TPGT 080202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of the NS9530 uncoated cermet grade for superior surface quality, the defined 0.2 mm corner radius for consistent finishes, and ISO compatibility for straightforward toolholder integration; order through Metav Werkzeuge or consult the team for application advice. TPGT 080202 NS9530 turning insert (TPGT080202L‑W08) by Tungaloy — triangular 60° form, 11° clearance A TPGT080202L‑W08 NS9530 indexable turning insert engineered for precision finishing in continuous turning operations on steel and similar materials Fine finishing grade NS9530 Sharp cutting edge for low forces ISO TPGT080202 form, triangular 60° Compatible with cylindrical hole clamping Optimised finishing with a low‑force cutting geometry The insert delivers predictable results thanks to the NS9530 uncoated cermet grade combined with a sharp cutting edge, which reduces cutting resistance and supports stable chip flow. For finishing passes, the 0.2 mm corner radius produces a consistent surface quality while keeping cutting forces low; this is beneficial on long workpieces where vibration and deflection must be controlled. The formulation is intended for continuous cuts and small depths of cut, enabling repeatable, economical finishing rather than heavy roughing. Predictable mounting and ISO conformity for easy integration Compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; the TPGT080202 ISO designation ensures straightforward match with ISO‑specified toolholders and boring bars. The triangular 60° included angle and the cylindrical hole with single‑side countersink (40°–60°) provide secure clamping and repeatable indexing when replacing inserts, reducing downtime in serial production. Where tool stability is adequate, this insert supports quick changeovers and consistent part tolerances. Process efficiency and targeted application scope By pairing the W08 chipbreaker with the uncoated cermet grade, the geometry focuses on achieving high surface finish with low built‑up edge tendency on steel. The combination translates into shorter polishing times and less rework, improving overall process economics. For operations with constrained material removal per pass, the insert offers a favourable cost‑benefit through longer effective cutting periods in finishing tasks, while still allowing straightforward selection of an alternative grade or chipbreaker when conditions demand it. For precision finishing with the TPGT 080202 NS9530 turning insert from Tungaloy, contact Metav Werkzeuge for tailored application advice and to place an order by email at info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6997967 SKU: 6997967-Tungaloy Manufacturer SKU: TUN6997967 Model series: ISO turning indexable inserts ISO designation: TPGT080202L-W08 Facts Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Size: 08 ISO code: 080202 Special features Grade: NS9530 (uncoated cermet) Chipbreaker: W08 Plate form: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) Substrate material: Hartmetall FAQ Is this insert suitable for finishing steel? Yes. The TPGT080202L‑W08 NS9530 insert uses an uncoated cermet grade optimised for finishing steel with low cutting forces and excellent surface quality in continuous cuts. Which clamping systems are compatible with this insert? Compatibility follows the ISO designation: holders and boring bars designed for TPGT080202 inserts with a cylindrical hole and single‑side countersink will accept the plate reliably when form, size and thickness match. Can the insert be used for internal turning as well as external? Yes. The geometry and chipbreaker W08 make the insert suitable for both external and internal turning, provided the toolholder and setup ensure sufficient rigidity. What edge preparation and radius does the insert provide? The insert has a 0.2 mm corner radius and a sharp edge profile for low cutting forces and improved surface finish during finishing passes. What are the article and manufacturer SKUs for ordering? The article number is 6997967 and the SKU is 6997967‑Tungaloy; the manufacturer SKU is TUN6997967 for reference when specifying the Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated carbide grade (TH10), a W08 chipbreaker and ISO compatibility to achieve low cutting forces and consistently clean surfaces in turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPGT 080202 TH10 triangular turning insert (60°) by Tungaloy The TPGT 080202 TH10 is an ISO-standard triangular turning insert for external and internal turning, designed for low cutting forces and clean surface finishes on non-ferrous materials. ISO-standard triangular insert Uncoated carbide TH10 universal grade 60° nose with 0.2 mm radius For non-ferrous materials, low cutting forces Consistent low cutting forces and improved surface quality The insert is manufactured from carbide in the TH10 grade and is deliberately uncoated to preserve a sharp cutting edge; this results in low cutting forces and helps deliver a clean surface on non-ferrous workpieces. The combination of a fine 0.2 mm radius and the sharp universal grade reduces burr formation and minimises the need for secondary finishing, which improves throughput and lowers production cost per part. For operations where gentle cutting and precise surface quality matter, this cutting geometry offers a practical and verifiable advantage. Fast integration into ISO tooling systems and clear compatibility criteria Compatibility with toolholders is governed by the insert’s shape, relief angle, tolerance class, fastening, size and thickness; the ISO design makes selection straightforward. The insert is a 60° triangular form with 2.38 mm thickness and a cylindrical hole with a single-sided countersink (40°–60°), so it fits holders designed for ISO triangular inserts size 08. When replacing or specifying tooling, matching these parameters ensures correct clamping, consistent chip control and repeatable axial and radial positioning. The clear ISO references simplify procurement and reduce setup time on the shop floor. Stable chip formation and shop-floor productivity The integrated W08 chipbreaker is optimised for short, controllable chips in turning processes, supporting stable chip formation and reliable evacuation. That stability reduces interruptions from chip entanglement and contributes to longer uninterrupted cutting cycles. As an indexable insert for turning, it supports both external and internal turning tasks with predictable wear behaviour; the use of an uncoated TH10 grade is especially beneficial where low tangential cutting forces and clean contact surfaces are required. This combination promotes efficient production and helps maintain consistent part quality across batches. Contact Metav Werkzeuge for tailored advice on fitment and application of this Tungaloy TH10 insert or to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808879 Manufacturer SKU: TUN6808879 Model series: ISO turning indexable inserts Designation: TPGT080202L-W08 Material: carbide Grade: TH10 Core numerical data Thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 11° Insert included angle: 60° Insert size: 08 Design and features Shape: triangular Chipbreaker: W08 Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Compatibility: ISO-standard insert — holder selection by form, relief angle, tolerance, fastening, size and thickness FAQ Is this insert suitable for non-ferrous materials? The TPGT 080202 TH10 insert is designed as a sharp, uncoated TH10 grade, making it well suited to non-ferrous materials where low cutting forces and clean surfaces are required. How is the insert fixed in the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for standard ISO clamping systems; compatibility depends on matching the insert form, relief angle, tolerance and thickness. What does the W08 chipbreaker deliver in practice? The W08 chipbreaker promotes short, controllable chips and stable chip formation, which reduces machine stoppages and improves uninterrupted productivity during turning operations. Can this insert be used for both external and internal turning? Yes, the triangular geometry and standard ISO dimensions make this insert suitable for both external and internal turning when paired with the correct holder. What are the key dimensional values to check when specifying a holder? Key values are insert size 08, thickness 2.38 mm, relief angle 11°, 60° included angle and the 0.2 mm nose radius; these ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080202 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of sharp UX30 grade, ISO‑compatibility and a precise 0.2 mm corner radius for stable, low‑force turning and consistent chip control; order directly via Metav Werkzeuge or consult our advisers for application support. TPGT 080202 UX30 Tungaloy turning insert — triangular ISO turning insert, 60° The TPGT080202L-W08 UX30 is an ISO‑standard triangular indexable turning insert designed for external and internal turning where low cutting forces and controlled chip formation are required. ISO-standard triangular insert size 08 Sharp-edge UX30 carbide for low cutting forces W08 chipbreaker for controlled chip formation Cylindrical hole with single-side countersink Precision and productivity for machining operations The ISO‑standard geometry ensures predictable seating and repeatable results when mounted in compatible holders. Made from uncoated cemented carbide in the UX30 grade, the insert provides a sharp cutting edge that reduces cutting forces, which helps to lower machine load and extend stable cycle times. The moderate included angle of 60° and the 11° clearance angle give a balance between strength and accessibility, resulting in reliable performance on a range of shaft and bore turning tasks. In practice, this means fewer tool changes and a more continuous production flow for turning operations. Controlled chip formation and edge security Featuring the W08 chipbreaker, this insert promotes manageable chips and consistent evacuation during turning; the chipformer is optimised for common turning feeds and depths. The 0.2 mm corner radius supports accurate dimensional results while reducing cutting shock on the insert nose. For applications that prioritise surface finish and short‑chip behaviour, the combination of the chipbreaker design and the sharp UX30 grade delivers improved chip control and fewer interruptions, which contributes to higher first‑pass yields in batch and single‑piece production. Compatibility, clamping and assembly benefits The ISO designation and standardised dimensions simplify selection of holders and adaptors: compatibility is determined by insert shape, clearance angle, tolerance class, fixing method, size and thickness. The insert is supplied with a cylindrical hole with single‑side countersink (40°–60°) to match common clamping systems and ensure secure locating and clamping torque transfer. The 2.38 mm thickness provides adequate mechanical support for cutting forces typical of finishing and light roughing operations, while the standard triangular form allows three indexed cutting edges to be used in sequence for cost‑effective tool life. Practical guidance for material and application selection The uncoated UX30 carbide grade is particularly suitable where low cutting forces and good chip formation are the priority; it performs well across a broad range of steels and common alloy types in turning tasks. For heavier interrupted cuts or highly abrasive materials, selecting a different grade or a coated variant may be advisable, whereas for tight tolerances and fine surface quality the current configuration delivers consistent results. When pairing with holders, ensure the seating face and screw torque match the insert’s geometry to maintain repeatability and minimise runout. For reliable, production‑ready turning performance with genuine Tungaloy inserts, order the Tungaloy UX30 indexable inserts from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical Data Article number: 6808880 Manufacturer SKU: TUN6808880 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPGT080202L-W08 UX30 Tungaloy insert Application: Turning Facts Included angle: 60° Clearance angle: 11° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 08 ISO code: 080202 Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Grade: UX30 Material: uncoated cemented carbide Chipbreaker: W08 Shape: triangular Compatible with ISO‑standard turning holders Suitable for external and internal turning Three usable cutting edges per indexable insert FAQ What materials is this insert suitable for? The TPGT080202L-W08 UX30 Tungaloy insert, made from uncoated cemented carbide in UX30 grade, is designed for a broad range of steel turning tasks where low cutting forces and controlled chip formation are desired. How does the W08 chipbreaker affect machining? The W08 chipbreaker on this Tungaloy turning insert promotes stable chip formation and easier evacuation, which reduces interruptions and supports consistent surface quality in typical turning feeds. Can the insert be used in standard ISO holders? Yes; the insert follows ISO geometry and the ISO‑standard dimensions allow it to be mounted in compatible holders that accept triangular size 08 inserts, provided form, clearance angle and clamping method match. What does the 0.2 mm radius mean for finish and strength? A 0.2 mm corner radius offers a compromise between improved surface finish and edge strength; it reduces cutting shock compared with a sharp point while maintaining good dimensional control on turned features. Is the insert coated, and when is a coated grade preferable? This insert is supplied as uncoated cemented carbide (UX30). For increased wear resistance or higher cutting speeds on abrasive alloys, a coated grade would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080204 GH110 W08 Wendeplatten - Tungaloy
A durable combination of wear resistance and edge stability paired with ISO interchangeability ensures reliable cycle times and consistent surface quality. The GH110 carbide grade and the precise 0.4 mm nose radius support repeatable finishing and predictable tool life. Order the TPGT080204L-W08 GH110 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 080204 GH110 indexable turning insert for Turning — 60° triangular, 0.4 mm radius (Tungaloy) TPGT080204L-W08 GH110 is an ISO‑standard indexable insert engineered for precision external and internal turning, offering a balanced carbide grade and a chipbreaker optimised for general turning tasks. ISO‑standard triangular insert, 60° geometry GH110 Tungaloy carbide grade for balanced wear 0.4 mm nose radius for precision finishing Cylindrical hole with single‑side countersink Engineered for consistent productivity and predictable tool life The insert is manufactured in a carbide grade designed to balance wear resistance and toughness, which means longer tool life under mixed cutting conditions. The GH110 grade from Tungaloy provides a compromise between edge stability and abrasion resistance, so material removal rates can be maintained without frequent edge changes. Thanks to the ISO‑standard form, seating and clamping forces can be relied upon, reducing variation in component finish and making process planning more predictable. Holder compatibility and straightforward assembly reduce downtime Compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness, so an appropriate holder and clamping set must be selected. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) which enables secure fastening and consistent seating in most standard external holders and boring bars. Using correctly matched holders and replacement screws ensures minimal set‑up time and fast index changes, improving uptime and simplifying inventory management for production workshops. Application range and machining benefits explained Designed for both external and internal turning, the triangular 60° geometry with a 0.4 mm nose radius supports finishing passes and light profiling where a fine edge is required. The integrated chipbreaker W08 is suitable for general turning; selecting a chipbreaker and grade that match the workpiece material and machining stability will control chip form and surface integrity. For roughing, a larger nose radius or a different chipformer could be chosen, whereas this insert excels where dimensional control and surface quality are priorities. Contact Metav Werkzeuge for expert matching of the Tungaloy GH110 grade and to secure the right indexable turning insert for specific turning tasks Technical Data Article number: 6808881 Manufacturer SKU: TUN6808881 Model series: ISO‑Drehwendeschneidplatten SKU: 6808881‑Tungaloy Designation: TPGT080204L‑W08 GH110 Tungaloy insert Numerical data Nose radius: 0.4 mm Included angle: 60° Relief (rake) angle: 11° Thickness: 2.38 mm Size: 08 Special features Carbide grade: GH110 (Tungaloy) Chipbreaker: W08 Plate form: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Intended use: turning (external and internal) System composition: ISO insert, compatible holder or boring bar, clamping set and spare screws FAQ What materials is this insert suited for? The GH110 grade insert is formulated for a broad range of materials; the TPGT080204L‑W08 insert performs best where a balance of wear resistance and toughness is required for turning operations. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius provides a fine compromise between stiffness and finish quality; it supports improved surface integrity on finishing passes compared with smaller radii while keeping cutting forces moderate. Which chipbreaker is fitted and what is its purpose? This insert features the W08 chipbreaker, designed to control chip form during general turning and to support consistent surface finishes under stable cutting conditions. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for reliable fastening; correct holder selection and proper clamping torque ensure repeatable seating and secure operation. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 080204 GT9530 Wendeplatten - Tungaloy
Taking advantage of a coated cermet grade designed for finishing and light universal turning, this insert combines excellent surface finish and extended tool life under stable cutting conditions; order through Metav Werkzeuge or contact our consultants for application advice. TPGT 080204 GT9530 Tungaloy turning insert — coated cermet, 11° clearance The TPGT080204L-W08 GT9530 is an ISO triangular turning insert for turning operations, optimised for finishing and light general turning of steel with a wear-resistant cermet coating. TPGT ISO triangular insert 080204 Coated cermet grade GT9530 for steel 11° clearance and 0.4 mm corner radius ISO compatible with cylindrical hole and countersink Improved surface quality and longer tool life for finishing operations The coated cermet composition of this insert promotes a superior surface finish while maintaining wear resistance during steady cutting. The GT9530 grade combines a ceramic-rich cutting edge with a metal binder to resist flank wear and generate a fine machined surface on steel components. For precision-oriented production, this means fewer passes and reduced finishing stages while preserving dimensional stability and repeatability. Predictable mounting and compatibility with ISO toolholders As an ISO-standard triangular insert, compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert features an included angle of 60°, a 0.4 mm corner radius, an 11° clearance, and a plate thickness of 2.38 mm, together ensuring consistent seating in suitable indexable toolholders. The centre cylindrical hole with one-sided countersink (40°–60°) allows secure clamping and straightforward replacement, supporting tight process control in turning centres. Process stability and practical benefits in production Selecting the W08 chipbreaker with this coated cermet grade supports stable chip formation during finishing cuts, reducing the risk of built-up edge and rework. The carbide substrate provides the necessary toughness for interrupted cuts, while the coating enhances resistance to adhesive wear. For shops focused on productivity and consistent quality, this insert delivers predictable tool life and surface characteristics under stable cutting conditions. For reliable finishing performance with Tungaloy inserts, consult Metav Werkzeuge for process-matching advice or to request availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997880 Manufacturer SKU: TUN6997880 SKU: 6997880-Tungaloy Model series: ISO turning indexable inserts Core specifications Included angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Thickness: 2.38 mm Size: 08 Plate form: triangular Features & applications Coated cermet grade GT9530 Chipbreaker: W08 Hole: cylindrical hole with single-sided countersink (40°–60°) Material: cemented carbide Typical application: external and internal turning; finishing to light universal turning ISO-standard insert; compatibility determined by form, tolerance, fastening, size and thickness FAQ Is this insert suitable for finishing steel components? The GT9530-coated cermet insert is optimised for finishing and light universal turning of steel, providing improved surface finish and extended wear resistance under stable conditions. Can the insert be used for internal turning as well as external turning? Yes, the triangular geometry and secure clamping via the cylindrical hole and countersink make it suitable for both external and internal turning applications when the holder supports the ISO 080204 format. What does the W08 chipbreaker mean in practice? The W08 chipbreaker is designed for finishing to light cuts; combined with the GT9530 grade it encourages controlled chip formation and a consistent surface quality in stable machining conditions. How important is the 11° clearance angle for performance? The 11° clearance ensures adequate relief behind the cutting edge, reducing rubbing and promoting consistent cutting forces, which helps the coated cermet edge maintain its finish and tool life. Which toolholders are compatible with this ISO insert? Compatibility depends on the holder's form, free clearance, tolerance class, fastening method, size and thickness; holders specified for ISO triangular inserts in size 08 and the 080204 footprint are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080204 NS9530 Wendeplatten - Tungaloy
High-performance uncoated cermet grade NS9530 combines a sharp cutting edge with a small 0.4 mm corner radius and low cutting forces to deliver excellent surface finish in finishing turns; the ISO triangular form with secure central hole and 11° relief ensures repeatable clamping in common holders. Order the TPGT080204L-W08 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 080204 NS9530 Tungaloy Turning Insert — ISO triangular finishing insert for steel A TPGT080204L-W08 NS9530 indexable turning insert engineered for finishing operations on steel, offering a sharp edge and a chipbreaker tuned for continuous cuts and small depths of cut. Uncoated cermet grade NS9530 Sharp edge for superior surface finish Triangular ISO shape, 60° included angle Central hole with countersink for secure clamping Superior surface quality for finishing passes The combination of uncoated cermet construction and the NS9530 grade produces a notably sharp cutting edge, which lowers cutting forces and promotes a high-quality surface finish on steel. The small corner radius (0.4 mm) concentrates the cut for narrow, precise passes, making the insert particularly effective for continuous turning with small depths of cut. For operations where fine surface integrity and minimal post-processing are priorities, this geometry and grade reduce the need for secondary finishing while maintaining steady performance. Secure fit and repeatable clamping for productivity Designed to the ISO indexable plate standards, the insert’s triangular form with a 60° included angle and a central hole with a cylindrical bore plus one-sided countersink (40°–60°) provides dependable seating in compatible external holders or boring bars. The 11° relief angle and 2.38 mm plate thickness ensure consistent engagement and support under cutting loads, while the standard size designation (08) aids in holder selection. These dimensional features translate into reliable repeatability and easier tool-change procedures on production equipment. Practical system integration and application advice This insert is intended as part of a complete turning system: ISO indexable plate, matching external holder or boring bar, underlay/clamping set and replacement screws for secure assembly. The W08 chipbreaker is optimised for finishing cuts, supporting stable chip control during steady, continuous machining of steel. As an uncoated cermet, the grade performs best where sharp edges and low cutting forces are required rather than high-temperature resistance; it is therefore recommended for finishing steel components with fine tolerances rather than heavy interrupted cuts. For application guidance or to secure compatible holders and clamping sets from Metav Werkzeuge, contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 — we can advise on the best setup for this Tungaloy finishing insert Technical data Article number: 6997968 Manufacturer SKU: TUN6997968 SKU: 6997968-Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 11° Included angle: 60° Size: 08 Special features Grade: NS9530 (uncoated cermet) Chipbreaker: W08 (finishing) Plate form: triangular (ISO TPGT) Hole: cylindrical hole with one-sided countersink (40°–60°) Material base: carbide Application: turning (finishing on steel) ISO designation: TPGT080204L-W08 FAQ What materials is this insert optimised for? The TPGT080204L-W08 NS9530 insert is optimised for finishing operations on steel; the uncoated NS9530 cermet grade favours low cutting forces and high surface quality. Can this insert be used for interrupted cuts? This finishing grade and its chipbreaker W08 are intended for continuous cuts and small depths of cut; for heavy or interrupted machining a more robust grade or geometry is recommended. How is compatibility with holders determined? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO triangular form and the central hole/countersink allow secure mounting in matching external holders or boring bars. Is the insert coated? No, the NS9530 designation indicates an uncoated cermet plate, selected for its sharp edge and fine finishing capability rather than thermal resistance from coatings. What is the purpose of the W08 chipbreaker? The W08 chipbreaker is tuned for finishing: it promotes stable chip flow during steady, small-depth passes and helps maintain surface integrity on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080204 TH10 Wendeplatten - Tungaloy
Take advantage of a combination of precise geometry and a sharp, uncoated carbide grade for efficient turning operations; the triangular 60° form with a 0.4 mm corner radius and W08 chipbreaker delivers low cutting forces and clean surfaces in non‑ferrous work. Order the insert directly via Metav Werkzeuge or consult the technical advisors for matching holders and clamping accessories. TPGT 080204 TH10 indexable turning insert — ISO triangular insert for turning (Tungaloy) The TPGT080204L-W08 TH10 is an ISO‑standard indexable turning insert designed for external and internal turning, combining an uncoated carbide grade with a dedicated chipbreaker for machining non‑ferrous materials. ISO triangular insert for turning Uncoated carbide TH10 grade Chipbreaker W08 for stable chips Cylindrical hole with 40°–60° countersink Precision where low cutting forces and surface quality matter The insert is made from uncoated carbide, a choice that reduces friction and helps maintain a sharp cutting edge when machining non‑ferrous materials. The TH10 grade is developed as a sharp universal grade, which supports lower cutting forces and contributes to a clean surface finish. For shops seeking reliable dimensional results with less burr formation, the combination of a sharp grade and controlled geometry reduces rework and improves downstream processes. Controlled chip formation for consistent productivity Equipped with the W08 chipbreaker, the geometry channels material flow to create short, controllable chips during turning. That design reduces the risk of long, entangling chips and assists coolant access at the cutting zone. The result is a safer machining environment and more consistent cycle times; the insert’s chip control is particularly advantageous in automated or high‑volume turning where chip evacuation is essential for uninterrupted production. Secure fit and defined clamping parameters Compatibility with toolholders is determined by form, 11° clearance angle, tolerance class, fastening type, size and 2.38 mm thickness. The triangular 60° form and the central cylindrical hole with one‑sided countersink (40°–60°) ensure repeatable seating and secure clamping when used with the correct holder and clamping kit. Specifying holders that match these parameters guarantees stable cutting conditions and predictable tool life. Application guidance and selection advice Best suited for machining non‑ferrous materials, the insert performs well in both external and internal turning where a sharp, uncoated edge is beneficial. The 0.4 mm corner radius balances edge strength and detail in profile work; smaller radii improve corner definition while larger radii extend edge life in heavy cuts. For questions on matching the insert to a particular holder style or material, Metav Werkzeuge can supply compatibility charts and practical recommendations to ensure optimal process results. For technical availability and application advice on the Tungaloy TH10 insert, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808884-Tungaloy Manufacturer article number: 6808884 Manufacturer SKU: TUN6808884 Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Included angle: 60° Plate size: 08 Special features Material: uncoated carbide Grade: TH10 Chipbreaker: W08 Plate form: triangular Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) ISO designation: TPGT080204L‑W08 Typical application: external and internal turning FAQ What materials is this insert best suited for? The TPGT080204L‑W08 TH10 insert is optimised for non‑ferrous materials; the uncoated carbide grade supports low cutting forces and cleaner surface finishes when machining brass, aluminium and similar alloys. How does the W08 chipbreaker affect machining? The W08 chipbreaker on this triangular indexable insert promotes short, controllable chips, improving evacuation and reducing interruptions—particularly useful in automated turning centres. Which holder features must match the insert? Holder compatibility depends on form, 11° clearance angle, tolerance class, fastening method, size and 2.38 mm thickness; matching these parameters ensures correct seating and reliable clamping. What does the ISO code 080204 indicate? The ISO code 080204 describes the insert geometry and size class used for standardisation; it helps to select matching holders and to ensure interchangeability across ISO‑compliant systems. Can this insert be used for finishing and roughing? The sharp TH10 grade excels in finishing and less aggressive turning of non‑ferrous parts; for heavy roughing, consider grades and geometries specifically designed for higher wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 080204 UX30 W08 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, consistent chip control and easy mounting for efficient turning operations; order the TPGT080204L-W08 UX30 insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 080204 UX30 Tungaloy turning insert – sharp-edge uncoated carbide, W08 chipbreaker TPGT080204L-W08 UX30 Tungaloy turning insert designed for general external and internal turning, offering low cutting forces and reliable chip formation for stable machining. Sharp cutting edge for low cutting forces Uncoated cemented carbide grade UX30 Triangular 60° geometry for turning operations Cylindrical hole with single-sided countersink Increase throughput with a sharp-edge geometry The TPGT080204L-W08 is engineered with a sharp cutting edge and a compact 0.4 mm corner radius, reducing cutting forces and enabling smoother material engagement. This geometry suits light to medium interrupted cuts and applications where minimising cutting load is critical. The result is improved productivity through higher feed rates or reduced machine strain, while the sharp edge supports predictable chip formation and easier control of the cutting process. Secure mounting and predictable repeatability Compatibility with ISO-standard toolholders is defined by form, clearance, tolerance class, fastening and thickness; the triangular 60° format ensures a stable seating and indexable use. The insert is supplied with a cylindrical locating hole and a single-sided countersink (40°–60°) that aligns with common clamping systems, simplifying replacement and preserving positional repeatability. Clear mechanical interfaces reduce setup time and support consistent component tolerances over batch runs. Material suitability and chip control for consistent surface quality Manufactured from cemented carbide (uncoated, UX30) and paired with the W08 chipbreaker, this insert balances low cutting resistance with effective chip segmentation. The combination is particularly suitable when good chip control and surface finish are priorities rather than extreme economies on cutting speeds. In practice, the insert performs well across a broad range of steels and non-ferrous materials where controlled, short chips are beneficial for tool life and machine cleanliness. Practical application advice and process benefits Select the UX30 grade when operations require a keen cutting edge and reliable chip formation, especially for finishing or semi-finishing passes. The insert’s 11° clearance angle supports stable cutting geometry and reduces rubbing on the flank face, prolonging usable edge life. When integrated into a matched holder and clamping kit, the system yields repeatable results and predictable tool-change intervals, contributing directly to process stability and reduced scrap rates. For dependable, sharp-edge turning performance with Tungaloy UX30 technology, contact Metav Werkzeuge for availability and technical guidance; Metav Werkzeuge will advise on holder compatibility and optimal process settings. Technical Data Article number: 6808885 SKU: 6808885-Tungaloy Manufacturer SKU: TUN6808885 Model series: ISO-Drehwendeschneidplatten ISO designation: TPGT080204L-W08 Core specifications Corner radius: 0.4 mm Plate thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Size: 08 Design & features Material: cemented carbide (uncoated), grade UX30 Chipbreaker: W08 Plate shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The TPGT080204L-W08 UX30 insert is suitable for a broad range of steels and selected non-ferrous materials where a sharp edge and good chip formation are required. How does the UX30 grade influence cutting performance? The UX30 uncoated cemented carbide grade provides a sharp cutting edge that reduces cutting forces and improves chip control, making it appropriate for finishing and light to medium turning operations. Which chipbreaker is fitted and what is its effect? This insert features the W08 chipbreaker, designed to produce short, controllable chips and to support consistent surface finish during turning. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions and uses a cylindrical locating hole with a single-sided countersink, ensuring compatibility with many ISO-standard external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 GT9530 Wendeplatten - Tungaloy
Combine the wear‑resistant GT9530 cermet grade, ISO‑conforming triangular geometry and a fine 0.2 mm corner radius to achieve superior surface finish and extended tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPGT090202 GT9530 Tungaloy turning insert (ISO triangular, 60°) The TPGT090202 GT9530 is a coated cermet turning insert designed for precision external and internal turning, offering stable finishing performance in steel under steady machining conditions. Wear‑resistant GT9530 cermet grade ISO 090202 triangular geometry 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent finishing and longer service intervals The GT9530 grade is a coated cermet engineered for wear resistance during finishing and light universal turning of steel. Its chemistry and coating combination reduce flank wear and promote a consistent cutting edge, which in turn extends tool life and reduces the frequency of insert changes. For operations where surface quality matters, the material pairing minimises microchipping and maintains dimensional stability, leading to fewer reworks and a more predictable production rhythm. Geometry that supports process reliability The insert's ISO‑standard triangular form with a 60° included angle, a 0.2 mm corner radius and an 11° clearance angle provides a controlled cutting geometry that balances strength and finish capability. The plate thickness of 2.38 mm contributes to rigidity in light to moderate turning tasks, while the central cylindrical hole with a single‑sided countersink (40°–60°) ensures secure clamping and repeatable seating in compatible holders. Compatibility is determined by the holder form, clearance angle, tolerance class, fastening method, size and thickness, so matching the insert to a suitable external holder or boring bar is essential for optimum performance. Practical integration for workshop productivity In a typical system setup the ISO insert is paired with a matching external holder or boring bar, a supporting shim/clamping set and replacement screws; this arrangement simplifies replacement and maintains alignment. The single‑sided chipbreaker is selected to match the workpiece material and stability of the setup, improving chip control and reducing the risk of built‑up edge on the workpiece. Overall, the combination of surface finish, reliable chip formation and the GT9530's wear properties delivers a competitive balance of productivity and repeatable quality in series production and precision jobs. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts, quoting SKU 6997872‑Tungaloy, or request a quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6997872 Manufacturer SKU: TUN6997872 Seller SKU: 6997872-Tungaloy ISO designation: TPGT090202 Dimensions & Angles Size: 09 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Material & Features Coated cermet grade GT9530 Shape: triangular Hole: cylindrical hole with single‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning System composition: ISO insert, matching holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The GT9530 grade is optimised for steel machining, providing good surface finish and extended life in stable turning operations. How does the 0.2 mm corner radius affect the result? A 0.2 mm radius supports finer surface finishes while keeping sufficient edge strength for light finishing and light turning passes. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation TPGT090202 and the insert's clamping hole ensure repeatable seating in standard ISO triangular external holders. Can this insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning when paired with the appropriate external holder or boring bar and when cutting parameters match the workpiece and setup stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 GT9530 Wendeplatten - Tungaloy
The combination of a GT9530 coated cermet grade and ISO‑compliant geometry delivers improved surface finish and extended tool life under stable turning conditions; select the matching chipbreaker for reliable chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPGT 090202 GT9530 Tungaloy turning insert — coated cermet, 0.2 mm radius The TPGT090202 GT9530 is a triangular, ISO‑standard indexable insert designed for finishing and light general turning on steel, offering enhanced wear resistance and consistent surface quality. Coated cermet grade GT9530 for finishing Triangular ISO form with 60° included angle 0.2 mm corner radius for fine detail 11° clearance angle for stable engagement Improve surface quality while extending tool life The coated cermet composition of this insert places emphasis on surface finish and wear resistance; the GT9530 grade is formulated for finishing to light universal turning in steel where stable conditions permit longer tool life. Compared with conventional carbide grades, a cermet coating reduces built‑up edge and promotes a consistently smooth workpiece appearance, which lowers rework rates and supports predictable cycle times. Focus on steady feeds and speeds to exploit the grade’s strengths and achieve the intended productivity gains. Reliable seating and machine compatibility for uninterrupted production An ISO‑conforming geometry simplifies holder selection: the triangular form with a 60° included angle, size 09, and 2.38 mm thickness are standard measures that determine fit. The insert is supplied with a cylindrical hole and single‑sided countersink (40°–60°) to suit common clamping systems; compatibility is governed by form, clearance angle 11°, tolerance class, clamping method, size and thickness. These design features support secure seating and repeatable tool positioning, reducing indexing times and ensuring consistent cutting conditions across batches. Practical guidance for application and chip control This insert is optimised for external and internal turning when paired with a matching chipbreaker and appropriate toolholder. The supplied one‑sided chipbreaker is effective when the machining strategy and workpiece stability are aligned; select a more aggressive breaker or different grade where interrupted cuts or softer materials demand alternative chip management. In practice, matching feed, speed and rigidity to the insert’s strengths reduces vibration, improves edge life and delivers the economic benefits of fewer tool changes and less scrap. Technical assistance is available from Metav Werkzeuge for parameter selection and holder compatibility. Contact Metav Werkzeuge for tailored machining advice and to secure the Tungaloy GT9530 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for precise selection and ordering support Technical Data Manufacturer item no.: 6997881 SKU: 6997881-Tungaloy Manufacturer SKU: TUN6997881 ISO designation: TPGT090202 Core technical data Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Size: 09 Special features Grade/coating: GT9530, coated cermet Material: carbide Geometry: triangular indexable insert Hole style: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: one‑sided Typical application: external and internal turning Series: ISO turning inserts Compatibility factors: form, clearance angle, tolerance class, clamping, size, thickness FAQ What materials is this insert best suited for? The GT9530 coated cermet grade is intended primarily for machining steel in finishing to light universal turning applications, offering improved surface finish and longer edge life. How does the insert attach to the holder? The triangular insert features a cylindrical hole with a single‑sided countersink (40°–60°) to accommodate common clamping systems; secure seating depends on matching the holder to the insert’s form, size and thickness. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius delivers finer detail and better surface appearance in finishing operations while maintaining sufficient robustness for light general turning. Is the insert suitable for internal turning? Yes; the TPGT090202 GT9530 indexable insert can be used for internal turning provided that the holder offers adequate support and the chosen chipbreaker matches the cut and material. Which chipbreaker should be chosen for heavy cuts? For heavy or interrupted cuts, select a more aggressive chipbreaker and consider a different grade; the supplied one‑sided chipbreaker is optimised for finishing and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision ISO triangular indexable insert with a NS9530 uncoated cermet grade and 0.2 mm corner radius to improve surface finish and reduce cutting forces in finishing operations. The insert’s ISO compatibility, cylindrical hole with single-sided countersink and 11° relief angle ensure reliable clamping and reproducible positioning in standard turning holders. Order directly via Metav Werkzeuge or consult the team for application support. TPGT090202 NS9530 triangular ISO turning insert, uncoated cermet, 0.2 mm radius — Tungaloy A TPGT090202 NS9530 ISO triangular indexable insert engineered for finishing turning of steel, optimised for continuous cuts and high surface quality NS9530 uncoated cermet finishing grade 0.2 mm corner radius for fine surface quality 11° relief angle for low cutting forces Cylindrical hole with single-sided countersink High-quality finishing with reduced cutting forces The uncoated cermet NS9530 is designed as a finishing grade for steels, offering a sharp cutting edge and low cutting forces that contribute directly to improved surface quality and dimensional stability. As a consequence of the cermet composition, friction at the cutting zone is reduced compared with some coated grades, which benefits continuous cutting operations and small depths of cut. This insert is therefore suited to applications where a fine surface and consistent repeatability are required. Reliable fit and secure clamping in ISO systems The triangular ISO shape and the cylindrical hole with a one-sided countersink (40°–60°) ensure precise seat alignment and stable clamping in compatible holders. The 11° relief angle is matched to standard turning holders, which helps lower flank contact and reduces cutting forces during finishing passes. Designers and operators will appreciate the reproducible positioning that reduces setup variation and supports steady-cycle machining. Geometry tailored for consistent surface finish With a 0.2 mm corner radius, the insert balances edge strength and the ability to produce fine finishes on external and internal turning operations. The single-sided chipbreaker geometry is optimised for continuous chips and stable chip flow when matched to the material and cut parameters. Selecting this grade and geometry leads to fewer rework cycles and a higher first-pass yield in precision components. Practical selection and process guidance For turning steels with continuous cuts and modest depths of cut, this ISO triangular insert delivers the best results when used with a suitably rigid holder and correct feed speeds for finishing. The insert forms part of a system that includes the matching outer holder or boring bar, a shim/clamp set and replacement screws; ensuring the complete assembly meets tolerance and form requirements increases process reliability and tool life. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts or to request sample assemblies and machining recommendations from Metav Werkzeuge. Technical data Article number: 6997956 Manufacturer SKU: TUN6997956 Model series: ISO-Drehwendeschneidplatten ISO designation: 090202 Plate designation: TPGT090202 Thickness: 2.38 mm Size: 09 Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade: NS9530 Cutting material type: uncoated cermet Plate shape: triangular Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Size designation: 09 Manufacturer article number: 6997956 Special features Designed for turning (external and internal) Single-sided chipbreaker for continuous cutting ISO-standard triangular insert for holder compatibility Optimised for finishing of steel with sharp cutting edge System components: insert, compatible holder/boring bar, shim/clamp and replacement screws FAQ What steels is this insert suited to? This TPGT090202 NS9530 insert is a finishing grade optimised for steels and delivers low cutting forces and high surface quality when used in continuous turning. Can the insert be used for internal turning? Yes, the triangular ISO geometry of the insert supports both external and internal turning applications when mounted in an appropriate boring bar or holder. How does the cylindrical hole with countersink improve performance? The cylindrical hole with a one-sided countersink (40°–60°) provides precise seating and secure clamping, which improves repeatability and reduces the risk of movement during finishing cuts. Is the NS9530 grade coated? No, NS9530 is specified as an uncoated cermet finishing grade, chosen for a sharp edge and reduced friction on steel finishing operations. Which chipformer is fitted to this insert? The insert is supplied with a single-sided chipbreaker, suited to stable, continuous chips typical of finishing passes in steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade cutting edge that combines low cutting forces with excellent surface quality for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPGT 090202 NS9530 Tungaloy turning indexable insert — 0.2 mm radius, 11° relief The TPGT090202 NS9530 is a triangular ISO turning insert intended for finishing steel, offering a sharp edge geometry for continuous cuts and small depths of cut. ISO triangular insert, size 09 Uncoated cermet finishing grade NS9530 11° relief angle for low cutting forces Cylindrical hole with 40°–60° countersink Achieve superior surface finish with a finishing-grade cermet The uncoated cermet composition (NS9530) is optimised as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that reduce vibration and tool chatter. For operations with continuous cutting and modest depths of cut, this material combination improves part tolerances and reduces the need for secondary finishing, which supports a more efficient production flow. The result is a consistent high surface finish and reliable dimensional accuracy on turned components. Designed to fit ISO toolholders with clear mounting parameters The insert follows ISO geometry and fits into compatible triangular holders when form, relief angle, tolerance class, fastening and plate thickness are matched. Key mounting values — 11° relief angle, 2.38 mm thickness and a cylindrical hole with one-sided countersink (40°–60°) — ensure reproducible clamping and stable seating in standard toolposts. Pay attention to the holder’s seat and screw arrangement: correct pairing avoids runout and preserves the intended cutting geometry and surface quality. Practical advantages for reliable process performance Choosing a finishing-grade insert brings measurable process benefits: reduced cutting forces lower machine load and can permit higher feed rates within finish limits, while the 0.2 mm corner radius preserves a crisp edge for fine detail on external and internal profiles. The one-sided chipbreaker supports chip control in stable setups and reduces the risk of re-cutting, which enhances cycle-time predictability and part-to-part consistency. These practical advantages translate into better throughput and fewer reworks in precision turning applications. Guidance for selecting the right chipbreaker and setup Typical applications include external and internal turning of steel where surface quality and dimensional control are priorities. Select the chipbreaker and grade that match the workpiece material, machining type and setup stability: the NS9530 grade is tailored for finish passes and small depth-of-cut conditions. Ensure the toolholder and clamping kit (underlay/clamp and replacement screws) correspond to the insert’s ISO designation and hole style to guarantee secure mounting and repeatable performance. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts and to confirm compatibility with existing holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997970 SKU: 6997970-Tungaloy Manufacturer SKU: TUN6997970 Model series: ISO turning indexable inserts Label: TPGT090202 NS9530 Tungaloy indexable insert Core specifications Insert designation: TPGT090202 Corner radius: 0.2 mm Included angle: 60° Relief angle: 11° Thickness: 2.38 mm Size: 09 Special features Uncoated cermet cutting material (NS9530) One-sided chipbreaker Triangular insert, with hole Cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ Which materials is this insert intended for? The NS9530 finishing grade is intended primarily for steel; the TPGT090202 NS9530 Tungaloy indexable insert performs best on continuous cuts and small depths of cut when a high surface finish is required. Can the insert be used for internal turning as well as external turning? Yes — the insert is suitable for both external and internal turning operations when mounted in an appropriate ISO-compatible holder and used with stable machining parameters. What are the key dimensions to check when selecting a holder? Check the insert designation (TPGT090202), 11° relief angle, 2.38 mm thickness, size 09, and the hole style (cylindrical hole with one-sided countersink) to ensure the holder seat and fastening match. Is the cutting material coated? The cutting material is an uncoated cermet (NS9530), selected to provide a sharp edge and superior surface quality in finishing applications. How does the 0.2 mm corner radius influence results? A 0.2 mm corner radius maintains a fine edge that enhances surface finish and detail definition while distributing cutting forces in finish passes; it is well suited to tight-tolerance turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 NS9530 Wendeplatten - Tungaloy
Combining the uncoated cermet NS9530 finishing grade with a sharp cutting edge and a compact 0.2 mm corner radius delivers consistently high surface quality and low cutting forces for finishing operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPGT 090202 NS9530 Tungaloy — ISO triangular turning insert for finishing, 0.2 mm radius TPGT090202 NS9530 Tungaloy is an ISO-standard triangular turning insert designed for precision finishing of steel with a sharp edge geometry and single-sided chip control ISO triangular insert TPGT 090202 Uncoated cermet NS9530 finishing grade Sharp cutting edge for superior surface finish Single-sided chipbreaker, cylindrical hole and countersink High-quality finishing with low cutting forces The combination of NS9530 as an uncoated cermet and a finely honed edge geometry supports continuous finishing cuts on steel, reducing cutting forces and improving surface integrity. This specification is aimed at operations where small depths of cut and consistent part finish matter; the material choice provides excellent edge stability for predictable results. The design is particularly suited to applications requiring a fine machined surface rather than heavy stock removal, translating into lower rework rates and improved process efficiency. Easy integration into ISO tool systems for reliable process setup Compatibility with existing toolholders is governed by form, relief angle, tolerance class, fastening method, size and thickness. The insert's 11° relief, 60° included angle and standard ISO form mean the plate fits widely used triangular holders; the cylindrical hole with one-sided countersink ensures secure clamping and repeatable positioning. Because mounting geometry and tolerance classes determine interchangeability, this insert integrates smoothly into established turning programmes, reducing setup time and increasing uptime. Predictable chip control and consistent surface quality A single-sided chipbreaker tailored for finishing promotes controlled chip formation during continuous cuts, lowering the risk of built-up edge and enabling stable cutting conditions. The compact 0.2 mm corner radius balances edge strength with the ability to achieve fine surface finishes on turned components. For best results, match the chipbreaker and grade to the workpiece material and the machine–tooling stability; selecting the correct combination improves economy by extending tool life and stabilising part quality. For precision finishing in turning operations, request the Tungaloy TPGT 090202 NS9530 insert via Metav Werkzeuge — our specialists will advise on toolholder compatibility and optimal use for specific steel machining tasks; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6997969-Tungaloy Manufacturer article number: 6997969 Manufacturer SKU: TUN6997969 Model series: ISO turning inserts Core specifications Size: 09 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Special features Material: carbide Grade: NS9530 (uncoated cermet) Shape: triangular Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Typical use: finishing on steel FAQ What materials is this insert intended for? The TPGT090202 NS9530 insert is specified as a finishing grade for steel; the NS9530 uncoated cermet excels in continuous finishing cuts and produces a high surface quality. How is holder compatibility determined for this insert? Compatibility depends on form, relief angle (11°), tolerance class, fastening type, size (09) and thickness (2.38 mm); matching these parameters ensures correct fit and repeatable clamping. Which chipbreaker should be selected for light finishing cuts? For light, continuous finishing it is recommended to use the supplied single-sided chipbreaker together with the NS9530 grade to promote stable chips and minimise built-up edge. Can this insert be used for internal as well as external turning? Yes — the ISO triangular form and clamping hole allow the insert to be used in suitable external and internal turning toolholders, provided the holder accepts size 09 triangular plates. What features help achieve the high surface finish promised? The combination of an uncoated cermet grade (NS9530), a sharp cutting edge geometry and a small 0.2 mm corner radius delivers low cutting forces and superior surface quality in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a sharp uncoated carbide grade for low cutting forces, and a compact 0.2 mm corner radius for precise finishing in turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. TPGT090202 TH10 Tungaloy — ISO triangular turning insert, uncoated carbide, 0.2 mm radius TPGT090202 TH10 Tungaloy is a triangular, ISO-standard turning insert engineered for external and internal turning, offering a sharp, universal uncoated grade for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes. ISO-standard triangular insert Uncoated carbide TH10 grade 0.2 mm corner radius for fine finishing Single-sided chipbreaker with centre hole Precision and compatibility that ensures reliable mounting and repeatable results The ISO-standard geometry simplifies tool selection and integration into existing toolholders: the triangular form, size designation 09 and the cylindrical hole with one-sided countersink (40°–60°) ensure consistent clamping and repeatability. Compatibility is determined by form, relief angle (11°), tolerance class, fastening and plate thickness so the insert fits standard holders for turning. This predictable interface reduces setup time and supports stable production runs. Low cutting forces and clean surface quality for non‑ferrous turning The uncoated TH10 grade is a sharp, universal carbide designed to keep cutting forces low, which helps to minimise workpiece distortion and to produce a refined surface directly from the cut. The small 0.2 mm corner radius aids in achieving fine edge definition on profiles and finishes, especially on softer materials. Where minimal burr and pristine surface are priorities, this insert provides an economically efficient option without the need for additional finishing passes. Operational benefits, chip control and recommended applications A single-sided chipbreaker manages chip formation on common turning tasks and is particularly suitable for machining non‑ferrous materials and cases where an uncoated cutting edge is advantageous. The plate thickness of 2.38 mm and the insert’s geometry balance edge strength with accessibility in tighter tool setups. Typical use cases include medium to light turning, semi-finish operations and applications where lower cutting resistance and surface quality are required rather than heavy interrupted cuts. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy turning inserts and to arrange prompt supply or technical consultation Technical Data Article number: 6808891 SKU: 6808891-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall WPL designation: TPGT090202 Manufacturer article number: TUN6808891 Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Plate thickness: 2.38 mm Size: 09 Special features Uncoated carbide grade TH10 Triangular plate, one-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) For external and internal turning applications Designed for low cutting forces and clean surfaces FAQ What materials is this insert best suited for? The TPGT090202 TH10 Tungaloy insert is optimised for non‑ferrous materials and applications where an uncoated carbide cutting edge supports low cutting forces and a clean finish. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius reduces edge pressure and produces finer surface finishes on the workpiece; the radius on the TPGT090202 contributes to controlled cutting action and improved profile detail. Is the insert compatible with standard ISO toolholders? Yes — the insert follows ISO-standard dimensions and features, so compatibility depends on matching holder form, relief angle, tolerance class, fastening and plate thickness as outlined in the product data. What is the purpose of the single-sided chipbreaker and centre hole? The single-sided chipbreaker promotes predictable chip formation for turning operations, while the centre hole with countersink secures the insert reliably in the clamping assembly for repeatable positioning. Can this insert be used for heavy interrupted cuts? The TPGT090202 TH10 is designed primarily for low‑force, finishing and general turning on non‑ferrous materials; for heavy interrupted cuts a more robust grade or geometry would be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, balanced GH110 wear resistance and a compact 0.4 mm corner radius for predictable tool life and consistent finishing. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. TPGT 090204 GH110 Tungaloy turning insert — ISO triangular insert for turning The TPGT090204 GH110 is an ISO‑standard triangular turning insert designed for external and internal turning in general machining applications. ISO‑standard triangular insert Tungaloy GH110 carbide grade 0.4 mm corner radius 11° clearance angle Cylindrical hole with 40°–60° countersink Predictable productivity through material and grade The insert’s core advantage is a precise combination of substrate and grade: carbide in the GH110 formulation delivers a measured balance of wear resistance and toughness. This balance reduces flank wear progression under typical turning conditions and supports longer intervals between index changes, which improves overall machine uptime. The ISO‑compliant geometry ensures dependable repeatability when paired with a suitable external holder or boring bar, giving production planners a transparent basis for process control and cost calculation. Geometry that stabilises cutting and chip control Designed as a triangular insert with an included angle of 60° and a 0.4 mm corner radius, the geometry provides a stable cutting edge for finishing passes and light roughing. The one‑sided chipbreaker controls chip flow for many common steels and non‑ferrous materials, while the 11° clearance angle minimises rubbing at the flank. The centre cylindrical hole with a one‑side countersink (40°–60°) guarantees secure seating and repeatable clamping, which directly supports dimensional consistency and surface quality during high‑volume runs. Easy integration into modular turning systems With an insert thickness of 2.38 mm and a designation matching ISO series requirements, the component integrates into standard indexable insert systems without special adaptions. The size designation 09 and the presence of the locating hole simplify matching to holders by form, free angle, tolerance class, fastening method, size and thickness. Where process stability is critical, selecting the correct holder and torque for the clamping screw ensures the insert reaches its designed potential for edge life and accuracy. Process benefits and application fit This turning insert is optimised for general turning: external and internal operations that demand a compromise between edge durability and cutting stability. The GH110 grade complements the geometry by offering consistent chip formation and a robust cutting edge suited to productive machining. For components requiring repeatable surface finish and tight dimensional control, the combination of graded carbide and targeted chipbreaking geometry reduces rework and contributes to a safer, more efficient production flow. Contact Metav Werkzeuge for tailored application advice or to secure stocks of this Tungaloy turning insert — our engineers advise on holder compatibility and cutting parameters Technical data Article number: 6808897 Manufacturer SKU: TUN6808897 SKU: 6808897-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Insert thickness: 2.38 mm Size designation: 09 Clearance angle: 11° Included angle: 60° Special features Material: Carbide Grade: GH110 (Tungaloy) Shape: Triangular Hole: Cylindrical hole with one‑side countersink (40°–60°) Chipbreaker: One‑sided Application: Turning (external and internal) ISO designation: TPGT090204 FAQ What materials is this insert suitable for? The TPGT090204 GH110 Tungaloy turning insert is formulated for a broad range of general machining tasks; the GH110 carbide grade provides a balance of wear resistance and toughness suitable for many steels and common workshop materials. How is the insert fixed in the holder? The insert uses a cylindrical locating hole with a one‑side countersink (40°–60°) for secure seating; appropriate clamping torque and a compatible external holder ensure repeatable placement for the Tungaloy turning insert (SKU 6808897‑Tungaloy). Which cutting applications benefit most from this geometry? The triangular 60° geometry with a 0.4 mm corner radius and one‑sided chipbreaker is particularly effective for finishing and light roughing in external and internal turning where controlled chip flow and surface quality are priorities. Can the insert be used for aggressive roughing? While the GH110 grade offers good edge stability, the TPGT090204 GH110 insert is optimised for general turning and finishing; for heavy roughing, consider grades and geometries specifically designed for high material removal rates. How to match the insert to a holder? Compatibility depends on form, free angle, tolerance class, fastening, size and thickness; confirm that the holder accepts ISO TPGT‑style inserts of size 09 and thickness 2.38 mm before mounting the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 GH330 Wendeplatten - Tungaloy
Take advantage of ISO compatibility, the GH330 Tungaloy grade and a compact 0.4 mm corner radius to achieve predictable tool life and stable chip control in turning operations; order directly via Metav Werkzeuge or contact our consultants for holder matching and application advice. TPGT090204 GH330 ISO triangular indexable insert for turning — Tungaloy The TPGT090204 GH330 is an ISO-form triangular indexable turning insert, designed for external and internal turning where consistent cutting-edge stability and dependable wear resistance are required. ISO triangular insert, 60° geometry GH330 grade for wear resistance and toughness Centre hole with cylindrical form and countersink 0.4 mm corner radius, single-sided chipbreaker Carbide substrate, 2.38 mm thickness Longer tool life through a balanced carbide grade The combination of the GH330 Tungaloy grade with a carbide substrate delivers a deliberate balance of wear resistance and toughness, which translates into extended tool life and fewer interruptions for index changes. The grade complements the insert geometry to support a stable cutting edge, reducing unexpected flank wear and sustaining productivity over longer series. This results in lower tooling consumption per part and more predictable process windows on CNC lathes. Stable chip control for reliable surface finish A single-sided chipbreaker on a triangular insert with a 60° included angle promotes controlled chip formation under a variety of turning conditions. Predictable chip flow minimises recutting and helps maintain a consistent metallurgical interaction at the cut, supporting repeatable surface quality. In practice, this improves first-pass yields and lowers rework rates, which is particularly valuable in precision turning operations. Fast, repeatable clamping and simple compatibility checks The insert’s centre hole with a cylindrical form and one-sided countersink (40°–60°) enables secure, repeatable clamping in standard ISO holders. Compatibility with a given holder is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness, so matching those parameters ensures correct seating and repeatable tool offsets. Clear identification of these elements reduces setup time and the potential for assembly errors. Size, geometry and relief angle for machining stability The 09 size, a 0.4 mm corner radius and a 60° triangle geometry make the insert suitable for a range of finishing and semi-finishing tasks in turning. The specified 11° relief angle reduces rubbing and helps preserve the cutting edge under interrupted cuts, contributing to stable cutting forces and improved dimensional consistency on the workpiece. These geometry choices are aimed at balancing edge strength with cutting performance. Robust system approach for industrial use This insert is intended to be used as part of a system: ISO indexable insert, suitable external holder or boring bar, a supporting shim/clamping set and replacement screws. Treating the tool as a system promotes process reliability: correct holder selection and secure clamping lead to stable vibrations, consistent chip formation and repeatable part tolerances. Systematic planning reduces downtime during index changes and tool replacements. Practical selection guidance for turning applications For efficient application, select the single-sided chipbreaker and the GH330 grade in relation to workpiece material, machining method and machine stability. The 2.38 mm thickness and carbide construction provide the mechanical basis for reliable cutting performance, while the chipbreaker and grade determine wear behaviour and edge strength. Where frequent index changes are costly, the GH330 balance of toughness and wear resistance helps lower total cost per part. Request holder and application matching from Metav Werkzeuge for this Tungaloy insert — our specialists will advise on the correct clamping kit and machining parameters to suit the intended turning task. Technical Data Manufacturer article number: 6808898 SKU: 6808898-Tungaloy Manufacturer SKU: TUN6808898 Model series: ISO-Drehwendeschneidplatten Material: carbide Application: turning Numbers / Core technical data Size designation: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with hole Special features Grade: GH330 (Tungaloy) Chipbreaker: single-sided Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) System components: insert, suitable external holder or boring bar, shim/clamping set, replacement screws ISO conformity for form and mounting compatibility FAQ Which clamping types are compatible with this insert? The insert uses a cylindrical centre hole with a one-sided countersink (40°–60°) and is compatible with ISO triangular holders and boring bars that match the insert form, relief angle, size and thickness; the system typically comprises the insert, an appropriate holder, shim/clamping set and replacement screws. What does the GH330 grade offer compared with other grades? The GH330 Tungaloy grade combines wear resistance and toughness, extending tool life while maintaining cutting-edge stability; this makes the insert suitable for operations where a balanced performance between durability and edge strength is required. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and helps produce a robust cut with reduced risk of chipping on interrupted cuts, improving dimensional stability and surface finish in many turning applications. Is the insert suitable for internal and external turning? Yes, the triangular 60° geometry and ISO form allow the insert to be used for both external and internal turning when paired with the correct holder and clamping components. What dimensions should be matched when choosing a holder? Match the insert form, relief angle (11°), tolerance class, fixing method, size (09) and thickness (2.38 mm) to the holder specifications to ensure correct seating and repeatable tool offsets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 GT9530 Wendeplatten - Tungaloy
Take advantage of the proven combination of coated cermet GT9530 for extended tool life and ISO-standard geometry for easy holder compatibility; this delivers consistent surface quality and predictable production cycles. Order the insert directly via Metav Werkzeuge or consult their experts for application-specific selection. TPGT090204 GT9530 Tungaloy turning insert — coated cermet, 0.4 mm nose radius TPGT090204 GT9530 is a triangle-form, ISO-indexed turning insert designed for finishing to light universal turning of steel components. Coated cermet grade GT9530 Triangle insert, 09 size, 60° geometry 0.4 mm nose radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent surface quality with a wear-resistant grade The coated cermet GT9530 is engineered for finishing to light universal turning on steel where a superior surface and predictable tool life are priorities. The microstructure and coating promote stable wear progression rather than abrupt failure, so components achieve improved surface integrity with fewer rework cycles. This makes the insert particularly suitable where dimensional accuracy and reduced downstream polishing are important, delivering measurable productivity gains during stable cutting conditions. Precision geometry that supports repeatable results The triangular form with a 60° cutting geometry and a 0.4 mm nose radius provides the balance between sharpness and edge strength needed for finely finished contours. The 11° relief angle ensures reliable cutting clearance while the 2.38 mm plate thickness contributes to rigidity in the tool assembly. As an ISO indexable insert, compatibility to holders depends on form, relief angle, tolerance class, fastening and thickness—factors that simplify replacement and set-up in standard tool systems for consistent, repeatable performance. Secure seating and efficient chip control in practical systems A cylindrical hole with single-side countersink (40°–60°) gives secure clamping and reliable seating in compatible holders; this reduces the risk of position shift under cutting loads. The one-sided chipbreaker is tailored to generate short, controllable chips when paired with the appropriate machining parameters and stability conditions. Together, these features minimise interruptions from chip-related issues and support steady-cycle machining in both external and internal turning tasks. Clear application scope and selection advice Intended primarily for turning applications on steel, this insert suits external and internal finishing where long tool life under stable conditions and high surface quality are required. Select the chipbreaker and cermet grade according to workpiece material, machining approach and machine rigidity. For broader or roughing tasks, consider alternative grades; for precision finishing, the GT9530 grade offers a reliable compromise of wear resistance and surface quality. Contact Metav Werkzeuge for tailored advice on selecting the correct Tungaloy insert and to arrange supply of TPGT090204 GT9530 (SKU 6997882-Tungaloy) Technical data Article number: 6997882-Tungaloy Manufacturer article number: 6997882 Manufacturer SKU: TUN6997882 Model series: ISO indexable inserts Designation: TPGT090204 GT9530 Numbers / Core technical data Size: 09 Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 11° Geometry angle: 60° Countersink angle: 40°–60° Designs / Special features Material: cemented carbide Grade/coating: GT9530 (coated cermet) Chipbreaker: one-sided Shape: triangular insert Mounting: cylindrical hole with single-side countersink Application: turning (external and internal) FAQ What materials is this insert best suited for? The GT9530 grade is formulated as a coated cermet primarily for steel machining; the insert performs best in finishing to light universal tasks where surface quality and tool life are priorities. Can this insert be used for both external and internal turning? Yes. The triangular TPGT090204 GT9530 insert is suitable for both external and internal turning when matched with the appropriate holder and machining parameters. How does the 0.4 mm nose radius affect part finish? A 0.4 mm nose radius balances edge strength and sharpness, improving surface finish on turned components while maintaining resistance to minor edge chipping under stable conditions. What should be checked to ensure holder compatibility? Compatibility depends on insert form, relief angle, tolerance class, fastening type, size and thickness; verify these dimensions against the chosen holder to ensure correct seating and clamping. Is the chipbreaker suitable for heavy roughing operations? The one-sided chipbreaker on this grade is optimised for controlled chip formation during finishing and light universal cuts; for heavy roughing, a different chipbreaker and grade are recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a precise 60° geometry, a coated cermet GT9530 for finishing, and a fine 0.4 mm corner radius to secure consistent surface quality and longer tool life in stable turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TPGT 090204 GT9530 – ISO triangular turning insert for turning by Tungaloy The TPGT 090204 GT9530 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for fine finishing on steel with a coated cermet grade for improved surface quality and extended life. Triangular ISO insert, 60° geometry Coated cermet grade GT9530 for finishing 0.4 mm corner radius for fine surface Cylindrical hole with one-sided countersink Predictable geometry for consistent machining results The triangular ISO insert features a defined 60° included angle and an 11° clearance that together produce stable cutting engagement and predictable chip flow. These geometric parameters support repeatable tool positioning and minimise vibration when used in appropriately rigid setups. The plate thickness of 2.38 mm and the standard size designation ensure compatibility with holders specified for ISO turning inserts; compatibility is governed by the insert form, clearance angle, tolerance class, fixing method, size and thickness. Such determinism in geometry reduces setup time and improves process reliability in production environments. Coated cermet grade engineered for finishing and longevity The coated cermet GT9530 combines wear resistance with an emphasis on surface finish, making the grade well suited to finishing and light universal turning of steel under stable conditions. The coating enhances temperature resistance and edge stability, which in turn extends effective tool life and maintains a consistent surface quality over longer runs. The small 0.4 mm corner radius aids in producing refined external and internal profiles while limiting cutting forces—beneficial when a high-quality surface is the prime objective rather than heavy material removal. Practical system and mounting guidance for dependable use The system consists of the ISO turning insert, a matching external holder or boring bar, a shim/locking set and spare screws. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) which secures firm clamping and correct axial positioning in the pocket. For correct function, select holders that match the insert’s form and 11° relief; ensure tolerance class and fixing method are compatible to avoid misalignment. Proper clamping and a rigid tool assembly are essential to exploit the grade’s surface benefits and to avoid premature wear. Production benefits and suitability for workshop workflows Adopting this indexable triangular geometry with a single‑sided chipbreaker simplifies edge control and makes tool management straightforward in serial production. The combination of GT9530’s wear resistance and the insert’s geometry supports lower downtime through longer intervals between indexings, which helps maintain throughput. For operations prioritising surface finish and repeatability, this insert provides a balance of economy and performance when cutting steel under stable conditions in turning applications. For application support or to procure the Tungaloy TPGT 090204 GT9530 insert (manufacturer article number 6997873), please contact Metav Werkzeuge for tailored advice and next‑step ordering assistance Technical Data Article number: 6997873 SKU: 6997873-Tungaloy Manufacturer SKU: TUN6997873 Model series: ISO turning indexable inserts Material: cemented carbide Numbers / Core technical data Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Size: 09 Designs / Special features Coating / grade: GT9530 (coated cermet) Chipbreaker: one-sided Plate shape: triangular Hole: with cylindrical hole + single-side countersink (40°–60°) Application: external and internal turning; finishing to light universal turning FAQ What materials is this insert suitable for? The GT9530 coated cermet insert is intended primarily for machining steel in finishing and light universal turning operations; it performs best under stable cutting conditions where surface quality and extended tool life are required. How does the 0.4 mm corner radius affect the finish? A 0.4 mm radius helps produce a finer surface finish by reducing edge chipping and smoothing the cut; the result is improved part appearance and reduced need for secondary finishing. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and plate thickness; select an ISO‑compliant holder that matches the insert’s 60° geometry and 11° clearance for secure clamping. How should the insert be clamped given the hole style? The cylindrical hole with a single‑side countersink (40°–60°) provides positive axial location and stable clamping when used with the correct screw and shim assembly; ensure screws and clamping elements match the holder specifications. Is the GT9530 grade suitable for heavy roughing? GT9530 is formulated as a wear‑resistant cermet for finishing to light universal turning; it is not optimised for heavy roughing where different grades and tool geometries would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 NS520 Wendeplatten - Tungaloy
Take advantage of a finishing-grade Cermet NS520 for improved surface quality together with a 0.4 mm nose radius for consistent dimensional control; the compact triangular form and 11° clearance ensure compatibility with standard ISO turning holders. Order directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. TPGT090204 NS520 turning indexable insert by Tungaloy — ISO 090204, triangular 60° geometry The TPGT090204 NS520 is an ISO-standard triangular turning insert designed for finishing and light turning of steel, offering optimised wear behaviour and stable surface results in precision applications. ISO triangular insert, 60° geometry Cermet grade NS520 for finishing steel 0.4 mm nose radius for fine surface finish Cylindrical hole with single-side countersink Consistent finishing and dimensional stability The triangular, ISO-standard geometry delivers a predictable cutting edge for precise finishing and close tolerances. With the Cermet NS520 grade, the insert is formulated to provide a uniform wear pattern, which supports repeatable part quality over longer tool life. The relatively small 0.4 mm nose radius concentrates the cutting forces for fine surface generation while helping to maintain dimensional accuracy in external and internal turning operations. In practice, this combination reduces rework and contributes to a more economical production flow by lowering scrap rates and stabilising cycle times. Mounting, compatibility and process guidance Compatibility with toolholders is determined by shape, clearance angle (11°), tolerance class, fastening method, size and thickness; the insert’s cylindrical hole with a one-sided countersink (40°–60°) enables secure seating and reliable clamping with common ISO holders. The 2.38 mm plate thickness and triangular 09 size are standard dimensions that simplify selection for modular turning systems. When integrating the insert into an existing toolset, match the holder form and fastening geometry; selecting a holder with appropriate rigidity and positive support ensures the chipbreaker and edge condition perform as intended for finishing tasks. Why the NS520 cermet improves productivity The grade’s formulation focuses on surface integrity and consistent wear rather than aggressive metal removal, making it particularly suitable for final passes where surface finish and dimensional control are priorities. The single-sided chipbreaker promotes manageable chip formation during finishing operations, while the cermet’s hardness and coating characteristics contribute to stable edge retention. For workshops aiming to enhance first-pass quality and reduce inspection cycles, the insert offers a technically efficient solution that balances tool life with surface performance. For technical consultation on Tungaloy turning inserts or to order item TUN6808894 directly, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on holder compatibility and optimal cutting parameters. Technical data Article number: 6808894-Tungaloy Manufacturer SKU: TUN6808894 Manufacturer article number: 6808894 Model series: ISO-Drehwendeschneidplatten Material: Carbide Numbers / Core technical data Geometry angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Nose radius: 0.4 mm Plate size: 09 Special features Grade: Cermet / coated cermet NS520 Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular Application: turning FAQ Is this insert suitable for finishing steel? Yes. The NS520 cermet grade is specifically optimised for finishing to achieve high surface quality and dimensional accuracy with steel components when used as a final-pass insert. Which holders are compatible with the insert? Compatibility depends on form, clearance angle, tolerance class, fastening and size; the triangular ISO form and the cylindrical hole with countersink make the insert compatible with standard ISO triangular turning holders designed for 09-size plates. Can the insert be used for internal turning? Yes. The geometry and chip control are suitable for both external and internal turning when combined with a suitably rigid boring bar or holder that matches the ISO seat and clamping method. What are the benefits of the single-sided chipbreaker? The single-sided chipbreaker supports predictable chip formation during finishing passes, improving surface integrity and reducing the risk of chip-related interruptions in short to medium-length turning operations. How does the NS520 grade affect tool life and wear? NS520 is engineered for uniform wear and improved surface finish rather than maximum metal removal rates; this leads to stable edge condition across finishing cycles and consistent part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, low‑force uncoated cermet grade and precise geometry for uninterrupted finishing cuts; robust mounting and ISO conformity support consistent productivity. Order the TPGT090204 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 090204 NS9530 Tungaloy insert for turning The TPGT090204 NS9530 Tungaloy insert is an ISO‑standard triangular turning insert designed as a finishing grade for external and internal turning of steel. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces ISO TPGT 09 triangle with 0.4 mm corner radius Cylindrical hole with 40°–60° single countersink Precision finishing that raises throughput The uncoated cermet NS9530 is engineered for consistent high surface finish during light, continuous cuts. Its geometry—a triangular 09 insert with a 0.4 mm corner radius—minimises vibraÂtion at small depths of cut and reduces cutting resistance, delivering measurable productivity gains in finishing operations. As an ISO‑standard indexable insert, compatibility with holders is determined by form, clearance, tolerance class, fastening and thickness; matching the insert to a suitable external holder or boring bar ensures stable clamping and repeatable results for serial production. Designed for reliable mounting and straightforward application With a thickness of 2.38 mm, an 11° clearance angle and a cylindrical hole plus a single‑side countersink (40°–60°), the insert offers secure seating and torque distribution for tight‑tolerance turning. The single‑sided chipbreaker supports predictable chip flow in continuous feeds, reducing the need for frequent intervention and aiding process reliability. Clear, measurable specifications simplify tool selection and reduce setup time for production engineers and toolroom staff, enabling faster ramp‑up and fewer quality rejections. Material match and machining benefits As a finishing grade, this insert excels on steel where a sharp cutting edge delivers low cutting forces and extended contact life under the right cutting parameters. The single‑sided chipbreaker is optimised for continuous cuts and small feed ranges, improving surface integrity while keeping tool wear steady. Choosing this grade supports a cost‑effective balance between tool life and part quality, with the uncoated cermet chemistry offering thermal stability and a fine cutting edge for precision components. For precision finishing of steel using Tungaloy quality, contact Metav Werkzeuge to secure the TPGT090204 NS9530 insert and obtain tailored application advice from Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6997971 SKU: 6997971-Tungaloy Manufacturer SKU: TUN6997971 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TPGT090204 Insert size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Grade: NS9530 (uncoated cermet) Shape: triangular Hole: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Material: Hartmetall Application: turning (external and internal) FAQ What machining tasks is this insert best suited for? The TPGT090204 NS9530 Tungaloy insert is intended for finishing operations on steel, offering a sharp edge and low cutting forces for continuous light cuts and high surface quality. How does the insert secure to a holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) and must be matched with a compatible holder accounting for form, tolerance and thickness to ensure stable clamping of the TPGT090204 NS9530 insert. Which materials can be machined with this grade? This uncoated cermet grade NS9530 is optimised for steel finishing; its edge and chip‑control geometry favour steady feeds and small depths of cut to achieve good surface integrity. What are the key geometric specifications to check before use? Check insert size (09), thickness (2.38 mm), corner radius (0.4 mm) and clearance angle (11°) to confirm compatibility with the chosen external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of cermet finishing performance, precise 60° geometry and secure clamping for consistent surface quality and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. TPGT090204 NS9530 Tungaloy turning insert — triangular finishing insert for precision turning The TPGT090204 NS9530 Tungaloy turning insert is an ISO‑format, triangular indexable insert designed for finishing operations in steel, offering a sharp cutting edge and low cutting forces for improved surface quality. Cermet grade NS9530 for superior finishing Sharp edge geometry for low cutting forces Triangular 60° form with 0.4 mm corner radius Cylindrical hole with single‑side countersink Consistent finishing with a cermet cutting edge The uncoated cermet grade NS9530 is optimised for finish turning of steel, where a sharp cutting edge and low cutting forces are essential. This composition promotes a fine surface finish and reduced burr formation during continuous cuts and small depths of cut. Compared with general‑purpose grades, the finishing grade lowers the tendency to form built‑up edge, which helps to keep tolerances stable and reduces downstream rework. Secure seating and stable cutting geometry A repeatable tool‑holder interface is essential for accurate turning. The triangular 60° geometry, combined with an 11° clearance angle and a nominal corner radius of 0.4 mm, provides predictable contact conditions and reliable edge strength during finishing passes. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), ensuring positive clamping and consistent axial position in compatible holders and boring bars. The plate thickness of 2.38 mm contributes to rigidity without compromising accessibility in confined setups. Application scope and process benefits Designed for both external and internal turning, the single‑sided chipbreaker on this insert supports chip control in continuous finishing cuts on steel. By selecting the NS9530 finishing grade and matching the chipbreaker to the workpiece and machining parameters, process planners can expect improved first‑pass quality and reduced secondary operations. The standard ISO format and size designation facilitate inventory management within an ISO system, allowing straightforward replacement and minimal machine downtime. For tailored advice on using the TPGT090204 NS9530 insert in specific turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability and cutting‑data support. Technical data Article number: 6997957 SKU: 6997957-Tungaloy Manufacturer SKU: TUN6997957 Model series: ISO turning indexable inserts Insert designation: TPGT090204 NS9530 Facts Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Size: 09 Special features Material: cemented carbide substrate Grade: uncoated cermet NS9530 Hole: with hole Hole style: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑sided Shape: triangular Application: external and internal turning FAQ What materials is this insert intended for? The NS9530 uncoated cermet finishing grade is intended primarily for finishing operations in steel; the TPGT090204 NS9530 insert performs best where low cutting forces and a sharp edge are required. How does the 0.4 mm corner radius affect the surface finish? A 0.4 mm corner radius on the TPGT090204 NS9530 provides a balance between edge strength and a fine surface finish, reducing vibration while maintaining good profile accuracy. Is the insert compatible with standard ISO triangular holders? Yes, the TPGT090204 format follows the ISO geometry for triangular inserts; the cylindrical hole and countersink allow secure clamping in holders designed for this designation. What benefit does the uncoated cermet grade NS9530 bring to finishing? The NS9530 cermet offers a sharp edge and stable cutting behaviour for continuous finishing cuts, which leads to improved surface quality and fewer secondary finishing steps. Which chipbreaker should be selected for interrupted cuts? For interrupted or unstable cuts, a chipbreaker and grade combination different from the finishing NS9530 is usually advised; for continuous finishing the single‑sided chipbreaker on this insert provides good chip control. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet NS9530, triangle ISO geometry and low cutting forces for consistent surface quality and predictable tool life. Order the TPGT090204 NS9530 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 090204 NS9530 indexable insert for turning — Tungaloy, triangle, finishing grade The TPGT090204 NS9530 is an ISO-standard triangle indexable insert engineered for precision finishing of steel in both external and internal turning applications. Triangle ISO geometry, size 09 Uncoated cermet NS9530 finishing grade 0.4 mm corner radius for fine edges 11° clearance and 60° included angle Consistent finishing performance with low cutting forces The insert delivers a stable finishing performance thanks to the uncoated cermet composition NS9530, which combines a sharp cutting edge with low cutting forces. This results in improved surface quality and reduced vibration during continuous cutting and light depth-of-cut operations. The chemical and microstructural characteristics of the cermet ensure edge integrity at finishing feed rates, so the machining process becomes more predictable and repeatable for high-quality components. Geometry and clamping designed for compatibility and process reliability ISO standardisation of the insert ensures compatibility by form, relief angle and tolerance class with a wide range of holders. The triangle geometry and 60° included angle permit three usable cutting edges per insert, while the cylindrical hole with one-sided countersink (40°–60°) secures repeatable seating and clamping. Specifying the correct holder profile and the matching clamp or adaptor guarantees correct seating and reliable chip evacuation for consistent cycle times. Fine edge control and secure cutting for surface-critical parts A 0.4 mm corner radius paired with 11° clearance supports a sharp effective cutting edge with controlled edge strength—especially beneficial for finishing steels where surface integrity matters. The single-sided chipbreaker is optimised for small depths of cut, promoting manageable chip forms and avoiding edge loading that could compromise finish. The 2.38 mm insert thickness contributes to rigidity and stability at the cutting zone, aiding dimensional accuracy on delicate finishing passes. Selection guidance and system considerations for efficient planning When integrating this insert into production, select the chipbreaker and grade to suit workpiece material, machining stability and feed strategy; the NS9530 grade is intended for finishing of steel with continuous cuts and small feed rates. Compatibility depends on holder shape, free clearance angle, size and thickness; confirm these parameters with component tolerances and the chosen toolholder. For further specification matching or batch requirements, Metav Werkzeuge can assist with application-oriented recommendations and availability. For precision finishing with the Tungaloy NS9530 indexable insert, contact Metav Werkzeuge for technical matching and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge staff will advise on the suitable holder and set-up. Technical data Article number: 6997972 SKU: 6997972-Tungaloy Manufacturer article number: TUN6997972 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: TPGT090204 NS9530 Facts Corner radius: 0.4 mm Clearance (relief) angle: 11° Insert thickness: 2.38 mm Insert size: 09 Included angle: 60° Hole style: cylindrical hole + one-side countersink (40°–60°) Special features Uncoated cermet NS9530 grade Triangle insert shape Single-sided chipbreaker ISO-standardised insert Suitable for external and internal turning Intended for finishing of steel and continuous cuts FAQ Which workpiece materials is this insert suited for? The TPGT090204 NS9530 insert is designed primarily for finishing steel, with the uncoated cermet NS9530 grade providing a sharp edge and low cutting forces ideal for continuous cuts and small depths of cut. What are the key geometric specifications of the insert? The insert features a triangle geometry with a 60° included angle, a 0.4 mm corner radius, 2.38 mm thickness and size 09, specified to match ISO holders and clamps for secure seating. Is the cutting material coated? No, this is an uncoated cermet grade (NS9530), chosen for its ability to produce high-quality surface finishes with reduced cutting forces in finishing operations. How does the hole and countersink affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable positioning and reliable clamp engagement; compatibility still depends on holder form, tolerance and clearance, so matching to the toolholder is essential. For which turning operations is this insert recommended? This indexable insert suits precision finishing in both external and internal turning, especially where continuous cutting and small feeds are used to achieve superior surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade, precise 0.4 mm corner radius and ISO compatibility for efficient, repeatable turning operations. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGT 090204 TH10 Tungaloy indexable insert for Turning, 60° TPGT090204 TH10 is an ISO-compliant triangle insert designed for general external and internal turning, optimised for non-ferrous materials and operations requiring low cutting forces and clean surfaces TPGT090204 TH10 triangle insert for turning Uncoated carbide for low cutting forces 0.4 mm corner radius for fine surface finish 11° clearance with cylindrical hole and countersink Consistent low cutting forces for cleaner finishes The triangular insert delivers a reliably sharp cutting edge thanks to its uncoated carbide grade TH10, which is chosen specifically to reduce cutting forces in non-ferrous applications. Lower forces translate into less tool deflection and a more consistent surface appearance on shafts and bores. The modest corner radius of 0.4 mm balances edge strength with the ability to achieve fine surface quality, making the insert suitable for finishing passes where dimensional stability and surface integrity matter. ISO form and secure clamping for predictable repeatability Manufactured to the ISO turning insert family, the component ensures straightforward interchangeability with compatible holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the 11° clearance and the cylindrical hole with one-sided countersink (40°–60°) provide reliable seating and repeatable positioning in the clamping pocket. This stable assembly reduces setup variance and supports higher process reliability during batch production or serial machining. Economy of use and targeted application advantages The triangle form and the single-sided chipbreaker are tuned for economical indexable use and controlled chip formation in turning operations. A plate thickness of 2.38 mm and the single-sided chipbreaker make the insert robust under light to medium cutting conditions while remaining easy to index and replace. For workshops working primarily with aluminium, brass and similar alloys, this insert offers a practical balance between tool life and finish quality, helping to maintain productivity without overcomplicating toolchoice. Contact Metav Werkzeuge for technical guidance on selecting the right Tungaloy turning insert and for current availability and delivery options Technical data Article number: 6808901 SKU: 6808901-Tungaloy Manufacturer SKU: TUN6808901 Designation: TPGT090204 TH10 Material: carbide Facts Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 60° Size: 09 Special features Triangle plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Uncoated grade TH10 ISO turning insert series Application: turning (external and internal) FAQ What materials is this insert best suited for? The TPGT090204 TH10 insert is designed primarily for non-ferrous materials; the uncoated TH10 carbide supports low cutting forces and clean surface generation in aluminium and similar alloys. How does the cylindrical hole and countersink affect mounting? The cylindrical hole with a one-sided countersink ensures stable seating and accurate repeatability in standard ISO holders, helping the insert maintain consistent orientation and clamping force. Is the corner radius suitable for finishing? Yes, the 0.4 mm corner radius is a compromise between edge strength and the capacity to produce fine surface finishes during finishing passes. Can this insert be used for internal turning as well as external turning? The insert’s ISO geometry and 11° clearance make it suitable for both external and internal turning operations when paired with the appropriate holder and tool overhang management. What does the single-sided chipbreaker provide in practice? The single-sided chipbreaker aids controlled chip formation under typical turning conditions, improving chip evacuation and lowering the risk of built-up edge on the cutting face. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 090204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 grade, the 0.4 mm nose radius and the standardised triangle form for reliable turning results; fast index changes and predictable chip control support steady production. Order the insert directly via Metav Werkzeuge or contact the consultants for machining guidance. TPGT 090204 TH10 indexable turning insert by Tungaloy — 60° triangle, uncoated carbide TPGT 090204 TH10 is an ISO-indexable triangular insert designed for general turning applications where low cutting forces and clean surface finishes are required. Triangle insert, ISO 09 size, 60° angle Uncoated carbide for low cutting forces 0.4 mm nose radius for fine surface finish Cylindrical hole with single-sided countersink Consistent cutting with a sharp universal grade The combination of the TH10 grade and uncoated carbide substrate delivers a cutting edge engineered for low cutting forces and improved surface quality in non-ferrous materials and similar applications. The 0.4 mm nose radius contributes to a fine surface finish while maintaining dimensional control on external and internal turning operations. As a consequence, cycle times remain predictable and rework is reduced, supporting a more efficient production flow. Standardised geometry for reliable clamping and repeatability Being part of the ISO-series, the insert benefits from a proven triangle form with a 60° included angle, enabling straightforward replacement and multiple indexing positions. The 11° clearance angle and 2.38 mm thickness combine to provide stability during cutting, while the cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping in compatible holders. These measured characteristics make the insert suitable for stable setups where repeatable results are essential. Practical chip control and application guidance The single-sided chipbreaker is matched to the grade to encourage stable chip formation when machining softer metals and alloys; selection of the chipbreaker and holder should reflect workpiece material, machining strategy and machine stability. For turning tasks that prioritise low cutting resistance and surface integrity, this insert is a cost-effective solution. If additional process data or machining parameters are required, Metav Werkzeuge can provide tailored recommendations based on spindle speed, feed and depth of cut. Contact Metav Werkzeuge for advice on integrating Tungaloy TH10 inserts into production — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808896 Manufacturer SKU: TUN6808896 Label: TPGT090204 TH10 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Specifications Corner radius: 0.4 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Size: 09 Features & Application Material: carbide Grade: TH10 (uncoated) Shape: triangular Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) ISO-indexable system, compatible with matching holders and clamping sets FAQ What materials is this insert suited for? The TH10 grade and uncoated carbide substrate are optimised for non-ferrous materials and situations where a sharp edge and low cutting forces support clean surfaces; the insert performs well in such turning tasks. How does the corner radius affect the finish? A 0.4 mm nose radius offers a balance between surface quality and edge strength, producing finer finishes than larger radii while still providing adequate tool life in standard turning operations. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry for triangular turning inserts; compatibility depends on form, clearance angle, tolerance class, clamping and thickness, so use matching ISO holders and clamping sets. What chip control can be expected from the chipbreaker? The single-sided chipbreaker promotes controlled chip formation for the targeted material groups; selection of chipbreaker and process parameters should match workpiece material and machine rigidity. Which product identifiers should be referenced when ordering? Reference the label and article numbers: TPGT090204 TH10 (article number 6808896, manufacturer SKU TUN6808896) to ensure the correct insert and grade are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com