TPMT 110202 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of universal AH725 grade performance, precise 0.2 mm nose geometry and secure clamping for consistent turning results; order the insert directly via Metav Werkzeuge or request individual advice from our consultants. TPMT 110202 AH725 triangular indexable insert for turning — Tungaloy The TPMT 110202 AH725 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a universal PVD-coated carbide grade optimised for steels and stainless steels. Universal PVD-coated carbide grade AH725 ISO triangular form for standard holders 0.2 mm nose radius for fine finishes Cylindrical hole with 40°–60° countersink Consistent metal removal with a universal, process-secure grade The PVD-coated AH725 grade combines wear resistance and fracture toughness to deliver process reliability across a wide range of steels and stainless steels. As a PVD-coated carbide insert with the PS chipbreaker, it is aimed at turning operations where material mix or small-tooling setups demand robust, repeatable performance. The combination of the AH725 coating and the chip control geometry reduces the risk of unexpected tool failure and supports longer effective tool life, which benefits cycle-time stability on production batches. Geometry tuned for surface quality and repeatable clamping The triangular shape and the 0.2 mm nose radius are configured to balance edge strength with the ability to achieve fine surface finishes on external and internal features. The 11° clearance minimises rubbing while maintaining cutting edge support; the 2.38 mm plate thickness contributes to rigidity for interrupted cuts. The insert's central cylindrical hole with single-side countersink (40°–60°) ensures reliable seating and torque transmission in common ISO clamping systems, reducing the chance of index shift during high-stability turning tasks. ISO compatibility and practical application guidance for turning This insert belongs to the ISO turning indexable insert family and is compatible with holders that match the insert form, clearance, tolerance class, attachment and thickness. A typical system comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Select the PS chipbreaker and the AH725 grade when machining a mix of steels or when process security is the priority; for highly stable setups aiming solely at maximum metal removal, alternative chipbreaker geometries may be considered. The insert is suitable for both finishing and medium-turning operations where controlled chips and repeatable seating are required. Practical benefits and selection advice for production use Using a universally tough, PVD-coated insert reduces tool inventory complexity while maintaining surface quality and dimensional stability in turning operations. The triangular form provides three indexing edges per insert, improving cost efficiency per cutting edge. When changing holders or adapting to different machine setups, verify holder compatibility by checking form and size details; correct match prevents misclamping and preserves the insert life and process reproducibility. For reliable, versatile turning with Tungaloy’s AH725-grade inserts, contact Metav Werkzeuge for application-specific recommendations and timely supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856675-Tungaloy Manufacturer SKU: TUN6856675 Manufacturer item no.: 6856675 Designation: TPMT110202-PS AH725 Model series: ISO turning indexable inserts Material: cemented carbide Facts Nose radius: 0.2 mm Plate thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Size designation: 11 Special features Plate form: triangular Chipbreaker: PS Coating / grade: AH725 (PVD-coated) Hole: cylindrical hole + single-side countersink (40°–60°) Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws Compatibility: ISO-standard holders (form, size, thickness, attachment, tolerance) FAQ What materials is this insert suitable for? The TPMT 110202 AH725 insert is intended primarily for steels and stainless steels; the AH725 PVD-coated carbide grade provides a balance of toughness and wear resistance for mixed-material turning. How does the PS chipbreaker affect cutting? The PS chipbreaker on this insert promotes controlled chip formation and evacuation in a range of turning conditions, improving process security and reducing the likelihood of built-up edge on the cutting face. Which holders are compatible with this ISO designation? Compatibility depends on matching the insert form, clearance, tolerance class, attachment, size and thickness; the TPMT110202-PS format fits ISO-standard triangular holder types designed for this size designation. What is the benefit of the 0.2 mm nose radius? A 0.2 mm nose radius provides a compromise between edge strength and surface finish capability, allowing fine finishes on external features while maintaining adequate edge robustness for light interruptions. How many cutting edges are available per insert and what is the plate thickness? The triangular geometry offers three indexing edges per insert and a plate thickness of 2.38 mm, supporting rigidity in typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 AH725 Wendeplatten - Tungaloy
Reliable, ISO‑compliant turning is delivered by the PVD‑coated AH725 carbide grade and the triangular 60° geometry with a 0.2 mm corner radius, providing stable chip control and long tool life; order the TPMT110202 AH725 insert directly via Metav Werkzeuge or ask our consultants for technical guidance. TPMT110202 AH725 — TPMT ISO turning insert for turning (Tungaloy) The TPMT110202 AH725 is an ISO‑standard triangular indexable insert engineered for consistent external and internal turning of steel and stainless steel, offering a universal, breakage‑resistant grade for mixed‑material production. PVD‑coated carbide AH725 for process security Triangular 60° insert with 0.2 mm radius Cylindrical hole with 40°–60° one‑side countersink ISO‑compliant for external and internal turning Stable results across mixed steels and stainless steels The PVD‑coated AH725 grade is designed as a universal, fracture‑resistant carbide that maintains cutting edge integrity across a wide range of steels and stainless steel. This provides predictable tool behaviour where job shops or production lines face frequent material changes. The coating reduces adhesion and improves wear resistance, which translates into fewer interrupted cycles and more consistent part quality. As a result, process planners benefit from higher first‑pass yields and reduced rework. Geometry that delivers repeatable contact and secure clamping The triangular 60° layout, combined with a 0.2 mm corner radius and an 11° clearance angle, creates a stable cutting geometry that reduces vibration and stabilises the cutting edge under varying loads. The cylindrical hole with a one‑side countersink (40°–60°) ensures reliable fastening in compatible toolholders, while the 2.38 mm plate thickness supports secure clamping and positional repeatability. These characteristics reduce indexing errors and support predictable tool life, especially in small‑tool applications where rigidity is limited. Easy integration into ISO tooling systems and sensible inventory planning As an ISO‑standard indexable insert, the component fits into established holder systems when matched by form, clearance angle, tolerance class, fastening method, size and thickness. The typical system setup includes the insert, the appropriate external holder or boring bar, a backing or clamping set, and replacement screws—allowing straightforward spare‑part management and rapid field replacement. Choosing the one‑sided chipbreaker and the AH725 grade supports process stability, which is especially valuable for production environments that prioritise uptime and consistent surface finish. For process‑secure turning with the Tungaloy AH725 grade, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864890 Manufacturer SKU: TUN6864890 SKU: 6864890-Tungaloy Name: TPMT110202 AH725 Tungaloy indexable insert Facts Angle: 60° Corner radius: 0.2 mm Thickness: 2.38 mm Inscribed circle / size: 11 mm Clearance angle: 11° Special features PVD‑coated carbide grade AH725 Triangular insert, ISO‑standard Cylindrical hole with one‑side countersink (40°–60°) One‑sided chipbreaker Suitable for steel and stainless steel Application: Turning FAQ Which materials are suitable for this insert? The TPMT110202 AH725 insert is specified for machining a broad range of steel and stainless steel grades; the AH725 PVD‑coated carbide provides good wear resistance and fracture control for mixed‑material batches. What are the key geometry values to consider? The insert features a 60° included angle, a 0.2 mm corner radius and an 11° clearance angle; these parameters influence surface finish, chip flow and cutting forces when using the TPMT110202 AH725. Is the insert suitable for internal turning and boring operations? Yes—the ISO‑compliant triangular form and the cylindrical hole with a countersink allow mounting in compatible external holders or boring bars for both external and internal turning when the correct holder and clamping kit are selected. How does the chipbreaker affect performance? The one‑sided chipbreaker adapts chip formation to the chosen feed and material, improving chip control and reducing the risk of built‑up edge with the AH725 grade during interrupted or continuous cuts. What are the product identifiers for ordering and stock management? The part is listed as TPMT110202 AH725 with article number 6864890 and manufacturer SKU TUN6864890 (SKU 6864890‑Tungaloy), which can be referenced when checking availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 AT9530 PS Wendeplatten - Tungaloy
High-performance cermet insert with a 0.2 mm corner radius and PS chipbreaker delivers superior surface finish and consistent wear for finishing and light turning of Stahl; order directly via Metav Werkzeuge or request advice from our consultants for optimal holder pairing. TPMT 110202 AT9530 indexable turning insert — coated cermet, PS chipbreaker | Tungaloy A TPMT110202-PS AT9530 indexable insert engineered for finishing and light Drehen operations on Stahl, combining ISO-compliant geometry with a low corner radius for excellent surface quality. Coated cermet grade AT9530 for finishing PS chipbreaker for smooth chips 11° relief angle for reliable cutting Triangular insert with 0.2 mm corner radius Precision and process stability for finishing operations The insert is designed to improve machining stability during finishing and light turning. Its coated cermet grade AT9530 provides a balanced combination of wear resistance and toughness, enabling a uniform wear pattern that supports reproducible component quality. The PS chipbreaker promotes controlled chip formation, which reduces interruptions and contributes to a consistent surface appearance. Compatibility with ISO holders is defined by form, relief angle, tolerance class, fixing method, size and thickness, so the insert integrates into standard tool systems with predictable results. Clear selection criteria and compatibility guidance Selection and mounting are simplified by standardised dimensions and a defined hole design. The insert features a cylindrical hole with a single-side countersink (40°–60°) to suit central clamping systems and ensure secure locating on the seat. Because compatibility depends on geometry and tolerance, the matching holder and clamp must be chosen to correspond to the insert’s 11° relief angle, thickness and form; this approach reduces setup time and avoids misfits. The system concept includes the ISO-compliant insert together with a matched outside holder or boring bar, shim/clamp set and replacement fastening screws when required. Surface quality and economical tool life For finishing passes where surface integrity matters, the small 0.2 mm corner radius helps to maintain tight dimensional tolerance and a fine surface finish while reducing the risk of edge chipping. The coated cermet composition supports light interrupted cuts and sustained finish operations on Stahl by lowering built-up edge and providing stable cutting behaviour. As a result, the insert aids longer in-process life and contributes to lower machining costs through fewer reworks and stable component quality over series production. Contact Metav Werkzeuge for application-specific recommendations and to order Tungaloy TPMT110202-PS AT9530 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 6773748 Manufacturer SKU: TUN6773748 Dealer SKU: 6773748-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications ISO code: 110202 Shape: triangular Size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Hole style: cylindrical hole with single-side countersink 40°–60° Angle: 60° Materials & features Material: Hartmetall Coating/grade: AT9530 (coated cermet) Chipbreaker: PS Application: Drehen (finishing and light turning of Stahl) Compatible system: ISO-compliant insert and matched holder, shim and clamp set FAQ What is the main application of this insert? The TPMT110202-PS AT9530 insert from Tungaloy is intended for finishing and light Drehen operations on Stahl, with emphasis on surface quality and uniform wear. Which chip control does the insert offer? The insert is equipped with a PS chipbreaker that promotes smooth chip formation and supports uninterrupted finishing cuts. How is compatibility with holders determined? Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; matching the holder to these parameters ensures secure clamping of the TPMT110202-PS AT9530. What are the key geometric values to note? The insert has a corner radius of 0.2 mm and a relief angle of 11°, with a triangular form and 11 mm size. What material and grade are recommended for this insert? The insert is made of Hartmetall and uses the coated cermet grade AT9530, optimised for finishing of Stahl. What is the hole and clamping style? The insert features a cylindrical hole with a single-side countersink (40°–60°) designed for central fastening and reliable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 GH730 Wendeplatten - Tungaloy
Take advantage of the GH730 grade's balance of wear resistance and edge stability plus the precise 60° triangular form for consistent turning performance; order directly via Metav Werkzeuge or contact our technical advisers for application support. TPMT110202 GH730 Tungaloy insert — ISO triangular indexable turning insert, 60°, 0.2 mm nose radius The TPMT110202 GH730 is an ISO-format indexable turning insert intended for external and internal turning, combining a cemented carbide substrate with a chipbreaker and a cylindrical clamping hole for secure fixation in compatible toolholders GH730 grade for wear resistance ISO triangular insert, 60° 0.2 mm nose radius for precision Cemented carbide, with clamping hole Consistent cutting performance that reduces process variation The combination of the GH730 cutting grade and a cemented carbide substrate delivers a measured compromise between abrasion resistance and fracture toughness. In production environments where repeatability matters, this balance extends usable edge life and reduces unscheduled insert changes. The 0.2 mm nose radius supports fine-detail turning and repeatable surface finish while the 60° triangular geometry ensures stable seating in ISO-compatible holders. These attributes translate into fewer interruptions and a more consistent cycle time across batches. Secure clamping and straightforward system integration Compatibility with a toolholder depends on form, relief angle, tolerance class, fixing method, size and thickness; this ISO-format insert facilitates straightforward integration into existing turning systems. The cylindrical hole with single-sided countersink (40°–60°) provides reliable clamping and repeatable positional accuracy, while the 2.38 mm plate thickness and standard 11 mm size match common holder designs. Assembling the system requires the insert, a matching outside holder or boring bar, an underlay/shim or clamp set and replacement screws — a practical setup for maintenance planning and spare‑parts provisioning. Material behaviour and edge stability for mixed workloads The Tungaloy grade is engineered to perform across a broad range of steels and alloys by offering stable chip formation and a resilient cutting edge. When machining varied components, selecting a single-sided chipbreaker and the GH730 grade helps maintain surface quality under changing cutting forces. The insert’s geometry and the grade’s properties minimise edge chipping and support predictable tool life, which is particularly valuable for medium-duty turning operations where both durability and finish count. Practical guidance for application and insert selection For best results in external and internal turning, match the chipbreaker and the GH730 sort to the workpiece material and the rigidity of the setup. A more rigid machine and workholding permit higher feed and depth of cut, leveraging the insert’s wear resistance; conversely, less stable arrangements benefit from conservative feeds to protect the cutting edge. The ISO designation and standard dimensions simplify inventory management and reorders, while the TPMT110202 geometry supports a range of turning tasks without the need for frequent retooling Secure consistent turning performance with Tungaloy’s GH730-grade TPMT110202 — contact Metav Werkzeuge for tailored technical advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6821010 Manufacturer SKU: TUN6821010 Internal SKU: 6821010-Tungaloy Item designation: TPMT110202 GH730 Tungaloy insert Facts Angle: 60° Nose radius: 0.2 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Special features Material: cemented carbide Grade/coating: GH730 (Tungaloy grade) Plate form: triangular Hole style: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Intended use: turning ISO format: TPMT110202 (ISO code 110202) FAQ What toolholders are compatible with this insert? Compatibility is determined by the insert’s form, relief angle, tolerance class, fixing method, size and thickness; the TPMT110202 fits holders designed for ISO-format triangular inserts and secures via the cylindrical hole and countersink. Which materials can be machined with this grade? The GH730 grade on the TPMT110202 insert is intended for turning a broad range of steels and similar alloys, offering a balance of wear resistance and toughness for mixed applications. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm nose radius on this indexable insert supports a fine surface finish while retaining edge strength; it is suited to finishing and light-medium turning passes where dimensional accuracy is required. Is the insert suitable for internal turning? Yes — the TPMT110202 insert’s ISO geometry and chipbreaker selection permit use in both external and internal turning operations, provided the holder and setup offer adequate rigidity. What is the exact article number and manufacturer code? The article number is 6821010 and the manufacturer SKU is TUN6821010 for the TPMT110202 GH730 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 GT9530 Wendeplatten - Tungaloy
Achieve consistent finishing and longer tool life by combining the coated cermet GT9530 grade with a 60° triangular geometry and a 0.2 mm corner radius; designed for stable turning conditions. Order the TPMT 110202 GT9530 insert via Metav Werkzeuge or request application advice from our consultants for optimal tool selection. TPMT 110202 GT9530 Tungaloy turning insert — triangular 60°, 0.2 mm radius TPMT 110202 GT9530 is an ISO-format triangular turning insert intended for finishing and light universal turning in stable setups, offering a balance between surface quality and extended tool life. Coated cermet grade GT9530 Triangular 60° form, 0.2 mm corner radius Cylindrical hole with 40°–60° countersink Optimised for finishing and longer life High-precision finishing with a wear-resistant cermet grade The insert is manufactured in a coated cermet grade, GT9530, combining ceramic hardness with metallic toughness to deliver a markedly improved surface finish and longer tool life under steady machining conditions. As an indexable insert, it is particularly suited to operations where consistent dimensional accuracy and reduced frequency of index changes matter. The coating enhances abrasion resistance while maintaining the fine cutting edge required for finishing passes, translating into fewer interruptions and more predictable process windows. ISO compatibility and secure mounting for repeatable results Designed to ISO specifications, the triangular geometry (60°) and the 0.2 mm corner radius define the cutting engagement and profile. The insert features an 11° relief angle and a cylindrical hole with a single-side countersink (40°–60°) which ensures reliable clamping and repeatable seating in compatible turning holders. Compatibility is determined by plate form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters with the machine-side holder and underlay yields secure fixation and maintained cutting geometry over multiple indexings. Operational benefits: process stability, surface quality, and application scope With a one-sided chipbreaker and the GT9530 composition, the insert is optimised for finishing and light universal turning, especially when stable workholding and machine rigidity are present. The combination supports higher productivity through fewer interruptions and consistent workpiece surfaces, while the robust grade reduces flank wear during extended runs. Recommended use cases include external and internal turning of Stahl, where a high-quality finish and predictable tool life are priorities. For specific material mixes, chipbreaker style and holder selection should be matched to the machining setup to secure the intended results. For further technical clarification, Metav Werkzeuge's consultants are available to advise on holder selection and cutting parameters. Contact Metav Werkzeuge for ordering or tailored application support on Tungaloy TPMT 110202 GT9530 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt expert assistance Technical Data Article number: 6713644 SKU: 6713644-Tungaloy Manufacturer SKU: TUN6713644 Model series: ISO turning indexable inserts Designation: TPMT110202 GT9530 Tungaloy insert Facts Geometry angle: 60° Corner radius: 0.2 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Countersink: 40°–60° Special features Coated cermet grade GT9530 One-sided chipbreaker Triangular plate form Cylindrical hole with single-side countersink ISO-compatible turning insert Application: turning; finishing to light universal turning; suited for Stahl FAQ What materials is this insert suitable for? The TPMT 110202 GT9530 insert from Tungaloy is engineered primarily for use on Stahl in finishing and light universal turning, delivering improved surface quality and wear resistance due to the coated cermet composition. Which holder type and clamping are required? Compatibility depends on ISO holder form, relief angle, tolerance class, fastening method, size and plate thickness; the TPMT 110202 features a cylindrical hole with a 40°–60° countersink to ensure secure clamping in matching ISO turning holders. What surface quality can be expected with this grade? Thanks to the GT9530 coated cermet grade and the fine 0.2 mm corner radius, the insert provides a superior surface finish on finishing passes when used in stable machining conditions. Is the insert suitable for heavy roughing operations? The TPMT 110202 GT9530 is optimised for finishing to light universal turning; it is not intended as a primary choice for heavy roughing where robust, high-feed geometries are required. How should the chipbreaker be selected for different applications? Selection of chipbreaker style should be aligned with workpiece material, stability of the setup and desired chip form; the one-sided chipbreaker on this insert supports controlled chips during finishing on Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance and ISO compatibility for predictable finishing results and extended tool life; the triangular form with a 0.2 mm corner radius delivers a fine surface while the 11° relief supports secure clamping and dimensional stability — order directly via Metav Werkzeuge or contact the consultants for guidance. TPMT 110202 GT9530 — Tungaloy Turning Insert for Finishing The TPMT110202 GT9530 is an ISO triangular turning insert in coated cermet designed for finishing and light general-purpose turning of steel. Coated cermet grade GT9530 Triangular ISO form, 11° relief 0.2 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Improved surface quality with longer tool life The TPMT110202 combines a coated cermet grade GT9530 with a fine 0.2 mm corner radius to deliver a fine surface finish and reduced wear in stable machining conditions. The cermet coating enhances abrasion resistance and helps maintain edge geometry, which results in longer tool life for finishing passes. This focused advantage reduces interruptions for insert changes and supports a smoother production flow with predictable outcomes. Straightforward integration into ISO tool systems Designed to the ISO standard, the triangular form and 11° relief ensure compatibility with common external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, clamping method, size and plate thickness. The insert’s cylindrical hole with a single-sided countersink (40°–60°) simplifies secure clamping and repeatable positioning. The result is efficient assembly, reliable repeatability and fewer setup adjustments during batch production. Best use cases and process considerations for steel turning Select this insert with a matching single-sided chipbreaker and a stable machine–tool–workpiece set-up for finishing and light universal turning of steel, where surface quality and consistent performance are priorities. The triangular geometry provides three usable cutting edges, improving economy per insert, while the coated cermet composition supports consistent performance under controlled conditions. For advice on matching chipbreakers or optimising parameters, Metav Werkzeuge’s technical team can provide tailored recommendations. For precise finishing with Tungaloy cermet inserts, contact Metav Werkzeuge to confirm holder compatibility and to order the TPMT110202 GT9530 — email info@metav-werkzeuge.com or call +49 2822 7131930 for a prompt consultation Technical data Article number: 6998369 Manufacturer SKU: TUN6998369 Retail SKU: 6998369-Tungaloy ISO designation: TPMT110202 Core specifications Corner radius: 0.2 mm Thickness: 2.38 mm Inscribed circle / size: 11 mm Relief angle: 11° Included/wedge angle: 60° Features and materials Coating / grade: GT9530 (coated cermet) Base material: cemented carbide Plate form: triangular Chipbreaker: single-sided Hole: with cylindrical hole and one-sided countersink (40°–60°) Typical application: external and internal turning, finishing to light universal turning of steel FAQ Which materials is this insert suitable for? The TPMT110202 GT9530 from Tungaloy is optimised as a wear-resistant coated cermet for finishing and light universal turning primarily on steel, delivering good surface quality and extended tool life when used under stable conditions. How does the insert contribute to a better surface finish? The combination of the GT9530 coating and a 0.2 mm corner radius preserves edge geometry and reduces abrasion at the cutting edge, which helps the insert produce a finer surface finish in finishing passes. Which holders and clamping systems are compatible? Compatibility follows ISO conventions: the triangular form, 11° relief, tolerance class, clamping type, size and thickness determine compatibility with external holders or boring bars; ensure the holder matches the ISO plate dimensions and the cylindrical hole/countersink design. When should a single-sided chipbreaker be chosen? A single-sided chipbreaker is recommended for finishing and stable cutting conditions to promote controlled chip formation and consistent surface quality; pairing the right chipbreaker with the TPMT110202 GT9530 helps achieve reliable, repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 NS9530 Wendeplatten - Tungaloy
Product data conflict: one entry lists "Hartmetall" (cemented carbide) while another specifies an uncoated cermet; please verify the correct cutting-material designation to ensure accuracy and consistency in the database, as discrepancies in material specifications can lead to potential issues in manufacturing processes, tool performance, and overall product quality, making it essential to confirm whether the material in question is indeed cemented carbide or an uncoated cermet to avoid misunderstandings or errors in production planning, procurement, or technical documentation, which could ultimately impact operational efficiency, cost-effectiveness, and customer satisfaction if not addressed promptly and accurately.
TPMT 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and low cutting forces combined with ISO compatibility and easy integration into standard holders; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 110202 NS9530 — ISO triangular turning insert for finishing (Tungaloy) The TPMT110202 NS9530 is an ISO‑standard triangular turning insert designed for finishing steel, offering a sharp cutting edge, low cutting forces and excellent surface quality for continuous cuts. ISO triangular insert, 60° geometry Uncoated cermet NS9530 finishing grade Sharp edge for superior surface finish 0.2 mm corner radius, 11° clearance Consistent finishing performance for steel components The insert is engineered as a finishing grade for steel, optimising surface integrity while keeping cutting forces low. Its uncoated cermet composition provides a stable, sharp cutting edge that reduces rubbing and heat build‑up during continuous turning. As a result, the component surface requires less post‑processing, improving throughput and lowering overall machining time. The design supports consistent dimensional control when small depths of cut and fine feeds are used, making it suitable for precision external and internal turning operations. Reliable geometry and ISO compatibility for easy tool setup With a 60° triangular form, an 11° clearance angle and a corner radius of 0.2 mm, the insert matches ISO mounting standards and fits common external holders and boring bars when the holder form, tolerance class and thickness align. The insert includes a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and repeatable seating. Specifying ISO‑standard tooling components reduces setup time and helps standardise tool inventories across machine parks, supporting predictable cycle times and simpler tool management. Practical benefits and application guidance The single‑sided chipbreaker and sharp edge geometry favour continuous cuts and small depth passes typical of finishing cycles; the NS9530 grade is chosen for low cutting forces and high surface finish on steel. For roughing to finishing transitions, the insert offers predictable wear behaviour, helping to plan tool changes and maintain process stability. When pairing with appropriate holders, operators should select feeds and speeds aligned with finishing parameters to exploit the material’s low cutting resistance and achieve the targeted surface quality. Discuss application requirements and availability with Metav Werkzeuge's technical team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998531 SKU: 6998531-Tungaloy Manufacturer article number: TUN6998531 Model series: ISO-Drehwendeschneidplatten Facts Geometry: 60° Corner radius: 0.2 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 11 Special features Material: Hartmetall Schneidstofftyp: uncoated cermet (NS9530) Plate form: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TPMT110202 NS9530 insert is designed primarily for steel finishing; the uncoated cermet NS9530 grade provides low cutting forces and high surface quality on various steels. Will this ISO insert fit existing toolholders? Compatibility depends on holder form, free angle, tolerance class, fastening and thickness; the ISO‑standard geometry of the TPMT110202 facilitates use in standard triangular holders when those parameters match. What is the corner radius and why does it matter? The corner radius is 0.2 mm, which helps produce fine surface finishes and reduces cutting forces during finishing passes on steel components. Can the insert be used for internal turning? Yes, the insert’s geometry and chipbreaker suit both external and internal turning when mounted in the correct boring bar or holder designed for triangular ISO inserts. How is the insert clamped? The insert includes a cylindrical hole with a single‑side countersink (40°–60°) for secure, repeatable clamping in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide and precise geometry for longer tool life and consistent part quality; the ISO format ensures straightforward replacement in industry‑standard holders. Order the insert directly via Metav Werkzeuge or consult our specialists if clarification is required. TPMT 110202 T6215 ISO turning insert — Tungaloy, CVD‑coated carbide, 0.2 mm radius TPMT 110202 T6215 is an ISO‑standard triangular turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted conditions. ISO triangular insert TPMT 110202 T6215 CVD‑coated carbide, wear‑resistant Designed for stainless steel turning 0.2 mm corner radius, 11° relief Robust coating and grade for extended running times The insert combines a CVD‑coated surface with a wear‑resistant carbide substrate and the T6215 grade to deliver reliable performance when machining stainless steels. The coating reduces flank and crater wear in continuous cutting and under modest interruptions, which translates into longer tool life and fewer indexings. For production environments where repeatability and reduced tool‑change downtime matter, this arrangement offers a measurable efficiency gain and helps to maintain consistent component quality. Geometry that balances surface finish and edge strength A 0.2 mm corner radius offers an advantageous compromise between edge robustness and workpiece finish, reducing the risk of premature chipping while supporting a fine surface texture on the workpiece. The 11° relief angle lowers rubbing on the flank, improving cutting action and heat evacuation at the edge. The triangular plate form provides three usable cutting edges per index, while a plate thickness of 2.38 mm contributes to mechanical stability. The centre cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping in compatible holders and simplifies repeatable positioning during indexings. System compatibility and recommended machining uses The insert is supplied in the ISO turning insert system and is intended to be used with a suitable external holder or boring bar together with the appropriate shim/locking set and fastening screws. Typical applications include external turning and internal boring where stainless steels are the workpiece material and machining conditions remain stable or encounter occasional light interruptions. Selection of an appropriate chipbreaker and the correct grade for the workpiece and machine stability is essential; matching the insert geometry to the holder (form, clearance angle, tolerance class, fastening, size and thickness) ensures secure mounting and repeatable results. For specification guidance on Tungaloy turning solutions or to confirm suitability for a particular stainless steel application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist. Technical Data Article number: 6903138 SKU: 6903138-Tungaloy Manufacturer SKU: TUN6903138 Designation: TPMT110202 T6215 Tungaloy turning insert Facts Plate size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included: with hole Geometry angle: 60° Special features CVD‑coated carbide Grade T6215 (wear‑resistant) Triangular plate form Single‑sided chipbreaker ISO turning insert series Cylindrical hole with one‑sided countersink (40°–60°) Suitable for stainless steels, stable to lightly interrupted cutting FAQ What materials is this insert best suited for? The TPMT 110202 T6215 insert is formulated for machining stainless steels; the T6215 CVD coating and carbide substrate provide wear resistance for stable to lightly interrupted cutting. How many cutting edges are available per insert? The triangular plate form supplies three usable cutting edges per insert; each indexing restores the original geometry for consistent cutting. Does the insert require a specific holder type? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the TPMT 110202 fits standard ISO turning holders designed for 11 mm triangular plates. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius increases edge strength compared with a smaller radius while still supporting a good surface finish on stainless steel components. Is the centre hole compatible with common clamping systems? Yes, the insert features a cylindrical hole with a one‑sided countersink (40°–60°), designed for secure clamping in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 T9215 Wendeplatten - Tungaloy
Take advantage of a high-performance, CVD-coated carbide grade that balances wear resistance and fracture toughness for productive turning of medium steels; the triangular geometry with a 0.2 mm corner radius and an 11° clearance angle ensures reliable surface quality and repeatable results, while the standard ISO fit supports straightforward holder compatibility — order via Metav Werkzeuge or contact our consultants for application support. TPMT 110202 T9215 turning insert by Tungaloy — triangular CVD-coated carbide for medium steel turning TPMT110202 T9215 is an ISO-format turning insert designed for external and internal turning of medium steels, offering a balance of wear resistance and toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Triangular insert, size 11 designation 11° clearance angle for reliable cutting 0.2 mm corner radius for fine profiling Consistent productivity for medium steel machining The CVD-coated carbide of grade T9215 is formulated as a first choice for medium steel machining, combining high wear resistance with good fracture toughness. This chemistry and coating strategy reduce flank and crater wear, which leads to longer tool life under continuous production conditions. For users seeking measurable uptime gains, the insert’s specification supports fewer indexings and predictable tool-change intervals, translating into improved throughput and lower process interruptions. Secure clamping and ISO compatibility for versatile tooling systems Designed to the ISO standard, compatibility with a clamping system depends on form, clearance angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°), enabling positive and repeatable clamping in many standard holders and boring bars. When combined with a matching shim and clamp set and the correct holder geometry, the system yields rigid support that stabilises cut forces and enhances dimensional repeatability in batch production. Geometry and chip control for surface quality The triangular shape with a 60° included angle delivers three usable cutting edges per index, while the 0.2 mm corner radius is suited to achieving fine surface finishes and accurate profiles on workpieces. The single-sided chipbreaker directs chips predictably for medium steel, reducing the risk of surface marking and improving evacuation in long turning operations. Together, these features provide controlled material removal and consistent part quality across runs. Practical application guidance and system considerations This ISO insert is recommended for both external and internal turning; selection of the specific chipbreaker and T9215 grade should be aligned with the workpiece material, depth of cut and machine-tool rigidity. The plate thickness of 2.38 mm and size designation 11 are factors when matching to holders — ensuring the correct tolerance class and fastening method avoids slippage and preserves edge life. For interrupted cuts or unstable setups, choosing a tougher grade or adjusting feed and speed will increase process reliability without sacrificing productivity. For tailored advice on integrating the TPMT110202 T9215 turning insert into existing tooling systems or for immediate availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-oriented recommendations and fast supply. Technical data Article number: 6774042 SKU: 6774042-Tungaloy Manufacturer article number: TUN6774042 Model series: ISO turning inserts Material: carbide Coating: CVD-coated Grade: T9215 Application: turning Facts Size designation: 11 Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Hole: with hole Special features Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical system: insert + external holder or boring bar + shim/clamp + replacement screws FAQ What materials is this insert best suited for? The TPMT110202 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness for continuous to lightly interrupted cuts. How does the clamping hole affect holder choice? The cylindrical hole with a one-sided countersink (40°–60°) on the TPMT110202 supports secure clamping in many ISO-compatible holders and helps maintain repeatable seating under production loads. How many cutting edges are available per insert? The triangular geometry with a 60° included angle provides three indexable cutting edges, enabling efficient edge utilisation and predictable economics per insert. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius offers a good compromise between profile accuracy and surface finish on medium steels, particularly when paired with the single-sided chipbreaker for consistent chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225, the 60° triangular geometry and the precise 0.2 mm corner radius for reliable medium-to-heavy Stahl turning; order the insert directly via Metav Werkzeuge or consult the technical advisors for holder compatibility. TPMT 110202 T9225 Turning Insert (ISO, triangular, 60°) – Tungaloy TPMT110202 T9225 is an ISO‑normed triangular turning insert designed for medium to heavy Stahl machining and universal turning applications. CVD-coated carbide T9225 for Stahl 60° triangular insert for external and internal turning 0.2 mm corner radius for fine contour control Cylindrical hole with 40°–60° countersink for secure clamping Consistent performance where cuts vary The CVD-coated carbide composition of this indexable insert combines wear resistance with the toughness required for interrupted or variable engagement conditions. As a robust universal grade, T9225 is formulated to maintain edge stability during mixed feeds and varying depths of cut, which reduces unplanned tool changes and supports a steady production flow. The benefit is fewer interruptions on the shop floor and more predictable tool life when machining Stahl components. Accurate geometry for repeatable part quality With a 60° included angle and 0.2 mm corner radius, the triangular design delivers controlled cutting action and predictable corner formation on turned parts. The small radius improves edge strength while still enabling precise contouring; this helps to achieve consistent dimensional accuracy and surface finish on shafts and bores. Compatibility with ISO holders ensures the insert seats correctly, provided holder form, clearance, tolerance class, fastening and thickness are matched. Secure clamping and simple integration into existing systems The insert features a cylindrical hole plus a one-sided countersink (40°–60°), facilitating reliable clamping in a wide range of standard external holders or boring bars. Because ISO compatibility depends on form, free angle, tolerance class, fastening and size, this insert can be integrated into established tool systems without redesigning the clamping interface. The practical result is straightforward retrofit into production lines and reduced setup time. Practical grade choice for shop-floor reliability The cutting grade is optimised for stable chip formation and long edge life in medium-to-heavy Stahl turning. The single-sided chipbreaker suits general turning tasks where control of chip flow is necessary but applications may present light interruptions. Selecting this insert reduces the need for multiple specialised grades and supports a more economical tooling strategy without compromising on productivity. For dependable medium-to-heavy Stahl turning with the Tungaloy T9225 grade, contact Metav Werkzeuge for availability or technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781210 SKU: 6781210-Tungaloy Manufacturer SKU: TUN6781210 Model series: ISO turning indexable inserts Product designation: TPMT110202 T9225 Tungaloy insert Application: Turning Dimensions & angles Size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Hole: with hole Countersink angle range: 40°–60° Insert form: triangular Materials & special features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink Suitable for: medium to heavy Stahl machining ISO-compatible insert system FAQ What materials is this insert intended for? The TPMT110202 T9225 insert from Tungaloy is intended primarily for medium-to-heavy Stahl machining and is optimised for processes where toughness and stable chip control are required. What does the T9225 designation indicate? T9225 denotes a CVD-coated carbide grade tuned for robustness and long edge life under variable cutting conditions; the Tungaloy grade balances wear resistance with impact resistance for turning Stahl. How is the insert clamped into the holder? The TPMT110202 uses a cylindrical mounting hole with a one-sided countersink (40°–60°), enabling secure clamping in compatible ISO external holders or boring bars when shape, clearance, tolerance, fastening and thickness match. Which applications are best suited to this insert? This insert is well suited to external and internal turning operations, from general profiling to medium-to-heavy roughing where intermittent cuts or changing engagement favour a tougher grade. What are the key geometry values to check for compatibility? Check the 11° clearance angle, 60° included angle, 2.38 mm thickness and 0.2 mm corner radius when selecting a matching holder or adapter for TPMT110202. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, the PS chipbreaker for consistent chip control and the compact 0.4 mm corner radius for precise edge formation. Order the insert directly via Metav Werkzeuge or request advice from our consultants for process integration and holder compatibility. TPMT 110204 AH120 – Turning Insert TPMT110204-PS, 0.4 mm Radius (Tungaloy) The TPMT110204-PS AH120 is an ISO-standard triangular turning insert designed for external and internal turning, offering a PVD-coated carbide grade and a PS chipbreaker for secure, repeatable machining. PVD-coated carbide grade AH120 PS chipbreaker for stable chip control 11° clearance angle for a sharp cutting edge Triangular ISO plate with 60° included angle Boosted productivity through consistent edge life The PVD-coated carbide grade AH120 delivers a balance of wear resistance and fracture toughness that supports steady production. The coating reduces flank wear and helps maintain a sharp edge, while the robust substrate tolerates intermittent shocks during turning. Taken together, these characteristics increase useful tool life and reduce unplanned tool changes, which directly improves machine uptime and workflow efficiency. For applications where repeatability and minimal downtime matter, this grade is a pragmatic choice. Predictable chip control for improved surface finish The integrated PS chipbreaker has been developed for controlled chip formation in a broad range of turning tasks. By producing short, manageable chips the insert reduces the risk of workpiece damage and machine interference, contributing to a more consistent surface quality. The modest corner radius of 0.4 mm supports a precise cutting edge that lowers cutting forces and helps achieve the required dimensional tolerances, particularly on softer to medium-strength steels and similar materials suitable for turning. Simple integration and mechanical compatibility The insert follows ISO geometry for triangular plates with a 60° included angle and is supplied with a central hole featuring a cylindrical bore and a single-side countersink (40°–60°) for secure clamping. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the listed dimensions — 11 mm plate size, 2.38 mm thickness and 11° clearance — allow straightforward selection of matching external holders or boring bars. This makes retrofitting into existing tool systems uncomplicated and keeps inventory handling efficient. Process security and material scope Thanks to its combination of PVD coating and carbide substrate, the insert is engineered for applications that require a sharp cutting edge and robust process security. The specification is aimed at turning operations where a compromise between high wear resistance and resistance to edge chipping is required. Where stable cutting conditions and predictable performance are priorities, this insert supports reproducible machining results and consistent component quality. Contact Metav Werkzeuge for tailored technical advice on integrating the Tungaloy TPMT110204-PS AH120 into existing toolholders and for assistance with order planning; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6836859 Manufacturer SKU: TUN6836859 SKU: 6836859-Tungaloy Facts Radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate size: 11 mm Thickness: 2.38 mm Special features Carbide substrate PVD coating, grade AH120 PS chipbreaker Triangular plate, ISO designation TPMT110204-PS Central hole: cylindrical with single-side countersink (40°–60°) Intended use: turning (external and internal) FAQ What materials is this insert designed to machine? The insert is specified for turning operations and, with its PVD-coated AH120 grade, is suited to a wide range of workpiece materials where a balance of wear resistance and edge strength is required, notably common steels and similar alloys. How does the PS chipbreaker affect machining? The PS chipbreaker produces short, controllable chips that reduce entanglement and aid consistent surface finishes; this behaviour supports safer, more predictable turning cycles with fewer interruptions. How is compatibility with a holder determined? Compatibility is decided by the insert geometry and mounting: form, clearance angle, tolerance class, fastening method, size (11 mm) and thickness (2.38 mm) must match the chosen external holder or boring bar. Is the central hole compatible with standard clamping systems? The plate features a cylindrical hole with a single-side countersink (40°–60°) to suit common clamping designs for ISO triangular turning inserts; this enables secure seating and repeatable positioning. What identification should be used when ordering or requesting advice? Use the designation TPMT110204-PS AH120 and the article number 6836859 (manufacturer SKU TUN6836859) when contacting suppliers or consultants to ensure accurate identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of sharp-edge performance, reliable chip control and straightforward holder compatibility for efficient rostfreier Stahl turning. Order the insert directly via Metav Werkzeuge or consult the technical team for holder matching and process parameter advice. TPMT110204-PS AH6225 — ISO triangular turning insert, PVD-coated carbide, 0.4 mm corner radius (Tungaloy) The TPMT110204-PS AH6225 is a triangular ISO turning insert engineered for external and internal turning applications, optimised for machining rostfreier Stahl with a balanced mix of edge sharpness and stability. ISO triangular insert 110204 PVD-coated carbide AH6225 Sharp, stable cutting edge for rostfreier Stahl Cylindrical hole with single-sided countersink 40°–60° Consistent performance from a PVD-coated carbide grade The PVD-coated carbide grade AH6225 is formulated as a universal option for machining rostfreier Stahl, delivering a sharp cutting edge with enhanced wear resistance under varying conditions. The coating supports a stable cutting geometry at medium cut depths, which results in consistent surface quality and predictable tool life. Compatibility with an ISO toolholder is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; this system-based approach ensures reliable clamping and repeatable performance across production batches. Geometry and chip control that improve process security The triangular shape combined with a 0.4 mm corner radius and 11° clearance provides a compromise between edge strength and surface finish, suitable for general turning operations. The integrated PS chipbreaker promotes regular chip formation for external and internal turning, reducing the risk of entanglement and enabling stable cutting under interrupted or variable feed conditions. The insert’s cylindrical hole with a single-sided countersink (40°–60°) secures the part in the holder and facilitates simple replacement using standard clamping kits, supporting short tool-change times and higher machine uptime. Practical integration for workshop productivity Selection of the correct chipbreaker and grade for the workpiece and machining stability is central to process efficiency; matching the TPMT110204-PS AH6225 with a suitable outer holder or boring bar, plus the correct shim and screw set, creates a complete system for productive turning. Material-specific advantages include good surface finish on rostfreier Stahl and robust edge retention during medium machining. For application advice and holder compatibility, Metav Werkzeuge’s technical consultants are available to supply recommended clamping sets and cutting data to accelerate process setup and minimise trial cuts. Contact Metav Werkzeuge for tailored advice on Tungaloy turning solutions — specify TPMT110204-PS AH6225 (SKU TUN6831232) for assistance with holder selection and machining parameters Technical Data Article number: 6831232 Manufacturer SKU: TUN6831232 SKU: 6831232-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: TPMT110204-PS ISO code: 110204 Grade: AH6225 Corner radius: 0.4 mm Thickness: 2.38 mm Size: 11 mm Clearance angle: 11° Included hole: with hole Special features PVD-coated carbide grade for versatile rostfreier Stahl machining Triangular plate form Cylindrical hole with single-sided countersink (40°–60°) Chipbreaker type PS Suitable for external and internal turning System components: insert, compatible outer holder or boring bar, shim/clamp set and replacement screws FAQ What applications suit this insert best? The TPMT110204-PS AH6225 is designed for external and internal turning, particularly where a balance of edge sharpness and stability is required for rostfreier Stahl. Which chipbreaker is fitted and what is its benefit? This insert features the PS chipbreaker, which promotes controllable chip formation and improves process stability during medium machining operations. How does the corner radius affect performance? A 0.4 mm corner radius increases edge strength compared with a smaller radius while still allowing acceptable surface finish, making it a versatile choice for varied turning tasks. What should be considered for toolholder compatibility? Compatibility is defined by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the selected holder ensures secure clamping and repeatable accuracy for the TPMT110204-PS. Is the grade suitable for varying machining conditions? Yes, the AH6225 PVD-coated carbide grade is formulated to deliver reliable cutting-edge performance under changing cutting conditions and moderate cutting depths. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances edge sharpness and toughness, combined with a compact triangular geometry for reliable external and internal turning; order via Metav Werkzeuge or consult our specialists for tailored advice. TPMT110204 AH6225 TPMT 110204 Turning Insert by Tungaloy — PVD-coated carbide, 11° relief The TPMT110204 AH6225 is an ISO-standard turning insert designed for external and internal turning, providing a balance of cutting-edge sharpness and durability for stainless steels. PVD-coated carbide for stainless steel 11° clearance angle for stable cutting 0.4 mm corner radius for versatile finishing Triangular ISO insert with central hole Consistent performance with PVD-coated carbide for stainless steel The AH6225 grade is a PVD-coated carbide developed to deliver a sharp, stable cutting edge across a wide range of conditions. For machining stainless steels, a coating applied by physical vapour deposition enhances wear resistance and heat management, which helps to maintain edge geometry during interrupted cuts or variable feeds. This results in predictable tool life and fewer unscheduled insert changes, supporting higher machine utilisation and reduced process variability. Geometry that improves surface finish and tool life A 0.4 mm corner radius combined with a 11° clearance angle reduces cutting forces while preserving part integrity, making the insert suitable for finishing and light to medium roughing operations. The triangular shape provides three effective cutting corners per indexable insert, which improves cost efficiency per edge. The central mounting hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures secure clamping in standard ISO-compatible holders, contributing to stable cutting conditions and consistent surface quality. ISO compatibility and practical system setup As an ISO-standard turning insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert integrates into a system comprising a matching external holder or boring bar, a locating shim or clamp set and the appropriate fastening screw. With a single-sided chipbreaker and medium plate thickness, the cutting grade and chipbreaker selection should be matched to workpiece stability and machining strategy to achieve efficient chip control and minimise manual rework. Operational benefits and process reliability on the shop floor Using an insert graded for versatility leads to steady, repeatable results: fewer interruptions, consistent part finish and simplified tool inventories. The combination of a coated cemented carbide substrate and an optimised chip control design supports moderate feeds and varied cutting conditions typical in subcontract and batch production. For complex setups, pairing the insert with a robust holder and a controlled approach to cutting data delivers improved uptime and measurable cost efficiency across component runs. Contact Metav Werkzeuge for personalised advice on Tungaloy PVD-coated inserts and to discuss the best indexable solution for specific stainless steel turning tasks via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829889 Manufacturer SKU: TUN6829889 Label/SKU: 6829889-Tungaloy Grade: AH6225 (PVD-coated carbide) Material: Carbide Numeric data Corner radius: 0.4 mm Relief/clearance angle: 11° Insert size: 11 mm Thickness: 2.38 mm Included angle: 60° Design and features Triangular insert geometry Central hole with cylindrical bore and single-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning Optimised for stainless steels FAQ What materials is this insert intended for? The AH6225 grade of the TPMT110204 insert is intended primarily for stainless steels, offering a balance of edge sharpness and wear resistance for medium machining tasks. How does the 11° clearance angle affect cutting? An 11° clearance angle on the TPMT110204 reduces rubbing on the flank face, improving tool life and surface finish when paired with appropriate feeds and speeds. Is the TPMT110204 compatible with standard ISO holders? Yes, the TPMT110204 is an ISO-standard turning insert; compatibility depends on the holder’s form, tolerance class, fastening method, size and thickness. What chip control can be expected from this insert? Equipped with a single-sided chipbreaker, this insert provides effective chip control in many turning scenarios when the grade and cut parameters are matched to workpiece stability. How many usable cutting edges does the insert offer? The triangular shape gives multiple indexable cutting corners, increasing usable edges per insert and improving cost efficiency per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH6225 grade, a 60° triangular geometry and a 0.4 mm corner radius for reliable chip control and consistent edge stability; order directly via Metav Werkzeuge or consult our technical team for tailored application advice. TPMT110204 AH6225 Tungaloy indexable insert for Turning — 60° triangular, 0.4 mm radius TPMT110204 AH6225 is an ISO-compliant triangular indexable insert engineered for turning applications, offering a sharp yet stable cutting edge optimised for rostfreier Stahl and variable machining conditions. ISO triangular 60° insert PVD-coated carbide grade AH6225 0.4 mm corner radius for fine detail With hole and single-sided countersink Increased process reliability for rostfreier Stahl The PVD-coated carbide and AH6225 grade deliver a convincing balance between edge sharpness and wear resistance, specifically developed for machining rostfreier Stahl under medium cutting conditions. The coating reduces built-up edge and improves thermal stability, which results in more consistent part quality and fewer unscheduled tool changes. For shops aiming to reduce cycle-time variation, the insert’s geometry supports predictable tool life and steady surface finish, making it suitable for batch production and mixed-lot machining. Predictable clamping and insertion for fast changeovers The insert’s ISO designation 110204 and standard triangular form ensure straightforward compatibility with a wide range of ISO holders. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°), allowing secure fastening and repeatable seating. Because compatibility is determined by form, relief angle, tolerance class, fastening style, size and thickness, the standardised design reduces setup time and minimises alignment errors when replacing inserts, supporting higher machine utilisation and lower rework rates. Precision detail and chip control for everyday turning A 0.4 mm corner radius combined with a single-sided chipbreaker enables controlled chip formation and reliable cutting forces in typical turning operations. The moderate radius supports fine-detail work without sacrificing edge robustness, while the chipbreaker is optimised for consistent chip evacuation in external and internal turning. For engineers seeking a versatile cutting solution, the insert’s balance of geometry and grade provides effective performance across a range of feeds and speeds, enhancing productivity with fewer tool interventions. Contact Metav Werkzeuge for tailored recommendations on application parameters and holder compatibility or request a machining consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6831384 SKU: 6831384-Tungaloy Manufacturer SKU: TUN6831384 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core specifications Cutting angle: 60° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 11 mm Relief angle: 11° ISO designation: 110204 Features & applications Triangular plate form Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) PVD-coated carbide, grade AH6225 Intended use: Turning ISO-compliant insert Compatibility: determined by form, relief angle, tolerance, fastening, size, thickness FAQ Which materials is this insert best suited for? The TPMT110204 AH6225 insert is designed primarily for rostfreier Stahl; the AH6225 grade and PVD coating provide improved wear resistance and reduced built-up edge when turning stainless alloys. Is the insert suitable for external and internal turning? Yes. The insert’s triangular form and single-sided chipbreaker support both external and internal turning operations, with secure fastening via the cylindrical hole and countersink. How is the insert fixed to a holder? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°); correct seating is ensured when using compatible ISO holders that match form, clearance angle, tolerance and thickness. What kind of machining performance can be expected? Expect stable cutting behaviour at medium machining parameters: the combination of AH6225 and PVD coating delivers consistent surface finish and predictable tool life under changing conditions. Can the insert be used for finishing passes? The 0.4 mm corner radius supports finer finishes while retaining edge stability, making the insert suitable for many finishing and semi-finishing tasks in turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6235 PS Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade (AH6235) and a chipbreaker PS designed for interrupted cuts: the result is stable chip control and increased reliability when machining stainless steel. Order the insert via Metav Werkzeuge or contact the consultants for tailored tooling advice. TPMT110204-PS AH6235 ISO triangular turning insert — PVD-coated carbide for turning The TPMT110204-PS AH6235 is an ISO triangular turning insert engineered for external and internal turning applications, offering a tough grade for stainless steel and operations prone to built-up edge or breakouts. PVD-coated carbide grade AH6235 Optimised for stainless steel and interrupted cuts 0.4 mm corner radius for precise profiling ISO triangular insert with 11° clearance Reliable cutting in stainless steel and interrupted operations The insert combines a PVD-coated carbide substrate with the AH6235 grade to provide enhanced toughness for machining stainless steel and similar alloys. This composition reduces the risk of chipping under interrupted cuts and offers more consistent flank wear, which supports longer tool life in demanding sequences. The chipbreaker PS is tuned to promote controlled chip formation, simplifying chip evacuation and lowering the likelihood of surface damage during plunge or entry cuts. Precision geometry for repeatable profiles and tool life A 0.4 mm corner radius and defined relief geometry with 11° clearance produce repeatable profiles and stable cutting forces, which benefits both part accuracy and insert longevity. The triangular form factor adheres to ISO standards, ensuring predictable seating and interchangeability with compatible external holders or boring bars. A 2.38 mm plate thickness contributes to rigidity, reducing vibration and improving surface finish on the machined component. Practical integration and mounting details for production systems The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match common clamping systems; compatibility depends on the holder’s form, tolerance class, fastening and size. Using the correct holder, underlay and clamping set ensures the cutting edge remains stable under load, enabling productive turning cycles. For workshop integration, the insert’s ISO designation simplifies inventory control and replacement routines while maintaining process stability. For machining tasks that demand dependable performance in stainless steels, rely on the Tungaloy TPMT110204-PS AH6235 — contact Metav Werkzeuge for application support and to discuss the best holder and operating parameters at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6890203 Manufacturer SKU: TUN6890203 Metav SKU: 6890203-Tungaloy Facts Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 2.38 mm Insert size: 11 mm Included angle: 60° Special features PVD-coated carbide (AH6235) Chipbreaker: PS Triangular ISO insert (TPMT110204-PS) Cylindrical hole + single-sided countersink 40°–60° Suitable for external and internal turning Designed for stainless steel and interrupted cuts FAQ Is this insert suitable for interrupted cuts in stainless steel? Yes. The TPMT110204-PS AH6235 uses a tougher AH6235 grade and a chipbreaker PS, which are specifically designed to reduce chipping during interrupted cuts in stainless steel. What is the corner radius and how does it affect the profile? The insert has a 0.4 mm corner radius; this provides a balance between accurate profiling and edge strength, improving surface finish while maintaining robustness under load. Which clamping systems are compatible with this insert? Compatibility depends on holder form, tolerance class and fastening; the TPMT110204-PS fits ISO-standard triangular clamping systems and requires a matching underlay, clamping set and screw. What advantages does the PVD coating bring? The PVD layer increases wear resistance and supports higher cutting temperatures, extending tool life and improving process stability when machining stainless steels. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6890203; manufacturer SKU TUN6890203; Metav SKU 6890203-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6235 Wendeplatten - Tungaloy
Benefit from a tough, PVD-coated grade that extends tool life in challenging cuts and a compact triangular geometry that ensures secure clamping and repeatable positioning; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. TPMT 110204 AH6235 triangular turning insert — Tungaloy, PVD-coated carbide, 60° The TPMT110204 AH6235 is an ISO-format triangular turning insert optimised for turning operations on stainless steels and engineered for interrupted cuts and applications with increased risk of chipping. PVD-coated carbide AH6235 for stainless steels Triangular ISO insert, 60° cutting angle 11° relief angle, 0.4 mm corner radius Cylindrical hole with 40°–60° single-side countersink Reliable cutting performance for stainless-steel turning The combination of the AH6235 grade and a PVD-coated surface provides a balance between toughness and wear resistance that is particularly suited to stainless steels and unstable cutting conditions. This tougher cemented carbide resists notch wear and reduces the likelihood of edge breakouts during interrupted operations, so fewer indexings are required and cycle times remain consistent. Explained simply, the coating enhances adhesion resistance and heat tolerance while the substrate grants shock resistance — delivering more predictable tool life under challenging loads. Secure seating and ISO compatibility for repeatable setups The triangular geometry with a 60° angle and the ISO-format designation ensure compatibility with a wide range of indexable holders when the form, relief angle, tolerance class, fastening and thickness match. The cylindrical hole with a single-side countersink (40°–60°) enables consistent clamping forces and repeatable positioning, reducing setup variation between inserts. The 11° relief and the modest 0.4 mm radius control chip formation and influence surface finish: the geometry favours strength at the cutting edge while still permitting acceptable profile definition in most external and internal turning tasks. Practical guidance for machining and application selection This insert is intended for both external and internal turning; the one-sided chipbreaker should be chosen according to the component material, process stability and desired chip control. For interrupted cuts or components with susceptibility to built-up edge, the tougher AH6235 grade offers improved resistance to edge failure. When selecting the insert in a tool assembly, ensure the matching holder accepts ISO triangular inserts of size 11 and plate thickness 2.38 mm; the overall system comprises the ISO insert, a suitable external holder or boring bar, a backing pad/clamping kit and replacement screws for secure mounting. Contact Metav Werkzeuge for tailored holder recommendations and to secure the TPMT110204 AH6235 Tungaloy insert for demanding stainless-steel turning applications — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice. Technical data Article number: 6890193 SKU: 6890193-Tungaloy Manufacturer SKU: TUN6890193 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Size: 11 Relief/clearance angle: 11° Cutting angle: 60° Special features Material: carbide (Hartmetall) Coating/grade: AH6235 (PVD-coated) Plate form: triangular Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Typical use: external and internal turning, interrupted cuts FAQ What materials is this insert suitable for? The TPMT110204 AH6235 Tungaloy insert is formulated for stainless steels and other materials where a tougher PVD-coated carbide grade is preferred, including work with interrupted cuts. Can this insert be used for internal turning in a boring bar? Yes — the ISO-format triangular design of the TPMT110204 AH6235 allows use in compatible boring bars and holders when the holder matches the insert's size, thickness and fastening arrangement. How does the 0.4 mm radius affect part finish? A 0.4 mm radius provides a compromise between edge strength and surface finish; it increases edge robustness for interrupted cuts while maintaining acceptable profile definition for general turning. What does the hole style mean for clamping reliability? The cylindrical hole with a 40°–60° single-side countersink provides consistent seating and clamping force when paired with the correct screws and backing pad, aiding repeatable tool positioning. Is this insert compatible with standard ISO triangular holders? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; when those parameters match, the TPMT110204 AH6235 performs reliably in standard ISO triangular holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH6235 Wendeplatten - Tungaloy
Combining PVD-coated AH6235 toughness with a 0.4 mm corner radius and ISO conformity delivers a resilient solution for turning stainless steels and interrupted cuts; order the insert directly via Metav Werkzeuge or consult their experts for application-specific recommendations. TPMT110204 AH6235 — ISO triangular turning insert (PVD-coated carbide) by Tungaloy The TPMT110204 AH6235 is a triangular ISO-indexed turning insert designed for external and internal turning, offering enhanced resistance to chipping in interrupted cuts and demanding stainless-steel machining. PVD-coated carbide AH6235 ISO triangular insert TPMT110204 0.4 mm corner radius for fine turning Cylindrical hole with single-sided countersink Longer tool life on stainless steel and interrupted cuts The PVD-coated carbide grade AH6235 provides a balanced combination of toughness and wear resistance that is particularly beneficial when machining stainless steels or when frequent interruptions in the cut increase the risk of edge breakouts. The coating reduces adhesive built-up and improves heat resistance at the cutting edge, while the tougher substrate mitigates micro-chipping under unstable cutting conditions. For production environments where component integrity and tool-change frequency directly affect throughput, this geometry and grade translate into fewer interruptions and more consistent batch results. Consistent surface finish and repeatable geometry A 0.4 mm corner radius and an included angle of 60° give the insert reliable edge strength without sacrificing the ability to achieve refined surface finishes on turned parts. The moderate relief angle of 11° and a plate thickness of 2.38 mm support stable clamping and predictable cutting forces, which helps maintain dimensional accuracy across repeated cycles. Explaining the technical terms: the corner radius influences both edge robustness and the final surface texture, while the relief angle controls how the insert clears material behind the cutting edge—together they determine how the insert behaves at different feeds and depths of cut. Easy integration into ISO tooling systems and process advantages Marked as an ISO triangular insert (TPMT110204) and supplied with a cylindrical hole with a single-sided countersink (40°–60°), the insert fits standard external holders and bore-type toolholders designed for screw clamping. The single-sided chipbreaker geometry aids chip control for a range of stainless and alloy steels by directing swarf away from the cutting zone, reducing heat build-up and surface scuffing. For workshops aiming to streamline tooling inventories, the ISO designation ensures compatibility across many holder ranges, while the grade selection reduces the need for frequent rework or premature tool replacement. Contact Metav Werkzeuge for tailored process guidance and to secure TPMT110204 AH6235 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for consulting and ordering support Technical data Article number: 6890210 SKU: 6890210-Tungaloy Manufacturer SKU: TUN6890210 Model series: ISO turning inserts Application: Turning Material: carbide Numbers / Core technical data Thickness: 2.38 mm Inscribed circle / size: 11 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole/countersink: cylindrical hole + single-sided countersink (40°–60°) Designs / Special features Shape: triangular Grade: AH6235 (PVD-coated carbide) Chipbreaker: single-sided Suitable for: stainless steels and interrupted cuts ISO designation: TPMT110204 Clamping: insert with hole for screw fixing FAQ What materials is this insert best suited for? The TPMT110204 AH6235 insert is optimised for stainless steels and performs well in interrupted-cut situations where toughness and chipping resistance are required. How does the AH6235 grade affect tool life? AH6235, a PVD-coated carbide, combines a wear-resistant coating with a tougher substrate, which reduces edge chipping and extends usable life in demanding turning operations. What size and clamping style does the insert use? The insert is ISO triangular, size 11 mm with a thickness of 2.38 mm and a cylindrical hole with single-sided countersink, compatible with holders that accept TPMT110204 geometry. Can this insert improve surface finish? Yes. The 0.4 mm corner radius and 11° relief angle promote stable cutting and help achieve consistent surface quality when parameters are correctly matched to the workpiece and turning conditions. Is the TPMT110204 AH6235 suitable for internal turning? Yes. The ISO triangular geometry and clamping hole allow use in both external and internal turning holders designed for TPMT inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH725 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide, the universal AH725 grade and compact triangular geometry for stable, repeatable turning performance; order the insert directly via Metav Werkzeuge or consult the team for application advice. TPMT110204 AH725 Turning insert — PVD-coated carbide, universal grade (Tungaloy) TPMT110204 AH725 is a triangular ISO turning insert designed for external and internal turning applications, offering a universal, chipbreak-resistant grade for steel and stainless steels in demanding production environments. PVD-coated carbide for extended tool life Universal AH725 grade for steel and stainless steels Triangular 11 mm insert, 60° included angle One-sided chipbreaker for stable cutting Compatible with ISO turning holders Consistent process security through material and grade The insert combines a PVD-coated surface with a carbide substrate and the AH725 grade to deliver consistent process reliability across varying steels and stainless steels. The PVD layer reduces adhesion and wear at the cutting edge, which translates into longer tool life and fewer interruptions. This makes the component particularly suitable where mixed-material batches or small tools demand a robust, predictable performance. Geometry engineered for rigidity and surface finish A triangular shape with a 60° included angle, 0.4 mm corner radius and an 11° clearance angle provides a balance between cutting-edge strength and finishing capability. The seating hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures secure clamping and repeatable positional accuracy. These geometric decisions improve stability, reduce vibration and help achieve better surface quality on turned parts. Integration into ISO tooling systems for quick changeovers Designed as part of the ISO turning insert family, the component fits standard external holders or boring bars when the holder form, clearance, tolerance class, fastening and thickness match. The system build typically comprises the ISO insert, a compatible outer holder or bar, a support shim/clamp set and replacement screws. The one-sided chipbreaker aids chip control in a wide range of cutting parameters, lowering downtime caused by poor chip evacuation. Broad application spectrum and clear machining advantages Intended primarily for turning, the insert performs well in both external and internal operations and is optimised for steel and stainless steels. The universal, fracture-resistant grade is a strong choice when workpiece materials vary or when higher process security is required. The combination of a tough carbide substrate and PVD treatment helps maintain a sharp, wear-resistant edge, resulting in fewer insert changes and improved productivity on the shop floor. For dependable turning with the Tungaloy AH725 grade, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6865368-Tungaloy Manufacturer SKU: TUN6865368 Manufacturer article number: 6865368 Model series: ISO turning inserts Material: carbide Grade: AH725 Core data Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Shape: triangular Bore: with hole Bore style: cylindrical hole + one-sided countersink (40°–60°) Design & features Coating: PVD Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO holders/boring bars System components: insert, outer holder or boring bar, support shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The TPMT110204 AH725 turning insert is specified for steel and stainless steels, with the AH725 grade designed for universal, fracture-resistant performance across varying materials. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; the insert is compatible with standard ISO external holders and boring bars when those parameters match. What does the PVD coating provide? The PVD coating on this carbide insert improves wear resistance and reduces built-up edge, helping to extend tool life and maintain stable cutting performance. How does the chipbreaker affect machining? The one-sided chipbreaker promotes controlled chip formation and evacuation, which enhances process security and reduces the risk of chip-related interruptions during turning. Is the insert supplied with fastening hardware? The system typically comprises the ISO insert plus the appropriate outer holder or boring bar and requires the matching support shim/clamp set and replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated hardness and a compact 60° triangular geometry for stable, repeatable turning results; the fracture-resistant AH725 grade extends tool life and reduces interruptions in mixed-material production. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and optimal chipbreaker selection. TPMT110204 AH725 TPMT turning indexable insert, 60° triangular, by Tungaloy The TPMT110204 AH725 is an ISO-conforming triangular indexable insert designed for external and internal turning, offering a universal, fracture-resistant grade for steel and stainless steel applications. PVD-coated carbide grade AH725 Universal, fracture-resistant for steel and stainless 60° triangular form with 0.4 mm corner radius Central hole with 40°–60° countersink Consistent process security through robust grade and coating The combination of a PVD-coated surface and the AH725 carbide grade delivers a balance of wear resistance and toughness suited to variable component batches and intermittent interrupted cuts. This indexable insert reduces the frequency of edge failures in demanding operations, which directly supports longer uninterrupted cycle times and fewer tool changes. Compatibility within the ISO insert family ensures predictable replacement routines, while the universal nature of the grade allows use across a broad range of steels and stainless steels without frequent grade swaps. Geometry engineered for repeatable surface quality and chip control A 60° triangular form with a 0.4 mm corner radius provides a compromise between strength and fine finishing capability: the 60° included angle stabilises cutting forces, while the 0.4 mm radius improves edge life and surface integrity on external profiles. The one-sided chipbreaker and the central hole with a single-side countersink (40°–60°) support reliable chip flow and secure seating in the toolholder, reducing chatter and producing consistent part finish on both long and short runs. The 2.38 mm plate thickness helps maintain rigidity in smaller tool assemblies. Simple integration into ISO-based turning systems Delivered as part of an ISO insert system, the package assumes use with a matching external holder or boring bar, plus the necessary underlay/clamping set and spare screws. Secure clamping is achieved by the cylindrical hole and the specified countersink geometry, which together prevent micro-movement and ensure repeatable positioning after index changes. Selection of the appropriate chipbreaker and insert grade should follow an assessment of workpiece material, cut depth and machine/tool stability, thereby aligning productivity goals with process reliability. Applications that benefit from the TPMT design This insert is particularly suitable for machining shops performing both external and internal turning where a flexible, robust solution is required for steels and stainless steels. The compact triangular format works well for smaller tools and setups where tool change frequency must be minimised without sacrificing surface quality. Brand-recognised manufacturing standards support predictable results and help maintain machining consistency across batches and operators. Contact Metav Werkzeuge today to specify the TPMT110204 AH725 insert for improved process security and tailored holder compatibility; the Metav Werkzeuge team will advise on chipbreaker and clamping options to suit the application. Technical data Article number: 6856724 SKU: 6856724-Tungaloy Manufacturer SKU: TUN6856724 Brand: Tungaloy Application: Turning Facts Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Design and features Material: carbide Coating / grade: AH725 (PVD-coated carbide) Insert form: triangular Hole style: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Model series: ISO indexable turning inserts Use: external and internal turning FAQ What materials is the TPMT110204 AH725 suitable for? The TPMT110204 AH725 insert is designed primarily for steel and stainless steel, its fracture-resistant AH725 grade allowing reliable performance across mixed batches. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius on the TPMT110204 AH725 balances edge strength with surface finish, improving part quality while extending edge life under moderate feeds. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, mounting and insert thickness; the TPMT110204 AH725 fits any ISO holder matching those parameters. Is the insert supplied with clamping hardware? The insert is intended for use within a system comprising an ISO insert, matching external holder or boring bar, underlay/clamping set and spare screws, which should be procured as required. What is the purpose of the countersunk central hole? The cylindrical hole with a 40°–60° single-side countersink secures the insert in the pocket and ensures repeatable seating and clamping for stable machining with the TPMT110204 AH725. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH725 Wendeplatten - Tungaloy
Reliable turning performance and broad material coverage from a PVD-coated carbide AH725 grade combined with a 0.4 mm corner radius supports stable chip formation and high process security. Order the inserts directly via Metav Werkzeuge or consult our advisors for application support. TPMT110204 AH725 triangular turning insert for turning – Tungaloy TPMT110204-PS AH725 is an ISO-series triangular turning insert designed for external and internal turning with a PVD-coated carbide grade for high process security ISO triangular insert, standardised fit PVD-coated carbide grade AH725 Fracture‑resistant for steel and stainless Cylindrical hole with 40°–60° countersink Consistent performance for mixed-material turning The PVD-coated carbide construction of this triangular insert delivers a predictable wear profile and process security across varied steels and stainless steels. The AH725 grade is optimised for universal use and offers stable chip formation, which reduces the risk of unexpected edge breakouts during interrupted cuts or when switching workpiece materials. For production environments that require consistent results, the combination of coating and grade supports longer tool life and reliable cycle times. Geometry that balances strength and accessibility With a 60° included angle and a 0.4 mm corner radius, the insert provides a good compromise between edge strength and fine finishing capability. The plate has a 2.38 mm thickness and an 11° relief angle, which together influence rigidity and clearance at the cut; these dimensions help maintain a stable cutting edge under load. The triangular shape allows three cutting edges per insert, and the cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and repeatable seating in ISO-compatible holders. Integration into ISO turning systems and application guidance As part of the ISO turning insert family, compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The chipbreaker coded PS is suitable where chip control and process stability are priorities; select the chipbreaker and grade according to the workpiece material and the rigidity of the tooling setup. This insert is suitable for both external and internal turning operations and performs well on smaller toolholders where process reliability is essential. Efficiency and surface quality through material and coating The PVD coating on this carbide insert improves wear resistance and edge stability, which contributes to a more consistent surface finish over longer tool life. The fracture‑resistant character of the grade reduces the frequency of unexpected insert failures, helping to lower downtime and tooling costs in the medium to high‑volume turning applications. For workshops dealing with mixed batches of steel and stainless steels, the grade provides a practical balance between productivity and reliable performance. Contact Metav Werkzeuge to request advice or to order genuine Tungaloy TPMT110204-PS AH725 inserts with PVD-coated carbide for secure, high‑process‑security turning operations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6856676 Manufacturer SKU: TUN6856676 OEM SKU: 6856676-Tungaloy Model series: ISO turning inserts Facts Radius: 0.4 mm Thickness: 2.38 mm Included angle: 60° Relief angle: 11° Size: 11 Special features Material: carbide (PVD-coated) Grade: AH725 (fracture-resistant) Shape: triangular Hole: cylindrical hole with one-sided countersink 40°–60° Application: turning (external and internal) FAQ What materials is this insert suitable for? This insert, the TPMT110204-PS AH725 from Tungaloy, is specified for use on steel and stainless steels and is formulated to handle mixed-material production with stable chip control. How does the AH725 grade affect tool life? The AH725 grade combines fracture resistance with a PVD coating to improve wear resistance and edge stability, which typically extends insert life and reduces unplanned changes in production. Which chipbreaker is fitted and when should it be used? The insert uses the PS chipbreaker, which is best employed where reliable chip control and process security are priorities, particularly in unstable setups or interrupted cutting. Is the insert compatible with standard ISO holders? Yes; the design follows ISO norms for turning inserts. Compatibility is determined by insert form, relief angle, tolerance class, fastening and thickness, so matching the holder specifications ensures repeatable seating. What are the mounting features of the insert? The TPMT110204-PS AH725 has a cylindrical hole with a single-sided countersink (40°–60°) to allow secure clamping and consistent placement in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide AH725 grade and a compact 0.4 mm corner radius to secure consistent chip control and high process reliability in turning operations. The combination of an ISO triangular form, 11° clearance and stable clamping via a cylindrical hole with 40°–60° countersink ensures quick tool changes and low risk of insert breakage. Order the TPMT110204 AH725 directly via Metav Werkzeuge or consult the team for application advice. TPMT 110204 AH725 — ISO triangular turning insert, PVD-coated carbide, 11° clearance (Tungaloy) TPMT110204 AH725 is an ISO-indexable turning insert engineered for external and internal turning, offering a universal, breakout-resistant carbide grade for steel and stainless steels. Universal PVD-coated carbide AH725 11° clearance for stable cutting Triangular ISO shape, 11 mm size Cylindrical hole with 40°–60° countersink Consistent cutting performance with a universal PVD grade The AH725 grade is a PVD-coated carbide engineered for reliable performance across a wide range of steels and stainless steels. Its composition and coating combination provide stable chip formation and reduced edge chipping under changing material conditions, so fewer unplanned interruptions occur. The insert’s small 0.4 mm corner radius helps deliver predictable engagement and fine surface finishes when light cuts are required, while the PVD coating supports wear resistance in intermittent turning. These attributes translate into higher process uptime and reduced tool change frequency, which benefits batch production and mixed-material workflows. Fast, secure clamping and ISO compatibility for reliable set-up Designed to ISO standards, the triangular geometry and defined dimensions make holder selection straightforward; compatibility depends on the insert’s shape, 11° clearance, tolerance class, attachment style, size and thickness. The cylindrical hole with a 40°–60° countersink provides secure seat and concentric clamping, reducing vibration and maximising repeatability from cut to cut. With a plate thickness of 2.38 mm and an inscribed circle of 11 mm, the insert fits small external and internal holders where compactness and rigidity are necessary. Clear mechanical interfaces shorten set-up times and support consistent machining results even in short-production runs. Practical selection guidance for turning applications For typical external and internal turning, pair the insert’s one-sided chipbreaker with an appropriate feed and depth of cut to match workpiece stability and the chosen operation. The universal character of the grade makes it a sensible choice when material mixes occur or when using smaller toolholders with limited overhang. Selecting this insert reduces the need for multiple specialised grades, while the ISO triangular form and defined nose radius allow controlled material removal and good surface integrity. When process security and predictable tool life are priorities, this insert offers a balanced solution between performance and economy for everyday turning tasks. For reliable, high-process-security turning with Tungaloy AH725 inserts, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6865360 Manufacturer SKU: TUN6865360 Label: TPMT110204 AH725 Tungaloy insert Manufacturer: Tungaloy Material: Carbide Model series: ISO turning inserts Core technical values Included angle: 60° Clearance angle: 11° Thickness: 2.38 mm Inscribed circle: 11 mm Corner radius: 0.4 mm Special features Grade AH725 (PVD-coated carbide) One-sided chipbreaker Cylindrical hole with 40°–60° countersink Triangular ISO shape Suitable for steel and stainless steels Application: external and internal turning Compatibility determined by holder form, clearance, tolerance, attachment, size and thickness FAQ What materials is this insert suitable for? The TPMT110204 AH725 insert is designed as a universal solution and is suitable for machining steel and stainless steels, thanks to the PVD-coated carbide grade. What is the inscribed circle and why does it matter? The insert has an inscribed circle of 11 mm, which defines the compatible toolholder size and affects rigidity and chip evacuation during turning. How does the 0.4 mm corner radius influence the cut? A 0.4 mm corner radius gives a controlled cutting edge for fine finishes and reduced notch sensitivity, useful when consistent surface quality is required. What clamping style does the insert use? This insert features a cylindrical hole with a single-sided countersink (40°–60°), providing secure and repeatable clamping in compatible ISO holders. Can this insert be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning; select the chipbreaker and cutting parameters according to workpiece stability and required surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 AT9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, consistent wear and straightforward mounting with the TPMT110204 AT9530 insert; the coated cermet grade ensures elevated surface quality while the 0.4 mm corner radius delivers tight dimensional control. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPMT110204 AT9530 Tungaloy indexable turning insert — coated cermet, 0.4 mm radius The TPMT110204 AT9530 Tungaloy indexable insert is a triangular ISO insert for finishing and light turning of steel, optimised for high surface quality and uniform wear in external and internal turning applications Coated cermet AT9530 for fine surface finish 0.4 mm corner radius for precise contours ISO TPMT110204 triangular geometry Single‑sided chipbreaker and bore with countersink Superior surface quality for finishing cycles The insert combines a coated cermet AT9530 grade with a triangular geometry to deliver an improved surface finish during finishing and light machining of steel. Cermet combines ceramic hardness with metallic toughness, producing a cutting edge that resists built‑up edge and promotes even wear, which reduces the need for rework and supports consistent part quality. In practice, the result is fewer secondary operations and a smoother production flow when high surface integrity is the priority. Predictable performance and stable cutting conditions A 0.4 mm corner radius and an 11° clearance angle contribute to stable cutting forces and repeatable results in finishing passes. The single‑sided chipbreaker supports controlled chip formation under light cutting depths, which helps maintain a steady tool life and predictable tool change intervals. These characteristics support a rational efficiency argument: improved uptime through consistent performance and lower process variation. Clear compatibility and secure clamping for reliable setup The insert’s TPMT110204 ISO designation, triangular shape with a 60° included angle and a bore with a cylindrical hole plus a single‑side countersink (40°–60°) ensure secure clamping in compatible holders. Compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching those parameters prevents fitment errors and supports reliable production starts. The plate thickness of 2.38 mm and the size 11 are relevant when checking holder compatibility. Practical application guidance and process benefits Designed for external and internal turning, the insert is best used for finishing and light cuts where surface quality and uniform wear are required. Select the single‑sided chipbreaker and the AT9530 grade with regard to material, stability of the setup and feed/speed strategy to exploit the insert’s strengths. If the application call is unclear, further machining data such as workpiece material and stability will help determine the optimal chipbreaker and cutting parameters; Metav Werkzeuge’s technical advisory can assist with that evaluation. Contact Metav Werkzeuge for tailored selection of Tungaloy indexable inserts and advice on holder compatibility, cutting parameters and availability via Metav Werkzeuge’s specialists Technical Data Article number: 6727514 Manufacturer SKU: TUN6727514 SKU: 6727514-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Clearance angle: 11° Thickness: 2.38 mm Size (inscribed circle): 11 mm Included angle: 60° Manufacturer article number: 6727514 Special features Grade: AT9530 (coated cermet) Substrate: carbide Shape: triangular Bore: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Application: finishing and light turning of steel ISO designation: TPMT110204 Compatibility depends on form, clearance angle, tolerance, fastening, size and thickness FAQ Which materials is this insert best suited for? The insert is designed primarily for finishing and light machining of steel; the AT9530 grade emphasises surface quality and consistent wear when turning steel components. What does the AT9530 designation indicate? AT9530 denotes a coated cermet grade engineered for finishing work: it offers a fine edge condition, reduced built‑up edge tendency and uniform wear characteristics suitable for high surface‑quality requirements. How is compatibility with a toolholder verified? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder prevents misfit and ensures secure clamping. What is the function of the bore and countersink design? The cylindrical hole combined with a single‑side countersink (40°–60°) provides a reliable seating and positive clamping engagement, improving repeatability and reducing the risk of movement under cutting loads. Which chipbreaker should be selected for finishing? For finishing passes choose the single‑sided chipbreaker supplied with this geometry and pair it with the AT9530 grade for superior surface finish and controlled chip formation in light turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GH730 Wendeplatten - Tungaloy
Combining the GH730 wear-resistant grade with a cemented carbide substrate and a 0.4 mm corner radius, this ISO‑compliant triangular insert delivers reliable, repeatable machining results for turning applications; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TPMT110204 GH730 — Tungaloy indexable turning insert (ISO 110204) for turning The TPMT110204 GH730 is an ISO‑spec triangular indexable insert engineered for external and internal turning, offering a balanced blend of wear resistance and edge stability. ISO 110204 triangular insert design GH730 grade for enhanced wear resistance 0.4 mm corner radius for fine profiling Cylindrical hole with countersink for secure clamping Consistent cutting performance for production turning The insert is manufactured from cemented carbide and specified in the GH730 grade to combine wear resistance with sufficient toughness for stable cutting edges. As an ISO series item, it supports consistent replacement cycles and predictable tool life, which helps maintain process stability and reduces downtime. The combination of the grade and geometry supports efficient material removal rates while preserving surface finish quality, contributing to improved throughput in repetitive turning operations. Compatibility and straightforward tool integration Designed to fit ISO‑specified toolholders, compatibility is determined by form, clearance angle, tolerance class, clamping style, size and thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to ensure secure clamping and simple mounting into matching holders. The 2.38 mm thickness and triangular shape with a standard 11 mm size enable integration into common external and internal turning tool assemblies used in industry, simplifying stock management and tool change procedures. Optimised chip control and extended edge life The single‑sided chipbreaker and the GH730 formulation are selected to manage chips effectively while preserving the cutting edge under varying cutting conditions. The single‑sided chipbreaker supports predictable chip formation, reducing the risk of built‑up edge and improving surface quality. The 0.4 mm corner radius offers a compromise between edge strength and detailability, ideal for finishing passes and light profiling where a defined radius improves component integrity. Practical handling and recommended applications With a 11° clearance angle and a 60° wedge angle, the insert suits general turning tasks that require a stable seating and defined cutting geometry. The system approach — insert, matched external holder or boring bar, support pad/clamping set and replacement screws — ensures reproducible clamping forces and repeatable performance. Selection of chipbreaker and grade should be matched to the workpiece material and the rigidity of the setup; smaller radii favour finer contours, while the GH730 grade favours longer edge life under semi‑finishing to finishing conditions. Contact Metav Werkzeuge for tailored application advice and to secure fast delivery of Tungaloy turning inserts; consultants are available to match grade and geometry to specific turning tasks and production demands, Metav Werkzeuge, Parkring 45, 46446 Emmerich, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6821013 Brand: Tungaloy Manufacturer SKU: TUN6821013 Material: Cemented carbide Core specifications ISO designation: 110204 Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Wedge angle: 60° Design and features Triangular insert geometry GH730 grade (Tungaloy) Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) Intended application: Turning (external and internal) FAQ What materials is this insert suited for? The GH730 grade and the cemented carbide substrate make the TPMT110204 GH730 suitable for a broad range of turning tasks where wear resistance and edge stability are required; the final selection depends on the workpiece material and machining parameters. How is the insert clamped in the holder? The insert uses a cylindrical hole with a one‑sided countersink to allow secure clamping in appropriately designed ISO holders and support pads, ensuring repeatable seating and clamping forces for the TPMT110204 GH730. What does the 0.4 mm corner radius mean for finishing? A 0.4 mm corner radius increases edge strength while still permitting fine surface profiling, making the insert appropriate for finishing passes where a defined contour is needed. Can the chipbreaker be used for heavy roughing? The single‑sided chipbreaker is optimised for controlled chip formation; while suitable for many turning operations, the machining strategy for heavy roughing should consider insert grade, machine rigidity and clamping stability before selecting this insert for high‑stock removal. How to ensure compatibility with existing toolholders? Compatibility is determined by insert form, clearance angle, tolerance class, clamping arrangement, size and thickness; match these parameters with holder specifications to confirm fit for the TPMT110204 GH730. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com