TPMN 160304 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, UX30 uncoated cemented carbide grade, and ISO compatibility for reliable low‑force turning and consistent chip control — order the inserts directly via Metav Werkzeuge or contact the consultants for application advice. TPMN 160304 UX30 turning insert — Tungaloy, 60° triangular geometry TPMN160304 UX30 is an ISO‑standard triangular turning insert designed for external and internal turning applications where low cutting forces and controlled chip formation are required. Sharp cutting edge for low cutting forces UX30 uncoated grade for clean chip formation ISO triangular form, 60° geometry Suitable for external and internal turning Consistent cutting performance with a sharp UX30 grade The insert offers a sharp cutting edge in the UX30 grade on an uncoated cemented carbide substrate, which is engineered to reduce cutting forces and promote reliable chip formation. A sharp edge reduces required spindle power and can improve surface quality on light to medium cuts; this is particularly valuable where minimised tool load is a priority. The carbide substrate provides the hardness and edge stability expected from modern turning inserts, making the geometry suitable for a mix of finishing and light roughing operations. ISO compatibility that simplifies tooling and setup As an ISO‑standard turning insert, the triangular form and defined geometry mean predictable mating with compatible holders. Fit depends on shape, relief angle, tolerance class, fastening method, size and thickness; the insert’s triangular shape, 16 mm size and 3.18 mm thickness support straightforward interchangeability across ISO toolholders. This compatibility reduces setup time and inventory complexity, helping maintain a smooth production flow when multiple toolholders are used on a shop floor. Geometry and application benefits for versatile turning The insert has a 60° main cutting angle with a 0.4 mm nose radius and an 11° relief angle, providing a balance between edge strength and fine contouring capability. The absence of an integrated chipbreaker means the grade and edge geometry must be matched to the workpiece and cutting parameters for optimal chip control; however, this configuration favours operations where low cutting forces and consistent chip formation are more important than aggressive chip breaking. Typical use cases include external and internal turning across a range of steels and general turning tasks where stable cutoff and predictable behaviour are required. Discuss application requirements with Metav Werkzeuge to confirm whether the UX30 grade is the best choice for a specific workpiece and secure supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6809066 Manufacturer SKU: TUN6809066 SKU: 6809066-Tungaloy Model series: ISO turning inserts Dimensions & geometry Insert size: 16 mm Thickness: 3.18 mm Nose radius: 0.4 mm Insert angle: 60° Relief angle: 11° Hole: without hole Shape: triangular Materials & grade Grade/coating: UX30, uncoated Substrate: cemented carbide Application: turning Chipbreaker: none FAQ What materials is this insert suited for? The TPMN160304 UX30 insert is intended for general turning operations; the UX30 grade and uncoated cemented carbide substrate favour applications where low cutting forces and controlled chip formation are required. Is the insert compatible with ISO toolholders? Yes — the insert follows ISO geometry standards; compatibility depends on matching shape, relief angle, fastening and thickness to the chosen holder. Does the insert include a chipbreaker? No — this insert is supplied without a chipbreaker, so chip control is achieved through grade selection and cutting parameters rather than an integrated chip‑forming groove. What cutting geometry is provided for profile accuracy? The insert features a 60° main angle and a 0.4 mm nose radius, offering a good compromise between edge strength and the ability to produce fine surface contours. Can this insert be used for both external and internal turning? Yes — the design and geometry of the triangular insert make it suitable for both external and internal turning tasks when correctly matched to the holder and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 grade, robust carbide construction and ISO compatibility for reliable turning performance; for procurement or technical advice, order via Metav Werkzeuge or consult our specialists. TPMN 160308 AH120 Tungaloy indexable insert for turning — PVD-coated carbide, 60° triangular The TPMN 160308 AH120 is an ISO‑format indexable insert intended for external and internal turning, delivering wear resistance and process stability in demanding turning operations. PVD-coated carbide for high wear resistance Triangular 60° insert with 0.8 mm corner radius ISO 160308 standard compatible insert 3.18 mm plate thickness for stable clamping Reliable wear resistance for consistent turning results The AH120 grade is a PVD-coated carbide formulated for combined wear and fracture resistance, which promotes longer edge life under intermittent and continuous cutting. As a consequence, the insert maintains a sharp cutting edge for extended periods, reducing the frequency of index changes and helping to maintain cycle times in production. The coating and substrate combination supports repeatable performance under the mechanical and thermal loads typical of turning operations, enhancing overall process stability. Precision geometry that improves machining efficiency A triangular plate with a nominal 60° included angle and a 0.8 mm corner radius gives a strong compromise between edge strength and versatility for a range of turning profiles. The 3.18 mm plate thickness and an 11° clearance angle contribute to secure clamping and controlled cutting engagement. The insert is supplied without a chipbreaker, so selection of an appropriate chip control geometry must be matched to the workpiece and cutting parameters; this flexibility benefits shops that require tailored chip formation for different materials and cycle times. Straightforward integration into ISO tool systems Belonging to the ISO series of turning inserts, the plate is designed for compatibility where form, clearance angle, tolerance class, fastening method, size and thickness match the holder. The typical system setup comprises the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws; these components together ensure reliable indexing and repeatable clamping forces. Using standardised dimensions reduces setup complexity and allows straightforward inventory management across compatible toolholders. Targeted use and operational advantages Designed specifically for turning, the insert performs well in external and internal operations where a durable edge and process reliability are priorities. The AH120 grade favours applications that demand resistance to wear and chipping while preserving dimensional accuracy and surface finish. For production environments seeking a balance of longer tool life and consistent part quality, this indexable plate provides a pragmatic solution that supports stable cycle times and predictable maintenance intervals. For application advice or to check stock and delivery options for the Tungaloy TPMN 160308 AH120 indexable insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and ordering support. Technical data Manufacturer article number: 6809067 SKU: 6809067-Tungaloy Manufacturer SKU: TUN6809067 Model series: ISO turning indexable inserts Material: Carbide Grade / coating: AH120 (PVD-coated) Core data Insert designation: TPMN160308 ISO code: 160308 Plate size: 16 mm Plate thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Corner radius: 0.8 mm Special features Plate form: triangular Hole: without hole Chipbreaker: without Typical application: turning (external and internal) System components: insert, external holder or boring bar, shim/clamp set, replacement screws Grade characteristics: wear- and fracture-resistant grade for turning with sharp edge and process security FAQ What materials is this insert suitable for? The TPMN 160308 AH120 insert is formulated as a wear‑ and fracture‑resistant PVD‑coated carbide grade for general turning tasks; the grade is chosen where a sharp cutting edge and process security are required. How does the TPMN 160308 fit into existing tooling? Compatibility is determined by ISO designation, form, clearance angle, tolerance class, fastening, size and thickness; the TPMN160308 fits holders specified for ISO 160308 inserts when those parameters match. Does the insert include a chipbreaker? This particular plate is supplied without a chipbreaker, so chip control must be managed by selecting the appropriate insert geometry or machining parameters for the workpiece and operation. What are the key dimensions to check before ordering? Verify the ISO code (160308), plate size (16 mm), plate thickness (3.18 mm), included angle (60°) and corner radius (0.8 mm) to ensure correct fit and performance with the chosen holder. Which SKU and manufacturer number should be referenced when ordering? Reference SKU 6809067‑Tungaloy or manufacturer article number 6809067 (manufacturer SKU TUN6809067) when enquiring or ordering to ensure the correct TPMN 160308 AH120 item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 NS740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a cermet NS740 grade for fine finishing and a compact 0.8 mm corner radius to improve surface finish and dimensional control in turning operations; order directly via Metav Werkzeuge or consult the technical team for application advice. TPMN 160308 NS740 — Tungaloy triangular indexable insert for turning, cermet grade, 60° TPMN 160308 NS740 is a triangular ISO indexable insert designed for finishing to light turning of steel, offering consistent surface quality and predictable wear in production and job-shop environments. Cermet grade NS740 for fine finishing ISO triangular form with 60° cutting angle 0.8 mm corner radius for accurate profiling 11° clearance and 3.18 mm plate thickness Superior finishing performance for turning operations This indexable insert combines a cermet-based cutting grade with an ISO triangular geometry to focus on surface finish and dimensional accuracy in finish and light machining of steel. The NS740 grade is oriented toward stable, even wear rather than high-volume stock removal, which helps maintain tolerances across batches. In practice, this means fewer part reworks and more repeatable outcomes when turning shafts, shoulders and profiles where surface quality and control are critical. The triangular format with a 60° cutting angle supports a range of external and internal turning setups in standard holders. Predictable tool life and consistent edge behaviour The blend of a cermet substrate and the grade-specific treatment provides predictable wear behaviour, promoting longer intervals between index changes and predictable part quality over time. The modest 0.8 mm corner radius is engineered to balance edge strength and profile fidelity, reducing the risk of scalloping while keeping cutting forces manageable. Where best results matter, operators will appreciate that the insert’s design focuses on repeatable geometry rather than aggressive material removal, enabling more stable process windows for finishing passes. Easy integration with standard ISO tool systems Compliance with ISO dimensions and the TPMN form ensures straightforward compatibility with a wide range of external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The absence of a central hole and chipbreaker simplifies clamping considerations and keeps the insert suitable for holders designed for unholed triangular inserts. This modular approach aids rapid changeover and stock standardisation across toolrooms that rely on ISO formats for efficient inventory and quick tool swaps. Practical benefits for production and job-shop use Adopting this insert supports process stability and consistent part finish without complex setup changes. The 3.18 mm plate thickness and 11° clearance reduce the risk of interference in confined setups, while the triangular shape provides three usable cutting corners per index, offering cost-effective utilisation. For applications prioritising surface quality and consistent tolerancing—such as bearing journals, stepped shafts and small-diameter profiles—the insert helps streamline finishing cycles and simplifies scrap reduction strategies. For tailored recommendations on using Tungaloy finishing inserts and to secure stock, contact Metav Werkzeuge for immediate assistance and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850521 Manufacturer SKU: TUN6850521 SKU: 6850521-Tungaloy Dimensions / Core data Size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 11° Design & features Material: cemented carbide Grade: cermet / coated cermet NS740 Shape: triangular Chipbreaker: none Hole: without hole Application: turning (external and internal) Series: ISO turning indexable inserts FAQ What types of turning is this insert best suited for? The TPMN 160308 NS740 Tungaloy indexable insert is intended for finish to light turning of steel, where surface quality and dimensional control are priorities rather than heavy stock removal. Can the insert be used in standard ISO triangular holders? Yes. The TPMN form follows ISO dimensions and is compatible with holders that match the insert’s form, clearance angle, tolerance class, clamping method, size and thickness. How does the NS740 grade affect tool life and finish? NS740 is a cermet-oriented grade focused on even wear and high surface quality; with the TPMN 160308 geometry this leads to predictable tool life during finishing passes and consistent part finish. Is a chipbreaker included and how does that influence chip control? This insert has no chipbreaker; chip control depends on cutting parameters and holder geometry. The lack of a chipbreaker simplifies clamping and is typical for inserts aimed at finishing. Which materials can be machined with this insert? The TPMN 160308 NS740 is optimised for steel machining in finishing and light-turning operations; selection of grade and cutting data should reflect workpiece material and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 NS740 Wendeplatten - Tungaloy
Combining the ISO-compliant geometry with the NS740 cermet grade delivers consistent wear and excellent surface finish for finishing and light turning of steel; the triangular 60° form and 0.8 mm corner radius enable precise dimensional control. Order the TPMN160308 NS740 indexable insert directly via Metav Werkzeuge or ask the consultants for application advice. TPMN160308 NS740 indexable insert for turning by Tungaloy TPMN160308 NS740 is an ISO-standard triangular indexable insert designed for finishing to light machining of steel, optimised for high surface quality and steady wear behaviour in precise turning operations. ISO-standard triangular insert, 60° geometry NS740 cermet for superior surface finish 0.8 mm corner radius for fine turning Compatible with ISO turning toolholders Reliable finishing and consistent component quality The NS740 grade is a cermet formulation tailored for finishing and light machining of steel, combining a hard ceramic phase with metallic binders to maintain a sharp cutting edge and reduce substrate adhesion. As an indexable insert, this component provides stable wear progression and repeatable dimensions across batches, which reduces regrinding cycles and inspection overhead. The result is improved first-pass accuracy and predictable tool-life economics when compared with standard grades. Clear compatibility and secure clamping for productive setups Compatibility with toolholders depends on the insert’s shape, clearance angle, tolerance class, clamping method, size and 3.18 mm thickness, which is consistent with ISO turning systems. The triangular, 60° geometry ensures secure seating in standard triangular pockets; the 11° clearance (free angle) supports effective chip flow and prevents rubbing on the flank. These design parameters simplify selection of a matching external holder or boring bar and reduce setup time on the shop floor. Edge geometry and machining recommendations for superior finish A 0.8 mm corner radius balances edge strength with the ability to achieve fine surface textures on turned parts. For finishing passes, reduced depths of cut and modest feed rates exploit the grade’s capabilities to deliver low roughness values and tight tolerances. The absence of an integrated chipbreaker on this insert suggests pairing with process parameters and coolant strategies that promote consistent chip formation; this approach supports stable cutting conditions and helps maintain component integrity. Productivity gains and process reliability in daily production Using an ISO-standard indexable insert with a predictable wear curve enables straightforward inventory handling and grade selection for specific operations. The triangular format gives three usable cutting corners per insert, which extends effective life per item and reduces tooling change frequency. Together with the grade’s focus on dimensional stability and surface finish, these attributes contribute to efficient, repeatable turning operations and lower overall machining costs in medium- to high-volume production. For availability and application guidance on Tungaloy’s NS740 finishing inserts, contact Metav Werkzeuge for tailored recommendations and immediate order support: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6821543 Numbers / Core technical data ISO designation: TPMN160308 Corner radius: 0.8 mm Included angle: 60° Clearance (free) angle: 11° Thickness: 3.18 mm Size: 16 Designs / Special features Triangular insert, no hole Grade: NS740 (cermet / coated cermet) Intended use: finishing to light turning of steel No integrated chipbreaker Compatible with ISO turning toolholders; holder compatibility determined by shape, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The TPMN160308 NS740 indexable insert from Tungaloy is optimised for finishing and light machining of steel, where surface quality and dimensional control are priorities. How is the insert mounted and what should be checked for compatibility? Mounting requires a matching ISO triangular pocket; compatibility is determined by the insert’s shape, clearance angle, tolerance class, clamping method, size and thickness (3.18 mm). What are the advantages of the NS740 cermet grade? NS740 delivers a sharp edge and stable wear for superior surface finish and repeatable dimensional accuracy in finishing operations. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; machining strategy and coolant selection should be used to control chip formation. How many cutting edges are available per insert and what is the corner radius? The triangular design provides three usable cutting corners and a 0.8 mm corner radius suitable for fine turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard triangular geometry, a CVD-coated carbide grade (T5115) tailored for cast iron, and precise corner control for reliable turning cycles; order genuine inserts via Metav Werkzeuge or request application advice from our consultants. TPMN 160308 T5115 Turning insert (ISO triangular) – Tungaloy TPMN 160308 T5115 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for cast iron machining and compatible with standard holders ISO triangular insert, 60° geometry CVD-coated carbide grade T5115 Optimised for cast iron machining Corner radius 0.8 mm, 3.18 mm thick Longer tool life through engineered coating and grade The CVD-coated carbide designation refers to a chemical vapour deposition layer applied to a cemented carbide substrate, which enhances wear resistance and edge toughness. This balance between hardness and toughness in the T5115 grade reduces flank and crater wear during interrupted cuts and high abrasion encountered when machining cast iron, resulting in more consistent tool life and fewer index changes. For production environments this translates into lower tool consumption and improved process reliability. Consistent surface quality from optimised geometry The insert’s triangular geometry and 60° cutting angle, combined with a corner radius of 0.8 mm and a plate thickness of 3.18 mm, deliver predictable cutting forces and chip behaviour. A defined relief angle of 11° supports secure seating in the toolholder and stable cutting under varying depths of cut. These geometric parameters help achieve repeatable surface finishes and dimensional stability on turned components, especially on external profiles and bore-facing operations. Easy integration into ISO-based turning systems As part of an ISO turning insert series, compatibility with holders depends on form, relief angle, tolerance class, clamp method, size and thickness. The insert is provided without a hole and without an integrated chipbreaker, making it suitable for holders that locate and clamp inserts by flank and edge. The standardised dimensions ensure straightforward replacement in existing tool systems, minimising setup time and inventory complexity while ensuring process continuity. Practical application advice for cast iron turning This universal T5115 grade is developed for cast iron where a compromise between abrasion resistance and edge robustness is required. When selecting a chipbreaker and adapting cutting parameters, match the insert grade and edge preparation to workpiece stability and machining strategy: choose sturdier edge forms for interrupted cuts and finer radii for finishing passes. Correct insert choice enables improved productivity and predictable tool changes, supporting efficient cycle planning in series production. For tailored selection of Tungaloy turning inserts or an expert recommendation on integrating the TPMN 160308 T5115 into existing tool systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request application support and delivery options Technical data Article number: 6862078-Tungaloy Manufacturer SKU: TUN6862078 Manufacturer article number: 6862078 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T5115, CVD-coated carbide Facts ISO designation: 160308 Size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Cutting angle: 60° Special features Triangular plate form Without hole No chipbreaker supplied Intended application: turning Optimised for cast iron machining FAQ What materials is this insert suitable for? This insert, the TPMN 160308 T5115 from Tungaloy, is optimised for machining cast iron and provides a balance of wear resistance and edge stability for that material class. Is the insert compatible with standard ISO holders? Yes, the ISO designation 160308 indicates standard dimensions; compatibility depends on holder form, relief angle, tolerance class, clamp method, size and thickness. Does the insert include a chipbreaker? The supplied variant is specified without a chipbreaker; chip control is determined by the holder and the selected chipbreaker geometry where applicable. How does the T5115 grade differ from more wear-resistant grades? T5115 offers a compromise between abrasion resistance and edge toughness for cast iron; harder, more wear-focused grades will extend life in highly abrasive conditions but may reduce edge robustness. What is the exact corner radius and thickness of the plate? The plate features a 0.8 mm corner radius and a plate thickness of 3.18 mm, suitable for a range of finishing and medium-turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 TH10 Wendeplatten - Tungaloy
Combining ISO conformity, the TH10 uncoated carbide grade and a 0.8 mm corner radius, this insert delivers low cutting forces and clean surface finishes for non‑ferrous turning; Order the TPMN160308 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed TPMN 160308 TH10 ISO turning insert for turning applications — Tungaloy, 11° relief, 0.8 mm radius The TPMN160308 TH10 is an ISO‑standard indexable turning insert designed for general external and internal turning, offering a sharp, uncoated carbide edge optimised for non‑ferrous materials ISO‑standard triangular insert, 16 mm Uncoated carbide grade TH10 for clean finishes 0.8 mm corner radius for versatile profiling 11° clearance angle and 3.18 mm thickness Consistent compatibility reduces setup time and uncertainty The ISO‑standard geometry ensures reliable fitment between insert and holder: form, clearance angle, tolerance class, attachment method, overall size and thickness determine compatibility. Using an ISO‑conforming insert minimises trial‑and‑error during changeover and reduces machine downtime. For production environments where predictable positioning and repeatability matter, the standardised specification supports quick indexing and consistent cutting lines, improving process throughput and part repeatability. Cleaner surfaces and lower cutting forces with TH10 uncoated carbide The sharp, uncoated carbide grade TH10 is selected for applications where low cutting forces and excellent surface appearance are priorities, notably on non‑ferrous workpieces. An uncoated edge can reduce built‑up edge formation on soft alloys and polymers, resulting in a cleaner finish without secondary operations. In practice, this means fewer rework cycles and more consistent dimensional quality when turning materials that typically adhere to coated edges. Versatile edge geometry for everyday turning tasks A 0.8 mm corner radius balances tool strength and profile fidelity: it supports light profiling and contouring while maintaining an edge robust enough for routine roughing. The 11° clearance angle and 3.18 mm plate thickness contribute to stable cutting behaviour, and the triangular plate shape offers multiple indexable corners for economical use. Choosing the correct holder and ensuring match to the insert geometry is essential; Metav Werkzeuge application specialists can advise on the optimal combination for specific machines and operations. For tailored application advice on the TPMN160308 TH10 insert and immediate availability contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6809072 Manufacturer SKU: TUN6809072 Label: TPMN160308 TH10 Tungaloy‑insert Facts Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 16 mm Included hole: without hole Special features Material: carbide Grade: TH10 (uncoated) Plate shape: triangular Chipbreaker: none Typical application: external and internal turning Compatible system: ISO turning insert system FAQ Is the insert suitable for both external and internal turning? The TPMN160308 TH10 insert is designed for both external and internal turning operations, providing indexable edges for versatile turning tasks. Which materials are best processed with this insert? This uncoated TH10 carbide grade is optimised for non‑ferrous materials and applications where low cutting forces and clean surfaces are required. How many cutting edges are available per insert? The triangular plate form offers three indexable corners, enabling economical edge changes and reduced tooling costs. Does the insert require a specific holder type? Compatibility depends on holder form, relief angle, tolerance class, attachment and size; matching the ISO geometry of the TPMN160308 ensures correct fit and stable cutting. Is there a chipbreaker on this grade? This insert is supplied without a chipbreaker, which is suitable for materials that form long or continuous chips; chip control should be considered at the process level. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160308 UX30 Wendeplatten - Tungaloy
High-performance triangular insert with a sharp cutting edge and UX30 uncoated carbide for low cutting forces and reliable chip formation; compatible with ISO toolholders when form, relief angle and dimensions match. Order the insert via Metav Werkzeuge or consult our technical team for selection advice. TPMN160308 UX30 ISO turning insert — Tungaloy triangular 16 mm, 11° relief The TPMN160308 UX30 is an ISO‑standard indexable insert for external and internal turning, designed to deliver low cutting forces and controllable chip formation in a compact triangular form. ISO‑standard triangular insert 16 mm UX30 carbide grade with sharp cutting edge 11° relief angle for low cutting forces 0.8 mm corner radius for versatile turning Consistent chip control and lower cutting forces for productive turning The combination of an uncoated UX30 grade and a sharp cutting geometry results in noticeably lower cutting forces and improved chip formation, which benefits stability in both roughing and finishing passes. As an ISO‑compatible turning insert, the design concentrates cutting energy through a precise cutting edge, reducing feed vibration and prolonging tool life in many setups. The result is a tangible increase in machining efficiency and fewer interrupted cycles during production. Reliable compatibility with ISO holders and fast insert exchange Compatibility with clamping systems is determined by insert form, relief angle, tolerance class, fastenings, size and thickness; this insert adheres to ISO specifications for straightforward interchange. The triangular shape (16 mm across), the 3.18 mm thickness and the 60° included angle ensure predictable seating in matching external holders and boring bars. Maintenance routines benefit from standardised geometry: spares are easier to stock and changeovers are quicker, supporting a smooth workflow in mixed‑fleet toolrooms. Application scope and machining recommendations for stable results Intended for external and internal turning, the insert performs best when low cutting forces and efficient chip control are priorities. The 0.8 mm corner radius provides a balance between edge strength and surface finish, while the absence of a dedicated chipbreaker means cutting parameters and coolant strategy should be chosen according to material and stability. Matched with the correct holder and clamping, the insert contributes to repeatable component quality and predictable process windows, reducing scrap and rework in serial production. For technical selection and availability of Tungaloy inserts, contact Metav Werkzeuge for tailored advice and regional stock information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6809074 Manufacturer SKU: TUN6809074 SKU: 6809074-Tungaloy Designation: TPMN160308 UX30 Tungaloy insert Model series: ISO turning inserts Facts Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Hole: without hole Special features Material: carbide Grade/coating: UX30 (uncoated) Shape: triangular Chipbreaker: none Typical application: external and internal turning Compatibility: ISO holder form, relief, tolerance, clamp, size, thickness FAQ Which machining operations is this insert intended for? The TPMN160308 UX30 insert from Tungaloy is intended for external and internal turning operations and is specified as an ISO‑standard turning insert. What are the key properties of the UX30 grade? The UX30 grade is an uncoated carbide developed for a sharp cutting edge, emphasising low cutting forces and controlled chip formation in turning applications. Will this insert fit an existing ISO holder? Compatibility depends on the holder matching the insert form, relief angle, tolerance class, clamping method, size and thickness; the TPMN160308 UX30 seats in holders that conform to the corresponding ISO geometry. Does the insert include a chipbreaker or central hole? The TPMN160308 UX30 is supplied without a chipbreaker and without a central hole, so chip control relies on grade, geometry and the chosen cutting parameters. What are the corner radius and relief angle of this insert? The insert features a 0.8 mm corner radius and an 11° relief angle, with an included angle of 60° and a thickness of 3.18 mm; the manufacturer article number is 6809074. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160312 NS740 Wendeplatten - Tungaloy
Benefit from a combination of advanced Cermet NS740 grade and ISO compatibility to achieve consistent surface quality and prolonged tool life; the triangular geometry with a 1.2 mm corner radius supports finishing and light turning tasks with stable wear characteristics. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPMN 160312 NS740 — Tungaloy triangular indexable insert for turning The TPMN160312 NS740 is an ISO-standard triangular indexable insert designed for turning, optimised for finishing and light machining of steel with an emphasis on surface quality and dimensional control ISO-standard triangular insert Cermet grade NS740 for finishing 1.2 mm corner radius for fine faces 11° clearance angle, 3.18 mm thickness Precision finishing for higher surface quality The triangular indexable design delivers a consistent cutting geometry that supports precision results in face and cylindrical turning operations. Manufactured in a cermet substrate and specified as NS740, this grade is developed for finishing to light machining where surface finish and dimensional accuracy are paramount. The insert’s geometry and material properties reduce tendency to built-up edge and provide a uniform wear pattern, which helps to minimise rework and inspection cycles. Material guidance and suitable applications Engineered primarily for the machining of steel, the insert’s composition and coating strategy make it particularly suited to achieving stable results during finishing passes. The NS740 sort is optimised to deliver consistent performance across common steel grades, offering predictable flank wear and good tolerance retention. For users transitioning from general-purpose grades, this insert reduces the need for repeated adjustments and supports tighter process windows during final passes. Design details that ensure compatibility and rigidity The indexable plate conforms to ISO dimensions and features a triangular insert form with a corner radius of 1.2 mm and a clearance angle of 11°, providing a balance between edge strength and the fine edge required for smooth surfaces. The 3.18 mm plate thickness and the absence of a mounting hole mean compatibility must be checked against the holder by form, free angle, tolerance class, fixation method, size and thickness. This standardised approach simplifies tool inventory management and ensures interchangeability across compliant toolholder systems. Process efficiency and lifecycle benefits Using a dedicated finishing cermet grade such as NS740 can shorten cycle times on final passes by allowing slightly increased feed or reduced pass count while maintaining surface requirements. The material’s wear characteristics promote a predictable tool life, enabling better planning of tool changes and reducing downtime. In practice, the result is a steadier production flow and a lower rate of scrapped components during final machining operations. Discuss application-specific recommendations for Tungaloy inserts with Metav Werkzeuge to ensure optimal cutting parameters and holder compatibility; contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and fast delivery Technical Data Article number: 6821544 Manufacturer SKU: TUN6821544 Model series: ISO indexable turning inserts Designation: TPMN160312 Grade: NS740 Facts Diameter / size: 16 mm Thickness: 3.18 mm Corner radius: 1.2 mm Clearance angle: 11° Included angle: 60° Special features Material: cemented carbide substrate Coating / grade: cermet / coated cermet (NS740) Insert form: triangular Application: turning (finishing to light machining) Mounting: without hole Chipformer: without FAQ What applications are best suited for this insert? The TPMN160312 NS740 insert is designed for turning applications, specifically finishing and light machining of steel where enhanced surface finish and dimensional accuracy are required. Is this insert compatible with standard ISO toolholders? Yes. The insert is ISO-standardised; compatibility depends on holder form, free angle, tolerance class, fixation method, size and thickness—ensure the holder matches the TPMN160312 dimensions. What does the NS740 grade offer compared with general-purpose grades? The NS740 cermet grade provides improved wear uniformity and superior surface quality in finishing operations compared with many general-purpose grades, helping to maintain tolerances and reduce rework. Which geometric parameters affect edge strength and finish? The 1.2 mm corner radius, 11° clearance angle and 60° included angle balance edge durability and the fine cutting edge needed for smooth surfaces, influencing both tool life and finish quality. Can the insert be used for roughing passes? This grade and geometry are targeted at finishing to light machining; for heavy roughing, a more robust grade or a different geometry is recommended to withstand higher forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160312 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 1.2 mm corner radius for stronger engagement, and an ISO‑standard triangular form for straightforward tool matching; order the insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. TPMN 160312 T5115 — TPMN indexable insert for turning, Tungaloy The TPMN160312 T5115 is a triangular ISO indexable insert for turning, designed as a universal grade for cast iron machining and supplied by Tungaloy. CVD-coated carbide T5115 Triangle ISO insert, 16 mm size 11° relief angle for stable cutting Universal grade for cast iron machining Improved wear resistance for predictable cycle times The CVD‑coated carbide grade T5115 delivers a balance between wear resistance and edge stability, which directly supports longer tool life and fewer interruptions in production. The combination of a 1.2 mm corner radius and the CVD surface layer reduces edge chipping during interrupted cuts and heavy engagement, enabling steadier material removal rates. Operators benefit from reduced regrinding frequency and more predictable tooling intervals, which supports production planning and reduces unplanned downtime. Simple integration into ISO turning tool systems This insert follows the ISO designation and a triangular geometry, so compatibility with standard external holders and boring bars is primarily determined by form, relief angle, tolerance class, clamping method, size and thickness. The TPMN160312 format (16 mm across flats, 3.18 mm thickness) fits common clamping systems; the absence of a hole and the flat underside mean a direct seat on the holder or clamp set. Specifying the correct holder and replacement screws ensures secure mounting and stable cutting conditions. Productivity advantages for cast iron applications As a universal grade for cast iron, the T5115 substrate offers good chip control and a consistent cutting edge in a range of machining conditions. While no dedicated chipbreaker is supplied in this geometry, the insert’s edge form and corner radius support controlled chip formation when paired with a matching insert seat and cutting parameters. The CVD coating adds hardness at the cutting face, improving abrasion resistance on abrasive cast iron grades and supporting higher metal removal rates where process stability permits. Practical guidance and application notes For turning operations, select the insert geometry and grade to match workpiece rigidity, machine power and feed requirements. The triangular plate provides three usable edges, increasing yield per insert. Where interrupted cuts or unstable clamping are present, consider increasing clearance or using a larger corner radius; for fine finishing, reduce feed and adjust approach angles to maintain surface quality. If compatibility or parameter selection is uncertain, discuss holder options and recommended cutting data before production to ensure optimal results. Contact Metav Werkzeuge for tailored advice on Tungaloy TPMN 160312 T5115 inserts and to arrange supply or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6862096 Manufacturer SKU: TUN6862096 SKU: 6862096-Tungaloy Model series: ISO turning indexable inserts Designation: TPMN160312 Facts Size across flats: 16 mm Plate thickness: 3.18 mm Corner radius: 1.2 mm Relief angle: 11° Included angle: 60° Special features Carbide substrate CVD-coated grade T5115 Triangular plate form No hole No chipbreaker Application: turning Designed for cast iron machining System components: holder, clamp set and replacement screws FAQ What materials is this insert suitable for? The Tungaloy TPMN160312 T5115 insert is specified as a universal grade for cast iron and is suited to external and internal turning tasks where a balanced wear resistance and edge stability are required. How many cutting edges are available per insert? The triangular geometry provides three usable cutting edges; rotating the plate to a fresh corner restores cutting performance without changing the insert type. Does the insert include a chipbreaker? This specific plate is supplied without a chipbreaker; chip control is achieved through cutting parameters and match to holder geometry for the intended cast iron application. Which holders are compatible with this ISO format? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; standard external holders and boring bars that accept TPMN‑style plates and a 3.18 mm thickness are typically suitable. What are the key dimensional specifications to check before ordering? Confirm the plate designation (TPMN 160312), plate size (16 mm), thickness (3.18 mm), corner radius (1.2 mm) and the 11° relief angle to ensure match with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 160312 UX30 Wendeplatten - Tungaloy
Take advantage of an ISO‑compatible, triangle turning insert that combines a sharp uncoated carbide cutting edge and a 1.2 mm corner radius for stable, low‑force machining; order the insert directly via Metav Werkzeuge or request guidance from our consultants. TPMN 160312 UX30 turning insert — Tungaloy (triangle, 60°) The TPMN160312 UX30 is an ISO‑standard turning insert for external and internal turning, engineered with a sharp cutting edge to favour low cutting forces and consistent chip formation. ISO triangle insert TPMN 160312 UX30 Sharp uncoated carbide cutting edge 1.2 mm corner radius for robust machining Compatible with ISO turning holders Reliable ISO compatibility for predictable setup and cycle times This triangle insert is manufactured to ISO standards, which simplifies adapter selection and reduces set‑up time across production runs. The ISO designation 160312 and standard form mean that compatibility with a holder depends on measurable parameters — form, clearance angle, tolerance class, fastening, size and thickness — enabling repeatable mounting and consistent tool geometry. In practice, this leads to fewer interruptions in the turning process and more predictable part tolerances, supporting efficient workflow in a production environment. Sharp uncoated carbide edge for efficient chip formation The UX30 grade is an uncoated carbide designed for applications where low cutting forces and good chip formation are priorities. A sharp cutting edge reduces cutting resistance and helps maintain dimensional stability on slender or low‑rigidity workpieces. Because this insert is supplied without a chipbreaker, the operator can pair it with a suitable chip control geometry for the specific workpiece material and machining parameters, thereby optimising surface finish and evacuation of swarf. Practical geometry and system integration for turning operations The insert’s triangle shape with a 60° cutting angle, 16 mm size and 3.18 mm thickness offers a balance between accessibility for internal turning and sufficient edge support for external cuts. The 1.2 mm corner radius provides robustness for intermittent cuts while still permitting good surface quality at moderate feeds. As part of an ISO insert system, the component is intended to be used with an appropriate external holder or boring bar, plus the recommended clamping set and replacement screws; matching the insert to the holder’s tolerance and clearance specification ensures secure fixation and repeatable performance. For matching holders, technical advice or to request an offer for the Tungaloy TPMN 160312 UX30 insert, contact Metav Werkzeuge and our technical consultants will assist with tool system integration and ordering Technical Data Article number: 6809081 Manufacturer SKU: TUN6809081 SKU: 6809081-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: TPMN160312 Grade: UX30 Core Data Corner radius: 1.2 mm Inscribed size: 16 mm Thickness: 3.18 mm Clearance angle: 11° Cutting angle: 60° Special features Uncoated carbide (Hartmetall) cutting material Triangle insert, 60° geometry No chipbreaker No hole Suitable for external and internal turning Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What is the primary application of this insert? The Tungaloy TPMN160312 UX30 turning insert is designed for external and internal turning operations and is part of an ISO‑standard insert family for general turning tasks. Which material or machining style suits the UX30 grade best? The UX30 grade is an uncoated carbide with a sharp cutting edge, intended where low cutting forces and good chip formation are required; the exact choice of grade and chip control should match the workpiece material and machining stability. What are the key geometric specifications of the insert? Size and geometry details: triangle form, 16 mm inscribed size, 3.18 mm thickness, 1.2 mm corner radius and 60° cutting angle (ISO designation 160312). Does the insert include a chipbreaker or central hole? This variant is supplied without a chipbreaker and without a hole; chip control is achieved by selecting a suitable chipbreaker geometry or holder combination where necessary. How is compatibility with a specific holder determined? Compatibility depends on measurable parameters: insert form, clearance (relief) angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure mounting and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 220408 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade for extended tool life, a precise 0.8 mm corner radius and ISO compatibility to keep turning operations stable and productive. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPMN 220408 AH120 Indexable Turning Insert for Turning — Tungaloy The TPMN220408 AH120 is an ISO-standard indexable insert designed for reliable external and internal turning where a sharp cutting edge and process security are required. PVD-coated carbide for wear resistance Sharp cutting edge for reliable chip formation ISO‑standard triangle insert, 22 mm across flats 11° relief angle with 0.8 mm corner radius Consistent cutting performance for production turning The TPMN220408 is manufactured to ISO dimensions, which ensures predictable seating and repeatable clamping in standard toolholders. The PVD-coated carbide grade AH120 delivers a balance between wear resistance and edge stability, reducing unexpected tool changes in high-volume turning. With a defined 11° relief angle, the insert maintains a clean shear geometry that supports consistent surface finish and lowers vibration risk during both external and internal operations. Improved uptime through a wear-resistant grade A PVD finish combined with a robust carbide substrate results in superior wear resistance and edge retention compared with uncoated grades; this directly translates into longer uninterrupted runs and fewer indexings. The cutting geometry supports stable chip formation without an integrated chipbreaker, so the choice of holder and cutting parameters becomes central to optimising chip control. For workshops seeking economic performance, the process security afforded by this grade helps reduce scrap and rework. Straightforward integration into ISO tool systems The triangular shape and 22 mm size match common ISO insert pockets; the 4.76 mm thickness and “no hole” configuration suit clamping systems that rely on precise seat contact and screw fixation. A 0.8 mm corner radius provides a robust cutting edge that tolerates moderate feed rates while preserving finishing capability. Compatibility is determined by insert form, relief, tolerance class, fixing method, size and thickness — replace or pair with the appropriate holder, underlay and clamping set for reliable results. For process-secure turning with the Tungaloy AH120 grade, contact Metav Werkzeuge for tailored advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6836843 Manufacturer SKU: TUN6836843 Product SKU: 6836843-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 0.8 mm Relief angle: 11° Thickness: 4.76 mm Size (across flats): 22 mm Insert angle: 60° Features and applications PVD-coated carbide (AH120) Triangle insert, no hole No chipbreaker integrated For external and internal turning ISO-standard indexable insert Sharp cutting edge for process security FAQ What materials is this insert suitable for? The TPMN220408 AH120 insert is a PVD-coated carbide grade engineered for general turning applications; suitability depends on the specific workpiece material and cutting data selection. How does the AH120 grade improve production? AH120 offers a wear-resistant, process-secure cutting edge that helps extend tool life and reduce unplanned interruptions during continuous turning operations. Which toolholders are compatible with this insert? Compatibility is determined by ISO form, relief angle, tolerance class, fixing method, size and thickness; select a holder that matches the ISO triangular insert pocket and clamping system. Is a chipbreaker included with the insert? This particular insert is supplied without a chipbreaker; chip control should be achieved via the holder geometry and cutting parameters. Can the insert be used for both external and internal turning? Yes, the design supports both external and internal turning when paired with the correct holder and process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 220408 NS740 Wendeplatten - Tungaloy
Benefit from a cost-effective combination of high-precision cermet cutting and consistent surface quality, with ISO compatibility that simplifies toolholder selection. Order the TPMN220408 NS740 Tungaloy insert directly via Metav Werkzeuge or request technical guidance from the consultants for optimal process integration. TPMN220408 NS740 Tungaloy – ISO triangular turning insert, 60°, cermet finishing grade TPMN220408 NS740 Tungaloy is an ISO‑standard triangular insert designed for finishing to light machining in steel turning applications, combining a cermet cutting edge with reliable dimensional stability. ISO-compliant triangular insert 60° NS740 cermet grade for fine surface finish 0.8 mm corner radius for precise edge control Without hole; standard clamp compatibility Delivering consistent surface quality for finishing operations The NS740 grade is formulated as a cermet or coated cermet optimised for finishing to light machining of steel, prioritising surface finish and dimensional accuracy over aggressive material removal. The insert’s geometry — a 60° triangular form with a 0.8 mm corner radius — supports controlled cutting engagement that reduces vibration and promotes a steady cutting edge, which in turn helps achieve repeatable part tolerances and improved cosmetic results on turned components. Process efficiency through stable wear and repeatable results Designed for consistent flank and crater wear behaviour, the NS740 grade yields predictable edge life under finishing conditions. This predictability reduces unplanned tool changes and supports planned cycle times, delivering a higher effective throughput. The combination of cermet chemistry and the insert’s precise tolerances enables operators to maintain tight machining windows and to favour fewer rework cycles, which benefits both small‑batch and series production where surface integrity matters. Clear mounting and ISO compatibility reduce setup risk Compatibility with a holder is governed by form, relief angle, tolerance class, fastening, size and thickness; the ISO designation and standardised dimensions simplify matching to widely used external holders or boring bars. The insert’s specification — triangular form, 4.76 mm thickness and absence of a centre hole — clarifies clamping requirements and reduces the potential for assembly mistakes during tool changes, helping to keep setup time and scrap rates to a minimum. Choosing NS740 cermet for steel finishing: practical guidance For applications where surface integrity and dimensional stability are decisive, the NS740 grade is a pragmatic choice. It is particularly suited to finishing passes and light turning where consistent morphology of wear and an emphasis on homogeneity of the cutting edge are required. Where higher metal removal is needed, consider switching to a roughing grade; for fine finishing, maintain stable feed and cutting speeds to exploit the cermet’s strengths and extend edge life. For reliable finishing performance with a reputable brand, request TPMN220408 NS740 Tungaloy inserts through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical integration and supply options Technical data Article number: 6821545 SKU: 6821545-Tungaloy Manufacturer SKU: TUN6821545 Model series: ISO-Drehwendeschneidplatten Facts Size: 22 mm Thickness: 4.76 mm Geometry angle: 60° Relief angle: 11° Corner radius: 0.8 mm Special features Grade: NS740 (cermet / coated cermet) Material: cemented carbide Shape: triangular Hole: without hole Chipbreaker: none Application: turning ISO series: ISO turning insert system FAQ Which materials is this insert intended for? The NS740 grade is aimed at finishing to light machining of steel; the TPMN220408 NS740 Tungaloy insert is optimised for achieving high surface quality and dimensional accuracy on steel components. How is compatibility with a toolholder determined? Compatibility is determined by form, relief (frewinkel), tolerance class, fastening, size and thickness; TPMN220408 follows ISO norms so matching to standard external holders or boring bars is straightforward. What are the key geometric specifications to consider? The insert is triangular with a 60° geometry, a 0.8 mm corner radius and a thickness of 4.76 mm, which influences allowable feeds, depths of cut and clamping method. Is the cutting material coated? The NS740 designation describes a cermet or coated cermet grade developed for finishing performance; this supports even wear and good surface results under light cutting conditions. What applications suit this insert best? TPMN220408 NS740 Tungaloy is best used for final passes in external and internal turning where surface finish and dimensional control are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 220408 T3130 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard triangular geometry, the T3130 carbide grade and the precise 0.8 mm nose radius for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. TPMN220408 T3130 indexable insert for turning — Tungaloy triangular 60° geometry A TPMN220408 T3130 indexable insert designed for ISO turning applications, offering a balanced combination of wear resistance and edge stability for external and internal turning ISO triangular insert, 60° cutting angle Tungaloy T3130 carbide grade 0.8 mm nose radius for fine profiles Compatible with standard ISO turning holders Boosted productivity through stable edge performance The triangular insert delivers reliable cutting performance thanks to the T3130 carbide grade, which combines wear resistance and toughness to extend service intervals. The geometry with a 60° cutting angle and an 11° clearance angle reduces cutting forces and improves tool life under varied cutting conditions. This results in fewer tool changes, more predictable process windows and measurable productivity gains on batch and single‑piece production alike. The technical balance between grade and geometry supports both finishing and medium cutting tasks without sacrificing surface quality. Seamless integration with ISO tool systems for flexible use Designed as an ISO‑standard indexable turning insert, the form and tolerances match a wide range of external holders and boring bars; compatibility depends on shape, clearance, tolerance class, fastening method, size and thickness. The triangular shape with a 22 mm inscribed circle and 4.76 mm thickness gives robust clamping stability, while the 0.8 mm nose radius enables controlled profile definition and repeatable dimensions. For workshops aiming to standardise tooling, this insert simplifies holder selection and minimises setup deviations across different machines. Practical selection and handling to reduce downtime Choosing the appropriate chipbreaker and grade is essential for optimised chip control and surface finish; note that this insert is supplied without a chipbreaker, so pairing with the correct cutting edge geometry is recommended for specific materials. The carbide substrate offers good cutting edge integrity, reducing the risk of chipping under interrupted cuts. For inventory planning, the manufacturer SKU and article references aid traceability and quick replacement. Regular inspection of clamping components and correct torque on fastening screws ensure consistent clamping force and safe operation. Contact Metav Werkzeuge for application advice on Tungaloy T3130 inserts — technical consultations and order support are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6856952 Manufacturer SKU: TUN6856952 SKU: 6856952-Tungaloy Facts Inscribed circle / size: 22 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 11° Cutting angle: 60° Special features Material: carbide Grade: T3130 Shape: triangular insert Hole: without hole Series: ISO indexable turning inserts Application: turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This TPMN220408 T3130 indexable insert from Tungaloy is intended for general turning; the T3130 grade provides a balanced performance across steels and a range of common engineering materials. Which tool holders fit this insert? Compatibility is determined by insert form and dimensions; the triangular ISO form and 22 mm size make the insert suitable for standard ISO triangular holders designed for 60° cutting geometry, matching typical external holders and boring bars. What is the purpose of the 0.8 mm nose radius? A 0.8 mm nose radius offers improved surface finish and dimensional control during finishing passes while still maintaining edge strength for medium cutting operations. Does the insert include a chipbreaker? The insert is supplied without a chipbreaker; chip control should be achieved by selecting a matching edge geometry or appropriate cutting parameters for the workpiece material. How can I order or get technical advice for this insert? For orders and application support regarding the TPMN220408 T3130 indexable insert by Tungaloy (SKU: 6856952-Tungaloy), please contact Metav Werkzeuge for specification guidance and availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 220408 UX30 Wendeplatten - Tungaloy
Benefit from a sharp cutting edge, precise geometry and stable chip formation for efficient turning; order the insert directly via Metav Werkzeuge or consult the advisers for holder compatibility. TPMN 220408 UX30 triangular turning insert by Tungaloy — sharp‑edge uncoated carbide for low cutting forces TPMN220408 UX30 Tungaloy insert is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a sharp edge and reliable chip control in machining operations. ISO‑standard triangular insert Sharp cutting edge for low cutting forces Suitable for external and internal turning Uncoated carbide for stable chip formation Consistent cutting with a sharp edge for lower forces and cleaner chips The combination of a sharp cutting edge and the UX30 uncoated grade gives predictable results when low cutting forces and good chip formation are priorities. This geometry reduces the mechanical load on the workpiece and toolholder, which helps to maintain dimensional accuracy during turning operations. The material is carbide, a wear‑resistant substrate engineered for cutting performance, and the insert’s sharp profile converts to lower power consumption and less heat generation at the cutting zone. For workshops pursuing steady quality and reduced rework rates, this insert supports those aims without requiring specialised cutting conditions. ISO compatibility and geometry that simplifies selection and setup Designed to the ISO turning insert standard, the geometry and designation guide holder choice: the triangular shape with a 60° included angle and the 11° relief angle determine seating and clearance, while the 0.8 mm corner radius influences the achievable surface finish and cutting robustness. Compatibility with a toolholder is defined by form, relief angle, tolerance class, fastening method, size and thickness; observing these parameters avoids assembly issues and ensures repeatable clamping. For engineers less familiar with insert nomenclature, think of the ISO code and dimensions as a mechanical passport that ensures a clean fit and consistent cutting conditions. Practical handling, quick changes and economical machining The 4.76 mm plate thickness and holeless design make handling and clamping straightforward on many standard external and internal holders. Using an ISO‑compliant insert streamlines inventory and reduces downtime through fast index changes rather than regrinding. The uncoated UX30 grade focuses on stable chip formation, which can lengthen effective tool life in appropriate feeds and speeds, and it reduces the need for complex cooling strategies in many steel and general‑purpose machining tasks. The combination of reliable geometry and grade selection supports predictable machining cycles and easier process planning. Contact Metav Werkzeuge for advice on compatible holders, matching clamps and to request original Tungaloy inserts with SKU TUN6809092 Technical Data Article number: 6809092 Manufacturer SKU: TUN6809092 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Geometry: triangular, 60° Size: 22 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Special features Grade/coating: UX30, uncoated carbide Application: turning (external and internal) Hole: without hole FAQ What turning operations suit this insert best? This insert is intended for both external and internal turning; the UX30 grade excels where low cutting forces and reliable chip formation are required. How does the corner radius affect surface finish and tool life? A 0.8 mm corner radius balances edge strength and surface quality; it helps to produce a consistent finish while offering robustness against small interruptions in cut. Is the insert compatible with standard ISO toolholders? Yes — the triangular ISO designation and dimensions allow compatibility with holders that match form, relief angle, tolerance class, fastening and plate thickness; confirm holder specifications before assembly. Why choose an uncoated UX30 grade over a coated alternative? The uncoated UX30 grade provides a very sharp cutting edge that reduces cutting forces and promotes stable chip formation in many turning tasks, which can be advantageous for particular steels and general‑purpose applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMN 220412 NS740 Wendeplatten - Tungaloy
Combining the NS740 cermet grade, precise 60° geometry and a 1.2 mm corner radius delivers consistent surface quality and predictable wear for finishing operations; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPMN220412 NS740 – triangle indexable turning insert, 60° geometry, Tungaloy The TPMN220412 NS740 is a triangle indexable insert for finishing to light turning of steel, designed for ISO-standard holders and standard turning tool systems. ISO-standard triangular insert for turning NS740 cermet grade for fine finishing 60° insert angle for versatile holder compatibility 1.2 mm corner radius for improved surface finish High-quality finish and consistent wear for finishing cuts The NS740 grade is presented as a cermet or coated cermet option intended specifically for finish to light machining of steel, with an emphasis on surface finish, dimensional accuracy and even wear. This combination means that cutting edges hold form over longer periods, which supports tighter tolerances and lowers the frequency of edge changes. The insert’s geometry focuses on delivering a smooth surface while maintaining repeatable performance in serial or batch production. Geometry and system compatibility that simplify setup With a 60° geometry and an 11° clearance angle, the insert matches common ISO triangular holder profiles and permits straightforward seat and clamp selection. Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the standardised dimensions reduce setup variables and make it easier to select an appropriate external holder or boring bar. The clear, defined geometry supports stable cutting conditions and helps to maintain consistent part quality across shifts. Tooling system and practical application advice The tool system for this insert comprises the ISO indexable insert itself, a matching external turning holder or boring bar, underlay/clamping kit and spare screws. The product is supplied without a chipbreaker, so the grade and geometry are optimised for finishing passes rather than heavy chip control. In practice, this leads to predictable, fine-chip formation under stable conditions, better surface integrity and reduced need for rework when used with suitable feeds and cutting speeds. How selection and handling improve productivity Choosing the NS740 cermet grade for finishing work on steel helps to achieve high surface quality and uniform flank wear, which translates into fewer interruptions for edge changes and higher net machining output. Correct seat condition, secure clamping and verification of insert seat tolerance are essential to exploit these benefits. For customers seeking support on cutting data or holder selection, Metav Werkzeuge’s consultants provide application-oriented guidance to match the insert to machine, material and stability parameters. For finishing-focused turning on steel, contact Metav Werkzeuge to specify the Tungaloy TPMN220412 NS740 insert and receive tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6821546 Manufacturer SKU: TUN6821546 SKU: 6821546-Tungaloy Model series: ISO turning indexable inserts Designation: TPMN220412 Numbers / Core technical data Corner radius: 1.2 mm Insert angle: 60° Clearance angle: 11° Plate thickness: 4.76 mm Plate size: 22 mm Design / Special features Shape: triangular Grade: NS740 (cermet / coated cermet) Chipbreaker: none Hole: without hole Application: turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The NS740 grade is designed for finishing to light machining of steel; the TPMN220412 NS740 insert is optimised for consistent surface finish and dimensional control on steel. Does this insert include a chipbreaker? No, the insert is supplied without a chipbreaker; the absence of a chipbreaker indicates suitability for finishing cuts under stable set-ups rather than heavy roughing operations. Which holder types are compatible with this insert? Compatibility depends on ISO-standard holder geometry—form, clearance angle, tolerance class, fastening, size and thickness determine a correct match; the 60° geometry aligns with common triangular turning holders. What are the key dimensions and geometry details? The insert has a 60° geometry, a 1.2 mm corner radius, an 11° clearance angle and a plate thickness of 4.76 mm; these parameters are given for the TPMN220412 NS740. Is the grade interchangeable with other finishing grades? The NS740 cermet grade is intended for fine finishing; interchangeability depends on workpiece material, required surface finish and process stability—consult Metav Werkzeuge for application-specific guidance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMN 220412 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of cost-effective uncoated carbide, a sharp cutting edge and ISO conformity to maintain stable, productive turning cycles; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. TPMN220412 UX30 ISO turning insert for Drehen by Tungaloy A TPMN220412 UX30 triangular ISO turning insert engineered for external and internal turning, offering a sharp uncoated carbide grade for low cutting forces and reliable chip formation ISO triangular insert, 60° geometry Uncoated carbide grade UX30 Sharp cutting edge for low cutting forces Corner radius 1.2 mm, thickness 4.76 mm Improved productivity through optimised edge geometry The insert delivers measurable gains in process efficiency thanks to its 60° geometry and sharp cutting edge, which reduce cutting forces and enable steadier tool engagement. The triangular form factor with a corner radius of 1.2 mm supports consistent dimensional control in both roughing and finishing passes. As an ISO-standard turning insert, it integrates into common holder systems where form, clearance angle and tolerance class match, helping to shorten setup time and improve machine uptime. Predictable chip behaviour for smoother machining With the UX30 uncoated carbide grade, the insert emphasises stable chip formation rather than aggressive coating effects, making it suitable where controlled chips and lower cutting forces are priorities. The absence of an integrated chipbreaker means chip control depends on cutting parameters and workpiece geometry; however, the combination of the sharp edge and the grader’s microstructure promotes predictable chips in many steels and non-hardened materials. Improved chip behaviour contributes directly to fewer interruptions and higher net productivity. Straightforward compatibility and mounting Compatibility with common toolholders is determined by insert form, clearance angle 11°, tolerance class, fastening method, size and thickness. The triangular shape and the specified plate dimensions make the insert compatible with a wide range of external holders and boring bars when the seating and clamp arrangement correspond to ISO norms. Mounting requires the appropriate clamp or backing plate and the matching fastening screw to ensure repeatable positioning and secure clamping during higher feed or interrupted cuts. Material focus and application guidance Designed primarily for conventional turning operations, the uncoated carbide composition is suited to applications where reduced cutting forces and good chip formation are required. Typical uses include external and internal turning of steels and general workshop materials where a sharp cutting edge improves surface finish and reduces power draw. When facing harder or adhesive materials, evaluate cutting data and consider an alternative grade or geometry tailored to that specific workpiece to preserve tool life and surface integrity. For original Tungaloy TPMN220412 UX30 inserts and application support, contact Metav Werkzeuge—Metav Werkzeuge can advise on holder compatibility and cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss selection and delivery Technical Data Article number: 6809100 Manufacturer SKU: TUN6809100 SKU: 6809100-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 1.2 mm Geometry angle: 60° Clearance angle: 11° Plate thickness: 4.76 mm Plate size: 22 mm Special features ISO designation: TPMN220412 Grade: UX30 (uncoated carbide) Plate shape: triangular Hole: without hole Chipbreaker: without Application: Drehen (turning) Typical use: external and internal turning Compatibility depends on form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert suited for? The Tungaloy TPMN220412 UX30 insert is intended for general turning tasks where uncoated carbide and a sharp edge promote good chip formation, commonly used on steels and comparable workshop materials. Is the insert compatible with my ISO holders? Compatibility is determined by insert form, clearance angle (11°), size and thickness; ensure the holder matches the TPMN shape and 22 mm size before assembly. Does the insert include a chipbreaker? This insert is supplied without a chipbreaker, so chip control is achieved through appropriate cutting parameters and workholding strategy. What is the corner radius and why does it matter? The corner radius is 1.2 mm, which balances edge strength and surface finish, making it suitable for medium-duty turning operations with stable contact conditions. Which SKU should be ordered for this item? Order using SKU 6809100-Tungaloy or manufacturer SKU TUN6809100 to ensure receipt of the correct TPMN220412 UX30 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade cermet that combines sharp cutting geometry and ISO compatibility for consistent surface quality and efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. TPMR 110304 NS9530 Turning indexable insert – Tungaloy The TPMR 110304 NS9530 is an ISO-format turning indexable insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and high surface finish in continuous cutting and small-depth passes. Uncoated cermet grade NS9530 Sharp edge for high surface finish Compatible with ISO turning holders 11° clearance and 0.4 mm corner radius Achieve superior surface finish with a finishing cermet This insert is a dedicated finishing solution based on the NS9530 uncoated cermet grade, engineered to deliver a high surface finish when turning steel. The combination of a sharp cutting edge and low cutting forces reduces burr formation and minimises surface irregularities, making it especially suitable for final passes and components where visual and dimensional quality are critical. For shops focused on repeatable part quality, the finishing behaviour reduces rework and polishing steps, leading to measurable productivity gains in batch production or precision component work. Consistent geometry for predictable tool performance The geometry of this triangular insert supports reliable and repeatable machining results: a 0.4 mm corner radius, 11° clearance and a 60° lead angle provide stable contact conditions and controlled chip flow. The insert thickness of 3.18 mm and the ISO designation ensure compatibility with standard ISO turning holders; fitment depends on form, clearance angle, tolerance class, fastening method, size and thickness. Clear specification of these parameters aids process planning and reduces the risk of incorrect holder selection, so changeover time and setup variance are kept to a minimum. System integration that improves throughput Integration into a full turning system — insert, external holder or boring bar, shim/clamp set and replacement screws — is straightforward thanks to the ISO format. The one-sided chipbreaker and the finishing nature of the grade are optimised for continuous turning, where consistent chip formation and low cutting forces reduce vibration and heat, extending tool life and preserving edge integrity. For production environments that prioritise surface quality and predictable cycle times, this insert supports efficient machining strategies and helps maintain stable, repeatable results across shifts. For application advice or to order the Tungaloy cermet finishing insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for immediate support and availability Technical data Article number: 6998566 Manufacturer SKU: TUN6998566 Stock SKU: 6998566-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Facts Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed circle / size: 11 mm Clearance angle: 11° Lead angle: 60° Special features Uncoated cermet, grade NS9530 Triangular insert, no hole One-sided chipbreaker Finishing grade for steel ISO-format turning insert Compatible with standard ISO external holders and boring bars Sharp cutting edge, low cutting forces Suitable for continuous turning and small depths of cut FAQ What materials is this insert suitable for? The TPMR 110304 NS9530 is a finishing-grade cermet insert intended primarily for steel machining; it delivers low cutting forces and a fine surface finish on typical steel alloys. Can the insert be used for internal turning as well as external? Yes — the ISO format and geometry of this insert support both external and internal turning when mounted in a suitable external holder or boring bar that matches the insert form and size. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker on this finishing insert promotes controlled chip formation during continuous cuts, helping to maintain a sharp edge and consistent surface quality without promoting heavy chipbreaking that would be required for roughing. What are the key geometric specifications to check before ordering? Verify the insert designation (TPMR 110304), corner radius 0.4 mm, thickness 3.18 mm, size 11 mm, clearance 11° and triangular form to ensure compatibility with the chosen holder and clamping system. Is this uncoated cermet grade better than coated carbide for finishing? For many finishing tasks on steel, the uncoated NS9530 cermet offers a sharper edge and reduced adhesion tendencies, resulting in superior surface finish at small depths of cut; coated carbides may offer better wear resistance in abrasive or interrupted conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO triangular form, uncoated cermet grade NS9530, and a 0.4 mm corner radius for reliable finishing performance in turning operations; order the TPMR110304 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPMR 110304 NS9530 Tungaloy indexable turning insert, uncoated cermet for finishing TPMR110304 NS9530 is an ISO triangular indexable insert designed for finishing turning of steel components, offering low cutting forces and high surface quality. ISO triangular insert, 11 mm inscribed circle Uncoated cermet NS9530 for fine finishing 0.4 mm corner radius for smooth surfaces Single-sided chipbreaker for continuous cuts Consistent finishing and surface quality for turned parts The TPMR110304 NS9530 insert is engineered for finishing turning where surface integrity matters. Its uncoated cermet composition provides a sharp, wear-resistant cutting edge with low affinity to build-up, which reduces friction and helps achieve consistent Ra values on steel workpieces. For workshops seeking repeatable component faces and tight tolerance control, this ISO triangular insert minimises the need for secondary grinding by delivering a superior initial finish. The low cutting forces associated with the grade support stable toolholding and reduce vibration risk during small depth-of-cut operations. Why the NS9530 cermet grade benefits finishing cycles The selected NS9530 grade is optimised for continuous cuts and small feeds typical of finishing passes. Cermet microstructure yields a fine edge that resists crater wear while maintaining sharpness, so cutting forces remain low and thermal loading is better managed than with some coated grades. For users unfamiliar with cermet: it is a cemented ceramic-metal composite that combines hardness at elevated temperatures with toughness, meaning improved surface quality and predictable tool life in light finishing tasks on steel. System compatibility and mounting guidance for secure performance The insert follows ISO standards for triangular turning plates and therefore interfaces with a wide range of ISO holders when matched by form, clearance, tolerance class, clamping and thickness. Key dimensional data—11 mm inscribed circle, 3.18 mm plate thickness, and a 11° clearance angle—determine whether a given holder or boring bar will accept the insert without modification. Selecting the correct clamping set and replacement screws ensures repeatable seating and concentricity, which are crucial to preserve the low cutting forces and surface finish advantages provided by the geometry and grade. Practical advantages and handling recommendations Operational benefits include reduced tool change frequency during finishing batches and improved first-pass quality, which together support higher throughput. The single-sided chipbreaker is designed for continuous chip formation under finishing conditions; for best results pair the insert with steady, rigid setups and moderate cutting speeds recommended for cermet grades. When inserting or indexing, inspect seating surfaces for debris and verify torque on the clamping screw to avoid micro-movement that can degrade finish. Spare inserts and proper storage further extend predictable performance across production runs. For tailored advice on Tungaloy finishing inserts and to discuss suitability for specific turning applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange fast delivery and technical consultation Technical data Article number: 6998627 SKU: 6998627-Tungaloy Manufacturer SKU: TUN6998627 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Inscribed circle: 11 mm Clearance angle: 11° Included angle: 60° Special features ISO designation: 110304 Grade: NS9530 Uncoated cermet cutting material Triangular plate, single-sided chipbreaker No hole (without centre hole) Application: turning, finishing of steel Compatible with ISO toolholders and boring bars FAQ What is the primary application of this insert? The TPMR110304 NS9530 Tungaloy indexable turning insert is intended for finishing turning of steel components where low cutting forces and high surface quality are required. Can this insert be used in standard ISO triangular holders? Yes, the TPMR110304 follows ISO triangular dimensions; compatibility depends on form, clearance, tolerance class, clamping method and plate thickness. What advantages does the NS9530 grade offer? NS9530 is an uncoated cermet grade optimised for fine finishing: it provides a sharp, wear-resistant edge, low cutting forces and improved surface finish on steel during continuous cuts. Is the insert suitable for continuous cuts and small depths of cut? Yes, the single-sided chipbreaker and the cermet grade make the insert especially suitable for continuous cutting and small feed finishing operations. Which materials is the insert designed for? The insert is designed primarily for turning steel and is optimised as a finishing grade for that material class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 T5115 Wendeplatten - Tungaloy
Combining the balanced wear resistance of the CVD-coated T5115 grade with the proven stability of an ISO triangular geometry yields consistent cutting performance in cast-iron turning; order the insert directly via Metav Werkzeuge or consult our technical team if required. TPMR 110304 T5115 – Turning insert, ISO triangular, CVD-coated carbide (Tungaloy) TPMR 110304 T5115 is an ISO triangular turning insert designed for external and internal turning of cast iron, offering a universal CVD-coated carbide grade for stable cutting and reliable edge life. CVD-coated carbide grade T5115 Universal grade optimised for cast iron Triangular ISO insert, 11 mm size 0.4 mm corner radius and 11° clearance Consistent tool life through optimised coating and grade The combination of a CVD-coated surface and the T5115 carbide formulation provides a well balanced mix of wear resistance and edge stability for cast-iron applications. This composition reduces flank wear and helps maintain cutting geometry over longer cycles, which in turn supports predictable tool change intervals and lower process costs. The single-sided chipbreaker is matched to common cast-iron chip forms, improving chip control and reducing the risk of built-up edge that can affect surface finish. Geometry and dimensions that ensure secure clamping and surface quality The triangular ISO shape with an 11 mm inscribed circle and a plate thickness of 3.18 mm gives a robust seating area for secure clamping in standard external holders and boring bars. A 0.4 mm corner radius and 11° clearance permit smooth transitions between finishing and light roughing passes while helping to damp vibration and protect the cutting edge. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening and plate thickness, so matching the insert geometry to the chosen toolholder ensures repeatable accuracy and improved surface finish. System approach and practical application guidance As part of an ISO indexable insert system, the TPMR geometry works with a matching external holder or boring bar, a suitable backing plate/clamp set and replacement screws to form a complete cutting assembly. Typical uses include external and internal turning where a universal grade for cast iron is desired; select the one-sided chipbreaker and grade according to workpiece material, machining method and assembly rigidity. The predictable behaviour of the insert reduces setup iterations and supports efficient, productive machining sequences in both single- and multi-shift production. For cast-iron turning tasks that require reliability and predictable tool life, contact Metav Werkzeuge to discuss availability and application-specific recommendations—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864717 Manufacturer SKU: TUN6864717 Internal SKU: 6864717-Tungaloy Model series: ISO turning indexable inserts Name: TPMR110304 T5115 Tungaloy insert Facts Inscribed circle / size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide Coating: CVD-coated Grade: T5115 (universal for cast iron) Plate form: triangular Hole: none Chipbreaker: one-sided Application: external and internal turning ISO standard insert FAQ What materials is this insert best suited to machine? The TPMR110304 T5115 insert is specified as a universal grade for cast iron; the T5115 CVD-coated carbide balances wear resistance and edge stability for standard cast-iron turning tasks. Which holders are compatible with this ISO triangular insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the triangular ISO geometry with 11 mm inscribed circle fits standard holders designed for that format. How does the 0.4 mm corner radius affect cutting performance? A 0.4 mm corner radius provides a compromise between cutting edge strength and surface finish, enabling smoother transitions and improved edge life in finishing and light roughing operations. Is this insert suitable for internal turning? Yes, the insert is designed for both external and internal turning applications when used with the appropriate boring bar or holder and correct assembly components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that combines high wear resistance with fracture toughness for productive medium‑steel turning; the triangular TPMR geometry with a 60° included angle and 0.4 mm corner radius delivers reliable clamping and controllable surface finish. Order via Metav Werkzeuge or consult product specialists for the optimal holder and cutting‑edge combination. TPMR 110304 T9215 ISO turning insert for medium steel turning by Tungaloy — CVD‑coated carbide, 0.4 mm radius The TPMR110304 is an ISO triangular indexable insert designed for external and internal turning of medium steels, offering a CVD‑coated carbide grade optimised for continuous to slightly interrupted cuts. CVD‑coated carbide for high wear resistance Designed for medium steel turning Triangular 60° shape for secure clamping 0.4 mm corner radius for versatile finishes Consistent productivity through a balanced carbide grade The insert’s T9215 CVD coating and base carbide substrate are intended for productive turning of medium‑hardness steels. This combination offers a balance between wear resistance and fracture toughness, so tool life remains stable under continuous or slightly interrupted cuts. For production environments seeking predictable change intervals and less frequent index changes, the engineered coating chemistry reduces flank and crater wear while maintaining cutting‑edge integrity. Geometry tailored for compatibility and secure clamping A triangular insert form with a 60° included angle and 11° relief provides mechanical stability in the seat and distributes cutting forces efficiently. The 0.4 mm corner radius gives a compromise between strength and surface finish, enabling light chamfering and consistent edge strength in general turning tasks. Compatibility with ISO toolholders is governed by form, relief angle, tolerance class, fastening and plate thickness; select a matching holder and clamping set to ensure correct seat contact and repeatable positioning. Controlled chip formation and surface result The insert is supplied with a single‑sided chipbreaker, matched to the grade for medium steel machinability. The chip control geometry reduces formation of long chips in common turning operations and supports stable material removal rates. With the moderate corner radius, the tool permits achievable surface quality without sacrificing edge life, making it suitable for semi‑finishing and general turning where consistent dimensional control and acceptable surface integrity are required. System integration and practical handling As part of an ISO insert system, the component is intended to be used with a compatible outer holder or boring bar, shim/clamp set and replacement screws. The product is supplied as a triangular indexable insert with a plate thickness of 3.18 mm and inscribed circle size 11 mm, enabling integration into standard tooling kits. Stocking this grade supports flexible process planning: choose the matching chipbreaker and holder to adapt to the workpiece stability and desired metal removal rate while keeping tooling logistics straightforward. Contact Metav Werkzeuge to discuss Tungaloy inserts and confirm the optimal TPMR 110304 setup for medium‑steel turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774061 Manufacturer SKU: TUN6774061 SKU: 6774061-Tungaloy Designation: TPMR110304 Model series: ISO turning indexable inserts Material: carbide Dimensions & core data Included angle: 60° Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 3.18 mm Inscribed circle size: 11 mm Special features Grade: T9215 (CVD‑coated carbide) Chipbreaker: single‑sided Plate form: triangular Application: turning (external and internal) Typical system: insert, outer holder/boring bar, shim/clamp, screws FAQ What materials is this insert best suited for? The TPMR110304 in T9215 is primarily intended for medium‑steel turning; the CVD coating and carbide substrate combine wear resistance and toughness suitable for continuous to slightly interrupted cuts. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm radius balances edge strength and surface finish, allowing acceptable surface quality for semi‑finishing while improving edge robustness under moderate cutting forces. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; ensure the chosen ISO holder matches the TPMR geometry and 3.18 mm plate thickness for correct seating. What chip control can be expected from the single‑sided chipbreaker? The single‑sided chipbreaker is designed to promote manageable chip formation in typical turning of medium steels, aiding stability and reducing risk of entangling long chips. Which identifier should be quoted when ordering? Quote the article number 6774061 or the manufacturer SKU TUN6774061 together with the designation TPMR110304 to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMR 110304 T9225 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide grade and a stable 60° triangular geometry ensure consistent performance during medium to heavy steel turning; added precision comes from the 0.4 mm corner radius for reliable profile control. Order the TPMR 110304 T9225 directly via Metav Werkzeuge or ask our consultants if needed. TPMR 110304 T9225 – Tungaloy indexable turning insert, triangular 60° A TPMR 110304 T9225 indexable insert for turning, engineered for medium to heavy steel machining with a CVD-coated carbide grade and ISO-compatible form CVD-coated carbide grade T9225 Triangular 60° insert, ISO format 0.4 mm corner radius for accurate profiling Single-sided chipbreaker for controlled chips Durable coating and material for steady production The combination of a CVD-coated surface and cemented carbide substrate delivers a balance of wear resistance and toughness tailored to variable cut conditions. The T9225 grade is designed as a robust universal option for medium to heavy steel machining, providing longer tool life where interrupted cuts or fluctuating engagement demands more toughness. CVD (chemical vapour deposition) creates a hard, wear-resistant layer that reduces flank wear and helps maintain dimensional accuracy over longer tool paths. As a result, process stability is improved and rework rates are reduced, supporting predictable cycle times in serial production. Geometry and micro-geometry for precision turning The triangular 60° geometry and 0.4 mm corner radius combine to produce reproducible profiles and controlled entry/exit behaviour in external and internal turning. The insert’s 11° clearance angle reduces rubbing and heat build-up at the contact zone, while the single-sided chipbreaker optimises chip formation for typical steel grades. The insert has no centre hole, which suits clamping systems for many ISO turning holders and boring bars. Compatibility with a holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; selecting matching components ensures secure clamping and repeatable positioning during index changes. Practical system advantages and application guidance Delivered as part of an ISO indexable system, the insert works with a matched external holder or boring bar plus appropriate shim/clamp sets and spare screws. Choosing the correct chipbreaker and the T9225 grade for the workpiece material minimises downtime and makes optimisation straightforward: the grade’s balanced toughness reduces the risk of chipping under variable conditions, while the CVD coating supports prolonged flank wear resistance. For workshops seeking reliable performance in mixed batch production, this configuration improves machine uptime and simplifies tool inventory management by covering a wide material range with one grade. For applications requiring reliable medium-to-heavy steel turning with the TPMR 110304 T9225 insert, contact Metav Werkzeuge for availability and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6781127 SKU: 6781127-Tungaloy Manufacturer SKU: TUN6781127 Series: ISO turning indexable inserts Core technical data Thickness: 3.18 mm Size: 11 (ISO designation) Clearance angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Grade: T9225 Coating: CVD-coated carbide Material: cemented carbide Insert shape: triangular, without hole Chipbreaker: single-sided Recommended application: external and internal turning System components: matching holder or boring bar, shim/clamp set, spare screws FAQ What workpieces is this insert suited for? The TPMR 110304 T9225 insert is designed primarily for medium to heavy steel machining and performs well where variable engagement or slightly interrupted cuts occur. How does the T9225 grade affect tool life? Tungaloy’s T9225 grade combines toughness and wear resistance; the CVD-coated carbide reduces flank wear and the grade’s toughness helps prevent chipping under fluctuating cutting conditions. Is this an ISO-compatible insert? Yes, the insert follows ISO indexable insert standards; compatibility with a specific holder depends on form, clearance angle, tolerance class, clamping method, size and thickness. Can the insert be used for finishing passes? With a 0.4 mm corner radius and a 60° geometry, the insert supports controlled profile accuracy and can be used for many finishing operations in turning, depending on surface finish requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD coating, a universal T9225 grade and precise 0.4 mm corner geometry for reliable medium-to-heavy steel turning; order the TPMR110304 insert directly via Metav Werkzeuge or ask the consultants for application advice. TPMR110304 T9225 TPMR triangular turning insert — CVD-coated carbide, 0.4 mm radius (Tungaloy) The TPMR110304 T9225 is a triangular ISO indexable turning plate designed for medium to heavy steel turning, offering a stable chip formation solution for variable engagement conditions. Triangular ISO form, 60° cutting angle CVD-coated cemented carbide grade T9225 Corner radius 0.4 mm for consistent finishes Single-sided chipbreaker, thickness 3.18 mm Consistent wear resistance for demanding turning tasks The combination of CVD-coated cemented carbide and the T9225 grade delivers wear resistance with preserved toughness, which is essential when machining a range of steels under changing engagement. The chemical vapour deposition coating increases surface hardness and thermal stability, reducing flank wear and preserving cutting-edge geometry over longer cycles. For users unfamiliar with coatings: a CVD coating deposits a hard layer that protects the substrate and delays abrasion, so cycle-to-cycle repeatability improves and regrind or insert changes occur less frequently. Controlled chip flow and surface quality with minimal intervention A defined corner radius of 0.4 mm together with the single-sided chipbreaker produces predictable chip shapes and consistent surface finish in external and internal turning. The chipbreaker helps break and evacuate chips without aggressive feed changes, which lowers the risk of chip entanglement and reduces operator intervention. In practice this means fewer stoppages for clearing chips and more parts produced per shift, translating into higher process efficiency without sacrificing dimensional quality. Easy integration into ISO tooling systems for faster setup As an ISO indexable turning plate, the insert fits the standard holder geometries when matched for form, relief angle and thickness. The plate features an 11° relief angle, a 60° cutting geometry and a plate thickness of 3.18 mm, so selecting a compatible external holder or boring bar is straightforward for established ISO systems. The triangular form and the absence of a centre hole simplify clamping options where a screwless or edge-clamped solution is used, enabling quick changeover and reproducible positioning in series production. Economic versatility for mixed-batch and interrupted cuts The robust universal grade is formulated to cope with light interruptions and variable cutting conditions often encountered in mixed-batch production. This adaptability reduces the need for multiple specialised grades and thus lowers tooling inventory and handling complexity. The result is an economical balance between tool life and cutting performance, while retaining the ability to achieve consistent component quality. For practical selection, pair the plate’s specifications with holder stability and chosen feeds to exploit the grade’s strength in real shop-floor conditions. For tailored tool selection based on the Tungaloy T9225 grade, contact Metav Werkzeuge for expert application advice and availability via info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical data Article number: 6781143 SKU: 6781143-Tungaloy Manufacturer SKU: TUN6781143 Model series: ISO indexable turning plates ISO designation: TPMR110304 Facts Plate size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Cutting angle: 60° Grade: T9225 Cutting material type: CVD-coated cemented carbide Special features Triangular plate form Single-sided chipbreaker Without centre hole Application: Turning Robust universal grade for medium–heavy steel machining Compatibility depends on holder form, relief, tolerance class and thickness FAQ What materials is this insert suitable for? The TPMR110304 T9225 insert is optimised for steel in medium to heavy turning; the T9225 grade balances wear resistance and toughness for variable engagement. How does the chipbreaker affect machining? The single-sided chipbreaker on this indexable plate controls chip form and evacuation, improving surface finish and reducing the need for manual chip clearing during production. Which holder features must be matched for compatibility? Compatibility requires matching the plate form, relief angle (11°), size, thickness (3.18 mm) and clamping method to the chosen external holder or boring bar. Is the coating suitable for continuous high-speed turning? The CVD coating enhances thermal and abrasive wear resistance, making the plate appropriate for higher cutting speeds within the T9225 grade’s recommended parameters for steel turning. Can the insert handle light interruptions? Yes, the robust universal grade was selected to tolerate light interrupted cuts and variable entry conditions while maintaining tool life and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110304 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide substrate and the T9225 universal grade delivers dependable cutting performance and extended tool life for medium to heavy steel turning; excellent chip control and a compact 0.4 mm corner radius support stable, repeatable results. Order the TPMR110304 T9225 insert directly via Metav Werkzeuge or ask the consultants if assistance is required. TPMR 110304 T9225 Turning Insert — Tungaloy — CVD-coated carbide, 11° relief The TPMR110304 T9225 is an ISO-standard indexable turning insert designed for robust external and internal turning of steel, offering a balanced combination of toughness and wear resistance for interrupted or variable engagement conditions. CVD-coated carbide for long tool life Robust T9225 grade for medium–heavy steel ISO triangular shape for wide compatibility 0.4 mm corner radius for stable edges Consistent performance where cutting conditions vary The CVD-coated carbide substrate combined with the T9225 grade is optimised for medium to heavy steel machining, providing increased resistance to abrasive wear while retaining toughness for intermittent cuts. This balance reduces unexpected tool changes and supports a steady production rhythm. The coating acts as a thermal and chemical barrier, slowing flank wear and preserving edge geometry for longer intervals between indexing or replacement. Simple integration into ISO tool systems for flexible setups Compatibility is ensured by ISO standardisation: form, tolerance class, size and thickness determine fitment in a matching external holder or bar. The 11° relief and triangular plate geometry allow reliable clamping and repeatable orientation across holders, while the nominal plate thickness of 3.18 mm and standard dimensions simplify inventory management. Where toolholders and clamp kits are already ISO-compliant, retrofitting this insert is straightforward and predictable. Improved chip control and process stability A single-sided chipbreaker tailored to the plate geometry promotes predictable chip formation and evacuation during turning. The modest 0.4 mm corner radius contributes to a stronger cutting edge and reduces vibration risk at higher feeds, enhancing surface finish consistency. For operations with variable engagement or light interruptions, these characteristics help maintain machining stability and minimise scrap rates. Application guidance for material selection and cutting strategy Optimised for steel machining, the insert performs reliably across a range of steels under varied cutting conditions; select feeds and depths of cut that match fixture rigidity and toolholder stability to exploit the T9225 grade’s toughness. For fine finishing use slightly higher speeds with conservative feeds to leverage the coating’s wear protection; for heavier stock removal, prioritise clamping stiffness and incremental depth to preserve edge life. The insert’s universal characteristics make it a practical choice for mixed production environments. For production lines seeking a robust, versatile indexable insert, contact Metav Werkzeuge for the Tungaloy T9225 grade and tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930, and secure the TPMR110304 for improved process reliability. Technical data Article number: 6781178 SKU: 6781178-Tungaloy Manufacturer SKU: TUN6781178 Model series: ISO turning indexable inserts Grade: T9225 Material: Carbide Facts Plate size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: no hole Special features CVD coating Single-sided chipbreaker Triangular plate form ISO-standardised insert Application: turning (external and internal) Robust universal grade for medium–heavy steel FAQ What applications is this insert suitable for? The TPMR110304 T9225 insert is intended for external and internal turning of steel, particularly where medium to heavy cuts or variable engagement occur. How does the T9225 grade affect tool life? The T9225 grade provides a balance of toughness and wear resistance; combined with the CVD coating on the TPMR110304, this extends usable edge life under mixed cutting conditions. Can this insert be used in existing ISO holders? Yes. The insert follows ISO dimensions and clamping interfaces, enabling straightforward integration into compatible external holders or bars. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius enhances edge strength and helps dampen vibration, improving stability and surface finish during moderate to heavy turning operations. Is the chipbreaker suitable for automated productions? The single-sided chipbreaker supports predictable chip formation, aiding evacuation and repeatable cycle times in automated turning setups when combined with appropriate cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 110308 NS9530 Wendeplatten - Tungaloy
The combination of a sharp NS9530 cermet grade, a 60° triangular geometry and a 0.8 mm corner radius delivers consistently high surface quality and low cutting forces for fine finishing turning operations; order the insert via Metav Werkzeuge or consult the team for application advice. TPMR110308 NS9530 ISO turning insert, cermet, 60° – Tungaloy The TPMR110308 NS9530 is an ISO-format triangular turning insert engineered for fine finishing in external and internal turning, offering a sharp uncoated cermet edge for continuous cuts. Cermet grade NS9530 for fine finishing 60° triangular geometry for versatile turning Sharp cutting edge with low cutting forces 0.8 mm corner radius for consistent finish High-quality surface finish with low cutting forces The uncoated cermet grade NS9530 is designed for finishing passes where a smooth surface and low cutting resistance are priorities. Its sharp cutting edge reduces ploughing and heat generation, which helps to achieve improved surface roughness on steels during light, continuous cuts. By using a finishing-specific grade, the tool minimises rework and supports stable interchangeability between inserts, resulting in predictable results when small depth-of-cut settings are required. The emphasis on edge integrity and low forces supports quieter machining and longer tool life under recommended conditions. Reliable ISO geometry for straightforward holder compatibility Built to ISO standards, the insert’s 60° triangular form and 3.18 mm plate thickness ensure compatibility with a wide range of external holders and toolposts when form, clearance angle, tolerance class, clamping and size are matched. The 11° clearance angle and triangular shape facilitate positive seating in standard indexable holders, while the 0.8 mm corner radius provides a balance between edge strength and fine-detail turning. Because compatibility depends on multiple parameters, the standardised geometry simplifies tool inventory and replacement planning for production and maintenance teams. Application guidance for efficient finishing operations This insert is optimised for turning of steels in finishing operations and is particularly effective with continuous cutting and small feeds. The single-sided chipbreaker design supports predictable chip formation for light passes; selecting the appropriate chipbreaker and grade for material and stability will maximise productivity. For best results, pair the insert with a rigid clamping system and adjust cutting parameters to maintain low cutting forces and steady surface quality. If machining strategy requires different engagement or interrupted cuts, choose a matching chipbreaker and verify holder compatibility before production. For specific application advice on integrating the Tungaloy TPMR110308 NS9530 into existing turning processes or to check availability via Metav Werkzeuge, contact the Metav Werkzeuge team for tailored recommendations and ordering support. Technical data Article number: 6998628 Manufacturer SKU: TUN6998628 Market SKU: 6998628-Tungaloy ISO designation: TPMR110308 NS9530 Facts Geometry angle: 60° Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 3.18 mm Size: 11 Special features Uncoated cermet grade NS9530 Triangular plate form Single-sided chipbreaker Without hole ISO-series turning inserts Intended use: turning (external and internal) FAQ What materials is this insert best suited for? The NS9530 cermet grade is optimised for finishing on steels; the TPMR110308 insert delivers low cutting forces and a fine surface finish when used for continuous finishing cuts on steel components. Can the insert be used for internal turning as well as external turning? Yes, the triangular ISO form and 60° geometry make the insert suitable for both external and internal turning when paired with a compatible holder that matches the insert’s size, thickness and clamping method. How should the corner radius be selected for finishing operations? A 0.8 mm corner radius provides a compromise between edge strength and surface quality for finishing; for finer profiles or smaller radii, a different insert geometry with a smaller corner radius may be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com