TPGT 070102 SH7025 Wendeplatten - Tungaloy
Take advantage of the coated cemented carbide SH7025 grade and the ISO compatibility of this triangular insert to secure consistent edge life and reliable chip control in turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. TPGT 070102 SH7025 Tungaloy turning insert — triangular 07 for Turning TPGT 070102 SH7025 Tungaloy turning insert is an ISO-standard triangular indexable insert designed for external and internal turning applications, offering a robust cutting edge for variable engagement conditions. Coated cemented carbide SH7025 grade Triangular insert, 60° cutting geometry 0.2 mm corner radius for finishing Cylindrical hole with 40°–60° countersink Consistent performance for variable cutting conditions The TPGT070102 SH7025 insert combines a coated cemented carbide substrate with a grade formulated for edge stability and toughness. This balance reduces the risk of premature chipping when machining with small tools or under changing engagement conditions, which supports steady production output. The SH7025 grade is optimised for a broad range of steels and mixed workpiece scenarios; the coating improves wear resistance and helps maintain a predictable tool life, enabling planners to estimate tool-change intervals with greater confidence. Designed for straightforward holder compatibility and secure clamping Manufactured to ISO dimensions, the insert features a triangular geometry with a 60° included angle and a standard size designation 07, which ensures compatibility with many commercial turning holders and boring bars. The body includes a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and repeatable seating. These attributes simplify toolroom logistics: holders can be selected based on form, relief angle, tolerance class, fastening type and thickness to match the insert’s specifications, reducing setup time and assembly errors. Practical guidance for machining and chip control A 0.2 mm corner radius provides a balance between edge strength and surface finish, making the insert suitable for light to medium passes where a good finish is required. The single-sided chipbreaker is matched to common turning tasks and should be chosen with regard to workpiece material and machining stability; selecting the appropriate chipbreaker and grade helps control chip form, protect the cutting edge and increase process reliability. For finishing passes the small radius reduces mark depth, while adequate feed and speed selection preserves the coating’s protective effect. For application-specific recommendations on the Tungaloy SH7025 turning insert and to secure reliably stocked items, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6967566 SKU: 6967566-Tungaloy Manufacturer SKU: TUN6967566 Model series: ISO turning inserts Data Designation: TPGT070102 Grade: SH7025 Material: cemented carbide Size: 07 Thickness: 1.59 mm Corner radius: 0.2 mm Special features Triangular insert, 60° included angle Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker ISO-compatible form and tolerances Intended use: Turning (external and internal) FAQ What materials is this insert suited for? The TPGT070102 SH7025 turning insert (Tungaloy, indexable insert, SKU 6967566-Tungaloy) is intended for a wide material spectrum including various steels; the SH7025 grade provides toughness and edge stability for mixed workpiece conditions. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius reduces cutting edge stress while delivering a finer surface finish compared with larger radii; the small radius on this triangular insert supports finishing and light machining passes. Is the insert compatible with standard ISO holders? Yes — the insert is ISO-standardised in form and size (TPGT070102, size 07) and is compatible with holders that match the insert’s form, relief angle and fastening method. Can the insert be used for internal turning or boring? The geometry and chip control features allow use in both external and internal turning; selection of an appropriate holder and stable setup ensures best results with this insert. What is the purpose of the countersunk cylindrical hole? The cylindrical hole with single-sided countersink (40°–60°) secures repeatable seating and stable clamping in indexable holders, improving positional accuracy and cutting stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, coated carbide grade and precise 60° geometry for stable, predictable turning performance; the triangular ISO format delivers reliable clamping and consistent chip control. Order the TPGT070102 SH725 Tungaloy insert directly via Metav Werkzeuge or ask the consultants if needed. TPGT070102 SH725 ISO turning insert (triangular, 60°) by Tungaloy The TPGT070102 SH725 is an ISO-standard triangular indexable insert engineered for external and internal turning, combining a tough cutting grade with secure clamping features. Coated carbide grade SH725 for edge stability ISO-standard triangular shape, 60° included angle Cylindrical hole with single-side countersink Single-sided chipbreaker for controlled chips Consistent performance through a tough grade and ISO conformity The combination of a coated carbide cutting material and the SH725 grade produces a tough, edge-stable insert that is particularly effective when engagement conditions change or when small tools are used. As an ISO-standard triangular plate, the insert is dimensioned to match standard external holders and boring bars; compatibility depends on form, free clearance 11°, tolerance class, clamping method, size and plate thickness. This makes the component a practical choice where reliable repeatability and predictable tool life are priorities. Geometry and clamping engineered for secure cutting A 60° triangle with a 0.2 mm corner radius provides a balance between strength and a fine cutting edge, while the 1.59 mm plate thickness ensures stable support during radial loading. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to allow positive, reproducible clamping with a shim and clamp set; this arrangement reduces micro-movement and supports steady surface finish. The single-sided chipbreaker design aids chip control in a wide range of turning operations, reducing risk of re-cutting and helping to maintain cycle-time consistency. System approach for predictable machining results Use the insert as part of a complete system: the ISO triangular plate plus a matching external holder or boring bar, an appropriate underlay/shim and the correct clamping screws. Selection of holder geometry, tolerance class and mounting torque is decisive for achieving the advertised edge stability of the SH725 grade and for optimising tool life. For process planners and shopfloor engineers, this approach reduces setup variation and supports repeatable, measurable improvements in productivity and surface quality. Contact Metav Werkzeuge GmbH for application advice on Tungaloy turning inserts such as the TPGT070102 SH725; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737303 Manufacturer SKU: TUN6737303 SKU: 6737303-Tungaloy Designation: TPGT070102 SH725 Material: Hartmetall Model series: ISO turning inserts Facts Included angle: 60° Free clearance: 11° Corner radius: 0.2 mm Thickness: 1.59 mm Size: 07 Special features Coated carbide grade SH725 Triangle plate form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Application: turning System components: ISO insert, holder/boring bar, shim/clamp, spare screws FAQ Which machining operations are suitable for this insert? The TPGT070102 SH725 insert is designed for external and internal turning operations; its SH725 grade is optimised for changing engagement conditions and for use with smaller tool assemblies. How is holder compatibility determined? Compatibility is defined by form, free clearance (11°), tolerance class, clamping method, plate size and thickness; the ISO designation ensures straightforward matching with standard holders when these factors align. What clamping features does the plate provide? The plate includes a cylindrical hole with a one-sided countersink (40°–60°), allowing secure clamping with a shim and clamp set to ensure repeatable seat and reduced movement. What advantages does the SH725 grade offer? SH725 provides a tough, edge-stable performance that supports reliable chip formation and sustained cutting edges under variable engagement and intermittent cutting conditions. Which dimensions are most important when planning a tool setup? Key dimensions to note are the 60° included angle, 0.2 mm corner radius, 1.59 mm thickness and the 11° free clearance; these determine strength, contact conditions and compatibility with holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide toughness, ISO‑compliant triangular geometry and a 0.2 mm corner radius for consistent turning results; order the TPGT070102 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. TPGT070102 SH725 Tungaloy indexable turning insert — triangular, 0.2 mm radius A TPGT070102 SH725 indexable turning insert engineered for ISO‑standard external and internal turning operations, optimised for variable engagement conditions and small‑tool applications. ISO triangular insert TPGT 070102, 60° included angle Coated carbide grade SH725 for stable cutting edges 0.2 mm corner radius for fine finishing and accuracy Cylindrical hole with 40°–60° single‑side countersink Reliable performance for variable engagement conditions The triangular indexable insert delivers a balance of toughness and edge stability through the SH725 coated carbide grade, developed for turning where cutting conditions change frequently. The ISO‑conforming form and dimensions ensure predictable behaviour in a wide range of set‑ups; choosing a grade that supports small tools and intermittent cuts reduces edge chipping and maintains process reliability. The result is less unscheduled downtime and more repeatable component quality during serial production. Geometry that supports dimensional accuracy and finish A 60° triangular shape combined with a 0.2 mm corner radius and an 11° clearance angle produces a controlled contact geometry that helps to reduce cutting forces and vibration. The modest corner radius is particularly suited to finishing passes where surface integrity and tight tolerances matter; it allows accurate radius blending and predictable toolpath management. This geometry also eases toolpath programming on lathes and turning centres, supporting consistent surface finish and precise diameters. Secure clamping and straightforward system integration Compatibility with holders is determined by form, clearance, tolerance class, fixing method, size and thickness; the cylindrical hole with single‑side countersink (40°–60°) ensures reliable seating and repeatable clamping. The insert thickness of 1.59 mm and the standard ISO size "07" allow use in a wide selection of external holders and boring bars when the appropriate adapter or clamp set is used. The single‑side chipbreaker is suitable for many finishing and medium‑cutting tasks, but selecting the chipformer to match workpiece material and stability will further improve chip control. Coating and grade selection for productive machining The SH725 coating and substrate combination is designed to provide a tough, edge‑stable performance that extends tool life under variable feeds and interrupted cuts. In practice this translates into fewer indexings, steadier process windows and improved overall productivity. Where higher process security or finer surface finishes are required, pairing the insert with a stable holder and optimised cutting data will maximise the benefit of the coating and geometry without compromising part quality. For procurement or machining advice on the Tungaloy SH725 insert, contact Metav Werkzeuge for ordering and tailored application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737295 Manufacturer SKU: TUN6737295 Internal SKU: 6737295-Tungaloy Facts ISO designation: TPGT070102 Shape/size: triangular, 07 Corner radius: 0.2 mm Thickness: 1.59 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide (cemented carbide) Coating / grade: SH725 (coated carbide) Hole: with hole — cylindrical + single‑side countersink (40°–60°) Chipbreaker: single‑side Typical application: external and internal turning FAQ What materials is this insert suitable for? The TPGT070102 SH725 insert is a coated carbide grade designed for a broad range of turning tasks; its toughness and edge stability suit many steels and mixed‑condition operations, while chipformer selection should match the specific workpiece material. How does the 0.2 mm corner radius influence finishing? A 0.2 mm radius provides a compromise between strength and finish: it reduces the risk of chipping compared with smaller radii and still allows fine surface quality for final passes when using appropriate feeds and speeds. Is this insert compatible with standard ISO holders? Yes. The ISO designation and the insert’s form, thickness (1.59 mm) and hole style permit use in ISO‑compliant external holders and boring bars provided the holder matches the insert size, tolerance class and fixing method. What is the purpose of the single‑side chipbreaker? The single‑side chipbreaker assists in controlling chip formation during external and internal turning; combining the chipbreaker with the right feed and material selection improves chip evacuation and surface integrity. Can the insert handle interrupted cuts and variable engagement? The SH725 coated carbide is formulated for edge stability under variable engagement conditions, making the insert suitable for applications with intermittent cuts, particularly when clamping and machine rigidity are adequate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a coated carbide SH725 grade and a compact 60° triangular geometry to maintain production stability and predictable tool life; order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. TPGT 070102 SH725 Tungaloy turning insert — ISO triangular insert for external and internal turning The TPGT070102 SH725 Tungaloy insert is an ISO‑standard triangular turning insert designed for external and internal turning where stable cutting edges and reliable chip control are required. ISO triangular insert TPGT 070102 SH725 coated carbide grade for tough edges 60° cutting geometry for stable turning Cylindrical hole with one-sided countersink Consistent performance from a tough, coated carbide grade The SH725 grade is a coated carbide developed for edge stability and reliable performance under varying engagement conditions. Its formulation provides resistance to flank wear and maintains a sharp cutting edge in intermittent and continuous cuts, which results in more consistent component tolerances and fewer unexpected tool changes. For small toolholders or operations with fluctuating depths of cut, this toughness translates into longer tool life and reduced downtime per production run. ISO conformity and straightforward toolholder integration The insert follows ISO norms, enabling predictable fit-up in standard clamping systems. The triangular geometry with a nominal included angle of 60°, a designation of size 07 and a plate thickness of 1.59 mm means the insert aligns with common holder designs; compatibility is determined by form, clearance angle 11°, tolerance class, fastening and thickness. The cylindrical hole with a one-sided countersink (40°–60°) simplifies secure clamping and repeatable seating, so changeover is faster and concentricity is preserved across multiple insert swaps. Controlled chip formation and finishing with a small corner radius A single-sided chipbreaker paired with the 0.2 mm corner radius is suited to fine finishing passes and light interrupted cuts where surface integrity matters. The chipformer geometry reduces the tendency for long stringy chips and helps to route swarf away from the cutting zone, improving operator safety and reducing secondary cleaning. When combined with the SH725 coated carbide, the arrangement supports good surface quality on a wide range of steels and alloyed materials while allowing higher metal removal rates than uncoated grades in comparable conditions. Practical system approach that supports productivity The insert is intended for use as part of a system: an ISO turning insert, an appropriate external holder or boring bar, a shim/clamping set and replacement screws make up the assembly. This system perspective simplifies inventory management and ensures correct seating and torque at every change. The coated carbide composition contributes to cost-efficiency over the insert lifecycle by extending average tool life and reducing frequency of replacements, thereby improving overall machining economics without compromising process stability. For tailored advice on selecting SH725 inserts or to procure Tungaloy turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for prompt, application-specific support and delivery options. Technical data Article number: 6737296 Manufacturer SKU: TUN6737296 Model series: ISO turning inserts Material: Coated carbide Core dimensions Size: 07 Included angle: 60° Corner radius: 0.2 mm Thickness: 1.59 mm Clearance angle: 11° Features & compatibility Triangular plate Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Grade SH725, coated carbide Typical use: external and internal turning Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The SH725 grade insert is a coated carbide insert designed for reliable performance on a broad range of steels and alloyed materials in turning operations. Can the TPGT 070102 be used for internal turning? Yes, the triangular TPGT070102 SH725 insert is suitable for both external and internal turning when mounted in a compatible holder. How does the 0.2 mm corner radius affect finish? A 0.2 mm corner radius helps achieve good surface quality on finishing passes while offering modest edge strength for light interruptions. What does the hole and countersink style mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping and straightforward insert indexing in standard ISO holders. Is the SH725 grade suitable for small toolholders? The SH725 coated carbide grade is specifically noted for edge stability in smaller tools and variable engagement conditions, making it appropriate for compact holder setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH730 Wendeplatten - Tungaloy
The combination of SH730 edge stability, ISO‑standard geometry and a 0.2 mm nose radius ensures predictable chip control and consistent surface finish in small-part turning; order the TPGT070102 SH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 070102 SH730 − Turning insert by Tungaloy, coated carbide, triangular TPGT070102 SH730 is an ISO‑standard triangular coated carbide insert designed for general external and internal turning where reliable edge life and stable chip formation are required. ISO‑standard triangular insert SH730 coated for edge stability 0.2 mm nose radius for fine turning Cylindrical hole with 40°–60° countersink Improved process stability and measurable performance The combination of the SH730 grade and coated carbide substrate provides a balance of toughness and wear resistance that favours stable cutting over varying engagement conditions. In practice, this means fewer unplanned tool changes and a more consistent part finish during serial production. The 0.2 mm nose radius supports fine-profile turning and contributes to a controlled cutting force, reducing vibration on light or compact toolholders. For users seeking efficiency, the result is a reproducible machining window and lower overall process variability. Designed for secure mounting and ISO compatibility Compatibility with a holder is defined by insert shape, relief angle, tolerance class, fastening method, size and thickness. The insert features a triangular form and an 11° relief angle, with a plate thickness of 1.59 mm, making it compatible with standard ISO turn holders sized for 07 inserts. The central cylindrical hole with a single‑side countersink (40°–60°) enables accurate clamping and repeatable seat location, which supports quick index changes and consistent pitch between edges. This geometry reduces setup time and simplifies tool inventory management. Chip control and application guidance for turning A one-sided chipbreaker is integrated to promote regular chip segmentation in common materials. Combined with the toughness of the SH730 grade, this makes the insert particularly suitable for turning operations where intermittent cuts or varying depths of cut occur. For finishing and medium‑feed operations the modest 0.2 mm nose radius produces a fine surface without sacrificing edge strength. The insert is intended for use in external and internal turning; select the chipbreaker and grade combination based on the workpiece material and machining stability for optimal results. Material scope and practical recommendations The coated carbide construction is appropriate for a broad range of steels and mixed materials typically encountered in workshop and production settings. While the SH730 grade excels in applications requiring a durable, edge‑stable insert—especially in smaller tools or where engagement conditions change—users should match cutting data to machine rigidity and clamping. Where maximum wear resistance is needed, adjust speed and feed accordingly; where intermittent cuts or poor support are present, the toughness of the grade helps prevent premature chipping. The insert supports a modular system build-up: insert, compatible external holder or boring bar, clamp/pad and spare screws. For application-specific advice or to source the Tungaloy TPGT070102 SH730 insert, contact Metav Werkzeuge for technical guidance and prompt supply. Technical Data Article number: 6862137 Manufacturer SKU: TUN6862137 Brand: Tungaloy Data Insert designation: TPGT070102 Geometry size: 07 Nose radius: 0.2 mm Relief angle: 11° Plate thickness: 1.59 mm Included hole: with hole, cylindrical + single‑side countersink 40°–60° Approaching angle: 60° Special features Coating / grade: SH730 Material: coated carbide Plate shape: triangular Chipbreaker: one‑sided Series: ISO turning indexable inserts Typical application: external and internal turning FAQ What materials is this insert suitable for? The TPGT070102 SH730 insert is a coated carbide turning insert intended for a wide range of steels and mixed materials; the SH730 grade is chosen for its edge stability in varying engagement conditions. How does the 0.2 mm nose radius affect the finish? A 0.2 mm nose radius on this indexable insert balances profile detail and edge strength to deliver fine surface finishes while maintaining resistance to chipping during small‑radius turning. How is the insert secured in the holder? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°) for precise seating and clamping; compatibility depends on holder form, tolerance class and fastening method. When is SH730 the preferred grade? SH730 is recommended where a tough, edge‑stable coated carbide is required—particularly for smaller tools or processes with intermittent cuts and variable engagement. Can the insert be used for internal turning? Yes, the design and chipbreaker of the TPGT070102 SH730 make it suitable for both external and internal turning, provided the correct holder and cutting data are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH730 grade and a compact triangular ISO insert design for reliable edge stability and consistent chip control; order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. TPGT 070102 SH730 Tungaloy turning insert (ISO triangular, size 07) TPGT070102 SH730 Tungaloy turning insert designed for versatile external and internal turning, combining a compact triangular geometry with a robust, coated carbide grade for stable cutting in variable engagement conditions. Coated carbide grade SH730 Triangular ISO insert size 07 11° clearance, 60° corner angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for improved productivity The combination of a coated carbide cutting edge and a geometry optimised for small-tool applications delivers measurable gains in process stability. The SH730 grade is formulated for edge toughness and wear resistance, which supports prolonged tool life where engagement conditions vary. This results in fewer insert changes and a smoother production flow, while the single-sided chipbreaker helps to maintain reliable chip control under interrupted cuts. The emphasis is on efficiency and repeatability rather than speculative claims. Quick matching and secure clamping to reduce set-up time As an ISO insert, the triangular plate follows standard dimensions and clamping conventions, so compatibility with a suitable holder is determined by form, clearance, tolerance class, fastening and thickness. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures consistent seating and torque distribution when tightened, reducing the risk of misalignment and minimising downtime for re-clamping. Clear specifications for thickness (1.59 mm), corner geometry and relief make holder selection straightforward for production planners and toolroom staff. Practical application range and selection guidance Primarily specified for turning, this triangular insert is suitable for both external and internal operations when paired with an appropriate chipbreaker and holder. The single-sided chipbreaker and the insert’s small corner radius (0.2 mm) favour fine finishing and controlled material removal in confined toolpaths. Selection of the chipbreaker and the SH730 grade should be matched to workpiece material and machining stability to extract the full benefit: longer edge life, consistent surface quality and reduced scrap rates. For complex mixes of workpiece materials or unstable clamping conditions, favour the grade’s edge toughness to maintain process security. Contact Metav Werkzeuge for tailored advice on clamping compatibility, chipbreaker selection and batch availability for the TPGT070102 SH730 Tungaloy turning insert Technical data Article number: 6862187 Manufacturer SKU: TUN6862187 SKU: 6862187-Tungaloy Model series: ISO turning inserts Material: carbide Grade: SH730 Plate designation: TPGT070102 Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Facts Corner radius: 0.2 mm Plate thickness: 1.59 mm Clearance angle: 11° Included corner angle: 60° Plate size: 07 Special features Coated carbide grade SH730 Single-sided chipbreaker ISO‑standard triangular insert Designed for external and internal turning Compatibility dependent on form, relief, tolerance, fastening, size and thickness FAQ Which operations are suitable for this insert? The TPGT070102 SH730 Tungaloy turning insert is intended for external and internal turning; its triangular shape and single-sided chipbreaker make it suitable for controlled material removal and finishing tasks. What does SH730 mean in practical terms? SH730 denotes a coated carbide grade optimised for edge toughness and stable cutting; in practice, the SH730 grade provides wear resistance and reliable edge life under variable engagement conditions. How does the plate secure to the holder? The triangular insert features a cylindrical hole with a 40°–60° one-sided countersink, providing a reproducible seating interface and secure clamping when used with the corresponding ISO clamping system. Which features help achieve consistent surface quality? The combination of a small 0.2 mm corner radius, a single-sided chipbreaker and the SH730 grade supports fine finishing and stable chip formation, contributing to consistent surface quality on turned parts. What should be considered when selecting a chipbreaker for this insert? Selection should be based on workpiece material, depth of cut and machining stability; choose a chipbreaker that matches the intended application to harness the SH730 grade’s edge stability and improve process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable SH730 grade, precise 0.2 mm nose radius and ISO compatibility to keep turning cycles predictable and minimise tool changes; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGT 070102 SH730 Tungaloy turning insert — Coated carbide, 0.2 mm nose radius TPGT 070102 SH730 is an ISO-standard triangular turning insert designed for external and internal turning, offering a single-sided chipbreaker and a secure centre hole for positive location Triangular ISO insert, size 07 SH730 grade, coated carbide 0.2 mm nose radius 11° clearance, 60° included angle Consistent cutting-edge performance in changing conditions The SH730 grade is a coated carbide substrate formulated for tough, edge-stable behaviour, which is especially beneficial in smaller tool setups or where engagement conditions vary. This composition helps to extend the interval between indexings and reduces unplanned stoppages, delivering a more predictable production rhythm. The single-sided chipbreaker provides controlled chip formation that supports stable cutting forces and consistent surface finish, translating technical performance into measurable productivity gains. Secure fit and geometry for precise, repeatable machining Compatibility depends on insert form, clearance, tolerance class, fastening, size and thickness; the ISO designation ensures interchangeability with matching holders. The cylindrical centre hole with single-side countersink (40°–60°) secures the insert position and assists repeatable seating in the pocket. The 11° clearance prevents rubbing on the flank face, while the 60° included angle influences approach geometry and flexibility of cutting directions. These geometry factors together reduce vibration and support a reliable surface quality. System-level benefits and practical application guidance As part of an ISO insert system — comprising the insert, an appropriate external holder or boring bar, a shim/clamp set and replacement screws — the element integrates quickly into existing toolchains. The 0.2 mm nose radius provides a balance between surface finish and edge strength: a small radius refines part finish while maintaining sufficient robustness for intermittent cuts. For turning operations, select a chipbreaker and the SH730 grade matched to the workpiece material and the machine-tool stability to achieve efficient, repeatable results; the insert’s design supports quick replacement and minimal set-up time. Contact Metav Werkzeuge for tailored recommendations on SH730 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6837558 Manufacturer SKU: TUN6837558 SKU: 6837558-Tungaloy Designation: TPGT070102 Material: Coated carbide Grade: SH730 Shape: Triangular Chipbreaker: Single-sided Mounting: With centre hole (cylindrical hole + single-side countersink 40°–60°) Facts Thickness: 1.59 mm Size: 07 Cutting edge radius: 0.2 mm Clearance angle: 11° Included angle: 60° Special features ISO-standard turning insert Suitable for external and internal turning System requires matching holder, shim/clamp and screws Tough, edge-stable grade for varying engagement conditions FAQ Which turning tasks are suitable for this insert? The TPGT 070102 SH730 insert is intended for external and internal turning; its single-sided chipbreaker and SH730 composition favour operations where tool size is small or engagement conditions change. How is compatibility with a holder determined? Compatibility is determined by insert form, clearance, tolerance class, fastening method, size and thickness; the TPGT070102 requires a pocket that accepts a triangular ISO 07 insert with 1.59 mm thickness and centre-hole fixation. What advantages does the SH730 grade offer? The SH730 grade combines a coated carbide substrate with a formulation tuned for toughness and edge stability, giving reliable wear resistance and stable cutting edges under variable loads. Why is the 0.2 mm nose radius important? A 0.2 mm nose radius affects surface finish and edge strength: smaller radii improve fine finishing while maintaining adequate resistance to chipping on interrupted cuts; the TPGT070102 balances those needs for precision turning. Is the insert indexable and part of a system? Yes — the insert is an ISO indexable turning insert designed to be used with matching holders, shims and clamps; rotation to a fresh cutting edge or replacement is part of the standard workflow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade, a precise 0.2 mm nose radius and ISO compatibility for reliable, low-force turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGT 070102 TH10 turning insert (Tungaloy) — triangular 07, 11° relief The TPGT070102 TH10 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a sharp uncoated edge suited to non‑ferrous materials and operations that require low cutting forces. *ISO-standard triangular turning insert *Sharp universal grade TH10 for non-ferrous metals *Triangular 07 size with 11° relief angle *Cylindrical hole with single-side countersink Reduced cutting forces and cleaner surfaces for non-ferrous turning The uncoated carbide TH10 grade is engineered for low cutting resistance, which translates into smoother feeds and improved surface quality when machining non‑ferrous materials. The uncoated cutting edge reduces built‑up edge formation on soft alloys, so the machining process remains predictable and finishes are cleaner. For shops seeking efficient chip control without coating constraints, the grade provides a reliable compromise between sharpness and wear resistance, improving process stability during both roughing and finishing passes. Precise geometry for stable clamping and repeatable results A triangular 07 insert with an included angle of 60°, 11° relief angle and 0.2 mm nose radius offers a balance between strength and accessibility to contours. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping in compatible holders, while the 1.59 mm plate thickness contributes to rigidity under cutting loads. Correct holder selection is determined by form, clearance angle, tolerance class, fastening method, size and thickness; this compatibility reduces vibration and tool change errors, leading to more consistent component tolerances. Practical guidance for selection and application Use the one‑sided chipbreaker and the sharp uncoated edge where low cutting forces and a clean part surface are priorities. The insert is compatible with standard ISO turning systems and is suitable for both external and internal turning operations; choose an appropriate holder or boring bar to match the insert geometry. When machining different alloys, select the chipbreaker and operating parameters according to workpiece material, toolpath rigidity and machine capability to extend tool life and secure cycle‑time gains. If there is uncertainty about the correct setup or cutting data, product specialists can recommend the best combination of holder and parameters. Contact Metav Werkzeuge for application support and availability of the TPGT070102 TH10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery options Technical data Article number: 6862177 SKU: 6862177-Tungaloy Manufacturer SKU: TUN6862177 Designation: TPGT070102 TH10 Material: carbide Application: Turning Core data Included angle: 60° Nose radius: 0.2 mm Relief angle: 11° Thickness: 1.59 mm Insert size: 07 Countersink angle: 40°–60° Features Triangular plate One-sided chipbreaker Uncoated carbide grade TH10 Cylindrical hole with single-side countersink ISO-standard indexable insert Suitable for external and internal turning FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non‑ferrous materials and applications where a sharp edge and low cutting forces produce cleaner surfaces. How does the 0.2 mm nose radius affect machining? A 0.2 mm nose radius provides a good compromise between fine surface finish and edge strength, making the insert suitable for light finishing and controlled material removal. Which holders are compatible with this triangular insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; use an ISO‑compliant holder matched to the triangular 07 geometry for secure clamping. Is the TPGT070102 TH10 suitable for internal turning? Yes, the ISO‑standard geometry and one‑sided chipbreaker make the insert appropriate for both external and internal turning operations when paired with a suitable boring bar. Does the insert come coated? This insert uses an uncoated carbide grade (TH10), chosen to deliver a sharp cutting edge and reduced built‑up edge on softer alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide cutting edge (TH10), a precise 60° triangular geometry with 0.2 mm corner radius, and ISO conformity for reliable turning cycles — ideal for production runs on non-ferrous components. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TPGT070102 TH10 ISO triangular turning insert (60°, 0.2 mm) — Tungaloy TPGT070102 TH10 is an ISO‑conform indexable insert for turning, designed for external and internal operations where a sharp, uncoated carbide edge supports low cutting forces and clean surfaces ISO triangular insert TPGT070102 Sharp uncoated carbide grade TH10 60° geometry with 0.2 mm radius Cylindrical hole + 40°–60° countersink Consistent cut quality with low cutting forces The insert delivers a combination of a sharp uncoated carbide edge and a defined chip control geometry that reduces cutting resistance during turning of non-ferrous materials. The result is a cleaner surface finish and lower feed forces, which helps to maintain tool life and stabilise process windows. The single‑sided chipformer is optimised to evacuate swarf reliably, reducing the risk of surface marks and secondary operations. Easy integration into ISO tool systems Compatibility is determined by insert form, relief angle, tolerance class, fixing method, size and thickness; the insert conforms to ISO specifications for straightforward pairing with standard holders. The 60° triangular form, 11° relief angle and 1.59 mm plate thickness make installation predictable, while the cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and repeatable seating in most ISO holders. Material suitability and application guidance The TH10 uncoated grade is formulated as a universally sharp carbide for non‑ferrous materials and applications where a low cutting force and excellent surface quality are priorities. Typical uses are external and internal turning where swarf is continuous and dimensional control is required. For mixed‑material shops, selecting an appropriate chipbreaker and grade helps balance productivity and finish — the TH10 grade favours clean cuts on aluminium, brass and similar alloys. Economic and process benefits for production Using a repeatable, ISO‑format indexable plate reduces set‑up times and allows for rapid, controlled insert changes during production. The precise 0.2 mm corner radius provides a defined cutting edge for consistent part geometry, while the uncoated carbide chemistry avoids coating build‑up on soft alloys. This combination supports higher productivity through fewer secondary operations and predictable surface results in serial turning tasks. Contact Metav Werkzeuge for tailored application advice and fast supply of Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862148 SKU: 6862148-Tungaloy Manufacturer SKU: TUN6862148 Model series: ISO turning indexable inserts Designation: TPGT070102 TH10 Core specifications Corner radius: 0.2 mm Insert angle: 60° Relief angle: 11° Plate thickness: 1.59 mm Size: 07 Materials & special features Grade: TH10 (uncoated carbide) Cutting material: carbide Plate form: triangular Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning System: ISO insert + appropriate holder, shim/clamp set and spare screws FAQ What materials is the insert suitable for? The TH10 uncoated carbide grade is tailored for non‑ferrous materials such as aluminium and brass and for operations where low cutting forces and clean surfaces are essential. How is compatibility with holders determined? Compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness; the ISO conformity of the TPGT070102 insert simplifies selection of a matching external or boring holder. What chip control does the insert provide? The single‑sided chipbreaker is designed to form and evacuate swarf reliably, supporting continuous turning and reducing the risk of surface damage. Is the insert coated? This insert uses an uncoated carbide cutting edge (TH10), which helps to avoid coating build‑up on softer alloys and to maintain low cutting forces. How does the 0.2 mm corner radius affect performance? A defined 0.2 mm corner radius provides stable cutting geometry for repeatable part dimensions and improved surface finish, while balancing strength at the cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH7025 Wendeplatten - Tungaloy
Take advantage of the SH7025 coated carbide grade and the ISO-compliant triangular geometry for consistent edge stability and reliable chip control; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. TPGT 070104 SH7025 turning indexable insert by Tungaloy — coated carbide, 60° triangle A TPGT070104 SH7025 triangular indexable insert designed for ISO-compliant external and internal turning, offering a compact geometry and single-sided chipbreaker for controlled swarf management TPGT 070104 triangle insert, 60° geometry Coated carbide SH7025 for stable edges Single-sided chipbreaker for reliable chip control Central hole with countersink for secure clamping Engineered for stable cutting and predictable tool life The insert employs the SH7025 coated carbide grade, developed for edge stability under changing entry conditions; this means fewer unexpected edge failures and more predictable wear behaviour. Where smaller toolholders or variable engagement angles are used, the combination of the grade and the single-sided chipbreaker helps maintain a consistent cutting edge, reducing downtime and scrap rates. The effect is a more efficient turning process with improved productivity and lower tool consumption over comparable uncoated or poorly matched grades. Secure clamping and ISO compatibility reduce setup uncertainty ISO standardisation ensures straightforward selection for compatible holders: the geometry, 11° clearance, tolerance class, fastening type, size and 1.59 mm thickness determine fit and performance. The triangular form with a 60° included angle and a 0.4 mm nose radius gives a balance between edge strength and finish capability. The insert is supplied with a cylindrical hole and a single-sided 40°–60° countersink, enabling positive locating and secure clamping that lowers the risk of micro-movements during turning, which in turn supports improved surface finish and repeatable results. Practical selection guidance for varied turning tasks For general turning tasks, select the chipbreaker and the SH7025 grade to match workpiece conditions and machine stability; the chipformer should suit the material and the intended feed and depth of cut. The insert’s modest thickness and compact triangle size make it particularly suitable for applications where smaller toolholders are preferred or where entry conditions change frequently. In practice, this leads to easier indexation, predictable performance in short-cycle operations and cost-effective stock removal when the right combination of holder and insert geometry is chosen. For reliable turning results with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967568 SKU: 6967568-Tungaloy Manufacturer SKU: TUN6967568 Manufacturer: Tungaloy Facts Included angle: 60° Nose radius: 0.4 mm Clearance angle: 11° Thickness: 1.59 mm Size designation: 07 Special features Triangular plate form Coated carbide grade SH7025 Single-sided chipbreaker Cylindrical central hole + one-sided countersink (40°–60°) ISO-compliant indexable insert for turning FAQ What is the main benefit of the SH7025 coating? The SH7025 coating on this indexable insert provides improved edge stability and wear resistance, which helps the insert deliver predictable tool life under varying entry conditions. Which holder features are required for correct use of this insert? A compatible holder must match the insert’s form, clearance angle (11°), tolerance class, fastening method and size; the central hole and countersink ensure secure clamping when the holder accepts ISO triangular inserts. Is this insert suitable for internal turning as well as external turning? Yes, the ISO triangular geometry and compact thickness make the insert suitable for both external and internal turning operations when used with an appropriate holder. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius balances edge strength with the ability to produce a good surface finish; smaller radii reduce cutting forces while maintaining acceptable durability for many turning tasks. Are replacements or spare screws included with the insert? The item is an ISO-compliant insert and is supplied as the cutting plate itself; suitable clamping sets, screws and underlays should be selected separately to match the holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH7025 Wendeplatten - Tungaloy
Combine the SH7025 grade's edge stability with the ISO triangular geometry and a compact 0.4 mm corner radius for productive, repeatable turning. Order the insert directly via Metav Werkzeuge or ask the consultants for specific holder compatibility and cutting recommendations. TPGT 070104 SH7025 ISO triangular turning insert, 60° – Tungaloy TPGT070104 SH7025 is a triangular ISO turning insert designed for general turning applications where edge stability and secure clamping are required. SH7025 coated carbide for edge stability 60° triangular geometry for versatile turning 0.4 mm corner radius for accurate form control With cylindrical hole and single-side countersink 1.59 mm thickness for secure clamping Longer tool life through stable cutting performance The SH7025 grade is a coated carbide designed for tough, edge-stable performance during turning, especially useful with smaller tools or when engagement conditions vary. The result is reduced flank wear and more consistent chip formation, which lowers the frequency of index changes and supports uninterrupted production. The single-sided chipbreaker helps control chips in typical turning scenarios, improving process reliability and reducing manual chip handling. For workshops seeking measurable uptime improvements, this geometry and grade combination delivers dependable performance with a favourable cost-to-life ratio. ISO conformity for straightforward tool selection and replacement Constructed to the ISO series for turning plates, the insert is ISO-compliant, so compatibility with external holders depends on shape, clearance angle, tolerance class, attachment method, size and thickness. The standardised form simplifies sourcing replacements and reduces setup time: matching the triangular form and the 1.59 mm plate thickness ensures the insert seats correctly and secures with the prescribed clamp or screw. Clear specification of these parameters allows production planners and toolroom technicians to predict fitment reliably and maintain consistent clamping behaviour across tool changes. Precision geometry for accurate workpiece results The triangular geometry with a 60° included angle and a 0.4 mm corner radius supports reproducible edge contact and defined cutting line transitions. The relief angle 11° reduces rubbing at entry, while the modest corner radius balances strength and detail on profiles, helping to maintain dimensional tolerances and surface finish. The provision of a cylindrical hole with a one-sided countersink (40°–60°) ensures stable mechanical fastening and repeatable positioning in compatible toolholders. Together, these features translate into predictable part quality and fewer adjustments at the machine. Practical handling and application guidance for efficient turning The triangular insert is supplied as part of the ISO turning system and integrates with a matching external holder or boring bar, support shim and clamping set. Selecting the appropriate chipbreaker and the SH7025 grade according to workpiece conditions—such as interrupted cuts, variable depth of cut or small tool overhang—optimises chip flow and tool life. For advice on holder compatibility, effective cutting parameters or to request detailed technical data, Metav Werkzeuge provides prompt consultancy to align the insert choice with machining goals and operational constraints. For reliable turning performance based on Tungaloy’s SH7025 grade, contact Metav Werkzeuge for tailored application advice and immediate supply. Technical data Article number: 6967560 Manufacturer SKU: TUN6967560 Supplier SKU: 6967560-Tungaloy Manufacturer: Tungaloy Facts ISO designation: TPGT070104 Plate size: 07 Included angle: 60° Corner radius: 0.4 mm Plate thickness: 1.59 mm Relief angle: 11° Special features Coated carbide grade SH7025 Triangular plate form Single-sided chipbreaker With cylindrical hole and one-sided countersink (40°–60°) ISO turning insert series FAQ What holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, attachment, size and thickness; the TPGT070104 insert fits holders specified for triangular ISO inserts with matching seat and clamping geometry. What does the SH7025 grade offer compared with standard grades? The SH7025 grade is a coated carbide formulated for enhanced edge stability and toughness, giving the insert improved resistance to edge chipping in variable engagement and smaller-tool applications. Is the chipbreaker suitable for general turning tasks? The single-sided chipbreaker on this triangular insert supports controlled chip formation in common turning operations, improving process stability for a wide range of duties. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius balances profile accuracy and cutting edge strength, helping to maintain dimensional repeatability while reducing the risk of corner chipping on interrupted cuts. Are cutting data and holder recommendations available? Yes; Metav Werkzeuge can provide cutting parameters and holder matching guidance for the TPGT070104 insert to suit specific machines and applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH7025 Wendeplatten - Tungaloy
Combining the SH7025 coated-carbide grade with a compact 0.4 mm corner radius and ISO compatibility, this insert delivers consistent edge stability and versatile mounting for both external and internal turning. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. TPGT070104 SH7025 Tungaloy turning insert (ISO 070104) for turning The TPGT070104 SH7025 is an ISO-standard triangular indexable insert designed for external and internal turning, offering robust edge stability for small tools and variable engagement conditions. Coated carbide grade SH7025 for edge stability Triangle insert with 60° included angle 11° relief angle for flexible engagement Cylindrical hole with 40°–60° countersink Productive turning with consistent edge life The combination of a coated carbide substrate and the SH7025 grade provides a balance between toughness and wear resistance, making this triangular insert a reliable choice in variable machining conditions. The geometry is optimised to maintain a stable cutting edge even when engagement depth changes, which reduces the need for frequent index changes and supports continuous production runs. With a 0.4 mm corner radius the insert gives controlled chip formation and a good compromise between strength and fine detail in the turned profile. Secure clamping and ISO compatibility for fast changeovers Designed as an ISO-standard insert, the component fits established holders when form, relief, tolerance class, fastening method, size and thickness are matched. The cylindrical hole with single-side countersink (40°–60°) ensures repeatable seating and reliable clamping, minimising chatter and improving surface finish. The 1.59 mm thickness contributes to stability on the seat while keeping cutting forces manageable, helping to achieve predictable results with standard toolholders. Flexible application where stability matters This indexable insert is intended primarily for turning operations and is particularly suitable where smaller tools are used or where cutting engagement varies frequently. The single-sided chipbreaker helps control chips for a range of depths of cut, supporting safer, cleaner machining. As an ISO-format triangular insert it allows quick toolset changes and straightforward inventory management for workshops running mixed turning operations. Practical advantages for workshop efficiency Using this insert reduces downtime related to tool handling and adjustment thanks to its standardised form and repeatable seating geometry. The 11° relief angle reduces rubbing on the flank without compromising strength, while the 60° included angle of the triangle provides versatile cutting positions. For manufacturers seeking a pragmatic balance between robust performance and straightforward handling, this design supports predictable tool life and easier process planning. Contact Metav Werkzeuge for tailored recommendations on Tungaloy SH7025 inserts and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6967570 SKU: 6967570-Tungaloy Manufacturer SKU: TUN6967570 Model series: ISO turning inserts Designation: TPGT070104 SH7025 Material: Carbide Facts Corner radius: 0.4 mm Thickness: 1.59 mm Included angle: 60° Relief angle: 11° Size: 07 Special features Triangle insert (three cutting edges) Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Coated carbide grade SH7025 ISO-standard indexable insert for external and internal turning FAQ Which applications is this insert designed for? The TPGT070104 SH7025 insert is designed for turning operations, offering particular benefits when tool engagement varies or where smaller tools are in use. How does the SH7025 grade affect performance? The SH7025 coating provides a combination of toughness and edge stability, which helps the insert maintain a reliable cutting edge under varying engagement conditions. What does the hole and countersink design provide? The cylindrical hole with a single-side countersink (40°–60°) facilitates repeatable seating and secure clamping, improving stability and surface finish when the insert is mounted in an appropriate holder. Can the insert be used in standard ISO holders? Yes, the insert follows ISO geometry; compatibility depends on matching form, relief, tolerance class, fastening, size and thickness with the chosen holder. How many cutting edges are available per insert? As a triangular insert, the TPGT070104 offers three indexed cutting edges, allowing economical reindexing during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade for durable cutting-edge stability and the ISO-standard triangular 60° geometry for straightforward integration into existing turning toolsets. The compact 0.4 mm corner radius and 11° relief angle enable precise profile control while maintaining robustness. Order the TPGT070104 SH725 insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 070104 SH725 Tungaloy — Indexable turning insert, coated carbide, 60° The TPGT070104 SH725 is an ISO-standard triangular indexable insert engineered for external and internal turning, offering secure clamping via a cylindrical hole with single-side countersink. SH725 coated carbide for tough cutting conditions ISO triangular insert with 60° cutting angle 0.4 mm corner radius for accurate profile control Cylindrical hole with single-side countersink 11° relief angle and 1.59 mm plate thickness Faster, more reliable metal removal with a tough cutting grade The combination of a coated carbide substrate and the SH725 cutting grade delivers a balance of toughness and wear resistance that supports consistent material removal under variable engagement conditions. The insert’s geometry — a 60° triangle with a 0.4 mm corner radius — increases edge strength while enabling accurate profile replication; the relatively small radius reduces vibration and helps maintain surface finish when using compact tool overhangs. Where rapid stock removal is required, the grade’s edge stability reduces the frequency of index changes, supporting higher overall machining efficiency without compromising component quality. Simple integration into ISO tooling systems for predictable setup Designed as an ISO-conforming plate, the insert fits standard triangular holders and boring bars when the holder’s form, relief angle, tolerance class, fastening method, size and thickness match the insert specifications. The cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and repeatable seating, while the 1.59 mm plate thickness ensures consistent support under axial and radial loads. The system approach — insert, appropriate outer holder or boring bar, backing shim/clamp set and replacement screws — enables quick changeovers and predictable repeatability across batch runs, reducing downtime associated with tool changes and setup. Controlled chip formation and surface quality in turning operations The one-sided chipbreaker geometry promotes reliable chip control in a variety of turning tasks, contributing to uninterrupted machining and safer chip evacuation. Coating on the SH725 carbide reduces friction and improves thermal resistance at the cutting zone, which in turn helps prolong flank life and stabilise cutting-edge condition. For external and internal turning where surface integrity matters, the insert’s combination of 11° relief angle and optimised edge form helps maintain consistent surface finish while offering the robustness needed for interrupted cuts or changing cut depths. The result is a practical compromise between production throughput and component quality. Contact Metav Werkzeuge for application-specific recommendations on the TPGT070104 SH725 insert and to confirm holder compatibility or stock availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737304 Manufacturer SKU: TUN6737304 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Manufacturer: Tungaloy Facts Cutting angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 1.59 mm Plate size: 07 Special features Triangular plate form Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Coated carbide grade SH725 Suitable for external and internal turning; ISO-standard compatibility FAQ What turning tasks is this insert best suited for? The TPGT070104 SH725 insert is intended for external and internal turning, providing reliable edge stability for a range of general turning operations. How is the insert secured in the toolholder? Mounting relies on the cylindrical hole with a single-side countersink; the insert seats against the clamp or shim in a standard ISO triangular holder to achieve repeatable fastening. Which geometry values define the cutting behaviour? Key values are the 60° cutting angle, 11° relief angle, 0.4 mm corner radius and 1.59 mm plate thickness, which together influence strength, finish and chip formation for the insert. What advantages does the SH725 grade provide? The SH725 grade offers a tough, edge-stable performance especially suited to smaller tools or varying engagement conditions, improving resistance to chipping while maintaining productive cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of reliable coated carbide performance, precise geometry and straightforward holder compatibility to maintain productive turning operations; order the insert via Metav Werkzeuge or ask our consultants for application advice. TPGT 070104 SH725 triangular indexable turning insert by Tungaloy — 60° geometry, 0.4 mm corner radius The TPGT070104 SH725 is an ISO triangular indexable insert designed for general external and internal turning, offering a balance of edge stability and adaptable cutting conditions for small tools and changing engagements. Triangle insert, 60° geometry Coated carbide grade SH725 0.4 mm corner radius, precision ground Cylindrical hole with 40°–60° countersink Consistent productivity from a wear-resistant grade The insert delivers consistent cutting performance through its coated carbide construction and the SH725 grade, which is formulated for toughness and stable edge behaviour. This yields longer effective tool life when machining under variable engagement conditions, reducing downtime for insert changes and supporting predictable cycle times. As a result, production planners can rely on steadier throughput and fewer unexpected interruptions. The combination of a robust substrate and modern coating technology improves resistance to chipping without sacrificing cutting-edge sharpness. Secure clamping, repeatable positioning and precise geometry Compatibility with a holder is determined by form, clearance angle, tolerance class, attachment method, size and thickness; the triangular shape with a standard 60° included angle and 11° relief ensures secure seating in most ISO-type turning holders. The insert features a cylindrical hole with a single-sided countersink (40°–60°), designed to work with common clamping systems and to provide repeatable location. Precise dimensions — including 1.59 mm thickness and a 0.4 mm corner radius — contribute to stable cutting behaviour and reproducible part quality, making the component suitable for setups where consistency and interchangeability are required. Application guidance and material suitability Designed specifically for turning, the grade and single-sided chipbreaker make this insert appropriate for a wide range of steels and mixed operational demands; select the chipbreaker and grade according to workpiece material, cutting mode and machine stability to optimise chip control and surface finish. The one-sided chipbreaker supports controlled chip formation for typical finishing and medium turning tasks, while the coated substrate helps manage abrasive wear. When machining variable batches or small tools with inconsistent engagement, this insert offers a pragmatic compromise of durability and edge integrity, enabling technicians to focus on process stability and component tolerances. For tailored advice on integrating the Tungaloy SH725 insert into existing toolholders or to request compatibility checks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737298 Manufacturer SKU: TUN6737298 SKU: 6737298-Tungaloy Model series: ISO indexable turning inserts Designation: TPGT070104 SH725 Facts Corner radius: 0.4 mm Thickness: 1.59 mm Size: 07 Included angle: 60° Relief angle: 11° Special features Material: carbide Coating/grade: SH725 Plate form: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided FAQ What cutting tasks is this insert best suited for? The TPGT070104 SH725 by Tungaloy is intended for external and internal turning where edge stability and adaptability to changing engagement are required, especially in small-tool or varying-cut conditions. Which materials can be machined with this grade? The SH725 grade is a tough, coated carbide designed for a broad material range; select the appropriate chipbreaker and cutting data for steels and mixed workpiece materials to achieve optimal tool life. How does the cylindrical hole with countersink affect clamping? The cylindrical hole with a 40°–60° one-sided countersink provides secure, repeatable seating in common ISO-style clamping systems and supports accurate location of the triangular insert. Is the 0.4 mm corner radius suitable for finishing passes? Yes, the 0.4 mm corner radius balances edge strength with the ability to produce good surface finish in finishing and light to medium turning operations using correct feeds and speeds. Can the insert be used in interrupted cuts? The SH725 grade offers good edge stability for variable engagement, so the insert can be used in interrupted cutting, provided machine rigidity and holder choice match the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH725 Wendeplatten - Tungaloy
Benefit from the combination of stable cutting-edge performance and reliable chip control delivered by the SH725 grade; cost-effective operation and straightforward insert replacement support uninterrupted turning cycles — order directly via Metav Werkzeuge or consult our specialists if required. TPGT070104 SH725 Tungaloy turning insert The TPGT070104 SH725 Tungaloy is an ISO‑standard triangular turning insert designed for external and internal turning, providing robust edge stability and controlled chip formation for a wide range of machining conditions. ISO‑standard triangular geometry SH725 coated carbide grade 11° clearance angle for broad versatility Cylindrical hole with countersink Consistent cutting performance for demanding turning tasks The SH725 grade is a coated carbide substrate developed for tough, edge‑stable performance in turning operations. Its single‑sided chip control geometry reduces the risk of snarled chips and supports stable metal removal, particularly where engagement conditions change frequently. The triangular form and 60° cutting angle enable versatile corner use, while the 0.4 mm corner radius balances strength and finish. This combination yields predictable tool behaviour across short‑run and production environments, reducing setup interruptions and contributing to stable process capability. Simple integration and secure clamping in standard holders Compatibility with holder systems is defined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert features a cylindrical hole with single‑side countersink (40°–60°), which ensures repeatable seating and straightforward clamping in compatible external holders or boring bars. A plate thickness of 1.59 mm and 11° clearance angle mean the insert sits correctly in ISO‑defined pockets; tolerance conformity simplifies tool changeovers and reduces fixturing uncertainty, supporting quicker changeover times and consistent part quality. Application scope and operational benefits for turning Intended for both external and internal turning, this indexable insert offers a pragmatic balance between edge robustness and machinability. The SH725 composition is particularly suited to smaller tools and variable cut conditions where a tough edge is required. For practical operation, selecting the correct chipbreaker and grade relative to material and machining stability is essential; this insert’s one‑sided chipbreaker provides improved evacuation in many common turning scenarios. The result is longer effective edge life and lower tooling expenditure per finished part. Practical considerations and maintenance recommendations To achieve the best service life, match the insert grade and chipbreaker to the workpiece material and cutting parameters. The ISO‑standard designation simplifies stockkeeping and replacement logistics: spare inserts and clamping kits can be held for rapid swaps. Regular inspection of the clamping screw and seat condition helps maintain the insert’s repeatable position and preserves the expected surface finish and dimensional consistency. Where occasional heavier cuts are required, the insert’s geometry and coated carbide substrate support short bursts of higher load without immediate edge failure. Contact Metav Werkzeuge for tailored cutting recommendations or to request a quote for the TPGT070104 SH725; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737297 Manufacturer SKU: TUN6737297 Label: TPGT070104 SH725 Tungaloy Model series: ISO‑Drehwendeschneidplatten Core specifications Cutting angle: 60° Clearance angle: 11° Plate thickness: 1.59 mm Corner radius: 0.4 mm Size: 07 Materials & features Grade/coating: SH725 Substrate: coated carbide Chipbreaker: one‑sided Mounting: cylindrical hole with single‑side countersink (40°–60°) Shape: triangular Typical application: turning (external and internal) FAQ What holder types are compatible with this insert? Compatibility depends on holder geometry; the TPGT070104 SH725 insert fits holders accepting ISO triangular inserts with a cylindrical hole and single‑side countersink, ensuring correct seating and clamping. Which workpiece materials suit the SH725 grade best? The SH725 grade is a tough, edge‑stable coated carbide designed for general turning; it is particularly effective where small tools or variable engagement conditions demand robust cutting edges. How does the one‑sided chipbreaker affect machining? A one‑sided chipbreaker on this insert improves chip control on the designated cutting side, promoting safer chip evacuation and more consistent surface finish during turning. What does the 11° clearance angle mean in practice? The 11° clearance angle provides a balance between strength and clearance for the cutting edge, reducing rubbing and heat while maintaining rigidity for common turning operations. How is the insert identified and ordered? Order using the ISO designation TPGT070104 SH725 and manufacturer article number 6737297; the SKU TUN6737297 can be used for internal stock and supplier references. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH730 Wendeplatten - Tungaloy
TPGT 070104 SH730 Drehwendeschneidplatte von Tungaloy Die TPGT 070104 SH730 Drehwendeschneidplatte wurde für effizientes Drehen entwickelt und überzeugt bei wechselnden Eingriffsbedingungen durch schneidkantenstabile Beschichtung und präzise ISO-Kompatibilität ISO-genormt für einfache Aufnahme im Halter Beschichtung SH730 für schneidkantenstabilität Hartmetall: hohe Standzeit bei Drehen Eckenradius 0,4 mm für feine Oberflächen Mit Loch und Senkung für sichere Befestigung Höhere Produktivität durch stabile Schneidkante und Wirtschaftlichkeit Die TPGT070104 Wendeplatte kombiniert beschichtetes Hartmetall mit der Sorte SH730, was eine besonders stabile Schneidkante und gleichbleibende Standzeiten bei wechselnden Schnittbedingungen ermöglicht. Für Anwender bedeutet das weniger Werkzeugwechsel, kürzere Rüstzeiten und eine messbare Steigerung der Produktionsleistung. Diese technische Auslegung reduziert Stillstandzeiten und senkt die Fertigungskosten pro Bauteil. Passgenaue Aufnahme und sichere Befestigung für zuverlässige Prozesse Dank ISO-Genormung, dreieckiger Plattenform und der Ausführung mit Loch inklusive zylindrischer Aufnahme und einseitiger Senkung (40°–60°) lässt sich die Platte schnell und zuverlässig im Außenhalter oder in der Bohrstange positionieren. Der angegebenen Freiwinkel 11° und die Plattendicke von 1,59 mm sorgen für konstante Eingriffsgeometrien. Das Ergebnis ist reproduzierbare Bearbeitung mit reduzierten Ausschussraten und vereinfachter Prozesskontrolle. Materialeigenschaft und Anwendungsvorteile kurz erklärt Das verwendete Hartmetall in Kombination mit der SH730-Beschichtung bietet beste Voraussetzungen für zähe, schneidkantenstabile Anwendungen, besonders bei kleineren Werkzeugen oder variierenden Eingriffsbedingungen. Der Eckenradius 0,4 mm unterstützt die Erzielung guter Oberflächengüten und eignet sich für feine Gestaltungslinien beim Außen- und Innendrehen. Anwender profitieren von optimierter Spanbildung und einem robusten Verhalten bei wechselnder Schnittbelastung. Empfehlung: Die TPGT 070104 SH730 von Tungaloy als Standardlösung für produktive Drehprozesse wählen und über Metav Werkzeuge anfragen; bei technischen Rückfragen steht die Beratung per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 6837559 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: TPGT070104 SH730 Fakten Radius: 0,4 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 1,59 mm Plattengröße: 07 Eckenradius: 0,4 mm Besonderheiten Material: Hartmetall Sorte/Beschichtung: SH730 Schneidstofftyp: beschichtetes Hartmetall Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Drehen Typische Anwendung: Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die TPGT 070104 SH730 von Tungaloy ist für ein breites Werkstoffspektrum ausgelegt; die beschichtete Hartmetallsorte SH730 bietet gute Standzeiten bei zähen Werkstoffen und wechselnden Eingriffsbedingungen. Welche Vorteile bietet die SH730-Beschichtung gegenüber unbeschichteten Platten? Die SH730-Beschichtung verbessert die Schneidkantenstabilität und verschleißfestigkeit, wodurch die TPGT 070104 SH730 längere Lebensdauer und konstantere Ergebnisse im Fertigungsprozess liefert. Ist die Platte mit Standardaußenhaltern kompatibel? Ja, die ISO-Genormung der TPGT 070104 gewährleistet Kompatibilität zu gängigen Außenhaltern; Form, Freiwinkel, Toleranzklasse und Befestigungsart sind entscheidend für die korrekte Aufnahme. Welche Rolle spielt der Eckenradius 0,4 mm in der Praxis? Der Eckenradius 0,4 mm unterstützt eine feine Oberflächengüte und reduziert Schneidkantenbelastungen, was insbesondere bei präzisen Außen- und Innendrehoperationen von Vorteil ist. Welche Befestigungsoptionen bietet die Platte? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was eine sichere und reproduzierbare Befestigung am Halter ermöglicht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT 070104 SH730 Wendeplatten - Tungaloy
Take advantage of a robust, coated carbide insert that combines reliable edge stability with ISO compatibility for consistent turning performance; select the SH730 grade for tougher, variable engagement conditions and order directly via Metav Werkzeuge or consult the team for application-specific advice. TPGT 070104 SH730 Tungaloy – ISO triangular turning insert, coated carbide, 11° relief TPGT070104 SH730 is an ISO‑standard triangular indexable insert for general turning applications, designed for stable edge performance in changing cut conditions. ISO triangular insert, size 07 Coated carbide grade SH730 11° relief angle, 0.4 mm radius Cylindrical hole with 40°–60° countersink High‑performance turning with consistent component quality The combination of a coated carbide substrate and the SH730 grade delivers predictable cutting behaviour under varied engagement conditions. The insert’s 11° relief angle reduces rubbing and heat generation at the cutting edge, which helps to prolong tool life and maintain surface finish. For workshop planners this means fewer insert changes and steadier cycle times; the geometry supports both outer and inner turning operations when paired with the correct ISO holder. A brief explanation: a relief angle is the clearance behind the cutting edge that prevents unwanted contact with the workpiece, improving cutting efficiency and reducing thermal loads. Durable substrate and chip control for demanding conditions Manufactured from carbide, this triangular insert benefits from a robust substrate suited to interrupted cuts and variable feeds. The one‑sided chipbreaker promotes controlled chip formation, aiding evacuation and reducing the risk of built‑up edge in many steels and alloy materials. The modest 0.4 mm corner radius balances edge strength with the ability to produce fine radiused profiles; a smaller radius often improves surface finish but reduces shock resistance, which is why SH730’s toughness is advantageous for smaller tools or fluctuating engagement. In plain terms: the grade is chosen to resist chipping while keeping a reliable cutting edge. Workshop compatibility and straightforward handling The insert conforms to ISO dimensions and is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure secure clamping in compatible toolholders. The 1.59 mm thickness and size 07 designation correspond to widely adopted holders, simplifying stock management for production or maintenance departments. For those specifying tools, note the article and manufacturer SKUs to check holder fit: the insert is referenced under the manufacturer’s article number and the supplier SKU for accurate ordering. If uncertain about holder compatibility or recommended cutting data, technical teams can provide machining parameters to match material and cycle requirements. Practical benefit in process planning Selecting an ISO‑standard insert such as this one reduces qualification time when switching suppliers or standardising tool stores, because a common shape, hole style and tolerance class allow for interchangeability. The coated carbide SH730 reduces downtime caused by edge failure and supports productive turning in batch or single‑part production. For procurement and process engineers, the key advantage is reliable repeatability: consistent insert geometry leads to steady part quality and predictable tool consumption. Contact Metav Werkzeuge for selection advice and to request cutting data or an order reference for TUN6862188; consultants are available to assist with holder compatibility and machining recommendations Technical data Article number: 6862188 SKU: 6862188-Tungaloy Manufacturer SKU: TUN6862188 Model series: ISO turning indexable inserts Designation: TPGT070104 SH730 Core specifications Insert size: 07 Thickness: 1.59 mm Corner radius: 0.4 mm Relief angle: 11° Point angle: 60° Hole: with hole Features & materials Material: carbide Coating / grade: SH730 Chipbreaker: one-sided Insert shape: triangular Application: turning Hole style: cylindrical hole + one-sided countersink (40°–60°) FAQ What materials can this insert handle? The TPGT070104 SH730 insert is a coated carbide grade engineered for a broad range of turning tasks; the SH730 sort is particularly suited to situations requiring edge toughness, making it appropriate for many steels and mixed engagement conditions. How does the 0.4 mm corner radius affect part finish? A 0.4 mm corner radius provides a compromise between edge strength and surface quality; it helps to produce a consistent radiused profile while offering improved resistance to chipping compared with very small radii when using the SH730 grade. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions and features a cylindrical hole with a countersink, which allows secure clamping in compatible ISO toolholders; confirm holder form, clearance angle and tolerance class to ensure perfect fit. How should the one‑sided chipbreaker be used? The one‑sided chipbreaker aids controlled chip formation for turning operations; select feed and depth of cut to match the chipformer design and material to achieve effective evacuation and to avoid chip entanglement. What are the ordering references for stock management? Use the manufacturer article number 6862188 and the supplier SKU 6862188-Tungaloy or Manufacturer SKU TUN6862188 when placing orders to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a coated cemented carbide SH730 grade, a precise 0.4 mm corner radius and ISO conformity for reliable turning results; Order the TPGT070104 SH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed TPGT 070104 SH730 Tungaloy triangular turning insert — ISO triangular insert, 60° A TPGT070104 SH730 triangular indexable insert designed for ISO-standard external and internal turning applications, offering a robust coated carbide grade for variable engagement conditions ISO-compliant triangular insert Coated cemented carbide SH730 0.4 mm corner radius for precision With cylindrical hole and countersink 40°–60° Increased process reliability through tougher cutting edges The coated cemented carbide SH730 is formulated for toughness and stable cutting-edge performance, which reduces edge chipping under interrupted cuts and variable engagement. This toughness translates into fewer unscheduled tool changes and more predictable cycle times, improving overall process reliability. The single-sided chipbreaker geometry helps control swarf formation during external and internal turning, so the workshop benefits from cleaner chips and reduced downtime. Consistent surface finish and dimensional control from precise geometry A triangular insert with a 60° corner angle and 0.4 mm corner radius gives a predictable cutting profile for finishing and light to medium turning tasks. The 11° relief angle supports effective clearance while maintaining cutting strength, and the modest 1.59 mm plate thickness provides the stiffness required for stable cuts in small-tool setups. These geometric parameters help achieve consistent surface quality and repeatable tolerances, particularly when paired with an appropriate clamping system and ISO-compatible holders. Simple system integration for efficient workshop operation As a member of the ISO turning insert family, this indexable solution fits into standard toolholder systems when matching form, relief angle, tolerance class, clamping style, size and thickness. The insert’s hole arrangement — a cylindrical hole with a one-sided countersink (40°–60°) — supports secure fixing and fast replacement, aiding inventory standardisation and reducing set-up times. Choosing ISO-standard components streamlines procurement and supports predictable tool-change procedures on the shop floor. Practical advantages in everyday turning tasks The robust grade is particularly suitable for smaller tools or operations where engagement conditions change frequently; the combination of a tough substrate and a dedicated coating improves resistance to flank and crater wear while the single-sided chipformer aids chip control in mixed materials. For applications requiring repeatable indexation, the triangular shape allows multiple cutting edges per insert, offering economical edge usage and lower per-cutting-edge costs. Contact Metav Werkzeuge for application advice and to procure original Tungaloy indexable inserts — Metav Werkzeuge can advise on toolholder compatibility and delivery options Technical Data Article number: 6862173 SKU: 6862173-Tungaloy Manufacturer SKU: TUN6862173 Manufacturer article number: 6862173 Facts Corner radius: 0.4 mm Plate thickness: 1.59 mm Insert size: 07 Corner angle: 60° Relief angle: 11° Special features Coating / grade: SH730 Substrate: coated cemented carbide Plate shape: triangular With hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Series: ISO turning inserts FAQ What turning tasks is this insert designed for? The TPGT070104 SH730 Tungaloy indexable insert is intended for ISO-standard external and internal turning operations, particularly where engagement conditions vary or smaller tool sizes are used. How does the SH730 grade affect tool life? The SH730 coating and substrate combination enhances toughness and cutting-edge stability, which reduces edge chipping and extends usable life compared with uncoated grades under similar conditions. Which holder characteristics determine compatibility with this insert? Compatibility depends on the holder’s form, relief angle, tolerance class, clamping method, size and thickness; matching these to the insert’s ISO designation ensures correct fit and secure clamping. Can this insert be indexed to use multiple cutting edges? Yes, the triangular geometry allows indexation to multiple cutting edges, improving economy per edge and supporting efficient edge changeover. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with a one-sided countersink (40°–60°) provides positive and repeatable clamping in the holder, facilitating secure fixing and quick replacement during tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of reliable cutting performance, precise geometry and simple indexability to maintain consistent production quality. The uncoated TH10 carbide grade reduces cutting forces and delivers clean surface finishes in non‑ferrous turning, while the ISO form and secure hole design ensure repeatable clamping. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. TPGT 070104 TH10 indexable turning insert by Tungaloy — triangular ISO insert, 60° included angle The TPGT 070104 TH10 is an ISO‑standard triangular indexable insert designed for external and internal turning applications where low cutting forces and clean surface finishes are required. ISO-standard triangular insert, 60° included angle Uncoated TH10 cemented carbide grade 0.4 mm corner radius with 11° relief Cylindrical hole with one-sided countersink High productivity through lower cutting forces The combination of an uncoated carbide edge and the TH10 universal grade results in markedly lower cutting forces, which is particularly advantageous when machining non‑ferrous alloys and delicate components. A reduced force requirement leads to steadier cutting conditions, less vibration and a clean surface finish that shortens downstream processing. Because the grade is uncoated, the cutting edge remains sharp and supports operations where minimal edge buildup and consistent friction behaviour are essential. Consistent accuracy from designed geometry A triangular form with a 60° included angle and a 0.4 mm corner radius delivers geometrical stability for repeated indexings. The 11° relief angle reduces rubbing on the flank and helps maintain dimensional accuracy over multiple indexings. The insert’s modest 1.59 mm thickness contributes to a compact seat height while still providing sufficient edge strength for common turning tasks. Together, these characteristics support predictable tool life and repeatable part quality in batch production. Improved chip control and application flexibility The single‑sided chipbreaker has been designed to guide chips away from the cut in typical turning operations, improving process reliability and surface integrity. The insert is suitable for a wide range of turning set‑ups when matched with an appropriate holder and clamping system; selection of the chipbreaker and grade should be aligned with the workpiece material, depth of cut and machine stability. The result is efficient swarf evacuation, reduced risk of re‑cutting chips and stable cycle times. Straightforward integration into ISO tooling systems Compatibility with a toolholder is governed by the insert’s form, relief angle, tolerance class, fastening type, size and thickness. The cylindrical hole with a one‑sided countersink (40°–60°) enables secure, repeatable clamping in standard ISO seats and helps maintain concentricity during index changes. This standardisation simplifies inventory management and reduces setup time when replacing worn inserts in both external and internal turning operations. For application recommendations, availability and practical selection support for this Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best insert and holder combination for the intended machining task. Technical data Article number: 6862138 SKU: 6862138-Tungaloy Manufacturer SKU: TUN6862138 Model series: ISO-Drehwendeschneidplatten Name: TPGT070104 TH10 Tungaloy insert Facts Corner radius: 0.4 mm Inscribed size: 07 Included angle: 60° Relief angle: 11° Thickness: 1.59 mm Special features Carbide grade TH10, uncoated cemented carbide Triangular form, ISO‑standard Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) Suitable for external and internal turning Compatible with ISO turning holders FAQ What materials is this insert best suited for? The TPGT 070104 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surface finishes. How does the insert secure in the toolholder? The insert features a cylindrical hole with a one‑sided countersink that enables reliable clamping in ISO seats when the holder matches form, size and fastening specifications. Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO form and secure clamping design make this insert suitable for both external and internal turning operations when paired with an appropriate holder. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength and dimensional control, offering improved surface finish while resisting minor edge chipping in common turning operations. Is the TH10 grade coated? No, the TH10 grade for this insert is uncoated cemented carbide, chosen to keep the cutting edge sharp and to reduce cutting forces for specific material groups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070104 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade, precise ISO geometry and a low corner radius for reliable turning performance; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application guidance. TPGT 070104 TH10 Tungaloy turning insert — triangular ISO insert for precision turning The TPGT070104 TH10 is a triangular ISO turning insert designed for external and internal turning, offering a sharp universal grade for non-ferrous materials and operations that require low cutting forces and a clean surface finish. Sharp universal grade TH10 for non-ferrous Triangular ISO insert, size 07, 0.4 mm radius 11° relief angle for secure seating Cylindrical hole with single-side countersink Increased process efficiency with a sharp uncoated grade The combination of the TH10 specification and uncoated carbide substrate provides a low-friction cutting edge that reduces cutting forces and heat generation. This leads to more stable machining when turning softer, non-ferrous metals and certain alloys. As a result, cycle times can be shortened through higher feed rates or reduced tool pressure, while maintaining a clean surface that lowers the need for secondary finishing. The sharp geometry also helps to preserve component tolerances during high-precision production runs. Secure clamping and reliable seating reduce setup risk The insert’s 11° relief angle and ISO-compliant form ensure predictable seating in standard holders; the cylindrical hole with a single-side countersink (40°–60°) provides positive location and a consistent clamp point. Translating these features into shop-floor terms: the insert seats securely, vibration is minimised and repeatability between indexings is improved. The ISO standardisation simplifies holder selection and reduces downtime from searching for compatible parts, supporting a steady production flow and straightforward tool management. Controlled chip formation and better surface quality Equipped with a one-sided chipbreaker, the insert is tuned to direct chips away from the cutting area, which enhances operator safety and reduces the risk of surface damage. Effective chip control, together with the low cutting forces of the grade, promotes consistent part finish and dimensional stability. For applications where surface integrity matters—such as visible components or precision bores—this combination reduces scrap rates and increases first-pass yield. Compact geometry for versatile turning tasks The triangular insert in size 07 with a 0.4 mm radius and a plate thickness of 1.59 mm offers a balance between edge strength and fine-detail capability. The modest corner radius supports fine finishing passes and contour work, while the triangular form provides multiple indexable edges for economical use. Suitable for both external and internal turning operations, the geometry is particularly useful where small radii and accurate edge location are required; the ISO format also aids rapid integration into existing tool systems. Contact Metav Werkzeuge today for application advice and to secure genuine Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862149 Manufacturer SKU: TUN6862149 SKU: 6862149-Tungaloy Manufacturer: Tungaloy Facts Size: 07 Corner radius: 0.4 mm Thickness: 1.59 mm Relief angle: 11° Included angle: 60° Hole/countersink: cylindrical hole + single-side countersink (40°–60°) Special features Grade/coating: TH10, uncoated carbide Plate shape: triangular ISO insert Chipbreaker: one-sided Typical application: external and internal turning Model series: ISO turning indexable inserts Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non-ferrous materials and applications where a sharp cutting edge and low cutting forces support a clean surface finish; use the insert for aluminium, brass and similar alloys. How does the insert secure in the holder? The triangular ISO form with an 11° relief angle and a cylindrical hole plus single-side countersink (40°–60°) ensures positive location and consistent clamping when matched with the corresponding ISO holder. Can this insert be used for finishing work? Yes. The 0.4 mm radius and sharp geometry are suitable for fine finishing passes that demand good surface quality and tight dimensional control. How many indexable edges are available on the insert? The triangular geometry provides multiple usable corners; indexing the insert allows economical use of each edge before replacement. Is the insert compatible with standard ISO turning systems? The insert follows ISO dimensions for triangular plates; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so confirm holder specifications before fitting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080200 GT9530 Wendeplatten - Tungaloy
Benefit from a combination of GT9530 coated cermet for superior finishing, a 60° triangular geometry for stable cutting, and an 11° clearance that helps extend tool life under steady conditions; order directly via Metav Werkzeuge or request expert matching for holder compatibility. TPGT 080200 GT9530 (TPGT080200L-W08) – ISO turning insert for precision finishing, Tungaloy A TPGT080200L-W08 GT9530 Tungaloy indexable turning insert designed for finishing and light general-purpose turning of steel in ISO-compliant machining setups. Coated cermet grade GT9530 for finishing ISO triangular insert, 60° geometry 11° clearance and 2.38 mm plate thickness Cylindrical hole with single countersink 40°–60° Consistent finishing and longer tool life with coated cermet The coated cermet GT9530 is engineered for wear resistance during finishing cuts and light universal operations on steel. Cermet combines ceramic hardness with metallic toughness, which reduces flank wear and helps maintain edge integrity at modest cutting parameters. This leads to a more consistent surface finish and prolonged intervals between index changes under stable clamping and feed conditions, supporting predictable production runs and lower tooling turnover. Geometry and clamping that support process stability A 60° triangular geometry delivers a compact cutting corner that balances strength and accessibility for external and internal turning. The insert’s 11° clearance angle reduces rubbing while preserving edge support, and the standard ISO form ensures compatibility where form, relief angle, tolerance class, fixing method, size and thickness align. These attributes contribute to reliable chip formation and repeatable results when matched to the correct holder and clamping set-up. Designed for practical system integration The insert is supplied in the ISO format and is intended to be used within a system comprising a matching external holder or boring bar, a supporting shim/clamp set and replacement screws. The cylindrical hole with a single countersink (40°–60°) provides secure and centred fixing, aiding repeatable seating and torque transmission. For productivity, select the appropriate chipbreaker and grade according to workpiece material, machining strategy and machine rigidity. Application guidance for steel machining For finishing and light universal turning of steel, choose feeds and speeds that exploit the surface-quality advantage of the GT9530 grade rather than maximum metal removal. The grade is optimised for stable conditions; in less rigid set-ups or interrupted cuts a tougher grade or different chipbreaker may be preferable. Should clarification be required on parameter selection or holder compatibility, Metav Werkzeuge can provide technical matching to improve process reliability. Contact Metav Werkzeuge for a tailored recommendation and to order the Tungaloy GT9530 inserts for improved finishing performance and predictable tool life Technical data Manufacturer article number: 6997878 SKU: 6997878-Tungaloy Manufacturer SKU: TUN6997878 Model series: ISO turning inserts Application: Turning Data Insert designation: TPGT080200L-W08 ISO code: 080200 Geometry angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 08 Chipbreaker: W08 Special features Grade: GT9530 Cutting material: coated cermet Shape: triangular insert Hole: cylindrical hole with single countersink (40°–60°) Suitable for finishing and light universal turning of steel FAQ What cutting tasks is this insert best suited for? The TPGT080200L-W08 GT9530 insert is optimised for finishing and light universal turning of steel, offering improved surface quality and extended life under stable conditions. How does the GT9530 grade differ from standard carbide grades? GT9530 is a coated cermet grade that emphasises wear resistance and surface finish; compared with many carbide grades it delivers cleaner finishes at finishing feeds and reduced flank wear in steady operations. Which holders are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the ISO designation and the TPGT geometry make the insert suitable for holders and boring bars designed for triangular 60° ISO inserts. Is the insert supplied with screws or clamping parts? The insert is an ISO turning plate intended for use within a system of holder, shim/clamp set and replacement screws; the insert itself is identified as TPGT080200L-W08 GT9530 Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080200 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade, precise ISO geometry and secure clamping for consistent finishing in turning operations; order genuine inserts via Metav Werkzeuge or contact the consultants for compatibility advice. TPGT 080200 NS9530 ISO turning insert for finishing — Tungaloy The TPGT080200L-W08 NS9530 is an ISO triangular turning insert designed for fine finishing of steel in external and internal turning applications. ISO triangular insert, 60° geometry Uncoated cermet grade NS9530 11° clearance for fine finishing Designed for continuous cuts in steel Achieve consistent fine finishes with a low-force cutting edge The triangular insert is engineered as a finishing grade: the uncoated NS9530 cermet provides a very sharp cutting edge and low cutting forces, which translates into superior surface quality on steel components. As a result, a single-pass or light multi-pass finishing strategy yields consistent surface roughness with reduced need for secondary operations. The material choice and geometry are optimised for continuous cuts, where vibration damping and edge integrity matter most. ISO compatibility and secure clamping reduce setup uncertainty Supplied as an ISO-standard indexable insert, the part is compatible with holders that match its form, clearance angle, tolerance class, attachment and thickness. The insert’s 11° clearance and 2.38 mm plate thickness ensure predictable seating and generation of the intended tool geometry when used with a suitable external holder or back-up bar. The presence of a centre hole with a single-side countersink supports reliable fixation and repeatable positioning in standard clamping systems. Productivity gains through stable chip control and repeatable performance The W08 chipbreaker is matched to the plate geometry to promote stable chip formation in finishing passes, reducing the risk of built-up edge and erratic tool marks. The 60° triangular profile offers a balance between rigidity and access to workpiece features, delivering practical process stability that supports higher spindle speeds and consistent cycle times. This combination is particularly advantageous where reproducible part quality and uptime are priorities. Practical application notes for material and cutting strategy Intended primarily for finishing of steel, the insert performs best with small depths of cut and moderate feed rates where surface integrity is the goal. As an uncoated cermet, the grade excels at maintaining a keen edge under continuous cutting; however, it is advisable to select the matching holder rigidity and cutting parameters according to the machine and workpiece setup. The ISO-designation and size coding simplify tooling selection and spare-part stocking for production environments. Order original Tungaloy inserts through Metav Werkzeuge for assured compatibility and process support, or contact Metav Werkzeuge’s technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical data Article number: 6997966 Manufacturer SKU: TUN6997966 SKU: 6997966-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPGT080200L-W08 NS9530 Tungaloy-Wendeplatte Material: carbide Numbers / Core technical data Insert angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Size designation: 08 ISO code: 080200 Designs / Special features Uncoated cermet grade NS9530 Chipbreaker: W08 Triangular plate form With centre hole and single-side countersink (40°–60°) Application: turning (external and internal) Compatible with ISO turning holders and clamping sets FAQ What materials is this insert suited for? The TPGT080200L-W08 NS9530 insert is specified for finishing applications in steel and is optimised for continuous cutting where a fine surface finish is required. How does the NS9530 grade affect performance? The NS9530 cermet grade offers a very sharp edge and low cutting forces, improving surface quality and edge stability during finishing cuts with the Tungaloy insert. Which chipbreaker is fitted and why? The W08 chipbreaker promotes stable chip formation during finishing, supporting predictable surface results and reducing the likelihood of built-up edge on steel. Is this insert compatible with all ISO triangular holders? Compatibility depends on holder form, clearance, tolerance class, attachment method, size and plate thickness; the insert’s ISO designation and centre-hole arrangement are standard, facilitating matching with appropriate holders. What clamping features does the insert have? The plate includes a central cylindrical hole with a one-sided countersink (40°–60°) designed for secure fixation and repeatable seating in suitable clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080202 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 wear resistance and a precise 0.2 mm corner radius for consistent, productive turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGT080202 GH110 ISO turning insert (triangular, 60°) – Tungaloy A TPGT080202L-W08 GH110 Tungaloy ISO turning insert designed for external and internal turning, offering stable chip formation and reliable cutting-edge performance. ISO triangular insert, 60° geometry GH110 grade for wear resistance 0.2 mm corner radius for precision With hole and 40°–60° countersink Maximise uptime with consistent cutting performance The combination of the GH110 cutting grade and a sintered carbide substrate provides a balance of wear resistance and edge toughness that keeps productivity high under standard turning conditions. This behaviour reduces unexpected tool changes and helps to maintain a steady cycle time. Selecting the appropriate chipbreaker and grade ensures repeatable results across batches, supporting secure planning and lower total manufacturing costs. Accurate form and edge geometry for precise component tolerances A defined 60° included angle and the 0.2 mm corner radius deliver predictable dimensional control in both finishing and light roughing passes. The insert’s 11° relief angle supports reliable contact conditions and helps to avoid rubbing, while the 2.38 mm plate thickness contributes to mechanical stability in the clamping system. These geometric parameters make the insert suitable where repeatability and surface finish are priorities. Productive turning through controlled chip formation The integrated W08 chipbreaker is configured to promote controlled chip flow during turning operations, which reduces tool interruptions and improves surface quality. When matched with the right holder and machining parameters, the geometry and grade combination enable efficient material removal with fewer reworks. This rational performance focus helps to increase throughput while maintaining component quality. Simple system integration for workshop environments As an ISO-format insert, the component fits established holder systems when the form, relief angle, tolerance class, fastening method, size and thickness are matched. The insert includes a cylindrical hole with a one-sided countersink (40°–60°) for secure fastening, supporting quick changeover and repeatable clamping. The plate designation and manufacturer SKU facilitate inventory management and reordering in production planning. Discuss specific application requirements with Metav Werkzeuge and specify Tungaloy GH110 inserts for reliable, productive turning — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6808876 Manufacturer SKU: TUN6808876 Model series: ISO turning inserts Numbers Corner radius: 0.2 mm Included angle: 60° Relief angle: 11° Plate thickness: 2.38 mm Size designation: 08 Special features Grade: GH110 (Tungaloy) Material: carbide Chipbreaker: W08 Hole: cylindrical hole + one-sided countersink (40°–60°) Shape: triangular (60°) Application: turning (external and internal) Plate designation: TPGT080202L-W08 FAQ What is the primary application for this insert? The TPGT080202L-W08 GH110 Tungaloy insert is intended for turning operations, suitable for both external and internal turning tasks. Which grade and chipbreaker are supplied with the insert? This item features the GH110 grade and a W08 chipbreaker, designed to balance wear resistance and chip control for productive machining. How is the insert secured in the tool holder? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure mechanical fastening compatible with standard ISO clamping systems. Can this insert deliver precise surface finishes? Yes; the combination of the 60° geometry, 0.2 mm corner radius and the GH110 grade supports repeatable dimensional accuracy and improved surface quality. What information is useful for reordering or inventory? Refer to the manufacturer article number 6808876 and the manufacturer SKU TUN6808876 when reordering to ensure the correct ISO turning insert variant. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 080202 GT9530 Wendeplatten - Tungaloy
Reliable finishing and extended tool life result from the GT9530 coated cermet grade combined with the ISO-standard triangular geometry and an optimised W08 chipbreaker; this delivers consistent surface quality and longer tool life in stable turning applications. Order the insert directly via Metav Werkzeuge or request advice from our consultants for holder compatibility and application setup. TPGT 080202 GT9530 Tungaloy turning insert — coated cermet, W08 chipbreaker TPGT080202L-W08 GT9530 is an ISO-style triangular insert for precision external and internal turning, optimised for fine surface finish and prolonged tool life in stable machining conditions Coated cermet grade GT9530 Optimised W08 chipbreaker for finishing ISO triangular form TPGT 08 Cylindrical hole with single-side countersink Precision finish and longer service intervals with a cermet grade The GT9530 coated cermet substrate is engineered for wear resistance in finishing and light universal turning of steel, providing improved surface quality and extended tool life compared with conventional grades. The fine-grain cermet coating reduces flank wear under stable cutting conditions, which translates into fewer tool changes and more productive spindle time. Quality of finish is improved while maintaining economical part-to-part consistency. Controlled cutting geometry for consistent chip control The triangular ISO form TPGT 08 with a 0.2 mm corner radius and W08 chipbreaker offers predictable chip formation during finishing cuts. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure secure clamping and repeatable positioning in compatible ISO holders. The 11° clearance angle and 2.38 mm thickness contribute to mechanical stability and heat dissipation, which supports consistent cutting forces and surface integrity when turning. Application range and holder compatibility explained Designed primarily for turning of steel, this insert suits both external and internal operations when stable setups are available; select the chipbreaker and grade to match workpiece material, cutting mode and machine rigidity. Compatibility with a specific toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness — the insert is supplied in the ISO series intended for standard holders. For marginally unstable setups, choose a more robust geometry or reduced depth of cut to preserve finish and tool life. Simple system integration, reliable production results Integration into existing turning systems is straightforward: the insert is part of a conventional ISO turning system comprising the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. The combination of coated cermet performance, repeatable ISO dimensions and the W08 chipbreaker supports predictable cycle times and reproducible surface quality, making it suitable for batch production and finishing operations where process stability is valued. Contact Metav Werkzeuge today for tailored advice on the TPGT 080202 GT9530 turning insert, fast availability and application-specific recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6997879 SKU: 6997879-Tungaloy Manufacturer SKU: TUN6997879 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts ISO code: 080202 Size: 08 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Special features Coating / grade: GT9530 Substrate: coated cermet Chipbreaker: W08 Shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Application: Turning Compatibility: ISO-standard holders (form, clearance angle, tolerance class, fastening, size, thickness) FAQ What materials is this insert suitable for? The GT9530 grade is formulated for turning of steel; the TPGT 080202 GT9530 insert delivers wear-resistant finishing performance on steels under stable conditions. Can the insert be used for internal as well as external turning? Yes — the ISO triangular geometry and hole design permit use in both external holders and boring bars for internal operations when the correct holder and clamping are selected. What finishing characteristics does the W08 chipbreaker provide? The W08 chipbreaker is optimised for finishing and light universal turning, promoting short, controllable chips and a fine surface texture when cutting parameters and setup are stable. How is holder compatibility determined for this insert? Compatibility depends on the insert form, 11° clearance angle, tolerance class, fastening method, size and thickness; the insert follows ISO standards intended for matching holders. What are the key dimensions and identifiers for ordering? Order using the designation TPGT 080202 GT9530 or article number 6997879; key dimensions include 2.38 mm thickness and 0.2 mm corner radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com