TPGH 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant GT9530 grade, precise ISO geometry and a secure clamping hole for predictable turning performance; order supply or request application advice through Metav Werkzeuge for fast availability and machining support. TPGH 110204 GT9530 Tungaloy turning insert — coated cermet, 11° clearance A TPGH110204L-W13 GT9530 indexable turning insert designed for finishing and light universal turning, delivered in an ISO-compliant triangular form for standard external and internal operations Coated cermet grade GT9530 11° clearance for stable cutting Triangular 11 mm insert, 0.4 mm radius W13 chipbreaker for fine finishing High wear resistance for precise finishing The TPGH110204L-W13 GT9530 insert is engineered to deliver consistent surface quality in finishing and light universal turning. The GT9530 formulation uses a coated cermet designed to resist abrasive wear while preserving a sharp cutting edge, which supports longer tool life under stable cutting conditions. That combination reduces the frequency of insert changes and helps maintain consistent component tolerances, making the grade especially suitable where surface integrity and repeatability are priorities. ISO compatibility and secure clamping for predictable set-up Manufactured to ISO geometry, the triangular indexable insert ensures predictable compatibility with matching holders when form, free angle, tolerance class, fastening, size and thickness are observed. The insert incorporates a cylindrical hole with a one-sided countersink (70°–90°) for reliable clamp engagement. Key dimensions such as an 11 mm inscribed circle and 2.38 mm thickness support a broad range of standard turning toolholders, simplifying tool inventory management and reducing set-up variability. Optimised chip control and application guidance for steel turning The combination of the W13 chipbreaker and a 0.4 mm radius is optimised for fine finishing on steel in stable machining conditions. The geometry promotes controlled chip formation and low cutting forces during light cuts, which contributes to improved surface finish and reduced manual deburring. With an 11° clearance angle the insert minimises rubbing at the flank, improving dimensional stability. For interrupted cuts or heavy roughing, a different chipbreaker or more robust grade should be selected to maintain process security. For specification support or availability of the Tungaloy GT9530 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-focused advice Technical data Article number: 6997892 SKU: 6997892-Tungaloy Manufacturer SKU: TUN6997892 Model series: ISO turning indexable inserts Designation: TPGH110204L-W13 GT9530 Tungaloy insert Core data Inscribed circle: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Design and features Material: carbide Grade: GT9530 (coated cermet) Chipbreaker: W13 Shape: triangular Hole style: cylindrical hole with one-sided countersink (70°–90°) Application: turning (external and internal) ISO-compliant geometry; holder compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TPGH110204L-W13 GT9530 insert is formulated primarily for machining steel; the coated cermet grade provides wear resistance and a good surface finish when cutting under stable conditions. Which chipbreaker is fitted and what is its purpose? This insert uses the W13 chipbreaker, which is optimised for fine finishing and light universal turning, promoting controlled chip formation and improved surface integrity. How does the insert fix to a holder? The insert features a cylindrical hole with a one-sided countersink (70°–90°) for secure clamping; compatibility requires matching holder form, free angle, tolerance class, fastening method, size and thickness. What cutting geometry helps achieve a good surface finish? A combination of the 11° clearance angle and the 0.4 mm corner radius helps to reduce flank rubbing and supports fine surface finishes during light finishing cuts. Can this insert be used for roughing or interrupted cuts? The GT9530 grade and W13 chipbreaker prioritise finish and tool life in stable conditions; for heavy roughing or interrupted operations, a tougher grade and a more robust chipbreaker are recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110204 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 uncoated cermet grade with a sharp edge and a 0.4 mm corner radius ensures exceptionally low cutting forces and excellent surface finish in finishing operations; order directly via Metav Werkzeuge or request tailored process advice from our consultants. TPGH 110204 NS9530 — Tungaloy triangular insert for turning, 60° TPGH110204L-W13 NS9530 Tungaloy insert for ISO‑standard indexable systems, designed for finishing steel in external and internal turning applications ISO-standard triangular insert Uncoated NS9530 cermet grade Sharp cutting edge for fine surface 0.4 mm corner radius, 11° relief angle Achieve consistent finishing quality with a cermet finishing grade The combination of the NS9530 uncoated cermet and the insert’s geometry yields a finishing solution that reduces cutting forces and minimises built-up edge during continuous cuts. Cermet cutting materials are engineered for high surface integrity and low cutting resistance in light to moderate feeds; this insert is particularly suitable where a superior surface finish and repeatable dimensional control are required. The triangular 60° shape enables multiple indexing positions, keeping downtime low and productivity high while preserving surface quality. Stable, repeatable performance for continuous turning Designed for continuous finishing cuts, the insert’s W13 chipbreaker and sharp cutting edge lower cutting forces and help maintain a steady metal removal regime. The modest 0.4 mm corner radius balances edge strength and contact area to produce fine finishes without sacrificing tool life under stable conditions. The insert’s 11° relief angle supports predictable engagement with the workpiece and contributes to consistent machining outcomes across batches, making it a dependable choice for production environments focusing on repeatability. Easy integration into ISO tool systems and practical handling As an ISO‑conforming indexable insert, compatibility with a toolholder is governed by the insert’s form, relief angle, tolerance class, clamping and thickness. The insert features a cylindrical hole with a single‑sided countersink (70°–90°) for secure fixing and straightforward mounting. Selecting the correct chipbreaker and grade for the workpiece material and operational stability will optimise results; the insert suits both external and internal turning where small depths of cut and continuous feed regimes are used. Clear identification of holder geometry and tolerance ensures correct assembly and maximum process reliability. Contact Metav Werkzeuge for application guidance on Tungaloy NS9530 finishing inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and order support Technical data Manufacturer article number: 6997999 SKU: 6997999-Tungaloy Manufacturer SKU: TUN6997999 Model series: ISO turning indexable inserts Designation: TPGH110204L-W13 Core specifications Corner radius: 0.4 mm Relief angle: 11° Insert thickness: 2.38 mm Inscribed circle / size: 11 Included angle: 60° Hole style: with hole (cylindrical + single-sided countersink 70°–90°) Special features Cutting material: uncoated cermet NS9530 Substrate material: Hartmetall Chipbreaker: W13 Shape: triangular Application: turning (external and internal) Compatibility: ISO holder form, relief angle, tolerance class, clamping, size, thickness FAQ What finishing applications suit this insert best? This TPGH110204L-W13 NS9530 insert is optimised for finishing operations on steel where continuous cutting and small depths of cut are used to achieve high surface quality. Is the insert compatible with standard ISO triangular holders? Compatibility depends on holder form, relief angle, tolerance class, clamping and thickness; the insert is ISO‑standard and designed for use with matching triangular holders. What materials can be machined with the NS9530 grade? The NS9530 uncoated cermet is a finishing grade intended primarily for steel applications, delivering a sharp cutting edge and low cutting forces. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, enabling fine finishes while maintaining adequate edge robustness for finishing passes. What is the hole and mounting style of the insert? The insert is supplied with a cylindrical hole and a single‑sided countersink (70°–90°) to ensure secure and repeatable clamping in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110302 GT9530 Wendeplatten - Tungaloy
Product data conflict: the material is listed as "Hartmetall" (cemented carbide) while the grade is described as "coated cermet (GT9530)". Please verify the source data to ensure consistency and accuracy, as discrepancies in material classification and grade description could lead to misunderstandings or errors in application, manufacturing processes, or quality control. It is important to confirm whether the material is indeed cemented carbide or if the grade designation as coated cermet (GT9530) is correct, as these materials have distinct properties, uses, and performance characteristics. Resolving this conflict will help maintain clarity and reliability in the product's technical documentation.
TPGH 110302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a GT9530 coated cermet grade and ISO‑standard geometry for consistent finishing performance and extended tool life; order the inserts directly via Metav Werkzeuge or consult their specialists for application advice. TPGH 110302 GT9530 Tungaloy — Turning insert for finishing The TPGH110302 GT9530 is an ISO‑standard triangular turning insert engineered for finishing to light universal turning of steel in stable machining setups. Coated cermet grade GT9530 for long tool life ISO‑standard TPGH110302 triangular insert 0.2 mm corner radius for fine surface finish Cylindrical hole with 70°–90° single countersink Consistent finishing and longer in‑service life The coated GT9530 grade offers a balance between wear resistance and surface quality. The insert combines a coated cermet cutting layer with a cemented carbide substrate to maintain edge integrity during finishing operations, which results in fewer tool changes and reduced downtime. In practice, this means stable surface roughness values and a longer cumulative lifetime under the predictable conditions for which the grade is specified. Where high surface quality and extended tool life are priorities, this geometry and grade can improve process consistency and lower unit production costs. Secure clamping and predictable compatibility Designed to the ISO series, the insert designation ensures repeatable fitment in compatible toolholders: TPGH110302 refers to a triangular plate with an 11 mm size and a 60° included angle. The insert features a cylindrical hole with a single‑side countersink (70°–90°) and a nominal thickness of 3.18 mm, which together provide reliable seating and torque distribution when used with the correct clamp and screw. The specified 11° relief angle and tolerance class simplify the selection of matching holders and reduce setup time by ensuring predictable mechanical engagement without trial fits. Practical guidance for turning steel components For external and internal turning of steel, select the single‑side chipbreaker and the GT9530 grade for stable set‑ups and light finishing passes. The 0.2 mm corner radius helps achieve a fine surface finish without sacrificing edge strength, while the single‑side chipbreaker aids chip control in medium feeds. Prefer rigid workholding and moderate cutting parameters to exploit the grade’s potential; under stable conditions the insert delivers repeatable results and lowers rework. For mixed or unstable setups, consider alternative chipbreakers or grades tailored to interrupted cuts. For availability and tailored cutting data for the Tungaloy GT9530 turning inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss matching holders and recommended cutting parameters. Technical data Article number: 6997893 Manufacturer SKU: TUN6997893 SKU: 6997893-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core specifications Designation: TPGH110302 Size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Materials & features Grade: GT9530 (coated cermet) Substrate material: cemented carbide Hole: cylindrical hole with single‑side countersink (70°–90°) Chipbreaker: single‑side Application: turning steel FAQ What materials is this insert suited for? The GT9530 grade is optimised for turning steel; the TPGH110302 insert delivers good surface quality in finishing to light universal applications on steel workpieces. What are the key geometry details of the insert? This insert is designated TPGH110302, triangular with an 11 mm size, 3.18 mm thickness, 0.2 mm corner radius and a 60° included angle; the SKU is 6997893-Tungaloy. How is the insert mounted and secured? Mounting uses the cylindrical hole with a single‑side countersink (70°–90°); a suitably matched clamp, underlay and screw (as per the holder system) ensure correct seating and repeatable torque distribution. When should the single‑side chipbreaker be chosen? The single‑side chipbreaker included with this grade helps chip control during finishing and medium feeds; it is recommended when the setup is stable and the target is a fine surface finish. How to check holder compatibility with this ISO insert? Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness; verify the holder’s acceptance of ISO TPGH inserts and the specified 11° relief to ensure a proper fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet grade for consistently fine surface finish and low cutting forces, combined with the ISO‑compliant triangular geometry for straightforward toolholder compatibility; order directly through Metav Werkzeuge or contact our advisers for application support. TPGH 110302 NS9530 – Turning indexable insert by Tungaloy (triangular, 0.2 mm radius, 11° clearance) TPGH110302 NS9530 Tungaloy indexable insert is an ISO‑compliant triangular insert for precision external and internal turning, optimised for continuous finishing cuts in steel. Uncoated cermet grade NS9530 for finishing Triangular ISO shape with 0.2 mm corner radius 11° clearance angle for low cutting forces Cylindrical hole with 70°–90° countersink High‑precision finishing for steel components The uncoated cermet composition of this insert is engineered for fine finishing of steel in continuous cutting conditions. The cermet microstructure gives a sharp cutting edge and reduced adhesion tendency, which translates into a smoother surface finish and lower rubbing at the flank. For operations with small depths of cut and steady feed, the grade provides consistent dimensional control, reducing the need for rework and improving overall process reliability. Geometry and edge specification that improve process stability The triangular geometry with an included angle of 60° and a 0.2 mm corner radius balances strength and sharpness: the small radius supports excellent surface integrity while the shape ensures predictable engagement in standard ISO holders. The 11° relief angle lowers cutting forces and heat generation, enabling longer tool life in finishing passes and more stable machining when tool overhang is unavoidable. The single‑sided chipbreaker aids chip control in steady‑state turning, improving swarf evacuation and reducing the risk of surface damage. Practical compatibility and system considerations for turning shops Being part of an ISO insert family, compatibility depends on the holder’s shape, relief angle, tolerance class, clamping and thickness—this insert measures 3.18 mm thickness and a size designation of 11 for straightforward selection against matched holders. The insert is supplied with a cylindrical hole and a single‑side countersink (70°–90°) to suit common clamping systems and replacement screws. For workshops aiming to standardise finishing operations, this insert simplifies tool inventory while delivering repeatable results in production turning. For precision finishing with the Tungaloy NS9530 cermet insert, contact Metav Werkzeuge for tailored application advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998000 Manufacturer SKU: TUN6998000 Seller SKU: 6998000-Tungaloy ISO designation: TPGH110302 Manufacturer item no.: 6998000 Facts Thickness: 3.18 mm Size: 11 Corner radius: 0.2 mm Clearance (relief) angle: 11° Included angle: 60° Special features Material: carbide (cermet grade NS9530, uncoated) Shape: triangular Hole: with cylindrical hole and one‑side countersink (70°–90°) Chipbreaker: single‑sided Application: turning (external and internal), finishing, continuous cuts FAQ Which materials is this insert best suited for? The NS9530 grade is formulated for finishing steel; the cermet composition offers a sharp edge and low cutting forces ideal for continuous finishing cuts in steel. What are the key geometry specifications to check for holder compatibility? Check the insert shape (triangular), thickness 3.18 mm, size 11, relief angle 11° and the hole/countersink to ensure correct clamping and tolerance match with the toolholder. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm radius provides a fine compromise between edge sharpness and strength, delivering improved surface integrity and consistent dimensional results in finishing passes. Is the insert coated? This insert is uncoated cermet (NS9530), chosen for its sharp cutting edge and excellent surface finish in finishing applications. Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO form and single‑sided chipbreaker make it suitable for both external and internal finishing, provided the holder and clamping match the ISO designation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of an ISO‑compliant triangular insert that delivers sharp‑edge finishing and low cutting forces for consistent surface quality in turning operations; order genuine Tungaloy parts via Metav Werkzeuge or consult the technical team for application advice. TPGH 110302 NS9530 indexable insert for Turning — Tungaloy TPGH 110302 NS9530 is an ISO‑designated triangular indexable insert intended for precision external and internal turning, offering a fine‑finish, low‑force cutting geometry for steel machining. ISO-compliant triangular insert Sharp-edge uncoated cermet NS9530 Low cutting forces, high surface finish Cylindrical hole with 70°–90° countersink High‑precision finishing with reduced cutting effort The insert is engineered for precision finishing on steel, combining a sharp cutting edge with a 0.2 mm corner radius to produce excellent surface integrity at small depths of cut. Its geometry reduces cutting forces, which helps to lower spindle loads and diminishes vibration during continuous operations. As a result, users achieve repeatable parts with improved dimensional stability and a reliable surface finish without aggressive machining parameters. The design supports steady, predictable metal removal in applications that prioritise finish over heavy material take‑off. Reliable fit and fast tool changes through ISO compatibility Manufactured to ISO specifications, the plate integrates easily into standard turning tool holders when matched by form, clearance, tolerance class, fastening method, size and thickness. The triangular form and central hole with a cylindrical bore and one‑sided countersink (70°–90°) ensure secure clamping and consistent seating, which simplifies indexability and reduces set‑up time. This standardisation supports efficient tool changeover routines on production lines and helps maintain process stability across different machines and operators. Material technology explained: uncoated cermet NS9530 The grade is an uncoated cermet developed for finishing applications, optimised to deliver a sharp cutting edge and stable chip formation on steel. Cermet combines ceramic hardness with metallic toughness to provide a balance between wear resistance and edge strength; the NS9530 specification targets low built‑up edge and improved surface quality during continuous cuts. For operators unfamiliar with the term, cermet offers finer grain structure than many carbides, which translates to superior finish and predictable wear behaviour under finishing conditions. Process guidance and economical machining For best results, select the chipbreaker and grade to match the workpiece, stability of the set‑up and feed rate; the single‑sided chipbreaker suits continuous cuts and modest feeds. The plate’s 3.18 mm thickness and compact size support precision turning with minimal overhang, while the 11° clearance angle preserves the sharp edge and reduces rubbing. Together, these characteristics promote longer tool life and fewer interruptions, which improves productivity and lowers unit costs over a production run. Proven manufacturing quality from a reputable supplier further supports consistent outcomes in serial machining. For application support, genuine Tungaloy inserts or to place an order contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultation is available to match the correct grade and chipbreaker to the machining task. Technical Data Article number: 6998002-Tungaloy Manufacturer article number: 6998002 Manufacturer SKU: TUN6998002 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: carbide Core specifications Insert designation: TPGH110302 ISO code: 110302 Angle: 60° Clearance angle: 11° Thickness: 3.18 mm Corner radius: 0.2 mm Size: 11 mm Design & features Triangular plate form Cylindrical hole with one-sided countersink (70°–90°) Single-sided chipbreaker Uncoated cermet NS9530, sharp cutting edge For external and internal turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What workpiece materials suit this insert best? This insert is a finishing grade optimised for steel; the NS9530 cermet excels in continuous cuts where a low cutting force and superior surface finish are required. Is the insert compatible with standard ISO holders? Yes, the insert fits ISO‑compliant turning holders when the holder is matched for form, clearance, tolerance class, fastening method, size and thickness. What distinguishes the NS9530 grade from other grades? NS9530 is an uncoated cermet finishing grade that offers a very sharp edge, stable chip formation and enhanced surface quality compared with many standard carbide grades. Can the insert handle interrupted cuts or heavy roughing? The geometry and grade are tailored to finishing and continuous cutting; interrupted or heavy roughing applications are not the primary intended use and may accelerate edge wear. Which identifiers should be used when reordering? Use SKU 6998002-Tungaloy or manufacturer article number 6998002 to ensure the same indexable insert and grade are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGH 110304 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade (GT9530) and ISO compatibility delivers an excellent surface finish with extended tool life in stable turning operations. Order the TPGH110304 GT9530 insert via Metav Werkzeuge or consult the specialists for application-specific recommendations. TPGH 110304 GT9530 — Tungaloy turning indexable insert, coated cermet, 60° triangle TPGH110304 GT9530 is a coated cermet indexable insert designed for finishing and light general turning of steel under stable cutting conditions Coated cermet grade GT9530 ISO TPGH 110304, triangular 60° form Corner radius 0.4 mm and 3.18 mm thickness Single-sided chipbreaker for finishing Consistent finish with extended tool life The coated cermet chemistry of this insert provides a balance between wear resistance and surface quality. The GT9530 grade is formulated for finish to light universal turning of steel, offering improved flank wear resistance compared with uncoated grades while maintaining good edge integrity. In practice, this means longer intervals between index changes and a consistent component appearance, particularly when machining under stable clamping and cutting conditions. The result is a dependable process that reduces non-productive time and supports predictable batch production. Precision fit and ISO conformity for secure clamping Compatibility with tool holders depends on the insert geometry and specifications: form, clearance angle, tolerance class, fixing method, size and thickness. The ISO TPGH110304 designation ensures interchangeability across compliant holder systems. The insert features a triangular 60° shape, a clearance angle of 11° and a cylindrical hole with one-sided countersink (70°–90°) for reliable clamping. These design details contribute to repeatable seating and accurate tool projection, which are essential for maintaining dimensional stability and repeatable cutting conditions in series turning. Practical application guidance and process notes The single-sided chipbreaker geometry supports chip control during finishing passes, helping to produce an excellent surface finish and predictable chips when matched with appropriate feeds and speeds. The 0.4 mm corner radius is suited to light finishing passes where edge strength supports small radii without sacrificing part quality. For best results, combine the insert with a suitably rated outer holder or boring bar, include the correct shim/clamping set and retainers, and select cutting data aligned to stable setups. Where intermittent cuts or unstable conditions occur, consider alternative geometries or grades optimised for roughing or interrupted cutting. For reliable finishing performance with Tungaloy’s GT9530 grade, contact Metav Werkzeuge to order the TPGH110304 insert or request cutting-parameter recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997894-Tungaloy Manufacturer SKU: TUN6997894 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide ISO designation: TPGH110304 Facts Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Shape angle: 60° Hole: cylindrical hole + one-sided countersink (70°–90°) Special features Coated cermet grade GT9530 Single-sided chipbreaker for finishing Triangular insert form For finishing to light general turning of steel Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ Which materials is this insert suitable for? The GT9530 coated cermet grade is intended primarily for machining steel in finishing to light universal turning applications; the grade prioritises surface finish and wear resistance under stable conditions. What is the corner radius and why does it matter? The corner radius is 0.4 mm; a small radius like this improves edge strength for finishing passes while helping to maintain tight radii and surface integrity on the component. How does the chipbreaker affect performance? The single-sided chipbreaker is designed for finishing; it promotes controlled chip formation and evacuation at appropriate feeds, supporting a better surface finish and predictable chips. Is the insert compatible with standard ISO holders? The insert uses the ISO TPGH110304 form; compatibility depends on holder geometry, clearance angle, tolerance class, fixing method, size and thickness—holders compliant with the ISO form will accept the insert. What is the hole style and how does it influence clamping? The insert has a cylindrical hole with a one-sided countersink (70°–90°), which provides secure seating and repeatable clamping when used with the correct screw and shim arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110304 GT9530 Wendeplatten - Tungaloy
For finishing and light universal turning of steel under stable conditions, the coated cermet GT9530 delivers a superior surface finish and extended tool life while the ISO triangular geometry ensures repeatable clamping and quick index changes; order the insert directly via Metav Werkzeuge or consult technical advisors for tailored application support. TPGH110304 GT9530 ISO triangular turning insert for turning — Tungaloy A TPGH110304 GT9530 triangular ISO turning insert designed for finishing and light general-purpose turning, offering coated cermet wear resistance and an 11° relief angle for predictable performance Coated cermet grade GT9530 for long tool life ISO triangular insert, 11 mm size 11° relief angle with 0.4 mm corner radius Single-sided chipbreaker, hole with countersink Consistent surface quality through advanced cermet coating The coated cermet GT9530 is formulated for wear resistance in finishing operations, providing a balance between hardness and toughness that reduces flank wear and extends service intervals. In practical terms, the improved resistance to abrasion translates into fewer tool changes and more consistent part-to-part surface quality when machining steel under stable cutting conditions. Cermet grades combine metallic and ceramic properties; this insert’s coating further enhances thermal stability and helps maintain the cutting edge where surface finish is critical. Secure clamping and standardised geometry for faster set-up Built to ISO dimensions, the triangular insert features a cylindrical hole with a one-sided countersink (70°–90°) and a 60° included angle, enabling reliable seating in compatible holders. The standardised form, the specified 11° relief angle and a plate thickness of 3.18 mm support repeatable positioning and straightforward index changes. These attributes reduce set-up variability, lower the risk of misalignment and shorten changeover time on the shop floor, which aids process consistency and higher uptime. Predictable chip control and finishing performance A 0.4 mm corner radius combined with a single-sided chipbreaker provides controlled chip formation and stable cutting conditions during finishing passes. The modest corner radius helps maintain dimensional accuracy on external profiles while the chipbreaker directs swarf away from the cutting zone, reducing the chance of surface marks. For applications where a smooth surface and tight tolerances are required, this geometry offers a pragmatic compromise between edge strength and fine finishing capability. Practical system integration and workshop benefits The package is designed for seamless integration into a conventional turning system: an ISO turning insert, a matching external holder or boring bar, a backplate/clamp set and replacement screws form the complete solution. The insert’s ISO designation and clear mechanical data simplify tool selection and stocking; traceability is supported by the manufacturer article number and SKU. This predictability in tooling contributes to efficient inventory management and reliable daily production planning. Contact Metav Werkzeuge today for order placement or application advice on Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and cutting parameters Technical Data Article number: 6997896 SKU: 6997896-Tungaloy Manufacturer part number: TUN6997896 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Plate designation: TPGH110304 Size: 11 mm Thickness: 3.18 mm Relief angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Coating / grade: GT9530 (coated cermet) Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (70°–90°) Plate form: triangular Typical application: finishing to light universal turning of steel FAQ What materials is this insert intended for? The TPGH110304 GT9530 insert is specified for machining steel in finishing and light universal turning operations, using the GT9530 coated cermet to balance surface quality and tool life. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength for finishing passes while supporting accurate profiles; it helps avoid chatter and delivers more consistent surface results with the single-sided chipbreaker. Is the insert compatible with all ISO triangular holders? Compatibility depends on holder geometry, clearance, tolerance class and fastening method; the ISO designation and the cylindrical hole with countersink support fitment in standard triangular insert holders when dimensions match. What are the benefits of the GT9530 coating? The GT9530 coated cermet provides improved wear resistance and thermal stability for longer tool life in stable finishing conditions, leading to fewer tool changes and consistent surface quality. Which spare parts are needed for routine replacement? Typical replacements include the insert itself, matching screws and, if worn, the clamping set or backplate; using original-spec fastening hardware ensures repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, precise ISO geometry and stable clamping for consistent finishing results. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. TPGH110304 NS9530 – ISO triangular turning insert, cermet finishing grade by Tungaloy The TPGH110304 NS9530 is an ISO triangular turning insert designed for finishing operations in steel turning, suitable for both external and internal applications where a fine surface finish is required ISO triangular insert, 60° geometry Uncoated cermet grade NS9530 for finishing Sharp cutting edge for high surface quality Suitable for continuous cuts and small depths Precision finishing for steel turning The uncoated cermet grade NS9530 is formulated for finishing where a very sharp cutting edge and low cutting forces produce superior surface integrity. Cermet combines ceramic hardness with metallic toughness, which explains its capacity to maintain a keen edge and deliver a consistently high surface quality during uninterrupted cuts and small feed engagements. This behaviour makes the insert especially beneficial where dimensional accuracy and component appearance are decisive. Geometry and secure clamping for stable cuts The triangular geometry with a 60° included angle and a nominal corner radius of 0.4 mm supports fine finishing paths while offering predictable chip formation. A clearance angle of 11° and a plate thickness of 3.18 mm contribute to stable seating and reduced vibration when mounted in a correct toolholder. The insert is supplied with a central cylindrical hole plus a single-sided countersink (70°–90°), enabling reliable clamping and repeatable positioning in standard ISO clamping systems, which helps to maintain process stability across shifts. Reliable performance in continuous cutting conditions Designed as a finishing grade, the insert exhibits low cutting forces and excellent edge integrity under continuous cuts, reducing the tendency for built-up edge and enabling tighter dimensional control. The uncoated surface preserves the initial sharpness of the cutting edge, which is advantageous for low-depth passes where surface finish and micro-geometry are the priority. Choosing a one-sided chipbreaker and matching the grade to the workpiece stiffness will optimise the outcome for short engagement depths and fine feeds. Selecting the right system for consistent results Compatibility to the chosen holder depends on insert form, clearance angle, tolerance, clamping method, size and thickness; a complete system includes the ISO insert, an appropriate external holder or boring bar, a shim/clamping kit and replacement screws. For practical selection, pair this triangular finishing insert with rigid fixturing and a holder that supports the insert seat fully—this helps to exploit the ISO standardisation and the insert’s fine-edge properties. When in doubt about set-up parameters or workpiece conditions, further guidance ensures the recommended chipbreaker and cutting conditions are applied. For application support or to secure the Tungaloy TPGH110304 NS9530 insert, contact Metav Werkzeuge for tailored recommendations and ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998001 Manufacturer SKU: 6998001-Tungaloy Name: TPGH110304 NS9530 Tungaloy insert Brand: Tungaloy Facts Included angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 11 Special features Plate form: triangular Hole style: cylindrical hole + single-sided countersink (70°–90°) Cutting material: uncoated cermet NS9530 Substrate material: cemented carbide Application: turning (external and internal) Chipbreaker: one-sided System components: ISO insert, matching outer holder or boring bar, shim/clamping set and spare screws FAQ What is the main application for this insert? This insert is intended for finishing operations in steel turning; the TPGH110304 NS9530 is optimised for external and internal finishing where surface quality is critical. Which materials suit this cermet grade? The NS9530 grade is tailored for steel; it performs best in continuous cutting with small depths of cut to deliver the intended surface finish. What are the key geometry parameters to consider? Key parameters include the 60° included angle, 0.4 mm corner radius, 11° clearance angle and 3.18 mm thickness, together with the cylindrical hole and single-sided countersink for clamping. Is the insert coated? No, the TPGH110304 NS9530 is an uncoated cermet insert, which maintains a particularly sharp cutting edge suitable for finishing. How is compatibility with a toolholder ensured? Compatibility is determined by insert shape, clearance, tolerance class, clamping method, size and thickness; a matching holder, shim/clamping set and correct fixation complete the system for reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGH 110304 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the product lists the material as "Hartmetall" but also specifies the cutting grade as an "uncoated cermet"; this contradiction makes it challenging to determine the exact composition or intended application of the product, as "Hartmetall" typically refers to cemented carbide, which is distinct from cermets in terms of properties and performance, and without further clarification or additional details from the manufacturer, it is impossible to generate a reliable description or provide accurate recommendations for its use in specific machining or cutting operations, potentially leading to confusion or misapplication in practical scenarios.
TPGM 070102 NS9530 Wendeplatten - Tungaloy
Combining a sharp uncoated cermet cutting edge with a precise 60° geometry and a small 0.2 mm corner radius, this ISO triangular insert delivers consistently low cutting forces and an excellent surface finish in finishing operations. Compatibility with ISO holders is ensured by standardised form, clearance angle, tolerance class and fastening; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application matching. TPGM070102 NS9530 triangular indexable insert for finishing — Tungaloy TPGM070102 is a triangular ISO indexable insert designed for finishing steel turning operations, offering a sharp uncoated cermet grade for continuous cuts and fine surface quality. ISO-triangular insert, size 07 Uncoated cermet grade NS9530 Sharp edge for finishing Suitable for internal and external turning Consistent finishing performance with reduced cutting forces The insert’s uncoated cermet composition and a deliberately sharp edge provide reliable finishing behaviour on steel, minimising rubbing and producing a high surface finish. The small 0.2 mm corner radius is optimised for fine passes and delicate profile work, reducing burr formation while keeping tool pressure low. The insert is intended for continuous cuts and modest depths of cut, where the combination of edge geometry and carbide substrate yields stable cutting conditions and consistent dimensional results. Predictable tool-holding and compatibility for efficient production Delivered as an ISO-standard triangular insert, the geometry and the specified 11° clearance angle make holder matching straightforward: compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness. Specifying a matching outside holder or boring bar, plus the required clamp/support kit and replacement screw, ensures repeatable seating and clamping rigidity. This predictability shortens setup time and supports efficient, reproducible turning cycles on conventional and CNC lathes. Grade selection and machining advice for reliable results The NS9530 finishing grade is an uncoated cermet optimised for steel: it offers a sharp edge, low cutting forces and stable chip formation in continuous-feed finishing. For best results, pair the insert with small feed rates and shallow depths of cut typical of finishing passes; select cutting parameters that favour continuous chip flow and minimise interruptions. Where surface integrity and tight tolerances are priorities, the combination of the triangular geometry and the fine-corner radius helps maintain surface quality and extend effective tool life. Contact Metav Werkzeuge today to source original Tungaloy finishing inserts or to receive tailored application advice from our consultants Technical data Article number: 6998005 SKU (manufacturer): TUN6998005 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPGM070102 NS9530 Core specifications Insert angle: 60° Corner radius: 0.2 mm Clearance angle: 11° Plate thickness: 1.59 mm Size: 07 Features & materials Material: carbide Grade/coating: uncoated cermet NS9530 Chipbreaker: one-sided Shape: triangular Hole: with cylindrical hole Application: turning, finishing for steel FAQ Is this insert suitable for finishing steel? Yes. The TPGM070102 NS9530 Tungaloy insert is a finishing-grade uncoated cermet designed for steel turning, delivering a sharp edge and low cutting forces for superior surface quality. Which holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; matching a suitable ISO external holder or boring bar ensures correct seating for the TPGM070102 insert. Can the insert be used for internal turning as well as external turning? Yes. The triangular geometry and the one-sided chipbreaker make the insert suitable for both external and internal turning operations when used with the appropriate holder and cutting parameters. What cutting conditions are recommended for best surface finish? Use continuous cuts with small depths of cut and modest feed rates typical of finishing passes; these conditions favour the NS9530 grade’s sharp edge and help maintain a consistent surface finish. Does this insert have a coating? No. The NS9530 grade is an uncoated cermet, chosen for its sharp edge behaviour and low cutting forces in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 070102 NS9530 Wendeplatten - Tungaloy
Combine the advantages of a sharp cutting edge, low cutting forces and ISO compatibility to achieve consistent finishing in steel turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific setup and holder matching. TPGM 070102 NS9530 – Tungaloy turning insert (uncoated cermet, 60°) The TPGM070102 NS9530 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for fine finishing of steel with continuous cuts. Sharp cutting edge for superior surface finish Uncoated cermet grade NS9530 for low cutting forces ISO 070102 triangular form, 60° included angle Single-sided chipbreaker for reliable chip control Consistent fine finishing thanks to the cutting concept The combination of a sharp cutting edge and the uncoated cermet NS9530 grade delivers noticeably improved surface quality on steel during finishing passes. Cermet materials offer a harder, more wear-resistant cutting edge than conventional grades, which reduces built-up edge and stabilises the cutting action in continuous cuts. For applications with small depths of cut and a priority on surface integrity, the insert’s geometry ensures low cutting forces and a clean part finish. Compatibility and secure mounting for reliable production This insert follows ISO-standard dimensions and is specified as TPGM 070102, so compatibility with appropriate triangular holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole for positive clamping and a 1.59 mm thickness that matches standard clamping sets. Correct pairing with a suitable external holder or boring bar preserves repeatable seat location and tool life. Chip control and stability in steady cutting conditions With a single-sided chipbreaker designed for continuous cutting, the insert produces short, manageable chips under the recommended feeds and depths. The moderate 0.2 mm corner radius balances edge strength and fine surface finish: the radius helps absorb cutting forces while keeping profile accuracy. For stable processes and consistent results, select feeds and depths aligned with finishing parameters rather than heavy roughing cuts. Material grade, application and practical recommendations The NS9530 grade is formulated as an uncoated cermet for finishing steel, offering low friction and reduced adhesion tendencies. This makes the insert particularly suitable for achieving high-quality surfaces in uninterrupted turning operations. Where interrupted cuts or heavy-duty roughing are required, alternative grades or coated solutions should be considered to preserve edge life and process security. For application advice or to order the Tungaloy NS9530 inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 — our team can advise on holder selection and process parameters. Technical data Article number: 6998004 Manufacturer SKU: TUN6998004 Label: TPGM070102 NS9530 Tungaloy insert Series: ISO-turning indexable inserts Application: Turning Facts Insert size: 07 Included angle: 60° Thickness: 1.59 mm Corner radius: 0.2 mm Relief angle: 11° ISO designation: 070102 Special features Uncoated cermet grade NS9530 Single-sided chipbreaker Triangular form with cylindrical hole Designed for external and internal finishing Compatibility determined by form, relief angle and tolerance class FAQ What material is the insert intended for? The TPGM070102 NS9530 is specified as an uncoated cermet grade optimised for finishing operations on steel. Can this insert be used for internal boring as well as external turning? Yes, the ISO triangular geometry and cylindrical hole permit use in appropriate external holders and boring bars for both external and internal turning. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius provides a compromise between edge strength and surface quality, reducing the risk of edge chipping while supporting a fine finish. Is the chipbreaker suitable for interrupted cuts? The single-sided chipbreaker is tailored to continuous cutting and fine finishing; for frequent interruptions or heavy roughing, a different chip control geometry is recommended. Which specification determines holder compatibility? Compatibility is set by the insert’s form, relief angle, tolerance class, fastening method, size and thickness, so matching the ISO 070102 designation with a suitable holder is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 070102 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a precise ISO triangle geometry and the sharp TH10 uncoated carbide grade for efficient turning of non-ferrous parts; the insert’s low cutting forces and predictable chip formation support clean finishes and steady cycle times. Order directly via Metav Werkzeuge or consult our technical team for selection guidance. TPGM 070102 TH10 triangular turning insert, 60° geometry — Tungaloy The TPGM 070102 TH10 is an ISO-compliant triangular indexable insert designed for turning, offering a 60° cutting edge and a small corner radius for precision finishing in non-ferrous applications. Triangular 60° geometry for versatile mounting Uncoated carbide TH10 for clean surface finish 0.2 mm corner radius for fine detail control Single-sided chipbreaker for consistent chips Consistent cutting performance through precise geometry The triangular 60° form and the 0.2 mm corner radius deliver repeatable contouring and reliable edge engagement, which reduces vibration and supports dimensional stability in serial production. The insert’s ISO-compliant designation ensures compatibility with standard holders when form, clearance angle, tolerance class, fastening method, size and thickness are matched, allowing quick replacement and minimal set-up times. By choosing a defined geometry, process variability is reduced and cycle-time consistency is improved. Sharp TH10 grade for lower cutting forces and improved finishes The uncoated carbide TH10 grade is engineered as a sharp, universal option for non-ferrous materials, where a low cutting force and a clean cutting edge are essential. This composition supports superior surface quality on softer metals and alloys and helps to avoid built-up edge in delicate turning operations. In practical terms, the grade reduces the need for secondary finishing and contributes to efficient material removal across a range of workshop tasks. Predictable chip control and secure fixing for safer machining Equipped with a single-sided chipbreaker and a cylindrical locating hole, the insert provides controlled chip formation under consistent clamping. The single-sided chip control works best when the chipbreaker and grade are chosen according to workpiece material, machining type and fixture rigidity, improving safety and reducing manual chip handling. The standard hole design allows secure fastening to compatible external holders or boring bars, supported by a matching shim or clamp set and replacement screws for uninterrupted operation. Easy integration into existing tool systems and workshop routines With a plate thickness of 1.59 mm and size 07, the insert fits common ISO turning tool families and offers a compact cutting edge suited to finishing passes and semi-finish work. The combination of geometry, grade and chip control simplifies process planning: select the matching holder, confirm the 11° clearance angle, and choose the appropriate chipbreaker to achieve the desired surface and productivity. For bespoke advice on holder compatibility or to streamline tooling kits, Metav Werkzeuge provides technical support and ordering options for production-ready setups. The insert is identified as TPGM 070102 and carries manufacturer references for traceability. For reliable turning performance with Tungaloy’s TH10 grade, contact Metav Werkzeuge for ordering and expert selection support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808789 Manufacturer SKU: TUN6808789 SKU: 6808789-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Geometry angle: 60° Corner radius: 0.2 mm Clearance (relief) angle: 11° Plate thickness: 1.59 mm Size: 07 Special features Grade TH10 Uncoated carbide Triangular plate form Single-sided chipbreaker Cylindrical hole for screw fixing ISO insert for turning Compatible with external holders and boring bars FAQ What materials is this insert suitable for? The TH10 grade is intended for non-ferrous materials; the TPGM 070102 TH10 insert from Tungaloy performs well where a sharp, uncoated cutting edge gives low cutting forces and a clean surface finish. How is chip control achieved with this insert? Chip control is provided by the single-sided chipbreaker and the insert geometry; selecting the chipbreaker to match material and stability ensures predictable chips during turning operations. Which holders fit this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; match these parameters to the ISO triangular insert to ensure correct seating and clamping. What identification helps trace this item? Use the manufacturer article number 6808789 and the manufacturer SKU TUN6808789 to identify the Tungaloy turning insert for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 070104 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade, precise geometry and ISO compatibility for reliable finishing on steel components; the design reduces cutting forces and improves surface quality. Order directly via Metav Werkzeuge or request expert machining advice for optimal holder selection and process parameters. TPGM 070104 NS9530 indexable insert for turning, cermet finishing grade — Tungaloy The TPGM 070104 NS9530 is an ISO-format indexable insert designed for precision external and internal turning, optimised for finishing operations on steel. ISO triangular insert for precision turning NS9530 uncoated cermet finishing grade 0.4 mm corner radius for fine surface finish 11° clearance and 60° form angle for stability Consistent finishing performance for steel parts The NS9530 grade is an uncoated cermet specifically formulated as a finishing sort for steel, delivering a sharp cutting edge and low cutting forces. These properties translate into a noticeably high surface finish even at modest feed rates, making the insert particularly suitable for continuous cutting and light cross-sections. By reducing the force transmitted to the component, the insert helps to preserve dimensional accuracy and minimise rework in serial production. Precision geometry that improves process stability The insert’s geometry—a triangular form with a 0.4 mm corner radius, 11° clearance and a 60° form angle—is engineered to balance strength and cutting finesse. The small corner radius aids in achieving fine surface texture while the clearance angle reduces rubbing, so tool life can be extended without compromising finish. These geometric features make the component a practical choice where repeatable accuracy and predictable tool behaviour are required in turning cells and CNC lathes. ISO compatibility simplifies tool system planning Designed as an ISO-standard indexable plate, the insert integrates into standard external holders and boring bars when matched by form, clearance, tolerance class, mounting and thickness. The system typically comprises the insert, a compatible holder, a support shim or clamp set, and replacement screws—allowing quick changeover and consistent clamping. For customers assessing retrofit or new-tool setups, this ISO conformity reduces specification effort and supports streamlined inventory management. Practical application notes and chip control The plate features a one-sided chipbreaker and a cylindrical hole for secure mounting, with a nominal thickness of 1.59 mm. The chipbreaker is optimised for steady chip formation during finishing passes; in combination with the grade chemistry this yields controlled, short chips under continuous-cut conditions. For less experienced planners: a chipbreaker shapes the flow of material away from the cutting edge, improving surface quality and reducing the risk of re-cutting chips on the workpiece. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy insert and guidance on holder matching, cutting parameters and availability Technical Data Article number: 6998006 SKU: 6998006-Tungaloy Manufacturer SKU: TUN6998006 Manufacturer: Tungaloy Model series: ISO indexable insert series Core specifications Corner radius: 0.4 mm Form angle: 60° Clearance angle: 11° Thickness: 1.59 mm Size designation: 07 Hole: with cylindrical hole Design & features Triangular plate shape One-sided chipbreaker Uncoated cermet grade NS9530 Cemented carbide substrate Intended application: finishing on steel ISO format for compatibility with standard holders System components: insert, holder, shim/clamp set, replacement screws FAQ What steels is this grade optimised for? The NS9530 finishing grade is optimised for a broad range of steels, offering low cutting forces and a sharp edge for superior surface finish when using the TPGM070104 insert. How should the insert be clamped in the tool system? Clamping must match the ISO form, clearance and tolerance class; use a compatible external holder with the appropriate shim or clamp set and the specified replacement screws for secure fixation of the insert. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius helps produce fine surface textures and reduces the risk of edge chipping in finishing cuts, making it advantageous for light depth-of-cut finishing passes. Is the plate coated and what does cermet mean? The insert is an uncoated cermet; cermet combines ceramic and metallic phases to provide a hard, wear-resistant cutting edge with good thermal stability, particularly useful in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 070104 NS9530 Wendeplatten - Tungaloy
Take advantage of the sharp cutting edge of the NS9530 finishing grade, the precise 0.4 mm corner radius and the ISO triangular form for consistent surface finish and low cutting forces; ideal for continuous finishing cuts. Order the TPGM070104 NS9530 insert directly via Metav Werkzeuge or consult our specialists if application advice is required. TPGM 070104 NS9530 — Tungaloy ISO triangular turning insert for finishing (11° clearance) TPGM 070104 NS9530 is a precision ISO turning insert intended for finishing operations in steel, designed for low cutting forces and high surface quality. ISO triangular insert TPGM 070104 NS9530 Uncoated cermet finishing grade 0.4 mm corner radius for fine finish 11° clearance angle, 60° included angle Improved finishing performance with lower cutting forces The combination of an uncoated cermet cutting material and a sharp cutting edge yields markedly lower cutting forces, which translates into reduced tool deflection and more consistent part geometry. As a finishing grade, NS9530 is optimised for continuous cutting and small depths of cut, producing superior surface integrity on steels. The modest 0.4 mm corner radius balances edge strength with the ability to achieve tight surface tolerances, while the uncoated surface helps preserve the sharpness required for fine turning tasks. Reliable fitment and predictable system behaviour Compatibility is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; this triangular ISO format integrates with a wide range of standard holders and boring bars when matched correctly. The insert’s 11° clearance angle and 60° included angle ensure stable seat geometry in most ISO clamping systems, while the central cylindrical hole supports secure fastening. Choosing the correct holder, shim and clamp set reduces vibration and improves tool life, enabling a more productive machining cycle and fewer rework operations. Material and application advantages explained The cutting material is an uncoated cermet (NS9530) selected for finishing steel: it provides a sharp edge and low built-up edge tendency, resulting in consistently fine surface finishes. Although nominally compact like a carbide body, the grade is tuned for low cutting forces and precise shearing at small depths; this makes it particularly well suited to external and internal turning where surface quality is paramount. The single-sided chipbreaker supports controlled chip formation under steady feed conditions, reducing the risk of tangles or interruptions in fully automated operations. Choose the Tungaloy NS9530 finishing insert for dependable surface quality — contact Metav Werkzeuge for specification matching and supply. Technical data Article number: 6998007 Manufacturer SKU: TUN6998007 SKU: 6998007-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPGM070104 NS9530 Core dimensions Size: 07 Thickness: 1.59 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Features & application Material: hard metal (carbide) body Cutting grade: uncoated cermet NS9530 Hole: cylindrical, with central hole Chipbreaker: single-sided Typical use: external and internal turning, finishing Suitability: continuous cuts and small depths of cut Compatibility notes: fit determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this grade intended for? The TPGM070104 NS9530 insert is formulated as a finishing grade for steels; the NS9530 uncoated cermet gives a sharp edge and low cutting forces suited to producing fine surface finishes on steel workpieces. Is the insert coated or uncoated? This insert uses an uncoated cermet grade (NS9530), chosen to preserve a sharp cutting edge for finishing operations rather than relying on a surface coating for wear resistance. How can compatibility with holders be ensured? Compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the chosen holder or boring bar ensures secure clamping and predictable performance for the TPGM070104 NS9530. What are the most relevant dimensions to check before ordering? Key dimensions include the size 07 designation, thickness 1.59 mm, corner radius 0.4 mm, clearance angle 11° and included angle 60°; the article number 6998007 or SKU TUN6998007 can be used to confirm the exact item. Which cutting conditions suit this insert best? Best results are achieved in finishing regimes with continuous cutting and small depths of cut; the single-sided chipbreaker and sharp cermet edge favour steady feeds and stable setups for high surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 070104 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of the sharp TH10 grade, uncoated cemented carbide construction and low cutting forces for economical, clean turning of non-ferrous components; order the TPGM070104 TH10 insert via Metav Werkzeuge or consult our technical team for compatibility advice. TPGM070104 TH10 ISO turning insert for external and internal turning – Tungaloy A TPGM070104 TH10 insert designed as an ISO-compliant triangular turning insert for reliable external and internal turning on non-ferrous materials. ISO triangular insert 60° geometry Uncoated cemented carbide TH10 for non‑ferrous metals Sharp grade for low cutting forces and clean finishes Cylindrical central hole for reliable fastening Optimised cutting with low forces and clean surfaces The TH10 grade is an uncoated cemented carbide formulation engineered as a sharp, universal sort that supports low cutting forces and a clean surface finish. For operations where surface quality and minimal burr formation matter—such as machining aluminium alloys or brass—the sharp cutting edge reduces material deformation. Being uncoated avoids built‑up edge formation on softer, gummy materials and simplifies reconditioning, which can improve process consistency in high-throughput shops. Stable geometry for repeatable component tolerances The triangular design with 60° geometry, an effective 0.4 mm radius and a 1.59 mm thickness offers a balance between cutting edge robustness and access to confined radii. The insert features an 11° relief angle and a central cylindrical hole, ensuring secure clamping in standard ISO holders. The TPGM070104 insert follows ISO indexable insert norms, which simplifies tool inventory and reduces changeover time when matched to compatible holders, shims and clamping sets. Controlled chip formation and secure mounting A single-sided chipbreaker on the cutting edge aids predictable chip formation when machining soft to medium‑strength alloys, reducing the risk of entanglement and improving surface continuity. This chip control is particularly valuable for automated turning cycles and short to medium length turning operations. The sharp universal edge is intended for non‑ferrous metals, where it supports efficient material removal while maintaining dimensional stability. Practical integration into ISO turning systems Compatibility is determined by insert shape, relief angle, tolerance class, clamping method, size and thickness. The ISO system approach means the insert is part of a set‑up comprising the insert, an appropriate external holder or boring bar, a shim/clamping set and spare fastening screws. Specifying the TPGM 070104 geometry together with the TH10 grade makes it straightforward to select a holder and establish cutting parameters that match process requirements, reducing setup iterations and increasing machine uptime. Contact Metav Werkzeuge for availability and application advice on the TPGM070104 TH10 Tungaloy indexable insert; technical consultants can confirm holder compatibility or recommend alternative grades—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808792 SKU: 6808792-Tungaloy Manufacturer SKU: TUN6808792 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Material: Cemented carbide Grade: TH10 (uncoated) Geometry: TPGM 070104, triangular, 60° Corner radius: 0.4 mm Thickness: 1.59 mm Relief angle: 11° Hole: Cylindrical Chipbreaker: One-sided Special features Application: Turning (external and internal) Compatibility: ISO indexable insert standards Suitable for: Non‑ferrous metals and operations requiring low cutting forces Insert size: 07 Edge condition: Sharp universal grade FAQ Which materials are best suited to this insert? The TPGM070104 TH10 Tungaloy insert is intended primarily for non‑ferrous metals, where the sharp, uncoated cutting edge supports low cutting forces and good surface finish. Is the insert compatible with standard ISO holders? Yes, the insert conforms to ISO indexable insert standards; holder compatibility depends on matching shape, relief angle, tolerance class, clamping method, size and thickness. What is the purpose of the cylindrical hole? The cylindrical central hole provides a reliable clamping point for secure fastening in compatible holders, supporting repeatable positioning and easy indexing. Can this insert be used for fine finishing? The sharp universal grade and low cutting forces of the TH10 sort support improved surface quality, making the insert suitable for many finishing operations on softer alloys. How is chip control achieved with this insert? Chip flow is guided by the one‑sided chipbreaker; this feature promotes predictable chip formation during turning of softer materials and helps maintain process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGM 090202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, low cutting forces and ISO compatibility for consistent finishing results; the 0.2 mm corner radius and triangular geometry ensure precise small-depth cuts. Order the TPGM090202 NS9530 insert directly via Metav Werkzeuge or ask the consultants if needed. TPGM 090202 NS9530 – Turning indexable insert, triangular 60°, Tungaloy The TPGM090202 NS9530 is a triangular ISO indexable insert for turning, designed as a finishing grade for steel with a sharp cutting edge and low cutting forces ISO-standard turning insert, triangular geometry Cermet finishing grade NS9530 for steel Sharp cutting edge for superior surface finish 0.2 mm corner radius for fine detail Finishing performance with a cermet grade The uncoated cermet grade NS9530 delivers a combination of edge stability and reduced cutting forces that is especially useful for finishing operations on steel. Cermet inserts are engineered to provide a fine, consistent wear pattern and a very good surface finish, which reduces the need for subsequent polishing. For continuous cuts and small depths of cut the sharp edge geometry minimises vibration and improves dimensional repeatability, so less rework is required and component quality is consistent across batches. Secure clamping and geometric compatibility for reliable results The triangular layout with a 60° included angle and the 0.2 mm corner radius gives a defined contact geometry that supports accurate profile turning. Compatibility with the toolholder depends on form, 11° clearance, tolerance class, fastening method, size and 2.38 mm thickness; correct matching ensures stable clamping and repeatable positioning of the insert. The central cylindrical hole (with screw fixation) simplifies mounting and helps to maintain repeatable datum points, reducing positional variation during tool changes and improving process stability. Application and productivity guidance for shop-floor use Designed as a finishing grade for steel, the insert suits external and internal turning where small depths of cut and high surface quality are priorities. The single-sided chipbreaker and the combination of sharp edge geometry promote controlled chip formation in continuous cuts; selection of an appropriate chipbreaker and holder will optimise chip flow for the specific machining conditions. The system approach — indexable insert, matched holder, shim/clamp set and replacement screw — speeds changeovers and supports a predictable production rhythm, helping to increase throughput while maintaining part quality. Contact Metav Werkzeuge for application advice and to order original Tungaloy TPGM090202 NS9530 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998009 Manufacturer SKU: TUN6998009 Internal SKU: 6998009-Tungaloy Model series: ISO turning indexable inserts Facts Included angle: 60° Clearance angle: 11° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 09 ISO designation: 090202 Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Triangular plate, single-sided chipbreaker Cylindrical hole for screw fixation Compatibility: form, clearance, tolerance class, fastening, size and thickness Typical application: external and internal turning FAQ What materials is this insert suitable for? The TPGM090202 NS9530 insert is a finishing grade intended primarily for steel machining; the cermet composition and sharp edge promote low cutting forces and high-quality finishes in continuous cutting operations. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius gives a fine profile suitable for small-depth finishing cuts, producing a smoother surface and reducing the risk of built-up edge during continuous turning with low to moderate feeds. Which geometric parameters must be checked for holder compatibility? Compatibility requires matching the insert form, 11° clearance, tolerance class, fastening type, size (09) and 2.38 mm thickness to the holder; incorrect matching can impair clamping stability and repeatability. Can this insert be used for both external and internal turning? Yes, the triangular geometry and single-sided chipbreaker make the insert suitable for both external and internal turning operations where finishing and surface quality are the focus. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 090202 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing thanks to the sharp cutting edge of an uncoated cermet grade and the ISO‑standard triangular form for reliable holder compatibility; request advice from Metav Werkzeuge to integrate the insert into existing tool systems or to confirm holder matching. TPGM090202 NS9530 — ISO turning insert for finishing applications (Tungaloy) A TPGM090202 NS9530 indexable turning insert designed for precision external and internal turning, offering a sharp uncoated cermet grade optimised for fine surface quality. ISO standard triangular insert TPGM090202 Uncoated cermet NS9530 for fine finishing Sharp edge, low cutting forces, high finish One‑sided chipbreaker; 0.2 mm corner radius Superior surface quality for steel finishing The uncoated cermet grade NS9530 is formulated for finishing operations on steel where a sharp cutting edge and consistent surface finish are decisive. As a finishing grade, the material enables small depths of cut and continuous cutting regimes while keeping cutting forces low; this reduces workpiece vibration and supports repeatable part quality. The behaviour of cermet differs from coated carbides in having a fine edge retention that benefits turning operations requiring excellent Ra values and minimal secondary finishing. Predictable integration with ISO tool systems Compatibility is governed by standardised geometry and mounting details: the triangular form, 11° relief angle, tolerance class, 2.38 mm thickness and the insert’s cylindrical hole determine the correct fit in a holder. It is therefore recommended that the insert is paired with a matching external holder or boring bar; the system typically comprises an ISO insert, an appropriate outer holder or boring bar, a shim/clamp set and replacement screws. These elements ensure secure clamping and correct seat, which is essential for maintaining tool life and process stability. Efficient cutting performance and chip control The single‑sided chipbreaker and the 0.2 mm corner radius are tuned for finishing passes: the chipformer supports controlled chip flow and consistent contact conditions along the cutting edge, while the small radius contributes to fine surface finish without raising cutting forces unduly. In practical terms, this combination is advantageous when machining small depths of cut and continuous feed conditions, as it promotes steady cutting and reduces the likelihood of built‑up edge formation on the insert. Application guidance and handling recommendations Designed for turning duties, the insert is suitable for both external and internal turning of steel when a high level of surface quality is required. The indexable plate is supplied in an ISO design, so selection of a holder should account for form, free angle, tolerance class, fastening method, size and thickness to secure optimal performance. For workshops and production environments seeking predictable finishing results, the insert provides a pragmatic balance of edge sharpness and chip control, while straightforward mounting supports fast changeovers and consistent part output. For precision finishing with Tungaloy inserts, contact Metav Werkzeuge to confirm holder compatibility and application parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and ordering guidance. Technical data Article number: 6998008-Tungaloy Manufacturer SKU: TUN6998008 Manufacturer article number: 6998008 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Shape: triangular Insert designation: TPGM090202 ISO code: 090202 Corner radius: 0.2 mm Relief angle: 11° Included hole: with cylindrical hole Thickness: 2.38 mm Insert size: 09 Included chipbreaker: one‑sided Included grade: NS9530 Special features Material: cemented carbide insert body Coating: uncoated cermet cutting grade NS9530 Application: turning (external and internal) Typical system composition: ISO insert, matching outer holder or boring bar, shim/clamp set and spare screws Compatibility determined by form, relief angle, tolerance, fastening, size and thickness Intended use: finishing of steel with sharp cutting edge and low cutting forces FAQ What materials is this insert best suited to machine? The insert is specified as a finishing grade for steel; the uncoated NS9530 cermet is optimised for steel turning where low cutting forces and a fine surface finish are required. How does the chipbreaker affect finishing passes? The one‑sided chipbreaker provides controlled chip formation and evacuation, which stabilises the cut during finishing and contributes to a consistent surface quality when using small depths of cut. Which holder features must be checked for correct fit? Ensure the holder matches the insert’s triangular form, 11° relief angle, tolerance class, fastening method, size and 2.38 mm thickness; incorrect matching can compromise clamping and repeatability. Is the insert coated and what are the implications? This is an uncoated cermet grade; the absence of coating supports a sharper edge for finishing, while cermet composition offers fine edge retention suited to continuous cuts. Can this insert be used for internal turning? Yes, the geometry and chip control make the insert suitable for internal turning tasks where finishing quality is required, provided the correct boring bar or holder is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑standard triangular geometry, a sharp uncoated cermet grade and precise dimensional tolerances to achieve consistently high surface finishes with low cutting forces; order the insert through Metav Werkzeuge or consult our advisors for holder compatibility and application tuning. TPGM 090204 NS9530 indexable turning insert by Tungaloy — uncoated cermet, triangular 60° A TPGM090204 NS9530 ISO‑standard triangular indexable insert for precision external and internal turning, optimised for fine finishing of steel components. ISO triangular insert TPGM 090204 Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing For continuous cuts and small depths Consistent fine finishing with low cutting forces The combination of an uncoated cermet grade and a deliberately sharp cutting edge delivers low cutting forces and excellent surface integrity on steels. As a finishing grade, NS9530 is designed for continuous cutting and small depths of cut; this reduces vibration sensitivity and helps to maintain dimensional accuracy. The material composition of the grade supports a stable cutting edge that resists chipping in steady feed regimes, resulting in fewer reworks and a more predictable production flow for precision turning tasks. Geometry engineered for secure clamping and repeatability This ISO‑format insert follows established dimensional norms, which means clamping and indexability depend on form, clearance angle, tolerance class, fastening and size. The triangular shape with a nominal insert angle of 60°, an 11° clearance and 2.38 mm thickness provides a robust seating area, while the cylindrical hole permits standard fastening solutions and quick index changes. Correct selection of holder and underlay ensures repeatable position and cutting geometry, reducing setup time and enabling consistent component runs. Material behaviour and application advantages As an uncoated cermet finishing grade, NS9530 is optimised for steels where a fine surface is required and continuous chip formation is expected. The microstructure of cermet promotes heat resistance at the cutting edge and a clean shear, which translates into improved surface finish and reduced tendency for built‑up edge. The insert’s one‑sided chipbreaker supports stable chip formation under light finishing cuts, aiding chip control without compromising the sharpness required for high‑quality finishes. Practical machining guidance for reliable results Select the chipbreaker and grade in line with component material, toolholder stability and cutting strategy; NS9530 performs best in conditions with steady feed and small immersion depths. Ensure the holder matches the ISO designation and tolerance class of the insert to preserve cutting geometry and edge life. For operations that demand repeatable surface quality, combine the insert with a rigid clamping system and moderate coolant application if required to evacuate chips and control cutting zone temperature. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts, holder selection and application limits — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998010 Manufacturer SKU: TUN6998010 SKU: 6998010-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.4 mm Clearance angle: 11° Thickness: 2.38 mm Insert angle: 60° Size designation: 09 Special features Grade: uncoated cermet NS9530 Chipbreaker: one‑sided Shape: triangular Hole: with cylindrical hole Typical application: external and internal turning System components: ISO insert, matching holder, underlay/clamping set, replacement screws Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What machining tasks is this insert best suited to? The answer: The TPGM090204 NS9530 insert from Tungaloy is optimised for finishing operations on steel, particularly continuous cutting and small depth passes where a high surface finish is required. Does the insert require a special holder? The insert fits ISO‑standard holders; holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so choose a holder compatible with the TPGM 090204 geometry. How does the NS9530 grade improve surface finish? NS9530 is an uncoated cermet grade with a sharp cutting edge that reduces cutting forces and promotes clean shear, resulting in improved surface integrity during finishing passes. Is the chip control suitable for automated turning cells? Yes, the one‑sided chipbreaker and the grade’s stable chip formation make the insert suitable for automated finishing cycles when combined with appropriate toolholder stability and process parameters. What identification numbers should be quoted when ordering spare inserts? Please quote the article number 6998010 or the manufacturer SKU TUN6998010 and the designation TPGM 090204 NS9530 to ensure the correct item and grade are supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGM 110202 NS9530 Wendeplatten - Tungaloy
Conflicting product information: one entry lists the component material as "Hartmetall" (cemented carbide), while the cutting grade is specified as NS9530 and described as an uncoated cermet; these substrate types are not the same. Please verify whether the insert is cemented carbide or cermet before a full product description is produced, as this discrepancy could lead to confusion regarding the material properties, performance characteristics, and potential applications of the product, which are critical for ensuring that customers receive accurate and reliable information to make informed purchasing decisions based on their specific requirements and operational needs.
TPGM 110202 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the finishing-grade NS9530 cermet, ISO compatibility and a precise 0.2 mm corner radius to achieve consistent surface finish and low cutting forces in small-depth turning operations. Order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and process optimisation. TPGM 110202 NS9530 Tungaloy turning insert — uncoated cermet, 0.2 mm radius A robust TPGM110202 NS9530 triangular turning insert for finishing on steel, designed for ISO-compliant holders and continuous small-depth cuts. ISO TPGM 110202 triangular insert Uncoated cermet NS9530 for finishing Sharp edge for low cutting forces Single-sided chipbreaker, with hole High-quality finish with a specialist cermet grade The NS9530 grade is an uncoated cermet formulated for finishing operations on steel, delivering a sharp cutting edge and low cutting forces. Cermet combines ceramic hardness with metallic toughness, which improves wear resistance and enhances surface integrity compared with conventional tool grades. For continuous turning and small depths of cut this composition reduces vibration and helps achieve a finer surface finish with predictable tool life, making the insert suitable where dimensional accuracy and optical quality matter. ISO compatibility reduces setup time and uncertainty Supplied as an ISO‑standard triangular plate, the insert fits holders when form, relief angle, tolerance class, fastening and thickness match the toolholder specification. The geometry includes an 11° relief angle, a triangular shape with an included angle of 60°, and a central cylindrical hole for positive clamping. These standardised dimensions simplify toolroom logistics, lower changeover times and make it straightforward to select a compatible external holder or boring bar for conventional turning setups. Process reliability through chip control and small-radius detail A single-sided chipbreaker design supports chip control in finishing cuts, encouraging continuous chips to curl away cleanly and reducing re-cutting. The 0.2 mm corner radius provides a small but stable edge for dimensional detail and fine surface texture; it balances edge strength with minimal tool mark width. The uncoated cermet character makes this insert particularly effective where a fine finish is the priority rather than heavy interrupted cutting, and it pairs well with low-to-moderate feeds and small depths of cut for consistent cycle outcomes. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy NS9530 finishing insert into existing toolholders and for information on availability and delivery options Technical data Article number: 6998012 SKU: 6998012-Tungaloy Manufacturer SKU: TUN6998012 Model series: ISO‑Drehwendeschneidplatten Name: TPGM110202 NS9530 Tungaloy insert Facts Corner radius: 0.2 mm Relief angle: 11° Thickness: 2.38 mm Size: 11 mm Included angle: 60° Special features Uncoated cermet NS9530 Material: carbide body Plate form: triangular Hole: cylindrical hole Chipbreaker: single-sided Typical application: turning (finishing, continuous cuts) FAQ What types of material is this insert best suited for? The NS9530 finishing grade is specified for steel; the TPGM110202 NS9530 insert from Tungaloy is optimised for continuous finishing cuts where a high surface quality is required. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a fine cutting edge that improves surface finish while retaining sufficient edge strength for small-depth finishing; the Tungaloy grade helps maintain this performance over repeated cycles. Is the insert compatible with standard ISO holders? Yes, the plate follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness—match these parameters to the TPGM110202 geometry. What advantage does an uncoated cermet offer compared with coated grades? Uncoated cermet like NS9530 delivers excellent surface finish and lower built-up edge tendency in finishing on steel, prioritising optical quality over the higher thermal resistance of some coated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110202 UX30 Wendeplatten - Tungaloy
Benefit from the sharp cutting edge and consistent chip control of this ISO insert for efficient external and internal turning; its triangular 60° form and 0.2 mm corner radius deliver repeatable geometry and reduced cutting forces. Order the insert directly via Metav Werkzeuge or contact our consultants for compatibility guidance and application-specific advice. TPGM 110202 UX30 Turning insert — triangular ISO insert, 60° geometry by Tungaloy A TPGM110202 UX30 indexable turning insert designed for general-purpose external and internal turning, offering a sharp cutting edge and one-sided chipbreaker for stable chip formation. Sharp cutting edge for low cutting forces One-sided chipbreaker for reliable chip control ISO 110202 triangular form, 60° geometry Uncoated carbide for stable metal removal Precision turning with reliable chip control The TPGM110202 UX30 is specified for turning operations where low cutting forces and consistent chip formation are priorities. The UX30 grade provides a sharp, well-defined edge that improves entry behaviour and reduces the tendency for built-up edge in many steels and common alloys. By favouring controlled chip flow with a one-sided chipbreaker, the insert helps maintain surface finish and reduces the frequency of secondary operations, which supports a more efficient production flow. Technical users will appreciate the predictable cutting behaviour and the direct link between insert geometry and machining outcome. ISO compatibility for flexible tool set-up Designed to the ISO series of indexable inserts, the triangular ISO 110202 form ensures straightforward compatibility with a broad range of external holders and boring bars. The 60° included angle and the 11° relief angle match common toolholder geometries, while the cylindrical mounting hole facilitates secure clamping and repeatable positioning. This ISO conformity simplifies tool inventory management across mixed-machine environments and reduces downtime when changing inserts or switching between turning and boring tasks. Durable carbide construction and economical machining Manufactured from uncoated carbide, this insert combines cutting-edge sharpness with material robustness, allowing effective metal removal across a variety of workpiece materials when the operating window suits an uncoated grade. The 0.2 mm corner radius balances edge strength with the ability to produce fine surface finishes; small radii reduce cutting forces and heat generation, extending tool life under stable cutting conditions. Overall, the combination of grade and geometry supports productive machining and can lower per-part tooling costs through extended edge performance. Practical applications and selection guidance Suited to both external and internal turning, the insert performs best when the chipbreaker and grade selection are matched to workpiece material and machine stability. For heavier cuts or unstable set-ups, a larger radius or a more robust grade should be considered; for finer finishing passes the small corner radius yields improved surface quality. If there is any uncertainty about holder compatibility, recommended cutting data or optimal grade pairing, Metav Werkzeuge offers technical support and application advice to ensure the right configuration for the task at hand. Contact Metav Werkzeuge for tailored advice on the TPGM 110202 UX30 insert and to confirm holder compatibility or stock availability; our specialists will recommend the optimal setup for the intended turning application. Technical data Article number: 6808798-Tungaloy Manufacturer SKU: TUN6808798 Manufacturer item number: 6808798 Model series: ISO indexable turning inserts Application: Turning Core specifications Inscribed circle: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° SKU: 6808798-Tungaloy Design & features Material: carbide (uncoated) Grade: UX30 Chipbreaker: one-sided Hole: with cylindrical hole Shape: triangular (three cutting edges) ISO designation: 110202 FAQ Which materials is this insert suitable for? This insert in UX30 grade is intended for general turning where low cutting forces and good chip formation are required; assess the workpiece material and choose grade/chipbreaker accordingly. Is the insert compatible with standard ISO turning holders? Yes, the insert follows the ISO 110202 designation and is designed for compatibility with ISO-standard triangular turning holders and appropriate clamping systems. What does the 0.2 mm corner radius mean for finishing? A 0.2 mm radius provides a fine balance between edge strength and surface finish, helping to achieve better surface quality on finishing passes while maintaining adequate edge life. Can this insert be used for internal turning (boring)? The insert is suitable for internal turning when mounted in a compatible boring bar; ensure correct holder stability and chip evacuation for optimal results. Is the cutting material coated? The insert is made from uncoated carbide in the UX30 grade, chosen for its sharp edge and stable chip formation characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110204 NS9530 Wendeplatten - Tungaloy
TPGM110204 NS9530 delivers a finishing‑grade cermet cutting edge with a 0.4 mm corner radius and 11° clearance, combining excellent surface finish with low cutting forces; order directly via Metav Werkzeuge or consult the team for selection support. TPGM110204 NS9530 Tungaloy indexable insert for Turning A TPGM110204 NS9530 Tungaloy insert: an ISO‑standard triangular turning insert engineered for finishing steel components with a sharp, uncoated cermet grade. ISO standard triangular insert 11° clearance Uncoated cermet grade NS9530 for finishing 0.4 mm corner radius for fine surface finish Cylindrical hole and single‑sided chipbreaker High-precision finishing that reduces rework The NS9530 uncoated cermet grade is formulated for finishing of steel, offering a sharp cutting edge and low cutting forces that help produce superior surface quality on turned parts. For applications with continuous cutting and small depths of cut, this grade reduces the tendency for built-up edge and improves workpiece appearance, which in turn lowers the need for secondary machining and reduces overall production costs. The combination of a fine edge geometry and the grade’s mechanical properties promotes consistently tight surface tolerances and predictability in process outputs. Stable geometry for repeatable, economical machining The triangular insert geometry and defined parameters—0.4 mm corner radius, 11° clearance, plate thickness 2.38 mm and size 11 mm—deliver repeatable cutting conditions and dependable seating in ISO‑conforming holders. The cylindrical hole and standardised form permit straightforward clamping and fast index changes, shortening set‑up time and increasing machine uptime. Because holder compatibility is determined by shape, clearance angle, tolerance class, clamping and thickness, selecting the correct backing plate and clamps ensures stable chip control and reduces vibration during turning. Simple system integration for efficient tooling management As an ISO indexable plate, this insert integrates into a standard tooling system comprising an appropriate external holder or boring bar, a seating shim and clamping screw set. The single‑sided chipbreaker assists chip control for steady chip flow in continuous cuts, while the insert’s construction supports predictable tool life when paired with correct cutting data. For production environments seeking cost‑effective finishing, these inserts help lower per‑part tooling cost through reliable performance and fast disposal/replacement routines; spare inserts and hardware can be stocked to avoid process interruptions. The TPGM110204 NS9530 insert is therefore well suited where consistent surface quality and economical operation are priorities. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998013 SKU: 6998013-Tungaloy Manufacturer SKU: TUN6998013 Model series: ISO-Drehwendeschneidplatten WPL designation: TPGM110204 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 11 mm Included angle: 60° Special features Uncoated cermet grade NS9530 Carbide body Triangular plate shape Cylindrical hole Single‑sided chipbreaker Designed for turning and finishing steel Optimised for continuous cuts and small depths of cut FAQ Which materials is this insert best suited for? The NS9530 cermet grade is optimised for finishing operations on steel; the TPGM110204 insert provides a sharp edge and low cutting forces for high surface quality on steel components. What cutting conditions are recommended for this grade? TPGM110204 NS9530 performs best in continuous cutting with small depths of cut; these conditions exploit the uncoated cermet’s strengths in surface finish and edge stability. How is the insert mounted in a holder? The insert uses a cylindrical central hole and standard triangular form; correct mounting depends on matching shape, clearance angle and thickness to an ISO‑compatible turning holder and the appropriate clamping hardware. Is this insert suitable for interrupted cuts? As a finishing cermet grade, the NS9530 insert is not optimised for heavy interruption; interrupted or highly severing cuts may shorten insert life compared with continuous finishing operations. What are the key geometric specifications to note before ordering? Key specs for this insert are a 0.4 mm corner radius, 11° clearance, 2.38 mm plate thickness and 11 mm size—confirm these match the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet grade and the precise 11° rake to achieve consistently high surface quality and low cutting forces in finishing operations; order directly via Metav Werkzeuge or consult our specialists for application support. TPGM110204 NS9530 Tungaloy turning insert (uncoated cermet, 11° rake) TPGM110204 NS9530 is a triangular ISO turning insert designed for finishing steel turning, offering a sharp cutting edge and predictable performance in continuous cuts. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Triangular insert with 0.4 mm corner radius 11° rake angle for continuous turning Engineered finishing for superior surface quality The NS9530 cermet grade is formulated for finishing cuts on steel, delivering a very sharp cutting edge and excellent surface finish with low built-up edge tendencies. Cermet combines ceramic hardness with metallic toughness, which improves edge retention at low to moderate cutting speeds and supports small depth-of-cut operations typical for finishing. The result is reduced rework and fewer passes to reach the required tolerance, making the solution particularly suitable for high-value components and precise external and internal turning processes. Seamless ISO compatibility reduces setup time Manufactured to ISO standards, this insert integrates into standard holder systems where form, rake, tolerance class, fastening, size and thickness determine compatibility. The ISO designation simplifies tool selection and reduces inventory complexity: pair the insert with a matching external holder or boring bar, add the appropriate clamp set and replacement screws, and return to production. This standardisation supports reproducible set-ups and shorter tool-change intervals, enhancing throughput in batch and CNC turning operations. Design features for predictable, productive machining The TPGM110204 geometry combines a triangular plate with a cylindrical hole and a single-sided chipbreaker, supporting quick indexing for multiple cutting edges and stable clamping. The 11° rake angle and 0.4 mm corner radius give a compromise of sharpness and edge security that lowers cutting forces and improves surface integrity on continuous cuts. Such characteristics make the insert especially effective where process stability and consistent surface quality are priorities, for instance in component finishing at medium to high production volumes. Contact Metav Werkzeuge for tailored application advice and to secure Tungaloy inserts for finishing turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998014 Manufacturer article number: 6998014 Manufacturer SKU: TUN6998014 SKU: 6998014-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core data Corner radius: 0.4 mm Rake angle: 11° Included angle: 60° Plate thickness: 2.38 mm Inscribed circle / size: 11 mm Hole style: cylindrical Special features Cutting grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Plate shape: triangular with cylindrical hole Typical application: finishing turning of steel System components: ISO insert with matching holders, clamp set and replacement screws FAQ What materials is this insert intended for? The NS9530 finishing grade is designed primarily for steel, with the insert providing low cutting forces and high surface quality in continuous turning operations. How does the NS9530 cermet grade improve finishing performance? The NS9530 cermet offers a sharp cutting edge and good edge retention at finishing conditions, so the insert achieves fine surface finishes and reduces the need for secondary operations when using the TPGM110204 geometry. Is the TPGM110204 compatible with standard ISO holders? Yes, the insert is ISO‑designated and its compatibility is determined by form, rake, tolerance class, fastening, size and thickness; pairing with the appropriate external holder or boring bar is recommended. What does the single-sided chipbreaker mean for chip control? A single-sided chipbreaker on this insert supports controlled chip formation during finishing cuts, improving surface integrity and reducing the risk of chip interference in steady turning operations. Can the insert be indexed to use multiple cutting edges? Yes, the triangular form with a cylindrical hole allows indexing of the insert to utilise multiple cutting edges, extending tool life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com