TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 combination of high wear resistance, fracture toughness and ISO compatibility to increase throughput in medium-steel turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG 160408 T9215 turning insert (ISO) – Tungaloy A TNMG160408 T9215 ISO insert for efficient external and internal turning, optimised for medium steel machining and continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Optimised for medium steel productivity ISO TNMG triangular 60° geometry Double-sided with 0.8 mm corner radius Increased productivity through robust coating and grade The T9215 CVD-coated carbide grade combines high wear resistance with reliable fracture toughness, which translates into longer tool life and fewer indexings during production. For shops machining medium-strength steels, this results in a measurable rise in productivity under continuous to lightly interrupted cutting regimes. The coating reduces flank wear and maintains cutting-edge integrity, enabling consistent part quality and less frequent insert changes. Clear compatibility reduces setup uncertainty Supplied as an ISO-compliant triangular insert, compatibility with a toolholder depends on the insert’s form, clearance angle, tolerance class, fastening and thickness. The 0° relief specification and standard TNMG form make holder selection straightforward when matched against ISO holder drawings. Specifying these measurable parameters prevents costly mismatches and shortens setup times on the shop floor, improving process reliability. Geometry and mounting designed for versatile turning The triangular shape with a 60° included angle, double-sided chipbreaker and a 0.8 mm corner radius (rounded cutting edge) offers balanced cutting performance for finishing and semi-finishing passes. The insert is supplied with a cylindrical hole, facilitating secure clamping in both external holders and boring bars. This geometry provides repeatable positioning and stable cutting conditions, which helps to sustain surface finish and dimensional accuracy. System approach and recommended applications As part of the ISO turning-plate system, the insert complements the appropriate external holder or boring bar, underlay/ clamp set and spare screws for a complete tooling solution. With a plate thickness of 4.76 mm, size 16 and sturdy carbide substrate, the component is especially suitable for turning tasks in medium steel where a balance of wear resistance and breakage safety is required. Selecting the correct chipbreaker and matching the grade to the workpiece stability will deliver the greatest process economy. Contact Metav Werkzeuge for tailored advice on using the Tungaloy TNMG160408 T9215 insert in specific turning applications; Metav Werkzeuge can support selection, availability and logistics at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6772344 SKU: 6772344-Tungaloy Manufacturer SKU: TUN6772344 Model series: ISO-Drehwendeschneidplatten Application: turning Facts Grade: T9215 Material: carbide Geometry: TNMG 160408 (triangular, 60°) Corner radius: 0.8 mm Thickness: 4.76 mm Special features CVD coating on carbide substrate Double-sided chipbreaker Cylindrical hole for clamping 0° relief angle Suitable for continuous to light interrupted cuts FAQ What materials is this insert recommended for? The TNMG160408 T9215 insert is recommended for medium steel machining; the T9215 grade and CVD-coated carbide substrate provide wear resistance and toughness suited to such materials. Is this insert compatible with standard TNMG holders? Compatibility depends on holder form, clearance angle, tolerance and clamp design; the insert follows ISO TNMG geometry so it is compatible with standard TNMG holders when those parameters match. Can the insert be used for internal as well as external turning? Yes, the triangular TNMG form with a cylindrical hole and double-sided chipbreaker allows use in both external holders and boring bars for internal operations. How does the corner radius affect surface finish? A 0.8 mm corner radius provides a compromise between strength and finish, improving edge robustness while maintaining a good surface on semi-finishing and finishing passes. What cutting conditions suit this grade best? The T9215 grade is intended for productive machining of medium steels under continuous to slightly interrupted cuts; select a chipbreaker and feed that match workpiece stability for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance, the ISO TNMG 160408 geometry for reliable compatibility with ISO holders, and the versatile 0.8 mm nose radius for consistent surface finish and productivity; order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. TNMG 160408 T9215 turning insert — Tungaloy, CVD-coated carbide The TNMG160408 T9215 is an ISO‑norm triangular indexable insert designed for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 ISO TNMG 160408 triangular format 0.8 mm nose radius for versatility Double-sided chipbreaker, hole-mounted High-performance carbide grade for sustained productivity The T9215 grade is a CVD‑coated carbide engineered for the demands of medium‑steel machining, combining elevated wear resistance with reliable fracture toughness. This composition allows for higher material removal rates under continuous or lightly interrupted cutting conditions, reducing tool changes and improving overall throughput. As a result, machining cycles become more predictable and the economic efficiency of production increases without compromising edge integrity. Precision geometry for consistent fit and surface quality The ISO TNMG 160408 geometry ensures compatibility with standard indexable holders when form, 0° relief angle, tolerance class, fastening method, size and thickness are matched. The triangular format with a 60° included angle and a plate thickness of 4.76 mm provides stable support in the pocket, while the 16 mm inscribed size and cylindrical hole permit secure mounting. These geometry features contribute to repeatable positioning, consistent cutting engagement and a controlled surface finish during external and internal turning operations. Effective chip control and adaptable cutting performance Equipped with a double‑sided chipbreaker and a 0.8 mm corner radius, the insert offers efficient chip formation across a range of cutting parameters. The chipbreaker design promotes predictable chip flow and reduces recutting, which helps to maintain surface integrity and tool life. The modest nose radius delivers a balance between edge strength and fine surface finish, making the insert suitable for finishing passes as well as medium‑duty roughing when process conditions demand consistent results. Straightforward system integration and maintenance benefits The insert forms part of a simple system build: an ISO indexable insert, a matching external holder or boring bar, an underplate/clamp set and spare screws for fast replacement. The cylindrical hole style enables reliable clamping and straightforward indexing of the two usable cutting edges, lowering downtime during tool changes. For assemblies where holder choice and tolerance classes matter, compatibility is determined by form, relief angle, tolerance and thickness, which supports predictable integration into existing tool sets and aids tool‑life planning. For application advice or to confirm availability of the Tungaloy TNMG160408 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and quote SKU TUN6773935 Technical data Article number: 6773935 Manufacturer SKU: TUN6773935 Item label: TNMG160408 T9215 Tungaloy insert Brand: Tungaloy Model series: ISO turning indexable inserts Core data Inscribed circle / size: 16 mm Corner radius: 0.8 mm Plate thickness: 4.76 mm Included angle: 60° Relief angle: 0° ISO designation: 160408 Special features CVD‑coated carbide grade T9215 Triangular, double‑sided insert Cylindrical hole for secure mounting Double‑sided chipbreaker Suited for medium steel machining Designed for continuous to slightly interrupted cuts FAQ What materials is this insert most suitable for? The TNMG160408 T9215 insert is optimised for medium steel machining; the T9215 grade delivers high wear resistance and fracture toughness for productive turning of steel components. How many cutting edges are available per insert? The triangular, double‑sided design provides two usable cutting edges per side, allowing multiple indexings before disposal of the insert. Which holder characteristics must be checked for compatibility? Compatibility is determined by holder form, 0° relief angle, tolerance class, fastening method, size and plate thickness; matching these parameters ensures correct seating of the TNMG160408 insert. Is the insert suitable for interrupted cuts? Yes, the T9215 grade is engineered to tolerate light interruptions while maintaining edge stability and wear resistance in medium steel applications. How is the insert mounted in the toolholder? The insert uses a cylindrical hole and is secured with the appropriate clamp set or underplate and screw arrangement for stable clamping and rapid index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide grade and the 0.8 mm nose radius for productive, reliable turning of medium steel; the ISO TNMG form and cylindrical-hole fixing ensure secure clamping and easy insert changeover. Order directly via Metav Werkzeuge or consult its advisors for application-specific recommendations. TNMG 160408 T9215 turning insert for turning – Tungaloy, CVD-coated carbide, 0.8 mm radius A TNMG160408 T9215 insert designed for external and internal turning of medium steel, combining wear resistance and fracture security for continuous to lightly interrupted cuts CVD-coated carbide T9215 grade Optimised for medium steel machining 0.8 mm nose radius, 60° triangle insert Double-sided, cylindrical hole for secure clamping Consistent productivity through CVD-coated carbide The combination of CVD-coated carbide and the T9215 grade delivers high wear resistance while maintaining breakage security, which benefits production runs with extended cutting times. The coating stabilises the cutting edge at elevated temperatures and reduces flank wear, so tool-change intervals are extended and process reliability improves. This results in fewer interruptions and a measurable increase in machining uptime when turning medium steel components. Precise geometry for repeatable clamping and surface quality The ISO TNMG form, with a 60° included angle and 0.8 mm nose radius, is manufactured to standard tolerances so that compatibility with holders is ensured by form, clearance angle, tolerance class, fastening, size and thickness. The cylindrical hole and 4.76 mm thickness provide secure location in clamping systems, reducing micro-movement under load and supporting repeatable part-to-part surface finish. For operations where dimensional consistency matters, this geometry supports low-vibration cutting and predictable finishing. Controlled chip formation and flexible use across turning tasks Equipped with a double-sided chipbreaker, the insert offers two usable edges and reliable chip control in a range of turning conditions. The chipformer is tuned to the grade and to typical cutting modes, which helps to evacuate swarf cleanly and maintain tool life in continuous and light interrupted cuts. In practice, the insert is part of a system that includes a matching external holder or boring bar, a backing shim/clamp set and spare screws, enabling quick replacement and minimising downtime. Contact Metav Werkzeuge for tailored application advice on the Tungaloy TNMG160408 T9215 insert and to discuss suitable holders, cutting parameters and fast delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773957 Manufacturer SKU: TUN6773957 SKU: 6773957-Tungaloy Designation: TNMG160408 Full article name: TNMG160408 T9215 Tungaloy-Wendeplatte Model series: ISO turning inserts Core data Nose radius: 0.8 mm Thickness: 4.76 mm Size: 16 mm Included angle: 60° Relief/clearance angle: 0° Hole: with hole Hole style: cylindrical hole Special features Coating / grade: T9215 (CVD-coated carbide) Material: Carbide Plate shape: triangular Chipbreaker: double-sided Application: Turning System components: matching external holder or boring bar, backing shim/clamp set, spare screws Typical use: external and internal turning; continuous to light interrupted cuts FAQ What materials is this insert best suited to machine? The TNMG160408 T9215 insert is specified for medium steel machining; its T9215 CVD coating and carbide substrate balance wear resistance and toughness for productive turning. How many usable edges does the insert provide? The insert is double-sided with a chipbreaker on both faces, offering two usable cutting edges before indexing or replacement is required. Does the insert require a specific holder design? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; a holder matching the ISO TNMG form and the cylindrical-hole clamping is required for secure mounting. What advantages does the CVD coating bring for turning operations? The CVD-coated T9215 grade increases heat and wear resistance at the cutting edge, extending edge life and supporting higher cutting speeds in continuous to lightly interrupted turning. Can the insert be used for internal turning as well as external turning? Yes; the geometry and chip control features make the insert suitable for both external and internal turning when paired with an appropriate boring bar or internal-holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a double-sided chipbreaker and a 60° triangular geometry for reliable, productive turning of medium steels — order directly via Metav Werkzeuge or request application advice from our consultants. TNMG160408 T9215 triangular turning insert for turning — Tungaloy TNMG160408 T9215 is a triangular, ISO-compliant indexable insert designed for external and internal turning in medium steels, offering a balance of wear resistance and fracture toughness. CVD-coated carbide for medium steel Double-sided chipbreaker for reliable chip control 60° triangular form for strong cutting edges 0.8 mm corner radius for improved surface finish Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 delivers a combination of wear resistance and fracture toughness, making it suitable for continuous to lightly interrupted cuts in medium-strength steel. The coating provides a hard sliding surface that reduces flank wear, while the substrate offers the toughness required under varying cutting forces. This results in higher productivity and more predictable tool-change intervals compared with uncoated grades. Secure clamping and wide holder compatibility Designed to the ISO TNMG series, the insert’s compatibility with a holder is governed by its form, clearance angle, tolerance class, attachment method, size and thickness. The cylindrical hole enables secure mechanical clamping and simple replacement; the 0° relief angle and 60° included angle ensure a robust seating for many standard triangular holders. Using a correctly matched holder preserves the cutting geometry and reduces vibration, supporting consistent component quality. Predictable tool life and improved surface quality A 0.8 mm corner radius provides a balance between strength and surface finish, helping to achieve smoother part faces without compromising edge stability. The 4.76 mm thickness increases rigidity at the cutting edge, reducing deflection on longer overhangs. The double-sided chipbreaker aids in chip control and evacuation, which supports machining continuity and safer handling. Overall, this indexable insert offers repeatable performance and a clear path to optimised cycle times in production turning. For tailored application recommendations or to source genuine Tungaloy turning inserts, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772306 Manufacturer SKU: TUN6772306 SKU: 6772306-Tungaloy Model series: ISO turning inserts Material: Carbide Grade/coating: T9215 (CVD-coated) Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Triangular insert (TNMG 160408) Double-sided chipbreaker Cylindrical hole for mechanical clamping ISO-compliant geometry Suited to external and internal turning Optimised for medium steel machining FAQ Which materials is this insert best suited for? The TNMG160408 T9215 Tungaloy insert is specified for medium-steel machining, combining T9215 coating and a carbide substrate to balance wear resistance and toughness for continuous to light interrupted cuts. How is holder compatibility determined? Compatibility depends on the insert form, clearance angle, tolerance class, attachment, size and thickness; the TNMG160408 must be paired with a matching 60° triangular holder and suitable clamping for inserts with a cylindrical hole. Can this insert be used for finishing passes? Yes — the 0.8 mm corner radius and rigid 4.76 mm thickness help achieve improved surface finishes while maintaining edge strength for finishing and semi-finishing operations. Is the insert indexable on both sides? The TNMG160408 T9215 is double-sided with a double-sided chipbreaker, allowing indexing to a fresh cutting edge to extend tool life and reduce tooling costs. What is the coating and how does it help? The insert is a CVD-coated carbide in grade T9215; the coating reduces abrasive wear and the carbide substrate provides the toughness needed to withstand variable cutting forces in steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a durable 60° triangular geometry and a 0.8 mm corner radius for dependable medium-steel turning and high productivity. Order the TNMG160408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160408 T9215 — ISO turning insert for medium steel by Tungaloy TNMG160408 T9215 indexable insert for general turning applications, developed for continuous to mildly interrupted cuts in medium steel with a robust CVD-coated carbide grade. ISO 60° triangular geometry CVD-coated cemented carbide grade T9215 0.8 mm corner radius for robust cutting Double-sided insert with cylindrical hole Raise throughput with a balanced carbide grade and coating The combination of CVD-coated cemented carbide in grade T9215 targets a balance of wear resistance and fracture toughness, making this insert well suited to sustained production environments. The material pairing reduces flank and crater wear under typical turning speeds, which in turn maintains dimensional accuracy for longer tool life. For machining medium steels, this technical choice supports higher cutting lengths between indexings and minimises unexpected downtime, contributing to a predictable process flow and lower unit costs. Consistent surface quality through precise geometry The 60° triangular geometry and 0.8 mm corner radius ensure stable engagement with the workpiece, which benefits both external and internal turning operations. This geometry delivers repeatable cutting forces and helps achieve consistent surface finishes, even when the cutting edge is indexed several times. The double-sided design doubles the available cutting edges per insert, increasing value-per-edge and reducing tool-change frequency. Where parts require tight tolerances, the insert's defined relief angle and standardised form support reproducible results across batches. ISO compatibility for flexible toolset integration Designed as an ISO-standard turning insert, the TNMG160408 fits a broad range of compatible external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, clamping style, size and thickness; however, using ISO-matched components simplifies inventory and reduces setup time. The intended system build-up comprises the insert, a matching external holder or bar, a shim/clamp set and replacement screws, offering a coherent assembly that supports quick insert changes and secure clamping for stable cutting conditions. Practical guidance for process selection and applications The insert is primarily aimed at medium-steel turning in continuous to slightly interrupted cuts; selecting the correct chipbreaker and grade for the workpiece and machining stability is essential. For roughing, a more positive feed and robust holder minimise vibration, while finishing passes benefit from reduced feeds and conservative depths to exploit the insert’s surface-quality potential. The indexable nature of the component means edges can be rotated to present fresh geometry, extending productive life and enabling efficient shop-floor practices. For application consultation, supply or to request a tailored cutting suggestion for the TNMG160408 T9215 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants available to discuss integration and process parameters Technical Data Manufacturer article number: 6944816 SKU: 6944816-Tungaloy Manufacturer SKU: TUN6944816 Label: TNMG160408 T9215 Tungaloy-Wendeplatte Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Hole: with cylindrical hole Double-sided design Material and Features Cemented carbide CVD-coated grade T9215 For medium steel turning ISO triangular insert TNMG160408 Double-sided chipbreaker System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The TNMG160408 T9215 insert is specified for medium steel machining; its CVD-coated carbide composition offers the wear resistance and toughness suited to that material class. Is the insert indexable and how many cutting edges are available? This is a double-sided, triangular indexable insert providing multiple cutting edges; the geometry and double-sided design extend edge life before replacement is required. Which holders are compatible with this ISO insert? Compatibility requires matching form, relief angle, tolerance class, clamping method, size and thickness; the TNMG160408 follows ISO standards so it integrates with holders designed for TNMG 160408 inserts. Can the insert be used for interrupted cuts? Yes; the grade T9215 combines toughness and wear resistance that allow use in continuous to mildly interrupted cutting conditions, depending on the stability of the setup. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius improves edge robustness and helps maintain surface finish under moderate cutting forces, aiding dimensional consistency and reducing edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
The combination of CVD‑coated carbide (T9215) and a 0.8 mm corner radius delivers a robust balance of wear resistance and fracture toughness for continuous to slightly interrupted turning operations; order the insert directly via Metav Werkzeuge or consult the team for application support. TNMG160408 T9215 — ISO turning indexable insert, triangular 60° geometry (Tungaloy) The TNMG160408 T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning of medium steels, providing predictable engagement and repeatable results in productive machining setups. ISO‑standard triangular shape CVD‑coated carbide grade T9215 0.8 mm corner radius for stable cutting Double‑sided with cylindrical hole Improve throughput with material‑matched wear resistance The CVD‑coated carbide grade T9215 is optimised for medium steel machining, combining elevated wear resistance with controlled toughness to reduce edge chipping. This results in fewer index changes and longer productive cycles, which supports higher machine uptime and reduced tooling costs. The textural properties of the coating enable consistent surface finish while maintaining tool life under continuous or lightly interrupted cuts. Predictable geometry for straightforward machine integration A triangular insert with a 60° included angle, 0° rake, and a 0.8 mm corner radius offers a reliable cutting edge that fits ISO holders when form, thickness and tolerance class match. The central cylindrical hole facilitates secure clamping and quick replacement, while the nominal thickness of 4.76 mm provides the rigidity needed for stable cutting in typical turning applications. These geometric attributes simplify tool selection and reduce setup variability in production environments. Consistent chip control and application focus Equipped with a double‑sided chipbreaker, the insert supports effective chip formation and evacuation across a range of feeds and depths of cut, improving process security and surface quality. The combination of insert geometry, chipbreaking and CVD coating makes the grade particularly suitable for manufacturers seeking a dependable solution for medium‑range steel components, where repeatability and tool life are decisive factors. For high‑productivity medium steel turning, specify the Tungaloy T9215 grade and contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772312 Manufacturer SKU: TUN6772312 SKU: 6772312-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Grade: T9215 Material: carbide Corner radius: 0.8 mm Included angle: 60° Free angle (rake): 0° Thickness: 4.76 mm Special features Triangular plate shape Double‑sided chipbreaker Cylindrical central hole for clamping ISO‑standard geometry for compatibility Suited to continuous to slightly interrupted turning Targeted application: medium steel machining FAQ What material range is this insert intended for? The Tungaloy TNMG160408 T9215 insert is intended primarily for medium steel machining, where the CVD‑coated carbide grade T9215 balances wear resistance and toughness. Can the insert be used for interrupted cuts? Yes, the geometry and T9215 grade render the insert suitable for continuous to slightly interrupted cuts; heavily interrupted conditions may require a different grade or geometry. How does the double‑sided chipbreaker benefit production? The double‑sided chipbreaker promotes controlled chip formation and evacuation, supporting consistent surface finish and process stability during turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the grade's combination of CVD-coated carbide and robust chip control for reliable productivity in medium steel turning; compatibility with ISO holders ensures quick indexable insert changes and steady production flow. Order the insert via Metav Werkzeuge or consult the technical team for application matching and stock availability. TNMG 160408 T9215 triangular indexable insert for turning, CVD-coated carbide, double-sided chipbreaker — Tungaloy The TNMG160408 T9215 is an ISO-indexable turning insert designed for medium steel machining, providing a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide for increased wear resistance Suitable for medium steel machining Double-sided chipbreaker for versatile cuts ISO TNMG 16 × 4.76 mm, 0° relief Longer tool life through a wear-resistant grade The insert's core advantage is the T9215 CVD-coated carbide grade, which delivers a measurable improvement in wear resistance while maintaining edge toughness. For medium-steel turning operations this means fewer indexings and longer effective tool life under continuous and lightly interrupted cutting conditions. The material combination reduces flank wear progression and supports consistent component quality, which in turn lowers tooling-related downtime and contributes to predictable production cycles. ISO conformity and geometry for quick holder compatibility Built to ISO standards, the triangular geometry with a 60° included angle and a 16 mm inscribed circle gives a repeatable, compact cutting edge suitable for a wide range of external and internal turning tasks. The insert thickness of 4.76 mm, corner radius 0.8 mm, 0° relief angle and the cylindrical locating hole ensure dimensional compatibility with standard external holders and boring bars. The double-sided chipbreaker provides two usable cutting edges per side, making the insert economical in inventory management and straightforward to replace during shifts, provided the holder matches form, clearance angle, tolerance class, fastening and size. Practical machining benefits and selection guidance For stable chip control and reliable surface finish on medium steels, select the chipbreaker and grade according to workpiece material, machining type and assembly rigidity. The grade is optimised for productive turning where consistent edge integrity is required; it performs well in finishing and medium-depth roughing when machine setup is rigid and coolant application is appropriate. When specifying tooling, pair the insert with a holder that matches the ISO form and ensures correct rake and clearance; this preserves the insert's wear performance and maintains repeatable results across production batches. Contact Metav Werkzeuge for tailored application advice and availability of the TNMG160408 T9215 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6788888 Manufacturer: Tungaloy Manufacturer item no.: 6788888 SKU: 6788888-Tungaloy Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Locating hole: with cylindrical hole Features & applications Carbide substrate, CVD-coated grade T9215 Double-sided chipbreaker Triangular indexable insert ISO turning insert system Suitable for medium steel machining For continuous to light interrupted cuts Compatible with standard external holders and boring bars FAQ What materials is this insert suitable for? The TNMG160408 T9215 insert is specified for medium steel machining and offers a balance of wear resistance and toughness suited to continuous and slightly interrupted turning operations. How many cutting edges are available per insert? Thanks to the double-sided chipbreaker and triangular form, the insert provides multiple usable edges, which improves cost-efficiency in machining cycles. Which holder characteristics determine compatibility? Compatibility depends on holder form, clearance (free) angle, tolerance class, fastening method, size and thickness; the insert is ISO-conformant for easy matching with standard holders. What benefits does the T9215 grade deliver on the shop floor? The T9215 CVD-coated grade extends tool life through improved wear resistance while maintaining edge strength, supporting higher productivity and consistent surface finishes. Is this insert suitable for interrupted cuts? The grade and geometry are designed for continuous to light interrupted cuts; for heavy interruptions a different geometry or tougher grade should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that combines high wear resistance with breakage safety for efficient medium‑steel turning; the ISO compatibility and standard triangular form ensure quick changeover and predictable performance. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160408 T9215 Tungaloy — ISO turning insert, CVD‑coated carbide, 60° triangular The TNMG160408 T9215 Tungaloy is an ISO‑standard triangular carbide insert designed for external and internal turning, offering a balance of wear resistance and fracture toughness for productive, continuous to slightly interrupted cutting. CVD‑coated carbide grade T9215 60° triangular insert, 16 mm size 0.8 mm corner radius for robust finishes Double‑sided chipbreaker, with cylindrical hole Reliable cutting performance for medium‑steel production The CVD‑coated carbide composition and T9215 grade were developed for medium steel machining where a combination of wear resistance and fracture toughness matters. This specification supports sustained productivity in continuous and lightly interrupted cuts by delaying flank and crater wear while maintaining edge stability. The coating improves thermal resistance and reduces adhesion, which translates into longer effective tool life and fewer insert changes, helping to keep cycle times predictable and production costs controlled. Geometry that reduces setup time and improves repeatability Designed to the ISO standard, the triangular 60° form with 16 mm nominal size and 4.76 mm plate thickness enables straightforward compatibility checks with common external holders and boring bars. The insert features a cylindrical hole for secure clamping and a defined clearance angle that ensures consistent seating and repeatable offsets. Because compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness, choosing ISO‑conform inserts simplifies tool inventory and reduces the risk of incorrect mounting. Controlled chip formation and surface quality with fewer interruptions Equipped with a double‑sided chipbreaker, the insert supports stable chip control across a range of feeds and depths of cut, which contributes to improved surface finish and less manual chip handling. The 0.8 mm corner radius gives a compromise between edge strength and achievable surface quality, making it suitable for general turning tasks where improved part tolerances and consistent finishes are required. For internal and external turning operations, the chipbreaker design assists in maintaining process stability and predictable tool wear. Practical guidance for selecting inserts and matching holders When selecting an insert for a specific turning task, consider the workpiece material, rigidity of the setup and whether cuts are continuous or interrupted. The TNMG geometry typically pairs with standard ISO external holders or appropriate boring bars plus a seating pad, clamping kit and replacement fastening screws. If uncertainty remains about the best grade or chipbreaker for an application, technical data sheets and machining recommendations are available to align cutting conditions with the T9215 performance profile; this helps avoid under‑ or over‑specifying the tool and supports efficient process planning. Contact Metav Werkzeuge for tailored selection and ordering of Tungaloy TNMG160408 T9215 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and availability Technical Data Article number: 6772329 Manufacturer SKU: TUN6772329 Model series: ISO‑Drehwendeschneidplatten Name/label: TNMG160408 T9215 Tungaloy‑Wendeplatte Brand: Tungaloy Numbers / Core technical data Insert designation: TNMG160408 Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° SKU: 6772329‑Tungaloy Special features / Versions Material: carbide Coating / grade: CVD‑coated, T9215 Chipbreaker: double‑sided Shape: triangular Hole: with cylindrical hole Typical application: external and internal turning Suited for: medium steel machining ISO standard compatibility for holders FAQ What materials is the TNMG160408 T9215 designed for? The TNMG160408 T9215 insert is optimised for medium steel machining, offering a compromise between wear resistance and toughness for continuous to slightly interrupted cuts. Can this insert be used for internal turning operations? Yes, the TNMG160408 T9215 is suitable for both external and internal turning when paired with an appropriate ISO‑conforming boring bar or holder. How does the chipbreaker affect performance? The double‑sided chipbreaker on this insert promotes consistent chip control, which improves surface finish and helps maintain stable cutting conditions across typical feeds and depths of cut. What should be checked to ensure holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, attachment method, size (16 mm) and thickness (4.76 mm); verifying these dimensions against the holder specification ensures correct fit. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
The combination of high wear resistance, a robust cutting edge and a standard ISO form ensures stable, productive turning of medium steels; precise geometry and the double-sided design reduce tooling costs and changeover time. Order the insert directly via Metav Werkzeuge or consult the team for matching holders and process parameters. TNMG 160408 T9215 — Turning insert (Drehen) by Tungaloy A TNMG160408 ISO-standard triangular insert for general turning and internal/external operations, optimised for medium steel machining with a CVD-coated carbide grade for high productivity. CVD-coated carbide grade T9215 Robust edge for medium steel cutting Double-sided triangular insert for cost efficiency Compatible with ISO turning holders Consistent productivity for medium steel turning The CVD-coated carbide grade delivers high wear resistance and fracture toughness, which translates into longer tool life and fewer indexings during serial turning. The insert is designed primarily for medium steel applications and performs well under continuous to lightly interrupted cuts. As a result, cycle times remain predictable and machining costs per component fall; the coating and substrate combination helps maintain a stable cutting edge even at elevated cutting speeds, supporting higher productivity without sacrificing workpiece quality. Easy integration with ISO tooling systems Thanks to its ISO-standard form and defined geometry, the insert provides reliable compatibility with a wide range of ISO turning holders. The triangular shape and double-sided chipbreaker allow two indexing positions per side, increasing usable life and reducing tooling inventory turnover. The central cylindrical hole and standard attachment arrangement ensure secure clamping and consistent seat location, simplifying tool set-up and repeatability across machines and operators. Geometry that supports surface finish and process stability The insert’s dimensions—16 mm inscribed size with a 4.76 mm thickness and a 0.8 mm corner radius—are matched to common holder profiles and turning applications that require a balance between strength and finish. The included 60° whole-plate angle and a 0° relief angle yield predictable cutting forces and stable chip formation when paired with the right feed and speed. The double-sided chipbreaker promotes controlled swarf evacuation, which benefits surface quality and reduces the likelihood of built-up edge on steel materials. Contact Metav Werkzeuge for tailored holder recommendations and procurement of this Tungaloy grade; the team can advise on feeds, speeds and the most economic indexation strategy for specific turning tasks Technical data Article number: 6772318 SKU: 6772318-Tungaloy Manufacturer SKU: TUN6772318 Model series: ISO turning indexable inserts Material: carbide Coating / grade: T9215 (CVD-coated) Formal designation: TNMG160408 Inscribed size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief / rake angle: 0° Hole: with cylindrical hole Plate shape: triangular Chipbreaker: double-sided Typical application: turning (external and internal) Suitable cut type: continuous and slightly interrupted FAQ What materials is this insert best suited for? This TNMG160408 T9215 insert is optimised for medium steel; the CVD-coated carbide composition offers a good balance of wear resistance and toughness for general steel turning. How many usable cutting edges does the insert provide? The triangular, double-sided design provides multiple indexable edges, increasing total usable life compared with single-sided geometries. Is the insert compatible with standard ISO holders? Yes, the TNMG160408 follows ISO geometry and is compatible with ISO turning holders that match the form, relief angle and thickness specifications. Can this grade be used for interrupted cuts? The insert handles continuous to slightly interrupted cuts well; for heavy interruptions, review holder rigidity and cutting parameters before use. Where can process parameters for this insert be obtained? Recommended feeds and speeds can be provided by Metav Werkzeuge or derived from tooling data sheets; machining conditions depend on workpiece alloy, rigidity and machine capability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, consistent 60° triangular geometry, and an optimised grade for medium steel to increase tool life and machining stability; order genuine Tungaloy cutting inserts via Metav Werkzeuge or request tailored application advice from our specialists. TNMG 160408 T9215 — ISO triangular turning insert, CVD-coated carbide by Tungaloy A TNMG160408 T9215 indexable insert for ISO-compliant external and internal turning, designed for productive machining of medium steel with a 60° geometry and a 0.8 mm corner radius. CVD-coated carbide for high wear resistance Optimised for medium steel machining 60° triangular geometry, 0.8 mm corner radius Double-sided insert with cylindrical hole Increased productivity through robust cutting performance The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T9215 provides a reliable balance between wear resistance and breakage resistance. This results in longer useful life under continuous to slightly interrupted cutting conditions, which reduces tool changes and supports a steady production flow. For contract manufacturers and job shops, the practical effect is fewer downtime events and a lower cost per finished component while maintaining consistent dimensional results. Predictable machining thanks to standardised geometry and compatibility The 60° triangular geometry and 0.8 mm corner radius deliver dependable edge strength and are well suited to general turning profiles. As an ISO-format insert, compatibility with holders depends on form, clearance angle, tolerance class, clamping method, size and thickness—factors that ensure precise seating and repeatable positioning. The double-sided design with a cylindrical hole allows economical use of the insert life while preserving clamping stability and concentricity in the toolholder. Better surface finishes and chip control for smoother cycles A matching doubled-sided chipbreaker and the T9215 grade support controlled chip formation when machining medium steel, which helps prevent snarling and improves evacuation in long cuts. Proper chip control lowers the risk of built-up edge and contributes to a more consistent surface quality, reducing downstream finishing operations. When selecting the chipbreaker and cutting parameters, align the choice with workpiece stability and machining strategy to optimise both tool life and part quality. Application guidance and straightforward integration into existing toolsets This insert is intended for turning applications in medium steel. The insert’s CVD-coated layer and carbide core make it a first choice for users seeking a compromise between tool life and fracture resistance. If further technical data or advice on holder selection and cutting data are required, contact the Metav Werkzeuge technical team for support via email or phone: info@metav-werkzeuge.com / +49 2822 7131930. Practical guidance helps to match grade, chipbreaker and feed rates to the specific machining task for predictable results. For productive medium-steel turning with reliable wear resistance, contact Metav Werkzeuge for application advice and to secure genuine Tungaloy inserts. Technical data Article number: 6772335 Manufacturer article number: 6772335 Manufacturer SKU: TUN6772335 Our SKU: 6772335-Tungaloy Article name: TNMG160408 T9215 Tungaloy-Wendeplatte Facts Shape: triangular Size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Included hole: with hole (cylindrical) Insert angle: 60° Corner radius: 0.8 mm Special features Material: carbide Coating / grade: T9215 (CVD-coated) Double-sided insert ISO-compliant turning insert Suitable application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance, clamping, size and thickness FAQ Which materials is this insert best suited for? The TNMG160408 T9215 insert is optimised for medium steel, combining wear resistance and toughness for general turning tasks. Can the insert handle interrupted cuts? The T9215 grade is designed for continuous to slightly interrupted cutting; it offers a balance between fracture resistance and wear resistance for typical turning interruptions. What are the key geometric specifications? The insert has a 60° triangular geometry, a 0.8 mm corner radius and a thickness of 4.76 mm, with a cylindrical hole for secure clamping. How does the chipbreaker affect performance? The double-sided chipbreaker supports controlled chip formation in medium-steel machining, improving evacuation and surface finish while reducing built-up edge. How to ensure holder compatibility? Compatibility is ensured by matching the insert form, clearance angle, tolerance class, clamping method, size and thickness with the toolholder specification; consult the holder data sheet for seating dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, double-sided chip control, and ISO compatibility to increase throughput in medium-steel turning operations; order the TNMG160408 insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160408 T9215 triangular indexable insert for turning by Tungaloy — CVD-coated carbide for medium-steel machining TNMG160408 is an ISO‑standard triangular turning insert designed for reliable outer and inner turning, offering a robust carbide substrate and a T9215 CVD coating for demanding production environments. CVD-coated carbide grade T9215 Double-sided chipbreaker for chip control Triangular ISO form TNMG, 16 mm 0.8 mm corner radius for strength Boosted productivity through a wear-resistant CVD grade The T9215 grade combines a CVD-coated carbide substrate with a formulation optimised for medium‑strength steel, delivering elevated wear resistance while maintaining fracture toughness. This balance enables longer tool life under continuous and lightly interrupted cuts, reducing cycle interruptions and tool changes. The result is measurable improvements in component output and machining stability for high‑volume turning applications. Consistent fit and process stability in ISO turning systems Designed to the ISO‑standard triangular form, the insert offers predictable seating and repeatability in compatible holders. The 0° relief angle and standard ISO geometry ensure secure clamping and consistent cutting position when matched to a suitable external holder or boring bar. Clear specification of form, relief, tolerance and thickness simplifies tooling selection and helps maintain consistent part quality across shifts. Effective chip control and robust cutting edge for varied turning tasks The double-sided chipbreaker and a 0.8 mm corner radius provide reliable chip formation and edge strength, which is particularly beneficial when switching between roughing and finishing passes. The chipbreaker geometry promotes short, controllable chips that ease evacuation and protect the workpiece surface, while the rounded corner extends edge life and improves resistance to edge chipping in interrupted cuts. Practical integration and application guidance for production As part of a system comprising an ISO insert, matching external holder or boring bar, and appropriate clamping set, this insert is made for straightforward replacement and predictable performance. The triangular shape with a cylindrical hole allows repeatable indexing; choosing the correct chipbreaker and grade for the specific workpiece material secures the best balance of productivity and surface finish. For selection support, rely on application data and holder compatibility specifications. Contact Metav Werkzeuge for tailored application advice on Tungaloy TNMG inserts or to request availability and delivery for your production needs — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6772311 Manufacturer SKU: TUN6772311 SKU: 6772311-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief/clearance angle: 0° Special features Grade: T9215, CVD-coated carbide Chipbreaker: double-sided Shape: triangular (TNMG form) Hole: with cylindrical hole Application: turning; outer and inner turning; suited to continuous to lightly interrupted cuts FAQ What materials is this insert suitable for? The Tungaloy TNMG160408 T9215 insert is formulated for medium‑strength steel machining and delivers a blend of wear resistance and toughness for productive turning. How does the T9215 coating affect performance? The CVD-coated T9215 provides improved abrasion resistance while retaining fracture toughness, extending tool life in continuous operations and under light interruptions. Is the insert compatible with standard ISO TNMG holders? Yes; the insert follows ISO TNMG dimensions and locates in compatible external holders or boring bars when the holder matches form, thickness and clamping specifications. Can the insert be indexed to use multiple edges? The triangular TNMG geometry and central hole allow indexing of multiple cutting edges to maximise usable life before replacement. What chip control can be expected with the double-sided breaker? The double-sided chipbreaker produces short, manageable chips suitable for automated and manual chip evacuation, improving process reliability and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
High wear resistance combined with strong fracture toughness makes this insert a reliable choice for productive medium-steel turning; the CVD coating extends tool life while the double-sided chipbreaker stabilises chip formation for consistent surface finish. Order the TNMG160408 T9215 insert directly via Metav Werkzeuge or ask the consultants if further specification is required. TNMG 160408 T9215 — Indexable turning insert for turning (Tungaloy) TNMG160408 T9215 is an ISO-standard indexable turning insert engineered for medium steel machining, offering a CVD-coated cemented carbide grade optimised for continuous to lightly interrupted cuts. CVD-coated cemented carbide grade T9215 0.8 mm corner radius for fine turning Triangular 16 mm insert with cylindrical hole Double-sided chipbreaker for consistent chips Efficient cutting for medium steel with high wear resistance The CVD-coated cemented carbide composition and the T9215 grade combine to deliver high wear resistance and reliable fracture toughness, enabling sustained productivity in medium-steel turning. This geometry and coating pairing reduces flank wear under continuous or lightly interrupted conditions, which leads to longer effective tool life and fewer indexings. The technical design supports steady metal removal rates while maintaining dimensional stability over extended cycles. Geometry and chip control that improve process reliability A triangular plate with a 0.8 mm corner radius and a double-sided chipbreaker ensures predictable chip formation and controlled evacuation. The insert’s cylindrical hole and 60° wedge angle provide secure clamping in compatible ISO external holders or boring bars; correct seating and clamping torque ensure repeatable positioning and concentricity. For users less familiar with chipbreaker design: the double-sided breaker offers two cutting edges per index, permitting economical use of the insert before replacement. Productivity gains through consistent surface finish and durability The combination of a robust substrate and CVD surface treatment reduces abrasive and adhesive wear, supporting consistent surface quality and fewer secondary operations. In practical terms, this means more parts produced between tool changes and stable component tolerances over production runs. The insert’s performance profile is particularly suited to shops aiming for a balance between abrasive resistance and edge strength in routine turning tasks. Clear compatibility guidance and system integration The inserts are part of an ISO turning insert system; compatibility with a selected holder is determined by plate form, clearance angle, tolerance class, fastening method, size and thickness. The system typically includes the insert, a matching external holder or boring bar, a backing shim or clamp set, and replacement screws. Selection should consider workpiece stability and machining type—continuous versus interrupted—to match the chipbreaker and grade to the application, ensuring process security and repeatable results. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and to secure the TNMG160408 T9215 for efficient medium-steel turning operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796048 Manufacturer SKU: TUN6796048 SKU: 6796048-Tungaloy Material: Cemented carbide Model series: ISO turning indexable inserts Grade: T9215 Facts ISO designation: 160408 Radius: 0.8 mm Plate size: 16 mm Thickness: 4.76 mm Angle: 60° Clearance angle: 0° Special features Triangular plate form Cylindrical hole Double-sided chipbreaker CVD-coated cemented carbide grade T9215 Designed for turning (external and internal) Suitable for continuous to light interrupted cuts Compatibility depends on holder form, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The TNMG160408 T9215 insert is designed primarily for medium steel machining; the CVD-coated cemented carbide grade offers wear resistance suited to this material class. How does the double-sided chipbreaker affect tool economy? The double-sided chipbreaker provides two usable cutting edges per index, improving edge utilisation and reducing the frequency of insert changes for the TNMG160408 T9215. Is this insert compatible with standard ISO holders? Yes, the insert conforms to ISO plate geometry; compatibility with a given holder requires matching the plate form, clearance angle, tolerance class, fastening and thickness. What is the purpose of the cylindrical hole in the insert? The cylindrical hole ensures positive and repeatable clamping with the appropriate screw and clamp system, aiding positional accuracy and repeatability during indexings. Can the insert handle interrupted cuts? This grade is suitable for continuous to light interrupted cuts; heavy interruptions may necessitate a grade with enhanced edge toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Achieve reliable, high‑productivity turning by combining the CVD‑coated T9215 carbide grade with the ISO TNMG 160408 geometry; the result is strong wear resistance and fracture toughness for continuous to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our product specialists for application support. TNMG 160408 T9215 Tungaloy indexable insert — Turning, CVD‑coated carbide, 60° The TNMG160408 T9215 Tungaloy indexable insert is an ISO‑standard triangular insert engineered for external and internal turning of medium‑strength steels, offering a balance of wear resistance and breakage safety. CVD‑coated carbide grade T9215 ISO TNMG 160408 triangular insert 60° cutting geometry for predictable cuts Double‑sided chipbreaker, centred hole Dependable performance for medium‑steel turning The insert is built from CVD‑coated carbide and the T9215 grade, which combines high wear resistance with improved fracture toughness to maintain edge stability during extended runs. This composition makes the insert particularly suitable for continuous to slightly interrupted cuts, supporting higher spindle speeds and longer tool life compared with uncoated grades. The coating reduces flank wear and increases process reliability, enabling more consistent component quality and reduced tool change frequency. Designed for secure fit and fast tool changes Compatibility with a toolholder depends on the insert’s form, relief angle, tolerance class, fixing method, size and thickness. This triangular ISO TNMG 160408 design features a 60° wedge angle, 0° relief and a 0.8 mm corner radius, together with a centred cylindrical hole for secure clamping. The 4.76 mm thickness and 16 mm size ensure compatibility with standard TNMG toolholders and boring bars. In practice, the insert is mounted with a suitable holder, shim/clamping set and replacement screws to form a stable cutting system that simplifies setup and repeatability. Chip control and process predictability for shopfloor efficiency The double‑sided chipbreaker optimises chip formation for medium steels, improving evacuation and surface finish while helping to avoid re‑cutting. Selecting the correct chipbreaker and grade for the workpiece material and machining stability reduces cycle times and lowers the risk of unexpected tool failures. For through‑feed or shoulder turning, the combination of the T9215 grade and the geometrical features of the insert supports predictable tool life and consistent surface integrity, which simplifies process planning and cost‑per‑part calculations. Practical system advice and simple terminology An indexable insert functions as the wear part of a complete cutting system: the insert, a compatible external holder or boring bar, a shim or clamping set, and the fastening screw. The ISO designation indicates form and size; TNMG160408 decodes to a triangular insert with the 160408 dimensions and a 0.8 mm corner radius. CVD coating refers to a chemical vapour deposition layer applied to the carbide substrate to improve resistance to abrasion and thermal wear. Choosing the correct insert grade and chipbreaker according to workpiece material and cutting conditions ensures the most economical and reliable outcome. For specification support or to procure the Tungaloy T9215 TNMG160408 insert, contact Metav Werkzeuge for expert advice: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Manufacturer article number: 6775267 SKU: 6775267-Tungaloy Manufacturer SKU: TUN6775267 Core measurements Insert designation: TNMG160408 Corner radius: 0.8 mm Thickness: 4.76 mm Size: 16 mm Wedge/cutting angle: 60° Relief angle: 0° Special features Material: Carbide Coating: CVD Grade: T9215 Plate form: Triangular Hole: Centred, cylindrical Chipbreaker: Double‑sided Typical application: External and internal turning of medium steels System components: Insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The TNMG160408 T9215 insert is optimised for medium steel machining; the T9215 grade offers wear resistance and breakage safety for continuous to slightly interrupted cuts. How does the T9215 grade compare to others? Tungaloy’s T9215 grade, with its CVD coating, focuses on a balance between abrasion resistance and toughness, making it a preferred choice where consistent tool life and productivity are required. How is insert compatibility with a holder determined? Compatibility depends on the insert’s form, relief angle, tolerance class, fixing method, size and thickness; the ISO TNMG160408 geometry and the centred hole ensure secure clamping in standard TNMG toolholders. What role does the double‑sided chipbreaker play? The double‑sided chipbreaker controls chip shape and evacuation to improve surface finish and reduce the chance of re‑cutting, which supports stable cycle times and easier chip handling. How should the designation TNMG160408 be read for ordering? TNMG refers to the triangular ISO shape, while 160408 denotes the size and geometry; specifying T9215 clarifies the carbide grade and CVD coating for correct application selection. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise 60° triangular geometry and a 0.8 mm nose radius for consistent productivity in medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160408 T9215 — Tungaloy triangular turning insert, CVD-coated carbide, 60° The TNMG160408 T9215 is an ISO triangular turning insert designed for external and internal turning, offering a robust CVD-coated carbide grade optimised for medium-steel machining. CVD-coated carbide grade T9215 60° triangular insert for versatile turning 0.8 mm nose radius for accurate profiling Cylindrical hole, double-sided chipbreaker Engineered for steady productivity with medium steels The insert is manufactured from carbide with a CVD coating and the T9215 grade, combining high wear resistance with dependable breakage resistance for continuous to slightly interrupted cuts. This material-and-coating combination reduces flank wear and extends tool life under stable machining conditions, which translates into fewer tool changes and higher throughput. Where surface finish and repeatability matter, the coated carbide provides consistent machining results even during longer production runs, making it suitable for batch production and single-piece flows alike. Precise geometry for repeatable dimensional accuracy The ISO triangular geometry with a 60° included angle and a 0.8 mm nose radius supports accurate profile turning and small-radius features. The insert is double-sided with a cylindrical hole, enabling indexable use and simplified inventory handling. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness, so correct pairing with a matching external holder or boring bar is essential. These geometric features ensure stable cutting forces and predictable chip formation, which benefits cycle-time planning and surface quality control. Practical system setup and recommended applications As part of a typical system assembly the insert works together with a matching external holder or boring bar, a shim/clamp, and replacement screws for secure fixation. The chipbreaker selection and grade choice should be matched to the workpiece material, the type of turning operation and the machine setup: the double-sided chipbreaker and T9215 grade favour medium-carbon and alloy steels in general turning tasks. For interrupted cuts or unstable setups, choose a chipbreaker and cutting data that prioritise edge strength. The insert supports both external and internal turning tasks and is most effective when the cutting parameters reflect the workpiece rigidity and machining strategy. Request tailored cutting-data support and availability from Metav Werkzeuge — contact us for technical matching, batch supply or to discuss how this Tungaloy insert fits specific turning tasks. Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical Data Article number: 6775277 Manufacturer SKU: TUN6775277 Metav SKU: 6775277-Tungaloy Model series: ISO turning inserts Dimensions & Geometry Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Relief angle: 0° Material & Features Material: carbide Coating / grade: T9215 (CVD-coated) Plate form: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suited for? The Tungaloy TNMG160408 T9215 insert is optimised for medium steels and delivers a balance of wear resistance and edge strength suitable for continuous to slightly interrupted cutting. Can this insert be used on internal boring bars? Yes, the triangular ISO geometry and cylindrical hole allow use in compatible boring bars; ensure holder form, clearance and fastening match the insert dimensions. How does the T9215 grade affect tool life? The T9215 CVD-coated grade improves wear resistance and reduces flank wear under steady cutting conditions, extending useful tool life in medium-steel machining. Is the chipbreaker suitable for unstable cuts? The double-sided chipbreaker offers good chip control for general turning; for significantly interrupted cuts or unstable setups, select a chipbreaker and cutting data prioritising edge robustness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for extended tool life and a robust 0.8 mm corner radius for stable cutting in medium to heavy steel turning operations; order genuine inserts directly via Metav Werkzeuge or contact their consultants for application advice. TNMG 160408 T9225 – TNMG160408 T9225 Tungaloy turning insert (CVD-coated carbide, 0.8 mm radius) TNMG160408 T9225 is an ISO-standard triangular indexable insert designed for turning in varying engagement conditions and interrupted cuts CVD-coated carbide grade T9225 Designed for medium to heavy steel machining ISO TNMG160408 triangular insert, 0° clearance Double-sided chipbreaker with cylindrical hole Durable coating and material engineered for productivity The combination of a CVD-coated surface and a carbide substrate in grade T9225 delivers a balance of wear resistance and toughness optimised for medium to heavy steel turning. The CVD process forms a hard, adherent layer that reduces flank wear and thermal degradation during sustained cuts, while the substrate beneath provides impact resistance where variable engagement or light interruptions occur. The insert’s 0.8 mm corner radius and 4.76 mm thickness contribute to edge strength and vibration dampening, which helps maintain consistent surface finish and reduces the need for frequent edge changes. ISO compatibility and system-level advantages As an ISO-standard insert, the TNMG160408 designation denotes a triangular geometry with a 60° included angle suitable for a wide range of turning holders. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching the insert to the correct holder, shim and clamping set ensures secure mounting and accurate repeatability. The double-sided chipbreaker and cylindrical hole enable reliable indexing and clamping, allowing multiple usable cutting positions and straightforward rotation or replacement without special adapters. This system approach supports shorter setup times and higher process stability. Applicability in production and cost-efficiency Primarily intended for external and internal turning of steel components, the insert’s robust design supports productive machining strategies where tool life and consistent chip control matter. The T9225 grade is a universal, wear-resistant choice for workshops facing mixed batch sizes and varying cut conditions; when cutting parameters are optimised, the result is improved cycle times and fewer tool changes. For operations seeking process reliability, selecting a matching chipbreaker and the correct insert geometry can reduce downtime and contribute to predictable, repeatable output—benefits that translate into measurable production efficiency. Contact Metav Werkzeuge for application-specific recommendations and to secure genuine Tungaloy TNMG160408 T9225 turning inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780978 SKU: 6780978-Tungaloy Manufacturer SKU: TUN6780978 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Dimensions & geometry Insert designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical hole, with hole Shape: triangular Material & features Material: carbide (CVD-coated) Grade: T9225 Chipbreaker: double-sided Application: turning; external and internal turning Typical workpiece: medium to heavy steel machining Compatibility: ISO format; requires matching holder, shim and screws FAQ What does the designation TNMG160408 mean for the insert? The designation TNMG160408 identifies a triangular ISO insert with a 60° included angle and a geometry corresponding to the TNMG family; the TNMG160408 T9225 insert from Tungaloy matches holders designed for this ISO size and thickness. Is this insert suitable for interrupted cuts and variable engagement? Yes, the Tungaloy TNMG160408 T9225 insert with its CVD-coated carbide grade and 0.8 mm corner radius is designed to cope with light interruptions and changing engagement, offering enhanced toughness and stable chip formation. Which materials is the TNMG160408 T9225 best suited for? The TNMG160408 Tungaloy insert is optimised for medium to heavy steel machining; the T9225 grade provides a balance of wear resistance and toughness suitable for such workpieces. How is the insert indexed and secured in the toolholder? The TNMG160408 T9225 insert features a cylindrical hole and a double-sided chipbreaker, allowing secure clamping in compatible holders and straightforward indexing for multiple cutting positions. Can this insert be used for internal as well as external turning? Yes, the ISO TNMG form and the grade’s robustness make the TNMG160408 Tungaloy insert applicable to both external and internal turning operations when paired with suitable holders and tooling components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, a universal T9225 grade for medium to heavy steel, and a compact triangular geometry for consistent turning performance — order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. TNMG160408 T9225 turning insert — CVD-coated carbide, 0.8 mm corner radius (Tungaloy) A TNMG160408 T9225 indexable turning insert designed for robust medium to heavy steel turning, offering a balance of toughness and wear resistance for variable cutting conditions CVD-coated carbide for enhanced wear resistance Universal grade T9225 for medium-heavy steel 0.8 mm corner radius for robust edge strength ISO TNMG triangular insert, double-sided chipbreaker Higher productivity through material and grade selection The insert’s CVD coating and T9225 grade are selected to extend tool life under demanding loads while preserving cutting-edge stability. This combination translates into fewer insert changes and more productive machining cycles when performing external and internal turning operations. The geological balance of hardness and toughness in the substrate supports reliable performance during light interruptions or variable engagement, which helps maintain consistent cycle times and lowers per-part tooling costs. Faster set-up and reliable clamping for stable cuts The triangular TNMG geometry with a 60° included angle and 0.8 mm corner radius delivers predictable tool contact and a sturdy cutting edge that resists chipping. The insert’s double-sided configuration and the cylindrical locating hole allow for rapid indexing and secure clamping in ISO-compatible holders, reducing downtime for regrinds and replacements. These mechanical details contribute to stable cutting forces and improved surface finish with minimal operator intervention. Application guidance and system integration for turning work Designed for turning applications, this carbide insert is suited to an array of holders and tool systems where ISO dimensions and clamping standards are observed. The insert’s geometry and chipbreaker design support effective chip control during medium to heavy steel machining, while the coating enhances thermal resistance at elevated cutting speeds. Consider the full system — holder, shim, clamping set and screws — to ensure optimal torque transmission and consistent axial clearance for long-term repeatability. Contact Metav Werkzeuge for tailored recommendations on using Tungaloy TNMG inserts in specific turning operations and to request cutting data or availability details. Technical data Article number: 6780727 SKU: 6780727-Tungaloy Manufacturer SKU: TUN6780727 Series: ISO turning inserts Grade: T9225 Material: carbide Application: Turning ISO designation: TNMG160408 Shape: triangular Dimensions & geometry Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle (relief): 0° Hole: with hole Hole style: cylindrical hole Features & applications CVD-coating Double-sided chipbreaker Universal grade for medium-heavy steel Compatible with ISO holders and shims Suitable for interrupted and variable cuts System components: holder, shim, clamping set, screws FAQ What materials is this insert intended for? The TNMG160408 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for variable engagement and interrupted cuts. How does the T9225 grade affect tool life? Tungaloy’s T9225 grade, combined with a CVD coating, improves wear resistance and edge stability, which typically results in longer tool life and fewer indexings on the insert. Is the insert indexable and how many cutting edges are available? The triangular TNMG geometry is double-sided and indexable; indexing frequency depends on the chosen clamping strategy and toolholder compatibility. Which holder features must be checked for compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness — matching the ISO TNMG dimensions ensures proper fit and secure clamping. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a compromise between edge strength and surface finish, improving resistance to chipping during heavier cuts while still allowing acceptable surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 CVD‑coated carbide grade and ISO compatibility for consistent medium‑to‑heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application matching. TNMG 160408 T9225 indexable turning insert (ISO TNMG 160408, 60°) – Tungaloy The TNMG 160408 T9225 is an ISO‑standard indexable turning insert developed for medium to heavy steel turning, offering a combination of toughness and wear resistance for variable cutting conditions CVD-coated carbide for high wear resistance Universal T9225 grade for variable cutting 0.8 mm nose radius for consistent edge strength Double-sided chipbreaker, ISO TNMG 160408 compatible Reliable cutting performance for demanding steel turning The CVD‑coated carbide composition and the T9225 grade deliver a balance between hardness and toughness that is particularly suitable for medium‑to‑heavy steel machining. The CVD‑coated surface improves wear resistance under thermal and abrasive loads, which lengthens edge life and reduces unplanned tool changes. In practice, this means fewer interruptions on the shop floor, a steadier cycle time and improved process efficiency when handling variable engagement conditions or light interruptions in the cut. The combination of coating and substrate supports repeatable component quality and consistent tool life across batch sizes. Straightforward integration and stable cutting geometry Built to the ISO TNMG 160408 format, the insert ensures straightforward compatibility with matching holders when form, clearance angle, tolerance class, fixing method, size and thickness are observed. The triangular plate shape with a cylindrical centre hole and a plate thickness of 4.76 mm provides secure clamping and torsional stability in the toolholder. The 0.8 mm nose radius contributes to edge robustness and reliable surface finish without excessive cutting forces, while the double‑sided chipbreaker extends the number of available edges per insert. These characteristics reduce fixture checks and simplify inventory planning for toolrooms that require predictable mounting and repeatable results. Application guidance and production benefits Designed principally for external and internal turning, the insert is optimised for steel applications and performs well under interrupted cuts and changing engagement. Selecting the T9225 grade supports a wide material spectrum within steels and offers improved resilience where toughness is required. For operations seeking a pragmatic balance of running time and surface integrity, this insert helps lower overall machining costs through reduced tooling turnover and steady productivity. For specification checks or grade selection advice, Metav Werkzeuge can provide technical guidance to match the insert to the specific holder and machining strategy. For precise application advice or to order genuine Tungaloy indexable inserts contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6781258 SKU: 6781258-Tungaloy Manufacturer SKU: TUN6781258 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Angle: 60° Nose radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 Plate form: triangular Centre hole: with hole Hole style: cylindrical hole Clearance angle (free angle): 0° Chipbreaker: double-sided Special features Grade: T9225 Coating: CVD-coated carbide Application: Turning ISO designation: TNMG160408 Typical use: external and internal turning Compatibility note: holder compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The TNMG 160408 T9225 indexable turning insert is primarily specified for steel machining; the T9225 grade and CVD coating are aimed at mid‑to‑heavy steel turning where toughness and wear resistance are required. How does the 0.8 mm nose radius affect machining? A 0.8 mm nose radius increases edge strength and helps achieve a consistent surface finish while keeping cutting forces at a practical level for medium‑duty turning operations with the TNMG 160408 geometry. Is the insert reversible and how many cutting edges are available? The triangular plate form and double‑sided chipbreaker mean the insert offers multiple usable edges; the exact number depends on mounting and indexing practice but this design extends service life compared with single‑edged configurations. Which holders are compatible with this ISO designation? Holders designed for ISO TNMG 160408 inserts with matching form, clearance angle, tolerance class, fixing and thickness will be compatible; verify the holder specifications against the TNMG160408 format before assembly. What does the T9225 grade signify? T9225 denotes a robust universal carbide grade optimised for variable engagement and slightly interrupted cuts; it is intended to provide a reliable compromise between flank wear resistance and fracture toughness in steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the T9225 CVD-coated grade and the stable triangular TNMG geometry for consistent medium to heavy steel turning; the combination of toughness and wear resistance supports reliable production cycles. Order the insert directly via Metav Werkzeuge or request specialist advice from the technical consultants if compatibility with the toolholder needs clarification. TNMG 160408 T9225 – Turning insert (ISO TNMG160408) by Tungaloy TNMG160408 T9225 is a CVD-coated carbide insert for ISO-compliant external and internal turning in steel, designed for robust, versatile machining. CVD-coated carbide grade T9225 Universal for medium to heavy steel Triangular TNMG shape, 60° cutting angle Double-sided chipbreaker, 0.8 mm corner radius Reliable cutting performance for medium to heavy steel The T9225 grade is a CVD-coated carbide developed for demanding turning tasks where variable engagement or lightly interrupted cuts require additional toughness. The coating provides improved wear resistance and heat protection compared with uncoated grades, which translates into longer tool life and fewer changeovers. For production environments that prioritise uptime, the combination of a tough substrate and a wear-resistant coating yields measurable improvements in process stability and component repeatability. Secure geometry and system compatibility for consistent finishes The TNMG160408 triangular insert features a 60° cutting geometry and a 0.8 mm corner radius that help deliver stable cutting conditions and predictable surface quality. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and reduces vibration. The insert is supplied in an ISO format and integrates into a standard system comprising an appropriate external holder or boring bar, a shim/clamp set and replacement fastening screws for straightforward assembly. Practical guidance to boost productivity and reduce downtime A double-sided chipbreaker and a cylindrical hole improve repeatability and make index changes economical, while the universal nature of the grade supports a wide range of steel alloys under changing cutting conditions. Typical applications include external and internal turning where a balance of wear resistance and toughness is required. If uncertainty exists regarding holder compatibility or the optimal chipbreaker for a specific job, technical consultancy is available to recommend the correct insert, grade and clamping arrangement to maximise tool life and part quality. For reliable medium to heavy steel turning with Tungaloy's T9225 grade, contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6780667 Manufacturer SKU: TUN6780667 Our SKU: 6780667-Tungaloy Designation: TNMG160408 T9225 Facts Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Special features Material: carbide Coating: CVD Grade: T9225 Double-sided chipbreaker Triangular insert with cylindrical hole Application: external and internal turning ISO-compliant insert FAQ What materials is this insert intended for? The TNMG160408 T9225 insert is specified for medium to heavy steel turning; the CVD-coated carbide grade provides wear resistance suited to those materials. Is this insert compatible with standard TNMG holders? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG160408 follows ISO conventions and will fit matching TNMG holders when those parameters align. What advantages does the T9225 grade offer over uncoated grades? The T9225 CVD coating enhances thermal and abrasive wear resistance while the carbide substrate maintains toughness for interrupted cuts, resulting in longer service life and more consistent machining. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker extends service life by allowing index changes and provides consistent chip control under varying conditions, which helps reduce downtime and improves process reliability. Which SKU identifies this exact item for ordering? Order reference: 6780667-Tungaloy (Manufacturer SKU: TUN6780667) for the TNMG160408 T9225 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Benefit from a combination of a CVD‑coated carbide grade and a 0.8 mm corner radius that delivers reliable performance in mid‑to‑heavy steel turning; the ISO‑compatible TNMG 160408 T9225 geometry ensures secure clamping and repeatable results when paired with the correct holder. Order the insert directly via Metav Werkzeuge or consult our technical advisers for selection and mounting guidance. TNMG 160408 T9225 Tungaloy indexable turning insert for turning, CVD‑coated carbide, 0.8 mm radius A TNMG160408 T9225 indexable turning insert designed for robust external and internal turning in steel, offering a balance of toughness and wear resistance for variable cutting conditions. TNMG 160408 T9225 indexable insert by Tungaloy CVD-coated carbide for mid-to-heavy steel machining 0.8 mm corner radius, 60° triangular geometry Double-sided chipbreaker with cylindrical hole Consistent chip control for mid‑to‑heavy steel turning The CVD‑coated carbide grade T9225 provides a deliberate balance between toughness and wear resistance, making it suitable for variable engagement and slightly interrupted cuts encountered in industrial turning. The double‑sided chipbreaker reduces the tendency for long, stringy chips while supporting stable cutting forces; this leads to fewer interruption‑related rejects and more predictable cycle times. As a result, process planners can rely on improved tool life and steadier component quality when machining structural and engineering steels. Secure fit and ISO compatibility for reproducible production Designed to the ISO TNMG 160408 standard, the triangular insert matches holders by form, clearance angle and tolerance class, which simplifies tool assembly and ensures repeatable clamping. The cylindrical hole and the 4.76 mm plate thickness provide positive mechanical support in the pocket, reducing micro‑movements that cause chatter. Specifying an ISO‑compliant insert supports modular tooling strategies and reduces set‑up variability across different machines and operators. Economical indexability and fewer tool changes The triangular shape combined with a double‑sided geometry offers multiple effective cutting edges per index, lowering tooling cost per part and reducing stoppages for insert changes. The 0.8 mm corner radius is a pragmatic compromise between edge strength and dimensional control, enabling slightly heavier depths of cut without sacrificing surface finish. Together, these attributes deliver an efficient balance of cutting performance and operational economy in production environments. Practical advantages for shopfloor implementation This insert is suitable for both external and internal turning where moderate to heavy cutting conditions occur and a tougher grade is beneficial. The 60° included angle supports versatile toolpath strategies while the 0° relief angle helps maintain cutting stability in many standard holder designs. When selecting a holder and clamping set, ensure form, free angle and tolerance class match the insert to exploit its full performance potential and protect the cutting edge integrity. For dependable mid‑to‑heavy turning applications, select the Tungaloy TNMG 160408 T9225 insert and contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6780755 SKU: 6780755-Tungaloy Manufacturer article number: 6780755 Manufacturer SKU: TUN6780755 Model series: ISO-Drehwendeschneidplatten Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole style: cylindrical Grade: T9225 Special features Material: carbide Coating: CVD coating Geometry: triangular, double-sided chipbreaker Application: turning (external and internal) ISO designation: TNMG160408 Compatibility: ISO‑standard holders and bores FAQ What materials is this insert suitable for? The TNMG 160408 T9225 insert is intended for mid‑to‑heavy steel machining and performs well under variable engagement where toughness is required. How many cutting edges are available per insert? The triangular, double‑sided design provides multiple indexable edges, enabling several repositions before disposal and reducing changeover frequency. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class and clamping method; matching the ISO TNMG 160408 form ensures correct seating and secure clamping. What does the T9225 grade offer in daily use? Grade T9225 combines a tough CVD‑coated carbide substrate with wear resistance suitable for stable, productive machining under mixed cutting conditions. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm radius offers a compromise between edge strength and surface finish; for precision finishing, consider smaller radii where appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide, precise ISO form and a double‑sided chipbreaker for stable, economical turning operations; order the inserts directly via Metav Werkzeuge or contact the consultants for tailored machining advice. TNMG 160408 T9225 — Indexable turning insert, CVD‑coated carbide, for Turning — Tungaloy The TNMG160408 T9225 is an ISO‑standard triangular indexable insert for external and internal turning, developed for medium‑to‑heavy steel machining where toughness and reliable chip control are required. CVD-coated carbide grade T9225 Robust universal grade for steel machining Double-sided chipbreaker for stable cuts ISO TNMG triangular 60° form Reliable performance for medium‑to‑heavy steel turning The combination of a CVD‑coated surface on a carbide substrate and the T9225 grade delivers a balance of wear resistance and toughness suited to variable cutting conditions. This makes the insert especially efficient for interrupted cuts or applications with changing engagement. The engineered coating reduces flank wear and extends the interval between indexings, which improves productivity and lowers machining cost per part. The design supports consistent dimensional results across batch production and one‑off jobs alike. Improved chip control and process stability under load A double‑sided chipbreaker on the triangular insert promotes predictable chip formation and evacuation, reducing the risk of built‑up edge and tool vibration during heavier feeds. The 60° triangular geometry, paired with a 0° clearance angle, provides positive engagement for robust turning while maintaining cutting edge stability. The through‑hole with a cylindrical bore secures axial clamping and helps maintain repeatable seating on compatible holders, contributing to stable cutting forces and better surface finish. Optimised compatibility and economical tool management Conforming to ISO TNMG dimensions simplifies tool selection and inventory: 16 mm inscribed circle, 4.76 mm thickness, and a 0.8 mm corner radius are consistent with widely used holders and clamping systems. The insert is double‑edged, allowing economical re‑indexing and rapid replacement, which reduces downtime. Selection of the matching outer holder and correct clamping torque is essential to exploit the insert’s performance; when combined with a suitable holder and the correct feed/speed strategy, the result is reliable productivity and reproducible part quality. For heavy‑duty and general steel turning tasks, rely on Tungaloy’s TNMG inserts supplied through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and availability. Technical data Article number: 6781257 Facts ISO designation: TNMG160408 Manufacturer SKU: TUN6781257 Material: Hartmetall (carbide) Coating: CVD‑coated Size: 16 mm inscribed circle Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: with hole, cylindrical bore Grade/sort: T9225 Typical application: Turning Special features Triangular, double‑sided indexable insert Double‑sided chipbreaker for chip control Robust universal grade for medium to heavy steel machining ISO‑standard form for broad holder compatibility Designed for interrupted cuts and variable engagement FAQ What materials is this insert optimised for? The Tungaloy TNMG160408 T9225 insert is optimised for medium‑to‑heavy steel machining and performs well where toughness and reliable chip control are required. How does the T9225 grade affect tool life? The T9225 grade combines a CVD coating with a tough carbide substrate to deliver improved wear resistance and enhanced edge stability, which typically extends the time between indexing operations. Is the insert compatible with standard ISO TNMG holders? Yes, the insert follows the ISO TNMG160408 form and is compatible with holders designed for TNMG inserts, provided the holder matches form, clearance, tolerance and clamping specifications. What does the 0.8 mm radius mean for cutting performance? A 0.8 mm radius helps absorb cutting forces and improves edge strength versus a sharper corner, offering better stability for heavier cuts and intermittent machining. How is the insert secured in the holder? The insert features a cylindrical through‑hole for secure axial clamping; correct seating and clamping torque on a compatible holder are essential for repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade (T9225), a triangular, double‑sided geometry and ISO conformity for reliable medium to heavy turning operations; order via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. TNMG 160408 T9225 TNMG insert for turning by Tungaloy — CVD‑coated carbide, 60° TNMG160408 T9225 is a triangular, ISO‑design turning insert engineered for external and internal turning where toughness and stable chip control are required. CVD‑coated carbide grade T9225 Triangular 60° geometry with 0.8 mm radius Double‑sided insert for economical indexing Cylindrical hole, 4.76 mm thickness Consistent cutting performance for changing conditions The combination of a CVD‑coated carbide matrix and the T9225 grade delivers a balance of hardness and toughness tailored to medium to heavy steel machining. The coating enhances wear resistance while the substrate provides impact strength, which helps maintain tool life under slightly interrupted cuts or variable engagement. This results in predictable component quality and fewer unexpected insert changes, supporting continuous production runs and efficient use of machine time. Economical handling and repeatable edge life The triangular geometry and double‑sided configuration enable multiple indexings, reducing tooling cost per part and simplifying inventory. With a 4.76 mm thickness and a 0° relief angle, the insert provides stable clamping and rigidity in the holder, helping to minimise vibration and improve surface finish. The insert’s construction allows straightforward seating in ISO‑compliant toolholders and fast rotation to a fresh edge, which supports lean tool management and short changeover cycles. ISO compatibility and quick selection for the workshop Designed as an ISO‑specified turning insert, the part conforms to standard dimensions and tolerances that determine compatibility by form, relief angle, fastening and thickness. The cylindrical hole and standard seat make it compatible with many ISO TNMG holders when the holder matches the insert form and size. Selecting a matching chipbreaker and the T9225 grade according to the workpiece material and machining strategy ensures stable chip formation and process reliability. Practical machining notes and recommended use cases The insert’s 0.8 mm corner radius offers a compromise between edge strength and finer detail capability, suitable for general turning and finishing passes on steel components. The double‑sided chipbreaker supports consistent chip control across a range of cutting depths; choose the chipbreaker style and cutting parameters that align with component geometry and machine rigidity. Further application data and machining recommendations are available so that the insert can be matched precisely to holder geometry and process requirements. Contact Metav Werkzeuge for tailored application advice and to arrange supply of TNMG160408 T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and delivery options Technical data Article number: 6781370 Manufacturer SKU: TUN6781370 SKU: 6781370-Tungaloy Model series: ISO turning inserts Facts ISO designation: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Main angle: 60° Hole: with hole (cylindrical) Special features Material: carbide Coating / grade: T9225 (CVD‑coated carbide) Shape: triangular Chipbreaker: double‑sided Application: turning (external and internal) Typical system: ISO insert + suitable external holder or boring bar, shim/clamping set and replacement screw FAQ Which toolholders fit this TNMG insert? Compatibility requires a holder matching the TNMG form, the ISO size 160408, thickness 4.76 mm and the correct clamping for a cylindrical hole; the TNMG160408 T9225 insert fits holders built for TNMG‑160408 inserts. Is the insert suitable for interrupted cuts? Yes, the T9225 CVD‑coated carbide grade is a robust universal grade designed for medium to heavy steel and offers additional toughness for slightly interrupted cuts. How many usable edges does each insert provide? The triangular, double‑sided design provides multiple indexable edges; each side can be indexed according to the holder’s seating and clamping method for economical edge use. Which operations are recommended for this insert? Intended for external and internal turning, the TNMG160408 T9225 insert performs well for roughing and finishing in steel where a balance of wear resistance and toughness is required. How does the 0.8 mm corner radius influence the operation? A 0.8 mm radius increases edge strength and reduces chipping risk while offering a good compromise between robustness and surface finish capability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and the T9225 universal grade for dependable medium to heavy steel machining; the ISO-format geometry and precise 60° form ensure stable fitting and repeatable results—order directly via Metav Werkzeuge or contact our consultants for tailored recommendations. TNMG160408 T9225 Turning insert by Tungaloy — CVD-coated carbide, 60° triangular A TNMG160408 T9225 turning insert engineered for external and internal turning, offering a robust universal grade for varied cutting conditions. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Triangular 60° insert with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole Reliable fit and ISO-standard compatibility for consistent machining The ISO-format design guarantees compatibility with holders and boring bars when form, clearance angle, tolerance class, fastening and thickness are matched. Correct fit reduces vibration and run-out, which directly improves surface finish and component tolerances. Selecting an insert that adheres to ISO dimensions simplifies tool inventory and ensures that the triangular geometry seats correctly in the clamping pocket, safeguarding repeatability across batches and shortening setup time. Durable coating and grade for demanding steel operations The CVD-coated carbide construction and T9225 grade combine abrasion resistance with toughness, making the insert suitable for medium to heavy steel machining and mildly interrupted cuts. The coating enhances wear resistance while the substrate preserves edge strength under variable engagement. Together these characteristics extend effective tool life and lower the cost per part, particularly in production runs where resilience against changing cutting conditions is required. Geometry and chip control that increase productivity A 60° triangular shape with a 0.8 mm corner radius delivers a practical balance between strength and finishing capability. The double-sided chipbreaker promotes predictable chip formation and evacuation, reducing re-cutting and protecting the cutting edge. The presence of a cylindrical hole provides secure, repeatable clamping and quick indexability on double-sided inserts, so mounting is quick and the productive machining window is maximised. System approach and application guidance for effective implementation The insert functions as part of a system: ISO-format insert, matching external holder or boring bar, a suitable shim/clamping set and spare screws. For best results, match the chipbreaker and T9225 grade to component material, machining stability and feed/speed strategy. Where stability is limited, prefer conservative depths and feeds; in stable setups the universal grade allows for increased cutting parameters and improved throughput. Technical advisors can assist in choosing the correct holder geometry and cutting data for specific batch sizes or component materials. Contact Metav Werkzeuge for personalised machining data and stock availability of Tungaloy TNMG160408 T9225 inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780905 Manufacturer SKU: TUN6780905 SKU: 6780905-Tungaloy Designation: TNMG160408 Manufacturer article name: TNMG160408 T9225 Tungaloy-Wendeplatte Facts Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features Coating / grade: T9225 (CVD-coated carbide) Material: carbide Plate form: triangular Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO turning inserts Mounting: cylindrical hole for secure clamping FAQ What materials is this insert suitable for? The TNMG160408 T9225 insert is designed primarily for steel machining, with the T9225 grade offering robustness for medium to heavy steel operations and modestly interrupted cuts. Can the insert be used for internal as well as external turning? Yes, the ISO-format triangular insert is suitable for both external and internal turning when paired with the appropriate holder or boring bar. How does the T9225 grade influence tool life? The T9225 combination of substrate and CVD coating improves wear resistance while retaining edge toughness, which typically extends effective tool life in variable engagement conditions. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker ensures consistent chip formation and evacuation on both indexed faces, reducing re-cutting and supporting steady surface quality over multiple indexes. How important is matching the holder to the insert? Correct matching of holder form, clearance angle and tolerance class is essential for secure seating and repeatable geometry; this directly affects process reliability and dimensional results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of a proven combination of robust CVD‑coated carbide and ISO compatibility to ensure stable, repeatable machining in medium‑to‑heavy steel turning. The universal T9225 grade balances wear resistance and toughness for interrupted cuts, while the standardised geometry simplifies tool selection and stock management — order directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 160408 T9225 Turning insert for external and internal turning — Tungaloy A TNMG160408 T9225 insert designed for medium‑to‑heavy steel turning, offering a CVD‑coated carbide grade and ISO‑compatible geometry for reliable shop‑floor performance. ISO‑standard triangular insert CVD‑coated carbide grade T9225 0.8 mm nose radius, 60° cutting angle Double‑sided chipbreaker, cylindrical hole Improved process reliability through controlled chip formation This insert combines a CVD‑coated surface with a balanced carbide substrate to deliver consistent chip control under variable loads. The T9225 grade is formulated for robustness in medium‑to‑heavy turning, making it suitable where interrupted cuts or fluctuating engagement conditions occur. The double‑sided chipbreaker aids evacuation and reduces the risk of entanglement, which improves cycle reliability and reduces downtime related to manual clearing. By choosing a standardised insert geometry, process engineers gain predictable tool life and stable cutting forces for repeatable part quality. Versatility for changing machining conditions and interrupted cuts The mechanical toughness of this grade provides a compromise between hardness and fracture resistance, enabling effective machining across a broad range of steels. When facing variable feeds or interrupted cutting, the increased toughness helps to avoid premature chipping while maintaining acceptable wear behaviour. The insert’s universal character reduces the need for frequent index changes and supports efficient batch transitions, contributing to higher overall throughput and lower tooling costs per part. Precise geometry for repeatable profiles and easy clamping A triangular insert with a 60° cutting angle and a 0.8 mm corner radius yields predictable profile accuracy for external contours and internal features. The cylindrical hole and standard thickness ensure secure clamping in compatible ISO holders; dimensional conformity (size and tolerance class) is the decisive factor for fit. Standardisation of these parameters simplifies toolholder selection and shortens setup time, enabling faster first‑piece approval and consistent surface finish on serial production runs. Lower inventory complexity and predictable tooling expenditure Adopting an ISO‑format insert such as this one supports stock rationalisation: one insert covers a spectrum of turning tasks, which reduces the number of SKUs kept in the toolroom. The double‑sided design extends usable edges per insert, improving cost efficiency and decreasing replacement frequency. For procurement and operations, this translates into a smaller inventory footprint, fewer changeovers and a more transparent cost‑per‑component calculation, while retaining the flexibility required for mixed production environments. For guidance on integrating the Tungaloy T9225 insert into specific turning processes or to confirm compatibility with existing holders, contact Metav Werkzeuge for bespoke advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6796095 Manufacturer SKU: TUN6796095 Model series: ISO turning inserts Brand: Tungaloy Facts Corner radius: 0.8 mm Cutting angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm ISO code: 160408 Special features Grade: T9225 Coating: CVD Substrate: carbide Shape: triangular Hole: cylindrical Chipbreaker: double‑sided Clearance angle: 0° Application: turning (external and internal) FAQ What materials is this insert suitable for? The insert with grade T9225 is designed primarily for medium‑to‑heavy steel machining; its CVD‑coated carbide substrate provides the toughness required for such applications. How does the double‑sided chipbreaker help production? The double‑sided chipbreaker on this TNMG insert improves chip control and evacuation, reducing downtimes for chip clearing and promoting consistent surface finish during serial turning operations. Is the insert compatible with standard holders? Yes, the TNMG160408 form follows ISO geometry; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness, so confirm these dimensions against the holder specification. How many cutting edges are available per insert? As a double‑sided triangular insert, multiple indexable edges are provided; the exact number of usable edges depends on correct indexing and wear limits during use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide performance and ISO conformity for reliable machining results; the T9225 grade delivers stable chip control and good toughness for medium to heavy steel turning. Order the insert via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. TNMG 160408 T9225 ISO turning insert, CVD-coated carbide — Tungaloy A TNMG 160408 T9225 indexable insert for ISO‑standard turning, engineered for medium to heavy steel machining and suited to both external and internal turning applications. CVD-coated carbide grade T9225 For medium to heavy steel turning 60° triangular insert with 0.8 mm radius Double-sided chipbreaker with cylindrical hole Consistent cutting performance for demanding steel operations The T9225 grade is a CVD-coated carbide formulation designed to balance toughness and wear resistance, offering dependable performance under variable engagement conditions. In practice, this means fewer unexpected tool changes and a steadier machining process when facing interrupted cuts or fluctuating feeds. The coating supports abrasion resistance while the substrate maintains edge integrity, contributing to longer periods between indexing or replacement and thus improved overall productivity. Predictable fit and quick setup across ISO tooling systems Produced to ISO dimensions, the insert ensures compatibility with standard holders when matched for form, relief angle, tolerance class, fastening and thickness. The ISO conformity reduces setup uncertainty and enables predictable clamping behaviour, which translates to shorter machine downtime and consistent part quality. Selecting the correct holder geometry and clamping set minimises vibration and helps retain the insert’s cutting edge life under stable cutting conditions. Geometry optimised for versatility and surface finish The 60° triangular geometry with a 0.8 mm radius provides a practical compromise between strength and finish capability: the corner radius contributes to edge robustness for medium cuts while still permitting acceptable surface quality on finishing passes. The double-sided chipbreaker design extends usable edges per index and improves chip formation, aiding coolant flow and preventing material build-up. A cylindrical locating hole secures concentric clamping and supports repeatable positioning when indexing. Practical application guidance for reliable results Designed primarily for turning of steel components, this insert is best paired with a rigid holder, an appropriate shim or clamp set and the correct replacement screws to form the complete system. For stable setups and heavier cuts, choose tooling that minimises overhang and provides good vibration damping. Where interrupted cuts occur, the insert’s toughness and chipbreaker geometry help maintain process stability and reduce the risk of premature chipping or edge failure. Contact Metav Werkzeuge for tailored machining advice and secure the TNMG 160408 T9225 insert for reliable, productive turning operations — Metav Werkzeuge can advise on holder selection, clamping sets and delivery options. Technical data Article number: 6780899 Manufacturer SKU: TUN6780899 Manufacturer article number: 6780899 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Insert angle: 60° Insert thickness: 4.76 mm Insert size: 16 mm Special features Grade/coating: T9225, CVD-coated Insert form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Compatible with ISO holders, requires matching form/freiwinkel/tolerance/fastening FAQ What machining tasks is this insert suited for? The TNMG 160408 T9225 indexable insert from Tungaloy is intended for external and internal turning, particularly for medium to heavy machining of steel where interrupted cuts or variable engagement demand increased toughness. Which geometric features define the insert? This insert has a 60° triangular shape with a 0.8 mm corner radius and a double-sided chipbreaker. The combination delivers a balance between edge strength and surface finish while allowing multiple indexings. How does compatibility with toolholders work? Compatibility depends on the ISO form, relief angle, tolerance class, fastening, size and thickness. The TNMG 160408 designation indicates ISO dimensions that fit standard external holders when the holder matches these parameters. How many cutting edges are available per insert? As a triangular, double-sided insert, the TNMG 160408 provides up to six usable cutting edges through indexing, which helps reduce tooling costs and changeover frequency. What material and coating are used on this insert? The insert is made of carbide with a CVD coating in the T9225 grade, engineered for robustness and stable chip formation in steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com