TPGT 090204 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry and a sharp uncoated carbide grade for consistent chip control and reduced cutting forces; order the insert directly via Metav Werkzeuge or ask the consultants for cutting-data recommendations. TPGT090204 UX30 Tungaloy turning insert — triangular 60°, 0.4 mm radius The TPGT090204 UX30 is an ISO-standard triangular turning insert designed for external and internal turning, offering a sharp uncoated carbide grade that prioritises low cutting forces and reliable chip formation. ISO triangular insert 60° geometry Uncoated carbide grade UX30 Corner radius 0.4 mm for fine finishing Central hole with countersink, single-sided chipbreaker Predictable chip control and efficient cutting This insert is engineered for processes where stable chip formation and low cutting forces matter. The UX30 grade is an uncoated carbide with a deliberately sharp cutting edge that reduces cutting resistance and improves feed response; as a result, operators benefit from more consistent cycle times and less tool-induced vibration. The presence of a single-sided chipbreaker focuses the chip flow for standard turning operations and helps to avoid long stringy chips in routine production. Explanation of technical terms: an uncoated carbide insert offers a sharp edge and good toughness for low-force cutting, while a chipbreaker shapes chips to reduce interference with the workpiece and tool. Geometry tuned for accuracy and surface quality The triangular shape with a 60° included angle and a corner radius 0.4 mm delivers a balance between strength and finishing capability. A small radius reduces edge contact and is especially suited to fine-profile turning or light finishing cuts, improving part geometry and surface quality with minimal secondary passes. The insert’s 11° relief angle aids in reducing rubbing on the flank, which, combined with the precise geometry, supports repeatable dimensional accuracy on turned contours. For users requiring a cleaner finish, the small corner radius and sharp grade produce measurable improvements in surface roughness without sacrificing edge life. System compatibility for streamlined integration Designed as an ISO-standard turning insert, compatibility with toolholders is ensured by matching the insert’s form, relief angle, tolerance class, fastening type, size and thickness. The central cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping in indexable holders and boring bars; this reduces indexing errors and simplifies replacement during production. Typical system components include a matching external holder or boring bar, an underlay/clamp set and replacement screws. For mainline turning and internal profiling, selecting the correct chipbreaker and grade for the workpiece material and setup stability will maximise productivity and reproducibility. Contact Metav Werkzeuge today for application guidance and to secure Tungaloy inserts — Metav Werkzeuge, Parkring 45, 46446 Emmerich; eMail: info@metav-werkzeuge.com; Phone: +49 2822 7131930 Technical data Article number: 6808902 Manufacturer SKU: TUN6808902 SKU: 6808902-Tungaloy Model series: ISO turning inserts Facts Thickness: 2.38 mm Insert size: 09 Included angle: 60° Corner radius: 0.4 mm Relief angle: 11° Special features Grade: UX30 (uncoated carbide) Triangular insert format Single-sided chipbreaker Central hole; cylindrical + one-sided countersink (40°–60°) Application: external and internal turning Compatibility: ISO holders; fit by form, relief, tolerance, fastening, size, thickness FAQ What applications is this insert suited for? The insert is intended for external and internal turning; the TPGT090204 UX30 excels where low cutting forces and reliable chip control are required. What material is the insert made from? The product uses uncoated carbide (Hartmetall) in the UX30 grade, chosen for its sharp edge and predictable cutting behaviour. How is the insert clamped and located in a holder? Clamping uses the central cylindrical hole with a one-sided countersink (40°–60°); compatibility relies on matching form, relief angle, tolerance class, fastening, size and thickness. What surface finish can be expected with the 0.4 mm radius? The corner radius 0.4 mm is suited to fine finishing and profile accuracy, reducing the need for additional finishing passes in many turning operations. Is the chip control suitable for automatic feeding and turning centres? Yes; the single-sided chipbreaker provides controlled chip formation appropriate for standard automatic feeding and common turning centre setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 GT9530 Wendeplatten - Tungaloy
Reliable finishing and extended tool life are delivered by the GT9530 coated cermet grade combined with the ISO triangular insert geometry; compatibility with common ISO holders is ensured by the TPGT110202 form, 11° relief and 2.38 mm plate thickness. Order the insert directly via Metav Werkzeuge or consult the advisers if additional guidance is required. TPGT110202 GT9530 Tungaloy indexable insert for turning — coated cermet, 0.2 mm radius TPGT110202 GT9530 is a triangular ISO indexable insert designed for finishing and light universal turning of steel under stable machining conditions. Coated cermet grade GT9530 Optimised for finishing and stable turning Triangular ISO insert, 11 mm size Cylindrical hole with single-side countersink Precision finishing for consistent surface quality The GT9530 grade is a coated cermet formulated for wear resistance and a superior surface finish during finishing and light universal operations on steel. The mineralogical composition of the cutting material reduces built-up edge formation and supports longer intervals between index changes, which increases effective machining time. In practical terms, this means fewer interruptions for tool changes and a more predictable part finish, especially where consistent dimensional tolerance and surface quality are required. The combination of a small 0.2 mm radius and a well-balanced edge preparation contributes to controlled chip formation and repeatable component quality. Secure fit and holder compatibility for reliable machining Compliance with ISO dimensions and the TPGT110202 geometry ensures straightforward selection of the correct external holder or boring bar. The triangular insert form, paired with an 11° relief and a plate thickness of 2.38 mm, provides mechanical stability and correct seating in standard ISO clamping systems. The centre cylindrical hole with single-side countersink (40°–60°) facilitates accurate axial location and secure clamping, reducing the risk of movement under cutting forces. This measured compatibility simplifies tool inventory management and avoids unexpected setup issues when changing between holders within the ISO system. Material choice and chip control to cut costs and downtime The cemented carbide substrate with the GT9530 cermet coating is optimised for light finishing cuts and offers improved edge life in steady conditions. The insert’s one-sided chipbreaker supports consistent chip control for the specified cutting regime, which reduces manual handling and rework. For workshop planners, using a dedicated finishing grade reduces scrap and rework rates while delivering the aesthetic and dimensional results expected in precision turning. The insert is particularly suitable when the production strategy prioritises surface integrity and repeatability over aggressive stock removal. For specification support, availability checks or to reserve the TPGT110202 GT9530 through Metav Werkzeuge, contact Metav Werkzeuge for practical advice and swift processing of your request Technical data Article number: 6997883 SKU: 6997883-Tungaloy Manufacturer SKU: TUN6997883 Designation: TPGT110202 GT9530 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Insert size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Special features Coating / grade: GT9530 (coated cermet) Material: cemented carbide Shape: triangular Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning (finishing to light universal) System: ISO-compliant insert, compatible with ISO holders FAQ What machining tasks is this insert best suited for? The TPGT110202 GT9530 Tungaloy indexable insert (SKU 6997883-Tungaloy) is specified for finishing and light universal turning of steel where good surface finish and extended edge life are priorities. Which holders are compatible with this ISO insert? Compatibility is determined by ISO form, relief angle and thickness; holders designed for TPGT 110202 geometry and 2.38 mm plate thickness will accept this insert reliably. How does the GT9530 cermet grade affect tool life? The GT9530 coated cermet composition improves wear resistance under stable cutting conditions, leading to longer intervals between index changes and more consistent surface quality. Is the insert suitable for heavy roughing? This grade and geometry are optimised for finishing and light universal operations; for heavy roughing, a different insert geometry or grade would be recommended. What is the function of the cylindrical hole with countersink? The cylindrical hole with a single-side countersink ensures accurate axial location and secure clamping in standard ISO clamping systems, enhancing mechanical stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high surface quality, GT9530 coated cermet for longer tool life, and precise ISO compatibility to maintain efficient turning operations. Order the inserts directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. TPGT110202 GT9530 ISO turning insert by Tungaloy — coated cermet, 60° triangle The TPGT110202 GT9530 is an ISO-standard turning insert designed for external and internal turning, optimised for finishing to light general turning where a fine surface and reliable wear resistance are required. Coated cermet grade GT9530 Optimised for finishing and light general turning 60° triangular geometry for versatile turning Cylindrical hole with countersink 40°–60° Reliable finishing and consistent surface quality for turning operations This insert is a purpose-built ISO turning insert that combines a coated cermet substrate with geometrical features aimed at producing consistent finishes. The coating and substrate pairing reduces flank wear under stable conditions, which translates into fewer changes and predictable process windows. The triangular 60° form offers flexible insert indexing and suited clamping in standard ISO triangular holders, while the 0.2 mm corner radius helps to balance edge strength with the ability to achieve fine surface roughness. Longer tool life and improved process stability with GT9530 The GT9530 grade is a wear-resistant cermet formulation engineered for finishing to light universal turning applications in steel. Cermet combines the hardness of ceramic phases with the toughness of metallic binders, enabling a longer tool life in steady cutting conditions and an improved finish compared with typical carbide grades. For manufacturers aiming to reduce rework and uphold repeatable quality, this insert delivers measurable benefits in cycle-to-cycle consistency and surface integrity. Compatibility, clamping and chip control for smooth production The insert is supplied in the ISO TPGT110202 format with a cylindrical hole plus a one-sided countersink (40°–60°), enabling secure fastening in compatible holders. The single-sided chipbreaker is optimised for controlled chip formation during finishing passes; pairing the insert with a suitably rigid outside holder and correct cutting data ensures the best results. The body material is carbide, and the plate thickness of 2.38 mm provides the stiffness needed for light-duty finishing without compromising accessibility in tighter geometries. For demanding finishing tasks, choose the Tungaloy GT9530 insert and contact Metav Werkzeuge for availability and tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6997874 SKU: 6997874-Tungaloy Manufacturer SKU: TUN6997874 Brand: Tungaloy Model series: ISO turning inserts Core specifications Geometry angle: 60° Corner radius: 0.2 mm Relief (free) angle: 11° Plate thickness: 2.38 mm Inscribed circle/size: 11 mm Special features Coating/grade: GT9530 (coated cermet) Material: carbide substrate Plate shape: triangular Hole: cylindrical hole with one-sided countersink (40°–60°) Chipformer: single-sided chipbreaker Typical application: external and internal turning; finishing to light general turning Compatibility: ISO-standard inserts for triangular holders FAQ What materials is this insert suitable for? The GT9530 grade is intended primarily for steel turning in finishing to light general turning; the TPGT110202 GT9530 insert performs best under stable cutting conditions that favour a fine surface and reduced flank wear. How should the insert be clamped and which holder type is required? Clamping must match ISO triangular insert holders that accept a 60° triangular geometry and a cylindrical hole with countersink; the TPGT110202 format requires a compatible outside holder or boring bar with correct tolerance class. What cutting edge radius is available and what does it affect? This insert has a 0.2 mm corner radius; a smaller radius helps achieve better surface finish while balancing edge strength for finishing passes. Is GT9530 suitable for roughing operations? GT9530 is a wear-resistant cermet optimised for finishing to light universal turning; for heavy roughing, a tougher grade or different insert geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 NS9530 Wendeplatten - Tungaloy
The combination of a sharp, uncoated cermet cutting edge and a precise 60° triangular geometry ensures superior surface quality and low cutting forces; the 0.2 mm corner radius further refines finish and repeatability. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TPGT 110202 NS9530 — Tungaloy triangular turning insert for finishing The TPGT110202 NS9530 is an ISO-format triangular turning insert engineered for finishing operations on steel, offering a sharp uncoated cermet grade with a controlled corner radius. ISO triangular insert TPGT110202, 60° geometry Uncoated cermet grade NS9530 for finishing Sharp edge for low cutting forces and fine finish Single-sided chipbreaker, with central hole and countersink Achieving superior surface quality with a finishing cermet The uncoated cermet grade NS9530 is formulated as a finishing material for steel, combining a sharp cutting edge with minimal built-up edge tendency. This leads to low cutting forces and consistently improved surface characteristics in continuous cutting scenarios and when using small depths of cut. As a consequence, cycle stability and repeatability are increased, which supports predictable process windows in production environments. The finishing behaviour reduces the need for secondary operations, delivering time and cost savings during component finishing. Designed geometry for stable, ISO-compliant tooling interfaces The triangular 60° plate geometry and the specified corner radius of 0.2 mm are decisive for predictable tool life and part quality. The insert conforms to ISO form and size, so compatibility with holders is governed by matching form, clearance (free) angle, tolerance class, fastening method, dimension and plate thickness. The ISO standardisation simplifies holder selection and inventory management: a correctly matched holder and clamp set ensures accurate positioning and stable cutting conditions, reducing vibration and improving surface integrity. Practical features that support workshop productivity The plate thickness (2.38 mm), single-sided chipbreaker and the central hole with a cylindrical bore plus single-sided countersink (40°–60°) are designed for secure clamping and consistent seating in standard toolholders. Being uncoated preserves the sharpness required for finishing applications, while the chip control geometry is suited to continuous turning. The system approach—ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws—enables fast changes and predictable set-up times, supporting lean workflows and reduced machine downtime. For tailored finishing solutions and availability of Tungaloy inserts contact Metav Werkzeuge for technical advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6997991 SKU: 6997991-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade: NS9530 Type: uncoated cermet Application: turning Numerical data Corner radius: 0.2 mm Included angle: 60° Free (clearance) angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Design & special features Plate form: triangular Hole: with central hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical use: external and internal turning; finishing on steel System: ISO insert with matching holder, shim/clamp set and screws FAQ Is this insert suitable for finishing steel components? Yes. The NS9530 finishing grade is specified for finishing operations on steel; the TPGT110202 insert offers a sharp uncoated cermet edge that produces low cutting forces and a high-quality surface finish. Can the insert be used for internal as well as external turning? Yes. The insert is intended for both external and internal turning when paired with the appropriate holder or boring bar; compatibility depends on matching the ISO form, clearance angle, tolerance class, fastening method, size and thickness. Does the plate require a coated grade for better wear resistance? This particular variant is an uncoated cermet designed for finishing. For applications demanding higher wear resistance, alternative coated grades would be considered, but the NS9530 grade prioritises surface quality and low cutting forces. How does the 0.2 mm corner radius affect machining results? A 0.2 mm corner radius supports improved surface quality and edge strength in finishing cuts; it helps distribute cutting loads and reduces the tendency for edge chipping under stable cutting conditions. What clamping features does the insert have to ensure stability? The plate includes a central hole and a cylindrical bore with a single-sided countersink (40°–60°), enabling secure clamping in compatible ISO toolholders and ensuring consistent seating and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet grade, precise ISO geometry and secure clamping for consistent finishing of steel; order directly via Metav Werkzeuge or ask the consultants for compatibility and application advice. TPGT110202 NS9530 Tungaloy turning insert — triangular 60° finishing geometry TPGT110202 NS9530 is a triangular ISO turning insert designed for precision finishing of steel components in turning operations. *Triangular ISO insert, 60° geometry *Uncoated cermet grade NS9530 for finishing *Sharp cutting edge for low cutting forces *0.2 mm nose radius, 11° clearance angle High-quality finishing through a dedicated cermet grade The use of an uncoated cermet in the NS9530 grade provides a consistent combination of wear resistance and edge stability that is particularly suited to finishing operations on steel. This material choice reduces built-up edge and enables a sharp cutting edge, which in turn lowers cutting forces and supports a superior surface finish. For shops aiming to improve part quality on continuous cuts or small depth-of-cut passes, the material and grade selection delivers measurable process benefits. Reliable fit and clamping for uninterrupted production Compatibility with the toolholder depends on geometry, relief angle, tolerance class, attachment and plate thickness; the ISO-standard design of this insert simplifies selection and replacement within established holder systems. The insert is supplied with a cylindrical hole and single-sided countersink (40°–60°) to match common clamping kits and screws, ensuring a stable seat and repeatable positioning. This secure mechanical interface reduces vibration and supports consistent dimensional results during serial production. Geometry optimised for low forces and surface integrity The triangular plate form with a 60° included angle and a 0.2 mm nose radius focuses contact on a small, controlled cutting zone for finishing passes. A 11° relief angle lowers rubbing on the flank face, which helps to keep cutting forces minimal and heat generation moderate. The combination of geometry and the NS9530 cutting material is designed to yield excellent finishes with reduced need for secondary operations, improving throughput and reducing cycle times. Application range and system considerations Designed primarily for turning, this insert performs best in continuous cutting conditions and small depths of cut where surface quality is paramount. The system approach—insert, appropriate external holder or boring bar, shim/clamping set and replacement screws—ensures that TPGT110202 can be integrated into existing toolsetups with predictable results. Selecting the correct chipbreaker and grade for the workpiece material ensures optimal chip control and tool life, while the ISO conformity supports straightforward stock management. For compatibility checks, application advice or to request a quote for the TPGT110202 NS9530 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997958 Manufacturer SKU: TUN6997958 SKU: 6997958-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPGT110202 NS9530 Tungaloy turning insert Core specifications Nose radius: 0.2 mm Included angle: 60° Relief angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Special features Triangular plate form Uncoated cermet grade NS9530 Single-sided chipbreaker Cylindrical hole with one-sided countersink 40°–60° For turning; finishing applications Material: carbide FAQ What workpiece materials is this insert intended for? The NS9530 grade is an uncoated cermet optimised for finishing steel and is recommended where a sharp edge and high surface integrity are required. Is the insert compatible with standard ISO holders? The insert follows ISO-standard geometry; compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness, so matching the holder to the insert specification is recommended. What chip control can be expected from this geometry? The single-sided chipbreaker and sharp cutting edge of the NS9530 grade produce controlled chips in continuous cuts and small depths, improving surface quality on finishing passes. Can this insert be used for interrupted cuts? While the grade is optimised for continuous finishing, it can be applied in light interrupted conditions if cutting parameters are adapted; heavier interruptions may reduce life and surface finish. What features ensure secure clamping of the insert? The cylindrical hole with a one-sided countersink (40°–60°) is designed for standard clamping kits, providing a stable seat and repeatable positioning when used with the correct shim and screw set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 NS9530 Wendeplatten - Tungaloy
Optimal finishing and consistent production flow result from the combination of the NS9530 uncoated cermet grade and the 0.2 mm corner radius, delivering low cutting forces and excellent surface quality; the ISO triangular geometry with an 11° clearance angle ensures stable seating in standard holders. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. TPGT 110202 NS9530 Tungaloy indexable turning insert — triangular ISO turning insert for finishing steel, uncoated cermet The TPGT110202 NS9530 is an ISO triangular indexable insert designed for precision turning and finishing of steel components, providing a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Uncoated cermet NS9530 for high surface quality 11° clearance angle for low cutting forces 0.2 mm corner radius for fine surface finish Triangular 60° insert with central cylindrical hole Precision finishing for steel with a sharp, wear-resistant cutting edge The NS9530 grade is an uncoated cermet developed for finishing in steel applications. Its composition combines the hardness necessary for sustained edge retention with the toughness required to resist chipping during continuous cuts. As a schlichte (finishing) grade, it produces a high surface quality while keeping cutting forces low, which reduces spindle load and vibration. For workshops seeking repeatable part quality, this insert delivers consistent finishes with small depths of cut, especially where a sharp, reliable edge is essential. Stable seating and ISO compatibility for predictable toolholding Compatibility within ISO insert systems depends on more than shape alone: form, clearance angle, tolerance class, fastening method, size and thickness all determine correct seating. The triangular 60° geometry combined with an 11° clearance angle provides a predictable contact profile in appropriately matched holders and boring bars. This reduces the risk of misalignment or runout and enables straightforward replacement during tool changes. The ISO conformity simplifies stock management and integration into existing tooling systems. Effective chip control and improved productivity in continuous turning The one-sided chipbreaker geometry is tuned for continuous cuts and finishing passes, guiding chips away from the cutting zone to maintain a clean edge and minimise re-cutting. Proper chip control reduces thermal loading on the edge and supports steady cutting conditions, which in turn extends tool life and enhances productivity by lowering scrap rates. The combination of cermet chemistry and optimised chip geometry results in fewer interruptions, better surface finish and stable performance across serial production. Practical workshop features for reliable handling and quick changeovers The insert’s dimensions and features—including 2.38 mm thickness, central cylindrical hole with a single-sided countersink (40°–60°) and a 0.2 mm corner radius—facilitate secure clamping and precise repeatability at re-indexing. The triangular shape offers three cutting edges per index, improving cost efficiency per insert. Material designation as carbide and the clearly defined ISO identification support straightforward replenishment and inventory control in an industrial environment. For engineers and production managers, these aspects translate into less downtime and predictable tool performance. For precision finishing with Tungaloy NS9530 cermet inserts, contact Metav Werkzeuge for application guidance and secure supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6997973 SKU: 6997973-Tungaloy Manufacturer SKU: TUN6997973 Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 0.2 mm Clearance angle: 11° Insert size: 11 mm Thickness: 2.38 mm Insert angle: 60° Special features Material: carbide Cutting material type: uncoated cermet (NS9530) Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Plate form: triangular ISO-standard insert FAQ Which materials is this insert designed for? This insert is specified as a finishing grade for steel; the NS9530 uncoated cermet is optimised for producing high surface quality in steel turning operations. Is the insert compatible with standard ISO holders? Yes, the triangular ISO geometry and defined dimensions ensure compatibility with holders designed for ISO turning inserts when the holder matches form, clearance angle, size and thickness. How does the NS9530 grade affect surface finish? The NS9530 cermet provides a sharp cutting edge and good edge retention, resulting in improved surface quality and lower cutting forces during finishing cuts. What advantages does the one-sided chipbreaker offer? The one-sided chipbreaker is tailored for continuous cuts and helps eject chips reliably, reducing re-cutting and contributing to stable cutting conditions and consistent finishes. What are the key dimensions to check before ordering inserts? Check corner radius (0.2 mm), thickness (2.38 mm), insert size (11 mm), and clearance angle (11°) to ensure fit and performance in the intended holder and operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 NS9530 Wendeplatten - Tungaloy
The combination of a sharp cermet cutting grade and ISO compatibility ensures efficient finishing of steel components with reduced cutting forces and excellent surface quality; the triangular geometry and 0.2 mm corner radius support precise, repeatable external and internal turning operations. Order the insert via Metav Werkzeuge or consult the technical team for application advice. TPGT 110202 NS9530 — Turning insert, uncoated cermet (Tungaloy) TPGT110202 NS9530 Tungaloy insert for ISO-regulated turning, designed as a finishing grade for steel with a sharp cutting edge and low cutting forces Cermet finishing grade NS9530 Sharp cutting edge for fine finishes Triangular ISO insert, 11° clearance 0.2 mm corner radius for precise turning Delivering consistent finishing performance on steel The NS9530 finishing grade is an uncoated cermet optimised for steel applications, providing a sharp cutting edge and low cutting forces that reduce vibration and improve surface integrity. As a finishing-grade cutting solution, the insert is particularly suited to continuous cuts and small depths of cut where surface finish and dimensional accuracy are the priority. The material behaviour of cermet promotes stable edge condition at finishing speeds, which translates into fewer corrective passes and higher process efficiency for precision turning. Designed for reliable ISO tooling integration Compatibility with standard holders is governed by geometric and mounting parameters — form, 11° clearance, tolerance class, clamping method, overall size and thickness. The triangular geometry and the cylindrical hole with a single-sided countersink (40°–60°) provide secure locating and consistent clamping force when paired with the correct insert seat and shim. This mechanical stability supports repeatable tool setting and predictable tool life in production environments that demand tight tolerances and minimal setup variation. Practical geometry and chip control for finishing operations A 0.2 mm corner radius and a plate thickness of 2.38 mm combine to offer precise edge definition for fine turning tasks, while the single-sided chipbreaker manages small chip volumes typical of finishing passes. The insert’s 11 mm inscribed circle and 60° point angle deliver predictable engagement for both external and internal turning where a refined surface is required. Choosing this insert as part of an ISO insert/holder system reduces process variability and helps maintain throughput without compromising component quality. Contact Metav Werkzeuge today for application-specific guidance on the TPGT110202 NS9530 Tungaloy insert and assistance with holder selection — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997974 SKU: 6997974-Tungaloy Manufacturer SKU: TUN6997974 Model series: ISO turning inserts Application: turning Brand: Tungaloy Facts Shape: triangular Inscribed circle: 11 mm Corner radius: 0.2 mm Thickness: 2.38 mm Clearance: 11° Included hole style: with hole; cylindrical hole + single-sided countersink (40°–60°) Point angle: 60° Special features Grade: NS9530 Cutting material: uncoated cermet Substrate: cemented carbide Chipbreaker: one-sided Intended use: finishing of steel Typical application: external and internal turning; continuous cuts and small depths of cut FAQ What materials is this insert suitable for? The TPGT110202 NS9530 Tungaloy insert is formulated as a finishing grade for steel and is recommended where a sharp edge and high surface quality are required. Is the cutting material coated or uncoated? This turning insert uses an uncoated cermet cutting material (NS9530), optimised for low cutting forces and fine surface finishes in finishing operations. Which holders will accept this insert? Compatibility depends on matching the ISO triangular geometry, 11° clearance, plate size and thickness, plus the clamping arrangement; the insert fits standard ISO turning holders designed for TPGT-style plates. What cutting conditions suit the 0.2 mm corner radius? A 0.2 mm corner radius is ideal for fine finishing and small depth-of-cut applications where dimensional accuracy and surface quality are priorities; it supports continuous cuts with controlled chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110202 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade combined with a compact triangular geometry to achieve low cutting forces and clean surface quality in non‑ferrous turning operations. The 60° insert with a 0.2 mm corner radius and 11° clearance delivers consistent chip control and simple integration into ISO tool systems. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TPGT 110202 TH10 Tungaloy turning insert (ISO, triangular, 60°) TPGT110202 TH10 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a sharp universal grade for non‑ferrous materials and low cutting forces. Triangular ISO insert, 60° cutting geometry Sharp uncoated carbide grade TH10 for non‑ferrous 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent cutting performance for non‑ferrous components The TPGT110202 TH10 insert combines a sharp uncoated carbide grade with a triangular 60° geometry to reduce cutting forces and promote clean surfaces when machining aluminium, brass and similar materials. The TH10 grade is formulated for applications where an uncoated edge supports low-friction contact and minimal built-up edge. The result is improved dimensional stability and reduced tendency for smearing on softer alloys, which helps maintain cycle times and part quality in batch production. Geometry engineered for chip control and surface quality A combination of 0.2 mm corner radius and an 11° clearance angle gives a predictable engagement and a fine surface finish without sacrificing edge stability. The single‑sided chipbreaker aids evacuation when turning non‑ferrous materials, reducing re‑cuts and secondary finishing. The insert’s 60° included angle supports versatile toolpath setups for both facing and profiling tasks, while the hole with a one‑sided countersink (40°–60°) ensures secure clamping in ISO holders. System compatibility and straightforward tool assembly Designed as part of an ISO insert system, the plate integrates into standard external holders or boring bars when matched by form, clearance, tolerance class, fastening, size and thickness. The insert’s dimensions—11 mm size and 2.38 mm thickness—make it suitable for compact toolholders and setups where repeatable positioning is required. For complete assemblies, include the matching holder, support/shim, clamping set and replacement screws to ensure reliable fixation and repeatable results. Practical benefits from material choice and chip control Made from carbide and supplied uncoated, this grade is particularly useful where low cutting forces and minimal edge build‑up are priorities. The uncoated cutting edge simplifies regrinding and inspection, while the versatile chipbreaker and sharp geometry reduce the need for aggressive feeds in finishing passes. For operations that prioritise surface integrity and process predictability, this insert offers a cost‑effective balance between performance and ease of use. For reliable turning performance with Tungaloy inserts, request tailored application advice from Metav Werkzeuge or place an order through Metav Werkzeuge’s sales team at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6808909 Manufacturer SKU: TUN6808909 Label / SKU: 6808909-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TPGT110202 Grade / coating: TH10, uncoated Corner radius: 0.2 mm Included angle: 60° Clearance (relief) angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Special features Triangular plate form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Carbide (Hartmetall) substrate System assembly: ISO insert, holder, support/shim, clamping set, replacement screws Typical application: external and internal turning; choose chipbreaker and grade to suit material and stability FAQ What materials is this insert optimised for? The TPGT110202 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated TH10 grade supports low cutting forces and clean surfaces in these applications. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the TPGT110202 fits ISO‑standard triangular holders sized for an 11 mm plate and 2.38 mm thickness. How does the 0.2 mm corner radius affect finishing? A 0.2 mm radius provides a fine surface finish while preserving edge strength for light finishing passes, helping to avoid chatter and reduce secondary polishing. Is the insert coated and can it be reground? The insert is supplied uncoated in a carbide substrate; the uncoated edge simplifies inspection and regrinding for repurposing where appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 GH110 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, robust GH110 Tungaloy grade and precise 0.4 mm corner radius to ensure consistent turning performance; order replacement inserts or request technical advice directly via Metav Werkzeuge if clarification is required. TPGT110204 GH110 Tungaloy insert for turning — triangular 60° geometry TPGT110204 GH110 Tungaloy insert is an ISO-standard triangular indexable carbide insert intended for external and internal turning, offering a one-sided chipbreaker and a cylindrical hole with one-sided countersink for secure clamping. ISO-standard triangular geometry 60° GH110 Tungaloy grade for wear resistance 0.4 mm corner radius for precise profiles Cylindrical hole with countersink 40°–60° Longer tool life through a balanced carbide grade The insert’s GH110 specification, supplied by Tungaloy, combines wear resistance with sufficient toughness to maintain cutting-edge stability under intermittent loads. This balance reduces flank wear and helps to avoid premature edge failure, which in turn extends tool life and reduces downtime. Using a dedicated carbide grade tailored to turning demands improves process reliability and lowers per-part tooling costs by spreading tool expense over more productive cutting time. Precise geometry for stable, repeatable machining The triangular 60° geometry with a 0.4 mm corner radius and one-sided chipbreaker offers reliable profile control and repeatability in finishing and semi-finishing passes. The 11° relief angle and a plate thickness of 2.38 mm ensure stable seat and consistent cutting engagement when paired with a matching ISO holder. The cylindrical hole with a one-sided countersink (40°–60°) supports secure clamping, minimising micro-movement and helping to preserve the insert’s reference edge for accurate, reproducible part tolerances. Designed for ISO-system compatibility and practical use These ISO indexable turning inserts integrate into a system consisting of an insert, suitable external holder or boring bar, a shim or clamp set and replacement screws. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness, so correct matching prevents fitment issues and uneven loading. Typical applications include external and internal turning operations where consistent chip formation and managed wear are required; the one-sided chipbreaker suits a range of steels and worked materials when combined with appropriate cutting parameters. If further process data is needed, technical consultation is available. For precision turning with Tungaloy GH110-grade inserts, contact Metav Werkzeuge for ordering and application advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6808916 Manufacturer SKU: TUN6808916 SKU: 6808916-Tungaloy Designation: TPGT110204 GH110 Model series: ISO turning indexable inserts Facts Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 11° Special features Material: carbide Grade/coating: GH110 (Tungaloy) Plate form: triangular Chipbreaker: one-sided Hole: cylindrical with one-sided countersink (40°–60°) Typical application: turning (external and internal) FAQ What materials is this insert suitable for? The answer depends on application and cutting data, but the TPGT110204 GH110 Tungaloy insert is formulated to offer broad applicability in common turning tasks where wear resistance and edge stability are required. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm radius supports improved surface integrity compared with a sharp edge; it helps distribute cutting loads and is suitable for producing consistent finishes in semi-finish and finish passes. Is the insert compatible with standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the ISO designation indicates it fits holders designed for TPGT110204 geometry when those parameters match. How many cutting edges are available per insert? The triangular plate provides multiple indexed cutting edges inherent to its geometry; correct indexing and secure clamping via the cylindrical hole and countersink maintain repeatable edge positioning. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when installed in the appropriate holder or boring bar configured for the workpiece and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 GH330 Wendeplatten - Tungaloy
TPGT 110204 GH330 Tungaloy Wendeplatte für Drehen — Tungaloy TPGT110204 GH330 Tungaloy-Wendeplatte optimiert produktive Außen- und Innendrehprozesse und bietet hohe Verschleißfestigkeit bei stabiler Schneidkantenperformance TPGT110204 GH330 für produktives Außen- und Innendrehen Hartmetall‑Sorte GH330 für lange Standzeiten ISO‑genormte Form für einfache Halterkompatibilität Zylindrisches Loch mit einseitiger Senkung für sichere Spannung Einseitiger Spanbrecher für kontrollierte Spanbildung Höhere Produktivität durch lange Standzeit und Prozesssicherheit Die TPGT110204 GH330 Tungaloy‑Wendeplatte kombiniert Hartmetall‑Werkstoff mit der speziell abgestimmten Sorte GH330, um eine gute Balance aus Verschleißfestigkeit und Zähigkeit zu liefern. Durch diese Kombination reduziert sich die Standzeitvarianz, was die Rüstintervalle verlängert und die Maschinenauslastung erhöht. Anwender profitieren von konstanter Oberflächenqualität und planbaren Ausfallzeiten, weil die Schneidkante stabil bleibt. Präzise Passform und sichere Befestigung für reproduzierbare Ergebnisse Die dreieckige Plattenform mit Freiwinkel 11° und Eckenradius 0,4 mm sorgt für präzise Kräfteverteilung am Schneidkeil. Das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht eine sichere Klemmung am Halter und minimiert Lageabweichungen beim Spannvorgang. Dadurch ergibt sich eine wiederholgenaue Teilefertigung selbst bei wechselnden Werkzeugwechseln. Einfache Integration in ISO‑Systeme und flexible Einsatzwahl Als Teil der ISO‑Drehwendeschneidplatten‑Modellserie ist die Platte kompatibel mit gängigen Außenhaltern und Bohrstangen; die Auswahl des passenden Spanbrechers und der Sorte richtet sich nach Werkstoff, Bearbeitungsart und Bauteilstabilität. Die einseitige Spanformerung unterstützt eine kontrollierte Spanabfuhr, wodurch Schneidkräfte und Wärmeentwicklung reduziert werden. Zielgruppe und typische Anwendungen Die Platte ist ausgelegt für Anwender in der Serienfertigung und der Einzelteilbearbeitung, die robuste, wirtschaftliche Lösungen für Außen‑ und Innendrehen benötigen. Werkzeug‑Planer schätzen die einfache Zuordnung zur ISO‑Norm sowie die Möglichkeit, durch Auswahl der geeigneten Sorte GH330 die Prozesssicherheit bei unterschiedlichen Zerspanungsbedingungen zu erhöhen. Empfehlung: Die Tungaloy‑Wendeplatte GH330 eignet sich besonders für produktive Drehprozesse mit hoher Wiederholgenauigkeit; bei Fragen zur Halterkompatibilität oder zur optimalen Spanbrecherwahl erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6808923 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TPGT110204 Daten Radius: 0,4 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 2,38 mm Plattengröße: 11 Hersteller SKU: TUN6808923 Besonderheiten Material: Hartmetall Sorte: GH330 (Hochleistungs‑Sorte) Schneidstofftyp: Tungaloy‑Schneidstoffsorte Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: dreieckig Spanbrecher: einseitig ISO‑genormt FAQ Was ist der Hauptvorteil der Platte gegenüber Standard‑Hartmetallplatten? Die TPGT110204 GH330 Tungaloy‑Wendeplatte bietet durch die GH330‑Sorte eine verbesserte Kombination aus Verschleißfestigkeit und Zähigkeit, wodurch sich die Standzeit im Produktionsbetrieb erhöhen lässt. Für welche Bearbeitungsarten ist die Platte vorgesehen? Die Platte ist für Außen‑ und Innendrehen vorgesehen; der einseitige Spanbrecher unterstützt dabei die kontrollierte Spanabfuhr bei unterschiedlicher Stabilität des Bauteils. Wie wird die Kompatibilität zum Halter sichergestellt? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; die ISO‑Genormung der TPGT110204 erleichtert die Auswahl passender Außenhalter und Bohrstangen. Welche Rolle spielt das zylindrische Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung (40°–60°) verbessert die Spannstabilität und reduziert Lageabweichungen während des Betriebs, was zu konstanteren Ergebnissen führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT 110204 GH330 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, GH330 wear-resistant grade and compact 60° triangular form to maintain stable production and predictable tool life; order directly via Metav Werkzeuge or contact our consultants for holder compatibility and process recommendations. TPGT 110204 GH330 — Indexable turning insert (turning) by Tungaloy TPGT110204 GH330 is an ISO-standard triangular indexable insert for external and internal turning, engineered to combine wear resistance and edge stability for a wide range of turning operations. *GH330 grade for wear resistance *Triangular ISO form, 60° included angle *0.4 mm corner radius for finishing *Cylindrical hole with countersink (40°–60°) Reliable cutting performance for consistent cycle times The TPGT110204 GH330 insert is manufactured from carbide and a Tungaloy cutting grade that balances wear resistance and toughness. This balance reduces unexpected edge failure and secures repeatable component quality in serial turning. The triangular 60° geometry delivers a stable cutting edge for both light finishing cuts and medium turning operations; the 0.4 mm corner radius supports improved surface finish without sacrificing edge life. For production planning, the grade’s behaviour at typical cutting speeds and feeds leads to predictable tool-change intervals and smoother scheduling. Seamless integration with existing turning systems Compatibility for ISO indexable inserts is determined by shape, clearance angle (11°), tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with one-sided countersink (40°–60°) enables secure clamping with standard screws and shims; the plate thickness of 2.38 mm and inscribed circle size 11 mm match common ISO holders. Selecting the correct holder or boring bar together with the appropriate shim and clamping set ensures repeatable seat location and vibration control. This clarity simplifies tool assembly and reduces set-up time in workshop environments. Better chip control and edge stability for fewer interruptions The single-sided chipbreaker geometry is tuned to promote predictable chip formation when combined with the GH330 grade, which complements the cutter geometry with increased cutting-edge stability. This results in fewer built-up-edge issues and improved swarf evacuation during continuous turning. Where surface finish and dimensional stability matter, the combination of a defined corner radius and chip control reduces rework and inspection frequency, so machining runs remain efficient and economic. For advice on holder compatibility, to request the TUN6808917 SKU or to discuss application parameters for Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical consultants will help determine the optimal setup for each turning task. Technical data Article number: 6808917 Manufacturer SKU: TUN6808917 SKU: 6808917-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Type designation: TPGT110204 Facts Included angle: 60° Corner radius: 0.4 mm Plate size (inscribed circle): 11 mm Plate thickness: 2.38 mm Clearance angle: 11° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade/sort: GH330 Single-sided chipbreaker Triangular plate form ISO-standard indexable insert Compatible with standard outer holders and boring bars System components: insert, holder/boring bar, shim/clamping set, spare screws Designed for turning (external and internal) FAQ What materials is this insert suitable for? The TPGT110204 GH330 insert, in GH330 grade, is designed for a broad range of turning tasks; its balanced carbide composition provides good wear resistance and edge stability across many steel and alloy applications. How is the insert secured in the holder? The insert features a cylindrical hole with a one-sided countersink (40°–60°) that matches standard clamping screws and shims; correct assembly with the matching holder or boring bar ensures stable fixation. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius gives improved surface finish for finishing and light-medium turning; when combined with the GH330 grade and correct feeds, it supports consistent dimensional quality. Is this insert suitable for internal and external turning? Yes — the ISO triangular geometry and chipbreaker design make the insert appropriate for both external and internal turning operations when used with a compatible holder. Which SKU should be referenced when ordering or enquiring? Reference SKU 6808917-Tungaloy or manufacturer SKU TUN6808917 when enquiring about this Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, ISO compatibility and a fine 0.4 mm corner radius for consistent finishing and longer tool life; order the TPGT110204 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 110204 GT9530 – Tungaloy turning insert (ISO triangular, coated cermet, 60°) A TPGT110204 GT9530 insert for precision external and internal turning, optimised for finishing steel components under stable machining conditions Coated cermet grade GT9530 for finishing ISO‑compliant triangular 60° geometry 0.4 mm corner radius for fine detail Cylindrical hole with 40°–60° countersink High-quality finishing and extended tool life The GT9530 grade is a coated cermet engineered for wear resistance in finishing and light universal turning of steel. Cermet combines ceramic and metallic phases to deliver a hard, heat-resistant cutting edge while the applied coating further improves wear protection and friction behaviour; together these factors support a superior surface finish and extended tool life under steady cutting conditions. The small 0.4 mm corner radius helps produce detailed contours and narrow radii without sacrificing edge strength, which reduces rework and increases process efficiency. Predictable clamping and ISO compatibility for reliable machining This triangular, 60° insert is ISO‑compliant, meaning form, relief angle and tolerance classes match common holder specifications for straightforward integration. The listed 11° relief, 2.38 mm thickness and defined plate size ensure consistent seating and repeatable clamping forces when used with matching external holders or boring bars. The presence of a cylindrical hole with single‑side countersink (40°–60°) provides secure fixation and straightforward replacement, reducing machine downtime and supporting predictable cycle times across production batches. Practical guidance to optimise finishing processes Select the one‑sided chipbreaker and the GT9530 grade when the priority is a fine surface and longer intervals between changes; the chipformer and grade must suit the workpiece rigidity and coolant strategy. For unstable setups or interrupted cuts, consider a different geometry or a more robust grade to avoid edge chipping. If further clarification on holder compatibility, recommended cutting data or suitable chipbreaker variants is needed, technical advice is available — Metav Werkzeuge can advise on matching the insert to the machine, holder and process parameters to achieve the intended outcome. For precise finishing with the GT9530 grade, contact Metav Werkzeuge to confirm holder compatibility and secure supply of the TPGT110204 insert. Technical data Article number: 6997884-Tungaloy Manufacturer SKU: TUN6997884 Manufacturer article number: 6997884 Model series: ISO‑Drehwendeschneidplatten Application: Turning Material: Hartmetall Grade: GT9530 Designation: TPGT110204 Dimensions & core parameters Plate size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.4 mm Shape angle: 60° Relief angle: 11° ISO code: 110204 Features & compatibility Triangular plate form Cylindrical hole with one‑side countersink (40°–60°) One‑sided chipbreaker Coated cermet cutting material Suited for finishing and light universal turning of steel Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The GT9530 grade of the TPGT110204 Tungaloy turning insert is designed primarily for steel finishing and light universal turning operations where surface quality and longer tool life are required. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius on the insert provides a balance between fine detail and edge strength, helping to achieve improved surface finish while maintaining wear resistance during finishing cuts. Is the insert compatible with standard ISO holders? Yes, the triangular 60° geometry and ISO designation (110204) mean the insert is manufactured to ISO norms; however, compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. What is the purpose of the countersunk cylindrical hole? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seating in compatible toolholders, allowing reliable repeatability and simple replacement. Can this insert be used for internal and external turning? The design and grade of the insert suit both external and internal turning; choice of holder and chipbreaker should be matched to the operation and workpiece stability for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet GT9530, 0.4 mm nose radius and ISO conformity for stable finishing cuts; order directly via Metav Werkzeuge or consult the specialists for mounting and batch needs. TPGT110204 GT9530 Tungaloy indexable insert – coated cermet for turning, 60° geometry A TPGT110204 GT9530 indexable turning insert designed for finishing and light universal turning in stable machining conditions. ISO TPGT110204 triangular insert Coated cermet GT9530 for extended life 0.4 mm nose radius for fine surface finish 11° relief and cylindrical hole with countersink Consistent surface quality with a wear-resistant grade The coated cermet GT9530 provides a balance between surface finish and tool life: the coating improves wear resistance while the cermet substrate sustains a sharp cutting edge for finishing passes. In practical terms, this means fewer interruptions for insert changes and a consistent component finish during medium-to-long production runs. The grade is particularly suited to machining steel where a fine workpiece appearance and stable cutting conditions are required. The specification supports a predictable cost-per-part calculation, helping to justify tool selection on efficiency grounds rather than purely on purchase price. Geometry engineered for precision and repeatability The triangular form with a 60° included angle and 0.4 mm nose radius ensures a reliable contact geometry that produces repeatable profiles and predictable toolpath outcomes. The 11° relief angle reduces rubbing on the flank and lowers cutting forces in finishing operations, which in turn helps preserve machine-tool and fixture stability. These geometry choices favour dimensional accuracy and surface integrity: the smaller nose radius is optimised for fine finishing, while the 60° form allows three usable cutting edges per indexable insert, improving overall productivity per insert. Secure mounting and system integration for smooth handling The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match common clamping systems. The 2.38 mm plate thickness and ISO form conform to standard holder interfaces, so compatibility with suitable external holders or boring bars is determined by form, relief angle, tolerance class, fastening and size. A complete system approach — insert, holder, shim/underlay and correct fastening hardware — ensures optimum chip control and stability. The single-sided chipbreaker is designed to promote consistent chip formation during finishing and light turning, reducing the risk of chip interference and facilitating unattended machining. Application focus and process advantages Designed for turning tasks where surface quality and extended stand time matter, this insert performs best under stable, well-fixtured conditions. As a finishing-to-light-universal grade, the component is not intended for heavy roughing but excels when accurate contours and surface finish are the priority. The combination of coated cermet chemistry and precision geometry supports reduced secondary operations and lower rework rates, delivering measurable gains in process reliability. For production environments seeking repeatable results and less downtime, this insert offers a sensible balance of performance and longevity. For high-quality finishing and reliable tool life with Tungaloy GT9530, contact Metav Werkzeuge for tailored recommendations and order placement. Technical data Article number: 6997875 Facts Manufacturer SKU: TUN6997875 Shape: triangular (60° included angle) Nose radius: 0.4 mm Plate thickness: 2.38 mm Size: 11 Relief angle: 11° Special features Grade: GT9530 Cutting material: coated cermet Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Model series: ISO indexable turning inserts Typical application: turning (finishing to light universal) FAQ Which materials is this insert best suited for? The TPGT110204 GT9530 insert is specified for machining steel and performs particularly well where a high-quality surface finish and longer stand time under stable conditions are required. What surface finish can be expected from a 0.4 mm nose radius? A 0.4 mm nose radius on a geometrically stable insert like this one provides fine surface quality in finishing passes; the smaller radius reduces scallop height while maintaining edge strength for consistent results. How does the mounting design affect compatibility with holders? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with one-sided countersink allows secure clamping in standard ISO-compatible holders and boring bars when paired with the correct underlay and screws. Is this insert suitable for heavy roughing operations? The GT9530 grade is a wear-resistant finishing to light universal type; it is optimised for surface quality and extended stand time rather than heavy roughing, so for aggressive material removal a different grade would be preferable. How many cutting edges are available per insert and what is the effect on productivity? The triangular geometry provides three cutting edges per indexable insert, improving edge utilisation and reducing the frequency of insert replacements, which supports higher overall productivity in stable turning processes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 NS520 Wendeplatten - Tungaloy
Benefit from the NS520 cermet grade and the precise 0.4 mm corner radius to achieve consistent surface finish and predictable wear in finishing cuts; the ISO triangular geometry ensures straightforward compatibility with standard holders. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. TPGT110204 NS520 Tungaloy turning insert — ISO triangular insert for finishing in turning TPGT110204 NS520 Tungaloy turning insert is an ISO‑normed triangular insert designed for finishing to light turning of steel, optimised for surface quality and dimensional stability Cermet grade NS520 for high surface quality ISO triangular geometry with central hole and countersink 0.4 mm corner radius for fine finishing One‑sided chipbreaker for controlled chip formation Achieve superior surface quality with a specialised cermet grade The NS520 cermet composition is developed for finishing and light machining of steel, where surface integrity and dimensional accuracy are paramount. The fine, wear‑resistant cutting edge reduces built‑up edge and ensures more uniform flank wear, which directly improves component tolerance and reduces rework. For shops aiming to deliver consistent finishes on turned parts, the combination of the cermet substrate and the optimised edge preparation yields longer intervals between tool changes and more predictable process windows. ISO geometry and secure clamping reduce setup risk The ISO triangular form (TPGT) with a 60° included angle and a central hole with cylindrical bore plus one‑sided countersink means the insert seats reliably in ISO holders and boring bars. The defined 11° clearance ensures the correct tool‑to‑workpiece contact angle for finishing cuts, while the 2.38 mm plate thickness contributes to stable clamping. These established standards simplify tooling selection and lower the risk of mismatched assemblies, allowing quick changeovers and repeatable positioning across machines and operators. Controlled chip flow and improved process stability A single‑sided chipbreaker tailored to light cutting conditions promotes consistent chip segmentation and evacuation, which reduces vibration and heat concentration at the cutting edge. Stable chip control leads to better surface finish and longer edge life, and it supports higher feed rates without sacrificing part quality. Manufacturers seeking efficient, reproducible turning operations will benefit from the reliable chip formation and the consequent reduction in machine downtime and part inspection rejects. For application advice or fast supply of Tungaloy inserts, contact Metav Werkzeuge — technical consultants available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the suitability of the NS520 grade and compatible holders Technical data Article number: 6808913 SKU (manufacturer): TUN6808913 SKU: 6808913-Tungaloy Label: TPGT110204 NS520 Tungaloy-Wendeplatte Manufacturer article number: 6808913 Core specifications Geometry: TPGT110204 (ISO 110204) Angle: 60° Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 2.38 mm Clearance angle: 11° Design & special features Material: cermet (coated or uncoated cermet grade NS520) Chipbreaker: one‑sided Hole: with cylindrical bore and one‑sided countersink (40°–60°) Plate form: triangular Typical application: turning, finishing to light machining of steel FAQ What workpieces is this insert best suited for? The TPGT110204 NS520 insert is optimised for finishing and light turning of steel, where surface quality and dimensional accuracy are required. How does the NS520 grade improve edge life? The NS520 cermet composition reduces adhesive wear and provides a stable cutting edge, resulting in more uniform wear and longer usable edge life during finishing operations. Is the insert compatible with standard ISO holders? Yes; the TPGT geometry with central hole and countersink is designed for compatibility with standard ISO triangular holders and appropriate clamping sets. Which feature ensures fine surface finishes? A combination of the 0.4 mm corner radius, the cermet cutting material, and the tailored chipbreaker delivers the fine finishes expected in finishing cuts. Can this insert be used for heavier roughing cuts? The insert is specified for finishing to light machining; for heavy roughing, a grade and geometry designed for higher mechanical loads should be chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of an ISO‑standard turning insert that combines a finishing-grade uncoated cermet with precise geometry for reduced cutting forces and superior surface quality; order directly via Metav Werkzeuge or request application advice from our consultants. TPGT110204 NS9530 Tungaloy turning insert — finishing grade, uncoated cermet, 11° relief The TPGT110204 NS9530 Tungaloy insert is an ISO‑standard triangle‑form turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Precision finishing for steel with sharp cutting edge Uncoated cermet for superior surface finish Triangle form with 60° included angle 11° relief angle for low cutting forces Superior surface quality from a finishing grade The uncoated cermet grade NS9530 is developed as a finishing grade for steel, delivering a sharp cutting edge and excellent wear resistance that together produce a consistently fine surface finish. In practice, this means fewer follow‑up operations and less time spent on manual finishing. Cermet combines a ceramic phase with metallic binder to give a stable cutting edge at light cutting depths; for continuous turning and small feeds it outperforms many conventional grades when surface integrity is the priority. Geometry engineered for predictable turning performance The triangular plate with a 60° included angle and 0.4 mm corner radius offers a balance between edge strength and fine detail, while the 11° relief angle reduces rubbing and cutting forces during engagement. The single‑sided chipbreaker is tuned for finishing cuts, promoting controlled chip flow and minimising vibration in stable setups. These geometric features make the insert particularly effective for finishing passes on external and internal turning where dimensional accuracy and surface finish are critical. Material choice and machining behaviour explained Made from cemented carbide substrate with an uncoated cermet specification, the grade emphasises edge sharpness and low cutting resistance rather than heavy roughing removal. This results in lower cutting forces and reduced heat generation at the cutting edge during finishing operations. For operators less familiar with cermet, it is a hard, wear‑resistant material that retains a keen edge—ideal for producing fine finishes but best used at modest feeds and depths of cut to avoid chipping under interrupted cuts. System compatibility and practical mounting details The insert is ISO‑standard and its compatibility with a holder depends on form, relief angle, tolerance class, fastening style, size and thickness. It is supplied in a triangle form with a central hole (cylindrical hole with a single‑sided countersink 40°–60°) for secure clamping in a matching external holder or boring bar. Typical system components include an ISO turning holder, a clamping pad or set, and replacement screws; correct matching of those parts ensures repeatable seating and concentricity for stable finishing results. For application advice, availability or to secure the Tungaloy finishing insert with NS9530 performance, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge will advise on compatibility and delivery options Technical data Article number: 6997959 Manufacturer SKU: TUN6997959 SKU: 6997959-Tungaloy Name: TPGT110204 NS9530 Tungaloy insert Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Size: 11 mm Included angle: 60° Relief angle: 11° Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Single‑sided chipbreaker for controlled chips Triangle form (TPGT) with central hole for secure clamping ISO‑standard turning insert suitable for external and internal turning FAQ What materials is this insert intended for? The TPGT110204 NS9530 Tungaloy insert is optimised as a finishing grade for steel, delivering excellent surface quality during continuous cuts and small depths of cut. Is the insert coated? No, this insert uses an uncoated cermet grade (NS9530), chosen to maintain a sharp cutting edge and to improve surface finish in light finishing operations. How is the insert mounted in a holder? The insert uses a central hole with a cylindrical bore and a single‑side countersink; it is clamped in a matching ISO holder using the appropriate pad and screw to ensure correct seating and stability. What is the corner radius and where is it beneficial? The insert has a 0.4 mm corner radius, which balances edge strength with the ability to produce fine surface finishes, making it suitable for precision external and internal finishing passes. Can this insert be used for roughing? This grade is a finishing specification and performs best at small depths of cut and continuous feeds; for heavy material removal or interrupted cuts, a more robust roughing grade is recommended. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 110204 NS9530 Wendeplatten - Tungaloy
Data conflict: the item is specified both as "carbide" and as an "uncoated cermet". Please verify the correct cutting material to ensure accuracy and avoid potential issues during application or usage, as the distinction between these materials is critical for determining their suitability in specific machining operations, performance characteristics, and compatibility with the intended workpiece material, which could lead to suboptimal results or even damage if the wrong material is selected; therefore, it is essential to confirm whether the item in question is indeed a carbide tool or an uncoated cermet to maintain precision, reliability, and efficiency in the manufacturing process.
TPGT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that combines a sharp cutting edge, low cutting forces and consistent ISO compatibility for reliable turning performance; order the TPGT 110204 NS9530 from Metav Werkzeuge or consult the machining specialists for process alignment. TPGT 110204 NS9530 – Turning insert for ISO-standard finishing by Tungaloy TPGT110204 NS9530 is an ISO‑standard triangular insert engineered for finishing turns on steel, offering a sharp edge and a 0.4 mm corner radius for outstanding surface quality Triangular insert, 0.4 mm corner radius Uncoated cermet for high surface finish Sharp edge reduces cutting forces ISO standard with centre hole and countersink Consistent finishing performance for steel turning The insert delivers repeatable results in finishing applications by combining an uncoated cermet grade with a refined geometry that lowers cutting forces and promotes a superior surface finish. The design reduces built‑up edge and supports continuous cuts and small depths of cut with stable performance. For converters of process data, the 11° clearance and the 0.4 mm corner radius are decisive parameters affecting feed and finish; these values assist in selecting feeds and speeds that balance tool life and component quality. Designed for straightforward fitting and ISO compatibility Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation and standard dimensions ensure easy substitution into existing tool systems. The insert’s centre hole with a cylindrical bore and a single‑side countersink (40°–60°) provides reliable locating and secure clamping in common ISO turning holders. The triangular form and standardised thickness simplify tool inventory and reduce machine downtime during changeovers. Why the NS9530 cermet grade benefits finishing operations The NS9530 grade is an uncoated cermet developed for finishing steel, offering a notably sharp cutting edge and low cutting forces. Cermet chemistry and microstructure support excellent edge stability and reduced adhesion at the cutting zone, which translates into finer surface integrity and longer intervals between dressing or edge replacement for delicate components. In practice, this means fewer secondary operations and a reduced risk of rework on finished parts. Process reliability and application guidance For optimal results, pair the insert with a suitable external holder or boring bar and select a chipbreaker that matches the workpiece material and machining stability. The one‑sided chipbreaker on this insert is tailored to finishing cuts, controlling chip flow without aggressive interruption of the cut. When setting up, consider modest feed rates and the insert’s geometric data—2.38 mm thickness, 11 mm size and 60° included angle—to achieve the targeted balance of surface finish and tool life. For precision finishing on steel with the Tungaloy NS9530 grade, request the TPGT 110204 insert from Metav Werkzeuge or contact our consultants for tailored machining recommendations Technical data Article number: 6997992-Tungaloy Manufacturer SKU: TUN6997992 Manufacturer article number: 6997992 Model series: ISO turning inserts Core specifications Insert designation: 110204 Corner radius: 0.4 mm Clearance angle: 11° Insert size: 11 mm Thickness: 2.38 mm Included angle: 60° Special features Shape: triangular Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Grade: NS9530 (uncoated cermet) Material: carbide Application: turning Typical use: finishing, continuous cuts, small depths of cut Compatibility: ISO standard; fit depends on form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert suitable for? The TPGT110204 NS9530 insert is specified for finishing on steel and the NS9530 cermet grade is optimised for steel turning to deliver low cutting forces and high surface quality. How does the NS9530 grade differ from coated grades? NS9530 is an uncoated cermet grade that provides a very sharp cutting edge and excellent surface finish in finishing operations; it differs from coated grades by offering improved edge stability for fine turning rather than the extended wear resistance of coated variants. What clamping features are required for correct seating? Proper seating requires a holder matching the ISO form, clearance and tolerance class; the centre hole and single‑side countersink of the insert ensure secure locating and clamping in compatible ISO turning holders. Can this insert be used for interrupted or heavy roughing cuts? The triangular finishing geometry and cermet grade are optimised for continuous finishing cuts and small depths of cut; for heavy or interrupted roughing, a more robust grade and geometry are recommended. What is the effect of the 0.4 mm corner radius? A 0.4 mm corner radius balances improved surface finish and acceptable edge strength for finishing; it assists in distributing cutting forces and reduces the risk of microchatter on fine passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 110204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, a sharp uncoated carbide grade and precise dimensions for efficient, low‑force turning of non‑ferrous components; order the inserts directly from Metav Werkzeuge or consult the technical team for application advice. TPGT110204 TH10 Tungaloy indexable insert – ISO triangular 60° for turning The TPGT110204 TH10 is an ISO‑standard triangular indexable insert engineered for external and internal turning, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes. Universal TH10 grade for non‑ferrous materials Triangle 60° geometry for versatile turning 0.4 mm corner radius for controlled finish Cylindrical hole with single‑side countersink Consistent surface quality with reduced cutting forces The combination of a sharp, uncoated carbide cutting edge and the TH10 grade supports lower cutting forces and excellent surface appearance when machining softer, non‑ferrous workpieces. The insert’s geometry—a 60° triangular shape with a 0.4 mm corner radius—balances strength and edge accessibility, helping to maintain dimensional accuracy on both external and internal contours. For engineers seeking repeatable finishes, the uncoated carbide edge reduces built‑up edge formation in appropriate materials, simplifying downstream finishing operations. Secure clamping and standardised interchangeability Designed to the ISO insert family, the plate fits holders and boring bars that match by form, relief angle, tolerance class, clamp method, size and thickness. The 11° relief angle and the insert’s 2.38 mm thickness ensure stable seating under cutting loads, while the cylindrical hole with a single‑side countersink (40°–60°) provides reliable location and fastening. The standardisation of dimensions means quicker tool changes and predictable tool life across compatible toolholders, supporting efficient setup times on the shop floor. Material suitability and economical machining strategy The insert is produced from carbide in an uncoated finish and the TH10 specification, making it particularly suitable for messing (brass), aluminium and similar alloys where a sharp edge and clean chip formation are priorities. The single‑sided chipbreaker aids controlled chip formation for turning operations, reducing risk of entanglement and helping maintain throughput. Choosing this insert as part of a matched holder and clamping set allows a cost‑effective approach to everyday turning tasks while preserving surface quality and process stability. Contact Metav Werkzeuge today for tailored application advice or to request compatibility checks for tooling systems and holders Technical Data Article number: 6808915 SKU: 6808915-Tungaloy Manufacturer SKU: TUN6808915 Brand: Tungaloy Model series: ISO indexable turning inserts Insert designation: TPGT110204 Type: Triangle 60° insert Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Plate size: 11 Thickness: 2.38 mm Special features Material: Carbide Grade/coating: TH10 (uncoated) Shape: Triangular Hole style: Cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: Single‑sided Application: Turning; external and internal Typical use: Non‑ferrous materials, low cutting forces, clean surfaces FAQ What materials is this insert best suited for? The TPGT110204 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide and TH10 grade promote low cutting forces and clean surface results. How does the triangular 60° geometry affect application? A 60° triangular insert offers multiple cutting edges and access to a variety of turning profiles; the TPGT110204’s geometry supports both external and internal turning while maintaining edge strength. Is the insert compatible with any ISO triangular holder? Compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness; the TPGT110204 follows ISO dimensions and fits holders specified for that family when these criteria align. What is the benefit of the cylindrical hole with countersink? The cylindrical hole plus a single‑side countersink (40°–60°) provides secure, repeatable fastening and accurate location in the toolholder, improving stability during machining. Can this insert be used for hardened steels? The TPGT110204 TH10 is specified for non‑ferrous and similar materials; it is not intended for machining hardened steels where specialised grades and coatings are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 110204 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp uncoated cemented-carbide edge, the 0.4 mm corner radius and ISO conformity to maintain consistent surface quality and low cutting forces in non-ferrous turning operations; order the insert directly via Metav Werkzeuge or consult our technical staff for selection support. TPGT 110204 TH10 Tungaloy — ISO triangular turning insert, uncoated carbide, 11° clearance A TPGT 110204 TH10 Tungaloy triangular ISO turning insert for external and internal turning, designed to deliver low cutting forces and clean surface finishes in non-ferrous material machining. ISO TPGT 110204 format, triangular insert Uncoated cemented carbide grade TH10 11° clearance angle, 0.4 mm corner radius Cylindrical hole with single-sided countersink High-precision turning with a sharp, uncoated edge The TPGT 110204 TH10 insert is an ISO-standard triangular cutting plate made of uncoated cemented carbide, optimised as a sharp universal grade for non-ferrous materials. The uncoated cutting edge helps to reduce adhesion and built-up edge when machining aluminium and similar alloys, which in turn supports lower cutting forces and a clean surface finish. The moderate 0.4 mm corner radius balances edge strength and surface quality: a small radius favours fine finishes, while still providing sufficient edge support for stable cuts. Secure mounting and system compatibility for reliable repeatability Compatibility with toolholders is governed by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure accurate seating and secure clamping in matching holders or boring bars. In practice this means a stable interface with the outer holder, plus the usual supporting parts such as a shim or clamping set and replacement screws for swift plate changes. ISO conformity simplifies holder selection and keeps setup times short. Efficient production through appropriate chip control and selection The single-sided chipbreaker supports controlled swarf formation in the targeted material classes; selecting the correct chipbreaker and grade in line with workpiece material, machining type and machine/tool stability reduces downtime and increases productivity. Important dimensional data such as 2.38 mm plate thickness, size 11 and the 11° clearance contribute to the assembly stiffness and cutting behaviour; the 60° triangular form provides three usable cutting edges per index. Choosing the right combination of holder rigidity and feed rates with this insert delivers repeatable, productive turning results and longer effective tool life. For availability and tailored selection of the Tungaloy TH10 turning insert contact Metav Werkzeuge for expert advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808920 SKU: 6808920-Tungaloy Manufacturer SKU: TUN6808920 Manufacturer: Tungaloy Facts Plate thickness: 2.38 mm Plate size: 11 Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features ISO designation: TPGT110204 Grade: TH10 (uncoated) Material: cemented carbide Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) System: compatible with matching holder, shim/clamp set and replacement screws FAQ What materials is this insert best suited for? The TPGT 110204 TH10 insert is formulated as a sharp universal grade for non-ferrous materials, giving low cutting forces and clean surfaces when machining aluminium and similar alloys. How does the 0.4 mm corner radius affect finishing and edge life? A 0.4 mm corner radius on the TPGT 110204 balances fine surface finish with adequate edge strength; it favours good finishes while maintaining resistance against edge chipping under appropriate cutting conditions. Is this insert compatible with standard ISO toolholders? Yes — the insert follows ISO specifications; compatibility with a holder depends on matching form, clearance angle, tolerance class, fastening, size and thickness. The cylindrical hole and countersink ensure reliable clamping in compliant holders. Which chipbreaker should be chosen for stable turning? The single-sided chipbreaker supplied with this plate is suitable for many turning tasks in non-ferrous materials; selection should consider material, feed and stability, aiming for controlled swarf and consistent surface quality. What are the key dimensions to check when ordering replacement plates? Check the ISO designation (TPGT110204), plate size (11), thickness (2.38 mm), corner radius (0.4 mm) and clearance angle (11°) to ensure correct fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110204 UX30 Wendeplatten - Tungaloy
Combining the sharp-edge UX30 grade with ISO compatibility and a 0.4 mm corner radius, this insert delivers low cutting forces and reliable chip formation for a smooth turning process. Order the TPGT110204 UX30 Tungaloy insert directly via Metav Werkzeuge or contact our consultants for holder compatibility and application advice. TPGT110204 UX30 Tungaloy — ISO triangular turning insert with 60° geometry and 11° clearance A TPGT110204 UX30 ISO triangular insert engineered for external and internal turning where low cutting forces and consistent chip control are prioritised. Sharp-edge UX30 grade for low cutting forces Uncoated carbide for stable chip formation 60° triangular geometry for versatile turning 0.4 mm corner radius for fine detail Cylindrical hole with countersink for secure clamping Lower cutting forces and consistent chip control for higher throughput The TPGT110204 is manufactured in the UX30 grade as an uncoated cemented carbide insert, providing a particularly sharp cutting edge that reduces cutting resistance. This characteristic leads to lower cutting forces, which in turn decreases machine load and vibration in many turning scenarios. Reduced forces help maintain dimensional stability on long or slender parts and often permit higher feed rates without compromising surface finish, delivering measurable improvements in productivity on batch and single-piece production alike. Reliable fit and secure clamping to reduce setup time Designed to the ISO-standard geometry, the triangular insert features a 60° included angle and is intended for use with matching external holders or boring bars. The insert’s 11° clearance and 2.38 mm thickness combine to give a stable seating and repeatable orientation in the pocket. The cylindrical hole with a one-sided countersink (40°–60°) facilitates secure clamping with standard screws and locators, reducing set-up variations and tool-change time. Clear compatibility criteria — form, clearance, tolerance class, fixing method, size and thickness — ensure straightforward matching to holders and clamping kits. Precision surface quality and application guidance for turning tasks With a 0.4 mm radius, the insert is well suited to light finishing and detail work where a fine corner radius improves surface integrity. The single-sided chipbreaker encourages predictable chip formation when machining a broad range of materials; selection of the appropriate chipbreaker and grade should be matched to the workpiece material, cutting parameters and machine stability. For external and internal turning operations, pairing the insert with a rigid holder and correct seating reduces chatter and secures repeatable results. The geometry and grade combination makes this insert a practical choice where low forces and controlled swarf evacuation are essential. For reliable low-force turning with the proven UX30 grade, contact Metav Werkzeuge for application advice and ordering of Tungaloy inserts — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical data Article number: 6808921 SKU: 6808921-Tungaloy Manufacturer SKU: TUN6808921 Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 0.4 mm Relief (clearance) angle: 11° Included angle: 60° Thickness: 2.38 mm Size (inscribed circle): 11 Features / Materials Material: cemented carbide (uncoated) Grade: UX30 Shape: triangular Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) ISO-standard insert FAQ What materials is the TPGT110204 UX30 insert best suited to machine? The TPGT110204 UX30 insert is designed for general turning applications where low cutting forces and reliable chip formation are required; the uncoated cemented carbide grade performs well across a wide range of steels and common engineering materials when paired with the appropriate chipbreaker and cutting parameters. How does the 0.4 mm radius affect finishing and strength? A 0.4 mm corner radius on the TPGT110204 balances surface finish and edge strength: it enables finer surface quality during finishing cuts while still providing sufficient edge support for light interrupted cuts and semi-finish operations. What does the hole style mean for clamping reliability? The cylindrical hole with a one-sided countersink (40°–60°) on the insert ensures positive seating and consistent screw engagement; when used with the correct clamping set and pocket geometry, the result is secure clamping and repeatable positioning for series production. Can the insert be used for both external and internal turning? Yes, the ISO triangular geometry and the specified clearance angle make the insert suitable for both external and internal turning applications provided the holder and set-up deliver the required rigidity and access. Which parameters should be checked for holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; verify that the chosen holder matches these attributes for the TPGT110204 to ensure correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110208 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the technical specification lists both cermet and cemented carbide as the cutting-material type. A reliable product description cannot be generated from these conflicting material entries. Please provide corrected or consistent information about the insert's substrate or cutting-material specification so a complete, accurate description can be produced. Without accurate and consistent data regarding the cutting-material type, it becomes challenging to ensure that the product description aligns with the actual material properties, performance characteristics, and intended applications, which are critical for users to make informed decisions. Clarifying whether the material is cermet or cemented carbide will help resolve this issue effectively.
TPGT 110208 NS9530 Wendeplatten - Tungaloy
High-precision finishing performance with an uncoated cermet cutting edge and low cutting forces guarantees superior surface quality and stable process results; compatible with ISO holders when matched by form, clearance angle and thickness. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal cutting parameters. TPGT 110208 NS9530 – Turning insert (ISO triangular) by Tungaloy The TPGT110208 NS9530 is an ISO triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge and controlled chip formation for continuous cuts ISO triangular insert TPGT110208 NS9530 Uncoated cermet for finishing steel Sharp cutting edge for low cutting forces With centre hole and 40°–60° countersink Delivering consistent finishing quality with an uncoated cermet grade The NS9530 grade is an uncoated cermet specifically formulated as a finishing sort for steel, providing a sharp cutting edge that reduces burr formation and lowers cutting forces. Compared with conventional carbide grades, cermet inserts often produce a higher surface finish for continuous cuts and small depths of cut because the cutting edge retains sharpness and resists edge deformation. The combination of the material's properties and the insert geometry means operators gain measurable improvements in workpiece finish and dimensional consistency without complex process adjustments. When surface integrity and repeatable part quality are priorities, this grade offers a clear technical advantage. ISO compatibility and correct clamping for stable machining This insert follows ISO conventions for indexable turning plates and must be paired with a compatible holder by matching form, clearance angle, tolerance class, attachment, size and thickness. The plate is triangular with an effective size of 11 mm, a 0.8 mm corner radius and a 11° clearance angle, and it is supplied with a centre hole featuring a cylindrical bore and a single-side countersink (40°–60°). For a complete system, select the appropriate outer holder or boring bar together with the required shim/clamping set and spare screws to ensure secure seating and repeatable location. Correct clamping minimises vibration and secures the insert at the intended cutting geometry, which is essential for achieving the advertised finishing results. Practical advantages in production and process security Using a finishing insert such as this one reduces machining variability: the low cutting forces lower spindle and workpiece deflection, while the optimised chip control of a single-sided chipbreaker supports continuous cutting conditions. These attributes help to extend tool life and maintain a consistent part surface across long runs, contributing to higher productivity and fewer rework cycles. The plate’s geometry and the NS9530 grade are geared towards process stability and predictable performance; when paired with the right holder and cutting parameters, the insert supports efficient, high-quality turning in repetitive production environments. For finishing-focused turning tasks, select the Tungaloy NS9530 finishing insert through Metav Werkzeuge and arrange a consultation to confirm holder compatibility and recommended cutting parameters. Technical data Article number: 6997960 SKU: 6997960-Tungaloy Manufacturer SKU: TUN6997960 Model series: ISO-Drehwendeschneidplatten Designation: TPGT110208 NS9530 Facts Corner radius: 0.8 mm Plate size: 11 mm Plate thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Special features Uncoated cermet grade NS9530 Intended application: Turning (finishing) Chipbreaker: single-sided Plate shape: triangular Centre hole: cylindrical with single-side countersink (40°–60°) Suitable for continuous cuts and small depths of cut System components: ISO insert, outer holder/boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for finishing steel? The TPGT110208 NS9530 is a finishing cermet grade designed for steel; it delivers a sharp edge and low cutting forces to enhance surface quality. Which holder features are required for correct mounting? Compatibility requires matching the insert form, 11° clearance angle, plate thickness (2.38 mm), size (11 mm) and the centre-hole/countersink arrangement to the chosen holder or boring bar. What advantages does cermet NS9530 offer over coated carbide for finishing? NS9530 provides a very sharp edge geometry and good heat resistance for continuous finishing cuts, resulting in improved surface finish and reduced burr formation compared with some coated carbide grades. Can this insert be used for interrupted cuts or heavy roughing? The TPGT110208 NS9530 is optimised as a finishing sort for continuous cutting and small depths of cut; for interrupted or heavy roughing, a more robust grade and different geometry are recommended. How does the centre-hole and countersink affect clamping and stability? The cylindrical centre hole with single-side countersink (40°–60°) allows reliable axial positioning and clamping torque distribution, contributing to repeatable insert seating and machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110208 UX30 Wendeplatten - Tungaloy
Combining a sharp cutting edge, the UX30 uncoated carbide grade and a 0.8 mm corner radius, this insert delivers low cutting forces and consistent chip formation for efficient turning. Order the TPGT110208 UX30 insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT110208 UX30 Tungaloy indexable turning insert – triangular 60° design A TPGT110208 UX30 triangular indexable insert for turning, engineered for low cutting forces and reliable chip control in external and internal turning operations Sharp cutting edge for low cutting forces UX30 uncoated carbide grade ISO triangular insert, 60° included angle Single-sided chipbreaker, 0.8 mm radius Increased efficiency through reduced cutting forces The UX30 grade is an uncoated carbide designed with a sharp cutting edge, which lowers cutting forces and improves material removal efficiency during turning. Reduced cutting forces help to decrease tool vibration and load on the machine spindle, resulting in longer tool life and more predictable process stability. This effect is particularly beneficial when machining materials that form long or stringy chips, as the combination of grade and geometry promotes controlled chip formation and easier evacuation from the cut. The result is a more productive machining cycle with fewer interruptions for chip clearing. Straightforward compatibility and reliable clamping for predictable results This indexable insert conforms to the ISO system and features a 60° included angle with an 11° relief and a 2.38 mm thickness, so compatibility with holders depends on matching form, relief angle, tolerance class, clamping and size. Checking these parameters ensures correct seating and repeatable positioning when mounting an insert into a compatible external holder or boring bar. Correct clamping via the central hole—designed as a cylindrical hole with a one‑sided countersink (40°–60°)—prevents lift and ensures stable contact under cutting loads, which in turn supports consistent surface finish and dimensional accuracy over multiple indexings. Better chip control and balanced edge strength for versatile turning The one‑sided chipbreaker works with the 0.8 mm radius to balance edge strength and finish capability, making the insert suitable for a range of turning tasks from light finishing to moderate stock removal. A moderate corner radius provides improved component edge quality while retaining enough robustness for intermittent cuts or varying feed rates. The triangular shape offers three cutting edges per indexable insert, reducing tool change frequency and improving economic efficiency. Together, these features deliver a practical solution for turning where stable chip formation and repeatable performance are required. For precision turning with Tungaloy’s UX30 grade, contact Metav Werkzeuge for tailored advice and prompt delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6808928 Manufacturer SKU: TUN6808928 Model series: ISO turning indexable inserts Designation: TPGT110208 UX30 Manufacturer: Tungaloy Core data Inscribed circle / size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Hole style: cylindrical hole + one-sided countersink 40°–60° Special features Grade: UX30 Material: carbide (uncoated) Chipbreaker: single-sided Shape: triangular Application: turning (external and internal) Compatibility: form / relief angle / tolerance class / clamping / size / thickness FAQ What applications suit this triangular insert best? The TPGT110208 UX30 insert is intended for external and internal turning where low cutting forces and reliable chip formation are priorities. Which material is the insert made from? This insert uses uncoated carbide in the UX30 grade, selected for a sharp edge and consistent chip control during turning. How does the insert’s hole design affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) on the TPGT110208 UX30 supports secure clamping and correct seating in compatible holders, reducing the risk of misalignment. What edge radius and relief angle are provided? The insert has a 0.8 mm corner radius and an 11° relief angle, offering a compromise between edge strength and surface finish capability. Is this insert compatible with ISO tooling systems? Yes, the insert adheres to ISO specifications for triangular turning inserts; matching holder form, tolerance class and clamping ensures correct compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, easy integration into ISO tool systems and durable uncoated cermet cutting properties to maintain consistent surface quality in serial turning. Order directly via Metav Werkzeuge or consult the technical team for process recommendations and availability. TPGT 110302 NS9530 — ISO triangular turning insert with W15 chipbreaker and 11° relief by Tungaloy A TPGT110302L-W15 NS9530 turning insert designed for precise external and internal turning, optimised for fine finishing of Stahl under continuous-cut conditions ISO triangular insert, format 110302 Uncoated cermet NS9530 for fine finishing 11° relief with 0.2 mm corner radius Cylindrical hole with 40°–60° countersink Achieve superior surface quality with a sharp cermet edge The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge that reduces cutting forces and supports high-quality finishes on Stahl. Cermet is a metal-ceramic composite that combines ceramic wear resistance with metallic toughness; this balance retains edge geometry longer than conventional ceramics while offering finer microgeometry than many carbides. For finishing operations and small depths of cut, the result is a measurable improvement in surface finish and reduced need for rework, particularly when used in continuous turning where stability is high. Guaranteed fit in ISO tool systems and secure clamping As part of the ISO turning insert family, compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The triangular form offers three usable edges per insert, and the central cylindrical hole with a one-sided countersink (40°–60°) ensures reliable clamping and repeatable seating in indexable holders. Specifying the correct holder geometry and tolerance class prevents misalignment and enables fast changeovers while maintaining cutting accuracy across batches. Recommended materials and cutting strategy for best results This finishing grade is tailored to Stahl and performs best in steady, continuous cuts with small depth per pass. The 0.2 mm corner radius reduces stress concentration at the tip, promoting uniform contact and a consistent work-hardened layer on the component surface. To exploit the insert’s potential, use moderate cutting speeds and feed rates appropriate for finishing; avoid heavy interrupted cuts that would overload the fine cutting edge. The outcome is smoother component faces and reduced secondary processing. Practical selection tips: matching holder, relief and chip control Choose a holder that matches the insert’s 11° relief and size to secure the 3.18 mm thickness and the 11 mm inscribed diameter, ensuring stable cutting geometry. The W15 chipbreaker is tuned for finish turning, providing controlled chip flow without compromising edge sharpness. The insert substrate of Hartmetall contributes to rigidity and predictable wear behaviour, supporting productive turning with repeatable tolerance achievement and surface consistency. Contact Metav Werkzeuge today to discuss how the TPGT110302L-W15 NS9530 insert can improve finishing operations; Metav Werkzeuge provides technical guidance and availability details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6997977 Manufacturer SKU: TUN6997977 SKU: 6997977-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Dimensions & numeric data Corner radius: 0.2 mm Included angle: 60° Relief (free) angle: 11° Plate thickness: 3.18 mm Plate size (inscribed): 11 mm Features & mounting ISO designation: TPGT110302L-W15 Grade: NS9530 Chipbreaker: W15 Cutting material type: uncoated cermet Plate form: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) FAQ What materials is this insert best suited for? The TPGT110302L-W15 NS9530 insert is optimised for finishing Stahl; its uncoated cermet composition delivers low cutting forces and excellent surface quality in continuous turning operations. How is compatibility with a toolholder ensured? Compatibility depends on form, free angle (11°), tolerance class, clamping method, plate size and thickness; the insert’s cylindrical hole and countersink help ensure repeatable clamping in ISO-compliant holders. What cutting conditions are recommended for the NS9530 grade? Use moderate finishing speeds with small depths of cut and steady feed to exploit the NS9530 edge retention and the 0.2 mm corner radius; the grade is intended for continuous cuts rather than heavy interrupted cuts. How does the W15 chipbreaker affect performance? The W15 chipbreaker is designed for finishing applications, promoting controlled chip flow without compromising the fine cutting edge, which supports consistent surface results and easier chip evacuation. Is the insert suitable for internal turning as well as external turning? Yes; the triangular ISO insert geometry and reliable clamping make the TPGT110302L-W15 suitable for both external and internal finishing tasks when matched with the correct holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com