TPMT 090208 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge, PVD-coated carbide and ISO compatibility to ensure consistent turning results and efficient chip control; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPMT 090208 AH6225 indexable insert for turning — Tungaloy TPMT 090208 AH6225 is an ISO‑normed triangular indexable insert designed for general turning applications, optimised for stainless steel machining. PVD-coated carbide grade AH6225 Optimised for stainless steel turning ISO‑compliant triangular insert 09 11° clearance, 0.8 mm corner radius Consistent chip control with a sharp, durable cutting edge The TPMT090208 AH6225 insert combines a PVD-coated surface with a high-performance carbide substrate to deliver dependable edge stability during medium turning operations. The AH6225 grade is formulated for stainless steel, providing a balance between a sharp cutting edge and resistance to wear; this reduces built-up edge and helps maintain surface finish under varying conditions. Explaining briefly: the PVD layer lowers adhesion and improves heat resistance, while the carbide core supports mechanical strength — together enabling longer indices between changes and fewer process interruptions. ISO compatibility for rapid toolset integration The triangular design is ISO‑compliant, which simplifies holder selection and reduces setup time. Key dimensional features include a triangular insert size 09, 2.38 mm thickness, and an integrated 0.8 mm corner radius, matched to common ISO tooling systems. Compatibility with a holder depends on shape, clearance and tolerance class as well as size and thickness; choosing the correct holder and clamp ensures stable clamping forces and repeatable positioning. This interchangeability supports lean production and makes stocking and replenishment more efficient. Practical advantages in internal and external turning Designed for both external and internal turning, the insert features a one-sided chipbreaker and a cylindrical hole with single-side countersink (40°–60°), facilitating secure mounting and predictable chip formation. The 11° clearance contributes to controlled cutting forces and reduces rubbing on the flank, which helps preserve workpiece geometry and extends insert life. For workshop planners, the combination of universal grade and standard geometry means fewer special inserts are needed, which improves process reliability and overall machining economy. For reliable stainless steel turning choose the Tungaloy TPMT090208 AH6225 — contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6831372 Manufacturer SKU: TUN6831372 SKU: 6831372-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: AH6225 Core measurements Corner radius: 0.8 mm Insert size: 09 Plate thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Design & features Shape: triangular Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Coating: PVD Application: turning FAQ Which materials is this insert suited for? The AH6225 grade is a universal PVD-coated carbide designed primarily for stainless steel machining; it performs well under medium cutting conditions and varying workpiece properties. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO geometry conventions — compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness to the chosen holder. What are the key geometry values to check before mounting? Check the 0.8 mm corner radius, 11° clearance, 2.38 mm thickness and the triangular 09 size to ensure correct fit and performance. How is the insert secured in the holder? The insert features a cylindrical hole with single-side countersink (40°–60°) for screw fastening; this provides secure clamping and precise positioning for repeatable turning operations. Can this insert be used for internal turning? Yes; the geometry and chip control features make it suitable for both external and internal turning tasks when paired with an appropriate holder and tooling setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp yet stable cutting edge, durable PVD‑coated carbide and precise ISO geometry for reliable turning performance; order directly via Metav Werkzeuge or request technical advice from our consultants. TPMT090208 AH6225 Tungaloy – ISO triangular turning insert, PVD‑coated carbide, 60° geometry The TPMT090208 AH6225 is an ISO‑norm triangular turning insert designed for external and internal turning, optimised for medium‑duty machining of stainless steels with a focus on stable chip formation. 60° triangle geometry for versatile turning PVD‑coated carbide AH6225 for stainless steels 0.8 mm corner radius for a robust cutting edge Single‑sided chipbreaker with central hole fit Higher output through a balanced grade and coating The combination of a PVD‑coated carbide grade and a deliberately balanced microgeometry delivers measurable productivity benefits in moderate turning operations. The AH6225 grade is formulated to give a sharp yet stable cutting edge, which reduces cutting forces under varying conditions and extends effective tool life. This results in fewer insert changes per shift and more consistent cycle times when machining stainless steels and similar alloys. The result is improved process stability and a lower cost per component in continuous production. Reliable clamping and dimensional accuracy for repeatable results The ISO triangular form with an included angle of 60°, a 0.8 mm corner radius and a relief angle of 11° ensures secure seating in standard external holders and boring bars. The insert thickness of 2.38 mm and the specified hole style — cylindrical hole with single‑side countersink (40°–60°) — provide repeatable positioning and straightforward clamping. Because holder compatibility depends on form, relief angle, tolerance class, fastening and plate size, this insert integrates into standard ISO systems with predictable accuracy, giving tighter tolerances and improved surface finish on turned parts. Practical selection and machining advantages Designed with a single‑sided chipbreaker, the insert supports controlled chip formation during interrupted and continuous cuts, reducing the risk of built‑up edge and improving surface quality. The geometry and grade make it suitable for both external and internal turning tasks where medium material removal rates are required. Choosing the correct chipbreaker and maintaining cutting parameters aligned with the grade’s capabilities leads to stable machining, consistent repeatability and a reduced need for rework — advantages that translate to time and cost savings in production. For reliable, productive stainless steel turning with the Tungaloy TPMT090208 AH6225, contact Metav Werkzeuge for technical advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6829888 Manufacturer SKU: TUN6829888 Metav SKU: 6829888-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Included angle: 60° Corner radius: 0.8 mm Relief angle: 11° Thickness: 2.38 mm Size designation: 09 Designs / Special features Material: Carbide (PVD‑coated, grade AH6225) Shape: Triangular (TPMT) Chipbreaker: Single‑sided Central hole: With hole; cylindrical hole + single‑side countersink (40°–60°) Application: Turning (external and internal) Typical system: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The TPMT090208 AH6225 is specified as a universal grade for stainless steels, optimised for medium machining and changing cutting conditions. Which machining tasks suit this insert best? This indexable insert is intended for both external and internal turning operations where a balance of edge sharpness and stability is required. How does the chipbreaker affect performance? The single‑sided chipbreaker on this insert promotes controlled chip formation, improving surface finish and reducing built‑up edge in intermittent and continuous cuts. Is the insert compatible with standard ISO holders? The triangular ISO form and the central hole/countersink arrangement make the insert compatible with standard ISO holders, provided holder geometry, clearance angle and clamping elements match the insert specifications. What benefit does the AH6225 grade deliver? The AH6225 PVD‑coated carbide offers a stable cutting edge for stainless steels, enhancing tool life and process reliability under variable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade and ISO‑standard geometry for reliable performance in turning stainless steels and interrupted cuts; order the insert directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. TPMT 090208 AH6235 Tungaloy turning insert — PVD‑coated carbide, 0.8 mm nose radius TPMT 090208 AH6235 is an ISO‑standard triangular turning insert designed for external and internal turning where toughness and chip‑control are required PVD-coated carbide AH6235 for stainless steels ISO triangle insert, size 09, 0.8 mm nose radius Cylindrical hole with 40°–60° one-sided countersink 11° clearance angle and 2.38 mm plate thickness Durable grade for demanding stainless‑steel work The PVD‑coated AH6235 grade provides a tough, abrasion‑resistant cutting edge that is particularly suited to machining stainless steels and situations with intermittent engagement. The coating stabilises the cutting edge at elevated temperatures and lowers the risk of built‑up edge, while the substrate controls fracture under interrupted cuts. This results in more consistent tool life and fewer unplanned tool changes, improving process throughput and reducing overall machining costs. Stable geometry for consistent surface quality The triangular ISO geometry and a 0.8 mm nose radius deliver a balance between edge strength and form accuracy, making the insert suitable for medium‑duty finishing and semi‑finishing operations. The 11° clearance angle and 2.38 mm plate thickness ensure secure seating and resistance to edge deflection, which supports a stable cutting action and consistent surface finish. Owing to the robust shape, repeatability between indexings is improved and tolerance adherence becomes more reliable. Plug‑and‑play compatibility with ISO holders Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation simplifies holder selection. The insert is supplied with a cylindrical hole plus a one‑side countersink (40°–60°) for standard clamping systems and quick, reproducible mounting. For best results, pair the insert with a matching external holder or boring bar, a suitable shim/clamp set and the correct screw; this system approach minimises set‑up time and supports safe, repeatable operation on production lines. Targeted use and productivity gains Engineered for external and internal turning, this insert performs especially well where interrupted cuts or increased chipping risk occur. Selecting the right one‑sided chipbreaker and the AH6235 grade according to workpiece material and machine rigidity will reduce cycle times and improve component quality. The combination of a tough substrate and PVD coating helps maintain a stable cutting edge, which can translate into fewer tool changes and higher overall productivity on the shop floor. Contact Metav Werkzeuge for tailored application advice and to secure the TPMT 090208 AH6235 Tungaloy inserts via e‑mail info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6903511 SKU: 6903511-Tungaloy Manufacturer SKU: TUN6903511 Material: Carbide Coating: PVD Facts Shape: triangular (09) Nose radius: 0.8 mm Relief angle: 11° Plate thickness: 2.38 mm Hole: cylindrical + one‑side countersink (40°–60°) Included angle: 60° Special features Grade: AH6235 (tough for stainless steels) One‑sided chipbreaker ISO‑compliant turning insert Suitable for external and internal turning Typical system: insert, external holder or boring bar, shim and clamp set FAQ Which materials is this insert best suited for? The TPMT 090208 AH6235 Tungaloy turning insert is optimised for stainless steels and is recommended for interrupted cuts or applications with elevated chipping risk. Which holders are compatible with this insert? Compatibility is based on ISO geometry; use a triangle pocket holder for size 09 with matching clearance angle and clamp style to mount the TPMT 090208 AH6235 insert securely. What does the hole and countersink specification mean for mounting? The cylindrical hole with a one‑side countersink (40°–60°) on the TPMT 090208 AH6235 enables standard screw clamping and reproducible positioning in ISO‑compliant toolholders. How should the chipbreaker and grade be chosen? Select the chipbreaker and grade to match workpiece material and machining stability; the AH6235 grade is a tougher option suited to stainless steels and unstable cutting conditions. Can this insert be used for finishing operations? Yes—with the 0.8 mm nose radius and correct cutting parameters the insert can deliver consistent surface quality for finishing and semi‑finishing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6235 grade, proven edge stability and an ISO-standard triangular form for reliable machining of stainless steels; order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility. TPMT090208 AH6235 — ISO triangular turning insert with PVD-coated carbide for stainless-steel turning (Tungaloy) The TPMT090208 AH6235 is an ISO-standard triangular turning insert designed for external and internal turning operations, offering a PVD-coated carbide grade optimised for interrupted cuts and materials prone to edge chipping. ISO triangular insert TPMT090208, 11° relief PVD-coated AH6235 grade for stainless steel Cylindrical hole with 40°–60° single-side countersink 0.8 mm corner radius for robust edge performance Consistent machining of stainless steels with a tougher grade The AH6235 grade combines a PVD coating with a tough carbide substrate to reduce chipping in demanding stainless-steel applications. The result is improved edge life and fewer unexpected interruptions during production. This grade is designed specifically for operations where material adhesion, work-hardening and intermittent cuts increase the risk of breakout; choosing a tougher substrate and protective coating mitigates those effects. The coating also assists in thermal and chemical resistance, extending tool life in continuous and semi-continuous turning tasks. Stable geometry and ISO compatibility for predictable set-up The triangular TPMT090208 geometry offers three effective cutting corners per index and a compact profile suited to confined tool spaces. Key geometry values — 11° relief angle, 0.8 mm corner radius and 2.38 mm plate thickness — provide a balance between edge strength and accessibility in tight grooves or profiles. The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure secure clamping and consistent seating in compatible holders. Because compatibility is determined by form, relief, tolerance class, fixing style, size and thickness, the ISO interface simplifies replacement and inventory management across ISO tooling systems. Practical guidance for selecting chipformers, holders and applications This insert is supplied with a single-sided chipbreaker, optimised for chip control in both external and internal turning. Typical system components include the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws. For interrupted cuts or unstable set-ups, the AH6235 grade is recommended to reduce edge damage; for continuous finishing passes, a finer geometry or different grade may be preferable. For holder selection, match the insert form and clearance angle to the machine rigidity and workpiece clamping. If specific compatibility or machining parameters are required, Metav Werkzeuge’s technical team can advise on the optimal holder and process parameters. Specify the AH6235 grade from Tungaloy for demanding stainless-steel turning operations and contact Metav Werkzeuge for tailored holder recommendations and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6890202 Manufacturer SKU: TUN6890202 Product SKU: 6890202-Tungaloy Designation: TPMT090208 AH6235 Series: ISO turning inserts Manufacturer: Tungaloy Facts Size: 09 Plate thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Countersink angle: 40°–60° Special features Triangular insert form PVD-coated carbide grade AH6235 Single-sided chipbreaker Cylindrical hole with single-side countersink Designed for external and internal turning Suitable for interrupted cuts and materials with increased breakout risk System: insert + holder/boring bar + shim/clamping set + spare screws FAQ What materials is this insert best suited for? The AH6235 grade is formulated for stainless steel machining; the TPMT090208 insert from Tungaloy performs well in interrupted cuts and applications with higher breakout risk. How is the insert clamped in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) to ensure secure seating and repeatable clamping in compatible ISO holders. What does the 11° relief angle mean for cutting performance? An 11° relief angle provides clearance behind the cutting edge to reduce rubbing and improve chip flow, contributing to predictable cutting forces and extended edge life. Is the insert indexed, and how many cutting edges are available? The triangular TPMT geometry offers three indexed cutting corners per insert, allowing economical regrinding or rotation of edges within the ISO system. Which chipbreaker should be chosen for finishing versus roughing? This SKU is supplied with a single-sided chipbreaker, which balances chip control and edge strength; for fine finishing passes, consider a different chipformer or grade tailored to surface-finish requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH6235 Wendeplatten - Tungaloy
Take advantage of the insert’s combination of reliable PVD-coated carbide performance, a 60° triangular geometry and a secure clamping interface for consistent turning results; order the TPMT090208 AH6235 insert through Metav Werkzeuge or consult our specialists for application advice. TPMT090208 AH6235 TPMT turning insert by Tungaloy — PVD-coated carbide, 60° triangular geometry The TPMT090208 AH6235 is an ISO-format triangular turning insert for external and internal turning, designed for applications on rostfreier Stahl and for interrupted cuts where increased chip control is required ISO triangular insert TPMT 090208 PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts 60° geometry with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Productive turning with defined geometry for steady cycle times The triangular 60° geometry combined with a 0.8 mm corner radius delivers a balance of strength and accessibility at the cutting edge, supporting repeatable toolpaths and predictable tool life. Because the insert is manufactured to ISO specifications, compatibility with a matching holder depends on form, relief angle, tolerance class, fixation and thickness; this standardisation simplifies tool selection and reduces setup time on the shop floor. The overall design is aimed at maintaining stable cutting conditions, which in turn helps to reduce scrap rates and keep machining cycles consistent. Reliable performance on rostfreier Stahl and difficult interrupted cuts The AH6235 grade is a PVD-coated carbide selected for tougher applications on rostfreier Stahl and for operations with elevated risk of edge breakout. The PVD coating enhances wear resistance and helps preserve the cutting edge temperature stability, while the substrate provides the toughness needed for interrupted cuts. For users unfamiliar with coatings: PVD (physical vapour deposition) forms a thin, hard layer that improves abrasion resistance without significantly altering the substrate’s fracture toughness, meaning longer usable life in many turning tasks. Practical system integration and secure clamping for shop use Integration into a turning system requires the correct matching of insert form, relief angle (11°), tolerance class and clamping style. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for positive location and stable fixing in conventional external holders or boring bars. The plate thickness of 2.38 mm and the triangular format (size 09) make it suitable for both external and internal turning where access and rigidity permit. Clear compatibility reduces downtime and supports quick changeover in batch production. Chip control, single-sided breaker and selection guidance This insert is equipped with a single-sided chipbreaker, engineered to produce short, manageable chips in many rostfreier Stahl turning scenarios. Selecting the correct chipbreaker and grade depends on workpiece material, machining strategy and machine stability: the AH6235 grade is intended where a tougher substrate is required rather than the hardest possible coating, giving improved resistance to notch formation at the edge. Where chip control or surface finish is critical, pairing this insert with a suitable cutting parameter set and a rigid setup will yield the best outcomes. For machining tasks on rostfreier Stahl where consistent edge security is required, contact Metav Werkzeuge to request the Tungaloy TPMT090208 AH6235 insert or discuss optimal holder selection and cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903503 Manufacturer SKU: TUN6903503 Dealer SKU: 6903503-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMT090208 AH6235 Facts Geometry angle: 60° Relief angle: 11° Corner radius: 0.8 mm Thickness: 2.38 mm Size: 09 Special features Carbide substrate with PVD coating AH6235 Single-sided chipbreaker Triangular plate form Cylindrical hole with one-sided countersink (40°–60°) Intended application: Turning; suitable for interrupted cuts and rostfreier Stahl ISO-format insert; compatibility by form, tolerance, fixation and thickness FAQ What types of turning operations suit this insert best? The TPMT090208 AH6235 insert is intended for both external and internal turning, especially where interrupted cuts occur or when machining rostfreier Stahl with variable cutting conditions. How does the AH6235 grade behave on rostfreier Stahl? AH6235 is a tougher PVD-coated carbide grade designed to resist edge breakout and to provide stable wear behaviour when turning rostfreier Stahl, giving reliable tool life in demanding cuts. Which holder characteristics are required for correct use? A holder matching the ISO triangular form, the 11° relief angle, the plate thickness (2.38 mm) and the fixation style for a cylindrical hole with countersink is required to ensure secure clamping and repeatable positioning of the insert. Can this insert produce a good surface finish? With correct cutting data, machine rigidity and appropriate feed selection, the TPMT090208 AH6235 can deliver consistent surface quality; its chipbreaker and PVD coating help control chips and wear for steady finishes. What information identifies the exact part? The Tungaloy article number is 6903503 and the manufacturer SKU is TUN6903503 for ordering and stock verification Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of universal AH725 grade, PVD-coated carbide and a compact triangular geometry for consistent turning performance and extended tool life; order the TPMT 090208 AH725 inserts directly via Metav Werkzeuge or contact our specialists for application guidance. TPMT 090208 AH725 – Tungaloy triangular turning insert, 60°, PVD-coated carbide The TPMT 090208 AH725 is an ISO triangular indexable insert for turning, designed for reliable machining of steel and rostfreier Stahl with a one-sided chipbreaker for controlled chip formation. PVD-coated carbide AH725 for universal use Triangular 60° insert for versatile turning 0.8 mm corner radius for fine finishing Countersunk hole for secure clamping Consistent cutting performance across mixed steels The PVD-coated carbide grade AH725 delivers a balance of hardness and toughness that supports stable cutting on a wide range of steels, including rostfreier Stahl. The PVD coating increases surface hardness and thermal resistance, reducing flank wear at elevated temperatures and extending edge life. For shops processing varied workpiece materials, this combination translates into fewer indexings and more predictable cycle times, enhancing overall productivity without compromising surface quality. Secure clamping and straightforward compatibility The triangular geometry with a countersunk hole and 40°–60° single-sided countersink provides positive seating and repeatable clamping in compatible holders. Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the standardised ISO shape ensures interchangeability with ISO-compliant external holders and boring bars. A stable clamping interface reduces vibration and enables consistent cutting forces, which is particularly beneficial when using smaller tools or machines with limited rigidity. Improved process security and chip control Equipped with a one-sided chipbreaker, the insert supports controlled chip formation and evacuation during turning operations. The AH725 grade is described as outburst-resistant, meaning it is engineered to resist edge chipping under interrupted cuts and varying cutting conditions. This focus on process security is valuable in batch production or mixed-run environments where reproducible results and reduced scrap rates matter. The result is predictable tool life and fewer unscheduled tool changes. Compact dimensions for precision finishing and general turning The insert’s 0.8 mm corner radius is well suited to produce fine surface finishes while retaining adequate edge strength for light to moderate depths of cut. With a plate thickness of 2.38 mm and a plate size designation of 09, the geometry is compact yet robust for general external and internal turning tasks. The 11° relief angle and the 60° cutting angle provide favourable cutting engagement for a wide range of turning operations; selecting the appropriate chipbreaker and cutting parameters will further optimise material removal and surface quality. For application advice or to order genuine Tungaloy TPMT 090208 AH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6864991 SKU: 6864991-Tungaloy Manufacturer SKU: TUN6864991 Model series: ISO turning indexable inserts Designation: TPMT090208 AH725 Manufacturer: Tungaloy Key measurements Size: 09 Corner radius: 0.8 mm Relief angle: 11° Thickness: 2.38 mm Cutting angle: 60° Countersink angle: 40°–60° Features Triangular plate form One-sided chipbreaker PVD-coated carbide grade AH725 Suitable for steel and rostfreier Stahl Cylindrical hole with single-sided countersink ISO-standard indexable insert series FAQ What materials is this insert suited to machine? The TPMT 090208 AH725 grade is formulated for machining a broad range of steels and rostfreier Stahl, offering reliable wear resistance and reduced chipping. How does the PVD coating benefit tool life? The PVD coating on the insert increases surface hardness and thermal resistance, which helps the cutting edge retain its geometry longer under higher temperatures and abrasive conditions. Which holders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; use ISO-compliant turning holders or boring bars matched to the TPMT 090208 geometry. What is the advantage of the one-sided chipbreaker? The one-sided chipbreaker promotes controlled chip formation for many turning tasks, improving chip evacuation and contributing to process security during continuous or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated carbide AH725 grade with the ISO triangular geometry and a 0.8 mm corner radius delivers dependable chip control and process stability for diverse turning tasks; order the TPMT090208 AH725 insert via Metav Werkzeuge or consult the specialists for application guidance. TPMT090208 AH725 — ISO turning insert for external and internal turning, Tungaloy A TPMT090208 AH725 insert engineered for ISO-standard turning operations, offering robust edge security and universal performance in steel and stainless steel applications. ISO triangular insert TPMT090208, 11° relief PVD-coated carbide AH725 for steel & stainless 0.8 mm corner radius, reliable edge strength Cylindrical hole with one-sided countersink Consistent chip control from geometry and chipbreaker The triangular plate design with a single-sided chipbreaker provides stable chip formation and repeatable cutting behaviour, reducing vibration and improving surface finish. The fixed 11° clearance and the insert’s geometry promote predictable cutting forces; this leads to fewer rejects and smoother production cycles. Opting for a geometry-matched indexable plate enhances tool life by ensuring that the cutting edge meets holder specifications, which is especially valuable in small tools and high-precision turning. Coating and substrate tailored for mixed-steel workloads The combination of a PVD-coated surface and a carbide substrate in the AH725 grade gives a balance of toughness and wear resistance suited to both steel and stainless steel. PVD deposition forms a thin, adherent layer that reduces built-up edge and improves thermal resistance at the cutting edge. In practice, this means longer intervals between indexings and steadier dimensional control when machining variable materials, where a universal, break-resistant grade reduces the need for frequent insert changes. ISO compatibility and secure mounting for reliable indexing Manufactured to ISO plate dimensions, the insert’s fit depends on form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping in compatible holders. Verifying holder compatibility by checking these parameters prevents misalignment and premature wear. For both external and internal turning, the standardised specification simplifies stocking and replacement procedures and supports modular tool system planning. Small dimensions, big impact on uptime The modest 2.38 mm plate thickness and 0.8 mm corner radius combine to give a strong edge while permitting fine finish capability on smaller tools. The universal nature of the grade and the single-sided chipbreaker help reduce inventory complexity: fewer grades and geometries cover a wider range of tasks. When process security is the priority, these small technical choices reduce downtime, minimise set-up adjustments and support consistent output quality. For high process security and broad material coverage, request the Tungaloy TPMT090208 AH725 turning insert via Metav Werkzeuge or contact our specialists for tailored recommendations Technical data Article number: 6856674 Manufacturer SKU: TUN6856674 SKU: 6856674-Tungaloy Label: TPMT090208 AH725 Tungaloy-Wendeplatte Core dimensions Angle: 60° Clearance angle: 11° Corner radius: 0.8 mm Thickness: 2.38 mm Size: 09 Special features Material: carbide Coating: PVD Grade: AH725 Plate shape: triangular Chipbreaker: single-sided Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Application: Turning Compatible with ISO-standard turning holders Suitable for steel and stainless steel FAQ What materials is this insert suitable for? The TPMT090208 AH725 insert from Tungaloy is formulated for machining steel and stainless steel, offering a universal balance of toughness and wear resistance. How is the insert secured in the holder? Mounting uses the cylindrical centre hole with a one-sided countersink (40°–60°), ensuring correct indexing and a secure clamp in holders designed for ISO triangular plates. What benefits does the AH725 grade provide? The AH725 PVD-coated carbide grade provides a break-resistant edge and reliable process security across varying steels, reducing the frequency of insert changes in mixed-material production. Can the insert be used for both external and internal turning? Yes, the ISO-standard triangular format and the specified geometry make it suitable for both external and internal turning applications when paired with an appropriate holder. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and helps absorb intermittent cutting forces, improving tool life while still enabling good surface finish on many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD-coated AH725 carbide, precise ISO geometry and a 0.8 mm corner radius for consistent, reliable turning results. For catalogue orders or machining advice, order the TPMT090208 AH725 indexable insert directly via (Metav Werkzeuge) or contact the consultants for application support. TPMT090208 AH725 – ISO indexable insert for turning, PVD-coated carbide, Tungaloy TPMT090208 AH725 is an ISO-format triangular indexable insert designed for secure external and internal turning where process stability and predictable chip control are required ISO TPMT090208 fits standard holders AH725 PVD-coated carbide for steel and stainless 0.8 mm corner radius for stable cutting One-sided chipbreaker for controlled chips Higher process security with PVD-coated carbide The insert’s PVD-coated AH725 grade delivers a balance of wear resistance and fracture toughness, making it suitable for mixed batches and applications with varying material demands. The PVD coating improves edge life under intermittent cuts and raises thermal stability, which reduces unexpected tool changes and downtime. With its carbide substrate, the component provides predictable tool life in shop-floor conditions, so cycle times remain steady and regrinding intervals can be planned reliably. Consistent chip control and geometry for dependable results Engineered as an ISO-indexed triangular insert, the geometry and one-sided chipbreaker promote controlled chip formation during both external and internal turning. The defined 11° relief angle and 60° included angle support effective cutting engagement and reduce the tendency for built-up edge on stainless steels. This results in improved surface finish and fewer interruptions due to inconsistent chips, which is particularly beneficial for operators handling small tools or variable feed conditions. Practical dimensions and mounting that speed up changeovers With a plate thickness of 2.38 mm, a size 09 designation and a 0.8 mm corner radius, the insert provides a compact but robust cutting edge for fine turning and profile work. The insert is specified with a hole—a cylindrical hole with a single-sided countersink (40°–60°)—allowing straightforward clamping in compatible ISO holders and minimising setup time. Standardised dimensions mean replacements are immediately compatible with holders that accept TPMT090208 formats, simplifying inventory and reducing machine downtime. Universal grade for mixed-material workflows The AH725 grade is described for universal, break-resistant performance on steel and stainless steels, making this insert a useful choice where workpieces or batch materials change frequently. The combination of toughness and wear resistance reduces the risk of unexpected edge chipping on unstable setups while still preserving acceptable wear rates in continuous operations. For shops seeking a single, reliable indexable solution across a range of steels, this insert offers a productive compromise between life and edge security. For application-specific recommendations and availability of Tungaloy’s TPMT090208 AH725 indexable inserts, please contact Metav Werkzeuge for technical guidance and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856723 Manufacturer SKU: TUN6856723 SKU: 6856723-Tungaloy Model series: ISO turning inserts Core data Corner radius: 0.8 mm Plate thickness: 2.38 mm Size: 09 Relief angle: 11° Included angle: 60° Special features Shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Grade/coating: AH725, PVD-coated carbide Material: carbide Application: external and internal turning; universal for steel and stainless steels FAQ What materials is the TPMT090208 AH725 best suited for? The TPMT090208 AH725 insert is specified for steel and stainless steels; the AH725 PVD-coated carbide grade provides a compromise of wear resistance and toughness suited to mixed-material production. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and improves surface finish in turning operations; it provides greater stability on short, rigid setups and reduces the risk of edge chipping on interrupted cuts. Is the insert compatible with standard ISO holders? Yes, the TPMT090208 follows ISO dimensions and the cylindrical hole with single-sided countersink is designed for secure clamping in compatible ISO-format holders. What benefits does the AH725 PVD coating deliver? The PVD coating on the AH725 grade enhances thermal resistance and reduces abrasive wear, extending edge life under higher cutting temperatures and intermittent cutting conditions. Can this insert be used for both external and internal turning? The geometry and chip control features of this triangular insert make it suitable for both external and internal turning tasks, provided the holder and setup match the ISO TPMT090208 format. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet AT9530, a triangular 60° form and a 0.8 mm corner radius for improved surface finish, consistent wear and straightforward holder compatibility; order the TPMT090208 AT9530 insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT090208 AT9530 triangular indexable turning insert, coated cermet, Tungaloy TPMT090208 AT9530 is a triangular, ISO‑standard indexable insert designed for precision turning and light finishing operations on steel. Coated cermet grade AT9530 Triangular 60° insert form 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Delivering consistent surface finish with a coated cermet grade The combination of a coated cermet cutting material and the AT9530 grade is aimed at achieving a high‑quality surface finish during finishing and light machining of steel. The AT9530 coating promotes even wear across the cutting edge, reducing the need for frequent index changes and helping to maintain dimensional stability over longer runs. By prioritising surface integrity, the insert supports processes where finish and repeatability are decisive, making it suitable for small‑batch precision components as well as higher‑volume finishing passes. Secure clamping and ISO compatibility for reliable set‑ups Compatibility with the toolholder is governed by precise factors such as form, clearance angle, tolerance class, fastening method, size and thickness. The triangular 60° geometry combined with a cylindrical hole and single‑sided countersink (40°–60°) ensures secure clamping in compatible holders and boring bars. Specifying the correct holder and matching shim or clamp prevents movement under cutting forces and maintains repeatable positioning. Systematically checking these parameters simplifies set‑up and reduces downtime when replacing inserts. Geometry tailored to finishing cuts and controlled chip formation With a 0.8 mm corner radius and a plate thickness of 2.38 mm, the insert is optimised for light engagement and finishing feed rates; the modest radius balances edge strength with the ability to produce fine surface textures. The one‑sided chipbreaker supports predictable chip formation in finishing cuts, while the triangular shape offers three usable corners per insert, improving cost efficiency. In practice, this geometry helps stabilise cutting action and contributes to uniform wear distribution when paired with appropriate feeds and depth of cut for finishing operations. For tailored advice on integrating the TPMT090208 AT9530 insert into machining processes or to request a quotation, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 and our technical team will assist with holder selection and application recommendations Technical data Article number: 6773747 Manufacturer SKU: TUN6773747 SKU: 6773747-Tungaloy Product name: TPMT090208 AT9530 Tungaloy insert Model series: ISO turning indexable inserts Core specifications Insert size: 09 Thickness: 2.38 mm Cutting angle: 60° Corner radius: 0.8 mm Clearance angle: 11° Hole style: cylindrical hole with single‑sided countersink (40°–60°) Materials & features Coating / grade: AT9530 Cutting material: coated cermet Chipbreaker: one‑sided Insert shape: triangular Application: turning (external and internal) System components: ISO insert, compatible outer holder or boring bar, shim/clamp and replacement screws Typical use: finishing and light machining of steel with emphasis on surface finish and uniform wear FAQ What materials is this insert intended for? This insert is specified for finishing and light machining of steel; the AT9530 coated cermet is optimised for achieving superior surface quality and even wear when used on steel. How does the 0.8 mm corner radius influence performance? A 0.8 mm corner radius provides a compromise between edge strength and fine surface generation; it helps to smooth the turned surface while retaining sufficient edge stability for finishing passes. Which holder characteristics must be checked for compatibility? Compatibility depends on form, clearance angle (11°), tolerance class, fastening method, size (09) and thickness (2.38 mm); matching these parameters to an ISO‑compliant holder ensures correct seating and clamping of the insert. Why is the hole and countersink design important? The cylindrical hole with a single‑sided countersink (40°–60°) secures the insert under clamping forces and aligns the insert consistently in the pocket, contributing to repeatable cutting geometry and safer tool operation. Can this insert be used for internal and external turning? Yes — the model series and geometry support both external and internal turning, provided the selected holder and chipbreaker are appropriate for the intended turning operation and workpiece stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of reliable wear resistance, precise ISO compatibility and a compact corner radius to maintain consistent part quality and predictable tool life. Order the insert directly via Metav Werkzeuge or contact their team for application advice and availability. TPMT 090208 GH730 – ISO indexable turning insert for turning applications, 60° triangle, with hole — Tungaloy TPMT090208 GH730 is an ISO‑standard triangular indexable insert engineered for general external and internal turning, offering a one‑side chipbreaker and secure clamping via a cylindrical hole with countersink. ISO triangle insert 60° geometry GH730 carbide grade for wear resistance 0.8 mm corner radius for finishing Cylindrical hole with 40°–60° countersink Productivity gains from a wear‑resistant carbide grade The GH730 grade, supplied in cemented carbide, balances wear resistance with edge toughness to extend cutting intervals in mixed‑material production. Selecting a robust grade reduces unplanned tool changes and stabilises machining processes, which translates into fewer interruptions and lower per‑part tooling cost. The controlled chip formation of the single‑side chipbreaker supports swarf evacuation in both light and medium cutting depths, contributing to a smoother cycle time and more consistent surface quality. ISO compatibility and secure clamping for reliable repeatability The TPMT090208 geometry conforms to ISO form and sizing for triangular turning inserts, ensuring compatibility with matching ISO toolholders when form, clearance angle, tolerance class, fastening and plate thickness are respected. Key dimensions — 11° clearance angle and a 2.38 mm plate thickness — determine seat fit and clamping stability. The insert’s cylindrical hole with a single‑side countersink (40°–60°) gives a repeatable seating position and secure retention under varying cutting forces, reducing vibration and producing predictable component tolerances. Practical benefits: surface finish, tool life and application fit A 0.8 mm corner radius provides a good compromise between edge strength and fine surface finish for finishing and semi‑finishing passes. The single‑side chipbreaker is optimised for turning operations, helping to break chips and protect the cutting edge under interrupted cuts. For production planning, the combination of the triangular 60° geometry and GH730 grade suits a broad material range in turning, enabling consolidated tooling inventories and simpler grade selection for mixed‑batch work, which supports leaner workflow and higher throughput. For machining tasks that demand consistent edge stability and ISO compatibility, request availability of the Tungaloy TPMT090208 GH730 insert from Metav Werkzeuge and receive practical application guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6821009 Manufacturer article number: 6821009 Manufacturer SKU: TUN6821009 SKU: 6821009-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Insert size: 09 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Insert angle: 60° Designs / Special features Triangular plate shape One‑side chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Grade: GH730 (Tungaloy carbide) Application: turning ISO‑standardised geometry FAQ What materials is this insert suitable for? The TPMT090208 GH730 insert is designed for turning and delivers good performance across a broad material range thanks to the GH730 carbide grade, offering a balance between wear resistance and toughness. How does the chipbreaker affect machining? The single‑side chipbreaker controls chip formation and evacuation during turning, which improves surface finish and reduces the risk of chip entanglement on external and internal turning tasks. What determines holder compatibility for this insert? Compatibility depends on ISO form, clearance angle, tolerance class, fastening type, size and plate thickness; the listed dimensions (11° clearance, 2.38 mm thickness) indicate the required holder seat and clamping arrangement. Can this insert be used for finishing operations? Yes, the 0.8 mm corner radius is suitable for finishing and semi‑finishing passes, providing a compromise between edge strength and fine surface finish. What fastening does the insert use? The insert features a cylindrical hole with a single‑side countersink (40°–60°) that secures the plate in standard ISO clamping systems and ensures repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (GT9530), a precise 0.8 mm corner radius and ISO conformity for consistent finishing performance in turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for holder selection and process optimisation. TPMT 090208 GT9530 triangular turning insert by Tungaloy — coated cermet, 60° geometry The TPMT090208 GT9530 is an ISO-standard triangular insert designed for finishing to light universal turning of steel, offering enhanced surface quality and extended tool life under stable machining conditions. Coated cermet grade GT9530 60° triangular form for versatile turning 0.8 mm corner radius for fine finishing Consistent surface finish and wear-resistant cutting body The coated cermet GT9530 provides a balance of hardness and toughness that favours excellent surface finish and prolonged tool life in finishing and light turning of steel. Cermet combines ceramic hardness with metal-like toughness, so the insert resists abrasive wear while maintaining cutting-edge integrity at moderate speeds. With a wear-resistant cutting body, the insert reduces the frequency of tool changes and supports steady production runs, which translates into fewer interruptions and improved process reliability. Clear ISO compatibility and mounting parameters for secure clamping As an ISO triangular insert, compatibility with the toolholder depends on the insert’s shape, relief angle, tolerance class, clamping method, size and thickness. Key data points are a 60° included angle, an 11° relief (clearance) angle, a 0.8 mm corner radius and a plate thickness of 2.38 mm. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for positive seating; these details ensure correct locating and secure fixation in matching holders. When selecting a holder, match the insert seat geometry and tolerances to avoid runout and ensure repeatable positioning. Productivity gains through stable cutting and reliable chip control The single-sided chipbreaker and the GT9530 coated cermet grade are intended for stable machining conditions, where consistent cutting forces and controlled chip formation support longer tool life. Improved chip control reduces secondary operations and machine downtime, while the stable cutting edge contributes to a predictable surface quality. For production environments focused on repeatability, the insert’s characteristics help maintain cycle-time consistency and lower the total cost of ownership through fewer tool interventions. Practical application advice and system composition Designed primarily for external and internal turning, the insert performs best when combined with an appropriate holder and the correct chipbreaker choice for the workpiece material. The recommended system comprises the ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws for reliable clamping. For finishing passes on steel, pair the insert with moderate feed rates and cutting speeds suited to the machine rigidity and coolant strategy; this preserves the cermet coating’s integrity and secures the expected surface results. Contact Metav Werkzeuge today for expert guidance on selecting holders, chipbreakers and cutting parameters for the TPMT090208 GT9530, or request technical data sheets via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998360 SKU: 6998360-Tungaloy Manufacturer SKU: TUN6998360 Numbers / Core technical data Geometry: 60° included angle Clearance (relief) angle: 11° Corner radius: 0.8 mm Thickness: 2.38 mm Size designation: 09 Designs / Special features Coated cermet grade GT9530 Single-sided chipbreaker With cylindrical hole + single-side countersink (40°–60°) ISO-series triangular insert Recommended for finishing to light universal turning of steel System: ISO insert, matching holder, shim/clamp and replacement screws FAQ What materials is this insert suitable for? The TPMT090208 GT9530 is formulated for machining steel and is best applied in finishing to light universal turning operations where surface quality and longer tool life are priorities. How does the GT9530 grade affect performance? The GT9530 coated cermet delivers improved wear resistance and surface finish compared with conventional grades, so the TPMT090208 achieves longer intervals between indexings in stable cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder seat geometry, relief angle and tolerance class; use holders designed for ISO triangular inserts with the correct seat for 09-size TPMT inserts to ensure secure clamping of the TPMT090208 GT9530. Is the insert suitable for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning when mounted in an appropriate external holder or boring bar that provides sufficient rigidity for finishing passes with the TPMT090208 GT9530. What does the hole and countersink specification mean for mounting? The TPMT090208 is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure a positive seating and correct clamping orientation in compatible inserts seats. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 GT9530 Wendeplatten - Tungaloy
A cost-effective solution for finishing and light general turning, combining the GT9530 coated cermet grade with a triangular form and a 0.8 mm corner radius for stable surface quality and extended tool life; order directly via Metav Werkzeuge or consult the specialists for application advice. TPMT090208 GT9530 – Tungaloy ISO turning insert for finishing and light general turning The TPMT090208 GT9530 is an ISO‑standard triangular indexable turning insert, engineered for finishing to light general turning of steel where surface quality and extended wear resistance are required. Coated cermet grade GT9530 Triangular 09 form, 0.8 mm corner radius 11° clearance angle, 2.38 mm thickness Cylindrical hole with 40°–60° countersink Consistent surface finish and longer cutting intervals The coated cermet GT9530 is specified for wear‑resistant finishing and light universal turning of steel under stable machining conditions. The combination of the fine, wear‑resistant coating and the substrate yields a consistent surface finish and longer tool life compared with typical uncoated grades. This makes the insert particularly suitable for jobs where minimising part rework and maintaining dimensional consistency are priorities. Technical terms such as "coated cermet" indicate a ceramic–metal composite coating that balances hardness and toughness to reduce flank wear during finishing passes. Secure clamping and straightforward compatibility checks Compatibility with holders is governed by form, clearance, tolerance class, fastening, size and thickness; the triangular 09 form and 2.38 mm thickness ensure straightforward pairing with ISO‑compliant external holders or boring bars. The insert features a cylindrical hole plus a one‑sided countersink (40°–60°) for reliable seating and repeatable clamping. When planning a tool setup, verify the holder’s seat geometry and fastening method to achieve the intended cutting angle and to preserve insert life. Engineered chip control for steady machining A one‑sided chipbreaker is integrated to support stable chip formation during finishing cuts, reducing the risk of entanglement and facilitating controlled chip evacuation. In practical terms, this helps maintain uninterrupted cycle times and reduces manual chip handling. For operations that demand consistent surface integrity—such as component finishing and light turning—the chip control characteristics of this grade contribute to process stability and predictable results. Design details that support process reliability Key design parameters such as the 0.8 mm corner radius and the included angle of 60° influence cutting mechanics: the radius supports better surface finish while the geometry balances edge strength and accessibility to small radii features. The ISO‑standard designation ensures the insert conforms to widely used form and tolerance classes, simplifying procurement and interchangeability across ISO‑compatible tool systems. The insert is supplied as part of a system concept that includes the matching holder, shim/clamp set and spare screws where required, enabling a complete and reliable tooling solution. Discuss application requirements with Metav Werkzeuge to confirm suitability of the Tungaloy GT9530 insert for the intended turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998368 SKU: 6998368-Tungaloy Manufacturer SKU: TUN6998368 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Key dimensions Corner radius: 0.8 mm Insert size: 09 Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Special features Coating/grade: GT9530 (coated cermet) Triangular insert (TPMT) Cylindrical hole + one‑sided countersink (40°–60°) One‑sided chipbreaker Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert suited for? The TPMT090208 GT9530 insert is intended primarily for steel machining in finishing and light universal turning, using the wear‑resistant GT9530 coated cermet to deliver improved surface finish and extended wear life. How does the hole and countersink affect mounting? The cylindrical hole with a one‑sided countersink (40°–60°) provides secure seating and repeatable clamping in ISO holders, improving positional stability and torque transmission during tight clamping. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO form and dimensional conventions; compatibility depends on matching the holder’s seat geometry, clearance angle and tolerance class with the insert’s 09 form and 2.38 mm thickness. What machining benefits does the GT9530 grade deliver? The GT9530 coated cermet offers wear resistance suited to finishing cuts and light general turning, providing consistent surface integrity and longer cutting intervals under stable operating conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 NS9530 Wendeplatten - Tungaloy
Take advantage of a dedicated finishing grade that combines low cutting forces and a sharp cutting edge for superior surface quality; the insert’s ISO-compliant geometry and secure countersunk hole ensure repeatable clamping and stable turning cycles. Order or request technical advice from Metav Werkzeuge for precise application support. TPMT090208 NS9530 Tungaloy turning insert — triangular ISO finishing grade with 0.8 mm radius The TPMT090208 NS9530 Tungaloy insert is an ISO-standard triangular turning insert designed for finishing operations on steel, offering a sharp edge geometry and a one-sided chipbreaker for continuous cuts. ISO triangular insert for turning Uncoated cermet grade NS9530 for finishing Sharp cutting edge for high surface finish 11° clearance angle for low cutting forces Countersunk hole for secure clamping High-precision finishing with low cutting forces The insert is manufactured in the NS9530 uncoated cermet grade, optimised for finishing steel with a sharp cutting edge and reduced cutting forces. This combination favours continuous cutting conditions and small depths of cut, delivering a smoother machined surface and consistent dimensional results. For operations where surface integrity and tight tolerances matter, the material pairing and edge geometry reduce the need for secondary finishing, improving process throughput and component quality. Stable clamping and ISO compatibility for repeatable results Designed as an ISO-compliant triangular insert, the component features a central clamping hole with a cylindrical hole and single-sided countersink (40°–60°) to secure the insert reliably in compatible external holders or boring bars. The standardised form, size and thickness ensure quick replacement and predictable seating, which supports process stability and reduces downtime related to insert seating and alignment. Controlled cutting contact for superior surface finish With an edge radius of 0.8 mm and an 11° clearance angle, the geometry reduces built-up edge and minimises rubbing during finishing cuts. These specifications help maintain a high surface finish while keeping cutting forces low, which is particularly beneficial when machining long, slender workpieces or assemblies that are sensitive to vibration. The one-sided chipbreaker supports chip control under continuous feed conditions, lowering the risk of surface damage from erratic chip flow. Practical application notes and machining guidance The insert is specified for turning and should be paired with a suitable holder and torque-controlled clamping to preserve the edge integrity. The one-sided chipbreaker and uncoated cermet grade are best suited to stable setups and steady feeds; choose a matching holder form, free clearance, tolerance class and screw type to ensure full compatibility. For mixed-material runs or interrupted cuts, select an alternative grade or chipbreaker adapted to the specific workpiece material and cutting conditions. Metav Werkzeuge’s technical team can advise on holder selection and recommended cutting data to match the application. Contact Metav Werkzeuge for tailored cutting data and holder compatibility for the Tungaloy NS9530 finishing insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998544 SKU: 6998544-Tungaloy Manufacturer SKU: TUN6998544 Manufacturer article number: 6998544 Facts Insert designation: TPMT090208 Size: 09 Corner radius: 0.8 mm Plate thickness: 2.38 mm Included hole: with hole (cylindrical + countersink 40°–60°) Clearance (relief) angle: 11° Geometry angle: 60° Special features Grade: NS9530 (uncoated cermet) Plate form: triangular Chipbreaker: one-sided Intended application: turning (finishing steel) System: ISO turning insert, compatible with external holder or boring bar Typical assembly: insert, matching holder, support pad/clamp set and replacement screw FAQ What materials is this insert best suited for? The TPMT090208 NS9530 is formulated as a finishing grade for steel; the uncoated cermet composition gives a sharp edge and low cutting forces suitable for continuous turning of steel components. Which holders are compatible with this insert? Compatibility depends on form, clearance, tolerance class, clamping method, size and thickness; the TPMT090208 fits ISO triangular holders designed for 09-size inserts and requires a clamping screw that matches the countersunk hole geometry. How does the 0.8 mm radius affect surface quality? A 0.8 mm radius provides a favourable balance between edge strength and smoothness, improving surface finish while maintaining adequate resistance to edge chipping during finishing cuts. Is coolant required when using the NS9530 grade? For many finishing operations the NS9530 uncoated cermet performs well under dry and low-coolant conditions due to its sharp edge, but coolant use should be chosen based on material, machine rigidity and cycle specifics. What is the manufacturer SKU for ordering and traceability? The manufacturer SKU is TUN6998544 and the article number is 6998544 for the TPMT090208 NS9530 Tungaloy turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet NS9530 and precise ISO geometry for efficient finishing operations; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT 090208 NS9530 Tungaloy turning insert – uncoated cermet for finishing TPMT090208 NS9530 is an ISO-standard triangular indexable insert intended for finishing steel in turning applications, offering a sharp edge and consistent surface quality Uncoated cermet finishing grade NS9530 Sharp cutting edge for high surface finish ISO triangle 60° with 0.8 mm corner radius Compatible with ISO turning holders Optimised finishing performance for steel The uncoated cermet NS9530 grade is designed specifically as a finishing option for steel, providing a sharp cutting edge and low cutting forces that favour continuous cutting and fine surface results. The composition of the grade reduces built-up edge tendencies and helps maintain a consistent geometry over multiple parts, which translates into fewer in-process adjustments and a steadier production flow. For operations with small depths of cut and emphasis on surface integrity, this grade offers a clear performance advantage while keeping cutting forces moderate. Geometry and mounting that ensure stable results The insert’s ISO 60° triangular geometry paired with a 0.8 mm corner radius and 11° relief supports secure clamping and repeatable positioning in standard holders. The 2.38 mm thickness contributes to rigidity during finishing passes, and the specification "with hole" plus a cylindrical hole with one-sided countersink (40°–60°) ensures reliable fastening and straightforward replacement. Compatibility to a given holder is determined by form, relief angle, tolerance class, size and thickness; matching these parameters avoids seating issues and secures consistent cutting behaviour. Predictable chip control and surface quality in production A one-sided chipbreaker tuned for finishing promotes steady chip formation under continuous cut conditions, reducing vibration and supporting a finer surface finish. Selecting this chipbreaker and the NS9530 grade for stable setups improves process predictability and often extends time between index changes. For complex assemblies or high-mix production where surface quality is critical, this combination reduces rework and supports stable throughput. If further technical data or application guidance is required, Metav Werkzeuge provides application support by e-mail or phone. Contact Metav Werkzeuge for tailored recommendations on Tungaloy finishing inserts and to arrange supply; e-mail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and ordering. Technical data Article number: 6998536 Manufacturer SKU: TUN6998536 Designation: TPMT090208 NS9530 Tungaloy turning insert Model series: ISO-Drehwendeschneidplatten Application: Turning Key figures Geometry: 60° Corner radius: 0.8 mm Relief angle: 11° Thickness: 2.38 mm Size designation: 09 Materials & features Grade: NS9530 (uncoated cermet) Substrate: carbide Chipbreaker: one-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular FAQ What materials is this insert best suited for? The NS9530 uncoated cermet grade is optimised for finishing steel, offering a sharp edge and low cutting forces suitable for continuous cutting. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the TPMT090208 NS9530 is an ISO 60° triangular insert intended for standard ISO turning holders. How does the chipbreaker affect machining? The one-sided chipbreaker promotes steady chip control under finishing conditions, which helps reduce vibration and improves surface finish when using the NS9530 grade. Is the insert supplied with a fastening hole and what is its style? Yes, the insert is supplied with hole, featuring a cylindrical hole plus a single-sided countersink designed for 40°–60° seating. How does the 0.8 mm corner radius influence surface quality? A 0.8 mm corner radius balances edge strength and fine surface finish for finishing passes, giving predictable surface integrity while minimising edge fragility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5115 together with the 11° relief angle and 0.8 mm corner radius for reliable chip control and extended edge stability; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific guidance. TPMT 090208 T5115 — Turning indexable insert (triangular, 11° relief) by Tungaloy TPMT090208 T5115 is an ISO triangular indexable insert engineered for general turning, optimised for machining cast iron with a balance of wear resistance and cutting-edge stability CVD-coated carbide for consistent wear resistance Universal grade optimised for cast iron Triangular insert with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink High-performance cutting from the CVD-coated carbide grade The CVD-coated carbide composition of this insert delivers a reliable combination of wear resistance and edge strength, making it particularly well suited to machining cast iron. The T5115 grade is designed as a universal solution for a range of turning tasks, providing predictable tool life and steady performance. With a 0.8 mm corner radius and an 11° relief angle, the geometry reduces edge chipping under interrupted cuts while maintaining a favourable balance between strength and cutting economy. This contributes directly to fewer tool changes and more stable production sequences. Controlled chip formation and secure fastening for consistent operation Built with a single-sided chipbreaker and a precise hole design — cylindrical with a one-sided countersink (40°–60°) — the insert promotes stable chip control and reliable clamping. The triangular plate form provides multiple indexable edges, allowing rapid indexing to fresh cutting corners and thus better utilisation of each insert. Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure seating in the toolholder and repeatable results. The design supports efficient swarf evacuation and a steady cutting process, which in turn helps reduce cycle-time variation. Practical setup, system components and workshop benefits The insert integrates into a common ISO system comprising the indexable insert, a matching external holder or boring bar, a clamp pad/fastening kit and replacement screws. The 2.38 mm plate thickness and ISO size 09 strike a good compromise between rigidity and versatility for many turning applications. Using the appropriate chipbreaker and grade according to the workpiece material and machining conditions leads to improved surface finish and extended tool life. For operations prioritising repeatability and process security, the combination of Tungaloy technology and the ISO standard form helps maintain consistent results across batches and operators. For application-specific advice and availability of Tungaloy turning inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid support and ordering Technical data Article number: 6864371 SKU: 6864371-Tungaloy Manufacturer SKU: TUN6864371 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Thickness: 2.38 mm Size: 09 ISO designation: 090208 Special features CVD-coated carbide grade T5115 Universal grade for cast iron Single-sided chipbreaker Triangular plate form With hole: cylindrical + one-sided countersink (40°–60°) Compatible with ISO external holders and boring bars System: insert, holder, clamp pad, replacement screws FAQ Which materials is the insert best suited for? The TPMT090208 T5115 indexable insert (Tungaloy turning insert, SKU 6864371-Tungaloy) is optimised for machining cast iron where a balance of wear resistance and edge stability is required. How is compatibility with a toolholder determined? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; check that the holder matches the insert’s ISO form, 11° relief and 2.38 mm plate thickness before mounting. What does the T5115 designation indicate? T5115 denotes the CVD-coated carbide grade selected for universal use on cast iron, combining wear resistance with stable cutting-edge behaviour under varied turning conditions. How many cutting edges are available on this triangular insert? The triangular shape provides multiple indexable cutting corners, enabling quick re-indexing to a fresh edge and better overall utilisation of each insert. How is the insert secured in the holder? The insert is secured via a cylindrical hole with a one-sided countersink (40°–60°) in combination with the appropriate clamp pad and screws, ensuring firm seating and repeatable positioning for reliable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide and a precise 0.8 mm corner radius for consistent performance in rostfreier Stahl turning; combine high wear resistance with ISO compatibility and stable clamping for uninterrupted production. Order the insert directly via Metav Werkzeuge or ask the consultants if further application support is required. TPMT090208 T6215 ISO triangular turning insert for rostfreier Stahl — Tungaloy TPMT090208 T6215 is an ISO-standard triangular indexable insert for external and internal turning, designed for rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide for wear resistance ISO triangular shape with 60° included angle 11° relief and 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Durable grade and cutting-edge coating improve tool life The combination of CVD-coated carbide and the T6215 grade delivers enhanced wear resistance and reliable edge stability when machining rostfreier Stahl. CVD (chemical vapour deposition) creates a uniform, hard surface layer that reduces flank wear and adhesion at the cutting edge; this translates into longer life and fewer indexings for the insert. The result is reduced downtime and steadier process output in production runs where consistent surface finish and dimensional accuracy matter. Geometry tailored for repeatable clamping and predictable results A triangular plate with a 60° included angle, 11° relief and 0.8 mm corner radius offers a balance between strength and finishing capability. The plate thickness of 2.38 mm and the central hole with a cylindrical bore plus one-sided countersink (40°–60°) ensure stable mechanical clamping in standard ISO holders. These geometric choices allow repeatable seating, minimise micro-movement under load and support consistent chip formation—key factors for predictable cycle times and reduced scrap rates. Practical application guidance for workshop productivity Intended for turning (external and internal), the single-sided chipbreaker on this insert supports controlled chip flow in typical rostfreier Stahl operations under stable or slightly interrupted conditions. Compatibility with a holder is determined by plate form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters secures clamp stability and repeatable results. For mixed production—where surface quality and longevity are both vital—the grade and chipbreaker combination provides an efficient compromise between tool life and finish. For specialised tasks or uncertain conditions, Metav Werkzeuge can advise on the optimal chipbreaker and holder pairing. Discuss specification and supply with Metav Werkzeuge for the Tungaloy T6215 grade and ensure the insert is matched to the intended holder and machining strategy — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and rapid delivery Technical Data Article number: 6903131-Tungaloy Manufacturer SKU: TUN6903131 Manufacturer article number: 6903131 Core data Plate designation: TPMT090208 Size: 09 Plate form: triangular Plate thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Features Schneidstofftyp: CVD-coated carbide (T6215) Single-sided chipbreaker Hole: cylindrical bore with one-sided countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ Is the TPMT090208 T6215 suitable for rostfreier Stahl machining? Yes. The TPMT090208 T6215 insert is formulated for machining rostfreier Stahl under stable to slightly interrupted conditions, offering better wear resistance and edge stability for consistent results. Which holder parameters must be matched for correct mounting? Compatibility depends on plate form, relief angle, tolerance class, fastening, size and thickness; match these to the ISO triangular holder to ensure correct seating for the TPMT090208 (Tungaloy, SKU 6903131-Tungaloy). What effect does the 0.8 mm corner radius have on surface finish? A 0.8 mm corner radius provides a compromise between strength and finish: larger radii improve edge strength and tool life, while still enabling a good surface quality on rostfreier Stahl when used with the correct feeds. Why is a CVD coating advantageous on this grade? The CVD-coated carbide (T6215) offers a hard, uniform surface that reduces adhesion and flank wear during rostfreier Stahl turning, extending tool life and maintaining dimensional stability over longer cycles. Can the insert tolerate interrupted cuts or heavy interruptions? The T6215 grade on this insert is intended for stable to slightly interrupted cuts; for heavy interruptions a different grade or geometry optimised for impact resistance is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the 0.8 mm corner radius for reliable machining of stainless steels under stable to slightly interrupted conditions; order the insert through Metav Werkzeuge or consult our advisors for application-specific selection. TPMT 090208 T6215 indexable insert for turning — Tungaloy TPMT090208 T6215 is an ISO-format, triangular indexable insert designed for turning applications, combining a wear-resistant CVD coating with a single-sided chipbreaker for controlled chip formation. CVD-coated carbide for stainless steels 60° triangular geometry, ISO format 0.8 mm corner radius for surface quality Cylindrical hole with countersink for secure clamp Consistent wear resistance for productive stainless‑steel turning The CVD-coated carbide grade T6215 delivers a reliable combination of wear resistance and edge stability that supports repeatable part quality in turning operations. Designed specifically for machining stainless steels, the cutting grade reduces flank wear under stable to slightly interrupted cuts, which translates into longer tool life and fewer insert changes. The single-sided chipbreaker promotes predictable chip flow and easier handling of common turning tasks, helping to maintain consistent cycle times on production lines. Secure clamping and ISO compatibility reduce setup time The insert follows ISO dimensions and a 60° triangular form, so compatibility with standard holders is determined by form, free angle and size. The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and accurate seating in a matching seat or shim, while the 11° relief angle and 2.38 mm thickness provide the mechanical support required for stable cutting. Clear specification of these dimensions enables straightforward selection of clamping parts and reduces the risk of setup errors in repetitive production runs. Geometry tuned for surface finish and robustness A 0.8 mm corner radius balances edge strength and surface finish, making the insert suitable for both external and internal turning where moderate radii are required. The triangular plate format allows three indexing positions, improving cost efficiency per insert. When combined with an appropriate holder and the correct chipbreaker variant for the workpiece and cut, the geometry contributes to improved workpiece finish and reproducible tolerances, supporting downstream processes with fewer rework steps. For application advice or to request the TPMT090208 T6215 Tungaloy insert, contact Metav Werkzeuge for tailored recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer article number: 6877019 Manufacturer SKU: TUN6877019 SKU: 6877019-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Numbers / Core technical data Included angle: 60° Relief (free) angle: 11° Thickness: 2.38 mm Corner radius: 0.8 mm Size: 09 Special features / Versions Coating: CVD Material: cemented carbide Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Plate form: triangular Application: turning (external and internal) FAQ What materials is this insert recommended for? The insert is specified for turning stainless steels; the T6215 CVD-coated carbide grade offers wear resistance suited to those materials under stable to slightly interrupted conditions. Is the TPMT090208 compatible with standard ISO triangular holders? Yes — the insert follows ISO dimensions and a 60° triangular form; compatibility depends on holder form, free angle, tolerance class, clamping arrangement, size and thickness. How does the corner radius affect finish and strength? The 0.8 mm corner radius provides a compromise between edge strength and surface finish, improving robustness on interrupted cuts while still achieving a good turned surface. What clamping features does the insert have to ensure stability? The insert has a cylindrical hole with a one-sided countersink (40°–60°) to secure the insert reliably in combination with a compatible screw, shim or clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO-format compatibility and a robust 0.8 mm corner radius for reliable stainless steel turning; order the insert directly via Metav Werkzeuge or request application advice from the consultants. TPMT090208 T6215 indexable turning insert (CVD‑coated carbide, 0.8 mm radius) – Tungaloy The TPMT090208 T6215 is an ISO‑format triangular indexable insert designed for external and internal turning, optimised for stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning 60° triangular insert with 0.8 mm radius Cylindrical bore with one-sided countersink High wear resistance for consistent stainless steel performance The CVD‑coated carbide grade T6215 provides pronounced wear resistance and thermal stability, making it suitable for continuous machining of stainless steel where tool life and surface quality are decisive. The chemical vapour deposition (CVD) layer forms a hard, adherent protective film that reduces adhesion and built‑up edge during turning operations. This results in more predictable tool life and improved batch reproducibility, which supports efficient production planning and reduces unplanned tool changes. The formulation is particularly effective where stable cutting conditions can be maintained or where light interruptions occur. ISO compatibility and clamping geometry for process security As an ISO‑format triangular insert with a 60° included angle, the component fits a wide range of standard external holders and boring bars provided the holder matches by form, relief angle, tolerance class, fastening style, size and thickness. The cylindrical bore with a one‑sided countersink (40°–60°) ensures concentric seating and repeatable clamping, which contributes to dimensional consistency and reduced vibration. Compatibility with the clamping system is decisive for process security; the insert forms part of a system comprising the indexable insert, a matched external holder or boring bar, a locating shim or clamp set and suitable replacement screws. Edge geometry and chip control for reliable cutting results The 0.8 mm corner radius increases edge strength and is suited to medium‑to‑heavy feed ranges, offering a balance between edge robustness and achievable surface finish. The plate thickness of 2.38 mm and the single‑sided chipbreaker are optimised for controlled chip formation during turning operations; selecting the correct chipbreaker style and grade is essential to match the workpiece material, machining operation and machine stability. The geometry supports both external and internal turning tasks, enabling predictable cutting forces and consistent surface integrity when integrated into a properly configured tool set. For original Tungaloy quality and high process security with this insert, contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6903141 SKU: 6903141-Tungaloy Manufacturer SKU: TUN6903141 Manufacturer article number: 6903141 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Material: carbide Cutting material type: CVD‑coated carbide (T6215) Design: triangular insert (TPMT090208) Bore style: cylindrical bore + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TPMT090208 T6215 indexable insert is formulated for stainless steel machining; the CVD‑coated carbide grade T6215 offers wear resistance suitable for stable to slightly interrupted turning operations. How does the insert ensure repeatable clamping and accuracy? The insert’s cylindrical bore with one‑sided countersink and ISO geometry enable concentric seating and secure fastening in appropriately matched holders, which promotes repeatable positioning and dimensional consistency. Which edge radius and chipbreaker should be chosen for roughing? The 0.8 mm corner radius and the single‑sided chipbreaker are well suited to heavier feeds and roughing passes, providing enhanced edge strength and controlled chip formation when used with a stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T9215 Wendeplatten - Tungaloy
Take advantage of Tungaloy's CVD-coated carbide grade T9215 and the ISO-triangular format to increase throughput and tool life; the robust 0.8 mm corner radius and 11° relief angle support stable cutting in continuous to light interrupted cuts. Order the TPMT090208 insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT090208 T9215 — ISO triangular turning insert, CVD-coated carbide, Tungaloy TPMT090208 T9215 is an indexable triangular turning insert engineered for external and internal turning, offering high wear resistance and reliable edge security for medium-steel machining. CVD-coated carbide grade T9215 0.8 mm corner radius for versatile profiles 11° relief angle for stable cutting Cylindrical hole with 40°–60° countersink High productivity for medium-steel turning The ISO triangular insert combines a CVD-coated carbide substrate with a geometry optimised for consistent chip control and long tool life. The chosen grade, T9215, is tailored to medium steel machining and balances wear resistance with fracture toughness. As a consequence, the insert delivers reproducible performance in longer production runs and supports higher cutting speeds where stable conditions prevail. The single-sided chipbreaker reduces vibration and encourages predictable swarf formation, which simplifies downstream handling and inspection. Secure clamping and dimensional compatibility Designed to fit ISO-standard holders, the insert’s cylindrical hole with one-sided countersink (40°–60°) and defined thickness ensure reliable seating and repeatable tool positioning. The 11° relief angle reduces contact with the workpiece flank, lowering cutting forces and heat generation while maintaining a secure fit in the toolholder. This combination of geometry and mechanical compatibility minimises unexpected setup time and supports quick, repeatable index changes during scheduled maintenance or production shifts. Durable edge and cutting stability A 0.8 mm corner radius provides a compromise between sharp-profile detail and edge strength, enabling clean contouring without premature edge failure. The CVD coating fortifies the cutting face against abrasive wear and adhesion, making the insert suitable for continuous and light interrupted cuts common in medium-steel operations. These coating and substrate characteristics translate into fewer insert changes and steadier part quality, which can improve overall process economy and reduce scrap rates. Practical application guidance for reliable results When integrating the insert into an existing turning cell, select a holder and clamping set that match the ISO designation and thickness to preserve tolerances and clamping integrity. The insert’s design supports standard turning tasks—external profiling, shoulder turning and internal operations—provided the chipbreaker and grade are matched to the specific steel grade and depth of cut. Trial cuts under controlled conditions are recommended to establish feed and speed parameters that exploit the T9215 balance of productivity and edge security. Contact Metav Werkzeuge for tailored holder recommendations and to secure TPMT090208 T9215 inserts with reliable delivery and application advice Technical data Article number: 6772474 Manufacturer SKU: TUN6772474 SKU: 6772474-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T9215 Numbers / Core technical data ISO designation: 090208 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Insert size: 09 Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Designs / Special features Triangular insert shape Single-sided chipbreaker CVD-coated carbide grade T9215 Intended application: turning (external and internal) Compatible with ISO-standard holders Suitable for continuous to light interrupted cuts FAQ What material is the insert made from? The insert is produced from carbide and finished with a CVD-coated grade (T9215) to provide wear resistance and edge robustness for medium-steel turning. Which applications suit this ISO triangular insert? The triangular format is intended for turning operations—both external and internal—where consistent chip control and edge security are required, including profiling and shoulder work in medium steels. How does the 0.8 mm corner radius influence machining? A 0.8 mm corner radius strengthens the cutting edge for smoother contouring and improved tool life, reducing the risk of chipping on interrupted cuts while maintaining acceptable surface finish. Is the insert compatible with existing ISO holders? Yes; the insert follows ISO dimensions and features a cylindrical hole with a 40°–60° countersink, so compatibility depends on matching form, clearance, tolerance class and clamping hardware to the holder. What cutting conditions does the grade T9215 target? Grade T9215 is designed as a first choice for medium-steel machining, combining high wear resistance with fracture toughness to support productive cutting in continuous to lightly interrupted operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.8 mm corner radius for repeatable accuracy and ISO compatibility to keep turning processes stable and productive; order genuine inserts or request assistance from Metav Werkzeuge for holder matching and fast delivery. TPMT 090208 T9215 Tungaloy indexable insert for turning — CVD-coated carbide, 60° triangle A TPMT090208 T9215 ISO‑compliant triangular indexable insert designed for external and internal turning in medium‑grade steel, offering robust wear resistance and reliable performance for continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Triangular 60° geometry for versatile turning 0.8 mm corner radius for precision Suitable for continuous and light interrupted cuts Maximised productivity for medium‑steel turning The insert’s CVD‑coated carbide grade T9215 delivers a balance between wear resistance and toughness, enabling higher material removal rates in medium‑strength steels. The coating reduces flank and crater wear, extending effective tool life under steady cutting conditions and supporting longer production runs. As a result, machining cycles can be optimised for throughput without compromising surface finish or tool reliability. This rational advantage translates into fewer index changes and lower process interruptions, supporting consistent output in batch and series production. Consistent geometry for repeatable accuracy A 60° triangular geometry combined with a 0.8 mm corner radius and an 11° clearance angle ensures stable cutting conditions and repeatable dimensional results. The included angle and corner radius reduce edge stress while maintaining the radial strength required for finishing and light roughing passes. These geometric choices contribute to predictable tool deflection and surface integrity, making the insert suitable where tight tolerances and reliable finishes are required. The standardised ISO form also assists in maintaining consistent clamping and repeatability across compatible toolholders. Improved chip control and process stability The insert features a one‑sided chipbreaker that is tuned for chip formation in continuous and slightly interrupted cuts, improving evacuation in turning operations. Effective chip control reduces the risk of re‑cutting and surface damage, while the combination of the chipbreaker and the CVD coating enhances edge stability under varying feed rates. This results in fewer unplanned stoppages for chip clearing and contributes to a safer, more economic machining process with steady cycle times and predictable tool consumption. Easy integration into ISO holder systems Designed as part of an ISO‑compliant series, the insert integrates with standard external holders, boring bars and clamping systems; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert comes with a central hole featuring a cylindrical bore and a single‑sided countersink (40°–60°) to secure stable clamping and facilitate fast replacement. The 2.38 mm thickness and size 09 format make it a compact yet robust choice for a wide range of turning setups, simplifying inventory and reducing the number of specialised tools required at the machine. For genuine Tungaloy quality and tailored advice on matching holders or optimised cutting data, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fast supply and application support Technical data Article number: 6773987 SKU: 6773987-Tungaloy Manufacturer SKU: TUN6773987 Model series: ISO turning indexable inserts Article name: TPMT090208 T9215 Tungaloy insert Material: Carbide Dimensions & key figures Size: 09 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Hole: with hole; cylindrical bore + single‑sided countersink (40°–60°) Features & suitability Grade: T9215 Coating: CVD‑coated carbide Chipbreaker: one‑sided Geometry: triangular indexable insert Application: turning (external and internal) Compatibility: ISO‑compliant; fit determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The TPMT090208 T9215 insert is specified for medium steel turning; the CVD‑coated carbide grade T9215 balances wear resistance and toughness for productive machining in those steels. Can this insert be used for interrupted cuts? Yes, the Tungaloy TPMT090208 with a one‑sided chipbreaker is suitable for continuous to lightly interrupted cuts; heavy interruptions may require a different geometry or substitute grade. How is the insert secured in the holder? The insert uses a central hole with a cylindrical bore and a single‑sided countersink (40°–60°) to ensure stable clamping in compatible ISO toolholders. Which geometric parameters affect compatibility with holders? Compatibility is determined by form, clearance angle (11°), tolerance class, fastening method, size (09) and thickness (2.38 mm); matching these ensures correct seating and repeatable performance. What advantages does the T9215 grade deliver? The T9215 grade provides high wear resistance combined with reliable edge strength, helping to extend tool life and maintain consistent process results in medium‑steel operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 090208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade engineered for robustness and a proven PS chipbreaker for reliable chip control; the result is consistent performance in medium to heavy steel turning. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. TPMT 090208 T9225 — ISO turning insert TPMT090208-PS, CVD-coated carbide, 0.8 mm radius (Tungaloy) TPMT090208-PS T9225 is an ISO triangular turning insert designed for external and internal turning, offering a universal grade tuned for medium to heavy steel machining and variable engagement conditions CVD-coated carbide for robust steel machining Universal grade T9225 for medium to heavy cuts Triangular ISO insert with 60° included angle 0.8 mm corner radius and PS chipbreaker Consistent cutting performance for variable turning conditions The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T9225 provides balanced toughness and edge stability, which is particularly valuable when cutting steels under fluctuating engagement or lightly interrupted cuts. The insert's 0.8 mm corner radius increases edge strength and helps maintain a steady tool life without excessively compromising surface finish; a smaller radius would favour finish but lower edge durability, so this geometry is a pragmatic compromise for production environments. Designed as an indexable insert, it reduces downtime by enabling fast, repeatable index changes while maintaining predictable cutting behaviour. Secure clamping and ISO compatibility for process safety The insert follows ISO conventions for form and size, with a 60° included angle in a triangular configuration and a 11° relief angle, which together determine cutting geometry and clearance. The plate is 2.38 mm thick and size 09, with a cylindrical hole plus single-side countersink (40°–60°) to ensure positive, concentric location in compatible holders. Correct selection of the matching external holder or boring bar, together with the appropriate shim/clamp set and fastening hardware, leads to improved rigidity and reduced vibration, directly translating into better surface quality and more predictable tool life in serial production. Effective chip control and system flexibility for everyday machining The PS chipbreaker is tuned for robust chip formation in medium to heavy steel operations; it guides chip flow to prevent long, continuous swarf and supports safer, uninterrupted running. As a universal solution, the insert is well suited where workpiece materials and cutting conditions vary, allowing a single grade to cover multiple operations without frequent tool changes. The system approach — insert, compatible holder or bar, underlayer/clamp set and spare screws — enables quick replacement of worn parts and keeps machines productive. For bespoke materials or unusually demanding profiles, choosing a different chipbreaker geometry or a matching grade can further optimise results. Contact Metav Werkzeuge for tailored application support and to request availability of the TPMT090208-PS T9225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: 6781156 SKU: 6781156-Tungaloy Manufacturer SKU: TUN6781156 Model series: ISO-Drehwendeschneidplatten Name: TPMT090208-PS T9225 Specifications Corner radius: 0.8 mm Plate thickness: 2.38 mm Included angle: 60° Relief angle: 11° Plate size: 09 Features & compatibility Coating: CVD-coated carbide (T9225) Chipbreaker: PS Hole: cylindrical hole with single-side countersink (40°–60°) Plate form: triangular Application: turning; external and internal turning; medium to heavy steel machining System components: insert, suitable external holder or boring bar, shim/clamp set, spare screws FAQ Which materials is this insert suitable for? The TPMT090208-PS T9225 insert is a universal CVD-coated carbide grade primarily intended for steel machining, covering medium to heavy cuts and situations with changing engagement. How does the PS chipbreaker affect machining? The PS chipbreaker promotes short, controlled chips under medium to heavy cutting, improving chip evacuation and reducing the risk of long swarf in turning operations with the TPMT090208-PS T9225 insert. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, relief angle, tolerance class, fastening and plate size; select a holder specified for a 60° triangular ISO insert with size 09 and matching thickness for secure clamping of the TPMT090208-PS T9225 (SKU 6781156-Tungaloy). What are the key dimensions to consider when replacing an insert? Key dimensions are the corner radius 0.8 mm, plate thickness 2.38 mm, included angle 60° and relief angle 11°; these determine edge strength, clearance and the correct seat in the toolholder. Is this insert suitable for interrupted cuts? Yes — the robust T9225 grade and reinforced edge geometry make the TPMT090208-PS T9225 well suited to lightly interrupted cuts and variable engagement, offering reliable performance under such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 T9225 Wendeplatten - Tungaloy
Combine the robustness of the CVD-coated T9225 grade with precise 60° triangular geometry and a 0.8 mm corner radius for reliable medium-to-heavy turning — order directly via Metav Werkzeuge or consult our specialists for optimal holder selection. TPMT090208 T9225 — indexable turning insert (triangular, 60°, Tungaloy) TPMT090208 T9225 is a triangular ISO indexable insert designed for turning applications in steel, offering a universal CVD-coated carbide grade for stable performance in variable engagement conditions. CVD-coated carbide grade T9225 For medium to heavy steel machining Triangular insert, 60° with 0.8 mm radius Cylindrical hole with single-sided countersink Consistent cutting performance for mixed engagement conditions The TPMT090208 T9225 insert pairs a CVD coating with a robust carbide substrate to deliver consistent results when cuts vary between continuous and slightly interrupted. The T9225 grade is engineered as a universal, tougher option for medium-to-heavy steel machining, reducing the frequency of unexpected edge failures. This combination yields more predictable tool life and helps maintain cycle-time stability on both conventional lathes and CNC turning centres. The result is fewer tool changes and a steadier production flow. Geometry that simplifies setup and maintains surface finish The insert’s 60° included angle and 0.8 mm corner radius provide a balance between strength and fine-edge geometry, helping to preserve component tolerance while resisting corner chipping. With an 11° clearance angle the profile offers reliable chip flow and reduced rubbing on the flank. Because the insert conforms to ISO specifications, interchangeability with ISO-compatible holders is straightforward: compatibility depends on shape, clearance, tolerance class, fastening, size and thickness, so selection focuses on matching holder form and clamp method rather than bespoke mounts. Secure mounting and system flexibility for workshop efficiency This triangular insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and repeatable seating in standard cutters and boring bars. The 2.38 mm plate thickness and single-sided chipbreaker ensure mechanical stability under higher feed and depth-of-cut conditions. As part of an ISO insert system, the cutting insert works with a matching external holder or boring bar, supported by a backing plate/clamp set and standard replacement screws — a setup that reduces inventory variants while preserving machining performance. Lower total cost per part through predictable tool life By combining a universal tough grade with an established geometry, the insert reduces the need for frequent grade changes across mixed steel batches and improves process reliability. The indexable insert approach allows rapid index changes and minimal downtime, which together lower the effective cost per part. For operations seeking a pragmatic balance between stock breadth and cutting performance, this insert offers a practical route to improved uptime and steady surface quality. For ordering, technical pairing or assistance with holder selection, contact Metav Werkzeuge — the team can advise on matching the TPMT090208 Tungaloy insert to the most suitable turning holder and process parameters. Technical Data Article number: 6781328 SKU: 6781328-Tungaloy Manufacturer SKU: TUN6781328 Model series: ISO turning indexable inserts Designation: TPMT090208 Facts Size designation: 09 Thickness: 2.38 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Special features Material: carbide Coating / grade: T9225 (CVD-coated) Plate form: triangular Hole style: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning System compatibility: ISO insert with matching holder, backing plate/clamp set and spare screws FAQ What materials is this insert best suited for? The TPMT090208 T9225 insert is designed primarily for steel machining and performs well in medium to heavy turning operations thanks to the tougher T9225 CVD-coated carbide grade. How does the insert mount in standard holders? Mounting uses the insert’s cylindrical hole with a single-sided countersink (40°–60°) for positive clamping; compatibility follows ISO standards for triangular inserts and matching holder forms. Can the insert handle interrupted cuts? Yes, the T9225 grade and the insert’s geometry provide enhanced toughness for slightly interrupted cutting conditions commonly encountered in turning steel. What chip control can be expected? The single-sided chipbreaker is optimised for predictable chip formation in turning applications, improving evacuation and reducing the risk of built-up edge in steel machining. Which holder or clamping components are required? The insert is intended for use with ISO-compatible external turning holders or boring bars, plus a backing plate/clamp set and replacement screws for secure, repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD-coated carbide grade that combines a sharp, stable cutting edge with ISO compatibility for reliable medium turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our technical team for application guidance. TPMT 110202 AH6225 — TPMT turning insert for medium finishing, 60° geometry, Tungaloy TPMT 110202 AH6225 is an ISO-compliant triangular turning insert designed for external and internal turning applications where a sharp yet robust edge is required for rostfreier Stahl and variable machining conditions PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining Triangular 60° geometry for versatility Cylindrical hole with single-side countersink Increased process reliability through a balanced cutting grade The PVD-coated carbide grade AH6225 offers a well-balanced combination of hardness and edge integrity, designed to deliver consistent performance in medium turning operations. The coating extends tool life under variable cutting conditions while the substrate provides stable wear resistance; this results in fewer insert changes and more predictable cycle times. As an indexable insert, it reduces set-up time and supports efficient tool management across serial production runs. Precise geometry for repeatable results and simple integration With a 60° triangular geometry and a corner radius of 0.2 mm, the insert stabilises cutting forces while maintaining good surface finish potential. The specified relief angle of 11° and a plate thickness of 2.38 mm ensure compatibility with ISO holders where form, relief, tolerance class, fastening, size and thickness match. The insert’s hole—cylindrical with a single-sided countersink (40°–60°)—supports secure clamping and repeatable seating, which helps reduce vibration and improve dimensional accuracy in both external and internal turning. Application guidance and recommended use cases Choose this grade and the PS chipbreaker when machining rostfreier Stahl in medium material removal rates and mixed cutting conditions. The PS chip control geometry is developed to produce short, controllable chips on interrupted cuts and variable feed rates, reducing the risk of built-up edge formation and improving operator safety. For optimal performance, pair the insert with a matching ISO external holder or boring bar and verify holder tolerance and clamping style before production. If application parameters are unclear, Metav Werkzeuge provides technical advice and additional data to support setup and process optimisation. Contact Metav Werkzeuge for availability and detailed application advice on the Tungaloy AH6225 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903336 Manufacturer SKU: TUN6903336 SKU: 6903336-Tungaloy Label: TPMT110202-PS AH6225 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Geometry: 60° Relief angle: 11° Corner radius: 0.2 mm Plate thickness: 2.38 mm Plate size: 11 Countersink range: 40°–60° Special features PVD-coated carbide Grade AH6225 Chipbreaker PS Triangular plate With cylindrical hole and one-sided countersink ISO-compliant turning insert Application: Drehen Suitable for rostfreier Stahl FAQ Which materials is this insert suitable for? The Tungaloy TPMT110202-PS AH6225 insert is optimised for machining rostfreier Stahl and performs well in medium cutting regimes where a sharp, stable edge is required. What geometry and key dimensions define the insert? The insert has a 60° triangular geometry, a corner radius of 0.2 mm, a relief angle of 11°, and a plate thickness of 2.38 mm; these details make the insert suitable for a wide range of turning applications. How does the PS chipbreaker affect chip control? The PS chipbreaker on the AH6225 grade produces short, controllable chips under varying feed and interruption conditions, improving process stability and reducing the risk of built-up edge on rostfreier Stahl. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the TPMT110202-PS form follows ISO standards and requires a matching ISO external holder or boring bar. Is the AH6225 grade suitable for mixed machining conditions? Yes, AH6225 is engineered as a universal grade for rostfreier Stahl with a balance of sharpness and edge stability, intended for medium machining and changing conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110202 AH6235 Wendeplatten - Tungaloy
Take advantage of a robust combination of a PVD-coated carbide grade tuned for stainless steels and a compact 0.2 mm corner radius for flexible turning operations; the insert’s ISO design ensures straightforward compatibility with standard holders for reliable production. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT 110202 AH6235 — ISO turning insert (PVD-coated carbide, 0.2 mm radius) by Tungaloy The TPMT110202-PS AH6235 is an ISO-standard triangular turning insert engineered for external and internal turning, optimised for stainless steels and interrupted cuts. ISO triangular insert TPMT 110202 AH6235 PVD-coated carbide for tough stainless steel 0.2 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Consistent, high-performance cutting for stainless steels The insert’s PVD-coated carbide matrix delivers improved wear resistance and stable cutting when machining stainless steels, where work-hardening and built-up edge can be problematic. The chosen grade provides a tougher substrate that resists chipping in interrupted cuts, while the PS chipbreaker helps to control chip form and evacuation. These technical choices result in more predictable tool life and fewer unscheduled interruptions, supporting higher process reliability and a steady production flow. Easy integration into ISO tool systems for fast setup Designed to the ISO geometry series, the triangular format and specified dimensions ensure compatibility with common external holders and bores. The 11° clearance and 60° included angle give a familiar tool path geometry that simplifies fixture selection and reduces setup time. The insert uses a cylindrical hole with single-side countersink (40°–60°) for secure clamping; combined with the correct shim and clamp set, this enables consistent seat location and repeatable positioning across tool changes. Practical choice for interrupted cuts and demanding contours The 0.2 mm corner radius balances edge strength with the ability to produce fine radii and controlled cutting forces, making the insert a practical option for finish and medium-turning passes. In interrupted or unstable cuts the tougher grade minimises edge fracture, while the PS chipbreaker geometry promotes short, manageable chips, reducing the risk of entanglement and improving surface finish. For comprehensive system performance, pair the insert with the matching holder, an appropriate underlay plate or clamping set, and replacement screws as required. For applications in stainless steels and interrupted turning, choose the Tungaloy AH6235 grade—contact Metav Werkzeuge for tailored recommendations and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6903508-Tungaloy Manufacturer SKU: TUN6903508 Manufacturer article number: 6903508 Model series: ISO turning inserts Label: TPMT110202-PS AH6235 Core measurements Radius: 0.2 mm Included angle: 60° Clearance angle: 11° Thickness: 2.38 mm Inscribed circle (size): 11 mm Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Coating / grade: AH6235 (PVD-coated) Cutting material: carbide Chipbreaker: PS Shape: triangular ISO designation: TPMT110202-PS Application: turning — external and internal; suitable for interrupted cuts and stainless steels FAQ What materials is this insert best suited for? The TPMT110202-PS AH6235 insert is designed primarily for stainless steels and applications with increased risk of edge breakout; the AH6235 grade provides toughness for interrupted and unstable cuts. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO geometry standards; compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness, so selection of a matching holder and shim is recommended. What does the PS chipbreaker do for machining? The PS chipbreaker promotes controlled, short chips and improved evacuation, which reduces chip-related interruptions and supports a better surface finish when using the AH6235 grade. Which components are needed to install the insert in a tool assembly? A suitable external holder or boring bar, a supporting underlay or clamping set and the correct replacement screw are required to secure the TPMT110202-PS insert reliably. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com