TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 carbide grade and the robust 0.8 mm corner radius to achieve consistent, wear-resistant performance when turning stainless steels; order directly or consult Metav Werkzeuge for application advice. TNMG160408 T6215 triangular ISO turning insert by Tungaloy — CVD-coated carbide, 60° cutting angle The TNMG160408 T6215 is an ISO-format triangular turning insert designed for external and internal turning, optimised for stainless steels under stable to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 Triangular ISO plate, 60° cutting angle 0.8 mm corner radius for sturdy edges Double-sided chipbreaker with cylindrical hole Durable wear resistance for reliable cycle times The CVD-coated carbide grade T6215 combines a hard coating with a tough substrate to deliver sustained wear resistance on stainless steels. This composition reduces flank and crater wear, extending effective tool life and supporting steady production runs. The 0.8 mm corner radius promotes edge strength, making the insert less prone to chipping during moderate interruptions, while the 60° geometry offers a balance between clearance and cutting width. These factors translate into fewer tool changes and improved machine uptime. Easy integration into ISO turning systems As an ISO-standard insert, compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG160408 fits standard triangular pockets and is retained via its cylindrical centre hole. The insert's 4.76 mm thickness and 16 mm inscribed circle are matched to common holders and boring bars, and the double-sided chipbreaker design allows indexed use of both cutting edges. For practical assembly, the system typically comprises the insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws — ensuring predictable clamping stability and repeatable positioning. Practical advantages for shop-floor productivity Used for both external and internal turning, the insert supports a range of stainless-steel machining tasks where surface finish and process security matter. Selecting the appropriate chipbreaker and the T6215 grade helps control built-up edge formation and chip flow, improving surface quality and reducing rework. The insert's balanced geometry provides reliable cutting performance across conventional and CNC lathes, contributing to consistent part tolerances and lower per-part tooling cost in volume production. Contact Metav Werkzeuge for tailored cutting data, application recommendations and ordering for Tungaloy inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944882 SKU: 6944882-Tungaloy Manufacturer SKU: TUN6944882 Facts Insert designation: TNMG160408 Grade / coating: T6215 (CVD-coated carbide) Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Hole style: cylindrical Special features Triangular insert, double-sided Centre hole for positive retention Suitable for turning (external and internal) Recommended for stainless steels under stable to slightly interrupted conditions System: insert plus matching holder, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The TNMG160408 T6215 insert is formulated for stainless steels, offering improved wear resistance and chip control when machining such materials. Can the insert be used on both external and internal turning operations? Yes. The triangular geometry and cylindrical hole allow use in both external holders and appropriate boring bars for internal turning with the TNMG160408 Tungaloy insert. How does the T6215 grade affect tool life? The T6215 CVD coating increases abrasion resistance and reduces flank wear, which typically leads to longer tool life compared with uncoated grades in comparable stainless-steel applications. Is the insert indexable and double-sided? Yes. The insert is double-sided with a chipbreaker on each usable edge, enabling indexable use and efficient edge changes to maximise productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
A cost-effective, ISO-standard indexable turning insert that combines CVD-coated carbide wear resistance with a 0.8 mm corner radius for reliable stainless-steel machining; order directly via Metav Werkzeuge or request application advice from our consultants. TNMG160408 T6215 Tungaloy indexable turning insert — 60° triangular form, CVD-coated carbide A TNMG160408 Tungaloy insert designed for ISO-standard turning tasks, optimised for external and internal turning of stainless steels under stable to lightly interrupted conditions. ISO-standard triangular insert, 60° geometry CVD-coated carbide for wear resistance 0.8 mm corner radius for versatile profiles Suitable for stainless steel machining Consistent machining performance for stainless-steel turning The insert delivers stable cutting when machining rostfreier Stahl, thanks to the T6215 CVD coating that enhances wear resistance and edge life. In practical terms, this means fewer insert changes and more continuous runtime on medium-duty turning operations. The triangular, 60° geometry provides predictable chip formation and simple indexability, making it a reliable choice for workshops seeking steady cycle times and reproducible surface quality. The construct is particularly beneficial where uninterrupted surface finish and dimensional stability are required. Clear compatibility and straightforward system integration Compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness; this insert follows the ISO-DIN convention for turning plates and fits common external holders or boring bars that accept TNMG-style inserts. The 0° clearance angle and the specified plate thickness ensure mechanical stability in the clamped assembly, while the central cylindrical hole secures the insert against rotational and axial movement. Selecting the correct holder and screw set completes the system and simplifies procurement and stocking in production environments. Coating and substrate: durability where it matters The cutting material is cemented carbide with a CVD coating (T6215) that is engineered for enhanced wear resistance when cutting rostfreier Stahl. The chemical vapour deposition layer provides a hard, adherent surface that reduces flank wear and edge chipping under stable or mildly interrupted cuts. For machining stainless steels, this combination helps control work-hardening effects and supports repeatable tool life — an important factor when aiming for consistent batch-to-batch results or long production runs. Practical benefits for process reliability and handling With a 0.8 mm corner radius, the insert balances toughness and the ability to generate robust part geometry without excessive cutting forces. The double-sided chipbreaker and triangular form allow economical indexing and reduce tooling costs per part. When paired with a suitable holder and correct cutting parameters, this insert supports predictable chip control and stable cutting forces, contributing to higher first-pass yields and reduced rework. The ISO-standard nomenclature simplifies inventory management and integration into existing tooling setups. Contact Metav Werkzeuge for application recommendations, availability and to discuss the suitability of the TNMG160408 T6215 Tungaloy insert for specific rostfreier Stahl operations Technical data Article number: 6944857 Manufacturer SKU: TUN6944857 SKU: 6944857-Tungaloy Facts Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Geometry angle: 60° Clearance angle: 0° Special features ISO designation: TNMG160408 Coating / grade: T6215 (CVD-coated) Cutting material: cemented carbide Plate form: triangular Chipbreaker: double-sided Hole style: cylindrical central hole Application: turning (external and internal) Suitable material: rostfreier Stahl FAQ What materials is this insert recommended for? The TNMG160408 T6215 insert is formulated for rostfreier Stahl and performs best under stable to lightly interrupted turning conditions. How does the T6215 coating improve performance? The T6215 CVD coating increases wear resistance and edge stability on the cemented carbide substrate, extending tool life during stainless-steel machining. Is the insert compatible with standard TNMG holders? Yes. The insert follows ISO dimensions for TNMG plates; compatibility depends on holder form, fastening and tolerance class and should be confirmed with the chosen holder. What benefits does the 0.8 mm corner radius provide? A 0.8 mm radius offers a compromise between edge strength and profile control, reducing the risk of edge chipping while producing robust part geometry. Can the insert be used for interrupted cuts? The grade is intended for stable to slightly interrupted conditions; heavily interrupted cuts may require a more robust geometry or different grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Combine the T6215 CVD-coated grade with the TNMG160408 triangular geometry and a 0.8 mm nose radius for reliable stainless-steel turning and extended tool life; order via Metav Werkzeuge or consult our specialists for application support. TNMG160408 T6215 — ISO triangular turning insert (Turning), CVD-coated carbide — Tungaloy TNMG160408 T6215 is an ISO-standard triangular turning insert designed for stable external and internal turning operations, especially on stainless steels. TNMG160408 geometry for 60° turning CVD-coated carbide grade T6215 for stainless steels Double-sided insert with cylindrical hole 0° clearance for stable cutting conditions Consistent wear resistance for stainless-steel turning The CVD-coated T6215 grade combines a hard, wear-resistant surface with a tough carbide substrate to extend tool life during continuous and slightly interrupted cuts on stainless steels. The chemical vapour deposition process produces a uniform CVD coating that reduces adhesion and built-up edge, which is a common challenge when machining austenitic stainless grades. For production environments this means fewer insert changes and more predictable cycle times; the outcome is improved process stability and better overall economy per cutting edge. The insert grade is engineered for repeatable performance in series turning, where consistent surface quality and dimensional stability matter. Geometry and edge form tuned for productive machining The triangular form with an included angle of 60° and a 0.8 mm nose radius provides a balance between edge strength and surface finish. The neutral 0° clearance is suitable for stable setups and offers reliable contact behaviour in both external and internal turning. As a double-sided indexable insert with a cylindrical locating hole, it provides two usable cutting edges and straightforward seating in compatible ISO holders. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening, size and thickness; using the correct clamping arrangement and matching the chipbreaker to the workpiece and machining conditions will deliver the best results in finishing and semi-finishing passes. System approach, application advice and productivity gains This insert is part of an ISO turning insert system and is intended for use with a matching external holder or boring bar, clamping set and replacement screws. The ISO series designation ensures interchangeability within standard tool systems when the holder geometry is matched correctly. For stainless-steel applications, chip control and coolant strategy influence tool life significantly; selecting the appropriate chipbreaker and optimising cutting parameters helps to avoid built-up edge and maintain surface integrity. In production-oriented shops the result is fewer interruptions, consistent surface quality and improved throughput — all supporting a productive machining process and reliable batch output. For precision turning with Tungaloy’s wear-resistant T6215 grade, contact Metav Werkzeuge for availability and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876166 SKU: 6876166-Tungaloy Manufacturer SKU: TUN6876166 Model series: ISO-Drehwendeschneidplatten Name: TNMG160408 T6215 Tungaloy-Wendeplatte Dimensions & key values Included angle: 60° Nose radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Clearance angle: 0° Hole: cylindrical hole Materials & features Material: carbide Coating/grade: CVD-coated T6215 Insert shape: triangular Chipbreaker: double-sided Application: turning (external and internal) With hole for positive locating and clamping FAQ What materials is this insert intended for? The TNMG160408 T6215 insert is designed primarily for stainless steels, offering wear-resistant performance under stable to lightly interrupted cutting conditions. Which toolholders are compatible with this insert? Compatibility requires matching form, clearance angle, tolerance class, fastening method, plate size and thickness; the TNMG160408 will fit standard ISO triangular turning holders when these parameters align. How many cutting edges are available per insert? The insert is double-sided; rotating the indexable plate provides two usable cutting edges before replacement is required. What advantages does the T6215 CVD coating provide? The CVD coating on grade T6215 increases wear resistance and reduces adhesion when machining stainless steels, improving edge life and ensuring more consistent surface finish. Is the insert suitable for internal turning and finishing operations? Yes, the TNMG160408 geometry and 0.8 mm nose radius make it suitable for both external and internal turning, with careful selection of chipbreaker and machining parameters for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide (T6215) grade and a proven 60° triangular geometry for reliable turning cycles; the result is extended tool life and consistent surface quality in the machining of stainless steel. Order the TNMG160408 T6215 indexable insert directly via Metav Werkzeuge or consult Metav Werkzeuge for application-specific guidance. TNMG160408 T6215 indexable insert for turning — CVD-coated carbide, 60° geometry — Tungaloy The TNMG160408 T6215 is an ISO-standard triangular indexable insert engineered for external and internal turning; it combines a robust CVD-coated carbide grade with a double-sided chipbreaker to suit stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO triangular insert, 60° geometry 0.8 mm corner radius for fine finishing Double-sided chipbreaker, cylindrical hole High-performance grade for stainless steel with controlled wear The combination of a CVD-coated carbide substrate and the T6215 wear grade provides a balance between toughness and abrasion resistance that is particularly beneficial when machining stainless steel. The coating promotes stable edge life and predictable flank wear, which reduces the frequency of insert changes and helps maintain batch-to-batch consistency. For production environments where downtime affects throughput, this insert supports sustained cutting regimes and contributes to lower overall machining costs through longer intervals between regrinds or replacements. Geometry and edge form that favour reproducible surface quality The 60° triangular shape with a 0.8 mm corner radius and 0° relief angle delivers a versatile cutting geometry for both roughing and finishing passes. The double-sided chipbreaker ensures effective chip control while the cylindrical hole provides secure clamping in compatible holders. Conformance to ISO standards eases holder selection and interchangeability: compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness, enabling straightforward integration into existing tool systems and predictable process set-up. Process reliability, efficiency and application scope Designed for external and internal turning, the insert performs reliably under stable to lightly interrupted conditions and is intended to deliver consistent dimensional accuracy and improved surface integrity. The insert’s design minimises vibration at the cutting edge, helping to achieve tighter tolerances with fewer scrap parts. For production-oriented workshops and subcontractors, the focus on process reliability and economical tool life supports predictable machining costs and higher machine utilisation. Technical parameters and compatibility checks are available from Metav Werkzeuge to assist in selecting the correct holder and cutting data for specific workpiece alloys. For application advice or to order original Tungaloy indexable inserts and accessories, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and supply. Technical Data Article number: 6944845 Manufacturer SKU: TUN6944845 SKU: 6944845-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160408 T6215 Tungaloy-Wendeplatte Core data Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Features & applications Material: Hartmetall Coating / sort: T6215 (CVD-coated carbide) Double-sided chipbreaker With cylindrical hole ISO triangular insert Application: Drehen (external and internal turning) Recommended for stainless steel under stable to lightly interrupted conditions FAQ Which materials is this insert suitable for? The TNMG160408 T6215 insert is recommended primarily for stainless steel and similar alloys; its CVD-coated carbide composition is chosen to balance abrasion resistance and toughness for those materials. How does the T6215 grade affect tool life and finish? Tungaloy’s T6215 grade improves wear resistance and edge stability, which extends tool life and supports consistent surface finish during extended production runs. What holders are compatible with this insert? Compatibility depends on holder geometry and clamping style; the insert’s ISO designation, 16 mm size, cylindrical hole and thickness match standard ISO triangular turning holders when matched by form, relief angle and tolerance class. Is the insert reversible or single-use? The insert is double-sided with a chipbreaker on both sides, allowing rotation to a fresh cutting edge when the first edge reaches its wear limit, effectively doubling the number of usable edges per insert. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius enhances edge strength for improved tool life while still permitting fine surface finishes; it is suitable for light finishing passes as well as stable roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Benefit from a wear‑resistant CVD‑coated carbide grade and a compact triangular geometry that deliver stable turning of stainless steel under steady or slightly interrupted conditions; compatible with ISO‑standard toolholders for straightforward integration — order directly via Metav Werkzeuge or consult our technical advisors if required. TNMG 160408 T6215 ISO turning insert for stainless steel by Tungaloy The TNMG 160408 T6215 is an ISO‑standard triangular turning insert designed for external and internal turning of stainless steels, offering a robust edge geometry for stable cutting under mostly continuous conditions. CVD‑coated carbide T6215 Optimised for stainless steel turning 0° clearance angle for stable cutting Triangular 16 mm, 0.8 mm corner radius Dependable wear resistance for consistent machining The TNMG160408 T6215 insert pairs a CVD‑coated carbide grade with a geometry optimised for turning stainless steel, which improves resistance to abrasive and adhesive wear during sustained cuts. The T6215 grade is formulated to maintain cutting capability under stable to mildly interrupted conditions, leading to extended tool life and fewer insert changes. The combination of a 0° clearance and a 0.8 mm corner radius provides robust edge strength, while the double‑sided chipbreaker ensures controlled chip formation and safe evacuation, reducing the likelihood of built‑up edge and surface damage. ISO compatibility reduces setup time and simplifies inventory Designed to the ISO series for turning inserts, this component fits common external holders and boring bars when shape, clearance angle, tolerance class, fastening, size and thickness match. The insert’s 16 mm designation and 4.76 mm thickness make it straightforward to identify and pair with existing toolholders. For users unfamiliar with the standard, ISO designation indicates an internationally recognised geometry and clamping interface, which helps standardise spares, lowers administrative overhead and shortens machine downtime when changes are required. The insert, holder, backing shim and clamping set form a system that can be stocked and managed efficiently. Predictable productivity and quality in production Selecting the right chipbreaker and the T6215 grade supports reproducible surface quality and stable cutting performance, which translates into higher throughput and lower per‑part tooling cost over time. The triangular form provides multiple indexable edges per insert, and the cylindrical hole ensures secure clamping and repeatable positioning. For operations targeting consistent dimensional accuracy and surface finish, this insert contributes to fewer stoppages and steadier cycle times. The proven manufacturing quality from Tungaloy supports repeatable outcomes across batches and helps maintain process reliability in series production. For reliable stainless‑steel turning with a CVD‑coated carbide grade, request the Tungaloy TNMG 160408 T6215 through Metav Werkzeuge or contact our technical team for application advice at info@metav-werkzeuge.com Technical data Article number: 6875822 SKU: 6875822-Tungaloy Manufacturer SKU: TUN6875822 Facts Insert designation: TNMG160408 Grade/coating: T6215 Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 60° Special features Material: carbide (CVD‑coated) Geometry: triangular, double‑sided chipbreaker Hole: with hole, cylindrical hole Application: turning; suited to stainless steel under stable to slightly interrupted conditions Model series: ISO turning inserts System components: compatible with ISO holders, shims, clamping sets and replacement screws FAQ Which materials is this insert best suited for? The TNMG 160408 T6215 insert is formulated primarily for stainless steel machining; the CVD‑coated carbide composition provides wear resistance and good performance under stable to slightly interrupted cutting. How is the insert mounted and indexed? The insert mounts in ISO‑compatible holders using its cylindrical hole and clamping hardware; the triangular form offers multiple usable edges for indexing. Is the TNMG 160408 reversible or double‑sided? Yes, the insert features a double‑sided chipbreaker, allowing more than one cutting edge to be used before replacement, which improves economics and uptime. What measurable features should be checked for holder compatibility? Match the insert designation (TNMG160408), 16 mm size, 4.76 mm thickness, 0° clearance and hole style; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. How does the T6215 grade influence machining results? The T6215 CVD‑coated carbide grade favours wear resistance and stable cutting in stainless steel, helping to maintain a consistent surface finish and prolong tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T6215 grade and the TNMG160408 triangular form for consistent, wear‑resistant turning of stainless steels; the double‑sided chipbreaker and cylindrical hole ensure stable clamping and extended tool life. Order directly via Metav Werkzeuge or ask the consultants for application support. TNMG 160408 T6215 – Indexable turning insert for stainless steel (Tungaloy) The TNMG160408 T6215 is an ISO‑standard indexable insert designed for external and internal turning of stainless steels, delivering wear resistance and predictable chip control in stable to lightly interrupted cuts. ISO TNMG 160408 triangular insert CVD‑coated carbide grade T6215 Optimised for turning stainless steel Double‑sided chipbreaker with cylindrical hole Consistent wear resistance for stainless steel turning The combination of a CVD‑coated carbide substrate and the specified T6215 grade provides robust wear resistance when machining stainless steels. CVD (chemical vapour deposition) produces a thin, hard coating that reduces flank wear and improves the edge life under continuous cutting conditions. For production environments this translates into fewer insert changes, longer stable tool life and a more predictable maintenance rhythm, helping to keep machining cycles steady and downtime to a minimum. Secure mounting and predictable chip control As an ISO‑standard triangular insert, the component features a cylindrical hole and a double‑sided chipbreaker that permit both secure clamping and repeatable chip formation. The insert’s geometry—including the 0° relief angle, the 0.8 mm corner radius and the 60° included angle—determines fit and performance with compatible holders. Compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness; matching the insert to the correct holder ensures correct seating, repeatable cutting parameters and improved surface finish. Designed for stable to slightly interrupted machining This insert is intended for external and internal turning under stable or lightly interrupted conditions. The double‑sided design effectively doubles the usable cutting edges, while the 0.8 mm radius balances edge strength and surface quality for common turning operations. The result is a cost‑efficient solution that maintains dimensional accuracy and contributes to consistent part quality across batches. For customers new to indexable tooling, the chipbreaker helps control swarf and reduces the need for operator intervention during continuous runs. Practical choice for shopfloor integration Adopting ISO‑conforming inserts simplifies tool inventory and replacement procedures. The TNMG format is widely supported by a range of clamping systems and boring bars, making it straightforward to integrate into existing toolholders. The CVD coating improves resistance to built‑up edge when machining stainless steels, which can otherwise cause variable surface finish and tool life; this promotes smoother production runs and lower scrap rates. If further process data or holder compatibility checks are required, technical advice can be provided to align tool selection with machine and workpiece conditions. Contact Metav Werkzeuge for tailored advice and supply of genuine Tungaloy TNMG160408 T6215 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data Article number: 6944879-Tungaloy Manufacturer SKU: TUN6944879 Manufacturer item number: 6944879 Label: TNMG160408 T6215 Tungaloy-Wendeplatte Dimensions & core specifications Insert designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Materials & features Material: carbide Coating: CVD Grade: T6215 (wear‑resistant for stainless steel) Shape: triangular Hole: cylindrical hole (with hole) Chipbreaker: double‑sided Application: turning (external and internal) Typical assembly: ISO insert + suitable external holder or boring bar FAQ What materials is this insert best suited for? The TNMG160408 T6215 insert is tailored for machining stainless steels; the CVD‑coated carbide and T6215 grade offer improved wear resistance under stable to lightly interrupted cutting conditions. How is the insert mounted in a holder? This indexable insert uses a cylindrical hole and conforms to ISO‑TNMG form; correct mounting depends on matching form, relief angle, tolerance class, fastening and thickness with the chosen holder. How many cutting edges are available per insert? The triangular, double‑sided design provides multiple usable cutting edges, increasing the number of re‑indexing options before replacement. Does the TNMG160408 suit interrupted cuts? The insert performs best in stable to slightly interrupted cutting; for heavily interrupted or highly unstable conditions, a different geometry or a tougher grade should be considered. What performance benefits does the T6215 grade deliver? The T6215 grade combines a robust carbide substrate with a CVD coating to reduce flank wear and support stable chip formation, resulting in longer edge life and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215, a triangular ISO TNMG160408 geometry and a double-sided chipbreaker to secure stable, economical turning of rostfreier Stahl; order the TNMG160408 insert directly via Metav Werkzeuge or consult our specialists for tool selection advice. TNMG160408 T6215 TNMG turning insert by Tungaloy — CVD-coated carbide for turning rostfreier Stahl TNMG160408 T6215 is an ISO-standard indexable turning insert designed for external and internal turning, offering a wear-resistant coating and a chip control geometry for stable to lightly interrupted cutting conditions. ISO TNMG geometry for standard toolholders CVD-coated carbide grade T6215 for wear resistance Double-sided chipbreaker for dependable chip control 0.8 mm nose radius for stable surface finish Greater process reliability through a wear-resistant grade The CVD-coated carbide T6215 provides a consistent edge life when machining rostfreier Stahl, which reduces unplanned tool changes and stabilises cycle times. The coating improves resistance to abrasive and adhesive wear during steady and slightly interrupted cuts, delivering predictable tool life and less variability in batch production. This contributes directly to lower unit costs and smoother production planning while maintaining machining integrity. Fast integration into existing ISO tool systems lowers setup time Built to ISO dimensions, the triangular insert integrates easily with common external holders and boring bars; compatibility is determined by geometry, clearance, tolerance class, fastening and thickness. The 16 mm inscribed circle and 4.76 mm thickness match standard holder pockets, while the 0° clearance and 60° included angle conform to typical TNMG seating. Fewer adjustments are required at tool change, shortening downtime and simplifying inventory management for workshops that rely on standardised tooling. Improved chip control and surface quality with a dual chipbreaker The double-sided chipbreaker channels chips reliably, reducing re-cutting and smoothing the cutting process for both external and internal turning. Better chip control supports consistent surface finish and lowers the risk of workpiece damage or machine stoppages. For jobs where surface integrity matters, the chipbreaker geometry promotes predictable chip formation and easier swarf handling in automated or manual setups, aiding repeatable part quality. Practical system approach for flexible workshop use As part of an ISO insert system, the insert is intended to be used with a compatible holder, clamping set and fastening screws; spares and replacements are straightforward to manage. The insert's triangular form allows indexing to present fresh cutting edges, extending per-insert productivity and reducing tooling stock pressure. Technical guidance is available to match the insert grade and chipbreaker to cutting data, material condition and machine rigidity, ensuring the chosen solution aligns with the required part tolerances and cycle times. For technical selection or availability of the Tungaloy TNMG160408 T6215 insert, contact Metav Werkzeuge for tailored advice and stock information via info@metav-werkzeuge.com or call +49 2822 7131930 — support is available to ensure optimal integration into existing turning processes. Technical data Article number: 6876136 Manufacturer SKU: TUN6876136 Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical, with hole Special features CVD-coated carbide Grade: T6215 — wear-resistant for rostfreier Stahl Triangular insert form Double-sided chipbreaker ISO-standard indexable insert for external and internal turning FAQ What materials is this insert suited for? The TNMG160408 T6215 insert is specified for machining rostfreier Stahl under stable to lightly interrupted cutting conditions and is optimised for reliable wear behaviour. Can the insert be used for internal turning operations? Yes, the ISO TNMG geometry supports both external and internal turning when mounted in a suitable boring bar or holder compatible with the insert dimensions. Which dimensions and geometry should be checked for holder compatibility? Verify the inscribed circle (16 mm), thickness (4.76 mm), included angle (60°), clearance (0°) and the triangular seating form to ensure correct fit and clamping. How does the chipbreaker affect machining? The double-sided chipbreaker promotes consistent chip formation and improved swarf control, which helps maintain surface finish and reduces the risk of chip-related interruptions. What is the article and SKU reference for ordering and traceability? The article number is 6876136 and the manufacturer SKU is TUN6876136; both identifiers apply to the TNMG160408 T6215 Tungaloy indexable insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T6215 grade and the 0.8 mm corner radius for stable machining of stainless steels; the ISO form ensures straightforward compatibility with standard holders. Order the TNMG160408 T6215 insert directly via Metav Werkzeuge or ask the consultants for application advice. TNMG 160408 T6215 TNMG – Turning insert, CVD-coated carbide (Tungaloy) A TNMG160408 T6215 triangular ISO turning insert designed for reliable stainless steel machining under stable to lightly interrupted conditions. ISO triangular insert form TNMG CVD-coated carbide grade T6215 Suitable for machining stainless steel 60° included angle, 0.8 mm corner radius Consistent wear resistance for longer tool life The CVD-coated T6215 grade delivers enhanced wear resistance, which translates into longer tool life and fewer insert changes during runs. For series production where part-to-part consistency matters, the coating reduces flank and crater wear under typical turning feeds and speeds, maintaining surface quality and dimensional stability. Explaining briefly: chemical vapour deposition (CVD) is a coating process that bonds hard layers to the substrate, improving abrasion resistance without compromising the core toughness of the carbide substrate. Simple integration with ISO toolholders for quicker set-ups The ISO designation and triangular geometry make the insert straightforward to match to standard toolholders. Key interface parameters—form, relief angle (0°), tolerance class, fastening and thickness—determine compatibility, so the insert fits into existing tool systems with minimal rework. The triangle shape and cylindrical hole support secure clamping, which helps reduce vibration and supports stable cutting, leading to fewer interruptions and shorter overall set-up times. Process security and chip control enhance productivity The double-sided chipbreaker design supports controlled chip formation during turning, especially on stainless steels where chip control can be challenging. With a 60° included angle, a 0.8 mm corner radius and a plate thickness of 4.76 mm, the insert balances strength at the cutting edge with the ability to achieve consistent surface finish. The ISO plate size of 16 provides a stable contact area, while the CVD-treated hardmetal core maintains cutting performance across extended cycles. For applications requiring repeated accuracy and uptime, this combination promotes predictable tool behaviour and fewer unplanned interventions. Choose Tungaloy quality for dependable stainless steel turning — contact Metav Werkzeuge for specific application guidance or to arrange supply details. Technical data Article number: 6944863-Tungaloy Manufacturer SKU: TUN6944863 Manufacturer item no.: 6944863 Model series: ISO turning inserts Application: Turning Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Thickness: 4.76 mm Size: 16 mm Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Triangular plate, ISO TNMG160408 Cylindrical hole for secure clamping Compatible with ISO external holders and boring bars FAQ Is this insert suitable for stainless steel turning? Yes. The TNMG160408 T6215 insert is specified for turning stainless steels, with a CVD coating formulated to resist the adhesive and abrasive wear common with those materials. What does the T6215 grade indicate? T6215 denotes a CVD-coated hardmetal grade optimised for wear resistance and stable cutting in stainless steel applications, offering a balance of toughness and abrasion resistance. Which toolholders will accept this insert? Compatibility depends on holder form, relief angle, tolerance and clamping method; the TNMG form and ISO designation mean the insert fits standard triangular TNMG holders when those parameters match. How does the chipbreaker affect performance? The double-sided chipbreaker promotes controlled chip formation, improving surface finish and reducing the risk of long, entangling chips when machining stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Combine the CVD-coated carbide wear resistance, suitability for machining stainless steels, and ISO interchangeability to secure consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for selection assistance. TNMG 160408 T6215 – Turning indexable insert, CVD-coated carbide by Tungaloy The TNMG160408 T6215 is an ISO-standard turning insert designed for stable to lightly interrupted turning of stainless steels, providing a balance of wear resistance and edge robustness for general workshop and production use. CVD-coated carbide for high wear resistance Optimised for turning of stainless steels Triangular ISO insert with 0.8 mm corner radius Consistent tool life through CVD coating and material choice The CVD-coated carbide grade delivers reliable wear resistance in demanding conditions, especially when machining stainless steels. A CVD coating forms a hard, adherent layer that reduces flank wear and helps maintain edge geometry over longer periods, which in turn supports steady component quality and fewer tool changes. This makes the insert suitable where repeatable surface finish and process stability are needed, reducing downtime and boosting throughput. ISO conformity and practical holder compatibility Supplied in the ISO TNMG form, the indexable plate adheres to standard dimensions and mounting interfaces so that holder compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The build of the system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Choosing the correct holder and clamp ensures secure seating and repeatable positioning of the cutting edge, which preserves dimensional accuracy in serial turning operations. Geometry that balances strength and versatility With a triangular shape and a 60° cutting angle, the insert offers multiple cutting edges per index while the 0.8 mm corner radius increases edge strength for interrupted cuts and tougher materials. The plate features a double-sided chipbreaker, optimised for stable to mildly interrupted cuts, providing controlled chip formation and evacuation. The zero-degree clearance angle helps when a neutral relief is required for specific holder geometries or when working close to shoulders and grooves. Practical application notes and handling advice Intended for turning applications, the insert performs best in setups that match its geometry and CVD coating properties. Use a suitable feed and depth of cut consistent with the workpiece material and machine rigidity; the insert excels where process stability and predictable tool life are priorities. Maintain the recommended clamp torque for the replacement screws and check seating surfaces on both holder and shim to ensure accurate repeatability when changing indexes or plates. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy TNMG160408 T6215 insert into production and to arrange prompt shipment or technical guidance Technical data Article number: 6944833 Manufacturer SKU: TUN6944833 SKU: 6944833-Tungaloy ISO designation: TNMG160408 Shape: triangular Facts Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Cutting angle: 60° Clearance angle: 0° Special features Coating: T6215 (CVD-coated) Material: carbide Chipbreaker: double-sided Hole: with cylindrical hole Application: turning of stainless steels System components: ISO insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The TNMG160408 T6215 insert from Tungaloy is optimised for machining stainless steels, delivering wear resistance and edge stability in stable to lightly interrupted turning operations. Is the insert compatible with standard TNMG holders? Yes. The ISO designation TNMG160408 means the insert fits standard TNMG holders when shape, clearance angle, tolerance class, fixing method, size and thickness are matched. How many cutting edges are available per plate? The triangular form provides multiple usable edges per index; the double-sided design extends the number of reversible cutting edges available on the plate. What does the T6215 coating offer in practice? The T6215 CVD coating increases surface hardness and wear resistance, helping to maintain cutting geometry and produce consistent surface finishes during prolonged turning of stainless steels. Which SKU should be referenced when ordering replacements? Please use the manufacturer SKU TUN6944833 or article number 6944833 when requesting the Tungaloy TNMG160408 T6215 insert to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for durable performance in rostfreier Stahl turning, combined with a 60° triangular geometry and a compact 0.8 mm corner radius for versatile external and internal turning. Order the original insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and batch availability. TNMG 160408 T6215 — Indexable insert for Turning by Tungaloy The TNMG160408 T6215 indexable insert is a triangular, ISO‑standard insert designed for general turning and finishing of rostfreier Stahl under stable to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for turning rostfreier Stahl Triangular insert, 60° cutting edge 0.8 mm corner radius for versatile cutting Double-sided with cylindrical hole Consistent wear resistance for rostfreier Stahl machining The CVD‑coated carbide grade T6215 provides a balanced combination of wear resistance and toughness, tailored for turning applications in rostfreier Stahl. The chemical vapour deposition layer reduces flank wear and improves edge stability, which leads to more predictable tool life and fewer unexpected tool changes. For production environments that require consistent cycle times, this insert supports a steady removal rate and a reduced risk of built‑up edge, which contributes to reliable dimensional control and surface integrity. Easy integration into ISO turning systems and secure clamping As an ISO‑standard triangular insert, the plate’s geometry and hole configuration ensure compatibility with a wide range of external holders and boring bars when the holder matches in form, relief angle, tolerance class, fastening method, size and thickness. The 60° cutting angle and cylindrical centre hole allow simple, repeatable locating and clamping; the insert is double‑sided, offering two effective edges per seat and lowering the cost per cutting edge. Checking the holder’s pocket angle and clamping screw type avoids misfits and secures correct seating, which is essential for stable cutting performance and repeatable results. Productivity gains through stable chip formation and surface finish The 0.8 mm corner radius combines edge strength with the ability to achieve good surface finishes in both external and internal operations. The double‑sided design extends usable life before replacement, and the combination of substrate and coating promotes predictable chip behaviour, making it suitable for finishing and semi‑finishing passes on rostfreier Stahl. For shops focused on throughput, the insert reduces unplanned downtime and supports consistent part quality, while its standard ISO form simplifies inventory management and tool planning. Contact Metav Werkzeuge for original Tungaloy TNMG160408 T6215 indexable inserts and personalised advice on holder matching and availability — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6944840 Manufacturer SKU: TUN6944840 SKU: 6944840-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TNMG160408 T6215 Tungaloy indexable insert Facts Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 60° Special features Material: carbide Coating: CVD (grade T6215) Triangular plate, double‑sided Cylindrical centre hole Application: turning FAQ What materials is this insert suited for? The TNMG160408 T6215 insert is optimised for machining rostfreier Stahl and performs well where wear resistance and controlled chip formation are required. Which key dimensions should be checked before fitting? Relevant dimensions are insert size 16 mm, thickness 4.76 mm, corner radius 0.8 mm and the 60° geometry; confirm these against the holder pocket and clamping system. Is the insert reversible and how many edges are available? The plate is double‑sided, providing two cutting edges per indexable position and reducing the cost per edge compared with single‑sided alternatives. How is holder compatibility determined? Compatibility depends on form, free (relief) angle, tolerance class, fastening, size and thickness; match the ISO form and pocket geometry for correct seating and clamping. Can this insert handle interrupted cuts? The T6215 grade and substrate combination are designed for stable to lightly interrupted cutting conditions, offering a balance of toughness and wear resistance for such operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T6215 Wendeplatten - Tungaloy
Combine CVD-coated carbide endurance and precise ISO compatibility for steady, productive turning operations; the robust geometry and 0.8 mm corner radius ensure reliable profile control. For procurement and technical queries, order directly via Metav Werkzeuge or consult our specialists. TNMG 160408 T6215 indexable insert for Turning — Tungaloy TNMG160408 T6215 is an ISO-standard triangular indexable insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions ISO TNMG 160408 triangle insert Grade T6215 with CVD-coated carbide 0.8 mm corner radius for versatile profiles Suited for stainless steel turning under stable cuts High-performance wear resistance for consistent cycle times The combination of a CVD-coated surface and carbide substrate in grade T6215 delivers improved wear resistance and extended tool life during series turning. The coating reduces flank and crater wear, which helps to maintain dimensional accuracy and reduces unplanned tool changes. This stability translates into predictable cycle times and fewer interruptions on the shop floor. Where machining stability is present, the insert’s surface treatment supports higher cumulative cutting volumes before regrinding or replacement becomes necessary, thereby improving overall equipment effectiveness. Geometry and compatibility that simplify tool selection The ISO TNMG 160408 geometry and triangular indexable insert format provide a secure match with standard external holders and boring bars; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. The 0.8 mm corner radius is suited to general-purpose profiling and light chamfering, while the 4.76 mm thickness supplies the rigidity needed for stable cuts. Built with a cylindrical hole, the insert is easy to locate and clamp, assuring repeatable seating and stable cutting-edge support. This clear geometry reduces set-up time and minimises the need for trial-and-error on the machine. Practical application notes and productivity advantages Intended for turning of stainless steel, the double-sided chipbreaker design allows two indexed cutting edges per position, improving economy per insert and reducing inventory turnover for small to medium batch sizes. Select the chipbreaker and grade T6215 to match workpiece alloy, feed and depth of cut; for intermittent cuts or unstable setups, opt for a more robust machining strategy or alternate grade. The insert’s triangular shape offers three usable edges, and combined with its consistent cutting edge and coating, it supports a high degree of process reliability and surface quality in series production. For Tungaloy quality and rapid availability, contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will assist with selection and compatibility checks. Technical Data Article number: 6877405 Manufacturer SKU: TUN6877405 SKU: 6877405-Tungaloy Facts ISO designation: 160408 Insert designation: TNMG160408 Thickness: 4.76 mm Plate size: 16 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 60° Special features Material: carbide Grade/coating: T6215, CVD-coated Shape: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert designed to machine? The TNMG160408 T6215 insert is designed primarily for machining stainless steel and performs best under stable to lightly interrupted cutting conditions. How many cutting edges are available per insert? The triangular geometry and double-sided chipbreaker provide up to three indexed positions, offering multiple usable cutting edges for economy in production. Which holder compatibility factors should be checked before use? Compatibility depends on insert form, clearance angle (0°), tolerance class, fastening method, size and thickness; confirm the holder fits the ISO TNMG 160408 dimensions. Is the coating suitable for higher cutting speeds? The CVD-coated layer of grade T6215 improves wear resistance and is suitable for productive turning where process stability permits elevated cutting parameters. What corner radius is best for profiling versus finishing? The 0.8 mm corner radius balances profile strength and surface finish; choose a smaller radius for fine finishing and this radius for general profiling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide T9205 and the ISO TNMG format for productive, high-speed turning of steel; the combination of robust grade and precise geometry ensures consistent chip control and reduced tool change frequency. Order directly via Metav Werkzeuge or consult our advisors for application-specific advice. TNMG 160408 T9205 — TNMG indexable turning insert, CVD-coated carbide, 60° (Tungaloy) A TNMG160408 T9205 indexable turning insert designed for productive external and internal turning of steel where stable conditions and higher cutting speeds are required ISO TNMG 160408 format, 60° triangle CVD-coated carbide grade T9205 Double-sided insert with centre hole 0.8 mm corner radius, 4.76 mm thickness Increase throughput with a wear-resistant CVD grade The CVD-coated T9205 grade is developed for productive turning of steel under stable cutting conditions and at elevated speeds. The coating enhances resistance to abrasive wear and thermal loads, which translates into longer intervals between indexings and fewer interruptions on the shopfloor. For applications emphasising cycle time and consistent part quality, this carbide insert offers a measurable improvement in process stability and machining economy. Reliable geometry for consistent surface quality The triangular ISO TNMG geometry with a 60° included angle and a 0.8 mm corner radius provides predictable engagement and strength at the cutting edge. The 4.76 mm plate thickness and centre hole ensure secure clamping in compatible holders, reducing micro-movements that can impair surface finish. These geometric parameters contribute directly to repeatable part tolerance and improved component appearance when turning shafts, shoulders or internal features. Practical compatibility and selection guidance Compatibility with a chosen holder depends on form, relief angle, tolerance class, fastening method, size and thickness. The relief angle here is 0°, so pairing with the correct external or boring bar is essential for the intended cutting direction. Select the chipbreaker variant and grade according to the workpiece material, machining type and machine rigidity; the double-sided chipbreaker option maximises usable edges and supports cost-effective indexability under consistent feed and depth-of-cut regimes. Fewer interruptions, better overall efficiency By favouring a wear-resistant grade and an optimised insert geometry, workshops achieve lower tool consumption and reduced set-up frequency. The result is improved net machining time and a more predictable process window for batch production. Combined with standard ISO compatibility and a robust mounting concept, this insert helps maintain throughput and surface consistency, supporting both small-series shops and larger production environments that prioritise reliable, repeatable results. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and recommendations for holder compatibility — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6785750 Manufacturer SKU: TUN6785750 Model series: ISO turning indexable inserts Key specifications Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole: centre, cylindrical Special features Material: carbide Coating/grade: T9205 (CVD-coated carbide) Shape: triangular Chipbreaker: double-sided Typical application: external and internal turning of steel Compatibility: ISO TNMG format, select holder by form and tolerance FAQ What materials is this insert suitable for? The T9205 CVD-coated carbide insert is optimised for machining steel under stable conditions and higher cutting speeds; selection for other materials should follow compatibility checks. How many cutting edges are available per insert? With a triangular, double-sided design the insert offers multiple indexable edges before disposal, depending on wear and application. Which holder features are required for secure clamping? Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; ensure the holder matches the ISO TNMG format and the 4.76 mm plate thickness. Is this insert suitable for internal and external turning? Yes, the geometry and centre hole mounting allow use in both external turning and boring bars designed for the TNMG format. What benefits does the CVD coating provide? The CVD coating on grade T9205 increases resistance to abrasive and thermal wear, supporting longer cutting life and more consistent part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a consistent triangular geometry delivers durable, high‑productivity performance for stable turning operations; this reduces rework and increases uptime. For purchase or technical advice, order the insert directly via Metav Werkzeuge or consult the specialists if clarification is required. TNMG 160408 T9205 TNMG turning insert – Tungaloy, CVD-coated carbide, 60° The TNMG160408 T9205 is an ISO-standard triangular turning insert designed for productive external and internal turning in stable machining conditions. CVD-coated carbide grade T9205 Suitable for productive steel turning 60° triangular geometry, 0.8 mm corner radius Double-sided chipbreaker with cylindrical hole Durable wear resistance for longer tool life The CVD-coated carbide in T9205 provides a wear-resistant surface that extends service intervals during continuous production. As a CVD-coated grade, the cutting edges resist abrasive wear and maintain dimensional stability at higher cutting speeds, which translates into fewer insert changes and more consistent component quality. The result is improved process efficiency and predictable tool-life behaviour under stable clamping and setup conditions. Accurate geometry for repeatable turning results The triangular 60° insert form with a 0.8 mm corner radius and a 0° clearance geometry ensures repeatable engagement and consistent cutting forces on the workpiece. Compatibility with the toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters ensures secure seating and repeatable results. The ISO-standard format simplifies holder selection and inventory management, supporting fast changeovers and reliable machining tolerances. Controlled chip formation and secure retention A double-sided chipbreaker on this insert provides efficient chip control when paired with appropriate feeds and depths of cut, aiding surface quality and evacuation in turning operations. The cylindrical hole offers positive clamping and stable positioning in indexable holders, while the double-sided design doubles the number of usable cutting edges per insert, reducing tooling costs per part and supporting lean production workflows. Optimised for steel and productive turning strategies Designed primarily for machining steel, the grade and geometry combination supports productive turning where stability and repeatable edge performance are priorities. Selecting the correct chipbreaker and matching the insert to the workpiece rigidity and machining parameters will deliver the best combination of surface finish and productivity. For applications outside standard steel turning, a dedicated grade or geometry should be chosen to maintain process reliability. For application advice, availability or to request the TNMG160408 T9205 insert (SKU TUN6785749), contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists will assist with holder compatibility and cutting‑parameter guidance. Technical data Article number: 6785749 Manufacturer SKU: TUN6785749 SKU: 6785749-Tungaloy Brand: Tungaloy Material: carbide Model series: ISO turning indexable inserts Facts Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical hole Special features Grade/coating: T9205 (CVD-coated) Chipbreaker: double-sided Plate form: triangular Application: turning (external and internal) Indexable, with cylindrical hole for secure clamping ISO-standard insert FAQ Which materials is this insert intended for? The TNMG160408 T9205 insert is optimised for machining steel under stable conditions; the T9205 grade is a wear-resistant, CVD-coated carbide suited to productive turning. How many cutting edges are available per insert? With a double-sided triangular design, the insert provides multiple indexable edges, doubling usable edges compared with single-sided variants and improving cost efficiency. What effect does the 0.8 mm corner radius have on the process? A 0.8 mm corner radius offers a balance between edge strength and surface finish, reducing peak stresses while supporting moderate to heavier finishing passes when tool and workpiece rigidity are sufficient. Is the insert compatible with standard ISO holders? The insert follows ISO geometry; compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness — the TNMG160408 format is widely supported by ISO‑standard turning toolholders. What benefits does the T9205 coating provide? The T9205 CVD coating improves abrasive wear resistance and edge stability at higher cutting speeds, which supports longer tool life and consistent component quality in production turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9205), a 60° triangular geometry and a double-sided chipbreaker for stable, productive turning of steel; order directly via Metav Werkzeuge or consult the technical team for application support. TNMG160408 T9205 TNMG turning insert — CVD-coated carbide, 60° triangle by Tungaloy A TNMG160408 T9205 insert designed for productive external and internal turning of steel under stable machining conditions CVD-coated carbide for wear resistance 60° triangular geometry for versatile turning Double-sided chipbreaker for stable chip control 0.8 mm nose radius; cylindrical hole fixing Maximise machining output with a wear-resistant grade The CVD-coated carbide grade T9205 delivers enhanced wear resistance under higher cutting speeds, which translates into longer index intervals and fewer insert changes. For workshops focused on throughput, this results in measurable gains in productivity and lower tool-handling time. The coating chemistry is selected for consistent performance in steel machining; the result is reduced flank wear and retained edge strength, supporting a more efficient production flow. Predictable chips and secure clamping for consistent surface quality The triangular geometry with a 60° included angle combined with a double-sided chipbreaker provides reliable chip formation during both external and internal turning. The insert’s cylindrical hole enables secure clamping in ISO-standard holders, reducing vibration and improving repeatability. As a consequence, the machining process achieves improved finish and dimensional consistency while minimising interruptions caused by poor chip evacuation. ISO compatibility and clear selection criteria for the workshop Built to ISO dimensions, the insert integrates into standard turning systems when matched for form, clearance, tolerance class, fastening and size. The 16 mm size and 4.76 mm thickness suit common external holders, while the 0.8 mm nose radius balances strength and fine surface capability. Selection of chipbreaker and grade should be guided by workpiece stability and the specific steel grade; if stability is high, the T9205 grade is a cost-effective choice for sustained production. For application advice or availability of Tungaloy TNMG160408 T9205 inserts, contact Metav Werkzeuge for a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785777 Manufacturer SKU: TUN6785777 SKU: 6785777-Tungaloy Model series: ISO turning inserts Designation: TNMG160408 Facts Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide, CVD-coated (T9205) Chipbreaker: double-sided Geometry: triangular, double-sided insert Application: turning (external and internal), productive steel machining FAQ What materials is the TNMG160408 T9205 suited for? The Tungaloy TNMG160408 T9205 insert is formulated for productive machining of steel and performs best under stable cutting conditions with appropriate chipbreaker selection. How is the TNMG160408 fixed in the holder? The TNMG160408 insert features a cylindrical hole for secure clamping in ISO-compatible external holders, ensuring reliable repeatability and reduced vibration. What are the key dimensions to check when replacing inserts? Verify the 16 mm size, 4.76 mm thickness and the 0.8 mm nose radius of the TNMG160408 T9205 to ensure compatibility with the existing holder and the intended surface finish. Can the TNMG160408 handle high cutting speeds? Yes; the CVD-coated T9205 grade on the TNMG160408 is designed to resist wear at elevated cutting speeds, offering extended life in productive turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9205 with a 0.8 mm corner radius and a solid 4.76 mm thickness yields an insert optimised for productive steel turning with stable chip control and long tool life. Order the component directly via Metav Werkzeuge or consult the technical advisers for application-specific selection and fast supply. TNMG160408 T9205 ISO turning insert for steel — Tungaloy, CVD-coated carbide, double-sided chipbreaker The TNMG160408 T9205 is an ISO-indexable turning insert engineered for productive external and internal turning of steel, offering a wear-resistant CVD coating and a geometry suited to stable machining conditions. CVD-coated carbide for high wear resistance Double-sided chipbreaker for two cutting edges 0.8 mm corner radius for reliable finishing 4.76 mm thickness for increased rigidity Built for productive steel turning The combination of CVD-coated surfaces and a wear-resistant T9205 grade carbide provides improved abrasion resistance and consistent edge life under elevated cutting speeds. This design reduces flank and crater wear, which in turn supports predictable tool-change intervals and lower machining costs per component. The substrate and coating synergy enable a controlled break-in behaviour, so the machining process maintains a consistent surface finish and repeatable dimensional accuracy across batches. Secure clamping and precise geometry for stable cuts An ISO triangular insert with a 60° included angle and a triangular form gives a compact, rigid seat in compatible holders; the cylindrical hole ensures positive clamping with standard screws and pads. The 0.8 mm corner radius supports reliable finishing passes while the 4.76 mm thickness increases resistance to deflection in interrupted cuts. The double-sided chipbreaker provides two usable edges per indexation, extending productive edge life and reducing tooling costs. The combination of features makes the insert a robust choice where fixture stability and repeatable tool positioning are required. Application guidance to maximise process security Designed for turning under stable conditions, the insert excels in medium to high cutting speeds when mounted in a suitable rigid holder or boring bar as part of a complete indexable system. The chip control characteristics suit a range of steel grades when paired with appropriate coolant and feed settings; select the chipbreaker and grade to match workpiece material and setup rigidity. For internal and external turning operations the insert supports predictable wear patterns and efficient swarf evacuation, helping to sustain cycle-time targets and reduce rework rates. Technical advisers are available to recommend optimal holder pairings and cutting parameters for specific production needs. For high-productivity steel turning with Tungaloy's T9205 grade, contact Metav Werkzeuge for tailored selection and prompt delivery: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6785747 Manufacturer SKU: TUN6785747 SKU: 6785747-Tungaloy Model series: ISO-indexable turning inserts Material: carbide Manufacturer: Tungaloy Facts Insert designation: TNMG160408 Grade/coating: T9205 (CVD-coated) Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Included angle: 60° Relief angle: 0° Hole: with hole (cylindrical) Special features Double-sided chipbreaker Triangular plate form Compatible with ISO turning holders Intended application: turning (external and internal) Robust substrate for stable machining FAQ What materials is this insert best suited for? The TNMG160408 T9205 insert is formulated for productive machining of steel; the T9205 grade and CVD-coated surface deliver abrasion resistance and consistent performance in stable turning operations. How many usable edges does the insert provide? With its double-sided chipbreaker and triangular geometry, the insert offers multiple indexable edges, extending usable life before a replacement is required. What should be considered when selecting a holder? Holder compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; select a rigid ISO-compatible external holder or boring bar that matches the insert's cylindrical hole and 60° geometry. Can this insert be used for finishing passes? Yes; the 0.8 mm corner radius and stable geometry make the insert suitable for finishing and semi-finishing when mounted in a sufficiently rigid setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9205, a 0.8 mm corner radius and ISO conformity for reliable, productive turning of steel; order or request advice via Metav Werkzeuge for fast availability and expert support. TNMG160408 T9205 — ISO turning insert for productive steel turning by Tungaloy A TNMG160408 T9205 turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide for high wear resistance ISO TNMG160408 triangular insert, 16 mm 0.8 mm corner radius for versatile profiling Double-sided design with cylindrical hole Greater productivity through wear-resistant coating The combination of a CVD-coated surface and carbide substrate in the T9205 grade provides improved wear resistance and thermal stability, enabling higher cutting speeds during continuous turning operations. This results in longer edge life and fewer interruptions for index changes, which supports a more efficient production flow. The CVD process produces a uniform, hard coating that protects the cutting edge against abrasion and adhesion, so the main benefit is increased process stability and predictable tool life under properly controlled conditions. Secure clamping and correct holder selection for repeatable results Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; attention to these parameters avoids poor seating or runout. The insert’s 0° relief angle and triangular form require a matching ISO TNMG pocket or suitable boring bar seat; the cylindrical hole facilitates positive clamping with the correct screw and clamp assembly. Selecting the correct holder and clamping kit translates directly into repeatable geometry, consistent surface finish and lower scrap rates — a clear operational advantage when reproducibility matters. Versatility at the edge — cost-effective turning on the shop floor The double-sided construction and the 0.8 mm corner radius balance edge strength with surface quality: the radius adds robustness for interrupted cuts and stability on heavier passes, while still allowing acceptable part finish without excessive feed reduction. The 16 mm triangular plate and 4.76 mm thickness give a compact footprint with multiple usable edges, reducing cost per cutting edge compared with single-edge solutions. For straightforward applications such as external and internal turning of steel, this geometry supports economical batch production and simplifies inventory management. For high-performance steel turning trust the Tungaloy T9205 grade — contact Metav Werkzeuge for availability and machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785773 SKU: 6785773-Tungaloy Manufacturer SKU: TUN6785773 Brand: Tungaloy Model series: ISO turning inserts Specifications Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Insert angle: 60° Relief angle: 0° Manufacturer article number: 6785773 Special features Grade: T9205 (CVD-coated carbide) Double-sided insert Cylindrical hole for clamping Triangular plate form Suitable for turning steel under stable conditions FAQ What materials is this insert intended for? The TNMG160408 T9205 insert is specified for productive turning of steel; the T9205 grade is a wear-resistant CVD-coated carbide designed for stable steel machining. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and reduces chipping risk during interrupted cuts; the TNMG160408 geometry therefore offers a compromise between robustness and surface finish. Is this insert indexable on both sides? Yes — the insert is double-sided, providing multiple usable cutting edges and improving cost efficiency per edge for the Tungaloy turning insert (SKU 6785773-Tungaloy). Which holder features must be checked for compatibility? Compatibility is governed by insert form, relief angle (0°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm); matching these ensures correct seating and repeatable performance. What clamping method suits the insert? The insert has a cylindrical hole and is intended for secure clamping with the correct screw and clamp saddle compatible with ISO TNMG pockets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9205), a 60° triangular geometry and a 0.8 mm corner radius for stable, productive turning of steel; order the insert directly via Metav Werkzeuge or contact our consultants for tailored process advice. TNMG160408 T9205 TNMG turning insert — Tungaloy, CVD-coated carbide, 60° TNMG160408 T9205 is an ISO-indexable turning insert designed for productive external and internal turning under stable conditions. CVD-coated carbide grade T9205 Suitable for productive steel turning Triangular 60° insert geometry Double-sided chipbreaker for chip control Faster, wear-resistant cutting for productive turning The T9205 grade combines a CVD-coated surface with a robust carbide substrate to extend tool life under elevated cutting speeds. The coating improves wear resistance and reduces crater wear, which helps maintain cutting-edge integrity during longer runs. For shops machining steel with good rigidity, this results in fewer interruptions for tool changes and more consistent cycle times. The insert’s design targets efficient material removal while offering predictable tool behaviour, which supports leaner production schedules and better process planning. Stable geometry and predictable surface finish A 60° triangular shape and a 0.8 mm corner radius provide a balance between edge strength and surface finish. The relatively large corner radius increases edge life and dampens vibration, making the grade suitable for heavier feeds where a robust cutting edge is required. The double-sided chipbreaker ensures repeatable chip formation and easy edge indexing, while the cylindrical hole enables secure clamping in ISO-compatible holders. These geometric features translate into consistently good surface quality and reduced scrap rates when the cutting parameters match machine and workpiece rigidity. Practical application guidance and material fit Designed primarily for turning steel in stable setups, the insert performs best when matched with an appropriate chipbreaker and stable fixturing. Use the indexable plate for both external and internal turning operations, selecting feeds and speeds that capitalise on the CVD-coated grade’s strength at higher cutting speeds. For difficult-to-machine alloys or unstable setups, select a different chip control or a softer grade; for standard steel components, the T9205 variant offers a cost-effective balance of productivity and wear resistance. For process optimisation or bespoke recommendations, technical consultation is available to align the insert choice with the machining strategy. Contact Metav Werkzeuge for precision advice and order processing on this Tungaloy turning insert; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for tailored support and rapid delivery arrangements Technical data Article number: 6785748-Tungaloy Manufacturer SKU: TUN6785748 Manufacturer article number: 6785748 SKU: 6785748-Tungaloy ISO designation: TNMG160408 Key dimensions Cutting angle: 60° Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Relief angle: 0° Materials & features Coating: T9205 (CVD) Material: carbide Chipbreaker: double-sided Hole: cylindrical hole Shape: triangular Application: turning Model series: ISO turning indexable inserts Compatibility: ISO-standard holders FAQ What materials is this insert best suited for? The Tungaloy TNMG160408 T9205 insert is optimised for machining steel; the CVD-coated grade provides wear resistance suitable for productive turning of steel under stable conditions. How many usable cutting edges does the insert have? The triangular shape and double-sided design provide multiple usable edges; the TNMG160408 T9205 insert can be indexed to present fresh cutting edges as required. Does the insert require a special clamping system? No special clamping is required; the TNMG160408 fits ISO-compatible external holders and uses the cylindrical hole for secure, repeatable clamping. How does the corner radius affect performance? A 0.8 mm corner radius increases edge strength and improves chip formation stability, which aids in achieving consistent surface finish and longer edge life at appropriate feeds. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when the holder geometry and setup provide the necessary rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9205 Wendeplatten - Tungaloy
Benefit from the T9205 CVD-coated carbide grade and the double-sided chipbreaker for productive turning of steel; the TNMG160408 insert combines high wear resistance and suitability for higher cutting speeds — order directly via Metav Werkzeuge or consult our specialists for holder matching. TNMG160408 T9205 Turning insert (TNMG 160408, Tungaloy) A TNMG160408 T9205 indexable insert engineered for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide grade T9205 Triangular TNMG 16 mm form 0° clearance for stable cutting Double-sided chipbreaker for productivity Compatible with ISO turning holders High-performance grade for productive turning The insert uses a CVD-coated carbide substrate in the T9205 grade to deliver wear resistance and sustained edge life under higher cutting speeds. This composition is chosen for productive turning where consistent performance and lower tool-change frequency reduce downtime. The coating improves tool life and supports longer, uninterrupted runs on medium to high-carbon steel, making the component economical in serial production and prototype runs. Geometry and holder compatibility for predictable results A triangular shape with a 16 mm size, 0.8 mm radius and 60° cutting angle provides a robust contact geometry that enhances rigidity and repeatability. The plate’s 4.76 mm thickness and 0° clearance contribute to stable cutting forces, while the cylindrical hole ensures secure clamping in standard ISO toolholders. These design choices translate into predictable chip flow and repeatable part quality when the insert is mounted in a correctly matched holder. Operational advantages and recommended applications With a double-sided chipbreaker, the insert offers two indexed cutting edges before replacement is required, lowering cost per cutting edge and simplifying stock management. It is intended primarily for turning operations on steel where stable clamping and consistent cutting parameters are maintained. The chipbreaker geometry supports efficient chip control, which improves surface finish and reduces interruptions caused by poor chip evacuation. Practical integration and economical use Indexable design and conformity to ISO dimensions make integration into existing tool systems straightforward, supporting fast changeovers and consistent set-up. The combination of system compatibility and a robust coating reduces rework and variance between batches. For best results, select a holder that matches form, clearance angle and tolerance class; Metav Werkzeuge can advise on clamping sets and replacement screws to ensure assembly reliability. Consult Metav Werkzeuge for application-specific guidance and to procure Tungaloy TNMG160408 inserts in grade T9205 — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785671-Tungaloy Manufacturer item number: 6785671 Manufacturer SKU: TUN6785671 Model series: ISO-Drehwendeschneidplatten Label: TNMG160408 T9205 Tungaloy-Wendeplatte Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Hole: with hole Features & applications Material: carbide Coating / grade: T9205 (CVD-coated) Plate form: triangular Chipbreaker: double-sided Intended use: turning Hole style: cylindrical hole FAQ What machining tasks suit this insert best? The TNMG160408 T9205 insert is best suited for productive external and internal turning of steel under stable clamping and cutting conditions. How many usable edges does the insert provide? Thanks to the double-sided chipbreaker, the Tungaloy TNMG160408 offers two indexed cutting edges per side, allowing multiple repositions before replacement. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; use ISO turning toolholders designed for TNMG 160408 geometry. What benefits does the T9205 grade deliver? The CVD-coated T9205 grade improves wear resistance and supports higher cutting speeds, extending edge life and stabilising productivity on steel. Is this insert suitable for finishing and roughing? The T9205 grade and chipbreaker can be applied for a range of turning operations; choose the chipbreaker and cutting parameters according to the desired surface finish and material removal rate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Benefit from the TNMG160408 insert’s blend of CVD-coated carbide and a double-sided chipbreaker for consistent productivity and reliable surface finish in medium-steel turning; compatibility with ISO tooling systems simplifies tool changes and inventory. Order the TNMG160408 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160408 T9215 TNMG turning insert — CVD-coated carbide, 60° (Tungaloy) The TNMG160408 T9215 Tungaloy insert is an ISO-standard triangular turning insert for external and internal turning, optimised for medium-steel machining and designed to deliver a balance of wear resistance and fracture safety in continuous to slightly interrupted cuts. ISO-standard triangular insert, 60° CVD-coated carbide grade T9215 Double-sided chipbreaker, with hole 0.8 mm corner radius for medium steel Reliable productivity for medium-steel turning The Tungaloy grade T9215 combines a CVD-coated carbide substrate with a microstructure tuned for high wear resistance and dependable fracture toughness. This results in sustained cutting performance during continuous operations and when light interruptions occur, so production runs maintain cycle time and surface quality. Specifying this grade supports a favourable cost-per-edge ratio and reduces unscheduled tool changes, which is particularly valuable in batch and serial machining of medium-grade steel. Secure fit and ISO compatibility to speed tool changes Designed as an ISO-standard insert, the TNMG160408 follows established dimensional and geometric conventions so that holder selection and interchange are straightforward. Compatibility with a chosen holder is determined by insert form, rake angle, tolerance class, clamping method, size and thickness; matching these parameters with a suitable external holder or boring bar reduces set-up time and improves repeatability. The product is supplied as part of a system that includes the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, allowing predictable integration into existing tooling systems. Enhanced chip control and extended edge life The double-sided chipbreaker built into this insert delivers controlled chip formation for typical turning operations, helping to avoid entangling swarf and promoting consistent surface finishes. Combined with the 0.8 mm corner radius and the T9215 substrate, the insert shows a balanced response to cutting forces: reduced risk of edge chipping and stable flank wear progression. Choosing an appropriate chipbreaker and machining parameters for the workpiece material and machine stability enables longer edge life and fewer interruptions, translating into improved overall equipment effectiveness. For applications demanding consistent performance with medium steels, consider the Tungaloy T9215-grade TNMG160408 and contact Metav Werkzeuge for application guidance and availability. Technical Data Article number: 6772340 SKU: 6772340-Tungaloy Manufacturer SKU: TUN6772340 Model series: ISO turning indexable inserts Material: Carbide Core specifications Size: 16 mm Thickness: 4.76 mm Insert angle: 60° Corner radius: 0.8 mm Grade: T9215 Design and features Triangular insert form With cylindrical hole Double-sided chipbreaker CVD-coated carbide substrate For external and internal turning Compatibility depends on form, rake angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? The TNMG160408 T9215 Tungaloy insert is a first-choice grade for medium steel machining and performs well in continuous to slightly interrupted cuts. Can the insert be indexed to present fresh cutting edges? Yes, the insert is double-sided and triangular; the design allows indexing to use multiple cutting edges before replacement or reconditioning of the insert. How is compatibility with a holder ensured? Compatibility is achieved by matching insert form, rake angle, tolerance class, clamping method, size and thickness—ensure the chosen holder accepts the TNMG160408 geometry and fastening arrangement. Is the T9215 grade suitable for high-productivity applications? The T9215 grade offers high wear resistance combined with fracture toughness, making the TNMG160408 appropriate for productive turning operations where consistent tool life is required. Which chipbreaker should be chosen for the best result? Select a chipbreaker that matches workpiece material, machining style and machine stability; the TNMG160408 is supplied with a double-sided chipbreaker to provide versatile chip control across common turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide in grade T9215 and ISO conformity for productive mid‑range steel turning, offering high wear resistance and good fracture toughness. Order the TNMG160408 T9215 insert directly via Metav Werkzeuge or consult our advisers for application support. TNMG 160408 T9215 ISO turning insert for medium‑steel turning — Tungaloy A TNMG 160408 T9215 is an ISO‑standard triangular turning insert designed for external and internal turning of medium steels, delivering a balance of wear resistance and toughness for continuous to lightly interrupted cuts. CVD‑coated carbide grade T9215 Optimised for medium steel turning Triangular ISO plate, 16 mm size Double‑sided with cylindrical hole Increase throughput with a wear‑resistant grade The T9215 grade is a CVD‑coated carbide developed to combine high wear resistance with reliable fracture toughness, making it a sound choice for productive turning of medium steels. By selecting this grade, production benefits from longer tool life under stable cutting conditions and fewer tool changes, which directly improves machine uptime and lowers per‑part cost. The CVD coating creates a hard, thermally stable surface that reduces adhesion and abrasion in typical steel turning operations. Robust geometry for repeatable results The insert features a triangular plate form with an included angle of 60°, a 0.8 mm corner radius, and a plate thickness of 4.76 mm, providing a stable cutting edge and predictable chip flow. The double‑sided design and cylindrical hole with secure clamping allow economical use of both cutting edges and straightforward indexing. Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening and plate size, so the mechanical fit must be checked when integrating into an existing toolset. Practical guidance for machining and setup For turning tasks, choose a chipbreaker and grade that match the workpiece material and the type of cut: the T9215 is recommended for continuous to slightly interrupted cuts in medium steel where a balance of wear resistance and toughness is required. When cracking or edge chipping is likely due to interrupted cuts or unstable setups, consider a more fracture‑resistant geometry or reduced cutting parameters. Insertion into the tool system normally requires a matching outer holder or boring bar, a suitable shim/clamp set and replacement screws to ensure correct seat and repeatability. Clear advantages for workshop workflows Using an ISO‑standard insert simplifies inventory and material planning, since holders and spares conform to widely accepted dimensions. The plate’s combination of CVD coating, carbide substrate and standardised form supports consistent surface finish and dimensional control in serial production. For operations seeking productivity gains, the indexable plate offers quick edge changes and lower overall tooling costs compared with brazed or solid alternatives. For application advice tailored to specific machines or to place an order for Tungaloy inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — our technical advisors will recommend the optimal holder and chipbreaker for the intended turning task. Technical data SKU: 6796094-Tungaloy Manufacturer SKU: TUN6796094 Manufacturer item number: 6796094 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance (relief) angle: 0° Included angle: 60° Designs / Special features CVD‑coated carbide Grade T9215 Triangular plate form Double‑sided with cylindrical hole ISO‑standard turning insert Suitable for continuous to slightly interrupted cuts Application: turning (external and internal) System components: matching holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The TNMG160408 T9215 insert is specified for medium‑range steel machining; the T9215 grade balances wear resistance and toughness for steel turning. Is the insert reversible and indexable? Yes, the triangular plate is double‑sided and indexable, allowing reuse of multiple cutting edges before disposal. What is the corner radius and why does it matter? The insert has a 0.8 mm corner radius; this radius influences edge strength and surface finish—larger radii increase edge durability but may raise cutting forces. How is the insert secured in the holder? The TNMG160408 uses a cylindrical hole and is clamped into a matching ISO toolholder; compatibility depends on form, clearance, tolerance class, fastening and plate size. Can this insert handle interrupted cuts? The T9215 grade is intended primarily for continuous to slightly interrupted cuts; for heavily interrupted cutting, choose a more fracture‑resistant geometry or adjust cutting parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and ISO compatibility to increase uptime and throughput in medium steel turning operations; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMG 160408 T9215 ISO turning insert for turning — Tungaloy A TNMG160408 T9215 ISO-standard triangular turning insert optimised for productive external and internal turning of medium steels. CVD-coated carbide for wear resistance ISO TNMG 160408 triangular form 0.8 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole Precision, stability and predictable tool life The insert is engineered to deliver consistent cutting performance in medium steel machining. The CVD-coated carbide grade T9215 combines wear resistance with fracture toughness, which supports stable cutting at moderate to high cutting speeds and during light interruptions. For production environments seeking predictable tool life, this triangular insert offers repeatable edge geometry and robust cutting action, reducing the frequency of tool changes and improving overall process efficiency. Better chip control and higher productivity per edge A double-sided chipbreaker design and a centred cylindrical hole enable reliable clamping and effective chip formation for a wide range of turning operations. Because the chip former and grade are matched to the workpiece material and cutting conditions, chip evacuation is improved and surface finish is stabilised. The result is an insert that helps maintain machining rates while lowering the risk of built-up edge and unexpected downtime. Straightforward system integration for quick setup As an ISO-standard indexable insert, compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s triangular geometry with a 60° included angle and standard locating hole permits use in common TNMG-capable toolholders and boring bars. This standardisation simplifies tool inventory and reduces the need for specialised adapters. Geometry and handling designed for everyday workshop use Key geometric values provide operational clarity: 0.8 mm corner radius, 4.76 mm thickness, 16 mm inscribed circle, 0° relief angle and a 60° triangle form. These dimensions make the insert versatile for both external and internal turning tasks. The combination of a robust carbide substrate and CVD coating allows for productive machining under continuous to slightly interrupted cuts, while the double-sided layout extends the number of usable edges per insert. Contact Metav Werkzeuge for tailored advice on Tungaloy TNMG160408 inserts, availability and matching holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772314 SKU: 6772314-Tungaloy Manufacturer SKU: TUN6772314 Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Triangle included angle: 60° Special features Coating / grade: T9215 (CVD-coated carbide) Material: carbide Application: turning Chipbreaker: double-sided Hole: with cylindrical hole Plate form: triangular Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The Tungaloy TNMG160408 T9215 insert is intended primarily for medium steel machining; the T9215 grade blends wear resistance and toughness for productive turning. How many cutting edges are available per insert? The triangular, double-sided design provides multiple usable edges; rotating the insert to fresh corners extends service life before replacement. Which toolholders are compatible with this insert? Compatibility is determined by the ISO TNMG specification — form, clearance angle, tolerance class, fastening, size and thickness must match the holder; common TNMG holders accommodate the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture control and proven compatibility with ISO toolholders to keep turning processes productive and consistent; order the insert directly via Metav Werkzeuge or consult the product specialists for application-specific advice. TNMG 160408 T9215 ISO indexable turning insert — Tungaloy The TNMG160408 T9215 is an ISO-standard triangular indexable insert designed for efficient external and internal turning of medium-grade steel. CVD-coated carbide for high wear resistance Optimised for medium steel and productive turning Triangle shape with 0.8 mm corner radius High-performance coating for sustained cutting life The CVD-coated cemented carbide substrate delivers a measurable increase in cutting life compared with uncoated grades. Thanks to the T9215 coating, the insert combines elevated wear resistance with robust fracture resistance, making it suitable for prolonged production runs. This balance reduces unexpected tool changes and supports stable component quality over batches, so machining cycles remain predictable and downtime is minimised. Productivity through geometry and chip control A triangular plate with a 0.8 mm corner radius and a 60° included angle offers a compact cutting edge that supports higher feeds without sacrificing surface finish. The double-sided chipbreaker design provides repeatable chip formation for continuous to slightly interrupted cuts, improving cycle times and lowering scrap rates. These geometric choices translate into fewer tool indices and a more economical turning process overall. Compatibility and secure clamping for safe operation Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO conformity of this insert ensures straightforward selection for most external holders and boring bars. The insert comes with a cylindrical hole, enabling positive location and clamping in standard assemblies. Clear understanding of these mounting parameters aids reliable seating and torque transfer, reducing the risk of vibration and unexpected edge failure. Guidance for application and process setup Designed as a first choice for medium steel, the grade is optimised for high-productivity scenarios with continuous to slightly interrupted cuts. When selecting cutting parameters, favour stable setups and adjust feed to the chosen corner radius to balance tool life and surface quality. Where finish is critical, the T9215 coating helps maintain edge integrity and consistent surface results over longer tool life, supporting predictable outputs for production environments. For availability and technical ordering of the Tungaloy TNMG 160408 T9215 indexable insert, contact Metav Werkzeuge for tailored advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772345 Manufacturer SKU: TUN6772345 Label: TNMG160408 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Material: cemented carbide Coating: T9215 (CVD) Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: medium steel turning Suitable for continuous to slightly interrupted cuts FAQ What material is this insert best suited for? The TNMG160408 T9215 insert is optimised for medium steel applications, where the T9215 grade balances wear resistance and fracture toughness. Does the insert fit standard ISO holders? Yes, the plate follows ISO geometry; compatibility is determined by form, relief angle, tolerance class, fastening and size, so matching those parameters ensures correct fit. How many usable cutting edges are available per insert? With a triangular, double-sided design, the insert provides multiple indexed edges; the exact number depends on the specific indexing method used by the holder assembly. What is the significance of the 0° relief angle? A 0° relief angle indicates a neutral clearance suitable for many general turning operations, contributing to stable engagement and consistent edge support during cutting. Is the insert suitable for slightly interrupted cuts? Yes, the T9215 grade and the plate geometry are designed to perform reliably in continuous to slightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high productivity, reliable wear resistance and precise cutting geometry for efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. TNMG 160408 T9215 Turning Insert – Tungaloy (ISO turning insert, triangular, 60°) TNMG160408 T9215 is a precision indexable insert for turning applications, engineered for medium steel machining with a CVD-coated carbide grade optimised for durability and fracture resistance. ISO-standard triangular insert CVD-coated carbide grade T9215 0.8 mm corner radius for stable cutting Double-sided chipbreaker with cylindrical hole Exceptional performance for medium steel turning The CVD-coated carbide in grade T9215 provides a balanced combination of wear resistance and edge toughness, making this insert especially suitable for medium steel applications. Thanks to the coating and substrate pairing, the component sustains higher cutting speeds and delivers consistent tool life under continuous to lightly interrupted cutting conditions. This results in fewer tool changes and a measurable improvement in process efficiency for batch production and series turning. Precise geometry for repeatable part quality With a 60° cutting geometry and a 0.8 mm corner radius, the triangular design promotes stable insert seating and consistent chip formation. The insert thickness of 4.76 mm contributes to a rigid cutting edge that resists bending and chipping, which supports tighter dimensional tolerances. The ISO-compliant form simplifies selection of a matching holder: correct fit is determined by insert shape, free angle, tolerance class, fixing method, size and thickness, ensuring predictable results across different machines. Chip control and machinability advantages The double-sided chipbreaker and central cylindrical hole support reliable clamping and efficient chip evacuation in a wide range of feed rates. Effective chip control reduces rubbing and heat build-up at the cutting zone, which enhances surface finish and extends effective tool life. For operations that alternate between continuous and slightly interrupted cuts, this cutting geometry offers improved stability and repeatable cutting forces, translating into higher productivity per shift. Practical compatibility and application guidance Designed for turning, the insert integrates readily into standard ISO-based tool systems. Inspection of holder compatibility—form, free angle (0° specified), tolerance and fixing—ensures safe clamping and repeatable seating. The grade combines productive cutting behaviour with robustness against edge breakage, making the insert a sound choice for workshops seeking a cost-effective balance between performance and lifetime under normal production loads. Contact Metav Werkzeuge for expert advice on integrating the Tungaloy turning insert into current tooling systems and to order replacements or compatible holders Technical Data Article number: 6772320 Manufacturer SKU: TUN6772320 SKU: 6772320-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Free angle: 0° Special features Grade: T9215 CVD-coated carbide Triangular insert, double-sided Cylindrical hole for clamping Suitable for turning of medium steel ISO‑standard insert form FAQ What materials is this insert designed for? The TNMG160408 T9215 indexable insert is intended primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for productive turning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius gives a stronger cutting edge and improved surface finish compared with sharper radii, while still allowing reasonable feed rates for turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions, but compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; verify those parameters before installation. Can this insert handle interrupted cuts? The CVD-coated carbide T9215 is suitable for continuous to slightly interrupted cuts; severe interruptions may require a different grade or geometry. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker and cylindrical hole ensure reliable clamping and controlled chip formation, improving chip evacuation, surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, predictable edge life and ISO compatibility for reliable, productive turning operations; order the TNMG160408 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 T9215 Triangle ISO turning insert by Tungaloy — CVD-coated carbide, 60° geometry A TNMG160408 T9215 triangle ISO turning insert designed for external and internal turning in medium steel machining, offering a robust cutting edge and standardised fit for ISO toolholders. CVD-coated carbide for wear resistance 60° triangle shape, 16 mm cutting size 0.8 mm corner radius for robust edge Double-sided insert with cylindrical hole High productivity with a grade optimised for medium steel The combination of a CVD-coated carbide substrate and the T9215 grade delivers a clear productivity advantage in medium steel turning. The coating increases abrasive wear resistance while the substrate maintains fracture toughness; this balance supports longer cutting intervals under continuous to slightly interrupted cutting conditions. In practice, this means fewer indexings and reduced tool changes, helping to keep cycle times down and machine uptime high. This insert is particularly suited to operations where repeatable performance and high material removal rates are required. Consistent cutting geometry for reliable results A stable geometry reduces variability at the cutting edge: the 60° triangle format and a 0.8 mm corner radius provide a predictable contact area and increased edge strength compared with sharper radii. The insert is double-sided and features a cylindrical central hole for secure clamping; the 4.76 mm thickness contributes to rigidity under load. These measurable parameters support repeatable part quality and surface finish, while the standardised ISO form ensures the insert seats correctly in holders designed for the TNMG160408 format. Seamless integration into ISO tool systems The insert is part of a conventional ISO system: an indexable turning plate together with a compatible external holder or boring bar, a locating shim/clamping set and replacement screws. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, so holders specified for TNMG 160408-type inserts will accept this component without modification. Using a standardised insert streamlines inventory and simplifies retooling, which translates into lower administrative overhead and faster setup times on the shopfloor. Why the T9215 grade and CVD coating matter The T9215 designation identifies a CVD-coated carbide combination optimised as a first choice for medium steel machining. The coating provides a protective barrier against built-up edge and abrasive wear, while the substrate offers sufficient toughness to resist chipping during moderate interruptions. As a result, the insert promotes consistent tool life and predictable replacement intervals, supporting process stability and cost-efficiency over production runs. For applications prioritising both wear resistance and breakage safety, this grade offers a balanced solution. For tailored grade selection and fast supply of Tungaloy TNMG160408 T9215 inserts, contact Metav Werkzeuge (info@metav-werkzeuge.com, +49 2822 7131930) to discuss holder compatibility and delivery options Technical data Article number: 6772338 Manufacturer SKU: TUN6772338 Item name: TNMG160408 T9215 Tungaloy insert Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.8 mm Relief/clearance angle: 0° Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Geometry angle: 60° Hole: cylindrical central hole Chipbreaker: double-sided Special features Coating/grade: T9215 (CVD-coated carbide) Typical application: external and internal turning Suitability: medium steel machining; continuous to slightly interrupted cuts System composition: ISO insert, compatible outer holder or boring bar, shim/clamping set, spare screws Compatibility factors: form, relief angle, tolerance class, fastening, size and thickness FAQ What workpiece materials is this insert best suited for? The TNMG160408 T9215 insert by Tungaloy is optimised for medium steel machining and performs well in continuous to slightly interrupted turning operations. What are the key dimensions and geometry of the insert? Key values: 16 mm inscribed circle, 60° triangle geometry, 0.8 mm corner radius, 4.76 mm plate thickness and a cylindrical central hole; these data describe the TNMG160408 T9215 turning insert. Is the insert indexable and how is it clamped? The insert is double-sided and designed for indexing; it is secured via the central cylindrical hole and clamping hardware compatible with ISO TNMG 160408-style holders. Which holders are compatible with this insert? Holders designed for TNMG 160408 ISO inserts that match form, relief angle, tolerance class, fastening method, size and thickness will be compatible with this Tungaloy grade. What advantage does the T9215 CVD coating provide? The T9215 CVD-coated carbide offers improved abrasive wear resistance with maintained fracture toughness, delivering longer edge life and stable performance in medium steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com