius / corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Thickness: 4.76 mm Size: 16 mm ISO designation: 160408 Special features Material: Cemented carbide Grade: NS9530 (uncoated cermet) Application: Turning (external and internal) Chipbreaker: Double-sided, for finishing Shape: Triangular Hole style: With cylindrical hole System notes: ISO insert for use with compatible holder, clamping set and replacement screws FAQ Which workpiece materials are suitable for this insert? The TNMG160408 NS9530 insert is a finishing grade formulated primarily for steels; its uncoated cermet composition and sharp cutting edge favour continuous cuts and light infeed finishing operations on steel components. Is the insert indexable and how is it used efficiently? This TNMG160408 NS9530 Tungaloy insert is indexable; its double-sided triangular design allows multiple indexings to present fresh cutting edges, extending effective tool life and maintaining process uptime. What relief angle and included angle does this insert use? The insert features a 0° relief angle and a 60° included angle, matching standard TNMG geometries for reliable seating and predictable engagement with the workpiece. How to ensure correct holder compatibility for the insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; verify these parameters against the TNMG160408 dimensions to ensure stable clamping and repeatable results. What are the practical benefits of the NS9530 grade? Grade NS9530 is an uncoated cermet designed for finishing: it provides a sharp cutting edge, low cutting forces and excellent surface finish, making it suitable where high-quality part appearance and dimensional consistency are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Benefit from the TNMG160408's combination of a sharp cermet cutting edge, low cutting forces and ISO compatibility for reliable finishing of steel parts; order via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160408 NS9530 – TNMG turning insert for finishing steel by Tungaloy A TNMG160408 NS9530 indexable insert for ISO-standard turning, engineered as a finishing grade for steel with a sharp edge and low cutting forces suitable for continuous cuts. Uncoated cermet grade NS9530 Finishing grade for steel Triangle insert, 60° cutting angle Double-sided chipbreaker, cylindrical hole High-quality finishing with low cutting forces The NS9530 uncoated cermet is formulated for finishing operations on steel, providing a sharp cutting edge that reduces cutting forces and improves surface integrity. This combination results in a high surface finish with reduced need for secondary processing, particularly when working with continuous cut conditions and smaller depths of cut. Cermet grades typically offer a fine-grained ceramic-metal matrix that maintains edge stability and promotes clean shearing; in practice this means improved component appearance and tighter dimensional tolerances during the final pass. Reliable fit and cost-efficient edge usage in ISO tool systems Compatibility within ISO tool systems is ensured by standardised form, relief angle, tolerance class, fixing method, size and thickness. The triangular plate with a 60° included angle and a 0° relief angle suits common external and internal turning holders, while the double-sided chipbreaker design delivers two usable edges per side for economical edge rotations. The insert’s cylindrical hole supports secure clamping and consistent repeatability; combined with the plate thickness of 4.76 mm and a corner radius of 0.8 mm, this geometry gives a stable seating and predictable chip flow in finishing conditions. Practical production benefits and recommended applications Designed primarily for turning, the insert is ideal for external and internal finishing of steel components where surface quality and low cutting forces are priorities. Its continuous cutting suitability reduces vibration and the likelihood of built-up edge, which helps maintain consistent finishes across batches. The system approach—indexable insert, matching holder or boring bar, clamp and replacement screws—allows fast changes and short set-up times, increasing uptime on the shop floor. By choosing a finishing-grade cermet insert like this, machining centres can expect fewer rework cycles and steadier process windows in precision turning tasks. Contact Metav Werkzeuge for availability, application guidance and holder matching; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998212-Tungaloy Manufacturer SKU: TUN6998212 Manufacturer article no.: 6998212 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Hole style: with cylindrical hole Usable edges: double-sided chipbreaker (2 usable edges per side) Special features Material: carbide (cemented carbide body) Grade/sort: NS9530 (uncoated cermet finishing grade) Typical application: turning (external and internal) Chip control: double-sided chipbreaker System setup: ISO insert requiring compatible holder, clamp and screws FAQ Which materials is this insert suitable for? The TNMG160408 NS9530 insert is a finishing-grade cermet designed primarily for machining steel; the grade is optimised for low cutting forces and excellent surface finish in continuous cutting conditions. Is the insert compatible with standard ISO holders? Yes. The TNMG160408 conforms to ISO plate geometry; compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness, so the specified dimensions (16 mm size, 4.76 mm thickness) should be matched with the holder. How many cutting edges are available per insert? This insert features a double-sided chipbreaker, providing multiple usable edges and economical indexing during production. Can the insert be used for internal turning as well as external turning? Yes. The design and chip control make it suitable for both external and internal finishing operations in turning. What are the key dimensional specifications to check before ordering? Check size 16 mm, thickness 4.76 mm, corner radius 0.8 mm, included angle 60° and relief angle 0° to ensure correct fit and performance with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, proven ISO geometry and robust chip control for reliable finishing performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. TNMG 160408 NS9530 indexable insert for turning — Tungaloy, uncoated cermet, 0.8 mm radius TNMG160408 NS9530 is an ISO‑standard triangular indexable insert intended for finishing operations in turning, offering a sharp cutting edge and consistent surface quality. ISO‑standard TNMG 160408 geometry Uncoated cermet grade NS9530 for finishing Sharp cutting edge for high surface finish Double‑sided chipbreaker with cylindrical hole High‑quality finishing with low cutting forces The TNMG160408 NS9530 insert is engineered as a finishing grade: the uncoated cermet composition and the fine edge geometry deliver low cutting forces and a superior surface finish on steel. Cermet combines ceramic hardness with metallic toughness, which reduces built‑up edge formation and supports continuous cuts with small depths of cut. The result is a repeatable machined surface and lower rework rates, which contributes to predictable cycle times in production. Reliable fit and ISO compatibility for flexible tool chains ISO standardisation ensures precise interchangeability: the 60° included angle and triangular form match holders and boring bars designed for TNMG inserts. Key dimensions such as the inscribed circle (16 mm), plate thickness 4.76 mm and the cylindrical hole define compatibility with clamping sets and replacement screws. Using standardised geometry simplifies tool inventory and allows seamless integration into existing tool posts without compromise to concentricity or clamping stability. Improved chip control and machining stability The double‑sided chipbreaker provides controlled chip formation for finishing feeds and steady metal evacuation. Stable chip control reduces vibration and protects the cutting edge, enabling consistent performance across repeated cycles. For best results, pair the insert with a rigid external holder or boring bar and select a chipbreaker and grade combination that suits the workpiece and machining strategy to maximise productivity and edge life. Process recommendations for turning applications Intended primarily for turning and fine finishing of steel, the insert performs best in continuous cuts and small feed ranges; the corner radius of 0.8 mm supports edge strength while maintaining a fine profile on the workpiece. The insert is supplied as part of an ISO insert system that typically includes a matching external holder or boring bar, a shim/clamping set and replacement screws. Matching toolholder stability and correct clamping torque will help exploit the NS9530 grade’s advantages and ensure repeatable results. Contact Metav Werkzeuge for detailed machining recommendations and to obtain original Tungaloy TNMG 160408 NS9530 inserts directly from stock Technical data Article number: 6997700 Facts Manufacturer SKU: TUN6997700 Type designation: TNMG160408 Inscribed circle/size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Uncoated cermet grade NS9530 Designed for finishing in steel Double‑sided chipbreaker Triangular plate with cylindrical hole ISO turning insert series Compatible with external holder or boring bar FAQ What materials is this insert suitable for? The TNMG160408 NS9530 is specified as a finishing grade for steel and is optimised to deliver low cutting forces and improved surface finish when machining steel. What are the key geometrical characteristics of the insert? The TNMG160408 feature set includes a 16 mm inscribed circle, a 60° included angle, a 0.8 mm corner radius and a plate thickness of 4.76 mm, with a cylindrical hole for standard clamping. Is the insert reversible or single‑use? The insert is double‑sided with a chipbreaker on both faces, allowing indexation to a fresh cutting edge when one side is worn. Which holder type is recommended for this geometry? Use an ISO‑compatible external turning holder or boring bar that accepts TNMG‑style triangular inserts with a 60° included angle and a cylindrical hole clamping system. What cutting conditions are suggested for best results? For finishing applications, employ continuous cuts with modest depths of cut and feed rates suitable for the NS9530 cermet grade; ensure a rigid tool setup to exploit the insert’s low cutting force characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
The combination of the NS9530 uncoated cermet grade, the triangular TNMG160408 geometry and a 0.8 mm corner radius delivers consistent finishing on steel while maintaining low cutting forces and extended indexable life; order the insert or request application advice via Metav Werkzeuge for a reliable tooling solution. TNMG 160408 NS9530 TNMG – Turning indexable insert by Tungaloy for precision finishing on steel, triangular ISO insert with 0.8 mm corner radius The TNMG160408 NS9530 is a triangular ISO turning insert designed for finishing operations on steel, offering a sharp cutting edge and a double-sided chipbreaker suited to continuous cuts and small depths of cut. ISO triangular insert TNMG form Uncoated cermet grade NS9530 for fine finishing 0.8 mm corner radius for refined surface finish Double-sided design with central cylindrical hole Delivering fine surface quality with an uncoated cermet grade The NS9530 designation denotes an uncoated cermet optimised for finishing applications on steel; this material offers a sharper, more wear-resistant edge than many conventional carbides, which translates into lower cutting forces and an improved part finish. In practice, the finer microstructure of the cermet grade supports continuous cutting and small depths of cut, making the insert particularly suitable where surface integrity and consistent dimensional results are critical. The combination of the grade and geometry reduces the need for secondary finishing, supporting more efficient production cycles. Stable clamping and ISO compatibility for predictable routines Compatibility with holders is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The triangular ISO form and central cylindrical hole ensure secure seating in standard external holders or boring bars when used with the appropriate shim and clamping set. The double-sided chipbreaker extends usable edges between indexing operations, enhancing uptime. For process planning, consider the system as a whole: insert, external holder or boring bar, shim/clamp set and replacement screws — each element affects stability and repeatability. Geometry tuned for finishing and controlled cutting forces A 0.8 mm corner radius and a 60° included angle give a balance between edge strength and the ability to produce fine surfaces; smaller radii reduce cutting forces and allow smaller feed rates without sacrificing finish quality. The 0° clearance angle specified for this insert design reduces interference on finishing passes, while the 16 mm inscribed circle and 4.76 mm thickness provide the mechanical support needed for steady turning. The relatively compact geometry aids in reducing vibration in slender setups, supporting tighter tolerances and consistent surface roughness values. Economic benefits through process reliability and simple setup Selecting an insert with the right chipbreaker, grade and geometry reduces scrap rates and rework. The NS9530 finishing grade is engineered to maintain a sharp cutting edge under continuous conditions, which lowers machining variability and supports predictable tool-change intervals. For production environments that prioritise throughput and surface quality, the use of a purpose-matched insert contributes directly to lower overall machining costs and fewer process interruptions. Technical staff will appreciate the straightforward selection logic: match the chipbreaker and grade to the workpiece material and the required stability of the setup. For precise finishing on steel, specify the TNMG160408 NS9530 Tungaloy insert and contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical consultation and procurement assistance Technical data Article number: 6997705 Manufacturer SKU: TUN6997705 SKU: 6997705-Tungaloy Manufacturer article number: 6997705 Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Double-sided chipbreaker Central cylindrical hole Material: Hartmetall Grade: NS9530 Application: Turning Model series: ISO-Drehwendeschneidplatten Special features Uncoated cermet cutting material Triangular plate form (TNMG) Suitable for finishing steel with continuous cut Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness System composition: ISO insert, external holder or boring bar, shim/clamp set and replacement screws FAQ What machining tasks is this insert best suited for? The TNMG160408 NS9530 Tungaloy insert is intended for finishing operations on steel where a sharp cutting edge and low cutting forces are required. Is the cutting material coated? No, the NS9530 grade is an uncoated cermet, selected for its fine edge and surface-finish capability in continuous finishing cuts. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves surface finish while maintaining sufficient edge strength for fine turning, reducing vibration in stable setups. Can this insert be used in standard ISO holders? Yes; compatibility is determined by plate form, clearance angle, tolerance class, fastening method, size and thickness and the insert should be mounted in a matching ISO external holder or boring bar. What is included in the system when ordering? The primary article is the ISO insert; a complete working system typically includes the matching external holder or boring bar, shim/clamp set and replacement screws, which should be selected to suit the insert form and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated cermet cutting edge, a fine R0.8 corner radius and ISO conformity for consistently high surface finish in finishing operations; order the insert directly via Metav Werkzeuge or consult our specialists if clarification is required. TNMG 160408 NS9530 Tungaloy turning insert A TNMG160408 NS9530 Tungaloy insert designed for precision finishing in steel turning applications with a sharp cermet grade for low cutting forces and excellent surface quality Uncoated cermet grade NS9530 Fine corner radius R0.8 for high finish Double-sided chipbreaker for consistent chips ISO TNMG160408 triangular insert, 60° Precision finish for demanding turning operations The combination of an uncoated cermet cutting material and a finely honed edge provides a clear advantage when the priority is surface quality rather than heavy stock removal. The NS9530 grade is engineered as a finishing grade for steels, delivering low cutting forces and a sharp edge that supports continuous cuts and small depths of cut. This results in a reduction of vibration at the tool–workpiece interface and contributes to a repeatable surface finish without resorting to excessive machine adjustments. The result is less time spent on downstream polishing and predictable part quality. Stable chip control and consistent process results A double-sided chipbreaker paired with the sharp cermet substrate stabilises chip formation during continuous turning, which reduces the risk of built-up edge and helps maintain tool life under finishing conditions. The insert’s geometry supports controlled chip flow even at low feed rates, so operators experience fewer interruptions and maintain steady cycle times. Where reproducible results are essential, the predictable behaviour of this insert contributes to process reliability and fewer rejects in serial production. Dimensional reliability and straightforward mounting Conformity to the ISO designation TNMG160408 ensures compatibility with standard triangular turning holders; the insert is supplied with a cylindrical hole and nominal thickness of 4.76 mm, facilitating secure clamping and repeatable positioning. The 0° clearance angle and the 60° included angle of the triangle together define the engagement geometry and influence cutting forces and tool reach in external and internal turning. The combination of corner radius R0.8 and the specified geometry makes the insert particularly suitable where close tolerances and consistent part profiles are required. Application guidance for improved productivity This indexable insert is optimised for finishing steel components with continuous cutting conditions and modest depths of cut. Selecting NS9530 as an uncoated cermet grade is a deliberate choice for operations where a sharp cutting edge and fine surface finish are decisive. For best results, pair the insert with a rigid holder and moderate spindle speeds to exploit the low cutting forces; choosing the correct chipbreaker version and matching feed rates will extend effective tool life. For assistance in selecting the right combination of holder, screw and clamping set, technical consultation is available to align insert choice with machining strategy and production targets. Contact information: info@metav-werkzeuge.com / +49 2822 7131930. Discuss Tungaloy NS9530 cermet inserts with Metav Werkzeuge to optimise finishing performance and ensure prompt availability through the Metav Werkzeuge team Technical data Article number: 6998208 SKU: 6998208-Tungaloy Manufacturer SKU: TUN6998208 Manufacturer: Tungaloy Facts Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Grade: NS9530 (uncoated cermet) Material: cemented carbide Insert shape: triangular Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts Mounting: ISO-compatible clamping and screw FAQ Is this insert suitable for finishing steel? Yes. The TNMG160408 NS9530 insert is a finishing-grade cermet designed specifically for steel finishing, offering a sharp edge and low cutting forces for high surface quality. Can the insert be used for internal and external turning? Yes. The triangular geometry and 60° included angle suit both external and internal turning when paired with an appropriate holder. What is the main benefit of the NS9530 grade? NS9530 provides a sharp, uncoated cutting edge that reduces cutting forces and improves surface finish during continuous cuts on steel. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker supports consistent chip formation and evacuation, leading to steadier cutting conditions and more predictable tool life. Which holders are compatible with this insert? ISO-compatible triangular turning holders designed for TNMG160408 inserts are compatible; ensure matching thickness, hole style and clamping geometry for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance and low cutting forces make the TNMG160408 NS9530 an economical choice for precision turning; its uncoated NS9530 cermet grade delivers a sharp edge and excellent surface quality, while compatibility with ISO holders ensures straightforward integration. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific setup. TNMG160408 NS9530 ISO triangular turning insert for turning – Tungaloy TNMG160408 NS9530 is a 60° ISO triangular indexable insert designed for precision external and internal turning, optimised for fine finishing on steel with a low cutting-force approach ISO-standard 60° triangular geometry NS9530 uncoated cermet for fine finishing Double-sided chipbreaker for stable chip control 0.8 mm corner radius for superior surface finish Achieve consistent fine finishes with low cutting forces The grade NS9530, an uncoated cermet, is developed for finishing operations where a sharp cutting edge and low cutting forces matter. This insert combines a small 0.8 mm corner radius with a 60° geometry to deliver reproducible surface quality on steel during continuous cuts and small depth-of-cut operations. The result is less rework, fewer passes to tolerance and a measurable improvement in component appearance and dimensional consistency. The material behaviour of cermet supports stable cutting at finishing speeds, reducing burr formation and improving dimensional control. Stable chip control and predictable tool life Equipped with a double-sided chipbreaker, the insert supports predictable chip formation across a range of finishing feeds. The 0° rake and optimised chipformer promote tight chips and reduce the risk of built-up edge, which in turn prolongs effective cutting time and reduces quality variation. The double-sided design also offers economical indexability: two usable cutting edges per side extend the usable life before replacement is required. For production environments seeking repeatable cycles and reduced tool change frequency, this geometry offers a reliable balance between performance and economy. ISO compatibility for quick integration into existing toolholders As an ISO-standardised triangular insert, the plate is compatible with holders that match the plate’s form, clearance angle, tolerance class, fastening and thickness. The system typically comprises an ISO turning insert, a matching external holder or boring bar, a clamping pad or clamp set and replacement screws. Because the insert follows ISO norms, setup time is reduced and inventory management is simplified: holders and spares are interchangeable within the same ISO family, helping to streamline spindle changeovers and reduce downtime in mixed production runs. Targeted use: finishing steel in external and internal turning This insert is intended primarily for finishing tasks on steel where surface quality and dimensional control are priorities. Its NS9530 cermet composition and fine edge geometry support continuous cutting and small feed operations typical of final-pass machining. In practice, the insert performs well on turned components requiring tight surface finish specifications, such as shafts, bushes and precision mating surfaces. Select the appropriate holder stability and feed strategy to exploit the insert’s strengths and avoid excessive overhang to maintain edge life and part quality. Contact Metav Werkzeuge today for application advice and to arrange supply of Tungaloy TNMG160408 NS9530 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944859 Manufacturer SKU: TUN6944859 SKU: 6944859-Tungaloy Model series: ISO turning indexable inserts Core technical data Insert designation: TNMG160408 ISO code: 160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 60° Rake angle: 0° Hole: with hole (cylindrical) Double-sided chipbreaker Design and features Grade: NS9530, uncoated cermet Application: Turning (external and internal) Plate form: triangular Finishing grade for steel with sharp cutting edge Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The TNMG160408 NS9530 is formulated as a finishing grade primarily for steel; its NS9530 cermet composition delivers low cutting forces and excellent surface quality on steel workpieces. Can the insert be indexed and reused on both sides? Yes. The insert features a double-sided chipbreaker and a triangular form that allow multiple indexing positions, offering economical edge usage before replacement. What holder characteristics are needed for correct use? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; use a suitably rigid external holder or boring bar matched to the ISO plate family for best results. How does the NS9530 cermet compare to conventional carbide for finishing? NS9530 cermet provides a sharper edge and improved surface finish in finishing cuts, often with lower cutting forces than some cemented carbides; it is particularly effective in continuous cutting and small depth-of-cut scenarios. What are the key dimensions and geometry to note when ordering? Key specifications include the ISO code 160408, 16 mm size, 4.76 mm thickness, 0.8 mm corner radius and 60° triangular geometry, as listed in the technical data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a low-force, fine-finishing grade and ISO compatibility for consistent part quality; the uncoated NS9530 cermet delivers a sharp cutting edge and high surface finish while the triangular TNMG160408 geometry ensures straightforward indexability. Order this insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNMG160408 NS9530 TNMG turning insert – uncoated cermet for finishing, Tungaloy The TNMG160408 NS9530 is an ISO-standard triangular turning insert designed for external and internal turning, optimised as a finishing grade for steel with a sharp cutting edge and low cutting forces. ISO-standard triangular insert TNMG format Uncoated NS9530 cermet for fine finishing Double-sided chipbreaker for versatile use 0.8 mm corner radius with cylindrical hole High-quality finishing with reduced cutting forces The uncoated NS9530 cermet grade is formulated for fine finishing of steel: its sharp, stable cutting edge reduces cutting forces and promotes excellent surface quality in continuous cuts and small depths of cut. This makes the insert particularly suitable where dimensional accuracy and surface integrity matter. The cermet substrate combines wear resistance with a propensity for smooth chip formation, translating directly into fewer reworks and predictable process outcomes. ISO compatibility and secure mounting for reliable production Delivered in the ISO series for turning, the insert’s triangular TNMG160408 geometry and cylindrical hole ensure compatibility with standard external holders and boring bars. Compatibility depends on form, free angle and size; the TNMG form, a 60° included angle and a 0° free rake specification accommodate most standard ISO clamping systems. The double-sided configuration increases tool life and reduces tooling cost per part by allowing indexation on both cutting edges. Design details that support everyday workshop efficiency Key dimensions such as the 0.8 mm corner radius, 4.76 mm plate thickness and the 16 size designation give straightforward guidance for selecting holders and setting cutting parameters. The double-sided chipbreaker provides predictable chip control for finishing operations; combined with the uncoated cermet grade, it supports continuous cutting strategies with stable temperatures and consistent surface results. The insert forms part of a system that includes the ISO plate, a matching holder or boring bar, a shim/clip set and replacement screws, facilitating quick changeover and reduced downtime. Select the right chipbreaker and grade for the task For best results, pair this finishing insert with a holder and stability level suited to light to medium interrupted cuts. The uncoated NS9530 grade is optimised for low cutting forces and excellent surface finishes rather than heavy roughing: choose an alternative chipbreaker or a tougher grade if higher depths of cut or interrupted operations are required. This selective approach ensures process efficiency and extends tool life, supporting predictable machining cycles and fewer unplanned interventions. Contact Metav Werkzeuge for tailored advice on tool-holder pairing and process optimisation or request a specification sheet from Metav Werkzeuge at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998266 Facts Angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 Free rake: 0° Special features Model series: ISO turning inserts Grade: NS9530 Cutting material type: uncoated cermet Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Material: cemented carbide Application: turning Manufacturer SKU: TUN6998266 Manufacturer article number: 6998266 FAQ What materials is this insert best suited for? This finishing insert is optimised for steel machining; the NS9530 uncoated cermet grade delivers low cutting forces and high surface quality on continuous steel turning. Can the insert be indexed to use multiple cutting edges? Yes, the triangular TNMG form is double-sided and can be indexed, allowing use of multiple cutting edges before replacement. How does the cylindrical hole affect clamping? The cylindrical hole provides secure location in compatible ISO holders and supports precise repeatability during tool changes. Is this insert suitable for roughing operations? The TNMG160408 NS9530 is a finishing grade; for heavy roughing or interrupted cuts a tougher grade or different chipbreaker should be selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com