TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance and cost-efficient, double-sided indexing for a reliable turning process — order directly via Metav Werkzeuge or consult our specialists for application-specific chipbreaker and holder recommendations. TNMG 160408 NS9530 Tungaloy turning insert — uncoated cermet finishing grade TNMG160408 NS9530 Tungaloy is an ISO-indexable turning insert designed for fine finishing of steel components in turning operations TNMG geometry for ISO holders Uncoated cermet for high surface finish 0° clearance angle for precise finishing Double-sided triangular design for cost efficiency High-quality finishing for steel with an uncoated cermet grade The NS9530 grade is an uncoated cermet developed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and consistently high surface quality. As a finishing grade, it is optimised for continuous cutting and small depths of cut; this reduces vibration and promotes stable chip formation during low-feed, high-precision passes. The cermet substrate delivers good wear behaviour in finishing conditions while the lack of coating helps maintain a keen edge, which is particularly useful where excellent part appearance and tight tolerance maintenance are required. Proven geometry and dimensional compatibility for ISO systems Compatibility with toolholders depends on form, clearance, tolerance class, clamping and the plate dimensions. This insert features a triangular form with a 60° included angle and a 16 mm size, making it suitable for standard ISO holders that accept TNMG profiles. The insert has a cylindrical hole for secure fastening and a thickness of 4.76 mm, supporting rigid clamping. The geometry and tolerance specifics ensure repeatable positioning, simple indexability and predictable tool life when paired with a matching external holder or boring bar and the appropriate clamping set. Design features that translate into productive turning results A 0° clearance angle is combined with a 0.8 mm nose radius, delivering a balanced trade-off between edge strength and surface finish capability. The double-sided construction provides two usable edges per side, improving economy in production by extending the number of indexable positions. For finishing passes, the reduced cutting forces of the grade and the sharp edge reduce built-up edge and minimise the risk of surface smearing, which helps maintain dimensional accuracy and reduces downstream polishing or rework. Practical system considerations and process guidance The insert is part of a system comprising the indexable plate, a matching external holder or boring bar, an underlay/clamping kit and replacement screws. Selecting the correct chipbreaker in conjunction with the NS9530 grade is important: choose a breaker that matches the workpiece material, the stability of the setup and the type of cut to be carried out. The insert’s uncoated cermet composition suits steady, low- to medium-feed finishing cycles; for interrupted cuts or heavy stock removal, alternative grades or geometries should be considered. Maintenance is straightforward: inspect seating surfaces and clamping hardware at each index change to ensure consistent positioning. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and to confirm holder compatibility; our team can help specify the ideal chipbreaker and clamping set for the application Technical data Article number: 6998281 Manufacturer SKU: TUN6998281 SKU: 6998281-Tungaloy Model series: ISO-indexable turning inserts Material: cemented carbide Grade: NS9530 Facts ISO designation: 160408 Included angle: 60° Size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Special features Uncoated cermet cutting material (NS9530) Triangular plate, double-sided indexable Cylindrical hole for secure clamping Intended application: turning, finishing on steel System components: insert, compatible outer holder/boring bar, underlay/clamping set, spare screws Optimised for continuous cutting and small depths of cut FAQ What materials is this insert intended for? The NS9530 grade is designed primarily for finishing operations on steel; the insert excels where a sharp edge and low cutting forces are required. How many indexable edges are available on the plate? The triangular, double-sided design provides multiple usable edges, extending service life through economical indexing. What holder compatibility must be checked before use? Compatibility depends on form, clearance, tolerance class, clamping style, plate size and thickness — ensure the holder accepts TNMG 160408 geometry. Is this insert coated? No — the grade is an uncoated cermet (NS9530), which helps retain a sharp cutting edge suitable for fine finishing. Which system components are needed to assemble the cutting setup? A matching external holder or boring bar, an underlay/clamping kit and replacement screws are required to secure the insert for reliable turning performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and ISO compatibility to deliver consistent surface quality with low cutting forces; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNMG 160408 NS9530 Tungaloy turning insert — 60° triangular finishing insert, 0.8 mm radius TNMG 160408 NS9530 Tungaloy turning insert designed for precision external and internal turning, offering a sharp cutting edge and excellent surface finish for continuous cutting and small depths of cut TNMG 160408 NS9530 cermet finishing grade Sharp edge for low cutting forces Double-sided chipbreaker with hole ISO 60° triangular format Precise finishing performance for steel turning The NS9530 uncoated cermet grade is designed as a finishing solution where surface quality and low cutting forces are decisive. Its sharp cutting edge reduces ploughing and enables superior optical and geometric results on steel components; this translates into fewer secondary operations and reduced polishing time. Cermet, a ceramic–metal composite, combines wear resistance with a fine-grain edge that maintains form under continuous cutting, so operations with small depths of cut and steady feed rates achieve consistent finishes. The combination of a defined edge geometry and the 0.8 mm radius yields predictable tool behaviour and repeatable part quality. Reliable system compatibility and easy integration As an ISO-format turning plate, the TNMG family relies on correct pairing with a matching holder. Compatibility is determined by shape, relief angle, tolerance class, fastening, size and thickness; this TNMG 160408 insert uses the standard 60° triangular form with a cylindrical hole and a plate thickness of 4.76 mm, enabling secure clamping and indexed use. The double-sided chipbreaker extends usable life by allowing re-indexing, while the central hole improves location and repeatability in many popular external holders. Specifying holders and clamping kits that match the insert’s geometry ensures stable cutting, accurate runout and predictable tool life in productive turning cells. Shop-floor benefits: efficiency, consistency, and predictable outcomes Adopting the NS9530 finishing grade supports a productivity-first approach: the low cutting forces reduce spindle load and can enable higher feed rates within finishing windows, while the consistent edge condition lowers the frequency of manual inspections. For production environments where part-to-part consistency matters, the insert’s geometry and chip control provide predictable swarf formation and easier handling. The ISO standard format simplifies inventory management and reduces tool-change complexity across multiple lathes. When combined with appropriate cutting data and stable setup, the result is shorter cycle times, fewer reworks and a measurable improvement in first-pass yield. For precision finishing with the NS9530 grade, contact Metav Werkzeuge to discuss holder compatibility or to place an order — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998220 Manufacturer SKU: TUN6998220 Manufacturer item number: 6998220 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160408 NS9530 Facts Angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 16 mm Relief angle: 0° ISO code: 160408 Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: double-sided Hole style: cylindrical hole Plate shape: triangular (TNMG) Typical application: external and internal turning System: ISO turning plate, compatible with appropriate holder and clamping set FAQ Which materials is this grade best suited for? The NS9530 grade is optimised for finishing steel; the TNMG 160408 insert offers a sharp edge and low cutting forces tailored to continuous cuts and small depths of cut in steel turning. Can the insert be re-indexed to use multiple edges? Yes, the triangular TNMG format is double-sided and designed for indexable use; the TNMG160408 NS9530 can be rotated to present fresh cutting edges while maintaining location via the cylindrical hole. What should be considered when selecting a holder? Holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; choose an external holder that matches the 60° triangular form and 4.76 mm thickness for correct clamping and repeatable results. Is this insert suitable for interrupted cuts? The NS9530 finishing grade is primarily intended for continuous cutting and small depths of cut; for heavy interruption or roughing, a different grade optimised for shock resistance would be preferred. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and broad holder compatibility for reliable turning of steel components; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG 160408 NS9530 turning insert — uncoated cermet, 0.8 mm nose radius (Tungaloy) TNMG160408 NS9530 Tungaloy is an ISO‑standard indexable insert for precision turning, especially suited to fine finishing of steel components where low cutting forces and excellent surface quality are required. TNMG 160408 triangular insert, 60° angle Uncoated cermet grade NS9530 0.8 mm nose radius for fine finish Double-sided chipbreaker, with cylindrical hole Precision finishing with reduced cutting forces The uncoated cermet grade NS9530 is developed for finishing operations on steel, offering a sharp cutting edge and consistently low cutting forces. This behaviour supports improved surface quality and reduced workpiece distortion during light cuts. Where continuous cutting and small depths of cut are typical, the insert’s geometry delivers a predictable, repeatable finish that benefits batch production and single-part machining alike. The indexable design also simplifies re-indexing and reduces tool change times, aiding overall process efficiency. Stable clamping and broad holder compatibility Designed as an ISO indexable turning insert, the TNMG shape and dimensions conform to standard holder interfaces; compatibility is determined by form, clearance, tolerance class, fastening and thickness. The cylindrical hole and tolerance-compliant geometry ensure stable clamping in appropriate TNMG pockets, helping to maintain cutting edge position and minimise vibration. For workshops seeking predictable tool life and consistent component tolerances, the combination of standard form and robust seating improves process stability. Geometry tailored for fine turning and surface quality With a 60° included angle and a 0.8 mm nose radius, the insert balances edge strength and the ability to produce fine surface finishes. The double-sided chipbreaker supports controlled chip formation in finishing cuts, reducing the risk of surface blemishes and facilitating chip evacuation. Materials engineers will appreciate that the grade is optimised for continuous cutting on steel, making it suitable for components that demand tight surface specifications rather than heavy roughing. Practical benefits for workshop productivity Using a dedicated finishing grade such as NS9530 reduces secondary finishing steps and can shorten production cycles. The insert’s indexable nature means multiple usable edges per insert, which reduces tooling inventory and handling time. For job shops and production environments aiming to raise first-pass quality while keeping tool management straightforward, the insert provides a clear operational advantage through improved surface consistency and simplified re-indexing. For precision finishing on steel components, consider the Tungaloy NS9530 grade — contact Metav Werkzeuge for cut recommendation and holder compatibility at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998216 Manufacturer SKU: TUN6998216 SKU: 6998216-Tungaloy Type: TNMG160408 Model series: ISO indexable turning inserts Data Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Grade: NS9530 Cutting material: uncoated cermet Special features Insert shape: triangular Chipbreaker: double-sided Typical application: external and internal turning Compatible system: ISO‑standard turning insert holders Substrate: cemented carbide FAQ What machining tasks suit this insert best? The TNMG160408 NS9530 Tungaloy insert is geared to finishing operations on steel where low cutting forces and high surface quality are priorities; it is intended for continuous cutting and small depths of cut. Is the grade NS9530 suitable for interrupted cuts or roughing? NS9530 is a finishing grade optimised for continuous cuts; for interrupted cutting or heavy roughing, a tougher grade or a different chipbreaker geometry is recommended. How does the hole and hole style affect clamping? The cylindrical hole provides standardised seating for compatible TNMG holders, contributing to secure clamping and repeatable positioning in ISO‑compliant tool systems. Can this insert be used for internal turning as well as external? Yes, the insert’s ISO TNMG form and chipbreaker design make it suitable for both external and internal turning operations when mounted in appropriate holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, stable geometry and efficient changeover to keep production running smoothly; the uncoated NS9530 cermet grade delivers low cutting forces and excellent surface quality, while the ISO triangle form ensures straightforward indexation and repeatability. Order the TNMG160408 directly via Metav Werkzeuge or ask their consultants for application-specific cutting data. TNMG160408 NS9530 Tungaloy turning insert — uncoated cermet finishing grade, 60° triangular design TNMG160408 NS9530 Tungaloy turning insert is an ISO‑standard triangle insert designed for finishing in steel; the geometry and chip control are optimised for continuous cuts and small depths of cut Uncoated cermet grade NS9530 Sharp edge for fine finishing 0.8 mm corner radius for precision Double-sided triangular ISO design High‑quality finishing for steel turning applications The TNMG160408 in NS9530 is an uncoated cermet finishing grade formulated to produce an excellent surface finish on steels. Its sharp cutting edge keeps cutting forces low, which reduces vibration during continuous turning and supports consistent dimensional accuracy. For operations where fine tolerance and surface integrity matter, this insert reduces the need for secondary finishing steps. The finishing grade is particularly suitable for small depths of cut and steady feed conditions typical in external and internal turning. Geometry engineered for stability and repeatable results A triangular 60° insert with a 0.8 mm corner radius and 0° free rake delivers a balance between edge strength and sharpness. The double-sided chipbreaker offers two indexable cutting edges per side, improving economy without compromising performance. The 4.76 mm thickness contributes to rigidity under load, while the insert’s form and tolerances support repeatable seating and secure clamping in compatible holders, reducing setup variation and downtime. System compatibility and simple integration Built to ISO dimensions, the insert fits established turning tool systems when matched by form, free angle, tolerance class, fastening method, size and thickness. The triangular form and cylindrical hole permit secure fixing with conventional clamping sets and replacement screws as part of a modular system: insert, compatible external holder or boring bar, shim/clamp set and spare screws. This standardisation simplifies inventory management and accelerates tool exchanges on the shop floor. Operational benefits and economic rationale Using a finishing‑oriented cermet grade such as NS9530 can shorten cycle chains by delivering better surface quality in one pass, which contributes to process efficiency and lower overall machining cost per part. The insert’s combination of a sharp edge and stable substrate supports predictable wear patterns and consistent part quality. For tailored parameters or material‑specific advice, Metav Werkzeuge’s technical consultants can provide recommended feeds, speeds and trial setups to optimise productivity for a given machine and application. For tailored cutting data or to integrate this Tungaloy NS9530 finishing insert into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice Technical data Article number: 6998197 Manufacturer SKU: TUN6998197 SKU: 6998197-Tungaloy Model series: ISO turning indexable inserts Core specifications Geometry angle: 60° Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle (size): 16 Free rake angle: 0° Hole: with cylindrical hole Double-sided insert (indexable edges) Material & features Grade: NS9530 Cutting material: uncoated cermet Substrate: cemented carbide Chipbreaker: double-sided Form: triangular Application: turning (external and internal), continuous cuts and small depths of cut FAQ What materials is this insert intended for? The TNMG160408 NS9530 insert is formulated as a finishing grade for steels and is best used in continuous turning operations and small depth‑of‑cut applications. How many cutting edges are usable on the insert? The insert is double‑sided and triangular, providing multiple indexable edges; this configuration enhances economy by allowing several re‑uses before disposal. Is this insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions; compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness and it seats in standard triangular ISO holders when these match. What cutting geometry contributes to surface quality? The combination of a sharp edge, 0.8 mm corner radius and 0° free rake helps to maintain low cutting forces and a stable cut, both of which contribute directly to improved surface finish. Can this insert be used for interrupted cuts? This finishing grade is optimised for continuous cuts and small passes; interrupted operations may require a more robust grade or a different chipbreaker configuration to avoid premature edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, ISO compatibility and low cutting forces for consistent finishing quality in turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. TNMG160408 NS9530 Tungaloy turning insert — uncoated cermet, finishing grade for steel A TNMG160408 NS9530 indexable turning insert engineered for finishing operations on steel, optimised for continuous cuts and small depths of cut. Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker for consistent chips ISO-standard form for easy holder compatibility Achieve consistent, high-quality surface finishes on steel The uncoated cermet grade NS9530 is formulated specifically as a finishing grade for steel, delivering a sharp cutting edge that reduces cutting forces and promotes a high surface finish. Cermet combines ceramic and metallic properties to provide reduced built-up edge tendency and improved dimensional stability in continuous turning. For users unfamiliar with the material class, this means a cutting-edge geometry and microstructure that support fine feeds and small depths of cut with lower reliance on heavy coolant use, translating into predictable part quality and reduced rework. Stable chip control for uninterrupted production runs A well-matched double-sided chipbreaker ensures consistent chip formation during extended cutting cycles, which helps to avoid irregular vibrations and tool pressure peaks. The chipbreaker geometry is adapted to the finishing role of the grade, producing short, controllable chips in steady-state conditions; this reduces the likelihood of surface damage and interruptions. By stabilising the process, the insert contributes to higher machine uptime and more reliable cycle times, a clear rational advantage for production environments focused on repeatability and throughput. ISO conformity and straightforward integration into existing tool systems Designed to ISO dimensions for TNMG inserts, the plate offers straightforward compatibility with common indexable holders; compatibility is defined by form, 0° relief angle, tolerance class, fastening, size and thickness. The triangular 16 mm outline and 4.76 mm plate thickness, together with a cylindrical hole, permit quick mounting and secure clamping in standard pockets. This ISO conformity speeds up tool changeover and simplifies inventory management, reducing the need for holder modification or bespoke toolholders. Practical recommendations for efficient finishing applications For finishing applications, employ the grade in continuous cuts with small depths of cut and moderate feed rates to exploit the low cutting forces and achieve the best surface quality. The indexable design is suitable for both external and internal turning when a precise seat and correct clamping torque are ensured. If process conditions vary, select the chipbreaker and cutting data matched to workpiece stability to maintain the intended surface result. Technical guidance is available for fine-tuning cutting parameters to the specific machine and workpiece combination. Contact Metav Werkzeuge for application recommendations on Tungaloy finishing inserts or to request the TNMG160408 NS9530 Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: 6998274 Manufacturer SKU: TUN6998274 SKU: 6998274-Tungaloy Model series: ISO indexable turning inserts Designation: TNMG160408 NS9530 Tungaloy insert Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Plate size: 16 mm Plate thickness: 4.76 mm Features Grade: NS9530 (uncoated cermet) Material: carbide Chipbreaker: double-sided Shape: triangular Hole: cylindrical, with hole Application: turning — external and internal finishing Compatibility: ISO holders (form, relief angle, tolerance class, fastening, size, thickness) FAQ What materials is the TNMG160408 NS9530 suited for? The TNMG160408 NS9530 insert is specified for finishing operations on steel, offering low cutting forces and a sharp edge that favour continuous cutting and high surface quality. Is this insert compatible with standard ISO holders? Yes — the TNMG160408 NS9530 conforms to ISO dimensions; compatibility is achieved when holder form, 0° relief angle, tolerance class, fastening, size and thickness match the plate. Does the TNMG160408 NS9530 feature a chipbreaker? Yes, the TNMG160408 NS9530 is supplied with a double-sided chipbreaker designed for consistent chip control in finishing applications. Is the grade coated or uncoated? The NS9530 grade for the TNMG160408 insert is uncoated cermet, optimised for surface finish and low cutting forces in steel machining. What machining style suits this insert best? The TNMG160408 NS9530 is best applied to turning tasks that require finishing, particularly continuous cuts with small depths of cut to exploit the grade's low cutting-force characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T505 Wendeplatten - Tungaloy
Benefit from economical, CVD-coated carbide in grade T505, a 0.8 mm corner radius and a double-sided chipbreaker that together increase throughput for cast-iron turning; order directly via Metav Werkzeuge or consult the team for application support. TNMG160408 T505 TNMG – Indexable turning insert for Turning (Tungaloy) The TNMG160408 T505 is an ISO-standard triangular indexable turning insert designed for efficient external and internal turning of cast iron, featuring a CVD-coated carbide grade optimised for economical, high-stability machining. CVD-coated carbide grade T505 for cast iron Triangular ISO insert, size 16 mm, 0.8 mm radius Double-sided chipbreaker for stable chip control Cylindrical hole, 4.76 mm plate thickness Faster, more economical cast-iron turning through optimised grade and geometry The combination of a CVD-coated carbide matrix and the T505 grade delivers a cost-effective balance between tool life and cutting speed for grey and nodular cast iron applications. The insert’s double-sided chipbreaker is engineered to support consistent chip formation and evacuation, reducing interruptions and enabling longer continuous cuts. With a 0.8 mm corner radius, the component provides improved edge strength compared with very small radii while still permitting fine profile work. These technical choices translate into measurable productivity gains on the shop floor: fewer tool changes, reduced downtime and more consistent cycle times. Consistent clamping, reproducible results and simple holder compatibility As an ISO 160408 designation, the triangular insert follows standard dimensions and tolerances that simplify selection of a matching turning holder. The triangular form and the presence of a cylindrical hole allow secure mounting and repeatable positioning; the plate thickness of 4.76 mm and the specified relief angle of 0° are key parameters when checking holder compatibility. Where holders vary by form, clearance angle or tolerance class, the insert’s standardised geometry makes verification straightforward and supports predictable repeatability in serial production. The precise specification aids process engineers in calculating cutting parameters and establishing stable feeds and speeds. System thinking: how the insert fits your workflow and what to consider This insert is intended to be used as part of a complete system: the indexable insert, a compatible external holder or boring bar, an appropriate clamp or shim and the correct screw. For reliable performance, choose the chipbreaker style and the T505 grade according to workpiece stability, interrupted cuts and required cutting speed. The insert is especially suited to cast-iron turning where a balance of wear resistance and economical tool life is required. For complex or high-volume applications, technical consultation can help tailor holder selection, cutting data and tool-change intervals to the production environment. If additional technical information is required, Metav Werkzeuge provides support by email and phone to verify fit and suitability. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy TNMG160408 T505 indexable turning insert; consultants assist with holder matching and process parameters Technical data Manufacturer article number: 6831364 SKU: 6831364-Tungaloy Manufacturer SKU: TUN6831364 Model series: ISO indexable turning inserts Core data ISO designation: 160408 Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Relief angle: 0° Insert shape: triangular Hole: cylindrical Insert angle: 60° Special features Carbide, CVD-coated (grade T505) Double-sided chipbreaker For cast iron machining ISO-standardised geometry Designed for external and internal turning FAQ What materials is this insert suitable for? The TNMG160408 T505 insert is specified for machining cast iron, with the CVD-coated T505 grade optimised for economic performance on these materials. How is the insert mounted in a holder? Mounting uses the insert’s cylindrical hole together with the matching clamp or shim in a compatible ISO turning holder; the ISO 160408 designation helps ensure correct fit. What advantages does the T505 grade provide? The T505 CVD-coated carbide grade is chosen for a balance of wear resistance and economy, supporting efficient machining of cast iron while maintaining acceptable tool life. How does the chipbreaker affect production? The double-sided chipbreaker promotes controlled chip formation and evacuation, which stabilises cutting conditions and reduces the risk of downtime caused by poor chip control. How many indexable corners are available with a triangular insert? The triangular design provides multiple indexable corners; the ISO-standard form of the TNMG160408 allows straightforward indexing to restore a fresh cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T505 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T505 and the 0.8 mm corner radius for stable, economical turning of cast iron; the ISO-standard triangular form and cylindrical hole ensure secure clamping and simple integration into existing holders — order the insert via Metav Werkzeuge or request application advice from our specialists. TNMG160408 T505 turning insert — triangular ISO insert for turning by Tungaloy The TNMG160408 T505 is an ISO-standard triangular turning insert designed for economical external and internal turning of cast iron, featuring a CVD-coated carbide grade optimised for wear resistance. ISO-standard triangular insert CVD-coated carbide grade T505 Optimised for cast iron turning Double-sided chipbreaker, cylindrical hole Faster, more consistent results for turning operations The CVD-coated carbide in grade T505 combines wear resistance with thermal stability, producing consistently reliable cutting performance during continuous production. The triangular geometry with a 60° included angle and a 0.8 mm corner radius balances edge strength and surface finish: the modest radius increases tool life on interrupted cuts while still supporting acceptable component roughness. This results in fewer indexings and reduced non-productive time, which contributes directly to improved process efficiency and lower unit cost per part. Material-specific behaviour and why this matters Designed specifically for the economical machining of cast iron, the coating and substrate pairing control heat and adhesion at the cutting edge. The T505 grade is suited to a range of cast-iron alloys and cutting conditions; the double-sided chipbreaker offers flexibility when matching chip control to the chosen feed and cutting speed. For less experienced planners, a brief explanation: a chipbreaker shapes chips to avoid entanglement and improve evacuation, which in turn protects the tool edge and the workpiece integrity during turning. Secure clamping and straightforward integration The insert is ISO-standard, so compatibility with external holders or boring bars is governed by plate shape, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole and the 4.76 mm plate thickness provide a stable clamping interface that reduces vibration and improves repeatability when used with the appropriate clamp set and retaining screw. This mechanical stability supports higher cutting parameters where machine rigidity and fixture design permit. Operational benefits and lifecycle economy Selecting an insert graded for the material and application reduces downtime for tool changes and lowers overall tooling cost. The combination of CVD-coated carbide and the triangular form enables multiple indexing positions per plate, extending useful life under stable cutting conditions. For shops seeking predictable performance, this insert supports reproducible surface quality and helps maintain cycle time targets, delivering a measurable contribution to production throughput and cost-effectiveness. Contact Metav Werkzeuge for application support and ordering of Tungaloy TNMG160408 T505 inserts — technical specialists are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6831351 SKU: 6831351-Tungaloy Manufacturer SKU: TUN6831351 Manufacturer article number: 6831351 Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° ISO designation: 160408 Special features CVD-coated carbide substrate Grade T505 Triangular plate Cylindrical hole Double-sided chipbreaker ISO-standard turning insert Intended application: turning (external and internal) Suitable for machining cast iron FAQ What materials is this insert intended for? The TNMG160408 T505 insert from Tungaloy is specified for economical machining of cast iron; the T505 grade and CVD-coated carbide substrate are formulated to manage wear and heat when turning cast-iron alloys. How does the TNMG160408 designation relate to the insert geometry? The designation TNMG160408 denotes the triangular form and ISO size series; the code corresponds to the plate shape and dimensions used for selecting compatible holders and fixtures for the Tungaloy turning insert. What mounting requirements should be observed? Mounting depends on holder compatibility: shape, clearance angle, tolerance class, fastening method, size and thickness must match; the TNMG160408 features a cylindrical hole and 4.76 mm thickness to enable stable clamping in standard ISO holders. What is the practical effect of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving resistance to edge chipping on interrupted cuts while still allowing acceptable surface finish in many turning applications with the TNMG160408 T505. Is chip control addressed by the insert design? Yes — the TNMG160408 includes a double-sided chipbreaker to assist chip shaping and evacuation, aiding process reliability and operator safety during turning of cast iron. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a 0.8 mm corner radius and double-sided chip control for consistent high-speed turning of cast iron; order directly via Metav Werkzeuge or consult the technical team for holder compatibility. TNMG 160408 T5105 triangular indexable insert for turning — Tungaloy The TNMG160408 T5105 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable cutting conditions. CVD-coated cemented carbide T5105 for wear resistance Optimised for high-speed machining of cast iron ISO triangular insert, 60° cutting geometry Double-sided chipbreaker with central cylindrical hole Consistent high-speed performance through wear-resistant coating The insert’s CVD-coated cemented carbide grade T5105 delivers improved resistance to abrasive wear, making it suitable for sustained high cutting speeds when machining cast iron. The coating reduces flank wear under stable cutting conditions and supports a stable chip formation, which in turn helps to maintain surface finish and dimensional consistency across production runs. The double-sided design doubles usable edges per insert, lowering tooling costs per component while maintaining repeatable cutting behaviour. Secure seating and predictable cutting geometry for faster setup Made to the ISO specifications, the triangular geometry with a 60° cutting angle and a 0° clearance ensures predictable engagement with standard external and internal holders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The central cylindrical hole permits reliable registration and clamping in holders designed for indexable inserts, reducing the risk of movement during heavy cuts. The 0.8 mm corner radius balances edge strength and achievable radii on the workpiece, offering a compromise between robustness and surface definition. Reduced downtime and improved process stability for series production Selecting an insert with stable chip control and a wear-resistant grade helps to cut changeover frequency and supports longer uninterrupted cycles on lathes and turning centres. For production environments processing cast iron parts, the combination of a dedicated chipbreaker and a CVD-coated substrate stabilises the cutting forces and reduces the likelihood of unexpected tool failure. The result is more predictable cycle times and an improved return on tool investment through fewer stoppages and consistent part quality. Practical selection advice and integration into existing tool systems When integrating this ISO triangular insert into a tooling system, match the chipbreaker and grade to the workpiece and machining stability: choose the chip control suited to interrupted or continuous cuts and confirm the holder accepts a TNMG 160408 form with a plate thickness of 4.76 mm. The double-sided construction provides economical edge rotation; where surface finish is critical, opt for stable clamping and appropriate feed and speed adjustments. Operators and process planners will benefit from verifying holder tolerance class and fastening compatibility before series production. For reliable high-speed turning of cast iron, specify the Tungaloy TNMG160408 T5105 via Metav Werkzeuge and contact the Metav technical team for holder matching and application advice; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data Article number: 6853016 Manufacturer SKU: TUN6853016 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Numbers / Core technical data Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 60° Clearance angle: 0° Special features / Versions Grade/coating: T5105, CVD-coated Chipbreaker: double-sided Hole: cylindrical hole for positive locating Shape: triangular, ISO TNMG form Application: turning of cast iron under stable conditions FAQ What materials is this insert designed to machine? The TNMG160408 T5105 is engineered primarily for cast iron machining; the CVD-coated cemented carbide grade T5105 provides abrasion resistance suited to high-speed cast iron cutting. How is the insert clamped in a holder? The triangular insert locates on the seat via its cylindrical hole and is clamped according to the holder’s form, tolerance and fastening method; compatibility depends on matching form, clearance angle and plate thickness. Can the insert be indexed to use multiple edges? Yes, the insert is double-sided, allowing rotation to fresh cutting edges and thereby extending the service life per insert in serial production. What does the 0.8 mm corner radius mean for finishing? A 0.8 mm corner radius offers increased edge strength with moderate roundness on the workpiece; it provides a balance between robustness and the achievable surface finish. Is the grade suitable for interrupted cuts? The T5105 grade is optimised for high-speed conditions and stable cutting. For heavily interrupted cuts, select a chipbreaker and holder configuration that prioritises edge strength and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5105 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T5105 with the triangular TNMG 160408 geometry and a 0.8 mm corner radius yields stable chip control and extended tool life for high-speed turning of cast iron; order the TNMG160408 T5105 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160408 T5105 – ISO turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) The TNMG160408 T5105 is an ISO-standard triangular turning insert engineered for high-speed turning of cast iron, featuring a double-sided chipbreaker and a cylindrical hole for secure mounting. ISO-standard triangular insert CVD-coated carbide grade T5105 0.8 mm corner radius for robustness Double-sided chipbreaker, cylindrical hole Increased productivity through controlled chip formation The combination of CVD-coated carbide and the T5105 wear grade is designed for high-speed machining of cast iron, providing predictable wear behaviour and reduced flank wear under stable cutting conditions. The triangular geometry with a 60° included angle and a 0.8 mm corner radius promotes a robust cutting edge that tolerates intermittent contact and vibrations better than sharper radii, which reduces part rejects and machine downtime. The double-sided chipbreaker assists in breaking long chips into manageable segments, improving process safety and facilitating swarf removal in automated production cells. Clear guidance on compatibility and secure clamping As an ISO-certified turning insert, compatibility with the toolholder depends on several geometric and tolerance parameters: form, clearance (fret) angle, tolerance class, fastening method, overall size and thickness. The insert’s cylindrical hole and 4.76 mm nominal thickness ensure repeatable seating and clamping in standard external holders and boring bars designed for TNMG-type inserts. For new setups, matching the holder’s pocket geometry to the insert’s form and the intended cutting conditions is essential to achieve the stated performance and to maintain stable cutting forces throughout the batch. Reliability and cost-efficiency in series production The T5105 grade’s CVD coating provides a hard, wear-resistant surface that extends flank life during prolonged runs, which translates into fewer indexings and lower total tooling cost per part. The triangular, double-sided design offers two usable cutting edges per side, effectively multiplying the number of cuts before disposal and improving overall tool economy. For manufacturers aiming to balance throughput and surface finish, the insert’s geometry and coating offer a compromise between aggressive material removal and consistent component quality, supporting process repeatability and reduced inspection effort. For high-speed cast iron turning where stable chip control and consistent tool life are required, request availability and tailored advice through Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930. Technical Data Article number: 6850288 Manufacturer SKU: TUN6850288 SKU: 6850288-Tungaloy Model series: ISO-Drehwendeschneidplatten WPL designation: TNMG160408 Facts Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Insert angle: 60° Clearance angle: 0° Special features Material: carbide Coating: CVD Grade: T5105 Application: turning; high-speed machining of cast iron Chipbreaker: double-sided Hole style: cylindrical hole Shape: triangular FAQ What materials is this insert suited for? The TNMG160408 T5105 is optimised for machining cast iron at high cutting speeds; the CVD coating and grade T5105 enhance wear resistance during such applications. How is compatibility with toolholders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG160408’s cylindrical hole and 4.76 mm thickness suit standard TNMG toolholder pockets. Can both sides of the insert be used? Yes, the double-sided chipbreaker design allows indexing to multiple cutting edges; this increases the number of usable edges per insert and improves tool economy. What benefit does the CVD coating provide? The CVD coating on the T5105 grade adds a hard wear layer that reduces flank wear and maintains cutting edge integrity, resulting in longer service life during continuous high-speed turning. Is the insert suitable for interrupted cuts? The triangular geometry and 0.8 mm corner radius provide a robust edge that manages occasional interruptions better than very small radii, though process stability remains a key factor. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5105 Wendeplatten - Tungaloy
Combining the CVD-coated T5105 grade with a 0.8 mm corner radius and a triangular ISO form, this insert provides wear resistance and consistent chip control for high-speed cast-iron turning; order the TNMG160408 T5105 directly via Metav Werkzeuge or consult our advisors for application support TNMG160408 T5105 Tungaloy turning insert The TNMG160408 T5105 is a triangular, CVD-coated carbide insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable cutting conditions CVD-coated carbide for high-speed turning Optimised for cast iron machining Double-sided chipbreaker for reliable performance ISO TNMG 160408 triangular insert, 0.8 mm radius Consistent chip control for reliable surface quality The CVD-coated grade T5105 combines a wear-resistant carbide substrate with a hard, thermally stable coating to reduce flank wear and prolong cutting life. The double-sided chipbreaker design promotes predictable chip formation, which simplifies swarf handling and helps maintain a steady cutting force. For machining cast iron, this results in improved surface finish and fewer interruptions, translating into more predictable cycle times and lower tool consumption. Accurate fit and straightforward mounting reduce setup time Compatibility with toolholders is determined by insert shape, tolerance class, mounting method and dimensions; the ISO TNMG 160408 form ensures a standardised interface with many external holders and boring bars. The insert features a cylindrical hole for secure fastening and a plate thickness of 4.76 mm, with an inscribed circle of 16 mm, enabling reliable clamping and repeatable positioning. The 0° clearance geometry and the 0.8 mm corner radius support stable contact with the workpiece and predictable wear patterns. Built for high-speed turning under stable conditions The combination of a technologically advanced coating and a robust carbide core makes this insert suitable for accelerated cutting regimes when rigidity and process stability are ensured. In such conditions, the grade offers high thermal resistance and consistent edge retention, which reduces the need for frequent index changes. That stability improves throughput and is particularly advantageous for batch production or continuous operations where process security is a priority. System-level benefits: inventory and process efficiency As part of an ISO-based system, this insert integrates with compatible holders, underplates, clamping sets and replacement screws, enabling straightforward replacement and simpler stock management. Using a standardised triangular indexable insert reduces the number of distinct toolholders required and keeps logistics lean. The result is a more economical tooling strategy with clear benefits in maintenance, reordering and documentation for production planning. For tailored advice on how the Tungaloy TNMG160408 T5105 can be integrated into existing tool systems, contact Metav Werkzeuge for application guidance and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850286 Manufacturer SKU: TUN6850286 Model series: ISO turning inserts Material: Carbide Coating / grade: T5105 (CVD-coated) Dimensions & core data Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 60° Features & compatibility Triangular insert, double-sided chipbreaker Cylindrical hole for screw clamping ISO TNMG 160408 form Application: external and internal turning Optimised for cast iron machining Intended for high-speed stable cutting conditions FAQ What materials is this insert best suited for? The TNMG160408 T5105 insert is optimised for cast iron and delivers consistent results when used under stable, high-speed turning conditions How is the insert mounted in a holder? Mounting is by a central screw through the cylindrical hole; the 4.76 mm plate thickness and ISO TNMG form ensure repeatable clamping and positioning Can the insert be used on internal turning operations? Yes, the triangular geometry and double-sided chipbreaker make it suitable for both external and internal turning applications What benefits does the T5105 coating provide? The CVD-coated T5105 grade increases wear resistance and thermal stability, improving edge life and enabling higher cutting speeds with consistent surface quality Is the insert indexable and reversible? The insert is double-sided and indexable, allowing multiple cutting edges per insert to reduce tooling costs and downtime Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5105 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, CVD-coated carbide grade engineered for high-speed cast-iron turning combined with consistent geometry and robust chip control for reliable series production. Order the inserts through Metav Werkzeuge or consult our advisors for application-matched recommendations. TNMG 160408 T5105 indexable turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius The TNMG 160408 T5105 is an ISO triangular indexable insert designed for high-speed external and internal turning of cast iron under stable machining conditions, providing controlled chips and repeatable part quality TNMG 160408 ISO triangular insert CVD-coated carbide grade T5105 0.8 mm corner radius for consistent profiles Double-sided chipbreaker, cylindrical hole Boosted productivity for cast-iron turning with optimised chip control The insert’s CVD-coated carbide composition (grade T5105) is designed for high-speed machining of cast iron where stability and thermal resistance matter. The coating improves wear resistance and maintains cutting-edge integrity over longer cycles, which reduces frequent index changes and increases useful cutting time. Paired with the double-sided chipbreaker, the geometry promotes predictable chip formation and evacuation, lowering interruption rates and helping to meet cycle-time targets in serial production. The result is a measurable improvement in machining efficiency and surface consistency for components produced from cast iron. Stable geometry for repeatable accuracy and easy edge management A well-defined corner radius of 0.8 mm and the triangle plate form ensure that profile radii remain consistent across index changes, supporting repeatable dimension control on turned parts. The insert comes with a cylindrical hole for secure locating and a standard 60° included angle that matches ISO holders, so seating accuracy and clamping stability are straightforward. The geometry reduces vibration sensitivity when the holder and machining setup are rigid, translating into improved tolerances and surface finish without complex parameter changes. Straightforward integration into ISO turning systems and recommended usage The part thickness of 4.76 mm and plate size 16 mm match common ISO tooling platforms, simplifying stocking and tool-change procedures across toolrooms. The design is double-sided, providing two usable cutting edges per index to extend life per insert. For best results, select a holder with compatible form, clearance angle, tolerance class and clamping method; combined selection determines overall performance. This insert is optimally used for turning operations on cast iron where stable cutting conditions can be maintained; under those conditions the insert grade achieves its intended balance of wear resistance and edge life. Contact Metav Werkzeuge for a tailored recommendation on Tungaloy inserts and to secure the TNMG 160408 T5105 for efficient cast-iron turning applications Technical Data Article number: 6850291 Manufacturer SKU: TUN6850291 SKU: 6850291-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Manufacturer article number: 6850291 Special features Grade T5105 CVD-coated carbide Double-sided chipbreaker Triangular plate form Cylindrical hole For turning of cast iron ISO indexable insert FAQ What materials is this insert intended for? The TNMG 160408 T5105 insert is intended primarily for the high-speed turning of cast iron; the T5105 grade provides wear resistance suited to that material. How many cutting edges are available per insert? The triangular, double-sided design offers two indexed cutting edges per side, enabling multiple repositions before replacement of the insert. Which holder characteristics must be matched to ensure compatibility? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and plate thickness; matching these parameters to the ISO specification ensures correct seating of the Tungaloy insert. Is the insert suitable for finishing or roughing operations? The T5105 grade with its CVD coating is optimised for stable high-speed machining, typically used for finishing and medium-depth cuts where good surface quality and tool life are required. What is the plate thickness and how does that affect performance? The plate thickness of 4.76 mm contributes to rigidity and resistance to edge chipping under stable clamping and supports consistent performance in production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5115 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade T5115 and a 0.8 mm corner radius for consistent edge life and reliable performance in cast‑iron turning. Order the insert via Metav Werkzeuge or consult our advisers for compatibility and holder selection. TNMG 160408 T5115 turning indexable insert (Tungaloy) The TNMG160408 T5115 is a CVD‑coated carbide indexable insert engineered for external and internal turning, offering a balance of wear resistance and cutting‑edge stability for cast iron applications. CVD-coated carbide grade T5115 0.8 mm corner radius for repeatable edges ISO TNMG 160408 triangle insert, 60° geometry Double-sided with cylindrical hole, 4.76 mm thick Optimised edge life and material compatibility The insert uses a CVD‑coated carbide substrate in the T5115 grade, designed as a universal solution for machining cast iron with a well‑balanced compromise between abrasion resistance and edge stability. The 0.8 mm corner radius reduces the risk of premature chipping while still permitting productive depths of cut for finishing and light roughing. For shops seeking predictable wear behaviour, this composition supports longer intervals between indexings and consistent surface quality on cast‑iron components. Straightforward integration with ISO toolholders Built to the ISO TNMG 160408 standard, the triangular geometry with 60° main angle and a cylindrical hole ensures compatibility with a wide range of external holders and boring bars when the correct form, clearance and tolerance class are observed. The insert’s 4.76 mm thickness and 0° relief are relevant when checking holder pocket fit and screw clamp engagement; these dimensions contribute directly to axial and radial rigidity during turning, which in turn affects finish and repeatability. Productivity through design and cost efficiency Being double‑sided, the insert provides economical use of the cutting edges and reduces tooling changes, which is advantageous for medium‑ to high‑volume production. The triangular TNMG shape gives three indexable positions and, combined with the T5115 grade, helps to maintain a stable cutting edge under varying cutting conditions. Selecting the appropriate chipbreaker variant and operating parameters will maximise tool life and reduce cycle times while preserving component tolerances. Practical selection and recommended use For best results in turning operations, pair the insert with a holder that matches the pocket form and tolerance class; choose a chipbreaker suited to the required surface finish and stability. The specification supports both external and internal turning tasks on cast iron; for mixed workpiece materials, consider toolpath and cooling strategies to protect the cutting edge. If further clarification on holder compatibility or application‑specific recommendations is needed, technical guidance is available to ensure the right insert and chipbreaker combination is selected. Contact Metav Werkzeuge for tailored advice on Tungaloy TNMG inserts and to confirm holder compatibility — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6850292 SKU: 6850292-Tungaloy Manufacturer SKU: TUN6850292 Model series: ISO turning indexable inserts Facts Geometry/designation: TNMG 160408 Inscribed circle/size: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° Main angle: 60° Double-sided: 2 usable edges Special features Material: carbide Coating: CVD coating Grade: T5115 Chipbreaker: double-sided Hole style: cylindrical hole Application: external and internal turning; suitable for cast iron ISO conformity: TNMG 160408 FAQ What materials is this insert suitable for? The TNMG160408 T5115 Tungaloy indexable insert is specified primarily for cast iron machining and delivers a balanced combination of wear resistance and edge stability for that material. How is the TNMG geometry beneficial in turning operations? The triangle TNMG 160408 shape provides three effective cutting positions; when combined with the 60° geometry and the 0.8 mm corner radius, the design supports versatile cutting strategies for finishing and light roughing. Does the insert require a specific holder type? Compatibility is determined by holder form, free angle, tolerance class, clamp method, size and thickness; use holders compatible with ISO TNMG 160408 geometry and the cylindrical hole for correct mounting. How many edges can be used before disposal? This double‑sided insert offers two usable edges per side, giving multiple indexings; proper selection of chipbreaker and cutting data will extend productive life. What is the exact product reference for ordering? Order using the product reference TNMG160408 T5115 (SKU 6850292‑Tungaloy) to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for edge stability, a 60° geometry for versatile turning and a double-sided chipbreaker for consistent chip control; order the inserts directly via Metav Werkzeuge or request advice from our consultants for optimal holder matching and fast supply. TNMG 160408 T5115 indexable turning insert for turning, CVD-coated carbide (Tungaloy) TNMG 160408 T5115 is an ISO-format triangular indexable insert designed for external and internal turning operations, offering a universal grade optimised for cast iron machining. CVD-coated carbide grade T5115 60° triangular insert, 16 mm size 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole Consistent chip control for stable production The combination of a double-sided chipbreaker and the CVD-coated carbide substrate provides predictable chip formation during continuous turning. This results in reduced interruptions for chip management and fewer tool changes, which directly improves cycle times. For production planners, the technical design reduces the need for complex parameter tuning: the insert's chipformer suits typical cast iron cutting conditions and maintains surface quality while limiting built-up edge. Robust edge stability for cast iron turning The T5115 grade, a CVD-coated carbide, balances wear resistance and edge toughness to withstand the abrasive nature of cast iron. The slightly rounded 0.8 mm corner radius provides stronger edge support than sharp corners, helping to avoid chipping on interrupted cuts. In practice this means longer tool life per index and a more consistent surface finish on parts where repeatability matters. Versatile geometry paired with secure clamping The 60° triangular geometry and the presence of a cylindrical hole ensure mechanical compatibility with a wide range of ISO holders. The insert thickness of 4.76 mm and the standardised form make selection and replacement straightforward; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Using standardised ISO insert systems simplifies tooling logistics and enables fast, secure clamping in both turning holders and boring bars. Practical explanation of key terms An indexable insert is a replaceable cutting element that can be rotated or flipped to use multiple cutting edges; this reduces the frequency of tool replacement compared with brazed tools. CVD coating (chemical vapour deposition) adds a hard, wear-resistant layer to the carbide substrate, improving resistance to abrasion at elevated temperatures. The result for workshop teams is fewer interventions, predictable tool life and a clear maintenance schedule. Contact Metav Werkzeuge for application-specific recommendations and immediate availability of the Tungaloy TNMG 160408 T5115 indexable inserts; technical consultation and fast delivery options are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850287 Manufacturer SKU: TUN6850287 Our SKU: 6850287-Tungaloy Model series: ISO-turning inserts Designation: TNMG160408 T5115 Core specifications Geometry angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T5115 (universal for cast iron) Shape: triangular, double-sided chipbreaker Application: external and internal turning Compatibility: ISO-standard inserts, fits matching holders and boring bars FAQ What materials is this insert suitable for? The TNMG 160408 T5115 insert is a universal grade optimised for cast iron; the T5115 CVD-coated carbide substrate also performs well under standard turning conditions where a balance of wear resistance and edge stability is required. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and reduces the risk of chipping on interrupted cuts, producing a more robust cutting edge and improving tool life compared with very fine radii. Can this insert be used in internal turning and boring bars? Yes, the ISO-format TNMG 160408 insert with a cylindrical hole and standard thickness is compatible with appropriately sized external holders and boring bars for internal turning, subject to correct holder selection. How many cutting edges are available per insert? The triangular, double-sided design allows multiple effective cutting edges per insert; the exact number depends on the indexable system orientation, but the geometry supports economical edge utilisation. Which Tungaloy product code identifies this insert? This item is listed as TNMG 160408 T5115 with manufacturer article number 6850287 and manufacturer SKU TUN6850287 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5115 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability with the universal T5115 grade for cast-iron turning and the stabilising 0.8 mm corner radius delivers reliable edge life and consistent productivity. Order the insert directly via Metav Werkzeuge or consult the team for application support. TNMG 160408 T5115 Turning insert by Tungaloy — ISO triangular indexable insert, CVD-coated carbide, 0.8 mm radius The TNMG160408 T5115 is an ISO triangular indexable turning insert designed for external and internal turning, offering a universal solution optimised for cast-iron applications. TNMG form, ISO 160408 specification CVD-coated carbide in T5115 universal grade 0.8 mm corner radius with cylindrical hole Reliable edge life for cast-iron turning The combination of a CVD-coated carbide substrate and the T5115 cutting grade provides a balanced mix of wear resistance and edge stability, especially for machining cast iron. This geometry and coating reduce flank wear under interrupted cuts and variable workpiece conditions, which leads to longer intervals between indexations and fewer tool changes. The neutral relief geometry helps preserve the cutting edge during tough engagement, while the universal grade minimises the need for multiple specialised inserts. Secure clamping and straightforward system integration Produced to ISO specifications, the insert ensures predictable compatibility with holders when form, relief angle, tolerance class, fastening method, size and thickness are matched. The ISO 160408 designation indicates a triangular form with a 60° included angle; the insert features a cylindrical hole for positive clamping and a standard thickness of 4.76 mm, enabling stable fixation in suitable external holders or boring bars. Typical system assembly comprises an indexable insert, a matched outer holder or boring bar, a shim/clamping set and replacement screws for safe, repeatable mounting. Productive machining through geometry and chip control A 0.8 mm corner radius provides a robust cutting edge that improves surface finish and reduces edge chipping during interrupted cuts, while the double-sided chipbreaker design allows economical use of both sides of the insert before replacement. The triangular form and 60° included angle deliver flexibility for a range of turning operations, and the moderate thickness increases rigidity for higher cutting forces. Together these features support steady material removal rates and contribute to consistent cycle times and lower per-part tooling costs. For precision cast-iron turning choose the Tungaloy TNMG160408 T5115 insert for robust performance—order via Metav Werkzeuge or contact their consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored machining advice Technical data Article number: 6853017 Manufacturer SKU: TUN6853017 SKU: 6853017-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Product name: TNMG160408 T5115 Tungaloy insert Core data Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 16 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating/type: CVD-coated carbide Grade: T5115 Application: Turning (external and internal) Chipbreaker: double-sided Plate form: triangular FAQ What materials is this insert best suited for? The Tungaloy TNMG160408 T5115 insert is a universal grade optimised for cast iron, offering balanced wear resistance and edge stability for typical grey and nodular cast-iron turning. Is the insert indexable and reversible? Yes. The triangular geometry with a double-sided chipbreaker allows indexation and use of multiple cutting edges, extending the service life before replacement. Which dimensions and geometry should be noted? Key dimensions are a 0.8 mm corner radius, 4.76 mm thickness and a 16 mm inscribed circle size, with a 60° included angle and a 0° relief angle; the insert is supplied with a cylindrical hole for clamping. How is compatibility with a holder determined? Compatibility depends on matching form, relief angle, tolerance class, fastening type, size and thickness; the system typically requires a compatible outer holder or boring bar plus shim and clamping screws. What benefits does the CVD coating deliver? The CVD-coated carbide provides enhanced wear resistance and improved edge life under cast-iron cutting conditions, leading to more consistent surface finish and reduced tool-change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5115 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that balances wear resistance and edge stability for efficient cast-iron turning; combine ISO conformity and a compact triangular form for predictable holder compatibility. Order directly via Metav Werkzeuge or consult our specialists for application matching. TNMG160408 T5115 TNMG indexable turning insert by Tungaloy — CVD-coated carbide, universal grade for cast iron TNMG160408 T5115 is a CVD-coated indexable turning insert designed for turning applications in cast iron; triangular geometry and ISO conformity ensure predictable mounting and repeatable performance CVD-coated carbide T5115 universal grade ISO TNMG 160408 triangular insert form Double-sided chipbreaker for stable cutting 0.8 mm corner radius for robust edge life Consistent wear resistance for stable production The combination of a CVD-coated surface and a hard carbide substrate delivers a reliable balance between wear protection and edge robustness. This leads to extended tool life under interrupted or continuous cuts and reduces the need for frequent indexing, improving overall machining uptime. The specified grade is optimised for cast iron, so the cutting edge maintains form while offering repeatable surface quality — a clear productivity advantage where process stability is key. Predictable fit and easy integration with ISO toolholders Produced to the ISO TNMG 160408 geometry, the insert matches the dimensional and form standards most commonly used in modern turning systems. Compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness, all reflected in the insert’s design. The triangular plate with a 0° relief and a cylindrical hole simplifies clamping checks and reduces setup time, enabling predictable seating and stable cutting forces for reproducible results in serial production. Effective chip control and improved surface reliability A double-sided chipbreaker combined with a 0.8 mm corner radius gives a controlled chip formation and consistent cutting action on external and internal turning tasks. The chipformer design reduces recutting and risk of built-up edge, which supports better surface finish and fewer interruptions. For operations prioritising throughput, this geometry helps to maintain tool life and dimensional accuracy, translating into steadier cycles and lower rework rates. Select Tungaloy’s TNMG160408 T5115 for robust cast-iron turning and contact Metav Werkzeuge for compatibility advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850289-Tungaloy Manufacturer SKU: TUN6850289 Manufacturer article number: 6850289 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T5115 (CVD-coated) Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Lead/approach angle: 60° Hole: with cylindrical hole Special features Triangular insert form Double-sided chipbreaker Universal grade optimised for cast iron Suitable for external and internal turning ISO TNMG 160408 geometry Compatible with standard ISO TNMG toolholders FAQ Is this insert suitable for cast-iron machining? Yes. The TNMG160408 T5115 insert uses a T5115 CVD-coated carbide grade specifically balanced for cast-iron applications, providing wear resistance and edge stability. Can the insert be used for both external and internal turning? Yes. The design and chipbreaker allow application in both external and internal turning operations, making the TNMG160408 T5115 versatile for workshop tasks. What does the double-sided chipbreaker mean in practice? A double-sided chipbreaker offers controlled chip formation on both indexed faces, extending usable edges and enhancing process reliability for the TNMG160408 T5115 insert. How does ISO conformity help in tool selection? ISO TNMG 160408 geometry ensures dimensional compatibility with standard holders; the insert’s form, size and thickness aid predictable clamping and repeatable set-up. What advantages does the 0.8 mm corner radius provide? A 0.8 mm radius gives a compromise between edge strength and finish capability, improving resistance to chipping while still permitting acceptable surface quality in many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5125 Wendeplatten - Tungaloy
Benefit from robust CVD-coated carbide and ISO compatibility for reliable machining of cast iron under interrupted conditions; these features support longer tool life and predictable process times. Order directly via Metav Werkzeuge or consult our experts for holder compatibility. TNMG 160408 T5125 TNMG Turning insert by Tungaloy — CVD-coated carbide, 60° The TNMG160408 T5125 Tungaloy insert is an ISO triangular turning insert designed for external and internal turning, optimised for interrupted cuts and less stable setups. CVD-coated carbide grade T5125 ISO triangular insert, 60° geometry 0.8 mm corner radius for robust cuts Double-sided chipbreaker with central hole Stable cutting in interrupted and less rigid conditions The combination of a CVD-coated surface with a wear-resistant carbide substrate provides enhanced resistance to thermal and mechanical loading during interrupted machining. This grade is formulated for applications in cast iron where chip formation can be unpredictable; the coating supports stable cutting forces and improved edge life. The direct benefit is fewer tool-indexing operations and more consistent part quality when machining discontinuous sections or unstable setups. Fast integration into ISO tool systems for predictable setups Standardised ISO geometry and the 60° triangular form ensure straightforward compatibility with common turning holders when form, relief angle, tolerance class, fastening and thickness match. The insert’s central cylindrical hole and prescribed plate thickness permit secure clamping and repeatable positioning, reducing setup time and minimising runout risks. This leads to higher process reliability and easier inventory handling for production environments that rely on ISO-indexable tooling. Controlled chip formation and reinforced cutting edge The double-sided chipbreaker design supports consistent chip control across a range of cutting conditions, while the 0.8 mm corner radius gives the cutting edge extra strength against impact and shock during interrupted cuts. Together, these features enable a balance between surface quality and robustness: stable chip evacuation reduces recutting, and the reinforced corner lowers the risk of premature edge chipping, which is particularly beneficial in less rigid assemblies. Practical application guidance for turning operations Intended for both external and internal turning, the insert performs best when paired with an appropriate holder and matched chipbreaker tailored to the workpiece material and stiffness of the setup. For cast iron applications and frequent interrupted cuts, the selected grade and chipbreaker promote reliable span formation and predictable tool life. When integrating into a system, confirm the holder’s relief angle and clamping method align with ISO specifications to maintain repeatable accuracy and secure fixation. Contact Metav Werkzeuge today for individual compatibility checks and application advice on the Tungaloy TNMG160408 T5125 turning insert — expert guidance is available by email or phone via Metav Werkzeuge. Technical data Article number: 6853018 Manufacturer SKU: TUN6853018 SKU: 6853018-Tungaloy Name: TNMG160408 T5125 Tungaloy-Wendeplatte Brand: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 60° Free angle: 0° Special features CVD-coated carbide Grade T5125 Double-sided chipbreaker Cylindrical hole Triangular ISO insert Suitable for external and internal turning Optimised for cast iron and interrupted cuts FAQ What materials is this insert suitable for? The TNMG160408 T5125 insert is formulated for machining cast iron and performs well under interrupted cutting conditions due to its CVD-coated carbide grade. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and thickness; the ISO triangular design of the TNMG160408 supports standard ISO tool systems when these parameters match. How does the chipbreaker affect performance? The double-sided chipbreaker on the TNMG160408 promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of recutting in interrupted operations. Does the insert offer reinforced edge strength for roughing tasks? The 0.8 mm corner radius increases edge robustness, making the TNMG160408 more resistant to impact and suitable for less stable machining conditions. How is the insert fixed to the toolholder? The TNMG160408 features a central cylindrical hole for secure clamping; correct matching of holder type and fastening hardware ensures repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, a tougher CVD-coated carbide grade, and secure ISO clamping for consistent turning results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 T5125 – ISO indexable turning insert, CVD-coated carbide, triangular 60° geometry, Tungaloy A TNMG160408 T5125 is an ISO-indexed triangular insert intended for external and internal turning, optimised for interrupted cuts and less stable setups where a tougher grade improves productivity TNMG160408 geometry for ISO turning CVD-coated carbide grade T5125 0.8 mm corner radius for versatile profiles Cylindrical hole with screw clamping Reliable cutting performance for interrupted turning The combination of a CVD-coated carbide substrate and the T5125 grade provides a tougher cutting edge suited to interrupted cuts and variable rigidity. This construction promotes stable chip formation and longer tool life, which reduces downtime and tool-change frequency. The 0.8 mm corner radius supports versatile profile generation and contributes to an even wear pattern, helping to maintain consistent surface quality on cast iron components under demanding conditions. Engineered for ISO compatibility and secure clamping Compatibility with toolholders depends on geometry, relief angle, tolerance class, fastening and insert thickness; this insert features a triangular 60° geometry, 0° relief angle and a cylindrical hole for screw clamping, enabling predictable mounting in ISO indexable systems. The insert thickness of 4.76 mm and 16 mm size are industry-standard dimensions that simplify replacement and inventory management. System components typically include a matching external holder or boring bar, a precision shim or clamp set and replacement screws for secure retention. Application guidance that improves throughput and reliability Designed primarily for turning, the insert performs well in both external and internal operations where interrupted engagement or less stable set-ups occur. Select a matching chipbreaker and the T5125 sort for cast iron machining to balance wear resistance and toughness; the double-sided chipbreaker offers two cutting edges per indexation cycle, improving economy per insert. The material choice—carbide with CVD layering—helps achieve a favourable mix of edge strength and thermal resistance, resulting in reproducible process windows and fewer unexpected stops for tool changes. For machining enquiries regarding Tungaloy's TNMG160408 T5125 insert or to place an order through Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt technical guidance and availability Technical data Article number: 6850290 Manufacturer SKU: TUN6850290 Merchant SKU: 6850290-Tungaloy Item name: TNMG160408 T5125 Tungaloy indexable insert Model series: ISO indexable turning inserts Facts Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Relief angle: 0° Geometry angle: 60° Mounting: with hole Hole style: cylindrical hole Special features Material: carbide Coating/sort: T5125, CVD-coated Chipbreaker: double-sided Shape: triangular Typical application: turning (external and internal) Optimal use: interrupted cuts and less stable conditions System components: holder, shim/clamp set, replacement screws Compatibility factors: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert suitable for? The TNMG160408 T5125 insert is a carbide indexable insert with a CVD-coated T5125 grade, recommended primarily for cast iron and similar materials, especially under interrupted cutting conditions. How does the T5125 grade affect tool life? The T5125 sort is designed for increased toughness; in practical terms, the TNMG160408 T5125 shows improved resistance to chipping in interrupted cuts, which often translates to longer tool life and fewer unscheduled tool changes. Is the insert compatible with standard ISO toolholders? Compatibility requires matching the insert form, relief angle, tolerance class, fastening method, size and thickness; the TNMG160408 conforms to ISO indexable dimensions and uses a cylindrical hole for screw clamping to enable predictable mounting in ISO holders. Can this insert be used for internal boring as well as external turning? Yes, the insert is suitable for both external and internal turning operations; selecting an appropriate holder and chipbreaker ensures stability and surface finish consistency. How many cutting edges are available per indexation? The triangular TNMG insert is double-sided with a double-sided chipbreaker, offering multiple indexable cutting edges to improve cost efficiency per insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T5125 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade and a double-sided chipbreaker, this insert provides robust chip control and extended tool life for interrupted turning operations. Its ISO-compatible TNMG geometry and 0.8 mm corner radius make it a pragmatic choice where stability is limited; order via Metav Werkzeuge or consult the technical team for selection support. TNMG160408 T5125 TNMG indexable turning insert by Tungaloy — CVD-coated carbide, 60° triangular The TNMG160408 T5125 is an ISO-format triangular insert designed for general external and internal turning, offering enhanced chip control and a tougher grade for cast-iron work under interrupted cuts TNMG 160408 geometry, 60° included angle CVD-coated carbide grade T5125 for cast iron Double-sided chipbreaker for reliable chip control Triangular insert with 0.8 mm corner radius Reliable chip control for interrupted turning The combination of a CVD-coated carbide substrate and a double-sided chipbreaker yields consistent chip formation even in less rigid setups. The coating improves resistance to built-up edge and flank wear, while the chipbreaker directs swarf away from the cutting edge, reducing re-cutting. This results in more stable cutting forces and a measurable improvement in surface finish on interrupted profiles. For production contexts where repeatability matters, the insert’s design reduces downtime related to chip jams and frequent edge changes. ISO compatibility and rapid changeover for uptime Designed to conform to ISO dimensions, the insert fits standard TNMG toolholders when matched by form, clearance angle and tolerance class. The 60° triangular shape provides three usable edges per side when indexed, increasing effective life per insert. Key dimensions such as the 0.8 mm corner radius and 4.76 mm plate thickness ensure predictable engagement with the workpiece and compatible clamping in the holder. The central cylindrical hole supports secure fastening with standard screws and shims, enabling quick index-and-go changeovers on the shop floor and helping to maintain production flow. Tougher grade for cast iron and unstable conditions Grade T5125 is a tougher, CVD-coated composition optimised for machining cast iron under interrupted cutting or where rigidity is limited. The material pairing reduces edge chipping and improves resistance against mechanical shock, so the cutting edge remains reliable on part features such as interrupted grooves or cross-holes. Where finishing demands are moderate and component geometry imposes force variations, this grade provides a balance between wear resistance and fracture toughness that supports longer tool life and fewer unplanned tool changes. System setup and selection guidance for predictable results A productive setup comprises the insert, a matching external holder or boring bar, a compatible shim/clamp set and spare fastening screws. Selection of the correct chipbreaker and the T5125 grade should be driven by workpiece material, type of cut (continuous versus interrupted) and machine–fixture rigidity. Technical advisors can assist with matching insert geometry and holder clamping to application-specific parameters, ensuring the solution delivers the intended efficiency gains and surface quality. For interrupted turning tasks where chip control and edge robustness are essential, specify Tungaloy’s TNMG160408 T5125 inserts via Metav Werkzeuge; for application matching and rapid supply contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850293 SKU: 6850293-Tungaloy Manufacturer SKU: TUN6850293 Brand: Tungaloy Model series: ISO turning inserts ISO designation: TNMG160408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Grade: T5125 Coating: CVD-coated carbide Chipbreaker: double-sided Shape: triangular Application: turning (external and internal) Compatibility: ISO-format holders; selection based on form, clearance angle, tolerance, attachment, size and thickness FAQ What material is the TNMG160408 T5125 best suited for? The TNMG160408 T5125 is formulated for machining cast iron and performs well in interrupted cuts or less rigid setups, thanks to its tougher T5125 CVD-coated carbide grade. How many cutting edges are available per insert index? The triangular TNMG geometry provides multiple usable edges per index; the TNMG160408 format allows indexing to present fresh cutting edges as required. Which holder features are necessary for correct compatibility? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the chosen external holder or boring bar. Is this insert suitable for finishing passes? While the T5125 grade emphasises toughness for interrupted cutting and cast iron, surface finish will benefit from appropriate feed and speed settings; the chipbreaker supports controlled swarf evacuation to aid finish. What components are included in the system for mounting the insert? A full setup typically comprises the insert, a matching holder or boring bar, a shim/clamp set and replacement screws to secure the insert in the tool assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a double-sided chipbreaker and ISO-standard geometry for consistent, economical turning cycles; order the insert directly via Metav Werkzeuge or consult the Metav advisors for holder compatibility and process integration. TNMG160408 T515 — ISO turning insert for economical cast-iron machining (Tungaloy) A TNMG160408 T515 triangular ISO insert designed for standard turning operations, optimised for efficient machining of cast iron with dependable chip control. ISO TNMG 160408 format, triangular 16 mm CVD-coated carbide grade T515 for cast iron Double-sided chipbreaker, cylindrical hole design Proven material and coating for efficient chip control The insert is manufactured from cemented carbide with a CVD-coated surface layer in grade T515, offering a balance between wear resistance and economical use in high-volume turning of cast iron. The coating reduces initial crater wear and helps maintain cutting-edge geometry over extended tool life, which in practical terms means fewer insert changes and predictable replacement intervals. The design supports stable chip formation, reducing downtime for chip clearing and improving process reliability in repetitive production environments. Geometry and holder compatibility that simplify integration Featuring a triangular 16 mm form with a 60° included angle and a 0.8 mm corner radius, this ISO-format insert matches common indexable toolholders when the holder selection aligns with the insert’s form, clearance angle, tolerance class, fastening method, size and 4.76 mm thickness. The cylindrical hole and double-sided chipbreaker allow the insert to be indexed for renewed cutting edges, maximising usable life per part. Compatibility depends on a correct match of dimensions and mounting; the insert’s ISO designation enables straightforward comparison and selection of suitable holders and clamping sets. Practical guidance for process setup and application Designed for turning (external and internal), the insert performs best when chipbreaker geometry, grade and cutting parameters are chosen to match the workpiece, stability and the presence of interrupted cuts. The double-sided chipbreaker supports controlled chip segmentation and evacuation, which is particularly useful during medium to heavy interrupted cuts in cast iron. Selecting appropriate cutting speeds and feeds will extend edge life; for shorter, high-efficiency cycles the grade’s balance of toughness and wear resistance helps secure consistent surface finish and dimensional stability. Reliable production benefits and application certainty Using an ISO-standard insert with the described features contributes to predictable tool behaviour and simplified inventory management. The combination of T515 grade and a CVD-coated surface promotes economic machining through good tool life and repeatable results; the triangular geometry with an indexable design reduces tooling costs per edge. For production planners this translates into stable cycle times, fewer unscheduled tool changes and clearer maintenance intervals, supporting continuous, efficient turning operations. For original Tungaloy TNMG160408 T515 inserts and tailored advice on holder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for precise technical support and prompt supply arrangements Technical data Article number: 6743368 Manufacturer SKU: TUN6743368 SKU: 6743368-Tungaloy Series: ISO turning indexable inserts ISO designation: 160408 Grade: T515 Material: Cemented carbide Coating: CVD-coated Geometry: triangular Size: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert intended for? The TNMG160408 T515 is designed primarily for economical machining of cast iron, using its T515 carbide grade and CVD-coated surface to balance wear resistance and toughness. How does the chipbreaker affect performance? The double-sided chipbreaker promotes controlled chip segmentation and evacuation, improving process stability and reducing the risk of chip-related interruptions during turning. Can the insert be indexed or reversed? Yes, the triangular shape with a cylindrical hole and double-sided design allows indexing to access fresh cutting edges, maximising the number of usable edges per insert. What determines compatibility with a toolholder? Compatibility is set by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct cutting geometry. Is the insert suitable for interrupted cuts? The T515 grade and chipbreaker design make the insert suitable for interrupted cuts in cast iron, provided the cutting parameters and clamping stability are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T515 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T515 and a robust triangular geometry for efficient, repeatable machining of cast iron; order the inserts directly via Metav Werkzeuge or consult our advisers for holder compatibility and process parameters. TNMG160408 T515 turning insert by Tungaloy — triangular ISO 160408 for turning The TNMG160408 T515 is a triangular, ISO‑standard indexable insert designed for general external and internal turning operations, particularly optimised for economical machining of cast iron. CVD-coated carbide T515 for cast iron Triangular shape with cylindrical hole Double-sided chipbreaker for versatile use 0.8 mm corner radius and 0° clearance Higher material removal rates with controlled chip formation The CVD-coated T515 grade combines a wear-resistant surface with substrate strength typical of carbide, enabling higher cutting speeds and stable performance when machining cast iron. This insert is designed to deliver consistent cutting forces and predictable tool life; the double-sided chipbreaker helps control chips in continuous and lightly interrupted cuts, which reduces downtime for chip management and increases component throughput. In practical terms, the result is an optimised balance between productivity and consumable costs. Simple integration: secure clamping and ISO compatibility As an ISO 160408 insert, the geometry and dimensions are standardised to fit compatible external holders and boring bars. The triangular form and cylindrical hole permit secure clamping and quick indexation, while the 0° clearance specification must be matched by the chosen holder and tool geometry to ensure correct rake and contact. Compatibility is determined by insert form, relief angle, tolerance class, attachment method, size and thickness; the modular system makes replacement and set‑up straightforward in series production. Robustness and surface quality for reliable results With a 0.8 mm corner radius, the design provides a compromise between edge strength and achievable surface finish: larger corner radii increase stability and tool life, while still allowing acceptable roughness on standard cast‑iron components. The carbide substrate with CVD coating resists built‑up edge and abrasive wear common in grey and nodular cast iron, so process windows remain stable over longer intervals. Double‑sided usage halves the cost per usable edge, supporting economic, repeatable machining in high‑volume environments. For tailored recommendations on holders, cutting data and fast supply of Tungaloy TNMG160408 T515 inserts, contact Metav Werkzeuge for application advice and immediate availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6733835 Manufacturer SKU: TUN6733835 Vendor SKU: 6733835-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts ISO designation: 160408 Insert size: 16 Included angle: 60° Corner radius: 0.8 mm Clearance angle: 0° Hole style: Cylindrical hole Special features Material: carbide Coating: CVD-coated Chipbreaker: double-sided Shape: triangular Grade: T515 Suitable for: cast iron machining FAQ What materials is this insert best suited for? The TNMG160408 T515 insert is optimised for machining cast iron; the T515 grade and CVD coating provide wear resistance and chip control tailored to grey and nodular cast irons. Can the insert be used on both external and internal turning operations? Yes, the triangular shape and standard ISO dimensions allow use in compatible external holders and boring bars for internal turning, provided holder geometry matches the 0° clearance requirement. How does the corner radius affect performance? A 0.8 mm corner radius increases edge strength and enhances tool life while still delivering acceptable surface finish for many roughing and semi-finishing tasks in cast‑iron turning. Is the insert reversible and how many cutting edges are available? The insert features a double-sided chipbreaker, allowing rotation to a fresh edge; this design effectively increases the number of usable edges and improves cost efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T515 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for economical cast-iron turning, combined with a robust 60° triangular geometry and a 0.8 mm corner radius for stable cutting and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. TNMG 160408 T515 TNMG turning insert for turning, CVD-coated carbide by Tungaloy A TNMG160408 T515 indexable insert engineered for efficient external and internal turning, optimised for cast iron with a double-sided chipbreaker. CVD-coated carbide grade T515 Optimised for economical cast iron turning 60° triangular insert with 0.8 mm radius Double-sided chipbreaker, with cylindrical hole High-efficiency turning with controlled chip formation The combination of a CVD-coated carbide substrate and the T515 grade provides a balance between tool life and cost-efficiency for cast-iron applications. The coating enhances wear resistance at typical cutting speeds for cast iron, while the substrate maintains toughness during interrupted cuts. Because the insert features a double-sided chipbreaker, chip control is consistent across a range of feeds, which reduces cycle times and minimises secondary operations. This makes the insert particularly suitable for production environments where predictable performance and low tooling costs are priorities. Stable geometry that supports consistent surface finish The 60° triangular geometry and 0.8 mm corner radius contribute to a stable cutting edge that resists deformation under load. A larger corner radius improves tool strength and can deliver better surface quality when process parameters are stable; conversely, the modest radius still allows for effective finishing passes where required. The 4.76 mm thickness adds rigidity to the cutting edge, reducing vibration in less rigid setups and supporting repeatable dimensional results. These geometric attributes are especially beneficial when machining cast iron components that demand both productivity and repeatable surface integrity. Practical system compatibility and selection guidance Compatibility with toolholders is determined by form, relief angle, tolerance class, clamping method, size and thickness, so matching the insert profile to the holder is essential. The insert carries a cylindrical hole for secure clamping and is part of an ISO turning insert system; this simplifies replacement and inventory management across standard holders. Select the chipbreaker and grade according to workpiece stability and the nature of the cut — continuous cuts benefit from smoother chip flows, while interrupted cuts require a tougher edge. For complex applications or mixed-batch production, advisers at Metav Werkzeuge can recommend the best holder–insert combination and process parameters. For tailored application advice or to request genuine Tungaloy TNMG160408 T515 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical data Article number: 6733838 SKU: 6733838-Tungaloy Manufacturer SKU: TUN6733838 Designation: TNMG160408 T515 Series: ISO-Drehwendeschneidplatten Material: carbide Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Grade: T515 Coating: CVD-coated carbide Shape: triangular Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Typical system: ISO turning insert with compatible holder and clamp FAQ What materials is this insert optimised for? The TNMG160408 T515 is optimised for economical machining of cast iron, using its CVD-coated carbide grade to combine wear resistance with toughness for typical turning operations. How does the corner radius affect cutting results? A 0.8 mm corner radius increases edge strength and promotes a consistent surface finish in stable cutting conditions; the radius is a compromise between robustness and the ability to produce finer finishes. Is the insert compatible with standard ISO holders? The insert follows ISO specifications for turning inserts; compatibility depends on holder form, tolerance and clamping — matching these parameters ensures correct seating and secure clamping. What purpose does the double-sided chipbreaker serve? The double-sided chipbreaker maintains effective chip control across both indexed orientations, extending usable life per insert and aiding continuous production runs with reduced manual intervention. Which coating and substrate are used on the insert? The insert uses a CVD-coated carbide substrate in the T515 grade, offering a balance of wear resistance and toughness suited to cast-iron turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, ISO conformity and a double-sided chipbreaker to ensure consistent machining of stainless steels and economical tool change cycles; order directly via Metav Werkzeuge or consult the technical team for application matching. TNMG 160408 T6215 indexable turning insert — Tungaloy, CVD-coated carbide for stainless steels, ISO turning application TNMG160408 T6215 is an indexable turning insert designed for external and internal turning in stainless steels, offering robust wear resistance under stable to slightly interrupted cuts ISO-compliant triangular insert with 60° geometry CVD-coated carbide grade T6215 for rostfreier Stahl Double-sided chipbreaker for extended edge life 0.8 mm corner radius for improved strength Reliable performance for stainless-steel turning operations The CVD-coated carbide grade T6215 delivers reliable wear resistance in the machining of rostfreier Stahl, which reduces unscheduled tool changes and improves process uptime. With a grade formulated for stable to lightly interrupted cuts, operators achieve consistent surface quality and predictable flank wear. The coating technology provides a thermal and abrasive barrier that helps maintain edge integrity during extended cycles, so machining windows remain stable over time. Fast changeover and assured holder compatibility Designed to the ISO turning insert series, the geometry and dimensions guarantee compatibility with standard turning holders when matched by form, relief angle, tolerance class, fixing method, size and thickness. The triangular form with a 60° included angle and a cylindrical hole permits secure clamping and straightforward indexing, supporting quick changeovers and reduced fixture time. This results in smoother shop-floor logistics and shorter machine downtime when inserts are rotated or replaced. Controlled chip formation and process stability A double-sided chipbreaker tailored for this grade promotes predictable chip control when turning ductile or work‑hardening stainless steels, aiding safe evacuation and minimising rework. The 0.8 mm corner radius offers a compromise between edge strength and dimensional capability, supporting both finishing and light turning passes while reducing the risk of premature chipping under moderate radial engagement. Practical build and dimensional clarity for reliable setup With a plate thickness of 4.76 mm and a nominal plate size of 16, the insert provides the rigidity needed for stable cutting. The indexable insert concept with two usable cutting faces per side extends the effective number of edges, which helps lower tooling costs per produced component. The standardised ISO code and clear mechanical values simplify ordering and inventory management across production lines. Discuss suitability and application options with Metav Werkzeuge — our specialists can advise on clamping, holder matching and process parameters for the Tungaloy TNMG 160408 T6215 insert; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to align the insert to specific turning tasks Technical Data Manufacturer article number: 6944819 SKU: 6944819-Tungaloy Manufacturer SKU: TUN6944819 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & measurable data Plate size: 16 Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief/clearance angle: 0° Hole style: cylindrical hole Materials & features Material: carbide Coating / grade: T6215 (CVD-coated carbide) Insert form: triangular Chipbreaker: double-sided Application: turning (external and internal) ISO designation: TNMG160408 FAQ Is this insert suitable for machining stainless steel? Yes. The TNMG 160408 T6215 is a CVD-coated carbide indexable insert from Tungaloy optimised for machining rostfreier Stahl in stable to slightly interrupted conditions. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker on the TNMG 160408 helps control chips and distribute cutting loads, which contributes to longer edge life and more predictable wear patterns on the Tungaloy insert. What dimensions and geometry are relevant for holder compatibility? Compatibility depends on form, relief angle, tolerance class, fixing, size and thickness; this insert has a 16 nominal size, 4.76 mm thickness and a 60° geometry (TNMG160408) to match standard ISO turning holders. Can the insert be used for finishing and roughing? The 0.8 mm corner radius and CVD-coated T6215 grade suit finishing and light to moderate turning; for heavier roughing, consider a grade and geometry selected specifically for high material removal rates. What identifiers should be used when ordering or specifying replacements? Order using the ISO designation TNMG160408, grade T6215, manufacturer article number 6944819 or SKU 6944819-Tungaloy to ensure the correct Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 and a double-sided chipbreaker for reliable, extended performance when turning stainless steels; order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160408 T6215 TNMG – Turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) The TNMG160408 T6215 is an ISO triangular turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steels Double-sided chipbreaker design Triangle insert with 0.8 mm corner radius Increased tool life and consistent cutting performance The CVD‑coated carbide grade T6215 provides enhanced wear resistance, which translates into longer intervals between indexings and fewer tool changes. For turning operations that prioritise uptime and reproducible results, this coating reduces flank and crater wear under elevated temperatures typical for machining stainless steels, therefore improving process stability. The result is a measurable improvement in productivity and lower overall tooling consumption when compared with uncoated or less heat-resistant grades. Reliable fit and simple integration into ISO tooling systems Provided as an ISO‑standard triangular insert with a cylindrical locating hole and a 0° relief angle, this insert fits conventional holders when form, relief angle, tolerance class, clamping and thickness correspond. The standardised geometry supports quick replacement and predictable positioning, reducing setup time and the risk of incorrect seating. Clear adherence to ISO dimensions ensures compatibility across a range of external holders and boring bars, which helps maintain consistent cutting conditions and surface finish across assemblies. Better chip control and surface finish for demanding materials The double-sided chipbreaker is engineered to control chip formation when machining stainless steels, lowering heat concentration at the cutting edge and reducing the likelihood of built-up edge formation. Effective chip control improves coolant access and evacuation, which in turn aids in maintaining a uniform surface quality. Choosing this chipbreaker and the T6215 grade together offers a balance between robustness and surface integrity, particularly useful in applications where rework must be minimised. Practical guidance for application and set-up For best results during turning, ensure a stable clamping arrangement and select a holder that matches the insert thickness of 4.76 mm and the insert seat geometry. The 0.8 mm corner radius gives a compromise between strength and edge definition; use it where moderate feed rates and good finish are required. The insert is suitable for both external and internal turning; however, in highly interrupted cuts or when machining very hard or abrasive workpieces, consider a more shock‑resistant grade or altered cutting parameters to preserve edge life and avoid premature chipping. For tailored advice on compatibility, tooling strategies or to confirm suitability for a specific turning task, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and ordering assistance. Technical data Manufacturer article number: 6944892 Manufacturer SKU: TUN6944892 SKU: 6944892-Tungaloy Designation: TNMG160408 Dimensions & angles Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting edge angle: 60° Hole style: cylindrical hole Insert shape: triangular Coating & special features Coating: CVD‑coated carbide, grade T6215 Chipbreaker: double-sided Material base: carbide Typical application: turning (external and internal) Intended for: stainless steels under stable to lightly interrupted conditions FAQ What materials is this insert best suited for? The TNMG160408 T6215 insert is optimised for machining stainless steels, offering improved wear resistance and process reliability under stable to lightly interrupted cutting conditions. How does the T6215 coating benefit everyday turning operations? The CVD‑coated T6215 grade increases thermal and abrasive wear resistance, which extends tool life and supports consistent cutting performance in the Tungaloy turning insert. Which holders are compatible with this insert? Compatibility depends on adherence to ISO seat form, relief angle, tolerance class, clamping method and insert thickness; the triangular ISO form and cylindrical hole of this insert match standard ISO external holders and boring bars when dimensions correspond. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius offers a balance between edge strength and surface finish, making it suitable for moderate feeds where good surface quality is required without sacrificing robustness. Is this insert reversible or indexable? Yes, the triangular shape with double-sided geometry allows indexing to multiple cutting edges, enabling economical use of the insert before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability, the ISO TNMG 160408 format and a 0.8 mm corner radius provides reliable, repeatable results for turning stainless steel; order the TNMG160408 T6215 directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160408 T6215 — Tungaloy indexable insert for Turning, CVD‑coated carbide, 0.8 mm radius The TNMG 160408 T6215 is an ISO‑format, triangular indexable insert designed for productive external and internal turning of stainless steel under stable to mildly interrupted cutting conditions. CVD-coated carbide for stainless steel ISO TNMG 160408 format 0.8 mm corner radius Double-sided chipbreaker with hole Outstanding wear resistance for consistent production The combination of a CVD‑coated carbide substrate and the T6215 grade delivers high wear resistance and stable cutting edges when machining stainless steel. This material pairing is optimised for extended tool life under continuous operation, which reduces changeovers and improves uptime. The coating acts as a thermal and chemical barrier, slowing flank wear and maintaining edge geometry; as a result, cycle times can be shorter and component tolerances are easier to hold, offering a clear efficiency advantage in series production. Precision geometry that simplifies holder selection and setup The insert follows the ISO TNMG 160408 geometry with a 60° included angle and a 0.8 mm corner radius, together with a plate thickness of 4.76 mm and a 16 mm inscribed circle. The design includes a cylindrical centre hole and a double‑sided chipbreaker, allowing the insert to be indexed and turned over to use both cutting edges. Compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching the insert to a suitable external holder or boring bar, plus the correct shim/clamp set and replacement screws, ensures secure clamping and repeatable positioning. Chip control and process stability for improved surface quality The double‑sided chipbreaker is tailored for turning operations where chip formation and evacuation are decisive for surface finish and tool life. Selecting a chipbreaker and grade based on workpiece material, machining parameters and component stability reduces the risk of built‑up edge and erratic chip flow. For short, interrupted cuts the robust cutting edge of this insert sustains performance; in continuous cuts it helps achieve consistent surface quality. Practical system components—insert, holder, underlay and fastenings—work together to maintain process reliability and predictable results. Secure process reliability with Tungaloy CVD‑coated inserts — contact Metav Werkzeuge for tailored application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6876075-Tungaloy Manufacturer SKU: TUN6876075 Manufacturer item number: 6876075 Model series: ISO indexable turning inserts Product name: TNMG160408 T6215 Tungaloy insert Numbers / Core data Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Clearance angle: 0° Designs / Special features Carbide substrate, CVD coating (grade T6215) Triangular plate, double‑sided chipbreaker Centre: cylindrical hole ISO designation: TNMG160408 Application: turning (external and internal) System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The TNMG160408 T6215 insert is optimised for stainless steel machining; the CVD‑coated carbide grade provides wear resistance and edge stability for that material group. How is the insert mounted and indexed? The insert is secured via its cylindrical centre hole and clamping system; it is double‑sided so both edges can be indexed for extended tool life. Which geometry parameters are most important for holder compatibility? Holder compatibility depends on form, clearance angle (0° for this insert), tolerance class, fastening method, size (16 mm inscribed circle) and plate thickness (4.76 mm). Can the chipbreaker handle interrupted cuts? Yes; the robust edge and chipbreaker design are suitable for stable to slightly interrupted cutting conditions, delivering consistent chip control and surface quality. What system components should be checked before turning? Verify the external holder or boring bar, the shim/clamp set, and replacement screws for dimensional match and clamping integrity to ensure process repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com