TPMT 110204 GH730 Wendeplatten - Tungaloy
Take advantage of a robust combination of longer edge life, secure ISO compatibility, and predictable finishing, all engineered to maintain steady production cycles. Order the TPMT110204 GH730 insert directly via Metav Werkzeuge or consult the team for application-specific guidance. TPMT 110204 GH730 triangular turning insert for ISO-standard turning by Tungaloy TPMT110204 GH730 is an ISO-standard triangular turning insert designed for general turning applications; suitable for a wide range of steels and finishing operations Triangle insert, ISO TPMT110204 GH730 grade for wear resistance and toughness 11° clearance for stable cutting geometry 0.4 mm nose radius for fine finishing Engineered for consistent productivity and predictable results The TPMT110204 GH730 indexable insert is manufactured from carbide and optimised for turning tasks where repeatability and tool life matter. The combination of the GH730 grade and the insert geometry provides a controlled balance between wear resistance and edge stability, reducing the frequency of insert changes and machine downtime. ISO conformity ensures consistent seat and clamping behaviour across compliant holders, so cycle times remain predictable and part tolerances are easier to maintain. Secure seating and reliable clamping for robust machining Compatibility with the toolholder is determined by form, clearance angle and dimensional tolerances; this insert features a triangular shape with a central fixing with hole and a single-sided countersink (40°–60°) for secure fixation. The 11° clearance reduces built-up edge and improves chip flow when paired with a suitable one-sided chipbreaker, while the standardised dimensions simplify inventory and changeover. The result is a reliable mechanical connection that supports stable cutting forces and consistent surface finishes. Improved surface quality and extended edge life A 0.4 mm nose radius gives a fine edge for superior surface finish in finishing passes while the GH730 grade contributes to long-lasting cutting edges under mixed cutting conditions. The insert thickness of 2.38 mm supports adequate rigidity against deflection in light- to medium-duty turning, and the one-sided chipbreaker provides effective chip control for a range of materials. This combination reduces rework and contributes to measurable process efficiency gains in serial production. Practical selection guidance for turning operations Select the insert geometry and the GH730 grade according to workpiece material, cutting strategy and desired surface quality. For roughing, choose a geometry and chipbreaker suited to higher feed and depth of cut; for finishing, the 0.4 mm nose radius and the GH730 grade deliver the balance required for tight tolerances and improved surface integrity. When in doubt about holder compatibility or optimal cutting data, consult technical documentation or request application recommendations to match holder form, size and clearance angle precisely. Contact Metav Werkzeuge for a tailored recommendation, availability information and rapid supply of Tungaloy TPMT110204 GH730 inserts to suit the intended turning application Technical data Article number: 6821012 Manufacturer SKU: TUN6821012 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO designation: TPMT110204 Grade: GH730 Nose radius: 0.4 mm Clearance angle: 11° Insert size: 11 Thickness: 2.38 mm Included hole style: with hole; cylindrical + single-sided countersink (40°–60°) Angle: 60° Special features Triangular plate form One-sided chipbreaker Intended application: turning Compatible system: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screw Carbide grade optimised for wear resistance and edge stability FAQ What materials is this insert suitable for? The TPMT110204 GH730 insert is intended for turning and is suitable for a broad range of steels and mixed-material applications owing to the GH730 grade’s balance of wear resistance and toughness. How does the insert secure to the holder? The insert fastens via a central cylindrical hole with a single-sided countersink (40°–60°); compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. Which finishing results can be expected with the 0.4 mm nose radius? A 0.4 mm nose radius supports fine finishing passes, producing improved surface integrity and tighter dimensional control when appropriate feeds and speeds are applied. Is TPMT110204 compatible with standard ISO holders? Yes. The plate follows ISO geometry standards and will fit ISO-compliant holders that match the TPMT form, thickness and clamping style. What is the main benefit of the GH730 grade? The GH730 grade complements the insert geometry by providing a practical balance of wear resistance, toughness and edge stability, extending service life under typical turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of reliable GH730 carbide, a 0.4 mm corner radius and ISO compatibility for consistent turning performance; order or request availability via Metav Werkzeuge for fast processing. TPMT110204 GH730 indexable insert for Turning — Tungaloy TPMT110204 GH730 is an ISO-standard triangular indexable insert designed for external and internal turning applications, combining a wear-resistant carbide grade with a 0.4 mm corner radius for fine surface results. ISO triangular insert TPMT110204 Carbide grade GH730 for turning 0.4 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink High-performance carbide geometry for predictable machining The triangular ISO insert combines a robust carbide substrate with the GH730 grade to balance wear resistance and toughness, delivering stable edge life under varied conditions. The 60° included angle and 0.4 mm corner radius enable precise control of cutting forces and a consistent contact geometry, which helps to reduce vibration and produce uniform surface quality. The 11° relief reduces rubbing on the flank face and improves chip formation at moderate feeds, while the compact 2.38 mm thickness contributes to rigidity in short overhang setups. Overall, the geometry and material selection provide a reliable basis for productive turning where repeatability matters. System compatibility and secure clamping for consistent results This insert is supplied in the ISO designation 110204 and is compatible with matching external holders or boring bars when the holder selection respects form, relief, tolerance class, fastening, size and thickness. The cylindrical hole with a one-sided countersink (40°–60°) ensures positive seating and simplifies clamp assembly in standard ISO clamping systems. The triangular plate form, paired with the specified thickness and size 11, allows straightforward integration into established tool systems, including shim/clamp kits and replacement screws. A properly matched holder and secure clamping translate directly into reduced indexing errors and stable cutting cycles. Operational benefits: tool life, surface quality and process economy The GH730 cutting grade broadens the application window by combining good wear resistance with edge stability, which supports longer tool life and predictable tool-change intervals. The single-sided chipbreaker is optimised for turning; when selected to match the workpiece and machining parameters it encourages controlled chip formation and ease of evacuation. Reduced downtime from fewer tool changes, together with consistent surface finish, contributes to improved process economy. For best outcomes, choose the chipbreaker and grade in line with the workpiece material and the required balance between feed, speed and depth of cut. For application-specific advice or to secure stock of this Tungaloy GH730 TPMT110204 indexable insert, contact Metav Werkzeuge for availability and guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821011 SKU: 6821011-Tungaloy Manufacturer SKU: TUN6821011 Model series: ISO turning indexable inserts Material: Carbide Facts ISO designation: 110204 Included angle: 60° Free (relief) angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 11 Special features Carbide grade GH730 (Tungaloy) Triangular plate form One-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) Intended for external and internal turning Compatible with external holders, boring bars, shims and clamp sets FAQ What operations is this insert suitable for? The TPMT110204 GH730 Tungaloy indexable insert (SKU 6821011-Tungaloy) is designed primarily for external and internal turning operations and is supplied in the ISO 110204 designation. How does the GH730 grade benefit machining? GH730 on the TPMT110204 GH730 Tungaloy insert provides a balance of wear resistance and toughness, helping to extend edge life and maintain consistent surface quality under variable cutting conditions. What does the hole style mean for clamping? The TPMT110204 GH730 Tungaloy insert features a cylindrical hole with a one-sided countersink (40°–60°), which secures positive seating in standard clamping systems and reduces the risk of indexing movement. Which geometry details affect surface finish? The 60° included angle and 0.4 mm corner radius of the TPMT110204 GH730 Tungaloy insert influence cutting engagement and contact geometry, supporting finer surface finishes at appropriate feeds. Can this insert be used across different holders and systems? Yes, the ISO designation of the TPMT110204 GH730 Tungaloy insert ensures compatibility with holders and boring bars that match the form, relief angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant GT9530 cermet and ISO conformity for reliable finishing and extended tool life in stable turning operations; order directly via Metav Werkzeuge or consult the technical advisors for application matching. TPMT110204 GT9530 turning insert — coated cermet for turning by Tungaloy TPMT110204 GT9530 is an ISO‑standard indexable insert for finishing and light universal turning, designed to deliver improved surface quality and longer tool life in stable machining setups Coated cermet GT9530 for wear resistance Suited for finishing and light universal turning ISO TPMT 110204, triangular 11 mm insert 11° relief angle for positive engagement Superior surface quality and controlled wear The GT9530 grade is a coated cermet engineered for high‑quality finishing of steel under stable conditions. Cermet combines ceramic hardness with metal toughness, which reduces built‑up edge formation and promotes a consistent surface finish. The coating enhances wear resistance and supports longer intervals between index changes, translating into fewer interruptions and more predictable production batches. Selection of this grade is advantageous where surface integrity and repeatability are priorities. Precise fit and secure clamping for consistent results Manufactured to ISO dimensions, the insert ensures compatibility with matching holders when form, relief angle, tolerance class, fastening and thickness are correctly matched. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) provides secure seating and reproducible orientation in the pocket, which reduces micro‑movement during cuts. This geometric consistency supports steady cutting conditions and contributes directly to improved dimensional accuracy in both external and internal turning operations. Stable cutting behaviour for finishing cuts With a 0.4 mm corner radius and a positive 11° relief angle, the geometry is geared towards finishing and light universal turning, offering a good balance between edge strength and low cutting forces. The single‑sided chipbreaker promotes predictable chip formation when paired with appropriate cutting parameters and a suitably rigid setup. The modest insert thickness and triangular 11 mm form provide multiple usable edges per index, enhancing tool economy in serial production where stability and repeatable quality are required. Application guidance and selection advice This insert is specified for turning of steel where a smooth surface and extended tool life are required; the single‑sided chipbreaker and GT9530 grade perform best with stable workholding and consistent cutting conditions. For mixed or unstable setups, selection of a different chipbreaker or a tougher grade may be preferable. Technical advice is available to match chipbreaker style and grade to workpiece material and cutting strategy, ensuring the chosen insert contributes to process efficiency and predictable cycle times. For application advice or stock availability of Tungaloy GT9530 inserts, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6998361 Manufacturer SKU: TUN6998361 SKU: 6998361-Tungaloy Model series: ISO turning indexable inserts Designation: TPMT110204 GT9530 Facts Corner radius: 0.4 mm Relief angle: 11° Insert size: 11 mm Thickness: 2.38 mm Included angle: 60° Materials & special features Material: cemented carbide Grade/coating: GT9530 (coated cermet) Plate form: triangular Hole: with cylindrical hole and one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What applications suit the GT9530 grade best? The TPMT110204 GT9530 Tungaloy turning insert (SKU 6998361-Tungaloy) is optimised for finishing and light universal turning of steel, offering improved surface finish and extended tool life under stable machining conditions. Which geometry details are most relevant for process planning? Key geometry parameters are the 0.4 mm corner radius, 11° relief angle and the 11 mm triangular form; these influence cutting forces, surface quality and edge strength during finishing operations. How is insert compatibility with holders ensured? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; matching these specifications guarantees correct seating and repeatable performance. Is this insert suitable for interrupted cuts or unstable setups? The GT9530 grade and the positive geometry are intended for stable cutting conditions; for interrupted cuts or unstable setups a tougher grade or different chipbreaker should be considered. How is the insert fixed in the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping; a compatible underlay/clamp set and correct fastening torque are recommended for reliable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear‑resistant coated cermet and a 0.4 mm corner radius for reliably improved surface finish and extended tool life; order directly via Metav Werkzeuge or consult our experts for holder compatibility and process optimisation. TPMT110204 GT9530 ISO turning insert for turning — Tungaloy A TPMT110204 GT9530 ISO‑standard triangular turning insert optimised for fine finishing and light universal turning of steel. Wear‑resistant cermet grade GT9530 ISO 60° triangular insert form 0.4 mm corner radius for fine finish Central hole with 40°–60° countersink Consistent finishing and longer tool life through a cermet grade optimised for steel The coated cermet grade GT9530 combines high wear resistance with a substrate engineered for fine finishing of steel workpieces. With a small 0.4 mm corner radius, the insert produces a refined surface without sacrificing stability, which reduces downstream finishing work and improves first‑pass quality. As a light universal finishing grade, it balances durability and edge integrity so that cycle times remain stable while part quality improves. Straightforward integration into ISO turning systems for predictable mounting Designed to the ISO geometry, the triangular 60° shape and defined relief angle of 11° ensure compatibility with standard turning holders when form, relief angle, tolerance class, clamping and thickness match. The insert has an inscribed circle of 11 mm and an insert thickness of 2.38 mm, with a central hole featuring a cylindrical bore plus a single‑sided countersink (40°–60°). These specifics enable reliable clamping and repeatable positioning in both outer and inner turning set‑ups, making tool changes quick and dimensionally consistent. Predictable chip control and reliable process behaviour for stable production The one‑sided chipbreaker is suited to stable machining conditions and helps to direct chips away from the cut, supporting safer operation and easier chip evacuation. The product’s carbide construction with a coated cermet cutting layer yields repeatable edge wear characteristics, which contributes to process security and reduces unscheduled rework. Select the chipbreaker and grade according to the material, cutting strategy and machine stability to maximise productivity and minimise tool change frequency. For availability, technical advice or to specify compatible holders for the Tungaloy GT9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our advisers will assist with selection and delivery. Technical data Article number: 6998351 Manufacturer SKU: TUN6998351 SKU: 6998351-Tungaloy Type designation: TPMT110204 Facts Corner radius: 0.4 mm Relief angle: 11° Angle: 60° Inscribed circle: 11 mm Thickness: 2.38 mm Design & special features Coating / grade: GT9530 Substrate: coated cermet Cutting material: carbide Insert shape: triangular Hole: with central hole; cylindrical bore + single‑sided countersink (40°–60°) Chipbreaker: one‑sided Typical application: external and internal turning of steel FAQ What materials is this insert recommended for? The TPMT110204 GT9530 insert is designed primarily for machining steel; the GT9530 cermet grade provides wear resistance suited to finishing and light universal cuts in steel. Which insert dimensions are critical when selecting a holder? Key dimensions are the inscribed circle 11 mm, thickness 2.38 mm and relief angle 11°; these determine compatibility with the turning holder and clamping set. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps achieve a finer surface finish while maintaining edge strength, reducing the need for additional finishing operations with the GT9530 grade. Is the TPMT110204 GT9530 suitable for internal turning? Yes, the insert’s geometry and single‑sided chipbreaker make the TPMT110204 GT9530 suitable for both external and internal turning when the holder and cutting parameters are matched to the workpiece and machine stability. What mounting style does the insert use? The insert is supplied with a central hole and a cylindrical bore with a single‑sided countersink (40°–60°), intended for secure clamping in standard ISO‑compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of coated cermet grade GT9530, ISO compatibility and a precise 0.4 mm corner radius for consistent finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. TPMT 110204 GT9530 indexable turning insert, coated cermet, Tungaloy The TPMT 110204 GT9530 is an ISO-standard triangular indexable insert for external and internal turning, designed for fine finishing of steel under stable cutting conditions. Coated cermet grade GT9530 for finishing ISO-standard triangular geometry for holders 11° clearance angle for low cutting forces Cylindrical hole with one-side countersink (40°–60°) Longer tool life and consistent surface quality for finishing The coated cermet composition GT9530 provides a wear-resistant cutting edge that supports extended production runs with predictable results. In finishing operations, reduced flank wear helps to maintain dimensional accuracy over multiple indexings, meaning fewer interventions and steadier cycle times. The combination of a sturdy substrate and thin, adherent coating translates into a reliable surface finish and less rework for precision components. Clear mounting compatibility and simple holder selection Designed to ISO form TPMT 110204, the triangular geometry and the specified hole style ensure unequivocal fitment with compatible external holders and boring bars. The 11° clearance angle and the standardised thickness make it straightforward to match the insert to the clamping system, reducing setup time. The cylindrical hole with a one-sided countersink (40°–60°) secures repeatable seating and torque control during fastening, improving stability in demanding turning. Process optimisation for steel finishing under stable conditions With a 0.4 mm corner radius and a 2.38 mm plate thickness, the insert is optimised for finishing and light general-purpose turning of steel where surface quality and tool life matter. The single-sided chipbreaker helps to produce controlled chips at typical finishing feeds, while the coated cermet substrate resists thermal and abrasive wear. Choosing this grade supports predictable costs per part and contributes to steady productivity in medium- to high-volume machining environments. For application support or to request batch availability of the Tungaloy GT9530 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, technically informed assistance. Technical Data Article number: 6998379 Manufacturer item no.: 6998379 Manufacturer SKU: TUN6998379 Our SKU: 6998379-Tungaloy ISO designation: TPMT110204 Facts Thickness: 2.38 mm Inscribed circle / size: 11 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Cutting material/coating: coated cermet (GT9530) Plate shape: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning Series: ISO indexable turning inserts Material: Hartmetall FAQ What materials is this insert intended for? The TPMT 110204 GT9530 is formulated as a wear-resistant finishing grade for machining steel and is best used in stable turning conditions where surface quality and longer tool life are required. How does the GT9530 coating affect tool life? The GT9530 coated cermet improves abrasion and flank wear resistance compared with uncoated grades, which helps to extend index life and maintain consistent part finish across production runs. Which holders are compatible with this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening and thickness; the ISO designation TPMT110204 matches standard triangular external holders and boring bars designed for that insert geometry. Is the hole style important for clamping performance? Yes—the cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable seating and correct clamping engagement, contributing to improved stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 GT9530 Wendeplatten - Tungaloy
Combining a wear‑resistant GT9530 coated cermet grade with the ISO TPMT geometry delivers a finishing insert that improves surface finish and extends tool life under stable cutting conditions. Benefit from the precise 60° triangular form, 11° relief and a 0.4 mm corner radius for predictable, repeatable turning results — order directly via Metav Werkzeuge or request application advice from our consultants. TPMT110204 GT9530 TPMT indexable turning insert for turning by Tungaloy — coated cermet, 11° relief The TPMT110204 GT9530 is an ISO‑standard indexable turning insert intended for external and internal turning, offering a coated cermet grade optimised for finishing and light universal use in steel under stable conditions. ISO triangular insert TPMT110204 Coated cermet grade GT9530 for finishing 11° relief with 60° included angle Central hole with countersink 40°–60° Predictable finishing performance for improved surface quality The combination of a coated cermet grade and the TPMT triangular geometry is geared toward consistent finishing under stable setups. The GT9530 grade provides increased hardness and wear resistance compared with conventional finishing grades, which translates into prolonged cutter life and more consistent part surfaces when machining steel. For operators seeking reliable surface quality, the insert’s geometry reduces the likelihood of burr formation and supports a fine finish at conventional feed and speed ranges. The wear characteristics of the coated cermet also help maintain dimensional accuracy over longer tool runs, lowering rework rates and increasing process stability. Clear mechanical compatibility for quick integration into turning systems As an ISO‑standard insert, compatibility with a cutting tool holder depends on several defined parameters: form, clearance angle (11°), tolerance class, fastening, size (11 mm) and thickness (2.38 mm). The TPMT shape features a 60° included angle and a 0.4 mm corner radius, while the plate has a cylindrical central hole with a single‑sided countersink (40°–60°) for secure clamping. This standardised design simplifies holder selection and spare‑part planning: a matching outer holder or boring bar, plus the appropriate shim/clamp set and replacement screws, completes the system. Clear specification of these parameters enables straightforward procurement and reduces the risk of assembly errors. Operational benefits and selection guidance for efficient machining In typical workflows the insert functions for both external and internal turning where a stable setup and consistent chip evacuation are present. The single‑sided chipbreaker should be matched to the workpiece material and the machining strategy — choosing the correct chipformer and grade is essential to exploit the GT9530 properties. The cemented carbide substrate gives a firm cutting edge while the coating enhances wear resistance, making this insert particularly suitable for finishing passes or light universal operations on steel. For planning production runs, the standardised dimensions and hole style ease inventory management and ensure rapid insert changes, supporting higher uptime and a more economical process. For tailored application advice or to secure stock of the Tungaloy GT9530 TPMT110204 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998357 SKU: 6998357-Tungaloy Manufacturer SKU: TUN6998357 Model designation: TPMT110204 Brand: Tungaloy Model series: ISO‑turning inserts Facts Included angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 11 mm Versions & features Shape: triangular Hole: with hole — cylindrical + single‑sided countersink (40°–60°) Grade: GT9530 (coated cermet) Chipbreaker: one‑sided Material: cemented carbide Typical application: external and internal turning System components: matching outer holder or boring bar, shim/clamp set, replacement screws FAQ Which holders are compatible with the TPMT110204 insert? Compatibility is determined by the insert form, clearance angle (11°), tolerance class, fastening type, size (11 mm) and thickness (2.38 mm); choose a holder specified for TPMT‑style inserts to fit the TPMT110204 GT9530 Tungaloy insert. For which materials is the GT9530 grade recommended? The GT9530 coated cermet is specified for finishing and light universal machining of steel, offering improved surface finish and extended tool life under stable cutting conditions. What is the function of the central hole and countersink? The cylindrical central hole with a single‑sided countersink (40°–60°) ensures secure clamp engagement and precise seating in compatible holders, aiding repeatable positioning of the TPMT110204 insert. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and surface finish: it supports fine finishing cuts while maintaining sufficient edge robustness for light to moderate interruptions under stable setups. Is TPMT110204 suitable for internal boring as well as external turning? Yes — the ISO‑standard triangular form and central clamping permit use in both external and internal turning applications, provided the holder and setup are appropriate for the required cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 cermet grade, ISO compatibility and a proven triangular geometry for consistent finishing performance; order the insert via Metav Werkzeuge or consult the specialists for application advice. TPMT110204 GT9530 — Tungaloy indexable insert for turning, coated cermet, 60° triangle The TPMT110204 GT9530 is an ISO-standard triangular indexable insert for turning, engineered for finishing and light general-purpose cuts where surface quality and extended tool life under stable conditions are required. Cermet coating GT9530 for extended tool life ISO triangular insert, 60° geometry Excellent surface finish for finishing cuts Single-sided chipbreaker; cylindrical hole + countersink Stable finishing and longer tool life with GT9530 The coated cermet grade GT9530 combines wear resistance and a fine cutting edge, making it especially suitable for finishing passes on steel where a high-quality surface is required. The hard yet sharp cutting layer reduces flank wear and supports longer intervals between index changes, which contributes to predictable process outputs and fewer interruptions on the shop floor. This grade is optimised for applications where tool life and surface integrity matter most. Clear ISO compatibility and how it affects holder selection As an ISO-standard insert, compatibility with a toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness. The triangular geometry with a 60° included angle and the specified free angle 11° define seating and cutting orientation; matching holders and clamping sets that accept ISO-format TPMT inserts ensures correct seating, secure fixation and repeatable positioning. Correct pairing reduces vibration and improves dimensional consistency in both external and internal turning. Geometry and features that enhance productivity The triangular plate with corner radius 0.4 mm and a plate thickness of 2.38 mm delivers a balance between edge robustness and the fine radius needed for finishing. A single-sided chipbreaker supports controlled chip formation during lighter cuts, while the cylindrical hole with one-sided countersink (40°–60°) allows conventional clamping systems to locate and lock the insert reliably. These design details translate into stable cutting behaviour and consistent surface results, especially in rigid set-ups. Recommended applications and machining approach Designed for turning operations, the grade is intended for finishing to light universal use on steel under stable machining conditions. The insert is suitable for both external and internal turning where consistent surface finish and longer tool life are priorities. Selection of the chipbreaker and grade should be matched to the workpiece material, the required finish and the machine/toolholder rigidity to achieve the most efficient cutting strategy and predictable results. Contact Metav Werkzeuge for availability and application-specific advice on Tungaloy GT9530 inserts; consultants provide machining recommendations and supply options Technical Data Article number: 6998370 SKU: 6998370-Tungaloy Manufacturer item number: TUN6998370 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Core dimensions Geometry angle: 60° Corner radius: 0.4 mm Free angle: 11° Plate thickness: 2.38 mm Plate size: 11 Special features Grade: GT9530 Cutting material: coated cermet Plate form: triangular Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert intended for? The GT9530 coated cermet grade is intended primarily for machining steel and is specified for finishing to light general-purpose turning in stable conditions. How does the 60° triangular geometry affect cutting? A 60° triangular indexable insert provides three cutting edges per index and is favourable for turning operations that require a fine balance between edge strength and access to grooves or shoulders. Is the insert compatible with standard ISO TPMT holders? Compatibility follows ISO form and sizing; the TPMT110204 designation indicates standard ISO fitment, so holders designed for TPMT inserts with corresponding size and thickness accommodate this plate. What benefits does the single-sided chipbreaker offer? The single-sided chipbreaker promotes controlled chip formation during finishing cuts, improving surface quality and reducing the risk of long, stringy chips in stable machining set-ups. Can this insert be used for internal turning as well as external turning? Yes, the design and ISO format of the insert suit both external and internal turning applications when paired with the appropriate holder and a stable set-up. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 PSS Wendeplatten - Tungaloy
A combination of precise finishing, low cutting forces and ISO-compatible geometry ensures stable, repeatable turning results; the uncoated NS9530 cermet grade and 0.4 mm corner radius deliver superior surface quality for continuous, light-depth cuts. Order the insert directly via Metav Werkzeuge or consult their technical advisers for tailored application support. TPMT110204-PSS NS9530 — ISO turning insert (finishing), Tungaloy The TPMT110204-PSS NS9530 is an ISO triangular finishing insert for turning, engineered for low cutting forces and high surface quality in finishing applications. ISO triangular finishing insert TPMT110204-PSS Uncoated cermet grade NS9530 for fine finishes Low cutting forces for continuous turning 0.4 mm corner radius for precise profiling Cylindrical hole with 40°–60° countersink Consistent fine finishing with an uncoated cermet grade The finishing-grade, uncoated cermet NS9530 is designed to produce very low cutting forces and excellent surface results when machining Stahl in continuous cuts and small depths of cut. Cermet combines ceramic hardness with some metallic toughness; this means the cutting edge stays sharp for a high-quality finish while resisting built-up edge under steady conditions. The result is a reliable, repeatable surface integrity which reduces post-machining work and improves first-off yield for precision components. ISO geometry and holder compatibility explained The insert follows ISO standard geometry, which simplifies selection of the appropriate external holder or boring bar. Compatibility is determined by insert form, 11° clearance angle, tolerance class, fastening method, size and thickness — check the mating holder for these key parameters. The triangular shape with a 60° included angle and 0.4 mm corner radius gives defined profile control and easy indexing. For secure clamping, the system build typically comprises the ISO insert, a matching outer holder or bar, a shim or clamping set, and replacement screws, ensuring reproducible clamping and stable cutting. Chip control, application scope and operational benefits The PSS chipbreaker on this finishing insert promotes uniform chip formation during light finishing passes, aiding surface quality and reducing the risk of interference with the workpiece or tool. Typical applications cover external and internal turning where continuous cutting and small feed/step conditions prevail. Using this insert in a correct holder system delivers better process stability and fewer interruptions, which contributes to efficient batch throughput and lower indirect machining costs. For customers requiring specification checks, Metav Werkzeuge provides technical guidance and compatibility verification. Contact Metav Werkzeuge for application guidance and fast supply of Tungaloy turning inserts — eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 Technical data Article number: 6998537 Manufacturer SKU: TUN6998537 SKU: 6998537-Tungaloy Facts Insert designation: TPMT110204-PSS ISO code: 110204 Corner radius: 0.4 mm Thickness: 2.38 mm Inscribed circle / size: 11 Clearance angle: 11° Included angle: 60° Special features Uncoated cermet grade NS9530 Chipbreaker: PSS Shape: triangular Hole: with hole — cylindrical hole + one-side countersink (40°–60°) Material: Hartmetall Typical application: Drehen (turning) FAQ What materials is this insert intended for? The TPMT110204-PSS NS9530 is a finishing grade developed for machining Stahl, providing low cutting forces and high surface quality in continuous cutting conditions. How does the NS9530 cermet differ from coated carbide grades? NS9530 is an uncoated cermet optimised for sharp-edge finishing; compared with many coated carbide grades it offers superior surface finish and lower cutting forces in light, continuous cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, tolerance class, fastening, size and thickness; the ISO geometry of the TPMT110204-PSS enables use with standard holders that match its 11° clearance angle and 60° triangle form. Is the TPMT110204-PSS suitable for internal turning? Yes, the insert’s geometry and chip control make it suitable for both external and internal turning when applied with the correct boring bar and clamping system. What does the PSS chipbreaker provide during finishing operations? The PSS chipbreaker promotes stable chip formation and evacuation during finishing passes, which supports consistent surface quality and reduces the chance of chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
The combination of ISO-standard geometry, an uncoated cermet NS9530 grade and a sharp cutting edge delivers reliable finishing performance and low cutting forces. Order the TPMT110204 NS9530 insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. TPMT110204 NS9530 — Indexable Turning Insert for Turning, Tungaloy TPMT110204 NS9530 is an ISO-conforming triangular indexable turning insert designed for precision finishing in steel turning applications. ISO-conforming triangular insert Uncoated cermet NS9530 grade Sharp edge for fine finishing Single-sided chipbreaker with hole High-precision finishing for steel turning The TPMT110204 NS9530 insert is engineered for low cutting forces and an excellent surface quality when turning steel. The uncoated cermet grade NS9530 provides a very sharp edge geometry that is particularly suited to continuous cuts and small depths of cut; this reduces built-up edge and helps achieve consistent finish on turned components. The ISO-standard geometry simplifies tool planning and guarantees repeatable results across compatible tool holders. Compatibility and secure clamping explained Compatibility with a tool holder depends on the insert’s shape, relief angle, tolerance class, fixation and size. The triangular form with a 60° included angle and a 11° relief angle requires a matching ISO clamping seat and the correct clamp or screw set. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), enabling standard centre-clamp or top-clamp systems; this ensures stable seating during finishing operations and reliable repeatability in serial production. Material and grade — what NS9530 means in practice The NS9530 designation identifies an uncoated cermet cutting material optimised for finishing steel. Cermet combines ceramic hardness with a metallic binder to maintain a fine cutting edge and resist wear at the cutting zone. As a finishing grade, it focuses on surface integrity and low cutting forces rather than heavy roughing capacity, making it appropriate where surface finish and dimensional control are primary objectives. Practical productivity benefits on the shop floor Using a finishing insert with a sharp edge and a dedicated chipbreaker reduces the need for secondary operations. The single-sided chipbreaker is tuned for chip control during finishing passes, lowering the risk of chip re-cutting and protecting the workpiece surface. The insert’s geometry and grade combine to deliver predictable tool life and consistent component quality, contributing to shorter cycle times for precision turned parts. Typical applications and user profile This insert is intended for external and internal turning where a fine finish is required on steel components. Typical users include precision workshops and production lines that manufacture shafts, bushings and turned fittings requiring tight surface finish tolerances. The insert’s ISO-standard format simplifies stocking and tool changeover in mixed-tool environments, supporting efficient production planning and inventory management. For ordering guidance or an application check of the TPMT110204 NS9530 indexable insert, contact Metav Werkzeuge; our advisers will confirm holder compatibility and delivery options. Technical data Article number: 6998532 SKU: 6998532-Tungaloy Manufacturer SKU: TUN6998532 Model series: ISO turning indexable inserts Core data Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Special features Grade: NS9530 (uncoated cermet) Shape: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Material: cemented carbide Application: turning FAQ Is this insert suitable for finishing steel components? Yes. The NS9530 uncoated cermet grade is optimised for finishing steel and delivers low cutting forces and high surface quality for turned parts. Which holders are compatible with the TPMT110204 NS9530 insert? Compatibility depends on form, relief angle, tolerance and fixation; the insert’s triangular shape, 11° relief and central hole with countersink suit ISO-compatible triangular holders with matching clamp or screw systems. Does the insert require a coated grade for higher temperatures? The NS9530 is an uncoated finishing grade; for higher-temperature or interrupted cutting applications, a coated or more wear-resistant grade may be preferable. How does the single-sided chipbreaker affect chip control? The single-sided chipbreaker is designed to manage chips during finishing cuts, improving chip flow and helping to protect the machined surface from re-cutting. Can this insert be used for internal turning? Yes. The insert’s geometry is suitable for both external and internal turning where toolholder access and clearance permit the triangular insert form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet NS9530 for fine surface quality, the 0.4 mm corner radius for repeatable geometry, and ISO compatibility for straightforward integration in turning operations; order directly via Metav Werkzeuge or consult our specialists for application matching. TPMT 110204 NS9530 indexable turning insert by Tungaloy — finishing for turning TPMT 110204 NS9530 is an ISO-form triangular indexable insert designed for precision finishing in turning applications, offering a sharp cutting edge and low cutting forces for superior surface results. ISO triangular turning insert TPMT 110204 Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge with low cutting forces Triangular plate with 0.4 mm corner radius Precise finishing for steel parts with reliable edge control This insert is engineered as a finishing grade for steel, utilising an uncoated cermet composition that delivers a sharp cutting edge and inherently low friction. The result is reduced cutting forces and a marked improvement in surface integrity during continuous cuts and small depth-of-cut operations. For production environments where consistent part quality matters, the combination of the NS9530 grade and the fine corner radius supports repeatable dimensional accuracy and minimises secondary finishing. Predictable performance and integration into ISO tool systems Designed to the ISO turning insert family, the plate form, relief angle and tolerance classes ensure compatibility with a wide range of external holders and boring bars. The standardised geometry simplifies tool change protocols and tool inventory management, reducing machine downtime and process variability. The single-sided chipbreaker and the plate’s geometric characteristics contribute to stable chip formation under appropriate cutting conditions, enhancing process control and easing operator set-up. Application guidance: optimised cutting strategy for best results For finishing on steel, adopt modest feed rates and shallow depths of cut to exploit the cermet’s edge quality; the insert performs particularly well in continuous uninterrupted cuts. The 0.4 mm corner radius balances strength and fine surface finish, while the 11° clearance supports effective chip flow and reduces rubbing. When selecting a holder, match form, free angle, tolerance class, clamping and size to maintain the insert’s defined seating and repeatability. For unusual materials or interrupted cuts, consult cutting data tables or Metav Werkzeuge’s technical advisors to confirm optimal parameters. Economic and quality benefits in serial production Using a finishing-dedicated insert such as this can shorten overall cycle times by reducing the need for downstream machining and polishing. The NS9530 grade is selected to combine surface finish capability with stable edge behaviour in the intended application, which translates into predictable tool life and lower process variance. For procurement and planning, the ISO conformity reduces the range of spare holders and accessories required, supporting cost-effective stocking and faster tool replacement routines. Contact Metav Werkzeuge for application advice, availability and to request the TPMT110204 NS9530 insert suitable for your turning operations Technical Data Article number: 6998546 Manufacturer SKU: TUN6998546 SKU: 6998546-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Facts ISO designation: TPMT110204 Plate form: triangular Plate size: 11 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included hole: with hole Special features Grade: NS9530 Cutting material type: uncoated cermet Application: turning (finishing) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical system build: ISO insert, matching external holder or boring bar, shim/ clamp set and replacement screws FAQ What materials is this insert intended for? The TPMT110204 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous turning operations that require a high surface standard. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility with a holder depends on matching form, relief angle, tolerance class, clamping method, size and thickness. What advantages does the NS9530 grade provide? NS9530 is an uncoated cermet grade selected for a sharp cutting edge, reduced cutting forces and consistent surface finish in finishing cuts. How should the hole and countersink be used during mounting? The TPMT110204 feature of a cylindrical hole with a one-sided countersink (40°–60°) ensures stable clamping; use the correct shim and screw combination recommended for the holder to secure repeatable seating. Can this insert be used for interrupted cuts or hard materials? This finishing-dedicated insert performs best in continuous cutting on steel; for interrupted cuts or significantly harder materials, consider alternative grades or consult Metav Werkzeuge for tailored advice. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and a reliable triangular ISO design for consistent surface quality in turning operations; order original Tungaloy inserts directly via Metav Werkzeuge or consult our technical team for application support. TPMT110204 NS9530 ISO turning insert (triangular, 11° clearance) by Tungaloy The TPMT110204 NS9530 is an ISO‑standard triangular turning insert designed for fine finishing in steel turning applications, offering a sharp cutting edge and low cutting forces for continuous cuts. ISO triangular insert TPMT110204 design Uncoated cermet grade NS9530 for fine finishing 11° clearance angle for low cutting forces Cylindrical hole with single-sided countersink Consistent finishing and reduced cutting force for efficient turning The insert is engineered as a fine finishing solution for steel machining, with an uncoated cermet grade that provides a sharp edge and stable cutting behaviour under continuous feed conditions. This results in reduced cutting forces, which in turn lowers spindle load and vibration, making it suitable for applications where surface quality and dimensional accuracy are priorities. The triangular format with a 0.4 mm corner radius gives a reliable compromise between edge strength and the ability to produce fine profiles on external and internal turning operations. Practical system compatibility and secure mounting for production use Compatibility is determined by the insert shape, clearance angle, tolerance class, attachment method, size and thickness; the ISO format simplifies selection for standard toolholders. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping and repeatable positioning, supporting stable machining cycles and predictable tool life. The nominal thickness of 2.38 mm and the 11° clearance angle help to ensure correct seating in matching holders and reduced risk of unexpected tool movement during medium and low depth finishing passes. Material choice and application benefits explained simply Made from cemented carbide and supplied in the NS9530 cermet grade, the cutting material is optimised for finishing steel, delivering a sharp cutting edge and excellent surface finish with modest cutting forces. For users less familiar with cermet: it combines ceramic hardness with metallic toughness to hold a fine edge under continuous cutting, favouring small depth‑of‑cut finishing passes and stable, repeatable results. The single‑sided chipbreaker helps control chip formation for turning tasks that demand consistent chip evacuation and minimal rework. For precise finishing in steel turning, contact Metav Werkzeuge to check availability of the Tungaloy TPMT110204 NS9530 insert and obtain expert advice for tool‑holder matching and process optimisation – eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: 6998554 SKU (manufacturer): TUN6998554 SKU (dealer): 6998554-Tungaloy Model series: ISO turning inserts Facts Shape: triangular Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included hole: with hole Hole style: cylindrical hole with single-sided countersink (40°–60°) Angle: 60° Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: single-sided Typical application: turning Series use: ISO‑standard turning inserts Material designation: cemented carbide FAQ What materials is this insert suitable for? The Tungaloy TPMT110204 NS9530 insert is specified as a finishing grade for steel and is optimised to deliver a sharp edge and superior surface finish when used for continuous cuts in turning operations. How does the NS9530 cermet grade affect performance? NS9530, an uncoated cermet grade, provides a hard, wear‑resistant cutting edge that maintains sharpness for fine finishing passes, reducing cutting forces and improving surface quality compared with standard grades. Which toolholder features are necessary for correct use? Correct compatibility depends on insert form, clearance angle, tolerance class, attachment method, size and thickness; matching holders that accept the ISO triangular TPMT110204 geometry and 2.38 mm thickness are required for secure clamping. Is the insert suitable for internal turning as well as external turning? Yes, the triangular geometry and single‑sided chipbreaker make this insert appropriate for both external and internal finishing applications, provided the correct holder and cutting parameters are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, ISO-standard fit and precise geometry for reliable finishing on steel; the insert supports continuous cuts with low cutting forces and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TPMT 110204 NS9530 — Tungaloy triangular turning insert for fine finishing (ISO 110204) TPMT110204 NS9530 is a triangular ISO turning insert designed for finishing operations on steel, characterised by an uncoated cermet grade and a sharp geometry for low cutting forces Uncoated cermet grade NS9530 Sharp cutting edge for high surface finish Triangular 11 mm size with 0.4 mm nose radius 11° clearance and 2.38 mm plate thickness High-quality finishing with cermet grade NS9530 The uncoated cermet NS9530 is optimised for finishing cuts on steel, delivering a sharp cutting edge that reduces cutting forces and improves the produced surface. Cermet grades combine ceramic and metallic properties to give a hard cutting edge with better wear resistance in finishing applications; this means more consistent component surfaces when machining continuous cuts or shallow depths of cut. The specified combination of geometry and material supports fine surface integrity without aggressive cutting parameters, which is particularly useful where dimensional accuracy and surface quality take priority. ISO compatibility and straightforward toolset integration Marked as ISO 110204, this triangular insert fits holders and boring bars that conform to the same ISO designation; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert has an 11° clearance, an active 0.4 mm nose radius and a 2.38 mm thickness, which are decisive dimensions when selecting the correct clamping set and replacement screws as part of a complete tooling system. The central cylindrical hole with a single-side countersink (40°–60°) enables secure indexing and repeatable location in standard clamping systems, so insert interchange is fast and reliable on ISO tooling platforms. Controlled chip formation and stable machining behaviour A single-sided chipbreaker is provided to assist chip control during turning, particularly in continuous-feed finishing operations. The geometry and the NS9530 grade combine to maintain low cutting forces and predictable chip flow, reducing vibration and promoting stability at the cut. For shops focused on repeatability, this translates into fewer interruptions for chip clearing and a consistent surface finish across batches, supporting process stability in serial turning tasks. Practical selection and handling for workshop use As an ISO triangular insert for turning, this component is intended for use with a matching external holder or boring bar plus the appropriate backing pad and clamping set. When replacing inserts, ensure the holder accepts the ISO 110204 form and the insert thickness of 2.38 mm; this preserves seating accuracy and cutting geometry. The finishing orientation and the uncoated cermet nature of the grade make this insert particularly suitable for steel finishing where fine tolerances and surface quality are required. For specific material mixes or interrupted cuts, consult tooling experts to verify the match between insert grade, chipbreaker and process stability. For fine finishing applications with Tungaloy inserts such as the TPMT110204 NS9530, contact Metav Werkzeuge for tailored recommendations and compatibility checks — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998522-Tungaloy Manufacturer article number: 6998522 Manufacturer SKU: TUN6998522 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Numbers / Core technical data ISO designation: 110204 Insert form size: 11 mm Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Included angle: 60° Designs / Special features Uncoated cermet grade NS9530 Triangular insert form Cylindrical hole + single-side countersink (40°–60°) One-sided chipbreaker Intended application: turning (finishing on steel) Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ Is this insert suitable for finishing steel? Yes. The TPMT110204 NS9530 is a finishing-grade, uncoated cermet insert developed for turning steel, offering a sharp cutting edge and low cutting forces for improved surface quality. Which holders will accept this ISO insert? Holders and boring bars that conform to the ISO 110204 form and accept an 11 mm triangular insert with 2.38 mm thickness will be compatible, provided the clearance angle and fastening method match. What is the purpose of the cylindrical hole and countersink? The central cylindrical hole with a single-side countersink (40°–60°) ensures secure, repeatable location in standard clamping systems and simplifies indexing during insert changes. Can this insert handle interrupted cuts? The grade and geometry are optimised for continuous finishing cuts and small depths of cut; for interrupted cutting, evaluation against the specific workpiece and process stability is recommended. What is the manufacturer SKU for ordering? The manufacturer SKU is TUN6998522 and the listed article number is 6998522-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 uncoated cermet finishing grade combined with a fine 0.4 mm nose radius and ISO conformity for consistently high surface quality and low cutting forces; order the TPMT110204 insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 110204 NS9530 Tungaloy turning insert — TPMT110204 finishing cermet for turning A TPMT110204 NS9530 indexable insert designed for finishing operations on steel, offering a sharp cutting edge and stable performance for continuous cuts and small depths of cut. Finishing cermet grade NS9530 for steel Sharp edge for low cutting forces Triangle insert, 11 mm size, 0.4 mm radius Cylindrical hole with 40°–60° countersink Delivering superior surface finish with reduced cutting forces The uncoated cermet grade NS9530 is engineered for finishing, producing a consistently fine surface while keeping cutting forces low. In practical terms, this means fewer passes to achieve target tolerances and a reduced tendency for built-up edge when machining steel under continuous cutting conditions. The combination of a finely honed cutting edge and small nose radius results in reliable dimensional control and an improved cosmetic finish, which lowers downstream grinding or polishing requirements and shortens cycle times. Assured fit and predictable clamping in ISO tool systems Compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening, size and thickness. The ISO designation and triangular geometry ensure the insert matches standard TPMT holders; the 11° relief angle and 60° included angle provide clear reference points for clamping and tool setup. The insert’s 11 mm inscribed circle, 2.38 mm thickness and cylindrical hole with 40°–60° countersink simplify replacement and reduce set-up variation, contributing to steady process repeatability on the shop floor. Why an uncoated cermet benefits finishing operations Cermet combines ceramic hardness with metal toughness to deliver a cutting edge that resists deformation at elevated temperatures typical of finishing passes. As an uncoated cermet, this grade prioritises sharpness and surface integrity rather than heavy-duty abrasion resistance, which is ideal for light feeds and shallow depths of cut. The result is improved surface roughness with minimal burr formation, less need for rework and consistent part quality—advantages that are particularly valuable in long-run production where reproducibility matters. Stable chip control and efficient tool handling for productivity The insert features a single-sided chipbreaker that promotes stable chip formation during finishing cuts, aiding evacuations and reducing the risk of chip re-cutting. As an ISO-format insert, it fits into established systems comprising an external holder or boring bar, support shim/clamp sets and replacement screws, allowing quick swaps and predictable torque settings. This modular approach reduces machine downtime and facilitates efficient tool inventory management, supporting higher machine uptime and lower per-part costs. Contact Metav Werkzeuge for availability and technical advice on Tungaloy TPMT110204 NS9530 finishing inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998633 Manufacturer SKU: TUN6998633 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Manufacturer: Tungaloy Facts Insert designation: TPMT110204 Size (inscribed circle): 11 mm Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 11° Included angle: 60° Special features Grade: NS9530 (uncoated cermet) Application: Drehen (turning) — finishing for steel Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Shape: triangular (TPMT) FAQ What material is this insert optimised for? The TPMT110204 NS9530 insert is optimised for finishing steel, delivering a sharp cutting edge and improved surface quality in continuous cuts. Can the insert be used in standard ISO holders? Yes, the ISO designation and triangular form ensure compatibility with matching TPMT-design toolholders, subject to matching form, clearance angle, tolerance class, fastening and thickness. What cutting tasks suit an uncoated cermet grade? Uncoated cermet grades such as NS9530 are best for finishing operations that require low cutting forces, fine surface finish and continuous cutting with small depths of cut. How does the hole and countersink affect clamping? The cylindrical hole with a 40°–60° single-sided countersink provides a stable seating and repeatable clamping position, supporting consistent tool offsets and ease of replacement. Is the TPMT110204 suitable for interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavily interrupted cutting, a different grade with greater toughness is typically recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 NS9530 Wendeplatten - Tungaloy
High-precision finishing for continuous cuts, provided by the uncoated NS9530 cermet grade and a 0.4 mm corner radius, results in low cutting forces and improved surface quality. The ISO form and 11° clearance ensure reliable clamping and straightforward toolholder matching. Order the TPMT110204 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT110204 NS9530 triangular turning insert by Tungaloy — 0.4 mm radius, 11° clearance A TPMT110204 NS9530 indexable turning insert designed for precision finishing in turning applications, offering a sharp cutting edge and consistent surface quality on Stahl ISO triangular turning insert TPMT110204 NS9530 Uncoated cermet for fine finishing of Stahl 0.4 mm corner radius for precise edge control 11° clearance angle and 2.38 mm plate thickness Consistent surface quality with a finishing-grade cermet The NS9530 grade is an uncoated cermet formulated for finishing cuts, delivering a sharp cutting edge and low cutting forces that help achieve superior surface integrity on Stahl components. Because the grade is optimised for continuous cutting and small depths of cut, the result is a predictable surface finish with reduced need for downstream polishing. For shops prioritising repeatable part quality, the finishing nature of this insert reduces rework and supports tighter tolerances. Secure clamping and ISO compatibility for fast integration Designed as an ISO-standard triangular insert, the plate fits systems that match form, clearance, tolerance class, fixation, size and thickness. The cylindrical hole with a one-sided countersink (40°–60°) provides stable seating and positive clamping in suitable holders. This compatibility minimises setup time and helps maintain process stability when swapping inserts between holders or replacing worn plates in multi-station setups. Lower cutting forces and predictable tool behaviour A small 0.4 mm corner radius combined with the finishing-grade microstructure results in reduced cutting forces and a cleaner shearing action, which benefits delicate turning operations. The single-sided chipbreaker supports controlled chip formation during finishing passes, reducing the risk of surface marks. These characteristics promote consistent cycle times and make the insert a reliable choice for lightweight cutting regimes where surface quality is critical. Practical guidance for turning applications Typical use includes external and internal turning where continuous cuts and small material removals are required. The triangular form and 11 mm size suit a wide range of external holders and boring bars when matched to the plate thickness of 2.38 mm. For best results, combine the insert with a rigid toolholder, appropriate clamping set and the correct screw type to preserve the sharp edge and ensure repeatable seating. Select a stable setup to exploit the low cutting-force behaviour fully. For professional finishing of Stahl components with Tungaloy quality, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998560 Manufacturer SKU: TUN6998560 Model series: ISO turning inserts ISO designation: TPMT110204 Brand: Tungaloy Core specifications Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Plate size: 11 mm Plate thickness: 2.38 mm Features & material Uncoated cermet grade NS9530 Single-sided chipbreaker Triangular plate shape With hole: cylindrical hole + one-sided countersink (40°–60°) Intended application: finishing turning on Stahl ISO-standard turning insert; compatibility via form and size FAQ Which materials is this insert intended for? The TPMT110204 NS9530 insert from Tungaloy is a finishing-grade, uncoated cermet designed primarily for turning applications on Stahl, especially where low cutting forces and high surface quality are required. Is the insert coated or uncoated? This insert is an uncoated cermet in grade NS9530, offering a sharp cutting edge suited to finishing operations without a surface coating. What are the key dimensions and identifiers for ordering? Key specs: 0.4 mm corner radius, 11° clearance, 11 mm plate size, 2.38 mm thickness, triangular form, included angle 60°. Manufacturer article number: 6998560; SKU: 6998560-Tungaloy. Which holders and clamping features are compatible? Compatibility depends on form, clearance, tolerance class, fixation, size and thickness. The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for stable seating in matching toolholders and boring bars. What applications suit the single-sided chipbreaker? The single-sided chipbreaker is optimised for finishing passes in both external and internal turning, supporting continuous cuts and small depths of cut for improved surface finish and chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T5115 Wendeplatten - Tungaloy
Robust CVD-coated carbide T5115 and ISO-standard geometry deliver reliable edge life and consistent chip control for turning operations; combined with a secure cylindrical-hole clamping and a 0.4 mm corner radius, this insert supports productive machining of cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT110204 T5115 – Turning insert (ISO triangular) by Tungaloy TPMT110204 T5115 is an ISO‑standard triangular insert engineered for efficient external and internal turning, optimised for cast‑iron applications. ISO-triangle insert for stable mounting CVD-coated carbide grade T5115 Single-sided chipbreaker for controlled chips Cylindrical hole with single-side countersink Engineered for consistent performance and longer tool life The CVD‑coated carbide grade T5115 offers a balanced combination of wear resistance and edge stability, specifically tuned for machining cast iron. The coating and substrate pairing reduce flank wear and maintain cutting-edge integrity over longer tool lives, which translates into fewer interruptions and lower tooling costs per component. As part of an ISO insertion system, the plate provides repeatable geometry for predictable results across batches; this predictability supports higher first‑pass yields and better utilisation of machine time, improving overall production efficiency. Geometry and chip control that reduce downtime The triangular shape with a 60° included angle and 0.4 mm corner radius delivers a secure cutting edge for finishing and light roughing, while the single-sided chipbreaker promotes short, predictable chips when machining grey or nodular cast iron. The 11° relief angle reduces rubbing and heat generation at the flank, and the plate’s 2.38 mm thickness gives mechanical rigidity under interrupted cuts. The cylindrical hole with single-side countersink (40°–60°) ensures secure clamping and consistent seat contact, reducing the risk of vibration and edge deterioration — a practical choice where process stability and surface finish matter. System compatibility and economical tool management Belonging to an ISO‑standard series, the insert integrates into common external holders, boring bars and clamping kits; compatibility is determined by form, relief, tolerance class, fastening method, size and thickness. Using standardised plates simplifies inventory and allows targeted selection of grades and chipbreakers according to workpiece stability and machining strategy. The combination of a universal CVD grade and ISO geometry supports flexible production planning and rapid changeover, helping to reduce tool variants and lower total cost of ownership while maintaining consistent component quality. For tailored recommendations on Tungaloy turning inserts and to confirm suitability for specific cast‑iron operations, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application guidance and compatibility checks. Technical data Article number: 6864553 Manufacturer SKU: TUN6864553 Our SKU: 6864553-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide (cemented carbide) ISO designation: TPMT110204 Core measurements Corner radius: 0.4 mm Included angle: 60° Relief (frewinkel): 11° Plate thickness: 2.38 mm Plate size: 11 (ISO designation) Design & special features Triangular plate form With cylindrical hole + single-side countersink (40°–60°) Single-sided chipbreaker CVD-coated carbide, grade T5115 Application: turning, suitable for cast iron ISO‑standardised for holder compatibility FAQ What materials is this insert intended for? The TPMT110204 T5115 insert is specified primarily for cast iron; the CVD‑coated T5115 grade balances wear resistance and edge stability for reliable performance in grey and nodular cast‑iron machining. How does the chipbreaker affect machining? The single‑sided chipbreaker on this triangular insert produces short, controllable chips in turning operations, improving evacutation and reducing the risk of entanglement compared with uncontrolled long chips. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures broad compatibility with standard external holders and boring bars when those parameters match. What are the key geometric values that influence cutting behaviour? Important dimensions are the 60° included angle, 0.4 mm corner radius, 11° relief and 2.38 mm thickness; these affect edge strength, surface finish potential and rigidity under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T6215 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide durability, a precise 0.4 mm corner radius and dependable chip control for consistent turning of rostfreier Stahl; order authentic Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application matching. TPMT 110204 T6215 indexable turning insert — triangular ISO insert for turning — Tungaloy TPMT110204-PS T6215 is an ISO triangular indexable insert designed for external and internal turning, optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Triangular insert, 11 mm size 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Durable coating for demanding rostfreier Stahl turning The TPMT110204-PS T6215 insert combines a CVD-coated hardmetal substrate with a wear-resistant grade developed for rostfreier Stahl. Chemical vapour deposition (CVD) applies a thin, durable layer that improves abrasion resistance and heat tolerance, extending tool life under continuous and semi-interrupted cuts. For production environments this translates into fewer index changes and more predictable tool cycles, which supports consistent cycle times and lower process variability. Geometry and chip control for reliable surface quality The triangular plate form with a 0.4 mm corner radius and a dedicated chipbreaker PS gives a balance between strength and surface finish. A small corner radius reduces cutting forces and helps achieve finer finishes on shafts and bores, while the PS chipbreaker shapes swarf to avoid long, stringy chips when machining rostfreier Stahl. The cylindrical hole with a single-sided countersink (40°–60°) ensures repeatable clamping and positional accuracy in ISO holders, aiding dimensional stability and repeatable part quality. System compatibility and practical workshop advantages Compatibility is determined by plate form, free angle, tolerance class, fastening, size and thickness; the ISO designation simplifies selection for standard holders. The insert forms part of a system comprising the indexable plate, matching external holder or boring bar, supporting shim/clamp and replacement screws. This modular approach reduces inventory complexity and allows targeted optimisation: select a chipbreaker and grade that fit the component material and machine rigidity to improve productivity with minimal process trialling. Contact Metav Werkzeuge for tailored tooling advice on Tungaloy TPMT110204-PS T6215 inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to request matching holders and application recommendations Technical data Article number: 6877035 Manufacturer SKU: TUN6877035 SKU: 6877035-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMT110204-PS Grade/sort: T6215 Facts Thickness: 2.38 mm Plate size: 11 mm Corner radius: 0.4 mm Free rake angle: 11° Included angle: 60° Special features CVD-coated carbide grade T6215 Chipbreaker: PS Triangular plate form Cylindrical hole + single-side countersink (40°–60°) Compatible with ISO turning holders Application: external and internal turning on rostfreier Stahl FAQ What materials are suitable for this insert? The TPMT110204-PS T6215 insert from Tungaloy is formulated for machining rostfreier Stahl and performs well under stable to lightly interrupted turning conditions. What does the T6215 designation indicate? T6215 denotes a CVD-coated carbide grade with emphasised wear resistance and thermal stability, chosen to extend tool life when turning rostfreier Stahl. How is holder compatibility ensured for these ISO plates? Compatibility depends on plate form, free rake angle, tolerance class, fastening method, size and thickness; the ISO designation of the TPMT110204-PS simplifies pairing with standard indexable holders. What advantage does the PS chipbreaker provide? The PS chipbreaker on this insert promotes short, manageable chips and more consistent surface finish, lowering the risk of chip entanglement in shop-floor turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for stainless steels and a 0.4 mm corner radius for consistent surface finish and extended tool life. Order the insert directly via Metav Werkzeuge or ask our consultants for compatibility and optimal chipbreaker selection. TPMT110204 T6215 — TPMT ISO triangular turning insert, CVD-coated carbide, 0.4 mm (Tungaloy) The TPMT110204 T6215 is an ISO triangular indexable insert engineered for general turning operations, optimised for machining stainless steel under stable to lightly interrupted cutting conditions. ISO triangular indexable insert CVD-coated carbide grade T6215 0.4 mm corner radius for finish Cylindrical hole with 40°–60° countersink Maximum wear resistance for stainless machining The insert’s CVD-coated carbide grade T6215 delivers elevated wear resistance and stable chip formation when turning stainless steel, extending effective tool life and reducing unplanned interruptions. The coating metallurgy is chosen to withstand the typical adhesion and built-up edge tendencies of austenitic and other stainless grades; this means longer intervals between indexing and fewer tool changes, which directly supports productive batch cycles and predictable process windows. Secure seating and repeatable clamping for precision Designed to ISO standards, the plate features a cylindrical hole + one-sided countersink (40°–60°) for positive mechanical location and reliable clamping. The ISO system approach ensures the insert seats consistently in compatible triangular holders; form, clearance angle, tolerance class, fixing method, size and thickness determine exact compatibility. The result is repeatable positioning, stable cutting geometry and predictable component tolerances in serial production. Balanced geometry for surface quality and tool life A 0.4 mm corner radius provides a compromise between edge strength and surface finish, supporting smoother external and internal turning passes without excessive cutting forces. The 11° relief angle reduces flank rubbing while the 2.38 mm thickness contributes to rigidity at the cutting zone. The triangular format with a 60° included angle offers multiple indexed edges, and the single-sided chipbreaker guides chips away from the cut, improving surface integrity and reducing heat concentration at the edge. System-oriented selection for efficient machining Using the TPMT110204 inside a matched holder, underlay and fastening set yields a compact system that is easy to maintain and fast to changeover. Selecting the appropriate chipbreaker and matching the grade to component material and machining stability will pay off in cycle-time reductions and consistent workpiece quality. The ISO-compatibility simplifies sourcing spare plates and replacement screws, making the insert a pragmatic choice for workshops focused on throughput and reproducibility. For tailored advice on integrating Tungaloy CVD inserts into production or to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the best chipbreaker and clamping configuration for the application. Technical data Article number: 6877150 Manufacturer SKU: TUN6877150 SKU: 6877150-Tungaloy Label: TPMT110204 T6215 Tungaloy indexable insert Facts Radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 11 mm Relief angle: 11° Included angle: 60° Special features Material: carbide Coating/grade: T6215 (CVD) Shape: triangular Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Model series: ISO turning inserts FAQ Is this insert suitable for stainless steel? Yes. The TPMT110204 T6215 from Tungaloy is a CVD-coated carbide grade developed for turning stainless steel in stable to lightly interrupted conditions, offering improved wear resistance and consistent chip control. Which holders are compatible with this triangular plate? Compatibility depends on insert form, relief angle, tolerance class, fixing, size and thickness; the TPMT110204 fits ISO triangular holders with an 11 mm plate size and 60° included angle when the holder and clamping set match the plate geometry. How does the T6215 grade affect productivity? The T6215 coating enhances abrasion resistance and supports stable chip formation on stainless steel, which reduces edge wear and the frequency of indexing, thereby improving uptime and process reliability. How many usable edges does a triangular insert provide? A triangular ISO insert offers multiple usable cutting edges—typically three—so the plate can be rotated to present a fresh edge, increasing economy per insert and reducing tooling cost per cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T6215 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide grade T6215 with an ISO‑standard triangular form and a precise 0.4 mm corner radius, this indexable insert is optimised for stable to lightly interrupted turning of stainless steels; compatibility with the holder is ensured by matching form, relief angle and thickness. Order directly via Metav Werkzeuge or consult our technical team for specification support. TPMT 110204 T6215 turning insert (TPMT110204-PSS) by Tungaloy TPMT110204-PSS T6215 is an ISO‑standard triangular indexable insert for turning, designed for machining stainless steels under stable to lightly interrupted conditions CVD-coated carbide grade T6215 ISO-standard triangular insert form 0.4 mm corner radius for accurate profiles Cylindrical hole with 40°–60° countersink High‑performance wear resistance for reliable turning The TPMT110204-PSS T6215 insert combines a CVD coating with a wear‑resistant carbide substrate to extend tool life when machining stainless steel. The CVD layer provides thermal and abrasive resistance, reducing flank wear during sustained cuts and improving reproducibility across batches. For production environments where uptime and predictable tool change intervals matter most, this grade supports longer cutting windows and consistent surface finish without sacrificing dimensional stability. Predictable fit and simple holder selection Manufactured to ISO‑standard dimensions, the triangular form and defined geometry make holder compatibility straightforward: match the insert form, 11° relief angle, tolerance class, fastening type and thickness to the chosen external holder or boring bar. The insert’s cylindrical hole with single‑sided countersink (40°–60°) ensures secure clamping and repeatable seating. Using standardised components simplifies inventory and reduces set‑up time while ensuring the cutting edge sits correctly for accurate machining. Application focus and machining advantages With a 0.4 mm corner radius and a plate thickness of 2.38 mm, this indexable insert is suited to both external and internal turning where controlled edge strength and profile accuracy are required. The PSS chipbreaker is matched to the T6215 grade for effective chip control on rostfreier Stahl, particularly in stable to lightly interrupted cuts. The triangular geometry provides three indexable cutting corners per insert, supporting economic tool usage and predictable performance in serial turning operations. System setup and practical considerations A complete cutting system typically comprises the ISO insert, a compatible external holder or boring bar, a shim or clamp set and replacement screws; ensure the holder accommodates the 11° relief angle and the set screw pattern for this insert form. For less experienced planners: a larger corner radius increases edge strength and reduces chipping risk but may affect fine corner profiles; conversely, a smaller radius improves detail but requires more stable setups. The specified geometry balances profile control with robustness for many stainless steel turning tasks. Choosing the right chipbreaker and grade Select the PSS chipbreaker and the T6215 grade when machining stainless steels under predominantly continuous cuts or light interruptions; this combination favours stable chip formation and consistent wear behaviour. For heavily interrupted or roughing operations, consider a different grade or chipbreaker optimised for impact resistance. If there is uncertainty about the best match, provide details of material, depth of cut and stability to obtain tailored advice. Request specification assistance from Metav Werkzeuge to confirm the optimal Tungaloy grade and holder combination for specific turning tasks; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and availability Technical data Article number: 6876668 Manufacturer SKU: TUN6876668 Label: TPMT110204-PSS T6215 Material: carbide Model series: ISO indexable turning inserts Facts Insert code: 110204 Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 2.38 mm Insert size: 11 mm Included angle: 60° Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Coating: CVD Grade: T6215 Chipbreaker: PSS Shape: triangular Application: turning (external and internal) Recommended material: stainless steels Typical use: stable to lightly interrupted cuts System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? This insert is specified for machining stainless steels; the T6215 grade and PSS chipbreaker are tuned for stable to lightly interrupted turning of rostfreier Stahl. How is the insert secured in the holder? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) to match standard clamping systems for ISO triangular inserts and ensure repeatable seating. What does the 0.4 mm radius mean for machining results? A 0.4 mm corner radius increases edge strength and reduces chipping risk while producing slightly rounded internal and external profiles; it is a compromise between accuracy and robustness. Is TPMT110204-PSS T6215 compatible with all ISO triangular holders? Compatibility depends on matching insert form, relief angle, tolerance class, fastening method, size and thickness; the insert conforms to ISO dimensions, which simplifies holder selection. Can this insert be used for interrupted cuts? The T6215 grade and PSS chipbreaker are optimised for stable to lightly interrupted conditions; for heavy interruptions consider a more impact‑resistant grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 TM Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance and fracture toughness with ISO compatibility for consistently productive turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. TPMT 110204 T9215 TPMT110204-TM — Indexable turning insert with CVD-coated carbide, triangle 11, radius 0.4 mm — Tungaloy TPMT110204-TM T9215 is an ISO-standard triangular indexable insert designed for turning applications, especially for medium-grade steel where productivity and reliable edge life are required CVD-coated carbide grade T9215 ISO triangular insert, size 11 0.4 mm corner radius for versatile turning Consistent productivity for medium steel turning The insert is made from CVD-coated carbide in grade T9215, developed as the first choice for medium steel machining. This composition delivers a balance of wear resistance and fracture toughness, enabling sustained cutting performance in continuous to slightly interrupted cuts. The result is predictable tool life and fewer insert changes, which supports higher throughput and lower process interruptions. The chipbreaker designation TM is matched to the grade to support controlled chip formation and stable metal removal. Secure seating and precise geometry for repeatable results Designed to the ISO series specification, the triangular geometry and defined relief ensure compatibility with standard holders when form, relief angle, tolerance class, clamping and thickness match. The insert features a cylindrical hole with single-sided countersink (40°–60°) for secure clamping and repeatable seating, reducing the risk of positioning errors during index changes. The clearance angle of 11° and the apex angle of 60° give predictable cutting engagement, while the 2.38 mm plate thickness contributes to rigidity under typical turning loads. Geometry and corner radius tuned for versatile machining A 0.4 mm corner radius supports a wide range of turning tasks, from general finishing to light roughing, delivering a good compromise between edge strength and surface finish. The triangular insert shape provides three cutting edges per insert, increasing economy per indexable part. Being an ISO-standard turning insert, it forms part of a system comprising a matching external holder or boring bar, clamp set and spare screws, streamlining inventory and simplifying tool management on the shop floor. Practical selection guidance for the workshop For stable and productive machining choose the chipbreaker and grade according to workpiece material, cutting mode and machine rigidity. For medium steel applications the T9215 grade with TM chip control is recommended to combine durability with breakage resistance. Compatibility to a holder is determined by insert shape, free clearance, tolerance class, clamping method, size and thickness; confirm these parameters when replacing inserts to preserve cutting stability and dimensional accuracy. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts such as the TPMT110204-TM T9215, including cutting data sheets and local availability — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: 6777823 Facts Manufacturer SKU: TUN6777823 Insert designation: TPMT110204-TM Grade: T9215 Material: Cemented carbide Plate size: 11 mm Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 11° Apex angle: 60° Special features ISO-series indexable turning insert Triangle plate form Cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: TM CVD-coated carbide Intended application: turning (external and internal) Suitable for medium steel machining System: insert + external holder or boring bar, clamp set and spare screws Manufacturer article number: 6777823 FAQ What materials is this insert intended for? The Tungaloy TPMT110204-TM T9215 insert is intended primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for productive turning. How does the chipbreaker TM influence performance? The TM chipbreaker promotes controlled chip formation and smooth evacuation in continuous to lightly interrupted cuts, supporting consistent productivity with the T9215 grade. What determines compatibility with tool holders? Compatibility depends on insert form, relief (clearance) angle, tolerance class, clamping method, size and thickness; TPMT110204-TM must match the holder specifications to ensure secure seating. How many usable edges are available on this triangular insert? The triangular plate form offers three indexable cutting edges, increasing economical use per insert when the edge condition allows re-indexing. Which product identifiers should be quoted when ordering? Quote the insert designation TPMT110204-TM T9215 and manufacturer article number 6777823 or manufacturer SKU TUN6777823 to ensure the correct item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated T9215 wear resistance and a secure 60° triangular geometry with a 0.4 mm corner radius for versatile turning performance; compatibility with ISO holders and a cylindrical hole with single‑side countersink ensures reliable seating and fast changeover. Order the TPMT110204-TSF T9215 directly via Metav Werkzeuge or ask our consultants if needed. TPMT110204-TSF T9215 – Indexable turning insert, CVD‑coated carbide, 60° (Tungaloy) TPMT110204-TSF T9215 is an ISO‑standard indexable insert for turning, optimised for medium steel machining and designed for continuous to light interrupted cuts CVD‑coated carbide grade T9215 Triangular 60° insert geometry 0.4 mm corner radius for versatility Suitable for medium steel, continuous cuts Predictable wear life and higher productivity The CVD‑coated carbide composition provides a robust surface layer that improves wear resistance during sustained operations, so machining cycles remain productive for longer. For shops focused on throughput, this grade offers a balance between resistance to abrasion and edge toughness, which supports higher material removal rates without premature edge failure. The chipbreaker profile TSF is matched to the coating and geometry to promote consistent chip control in steady turning conditions, reducing the need for frequent operator intervention. Fast changeover and assured seating for repeatability Conformity to the ISO standard and the clear dimensional data ensure straightforward selection of a compatible holder and secure clamping. The insert’s cylindrical hole with a one‑side countersink (40°–60°) provides a positive seating interface, while the 2.38 mm thickness and 11° relief angle contribute to stable torque transmission and reduced runout. Together, these attributes deliver repeatable setup and consistent component quality across batches, simplifying process planning and fixturing decisions. Versatile geometry for surface finish and edge strength The 60° geometry and 0.4 mm corner radius make the insert suitable for a range of turning operations where a mix of dimensional accuracy and tool life is required. A smaller radius supports finer surface finish and sharper profiles, while the triangular form gives three indexed cutting edges for economical edge usage. As part of a system—insert, compatible holder, shim and clamping set—the plate is ready for standard turning applications and can be matched to cutter bodies that accept ISO‑format plates, reducing machine downtime and inventory complexity. For application advice on Tungaloy CVD‑coated inserts and to confirm compatibility with specific holders, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com for direct ordering and technical guidance. Technical data Article number: 6777782 SKU: 6777782-Tungaloy Manufacturer article number: TUN6777782 Material: Carbide (Hartmetall) Grade/coating: T9215 (CVD‑coated) Facts Included angle: 60° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 11 Relief angle: 11° ISO designation: 110204 Special features Triangular insert form Cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: TSF ISO turning insert series Application: Turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The insert is optimised for medium steel machining; the T9215 CVD‑coated carbide grade balances wear resistance and edge strength for continuous to light interrupted cuts. How does the hole and countersink affect clamping? The cylindrical hole with a one‑side countersink (40°–60°) provides a positive seating and stable clamp engagement, improving repeatability when mounting the TPMT110204-TSF T9215 in ISO holders. Can this insert be used for interrupted cuts? Yes, the grade and chipbreaker TSF are suitable for continuous and light interrupted turning; for heavy interruption, select an insert and grade specifically designed for shock resistance. How many cutting edges are available per insert? The triangular geometry offers three indexed cutting edges, which supports economical use of each insert before replacement or re‑indexing. What should be checked for holder compatibility? Confirm the holder accepts ISO‑format triangular plates with the specified size and thickness, and verify that form, relief angle and tolerance class match the specifications for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a triangular 60° geometry with a 0.4 mm corner radius and precise 11° clearance for stable, productive turning of medium steels; order directly via Metav Werkzeuge or consult the team for application-specific selection. TPMT110204 T9215 – ISO turning insert, CVD-coated carbide, 60° triangle (Tungaloy) A TPMT110204 T9215 ISO turning insert engineered for external and internal turning of medium steels, offering high wear resistance and robustness for continuous to slightly interrupted cuts. CVD-coated carbide for high wear resistance Triangular 60° geometry, 0.4 mm corner radius 11° clearance angle with cylindrical hole + countersink One-sided chipbreaker for continuous and light cuts Greater productivity from stable cutting geometry The triangular 60° geometry combined with a 0.4 mm cutting edge radius and a plate thickness of 2.38 mm provides a stable contact area that reduces vibration and improves edge life. For ISO-standard tool systems, this geometry supports repeatable seating and clamping, which translates into reduced set-up time and fewer rejected parts. The controlled geometry is especially beneficial in production environments where consistent surface finish and dimensional accuracy are required. The positive effect on cycle time and tool life contributes directly to improved process efficiency. Extended tool life through advanced coating and grade The T9215 grade, a CVD-coated carbide, balances wear resistance and fracture toughness to perform well in the middle range of steel machining. This combination allows productive cutting at higher material removal rates while maintaining tool life under continuous and slightly interrupted conditions. For operations prioritising longer intervals between tool changes, the coated grade reduces unexpected downtime and lowers overall tooling costs per component, supporting a measurable cost‑benefit over long production runs. Secure mounting and ISO compatibility for reliable operation As an ISO turning insert, compatibility with a holder is determined by shape, relief angle, tolerance class, fixation, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure positive clamping and stable seating in dedicated external holders or boring bars. A complete system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws, enabling dependable repeatability across tool changes and minimising set-up variations. Practical chip control and application advice The one-sided chipbreaker is designed for efficient chip formation and evacuation when machining medium steel, reducing re-cutting of chips and helping maintain surface quality. For best results, match the chipbreaker and grade to the workpiece material, cutting parameters and machine stability; the insert is suited to both external and internal turning operations. For those unfamiliar with technical terms: the clearance angle (11°) prevents rubbing behind the cutting edge, while the included angle (60°) affects approach to the workpiece and strength of the cutting edge. For assistance in selecting the right Tungaloy insert for a specific turning application, contact Metav Werkzeuge for a tailored recommendation and order coordination. Technical data Article number: 6774022 SKU: 6774022-Tungaloy Manufacturer SKU: TUN6774022 Model series: ISO turning inserts Core specifications Insert designation: TPMT110204 Grade: T9215 Insert size: 11 Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Features and materials Material: CVD-coated carbide Chipbreaker: one-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: Turning (external and internal) Suitable for: medium steel machining System components: ISO insert, matching holder/boring bar, shim/clamping set, spare screws FAQ What materials is this insert best suited for? The TPMT110204 T9215 insert from Tungaloy is optimised for medium steel machining thanks to its CVD-coated carbide grade, offering a balance of wear resistance and toughness. How does the chipbreaker influence cutting performance? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip re-cutting during turning operations. Is the insert compatible with standard ISO holders? Compatibility is ensured by matching the insert’s form, clearance angle, tolerance, fixation, size and thickness to an ISO-standard holder; the TPMT110204’s hole and countersink support secure clamping. Why is the 11° clearance angle important? An 11° clearance angle prevents rubbing behind the cutting edge, reducing friction and heat generation, which contributes to longer edge life for the T9215 grade. Can this insert handle interrupted cuts? The T9215 grade and robust geometry are suitable for continuous to light interrupted cuts; heavier interruptions may require a different grade or edge preparation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215 and the PS chipbreaker for high productivity and consistent wear performance in medium-steel turning; order via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. TPMT 110204 T9215 — Indexable turning insert (ISO) for turning, Tungaloy The TPMT110204-PS T9215 is an ISO-standard triangular indexable insert designed for external and internal turning applications, offering a balance of wear resistance and fracture toughness for productive medium-steel machining. CVD-coated carbide grade T9215 PS chipbreaker for stable chip control Triangular 60° geometry, 0.4 mm radius With cylindrical hole and 40°–60° countersink High wear resistance that sustains productivity The CVD-coated carbide T9215 is engineered for the demands of mid-range steel machining, combining elevated wear resistance with fracture safety to extend tool life under continuous to lightly interrupted cuts. This results in fewer indexings and reduced downtime, which directly supports higher spindle utilisation and a better cost-per-component ratio. The combination of a robust substrate and a CVD finish improves abrasive wear behaviour while maintaining stable cutting-edge integrity for uninterrupted production runs. Geometry and ISO compatibility for predictable results Triangular form with a nominal 60° included angle and a 0.4 mm corner radius gives reliable strength at the cutting edge while enabling versatile turning strategies. The insert has an 11° clearance (freespace) angle and a plate thickness of 2.38 mm, conforming to ISO sizing so that compatibility is defined by shape, clearance angle, tolerance class, clamping system, size and thickness. Using ISO-standardised inserts ensures repeatable seating and interchangeability across matching external holders and boring bars, which simplifies tool logistics and reduces set-up variability on CNC centres. Chip control and secure clamping for repeatability The PS chipbreaker is tailored to produce short, controllable chips in medium-steel applications, enhancing surface finish and lowering the risk of chip-related interruptions. The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) to ensure positive engagement with the clamping screw and stable seating against the seat or shim. Typical system assembly comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, enabling quick swaps and consistent clamping forces that preserve dimensional accuracy and repeatable cutting geometry. For productive medium-steel turning select the Tungaloy TPMT110204-PS T9215 — contact Metav Werkzeuge for ordering, technical guidance on holder compatibility and process optimisation Technical data Article number: 6772475 Manufacturer SKU: TUN6772475 Label: TPMT110204-PS T9215 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Size: 11 Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features Grade T9215 — CVD-coated carbide PS chipbreaker Triangular insert form (ISO) Suitable for external and internal turning Optimised for medium-steel machining, continuous to slightly interrupted cutting System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited to machine? The TPMT110204-PS T9215 is optimised for medium-steel machining; the CVD-coated carbide T9215 grade balances wear resistance and toughness for productive steel turning. How does the PS chipbreaker improve machining? The PS chipbreaker on this insert promotes short, controllable chips and consistent surface finish, reducing chip-related interruptions during turning operations. Which toolholders are compatible with this ISO insert? Compatibility depends on the holder's shape, clearance angle, tolerance class, clamping method, size and thickness; the TPMT110204-PS T9215 conforms to ISO dimensions for straightforward matching with standard external holders or boring bars. What clamping and seating features ensure repeatability? The cylindrical hole with a single-sided countersink (40°–60°) provides positive screw engagement and stable seating, ensuring repeatable clamping and dimensional consistency after indexings. Is this insert suitable for interrupted cuts? Yes — the T9215 grade is designed for continuous to slightly interrupted cuts, offering a compromise between wear resistance and fracture toughness for stable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide T9215 and a PM chipbreaker delivers stable chip control and excellent wear resistance for productive medium-steel turning; the precise 0.4 mm nose radius supports consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored process parameters. TPMT 110204 T9215 — Turning indexable insert, CVD-coated carbide, 0.4 mm radius — Tungaloy TPMT110204-PM T9215 is a triangular ISO indexable insert designed for high-productivity external and internal turning of medium steel, combining reliable chip control with prolonged tool life CVD-coated carbide grade T9215 Triangle ISO insert, size 11, 0.4 mm radius PM chipbreaker for medium steel turning 11° clearance angle, 2.38 mm thickness Cylindrical hole with 40°–60° countersink Maximised productivity for medium-steel turning The insert’s CVD-coated carbide grade T9215 is engineered to balance high wear resistance with sufficient fracture toughness, making it a strong choice for sustained production runs. The PM chipbreaker ensures predictable chip formation when machining medium steel, which reduces interruptions and increases effective cutting time. As a result, cycle times become more consistent and tool-change frequency is reduced, contributing to lower overall machining costs and higher throughput. Geometry that delivers consistent surface quality A small 0.4 mm nose radius combined with an 11° clearance angle and a plate thickness of 2.38 mm offers a compromise between rigidity and fine surface finish. The triangular ISO shape and defined corner radius permit repeatable positioning and straightforward indexing, so planing and turning operations maintain dimensional accuracy across multiple corners. The cylindrical centre hole with one-sided countersink (40°–60°) secures accurate clamping, supporting vibration suppression and repeatable seating of the insert in the toolholder. System-ready design for reliable integration The insert is part of a standard ISO turning insert system and requires a matching external holder, shim or clamping kit and retaining screw for correct assembly. Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; selecting the right holder geometry ensures the T9215 grade realises its full potential for continuous to light interrupted cuts. The result is a stable machining process that simplifies tool management and supports predictable component quality. Order the Tungaloy TPMT110204-PM grade T9215 via Metav Werkzeuge for immediate stock availability and application advice — Metav Werkzeuge can provide technical guidance at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6774046 Manufacturer SKU: TUN6774046 SKU: 6774046-Tungaloy Model series: ISO turning inserts Insert designation: TPMT110204-PM Facts Material: carbide Coating / grade: T9215 (CVD-coated) Chipbreaker: PM Nose radius: 0.4 mm Clearance angle: 11° Thickness: 2.38 mm Size: 11 Special features Triangular insert, ISO-standard Cylindrical hole with one-sided countersink 40°–60° Suitable for medium steel turning, continuous to light interrupted cuts Requires compatible external holder, shim and clamping set High wear resistance with balanced fracture toughness FAQ What materials is the TPMT110204-PM T9215 suited for? The TPMT110204-PM T9215 insert (Tungaloy, SKU 6774046-Tungaloy) is optimised for medium steel machining and offers stable performance on continuous to light interrupted cuts. How does the PM chipbreaker affect machining? The PM chipbreaker on the TPMT110204-PM T9215 promotes controlled chip segmentation and evacuation, improving process reliability and reducing the likelihood of built-up edge. Which holders are compatible with this ISO insert? Compatibility with the TPMT110204-PM T9215 depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; use an ISO-compatible external holder and the appropriate shim/clamping set for secure mounting. Is this insert suitable for interrupted cuts? The T9215 grade used for TPMT110204-PM provides a balance of wear resistance and fracture toughness, making it suitable for continuous machining and light interrupted cuts rather than heavy interruptions. Which geometry parameters influence surface finish with this insert? Surface finish when using TPMT110204-PM T9215 is primarily influenced by the 0.4 mm nose radius, the 11° clearance angle and correct clamping in the toolholder; these factors determine contact conditions and cutting stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide for enhanced wear resistance, the PSS chipbreaker for predictable chip control, and a 0.4 mm nose radius for consistent profile accuracy; order the inserts via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. TPMT 110204 T9215 — ISO turning insert for medium-steel turning, triangular 60° TPMT 110204 T9215 is an ISO-format triangular turning insert designed for external and internal turning in medium steels, combining a wear-resistant CVD coating with a PSS chipbreaker for steady, productive machining CVD-coated carbide grade T9215 Optimised PSS chipbreaker for consistent chips 60° triangular ISO insert, 0.4 mm radius Cylindrical hole with 40°–60° countersink 2.38 mm thickness, 11° relief angle Durable cutting performance for productive medium-steel turning The CVD-coated carbide in grade T9215 provides a balance of wear resistance and fracture toughness that supports high-volume operations and long operating intervals. This cutting material is engineered to maintain a stable cutting edge under continuous and lightly interrupted cuts, which reduces tool-change frequency and contributes to predictable cycle times. The coating extends performance where abrasion is the dominant wear mechanism, allowing higher material removal rates while preserving dimensional stability. Geometry engineered for repeatable accuracy and surface quality The 60° triangular geometry combined with a 0.4 mm corner radius and 11° relief angle delivers a stable cutting edge for profile turning and finishing passes. The modest nose radius ensures controlled engagement, helping to achieve consistent surface roughness without excessive cutting forces. A plate thickness of 2.38 mm adds rigidity at the cutting zone, reducing vibration and improving tool life; the resulting benefit is fewer rejects and more reliable part-to-part consistency in production. System compatibility and secure clamping for workshop integration As an ISO-standard insert, the part is compatible with a wide range of holders when matching form, relief angle, tolerance class, fastening method, size and thickness are observed. The design includes a cylindrical hole with a single-sided countersink (40°–60°) for secure mounting and repeatable orientation in the pocket. The commonly used system setup comprises the insert, a suitable outer holder or boring bar, a backing/clamp set and replacement screws; correct component pairing ensures repeatable clamping forces and consistent cutting geometry over many tool changes. Practical application scope and setup recommendations Intended primarily for turning of medium steels, the insert with a PSS chipbreaker is appropriate when chip control and stable, continuous cutting are priorities. For interrupted cuts or harder workpiece conditions, selecting a chipbreaker and cutting data aligned with the machine and clamping stiffness is advised. Where surface finish is critical, use the smaller nose radius and moderate feeds; where productivity is paramount, increase cutting speed within the grade’s recommended range while monitoring edge condition. For uncertain fits or selection guidance, Metav Werkzeuge’s technical advisers can confirm holder compatibility and optimal cutting parameters. For application-specific recommendations or to secure supply of the Tungaloy TPMT110204-PSS T9215 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss delivery and technical details Technical data Manufacturer article number: 6773981 SKU: 6773981-Tungaloy Manufacturer SKU: TUN6773981 Designation: TPMT110204-PSS T9215 Model series: ISO turning inserts Manufacturer: Tungaloy Core specifications Insert size: 11 mm Nose radius: 0.4 mm Thickness: 2.38 mm Relief angle: 11° Included angle: 60° Hole style: cylindrical hole with 40°–60° countersink Materials & features Carbide substrate CVD coating, grade T9215 PSS chipbreaker Triangular plate form With hole (cylindrical + single-sided countersink) Application: turning (external and internal) Suitable for continuous to light interrupted cuts Optimised for medium-steel machining FAQ What materials is this insert intended for? The insert is engineered primarily for medium-steel machining; the T9215 grade offers abrasion resistance and toughness suitable for those applications. Is the TPMT110204-PSS compatible with ISO tool holders? Yes. The TPMT110204-PSS follows ISO dimensions; compatibility depends on matching form, relief angle, tolerance class, fastening and thickness. What is the benefit of the PSS chipbreaker? The PSS chipbreaker delivers consistent chip formation and evacuation, improving process stability and reducing the risk of chip-related interruptions when using the T9215-coated insert. How should the insert be clamped? Use a matching holder with the correct pocket geometry and fastening screws; the cylindrical hole with countersink provides secure, repeatable clamping for the insert. Can this insert be used for interrupted cuts? The grade and geometry are optimised for continuous to light interrupted cuts; for heavier interruptions, consider a different chipbreaker or grade tailored to higher shock loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com