TPGT 16T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet NS9530 and stable ISO geometry for consistent finishing results; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPGT 16T308 NS9530 — TPGT16T308 Tungaloy turning insert (Finishing, ISO) TPGT16T308 NS9530 is a triangular ISO indexable insert for precision turning, optimised as a finishing grade for Stahl with a sharp cutting edge and low cutting forces ISO‑standard triangular insert 16 mm Uncoated cermet grade NS9530 for finishing Sharp edge with low cutting forces and high finish Cylindrical hole with single‑side countersink Precision finishing for demanding turning operations The insert is an ISO‑standardised triangular indexable insert designed for high‑quality finishing passes. Built from cemented carbide and specified as an uncoated cermet NS9530, the geometry and material pairing produce a sharp cutting edge and low cutting forces, which together minimise tool deflection and enhance dimensional control during continuous cuts and light depths of cut. The result is a consistent surface integrity with reduced need for rework. Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness, which ensures predictable seating and repeatable performance when the correct holder is selected. Stable geometry and secure seating for reliable tool life The triangular form with an included angle of 60°, a corner radius of 0.8 mm and a relief angle of 11° provides a robust cutting geometry that supports the finishing application. A cylindrical hole with a single‑side countersink (40°–60°) and a plate thickness of 3.97 mm give stable clamping and repeatable position accuracy in the pocket. The one‑sided chipbreaker is matched to the grade for controlled chip formation during finishing passes, reducing vibration and improving surface finish. Because the grade is uncoated, wear behaviour is highly predictable under light finishing conditions, making it a suitable choice for consistent, high‑quality results on Stahl. Application guidance and system considerations Intended primarily for external and internal turning, this insert performs best in finishing applications where small feed rates and shallow cuts are used. Select the corresponding holder, clamp set and fastening screws that match the insert form, tolerance class and thickness to ensure full ISO compatibility. Where high surface quality and low cutting forces are priorities, the NS9530 cermet offers a balance of wear resistance and edge sharpness. If there is any uncertainty about holder selection, cutting data or chipbreaker choice, technical advisors can clarify the correct combination of insert grade and tool system to suit the component and machining conditions. Contact Metav Werkzeuge for tailored application advice and to order original Tungaloy TPGT16T308 NS9530 inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997965 Manufacturer SKU: TUN6997965 Item SKU: 6997965-Tungaloy ISO designation: TPGT16T308 Core dimensions Size: 16 mm Thickness: 3.97 mm Relief angle: 11° Included angle: 60° Corner radius: 0.8 mm Materials & features Material: cemented carbide Grade: uncoated cermet NS9530 Application: turning (finishing) on Stahl Chipbreaker: one‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Plate form: triangular Compatibility: ISO‑standard insert — check holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The TPGT16T308 NS9530 insert is specified as a finishing grade for Stahl, offering a sharp edge and controlled wear suited to fine finishing passes. Is the insert coated or uncoated? This insert uses an uncoated cermet NS9530 grade, which provides a sharp cutting edge and predictable wear behaviour for finishing applications. Which toolholders are compatible with this insert? Compatibility depends on the holder’s pocket form, relief angle, tolerance class, fastening method, size and plate thickness. Use a holder designed for ISO TPGT inserts and verify the pocket matches the TPGT16T308 dimensions. How does the corner radius affect the machining result? The 0.8 mm corner radius balances edge strength and surface finish; it helps reduce chatter while delivering the improved surface quality expected from finishing inserts. What is the purpose of the countersunk hole? The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and correct seating in the pocket, aiding repeatability and positional stability of the indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 16T308 NS9530 Wendeplatten - Tungaloy
Combining a sharp-edge NS9530 grade with precise 60° geometry and a 0.8 mm corner radius ensures excellent surface finish and stable performance in finishing turning operations; order the insert directly via Metav Werkzeuge or consult the technical advisors for tailored holder recommendations. TPGT16T308 NS9530 — Tungaloy indexable insert for turning, finishing grade, 60° A TPGT16T308 NS9530 ISO-format insert engineered for finishing turns on steel, offering a sharp cutting edge, low cutting forces and controlled chip formation for continuous cuts. ISO 16T308 geometry, 60° included angle Uncoated cermet NS9530 for fine finishing Cylindrical hole with single-sided countersink 0.8 mm corner radius for small depth cuts Achieve superior surface finish with a finishing-grade cermet The uncoated cermet grade NS9530 combines a fine-grained ceramic matrix with metallic binder phases to maintain a very sharp cutting edge. This material choice reduces built-up edge and lowers cutting forces, which translates to consistently improved surface quality on steel during finish turning. For applications with small depths of cut and continuous cutting, the insert significantly reduces the need for manual rework while supporting tighter dimensional tolerances. The result is reliable, repeatable finishing performance suited to precision components. Reliable geometry and secure mounting for stable machining Designed with a 60° included angle and an 11° clearance at the cutting face, the insert offers predictable engagement and reduced radial forces. The triangular form with a cylindrical hole and single-sided countersink (40°–60°) enables positive location and secure clamping in compatible ISO holders. Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO series system requires a matching outer holder or boring bar, a suitable shim or clamp set and replacement screws for safe assembly. This systematic approach minimises vibration and ensures repeatable positioning. Practical benefits in process and tool management With a 0.8 mm corner radius the insert is ideal for finishing passes and small feed conditions where edge strength and surface integrity matter. The single-sided chipbreaker supports effective chip control in fine-turning regimes, reducing the risk of surface damage and improving cycle stability. The insert’s geometry and cermet composition favour continuous cuts and low-feed finishing, making it a practical choice for shop floors seeking consistent part quality without complex parameter tuning. Selecting the right grade and integrating into workflows As part of an ISO indexable insert system, this turning insert is intended to be used with holders specified for triangular inserts of 16 mm size. The TPGT16T308 variant combines the finishing-focused NS9530 grade with a 3.97 mm thickness to balance rigidity and cutting access on turned parts. For new setups, select a holder and clamping kit that match the insert’s form and thickness; for existing fixtures, verify tolerance class and fastening compatibility. Where tool life and surface finish are priorities, the finishing cermet helps to extend effective process windows and reduce secondary operations. For precision finishing with Tungaloy NS9530, contact Metav Werkzeuge for availability and specific holder recommendations to ensure optimal integration into the production process Technical data Article number: 6997990 Manufacturer SKU: TUN6997990 SKU: 6997990-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Key specifications Insert size: 16 mm Thickness: 3.97 mm Included angle: 60° Clearance angle: 11° Corner radius: 0.8 mm Special features Triangular insert form Cylindrical hole + single-sided countersink (40°–60°) One-sided chipbreaker Uncoated cermet grade NS9530 For turning; ISO indexable insert series Compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The NS9530 finishing grade is optimised for steel; the Tungaloy TPGT16T308 insert gives a sharp edge and low cutting forces suited to fine finishing on steel workpieces. How does the uncoated cermet grade compare to coated carbide for finishing? Uncoated cermet like NS9530 maintains a sharper edge and lowers cutting forces compared with many coated carbides, making it preferable for final passes where surface finish is critical on steel. Which holder features must be checked for compatibility? Compatibility requires a holder matching the insert’s triangular form, 3.97 mm thickness, relief/clearance angle and fastening style; verify tolerance class and clamp fit before assembly with the TPGT16T308 insert. What cutting conditions suit this insert best? The insert excels in low-depth, continuous finishing cuts and small feed rates where its 0.8 mm corner radius and chip control deliver consistent surface quality. Is the chip control handled by the insert geometry or coating? Chip control is delivered by the one-sided chipbreaker geometry; NS9530 is uncoated, so chip behaviour relies on the insert form and cutting parameters rather than a coating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 16T308 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, a low‑force TH10 uncoated carbide grade and a 60° triangular geometry for consistent finishing and efficient chip control; order directly via Metav Werkzeuge or consult our specialists for application guidance. TPGT 16T308 TH10 ISO triangular indexable turning insert — uncoated carbide, 60° — Tungaloy TPGT 16T308 TH10 is an ISO‑standard triangular indexable insert for turning, engineered for low cutting forces and clean surfaces in non‑ferrous applications ISO 60° triangular geometry Uncoated carbide TH10 grade 0.8 mm corner radius for fine finishing Single‑sided chipbreaker with centre hole Optimised cutting performance for non‑ferrous turning The uncoated carbide TH10 grade delivers a low‑force cutting edge that reduces power draw and supports cleaner surface finishes when machining non‑ferrous materials. Combined with the ISO 60° triangular form and a 0.8 mm corner radius, this insert enables predictable tool engagement and stable cutting for both light profiling and finishing passes. The sharp, universal edge geometry is tuned to lower cutting resistance rather than aggressive material removal, which improves tool life under the right cutting conditions and helps maintain consistent dimensional results on shafts and bore faces. Secure clamping and broad holder compatibility Compatibility with a toolholder is determined by exact geometry: form, relief angle (11°), tolerance class, fastening, size and thickness. The insert’s with‑hole design and cylindrical hole plus a one‑sided countersink (40°–60°) provide secure positive locking in standard ISO triangular holders, while the plate thickness of 3.97 mm and 16 mm inscribed circle ensure a snug fit in matched clamping systems. Specifying the correct holder and clamp ensures repeatable seating and torque transmission, which in turn preserves the insert's edge integrity and supports reliable production sequences. Practical use cases and chip control Designed primarily for external and internal turning, the indexable plate with a single‑sided chipbreaker gives dependable chip formation for many non‑ferrous machining tasks; examples include aluminium alloys and brass where low cutting forces and good surface finish are priorities. The combination of sharp geometry and chipbreaker design reduces built‑up edge and promotes continuous chips that are easier to handle. For mixed production runs, selecting the TH10 grade and the one‑sided breaker minimises process variation and supports faster set‑ups with predictable outcomes. Care, selection and process tips When selecting this triangular indexable insert, match the TH10 grade and breaker to the workpiece material and machining stability rather than defaulting to coated grades. The uncoated edge benefits light to medium feed finishing and situations where cutting‑force reduction improves fixture life. For best results, pair the plate with a holder specified for 60° triangular inserts and verify clamping hardware suits the plate’s hole and countersink style. If vibration or heavy interrupted cuts are expected, review the holder rigidity and consider alternative grades optimised for higher toughness. For application advice, availability and tailored recommendations for Tungaloy TH10 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on the ideal holder and process settings Technical data Article number: 6808982 Manufacturer SKU: TUN6808982 SKU: 6808982-Tungaloy Series: ISO indexable turning inserts Material: Carbide (uncoated) Designation: TPGT16T308 Core dimensions Inscribed circle / size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief (clearance) angle: 11° Included angle: 60° Special features Grade: TH10 (uncoated carbide) Plate shape: triangular Chipbreaker: single‑sided Hole: with hole, cylindrical hole + one‑sided countersink (40°–60°) Typical application: external and internal turning Compatibility: ISO‑standard insert seat and clamping systems FAQ Is the insert suitable for aluminium and other non‑ferrous materials? Yes. The Tungaloy TPGT16T308 TH10 insert is a sharp universal grade designed for non‑ferrous materials, making it well suited to aluminium and brass when low cutting forces and good surface finish are required. Does the insert have a coating? No. The insert is made from uncoated carbide (TH10), offering a sharp cutting edge and reduced cutting forces compared with many coated grades. What geometry and dimensions should the holder match? Match the holder to the insert’s 60° triangular geometry, 16 mm inscribed circle, 3.97 mm thickness and 11° relief angle; the hole and countersink style require a corresponding clamping design for secure fixation. What kind of chip control can be expected? The single‑sided chipbreaker provides controlled chip formation for typical non‑ferrous turning tasks, promoting continuous, manageable chips and aiding surface quality. Is this insert intended for finishing or roughing operations? This uncoated TH10 grade is optimised for finishing and light to medium cutting where low cutting forces and a clean surface are priorities; for heavy roughing consider a different grade designed for toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 16T308 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp UX30 grade, robust triangular geometry and precise 60° approach to achieve stable chip formation and low cutting forces in turning operations; order the insert via Metav Werkzeuge or consult our tooling specialists for integration advice. TPGT16T308 UX30 Tungaloy turning insert (TPGT, 16T308, turning) TPGT16T308 UX30 is an ISO‑standard triangular turning insert intended for both external and internal turning, offering a sharp uncoated carbide grade for reduced cutting forces and controlled chip formation ISO‑standard triangular insert, 60° geometry Sharp uncoated carbide grade UX30 for low cutting forces 0.8 mm corner radius for versatile turning Cylindrical hole with single‑side 40°–60° countersink Consistent performance where low cutting forces matter The TPGT16T308 insert combines the UX30 uncoated carbide grade with a triangular 60° geometry to deliver consistent cutting behaviour when low forces and clean chip formation are priorities. The uncoated carbide composition reduces the tendency for built‑up edge in certain steels and non‑ferrous materials, which helps to stabilise machining performance over repeated passes. This results in fewer interruptions, more predictable cycle times and improved component consistency for production runs that demand repeatability. Geometry and chip control for reliable turning A 0.8 mm corner radius paired with a single‑sided chipbreaker provides a balance between strength at the cutting edge and the ability to form controllable chips in a range of turning conditions. The triangular shape with 60° approach promotes secure seating in standard holders and offers three usable cutting edges per index, increasing tool utilisation. For jobs where chip evacuation and surface finish are important, the insert’s geometry helps maintain a steady metal removal process and reduces secondary operations. Material suitability and recommended uses Designed principally for turning, the insert is suitable for operations that prioritise low cutting forces and reliable chip formation. The UX30 grade is an uncoated cemented carbide formulated for sharp cutting edges and is particularly effective in applications with moderate rigidity where reduced cutting forces minimise vibration and improve surface integrity. Select the grade and chipbreaker to match the workpiece material and the desired balance between edge life and surface quality. System compatibility and mounting considerations The insert is an ISO‑standard type and compatibility with a holder depends on form, clearance angle, tolerance class, attachment, size and thickness. The part features a cylindrical hole with a single‑side countersink (40°–60°) for secure fastening, a plate thickness of 3.97 mm and a nominal size of 16. These characteristics support straightforward integration into common external holders and boring bars; ensure holder geometry matches the insert’s seating and clamping requirements to preserve repeatable cutting performance. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to discuss availability—email info@metav-werkzeuge.com or call +49 2822 7131930 for guidance on holder compatibility and process optimisation. Technical Data Article number: 6808983 Manufacturer SKU: TUN6808983 Our SKU: 6808983-Tungaloy Model series: ISO turning inserts Material: uncoated carbide Facts Geometry: 60° Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 16 Clearance angle: 11° Special features Triangular plate form Single‑sided chipbreaker UX30 grade, sharp cutting edge Cylindrical hole with single‑side 40°–60° countersink Intended use: turning (external and internal) ISO‑standard insert—compatibility depends on holder form and tolerance FAQ What work is this insert designed for? The TPGT16T308 UX30 insert is designed for turning operations, including both external and internal turning, where low cutting forces and controlled chip formation are required. Which materials work best with this grade? The UX30 uncoated carbide grade is effective in applications requiring a sharp cutting edge; it performs well in a range of steels and non‑ferrous materials when low cutting forces are beneficial. How is the insert fixed in the holder? This insert features a cylindrical hole with a single‑side countersink (40°–60°) and requires a compatible ISO‑type holder that matches the form, thickness and tolerance class for secure clamping. What are the key dimensions to check for compatibility? Check the plate size (16), plate thickness (3.97 mm), corner radius (0.8 mm) and the 60° geometry to ensure the holder seats the insert correctly and maintains the intended clearance angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 080202 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, extended tool life and ISO compatibility for high-speed turning with minimal tool changes. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGW 080202 DX140 – Turning indexable insert by Tungaloy (PCD, ISO 080202, for turning) The TPGW080202-DIA DX140 is a triangular ISO indexable insert designed for high-speed external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials, offering a robust chipbreaker and a carbide substrate for stable machining. PCD grade DX140 for aluminium and non-ferrous ISO 080202 triangular insert, 60° included angle Very long tool life at high cutting speeds Cylindrical hole with single-side countersink Increase throughput with sustained high-speed turning The use of polycrystalline diamond (PCD) in the DX140 grade enables substantially higher cutting speeds on soft and abrasive non‑ferrous materials compared with conventional carbide inserts. This material pairing reduces tool wear and the frequency of changeovers, delivering measurable productivity gains and a lower cost per part in continuous production. The long tool life of the PCD tip supports longer uninterrupted cycles and fewer process interruptions, which is a direct advantage for throughput-led operations. Consistent surface quality through controlled chip formation A precisely engineered DIA chipbreaker ensures predictable chip control and consistent surface finish on profiles and cylinders. The PCD cutting edge keeps its geometry for extended periods, which preserves dimensional accuracy over long runs. Where repeatability and surface integrity matter, the DX140 grade maintains form accuracy while reducing secondary operations, such as polishing or reworking, thereby streamlining downstream processes. Secure clamping and geometry for repeatable results The triangular shape with a 60° included angle, a 0.2 mm nose radius and an 11° relief angle provides a balance between edge strength and fine cutting capability. The insert’s cylindrical hole with single‑side countersink (40°–60°) improves seat stability and torque transmission when mounted in a matching holder, reducing micro‑movement and vibration. Compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness, so correct system selection guarantees reproducible results. Simple integration into ISO tool systems and easy maintenance As part of an ISO‑standard insert system, the plate integrates with a wide range of external holders, shims and clamping sets. Replacement screws and underlays are standard components, allowing quick swaps on the shop floor and minimising downtime. The carbide substrate provides a firm base for the PCD layer, giving a robust combination that is suitable for both demanding single‑piece and batch production environments. The manufacturer’s system advice helps to match chipbreaker and grade to workpiece material and machine stability. For high‑speed turning with extended tool life, contact Metav Werkzeuge for tailored advice or to request samples of the Tungaloy DX140 indexable insert—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821537 SKU: 6821537-Tungaloy Model series: ISO indexable turning inserts Designation: TPGW080202-DIA DX140 Facts Included angle: 60° Nose radius: 0.2 mm Relief angle: 11° Thickness: 2.38 mm Size: 08 Special features Cutting material: polycrystalline diamond (PCD) — DX140 Substrate: carbide Chipbreaker: DIA Hole: cylindrical + single‑side countersink 40°–60° Shape: triangular Application: turning; suited to aluminium, non‑ferrous and abrasive non‑metallics FAQ What materials is this insert best suited for? The DX140 PCD grade is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials; the TPGW080202‑DIA insert retains edge life under these conditions. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for positive seating; correct clamping parts and a matching holder form ensure stable fixation and repeatable positioning. What is the purpose of the DIA chipbreaker? The DIA chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement during high‑speed turning. Can the insert be used for internal as well as external turning? Yes, the ISO triangular design and PCD cutting edge make it suitable for both external and internal turning where geometry and holder access permit. Which product reference should be quoted when ordering? Please quote the designation TPGW080202‑DIA DX140 or SKU 6821537‑Tungaloy to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 080204 DX140 Wendeplatten - Tungaloy
Benefit from the combination of high cutting performance, extended tool life and precise ISO geometry to keep turning cycles efficient and predictable. Order the TPGW080204 DX140 insert directly via Metav Werkzeuge or consult our advisers for holder compatibility and grade selection. TPGW080204 DX140 – Tungaloy ISO turning insert, PCD grade for high‑speed aluminium turning The TPGW080204 DX140 is a 60° triangular ISO turning insert designed for high‑speed machining of aluminium and other non‑ferrous and abrasive non‑metal materials, combining a polycrystalline diamond cutting layer with a carbide substrate for stable cutting performance. PCD cutting material for abrasive non‑ferrous alloys Long service life and high cutting speeds ISO triangular 60° form with 0.4 mm radius Cylindrical hole with one‑sided countersink Higher productivity through PCD: faster cuts and far fewer tool changes The use of polycrystalline diamond (PCD) as the cutting material gives a decisive productivity advantage when machining aluminium and abrasive non‑metals. PCD retains a keen edge at elevated cutting speeds, which means longer uninterrupted runs and fewer index changes. With a carbide substrate beneath the diamond layer, the insert delivers the rigidity required for stable turning, reducing cycle times while maintaining consistent dimensional accuracy and surface quality. Predictable clamp security and precise geometry for repeatable results The ISO‑standard triangular geometry with a 60° included angle and a 0.4 mm corner radius ensures reliable positioning in standard holders. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) provides secure clamping and precise seating in most ISO‑compatible toolholders and boring bars. The 11° relief angle and 2.38 mm thickness contribute to contact stability; these measurable parameters simplify setup and reduce the risk of unexpected vibration or misalignment during turning. Match grade and chipbreaker to the workpiece for best results Selecting the right chipbreaker and the DX140 grade is essential for optimised results: the chipformer and grade should be chosen according to the workpiece material, the machining operation and the stiffness of the setup. A correctly matched chipbreaker improves swarf control and helps achieve consistent surface finish with fewer interruptions. The DX140 grade is configured for high cutting speeds and long life when machining non‑ferrous alloys and abrasive compounds, supporting lower overall tooling cost per component. Practical system notes and workshop integration for dependable use This insert is supplied as part of an ISO insert system: the complete setup comprises the triangular indexable insert, a matching external holder or boring bar, the appropriate shim/clamp set and replacement fastening screws. Compatibility is defined by insert form, relief angle, tolerance class, clamping type, size and thickness; verifying these parameters before purchase avoids installation delays. For workshop integration, the carbide substrate and PCD layer reduce the frequency of regrinding and extend productive tool life, supporting predictable maintenance intervals and lower overall process disruption. Contact Metav Werkzeuge for tailored advice on Tungaloy PCD inserts, assistance with holder compatibility and to request sample cutting data for the DX140 grade. Technical data Article number: 6821538 SKU: 6821538-Tungaloy Manufacturer SKU: TUN6821538 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Size: 08 ISO designation: 080204 Thickness: 2.38 mm Relief angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Cutting material: polycrystalline diamond (PCD) Substrate: carbide Grade: DX140 Chipbreaker: DIA Hole: cylindrical hole with one‑sided countersink (40°–60°) Shape: triangular Application: turning (external and internal) System components: compatible holder, shim/clamp set, replacement screw FAQ Which materials is this insert best suited for? The TPGW080204 DX140 insert is designed for aluminium, non‑ferrous alloys and abrasive non‑metal materials where PCD offers superior wear resistance and surface finish. Why choose a PCD cutting material over conventional carbide? PCD provides a much harder cutting edge for non‑ferrous and abrasive workpieces; the DX140 grade combines PCD with a carbide substrate to deliver both edge life and the rigidity required for stable turning. How does the insert secure in the holder? A cylindrical hole with a one‑sided countersink (40°–60°) and ISO triangular form ensure consistent seating and secure clamping in compatible holders and boring bars. Can this insert be used for both external and internal turning? Yes, the geometry and hole style make the insert suitable for both external and internal turning when paired with the correct external holder or boring bar. How to determine the correct chipbreaker and grade for a job? Choose the chipbreaker and grade according to the workpiece material, cutting operation and machine/fixture stability; for tailored recommendations, consult Metav Werkzeuge or refer to cutting data for the DX140 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 090202 BX360 Wendeplatten - Tungaloy
Benefit from the combination of CBN wear resistance, ISO compatibility and a compact 0.2 mm corner radius for consistent finishing of hardened components; order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility. TPGW 090202 BX360 Tungaloy turning insert The TPGW 090202 BX360 is an ISO‑standard triangular indexable insert designed for precision external and internal turning of hardened steels and similar high‑hardness materials. CBN grade BX360 for high wear resistance ISO TPGW090202 triangular geometry 11° clearance angle for stable cutting 0.2 mm corner radius for fine surface quality Longer runtimes through CBN technology The BX360 grade uses CBN (cubic boron nitride) to deliver markedly higher wear resistance compared with conventional carbide grades when machining hardened steels. This results in a more stable cutting edge during long finishing passes and fewer indexings per workpiece, which improves throughput and reduces unplanned tool changes. The material behaviour of CBN at elevated temperatures enables predictable tool life in wear‑intensive tasks, making the insert especially suited to demanding end‑machining operations where surface integrity and dimensional stability matter. Predictable mounting and repeatable results The insert conforms to ISO geometry and its triangular form with 60° included angle ensures a standardised interface to compatible holders. Compatibility to a particular clamping system is determined by form, 11° clearance angle, tolerance class, fastening method, size and thickness, so selecting the correct external holder or boring bar is essential for repeatable results. The presence of a cylindrical hole with a single‑side countersink (40°–60°) provides secure seating under a clamp or screw, delivering consistent cutting conditions and reliable batch‑to‑batch performance. Practical handling and application guidance The plate is supplied without a chipbreaker, offering a smooth cutting edge for fine finishing; the 0.2 mm corner radius and 2.38 mm thickness support precise surface generation and controlled cutting forces. Typical applications include external and internal turning of hardened steels, and certain executions of this grade may be suitable for cast iron depending on the workpiece and process parameters. For installation, use the correct underlay, clamp set and replacement screws as part of the system assembly; this ensures the mechanical seating and torque are correct and helps to maintain repeatable tool life and surface quality. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CBN inserts and a compatibility check with existing holders Technical Data Article number: 6808989 Manufacturer SKU: TUN6808989 Stock SKU: 6808989-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Cutting material: CBN (BX360) Substrate: carbide Plate form: triangular Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: none Application: turning (external and internal) System: ISO‑standard insert requiring compatible holder, underlay, clamp set and replacement screws FAQ Is this insert suitable for hardened steels? The TPGW 090202 BX360 insert is specifically designed for hardened steels, where the CBN BX360 grade provides superior wear resistance for finishing and light roughing applications. Can the insert be used for internal turning as well as external turning? Yes, the TPGW 090202 BX360 is applicable to both external and internal turning when paired with the correct holder and clamping parts, enabling stable cutting conditions for internal bores and faces. Does this insert include a chipbreaker? No, the supplied TPGW 090202 BX360 insert comes without a chipbreaker, offering a polished cutting edge for fine surface finishes; users should select cutting parameters and an appropriate holder to manage chip evacuation. What does the plate hole specification mean for mounting? The insert features a cylindrical hole with a single‑side countersink (40°–60°), providing positive seating under a screw or clamp and ensuring repeatable location when installed in a compatible ISO holder. How does the 0.2 mm corner radius influence surface finish? A 0.2 mm corner radius balances edge strength and surface generation, allowing fine finishes on hardened components while limiting cutting forces; it is suitable for final passes where dimensional accuracy and surface quality are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090202 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of polycrystalline diamond (PCD) cutting performance, ISO compatibility and a compact geometry for productive aluminium turning; the insert delivers high cutting speeds and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for selection and tooling integration. TPGW 090202 DX120 — Indexable turning insert for turning, polycrystalline diamond by Tungaloy A TPGW 090202 DX120 indexable insert for precision turning of aluminium and non-ferrous materials, featuring a triangular form, 0.2 mm corner radius and a PCD cutting grade optimised for high-speed machining PCD grade DX120 for high speeds ISO‑standard triangular insert 09 size 11° clearance for secure cutting Cylindrical hole with countersink 40°–60° Faster cycles and fewer tool changes with PCD technology The use of polycrystalline diamond (PCD) in the DX120 grade enables reliably high cutting speeds and markedly long tool life when machining aluminium and other non-ferrous or abrasive non-metals. PCD offers a wear mechanism and edge hardness that reduce adhesion and built-up edge on soft, gummy alloys; the result is shorter cycle times and reduced post-process cleaning. For production environments this translates into measurable productivity gains and lower tooling consumption without compromising surface quality or dimensional accuracy. Predictable fit and straightforward replacement for continuous production As an ISO‑standard insert, the geometry and tolerance set of this triangular turning plate ensure clear compatibility with matching holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, allowing repeatable seating and reliable clamping forces. The standardised interfaces make inventory management simpler and cut machine downtime during index changes, supporting continuous operation and consistent component quality. Practical integration into tooling systems and application guidance The insert’s triangular shape offers multiple usable edges, while the corner radius 0.2 mm is suited to fine finishing and light profile turning tasks. The plate is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for secure fastening; the nominal thickness is 2.38 mm and the standard 09 size fits common ISO turning holders. Because this grade is supplied without a chipbreaker, selection of an appropriate chip control geometry or stable clamping strategy should be matched to the workpiece, machining parameters and rigidity to ensure optimal swarf management and surface finish. For high‑speed aluminium turning with PCD, contact Metav Werkzeuge for tailored tooling recommendations and availability — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the TPGW 090202 DX120 and compatible holders Technical data Manufacturer article number: 6808987 SKU: 6808987-Tungaloy Manufacturer SKU: TUN6808987 Article name: TPGW090202 DX120 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Facts Angle: 60° Corner radius: 0.2 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Cutting material: Polycrystalline diamond (PCD), grade DX120 Application: Turning (external and internal) Insert form: Triangular Hole style: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: none System components: ISO insert, matching external holder or boring bar, shim/locking set and spare screws Compatibility note: Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The DX120 PCD grade is optimised for aluminium, non‑ferrous alloys and abrasive non‑metallic materials; the TPGW 090202 DX120 insert from Tungaloy performs particularly well at elevated cutting speeds in these materials. Is the insert compatible with standard ISO turning holders? Yes — the insert follows ISO standards and compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness; ensure the holder matches the TPGW 090202 geometry. What is the corner radius and how does it affect machining? The insert has a 0.2 mm corner radius, which is suitable for fine finishing and light profiling; a smaller radius supports better surface finish but requires stable cutting conditions. Does the plate include a chipbreaker? This plate is supplied without a chipbreaker, so chip control should be achieved through selection of appropriate cutting parameters or a compatible holder/auxiliary chip control solution when using the TPGW 090202 DX120. Which SKU identifies this article for ordering? The article is listed under SKU 6808987-Tungaloy and manufacturer article number 6808987, referenced as TUN6808987 in manufacturer stock systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 090202 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of a PCD cutting grade for high-speed aluminium turning, a compact triangular geometry and a reliable clamping interface to reduce tool changes and increase throughput. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGW090202 DX140 — Tungaloy ISO triangular PCD turning insert for turning A TPGW090202 DX140 ISO-format triangular turning insert engineered for high-speed machining of aluminium, non-ferrous and abrasive non-metals. PCD grade DX140 for aluminium machining Triangular 60° geometry for stable turning 0.2 mm corner radius for fine finishes Compatible with ISO turning holders High-speed machining with fewer tool changes The insert combines a polycystalline diamond (PCD) cutting material in grade DX140 with an ISO triangular form to enable high cutting speeds and long tool life when machining aluminium and similar alloys. The PCD microstructure is optimised for abrasive, non-ferrous materials, which results in reduced flank wear and a lower replacement frequency. This technical advantage leads to measurable improvements in uptime and a lower cost per finished part, particularly in high-volume external and internal turning operations. Geometry designed for consistent surface quality The triangular 60° geometry and a precisely formed 0.2 mm corner radius deliver repeatable engagement and a controlled cutting edge, which supports consistent surface finish and dimensional stability. With a plate thickness of 2.38 mm, the insert provides sufficient bulk for secure clamping while maintaining the small edge condition needed for fine finishing work. The insert is supplied without an integrated chipbreaker, which is appropriate for many aluminium applications where chip form is managed by geometry and cutting parameters. System compatibility and secure clamping The product is part of an ISO insert system and is intended to be used with a suitable external holder or boring bar, together with a matching shim or clamping set and replacement screws. Compatibility with a holder is determined by the insert form, clearance angle, tolerance class, method of fixation, size and thickness. The plate is supplied with a cylindrical hole plus a single-side countersink (40°–60°), facilitating accurate location and a secure clamp when mounted in standard ISO toolholders. Application range and process benefits Designed for turning, this insert is particularly suited to aluminium, non-ferrous metals and abrasive non-metals, where PCD cutting edges offer superior wear resistance and consistent edge integrity. The combination of material and geometry supports stable cutting conditions, shortened setup intervals and predictable tool life. For production environments prioritising throughput and surface quality, the result is a more reliable machining process and reduced secondary finishing. For personalised application advice or supply of Tungaloy PCD inserts contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for tailored recommendations and availability Technical data Article number: 6808988 SKU: 6808988-Tungaloy Manufacturer SKU: TUN6808988 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Cutting material type: polycrystalline diamond (PCD) Grade / sort: DX140 Application: Drehen Core specifications Geometry: 60° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 09 ISO designation: 090202 Hole: with hole Design & special features Triangular plate shape Cylindrical hole + single-side countersink (40°–60°) No chipbreaker PCD grade DX140 for aluminium and non-ferrous applications Compatible with ISO turning holders FAQ What materials is this insert suitable for? The TPGW090202 DX140 insert is intended for aluminium, non-ferrous metals and abrasive non-metals; the DX140 PCD grade is optimised for long life under these conditions. Is the insert compatible with standard ISO turning holders? Yes. The insert follows ISO form and is compatible when the holder matches form, clearance angle, tolerance class, fixation method, size and thickness. How does the hole and countersink affect mounting? The cylindrical hole with a single-side countersink (40°–60°) provides positive location and secure clamping in standard ISO clamping systems. Can this insert be used for internal turning as well as external? Yes. The geometry and PCD grade permit both external and internal turning operations, provided a suitably sized holder or boring bar is used. What performance improvements are expected with the DX140 grade? The DX140 PCD cutting material typically yields higher cutting speeds and extended tool life in suitable materials, reducing downtime for insert changes and improving process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090202 NS9530 Wendeplatten - Tungaloy
Combine the NS9530 cermet grade with a sharp cutting edge, low cutting forces and ISO compatibility for consistently smooth finishing and reliable cycle times. Order the insert directly via Metav Werkzeuge or consult the Metav advisors for application-specific recommendations. TPGW 090202 NS9530 Tungaloy indexable insert for turning TPGW 090202 NS9530 indexable insert designed for external and internal turning applications, offering a sharp cermet grade for fine finishing and low cutting forces. Sharp uncoated cermet NS9530 grade Optimised for fine finishing and low forces 60° triangular insert, 0.2 mm corner radius Compatibility with ISO turning systems, with hole Superior finish through a sharp cermet grade The combination of NS9530 and an uncoated cermet substrate delivers a consistently sharp cutting edge that reduces cutting forces and promotes excellent surface finish on steels. The grade is tailored for continuous cutting and small depths of cut, which lowers vibration and minimises the need for secondary grinding. For aerospace, automotive or precision component turning where surface integrity matters, this grade reduces rework and helps achieve tighter tolerances with predictable results. Easy integration into ISO turning systems Designed as an ISO-compliant insert, the geometry and dimensions ensure straightforward mounting in standard holders. Key dimensions such as the 60° triangular form, 0.2 mm corner radius and 2.38 mm plate thickness are matched to common clamping systems; the insert is supplied with hole (cylindrical hole + single-sided countersink 40°–60°) for reliable locating and fastening. The specified 11° relief angle supports positive cutting action and compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness, enabling fast set-up and interchangeability across machines. Economical finishing solution for steel turning As a finishing choice for steel, the uncoated cermet excels where low cutting forces and high surface quality are priorities. The absence of a chipbreaker is beneficial for stable, continuous cuts; this reduces the risk of edge chipping when machining at small feeds. The insert suits both external and internal turning in stable setups and is particularly useful for short-run production or high-value parts where finish and dimensional accuracy pay off. The balanced combination of sharpness and wear resistance supports consistent cycle times and predictable tool-life for planners and operators. For detailed application advice, availability of the Tungaloy NS9530 insert or assistance selecting the correct holder and clamping set, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6723313 Manufacturer article number: 6723313 Manufacturer SKU: TUN6723313 Supplier SKU: 6723313-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPGW090202 NS9530 Tungaloy-Wendeplatte Facts Insert angle: 60° Corner radius: 0.2 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 09 Plate form: triangular Special features Uncoated cermet NS9530 Sharp cutting edge for finishing No chipbreaker With hole: cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO turning holders Typical application: external and internal turning System assembly: ISO insert, matching outer holder or boring bar, underlay/clamp set and replacement screws FAQ Which materials are best suited for this insert? The NS9530 uncoated cermet is optimised for steels and provides excellent surface quality when used for finishing operations on steel components. Is the insert suitable for both external and internal turning? Yes. The geometry and hole design make the insert suitable for both external and internal turning when paired with the appropriate holder and clamping set. How does the NS9530 cermet compare to coated carbide for finishing? NS9530 offers a sharper edge and lower cutting forces compared with many coated carbides, improving surface finish in continuous, low-depth operations; tool-life behaviour depends on cutting conditions and workpiece material. What clamping or holder compatibility should be checked? Compatibility is determined by insert form, relief angle, tolerance class, fastening type, size and thickness; the listed cylindrical hole + single-sided countersink (40°–60°) supports standard ISO clamping solutions. Does the insert include a chipbreaker? No, this insert is specified without a chipbreaker and is best used for stable, continuous finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090202 TH10 Wendeplatten - Tungaloy
Combining the TH10 uncoated cemented carbide grade, a precise 0.2 mm corner radius and ISO-conforming triangular geometry, this insert delivers low cutting forces and consistently clean surfaces in turning operations. Order the insert directly via Metav Werkzeuge or consult our technical advisors for fast application support. TPGW090202 TH10 triangular ISO indexable insert for turning — Tungaloy The TPGW090202 TH10 is an ISO-conforming triangular indexable insert designed for general turning of non-ferrous materials where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish. ISO-conforming triangular shape Uncoated TH10 grade for low cutting forces 0.2 mm corner radius for fine surface quality Cylindrical hole with single-sided countersink Consistent surface quality with low cutting forces The insert’s TH10 uncoated grade and cemented carbide substrate are selected to provide a sharp, durable cutting edge that keeps cutting forces low when machining non-ferrous materials. The 0.2 mm corner radius helps to produce fine surface finishes on external and internal turning operations, while the triangular geometry offers three usable cutting edges per indexation. For workshops seeking repeatable finishes, this geometry and grade combination reduces machining marks and supports shorter finishing passes, leading to more predictable downstream processing. Reliable clamping and reduced changeover time A secure seating is essential for repeatable metal removal. The insert features a cylindrical hole with a one-sided countersink (40°–60°) that ensures stable clamping in compatible holders. The 11° relief angle and ISO-conforming form make holder compatibility straightforward when matching by form, relief angle, tolerance class, attachment method, size and thickness. By choosing inserts that fit the existing clamping system, set-up time is reduced and tool changes become quicker, contributing to higher machine uptime and lower process variability. Practical selection for productive turning cycles This grade and geometry suit applications where clean surfaces and low-cutting forces are priorities rather than aggressive metal removal; the insert is supplied without a chipbreaker, so the choice of chip control should match the workpiece material and machine rigidity. For external and internal turning, the ISO series arrangement enables easy replacement and predictable indexing. When selecting tools for a production cell, pair the insert with a suitably rigid holder and select cutting parameters that exploit the TH10 edge to balance tool life and surface integrity. For guidance on parameter windows or holder matching, technical consultation can clarify the optimal combination for specific materials and cycle times. Contact Metav Werkzeuge for tailored application advice on the TPGW090202 TH10 insert or to request the technical datasheet — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and holder compatibility recommendations. Technical data Article number: 6808986 Manufacturer SKU: TUN6808986 Our SKU: 6808986-Tungaloy ISO designation: TPGW090202 Data Plate size: 09 Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 11° Countersink angle: 40°–60° Special features Material: cemented carbide Grade: TH10 (uncoated) Plate form: triangular With hole: cylindrical hole + one-sided countersink Chipbreaker: none Application: turning (external and internal) Series: ISO turning indexable inserts Compatibility depends on form, relief angle, tolerance class, attachment, size and thickness FAQ Which materials are best suited to this insert? The insert is supplied in the uncoated TH10 cemented carbide grade and is optimised for non-ferrous materials and situations where a low cutting force and a clean surface finish are required. What are the key dimensional specifications? This ISO insert has plate size 09, thickness 2.38 mm, corner radius 0.2 mm and the designation TPGW090202; the manufacturer SKU is TUN6808986. Does the insert include a chipbreaker? This specification is supplied without a chipbreaker, so chip control should be addressed by cutting data and holder geometry for stable machining. How is the insert clamped in the holder? The insert features a cylindrical hole with a one-sided countersink (40°–60°) that provides secure seating when matched with an appropriate holder and fastening method. Is this insert suitable for finishing or roughing? With a 0.2 mm corner radius and a sharp TH10 edge, the insert is particularly well suited to finishing and light- to medium-duty turning where surface integrity is important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090204 BX360 Wendeplatten - Tungaloy
Take advantage of a CBN cutting grade (BX360) and ISO compatibility to increase finishing reliability on hardened steels; the triangular TPGW090204 geometry with an 11° clearance angle and 0.4 mm corner radius delivers consistent surface quality and predictable tool life. Order via Metav Werkzeuge or contact the team for application advice. TPGW090204 BX360 Tungaloy indexable insert – triangular CBN insert for turning The TPGW090204 BX360 is a triangular ISO indexable insert designed for external and internal turning, tailored for high-hardness finishing where wear resistance and repeatability are essential. ISO TPGW triangular insert BX360 CBN grade for hardened steels 11° clearance angle for stable cutting Cylindrical hole with single-sided countersink Enhanced finishing on hardened materials with CBN technology The carbide body equipped with cubic boron nitride (CBN) BX360 delivers superior wear resistance in demanding finishing operations on hardened alloys. By using a superabrasive cutting layer, this insert reduces flank wear and maintains a sharp cutting edge for longer periods, which improves process stability and reduces frequency of index changes. The result is a more predictable surface finish and fewer machine stops, so productivity and part conformity increase in high-volume or precision turning environments. Secure mounting and ISO conformity for rapid tool changes Compatibility is governed by ISO geometry — form, clearance, tolerance class, fastening, size and thickness — ensuring a straightforward match to standard external holders and turning bars. The cylindrical hole with single-sided countersink (40°–60°) provides reliable clamping and repeatable seating, while the 11° clearance angle optimises rake and shear conditions for hardened-steel turning. The ISO-based system setup (insert, external holder or boring bar, shim/clamp and replacement screws) simplifies tool management and reduces setup time, supporting lean production workflows. Precision finish from geometry and edge preparation A 0.4 mm corner radius balances strength and fine finishing capability: small enough for tight tolerances yet large enough to withstand interrupted cuts typical in hard turning. The 2.38 mm plate thickness contributes to bending stiffness and stability at the cutting zone, supporting consistent chip formation even without an integrated chipbreaker. For end-of-line finishing and dimension-critical components, this combination yields reduced rework and improved first-pass yield, making it ideal for toolrooms, automotive component producers and gear-manufacturing operations. Practical selection and process guidance The insert is intended primarily for turning applications on hardened steels and, depending on the execution, certain cast irons. Select the appropriate holder geometry and cutting parameters to match the workpiece material and machine rigidity; this insert performs best in stable setups with controlled feed and depth of cut, where its CBN grade can deliver maximum economy through extended life and consistent surface integrity. If further process data or cutting parameters are required, Metav Werkzeuge provides application support to determine the optimal combination of holder, clamping and feeds for the specific production task. Contact Metav Werkzeuge for stock availability and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-focused support Technical data Article number: 6808992 Manufacturer SKU: TUN6808992 Label: TPGW090204 BX360 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Core data Insert designation: TPGW090204 Insert size: 09 Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Corner radius: 0.4 mm Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: without Features Material: carbide Cutting material: cubic boron nitride (CBN) BX360 Insert shape: triangular Application: turning (external and internal) Typical use: finishing of hardened steels, depending on version also cast iron System: ISO insert, external holder/boring bar, shim/clamp, replacement screws Story trigger: indexable inserts (wendeplatten) FAQ Which materials is this insert best suited for? The insert is optimised for hardened steels; the BX360 CBN grade used in this Tungaloy indexable insert provides high wear resistance for finishing operations and, in some executions, can be applied to specific cast-iron variants. Does the insert require a specific holder type? Compatibility follows ISO form and dimensions; the triangular TPGW090204 fits holders matching its form, size and thickness and requires the appropriate shim/clamp and screw for secure mounting. What surface quality can be expected with this geometry? With a 0.4 mm corner radius and stable clamping, the insert supports fine finishing and consistent surface integrity when paired with correct feeds and machine rigidity. Is there a chipbreaker included on the insert? This variant is supplied without a chipbreaker; chip control is managed through machining parameters and holder geometry, making it suited to finishing where precise chip evacuation can be maintained. How does BX360 compare to conventional grades for hard turning? The BX360 CBN grade is engineered for prolonged edge life and stable wear in high-hardness applications, offering a process advantage over conventional carbide grades when machining hardened components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090204 DX140 Wendeplatten - Tungaloy
High-speed PCD performance and extended tool life combine to deliver efficient aluminium and non‑ferrous turning; the ISO‑standard triangular form ensures straightforward integration into existing tool systems. Order the TPGW090204 DX140 directly via Metav Werkzeuge or consult our specialists for application support. TPGW090204 DX140 Tungaloy turning insert — PCD grade for high‑speed aluminium turning A TPGW090204 DX140 indexable insert engineered for external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials. PCD grade DX140 for aluminium and non‑ferrous ISO triangular form TPGW090204, 60° included angle Excellent wear resistance for long runtimes Carbide body with polycrystalline diamond cutting edge Cylindrical hole with single‑side countersink 40°–60° Boosted productivity for aluminium and non‑ferrous components The DX140 cutting grade combines a polycrystalline diamond (PCD) cutting edge with a robust carbide body to enable consistently high cutting speeds and markedly extended service intervals. This composition reduces flank wear and abrasion when machining soft, gummy materials such as aluminium alloys and other non‑ferrous metals, as well as abrasive composites. The outcome is fewer insert changes, reduced downtime and a more economical machining cycle — tangible productivity gains for medium‑ to high‑volume production. Smooth integration with ISO tooling systems Compliance with the ISO designation makes mounting and replacement predictable: the triangular geometry with a 60° included angle and the standard bore arrangement ensures compatibility with a wide range of ISO toolholders. The insert’s fit is defined by form, clearance angle, tolerance class, fastening, size and thickness; the 11° clearance and 2.38 mm plate thickness support stable clamping and heat dispersion during sustained cutting. This standardisation simplifies tooling logistics and shortens setup times on the shop floor. Precise geometry for fine surface quality and repeatability A corner radius of 0.4 mm provides a balance between strength and the ability to achieve good surface finish on turned parts. The absence of a chipbreaker means the cutting action relies on the tool geometry and machining parameters; selecting feeds and speeds appropriate for the material and machine stiffness produces controlled chip formation and consistent edge life. The insert is suited to both external and internal operations when paired with the correct holder, shim and clamping set as part of the ISO insert system. Material details and recommended applications Constructed with a carbide substrate and a PCD cutting layer in DX140 grade, the insert is intended for turning tasks where high wear resistance and excellent edge retention are required. Typical uses include finishing and semi‑finishing aluminium components, machining of non‑ferrous alloys and certain abrasive non‑metallic workpieces. The system approach — insert, matching holder or boring bar, backing shim and clamping kit — ensures repeatable mounting and secure fixation under the forces encountered during high‑speed cutting. If additional machining data or guidance on holder selection is required, Metav Werkzeuge’s technical team is available to advise on cut parameters and tool system configuration. For application checks and further technical specifications, contact info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge today for tailored advice on integrating the TPGW090204 DX140 into production and to secure optimal cutting parameters for each workpiece material Technical data Article number: 6808991 SKU: 6808991-Tungaloy Manufacturer SKU: TUN6808991 Model series: ISO‑Drehwendeschneidplatten Designation: TPGW090204 DX140 Tungaloy insert Facts Radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 With hole: yes Special features Cutting material: polycrystalline diamond (PCD), grade DX140 Body material: Hartmetall (cemented carbide) Plate form: triangular Hole style: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: none Typical application: external and internal turning System components: ISO insert, matching holder/boring bar, backing shim, clamping set and spare screws FAQ What materials is this insert suitable for? The TPGW090204 DX140 insert is designed for aluminium, other non‑ferrous metals and abrasive non‑metallic materials; the PCD cutting edge in DX140 grade gives high wear resistance and long life when machining such materials. Does this insert fit standard ISO holders? Yes, the insert follows the ISO TPGW090204 specification; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness of the holder assembly. Is there a chipbreaker on the insert? No, this insert is supplied without a chipbreaker; chip formation is managed through correct selection of feed, speed and holder geometry for the workpiece. What is the corner radius and why does it matter? The corner radius is 0.4 mm; this radius offers a compromise between edge strength and the ability to achieve good surface finish, particularly important for finishing passes on aluminium components. Can the insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning when paired with an appropriate holder or boring bar and correct clamping elements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 090204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-compliance, a sharp uncoated carbide edge (TH10) and precise geometry for reliable turning of non‑ferrous components; order directly via Metav Werkzeuge or consult the team for holder compatibility and process optimisation. TPGW 090204 TH10 — Indexable Turning Insert (ISO 090204) by Tungaloy The TPGW090204 TH10 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a sharp uncoated cutting edge optimised for non‑ferrous materials. ISO triangular insert for turning Uncoated carbide grade TH10 60° included angle, 0.4 mm radius Cylindrical hole with single‑side countersink High efficiency in non‑ferrous turning The triangular indexable insert delivers low cutting forces and consistently clean part surfaces thanks to its uncoated carbide grade TH10, which is formulated for sharpness and stable chip formation. For applications such as aluminium and brass turning, the combination of a 60° included angle and a 0.4 mm corner radius reduces vibration and minimises burr formation, resulting in improved cycle times and fewer downstream operations. The design supports both external and internal turning when matched with the appropriate holder. Predictable tool life and process stability The TH10 composition focuses on a sharp edge and universal performance rather than heavy coating; this yields predictable wear behaviour where low cutting temperatures and clean chips are priorities. Manufacturers benefit from repeatable surface quality and reduced rework. The insert’s geometry and relief angle help maintain a stable cutting edge under varying cutting parameters, which supports consistent productivity in serial production runs and short‑batch machining alike. Straightforward integration with ISO tooling systems Compliance with ISO dimensions simplifies selection and replacement: the insert is compatible with holders that match by form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with single‑side countersink (40°–60°) enables secure clamping and quick indexing, while the standard thickness and size make stocking and tool set‑up more efficient. Clear identification of the ISO designation aids toolroom planning and reduces mounting errors. Choosing geometry and grade for the application Selecting an insert without a chipbreaker and with a sharp uncoated edge is advantageous when machining non‑ferrous alloys or when low cutting forces are required to avoid workpiece distortion. The triangular form provides three usable corners per insert, offering cost efficiency in medium‑duty turning. Match feed and speed to the grade characteristics to exploit the clean surface finish and prolong edge life, and consider holder rigidity to maximise the performance benefits of this geometry. For high‑precision non‑ferrous turning, contact Metav Werkzeuge for advice on the Tungaloy TPGW090204 TH10 insert and assistance with holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised consultation. Technical Data Article number: 6808990 Manufacturer SKU: TUN6808990 ISO designation: TPGW090204 Model series: ISO indexable turning inserts Material: Carbide Grade/coating: TH10 (uncoated) Dimensions & Angles Size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 11° Features & Compatibility Triangular plate form Cylindrical hole + single‑side countersink (40°–60°) No chipbreaker ISO-compatible for external and internal turning Compatibility determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials are best machined with this insert? The insert is optimised for non‑ferrous materials; the TH10 uncoated carbide promotes low cutting forces and clean chips when turning aluminium and messing. Is the insert compatible with standard ISO holders? Yes, the ISO designation TPGW090204 ensures compatibility with holders that match by form, relief angle, tolerance class, fastening method, size and thickness. How many cutting edges are available per insert? The triangular form provides three usable corners; the insert can be indexed to present a fresh cutting edge as each corner wears. Does this insert include a chipbreaker? No; this particular variant is supplied without a chipbreaker to favour low cutting forces and superior surface finish in the target materials. What is the meaning of the hole and countersink specification? The cylindrical hole with a single‑side countersink (40°–60°) facilitates secure clamping and correct seating in compatible holders, ensuring repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 110202 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, ISO compatibility and precise geometry for reliable finishing of hardened components; the CBN-based BX360 grade offers extended tool life while the ISO TPGW110202 form ensures straightforward integration into established turning tool systems — order directly via Metav Werkzeuge or contact the consultants for application support. TPGW 110202 BX360 Turning Insert (ISO TPGW110202) by Tungaloy The TPGW110202 BX360 is a triangular, ISO‑standard CBN turning insert designed for hard finishing and turning of high‑hardness steels and, depending on the version, cast iron. CBN grade BX360 for hardened steels ISO TPGW 110202 triangular form 11° clearance angle for stable cutting 0.2 mm corner radius for precise profiles High‑performance finishing for hardened components The insert’s CBN cutting material and BX360 grade prioritise abrasion resistance and thermal stability, which translates into fewer tool changes and more uptime on hard materials. Cubic boron nitride is placed second only to diamond in hardness and is optimised here for finishing operations on hardened steels, reducing flank wear and maintaining dimensional accuracy across long runs. The combination of the substrate and coating chemistry provides consistent edge stability, supporting cost‑effective machining of difficult‑to‑cut workpieces. Plug‑and‑play compatibility with ISO tool systems The triangular ISO TPGW110202 form, together with the defined mounting hole and countersink, enables straightforward replacement in compatible holders and boring bars. The insert’s geometry — including a measured 11° clearance angle and standardised thickness — reduces the need for toolholder modifications. For production environments using standard turning systems, this ensures rapid tool changes and repeatable set‑ups, lowering set‑up time and reducing process variability. Geometry tailored for accuracy and surface quality A 0.2 mm corner radius yields a fine balance between edge strength and the ability to produce tight profiles and consistent surface finish. The 60° included angle contributes to predictable chip formation and cutting forces, supporting steady cutting performance in finishing passes. With no integrated chipbreaker, the grade focuses on stable edge life and surface integrity; select a chip control solution separately according to material and stability conditions to optimise chip flow in specific operations. Robust material choice and system considerations Manufactured on a durable carbide substrate with a CBN cutting layer, the insert is suitable for turning applications where hardness and wear resistance are critical. The ISO standardisation of the plate form, size and hole style (cylindrical hole with one‑sided countersink 40°–60°) simplifies inventory management and tool change procedures across multiple machines. Where process reliability matters, pairing this insert with appropriately rigid holders and optimised cutting data will deliver reproducible results and longer service life. Contact Metav Werkzeuge for application advice on Tungaloy CBN inserts and to discuss machining parameters; Metav Werkzeuge can assist with selection, compatibility checks and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808996 Manufacturer SKU: TUN6808996 Label: TPGW110202 BX360 Tungaloy‑insert Dimensions & geometry Size: 11 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Materials & features Substrate: carbide Cutting material: cubic boron nitride (CBN) Grade: BX360 Application: Turning (Drehen) Chipbreaker: none Hole: with hole — cylindrical + one‑sided countersink (40°–60°) Form: triangular Model series: ISO turning inserts Intended for: hardened steels, optional cast iron depending on execution FAQ What materials is this insert intended for? The TPGW110202 BX360 insert is specified for machining hardened steels and, depending on the version, can be used for cast iron finishing. How does the BX360 grade affect tool life? The BX360 CBN grade provides high wear resistance and thermal stability, which extends edge life during abrasive finishing operations. Is the insert compatible with standard ISO holders? Yes; the ISO TPGW110202 geometry and the defined hole/countersink design allow direct fitment to compatible ISO toolholders and boring bars. What surface quality can be expected in finishing cuts? With a 0.2 mm corner radius and stable CBN edge, the insert supports high‑quality surface finishes in finishing passes when used with suitable feeds and stable clamping. Does this insert include a chipbreaker? This specific variant is supplied without a chipbreaker; chip control should be selected separately according to material, depth of cut and machine stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 110202 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, a triangular 60° geometry and consistent holder compatibility for efficient, high-speed turning of aluminium and non-ferrous materials; order directly via Metav Werkzeuge or contact our consultants for application advice. TPGW110202 DX120 Tungaloy – PCD indexable turning insert, triangular 60° A TPGW110202 DX120 Tungaloy indexable insert engineered for high-speed turning of aluminium, non-ferrous alloys and abrasive non-metallic materials. PCD grade DX120 for aluminium and non-ferrous Triangular 60° geometry for versatile turning 11° clearance angle for stable chip formation Long tool life at elevated cutting speeds High-speed performance for aluminium and non-ferrous alloys The insert uses PCD technology in grade DX120, offering exceptional wear resistance and thermal stability for machining aluminium and other non-ferrous materials. The polished PCD cutting edge enables high cutting speeds with minimal built-up edge, translating into long tool life and fewer index changes. For operations where surface integrity and repeatability matter, the diamond-based cutting surface reduces abrasive wear and maintains edge integrity over extended production runs. Precision geometry that supports consistent turning quality The triangular 60° form delivers robust cutting geometry suitable for both external and internal turning. The geometry includes a 0.2 mm radius and 11° clearance angle, which together enhance edge strength while enabling a fine surface finish on soft to semi-hard materials. The insert is manufactured with hole and a cylindrical hole plus one-sided countersink (40°–60°), ensuring secure clamping in compatible holders and reliable repeatability within ISO indexable systems. System integration and process benefits for production environments Designed as part of an ISO indexable system, the insert fits into standard external holders or boring bars when the form, clearance, tolerance class, fastening, size and thickness match. The absence of an integrated chipbreaker makes the grade and tool geometry selection critical for chip control; when paired with suitable holders and process parameters, the result is stable chip formation and reduced downtime due to fewer insert changes. The carbide substrate provides the necessary support for the PCD layer, balancing toughness and cutting-edge endurance for consistent production throughput. Contact Metav Werkzeuge for tailored application support on Tungaloy PCD inserts and secure the TPGW110202 DX120 for high-speed aluminium turning — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6808994 SKU: 6808994-Tungaloy Manufacturer SKU: TUN6808994 Name: TPGW110202 DX120 Tungaloy-Wendeplatte Facts Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Manufacturer article number: 6808994 Special features Material: Hartmetall Cutting material: PCD (polycrystalline diamond) DX120 Shape: triangular Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) Series: ISO-Drehwendeschneidplatten Chipbreaker: without Typical application: turning (external and internal) FAQ What materials is the insert suited for? The TPGW110202 DX120 Tungaloy insert is specified for aluminium, non-ferrous alloys and abrasive non-metallics thanks to its PCD DX120 grade. How does the PCD grade affect tool life? The DX120 PCD grade gives high wear resistance and thermal stability, which extends the effective life of the insert under high cutting speeds and abrasive conditions. Is the insert compatible with standard ISO holders? Compatibility depends on the holder’s form, clearance, tolerance class, fastening, size and thickness; the TPGW110202 fits ISO-standard indexable systems when these parameters match. Does the insert include a chipbreaker? No, this insert is supplied without an integrated chipbreaker; chip control must be achieved through grade selection and suitable holder geometry. What clamping method is required for secure mounting? The insert is supplied with hole and a cylindrical hole plus one-sided countersink (40°–60°), designed for secure fastening using standard screws and clamping sets in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110202 DX140 Wendeplatten - Tungaloy
High-speed productivity and notably extended tool life from the DX140 polycrystalline diamond grade, combined with ISO compatibility and a 60° triangular form, ensure dependable turning performance; order the TPGW110202 DX140 directly via Metav Werkzeuge or consult the team for holder matching and process optimisation. TPGW110202 DX140 indexable turning insert — ISO triangular form for turning TPGW110202 DX140 is an ISO-standard triangular indexable insert designed for external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metal materials. PCD grade DX140 for abrasive non‑ferrous materials ISO TPGW110202 triangle form, 60° included angle Long tool life at high cutting speeds Compatible with ISO turning holders (through‑hole) Maximise productivity with a PCD grade engineered for abrasive materials The DX140 polycrystalline diamond (PCD) cutting material delivers a combination of high cutting speeds and very long tool life, which translates directly into fewer tool changes and reduced machine downtime. The triangular TPGW110202 geometry, with a nominal 60° included angle and a 0.2 mm corner radius, offers robust edge support for certain finishing and high‑feed turning strategies. Polycrystalline diamond is a hard, wear‑resistant cutting material manufactured from diamond particles sintered onto a substrate; for machinists unfamiliar with PCD, this means a tool grade that resists abrasive wear in aluminium alloys and non‑ferrous applications where conventional carbide would abrade rapidly. Compatibility and mounting: engineered for ISO systems and stable clamping Compatibility with standard holders is determined by form, relief angle, tolerance class, fastening, size and thickness; the insert is supplied in the ISO triangle format and accepts common clamping systems. The insert’s through‑hole with a cylindrical hole and one‑sided countersink (40°–60°) ensures reliable seating and repeatable positioning in indexable toolholders. The 11° relief promotes effective shear formation on light cuts while helping to avoid rubbing under marginal feed conditions. Where a chipbreaker is required for specific chip control, select an appropriate geometry and matching grade to balance stability and surface finish. Cost‑effectiveness through process stability and reduced interventions For production runs that prioritise low running costs and consistent component quality, the DX140 grade is targeted at applications where long life and stable wear behaviour matter most. The 2.38 mm plate thickness and the defined tolerance class ensure a predictable contact surface with the clamping assembly, reducing vibration and improving surface finish consistency. By enabling elevated cutting parameters on aluminium and other non‑ferrous materials, the insert supports shorter cycle times and higher throughput. The economic advantage becomes apparent in operations with frequent part cycles, where fewer index changes and predictable regrind intervals translate to lower total cost per component. Contact Metav Werkzeuge for personalised holder recommendations and order details for the TPGW110202 DX140 insert — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808995 Manufacturer SKU: TUN6808995 SKU: 6808995-Tungaloy Series: ISO‑Drehwendeschneidplatten Application: Turning Facts Insert designation: TPGW110202 Grade: DX140 Cutting material: polycrystalline diamond (PCD) Shape: triangular, 60° Size: 11 Thickness: 2.38 mm Special features Corner radius: 0.2 mm Relief angle: 11° Hole: with through‑hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: none Material (body): carbide FAQ What materials is this insert intended for? The TPGW110202 DX140 insert is intended primarily for aluminium, non‑ferrous metals and abrasive non‑metal materials where PCD performance provides extended life. How does the DX140 grade improve productivity? DX140’s polycrystalline diamond cutting layer offers high wear resistance and allows elevated cutting speeds, which reduces cycle times and limits the frequency of index changes for the TPGW110202 insert. Is a chipbreaker included and how does that affect use? This insert is supplied without a chipbreaker; chip control must be achieved via toolholder selection, cutting parameters and, where necessary, an alternative insert geometry with an integrated chipbreaker. Which holders are compatible with this insert form? Compatibility is governed by the triangular ISO form, hole location and thickness; the TPGW110202 is compatible with standard ISO turning holders designed for triangular inserts and through‑hole clamping. What does the 0.2 mm corner radius mean for finishing? A 0.2 mm corner radius provides a balance between edge strength and surface finish, enabling controlled finishing passes while maintaining resistance to edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 110202 TH10 Wendeplatten - Tungaloy
Combining the sharp TH10 uncoated carbide grade with a 0.2 mm corner radius and ISO triangular geometry, this insert provides low cutting forces and clean surface finishes for turning non‑ferrous components. Order the Tungaloy insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and application advice. TPGW110202 110202 TH10 — Tungaloy ISO turning insert (triangular, 0.2 mm radius) The TPGW110202 TH10 is an ISO triangular indexable insert for external and internal turning, optimised for low cutting forces and fine surface quality in non‑ferrous machining. ISO triangular insert for turning Uncoated carbide grade TH10 0.2 mm corner radius for fine finish Centre hole with cylindrical plus countersink High‑efficiency turning for non‑ferrous components The uncoated carbide TH10 grade is designed as a sharp, universal option where low cutting forces and a clean surface are priorities. As an ISO format insert, it gives predictable behaviour when machining aluminium, copper alloys and other non‑ferrous materials; the uncoated cutting edge minimises built‑up edge and reduces friction in soft, gummy workpieces. The result is consistent chip formation and a reliable surface finish while maintaining good tool life under appropriate cutting conditions. Precision geometry that improves surface finish and reproducibility With a 0.2 mm corner radius and 60° triangular geometry, this insert balances edge strength and the ability to produce fine finishes. The 11° relief angle reduces rubbing on the flank face, while the 2.38 mm thickness provides stiffness in the clamped assembly. These measurable geometry parameters translate directly into better vibration resistance and stable cutting on short to medium overhangs, helping to achieve repeatable dimensional accuracy and consistent component appearance. ISO compatibility and secure mounting for production environments The insert follows the ISO designation TPGW110202, ensuring interchangeability with standard holders when form, relief, tolerance class, clamping and thickness match. The centre hole with cylindrical plus single‑side countersink (40°–60°) allows robust fastening and straightforward orientation in indexable holders, reducing downtime during index changes. Consider the complete system — holder, clamp pad and replacement screws — to preserve seating accuracy and repeatability in serial machining. Operational advantages and recommended applications Absent a chipbreaker (no chipbreaker), this insert is best used where free‑flowing chips are acceptable or where secondary operations (such as finishing) demand an uninterrupted cutting edge. Typical uses include external turning and internal boring of non‑ferrous components where low cutting force and surface quality are essential. The carbide grade offers a combination of sharpness and wear resistance that supports productive machining while simplifying process setup for a broad range of soft to medium‑hard non‑ferrous materials. For reliable turning performance with Tungaloy’s TH10 grade, contact Metav Werkzeuge for ordering and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808993 Manufacturer SKU: TUN6808993 Model series: ISO turning inserts Material: carbide Grade/coating: TH10, uncoated Shape: triangular Core numerical data Size (inscribed circle): 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Geometry angle: 60° Manufacturer article number: 6808993 Special features ISO designation: TPGW110202 With hole and single‑side countersink (40°–60°) No chipbreaker For turning (external and internal) Compatible with ISO holders when form, tolerance and clamping match FAQ Which materials is the insert suitable for? The Tungaloy TPGW110202 TH10 insert is intended primarily for non‑ferrous materials such as aluminium and brass, where the uncoated cutting edge supports low cutting forces and reduced built‑up edge. How is the insert mounted in a toolholder? The insert uses a centre hole with a cylindrical bore and a single‑side countersink (40°–60°); secure clamping with a matching holder, clamp pad and screw ensures correct seating and repeatable orientation for the TPGW110202 geometry. Does this insert include a chipbreaker? No, the TPGW110202 TH10 comes without a chipbreaker, which is suitable when free‑flowing chips or uninterrupted sharp edges are required for finishing operations. What effect does the 0.2 mm corner radius have on machining? A 0.2 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes; it reduces the risk of edge chipping while keeping contact stresses moderate, helping to improve surface quality on turned parts. Is the insert compatible with all ISO triangular holders? Compatibility depends on matching the ISO form, relief angle, tolerance class, clamping method, size and thickness; the TPGW110202 follows ISO standards but verification against the specific holder specifications is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110204 BX360 Wendeplatten - Tungaloy
Take advantage of the CBN-based cutting performance and the ISO-standard geometry for consistent finishing of high-hardness components; order the insert directly via Metav Werkzeuge or contact our consultants for application support. TPGW110204 BX360 Tungaloy turning insert — CBN grade for hardened steels, 60° triangular geometry The TPGW110204 BX360 is an ISO-standard triangular indexable insert designed for external and internal turning, engineered to deliver wear-resistant finishing in hardened steels and, depending on the variant, cast iron. ISO triangular insert, 60° geometry CBN grade BX360 for hardened steels 11° relief angle for stable cutting Countersunk hole for secure clamping High-precision finishing for hardened components The BX360 grade uses CBN (cubic boron nitride) as the cutting material, which provides superior hardness and thermal stability compared with conventional carbides. This makes the insert particularly suited to final machining of hardened steels, where tool wear and edge degradation would otherwise limit productivity. The result is a more predictable tool life and improved surface integrity on the workpiece. Extended edge life and reliable wear behaviour A high-hardness cutting material translates into reduced flank wear under abrasive conditions and stable cutting edges during finishing passes. The insert’s substrate, a durable carbide backing, supports the brittle CBN layer to resist chipping. For production environments that demand repeatable batch quality, this combination reduces rework and contributes to a lower cost per part through longer intervals between tool changes. Secure clamping for repeatable accuracy The insert features a hole with countersink (cylindrical hole plus one-sided countersink 40°–60°) to ensure positive mechanical location and consistent clamp force. Secure fastening in the toolholder minimises vibration and deflection, which preserves dimensional accuracy during both external and internal turning. This mechanical stability is essential for tight-tolerance finishing operations. Geometry tuned for stable cutting and surface finish The triangular 60° shape, paired with an 11° relief angle, balances strength and cutting clearance for finishing cuts; the 0.4 mm corner radius supports fine surface finishes while maintaining edge resilience. A thickness of 2.38 mm contributes to insert rigidity and helps maintain consistent chip formation under low-depth finishing passes. ISO compatibility and system integration As an ISO-series indexable insert, compatibility with a holder is defined by insert shape, relief angle, tolerance class, fastening method, size and thickness. The insert integrates into standard toolholder systems for turning, enabling straightforward retrofitting in existing machining stations without extensive requalification of the tool system. Application guidance and selection criteria This insert is specified for turning operations where high hardness and wear resistance are required. Note that the insert is supplied without a chipbreaker, so selection of a chip control feature should be matched to material, cutting mode and machine rigidity. For operations on cast iron or other alloys, select the appropriate grade and chip control to suit the workpiece and process stability. Contact Metav Werkzeuge for tailored application advice and to arrange procurement of Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809000 SKU: 6809000-Tungaloy Manufacturer SKU: TUN6809000 Model series: ISO indexable turning inserts Insert designation: TPGW110204 BX360 Material: carbide Facts Size: 11 mm Thickness: 2.38 mm Relief angle: 11° Corner radius: 0.4 mm Included angle: 60° Special features CBN cutting material, grade BX360 Suitable for hardened steels and, depending on variant, cast iron Triangular insert with hole Cylindrical hole plus one-sided countersink (40°–60°) No chipbreaker supplied ISO-standard indexable turning plate Application: turning FAQ What materials is this insert intended for? The BX360 CBN grade insert is intended for machining hardened steels and, depending on the specific variant, can be used on cast iron; selection should match the workpiece hardness and process. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation guarantees that the insert fits ISO-compliant holders with matching geometry. Does the insert include a chipbreaker? This particular insert is supplied without a chipbreaker, so chip control must be achieved via cutting data selection or by choosing a variant with a dedicated chip-control geometry. What clamping features support stability? The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures positive mechanical location and consistent clamp force for repeatable machining accuracy. Can the insert be used for both external and internal turning? Yes, the triangular 60° geometry and ISO format allow the insert to be used for both external and internal turning operations when paired with a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110204 DX140 Wendeplatten - Tungaloy
Take advantage of PCD-grade DX140 for high-speed aluminium turning and the ISO 60° triangular geometry to reduce tool changes and raise productivity; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGW110204 DX140 ISO turning insert for turning — Tungaloy The TPGW110204 DX140 is an ISO-format triangular turning insert with a PCD cutting grade for high-speed machining of aluminium and other non‑ferrous materials, designed to deliver extended tool life and stable cutting behaviour in demanding production environments. PCD grade DX140 for aluminium and non‑ferrous metals High cutting speeds with extended tool life ISO TPGW110204 triangular insert, 60° geometry Central hole with cylindrical seat and countersink Maximise productivity with PCD performance The PCD cutting edge in DX140 offers a combination of hardness and wear resistance that is especially effective in aluminium and abrasive non‑metallic materials. As a polycrystalline diamond solution, PCD maintains a sharp cutting profile at high cutting speeds, which translates into fewer interruptions for tool changes and a consistent part finish. The result is lower cost per part through reduced machining time and longer service intervals. For shops transitioning from conventional carbide tools, the diamond grade reduces built‑up edge and improves surface integrity without complex process changes. ISO compatibility that simplifies setup and repeatability Built to ISO dimensions as a TPGW110204 insert, the triangular geometry with a 60° included angle ensures compatibility with a wide range of external holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; adherence to ISO standards means predictable clamping and repeatable positioning in series production. The standardised format reduces setup time, simplifies inventory management and helps maintain consistent machining parameters across machines and shifts. This systematic approach supports leaner workflows and predictable throughput in batch production. Stable clamping and geometry for reliable surface quality The insert’s central hole with a cylindrical seat and a single‑side countersink (40°–60°) provides secure clamping and concentricity, reducing chatter in finish cuts. With a 0.4 mm corner radius and an effective rake angle of 11°, the geometry is optimised for controlled chip formation in light to moderate depth cuts; note that this grade is supplied without a chipbreaker, so the selection of an appropriate holder and feed strategy is recommended to manage swarf. The substrate beneath the diamond layer is a robust carbide base offering the mechanical support required for stable cutting, while the DX140 cutting material targets long service life and constant dimensional results in aluminium and other non‑ferrous alloys. For precision aluminium turning projects requiring long tool life, contact Metav Werkzeuge for availability of the Tungaloy TPGW110204 DX140 insert and tailored process guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808999 Manufacturer SKU: TUN6808999 SKU: 6808999-Tungaloy Model series: ISO turning indexable inserts Designation: TPGW110204 DX140 Manufacturer: Tungaloy Facts Size (inscribed circle): 11 Thickness: 2.38 mm Corner radius: 0.4 mm Rake angle: 11° Insert angle: 60° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Cutting material: PCD (polycrystalline diamond), DX140 grade Substrate: carbide Plate shape: triangular Chipbreaker: none Typical application: turning Suitable for: aluminium, non‑ferrous metals, abrasive non‑metals Compliance: ISO‑dimensioned insert for standard holders FAQ What materials is this insert best suited for? The DX140 PCD grade is engineered for aluminium and other non‑ferrous metals as well as abrasive non‑metallic materials; the TPGW110204 DX140 insert delivers long life under high cutting speeds in these materials. Is the insert compatible with standard ISO TPGW holders? Yes, the insert follows ISO dimensions for the TPGW110204 form, so compatibility with holders is determined by matching form, clearance angle, size and thickness. Why choose PCD over conventional carbide for aluminium turning? PCD provides superior wear resistance and a sharper cutting edge at high speeds, resulting in longer tool life and improved surface finish compared with conventional carbide in aluminium applications. Does this insert include a chipbreaker? This version is supplied without a chipbreaker; machining strategies and holder selection should be matched to the DX140 grade to ensure effective chip control. What are the key geometry values to consider when programming feeds and speeds? Important values are the 60° included angle, 11° rake, 0.4 mm corner radius and the plate thickness of 2.38 mm, which influence cutting forces, feed recommendations and achievable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110204 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, the GH110 Tungaloy grade and a secure triangular 60° geometry for consistent tool life and surface quality; this insert supports productive turning with reliable edge stability. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPGW110204 GH110 ISO indexable turning insert (triangle, 60°) by Tungaloy The TPGW110204 GH110 is an ISO-standard indexable insert for turning, designed for reliable wear resistance and secure clamping in a wide range of turning operations. Wear-resistant GH110 grade Triangle 60° geometry for versatility 0.4 mm corner radius for finishing cuts Compatible with ISO turning holders Consistent wear resistance for productive turning The GH110 carbide grade delivers a balanced combination of wear resistance and edge stability, making it suitable for sustained turning tasks where repeatable performance matters. Manufactured as a cemented carbide indexable insert, the geometry and substrate combine to resist flank wear while maintaining cutting-edge integrity. This leads to longer tool life and fewer index changes, which supports steady cycle times and reduced tooling costs. For customers transitioning from general-purpose grades, the GH110 offers a step-up in durability without sacrificing the toughness needed for medium-duty applications. ISO compatibility and secure clamping for machining reliability As an ISO-standard plate, this triangular insert features a 60° included angle and a central hole with a single-sided countersink (40°–60°), ensuring a stable clamping interface with matched holders and screws. The insert’s fit depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters is essential to achieve repeatable concentricity and minimise chatter. The TPGW110204 designation identifies the geometry and size so that tooling engineers can quickly verify holder compatibility and replacement scheduling. Standardised interfaces reduce setup time and simplify inventory management across multiple lathes. Practical geometry and handling that improve surface finish A corner radius of 0.4 mm and a clearance (free) angle of 11° make this plate suitable for a mix of finishing and light-medium roughing operations, where a modest nose radius helps produce consistent surface quality without excessive cutting forces. The plate thickness of 2.38 mm contributes to rigidity at the cutting zone, while the absence of an integrated chipbreaker means the chip control must be matched to the workpiece material and cutting parameters; selecting an appropriate chipbreaker and insert sort for a specific material will optimise chip formation and tool life. For applications in external and internal turning, the triangular form offers three usable edges, increasing value per insert and reducing downtime for index changes. Contact Metav Werkzeuge today for tailored advice on selecting GH110 inserts from Tungaloy or to discuss holder compatibility and application optimisation; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6808997 Manufacturer SKU: TUN6808997 SKU: 6808997-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Plate size: 11 Plate thickness: 2.38 mm Clearance (free) angle: 11° Included angle: 60° Countersink range: 40°–60° Design / Special features Grade: GH110 (Tungaloy) Material: cemented carbide Plate form: triangular Hole: with hole; cylindrical hole + single-sided countersink Chipbreaker: none Intended use: turning ISO designation: TPGW110204 FAQ What materials is this insert suitable for? The TPGW110204 GH110 insert is optimised for general turning applications; the GH110 grade provides good wear resistance and edge stability across a broad range of steels and alloyed materials. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius on this Tungaloy insert favours improved surface finish with moderate cutting forces, making it suitable for finishing passes and light roughing where surface integrity is required. Is the insert compatible with standard ISO holders? Yes, the ISO designation TPGW110204 indicates compatibility with ISO-standard turning holders, provided that holder form, clearance angle, tolerance class, fastening and size are matched. Does the insert include a chipbreaker? The TPGW110204 GH110 insert is supplied without an integrated chipbreaker; chip control should be selected according to workpiece material and machining conditions. How many usable edges are available on this triangular insert? The triangular geometry offers three cutting edges per insert, enabling multiple index positions to extend the effective life of each plate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110204 TH10 Wendeplatten - Tungaloy
Benefit from a sharp, uncoated TH10 carbide cutting edge combined with a compact 0.4 mm nose radius and a standard ISO triangular form for reliable low-force turning and clean surface finishes; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. TPGW110204 TH10 triangular indexable turning insert — ISO triangular insert for turning, 60° included angle — Tungaloy A TPGW110204 TH10 indexable turning insert designed for external and internal turning, offering a sharp, uncoated carbide grade optimised for non‑ferrous materials and operations requiring low cutting forces and good surface quality TPGW110204 triangular ISO insert Uncoated carbide grade TH10 0.4 mm nose radius for fine finishes 60° insert angle with centre hole Higher productivity through lower cutting forces and cleaner finishes The combination of a sharp uncoated carbide grade and a small 0.4 mm nose radius reduces cutting resistance and helps maintain a stable cut when machining softer or non‑ferrous alloys. The absence of a chipbreaker means the insert promotes consistent chip formation where the workpiece material and machining parameters naturally allow controlled chip flow. For production environments aiming to increase throughput without sacrificing surface integrity, this triangular ISO solution provides a focused improvement in machining efficiency while keeping insertion and replacement procedures straightforward. System compatibility and straightforward toolset integration Designed to the ISO indexable insert system, the triangular geometry with a 60° included angle and a central hole with one‑sided countersink (40°–60°) ensures compatibility with a wide range of standard toolholders and boring bars. The insert functions as part of a system comprising the insert itself, a matching external holder or boring bar, backing pad or clamp set and the appropriate fixing screw. Attention to holder form, clearance angle, tolerance class, fixing method, size and thickness is essential to secure repeatable positioning and steady machining results. When to choose the TH10 uncoated carbide grade The TH10 grade is an uncoated, sharp universal grade tailored for non‑ferrous materials and applications where a clean cutting edge supports low cutting forces and superior surface finish. Because the edge is uncoated, it performs best where built‑up edge is minimal and cutting temperatures are moderate; this can be particularly advantageous for delicate finishes or fine detail work. Selecting this grade reduces the need for coating‑related trade‑offs and simplifies regrind or edge maintenance when required. Practical selection tips for geometry and application Match the triangular 11 mm size and 2.38 mm thickness to the stability of the setup: the compact form promotes accessibility in confined or internal turning, while the 0.4 mm corner radius balances edge strength with the demand for fine finishing. If chip control is a concern, select an appropriate chip control strategy at the holder level or opt for a different insert variant with integrated chipbreaker. The insert’s ISO conformity simplifies procurement and replacement logistics, supporting uninterrupted production flows. For precise integration into existing toolholders or to discuss process advantages of the Tungaloy TH10 solution, contact Metav Werkzeuge for technical advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808998 SKU: 6808998-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Insert designation: TPGW110204 Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Relief (clearance) angle: 11° Included angle: 60° Material and special features Material: carbide Grade/coating: TH10 (uncoated) Shape: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: none Application: turning (external and internal) FAQ What materials is this insert intended for? The TH10 uncoated grade is intended primarily for non‑ferrous materials and applications where a sharp edge supports low cutting forces and clean surface finishes. How does the lack of a chipbreaker affect performance? Without an integrated chipbreaker, chip control depends on the workpiece material and holder geometry; use an appropriate holder or process strategy to manage chips effectively when machining with this insert. Which holders are compatible with the insert? Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the ISO designation ensures broad compatibility with standard triangular insert holders and boring bars. Can the insert be used for internal turning? Yes, the compact triangular design and small nose radius make it suitable for both external and internal turning where access and finish are priorities. Is the edge suitable for regrinding or edge maintenance? Being uncoated, the carbide edge can be reground or honed as required; edge maintenance will depend on the operational wear pattern and reconditioning capabilities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGW 110304 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp universal grade and ISO compatibility to lower cutting forces and improve surface finish in non‑ferrous turning operations; order directly via Metav Werkzeuge or consult the specialists if holder compatibility requires confirmation. TPGW 110304 TH10 — Indexable turning insert (uncoated carbide) by Tungaloy The TPGW110304 TH10 is an ISO‑format indexable turning insert intended for external and internal turning where low cutting forces and clean surfaces are required. TPGW110304 TH10 by Tungaloy ISO‑standard triangular indexable insert Uncoated carbide for low cutting forces 0.4 mm corner radius, 11° relief angle High productivity from low cutting forces and a sharp grade The combination of uncoated carbide and the TH10 grade provides a consistently sharp cutting edge that reduces cutting resistance. Lower forces translate into less spindle load, reduced power consumption and a more stable cutting process; the immediate benefit is a cleaner surface finish on non‑ferrous components and fewer rework cycles. This makes the insert particularly effective where gentle material removal is more important than aggressive metal removal rates. Predictable fit and quick changeover with ISO format Manufactured to ISO standards, the insert ensures predictable mounting and interchangeability. Compatibility with a holder is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the 11° relief angle and triangular outline support reliable clamping and precise seating. The cylindrical hole with single countersink (40°–60°) provides a secure centre location and repeatable positioning, which reduces setup time and helps maintain process stability across batch runs. Suited to non‑ferrous work and fine finishing This grade and geometry are optimised for non‑ferrous materials and turning operations that prioritise surface quality. The insert is supplied without a chipbreaker, so it performs best in stable, controlled cutting conditions and with appropriate feed selection; operators benefit from smoother chip flow and minimal built‑up edge formation. The 0.4 mm corner radius balances cutting edge strength with the ability to generate fine component finishes where tolerances and appearance matter. System approach for efficient workshop stocking and maintenance The insert is part of an ISO insert system: the full setup comprises the indexable insert, a matching external holder or boring bar, a backing pad/clamping kit and replacement screws. That modular approach simplifies inventory management and speeds changeovers during shift changes. For workshops aiming at predictable cycle times and low downtime, the standardised dimensions and clear designation support fast identification and economical stocking of spare inserts. For genuine Tungaloy TH10 turning inserts and expert advice on holder compatibility, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) to request availability and guidance for specific turning applications Technical data Article number: 6809002 Manufacturer SKU: TUN6809002 SKU: 6809002‑Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: 110304 Facts Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Size: 11 Included angle: 60° Special features Material: carbide (uncoated) Grade: TH10 Shape: triangular Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Chipbreaker: none Typical application: turning (external and internal) FAQ Is the insert suitable for steel machining? The TPGW110304 TH10 is optimised for non‑ferrous materials and operations requiring low cutting forces; for medium to hardened steels a coated grade or a different geometry is recommended. How is holder compatibility determined? Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the ISO designation 110304 and the 11° relief angle are the key reference values when selecting a compatible holder. Does this insert include a chipbreaker? This version is supplied without a chipbreaker, which suits stable turning conditions and applications where unobstructed chip flow is preferred. What edge radius should be expected and what does it influence? The insert has a 0.4 mm corner radius, offering a compromise between edge strength and surface finish quality; a smaller radius improves finish, while a larger radius increases edge robustness. Can the insert be used for internal boring as well as external turning? Yes; the ISO‑format triangular geometry and central hole make the insert usable for both external and internal turning, provided the holder or boring bar is specified for the task. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGW 130302 BX360 Wendeplatten - Tungaloy
Benefit from high wear resistance and precise geometry for predictable finishing of hardened components; the combination of the BX360 CBN grade and a 0.2 mm corner radius supports consistent surface quality and long tool life. Order the insert directly via Metav Werkzeuge or consult the application specialists for process parameters and holder compatibility. TPGW130302 BX360 Tungaloy turning insert — CBN grade, 0.2 mm radius The TPGW130302 BX360 is an ISO-format turning insert designed for hard turning and wear-intensive finishing operations on hardened steels and, depending on the version, cast iron. CBN grade BX360 for hardened steels 0.2 mm corner radius for fine finishing 11° clearance angle for stable cutting Triangular 60° insert with locating hole Reliable finishing for hardened components The CBN cutting material BX360 is engineered for high-hardness machining, offering significantly improved wear resistance compared with conventional carbide grades. This makes the insert especially suited to final-pass operations on hardened steels, where dimensional stability and surface integrity are critical. The 0.2 mm corner radius reduces the risk of chatter during finishing and helps achieve a fine surface finish with minimal reworking. Explained simply: CBN is a superabrasive that maintains cutting geometry under high temperatures and abrasive wear, so process stability is enhanced and cycle-time variability is reduced. Secure fit and ISO compatibility for predictable set-up Compatibility with a toolholder is determined by shape, relief angle, tolerance class, fastening, size and thickness; the ISO-format design of this triangular insert ensures interchangeability with matching external holders and boring bars. The 60° triangular form and cylindrical hole with single-sided countersink (40°–60°) provide positive location and straightforward clamping in standard ISO seats. With an 11° clearance angle and a plate thickness of 3.18 mm, the geometry supports stable cutting forces and reliable seating, lowering the chance of vibration-related wear and improving repeatability across production batches. Consistent productivity and clear process advantages Built from a carbide substrate with a CBN cutting layer, this insert balances toughness and wear resistance to extend operational life in finish machining. The design comes without a chipbreaker, which suits tight-tolerance finishing where chip form must be controlled by cutting parameters and toolpath rather than by aggressive geometry. For production environments focused on repeatable tolerances and surface quality, the predictable performance reduces tool changes and unscheduled downtime. Choosing this solution supports higher first-pass yields and simplifies tool inventory by standardising on ISO-format turning plates. For application advice or to order TPGW130302 BX360 Tungaloy CBN inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will advise on holder compatibility and process settings. Technical data Article number: 6809006-Tungaloy Manufacturer SKU: TUN6809006 Manufacturer article number: 6809006 Designation: TPGW130302 BX360 Tungaloy turning insert Model series: ISO turning indexable inserts Facts Angle: 60° Corner radius: 0.2 mm Clearance angle: 11° Thickness: 3.18 mm Size: 13 mm Special features Cutting material: CBN (BX360) Substrate material: carbide Plate form: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: none Application: turning; intended for hardened steels and, depending on version, cast iron FAQ What materials is this insert suited for? The TPGW130302 BX360 insert uses CBN and is intended primarily for hardened steels and, in certain executions, for cast iron machining. What are the key geometry values to check for holder compatibility? Check the 60° triangular form, 11° clearance angle, 3.18 mm thickness and 13 mm size when matching the insert to a compatible ISO holder or boring bar. Does the insert include a chipbreaker? No, this Tungaloy insert is supplied without a chipbreaker, making it suitable for finishing passes where chip control is managed by cutting data and machine strategy. How does the hole style affect mounting? The cylindrical hole with single-sided countersink (40°–60°) ensures precise location and stable clamping in standard indexable insert seats, simplifying replacement and repeatability. Can this insert be used for internal as well as external turning? Yes; the ISO-format design and robust CBN cutting layer make it appropriate for both external and internal turning operations, provided the correct holder and process parameters are chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com