TPGW 130302 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, long tool life and ISO compatibility for efficient turning of aluminium and non-ferrous materials; order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. TPGW 130302 DX120 — Tungaloy indexable turning insert (PCD, triangular, 60°) The TPGW130302 DX120 is an ISO-standard indexable turning insert with a polycrystalline diamond cutting layer, designed for high-speed external and internal turning of aluminium, non-ferrous metals and abrasive non-metals. PCD grade DX120 for non-ferrous materials Triangular form with 60° cutting angle 0.2 mm corner radius for fine profiling Cylindrical hole with single-sided countersink 40°–60° Increased productivity through high-speed PCD cutting The combination of a PCD cutting layer and the specialised DX120 grade enables substantially elevated cutting speeds compared with conventional carbide inserts. This results in shorter cycle times and more consistent production flow when machining aluminium and other non-ferrous materials. The insert’s design focuses on predictable wear behaviour and extended service intervals, which reduces tool change frequency and contributes to a measurable improvement in process economy. Precise geometry for reliable component quality The triangular insert geometry with a nominal 60° cutting angle and a 0.2 mm corner radius delivers repeatable edge engagement and stable contact conditions. The 11° clearance angle and a plate thickness of 3.18 mm ensure secure seating in ISO holders and support high cutting forces without compromising surface finish. Compatibility with the clamping system is determined by form, free angle, tolerance class, fastening method, size and thickness, so correct holder selection is essential for optimal performance. Designed for demanding non-ferrous and abrasive applications The TPGW130302 DX120 excels on materials that benefit from a diamond cutting edge: pure aluminium alloys, copper and brass alloys, as well as abrasive composites and certain non-metallics. The polycrystalline diamond substrate provides excellent abrasion resistance and a consistently sharp cutting edge, resulting in superior surface quality and longer tool life compared with conventional geometries. Where fine finishes and reduced burr formation are required, this insert provides decisive advantages. Practical system considerations and mounting The insert is supplied in an ISO-standard format and is intended to be used together with a compatible external holder or boring bar, plus a supporting shim/clamping set and replacement screws. The hole design—cylindrical with a single-sided countersink (40°–60°)—facilitates secure clamping and accurate seating. Since the cutting layer and substrate interact closely, pay attention to torque settings and contact seating during assembly to preserve insert life and ensure repeatable manufacturing quality. Contact Metav Werkzeuge for application advice, availability and to request the Tungaloy TPGW130302 DX120 insert; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6809004 Manufacturer SKU: TUN6809004 Store SKU: 6809004-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TPGW130302 Grade: DX120 Cutting material: polycrystalline diamond (PCD) Insert size: 13 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Cutting angle: 60° Special features Triangular insert form Cylindrical hole with single-sided countersink (40°–60°) No chipbreaker Intended for turning of aluminium, non-ferrous metals and abrasive non-metals System: ISO indexable insert, requires compatible holder, shim/clamp set and screws Substrate material indicated as carbide for support structure FAQ What materials is this insert suitable for? The Tungaloy TPGW130302 DX120 insert is designed primarily for aluminium, other non-ferrous metals and abrasive non-metallic materials where a PCD cutting edge offers superior wear resistance. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and seating features; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness to the chosen holder. Why choose DX120 over conventional carbide grades? DX120’s polycrystalline diamond cutting layer provides improved abrasion resistance and longer tool life on suitable materials, delivering better surface finish and reduced regrinding compared with conventional carbide grades. Does this insert include a chipbreaker? No — the insert is supplied without a chipbreaker, so chip evacuation must be managed through cutting parameters and appropriate holder/geometry selection. How does the hole and countersink affect mounting? The cylindrical hole with a 40°–60° single-sided countersink provides secure clamping and precise seating; correct torque and clamp setup are important to maintain repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 130302 DX140 Wendeplatten - Tungaloy
Take advantage of the DX140 polycrystalline diamond cutting layer and a robust carbide substrate to achieve consistent, high‑speed turning of aluminium and other non‑ferrous materials; order directly via Metav Werkzeuge or consult the technical team for application advice. TPGW 130302 DX140 — ISO turning insert (PCD), triangular 60° — Tungaloy TPGW130302 DX140 is an ISO‑standard indexable insert engineered for high‑speed turning of aluminium and non‑ferrous materials, providing long tool life and secure clamping in compatible holders PCD for high‑speed aluminium machining ISO triangular insert, 60° geometry Carbide substrate with DX140 PCD layer Cylindrical hole + countersink for secure clamping High productivity for aluminium and non‑ferrous turning The DX140 polycrystalline diamond (PCD) cutting layer delivers exceptional wear resistance and allows high cutting speeds, which translates into shorter cycle times and reduced tooling changes. Built on a carbide substrate, the insert retains edge stability under thermal and mechanical load, making it particularly suitable for aluminium and other non‑ferrous metals and abrasive non‑metallic materials. For shops that prioritise throughput, the combination of PCD and a stable substrate offers a measurable improvement in production efficiency. Secure seating and stable cutting for reproducible results Designed with a triangular form and a 60° cutting geometry, the insert gives a predictable cutting direction and stable support in standard toolholders. The 11° relief angle reduces rubbing while maintaining cutting edge strength, and the 3.18 mm thickness provides the rigidity required for repeatable external and internal turning tasks. The cylindrical hole + countersink (40°–60°) ensures precise seating and reliable clamping, which helps keep vibrations low and surface finish consistent across batches. Application flexibility with ISO‑compliant system components As an ISO era insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The system typically comprises the ISO insert, a matching external holder or boring bar, a shim/locking set and replacement screws, enabling straightforward integration into existing tooling setups. The grade is supplied without a chipbreaker, so choose cutting parameters and a chip control solution that match the workpiece and machining stability for optimal results. For precision aluminium turning applications, rely on the DX140 PCD insert from Tungaloy and contact Metav Werkzeuge for availability, technical matching and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6809005 SKU (vendor): 6809005-Tungaloy Manufacturer SKU: TUN6809005 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.2 mm Cutting angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Inscribed circle / size: 13 mm Special features Cutting material: polycrystalline diamond (PCD) – DX140 Substrate: carbide Plate form: triangular Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: none (without chipbreaker) Typical application: turning (external and internal) System components: matching holder or boring bar, shim/locking set and replacement screws Suited for: aluminium, non‑ferrous metals and abrasive non‑metallic materials FAQ What materials is this insert suitable for? The TPGW130302 DX140 insert is designed primarily for aluminium and non‑ferrous metals, and it also handles abrasive non‑metallic materials thanks to the PCD cutting layer. How does the DX140 PCD layer benefit machining? The DX140 polycrystalline diamond layer increases wear resistance and allows higher cutting speeds compared with conventional carbide grades, extending tool life in abrasive or high‑speed turning operations. Is the insert compatible with standard ISO holders? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the TPGW130302 fits holders designed for ISO triangular inserts of the stated dimensions. What clamping features ensure secure seating? The insert includes a cylindrical hole and a one‑sided countersink (40°–60°) to provide accurate seating and robust clamping in the toolholder. What is the manufacturer article number and SKU? Manufacturer article number 6809005; reference SKU 6809005‑Tungaloy or manufacturer SKU TUN6809005 for ordering and stock enquiries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 130304 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of CBN cutting performance, ISO-standard compatibility and a compact 60° geometry for predictable finishing of hardened components; order the insert directly via Metav Werkzeuge or consult our specialists for selection and machining data. TPGW130304 BX360 Tungaloy — ISO triangular turning insert, CBN grade for hard turning The TPGW130304 BX360 Tungaloy is an ISO-standard triangular turning insert designed for finishing and wear‑intensive turning of hardened steels and, where applicable, cast iron. ISO triangular insert TPGW130304 BX360 Cubic boron nitride (CBN) grade for hardened steels 60° geometry, 3.18 mm thickness, 0.4 mm corner radius Countersunk centre hole for secure clamping Reliable cutting performance for hardened materials The insert is manufactured with a cubic boron nitride (CBN) cutting face in the BX360 grade, providing high abrasion resistance for end‑finish operations on hardened steel. CBN is an engineered superabrasive that maintains edge integrity where conventional carbide wears rapidly; this results in more consistent surface quality and predictable tool life during finishing passes. The composition and grade selection mean fewer regrinds and controlled dimensional stability when working at the high hardness range intended for this grade. ISO geometry and secure clamping for plug‑and‑play use Built to ISO geometry, the triangular shape with a 60° included angle and 3.18 mm plate thickness ensures compatibility with a wide range of ISO turning holders. The insert features a central cylindrical hole with a one‑sided countersink (40°–60°), enabling reliable clamping and repeatable seating in standard clamping systems. Because compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness, this ISO conformity simplifies holder matching and reduces setup time in production environments. Precise edge form for finishing and tight tolerances A corner radius of 0.4 mm provides a compromise between edge strength and fine surface generation, making this insert suitable for finishing passes where dimensional accuracy and surface integrity are priorities. The grade is supplied without a chipbreaker, which allows experienced programmers and operators to choose cutting parameters and external chip control to suit part geometry and machine stability. The carbide substrate supports the CBN layer and contributes to secure brazing and heat resistance during medium to high cutting temperature conditions. Contact Metav Werkzeuge for technical advice or to request a quotation for the TPGW130304 BX360 Tungaloy insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6809010 Manufacturer SKU: TUN6809010 SKU: 6809010-Tungaloy Model series: ISO turning inserts Brand: Tungaloy Specifications Geometry angle: 60° Plate thickness: 3.18 mm Corner radius: 0.4 mm Size: 13 mm Free clearance angle: 11° Model code: 130304 Features & Materials Cutting material: cubic boron nitride (CBN), grade BX360 Substrate material: carbide Plate form: triangular Central hole: cylindrical with one‑sided countersink (40°–60°) Chipbreaker: none (without) Primary application: turning Typical use: finishing and wear‑intensive machining of hardened steels; possible use on cast iron depending on execution Compatibility: ISO holders defined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert intended for? The TPGW130304 BX360 Tungaloy insert (SKU 6809010-Tungaloy) is primarily intended for machining hardened steels and, depending on the execution, can be applied to cast iron in finishing operations. How does the 60° geometry affect holder compatibility? The 60° triangular geometry is ISO standard; compatibility with holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness, allowing straightforward matching to ISO‑compliant turning toolholders. Is there a chipbreaker on the insert? This grade is supplied without a chipbreaker, which permits flexible choice of cutting parameters and external chip control suited to the workpiece and machine setup. What does BX360 mean and why choose CBN? BX360 denotes the CBN grade optimised for high hardness and abrasive wear resistance; CBN is selected where conventional carbide fails to retain edge life on hardened materials, providing stable finishes and reduced tool change frequency. How is the insert clamped in the holder? Clamping is achieved via the central cylindrical hole with a one‑sided countersink (40°–60°), ensuring secure seating and repeatable positioning in compatible clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 130304 DX140 Wendeplatten - Tungaloy
Take advantage of the DX140 polycrystalline diamond grade and the ISO‑compliant triangular geometry to achieve higher cutting speeds and extended tool life in non‑ferrous turning operations; order directly via Metav Werkzeuge or consult their specialists for application support. TPGW130304 DX140 indexable insert for Turning — Tungaloy TPGW130304 DX140 is an ISO‑standard triangular indexable insert designed for turning aluminium, non‑ferrous metals and abrasive non‑metallic materials. Triangular 60° insert for turning Polycrystalline diamond (PCD) DX140 grade Long tool life at high cutting speeds Cylindrical hole with single‑side countersink High productivity for non‑ferrous machining The TPGW130304 DX140 indexable insert combines a polycrystalline diamond (PCD) cutting layer with a robust substrate to deliver markedly higher productivity when machining aluminium and other non‑ferrous alloys. The DX140 grade is formulated to tolerate elevated cutting speeds while maintaining a stable cutting edge, which results in long tool life and fewer indexings. For volume production this translates into a lower cost per part and less downtime for insert changes, while preserving consistent dimensional accuracy and surface quality. Precise geometry for reliable chip control and fitment The triangular 60° form with a 0.4 mm nose radius and 11° clearance angle offers a balance between edge strength and finish capability. The insert’s dimensional data (inscribed circle 13 mm, thickness 3.18 mm) and the cylindrical hole with single‑side countersink (40°–60°) ensure straightforward seating in ISO holders. Because compatibility to the holder depends on form, relief, tolerance class, fastening and thickness, this ISO‑compliant geometry supports reliable clamping and repeatable positioning, reducing vibration and improving process stability on both external and internal turning operations. Reduced wear and consistent surface integrity Using PCD cutting material for abrasive or gummy non‑ferrous workpieces minimises built‑up edge and abrasion, delivering superior surface finish and extended cutting intervals. The absence of an integrated chipbreaker must be considered when planning the machining strategy: for many aluminium alloys a simple toolpath and moderate feed give clean chips, but if chip control is critical, select an appropriate chip‑controlling holder or a variant with a dedicated chipbreaker. Overall, the combination of the DX140 grade and ISO geometry improves repeatability and lowers manufacturing variability. System approach and practical handling The insert is intended for use as part of a system: indexable insert, suitable external holder or boring bar, a shim/clamping kit and replacement screws. Keeping spare holders, a clamping kit and spare screws to hand reduces machine downtime and keeps changeovers swift. The insert’s ISO standard designation simplifies procurement and inventory management across multiple machines and centres, while the clear indication of grade and geometry supports correct tool selection for specific materials and stability conditions. For tailored advice on integrating Tungaloy DX140 PCD inserts into production, and for immediate supply via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and order options Technical Data Article number: 6809008 SKU: 6809008-Tungaloy Manufacturer SKU: TUN6809008 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Core dimensions Inscribed circle: 13 mm Thickness: 3.18 mm Nose radius: 0.4 mm Lead/angle: 60° Clearance angle: 11° Materials & features Substrate material: carbide Cutting material: polycrystalline diamond (PCD) Grade: DX140 Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: without Application: Turning Plate form: triangular Typical use: aluminium, non‑ferrous metals, abrasive non‑metallics FAQ Which materials are best suited to this insert? The TPGW130304 DX140 indexable insert is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials thanks to its polycrystalline diamond cutting material and DX140 grade. Can the insert be used at very high cutting speeds? Yes, the DX140 PCD grade is designed for high cutting speeds, enabling longer tool life and improved productivity when machining suitable materials. How is compatibility with toolholders ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO‑standard geometry of this insert facilitates correct seating in matching holders. Is a chipbreaker integrated in this insert? No, this insert is specified without a chipbreaker; chip control should be managed via toolpath strategy or a holder with chip‑control features if required. What components complete the system for mounting? A matched external holder or boring bar, a shim/clamping kit and replacement screws are the recommended accompanying components for secure and repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 130304 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, the sharp TH10 uncoated carbide grade and the precise 60° triangular geometry to achieve low cutting forces and consistent surface quality in non‑ferrous turning. Order the TPGW130304 TH10 insert directly via Metav Werkzeuge or consult their specialists for holder compatibility and application advice. TPGW130304 TH10 — ISO turning insert, 60° triangular, Tungaloy The TPGW130304 TH10 is an ISO-indexable turning insert designed for external and internal turning, optimised for non‑ferrous materials and light finishing cuts. ISO 60° triangular insert Uncoated carbide TH10 grade Nose radius 0.4 mm for fine finishes Cylindrical hole with 40°–60° countersink Precision where low cutting forces matter The insert delivers a combination of ISO-standard geometry and a sharp, uncoated carbide cutting edge that reduces friction and supports low cutting forces. This is particularly advantageous when machining aluminium alloys and other non‑ferrous materials where minimal burr formation and a clean surface are priorities. The 0.4 mm radius permits fine finishing passes without compromising edge stability, enabling reproducible part quality in batch production. Secure fastening and predictable compatibility Compatibility with a holder is governed by form, relief angle, tolerance class, fastening method, size and thickness; the insert has an 11° relief angle and a triangular 60° form to match ISO clamping systems. The cylindrical hole with a single‑side countersink (40°–60°) ensures reliable seating and torque transmission when combined with the correct clamping kit and screws. Specifying the matching holder and underlay plate reduces runout and extends tool life through consistent clamping. TH10 grade: universal performance for non‑ferrous work The TH10 grade is an uncoated, sharp universal grade developed for applications where a clean edge and low cutting forces are required. In practice, this grade supports efficient chip flow and good surface finishes without the need for coatings that could blunt the cutting edge in delicate operations. For jobs focused on aluminium, brass or other soft alloys, the grade helps to maintain productivity while keeping cutting forces moderate. System thinking for repeatable productivity An efficient turning setup comprises the ISO insert, a matching external holder or boring bar, an underlay/klemmsatz and replacement screws. The insert’s 3.18 mm thickness and 13 mm inscribed circle are key dimensions for selecting the correct toolholder family. When these components are specified and assembled according to ISO tolerances, the result is reduced set‑up time, stable cutting conditions and fewer rejects — a pragmatic approach that supports continuous production and process reliability. For application-specific advice or immediate availability of the Tungaloy TPGW130304 TH10 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss holder matching and delivery options Technical data Article number: 6809007 Manufacturer SKU: TUN6809007 SKU: 6809007-Tungaloy Model series: ISO-Drehwendeschneidplatten Article name: TPGW130304 TH10 Tungaloy-Wendeplatte Facts Insert form: triangular 60° Nose radius: 0.4 mm Relief angle: 11° Plate thickness: 3.18 mm Inscribed circle: 13 mm Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: without Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: Turning ISO designation: TPGW130304 FAQ What materials is this insert suitable for? The TPGW130304 TH10 insert is intended primarily for non‑ferrous materials such as aluminium and brass; the TH10 uncoated grade supports low cutting forces and clean surface results. Can the insert be used for finishing passes? Yes, the 0.4 mm nose radius and sharp TH10 grade make the insert suitable for light finishing operations where surface quality is important. Which holder characteristics determine compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, the insert size (13 mm) and thickness (3.18 mm); correct matching ensures repeatable clamping and minimal runout. Is a chipbreaker included with the insert? This insert is supplied without a chipbreaker; chip control should be achieved through grade selection, cutting parameters and coolant strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 16T302 BX360 Wendeplatten - Tungaloy
Data inconsistency detected: the insert is described both as cemented carbide and as cubic boron nitride (CBN), which are distinct cutting materials and cannot both be the primary substrate. This discrepancy raises concerns about the accuracy of the provided information, as cemented carbide and CBN serve different purposes in machining applications, with cemented carbide typically used for general-purpose cutting and CBN being more suitable for hard materials. Please verify the source data for the Tungaloy TPGW16T302 BX360 (SKU 6809013-Tungaloy / TUN6809013), cross-check it with the manufacturer's specifications, and supply corrected and accurate details to ensure proper identification and usage of the insert.
TPGW 16T302 DX140 Wendeplatten - Tungaloy
Benefit from the combination of very high cutting speeds and extended tool life thanks to the PCD DX140 grade and precise ISO geometry; this yields efficient aluminium turning and stable production runs. Order the TPGW16T302 DX140 insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TPGW16T302 DX140 – Indexable turning insert for high-speed aluminium turning | Tungaloy A TPGW16T302 DX140 indexable turning insert engineered for fast turning of aluminium, non-ferrous metals and abrasive non-metals, offering sustained performance in ISO-standard turning systems PCD grade DX140 for aluminium machining ISO-standard triangle insert, 60° geometry Long tool life and high cutting speeds Cylindrical hole with 40°–60° countersink High-speed aluminium turning with PCD for increased productivity The PCD cutting structure, designated DX140, is optimised for machining aluminium and other non-ferrous materials at elevated cutting speeds while delivering long tool life and consistent edge quality. Polycrystalline diamond (PCD) is a superhard cutting material that provides excellent abrasion resistance and extremely low flank wear on soft, abrasive workpieces; this reduces the frequency of insert changes and minimises unplanned downtime. Specifying a PCD grade such as DX140 supports more productive cycle times and predictable process windows, which is particularly advantageous in high-volume components and finishing operations. Precise ISO geometry for stable cuts and predictable results The insert’s triangular 60° geometry, combined with a 0.2 mm corner radius and an 11° relief angle, creates a stable cutting edge that balances strength and form accuracy. A thickness of 3.97 mm increases rigidity in the clamping area, reducing vibration during turning operations and improving surface finish. The central hole with cylindrical bore and single-side countersink (40°–60°) ensures reliable clamping in compatible holders; correct clamping eliminates micro-movement under load and preserves the integrity of the PCD edge, translating into repeatable component quality and reduced rework. System compatibility and application guidance for efficient integration This indexable insert is part of an ISO-standard turning insert series and is designed to work within a system consisting of a matching external holder or boring bar, shim/clamping kit and replacement fastening screws; compatibility depends on form, relief angle, tolerance class, fastening style, size and thickness. The insert is supplied without an integrated chipbreaker, so selection of the appropriate cutting geometry and cutting parameters is essential for chip control in specific turning tasks. Typical uses include external and internal turning where DX140 PCD excels on aluminium, non-ferrous alloys and abrasive non-metals, offering a balance of speed and longevity for production and finishing operations. Contact Metav Werkzeuge for tailored technical advice and to source the Tungaloy PCD DX140 insert directly — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809012 SKU: 6809012-Tungaloy Manufacturer SKU: TUN6809012 WPL designation: TPGW16T302 Label: TPGW16T302 DX140 Tungaloy-Wendeplatte Material: Hartmetall Dimensions & angles Size: 16 Thickness: 3.97 mm Corner radius: 0.2 mm Insert angle: 60° Relief angle: 11° Features & applications Polycrystalline diamond (PCD) cutting material Grade DX140 Triangle insert, with hole and single-side countersink 40°–60° No chipbreaker For turning: external and internal Suitable for aluminium, non-ferrous metals and abrasive non-metals ISO-standard turning insert series Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for hardened steels? No. The TPGW16T302 DX140 insert is intended for aluminium, non-ferrous metals and abrasive non-metals; it is not designed for machining hardened steels. What does the absence of a chipbreaker imply for machining? An insert without a chipbreaker, such as this DX140 variant, requires appropriate cutting conditions and toolholder geometry to achieve effective chip control during turning. Can the insert be used in internal and external turning operations? Yes. The ISO-design insert is suitable for both external and internal turning when combined with a compatible holder and correct setup. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius provides a compromise between edge strength and fine surface finish; it helps maintain part geometry and reduces burr formation on aluminium components. Which holding features ensure secure clamping? The cylindrical central hole with a single-side countersink (40°–60°) and the specified thickness and relief angle support reliable clamping in compatible holders Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T304 BX360 Wendeplatten - Tungaloy
Take advantage of the BX360 CBN grade, its triangular 60° geometry and the TurnTenFeed system for reliable, high‑feed roughing of hardened components; order directly via Metav Werkzeuge or consult our advisers for application support. TPGW 16T304 BX360 — Tungaloy triangular CBN insert for turning (TurnTenFeed) A TPGW16T304 BX360 Tungaloy indexable insert engineered for high‑feed turning and productive roughing under stable clamping conditions. CBN grade BX360 for hardened steels Designed for high‑feed roughing Triangular insert with 60° cutting angle Hole with cylindrical bore and countersink Productive roughing with a wear‑resistant cutting grade The BX360 grade is a CBN‑based cutting material developed for demanding finishing and semi‑finishing of hardened steels. Its high abrasion resistance enables longer cutting intervals and consistent edge condition during extended runs, which directly improves process stability and reduces tool change frequency. Used within the TurnTenFeed family, this insert supports high‑feed turning strategies where high material removal rates and controlled heat generation are priorities. The result is a reproducible, economic roughing operation on hardened workpieces without compromising component integrity. Stable geometry for secure clamping and consistent chip formation A triangular plate form with a 60° included angle and a corner radius of 0.4 mm provides a robust cutting edge well suited to aggressive approach angles used in heavy roughing. The insert’s 3.97 mm thickness and the central mounting hole with a cylindrical bore plus a single‑side countersink (40°–60°) ensure reliable fixation in compatible holders, reducing the risk of movement under elevated cutting forces. This geometry promotes steady tool behaviour and a predictable cut, which simplifies process planning and fixture requirements. Clear material compatibility and application focus Primarily engineered for hardened steels, the cutting grade can also be supplied in executions suitable for cast iron where specified. The insert is free of an integrated chipbreaker, a configuration that favours chip flow and stability in high‑feed roughing when paired with suitable coolant and chip evacuation strategies. As an indexable solution, it allows rapid replacement of worn tips with minimal downtime, supporting continuous production in workshops and machining centres focused on batch runs or series production. System integration and operational benefits As part of the TurnTenFeed modular system, the insert is intended for use with matched toolholders and spare parts to build a productive machining setup. The indexable format reduces inventory complexity compared with solid tools, while the CBN cutting edge provides repeatable performance for wear‑intensive finishing stages. For engineering teams seeking to raise throughput on hardened components, this insert offers a balance of process reliability, straightforward handling and material‑specific performance that supports predictable cycle times and surface quality. For machining applications requiring high‑feed roughing with CBN performance, contact Metav Werkzeuge to discuss the Tungaloy BX360 inserts, verify fitment in existing tooling systems and confirm stock availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6809017 SKU: 6809017-Tungaloy Manufacturer SKU: TUN6809017 Designation: TPGW16T304 BX360 Tungaloy insert Model series: TurnTenFeed Manufacturer: Tungaloy Data Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Cutting angle: 60° Hole style: cylindrical bore with single‑side countersink 40°–60° Special features Grade: BX360 (CBN) Material: carbide (Hartmetall) Application: turning, high‑feed roughing Chipbreaker: none Insert shape: triangular Mounting: with hole System components: holders, indexable inserts, spare parts FAQ What materials is this insert suited for? The TPGW16T304 BX360 insert is designed primarily for hardened steels and, depending on the chosen execution, can be used for cast iron as well; the BX360 CBN grade delivers wear resistance for abrasive, high‑hardness applications. How does the BX360 grade differ from carbide alternatives? BX360 is a CBN cutting material optimised for high wear resistance on hardened steels; compared with conventional carbide tips, BX360 maintains cutting edge integrity longer when machining high‑hardness workpieces. Which tool system fits this insert? This insert belongs to the TurnTenFeed family and is intended for use with compatible holders from that system; the central hole with countersink secures the plate reliably in standard indexable turning toolholders. Is there a chipbreaker on the insert? The insert is supplied without a chipbreaker, a configuration that suits controlled high‑feed roughing when combined with appropriate coolant and chip evacuation measures. What are the key dimensions to check for retrofit? Important measurements are the insert size (16 mm), thickness (3.97 mm), corner radius (0.4 mm) and the 60° geometry; confirming these values ensures proper seating and cutting geometry in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 16T304 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of high-feed capability, polycrystalline diamond performance and secure clamping for a more productive turning process — order the insert through Metav Werkzeuge or consult our application specialists for integration advice. TPGW 16T304 DX140 Tungaloy turning insert for Drehen — PCD, 60° triangular The TPGW16T304 DX140 is a triangular turning insert engineered for high-feed, productive rough turning of aluminium and other non-ferrous materials. TurnTenFeed series for high-feed turning PCD DX140 for extended tool life 60° triangular geometry for stable cuts Cylindrical hole with countersink for secure clamping Productive high-feed roughing for non-ferrous components The polycrystalline diamond (PCD) DX140 grade provides consistently long tool life and permits significantly higher cutting speeds when machining aluminium and abrasive non-ferrous materials. In a high-feed roughing context, this leads to shorter cycle times and fewer tool changes, which translates directly into reduced machining costs and higher throughput. The triangular form paired with a 60° cutting angle maintains a robust cutting edge under the higher feed rates typical of TurnTenFeed-style operations. Predictable performance and material suitability explained A PCD cutting layer bonded to a carbide substrate gives a balance between wear resistance and mechanical support: the diamond surface copes with abrasive chips while the substrate absorbs cutting forces. The DX140 grade is optimised for aluminium, Messing and other light alloys as well as abrasive non-metals, enabling sustained performance even under demanding feeds. The absence of a dedicated chipbreaker is compensated by process parameter selection and stable clamping, so the focus is on maximising metal removal rate with repeatable surface quality. Secure clamping and reliable geometry for stable set-ups A cylindrical hole with a single-sided countersink (40°–60°) ensures precise seating and repeatable datum against the toolholder, which increases process stability in rigid set-ups. The insert’s 0.4 mm corner radius and 3.97 mm thickness are designed to withstand the loads of productive roughing while producing consistent component profiles. When paired with appropriately rated holders from the same system family, the result is improved dimensional stability across production runs and fewer interruptions for reindexing. Practical selection and integration in the workshop Adopting a PCD solution such as this triangular insert yields the greatest benefit where aluminium and other non-ferrous components are produced in medium to high volumes and where cycle-time reduction is a priority. The insert is part of a system comprising holders, indexable inserts and spare parts, which simplifies procurement and tool management. For teams less familiar with PCD, basic trial cuts under controlled conditions will reveal the optimal feed and speed window; once tuned, the configuration typically returns stable, repeatable results and extended life compared with conventional carbide tooling. Contact Metav Werkzeuge for application guidance, availability of the Tungaloy PCD DX140 inserts and recommendations on compatible TurnTenFeed holders — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process implementation and delivery options. Technical Data Article number: 6809016 Manufacturer SKU: TUN6809016 Our SKU: 6809016-Tungaloy Model series: TurnTenFeed Application: Drehen Facts Insert designation: TPGW16T304 Grade: DX140 (PCD) Size: 16 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Main angle: 60° Special features Substrate material: Hartmetall Plate form: triangular Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: without System composition: holders, indexable inserts and spare parts FAQ What materials is this insert best suited for? The TPGW16T304 DX140 insert is designed primarily for aluminium, Messing and abrasive non-ferrous materials; the PCD DX140 grade provides long life under high cutting speeds. How does the DX140 grade affect tool life? DX140’s polycrystalline diamond surface offers superior wear resistance, so the Tungaloy insert delivers extended tool life and fewer indexings compared with conventional grades when used on recommended materials. Which holders are compatible with this insert? The insert is intended for TurnTenFeed-style holders and clamping systems; select toolholders that match the TPGW geometry and provide rigid support for high-feed operations. Is a chipbreaker included on this insert? This variant is supplied without a chipbreaker, so process parameters and stable clamping should be used to manage chip formation effectively. What are the key dimensions to check before ordering? Confirm the insert size (16), thickness (3.97 mm), corner radius (0.4 mm) and the hole/countersink arrangement to ensure compatibility with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T304 GH110 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy GH110 cutting grade, TurnTenFeed high-feed geometry and a robust carbide substrate for fast, repeatable material removal in roughing operations. The insert’s 60° triangular form and 0.4 mm nose radius deliver stable profiles and predictable wear, helping to maintain cycle times. Order the Tungaloy insert directly via Metav Werkzeuge or consult our specialists for process integration. TPGW 16T304 GH110 turning insert — high-feed roughing insert by Tungaloy, triangle 60°, 16 mm A TPGW16T304 GH110 insert engineered for high-feed turning and productive roughing under stable clamping conditions. High-feed turning geometry for productive roughing Tungaloy GH110 grade: wear-resistant and tough Triangle 16 mm insert with 60° cutting angle 0.4 mm nose radius for accurate contouring Cylindrical hole and 40°–60° single-side countersink Maximise removal rates with high-feed geometry The TurnTenFeed series brings a geometry specifically tuned for high-feed turning, allowing significantly higher feed per revolution while preserving cutting-edge stability. The triangular 60° layout distributes cutting forces across multiple corners, enabling fast bulk material removal in roughing cycles. By combining this geometry with a dedicated carbide substrate, the design reduces machining time per component and supports consistent cycle outputs on machines with stable clamping. Practical benefits include shorter cycle times and improved throughput without sacrificing dimensional control. Durable performance from the GH110 grade and carbide substrate The selected GH110 cutting grade balances wear resistance and toughness to withstand interrupted cuts and varied workpiece materials. The carbide composition provides the necessary substrate hardness for long tool life while the grade delivers edge integrity under elevated loads. Together these features reduce insert change frequency and lower tooling cost per part over long production runs. For process planners this means fewer machine stops for tool exchange and a more reliable production rhythm, supporting predictable planning and inventory turnover. Precise profiling and clamping compatibility for repeatable parts A 0.4 mm nose radius supports accurate profile generation while limiting deflection on stable setups; small radii improve surface finish on pre-machined or near-net components. The insert’s cylindrical hole with a single-side 40°–60° countersink fits standard clamping systems and simplifies indexation. The triangular 16 mm format allows three usable cutting corners, improving economy per insert. Explanations: a smaller nose radius gives finer edge detail but requires correct rigidity, and the countersunk hole secures repeatable seating in the toolholder, reducing runout and ensuring consistent results across batches. For reliable supply and technical advice on Tungaloy TurnTenFeed inserts, contact Metav Werkzeuge to discuss suitable holders, process parameters and delivery options Technical data Article number: 6809014 SKU: 6809014-Tungaloy Manufacturer SKU: TUN6809014 Model series: TurnTenFeed Facts Insert size: 16 mm Insert thickness: 3.97 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 11° Special features Material: carbide Grade: GH110 (Tungaloy) Shape: triangular insert Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: without chipbreaker Application: turning, high-feed productive roughing System components: holders, indexable inserts and spare parts FAQ What applications suit this triangular insert best? The TPGW16T304 GH110 insert from Tungaloy is designed for high-feed turning and productive roughing where stable clamping allows elevated feed rates and aggressive metal removal. Can the GH110 grade handle interrupted cuts and mixed materials? Yes, the GH110 grade combines toughness with wear resistance so the insert copes well with intermittent cuts and a broad range of materials when used within recommended cutting parameters. How does the 0.4 mm nose radius affect surface finish and strength? A 0.4 mm nose radius provides finer profile detail and improved surface finish but benefits most from a rigid setup; the insert’s carbide substrate maintains edge strength under the loads typical for roughing. Is a special holder required for the TPGW16T304 format? Standard holders that accept triangular 16 mm TPGW inserts with a countersunk seating are compatible; secure clamping and correct seat alignment are essential for consistent performance. What does 'without chipbreaker' mean for chip control? As delivered the insert features no integrated chipbreaker; chip control must be addressed via cutting parameters, coolant strategy and suitable toolholder geometry for safe evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T304 TH10 Wendeplatten - Tungaloy
Take advantage of the TurnTenFeed family for high-feed, productive roughing with a sharp, uncoated TH10 carbide grade and a 60° cutting geometry; the combination delivers low cutting forces and consistent surface quality in turning operations. Order directly via Metav Werkzeuge or contact our consultants for application advice and availability. TPGW16T304 TH10 indexable insert for turning — Tungaloy, high-feed roughing A TPGW16T304 TH10 triangular insert designed for productive high-feed turning and robust roughing under stable clamping conditions. High-feed turning family for productive roughing Uncoated TH10 carbide for low cutting forces Triangular 16 mm insert with 60° cutting angle Hole with countersink for secure mounting Maximised removal rates with predictable roughing performance The TurnTenFeed series is configured for high-feed turning, enabling elevated material removal without compromising process stability. The triangular indexable insert geometry paired with a 60° cutting angle supports steeper feed strategies that shorten cycle times while maintaining acceptable surface integrity. The uncoated TH10 carbide grade promotes a sharp, wearing edge which reduces cutting resistance in many non-ferrous and mixed applications; this translates into lower spindle loads and improved productivity on suitable machines. For operations where stable clamping is assured, the insert’s design ensures consistent engagement and repeatable results across batches. Lower cutting forces and improved edge behaviour for cleaner finishes The uncoated carbide composition of this grade is chosen to support low cutting forces and a clean cutting action, especially in non-ferrous materials and applications sensitive to built-up edge. The 0.4 mm corner radius contributes to a favourable balance between edge strength and surface quality: it resists premature chipping while helping to achieve acceptable finishes during roughing passes. Because the insert is supplied without a chipbreaker, the machining strategy should pair tool geometry with appropriate feeds and speeds to control chip form; this offers flexibility for experienced users seeking to tune performance to specific workpiece materials or coolant regimes. Secure mounting and easy integration into productive toolsets The insert is sized at 16 mm with a thickness of 3.97 mm and is supplied with a hole featuring a cylindrical bore plus a one-sided countersink (40°–60°), allowing reliable clamping in standard holders. The insert integrates into the TurnTenFeed system that comprises holders and spare parts, enabling straightforward tool assembly and stock management. The 11° relief angle and triangular plate shape facilitate multiple indexings per insert, extending tool life and improving cost-efficiency in production runs. For applications where routine replacement and predictable performance matter, this configuration supports fast changeovers and stable cycle planning. For specification checks, application recommendations or current stock information on the TPGW16T304 TH10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6809015 Manufacturer SKU: TUN6809015 SKU: 6809015-Tungaloy Model series: TurnTenFeed Material: carbide Facts Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Cutting angle: 60° Special features Uncoated TH10 carbide grade Triangular insert form With hole: cylindrical hole + one-sided countersink (40°–60°) No chipbreaker Designed for turning and high-feed roughing FAQ What materials is this insert suitable for? The TPGW16T304 TH10 insert is optimised for non-ferrous materials and applications where an uncoated, sharp carbide edge supports low cutting forces and clean surfaces. How many indexings per insert are typical? As a triangular insert, multiple indexings are available; the exact number depends on wear patterns and the chosen cutting parameters for the application. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker to allow adaptable chip control through process settings and dedicated holder geometry. What system components are required to use this insert? The insert is part of the TurnTenFeed family and is intended for use with matching holders and clamping parts from the same system to ensure correct seating and secure fixation. What is the corner radius and how does it affect performance? The corner radius is 0.4 mm, which offers a compromise between edge strength and achievable surface quality, suitable for robust roughing while limiting chipping in many applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T308 BX360 Wendeplatten - Tungaloy
Take advantage of CBN cutting performance and the BX360 grade for consistent finishing of hardened parts; the triangular 60° geometry and 0.8 mm corner radius deliver precise, repeatable results in demanding turning operations. Order the insert via Metav Werkzeuge or consult our technical team for application-specific advice. TPGW16T308 BX360 Tungaloy turning insert — CBN grade for hardened-steel finishing, 60° triangle TPGW16T308 BX360 is an ISO-standard triangular insert engineered for precision turning of hardened components, offering a combination of wear resistance and dimensional stability for high‑performance finishing. CBN grade BX360 for hardened steels 60° triangular geometry for versatile turning Cylindrical hole with 40°–60° countersink 0.8 mm corner radius for accurate profiles Consistent finish and long life for hardened machining The BX360 grade, based on cubic boron nitride (CBN), is formulated specifically for the high abrasive wear encountered when machining hardened steels. Its dense CBN cutting layer provides superior thermal and chemical resistance compared with conventional carbide grades, which reduces flank wear and extends the interval between tool changes. With a corner radius of 0.8 mm and a 60° triangular geometry, the insert supports stable cutting edge engagement, enabling consistent surface quality and tight dimensional control during finishing passes. Secure clamping and easy integration into ISO tool systems Designed to the ISO turning insert standard, the triangular plate fits common external holders and boring bars when form, relief angle and thickness are matched. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that ensures reliable seating and repeatable orientation when fastened, while the plate thickness of 3.97 mm contributes to rigidity under finishing cuts. These mechanical particulars simplify tool changeovers and reduce setup variability, supporting higher process stability and reproducible cycle times. Practical benefits for shop-floor productivity Using a CBN insert like this one reduces rework and improves first‑pass accuracy in hard turning. The absence of a chipbreaker in this version supports smooth chip evacuation in many finishing conditions, while the 11° clearance angle helps to control cutting forces and minimise heat build-up at the cutting edge. Together, these features translate into lower unit machining costs for hard materials, fewer interruptions and improved component quality — advantages that are particularly valuable in high-mix or small-batch production environments. Contact Metav Werkzeuge for technical consultation and reliable supply of Tungaloy BX360 inserts; our advisers can confirm suitability for specific machines and components and assist with selection and delivery Technical data Article number: 6809020 Brand: Tungaloy Manufacturer SKU: TUN6809020 ISO designation: TPGW16T308 Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 16 mm Included angle: 60° Clearance (free) angle: 11° Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Cutting material: cubic boron nitride (CBN) Grade: BX360 Substrate: carbide Insert shape: triangular (TPGW) Chipbreaker: without Application: turning (finishing of hardened materials) FAQ Which materials are suitable for this insert? The insert is specified for the BX360 CBN grade and is intended primarily for hardened steels and, depending on the workpiece and grade adaptation, certain types of cast iron. Is this insert compatible with standard ISO triangular holders? Yes. The TPGW16T308 designation follows ISO geometry; compatibility depends on matching form, relief angle, tolerance class, fastening and plate thickness in the chosen holder. What profile accuracy can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius supports accurate profile definition for finishing cuts and helps distribute cutting forces, improving edge life and consistency across series production. Does this insert include a chipbreaker? This version is supplied without a chipbreaker; it is intended for finishing operations where controlled chip formation and evacuation are achieved through process parameters and tool geometry. How should the insert be fastened to ensure repeatable results? Use the correct clamping set and screws matched to the holder and the insert’s cylindrical hole with countersink; proper seating and torque ensure repeatable orientation and optimal cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T308 DX140 Wendeplatten - Tungaloy
Take advantage of the PCD cutting edge and DX140 grade for sustained high cutting speeds and extended tool life in aluminium and non-ferrous machining; order the insert directly via Metav Werkzeuge or request tailored advice from their consultants. TPGW16T308 DX140 Tungaloy turning insert (PCD, 60° triangle) TPGW16T308 DX140 indexable turning insert for high-speed machining of aluminium and other non-ferrous and abrasive non-metallic materials PCD for high-speed machining ISO 16T308 triangular form Long tool life on aluminium 60° geometry with 0.8 mm radius Maximise productivity with a PCD grade designed for aluminium The DX140 grade, based on polykristalliner Diamant (PCD), is engineered to deliver high-speed performance and exceptional wear resistance when machining aluminium and other non-ferrous materials. The diamond cutting layer maintains a sharp edge far longer than conventional carbide, which translates into fewer index changes and more uptime on the shop floor. This leads to measurable efficiency gains in batch production and lowers the overall tooling cost per component when abrasive inclusions or non-metallic laminates would otherwise accelerate wear. Consistent part quality thanks to precise geometry and secure clamping A 60° triangular format with a 0.8 mm corner radius and an 11° clearance angle produces repeatable cutting engagement and stable chip formation in turning operations. The insert is supplied with a hole featuring a cylindrical bore and a one-sided countersink (40°–60°) to ensure reliable location and clamping force in standard ISO-compatible toolholders. With a plate thickness of 3.97 mm and ISO form 16T308, the component offers a compact, rigid interface that helps to reduce vibration and improves surface finish on external and internal turning tasks. Easy integration into ISO-based tool systems and selection guidance The indexable insert fits common ISO toolholder systems when matched by form, clearance angle, tolerance class, attachment style, size and thickness. The product is delivered as part of a system that typically comprises the insert, a suitable outer holder or boring bar, a shim/locking set and replacement screws. As the item does not include a chipbreaker, selection of an appropriate chip control strategy and machining parameters is advised for intermittent cuts or when processing long, continuous swarf; consideration of feed, depth of cut and lubrication will preserve the PCD performance and ensure consistent component quality. Contact Metav Werkzeuge for procurement and technical guidance on Tungaloy PCD inserts; for detailed cutting data or compatibility checks email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6809019 Manufacturer SKU: TUN6809019 SKU: 6809019-Tungaloy Model series: ISO indexable turning inserts Material: carbide substrate with PCD cutting layer Facts Size: 16 (ISO designation 16T308) Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 11° Insert angle: 60° Special features Grade: DX140 (PCD) Shape: triangular Hole: cylindrical bore + single-sided countersink (40°–60°) Chipbreaker: none Typical application: external and internal turning Suitable for: aluminium, non-ferrous metals, abrasive non-metals FAQ Which materials is this insert best suited for? The TPGW16T308 DX140 insert from Tungaloy is specifically designed for aluminium, other non-ferrous metals and abrasive non-metallic materials thanks to its PCD cutting layer and the DX140 grade. Is the insert compatible with standard ISO toolholders? Yes; the ISO designation 16T308 and the defined form, clearance angle and thickness ensure compatibility with ISO holders when the correct tolerance class and clamping hardware are used. What is the benefit of the cylindrical hole with countersink? The cylindrical hole combined with a one-sided countersink (40°–60°) provides secure location and reliable clamping, reducing movement under load and promoting consistent cutting geometry across multiple index changes. Are chipbreakers available for this type? This specific insert is supplied without a chipbreaker; chip control must therefore be managed by cutting parameters, toolholder geometry or by selecting an alternative grade with integrated chip control if required. How does the PCD layer affect tool life and productivity? The PCD cutting edge offers significantly longer life on abrasive or non-ferrous workpieces compared with conventional coatings, enabling higher cutting speeds and fewer tool changes, which increases overall production throughput. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 16T308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade and precise geometry for dependable turning operations; order the insert via Metav Werkzeuge or consult their specialists for application-matched recommendations. TPGW16T308 TH10 Tungaloy turning insert — triangular 60° geometry, 0.8 mm corner radius A TPGW16T308 TH10 indexable insert engineered for ISO-compliant external and internal turning, suited to non-ferrous applications and machining tasks that demand low cutting forces and a clean surface finish Triangular ISO insert, 60° cutting geometry Uncoated carbide grade TH10 for low cutting forces 0.8 mm corner radius for accurate profiles Cylindrical hole with 40°–60° countersink for clamping Fast integration with ISO tool systems for reliable production The indexable insert follows the ISO-compliant model series for turning inserts, which simplifies holder selection and reduces setup time. Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness, so matching these parameters to a suitable external holder or boring bar ensures reproducible positioning and minimal runout. For production environments this results in fewer changeovers, predictable cycle times and more consistent part quality. Low cutting forces and improved surface finish with TH10 uncoated carbide The TH10 grade is an uncoated carbide developed as a sharp universal grade for non-ferrous materials and similar applications where a keen cutting edge reduces mechanical loading. This characteristic supports low cutting forces and promotes a cleaner machined surface, particularly in materials that benefit from minimal built-up edge. In practice, the combination of a sharp grade and a moderate 0.8 mm corner radius helps to maintain profile accuracy while limiting burr formation during both external and internal turning. Secure clamping and dimensional stability for repeatable results Designed as a triangular 60° geometry insert with a cylindrical hole and a single-sided countersink (40°–60°), this insert affords stable clamping and repeatable seat location in compatible toolholders. The 3.97 mm thickness provides sufficient support for a range of cutting conditions, while the absence of a chipbreaker indicates suitability for continuous chip flows typical of non-ferrous turning. Together, these design attributes contribute to process reliability and reduced risk of insert displacement during interrupted cuts or marginal toolholder stiffness. Consult Metav Werkzeuge for application-specific recommendations and to reserve the Tungaloy TPGW16T308 TH10 insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6809018 Manufacturer SKU: TUN6809018 SKU: 6809018-Tungaloy Model series: ISO turning indexable inserts Label: TPGW16T308 TH10 Tungaloy insert Facts Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 11° Cutting geometry angle: 60° Countersink angle: 40°–60° Design and features Triangular insert Carbide (uncoated) TH10 No chipbreaker Cylindrical hole with single-sided countersink ISO-series turning insert Suitable for external and internal turning FAQ What materials is this insert suitable for? The TH10 uncoated carbide grade of the TPGW16T308 insert is intended primarily for non‑ferrous materials and applications where a sharp, uncoated cutting edge supports low cutting forces and a clean finish. How is holder compatibility ensured for the insert? Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening arrangement, size and thickness; matching these parameters to an ISO‑compatible holder provides secure seating and repeatable geometry for the Tungaloy turning insert. Does the insert include a chipbreaker? This specific variant is supplied without a chipbreaker, making it well suited to continuous chip formation typical of non‑ferrous turning operations. What clamping features support stability? The insert has a cylindrical hole with a single‑sided countersink (40°–60°) and a triangular shape, which together enable reliable clamping and accurate positioning in compatible toolholders. Which dimensions are critical when ordering a replacement? Key dimensions are the insert size (16 mm), thickness (3.97 mm), corner radius (0.8 mm) and the ISO designation (16T308); these determine fitment in the corresponding holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110304 NS740 Wendeplatten - Tungaloy
Take advantage of the NS740 cermet grade together with a compact triangular geometry and a 0.4 mm corner radius for consistent surface quality in finishing and light machining of steel; order directly via Metav Werkzeuge or request technical advice from their consultants. TPMN 110304 NS740 – Indexable milling insert for finishing (Tungaloy) The TPMN110304 NS740 is an indexable triangular insert for milling, optimised for finishing and light machining of steel in compatible Tungaloy milling systems. NS740 cermet for superior surface finish Triangular form, 11 mm size, 60° cutting angle 0.4 mm corner radius for precise profiling Designed for finishing and light machining of steel Achieve consistent surface quality with a finishing cermet The NS740 grade is a cermet developed for the final machining steps where surface quality and dimensional accuracy are critical. As a finishing insert, it supports stable, uniform wear and reduces the need for rework by delivering predictable results on steel components. The material composition of this grade promotes a fine cutting action that improves finish without sacrificing tool life, making it suitable where aesthetic and tolerance demands matter. Geometry engineered for repeatable accuracy A triangular plate form with an effective cutting angle of 60° and an insert size of 11 mm provides a reliable geometry for shoulder, face and contour milling operations. The 0.4 mm corner radius supports precise profiling while avoiding excessive tool load in finishing passes. With a plate thickness of 3.18 mm and a relief angle of 11°, the insert ensures mechanical stability in the cutter pocket when correctly mounted; note that seat, geometry and cutter body must be compatible within the Tungaloy range for optimal clamping and repeatability. Productivity benefits for milling operations Using a grade optimised for finishing and light machining improves throughput by maintaining consistent wear and stable chip formation over longer sequences. The insert’s design focuses on predictable behaviour during planing, shoulder, slot, high-feed and contour milling (depending on the assigned tool family), which supports tighter process control and less scrap. For production environments prioritising part quality and repeatability, this insert helps reduce cycle time variances and contributes to overall process security. Simple integration into indexable tool systems The insert is supplied for use in a system comprising cutter body, indexable insert, clamping screw and, where applicable, shim or backing. Its triangular form and lack of a centre hole mean compatibility must be checked against the cutter pocket design; correct seating and the clamping screw are essential for reliable performance. Technical advice is available to ensure selection of the appropriate cutter body and clamping hardware so that the insert’s potential for finishing and dimension control is fully realised. For reliable finishing performance with Tungaloy NS740 cermet inserts, contact Metav Werkzeuge for tailored technical advice and order support; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821541 Manufacturer SKU: TUN6821541 Label: TPMN110304 NS740 Tungaloy-Insert Material: Hartmetall Facts Insert designation: 110304 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 11° Hole: without hole Special features Grade/coating: NS740 (cermet) Plate form: triangular Application: finishing and light machining of steel Chipbreaker: without System: for Tungaloy milling systems; seat and geometry must match cutter body FAQ What machining tasks suit this insert best? This insert is intended for finishing and light machining of steel; the NS740 grade provides improved surface quality for face, shoulder and contour milling in compatible Tungaloy tool families. Is the insert compatible with all Tungaloy cutter bodies? Compatibility requires matching of the insert seat, plate geometry and cutter body; confirm that the cutter pocket accepts a triangular TPMN110304 style insert before assembly. What does NS740 mean in practice? NS740 denotes a cermet grade tuned for finishing: it balances wear resistance and cutting-edge quality to deliver consistent surface finish and dimensional accuracy on steel. How many active edges are available per insert? The triangular form provides multiple indexable edges; precise edge count depends on the specific insert orientation and indexing practice used in the tool holder. Are there chipbreakers or centre holes on this insert? This item is supplied without a chipbreaker and without a centre hole; clamping and seat design must account for this specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T5115 and a precise 0.4 mm corner radius to achieve stable cutting edges and consistent performance in cast iron milling; order genuine inserts via Metav Werkzeuge or request consultancy for application matching. TPMN110304 T5115 – Indexable milling insert for milling applications by Tungaloy TPMN110304 T5115 is a triangular indexable insert designed for Tungaloy milling systems, suitable for face, shoulder, slot, high-feed and contour milling where matching insert seat and geometry are required CVD-coated carbide grade T5115 Triangular 11 mm form with 60° cutting angle Corner radius 0.4 mm for precise chamfering Universal for cast iron milling applications Reliable performance for cast iron milling The combination of CVD-coated surface treatment and a carbide substrate in grade T5115 provides a balanced mix of wear resistance and edge stability, which translates into longer component life and fewer unexpected tool changes. For shops machining cast iron, this insert delivers repeatable cutting behaviour under varying cutting conditions. The engineered coating reduces flank wear while the substrate maintains toughness, allowing steady metal removal rates and predictable tool life in both roughing and finishing passes. Geometry engineered to reduce setup time and improve surface quality The triangular form with a nominal size of 11 and a corner radius 0.4 mm offers a compact, stiff cutting edge that supports accurate chamfers and controlled cutting forces. The 11° clearance angle and 60° wedge angle contribute to stable cutting at moderate feeds, minimising vibration and improving surface finish. Because the insert is indexable, a worn edge is rotated out quickly, reducing downtime and contributing to higher machine utilisation without complex regrinding procedures. Coating and substrate: what the technical terms mean for production The label T5115 denotes a CVD-coated carbide grade optimised for cast iron applications, where a compromise between hardness and fracture resistance is necessary. The CVD coating forms a hard surface layer that resists abrasive wear and helps maintain a sharp cutting edge under thermal load, while the carbide core absorbs impact and prevents premature chipping. In practice, this means more consistent part quality over longer cycles and lower tooling cost per component when compared to uncoated alternatives. System compatibility and recommended applications This insert belongs to the Tungaloy range of milling system components and must be used with compatible cutter bodies that match the insert seat and geometry. The typical system includes the milling body, the indexable insert, the clamping screw and, if required, a support pad or shim. Typical operations suitable for this insert are face milling, shoulder milling, slot milling, high-feed milling and contour milling, provided the selected toolholder family matches the insert style and mechanical seat. The insert does not have a hole and comes without an integrated chipbreaker, so selection of the correct tool body and cutting parameters is essential for optimal chip control. For tailored advice or to source original Tungaloy TPMN110304 inserts, contact Metav Werkzeuge for application matching and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6862085-Tungaloy Manufacturer SKU: TUN6862085 Manufacturer article number: 6862085 Brand: Tungaloy Model series: Fräswendeschneidplatten Facts Shape: triangular Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Wedge/cutting angle: 60° Hole: without hole Special features Material: carbide Grade/coating: T5115 (CVD-coated carbide) Application: milling Typical uses: face, shoulder, slot, high-feed, contour milling Chipbreaker: without System components: insert, cutter body, clamping screw, possible support pad FAQ What materials is this insert designed to machine? The TPMN110304 T5115 insert is formulated primarily for machining cast iron, offering a balance of wear resistance and edge stability suitable for a range of cast-iron machining tasks. Which milling operations are suitable for this insert? This triangular indexable insert is suitable for face milling, shoulder milling, slot milling, high-feed and contour milling when used in matching Tungaloy milling systems. How is chip control managed without a chipbreaker? Chip management depends on the chosen cutter body and cutting parameters; the TPMN110304 insert is typically paired with toolholders that include appropriate geometries or pads to aid chip evacuation. Does this insert fit any milling body? The insert must be used with cutter bodies that match the insert seat and geometry; plate seat, insert geometry and milling body must be technically compatible for safe and effective operation. What are the key geometric values to check when matching the insert? Important values include the triangular form, 11 mm size, 3.18 mm thickness, 0.4 mm corner radius and the 11° clearance angle—verify these with the milling body specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 grade, a 60° triangular geometry and a 0.4 mm corner radius for precise, low-force milling results; order the insert directly via Metav Werkzeuge or consult our specialists for system compatibility. TPMN 110304 TH10 triangular milling insert for milling — Tungaloy The TPMN110304 TH10 is a triangular indexable insert designed for milling applications where a sharp, uncoated cutting edge supports low cutting forces and clean surface finish. Sharp TH10 uncoated carbide grade Triangle 11 mm plate, 60° included angle 0.4 mm corner radius for accurate profiling No hole / no chipbreaker for straightforward seating Precise cutting with low cutting forces for non‑ferrous materials The TH10 grade is an uncoated cemented carbide formulation selected for low cutting resistance and consistently clean surfaces when machining non‑ferrous materials. Its sharp edge geometry reduces cutting forces, which helps to lower power consumption and to limit workpiece distortion during sensitive operations. As a result, operators can expect improved dimensional stability and repeatability in tasks such as finishing passes and thin‑walled component milling. Designed for secure system matching and easy integration Compatibility is essential: the insert’s TPMN 110304 geometry must match the corresponding Tungaloy milling body in seat and clamping to ensure safe operation. The triangular plate with an 11 mm size and 3.18 mm thickness fits standard Tungaloy families that accept this ISO code. The simple design — no hole and no chipbreaker — facilitates predictable clamping and straightforward indexing during production changeovers, supporting steady throughput in small and medium batch work. Reliable surface quality across common milling operations This insert is suitable for a range of milling tasks including face, shoulder, slot, high‑feed and contour milling depending on the assigned tool family. The combination of triangular shape, 60° included angle and 0.4 mm corner radius produces sharp entry geometry and consistent edge contact, which contributes to a fine surface finish and reduced burr formation. The TPmN series behaviour supports process stability when machining alloys where chip control is less critical than cutting force reduction. Practical handling and predictable tool life in application‑oriented use Using an uncoated grade means the cutting edge stays very sharp, which is advantageous for operations that prioritise low cutting loads and minimal heat build‑up. While coated grades can extend life in abrasive scenarios, the TH10 insert offers straightforward re‑indexing and economical stock rotation in workshops that process large volumes of aluminium, brass and similar materials. Clear marking of the ISO code and manufacturer SKU simplifies inventory and ensures correct replacement during routine maintenance. Choose the original Tungaloy TH10 triangular insert for consistent low‑force milling and contact Metav Werkzeuge for matching cutter bodies or consultation — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and delivery options Technical data Article number: 6809046 Manufacturer SKU: TUN6809046 SKU: 6809046-Tungaloy Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 60° Relief angle / free angle: 11° Special features Grade: TH10 Material: cemented carbide Coating: uncoated Shape: triangular Hole: none Chipbreaker: none Application: milling Model series: milling indexable inserts System compatibility: for Tungaloy milling systems Typical applications: face, shoulder, slot, high‑feed and contour milling FAQ Which materials is this insert best suited for? The TPmN110304 TH10 insert is optimised for non‑ferrous materials and situations where an uncoated cutting edge gives low cutting forces and a clean surface. Does this insert require a specific milling body? Yes, the TPmN110304 geometry requires a Tungaloy milling body with a matching seat and clamp geometry to ensure secure fixation and correct cutting orientation. How many cutting edges does the triangular insert provide? The triangular shape provides three usable cutting edges per indexable insert; the TH10 grade maintains a sharp uncoated edge suited to finishing and light to medium cutting. Is there a chipbreaker or hole on this insert? No, this insert is supplied without a chipbreaker and without a hole, which simplifies seating and clamping in compatible cutter bodies. What is the manufacturer article number for ordering? The manufacturer article number for the TPmN110304 TH10 is 6809046 (SKU: 6809046‑Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110304 UX30 Wendeplatten - Tungaloy
Combine low cutting forces, reliable chip formation and durable uncoated carbide construction for consistent milling performance; Order the TPMN110304 UX30 Tungaloy insert directly via (Metav Werkzeuge) or ask our consultants if needed. TPMN 110304 UX30 triangular milling insert – Tungaloy The TPMN110304 UX30 is a triangular indexable insert designed for versatile milling operations in Tungaloy milling systems. Sharp cutting edge for low cutting forces UX30 grade, uncoated carbide for clean chips 11 mm triangular insert with 60° cutting angle No chipbreaker, suitable for predictable chip flow Reduced cutting forces for more efficient milling The combination of a sharp cutting edge and the UX30 grade of uncoated carbide reduces cutting resistance, enabling lower power draw and smoother feeding in applications where minimised forces are critical. This results in reduced vibration and improved tool stability during face and shoulder milling. For operations that prioritise energy efficiency or require gentle chip separation, the insert’s geometry supports consistent material removal while maintaining process reliability. Predictable chip formation and surface quality Although the insert is supplied without a chipbreaker, the UX30 grade is formulated for good chip control in many milling tasks, producing coherent chips that ease evacuation. The modest 0.4 mm corner radius contributes to a balanced edge strength and surface finish: smaller radii reduce cutting forces, while the insert’s geometry helps maintain a stable cutting line. The outcome is a dependable surface quality in contour and slot milling where repeatability is required. Seamless integration into Tungaloy milling systems The insert’s triangular form and 60° cutting angle match standard indexable designs; correct seating and clamping are essential. The milling system typically comprises the cutter body, indexable insert, clamping screw and, where needed, a shim. Ensure the cutter body and insert seat geometry are compatible for secure mounting and repeatable indexing. This modular setup supports quick index changes and straightforward inventory management for production shops. Targeted applications and practical benefits Designed for a wide range of milling tasks, this insert is suited to face, shoulder, slot, high-feed and contour milling depending on the assigned tool family. Its profile supports operations where low cutting forces and consistent chip formation are priorities, making it useful in batch production or flexible machining cells. The compact 11 mm size and 3.18 mm thickness allow use in cutters engineered for smaller inserts while maintaining robust performance in intermittent or continuous cuts. For application guidance or to request genuine Tungaloy inserts such as the TPMN110304 UX30, contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6809048 Manufacturer SKU: TUN6809048 SKU: 6809048-Tungaloy Series: Milling indexable inserts Facts Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 11° Hole: none Special features Grade: UX30 (sharp cutting edge) Material: uncoated carbide Shape: triangular Chipbreaker: none Typical applications: face, shoulder, slot, high-feed and contour milling System components: insert, clamping screw, shim as required FAQ What milling tasks is this insert suited for? The TPMN110304 UX30 insert is intended for face, shoulder, slot, high-feed and contour milling, offering low cutting forces and consistent chip formation in compatible tool bodies. Is the insert supplied with a chipbreaker? No, the insert is supplied without a chipbreaker; the UX30 grade promotes predictable chip formation even without a dedicated breaker. How many usable edges does the triangular insert provide? The triangular geometry provides three usable cutting corners, allowing economical indexing and extended overall tool life. Does this insert require a specific clamping method? The insert must be mounted in a matching Tungaloy milling body using the correct clamping screw and, where specified, a shim; seat geometry must be compatible for secure fixation. Is the cutting material coated? The insert is made of uncoated carbide in the UX30 grade, chosen for a sharp cutting edge and good chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110308 NS740 Wendeplatten - Tungaloy
The combination of the NS740 cermet grade and the ISO-standard TPMN110308 geometry ensures high-quality surface finish, predictable wear and economical use of three cutting edges; order the inserts directly via Metav Werkzeuge or consult their application specialists for machining data and tooling compatibility. TPMN 110308 NS740 turning insert (ISO triangular, 0.8 mm) — Tungaloy TPMN110308 NS740 is a triangular ISO turning insert engineered for finishing to light turning of steel, offering stable abrasion behaviour and reliable dimensional control. ISO-standard triangular insert for turning NS740 cermet grade for finishing 0.8 mm corner radius for fine edge control 11° relief angle for reliable seating Precision finishing with consistent wear The NS740 grade is a cermet formulation optimised for finishing and light machining of steel, combining hardness with thermal resistance to promote a uniform flank wear pattern. With a 0.8 mm corner radius and 11° relief angle, the geometry supports improved surface integrity and tighter tolerances while maintaining chip control during low-to-moderate feeds. The ISO-standard form guarantees interchangeability with compatible holders specified by form, tolerance class, clamping and thickness, simplifying tool setup and inventory management. Flexible system compatibility and efficient edge use Designed as an indexable triangular plate, the insert provides three cutting edges, which reduces tooling costs per edge and enhances uptime. The component thickness of 3.18 mm and the ISO designation determine the correct combination of holder, shim and clamping set for secure fixation. This version is supplied without chipbreaker, making it particularly suitable where uninterrupted cutting geometry yields superior surface finish; the absence of a chipbreaker also facilitates manual choice of cutting conditions or use of external chip control measures when required. Application guidance and machining advantages For external and internal turning operations the cermet substrate supports repeatable results when the process emphasises surface quality over heavy material removal. The triangular form and sharp edge preparation enable precise finishing passes, while the grade's wear characteristics extend edge life in light-duty applications. As with all indexable plates, selection of the matching insert grade and seat tolerance should follow the workpiece stability and machining strategy to achieve the intended balance of tool life and surface finish. Contact Metav Werkzeuge to specify Tungaloy TPMN110308 NS740 inserts for precision finishing, or request tailored cutting parameters and stocking options from Metav Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6821542 SKU: 6821542-Tungaloy Manufacturer SKU: TUN6821542 Material: cemented carbide Model series: ISO turning indexable inserts Dimensions & angles Corner radius: 0.8 mm Wedge angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 11 Design & features Plate form: triangular Hole: without hole Chipbreaker: without Grade/coating: NS740 (cermet / coated cermet) Typical application: external and internal turning; finishing to light machining of steel System build: ISO insert, compatible holder, shim/clamp set and replacement screws FAQ What materials is this insert suited for? The Tungaloy TPMN110308 NS740 is intended primarily for finishing and light machining of steel; the NS740 cermet grade emphasises surface quality and even wear for steel applications. How many cutting edges are available per insert? As a triangular plate, the insert provides three usable cutting edges, allowing efficient edge utilisation before indexation or replacement. Is the TPMN110308 compatible with standard ISO turning holders? Yes, the ISO-standard geometry of TPMN110308 determines compatibility by form, relief angle, tolerance class, clamping and thickness; match the holder accordingly. What is the effect of the 0.8 mm corner radius? The 0.8 mm corner radius improves edge strength for finishing passes and contributes to a finer surface finish while maintaining dimensional stability. Does this insert include a chipbreaker? This variant is supplied without chipbreaker, making it suitable where a plain cutting geometry is preferred for superior surface finish in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 110308 T5115 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that balances wear resistance and cutting‑edge stability, paired with a 0.8 mm corner radius and a 60° triangular geometry for dependable finishing and roughing operations; order the insert directly via Metav Werkzeuge or ask the consultants for compatibility and availability. TPMN110308 T5115 Tungaloy indexable turning insert — ISO‑standard triangular insert for turning TPMN110308 T5115 Tungaloy‑Wendeplatte is an ISO‑standard triangular indexable insert designed for general turning tasks, optimised for cast iron with a CVD‑coated carbide grade. ISO‑standard triangular geometry CVD‑coated carbide for cast iron 0.8 mm corner radius for strength 11° clearance angle for chip control Consistent cutting performance for cast iron components The CVD‑coated carbide grade T5115 delivers a well‑balanced combination of wear resistance and edge stability, making the insert particularly suited to machining cast iron. CVD coating creates a hard, thermally stable surface that reduces abrasive wear at elevated temperatures and supports longer tool life. For production environments this means fewer index changes and steadier cycle times, which improves process reliability and reduces unplanned downtime while maintaining surface finish requirements. Practical design for secure clamping and versatile turning The triangular geometry with a 60° included angle and a 0.8 mm corner radius provides a compromise between robustness and profiling capability. The 11° clearance angle reduces rubbing on the flank, improving dimensional control during external and internal turning. As an ISO‑standard insert, compatibility is governed by insert form, clearance angle, tolerance class, clamping method, size and thickness; selecting the correct holder or boring bar ensures repeatable results and safe clamping during heavy or interrupted cuts. Select the right grade and integrate with confidence This grade is a universal choice where cast iron is the primary workpiece material; the T5115 grade is formulated for stable chip formation and reliable wear behaviour across a broad range of cast iron types. When integrating the insert into a machining cell, match the insert to the holder and clamping kit specified for ISO‑compliant triangular plates and consider cutting parameters that favour moderate feed and speed ranges to exploit the coating benefits. For shops aiming to raise throughput, the combination of coating and substrate supports consistent part quality and predictable tool change intervals. Contact Metav Werkzeuge for advice on holder compatibility, batch availability and application‑specific parameter recommendations for this Tungaloy indexable insert; Metav Werkzeuge can also arrange sample sets and further technical information. Technical data Article number: 6862104 Manufacturer SKU: TUN6862104 Metav SKU: 6862104-Tungaloy Name: TPMN110308 T5115 Tungaloy‑Wendeplatte Core measurements Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Plate thickness: 3.18 mm Plate size: 11 mm Designs and special features Shape: triangular Hole: without hole Grade: T5115 (CVD‑coated carbide) Application: turning (external and internal) Series: ISO indexable turning inserts Typical system: ISO insert with matching holder, shim and clamping set FAQ What materials is this insert best suited for? The TPMN110308 T5115 insert is optimised for cast iron applications; the CVD‑coated carbide grade is balanced for wear resistance and edge stability when machining cast iron. How does the 0.8 mm corner radius affect machining? A corner radius of 0.8 mm increases edge strength for sustained cutting and helps achieve consistent surface finish, while still allowing light profiling where required by the application. Is this an ISO‑standard insert and how does that affect holder choice? Yes, the plate conforms to ISO indexable insert standards; holder compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness, so use ISO‑compatible holders and specified clamping sets. Can the T5115 grade be used for interrupted cuts? The T5115 grade offers good edge stability and is suitable for many interrupted cut conditions encountered in cast iron machining, though specific cutting data and holder rigidity should be verified for heavy interruptions. What is the exact product identification for ordering? Order under the designation TPMN110308 T5115 with article number 6862104 (manufacturer SKU TUN6862104) for the Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMN 110308 UX30 Wendeplatten - Tungaloy
Combine efficient material removal with the sharp cutting edge of the UX30 grade and straightforward compatibility with ISO tooling for consistent turning performance. Order the TPMN110308 UX30 insert directly via Metav Werkzeuge or request machining advice from our consultants. TPMN110308 UX30 — Tungaloy turning insert, ISO triangular, 0.8 mm corner radius The TPMN110308 UX30 is an ISO-standard triangular turning insert intended for external and internal turning operations, offering a sharp cutting edge and low cutting-force cutting behaviour for stable chip formation. ISO-standard triangular insert for turning UX30 uncoated carbide for sharp cutting edge 0.8 mm corner radius for fine profile work Compatible with standard 11 mm holders Reliable performance for demanding turning tasks The UX30 grade is an uncoated carbide designed for applications where low cutting forces and controlled chip formation are required. In practice, this means the insert supports stable machining on a range of steels and common engineering materials, reducing vibration and improving surface finish compared with less rigid tooling. The sharp edge geometry results in reduced power draw at the spindle, which benefits cycle times and tool life in many production environments. Clear design and holder compatibility explained The triangular form with an 11 mm size and a 60° included angle provides three usable corners, making the geometry economical for batch work. The 0.8 mm corner radius offers a compromise between edge strength and profile fidelity, suitable for finishing passes and light to medium roughing where a finer radiused edge improves part geometry. Compatibility with holders is governed by insert form, clearance angle, tolerance class, fastening method, size and thickness; selecting a matching ISO holder ensures repeatable clamping and positional accuracy. Selecting the grade and optimising machining parameters Choosing UX30 targets operators seeking a sharp, predictable cutting action rather than heavy-duty interrupted cutting. For best results, pair the insert with appropriate feeds and speeds for the workpiece material and ensure coolant or cutting fluid is applied as required by the workpiece and process. The rake geometry of 11° reduces cutting forces and supports chip flow, while the uncoated substrate simplifies post-process inspection and solder-bonding compatibility where coatings might interfere. Practical handling and application guidance The insert is supplied in the ISO TPMN geometry and is intended to be mounted in standard triangular holders or boring bars designed for 11 mm size inserts and a 3.18 mm plate thickness. The absence of an integral chipbreaker in this design prioritises control through process parameters and holder rigidity rather than relying on a formed chipbed, making it especially suitable for well-fixtured turning operations and precision finishing. Replacement is straightforward: index the next corner to restore cutting quality and maintain productivity. Contact Metav Werkzeuge for sample availability, technical pairing recommendations and delivery options for Tungaloy turning inserts; alternative application advice is available by e‑mail or phone via Metav Werkzeuge. Technical data Article number: 6809056 Manufacturer SKU: TUN6809056 Label: TPMN110308 UX30 Tungaloy-Wendeplatte Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.8 mm Rake angle: 11° Included angle: 60° Plate size: 11 mm Plate thickness: 3.18 mm Design / Special features Shape: triangular Grade: UX30 Substrate: uncoated carbide Chipbreaker: without Hole style: without hole Typical application: external and internal turning FAQ What materials is this insert suited for? The UX30 uncoated carbide insert is designed for turning a wide range of steels and common engineering materials where a sharp cutting edge and good chip formation are required. How many usable corners does the insert provide? With a triangular geometry and a 60° included angle, the insert offers three usable cutting corners before replacement or regrinding is needed. Is there a chipbreaker on this grade? This specific insert is supplied without a chipbreaker; chip control is achieved through process parameters and holder rigidity. What holder specifications are required for mounting? The insert fits standard ISO triangular holders sized for 11 mm inserts and a plate thickness of 3.18 mm; ensure matching clearance and clamping features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160304 AH120 Wendeplatten - Tungaloy
Benefit from PVD-coated carbide AH120, a compact 0.4 mm corner radius and an 11° clearance that together deliver stable cutting and reliable edge life for turning operations; order the TPMN160304 AH120 insert directly via Metav Werkzeuge or request guidance from our consultants. TPMN160304 AH120 – Turning insert (triangular, 11° clearance) by Tungaloy A TPMN160304 AH120 ISO triangular turning insert engineered for external and internal turning applications, offering a PVD-coated carbide grade for wear and fracture resistance. PVD-coated carbide grade AH120 11° clearance for secure cutting Triangular ISO form, three usable edges Suitable for external and internal turning Consistent edge performance through PVD coating and carbide grade The PVD-coated carbide grade AH120 provides a combination of wear resistance and fracture toughness that supports steady performance in turning cycles. The coating reduces abrasive wear and helps to preserve a sharp cutting edge, which in turn improves dimensional consistency and reduces the frequency of tool changes. For operations where process security and repeatable results matter, the PVD-coated surface and the robust carbide substrate extend productive cutting time while maintaining surface quality. Simple compatibility and compact geometry for easy tool changes Designed to the ISO specification, the triangular form gives three usable cutting edges per insert and a compact profile that suits many standard clamping systems. Key geometric data — 16 mm inscribed circle, 3.18 mm thickness and 0.4 mm corner radius — ensure predictable seating and repeatability when replacing inserts. The insert is supplied without a hole, requiring clamping by the holder or screw system specified for the ISO triangle style. Compatibility with a holder is determined by form, clearance, tolerance class, clamping method, size and thickness, which simplifies selection when the holder data is known. Application fit and machining behaviour for turning tasks This insert performs well for both external and internal turning tasks where a balance of a sharp edge and process security is needed. The 11° clearance reduces rubbing on the flank face and promotes controlled chip formation, while the modest corner radius supports both light profiling and general-purpose finishing. Where vibration and fixture rigidity are adequate, the grade is intended to deliver consistent surface finishes and reduced risk of chipping during interrupted cuts. Practical recommendations for selecting and using the insert Choose this insert when the machining strategy values a reliable cutting edge and predictable wear behaviour. If higher edge strength or different surface finish is required, adjust the corner radius or select an alternate chipformer; note that this item is supplied without a chipbreaker. For optimal results, match the insert geometry and grade to the holder and clamping system and consider the workpiece stiffness and cutting parameters to exploit the AH120 grade’s balance of wear resistance and fracture toughness. For availability and technical advice on Tungaloy PVD-coated turning inserts, contact Metav Werkzeuge directly to secure the TPMN160304 AH120 or to discuss suitable holders and operating parameters. Technical Data Article number: 6809059 SKU: 6809059-Tungaloy Manufacturer SKU: TUN6809059 Designation: TPMN160304 AH120 Model series: ISO turning inserts Facts Size (inscribed circle): 16 mm Thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Material: PVD-coated carbide (AH120) Shape: triangular, three cutting edges Chipbreaker: none Mounting: no hole; clamped or screwed in holder Typical use: external and internal turning Notes: wear- and fracture-resistant grade; sharp cutting edge and process security FAQ What is the intended use for this insert? The TPMN160304 AH120 insert from Tungaloy is intended for external and internal turning where a balance of sharp edge geometry and process security is required. How many cutting edges are available per insert? The triangular ISO form gives three usable cutting edges on the TPMN160304 AH120, enabling economical index changes. Which holder type is required for this insert? The TPMN160304 AH120 is ISO-standard triangular and is mounted in compatible triangular holders; compatibility depends on form, clearance, tolerance class, clamping method, size and thickness. Does the insert include a chipbreaker or a central hole? This insert is supplied without a chipbreaker and without a hole; it requires the appropriate clamp or screw fixation in the holder. What are the key dimensions to check when replacing an insert? Check the 16 mm inscribed circle, 3.18 mm thickness, 11° clearance and 0.4 mm corner radius to ensure correct seating and performance of the TPMN160304 AH120. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a precise R0.4 nose radius and ISO conformity for reliable turning operations; order directly via Metav Werkzeuge or consult our specialists for selection support. TPMN 160304 T5115 turning insert — Tungaloy (CVD-coated carbide, for cast iron) TPMN 160304 T5115 is a triangular ISO turning insert designed for external and internal turning, offering a universal grade T5115 for cast iron applications. ISO triangular insert TPMN CVD-coated carbide grade T5115 Optimised for cast iron turning R0.4 nose radius, 11° clearance Consistent cutting performance for cast iron turning The CVD-coated carbide composition and the grade T5115 deliver a balanced combination of wear resistance and edge stability, which translates into predictable tool life and fewer insert changes in batch production. For shops machining cast iron, this leads to lower downtime and a more consistent surface finish. The standardised ISO geometry ensures straightforward replacement of worn inserts without trial fitting, supporting stable production cycles. Precise geometry that improves dimensional control With an 11° clearance angle and a 0.4 mm nose radius, the insert provides a compromise between fine surface quality and robust tool strength. The triangular form with an inscribed circle of 16 mm and a 3.18 mm thickness gives multiple cutting edges per insert, reducing tooling costs per component. These geometric details help maintain dimensional accuracy on turned parts while allowing moderate to aggressive feeds depending on the holder and machine rigidity. Compatibility and system integration for smooth setup The insert is part of the ISO turning insert system and requires a matching external holder or boring bar; compatibility depends on seat form, clearance, tolerance class, clamping method, size and thickness. Using ISO-compatible clamping sets and spare screws simplifies logistics and tool stock management. Selecting an appropriate holder and clamping package ensures optimal chip flow and clamping stability, resulting in fewer regrinds and consistent part quality. Practical benefits and application guidance As a universal choice for cast iron, the insert supports both roughing and semi-finishing when combined with the right machining parameters and a suitable cutting fluid. The absence of a dedicated chipbreaker in this grade means chip control should be matched to the workpiece and process — selecting feeds and depths that promote manageable chip shapes will protect the cutting edge and the workpiece surface. The carbide substrate and CVD coating help sustain cutting edge integrity under interrupted cuts and varying material hardness. For tailored advice on selecting the right Tungaloy TPMN 160304 T5115 turning insert for specific cast iron applications, contact Metav Werkzeuge for a technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862081 Manufacturer SKU: TUN6862081 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 160304 Insert form: Triangular Inscribed circle: 16 mm Thickness: 3.18 mm Clearance angle: 11° Included hole: without hole Special features Grade: T5115 Coating: CVD-coated Nose radius: R0.4 Application: Turning (external and internal) Typical system: ISO insert + holder + clamping kit + replacement screws FAQ What materials is this insert best suited for? The TPMN 160304 T5115 insert is formulated as a universal grade for cast iron, offering a balance of wear resistance and edge stability for common grey and nodular cast irons. Can the insert be used for both external and internal turning? Yes, the ISO geometry of the TPMN 160304 insert suits both external and internal turning operations when paired with a compatible external holder or boring bar. How does the R0.4 nose radius affect finish and strength? A 0.4 mm nose radius provides improved strength at the cutting edge while permitting a good surface finish; it is a compromise between fine finishing radii and heavy-duty cutting edges. Is there a chipbreaker on this grade? This variant is supplied without a chipbreaker, so chip control must be achieved through appropriate feed, depth of cut and holder choice for reliable chip evacuation. Which coating is applied and what advantage does it offer? The insert uses a CVD coating, which enhances wear resistance and edge life under the thermal and mechanical loads typical of cast iron machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cutting edge, low cutting forces and ISO compatibility to improve cycle consistency and surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMN 160304 TH10 ISO turning insert for Drehen — Tungaloy TPMN160304 TH10 is an ISO-indexable triangular insert designed for external and internal turning, offering a sharp, uncoated carbide edge for low cutting forces and clean finishes. ISO indexable turning insert, triangular 60° Uncoated cemented carbide grade TH10 Sharp universal grade for non-ferrous materials 0.4 mm corner radius for precision finishing High-efficiency cutting for non-ferrous and mixed materials The TH10 grade is an uncoated carbide developed as a sharp, universal cutting grade that reduces cutting forces and promotes clean chip formation in non-ferrous materials. This characteristic translates into lower power draw, reduced spindle load and fewer tool changes for many applications. When machining aluminium, Messing or plastics, the combination of a sharp edge and an uncoated substrate helps to avoid built-up edge and to maintain consistent surface finish, minimising downstream reworking and saving production time. ISO compatibility and secure system integration The insert follows ISO geometry and its compatibility with toolholders is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The TPMN family is intended to be combined with a suitable external holder or boring bar, plus a shim/clamping set and replacement screws when required. The standardised form ensures predictable clamping behaviour and repeatable indexing, which supports reliable tool-life planning and reduces setup time across multiple machines. Geometry designed for precision and versatility A triangular plate with a 60° included angle and an 0.4 mm corner radius offers a balance between finishing capability and edge strength. The 11° clearance angle provides effective chip flow and cutting-edge relief while maintaining rigidity in radial engagements. These geometric choices favour precision turning tasks where dimensional accuracy and consistent surface quality are priorities, enabling stable performance in both external profiles and light internal turning. Operational advantages and economic rationale Using an uncoated, sharp cutting grade like TH10 often yields lower machining forces and improved part appearance, especially on softer and non-ferrous workpieces. The cemented carbide substrate provides wear resistance appropriate for general turning tasks without the need for a coating in these applications, offering a cost-effective solution for high-volume or mixed-batch production. Fewer interruptions for tool changes, combined with predictable indexing, contribute to better overall equipment utilisation and process reliability. For dependable turning results with the Tungaloy TH10 insert, contact Metav Werkzeuge for tailored advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6809064 Manufacturer SKU: TUN6809064 SKU: 6809064-Tungaloy Model series: ISO indexable turning inserts Facts Thickness: 3.18 mm Size: 16 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° ISO designation: 160304 Special features Grade/coating: TH10, uncoated Material: cemented carbide Plate form: triangular Hole: without hole Chipbreaker: without chipbreaker Typical application: external and internal turning System components: suitable holder, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The TH10 grade in the TPMN160304 insert is tailored for non-ferrous materials such as aluminium and Messing, and for applications where an uncoated, sharp edge produces low cutting forces and good surface quality. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and finish capability; it helps the TPMN160304 insert deliver narrow tolerances and improved finish on profile turning while still withstanding moderate loads. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO geometry, so compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness to the chosen holder or boring bar. Why choose an uncoated carbide insert for certain jobs? Uncoated cemented carbide like the TH10 grade offers a sharp cutting edge that reduces cutting forces and build-up on softer or adhesive materials, improving surface finish and reducing the need for secondary operations. Does the plate require a specific clamping set or screws? The TPMN160304 is intended to be used as part of a system that includes a compatible holder, an underlay/clamping set and replacement screws as needed for secure fixation and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com