TPGT 110304 NS9530 Wendeplatten - Tungaloy
Combine precise finishing performance with ISO compatibility and low cutting forces for efficient turning of steel; benefit from the sharp uncoated NS9530 cermet grade and standardised form for reliable tool changes. Order or request advice via Metav Werkzeuge for fast implementation. TPGT 110304 NS9530 Tungaloy indexable insert — finishing grade for turning, 11° relief TPGT 110304 NS9530 is an ISO triangular indexable insert designed for precision external and internal turning, optimised for finishing cuts in steel. ISO triangular insert TPGT profile Uncoated cermet grade NS9530 for finishing Sharp edge for superior surface finish Compatible with standard ISO holders Achieve superior surface quality with a finishing-grade cermet The NS9530 uncoated cermet is engineered for low cutting forces and a sharp cutting edge, delivering consistently high surface finish on steel in continuous turning operations. As a finishing grade, the insert performs best at small depths of cut and steady feeds, where the combination of a hard cermet substrate and a keen edge reduces vibration and minimises built-up edge. Cermet materials blend ceramic hardness with metal toughness, which helps to maintain edge geometry and improves dimensional consistency across long production runs while producing fine surface textures. Fast changeovers and consistent set-up through ISO conformity Designed to the ISO indexable insert system, compatibility with holders is determined by shape, relief angle, tolerance class, clamping style, size and thickness. The triangular geometry with a 60° included angle and 11° relief ensures predictable seat position and repeatable cutting conditions. The insert’s thickness of 3.18 mm and the 11 mm size provide straightforward interchangeability with standard external holders and boring bars, shortening downtime and simplifying inventory management. Clear ISO conformity reduces set-up variance and supports reproducible process parameters across different machines and operators. Stable chip control and application guidance for finishing cuts This insert features a one-sided chipbreaker, designed to promote steady chip formation during continuous cuts. A chipbreaker controls the chip flow and shear zone, lowering cutting forces and improving surface integrity; for the NS9530 grade this supports high-quality finishing of steel components. The insert includes a central hole with a cylindrical bore and a single-sided countersink (40°–60°) to match a broad range of clamp and screw systems. Select feeds and depths aligned with a finishing strategy—moderate feed, shallow depth—to exploit the sharp edge and achieve the best combination of surface finish and tool life. Practical selection, handling and support for production use When choosing an insert for a specific turning task, match the NS9530 grade and the one-sided chipbreaker to the workpiece material and machining stability: continuous, vibration-free set-ups favour this finishing cermet. Inspect seating surfaces and clamping screws when fitting the insert; the ISO form and hole style ensure secure fastening in compatible holders. For advice on holder compatibility, recommended cutting data or process optimisation, Metav Werkzeuge provides application support and technical consultation to ensure the insert meets production requirements while minimising trial-and-error. Contact Metav Werkzeuge for an application assessment of the Tungaloy NS9530 finishing inserts and tailored cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and next steps Technical data Article number: 6997979 Manufacturer SKU: TUN6997979 Model series: ISO indexable turning inserts ISO designation: TPGT110304 Grade: NS9530 Cutting material: uncoated cermet Facts Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.18 mm Size: 11 mm Included angle: 60° Hole: with hole, cylindrical + single-sided countersink (40°–60°) Special features Triangular insert form One-sided chipbreaker Designed for external and internal turning (finishing) Sharp edge for low cutting forces and high surface finish ISO conformity for standard holder compatibility FAQ What applications suit this insert best? The TPGT110304 NS9530 Tungaloy indexable insert is intended for finishing operations in turning, covering both external and internal turning of steel where a fine surface finish and low cutting forces are required. Is the insert coated and what are the advantages? The insert is an uncoated cermet grade (NS9530); this provides a very sharp cutting edge, lower cutting forces in finishing cuts and excellent surface quality on steel components. Which dimensions and angles are relevant for holder compatibility? Key dimensions are a corner radius of 0.4 mm, thickness 3.18 mm and size 11 mm; the insert features a 60° included angle and an 11° relief angle, which determine seat fit and orientation in standard ISO holders. How does the chipbreaker affect machining? The one-sided chipbreaker on this insert promotes stable chip formation during continuous cuts, reducing cutting forces and supporting consistent surface integrity for finishing applications. How can Metav Werkzeuge help with process selection? Metav Werkzeuge can advise on holder compatibility, recommended feeds and speeds, and process setup to exploit the NS9530 finishing grade most effectively; contact details are available for tailored technical support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and low cutting forces combined with ISO compatibility for reliable turning results; order directly via Metav Werkzeuge or consult our team for application guidance. TPGT110304 NS9530 turning insert — triangular ISO finishing insert by Tungaloy The TPGT110304 NS9530 is an ISO-standard triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge and compatibility with standard external and internal holders. ISO triangular turning insert TPGT110304 Uncoated cermet NS9530 for finishing steel Sharp cutting edge for low cutting forces Cylindrical hole with one-sided countersink Consistent high-quality finishes for steel components The uncoated cermet grade NS9530 is formulated for finishing passes on steel, delivering a sharp cutting edge that reduces ploughing and produces a high surface finish. In practical terms, this means fewer secondary operations and a more consistent surface right off the tool, which supports shorter process chains and predictable part quality. The material choice and ground edge geometry are particularly suited to continuous cuts and small depths of cut, where surface integrity and dimensional stability matter most. Secure clamping and predictable tool geometry The triangular insert features a 0.4 mm nose radius, a 11° relief angle, and a 60° included angle, which together define the contact geometry and cutting engagement. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure stable clamping in compatible holders. Compatibility with a given holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; the clear ISO specification of this insert supports repeatable mounting and machining results when assembled with an appropriate external holder, shim or clamping set and replacement screws. Application-focused design for finishing turning With a single-sided chipbreaker, this insert is optimised for finishing cuts on external and internal turning operations where low cutting forces and excellent surface quality are required. Selecting the correct chipbreaker and grade according to material, cutting mode and machine stability will yield the best outcome: reduced vibration, consistent chip formation and controlled cutting loads. The insert’s construction and dimensions make it a practical choice for shops that run high-volume finishing cycles or precision single-part manufacturing. For tailored advice on integrating the NS9530 grade into production or to place an order via Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 — we will recommend the compatible holder and clamping set for the intended application. Technical data Article number: 6997978 Manufacturer SKU: TUN6997978 Model series: ISO turning indexable inserts ISO designation: TPGT110304 Grade: NS9530 Material: cemented carbide Facts Thickness: 3.18 mm Size: 11 Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Countersink angle: 40°–60° Special features Triangular insert shape Cylindrical hole with one-sided countersink Single-sided chipbreaker Intended application: turning System components: insert, external holder or boring bar, shim/clamp and replacement screws FAQ What materials is this insert best suited for? The NS9530-grade TPGT110304 insert is optimised for finishing on steel and is specified for continuous cuts and small depths of cut to achieve high surface quality. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when paired with the correct external holder or boring bar and appropriate clamping components. How does the hole style affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure locating and reliable clamping in compatible ISO holders, improving repeatability. Which feature ensures low cutting forces? The combination of the sharp cutting edge and the NS9530 cermet grade reduces cutting forces, which helps to maintain surface finish and dimensional control during finishing passes. What system components are required to mount the insert? Mounting requires a compatible external holder or boring bar, a suitable shim or clamp set and replacement screws to match the insert’s size, thickness and hole configuration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 110308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of sharp-edge finishing performance, ISO-standard compatibility and a low-cutting-force grade for reliable surface quality; order the insert directly via Metav Werkzeuge or ask our consultants for application support. TPGT110308 NS9530 Tungaloy indexable turning insert — uncoated cermet, finishing TPGT110308 NS9530 is an ISO-standard triangular indexable insert designed for precision turning and finishing of steel components Uncoated cermet grade NS9530 Finishing grade with sharp cutting edge Triangular insert, 60° included angle With central hole and single-sided chipbreaker Precision finishing for superior surface quality The uncoated cermet grade NS9530 is formulated as a finishing grade for steel, providing a sharp cutting edge and low cutting forces that reduce vibration and rework. This makes the insert particularly effective for continuous cuts and small depths of cut, where a consistent surface finish is critical. The small corner radius 0.8 mm supports fine edge definition, so turned components reach required tolerances with fewer passes and minimal secondary operations. Secure mounting and ISO compatibility for predictable performance As an ISO-standard insert, the triangular geometry and seat dimensions determine holder compatibility; the fit depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with single-side countersink (40°–60°) to ensure secure clamping in most commercial external holders and boring bars. With a 3.18 mm plate thickness and a 60° included angle, the component provides a stable contact area which helps maintain repeatable tool life and process stability. Stable chip control and efficient finishing results The single-sided chipbreaker is optimised for finishing operations and contributes to stable chip formation during uninterrupted cuts. Combined with the NS9530 material properties, this geometry reduces built-up edge and minimises cutting forces, supporting longer uninterrupted production runs and consistent surface roughness. Selecting a chipbreaker and grade that match workpiece material and machine stability will directly reduce cycle times and raise first-pass yield. Practical selection advice and system setup For best results in precision turning applications, the insert should be paired with a suitable external holder or boring bar, an appropriate shim or clamping set, and replacement screws matching the seat. The ISO system approach—insert, holder, shim and fasteners—ensures that the cutting edge and clearance angles work together to deliver the promised finish. The TPGT110308 form factor is particularly appropriate for shops focused on fine finishing and predictable repeatability rather than heavy roughing. For tailored technical advice, availability and ordering of the Tungaloy NS9530 finishing insert please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; the team will advise on holder matching and delivery options. Technical data Manufacturer article number: 6997980 SKU: 6997980-Tungaloy Manufacturer SKU: TUN6997980 Type designation: TPGT110308 Core data Plate form: triangular Plate size: 11 Plate thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: single-sided Hole style: cylindrical hole with single-side countersink 40°–60° Application: Turning Series: ISO indexable turning inserts FAQ What materials is this insert designed for? The NS9530 finishing grade is intended primarily for steel; the uncoated cermet construction of the TPGT110308 NS9530 insert is tuned for low cutting forces and excellent surface finish in continuous turning of steel components. How can I check holder compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; because the TPGT110308 is ISO-standard, match the triangular seat, 11° relief angle and 3.18 mm thickness to the corresponding holder specifications. Which geometric parameters are most relevant for finish control? Key dimensions are the corner radius 0.8 mm, plate thickness 3.18 mm, included angle 60° and the 11° relief angle; these affect edge strength, contact area and achievable surface roughness for the given feed and depth of cut. What chip control does the insert provide? The single-sided chipbreaker offers controlled chip formation suited to finishing cuts; for interrupted or heavy roughing operations a different chipbreaker or grade should be considered. Can this insert improve productivity in finishing operations? Yes—by combining the NS9530 finishing grade with a stable clamping system and the correct holder, the insert reduces rework, lowers cutting forces and supports consistent first-pass quality for precision turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130302 GT720 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, the GT720 cermet grade and the fine 0.2 mm corner radius to achieve consistent surface quality and dimensional accuracy in turning applications; order this insert directly via Metav Werkzeuge or consult our specialists for process parameters and holder matching. TPGT 130302 GT720 triangular turning insert for finishing — Tungaloy TPGT130302 GT720 Tungaloy insert for ISO‑standard turning, designed for finishing and light external and internal turning of steel ISO‑standard triangular insert, 3.18 mm thick GT720 cermet for finishing and light turning 0.2 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Precision finishing for turning operations The TPGT130302 GT720 insert is engineered for finishing and light turning where surface finish and dimensional accuracy matter. The GT720 cermet grade combines high hot hardness with a wear‑resistant cutting edge to promote even wear and consistent part quality over longer tool life. The small 0.2 mm corner radius reduces tool marks while allowing stable engagement at low feeds, delivering measurable improvements in Ra and repeatability compared with larger radii. For shops moving from roughing to finishing, the insert offers a reliable step‑up in product consistency without complex setup changes. Reliable clamping and holder compatibility for repeatable results Compatibility with the clamping system is defined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The triangular geometry with an 11° clearance angle and a cylindrical hole plus single‑side countersink (40°–60°) requires a matching ISO‑type holder and the correct screw/washer combination to secure the seat and maintain repeatable cutting geometry. Correct seating reduces vibration and index‑to‑index variability, which in turn protects component tolerances and reduces scrap rates. Technical personnel benefit from verifying holder form and tolerance class before first use to ensure process stability. Controlled chips and predictable wear for productive machining The single‑side chipbreaker geometry is focused on finishing operations; it promotes controlled chip flow and consistent cutting forces when paired with the GT720 grade. This combination supports a steady contact zone that helps avoid abrupt edge deterioration and minimises process interruptions. In practice, predictable uniform wear leads to longer effective tool life and fewer mid‑shift adjustments. For process engineers, that translates into reduced setup times and a more economical production rhythm when machining medium‑strength steels. Choosing and setting up the insert for best performance Key dimensions to consider when selecting this insert are the inscribed diameter (13 mm), the plate thickness 3.18 mm and the corner radius 0.2 mm; these determine suitable feed and depth‑of‑cut windows for finishing passes. The triangular format provides three usable cutting edges per index, optimising cost per edge when rotated correctly. Clarification of terms: the clearance angle (often called relief angle) is the small angle between the flank and the workpiece that prevents rubbing; the corner radius influences both surface finish and edge strength. For tailored cutting data and grade selection across different steels, Metav Werkzeuge can supply empirical parameters and compatibility checks. For precise finishing with Tungaloy GT720 inserts, contact Metav Werkzeuge for tailored cutting data and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6851886 Manufacturer SKU: TUN6851886 Model series: ISO‑Drehwendeschneidplatten Label: TPGT130302 GT720 Tungaloy‑Wendeplatte Core specifications Thickness: 3.18 mm Size (inscribed): 13 mm Included angle: 60° Corner radius: 0.2 mm Clearance angle: 11° Hole style: with hole; cylindrical hole + single‑side countersink (40°–60°) Design & features Triangular insert form One‑sided chipbreaker Grade: GT720 (cermet or coated cermet) Application: turning (external and internal finishing) Material (data field): carbide FAQ Is this insert compatible with standard ISO turning holders? Compatibility depends on holder form, flank clearance and fastening; the TPGT130302 GT720 Tungaloy insert is ISO‑standard and requires a matching triangular seat, appropriate screw and washer for the cylindrical hole with countersink (SKU 6851886‑Tungaloy). What applications is the GT720 grade intended for? GT720 is specified for finishing to light machining of steel, emphasising surface finish, dimensional accuracy and uniform wear when used in the correct feed and speed window. How does the 0.2 mm corner radius affect machining? The 0.2 mm corner radius on the TPGT130302 insert balances surface quality and edge strength; it supports finer surface finish at lower feeds while maintaining sufficient robustness for light finishing cuts. What clamping elements are required for secure fixation? Use an ISO‑compatible triangular seat with the correct screw and washer combination sized to match the cylindrical hole and 40°–60° countersink; correct clamping preserves the insert geometry and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 130302 GT9530 Wendeplatten - Tungaloy
Benefit from a combination of coated cermet wear resistance and ISO compatibility for consistent finishing results; the stable geometry and one-sided chipbreaker help extend tool life and surface quality. Order genuine Tungaloy inserts directly via Metav Werkzeuge or request application advice from our consultants. TPGT130302 GT9530 triangular ISO turning insert, coated cermet, for finishing TPGT130302 GT9530 is a triangular ISO turning insert designed for external and internal turning where superior surface finish and extended tool life are required under stable machining conditions Coated cermet grade GT9530 for long life Triangular 60° geometry for versatile turning 0.2 mm corner radius for fine finishing 11° relief and 3.18 mm thickness for stable clamping Consistent finishing performance and extended tool life The coated cermet composition and the GT9530 grade deliver a wear-resistant cutting edge tailored for finishing to light general-purpose turning of steel. The cermet coating reduces built-up edge and improves surface integrity, which translates into fewer reworks and longer tool cycles. With a 0.2 mm corner radius and a shallow chip groove, the insert supports fine surface generation at controlled feeds and depths, enabling predictable part quality in repeat production runs. Mounting and compatibility for reliable set-up Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness, as set out for ISO inserts. The triangular ISO turning insert format and 3.18 mm thickness provide solid seating in a matching external holder or boring bar; the insert is supplied with a cylindrical hole and single-side countersink (40°–60°) for secure clamping. Selecting a holder with the correct tolerance class and clamping set ensures consistent clamping force, minimises vibration and preserves the cutting edge during interrupted cuts. Material applications and machining advice The grade is optimised for machining steel, offering good surface finish and extended life in stable setups; the single-sided chipbreaker should be matched to the workpiece and cutting parameters to control chip form. For finishing passes at moderate cutting speeds, the insert maintains edge integrity and reduces the need for frequent index changes. When higher stability or roughing is required, choose a different chipbreaker geometry or a more robust grade; the system approach of insert plus holder and shim allows tailored solutions for each operation. Practical system considerations and maintenance A complete system comprises the ISO insert, a compatible external holder or boring bar, a support shim or clamp kit and replacement screws. Track the number of index changes and inspect the seating face for burrs or chips to prevent premature wear; replacing fasteners and shims as part of routine maintenance preserves repeatability. The clear ISO designation and the SKU TUN6997885 simplify reordering and inventory management, ensuring rapid replenishment for productive machining cycles. For application guidance or to obtain genuine Tungaloy turning inserts, contact Metav Werkzeuge quoting SKU TUN6997885 at info@metav-werkzeuge.com or +49 2822 7131930 for fast, expert support Technical data Article number: 6997885 Manufacturer SKU: TUN6997885 Model series: ISO turning inserts Type designation: TPGT130302 Facts Plate size: 13 Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Insert angle: 60° Special features Coating / grade: GT9530 (coated cermet) Plate shape: triangular Hole: with hole; cylindrical hole + one-side countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning; finishing to light general purpose on steel System composition: ISO insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert best suited for? The TPGT130302 GT9530 coated cermet insert is optimised for machining steel, providing good surface finish and extended tool life under stable cutting conditions. How is the insert fixed to the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for clamping; correct holder tolerance and clamp hardware ensure secure, repeatable seating for the TPGT130302. What cutting geometry should be used for finishing? For finishing, employ moderate cutting speeds with a small to medium feed and take advantage of the 0.2 mm corner radius to achieve fine surface finish with the GT9530 grade. Which system components are required for a complete setup? A complete machining system includes the ISO insert, a compatible external holder or boring bar, the appropriate shim or clamp set and replacement screws to maintain reliable clamping. How can spare inserts be identified for reordering? Use the type designation TPGT130302, the grade GT9530 and the manufacturer SKU TUN6997885 to identify and reorder the exact Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finish performance, stable chip control and ISO compatibility to streamline turning operations; order directly via Metav Werkzeuge or contact the consultants for application advice. TPGT130302 NS9530 indexable insert for turning — Tungaloy, triangular 60° geometry TPGT130302 NS9530 is an ISO‑standard indexable turning insert intended for finish turning of steel, supplied as a triangular insert with a 60° main cutting angle and a cylindrically bored mounting hole with one‑sided countersink. Uncoated cermet NS9530 for finish turning Triangular 60° geometry, 13 mm size 0.2 mm corner radius for fine edge finish Cylindrical hole with 40°–60° countersink Improved surface finish with a finish‑grade cermet The uncoated cermet grade NS9530 is formulated for low cutting forces and a sharp cutting edge, which translates into consistent, high‑quality surface finishes on steel during continuous cutting. As a finish‑grade material, it reduces the need for secondary operations and helps maintain dimensional tolerances when light depths of cut are used. The combination of a crisp edge and a 0.2 mm corner radius supports fine edge integrity and predictable edge wear, yielding repeatable results in serial production. Stable clamping and repeatable positioning for efficient turning The insert’s triangular 60° geometry and the cylindrical hole with a 40°–60° countersink ensure secure seating in ISO‑compliant toolholders. This mechanical stability reduces vibrations and improves repeatability between insert changes. With a thickness of 3.18 mm and a standard size of 13 mm, the insert integrates seamlessly into common holder systems; compatibility is governed by form, relief angle, tolerance class, fixing method and size, all standardised for straightforward tool selection and inventory management. Optimised cutting behaviour and chip control A single‑sided chipbreaker on the active face supports reliable chip formation during finishing passes. For continuous cuts and small feed depths, this chip control reduces the risk of built‑up edge and promotes smooth evacuation of chips, improving surface quality and tool life. The rake angle of 11° moderates cutting forces and is particularly suitable for finish turning of steel, where low cutting force and surface integrity are priorities. Practical benefits for production workflows Adopting this insert design can shorten cycle time by avoiding unnecessary secondary finishing, while the material’s wear characteristics make tool life more predictable. The insert is supplied as part of an ISO insert system that includes the matching external holder or boring bar, clamp set and replacement screws; choosing the correct chipbreaker and grade according to workpiece material and stability ensures the best economic outcome. The clear ISO designation facilitates ordering and stock control, reducing administrative friction in replenishment. Contact Metav Werkzeuge for application support, sample availability or to discuss the suitability of the Tungaloy TPGT130302 NS9530 insert for specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997982 Manufacturer SKU: TUN6997982 Label: TPGT130302 NS9530 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Geometry angle: 60° Size (inscribed circle / designation): 13 mm Thickness: 3.18 mm Rake angle: 11° Corner radius: 0.2 mm Hole: with hole Hole / countersink: cylindrical hole + one‑sided countersink (40°–60°) Special features Material: cemented carbide Grade: NS9530 (uncoated cermet) Chipbreaker: single‑sided Application: finish turning of steel Recommended for continuous cutting and small depths of cut ISO‑standardised insert for compatible turning holders FAQ What materials is this insert intended for? The TPGT130302 NS9530 insert is a finishgrade cermet optimised for steel machining and is recommended where low cutting forces and high surface quality are required. Which toolholders are compatible with this insert? Compatibility is determined by standard ISO criteria — form, relief angle, tolerance class, fixing method, size and thickness — so the insert fits ISO‑compliant triangular turning holders and boring bars designed for a 13 mm insert. How does the chipbreaker affect performance? The single‑sided chipbreaker on this insert supports stable chip formation during finishing passes, improving chip evacuation and surface finish when used at small depths of cut and in continuous cutting. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius produces a fine cutting edge that balances edge strength with a refined surface finish, making it suitable for finishing operations where tight surface tolerance and minimal post‑processing are desired. Is the insert suited to interrupted or heavy roughing cuts? This grade and geometry are optimised for finish turning and continuous cuts with small depths of cut; for interrupted cuts or heavy roughing a more robust grade and different chipbreaker would be appropriate. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 130302 NS9530 Wendeplatten - Tungaloy
High-surface-quality finishing and low cutting forces are delivered by the uncoated NS9530 cermet grade combined with the precise ISO triangle geometry and a 0.2 mm nose radius; this results in secure, repeatable results for continuous turning operations. Order directly via Metav Werkzeuge or consult our specialists for matching holders and clamping kits. TPGT 130302 NS9530 Tungaloy turning insert — triangular ISO finishing geometry The TPGT130302 NS9530 is a triangular ISO turning insert optimised for finishing steel in continuous-cut turning, offering a sharp edge and low cutting forces for superior surface quality. ISO TPGT130302 geometry for standard holders Uncoated NS9530 cermet for fine finishing Sharp cutting edge with 0.2 mm nose radius Cylindrical hole with single-side countersink Consistent finishing performance with low cutting forces The combination of an uncoated cermet grade and a finely honed cutting edge gives a measurable advantage when producing high-quality external or internal turned surfaces. With a nominal 0.2 mm nose radius and a 60° triangular form, the insert supports small depths of cut typical for finishing passes while maintaining low cutting forces. The result is a reliable reduction in vibration and micro-chatter, which translates directly into improved surface finish and fewer rejected parts. For operations that demand continuous cutting at stable conditions, the fine-grained cermet substrate minimises built-up edge and holds a sharper profile over longer runs. Robust chip control and predictable tool life A single-sided chipbreaker geometry in this grade is designed to evacuate chips cleanly under typical finishing feeds and speeds. The NS9530 chemistry is tuned for finishing on steel: it preserves a sharp cutting edge and reduces the incidence of edge flaking in stable setups. Predictable chip formation contributes to safer cycle times and easier process parameter tuning, which supports higher first-pass yield and lower downstream rework. Combining the insert with the appropriate clamping set and holder ensures consistent seat contact and repeatable results across tool changes. Practical compatibility and system considerations Compatibility with a given toolholder is determined by form, clearance angle, tolerance class, fixation, size and thickness; the insert features a cylindrical hole with a single-side countersink (40°–60°) to match common clamping systems. The 11° clearance angle and 3.18 mm plate thickness provide a stable seating and allow the use of both external holders and boring bars where the ISO TPGT form is supported. For assembly, the usual system comprises the ISO insert, a matching external holder or boring bar, a backing/locking kit and replacement clamp screws. Clarifying holder style and seating dimensions before ordering avoids surprises at installation. Practical benefits for workshop productivity Using a finishing-grade cermet insert reduces downstream processing and polishing time by delivering near‑final surface integrity directly from the lathe. The sharp edge geometry and the NS9530 grade promote lower cutting forces and a reduced tendency to form built-up edge during continuous cuts; this means fewer interruptions and more predictable tool-change intervals. Where tight tolerances and consistent surface quality are priorities, the combination of ISO standardisation and a dedicated finishing grade supports straightforward process transfer between machines and operators. For tailored advice on Tungaloy NS9530 finishing inserts and holder matching, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm availability and compatibility. Technical data Article number: 6997981 Manufacturer SKU: TUN6997981 SKU: 6997981-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Plate thickness: 3.18 mm Inscribed circle / size: 13 mm Special features Uncoated cermet grade NS9530 Designed for finishing on steel Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Triangular plate form (TPGT) Application: turning (external and internal) System components: ISO insert, suitable holder or boring bar, backing/clamping set and replacement screws Substrate: cemented carbide FAQ What machining tasks is this insert optimised for? The TPGT130302 NS9530 insert is optimised for finishing operations in turning, particularly continuous cuts on steel where a sharp edge and low cutting forces are required. Can the insert be used in internal as well as external turning? Yes, the triangular ISO form and the 13 mm inscribed size make the insert suitable for both external and internal turning when paired with an appropriate holder or boring bar. What does the NS9530 grade mean for surface finish? NS9530 is an uncoated cermet finishing grade that preserves a sharp cutting edge and reduces built-up edge, resulting in improved surface integrity and fewer polishing steps after turning. How does the cylindrical hole and countersink affect clamping? The cylindrical hole with a single-side countersink (40°–60°) matches common clamping arrangements and ensures secure seating and repeatable clamping forces when used with compatible holders. Is the TPGT130302 compatible with standard ISO holders? The insert follows ISO geometry for TPGT-form turning inserts; compatibility is determined by holder form, clearance angle, tolerance class, fixation, size and thickness, so verify these dimensions before selecting a holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130302 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated cermet grade for superior finishing on steel combined with a compact ISO triangular format for secure clamping and repeatable results; order directly via Metav Werkzeuge or consult the team for machining advice and supply options. TPGT 130302 NS9530 Tungaloy turning insert – triangular 13 mm, 60° TPGT130302 NS9530 Tungaloy-Wendeplatte is an ISO-format triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. ISO triangular insert TPGT 130302 format Uncoated cermet grade NS9530 for finishing 13 mm inscribed circle, 3.18 mm thickness Cylindrical hole with 40°–60° single-side countersink Exceptional surface quality through a finishing-grade cermet The TPGT130302 NS9530 is a purpose-built finishing insert made from an uncoated cermet grade optimised for steel. Cermet combines ceramic hardness with metallic toughness, which produces a sharp cutting edge that reduces built-up edge and lowers cutting forces. This characteristic directly benefits surface integrity: parts require less downstream polishing and meet tighter surface-roughness targets with fewer passes. For shops seeking consistent finishing performance, the material choice yields shorter cycle times on continuous-feed turning operations while preserving dimensional accuracy. Secure clamping and geometry that reduces vibration The triangular ISO geometry with a 60° included angle provides three usable corners per indexable insert and a compact seating footprint that contributes to rigidity in the toolholder. The insert’s dimensions — 13 mm inscribed circle and 3.18 mm thickness — combined with an 11° relief angle ensure compatibility with a broad range of ISO external and internal turning holders. Stable seating and correct tolerance matching reduce micro‑movement at the cutting edge, which in turn extends edge life and improves repeatability across multiple workpieces. Choosing the appropriate holder, underlay and clamp is essential to unlock these benefits. Designed for continuous cuts and precise small-depth finishing A single-sided chipbreaker and a 0.2 mm corner radius make the insert particularly well suited to continuous cutting and small depth-of-cut finishing operations where low cutting forces and fine surface finish are priorities. The through-hole design with a cylindrical hole and single-side countersink (40°–60°) provides reliable mechanical clamping and fast index changes. Use of this insert in finishing passes lowers vibration sensitivity and allows stable feeds at modest depths, giving a predictable trade-off between surface finish and tool life. The insert is intended for turning applications, both external and internal, where surface quality is decisive. Contact Metav Werkzeuge today for tailored recommendations and availability of Tungaloy turning inserts including TPGT 130302 NS9530 — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and lead-time information Technical data Article number: 6997961 Manufacturer SKU: TUN6997961 Model series: ISO turning indexable inserts Cutting material: uncoated cermet NS9530 Substrate material: carbide Facts Inscribed circle: 13 mm Thickness: 3.18 mm Included angle: 60° Relief angle: 11° Corner radius: 0.2 mm Special features Triangular insert form With hole Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Intended application: turning Typical use: external and internal turning Compatibility determined by form, relief angle, tolerance, attachment, size and thickness FAQ Is this insert suitable for finishing steel components? Yes. The NS9530 uncoated cermet grade is a finishing sort designed for steel, providing a sharp cutting edge, low cutting forces and improved surface finish for continuous cutting and small depths of cut. What geometry features affect machining performance? The triangular form with a 60° included angle, 0.2 mm corner radius and 11° relief angle combine to reduce cutting forces and vibration, supporting high-quality surface finishes in finishing passes. Which toolholders are compatible with this insert? Compatibility depends on the holder’s seat form, relief angle, tolerance class, attachment and size; choose an ISO-compatible external or internal turning holder that matches the insert’s 13 mm inscribed circle and 3.18 mm thickness. Can the insert be used for internal turning operations? Yes. The insert is suitable for both external and internal turning applications when mounted in an appropriate holder and clamping system. How is the insert fixed in the holder? The insert features a through hole and a cylindrical hole with a single-side countersink (40°–60°) to enable secure mechanical clamping and straightforward indexing; reference SKU TUN6997961 for exact fitment details. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130302 NS9530 Wendeplatten - Tungaloy
High-precision finishing performance with an uncoated NS9530 cermet grade and a fine 0.2 mm nose radius produces consistently superior surface quality and low cutting forces; combined with the ISO 130302 triangular 60° form this insert delivers reliable seating and repeatable results in turning operations. Order directly via Metav Werkzeuge or request application advice from our consultants. TPGT130302 NS9530 — TPGT indexable turning insert, 60° triangular, uncoated cermet by Tungaloy The TPGT130302 NS9530 is an ISO triangular turning insert designed for finishing steel, offering a sharp cutting edge and low cutting forces for continuous cuts and fine surface finish. Uncoated NS9530 cermet finishing grade 60° triangular ISO 130302 form 0.2 mm nose radius for fine finish Central hole with single-side countersink Precise finishing for steel components with low cutting forces The uncoated cermet grade delivers a sharp cutting edge and stable cutting behaviour that is optimised for finishing passes on steel. The combination of NS9530 grade and the fine 0.2 mm nose radius reduces ploughing and minimises built-up edge, which results in consistently improved surface finish and dimensional conformity. This makes the insert particularly suitable where small depths of cut and continuous turning are required; the geometry reduces cutting forces, which benefits thin-walled parts and setups with lower rigidity. The insert’s substrate and edge form ensure predictable wear progression, supporting cycle-time stability on production runs. Secure clamping and ISO compatibility for repeatable results The triangular 60° geometry and ISO designation ensure compatibility with standard holders when the form, relief angle, tolerance class, fixing method, size and thickness are matched. The insert features a cylindrical hole with one‑side countersink (40°–60°) for secure location and repeatable seating, plus a plate thickness of 3.18 mm that contributes to rigidity in the clamping system. With a 11° relief angle and standard ISO dimensions, the plate integrates into typical external holders or boring bars together with the required shim/clip and replacement screws, delivering consistent cutting orientation and repeatable part outcomes across batches. Geometry and chip control tuned for continuous cutting and fine surfaces A single‑side chipbreaker combined with the sharp edge profile supports controlled chip formation during finishing operations, reducing the risk of surface marks and facilitating stable tool life. The plate’s triangular shape (ISO 130302) and precise corner radius positioning enable multiple indexed corners for economic usage while maintaining edge quality. For shops seeking process reliability, the uncoated grade reduces the variability associated with coatings in fine finishing, allowing predictable tool behaviour and easier re-sharpening or replacement strategies. Selection of matching holder style and correct feed parameters will exploit the insert’s benefits in repetitive production environments. For finishing-focused turning operations using Tungaloy technology, contact Metav Werkzeuge for tailored application advice and to obtain the TPGT130302 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance Technical data Article number: 6997993 Manufacturer SKU: TUN6997993 Model series: ISO indexable turning inserts Material: cemented carbide Grade: NS9530 Manufacturer article number: 6997993 Facts Plate designation: ISO 130302 Shape: triangular 60° Plate size: 13 mm Thickness: 3.18 mm Nose radius: 0.2 mm Relief angle: 11° Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑side Design & features Uncoated cermet finishing grade NS9530 Sharp cutting edge for low cutting forces Intended application: turning (finishing) Compatible system setup: ISO insert + matching external holder or boring bar + shim/clip + replacement screws Multiple indexed corners for cost efficiency FAQ What materials is this insert suitable for? The TPGT130302 NS9530 insert is formulated as a finishing grade for steel; the uncoated NS9530 cermet delivers low cutting forces and high surface quality in continuous turning of steel components. How does the hole and countersink affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures positive location and reliable clamping in compatible ISO holders, contributing to the repeatability expected from the TPGT130302 NS9530 insert (SKU TUN6997993). Which operations benefit most from this grade and geometry? Finishing operations with small depths of cut and continuous feed benefit most: the sharp edge and 0.2 mm nose radius reduce surface roughness and cutting forces, supporting precision external and internal turning tasks. Can the insert be indexed for multiple corners? Yes, the triangular geometry and ISO 130302 designation allow multiple corner indexing for extended usable life while maintaining the finishing edge quality provided by the NS9530 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130302 TH10 Wendeplatten - Tungaloy
Benefit from ISO conformity, a sharp uncoated carbide grade and a compact triangular geometry for consistent turning performance; ideal where low cutting forces and clean surfaces are required. Order the TPGT130302 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT130302 TH10 Tungaloy — ISO triangular turning insert, 11° relief The TPGT130302 TH10 Tungaloy is an ISO‑standard triangular indexable insert for external and internal turning, optimised for non‑ferrous materials and applications requiring a sharp, uncoated cutting edge. ISO‑compliant triangular form for broad compatibility Uncoated carbide TH10 for low cutting forces 13 mm diameter with 3.18 mm thickness 11° relief and 0.2 mm corner radius Reliable fit and fast integration for machining centres The ISO conformity of this insert ensures repeatable positioning in standard toolholders: ISO designation governs the form, the relief angle, tolerance class, fastening and plate thickness so that the component seats and repeats reliably. Compatibility with an external holder or a boring bar is determined by these parameters, which simplifies tool inventory and reduces setup time. Where tool change frequency or process stability matter, the standardised geometry reduces indexing errors and shortens machine downtime. Cleaner surfaces with a sharp, uncoated universal grade The uncoated TH10 grade is a sharp, universal uncoated carbide designed to produce low cutting forces and fine surface finishes when machining non‑ferrous materials. The single‑sided chipbreaker assists in forming controllable chips and prevents unwanted rubbing at the cutting edge, which supports consistent part quality and reduces rework. For applications where coating could blunt the edge or where thermal load is moderate, the uncoated cutting edge provides a reliable compromise between edge sharpness and wear resistance. Secure clamping and robust geometry for repeatable cuts The triangular shape with a 13 mm size and 60° included angle offers stable seating and multiple indexing positions, while the 0.2 mm corner radius balances edge strength and surface quality. The 11° relief reduces flank contact and consequently cutting resistance, and the 3.18 mm plate thickness contributes to stiffness under load. The insert comes with hole—a cylindrical hole plus a one‑sided countersink (40°–60°)—which facilitates accurate alignment and secure clamping in standard clamping assemblies, improving repeatability across batch runs. Practical applications and measurable productivity gains Designed primarily for turning (external and internal), this insert is suited to machining non‑ferrous alloys such as Messing, aluminium and a range of engineering plastics where a sharp edge and low forces are an advantage. Selecting the appropriate chipbreaker and the TH10 grade according to workpiece material and cut depth helps to increase material removal rates while maintaining surface integrity. The combination of standard geometry and a focused grade supports efficient production workflows and predictable tool‑change scheduling, contributing to lower overall machining costs. For procurement and technical advice on Tungaloy TH10 inserts, contact Metav Werkzeuge for availability and application support via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number / SKU: 6808938-Tungaloy Manufacturer article number: 6808938 Manufacturer SKU: TUN6808938 Model series: ISO‑Drehwendeschneidplatten Brand: Tungaloy Measurements Plate size: 13 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Design & features Material: Hartmetall Grade: TH10 (uncoated) Chipbreaker: einseitig (single‑sided) Hole: mit Loch — cylindrical hole + one‑sided countersink (40°–60°) Shape: dreieckig Application: Drehen (external and internal turning) FAQ Is this insert suitable for steel machining? This insert and the TH10 grade are optimised for non‑ferrous materials; for steel machining, a coated carbide or a grade specified for steel is recommended instead of the TPGT130302 TH10. Which holders are compatible with the insert? Compatibility is determined by the ISO form, relief angle (11°), tolerance class, fastening method, plate size (13 mm) and thickness (3.18 mm); matching the insert to a holder with corresponding ISO seating ensures correct fit. How does the single‑sided chipbreaker affect chip formation? The single‑sided chipbreaker on this insert promotes controlled chip formation for many non‑ferrous materials, which supports stable evacuation and reduces the risk of chip re‑welding or surface damage during turning. Can the insert be used for internal turning (boring)? Yes, the triangular indexable insert is suitable for both external and internal turning when paired with an appropriate boring bar or internal holder designed for the ISO plate form. What are the benefits of the uncoated TH10 grade? The TH10 uncoated carbide provides a very sharp cutting edge with lower cutting forces and generally improved surface finish on non‑ferrous materials compared with blunter or coated alternatives. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 130304 GH110 Wendeplatten - Tungaloy
Benefit from the combination of ISO conformity, the GH110 Tungaloy carbide grade and compact geometry for dependable external and internal turning. Order the insert directly via Metav Werkzeuge or ask their consultants for application advice. TPGT 130304 GH110 — ISO triangular indexable turning insert by Tungaloy, for turning The TPGT 130304 GH110 is an ISO-standard triangular indexable insert designed for precise external and internal turning; compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness ISO-standard triangular insert TPGT GH110 Tungaloy carbide grade 11° clearance; 0.4 mm corner radius Cylindrical hole with single-side countersink Consistent performance across common turning tasks The ISO triangular geometry ensures predictable cutting behaviour in a wide range of turning operations. The standardised form and size mean straightforward interchangeability with compatible holders when the form, clearance angle and tolerance class match. The compact construction, with a 13 mm inscribed circle and 3.18 mm thickness, supports both external and internal turning while maintaining stable seating and repeatable indexing. Such dimensional consistency reduces setup time and helps maintain process stability in batch production. Longer cutting life and controlled chip formation with GH110 The GH110 grade, developed by Tungaloy, balances wear resistance and toughness to keep the cutting edge stable under varying cutting conditions. Combined with a dedicated chipbreaker on one side, the insert promotes controlled chip flow and improved surface finish in common turning tasks. The use of carbide substrate allows the edge to withstand intermittent cuts and moderate engagement, translating into fewer tool changes and higher machine uptime. Secure clamping and straightforward indexing for reliable processes The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure precise seating and secure fastening in the clamping assembly. This configuration supports reliable indexing and repeatability when replacing worn corners, which helps to reduce non-productive time. The 11° clearance angle contributes to reduced rubbing on the flank face, lowering heat generation and promoting consistent surface quality during finishing passes. For a production-proven turning solution, choose the Tungaloy GH110 insert and contact Metav Werkzeuge for tailored technical advice and ordering via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6808951 Manufacturer SKU: TUN6808951 Model series: ISO turning indexable inserts Material: carbide Item name: TPGT130304 GH110 indexable insert Core dimensions Inscribed circle: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Design & features Triangular insert shape With cylindrical hole and single-side countersink (40°–60°) One-sided chipbreaker Carbide grade: GH110 (Tungaloy) Intended application: turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What turning tasks is this insert intended for? The insert is intended for external and internal turning applications; the GH110 grade and triangular geometry suit a broad range of standard turning operations. How does the GH110 grade affect tool life? GH110, a Tungaloy carbide grade, combines wear resistance and toughness to provide a balance between edge stability and longevity under typical turning conditions. What does the countersink in the hole do? The cylindrical hole with a single-side countersink (40°–60°) ensures correct seating and secure clamping, supporting repeatable indexing and stable cutting performance. Can the insert be used in any holder? Compatibility depends on matching the holder form, clearance angle, tolerance class, fastening method, size and thickness; verify these parameters with the holder specifications before use. What benefit does the 0.4 mm radius provide? The 0.4 mm corner radius offers a compromise between strength and finish capability, improving edge robustness while allowing good surface quality in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 wear resistance, precise 60° triangular geometry and straightforward ISO compatibility for reliable turning performance; order or request advice via Metav Werkzeuge for matching holders and delivery options. TPGT130304 GH110 Tungaloy turning insert — ISO triangular indexable insert for turning A TPGT130304 GH110 Tungaloy turning insert engineered for ISO-compliant external and internal turning, combining a triangular 60° form with a balanced grade for durability and edge stability. Triangle 60° form for general turning GH110 Tungaloy grade for wear resistance 0.4 mm corner radius for versatile edge strength With cylindrical hole and 40°–60° countersink Consistent tool life through targeted grade selection The GH110 Tungaloy grade, applied to a cemented carbide substrate, provides a measured balance between wear resistance and toughness that supports stable chip formation and longer edge life. For production environments where tool-change intervals affect throughput, this insert reduces unplanned downtime by delivering repeatable wear behaviour. The design is optimised to work with appropriate chipbreakers and cutting geometries, helping to maintain component quality across longer production runs while keeping maintenance predictable. Precise geometry and ISO compatibility for simple integration The triangular shape with a 60° included angle and an 11° relief angle ensures robust engagement in a wide range of turning operations. With a plate size of 13 mm, a plate thickness of 3.18 mm, and a 0.4 mm corner radius, the insert fits ISO-standard toolholders where form, relief angle, tolerance class, fastening and thickness determine compatibility. The centre hole is supplied as a cylindrical bore with a single‑side countersink (40°–60°), facilitating secure clamping and repeatable locating in standard clamping systems and reducing set-up time at the machine. Application focus: efficient turning and easy system setup Designed for both external and internal turning, the insert features a one‑sided chipbreaker that should be matched to the workpiece material and machining stability to obtain the best surface finish and chip control. The modest corner radius helps to balance edge strength and finishing capability for diverse workpieces. The overall system—indexable insert, matching external holder or boring bar, shim/clamping set and spare screws—allows straightforward replacement and minimal machine downtime. Our technical team can advise on selecting the correct chipbreaker and holder combination for specific applications. Contact Metav Werkzeuge today for tailored advice on holder matching and availability of the TPGT130304 GH110 Tungaloy inserts and to discuss delivery options and compatible tooling setups Technical data Article number: 6808945 Manufacturer article number: 6808945 SKU: 6808945-Tungaloy Manufacturer SKU: TUN6808945 Designation: TPGT130304 GH110 Tungaloy Facts Corner radius: 0.4 mm Included angle: 60° Relief angle: 11° Plate size: 13 mm Plate thickness: 3.18 mm Special features Triangular shape, 60° included angle One-sided chipbreaker With cylindrical hole and single-sided countersink (40°–60°) Grade GH110 (Tungaloy) Material: cemented carbide For external and internal turning System components: ISO insert, holder/boring bar, shim/clamp set, spare screws FAQ Which turning operations is this insert suited for? The TPGT130304 GH110 Tungaloy turning insert is intended for both external and internal turning; it performs well where a triangular 60° geometry and a 0.4 mm corner radius provide the required balance between edge strength and finish. How is compatibility with toolholders ensured? Compatibility depends on the insert form, relief angle, tolerance class, fastening, size and thickness; for the TPGT130304 GH110 insert, holders and boring bars designed for ISO triangular inserts with the stated dimensions will be suitable. What does the GH110 grade mean in practice? GH110 denotes a Tungaloy cutting grade engineered to combine wear resistance and toughness; in practice, the GH110 grade supports stable chip formation and consistent tool life under turning conditions when paired with the correct chipbreaker. Can the insert be used for high‑feed or heavy‑duty cuts? The insert’s 0.4 mm corner radius and carbide substrate offer good robustness, but the suitability for high‑feed or heavy‑duty cuts depends on the chosen holder rigidity, clamping and machining parameters; match the chipbreaker and holder to the operation for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑standard triangular format, the GH330 Tungaloy grade and a robust carbide substrate for consistent turning performance; compatible with standard ISO holders, the insert supports productive external and internal turning while offering wear resistance and edge stability. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPGT 130304 GH330 — Tungaloy ISO turning insert for external and internal turning The TPGT130304 GH330 is a triangular ISO turning insert designed for general turning operations, offering a balanced mix of wear resistance and toughness for a wide range of workpiece materials. ISO triangular format TPGT130304 GH330 Tungaloy wear‑resistant grade 11° relief angle for stable cutting 0.4 mm corner radius for edge strength Improved productivity through grade and geometry The combination of the GH330 cutting grade and a carbide substrate provides a reliable balance between wear resistance and toughness, which translates into longer tool life and fewer interruptions in production. The ISO geometry of the insert ensures predictable performance in a variety of turning tasks; selecting the correct chipbreaker and grade helps to match the insert to the workpiece and machining conditions, reducing cycle times and improving repeatability. For operations where a consistent cutting edge is required, the grade’s composition supports stable chip formation and resistance to abrasive wear. Precise geometry for repeatable results Designed as a triangular insert, the TPGT130304 features an included angle of 60°, a 0.4 mm corner radius and a 3.18 mm thickness, dimensions that contribute to edge strength and positional stability in the clamping system. The 11° relief angle reduces rubbing at the flank while maintaining cutting support, which helps to produce consistent surface finish and dimensional control. These geometric parameters make the insert particularly suitable for finishing to medium‑roughing passes where a controlled contact area and predictable tool deflection are important. Secure mounting and system compatibility Compatibility with a given holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. This indexable insert is supplied with a cylindrical hole and a single‑sided countersink (40°–60°), enabling secure clamping in standard ISO holders and boring bars. The hole style and precise tolerances assist in repeatable seating and clamping, which reduces setup time and improves positional accuracy across multiple tool changes. When integrating this insert into a tool system, ensure the chosen holder matches the ISO form and fastening specifications. Application range and handling guidance Intended for turning operations, the insert’s single‑sided chipbreaker is optimised for controlled chip formation in many machining scenarios. While the TPGT130304 GH330 performs well across a variety of steels and alloyed materials, selecting the appropriate chipbreaker and cutting parameters for the specific workpiece increases efficiency and prolongs insert life. For unfamiliar applications or when machining abrasive or hard materials, consult process data sheets or Metav Werkzeuge’s technical advisors to determine optimal speeds, feeds and depth of cut for safe and productive machining. Contact Metav Werkzeuge for tailored application advice and to secure the appropriate Tungaloy inserts for the intended turning tasks — our consultants are available to assist with selection and compatibility checks. Technical data Manufacturer article number: 6808953 Manufacturer SKU: TUN6808953 SKU: 6808953-Tungaloy Model series: ISO indexable turning inserts Facts Insert designation: TPGT130304 Inscribed circle: 13 mm Thickness: 3.18 mm Relief angle: 11° Corner radius: 0.4 mm Included angle: 60° Special features Grade: GH330 (Tungaloy) Substrate: carbide Shape: triangular Hole style: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: Turning FAQ What turning tasks is this insert suited for? The TPGT130304 GH330 insert is designed for external and internal turning operations; its geometry and grade allow use from finishing to medium‑roughing depending on cutting parameters. How does the GH330 grade influence tool life? GH330 provides a combination of wear resistance and edge stability, so the insert maintains a cutting edge under continuous operation and supports longer intervals between indexings. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and thickness; the insert’s cylindrical hole with countersink enables secure clamping in standard ISO holders designed for TPGT‑style inserts. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping, making it suitable for slightly heavier cuts while still allowing a fine surface finish. Is this insert ready to use out of the box? Yes — the insert is supplied in the specified ISO geometry and hole style; correct seating and torque on the clamping screw are essential for repeatable performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 130304 GH330 Wendeplatten - Tungaloy
The combination of ISO compatibility, GH330 cutting grade and robust carbide construction ensures dependable performance for external and internal turning tasks; select the matching chipbreaker and holder form for optimal results. Order directly via Metav Werkzeuge or consult the technical team for application advice. TPGT 130304 GH330 turning insert — ISO triangular 60° insert by Tungaloy The TPGT130304 GH330 is an ISO-standard triangular turning insert designed for general external and internal turning operations where edge stability and wear resistance are required. ISO triangular 60° geometry GH330 grade carbide substrate 0.4 mm corner radius 11° clearance angle Consistent cutting performance from a wear-resistant grade The GH330 specification combines wear resistance and toughness to give a predictable tool life when machining a wide range of materials. Manufactured in carbide, the insert delivers stable cutting edges that support repeatable turning cycles and reduced downtime for tool changes. The 60° triangular form provides three usable cutting corners, improving cost-efficiency per insert while maintaining consistent chip formation under moderate to stable machining conditions. Mounting and compatibility for secure clamping Compatibility with toolholders is determined by the insert’s form, 11° clearance angle, tolerance class, fastening method, size and thickness. The insert sits on a matching ISO holder or boring bar and is secured using the central mounting arrangement; this variant features a cylindrical hole with a single-side countersink (40°–60°) to ensure accurate seating and repeatable clamping. Correct holder selection and correct torque on the clamping screw together ensure reliable performance and reduced vibration during turning. Geometry and chip control tuned to process stability With a 0.4 mm corner radius, 3.18 mm thickness and a one-sided chipbreaker, the geometry is balanced for general finishing and medium-duty roughing operations. The chipbreaker design promotes manageable chip flows and reduces edge loading, which helps maintain surface quality and protects the cutting edge. Where higher stability or interrupted cuts are involved, choosing the appropriate chipbreaker form and a more stable clamping arrangement enhances overall process reliability. Application guidance and system setup This insert is intended for turning; typical system setup comprises the ISO insert, a compatible external holder or boring bar, a locating pad or clamping kit and replacement screws as required. Select the chipbreaker and the GH330 grade to match the workpiece material and the machining strategy—whether finishing, semi-finishing or light roughing—to balance wear resistance and toughness for longer tool life and consistent surface finish. For application support or to order original Tungaloy inserts like the TPGT130304 GH330, contact Metav Werkzeuge for tailored advice and fast availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6808946 Manufacturer article number: 6808946 Manufacturer SKU: TUN6808946 Label / SKU: 6808946-Tungaloy Facts Included angle: 60° Corner radius: 0.4 mm Thickness: 3.18 mm Size (inscribed circle): 13 mm Clearance angle: 11° Special features Carbide substrate ISO designation TPGT130304 Triangular plate shape Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Designed for external and internal turning Grade GH330 by Tungaloy Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials can this insert machine effectively? The GH330 grade insert is designed as a general-purpose carbide option; the TPGT130304 GH330 insert is suitable for a broad range of materials when the correct chipbreaker and machining parameters are chosen. How many cutting edges are available on this triangular insert? A triangular insert of this geometry provides three usable cutting edges; rotating to the next corner restores a fresh cutting edge without changing the insert. What is the purpose of the countersunk mounting hole? The cylindrical hole with a single-side countersink (40°–60°) ensures accurate seating and repeatable clamping in compatible ISO holders, improving stability during turning. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius offers a good compromise between edge strength and surface finish, making the insert appropriate for finishing and light to medium stock removal. How should the holder be selected for best results? Choose an ISO holder whose form, tolerance class, fastening and dimensions match the insert; correct holder selection together with the GH330 grade and suitable chipbreaker optimises process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade and a finely honed 0.4 mm corner radius delivers reliable finishes and extended tool life in stable turning operations. Order this insert directly via Metav Werkzeuge or consult the technical team for grade and holder compatibility. TPGT 130304 GT9530 Turning insert by Tungaloy — ISO triangular insert for turning, coated cermet TPGT130304 GT9530 is a compact ISO triangular turning insert designed for external and internal turning, optimised for finishing and light universal steel applications. Coated cermet GT9530 for extended life 60° triangular geometry for versatile turning 0.4 mm corner radius for fine surface finishes Compatible with ISO turning holders Reliable finishes and longer tool life from GT9530 The coated cermet grade GT9530 is formulated for wear resistance and a stable cutting edge, making it suited to finishing and light universal turning in steel where surface quality and run time matter. The combination of a specific chipbreaker and a hard-wearing cermet coating produces consistent chip control and reduces flank wear, which in turn supports longer intervals between insert changes. In practice, this means fewer interruptions to production and a predictable part finish when machining under steady, well-supported conditions. Secure seating and predictable clamping for consistent results Compatibility with the toolholder is determined by geometry, clearance angle, tolerance class, attachment method, size and thickness. The insert’s triangular shape with a 60° included angle and a 0.4 mm corner radius provides predictable engagement with standard ISO holders. The central cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and repeatable seating, lowering the risk of movement under load and helping to maintain part tolerances across batches. Practical selection and machining guidance The substrate of cemented carbide and the GT9530 coating make this insert a choice for users aiming for improved surface finish and longer tool life in stable setups. For rougher or interrupted cutting, a more robust grade may be preferable; for finishing, the single-sided chipbreaker and 11° clearance angle support smooth shearing and low built-up edge. When selecting parameters, consider stable workholding and appropriate feeds to exploit the insert’s strengths: modest feedrates and correct depth of cut will enhance surface integrity and tool longevity. For application advice, availability or to order the TPGT 130304 GT9530 insert, contact Metav Werkzeuge for expert consultation and fast dispatch via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6997886-Tungaloy Manufacturer article number: 6997886 Manufacturer SKU: TUN6997886 Model series: ISO-Drehwendeschneidplatten Core measurements Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Plate thickness: 3.18 mm Plate size: 13 mm Countersink angle: 40°–60° Materials & features Grade: GT9530 Cutting material: coated cermet Substrate: cemented carbide Shape: triangular Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Application: Turning (external and internal), finishing to light universal steel FAQ What applications suit this insert best? The GT9530-coated triangular insert is intended for finishing and light universal turning of steel, delivering good surface quality and extended life under stable machining conditions. How does the insert secure to the holder? The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure clamping; compatibility depends on holder form, clearance angle, tolerance class, attachment and size. Which materials can be machined with this grade? This insert’s coated cermet grade is optimised for steel machining where a fine surface finish and wear resistance are required. What are the key dimensional values to check before fitting? Verify the 0.4 mm corner radius, 11° clearance angle, plate thickness of 3.18 mm and the 13 mm plate size against the holder specifications for correct fit and repeatability. Can the insert be used for internal turning? Yes, the geometry and chip control make it suitable for both external and internal turning, provided appropriate holder selection and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of wear‑resistant coated cermet, consistent surface finish and ISO‑compatible triangular geometry for productive turning operations. Order the Tungaloy insert directly via Metav Werkzeuge or request guidance from our consultants. TPGT 130304 GT9530 Tungaloy turning insert – 60° triangular, coated cermet TPGT 130304 GT9530 is an ISO‑pattern triangular indexable insert designed for finishing to light general‑purpose turning applications where surface quality and tool life are priorities Coated cermet grade GT9530 60° triangular geometry 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Achieve consistent finishes and extended tool life with coated cermet The triangular indexable insert delivers a balance between surface quality and wear resistance thanks to the GT9530 coated cermet grade. The microstructure and coating are optimised for finishing and light universal turning of steel, providing longer life under stable machining conditions. The 60° geometry and 0.4 mm corner radius enable precise profile control and reliable edge strength, reducing rework and improving first‑pass yields. By favouring finish cuts and stable set‑ups, the user benefits from fewer tool changes and a predictable process window, which supports tighter production scheduling. System compatibility and secure clamping for repeatable results Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, attachment method, size and thickness; this indexable insert conforms to ISO dimensions for straightforward integration. The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and repeatable seating in matched external holders or boring bars. With a plate thickness of 3.18 mm and standard triangular shape, the insert offers consistent reference planes for quick indexing and minimal setup variation. Selecting the correct holder geometry and clamp torque reduces vibration and preserves the edge, supporting steady surface finish and dimensional accuracy. Process reliability through targeted chip control and grade selection A one‑sided chipbreaker paired with the coated cermet composition provides controlled chip formation during finishing cuts, lowering the risk of built‑up edge and thermal wear. The GT9530 grade is formulated for stable conditions, where rigidity and consistent feeds allow the coating to extend service life while maintaining a fine surface. Choosing the appropriate chipbreaker and machining parameters aligns tool capability with workpiece material and machine stability, resulting in predictable tool change intervals and improved machining economics. For complex parts or mixed materials, consideration of alternative grades and chipbreakers is recommended to match the specific cutting environment. Contact Metav Werkzeuge to source Tungaloy GT9530 inserts, discuss holder compatibility and obtain tailored recommendations for cutting parameters and grade selection Technical data Article number: 6997876 Manufacturer SKU: TUN6997876 SKU: 6997876-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TPGT130304 GT9530 Tungaloy-Wendeplatte Core specifications Geometry angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 13 mm Materials & special features Grade: GT9530, coated cermet Chipbreaker: one‑sided Plate shape: triangular Hole style: cylindrical hole + one‑sided countersink (40°–60°) Typical application: turning (external and internal) Compatibility criteria: form, clearance, tolerance, fastening, size, thickness Suitable for: steel; optimised for finishing to light universal work under stable conditions FAQ What materials is this insert best suited for? The TPGT130304 GT9530 Tungaloy insert is optimised for turning steel, delivering wear‑resistant performance and improved surface finish in finishing to light universal applications. How does the hole and countersink affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) on the TPGT130304 GT9530 ensures secure seating and repeatable clamping in compatible ISO holders, reducing movement and enhancing repeatability. Which holder and chipbreaker should be chosen for best results? Select a holder that matches ISO triangular insert form and provides sufficient rigidity; pair the insert with the one‑sided chipbreaker for controlled chips in finish cuts and stable cutting conditions. Is the GT9530 grade suitable for interrupted cuts or unstable set‑ups? GT9530 is designed for wear resistance and good surface quality under stable machining conditions; for heavily interrupted cuts or low rigidity, consider more robust grades or different chipbreaker geometries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, robust cemented carbide construction and ISO compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for advice. TPGT 130304 NS520 Tungaloy — ISO triangular turning insert for finishing, 60° included angle The TPGT 130304 NS520 is an ISO-standard triangular turning insert designed for finishing to light turning of steel, providing consistent surface quality and dimensional accuracy. Cermet grade NS520 for fine finishing Triangular 60° form, 0.4 mm nose radius With cylindrical hole and single-side countersink ISO-standard 3.18 mm plate thickness Precision surface quality for finishing operations The Tungaloy insert delivers a focus on surface finish and repeatable part tolerances through its cermet-based grade. Its NS520 composition, engineered for finishing to light machining, promotes stable, even wear and reduces micro-chipping, which together support consistent meeting of tolerance bands and improved component appearance. This is especially useful for applications where enhanced dimensional accuracy and a superior surface are required after roughing. The insert’s geometry and the single-sided chipbreaker further aid controlled chip flow, minimising surface defects. Secure seating and universal ISO compatibility The triangular 60° form and standard ISO geometry ensure compatibility with a wide range of external holders and boring bars; the insert’s fit is determined by form, relief angle, tolerance class, attachment style, size and thickness. The 11° relief angle and 3.18 mm plate thickness provide a stable clamp under moderate cutting forces, while the cylindrical hole with one-sided countersink (40°–60°) enables reliable fixation and repeatable indexing. These characteristics reduce set-up time and support uninterrupted production runs when using matched holders. Material advantages of the NS520 cermet grade The cermet NS520 is optimised for steels where the priority is an outstanding finished surface and uniform wear behaviour rather than aggressive metal removal rates. By combining the toughness of cemented carbide with cermet surface properties, this grade maintains a sharp cutting edge for longer in finishing passes, delivering improved micrometre-level accuracy and consistent part-to-part quality. For shops aiming for high first-pass yields in precision turning, this insert helps reduce rework and improve throughput. Application guidance and process stability Intended primarily for external and internal turning in finishing to light-duty cuts, the insert is most effective when paired with the correct holder rigidity, stable clamping and well-tuned cutting parameters. The 0.4 mm nose radius supports fine profile control and a good balance between edge strength and surface integrity. Where process reliability is required, select the chipbreaker and grade match to the workpiece material and machining stability; this approach maximises tool life and maintains consistent component quality across batch production. For consistent finishing performance choose the Tungaloy NS520 inserts and contact Metav Werkzeuge for specific holder compatibility or to request the TUN6808942 item—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details Technical Data Manufacturer item no.: 6808942 SKU: 6808942-Tungaloy Manufacturer SKU: TUN6808942 Facts Plate size: 13 mm Thickness: 3.18 mm Nose radius: 0.4 mm Relief angle / free angle: 11° Included angle: 60° Special features Material: cemented carbide Grade/coating: NS520 (cermet / coated cermet) Plate form: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (finishing to light machining) Model series: ISO turning inserts Compatible with ISO-standard external holders and boring bars FAQ What materials is this insert suited for? The NS520 cermet grade is formulated primarily for the finishing to light machining of steel, so the TPGT 130304 NS520 insert is recommended where a high-quality surface finish and dimensional accuracy are required. Which geometry does the insert have and what does it mean for applications? The insert uses a triangular 60° geometry with a 0.4 mm nose radius and 11° relief angle, providing stable seating and fine-profile control suitable for finishing passes in turning operations. How is the insert clamped and indexed in a holder? The insert is supplied with a cylindrical hole and single-side countersink (40°–60°), allowing secure clamping and repeatable indexing when used with compatible ISO-standard holders. What advantages does the NS520 grade provide compared with conventional carbide? NS520, a cermet-based grade, offers a sharper, more wear-resistant cutting edge in finishing, promoting uniform flank wear and improved surface integrity across production runs. Is this insert suitable for internal as well as external turning? Yes, the insert’s ISO-standard form and single-sided chipbreaker make it suitable for both external and internal turning operations in finishing to light machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 NS9530 Wendeplatten - Tungaloy
Combine the precision of the uncoated NS9530 cermet grade with ISO compatibility, a 0.4 mm nose radius and an 11° relief for dependable finishing of steel components. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TPGT130304 NS9530 Tungaloy turning insert — triangular, 0.4 mm radius, 11° clearance The TPGT130304 NS9530 is an ISO-standard triangular turning insert designed for finishing operations on steel, providing a sharp cutting edge, low cutting forces and excellent surface quality. ISO triangular profile TPGT130304 Uncoated cermet grade NS9530 Sharp cutting edge for fine surface 0.4 mm nose radius and 11° clearance Precision finishing for steel components The TPGT130304 NS9530 is manufactured in an uncoated cermet grade optimised for finishing on steel. The NS9530 composition delivers a sharp cutting edge and low cutting forces, which reduces tool deflection and supports consistent high surface quality during continuous cuts and small depths of cut. The result is improved dimensional accuracy and surface integrity in final passes, making this insert suitable where consistent finishes and reduced rework are required. ISO compatibility and straightforward system integration Conforming to ISO geometry, the insert is compatible with holders that match form, clearance, tolerance class, fastening, size and thickness. The tool system comprises the indexable plate plus a suitable outer holder or boring bar, a shim/clamping set and replacement screws. Standardised fitment reduces set-up time and simplifies stock management, so tool changes and reorders can be completed with minimal interruption to production. Geometry that stabilises cuts and controls chips The triangular shape with a 60° included angle, a 0.4 mm nose radius and an 11° relief angle balances edge strength and finishing capability. A single-sided chipbreaker supports predictable chip formation for continuous cutting, while the cylindrical hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping. Plate thickness 3.18 mm and size 13 yield the rigidity needed for repeatable seating and consistent surface results. Practical machining guidance and expected benefits Intended for external and internal turning, the insert excels in finishing passes where small depths and steady cutting conditions prevail. As an uncoated finishing grade, it delivers a finishing performance that reduces the risk of burrs and improves surface finish without the higher cutting forces of roughing grades. The predictable behaviour of this grade contributes to reduced inspection frequency and steadier cycle times on the shop floor, supporting efficient and reproducible production processes. Contact Metav Werkzeuge for application advice on the Tungaloy finishing insert, or request specific cutting data via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6997984 Manufacturer SKU: TUN6997984 SKU: 6997984-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPGT130304 NS9530 Tungaloy turning insert Facts Nose radius: 0.4 mm Plate thickness: 3.18 mm Size: 13 Included angle: 60° Clearance angle: 11° Hole: cylindrical + one-sided countersink (40°–60°) Special features Grade/coating: uncoated cermet NS9530 Shape: triangular (TPGT) Chipbreaker: single-sided Application: external and internal turning System components: ISO insert, suitable holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The TPGT130304 NS9530 insert is formulated as a finishing grade for steel, offering low cutting forces and improved surface finish when machining continuous cuts and small depths. Which turning operations are recommended for this insert? It is intended for external and internal turning operations, particularly finishing passes where steady cutting conditions and small depths of cut are used. How is compatibility with toolholders ensured? Compatibility is ensured by matching the insert form, clearance angle, tolerance class, fastening method, size and thickness so that the plate seats and clamps correctly in the holder. What chip control can be expected from the insert? The single-sided chipbreaker promotes controlled chip formation during continuous cutting, supporting consistent surface quality and reduced risk of edge loading. Are there special mounting requirements for the hole and countersink? The cylindrical hole with a one-sided countersink (40°–60°) requires the correct shim/clamping set and replacement screws to achieve stable axial and radial support when clamped. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet NS9530 grade, a fine 0.4 mm corner radius and ISO compatibility for consistent finish turning; order directly via Metav Werkzeuge or ask the technical consultants for application advice. TPGT 130304 NS9530 ISO turning insert — triangle 60° for finishing TPGT 130304 NS9530 is an ISO triangular turning insert intended for finishing operations on steel, offering a sharp cutting edge and a geometry optimised for continuous cuts. Triangle ISO insert, 60° included angle Uncoated cermet finishing grade NS9530 0.4 mm corner radius for fine surface finish Cylindrical hole with single-sided 40°–60° countersink Consistent high-quality surface finish with low cutting forces The insert is manufactured as a uncoated cermet finishing grade (NS9530), providing a sharp cutting edge that reduces cutting forces and vibration during light finishing passes. This combination results in improved surface finish and repeatable part quality when machining steel under continuous cutting conditions. The 0.4 mm corner radius helps to balance edge strength with the ability to produce fine surface textures; for small depths of cut the smaller radius minimises tool marks while maintaining edge integrity. Where a high degree of dimensional accuracy and low burr formation are required, this geometry supports stable machining and reduced rework. Reliable chip control and secure clamping for stable turning Designed with a one-sided chipbreaker, the insert promotes controlled chip formation in finishing cuts, which is advantageous when processing long, hot or ductile swarf. The geometry includes an 11° clearance and a 60° included angle, which together aid in maintaining an accurate cutting edge position and minimising rubbing at the flank. Mechanical retention is ensured by a cylindrical hole with a single-sided 40°–60° countersink, compatible with standard ISO triangular holders; the plate thickness of 3.18 mm and the 13 mm inscribed circle contribute to stable clamping and resistance to tipping under light feed conditions. These features support uninterrupted production and reduce the need for frequent readjustment. Easy integration into ISO tool systems and predictable productivity gains As an ISO-standard triangular insert, the plate integrates directly into established external and internal turning systems with matching holder geometry, tolerance class and fastening arrangements. The insert’s specification supports selection of the appropriate chipbreaker and grade for the workpiece and machining stability, which helps to maximise tool life and deliver predictable cycle times. The NS9530 finishing grade is particularly suitable where fine surfaces are prioritised and small depth-of-cut strategies are used. Overall, this configuration contributes to lower process variability and improved throughput in precision turning applications. Contact Metav Werkzeuge today for tailored application advice and to request the Tungaloy TPGT 130304 NS9530 insert for optimised finish turning Technical data Article number: 6997983 Manufacturer SKU: TUN6997983 SKU: 6997983-Tungaloy Name: TPGT130304 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Clearance (frewinkel): 11° Thickness: 3.18 mm Inscribed circle: 13 mm Included angle: 60° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Grade: uncoated cermet NS9530 Chipbreaker: one-sided Plate shape: triangular Typical application: turning (external and internal) Suitable workpiece material: steel (finishing) System components: ISO insert, matching outer holder or boring bar, shim/ clamp set and spare screws Compatibility: ISO-standard holders defined by shape, clearance angle, tolerance class, fastening and thickness FAQ What machining tasks is this insert best suited for? The TPGT 130304 NS9530 insert is intended for finishing operations on steel, especially continuous cuts and small depths of cut where a high surface quality is required. Which holders are compatible with this triangular ISO insert? Compatibility is determined by insert shape, 11° clearance, tolerance class, fastening method, size and thickness; the plate fits standard ISO triangular holders designed for a 60° included angle. How does the NS9530 grade affect tool life and surface quality? The uncoated NS9530 cermet grade is formulated for finishing: it provides a sharp cutting edge and low cutting forces, delivering excellent surface finish while maintaining competitive tool life in finishing regimes. Can this insert be used for internal turning or grooving? Yes — the insert is suitable for both external and internal turning when used with an appropriate holder or boring bar that accommodates the triangular ISO plate. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius offers a compromise between edge robustness and the ability to achieve fine surface texture, making it well suited to light finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet cutting edge (NS9530), an ISO‑standard triangular geometry and precise dimensional data for predictable finishing performance; obtain supply and application advice through Metav Werkzeuge for seamless integration into production. TPGT 130304 NS9530 Tungaloy indexable insert — triangle ISO insert for Turning, finishing grade A TPGT130304 NS9530 indexable insert engineered for precision finishing in turning operations on steel ISO triangular insert, size 13 Uncoated cermet grade NS9530 Sharp edge for superior surface finish Through hole with countersink 40°–60° Predictable finishing performance with low cutting forces The uncoated cermet NS9530 is a finishing grade optimised for turning steel, offering a sharp cutting edge that reduces cutting forces and improves surface integrity. The reduced forces associated with this grade help to lower vibration sensitivity during continuous cuts and small depths of cut, which in turn reduces the need for secondary smoothing operations and increases process efficiency. These attributes make the insert particularly suitable where consistent surface finish and tight dimensional control are priorities. Accurate geometry and secure clamping for repeatable results The triangular form with a 60° included angle, corner radius 0.4 mm, size 13 and thickness 3.18 mm yields a compact cutting footprint with predictable engagement. The 11° clearance angle and the through‑hole configuration (cylindrical hole with single‑side countersink 40°–60°) ensure stable seating in ISO‑compliant holders; compatibility is governed by shape, clearance angle, tolerance class, clamping method, size and thickness. Understanding these parameters simplifies toolholder selection and ensures repeatable clamping and consistent cutting performance across batches. System integration and selection for efficient turning processes As part of an ISO insert system, the component works together with a matching external holder or boring bar, shim/clamp sets and replacement screws to create a complete tool assembly. The single‑sided chipbreaker and the uncoated NS9530 grade favour finishing passes on steels where minimal cutting forces and excellent surface qualities are required. Selecting the correct chipbreaker and matching the insert to the holder geometry reduces downtime and increases productivity by lowering the rate of rework and scrap. For complex setups or unusual materials, consult technical compatibility notes before final assembly. For precision finishing on steel, contact Metav Werkzeuge for supply and application guidance on Tungaloy NS9530 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997962 SKU: 6997962-Tungaloy Manufacturer SKU: TUN6997962 Model series: ISO-Drehwendeschneidplatten Data Thickness: 3.18 mm Size: 13 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Uncoated cermet NS9530 Triangle form (TPGT) Single-sided chipbreaker Through hole with cylindrical hole + single-side countersink (40°–60°) For turning; compatible with ISO holders, shim/clamp sets and spare screws Material: cemented carbide FAQ What materials is this insert suitable for? The TPGT130304 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous cuts and small depths of cut. How does the NS9530 cermet grade affect surface finish? The uncoated NS9530 cermet delivers a sharp edge and low cutting forces, which together produce a high surface finish and reduce the need for subsequent polishing. Which holder features are required for correct compatibility? Compatibility depends on the insert form, 11° clearance angle, tolerance class, clamping method, size 13 and thickness 3.18 mm; use ISO‑compliant external holders or boring bars with appropriate shim/clamp sets. Is this insert suitable for heavy roughing cuts? The Tungaloy NS9530 finishing grade is designed for finishing; for heavy roughing, a tougher coated grade or different chipbreaker should be selected. What does the through‑hole and countersink specification mean for mounting? The through hole with cylindrical bore and single‑side countersink (40°–60°) ensures central clamping and helps align the insert securely in compatible ISO seats. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing, low cutting forces and ISO compatibility for reliable turning operations; the combination of a sharp uncoated cermet grade and a 0.4 mm nose radius supports consistently high surface quality and stable machining. Order the TPGT 130304 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 130304 NS9530 Tungaloy Turning Insert — uncoated cermet, 0.4 mm nose radius The TPGT 130304 NS9530 is an ISO-standard turning insert designed for finishing steel; it offers a sharp cutting edge and is intended for continuous cuts and small depths in external and internal turning. ISO-standard triangular insert Uncoated cermet grade NS9530 0.4 mm nose radius for fine finishes Cylindrical hole with 40°–60° countersink High-precision finishing for steel turning The finishing grade is an uncoated cermet formulated to deliver a sharp cutting edge and reduced cutting forces, resulting in a high surface finish on steel components. As a finishing insert, the geometry and material of the grade are optimised for continuous cuts and small depths, which lowers the risk of build-up edge and improves repeatability across serial parts. The combination of a finely honed edge and cermet chemistry supports dimensional control and consistent part quality during precision turning. Stable clamping and repeatable geometry for reliable cycles The triangular plate form with a 60° included angle and a 0.4 mm nose radius provides predictable engagement and surface generation. A relief angle of 11° and a plate thickness of 3.18 mm contribute to mechanical stability at the cutting zone, while the insert’s cylindrical hole with a single‑sided countersink (40°–60°) ensures firm, repeatable clamping in ISO-compatible holders. The stable assembly reduces vibration and helps to maintain tool life and part tolerances over longer production runs. Productivity gains from ISO conformity and chip control Conformity with ISO dimensions simplifies integration into existing tool systems, enabling quick changeover and reduced setup times. The one-sided chipbreaker is tailored for finishing tasks and assists chip control without compromising the machined surface. For workshops aiming to improve throughput without sacrificing finish quality, this insert supports shorter cycle times and predictable machining parameters, which together lower process variability and increase overall productivity. Material characteristics and recommended applications The cutting material is an uncoated cermet grade (NS9530) that combines ceramic hardness with metal toughness to sustain a sharp edge during finishing. Cermet inserts are particularly effective on steel when small depths of cut and continuous feed are applied; they produce fine surface finishes and can extend intervals between dressing or edge changes. Typical applications include precision component turning in job shops and production environments where surface integrity and dimensional accuracy are priorities. If further machining data or application guidance is required—such as recommended feeds, speeds or holder selection—contact details for technical queries are available below. Contact Metav Werkzeuge for application advice on Tungaloy NS9530 finishing inserts, availability and technical consultation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6997994 SKU: 6997994-Tungaloy Manufacturer SKU: TUN6997994 Model series: ISO-Drehwendeschneidplatten Label: TPGT130304 NS9530 Tungaloy-Turning Insert Core measurements Corner radius: 0.4 mm Plate thickness: 3.18 mm Size: 13 Included angle: 60° Relief angle: 11° Special features Material: cemented carbide Cutting material: uncoated cermet grade NS9530 Plate form: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided, suitable for finishing Application: external and internal turning ISO-standard dimensions for holder compatibility FAQ Which materials is this insert intended for? The TPGT 130304 NS9530 is specified as a finishing grade for steel; the uncoated cermet composition is optimised for fine surface finishes on steel under continuous cutting and small depth conditions. Is this insert compatible with standard ISO holders? Yes, compatibility follows ISO dimensions; the insert’s triangular form, hole position and thickness are designed for ISO-standard turning holders when matched by correct form, clearance and size. What are the nose radius and relief angle of the insert? This insert has a 0.4 mm nose radius and an 11° relief angle, providing a balance between edge robustness and surface quality. What chip control does the insert provide and when should it be used? The one-sided chipbreaker is designed for finishing operations; it aids chip control without compromising the surface, ideally applied in continuous cuts and small material removals. Which identifiers are useful for ordering or stocking? Refer to article number 6997994, SKU 6997994-Tungaloy and manufacturer SKU TUN6997994 when ordering the TPGT 130304 NS9530 turning insert from stock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade, precise 0.4 mm corner radius and secure ISO compatibility for efficient, low-force turning of non-ferrous materials; order the TPGT130304 TH10 insert directly via Metav Werkzeuge or consult the specialists for application advice. TPGT 130304 TH10 Triangular ISO turning insert for precision turning — Tungaloy TPGT 130304 TH10 is an ISO‑standard triangular turning insert designed for general turning tasks, offering a sharp uncoated cutting edge and a 60° cutting geometry suitable for non‑ferrous and delicate finishing operations. Triangular ISO insert, 60° cutting geometry Sharp uncoated carbide grade TH10 0.4 mm corner radius for fine turning Cylindrical hole with single‑sided countersink Higher throughput with low cutting forces The combination of the TH10 uncoated carbide grade and a sharp edge reduces cutting resistance, which translates into lower cutting forces and smoother chip formation during turning. For applications where material adherence or built‑up edge risk must be minimised—such as machining soft aluminium alloys or brass—the uncoated grade supports cleaner finishes and reduced secondary operations. The triangular 60° geometry enables stable cutting for both external and internal turning cycles, improving cycle times without sacrificing surface quality. Consistent surface quality and fine detail control A precise 0.4 mm corner radius offers a reliable compromise between edge strength and fine profile definition. This radius, together with the single‑sided chipbreaker, delivers controlled chip formation and helps maintain consistent surface roughness on workpieces. Where dimensional accuracy and aesthetic appearance matter—such as in bearing housings or decorative turned parts—the insert’s geometry helps achieve repeatable results and reduces the need for manual rework. Secure seat and simple integration into ISO tool systems The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to match common clamping systems. As an ISO‑standard insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; the 11° relief angle and 3.18 mm thickness are typical for stable seating in a wide range of external holders and boring bars. This standardisation simplifies tool inventory and changeover, supporting uninterrupted production and easier tool life planning. Practical selection and machining guidance For turning of non‑ferrous materials and situations demanding low cutting forces, select the TH10 grade and the one‑sided chipbreaker; when machining harder or coated materials, choose a different grade or coating suited to the substrate. The insert’s triangular form offers three usable cutting edges per insert, improving cost efficiency per cutting edge while maintaining precision. For optimised process results, pair the insert with the correctly sized holder and appropriate clamping set as part of a standard ISO tool system. Contact Metav Werkzeuge for tailored application advice and secure supply of the Tungaloy TPGT130304 TH10 insert for low‑force, high‑quality turning tasks Technical Data Article number: 6808944-Tungaloy Manufacturer SKU: TUN6808944 Manufacturer article number: 6808944 Facts ISO designation: 130304 Cutting angle: 60° Corner radius: 0.4 mm Relief/clearance angle: 11° Thickness: 3.18 mm Inscribed circle/size: 13 Special features Uncoated carbide grade TH10 Triangular plate form One‑sided chipbreaker Cylindrical hole with single‑sided countersink (40°–60°) Suitable for external and internal turning Optimised for non‑ferrous materials and low cutting forces FAQ What materials is this insert best suited for? The TH10 grade insert is optimised for non‑ferrous materials and applications where an uncoated edge aids in achieving low cutting forces and clean surfaces; the TPGT130304 TH10 insert from Tungaloy excels on aluminium and brass. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius balances edge strength with finish capability; it allows the insert to produce fine surface finishes while retaining enough robustness to withstand normal turning loads with the TH10 carbide. Is the insert compatible with standard ISO holders? Yes — as an ISO‑standard turning insert the TPGT130304 fits holders that match its form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder accepts a triangular insert with a 3.18 mm thickness and the specified hole style. How many edges are available per insert and what is the typical use case? The triangular form provides three indexable cutting edges; this insert is typically used for general external and internal turning where low cutting forces and surface quality are priorities. Does the insert include coating? This product is an uncoated carbide insert (TH10), designed to perform without coating where a sharp, low‑force cutting edge improves surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 130304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, low‑force cutting grade, ISO compatibility and a compact 0.4 mm corner radius for consistent finishing and efficient turning operations. Order the insert directly via Metav Werkzeuge or consult the Metav specialists for application advice. TPGT 130304 TH10 indexable turning insert for turning — Tungaloy A compact, ISO‑format triangular indexable insert, TPGT130304 TH10 by Tungaloy, engineered for external and internal turning where low cutting forces and clean surface quality are required. ISO‑format triangular insert, 60° included angle Sharp, uncoated TH10 grade for non‑ferrous 0.4 mm corner radius for fine finishing Cylindrical hole with one‑side countersink 40°–60° Lower cutting forces and cleaner surfaces for non‑ferrous turning The insert is supplied in the uncoated carbide grade TH10, a sharp universal composition designed to reduce cutting forces and promote a clean surface on non‑ferrous materials. This lower cutting resistance helps to reduce tool vibration and minimise thermal loading on the cutting edge, which in turn supports reproducible finishes and extended cycle stability in repetitive turning tasks. The sharp edge geometry is particularly advantageous where fine surface quality is the primary objective. Precise geometry and ISO compatibility that simplify setup Designed to the ISO turning plate series, the triangular plate features a 60° geometry, an inscribed size of 13 mm and a nominal 11° clearance angle; plate thickness is 3.18 mm. These standardised dimensions ensure compatibility with a wide range of external holders and boring bars, provided form, clearance, tolerance class, fastening method, size and thickness match the holder. The plate includes a cylindrical hole with a one‑side countersink (40°–60°) to secure repeatable clamping and accurate seating in the tool body. Practical setup and application guidance to improve productivity The single‑sided chipbreaker is optimised for turning operations where chip control and stable cutting are required; selecting the appropriate chipbreaker and grade relative to workpiece material and machining conditions yields the best balance of productivity and surface quality. The geometry, with a 0.4 mm corner radius, supports light finishing cuts and helps maintain profile accuracy. System assembly normally comprises the ISO insert, a matched external holder or boring bar, a support pad/clamp set and replacement screws — a proven configuration for reliable, repeatable turning. Contact Metav Werkzeuge for tailored advice on toolholder compatibility and to order original Tungaloy indexable inserts directly — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808949 Manufacturer SKU: TUN6808949 Model series: ISO turning indexable inserts Application: Turning Material: Carbide Grade: TH10 Facts Included angle: 60° Clearance angle: 11° Inscribed size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Special features Triangular plate (three cutting edges) Cylindrical hole with one‑side countersink 40°–60° Single‑sided chipbreaker Uncoated carbide grade TH10 ISO‑format plate designation: 130304 FAQ Is this insert suitable for aluminium and other non‑ferrous materials? The TPGT130304 TH10 insert in uncoated carbide grade TH10 is designed specifically for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surfaces. What holder compatibility must be checked before fitting the plate? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the plate is ISO‑format and requires a matching triangular holder or boring bar with suitable clamp and screws. How many cutting edges are available per plate? The triangular geometry provides up to three indexable cutting edges per plate, each with the specified 0.4 mm corner radius. Does the plate require a specific chipbreaker selection? This plate is supplied with a single‑sided chipbreaker; selection of the appropriate chipbreaker style and grade should be matched to the workpiece material and machining strategy for optimal chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 130304 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, low cutting-force geometry and reliable chip control for consistent turning performance; request the original Tungaloy insert via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. TPGT130304 UX30 ISO turning insert, triangular 60° — Tungaloy A TPGT130304 UX30 ISO turning insert designed for external and internal turning, featuring an uncoated carbide grade with a sharp cutting edge and a single-sided chipbreaker for stable chip formation. ISO triangle insert TPGT130304 Sharp cutting edge in UX30 uncoated carbide Single-sided chipbreaker for stable chips 60° included angle, 0.4 mm corner radius Consistent, low-force cutting for precision turning The insert delivers a sharp cutting edge intended to reduce cutting forces and improve chip formation in turning operations. As an uncoated carbide grade UX30, it prioritises low-friction engagement and predictable wear behaviour when cutting under moderate to light cutting parameters. The combination of the single-sided chipbreaker and the insert geometry leads to controlled chip evacuation, which helps maintain machining stability and a consistent surface finish during external and internal turning. Clear compatibility criteria and secure clamping Compatibility with a toolholder is defined by the insert's shape, clearance angle, tolerance class, fastening method, size and thickness. The triangular design with a 60° included angle fits standard ISO triangular holders, while the insert's cylindrical hole with a one-sided countersink (40°–60°) enables screw clamping with a suitable shim or clamp set. Correct seat geometry and fastening torque are essential for repeatable positioning and safe use of the indexable insert in a production environment. Geometry advantages and recommended machining approach The 0.4 mm corner radius balances edge strength and the ability to produce fine profiles, making it suitable for finishing and light-medium turning tasks where low cutting forces are required. The 11° clearance angle reduces rubbing, while the 3.18 mm plate thickness provides sufficient rigidity under normal cutting conditions. Choosing an appropriate holder and stable setup enhances the benefits of the insert geometry and promotes tool life through consistent load distribution. Practical system setup and material considerations The ISO insert is intended as part of a system that includes the matching outside holder or boring bar, a shim/clamp kit and replacement screws. The grade UX30 is configured for applications where good chip formation and low cutting resistance are priorities; the insert performs best when process parameters and workpiece material are matched to this aim. For optimal results, select the chipbreaker and stability level according to the workpiece and the chosen machining strategy. Contact Metav Werkzeuge for original Tungaloy inserts and detailed advice on holder compatibility; technical consultants are available by email or phone to support selection and supply. Technical Data Article number: 6808950 Manufacturer SKU: TUN6808950 Full designation: TPGT130304 UX30 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TPGT130304 Included angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Thickness: 3.18 mm Size (inscribed circle): 13 mm Special features Material: uncoated carbide Grade: UX30 Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: triangular Application: turning FAQ What is the primary application for this insert? The TPGT130304 UX30 Tungaloy turning insert is designed primarily for external and internal turning operations where low cutting forces and stable chip control are required. Which materials is the UX30 grade suited to machine? The UX30 uncoated carbide grade in the TPGT130304 insert is aimed at applications prioritising good chip formation and reduced cutting resistance; selection of the exact grade and chipbreaker should be matched to the specific workpiece material and machining strategy. How is the insert secured in the holder? The TPGT130304 insert uses a cylindrical hole with a one-sided countersink for screw clamping; compatibility depends on matching the insert form, clearance angle, tolerance and thickness to the holder, plus the correct shim or clamp set. What are the key geometry values and their benefits? The insert has a 60° included angle, a 0.4 mm corner radius and an 11° clearance angle; these features combine to offer good edge strength, reduced rubbing and predictable surface finish in light to medium turning. Is the insert coated? No, the TPGT130304 is supplied as an uncoated carbide insert in grade UX30, providing a sharp cutting edge and reliable performance where low cutting forces are beneficial. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com