TPMR 110308 NS9530 Wendeplatten - Tungaloy
The supplied product data contains conflicting technical information that prevents a reliable product description. Specifically, the field for material is given as "Hartmetall" (cemented carbide) while the cutting material type is listed as "uncoated cermet" (Schneidstofftyp: unbeschichtetes Cermet). These two material designations refer to different substrate technologies and cannot be treated as equivalent for accurate technical guidance or tooling recommendations. The inconsistency affects essential selection criteria such as cutting parameters, recommended applications and tool life expectations for the article TPMR110308 / SKU 6998567-Tungaloy. Please verify and correct the material specification or the Schneidstofftyp so a full, reliable product description can be produced. For assistance or to submit corrected data, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930.
TPMR 110308 T5115 Wendeplatten - Tungaloy
Benefit from the CVD‑coated carbide T5115 for extended tool life and the ISO‑standard 60° triangular geometry with a 0.8 mm corner radius for stable, repeatable turning operations; order the insert directly via Metav Werkzeuge or contact their consultants for tailored advice. TPMR 110308 T5115 ISO turning insert, CVD‑coated carbide — Tungaloy The TPMR110308-CM T5115 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for cast iron with a balanced combination of wear resistance and cutting edge stability. ISO triangular insert, 60° geometry CVD‑coated carbide grade T5115 Corner radius 0.8 mm for stable cutting Chipbreaker CM for cast iron applications Consistent performance through optimised edge geometry The triangular insert offers a defined 60° included angle and an 0.8 mm corner radius, providing a reliable contact geometry that reduces vibration and maintains dimensional accuracy during turning. The combination of insert geometry and 11° clearance ensures effective chip flow and consistent engagement with the workpiece. For production environments seeking stable cycle times, these design choices translate into fewer part reworks and improved process repeatability. Durable cutting with CVD‑coated carbide for cast iron The CVD‑coated carbide grade T5115 delivers a balanced mix of wear resistance and edge stability tailored to cast iron machining. The coating reduces adhesion and flank wear under typical turning conditions, extending useful tool life while preserving surface finish. Selecting this universal grade with the CM chipbreaker supports moderate to heavy feeds on cast iron workpieces and helps maintain productivity across batch and single‑piece production. Easy integration into standard tooling systems As an ISO‑conforming insert, compatibility with holders is governed by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert’s triangular form, 3.18 mm thickness, and absence of a locating hole allow it to be mounted in common triangular clamp holders and boring bars that accept this ISO designation. This makes retrofitting into existing tool systems straightforward and reduces the need for specialised fixtures while preserving clamping rigidity and repeatable positioning. Contact Metav Werkzeuge for application‑specific recommendations and availability of the Tungaloy TPMR 110308 T5115 insert; their technical team can advise on holder selection, cutting data and batch supply — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: 6864299-Tungaloy Manufacturer article number: 6864299 Manufacturer SKU: TUN6864299 Model series: ISO‑Drehwendeschneidplatten Designation: TPMR110308-CM T5115 Core specifications Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Size: 11 Materials & features Carbide (cemented carbide) CVD coating Grade T5115 Chipbreaker: CM Triangular insert, without hole Application: turning; suitable for cast iron FAQ What materials is this insert best suited to machine? The TPMR110308‑CM T5115 is formulated for machining cast iron; the T5115 grade and CM chipbreaker provide a balance of wear resistance and edge stability for cast iron turning operations. How does the chipbreaker CM affect cutting performance? The CM chipbreaker promotes controlled chip formation in cast iron, improving evacuation and reducing the risk of built‑up edge while supporting consistent surface finish during roughing and semi‑finishing. Is the insert compatible with standard holders? Yes, the ISO‑standard triangular form and specified geometry allow mounting in compatible triangular clamp holders and boring bars that accept this ISO designation. What are the advantages of the CVD coating on this grade? The CVD coating on the T5115 grade enhances wear resistance and reduces adhesion on the cutting edge, which helps extend tool life and maintain surface quality in cast iron turning. How should the 0.8 mm corner radius be used in process planning? A 0.8 mm corner radius offers a compromise between edge strength and fine detail capability; it is suitable for stable turning operations where tool life and dimensional control are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110308 T9225 Wendeplatten - Tungaloy
Benefit from a combination of robust CVD-coated carbide construction, a precise 11° clearance angle and a 0.8 mm corner radius for stable chip control and productive steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPMR 110308 T9225 triangular turning insert for turning — Tungaloy, CVD-coated carbide, 11° The TPMR110308 is an ISO-standard triangular insert engineered for external and internal turning in medium to heavy steel machining, offering a balance of toughness and edge stability for variable cutting conditions. CVD-coated carbide grade T9225 11° clearance angle for stable cutting 0.8 mm corner radius for versatile profiles ISO triangular insert, 3.18 mm thickness Consistent cutting performance through CVD-coated carbide technology The CVD-coated carbide grade T9225 combines a wear-resistant coating with a tough carbide substrate to deliver stable chip formation and extended edge life in mixed cutting conditions. By using a chemical vapour deposition layer, the cutting face gains improved resistance to abrasive wear while retaining substrate toughness, which is particularly valuable when cuts are slightly interrupted or workpiece material varies. This results in fewer indexings and longer tool cycles, supporting higher productivity and lower tooling costs per part. Precise fit and reliable clamping within ISO tool systems Designed as an ISO-norm insert, the triangular geometry and defined dimensions ensure straightforward compatibility with standard external holders and boring bars. The 11° clearance angle reduces rubbing and heat build-up at the flank while maintaining cutting edge support; the 3.18 mm plate thickness provides the rigidity required for stable turning. Clearances, form and tolerance class determine holder compatibility, so the standardised shape minimises setup time and simplifies inventory management across multi-machine environments. Improved edge strength and controlled chipbreaking for steel turning A 0.8 mm corner radius increases edge strength and resists chipping under heavier engagement, while the single-sided chipbreaker supports predictable chip flow and evacuation. Together these features reduce the risk of workpiece damage and contribute to consistent surface finish. For turning operations where alternation of cut depth or interrupted cuts occur, the robust grade and chip control design help maintain process reliability and repeatable part quality. Practical application advice and system considerations For effective use in turning, pair the insert with a matched external holder or boring bar and the correct clamp set; compatibility is determined by insert form, clearance angle and thickness. The insert is primarily intended for steel machining applications under medium to heavy conditions — select the chipbreaker and grade according to workpiece material and machining stability. When in doubt about holder matching or parameter selection, technical consultation is available to determine optimal cutting data and to align the insert within a complete tooling system. For robust, versatile steel turning with Tungaloy's T9225 grade, contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781107 SKU: 6781107-Tungaloy Manufacturer SKU: TUN6781107 Facts Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Size: 11 Shape: triangular Grade/coating: T9225, CVD-coated carbide Intended application: turning (external and internal) Special features Single-sided chipbreaker ISO-standard insert For medium to heavy steel turning Compatible with ISO holders and clamp sets Robust universal grade for variable cutting conditions FAQ What materials is this insert suitable for? The TPMR110308 in grade T9225 is designed primarily for steel machining, offering robust performance in medium to heavy turning operations. Is the insert compatible with standard ISO holders? Yes. The insert is ISO-standard triangular and its compatibility with holders is determined by form, clearance angle, tolerance class, fastening method and plate thickness. What does the T9225 designation mean? T9225 denotes a CVD-coated carbide grade tuned for a balance of wear resistance and toughness, suitable for variable engagement and slightly interrupted cuts. How does the 0.8 mm corner radius affect machining? A 0.8 mm radius increases edge strength and improves resistance to chipping, supporting better surface finish and longer edge life in heavier cuts. Can this insert be used for internal turning? Yes. The insert is suitable for both external and internal turning when paired with the appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110308 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for variable cutting conditions and a 0.8 mm corner radius paired with an 11° relief for stable performance in medium-to-heavy Stahl turning; order via Metav Werkzeuge or consult our specialists for process matching. TPMR 110308 T9225 — Turning insert by Tungaloy TPMR 110308 T9225 is an ISO triangular indexable insert designed for robust medium-to-heavy Stahl turning, offering a universal grade and secure compatibility with ISO holders. CVD-coated carbide T9225 grade Universal grade for medium-heavy Stahl ISO triangular 60° geometry 0.8 mm corner radius, 11° relief One-sided chipbreaker Reliable cutting performance for mixed conditions The CVD-coated carbide composition in this grade delivers a balance of hardness and toughness that suits interrupted cuts and varying engagement. The T9225 grade is formulated as a robust universal option for Stahl machining, providing consistent tool life where fluctuating cut depth or intermittent contact demands higher fracture resistance. The single-sided chipbreaker supports controlled chip formation, reducing risk of built-up edge and improving process stability under moderate to heavy cut loads. Precise geometry for repeatable results and secure clamping The triangular 60° plate form and 0.8 mm corner radius yield a predictable cutting edge for external and internal turning, while the 11° relief angle helps avoid rubbing on the flank, reducing heat and improving surface finish. The insert’s ISO designation ensures compatibility is determined by shape, relief angle, tolerance class, fixing method, size and thickness — the system comprises the insert, a matching external holder or boring bar, and the appropriate shim or clamp set. The measured geometry supports repeatable positioning and safe torque transmission in high-productivity setups. Practical selection and integration in the toolroom When specifying an indexable solution, match the T9225 chipbreaker and grade to the workpiece and cycle stability rather than relying on a single parameter. For turning Stahl with variable conditions, this insert offers a pragmatic trade-off between wear resistance and toughness. Spare screws and proper clamping ensure stable seating; consider the holder’s tolerance class and seat fit during selection. If uncertain about the optimal chipbreaker or cutting data for a given application, technical advice is available to align cutting speed, feed and depth of cut with workshop requirements. Contact Metav Werkzeuge for tailored cutting data, availability of Tungaloy TPMR 110308 T9225 inserts and expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781099 Manufacturer SKU: TUN6781099 SKU: 6781099-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Designation: TPMR110308 Grade / coating: T9225 (CVD-coated) Radius: 0.8 mm Relief angle: 11° Included angle: 60° Special features Plate form: triangular Plate size: 11 Plate thickness: 3.18 Hole: ohne Loch Chipbreaker: einseitig Application: Drehen FAQ What materials is this insert best suited for? The TPMR 110308 T9225 insert is optimised for medium-to-heavy Stahl machining; the T9225 grade combines toughness and wear resistance for variable cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; verify these parameters against the TPMR110308 specifications before mounting. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge strength and extends tool life under heavier cuts while supporting acceptable surface finish for most turning operations. Is the T9225 coating suitable for interrupted cuts? Yes, the CVD-coated T9225 grade is designed to withstand slightly interrupted cuts and changing engagement thanks to its enhanced toughness. What geometry-specific benefits does the 60° triangular shape provide? The 60° triangle provides three usable cutting edges per indexable plate and good versatility for both external and internal turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110308 T9225 Wendeplatten - Tungaloy
Robust CVD-coated cemented carbide grade T9225, triangular 60° geometry and a 0.8 mm corner radius deliver dependable performance for medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult the technical advisers for application guidance. TPMR 110308 T9225 ISO turning insert — triangular 60°, 0.8 mm radius | Tungaloy A TPMR 110308 T9225 ISO triangular turning insert engineered for external and internal turning in medium-to-heavy steel machining with a PS chipbreaker for reliable chip control ISO triangular insert, 60° geometry CVD-coated cemented carbide grade T9225 0.8 mm corner radius for precise profile work PS chipbreaker optimised for steel turning Reliable productivity for medium-to-heavy steel turning The CVD-coated cemented carbide grade T9225 combines toughness and wear resistance to maintain cutting edge stability under variable engagement and light interruptions. In practice, this means sustained component quality and fewer insert changes during continuous production runs. The coating supports thermal and abrasive resistance while the substrate offers the fracture toughness required for interrupted cuts, translating into a measurable increase in machining uptime and predictable tool life for steel applications. Geometry and chip control that stabilise the process The triangular 60° shape with a 0.8 mm corner radius and PS chipbreaker delivers a balance between profile definition and secure chip formation. The chipbreaker design controls swarf flow and reduces the risk of built-up edge, which improves surface finish and reduces secondary operations. A 11° clearance angle reduces rubbing on the flank, lowering cutting forces and heat generation; these geometric choices together enable repeatable turning results, especially when consistent component tolerances and surface quality are required. ISO compatibility and practical tool system integration As an ISO-series turning insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness. Key dimensions: inscribed circle 11 mm, insert thickness 3.18 mm, triangular plate with no hole. The insert is supplied in the ISO format and is intended to be used with matching external holders or boring bars, together with an appropriate clamping set and replacement screws to ensure safe seating and repeatable positioning within the tool system. Clear indication of these parameters simplifies tool selection and reduces setup time on the shop floor. For assured, cost-effective performance in demanding steel turning operations, choose the Tungaloy T9225 ISO inserts from Metav Werkzeuge and request tailored selection advice from our technical consultants at Metav Werkzeuge. Technical data Article number: 6781067 SKU: 6781067-Tungaloy Manufacturer SKU: TUN6781067 Label: TPMR110308-PS T9225 Model series: ISO-Drehwendeschneidplatten Designation: TPMR110308-PS Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Insert thickness: 3.18 mm Inscribed circle: 11 mm Geometry angle: 60° Clearance angle: 11° Special features CVD-coated cemented carbide grade T9225 PS chipbreaker Triangular plate (no hole) ISO-series turning insert Application: external and internal turning FAQ What is the primary application of this insert? The TPMR110308-PS T9225 insert is designed for external and internal turning, particularly suited to medium-to-heavy steel machining. Which materials is this insert suitable for? The CVD-coated cemented carbide grade T9225 is optimised for steel machining, providing the toughness and wear resistance needed for variable engagement and light interruptions. How can compatibility with existing holders be ensured? Compatibility depends on matching the insert form, 11° clearance angle, tolerance class, fastening method, size (inscribed circle 11 mm) and thickness (3.18 mm); check these parameters against the holder specification. Is the grade suitable for interrupted cuts? Yes — the robust character of the T9225 grade provides additional toughness for interrupted or variable cutting conditions, improving resistance to chipping. What chip control does the insert offer? The PS chipbreaker is designed to produce short, controllable chips in steel turning, supporting consistent surface finish and safer chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110308 TH10 Wendeplatten - Tungaloy
The compact ISO triangular insert in uncoated carbide TH10 with a 0.8 mm nose radius delivers low cutting forces and clean surface finish; compatibility with the clamping system is ensured when form, 11° relief angle and 3.18 mm thickness are matched. Order directly via Metav Werkzeuge or consult technical advisors for holder verification and delivery options. TPMR110308 TH10 Tungaloy turning insert — ISO triangular insert, 0.8 mm nose radius The TPMR110308 TH10 Tungaloy insert is an ISO-format turning insert optimised for external and internal turning, particularly suited to non-ferrous materials and applications where a sharp, uncoated cutting edge supports low cutting forces and neat surface quality ISO-format triangular turning insert Uncoated carbide grade TH10 0.8 mm nose radius for fine cuts Single-sided chipbreaker for clean chips Consistent cutting with a sharp, uncoated grade The TH10 grade is an uncoated carbide designed as a sharp universal option for non-ferrous alloys and situations that benefit from reduced cutting forces. The combination of a keen cutting edge and the material properties of carbide supports improved surface finish and reduced built-up edge on soft, gummy materials. In machining terms, an uncoated edge often gives a lower friction start and can extend effective tool life in applications where coating adhesion or thermal loading is not the primary constraint. The description is aligned with ISO-format expectations and offers reliable, repeatable performance in shop-floor production. Geometry and system compatibility for flexible tooling The insert follows ISO plate geometry and must be matched to holder characteristics: form, 11° relief angle, tolerance class, clamping method, size and 3.18 mm plate thickness determine fit and stability. The triangle shape with a 60° included angle and a 0.8 mm nose radius balances edge strength and the ability to reach tighter profiles; a smaller radius improves detail and surface finish, whereas larger radii increase corner strength. Correct pairing with an appropriate external holder or boring bar, plus a suitable shim/clamp set and replacement screws, ensures secure seating and repeatable positioning in production setups. Chip control and operational benefits for turning tasks A single-sided chipbreaker on this insert is aimed at producing predictable, segmented chips and supporting steady evacuation during both external and internal operations. Chipbreaker geometry should be selected in conjunction with the grade and the workpiece material to match the desired feed and depth of cut while reducing recutting of chips. Specifying the 0.8 mm radius and the TH10 grade enables fine finishing passes as well as light to moderate roughing on non-ferrous components; choosing the correct chipbreaker and ensuring machine-tool rigidity will result in stable cutting and cost-effective machining. For technical guidance on integrating Tungaloy turning inserts into existing toolholders, or to secure immediate availability via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and order processing. Technical data Article number: 6809122 Manufacturer SKU: TUN6809122 SKU: 6809122-Tungaloy Model series: ISO turning inserts Material: carbide Grade: TH10 Numeric data Nose radius: 0.8 mm Relief angle: 11° Included angle: 60° Plate thickness: 3.18 mm Plate size: 11 Design & features Shape: triangle Hole: without hole Chipbreaker: single-sided Application: turning (external and internal) Typical system: ISO insert + external holder or boring bar + shim/clamp set + replacement screws FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is formulated for non-ferrous materials and applications where a sharp edge and low cutting forces support a clean surface finish; the TPMR110308 TH10 turning insert performs particularly well on such alloys. How does the 0.8 mm nose radius affect machining results? A 0.8 mm radius provides a balance between edge strength and surface quality: it enables finer finishes and access to smaller features while maintaining sufficient durability for light to moderate cutting loads with the TH10 grade. Which holder characteristics must be checked for compatibility? Compatibility depends on holder form, clearance (relief) angle, tolerance class, clamping method, plate size and thickness; matching the 11° relief angle and 3.18 mm thickness to the holder ensures secure seating and accurate positioning. Is the insert coated? No; this insert is an uncoated carbide grade (TH10), chosen to reduce cutting forces and improve finish on suitable materials rather than relying on coating technology. What chip control can be expected from the insert? The single-sided chipbreaker is designed for predictable chip formation and efficient evacuation in turning operations, supporting steady machining and reduced recutting of chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 AH725 Wendeplatten - Tungaloy
Efficient, PVD-coated carbide insert with an 11° clearance angle and 0.4 mm nose radius for reliable, chip-resistant turning of steel and stainless steel; benefit from consistent process security and simple ISO compatibility — order directly via Metav Werkzeuge or consult our specialists for application support. TPMR 160304 AH725 Turning Insert — ISO triangular, PVD-coated carbide (Tungaloy) TPMR 160304 AH725 is a triangular, ISO-standard turning insert designed for external and internal turning; suitable for demanding, variable-material applications where process reliability is essential. PVD-coated carbide, AH725 universal grade ISO-standard triangular insert for turning 11° clearance angle for stable cutting 0.4 mm nose radius with single-sided chipbreaker Consistent performance with a universal PVD grade The AH725 grade combines a PVD-coated surface with a robust carbide substrate to deliver extended tool life and predictable wear behaviour. This universal grade is formulated for machining both steel and stainless steel, giving high process security across mixed production batches. The coating reduces built-up edge and improves surface finish; the result is fewer stoppages for insert changes and a more uniform part quality. For operations that require repeatable results on small holders or where workpiece material varies, this grade minimises unexpected tool failure and supports stable cycle times. Geometry and system compatibility that support accuracy The insert’s ISO designation and triangular form ensure straightforward integration with standard holders; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. With an 11° clearance angle and a 0.4 mm nose radius, the geometry balances robustness and detail: the clearance reduces rubbing and heat, while the nose radius contributes to surface integrity and vibration dampening. The thickness of 3.18 mm and the 60° included angle provide rigidity in the cutting zone. These parameters are selected to maintain dimensional accuracy and reduce chatter in both external and internal turning tasks. Practical integration and chip control for daily production The insert is supplied without a hole and features a single-sided chipbreaker, making it suitable for many standard clamping systems and for operators who need consistent chip formation. The system build normally includes a matching external holder or boring bar, a backing/support set and replacement clamping screws; correct pairing is essential for secure clamping and repeatable results. By choosing the appropriate chipbreaker and the AH725 grade for mixed-material runs, the indexable insert supports safer, more economical machining and reduces rework. Production planners will value the predictability and the reduced need for ad hoc adjustments during shifts. For secure, process-safe turning with Tungaloy quality, contact Metav Werkzeuge for availability of the TPMR 160304 AH725 insert (SKU 6862332-Tungaloy) and tailored application advice. Technical Data Article number: 6862332 SKU: 6862332-Tungaloy Manufacturer article number: TUN6862332 Model series: ISO turning indexable inserts Designation: TPMR160304 AH725 Dimensions & core data Size: 16 mm Thickness: 3.18 mm Clearance angle: 11° Nose radius: 0.4 mm Included angle: 60° Materials & features Grade: AH725 (PVD-coated) Material: Carbide Plate shape: triangular Chipbreaker: single-sided Hole: without hole Application: turning (external and internal) Typical system: insert + holder/boring bar + backing/klemmsatz + spare screws FAQ What materials is this insert suitable for? The AH725 grade is geared towards steel and stainless steel machining; the TPMR 160304 insert provides reliable chip control and wear resistance when these materials are processed. Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO form and the specified geometry make the insert suitable for both external and internal turning operations when paired with an appropriate holder. How is compatibility with holders determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening type, size and thickness; the ISO designation simplifies selection of a matching external holder or boring bar. What are the advantages of the AH725 PVD coating? The PVD layer improves thermal resistance, reduces adhesion of workpiece material and stabilises the cutting edge, which leads to longer life and fewer interruptions in production when using the AH725 grade. Is the chipbreaker suitable for mixed-material production? The single-sided chipbreaker offers consistent chip formation for many turning scenarios; selecting the correct chipbreaker and grade helps maintain process security across varying workpiece materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated cermet grade that reduces cutting forces and delivers superior surface finish; the triangular format with a 0.4 mm corner radius and 11° clearance ensures stable clamping and predictable results in finishing operations. Order inserts directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. TPMR160304 NS9530 turning insert — triangular insert, 0.4 mm radius, 11° clearance | Tungaloy The TPMR160304 NS9530 is an ISO‑standard triangular turning insert designed for precision finishing of steel in continuous turning applications. ISO‑standard triangular insert Uncoated cermet NS9530 for fine finishing Corner radius 0.4 mm for consistent surface 11° clearance and one‑sided chipbreaker Superior surface finish with lower cutting forces The uncoated cermet composition NS9530 is engineered as a finishing grade that provides a very sharp cutting edge and reduced cutting forces, which directly benefits surface quality when turning steel. The low edge strength of the grade is deliberate: it produces minimal built‑up edge and promotes stable cutting at small depths of cut, making it ideal for continuous fine finishing and short‑chip formation. The combination of the 0.4 mm corner radius and the sharp cermet enables improved plateaus and reduced need for secondary finishing, translating into shorter process chains and less rework. Consistent fit and straightforward mounting for productivity Compatibility with the toolholder is governed by geometry: form, clearance angle, tolerance class, fastening method, size and thickness. The ISO designation guarantees interchangeability with holders designed for the TPMR form; the 11° clearance eases chip flow while maintaining a controlled shear zone. The insert is supplied without a hole, requiring a compatible clamp or screw system; the triangular format provides three usable cutting edges per insert, improving cost efficiency per edge change. Clear identification of size and thickness allows predictable seating and repeatable runout, which reduces set‑up time and improves first‑pass yield. Improved process stability during continuous turning A one‑sided chipbreaker tailored for finishing supports consistent chip formation in uninterrupted cuts, keeping forces steady and avoiding vibration at light feeds. The triangular geometry contributes to mechanical stability in the clamping pocket, while the thin 3.18 mm thickness balances rigidity with accessibility in tight turning envelopes. Where small depth‑of‑cut finishing is required, the combination of grade and geometry affords a reliable tool life, ensuring repeatable dimensional results and a stable surface roughness across batches. Economical finishing with predictable results For high‑volume finishing where repeatability matters, the insert delivers predictable performance and lower overall process cost. The NS9530 grade’s emphasis on surface finish reduces dressings and downstream polishing. Traceable identifiers—manufacturer SKU and article numbers—support inventory management and reorders; the ISO‑compliant system structure simplifies sourcing of matching holders, shims and replacement screws, promoting lean production workflows. The net result is a finishing solution that is technically clear, practical and designed for productive turning operations. Contact Metav Werkzeuge today for application advice or to request a quotation referencing SKU TUN6998568; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998568 Manufacturer SKU: TUN6998568 Stock keeping unit: 6998568-Tungaloy Model series: ISO‑turning insert series Material: carbide Facts Insert designation: TPMR160304 Size: 16 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: triangular Hole style: without hole Chipbreaker: one‑sided Application: turning FAQ What materials is this insert suited for? The NS9530 finishing grade is optimised for steel; the TPMR160304 insert performs best in continuous turning operations on steel where a high surface finish is required. Is this insert compatible with standard TPMR holders? Yes. The TPMR160304 follows ISO geometry so compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening and pocket thickness. How many cutting edges are available per insert? The triangular format provides three usable cutting edges; rotation yields multiple dressings before the insert must be replaced. What is the function of the one‑sided chipbreaker? The one‑sided chipbreaker is configured for finishing: it supports short, controlled chip formation suitable for continuous cuts and helps maintain low cutting forces and a stable surface finish. Which identifiers should be used when reordering? Use the article number 6998568 and manufacturer SKU TUN6998568 when reordering to ensure the correct TPMR160304 NS9530 Tungaloy turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing‑grade uncoated cermet and precise ISO geometry for consistent surface quality and low cutting forces; order directly via Metav Werkzeuge or contact the consultants for application guidance. TPMR 160304 NS9530 — ISO triangular turning insert by Tungaloy for finishing operations TPMR 160304-23 NS9530 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a finishing grade optimised for steel machining ISO‑standard triangular insert for turning Uncoated cermet NS9530 for high surface finish Sharp cutting edge for low cutting forces Suitable for continuous cuts and fine finishing High‑quality finishing with uncoated cermet for steel The insert uses an uncoated cermet grade (NS9530) developed for finishing steel where a sharp cutting edge and low cutting forces are decisive. Cermets combine ceramic and metallic phases to produce a hard, wear‑resistant cutting edge with excellent thermal stability; this makes the grade particularly effective in continuous cut scenarios and where small depths of cut are used. The result is improved surface finish and reduced tendency for built‑up edge, which supports repeatable part quality in serial production. Emphasis on edge sharpness reduces cutting energy and contributes to longer tool life under finishing conditions. Consistent seating and geometry for stable turning results The ISO design of the triangular insert ensures predictable seating in compatible holders: the combination of the 60° included angle, 11° relief angle and a 0.4 mm nose radius yields a balance between edge strength and surface quality. Compatibility with a toolholder depends on form, relief, tolerance class, clamping method, size and thickness; correct pairing secures stable chip formation and lowers vibration. The controlled geometry benefits dimensional consistency and reduces rework, especially when paired with a correctly rated external holder or boring bar and standard shim/clamp kits. System approach for efficient shopfloor use Planning the cutting operation around this insert supports process efficiency: the TPMR160304-23 format works within ISO holder systems and pairs with a matching chipbreaker (type 23) to control chip flow during finishing. The recommended system comprises the indexable insert, a matching external holder or boring bar, and the appropriate shim/clamp and replacement screws for secure mounting. This configuration minimises downtime for insert changes and helps maintain steady cycle times, while the finishing‑oriented cermet reduces the need for multiple passes to achieve target surface roughness. For precise finishing of steel components with Tungaloy's NS9530 grade, contact Metav Werkzeuge for expert advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998629 Manufacturer SKU: TUN6998629 Label: TPMR160304-23 NS9530 SKU: 6998629-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Application: Drehen Facts Included angle: 60° Relief angle: 11° Nose radius: 0.4 mm Plate size: 16 mm Plate thickness: 3.18 mm Special features Uncoated cermet grade NS9530 Finishing grade for steel machining ISO triangular plate form (TPMR) Chipbreaker type 23 No hole (without hole) Compatible with ISO holders depending on form, relief, tolerance, clamping, size and thickness System composition: insert + external holder/boring bar + shim/clamp + replacement screws FAQ What materials is this insert intended for? The TPMR160304-23 NS9530 is specified as a finishing grade for steel and performs best where a sharp edge and low cutting forces are required. Can this insert be used for internal and external turning? Yes, the triangular ISO geometry permits use in both external and internal turning when mounted in a suitable holder or boring bar. What does the chipbreaker 23 indicate? Chipbreaker 23 denotes the chip control geometry optimised for finishing cuts and continuous chip formation with this insert geometry and grade. How does the 0.4 mm nose radius affect the finish? A 0.4 mm nose radius provides a compromise between edge strength and surface quality; with the NS9530 cermet, it helps achieve fine surface finishes while maintaining adequate edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a 0.4 mm nose radius and ISO conformity for reliable turning of cast iron components; order directly via Metav Werkzeuge or contact our consultants for application advice. TPMR 160304 T5115 — TPMR turning insert, CVD-coated carbide, Tungaloy The TPMR160304 T5115 is an ISO-standard triangular indexable insert for external and internal turning, optimised for cast iron with a balanced mix of wear resistance and edge stability. CVD-coated carbide for cast iron machining ISO-standard triangular insert, 16 mm size 11° clearance angle and 0.4 mm nose radius Consistent cutting performance for cast iron components The triangular indexable insert is supplied in an ISO format that simplifies tool selection and replacement. The CVD-coated carbide grade T5115 is formulated to offer a stable cutting edge and improved wear resistance when machining cast iron, resulting in fewer change-overs and longer uninterrupted run times. The 0.4 mm nose radius provides a dependable compromise between edge strength and surface finish; a larger radius increases edge life, whereas a smaller radius favours finer detail. Compatibility with holders is determined by form, clearance angle, tolerance class, attachment method, size and thickness, so standard ISO dimensions ensure interchangeability across common turning tool systems. Improved chip control and process reliability Equipped with a single-sided chipbreaker, the insert promotes controlled chip formation during both external and internal turning operations. Stable chip behaviour reduces the likelihood of rework and downtime, which contributes directly to higher throughput and consistent surface quality. Explaining the technical term: a chipbreaker guides and segments chips to avoid long, entangling swarf and to maintain cutting stability. Selecting the correct chipbreaker and grade for the workpiece and machining conditions helps to achieve predictable tool life and repeatable results, supporting process optimisation in production environments. Practical geometry and mounting benefits for workshop use The insert’s 16 mm triangular form with a thickness of 3.18 mm and an 11° clearance angle fits ISO-compatible holders and boring bars without modification, simplifying inventory and fixture planning. The absence of a mounting hole and the standard 60° included angle are relevant for clamping and corner strength; the triangular geometry provides three usable cutting corners, which improves cost efficiency per edge. For workshops focusing on cast iron components, the combination of ISO conformity, straightforward mounting and the T5115 grade supports predictable cycle times and reduced tooling management overhead. Contact Metav Werkzeuge for advice on matching the TPMR 160304 T5115 insert to specific holders and cast iron applications — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6864803 SKU: 6864803-Tungaloy Manufacturer SKU: TUN6864803 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten ISO designation: TPMR160304 Grade: T5115 Insert form: triangular Size: 16 mm Thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Nose radius: 0.4 mm Facts Radius: 0.4 mm Thickness: 3.18 mm Size: 16 mm Clearance angle: 11° Included angle: 60° Special features CVD-coated carbide grade T5115 Single-sided chipbreaker ISO-standard indexable insert No central hole (without hole) Designed for external and internal turning Recommended for cast iron machining FAQ What types of turning operations is this insert suited for? The TPMR160304 T5115 triangular insert is intended for both external and internal turning operations; its geometry and chipbreaker make it particularly suitable for machining cast iron components. How does the T5115 grade affect tool life and edge stability? The CVD-coated T5115 grade on the TPMR160304 insert balances wear resistance and edge stability, extending effective cutting life when machining cast iron while maintaining consistent surface integrity. Which holder dimensions and features must be matched for correct fitting? Compatibility is driven by insert form, clearance angle, tolerance class, attachment method, size and thickness; use an ISO-compatible triangular holder sized for 16 mm inserts with a 3.18 mm thickness to fit the TPMR160304. Can the insert be used on materials other than cast iron? The TPMR160304 is optimised for cast iron; selection for other materials should be based on the workpiece, machining strategy and stability, and may require a different grade or chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, ISO interchangeability and a fine 0.4 mm corner radius for precise, productive turning operations; order TPMR160304-23 T9215 directly via Metav Werkzeuge or contact our consultants for application guidance. TPMR 160304 T9215 — ISO triangular turning insert, CVD-coated carbide, for turning TPMR160304-23 T9215 is an ISO‑standard triangular turning insert designed for medium‑strength steel machining, offering high wear resistance and fracture safety for continuous to slightly interrupted cuts. CVD-coated cemented carbide grade T9215 ISO triangular insert for turning 0.4 mm corner radius for fine profiles Suited for continuous to slight interrupted cuts Consistent wear resistance for sustained production The CVD-coated cemented carbide composition provides a balance of wear resistance and fracture toughness, enabling longer tool life under typical shopfloor conditions. This makes the insert particularly effective for sustained runs where predictable performance reduces unplanned tool changes. The protective coating also improves edge stability at elevated contact temperatures, supporting higher productivity without compromising component quality. Controlled chip formation and improved surface finish Equipped with chipbreaker designation 23, the insert promotes reliable chip control, reducing the risk of tangling and improving process safety. A well‑matched chipformer ensures shorter, controllable chips that ease swarf evacuation and help maintain consistent surface integrity. For engineers unfamiliar with chipbreakers: the geometry redirects and segments swarf, which in turn lowers cutting forces and helps achieve repeatable finishes on medium steels. Clear ISO compatibility reduces setup time As an ISO insert, the form, clearance angle and tolerance class facilitate straightforward matching to compatible external holders or toolposts. The specified 11° clearance angle and plate thickness of 3.18 mm are standardised values that aid quick tool changes and predictable clamping behaviour. This interchangeability translates into reduced setup time and less inventory complexity for workshops running multiple machines. Practical selection guidance for turning applications The fine 0.4 mm radius favours profiling and finishing passes where edge definition matters, while the triangular form allows three usable cutting corners per insert for economical use. Select this grade when machining medium‑strength steel in continuous to slightly interrupted cuts; for heavier interruption or very hard materials, consider grades and chipbreakers optimised for those conditions. Workshops and CNC shops benefit from the combination of repeatable performance and economical indexability offered by this insert. For application advice or to request TPMR160304-23 T9215 from Tungaloy for your turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to receive tailored recommendations and rapid supply. Technical Data Article designation: TPMR160304-23 T9215 Label / product name: TPMR160304-23 T9215 Manufacturer: Tungaloy Manufacturer SKU: TUN6774036 Our SKU: 6774036-Tungaloy Dimensions & Angles Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 16 mm Materials & Features Material: cemented carbide (Hartmetall) Coating / grade: CVD, T9215 Chipbreaker: 23 Plate form: triangular Hole style: without hole Application: turning Series: ISO turning inserts Typical use: medium‑strength steel, continuous to slight interrupted cuts FAQ Is this insert compatible with standard ISO triangular holders? Yes. The TPMR160304-23 T9215 is an ISO‑standard triangular insert and is compatible with holders that accept ISO triangular inserts with matching form, thickness and tolerance class. Which materials is this grade intended for? The T9215 grade is formulated for medium‑strength steels; TPMR160304-23 T9215 delivers a combination of wear resistance and fracture safety suited to continuous to slightly interrupted turning operations. What does the chipbreaker 23 mean for machining? Chipbreaker 23 on this insert provides controlled chips for safe swarf handling and improved surface finish; it is effective for typical steel turning tasks where consistent chip segmentation is required. How many usable cutting edges does a triangular insert offer? A triangular insert like TPMR160304-23 T9215 offers three indexed corners, allowing economical reuse of the cutting edges before replacement. Is the 0.4 mm corner radius suitable for finishing work? Yes; the 0.4 mm corner radius supports finer profiles and improved surface quality in finishing or semi‑finishing passes when paired with the correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, precise 60° triangular geometry and a 0.4 mm corner radius for consistent, high-productivity turning of medium steels; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. TPMR160304 T9215 ISO triangular turning insert by Tungaloy — CVD-coated carbide, 60° form TPMR160304 T9215 is an ISO‑standard triangular turning insert designed for reliable external and internal turning of medium steels, delivering wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 60° triangular ISO form for turning 0.4 mm corner radius for fine profiles Single-sided chipbreaker, 11° relief angle Improved productivity for medium-steel turning The insert combines a CVD-coated surface with a cemented carbide substrate to provide elevated wear resistance while maintaining fracture toughness under stable cutting conditions. This makes it particularly suited to medium-steel applications where operators require steady metal removal rates and reproducible tool life. The coating reduces built-up edge and helps maintain a consistent cutting edge, so machining cycles remain efficient and predictable, which in turn supports higher throughput and lower tooling costs per component. Geometry and edge form for consistent part finish A 60° triangular geometry offers versatile approach angles for both external and internal turning operations. The 0.4 mm corner radius supports the creation of fine radii and controlled transitions, improving surface integrity without excessive cutting forces. The 11° relief angle and single-sided chipbreaker are optimised to control chip formation during continuous to slightly interrupted cuts; this reduces vibration and promotes steady contact between insert and workpiece, resulting in more consistent dimensional accuracy and repeatable surface quality. Robust grade for stable machining and longer tool life Grade T9215 is CVD-coated and engineered as a first choice for medium steel machining where a balance of wear resistance and fracture protection is required. Its composition and coating chemistry enable longer tool life under sustained operation and help mitigate flank wear in high-volume production. For manufacturers aiming to reduce downtime and improve process reliability, this grade supports predictable replacement intervals and contributes to overall process cost savings. Compatibility, handling and application guidance The insert is ISO‑designated and intended to fit compatible triangular holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. With a plate size of 16 and a plate thickness of 3.18 mm, the insert is supplied without a hole and with a one-sided chipbreaker — select a matching holder and clamping set to ensure correct seating and torque. For best results in turning steel, match feed and speed to the stability of the setup and the specific alloy; the combination of geometry and CVD-coated carbide grade supports both steady finishing passes and productive roughing when process parameters are tuned. For tailored recommendations and order placement of Tungaloy triangular turning inserts, contact Metav Werkzeuge — Metav’s consultants provide application support and can confirm holder compatibility or suggest optimal cutting data Technical data Article number: 6774013 Manufacturer SKU: TUN6774013 SKU: 6774013-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: TPMR160304 Plate size: 16 Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Geometry: triangular, 60° Hole: without hole Chipbreaker: one-sided Special features Grade/coating: T9215, CVD‑coated cemented carbide Material: carbide Recommended application: turning (external and internal) Typical use: medium steel, continuous to slightly interrupted cuts FAQ What materials is this insert designed to machine? This TPMR160304 T9215 insert is optimised for medium steel machining; the CVD‑coated carbide grade T9215 provides wear resistance and fracture protection for stable steel turning operations. How does the 0.4 mm corner radius affect the finish? The 0.4 mm corner radius produces controlled transitions and finer radii on turned parts, improving surface integrity while keeping cutting forces moderate when used in the appropriate feed range. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; select an ISO‑compatible triangular holder that matches the TPMR160304 geometry and a suitable clamp set for secure seating. Is this insert suitable for interrupted cuts? Grade T9215 is designed for continuous to slightly interrupted cuts; it combines wear resistance with sufficient fracture toughness for light interruptions, but heavy interruptions require a different approach or grade. What is the manufacturer article number and brand for ordering? The product is listed under article number 6774013 and the brand is Tungaloy; the manufacturer SKU is TUN6774013 for ordering and reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 T9225 Wendeplatten - Tungaloy
Combination of CVD-coated carbide T9225, ISO-compliant triangular geometry and a 0.4 mm corner radius delivers consistent performance for medium-to-heavy steel turning; order via Metav Werkzeuge or consult their specialists for application-specific advice. TPMR160304 T9225 Tungaloy turning insert – triangular ISO insert, 60° The TPMR160304 T9225 is an ISO-standard triangular insert for robust external and internal turning, designed for medium-to-heavy steel operations with a 0.4 mm corner radius and 11° clearance. CVD-coated carbide grade T9225 ISO triangular 60° geometry 0.4 mm corner radius for versatility One-sided chipbreaker for stable chips Reliable cutting performance under variable engagement The CVD-coated carbide composition of this grade combines hardness with toughness to withstand changing cutting conditions. As a robust universal grade, T9225 is formulated for medium-to-heavy steel turning, delivering durable edge life when intermittent cuts or variable engagement occur. The chemical vapour deposition layer improves wear resistance and reduces flank wear, which translates into longer intervals between indexings and fewer unplanned tool changes. This technical balance supports predictable cycle times and contributes to a stable machining process in small-batch and serial production alike. Seamless ISO compatibility for quick tool integration Manufactured to ISO form standards, the insert’s triangular 60° geometry, 11° clearance and precise tolerances ensure compatibility with matching ISO holders. The standardized plate format simplifies fixture selection: holders and boring bars are matched by form, free angle, tolerance class, clamping method, size and thickness, so spindle set-up is straightforward and reproducible. The insert’s 3.18 mm thickness and no-hole configuration suit many common clamping systems, while the standard dimensions reduce inventory complexity when multiple tool stations require the same insert family. Improved chip control and process security for less downtime The one-sided chipbreaker promotes controlled chip formation and evacuation, helping to maintain a consistent surface finish and reduce rework. A 0.4 mm corner radius provides versatility across finishing and light roughing passes, offering a balance between edge strength and surface quality. Combined with the T9225 grade’s toughness, this geometry reduces the risk of chipping during interrupted cuts and supports stable, repeatable machining results. The insert forms part of a complete system—ISO insert, compatible external holder or boring bar, backing/clamping kit and replacement screws—ensuring quick maintenance and minimal production interruption. For reliable medium-to-heavy turning with the Tungaloy T9225 grade, contact Metav Werkzeuge for stock availability and technical recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781036 Manufacturer SKU: TUN6781036 SKU: 6781036-Tungaloy Name: TPMR160304 T9225 Tungaloy insert Facts Size: 16 mm Thickness: 3.18 mm Clearance angle: 11° Cutting angle: 60° Corner radius: 0.4 mm Special features Material: CVD-coated carbide Grade: T9225 Shape: triangular Hole: no hole Chipbreaker: one-sided Application: Turning Typical system: ISO insert, external holder or boring bar, backing/clamping set and spare screws FAQ Which materials is this insert designed for? The TPMR160304 T9225 insert is designed primarily for medium-to-heavy steel turning, the T9225 grade offering robustness where variable engagement or interrupted cuts require increased toughness. Can the insert be used for internal turning? Yes. The insert supports both external and internal turning when mounted in a compatible ISO boring bar or holder, following the required form and clamping specifications. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this radius balances edge strength with surface finish and is suitable for light roughing through finishing passes in steel turning. Does the insert have a central mounting hole? No. The TPMR160304 comes without a hole and is intended for clamping systems that accept no-hole triangular inserts. How does the chipbreaker affect performance? The one-sided chipbreaker promotes stable chip formation and evacuation, improving surface finish and reducing the likelihood of recutting or interrupted-chip issues during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T9225, a 60° triangular geometry and a 0.4 mm nose radius to achieve stable, productive medium‑to‑heavy steel turning; order genuine parts or ask the Metav Werkzeuge consultants for application support. TPMR160304 T9225 – ISO turning insert, CVD‑coated carbide, Tungaloy A TPMR160304 T9225 indexable insert designed for medium‑to‑heavy turning operations, featuring a single‑sided chipbreaker and ISO compatibility for reliable workshop use CVD‑coated carbide grade T9225 Universal for medium–heavy steel turning 60° triangular shape, 0.4 mm nose radius Consistent cutting performance under varied conditions The combination of CVD‑coated carbide and the T9225 grade provides a robust universal solution for medium‑to‑heavy steel machining where changing engagement conditions and light interruptions demand extra toughness. The coating improves heat resistance and reduces flank wear, which translates into longer tool life and fewer indexings. As an ISO turning insert, this product supports stable machining by balancing wear resistance with ductility, making it suitable for challenging production runs without sacrificing surface finish. Reduced downtime through reliable chip control The single‑sided chipbreaker is engineered to produce predictable chip forms across a range of cutting parameters, reducing the risk of chip entanglement and tool damage. With its 0.4 mm nose radius, the insert offers a compromise between edge strength and fine surface finish; the geometry helps maintain part accuracy while permitting efficient material removal. These characteristics lead to shorter set‑up times and higher effective spindle utilisation, supporting a measurable improvement in process throughput. Quick setup and wide holder compatibility for fast changeovers ISO conformity ensures the insert fits a broad range of standard toolholders, but compatibility depends on form, 11° clearance, tolerance class, fixation and plate thickness. The 60° triangle and a 3.18 mm thickness mean the insert seats securely in standard triangular pockets; the design without a hole requires compatible clamping sets or screw styles. This system approach—indexable plate, matched external holder or boring bar, supporting shim/clamp set and replacement screws—enables rapid swaps and straightforward inventory management in production environments. Practical guidance for selecting grade and chipbreaker For stable, repeatable results, choose this grade and chipbreaker when machining steels with moderate to heavy chip loads or when cuts are slightly interrupted. If surface finish or low cutting forces are the priority, opt for a finer nose radius or different chip control geometry; if extreme hardness is present, a different grade will be preferable. The insert is suitable for both external and internal turning applications when matched to the correct holder and cutting data. For further technical clarifications or cutting parameter tables, Metav Werkzeuge provides application support via email and telephone to help align cutting data with specific machines and workpiece conditions: info@metav-werkzeuge.com, +49 2822 7131930. For tailored application advice or to procure genuine Tungaloy TPMR160304 inserts, contact Metav Werkzeuge for expert recommendations and prompt supply Technical data Article number: 6781199 Manufacturer article number: 6781199 SKU: 6781199-Tungaloy Manufacturer SKU: TUN6781199 Model series: ISO‑turning inserts Designation: TPMR160304 T9225 Tungaloy‑insert Facts Insert size: 16 mm Thickness: 3.18 mm Nose radius: 0.4 mm Clearance angle: 11° Geometry angle: 60° Hole: without hole Special features Material: carbide Coating / grade: CVD‑coated, T9225 Chipbreaker: single‑sided Plate form: triangular Typical application: external and internal turning System components: insert, external holder or boring bar, shim/clamp set, replacement screws Strengths: robust universal grade for medium‑to‑heavy steel, good performance with interrupted cuts FAQ Which materials is this insert best suited for? The TPMR160304 T9225 insert is optimised for medium‑to‑heavy steel machining and performs well under variable engagement and slightly interrupted cuts. What are the key geometric features to consider when fitting the insert? The insert uses a 60° triangular geometry, a 0.4 mm nose radius, 3.18 mm thickness and an 11° clearance; it is supplied without a fixing hole and requires a compatible clamping arrangement in the toolholder. How does the T9225 grade influence performance? T9225 is a CVD‑coated carbide grade offering a balance of wear resistance and toughness, making the TPMR160304 suitable for productive, repeatable turning of steel with good tool life. Can this insert be used for internal boring? Yes, when mounted in the appropriate boring bar with the correct seat and clamping, the TPMR160304 insert is suitable for both internal and external turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMR 160304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225 for wear resistance, a robust universal grade suited to medium-to-heavy steel turning and ISO TPMR160304 geometry for reliable holder compatibility; order directly via Metav Werkzeuge or consult our specialists for application advice. TPMR 160304 T9225 indexable insert for turning by Tungaloy The TPMR160304 T9225 is an ISO-standard triangular indexable insert for external and internal turning, engineered for medium-to-heavy steel machining with a single-sided chipbreaker for interrupted cuts. CVD-coated carbide grade T9225 Robust universal grade for steel turning ISO TPMR160304 triangular insert, 60° 0.4 mm corner radius for general finishing Single-sided chipbreaker, suitable for interrupted cuts Proven wear resistance for variable cutting conditions The insert combines a CVD-coated surface with a carbide substrate in the T9225 grade to deliver a balance of hardness and toughness. This composition improves resistance to abrasive wear while maintaining edge strength where cuts are slightly interrupted or engagement varies; the result is stable chip formation and reduced flank wear. Selecting a universal grade reduces the need for multiple grades across mixed steel batches, which supports consistent cycle times in series turning. Predictable geometry for accurate machining ISO conformity and the TPMR designation ensure that the ISO TPMR160304 geometry interfaces reliably with ISO holders. The triangular shape with a 60° included angle, 0.4 mm corner radius and 3.18 mm thickness provides a stable cutting edge for both finishing and medium-duty operations. Compatibility depends on form, relief angle 11°, tolerance class, fastening, size and thickness, so the insert is best used with matching clamping sets and holders to maintain repeatable tool setting and minimal vibration. Practical selection and system guidance The single-sided chipbreaker is designed to control chips in typical steel applications and to tolerate momentary interruptions. For optimal results, choose a chipbreaker and grade that match the workpiece material and machining stability; the machining system comprises the indexable insert, an appropriate external holder or boring bar, an underlay/clamping set and replacement screws. Proper clamping and correct seat clearance preserve the coated edge and extend service intervals. Production benefits and operational impact Using this insert reduces unexpected tool changes and helps maintain surface quality across batches, leading to fewer reworks and longer intervals between tool changes. The combination of a universal cutting grade and a CVD coating supports productivity where operation conditions vary, offering cost-effectiveness through longer life and consistent performance. For technical clarification or milling-turning process integration, the technical team is available to advise on feed, speed and holder matching. If there is uncertainty whether this insert suits a specific application, or if additional cutting data is required, our product specialists are available for guidance by email or phone; contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed recommendations. Contact Metav Werkzeuge for availability, tailored cutting data and application support for the Tungaloy TPMR160304 T9225 indexable insert. Technical data Article number: 6781076 Manufacturer SKU: TUN6781076 SKU: 6781076-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: T9225 (CVD-coated) Facts Angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 3.18 mm Plate size: 16 mm Special features Triangular plate shape Single-sided chipbreaker Without hole Designed for turning (external and internal) Robust universal grade for medium-to-heavy steel System components: insert, external holder or boring bar, underlay/clamping set, replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The Tungaloy TPMR160304 T9225 insert is designed primarily for medium-to-heavy steel machining and provides improved wear resistance for varying engagement conditions. Can the insert handle interrupted cuts? Yes, the single-sided chipbreaker and the robust T9225 grade provide sufficient toughness for slightly interrupted cuts typical in turning operations. Which holder characteristics are required for compatibility? Compatibility depends on the holder’s form, relief angle (11°), tolerance class, fastening method, size and thickness; matching these to the insert’s ISO TPMR160304 geometry ensures secure clamping and repeatable results. How does the CVD coating benefit production? The CVD-coated layer increases abrasive wear resistance and edge stability, contributing to extended tool life and more consistent surface finishes across production runs. What is included in a typical machining system for this insert? A standard system comprises the indexable insert, a suitable external holder or boring bar, an underlay/clamping set and replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compatibility, uncoated carbide cutting performance and a compact geometry for reliable turning results; secure inserts quickly through Metav Werkzeuge or consult our specialists for selection support. TPMR160304 TH10 TPMR turning insert — uncoated carbide, 0.4 mm radius by Tungaloy TPMR160304 TH10 is a precision turning insert designed for ISO‑standard holders and optimised for external and internal turning of non‑ferrous materials. ISO‑standard geometry for broad compatibility Uncoated carbide for low cutting forces One‑sided chipbreaker for cleaner surfaces 0.4 mm corner radius for fine detail Precision fit that minimises setup time and rejects The triangular ISO‑standard geometry of this indexable insert ensures repeatable seating in matching holders: form, relief angle, tolerance class, clamping and thickness determine compatibility and interchangeability. Installed correctly, the design reduces deflection and vibration, which in turn improves dimensional repeatability and reduces scrap. Where quick changeovers are required, the possibility to use multiple cutting edges per insert increases economy while maintaining consistent part quality. Sharp uncoated grade for clean finishes on non‑ferrous workpieces The TH10 grade is an uncoated cemented carbide chosen for its sharpness and low cutting resistance, especially on aluminium, brass and other non‑ferrous materials. The one‑sided chipbreaker helps form compact chips and supports an even chip flow, resulting in fewer burrs and a clean surface finish. For semi‑finish to finish passes where low cutting forces are essential, this grade reduces built‑up edge and produces predictable surface integrity with reduced secondary operations. Small radius and compact thickness for detailed turning and economical use A corner radius of 0.4 mm and plate thickness of 3.18 mm allow controlled insert engagement for fine features and narrow shoulders, while the 60° triangle offers three usable cutting corners per index. The insert is supplied without hole, simplifying some clamping systems and reducing inventory variations. Selection of the correct insert must consider holder stability and cutting parameters: a rigid setup and appropriate feed ensure the best life from the uncoated grade while preserving surface quality. For application advice or to order genuine Tungaloy TPMR160304 TH10 turning inserts, contact Metav Werkzeuge for expert selection and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6809128 Manufacturer SKU: TUN6809128 SKU: 6809128-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMR160304 TH10 Facts Insert size: 16 mm Thickness: 3.18 mm Relief angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Material: uncoated cemented carbide Grade: TH10 Chipbreaker: one-sided Plate form: triangular Hole style: without hole Application: Turning System compatibility determined by form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert best suited for? TPMR160304 TH10 turning insert (SKU 6809128-Tungaloy) is optimised for non‑ferrous materials such as aluminium and brass, where its uncoated carbide grade delivers low cutting forces and clean finishes. Can the insert be used for both external and internal turning? Yes, the triangular form and the specified dimensions make the insert suitable for both external and internal turning operations when paired with the correct ISO holder. How does the TH10 grade affect tool life and surface quality? The TH10 uncoated carbide offers a sharp cutting edge that minimises built‑up edge and cutting forces, producing a predictable surface finish; tool life depends on workpiece material, cutting data and rigidity of the setup. Which features determine whether this insert fits a holder? Compatibility is defined by geometry and tolerances: form, relief angle (11°), tolerance class, clamping style, insert size (16 mm) and thickness (3.18 mm) must match the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 NS9530 Wendeplatten - Tungaloy
Combining precise finishing performance, predictable chip control and ISO compatibility ensures reliable turning results with low cutting forces. Benefit from the uncoated cermet NS9530 grade and the triangular ISO form for efficient finishing cycles. Order the TPMR160308 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for tailored advice. TPMR 160308 NS9530 — ISO turning insert for finishing, Tungaloy TPMR160308 NS9530 is an ISO-standard triangular turning insert engineered for precision finishing in turning applications on steel. TPMR160308 ISO triangular turning insert Uncoated cermet NS9530 finishing grade Sharp edge for low cutting forces and fine finish Single-sided chipbreaker for continuous cuts High-precision finishing with low cutting forces The TPMR160308 NS9530 insert is manufactured as an uncoated cermet finishing grade specifically optimised for turning steel. The combination of a sharp cutting edge and the cermet substrate reduces friction and delivers a consistently improved surface finish, particularly in continuous cutting and small depth-of-cut operations. For production environments focused on component finish and dimensional accuracy, this finishing grade provides repeatable results and predictable tool behaviour. The result is reduced rework and a smoother handover to downstream machining or inspection. ISO compatibility for faster setup and consistent results As an ISO-standard triangular insert, the plate’s fit is governed by its shape, relief angle, tolerance class, fastening and thickness, which simplifies holder selection and changeovers. Key geometrical data such as the 11° relief angle, 3.18 mm plate thickness and 16 mm size support consistent seating and repeatable tool offsets when used with compatible external holders or boring bars. This compatibility shortens setup time, lowers the risk of assembly errors and contributes to steady process stability in repetitive turning tasks. Practical productivity: chip control and application guidance The insert features a single-sided chipbreaker, enabling stable chip formation in continuous cuts and small feed operations; this improves evacuation and reduces the chance of surface damage from erratic chips. The carbide substrate offers the rigidity required for finishing tasks, while the uncoated cermet chemistry enhances edge sharpness for low cutting forces. Selection of correct cutting parameters is essential: matching speed and feed to the NS9530 grade yields the best compromise between tool life and surface quality. For routine production, this plate is a pragmatic choice where high-quality finishes and consistent process behaviour are priorities. For application advice, availability and tailored recommendations for the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing holders and production needs Technical Data Article number: 6998630 SKU: 6998630-Tungaloy Manufacturer SKU: TUN6998630 Material: carbide Grade: NS9530 (uncoated cermet) Application: Turning Plate designation: TPMR160308 Facts Angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 16 mm Corner radius: 0.8 mm Special features ISO-standard turning insert series Triangular plate, without hole Single-sided chipbreaker Finishing grade for steel Compatible with external holders and boring bars Intended for continuous cuts and small depths Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The TPMR160308 NS9530 is a finishing-grade uncoated cermet optimised for steel machining and provides superior surface quality in continuous turning operations. How does the chipbreaker influence performance? The single-sided chipbreaker on this insert promotes stable chip control during continuous cuts, improving evacuation and helping to protect the finished surface. Which holders are compatible with this ISO plate? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation TPMR160308 facilitates selection of matching external holders or boring bars. What geometrical data are critical when setting up the tool? Important parameters include the 11° relief angle, 3.18 mm plate thickness, 16 mm size and 0.8 mm corner radius to ensure correct seating and repeatable offsets. Is the grade coated or uncoated and what does that mean for cutting parameters? The NS9530 grade is uncoated cermet, offering a very sharp edge for finishing; cutting speeds and feeds should be adjusted to exploit low cutting forces while preserving tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: one entry indicates cemented carbide while another specifies an uncoated cermet; please verify the source data to ensure accuracy and consistency across all records, as discrepancies like these can lead to confusion, errors in processing, or misinterpretation of the material specifications, which may ultimately affect decision-making, quality control, and overall operational efficiency, particularly in industries where precise material identification is critical; therefore, it is essential to cross-check the information with reliable references or consult with the relevant departments to confirm the correct classification and eliminate any ambiguity that might compromise the integrity of the data or the processes dependent on it.
TPMR 160308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm corner radius for improved surface finish and the ISO compatibility that supports reliable production planning — order directly via Metav Werkzeuge or consult the team for application assistance. TPMR 160308 T5115 — ISO turning insert for robust turning, CVD-coated carbide, triangular form (Tungaloy) TPMR160308 T5115 is an ISO indexable insert engineered for external and internal turning of cast iron, offering a balanced mix of wear resistance and edge stability in a compact triangular format. ISO triangular insert for robust turning CVD-coated carbide for cast iron 0.8 mm corner radius for fine finishes 11° relief angle; compatible with ISO holders Consistent machining performance on cast iron components The CVD-coated carbide grade T5115 is formulated as a universal solution for cast iron, delivering a balance between wear resistance and cutting-edge stability. As a result, cycle times are maintained while tool life is extended, which supports predictable production runs. The integrated one-sided chipbreaker improves chip control during both roughing and semi-finishing operations, reducing the risk of built-up edge and aiding coolant access. Explained plainly, the coating increases resistance to abrasive wear and oxidation at typical turning temperatures, while the substrate provides the toughness required when interrupted cuts or variable feed rates occur. Geometry engineered for repeatable surface quality and strength The triangular plate geometry with a 0.8 mm corner radius provides a dependable compromise between strength and surface finish; the radius reduces edge chipping risk while enabling consistent workpiece appearance. The 11° relief angle minimises flank contact and heat generation, supporting dimensional stability across longer batches. The insert’s included angle of 60° contributes to radial strength, making the geometry suited to both external turning and internal operations when paired with the correct holder. These features combine to reduce scrap rates and rework, improving overall process efficiency in precision turning applications. System compatibility and straightforward integration into existing toolsets Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation simplifies selection for standard external holders and boring bars. The plate’s 3.18 mm thickness, triangular 16 mm size and hole-free design suit many common clamping systems, enabling fast changeovers and minimal setup time. Used as part of an indexed tooling system — plate, holder, clamp and replacement screws — the configuration supports lean workflows and predictable inventory management. Selecting the appropriate chipbreaker and grade according to workpiece material and machining stability ensures optimal performance from the tool system. Economical operation and predictable process behaviour By combining a robust substrate with a protective CVD coating, the insert offers a reliable life span under typical cast iron conditions, which contributes to lower tooling cost per component. The standardised ISO format reduces the number of distinct holders required and simplifies spare-part logistics. For production environments where repeatability and uptime matter, the plate’s balanced properties assist in achieving consistent part quality with reduced intervention. Practical selection notes: match the chipbreaker and grade to the machining strategy, and verify holder compatibility by checking form, free angle, tolerance and clamping specifics. Contact Metav Werkzeuge for tailored application advice and to order genuine Tungaloy TPMR160308 T5115 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6864685 Manufacturer SKU: TUN6864685 Label: TPMR160308 T5115 Tungaloy-Wendeplatte Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° ISO designation: 160308 Special features Material: CVD-coated carbide Grade: T5115 — universal for cast iron Plate form: triangular Chipbreaker: one-sided Hole style: without hole Application: turning (external and internal) FAQ What materials is this insert intended for? The TPMR160308 T5115 insert from Tungaloy is designed primarily for cast iron applications, offering a balance of wear resistance and cutting-edge stability suited to this material class. Which holder types are compatible with the TPMR160308 geometry? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures broad compatibility with standard external holders and boring bars when these parameters match. How does the CVD coating affect tool life? The CVD-coated carbide substrate enhances resistance to abrasive wear and oxidation at elevated temperatures, which typically extends tool life and helps maintain consistent cutting performance over longer production runs. What surface finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius provides a reliable compromise between edge strength and finish quality, enabling fine surface appearances while reducing the likelihood of corner chipping during interrupted cuts. Is the insert suitable for both roughing and finishing operations? With the correct chipbreaker selection and machining parameters, the insert’s balanced properties allow effective use across roughing and semi-finishing tasks in cast iron turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm nose radius for consistent surface quality, and ISO compatibility for streamlined tool changes; order the TPMR160308 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TPMR 160308 T9215 turning insert by Tungaloy — ISO triangular indexable insert for turning TPMR 160308 T9215 is an ISO-standard triangular indexable turning insert designed for general external and internal turning in medium steel applications, offering a reliable blend of wear resistance and fracture toughness. TPMR triangular ISO turning insert CVD-coated carbide grade T9215 0.8 mm nose radius for stable finishing Single-sided chipbreaker for medium steel Optimised wear resistance for productive steel turning The insert is manufactured from cemented carbide with a CVD coating in the T9215 grade, developed as a first choice for medium steel machining. This combination provides high wear resistance while maintaining fracture safety, enabling consistently productive turning in continuous to slightly interrupted cuts. The geometry is optimised for steady metal removal, which reduces tool-change frequency and supports higher throughput in batch and series production. Where surface integrity matters, the specified edge preparation and coating help deliver repeatable finish and dimensional stability. ISO compatibility and mounting considerations for secure clamping Built to the ISO designation TPMR160308, the insert fits holders that match its form, clearance, tolerance class, clamping method, size and thickness. The insert has no central hole and uses a clamp-style or top-clamp holder compatible with triangular, 16 mm-class plates and a 3.18 mm thickness. Check the holder’s seat, clamping screw clearance and tolerance band before fitting; correct seating avoids micro-movement and preserves cutting-edge life. The 11° clearance and 60° included angle ensure predictable engagement, simplifying tool setting and reducing the need for repeated adjustments. Geometry choices that balance edge strength and surface finish With a 0.8 mm nose radius, the insert strikes a balance between edge robustness and the ability to achieve a fine surface finish on medium steels. The single-sided chipbreaker helps control swarf formation and promotes stable chip flow under steady cutting conditions; select the chipbreaker and grade to match workpiece stability and feed rate. The geometry supports both external and internal turning operations; for less stable setups choose smaller nose radii or lower feed to avoid chattering, while the current radius is well suited to general finishing and medium-duty turning. For a technically sound choice from Tungaloy for efficient medium-steel turning and fast availability, contact Metav Werkzeuge for order and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6774014 SKU: 6774014-Tungaloy Manufacturer SKU: TUN6774014 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Grade: T9215 Core Technical Data Plate designation: TPMR160308 Plate size: 16 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Clearance (rake) angle: 11° Hole: without hole Special features CVD-coated cemented carbide Single-sided chipbreaker Triangular plate form Suited for medium steel machining For continuous to slightly interrupted cuts ISO-standardised indexable insert; holder compatibility depends on form, clearance, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The TPMR160308 T9215 turning insert from Tungaloy is specified as a first choice for medium steel machining and performs best where a balance of wear resistance and fracture toughness is required. Will the insert fit my existing holder? Compatibility depends on holder seat geometry and clamping method; the TPMR160308 fits ISO triangular seats that accept a 16 mm plate, 3.18 mm thickness and top-clamp or clamp-style fixing; confirm clearance and tolerance class on the holder. Can this insert be used for interrupted cuts? Yes — the T9215 grade and the insert geometry are suitable for continuous to slightly interrupted cutting; for heavy interruptions, a more robust geometry or different grade may be preferable. Does the insert have a central hole for screw clamping? No, the TPMR160308 is supplied without a hole and requires a holder that secures the plate using a clamp or top-clamp system. What surface finish can be expected with a 0.8 mm nose radius? A 0.8 mm nose radius provides a good compromise between surface quality and edge strength, delivering consistent finishes on medium steel at moderate feed rates while maintaining tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide substrate with an ISO triangular 60° form and a 0.8 mm corner radius, this insert delivers reliable performance for medium to heavy steel turning and consistent chip control under varying engagement conditions. Order the insert directly via Metav Werkzeuge or consult the specialists for holder compatibility and application advice. TPMR 160308 T9225 ISO turning insert — triangular 60° form by Tungaloy The TPMR160308 T9225 is an ISO-standard triangular turning insert designed for external and internal turning operations, offering a robust universal grade for interrupted and heavy cuts. CVD-coated carbide grade T9225 ISO triangular insert, 60° included angle 0.8 mm corner radius for durable cutting edge Suited to medium to heavy steel turning Consistent performance for demanding steel turning The combination of a CVD-coated surface and a carbide substrate in grade T9225 provides increased toughness and wear resistance where engagement conditions vary. This makes the insert particularly valuable when interrupted cuts or unstable setups demand a balance between edge strength and fracture resistance. The ISO-standard geometry simplifies tool selection for established holders and enables predictable life cycles, so production runs benefit from repeatable tool changes and stable cutting results. Predictable chip control and reliable surface quality A 60° geometry triangular form paired with a single-sided chipbreaker gives controlled chip formation across a wide range of cutting parameters. The 0.8 mm corner radius contributes to edge strength while maintaining surface finish; operators will find that the 3.18 mm thickness supports axial stability in both external and internal turning. Explaining briefly: a chipbreaker modifies the chip flow to prevent long, tangled chips and to ease evacuation, which reduces downtime and improves productivity. Easy integration into existing tooling systems The insert is supplied in the ISO designation 160308 and is intended for use with matching external holders or boring bars together with the appropriate shim/clamp set and screws. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness — these parameters should be matched when selecting a holder. For practical selection, choose the chipbreaker and grade that correspond to the workpiece material and machine stability; this approach ensures efficient, repeatable machining and lower overall tooling costs with Tungaloy quality. Contact Metav Werkzeuge for tailored application advice on the Tungaloy TPMR160308 T9225 turning insert and current availability; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6781108 Manufacturer SKU: TUN6781108 SKU: 6781108-Tungaloy Model series: ISO turning inserts Material: carbide Core dimensions Corner radius: 0.8 mm Insert size: 16 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 11° ISO designation: 160308 Hole: without hole Features CVD-coated grade T9225 Single-sided chipbreaker Triangular insert form Suitable for external and internal turning Compatibility depends on holder form, clearance and tolerance No hole Robust universal grade for medium to heavy steel turning FAQ What materials is this insert suitable for? The Tungaloy TPMR160308 T9225 insert is optimised for medium to heavy steel turning; the CVD-coated carbide grade gives toughness for interrupted and variable cutting conditions. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; select holders specified for ISO triangular 160308 inserts and match the clamp or shim system. What corner radius and thickness does the insert offer? The insert has a 0.8 mm corner radius and a thickness of 3.18 mm, balancing edge strength and stability for consistent surface finish. Is there a mounting hole in the insert? This TPMR160308 insert is supplied without a hole and is secured using the appropriate clamp or screw system defined by the chosen holder. How does the chipbreaker affect machining? The single-sided chipbreaker controls chip flow to reduce long-chip formation and improve evacuation, contributing to safer and more productive turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide T9225 grade, a 0.8 mm corner radius and ISO conformity to secure stable performance in medium to heavy steel turning; order directly via Metav Werkzeuge or contact our consultants for selection support. TPMR 160308 T9225 — ISO triangular turning insert by Tungaloy, CVD-coated carbide, 0.8 mm radius A TPMR 160308 T9225 ISO triangular insert designed for medium to heavy turning of steel where interrupted cuts and changing engagement demand increased toughness and reliable chip control ISO triangular insert, 60° geometry CVD-coated carbide T9225 grade 0.8 mm corner radius for robustness Single-sided chipbreaker for steel turning Consistent performance in demanding steel turning This insert delivers consistent cutting under variable conditions thanks to its CVD coating and purpose-designed carbide substrate. The T9225 grade combines toughness with wear resistance, which is particularly beneficial when facing intermittent cuts or variable chip loads. The 60° triangular geometry, together with the 0.8 mm radius, increases edge strength and extends tool life in medium to heavy applications. For users less familiar with coatings: a CVD coating is applied at high temperature to form hard, adherent layers that reduce flank wear and improve resistance to built-up edge. The result is a reduction in machining interruptions and a more predictable process capability. Robustness and seamless integration into tool systems Compatibility with holders is determined by insert form, 11° clearance angle, tolerance class, clamping method, size and 3.18 mm thickness. The ISO specification of this triangular insert assures straightforward interchangeability with standard external holders and boring bars that accept the 160308 family. The insert’s single-sided chipbreaker is optimised for machining steel, promoting controlled chip formation and evacuation; this lowers the risk of entanglement and protects the workpiece surface. Because the cutting geometry and mounting interface follow ISO norms, toolroom integration and retooling cycles are simplified, supporting higher uptime and predictable set-up times. Practical selection advice and workshop benefits When selecting an insert for turning operations, prioritise the match between workpiece material and the insert grade. The presented grade is aimed at steel machining where a balance of toughness and wear resistance is required. The triangular form gives three usable edges per index, which improves cost-efficiency in many turning tasks. Note that holder compatibility must always be checked against form, free angle and thickness; the system typically comprises the ISO insert, a matching external holder or boring bar, a support shim/clamping kit and replacement screws. This modular approach facilitates rapid replacement and maintains consistent clamping security, contributing to reliable machining and repeatable part quality. For robust, ISO‑conforming steel turning select the Tungaloy TPMR 160308 T9225 insert and consult Metav Werkzeuge for application support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781155 Manufacturer SKU: TUN6781155 SKU: 6781155-Tungaloy Model series: ISO turning inserts Designation: TPMR160308 Grade: T9225 Cutting material: carbide Coating: CVD Intended application: turning Geometry: triangular, 60° angle Size: 16 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Chipbreaker: single-sided Hole style: without hole Facts Compatible with ISO 160308 holders Three indexable cutting edges (triangular form) Suitable for medium to heavy steel machining Robust against interrupted cuts Standardised dimensions for straightforward replacement Special features CVD-coated carbide substrate Universally applicable T9225 grade for varied engagement Optimised chip control for steel turning ISO conformity for system compatibility FAQ What materials is this insert best suited for? The TPMR 160308 T9225 insert is intended primarily for steel turning applications; the T9225 grade and chipbreaker are optimised for medium to heavy steel machining. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, improving surface finish and reducing the risk of chip entanglement when machining steel. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO 160308 dimensions and is compatible with holders and boring bars designed for that insert family, provided form, clearance angle, tolerance and thickness match. How many cutting edges does the triangular insert provide? The triangular geometry yields three indexable cutting edges per insert, increasing economical use during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 160308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a compact 0.8 mm corner radius to secure robust performance in medium to heavy steel turning; the ISO form and standard dimensions ensure quick integration into existing tool systems. Order the insert via Metav Werkzeuge or request application advice from our consultants. TPMR160308 T9225 triangular ISO turning insert — CVD-coated carbide, 0.8 mm radius (Tungaloy) A TPMR160308 T9225 insert engineered for ISO‑compliant external and internal turning, providing a robust universal grade for medium to heavy steel machining with reliable chip control. CVD-coated carbide grade T9225 Robust universal grade for steel Triangular ISO form, 60° cutting angle 0.8 mm corner radius, one-sided chipbreaker Consistent, high‑duty performance for challenging steel work The CVD‑coated carbide composition of this insert combines wear resistance with toughness, making it suitable for medium to heavy steel turning where engagement conditions may vary. The T9225 grade is formulated to resist flank wear and edge chipping during slightly interrupted cuts, so productivity remains high and tool life is extended. For operations targeting reliable cycle times, the coating reduces abrasion and maintains cutting geometry longer, delivering a measurable improvement in process stability. Predictable integration into ISO tool systems Designed as an ISO‑compliant triangular plate, the insert fits established holders when matched by form, clearance, tolerance class, mounting and size. The 60° form and 11° clearance angle are standard references for selecting compatible external or internal turning holders; the plate thickness of 3.18 mm and the holeless design simplify stocking and selection. Using holders with the correct seat and clamping set ensures repeatable positioning and reduces setup time for batch changeovers. Improved surface finish and chip handling under varied conditions The one‑sided chipbreaker promotes stable chip formation and evacuation during continuous and slightly interrupted cuts, which supports consistent surface quality. The 0.8 mm corner radius balances edge strength and form capability, so turned surfaces maintain dimensional integrity while the edge resists premature breakdown. Selecting the appropriate chipbreaker and grade according to workpiece material and depth of cut will enhance both finish and tool lifetime. Practical advantages for everyday workshop use As part of a system that includes a matched holder, clamp set and replacement screws, this insert offers straightforward maintenance and fast replacement routines. The triangular shape provides three usable corners, helping to reduce tooling costs per part compared with single‑edge solutions. For shops facing mixed batch sizes or intermittent engagement, the universal characteristics of the grade and the ISO form allow flexible deployment across a range of turning tasks without extensive requalification. For reliable medium‑to‑heavy steel turning, request technical advice or availability from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and integration. Technical data Article number: 6781151 Manufacturer article number: 6781151 SKU: 6781151-Tungaloy Manufacturer SKU: TUN6781151 Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 16 ISO designation: 160308 Special features Material: carbide Coating: CVD Grade: T9225 (robust universal for steel) Plate form: triangular Chipbreaker: one‑sided Hole style: without hole Application: turning (external and internal) System notes: compatibility depends on form, clearance, tolerance, mounting, size and thickness; use with matching holder, clamping set and replacement screws FAQ What materials is the TPMR160308 T9225 suitable for? The TPMR160308 T9225 insert is formulated for steel machining, specifically medium to heavy operations where toughness and wear resistance are required. How does the T9225 grade affect tool life? The T9225 CVD‑coated carbide grade improves resistance to abrasion and edge breakdown, extending tool life under variable engagement and slightly interrupted cuts. Which holders are compatible with this triangular insert? Compatibility is determined by the holder’s seat geometry, clearance angle, tolerance class, mounting and the insert’s size and thickness; use holders designed for ISO triangular inserts size 16. Does the insert have a chipbreaker and what is its benefit? Yes, the insert features a one‑sided chipbreaker, which promotes controlled chip formation and evacuation, supporting surface finish and process stability. How many cutting edges are available per insert? Being triangular, the plate provides three usable corners; careful indexing maximises economy for series production. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMR 160312 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a universal T5115 grade to achieve stable cutting-edge performance and dependable wear resistance in cast iron turning; the ISO format and defined geometry reduce setup uncertainty and support productive machining. Order inserts via Metav Werkzeuge or consult their specialists for holder compatibility and optimal chipbreaker selection. TPMR 160312 T5115 Tungaloy indexable turning insert — ISO triangular insert for turning A TPMR160312-CM T5115 indexable insert designed for ISO-compliant turning operations, optimised for external and internal turning of cast iron with a CM chipbreaker. CVD-coated carbide for wear resistance Universal grade T5115 for cast iron 60° triangular insert with 1.2 mm radius ISO-compliant, 3.18 mm plate thickness Productivity through a balanced grade and coating The combination of a CVD-coated carbide substrate and the T5115 grade delivers a balanced compromise between wear resistance and edge stability, which is particularly valuable when machining grey and nodular cast iron. This balance reduces unexpected tool changeovers and promotes predictable component quality across batch production. The CM chipbreaker helps to control chip form during interrupted or continuous cuts, contributing to shorter cycle times and improved process reliability. Defined geometry for reliable fit and surface quality ISO conformity means the insert’s compatibility with a holder is governed by its shape, relief angle, tolerance class, clamping method, size and thickness. The triangular geometry with a 60° included angle and a 1.2 mm nose radius offers a compromise between strength and surface finish; a larger radius increases edge strength for heavier cuts, while the specific 11° relief angle supports stable contact with the workpiece. Using ISO-matching clamping elements and shims keeps the cutting edge position reproducible, which is essential for repeatable tolerances in production environments. Practical application and benefits for workshop efficiency Intended for external and internal turning, this ISO insert is best paired with a suitable external holder or boring bar and the corresponding shim/clamping set and replacement screws to complete the system. As an indexable insert, it reduces downtime compared with brazed or solid tooling since edges can be rotated or replaced rapidly. The universality of the T5115 grade simplifies inventory management for mixed-cast-iron shops, while the CVD layer extends intervals between interventions — a direct contribution to lower running costs and steady output. Contact Metav Werkzeuge for expert advice on the TPMR160312-CM T5115 insert, holder compatibility and chipbreaker selection — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best solution for the application Technical data Article number: 6864686 Manufacturer SKU: TUN6864686 SKU: 6864686-Tungaloy Model series: ISO indexable turning inserts Product designation: TPMR160312-CM T5115 Facts Plate size: 16 mm Thickness: 3.18 mm Corner radius: 1.2 mm Relief angle: 11° Included angle: 60° Special features Material: carbide Coating / grade: CVD-coated, T5115 Chipbreaker: CM Plate form: triangular Hole: without hole Typical application: turning System components: ISO insert with matching holder, shim/clamping set and spare screws Suitability: cast iron machining FAQ What materials is this insert suitable for? The TPMR160312-CM T5115 insert is specified as a universal grade for cast iron, offering a mix of wear resistance and edge stability suitable for grey and nodular cast iron applications. How does the CM chipbreaker affect machining? The CM chipbreaker on this indexable insert promotes manageable chip formation and evacuation during turning of cast iron, helping to maintain surface quality and reduce the risk of chip-related interruptions. Which geometry aspects determine holder compatibility? Compatibility is determined by the insert’s shape, relief angle (11°), tolerance class, clamping style, size (16 mm) and thickness (3.18 mm); matching these parameters with an ISO-compliant holder ensures correct mounting and cutting position. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com