TPMT 090204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide, precise geometry and ISO compatibility for stable, productive turning operations; order the TPMT090204 AH725 insert directly via Metav Werkzeuge or contact the consultants for application advice. TPMT 090204 AH725 Tungaloy – ISO triangular turning insert for external and internal turning The TPMT090204 AH725 Tungaloy insert is an ISO-standard triangular turning insert designed for reliable external and internal turning, optimised for steel and stainless steels and suited to varying workpiece materials and compact tooling setups. PVD-coated carbide AH725 Universal for steel and stainless steels 11° relief angle for secure cutting Triangular 60° insert with 0.4 mm nose radius Optimised grade for consistent process security and chip control The AH725 grade is a PVD-coated carbide developed for universal, break-resistant performance across steel and stainless steels, which means fewer grade changes when workpiece materials vary. Its microstructure and coating combination support stable chip formation and reduced chipping on smaller tool bodies, delivering measurable improvements in process reliability. For production environments where changeovers and mixed batches are common, the optimised grade helps reduce scrap and unplanned tool changes while maintaining consistent material removal rates. Geometry tuned for surface quality and tool life A 60° triangular form with a 0.4 mm nose radius balances edge strength and surface finish: the small radius supports fine finishes on turned parts while the triangle shape provides three indexable cutting edges for economical tool use. The 11° relief angle reduces flank contact and rubbing, lowering cutting temperatures and abrasion. Combined with a plate thickness of 2.38 mm, the geometry ensures stable seating in compatible holders and predictable wear behaviour, translating to longer edge life and fewer interruptions in the machining cycle. Easy integration into ISO systems and economical operation Designed to the ISO standard, the insert integrates with a wide range of standard external holders and boring bars, simplifying tool management and inventory. The version with a cylindrical hole and single-sided countersink (40°–60°) allows secure clamping and repeatable positioning, while the single-sided chipbreaker supports controllable swarf for turning tasks. Overall, the design and material combination emphasise reliable wear resistance and productive machining, offering a cost-effective solution for shops seeking dependable, high-utilisation tooling. For expert selection and rapid supply of Tungaloy AH725 inserts, contact Metav Werkzeuge for tailored advice and availability. Technical data Article number: 6856722 Manufacturer SKU: TUN6856722 Our SKU: 6856722-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data ISO designation: 090204 Insert size: 09 Included angle: 60° Relief angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Special features Grade/coating: AH725, PVD-coated Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: external and internal turning Geometry: triangular insert with hole, indexable FAQ What materials is this insert suitable for? The TPMT090204 AH725 Tungaloy insert is formulated for machining steel and stainless steels, offering universal performance across varying batches and workpiece compositions. How does the AH725 grade improve process reliability? AH725 is a PVD-coated carbide grade that combines wear resistance and breakage tolerance to ensure stable chip formation and extended edge life during turning operations. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standard designation facilitates matching with common triangular external holders and boring bars. What is the significance of the 0.4 mm nose radius? A 0.4 mm nose radius provides a balance between surface finish and edge robustness, enabling fine finishing while maintaining sufficient strength for interrupted cuts. Is the insert indexable and cost-effective for production? Yes; the triangular geometry provides multiple indexable edges and, combined with the universal AH725 grade, supports productive, economical machining with reduced tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AT9530 Wendeplatten - Tungaloy
Efficient finishing on steel is achieved with the combination of the AT9530 coated cermet and a 0.4 mm corner radius, delivering consistent surface quality and predictable wear; compatibility with ISO holders is ensured by the standard 090204 geometry and 11° clearance. Order directly via Metav Werkzeuge or consult our specialists for tailored advice. TPMT090204 AT9530 Tungaloy indexable insert — triangular ISO insert for turning applications The TPMT090204 is an ISO triangular indexable insert engineered for finishing and light turning of steel, optimised for excellent surface quality and even tool life. ISO triangular insert TPMT form Coated cermet AT9530 for fine finishing 0.4 mm corner radius for high surface finish Countersunk central hole for secure fastening Predictable finishing and consistent surface quality The insert is built around a coated cermet grade that emphasises consistent flank wear and surface integrity during finishing passes. Its geometry provides a 0.4 mm corner radius that reduces chatter and helps maintain an even contact footprint, which in turn supports a superior surface finish on steel components. The combination of geometry and substrate makes the insert particularly suitable for light to finishing cuts where dimensional accuracy and visual quality are primary objectives. Compatibility and safe clamping for production environments Compliance with ISO 090204 geometry ensures the insert matches a wide range of standard holders when the form, 11° clearance angle, tolerance class, fastening and thickness are observed. The central cylindrical hole with a one-sided countersink (40°–60°) gives secure, repeatable clamping and simplifies index changes in automated or manual toolholders. For workshop planning, note the 2.38 mm thickness and triangular profile when specifying holders or shims to guarantee correct seat and clamping force. Practical advantages in chip control and process stability A one-sided chipbreaker combined with the coated cermet substrate assists in producing regular chip segments during light turning tasks, reducing the risk of long, entangling chips and improving operator safety and machine uptime. The insert’s design supports stable cutting conditions at finishing feeds and speeds, which helps to extend component batch consistency and reduces the need for repeated rework. Material focus and recommended uses This indexable solution is intended primarily for machining steel, with the cutting data and chipbreaker selection tuned for finishing and light machining operations. The coating and substrate balance wear resistance with toughness to withstand the thermal and mechanical cycles typical of finishing passes, helping to secure productivity when high surface quality and repeatable tool life are required. System perspective and process integration The insert is supplied as part of a system consisting of the ISO indexable plate, a matching external holder or boring bar, a shim/clamping set and replacement screws. Correct system assembly—selecting the appropriate holder geometry and tolerance class—ensures the AT9530 coating and carbide substrate perform as intended, translating material properties into stable, reproducible process results on the shop floor. For application guidance or to source the Tungaloy TPMT090204 AT9530 insert through Metav Werkzeuge, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical Data Article number: 6760632 SKU: 6760632-Tungaloy Manufacturer SKU: TUN6760632 Manufacturer: Tungaloy-NTK Model series: ISO-Drehwendeschneidplatten Name: TPMT090204 AT9530 Tungaloy indexable insert Facts ISO designation: 090204 Included angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Thickness: 2.38 mm Size: 09 Special features Coating / grade: AT9530 (coated cermet) Substrate: carbide Plate shape: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) Typical use: finishing and light machining of steel System requirements: matching holder, shim/clamping set, replacement screws Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What steels are suitable for this insert? The TPMT090204 AT9530 insert is optimised for machining various steel grades in finishing and light machining operations, where the AT9530 coated cermet delivers a good balance of wear resistance and surface finish. How does the chipbreaker affect process stability? The one-sided chipbreaker promotes regular chip formation during finishing cuts; this improves chip evacuation and supports stable machining with reduced risk of entangling chips when using the TPMT090204 insert. Is the insert compatible with standard ISO toolholders? Yes; the ISO 090204 geometry and the specified thickness and clearance angle allow compatibility with holders that match the form, tolerance class and fastening method required for this triangular plate. What advantages does the AT9530 coating provide? The AT9530 coated cermet emphasises uniform flank wear and surface quality during finishing, helping to extend usable tool life in light turning applications while maintaining consistent component appearance. Does the insert require special clamping hardware? Secure fixing is achieved with a central cylindrical hole and a one-sided countersink; standard clamping sets and appropriate replacement screws are used to ensure repeatable seating and safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 GH730 Wendeplatten - Tungaloy
Take advantage of robust cutting performance and consistent chip control through the combination of a wear-resistant GH730 grade and precise 60° geometry; order directly via Metav Werkzeuge or consult our team for technical matching and rapid supply. TPMT 090204 GH730 ISO turning insert — triangular 60°, 0.4 mm radius — Tungaloy The TPMT090204 is a triangular ISO turning insert designed for general external and internal turning operations, offering a compact geometry and a one-sided chipbreaker for predictable chip formation. ISO triangular insert, 60° geometry GH730 grade for wear resistance 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent chip control from matched geometry and grade The triangular, ISO‑standard shape combined with a dedicated chipbreaker ensures reproducible chip formation during both light finishing and moderate roughing cycles. The combination of a 60° cutting angle and an 11° clearance contributes to stable cutting forces and predictable tool life. These geometric choices reduce vibration and support consistent surface quality, while the single‑sided chipbreaker simplifies selection for standard turning tasks. Grade selection that balances wear resistance and edge stability The insert’s GH730 grade is engineered to deliver a compromise between hardness and toughness, which extends tool life under variable cutting conditions. As a tungsten carbide‑based product with an optimised microstructure, the grade sustains a sharp cutting edge and resists flank wear during continuous production runs, supporting higher productivity and fewer index changes. Clear mounting features for reliable clamping Mounting and clamping compatibility are defined by the insert’s form, tolerance class, fixing method and thickness. The plate features a cylindrical hole with a one‑sided countersink (40°–60°) that fits a wide range of ISO‑compatible toolholders, enabling fast and secure indexing. The presence of the hole and the standardised profile simplifies integration into existing tooling systems and reduces downtime during tool changes. Small radius and thin section for refined surface finishes With a 0.4 mm corner radius and a plate thickness of 2.38 mm, the insert supports fine finishing operations where surface integrity matters. The modest radius achieves a balance between edge strength and the ability to produce tight contour detail, while the slim section assists in limiting cutting forces on slender workpieces or when using extended holder overhangs. Durable construction for stable production cycles Produced from high‑quality tungsten carbide, the insert resists chipping and abrasive wear under normal turning conditions, contributing to longer intervals between indexing. The robust substrate and grade selection are aimed at reducing unexpected tool changes, allowing for more predictable planning of maintenance and tool inventory in the workshop. Practical guidance for selecting the right configuration For most standard turning tasks, choose holders that match the TPMT form and observe the specified clearance and tolerance classes; pairing the insert with the correct holder and clamp ensures optimal performance. For complex materials or specialised cycles, consult technical data sheets or ask Metav Werkzeuge for advice on geometry and grade combinations to match the application. Contact Metav Werkzeuge for tailored advice and supply of Tungaloy TPMT090204 GH730 turning inserts — technical matching, availability and ordering assistance by eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data Article number: 6821008 SKU: 6821008-Tungaloy Manufacturer SKU: TUN6821008 Model series: ISO-Drehwendeschneidplatten ISO designation: TPMT090204 Facts Cutting angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 09 Special features Grade: GH730 Material: tungsten carbide Plate form: triangular Chipbreaker: one-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: Turning FAQ What turning operations is this insert intended for? The Tungaloy TPMT090204 GH730 insert is intended for external and internal turning, offering a balanced geometry for both finishing and moderate roughing. How does the GH730 grade affect performance? The GH730 grade provides a mix of wear resistance and edge stability, helping the insert maintain form and reduce flank wear during continuous machining. Which holder features are required for safe clamping? Clamping compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; the insert’s cylindrical hole with countersink matches standard ISO holders. What mounting details should be noted before ordering? Note the plate thickness of 2.38 mm, the triangular form (size 09) and the cylindrical hole with a 40°–60° countersink when selecting clamping sets and replacement screws. How many usable cutting edges does the triangular insert offer? The triangular plate provides three indexable cutting edges, allowing economical rotation when a cutting edge becomes worn. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of coated cermet performance, precise geometry and secure clamping for consistent finishing and longer tool life. Order the TPMT090204 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT090204 GT9530 Tungaloy turning insert — ISO triangular insert for finishing, coated cermet, 60° geometry The TPMT090204 GT9530 is an ISO-standard triangular turning insert designed for external and internal turning, offering a coated cermet grade optimised for fine finishing and extended wear resistance. Coated cermet grade GT9530 Triangular ISO insert, 60° geometry 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent surface quality through coated cermet technology The coated cermet grade GT9530 delivers a stable surface finish and improved resistance to flank wear compared with uncoated grades. In finishing and light universal turning of steel, the combination of the coating and the insert geometry reduces the tendency to build burrs and helps maintain dimensional accuracy over longer tool life. This results in fewer in-process interruptions and a more reliable production rhythm for medium- to high-volume turning operations. Secure seating and ISO compatibility for reliable clamping Designed as an ISO triangular insert with a 60° included angle and a cylindrical hole with single-sided countersink (40°–60°), this indexable plate ensures reproducible seating and repeatable positioning in compatible holders. The defined 11° relief angle and standard tolerance classes make selection of a matching outside holder straightforward; correct pairing of holder form, size and fastening method secures the insert and minimises vibration, contributing to improved surface integrity and tool life. Economic machining by reducing downtime and tool change frequency A corner radius of 0.4 mm and a plate thickness of 2.38 mm support controlled cutting engagement and robust edge strength during finishing cuts. The one-sided chipbreaker and the coated substrate promote stable chip formation, which reduces the need for frequent interventions and tool swaps. The result is a measurable reduction in non-productive time and an improved cost-per-part ratio when machining under stable setups and appropriate cutting parameters. Contact Metav Werkzeuge for application advice or to request a quote for TPMT090204 GT9530 Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998359 Manufacturer SKU: TUN6998359 Metav SKU: 6998359-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: coated cermet Facts Corner radius: 0.4 mm Thickness: 2.38 mm Insert angle: 60° Relief angle: 11° Size: 09 ISO code: 090204 Special features Grade: GT9530 Cutting material: coated cermet Application: turning (external and internal) Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Plate form: triangular FAQ What materials is this insert suited for? The TPMT090204 GT9530 insert is formulated as a wear-resistant cermet grade for finishing and light universal turning, especially suited to machining steel under stable conditions. How does the GT9530 grade improve production? GT9530 offers improved resistance to flank wear and stable chip formation, which contributes to longer tool life and more consistent surface finish compared with standard grades. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening and size; the ISO triangular form and the cylindrical hole with countersink permit use in standard ISO-compatible triangular holders when dimensions match. Is the insert suitable for internal turning as well as external? Yes, the triangular ISO form and the 60° geometry make the insert suitable for both external and internal turning operations where finishing and controlled chip flow are required. What is the SKU and article number for ordering? The product is listed as SKU 6998359-Tungaloy with article number 6998359 for the TPMT090204 GT9530 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high surface quality, consistent edge stability and straightforward ISO compatibility for dependable turning operations; order the insert directly via Metav Werkzeuge or ask our consultants for holder compatibility and application advice. TPMT090204 GT9530 turning insert by Tungaloy — coated cermet, 11° clearance TPMT090204 GT9530 is an ISO-format indexable turning insert designed for finishing to light universal turning, offering enhanced surface finish and extended life under stable machining conditions. Coated cermet GT9530 for fine finishing Triangular 09 form with 0.4 mm corner radius 11° clearance angle for stable cutting Cylindrical hole with one-sided countersink Improved surface finish through wear-resistant grade The GT9530 grade is a coated cermet engineered for finishing and light universal turning in steel, combining ceramic hardness with metallic toughness. This composition delivers a stable cutting edge that resists abrasive wear and reduces built-up edge in steady, well-supported setups. The coating further lowers friction and helps maintain a consistent contact zone, which translates into improved surface finish and longer intervals between indexings. For operations prioritising component quality, the material and coating choices in this grade provide a measurable improvement in finished-part consistency. Secure geometry and repeatable seating for precision work A triangular insert form with a 0.4 mm corner radius and an 11° clearance angle delivers a balance between edge strength and accessibility to detail. The insert’s cylindrical hole with one-sided countersink ensures reliable clamping in compatible ISO holders; the countersink angle (40°–60°) helps centre the insert and prevents lateral movement under cutting loads. These geometric details promote repeatable positioning, which is essential for batch production and setups where tolerance adherence is critical. Compatibility with a holder is governed by form, clearance, tolerance class, mounting method, size and thickness. Optimised for turning steel in finishing and light general machining This indexable grade performs best in turning operations where a high-quality surface and predictable edge life are required. The combination of a fine corner radius and a coated cermet substrate makes the insert suitable for finishing passes and light general-purpose cuts in various steels. Selection of the appropriate chipbreaker and cutting parameters should match workpiece rigidity and machine stability to exploit the grade’s strengths. Under stable conditions and with correct speeds and feeds, the grade reduces vibration sensitivity and promotes consistent results across a production run. Easy integration into ISO insert systems and workshop routines The insert is part of the ISO indexable turning insert system and integrates with standard external holders or boring bars, plus the usual shims/clamp sets and replacement screws. Key assembly items in a typical system are the ISO-format insert, a matching external holder or boring bar, the supporting shim/clamp set and the fastening screw. Because the insert is ISO-standardised, it offers cross-compatibility across a wide range of toolholders—provided the holder matches the insert form, mounting style and tolerance class. That standardisation simplifies stocking and reduces changeover complexity in mixed-machine workshops. For precision finishing in steel, contact Metav Werkzeuge to discuss TPMT090204 GT9530 mounting options and to request tailored advice on chipbreaker and cutting data — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6998367 SKU: 6998367-Tungaloy Manufacturer SKU: TUN6998367 Designation: TPMT090204 GT9530 Manufacturer: Tungaloy Core data Corner radius: 0.4 mm Clearance angle: 11° Insert thickness: 2.38 mm Insert size: 09 Included angle: 60° Shape: triangular Special features Grade: GT9530 (coated cermet) Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning Series: ISO indexable turning inserts Material: cemented carbide FAQ Which materials is this grade best suited for? The TPMT090204 GT9530 insert is optimised for steel machining, offering excellent surface finish in finishing and light general-purpose turning operations. Can this insert be used for stainless steel and other alloys? The GT9530 grade can be applied to stainless steel and similar alloys in stable setups, but cutting data and chipbreaker choice should be adapted to the material to avoid built-up edge and to maintain tool life. How does the hole and countersink affect clamping? The cylindrical hole with one-sided countersink (40°–60°) centres the insert and improves seating stability, reducing lateral movement under load and ensuring repeatable positioning in compatible holders. What does the 0.4 mm corner radius mean for component finish? A 0.4 mm radius provides a fine but robust edge that helps achieve a smooth surface while retaining sufficient strength for light finishing cuts. Which system components are required to mount this insert? A standard ISO setup requires the insert, a matching external holder or boring bar, a shim/clamp set and the correct fastening screw; compatibility depends on the holder’s form, tolerance class and mounting type. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade GT9530 and a 0.4 mm corner radius delivers improved surface quality and extended tool life under stable cutting conditions. Choose this triangular ISO insert for finishing and light universal turning on steel, and order the TPMT090204 GT9530 directly via Metav Werkzeuge or consult our technical advisers for application matching. TPMT090204 GT9530 triangular insert for turning by Tungaloy The TPMT090204 GT9530 is an ISO‑standard triangular turning insert designed for finishing and light universal turning on steel in stable set‑ups TPMT090204 GT9530 triangular insert by Tungaloy Coated cermet grade GT9530 for improved wear life 0.4 mm corner radius for fine surface finish 11° clearance and single‑sided chipbreaker Reliable finishing and extended wear life The coated cermet composition of the GT9530 grade is engineered for wear resistance and a fine, consistent finish when machining steel under stable conditions. Cermet combines ceramic and metallic bonding phases to offer lower friction and improved edge stability compared with some conventional grades; this means fewer edge changes and longer productivity windows. By selecting an optimised grade such as GT9530, shops aiming for predictable surface quality in finishing passes benefit from reduced rework and steadier cycle times. Predictable chip control and process stability A single‑sided chipbreaker provides dependable chip formation for light to moderate depths of cut, reducing the risk of entanglement and improving evacuation in many routine turning operations. The insert’s geometry, including the 11° relief and the triangular 60° configuration, supports stable cutting angles that help maintain a constant tool‑workpiece interaction. These features contribute to a more predictable process, which is particularly valuable in batch production where repeatability and minimised setup adjustments reduce overall costs. ISO compatibility and secure mounting for the shop floor The insert follows ISO geometry conventions, which simplifies holder selection and stock management across different tool systems. Key mounting and dimensional details include the cylindrical hole with a one‑sided countersink (40°–60°), a plate thickness of 2.38 mm and the triangular size 09 form factor. These measured characteristics determine compatibility with clamping sets, screws and seatings; by checking these parameters against the chosen holder, fit‑up is straightforward and downtime for indexing or replacement is minimised. The SKU and manufacturer number assist traceability in inventory systems. Application guidance and surface quality considerations For external and internal turning where a high‑quality finish is required, the 0.4 mm corner radius offers a balance between edge strength and surface appearance. Smaller radii favour very fine finishes but need more rigid set‑ups; the GT9530 grade performs best in stable conditions with appropriate feed and speed selection. When shifting from roughing to finishing, pair the insert with a matching holder and adjust cutting data to exploit the cermet advantages—reduced built‑up edge and improved edge retention—so fewer interruptions occur and component quality remains consistent. For tailored application advice and availability of the TPMT090204 GT9530 by Tungaloy, contact Metav Werkzeuge for technical matching and delivery coordination, or request assistance from our consultants at Metav Werkzeuge Technical data Article number: 6998356 SKU: 6998356-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TPMT090204 GT9530 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Plate thickness: 2.38 mm Size: 09 Special features Coating / grade: GT9530 (coated cermet) Material: carbide Plate form: triangular Mounting hole: with cylinder hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What materials is this insert suitable for? The TPMT090204 GT9530 insert by Tungaloy is specified for machining steel in finishing to light universal applications where good surface finish and longer tool life are required. How does the GT9530 grade improve performance? The GT9530 coated cermet offers enhanced wear resistance and lower friction at the cutting edge, which supports longer continuous cutting intervals and consistent surface quality during finishing passes. Which insert features ensure easy replacement and compatibility? ISO‑standard geometry, the cylindrical hole with a one‑sided countersink, and the size 09 triangular form factor make the TPMT090204 straightforward to match with compatible holders and clamping sets. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius provides a balance of edge strength and smooth surface generation for finishing operations, provided the machining set‑up is rigid and cutting parameters are appropriately controlled. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT090204 NS9530 Tungaloy turning insert — uncoated cermet, 60° triangular The TPMT090204 NS9530 is an ISO triangular indexable insert for turning, engineered as a finishing grade for continuous cuts in steels. Uncoated cermet grade NS9530 finish Sharp cutting edge for superior surface finish 0.4 mm corner radius, 60° triangular geometry Cylindrical hole with single‑side countersink High-performance finishing for steel components Built for finishing applications, this ISO turning insert delivers low cutting forces and an exceptionally fine surface thanks to the uncoated cermet composition and a deliberately sharp cutting edge. The NS9530 grade is formulated to promote stable chip formation and reduced built‑up edge during continuous turning, which translates into fewer rework cycles and consistent component quality. As a result, machining windows can be focused on achieving surface integrity and dimensional accuracy rather than compensating for tool limitations. Precise geometry and secure clamping for repeatable results The insert’s 60° triangular geometry and 0.4 mm corner radius provide a reliable balance between edge strength and finish capability, while the 11° clearance angle supports smooth chip flow. Compatibility with ISO holders depends on form, clearance angle, tolerance class, fastening method, size and thickness; the standardised design ensures straightforward replacement in existing tool systems. The central cylindrical hole with a single‑side countersink (40°–60°) guarantees stable clamping and repeatable seating, reducing vibration and enabling more consistent finish across batches. Process benefits and recommended uses in production Designed primarily for turning steels with small depths of cut and continuous feeds, this grade excels where surface quality is the priority. The combination of low cutting forces and an optimised chipbreaker on one side reduces tool deflection and helps maintain tight tolerances on external and internal diameters. In practice, selecting this insert for finishing passes minimises downstream polishing and inspection time, supporting faster throughput and predictable cycle times in production environments. Discuss specific finishing requirements with Metav Werkzeuge to ensure the best choice of Tungaloy NS9530 inserts for the application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply. Technical data Article number: 6998535 SKU: 6998535-Tungaloy Manufacturer SKU: TUN6998535 Brand: Tungaloy Model series: ISO turning inserts Facts Geometry angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 09 Special features Uncoated cermet grade NS9530 Triangular insert shape Cylindrical hole with single‑side countersink (40°–60°) Single‑side chipbreaker Intended application: turning (finishing) FAQ What materials is this insert suitable for? The NS9530 grade is intended for finishing in steels; the uncoated cermet composition provides low cutting forces and good surface quality when used for turning operations. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius offers a balance between edge strength and fine finish capability, reducing chatter and improving surface integrity during finishing cuts. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the insert follows ISO dimensions to facilitate replacement in matching external holders or boring bars. What advantages does the uncoated cermet NS9530 provide over coated grades? Uncoated cermet like NS9530 provides a very sharp initial cutting edge and lower cutting forces, which is beneficial for continuous finishing passes where surface finish is the priority. Can this insert be used for internal turning as well as external turning? Yes; the geometry and clamping design support both external and internal turning applications provided the correct holder or boring bar is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the sharp cutting edge for low cutting forces and excellent surface quality; Order the TPMT090204 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT 090204 NS9530 Turning insert (ISO triangular) — Tungaloy The TPMT090204 NS9530 is an ISO‑normed triangular turning insert designed for finishing operations in turning applications, engineered for continuous cuts and small depths of cut. Finishing grade cermet NS9530 Sharp cutting edge for low cutting forces Single-sided chipbreaker for smooth surface ISO triangular insert with 60° geometry Consistent finishing quality and reduced cutting forces The NS9530 grade is an uncoated cermet formulated for finishing applications on Stahl, delivering a sharp cutting edge that lowers cutting forces and improves repeatable part finish. This combination reduces cutting‑induced vibration during continuous feeds and supports small depth of cut strategies, which in turn lowers secondary operations and saves cycle time. The modest corner radius of 0.4 mm is optimised for high surface quality while maintaining adequate edge strength. Selection of the single‑sided chipbreaker complements the grade for clean chip control in stable setups, translating into predictable results on turned components. ISO compatibility and straightforward tool integration Being part of the ISO turning insert family, the plate fits holders where geometry, clearance, tolerance class, fastening and thickness match. The insert’s triangular form with an included angle of 60°, 11° clearance and cylindrical hole + single‑side countersink (40°–60°) ensures secure clamping and repeatable positioning when combined with a suitable outer holder or boring bar. The standardised dimensions, including a plate thickness of 2.38 mm, simplify stocking and reduce set‑up time across production lines. When interchangeability and process stability are priorities, this ISO‑conformity supports efficient tool management and shorter machine downtime. Application strategy and productivity gains Designed primarily for external and internal turning, the insert performs best in continuous cuts and small feed/pass combinations where a high surface finish is required. The cemented carbide body provides a durable substrate and the NS9530 cermet cutting material offers a polished finish on Stahl substrates with low built‑up edge tendency. In practical use, the system comprises the insert, a compatible holder or boring bar, a locating pad/clamp set and replacement screws; matching the chipbreaker and grade to component material and machine stability delivers measurable productivity improvements and consistent part quality. For shops seeking to reduce rework and ensure predictable cycle times, this combination offers a balance of precision and tool life. Contact Metav Werkzeuge today to specify the Tungaloy TPMT090204 NS9530 finishing insert for optimal turning results or request application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998632 Manufacturer SKU: TUN6998632 Label / SKU: 6998632-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 09 Corner radius: 0.4 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Shape: triangular Application: Turning (Drehen) Material: cemented carbide FAQ What materials is this insert optimised for? The TPMT090204 NS9530 is a finishing grade optimised for machining Stahl, providing a sharp edge and low cutting forces for excellent surface finishes. Which operations suit this grade and geometry best? Continuous external and internal turning with small depths of cut are the main applications; the NS9530 grade and single‑sided chipbreaker are tuned for finishing passes. How does compatibility with holders work? Compatibility is determined by form, clearance angle, tolerance class, fastening type, size and thickness; matching these parameters ensures secure clamping for the ISO triangular insert. What advantages does the cermet grade offer over coated carbides? The uncoated cermet grade offers a sharp edge for lower cutting forces and superior surface quality in finishing, particularly on Stahl; it is aimed at continuous, light‑pass machining. Are replacement screws or clamping sets required for assembly? The cutting system comprises the insert, a matching holder or boring bar, an appropriate locating pad/clamp set and replacement screws to ensure repeatable, secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of a high-quality NS9530 cermet grade for superior surface finish and low cutting forces, combined with the ISO‑standard TPMT090204 triangular geometry for easy interchangeability and reliable clamping. Order the insert directly via Metav Werkzeuge or consult our technical team for application support. TPMT090204 NS9530 — ISO triangular turning insert for finishing steel by Tungaloy The TPMT090204 NS9530 is an ISO‑standard triangular indexable insert designed for precision turning operations, optimised as a finishing grade for steel components in continuous‑cut applications. TPMT090204 triangular ISO insert, 11° clearance NS9530 cermet grade for high surface finish 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink High‑quality finishing with low cutting forces As a purpose‑designed finishing insert, the NS9530 uncoated cermet grade delivers a sharp cutting edge and consistently low cutting forces, which translates into reduced vibration and superior surface integrity on steel. The combination of a finely honed edge and the small corner radius ensures a smooth part finish when performing light‑depth passes; this makes the insert especially suitable for continuous cuts and small feed and depth settings where surface quality is the priority. The material selection balances wear resistance with edge stability to extend productive cutting windows. Predictable chip behaviour and process stability The insert’s single‑sided chipbreaker is tailored for stable chip formation during finishing operations, reducing the risk of entangling chips and enabling reliable evacuation in typical turning setups. Compatibility with a suitable holder is governed by the insert form, 11° clearance, tolerance class, fixing method, size and thickness; matching these parameters ensures correct seat contact and repeatable cutting geometry. Process planners will benefit from fewer interruptions and consistent part tolerances when the insert is paired with a properly rated external holder or boring bar. Precise geometry for secure clamping and accuracy The triangular plate form with a 60° included angle and a 0.4 mm corner radius gives a predictable cutting profile for fine finishing. The plate thickness of 2.38 mm and the presence of a cylindrical hole with a single‑sided countersink (40°–60°) facilitate secure, repeatable clamping in standard indexable holders. As the insert conforms to ISO dimensions, it can be exchanged quickly without altering tool setting offsets, supporting reduced setup times and consistent reproducibility across production batches. Practical selection and application advice For finishing steel parts, opt for light depths of cut and modest feeds to exploit the low cutting forces and edge quality of this grade. The insert performs best in rigid tool‑holding systems with minimal overhang and controlled coolant application where required. When selecting the toolholder and clamping set, verify form and tolerance compatibility to maintain the rated cutting edge angle and to avoid misalignment. The TPMT090204 NS9530 is intended for use in external and internal turning where surface finish and dimensional accuracy are decisive. For precision finishing on steel, request the Tungaloy TPMT090204 NS9530 insert through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for personalised recommendations and availability. Technical data Article number: 6998543 SKU: 6998543-Tungaloy Manufacturer SKU: TUN6998543 Name: TPMT090204 NS9530 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Plate thickness: 2.38 mm Size: 09 Special features Material: Hartmetall (carbide) Grade: NS9530, uncoated cermet Application: Drehen (turning) Chipbreaker: single‑sided Plate form: triangular Hole: with hole — cylindrical + single‑sided countersink (40°–60°) Typical use: finishing steel, continuous cuts and small depths of cut FAQ What materials is this insert designed for? The TPMT090204 NS9530 insert is a finishing grade formulated primarily for steel; the uncoated NS9530 cermet offers optimal edge sharpness for achieving high surface quality. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a single‑sided countersink and requires a compatible ISO‑rated holder; correct clamping ensures the specified 11° clearance and secure seating for repeatable accuracy. Can this insert be used for roughing operations? This grade is optimised for finishing and continuous small‑depth passes; for heavy roughing, a more robust grade with different geometry would be preferred over the TPMT090204 NS9530. Is the insert indexable and interchangeable across holders? As an ISO‑standard triangular insert, the TPMT090204 format enables quick indexing and interchangeability when the holder matches the form, size and thickness specifications. What benefit does the 0.4 mm corner radius provide? The 0.4 mm corner radius balances edge strength with the ability to produce fine surface finishes, making the insert particularly suitable for final passes where part appearance and dimensional accuracy matter. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision finishing grade and ISO compatibility for consistent surface quality and predictable tool life; the sharp uncoated cermet edge and 11° relief angle ensure low cutting forces and excellent finishes in continuous turning operations. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TPMT 090204 NS9530 — Tungaloy indexable turning insert for finish turning, 60° triangle TPMT 090204 NS9530 is a triangular ISO indexable insert designed for finish turning applications, providing a sharp cutting edge and stable performance on continuous cuts. ISO triangular insert size 09 Uncoated cermet finishing grade NS9530 11° relief angle for low cutting forces Central hole with countersink for secure clamping Precision finishing for demanding turning tasks The insert is engineered as a finish-grade uncoated cermet to deliver exceptionally low cutting forces and a sharp edge geometry. This combination reduces vibration at small depths of cut and improves surface integrity on steel components. The construction supports continuous cutting conditions where consistent surface finish and dimensional stability are priorities. Compatibility with ISO-designated holders assures repeatable clamping and predictable performance in production environments. Designed for reliable clamping and repeatability The triangular form with a central cylindrical hole and one-sided countersink (40°–60°) provides secure and reproducible seating in compatible toolholders. Compatibility is determined by the insert shape, relief angle, tolerance class, attachment method, size and thickness, so selection of the correct holder or boring bar is essential for optimal results. The 2.38 mm plate thickness and the defined tolerance class help maintain rigidity in the tool assembly, supporting consistent chip formation under steady feed conditions. Optimised geometry and chip control for improved productivity A single-sided chipbreaker and a corner radius of 0.4 mm balance edge strength with the capacity to produce fine, easily managed chips during finishing cuts. The 11° relief angle reduces rubbing and minimises cutting forces, which is particularly beneficial when machining steels on medium- to high-stiffness setups. The result is reduced tool wear and a higher likelihood of meeting tight surface roughness specifications without frequent edge dressing. Application guidance and selection rationale The NS9530 grade is suitable as a finishing sort for steels where a sharp edge and high surface quality are required; it is optimised for continuous cutting and small depths of cut rather than interrupted operations. When replacing or specifying inserts, verify holder compatibility with the ISO designation and the insert’s geometric data — size 09, 60° included angle, 2.38 mm thickness, and the central hole configuration — to ensure accurate seating and clamping. Proper selection enhances process stability and maximises the productive life of the cutting edge. Contact Metav Werkzeuge for tailored recommendations on using the Tungaloy finishing insert and to arrange an order or technical consultation; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6998530 Manufacturer SKU: TUN6998530 SKU: 6998530-Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Countersink angle: 40°–60° Design & features Triangular plate form Central hole: cylindrical with one-sided countersink Chipbreaker: one-sided Grade: NS9530 (uncoated cermet) Application: Turning ISO compatibility; holder fit depends on form, relief angle, tolerance class, fixation, size and thickness FAQ What materials is this insert intended for? The NS9530 finishing grade is formulated for steel machining; the TPMT 090204 NS9530 insert excels in producing high surface quality on continuous steel turning operations. Which toolholders fit this ISO insert? ISO-compatible turning holders and boring bars designed for triangular TPMT 090204 inserts with size 09, 2.38 mm thickness and a central hole with countersink will provide correct seating and clamping. What cutting conditions suit the NS9530 grade? NS9530 is optimised for continuous cutting and small depths of cut where a sharp edge and low cutting forces improve surface finish and dimensional control. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius offers a balance between edge strength and fine surface generation, yielding better finish quality while maintaining sufficient edge durability for finishing passes. Is this insert suitable for interrupted cuts? The insert is primarily intended for continuous turning; interrupted cuts may demand a different grade or geometry better suited to impact resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing performance and low cutting forces from a dedicated cermet NS9530 grade in an ISO triangular format. Reliability in continuous turning processes and secure clamping ensure consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TPMT 090204 NS9530 — Tungaloy turning insert, ISO triangular, fine finishing TPMT090204 NS9530 Tungaloy is an ISO-standard triangular indexable insert designed for turning operations where low cutting forces and superior surface finish are required. Cermet grade NS9530 for fine finishing ISO TPMT 090204 triangular insert design Sharp cutting edge for low cutting forces Cylindrical hole with chamfer for secure clamping Exceptional finish and reduced cutting forces for steel turning The uncoated cermet NS9530 is formulated for finishing applications on steel, delivering a sharp cutting edge that reduces cutting forces and promotes an improved surface finish. Lower cutting forces lead to reduced spindle load and can delay flank wear, which helps to maintain dimensional accuracy during continuous turning. The combination of the material properties and geometry is aimed at small depths of cut and stable, uninterrupted cutting, so operators can expect predictable surface quality on turned components. Reliable seating and simplified tool selection for productivity Built to ISO dimensions, compatibility depends on form, relief angle 11°, tolerance class, attachment type, size and thickness; this makes selection straightforward and reduces setup time. The triangular form and the cylindrical hole with single-sided countersink (40°–60°) provide secure clamping with standard holders and boring bars. Clear ISO coding and standardised geometry mean interchangeability across tool systems, so machining centres and lathes benefit from reduced tooling complexity and faster changeovers. Geometry tuned for stability and consistent chip control The insert’s geometry combines a 60° included angle with a 0.4 mm corner radius and a plate thickness of 2.38 mm, offering a balance between edge strength and the fine cutting action required for finishing. The one-sided chipbreaker supports controlled chip formation in continuous cuts, reducing the likelihood of built-up edge and improving repeatable surface quality. These parameters help maintain component tolerances and reduce the need for secondary finishing operations. System integration and expected operational behaviour As part of a tooling system the insert pairs with a matching external holder or boring bar, plus underlay/shim sets and replacement screws as required. The modular setup supports quick insert indexing and easy maintenance, which contributes to steady production flow and predictable tool-life planning. For demanding finishing tasks, the ISO triangular format and grade selection help to maximise productivity while conserving machine resources. For original Tungaloy quality and precise finishing work, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering Technical data Article number: 6998559 Manufacturer SKU: TUN6998559 Model series: ISO-Drehwendeschneidplatten Designation: TPMT090204 NS9530 Facts Insert size: 09 Included angle: 60° Relief angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Special features Uncoated cermet grade NS9530 Triangular plate form (TPMT) One-sided chipbreaker With hole; cylindrical hole + single-sided countersink (40°–60°) Application: turning FAQ Is this insert suitable for finishing steel components? Yes. The TPMT090204 NS9530 insert is a finishing grade optimised for steel, offering a sharp cutting edge and low cutting forces that support improved surface quality in finishing passes. What holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, attachment and thickness; standard TPMT-compatible external holders and boring bars will accept the TPMT090204 geometry when dimensions and clamping match. Does the insert have a chipbreaker and what is its effect? The plate includes a one-sided chipbreaker designed to promote controlled chip formation during continuous cuts, which helps to avoid built-up edge and stabilise surface finish. How does the 0.4 mm corner radius affect machining? A 0.4 mm radius provides a compromise between a fine cutting action for finishing and sufficient edge strength to resist edge chipping, helping to maintain dimensional accuracy on turned parts. Are spare screws and underlay required for mounting? A typical system setup comprises the ISO insert, a matching external holder or boring bar, underlay/shim set and replacement screws; these components ensure secure clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, cutting-edge stability, and ISO compatibility to ensure predictable, productive turning of cast iron components; order genuine Tungaloy inserts via Metav Werkzeuge or request compatibility advice from our consultants. TPMT 090204 T5115 Tungaloy turning insert — CVD-coated carbide, triangular 60° geometry The TPMT090204 turning insert is an ISO‑standard triangular insert designed for external and internal turning, offering a balance of wear resistance and edge stability for cast iron applications. CVD-coated carbide grade T5115 ISO‑standard triangular 60° insert Optimised for cast iron machining 0.4 mm corner radius for versatile finishing Consistent performance where stable edges matter The TPMT090204 is supplied as a CVD-coated carbide insert that combines a wear-resistant coating with a robust substrate to extend tool life under interrupted cuts and variable chip loads. The coating reduces flank wear while the substrate maintains the cutting-edge stability required for repeatable dimensions in series production. For shops aiming to reduce tool-change frequency and maintain surface quality, this geometry delivers a predictable balance between tool life and surface finish. The triangular form and single-sided chipbreaker translate directly into controlled chip flow and simplified stock removal on cast iron. Mounting compatibility and practical set-up advantages Designed to the ISO insert series, this triangular 60° insert features a cylindrical central hole with a single-sided countersink (40°–60°), enabling secure clamping in compatible external holders or boring bars. The ISO standard designation ensures interchangeability with a wide range of toolholders, while the specified clearance angle and tolerances support stable seating and repeatable register. Explaining the geometry: the 60° included angle determines approach and plunge capability; the 11° clearance reduces rubbing at the flank. These factors together minimise setup variables and help stabilise the cutting process. Application focus: cast iron machining with controlled chip formation The T5115 grade is positioned as a universal grade for cast iron, offering an optimised balance between wear resistance and edge strength. The insert’s single-sided chipbreaker is tuned to produce short, segmenting chips typical for grey and nodular cast irons, improving evacuation and reducing the risk of re-cutting. With a 0.4 mm radius, the insert supports both finishing passes and modest stock removal, enabling flexibility across roughing-to-finishing sequences. In practice, this leads to fewer interruptions, consistent tolerances and predictable tool-change scheduling in production environments. Contact Metav Werkzeuge for availability and compatibility advice on Tungaloy TPMT090204 inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864804 Manufacturer SKU: TUN6864804 Model series: ISO-Drehwendeschneidplatten Material: carbide WPL designation: TPMT090204 Manufacturer item number: 6864804 Facts Angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Size: 09 Design and features CVD-coated carbide Grade: T5115 Triangular plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for turning; optimised for cast iron FAQ What materials is this insert suitable for? The TPMT090204 T5115 insert is formulated primarily for cast iron machining; the T5115 grade provides a balance of wear resistance and edge stability for grey and nodular cast irons. Which toolholders are compatible with this insert? Compatibility is determined by ISO form, free clearance angle, tolerance class, fixing method, size and thickness; the ISO‑standard triangular configuration fits holders and boring bars designed for TPMT‑style inserts. What benefit does the CVD coating provide? A CVD-coated carbide surface increases abrasion resistance and reduces flank wear, extending service life under typical turning conditions encountered when machining cast iron. How does the 0.4 mm corner radius affect results? A 0.4 mm radius offers a compromise between finishing quality and edge strength, permitting improved surface finish while maintaining resistance to edge chipping during moderate depth cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a 0.4 mm corner radius and precise ISO conformity for reliable, long-running turning of rostfreier Stahl; order the TPMT090204 T6215 insert directly via Metav Werkzeuge or consult our advisors if needed. TPMT090204 T6215 — Indexable turning insert for rostfreier Stahl by Tungaloy TPMT090204 T6215 is an ISO triangular indexable insert designed for turning operations on rostfreier Stahl, offering a wear-resistant CVD coating and geometry suited to stable or slightly interrupted cuts. CVD-coated carbide for high wear resistance 11° relief angle for stable cutting geometry Triangular insert with 0.4 mm corner radius Cylindrical hole with 40°–60° countersink for secure clamping Consistent tool life and performance for rostfreier Stahl turning The T6215 grade combines a CVD coating with a carbide substrate to deliver enhanced wear resistance and thermal stability when machining rostfreier Stahl. This construction reduces flank wear and helps maintain a predictable edge life under stable to lightly interrupted cutting conditions, which supports higher process uptime and fewer insert changes. For production environments seeking reproducible part quality, the coated substrate translates into a more consistent surface finish and lower overall tooling consumption. ISO compatibility and secure clamping for reliable set-up Designed as an ISO-standard triangular insert, the TPMT090204 matches common holder geometries where form, 11° relief angle, tolerance class, fastening method, size and 2.38 mm thickness determine compatibility. The centre cylindrical hole with a 40°–60° countersink ensures reliable clamping and repeatable seating in the pocket, while the 0.4 mm radius balances edge strength with accessible feed ranges for general turning profiles. These features simplify tooling selection and reduce set-up variability in mixed-production shops. Application guidance and operational benefits in practice A single-sided chipbreaker and the stable geometry make this insert well suited to external and internal turning where moderate stability is available. The 2.38 mm thickness contributes to rigidity, reducing vibration in long overhangs, and the triangular shape provides three cutting edges per index, lowering tooling costs per component. Selection of the chipbreaker and the T6215 grade should follow the material condition and interruption level; for tailored recommendations, Metav Werkzeuge’s application consultants offer pragmatic advice to match insert grade and chip control to the machine and workpiece setup. Contact Metav Werkzeuge for application-specific advice on the Tungaloy TPMT090204 T6215 indexable insert and to confirm stock and delivery options: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6877149 Manufacturer SKU: TUN6877149 SKU: 6877149-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPMT090204 T6215 Tungaloy-Wendeplatte Core specifications Angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 09 Features & applications Material: carbide Coating: CVD Grade: T6215 Shape: triangular Hole: cylindrical hole with countersink (40°–60°) Chipbreaker: single-sided Application: turning; suitable for rostfreier Stahl under stable to lightly interrupted cuts FAQ What materials is this insert suitable for? The TPMT090204 T6215 insert is specified for machining rostfreier Stahl and performs best under stable to slightly interrupted turning conditions. How is compatibility with a toolholder determined? Compatibility depends on the insert form, 11° relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures standardised seating and clamping. What does the T6215 grade indicate? T6215 denotes a CVD-coated carbide grade formulated for improved wear resistance and thermal stability during rostfreier Stahl turning. How does the 0.4 mm corner radius influence cutting? A 0.4 mm radius increases edge strength and helps produce consistent transitions on external profiles while permitting moderate feedrates without excessive edge stress. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T6215 Wendeplatten - Tungaloy
Benefit from CVD-coated carbide durability and a compact 60° triangular geometry that delivers reliable edge life and secure seating; order the TPMT090204 T6215 Tungaloy insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility and application advice. TPMT090204 T6215 — ISO triangular turning insert, CVD-coated carbide by Tungaloy (for external and internal turning) The TPMT090204 T6215 is an ISO-format triangular turning insert intended for turning operations, engineered for stable to lightly interrupted machining of stainless steel and compatible with a wide range of ISO holders. CVD-coated carbide for wear resistance Suitable for stainless steels under stable cutting 0.4 mm corner radius for durable edge life Triangular ISO insert with 11° clearance High-performance grade for reliable stainless-steel turning The CVD-coated T6215 grade offers a wear-resistant carbide substrate with a protective coating that extends tool life under continuous loads. In practice, this means fewer insert changes and more consistent component quality during medium- to long-run production. The coating reduces flank wear and maintains a stable cutting edge, which supports predictable process times and improved repeatability on stainless-steel parts. The design emphasises productivity and process stability, so the insert is well suited to industrial turning applications where tool life and surface finish matter. Geometry and clamping designed to support rigidity and edge security The triangular form with a nominal 60° included angle provides three indexed cutting edges per insert, while the 0.4 mm corner radius improves edge robustness for brief engagement and interrupted cuts. A clearance angle of 11° reduces rubbing on the flank and helps maintain consistent cutting conditions. The insert thickness of 2.38 mm and the central cylindrical hole with a single-sided countersink (40°–60°) ensure secure clamping in standard ISO-style bodies; correct compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness. These features together ensure stable seating and minimise vibration, translating into improved surface quality and longer usable life per cutting edge. Practical guidance for selection and use in turning operations The insert is suitable for both external and internal turning; choose the single-sided chipbreaker configuration and cutting parameters according to workpiece material, machining type and machine/tool stability. For stainless-steel components, a robust setup with tight workholding and conservative initial parameters will exploit the grade’s wear resistance while avoiding work hardening and built-up edge. The ISO-format allows flexible replacement in many common holders, and the central hole design simplifies orientation and secure fastening. For specific holder matching, chip-control needs or to select the optimal feeding and speed strategy, Metav Werkzeuge’s consultants can provide application-specific recommendations based on fixture stability and component geometry. For reliable performance on stainless steel, request application support or place an order for the Tungaloy TPMT090204 T6215 insert through Metav Werkzeuge to ensure correct holder compatibility and the best chip-control solution Technical data Article number: 6876938 Manufacturer SKU: TUN6876938 SKU: 6876938-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMT090204 T6215 Tungaloy-Wendeplatte Facts Geometry angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Material: carbide (cemented carbide) Coating: CVD Plate form: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) ISO-format insert; compatibility determined by holder form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The TPMT090204 T6215 insert is designed primarily for machining stainless steel; its CVD-coated carbide formulation provides wear resistance suited to stable or lightly interrupted turning. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and improves resistance to chipping, giving the TPMT090204 a balance between finish capability and tool life in demanding stainless-steel operations. Does the insert fit standard ISO holders and how is compatibility checked? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening style, size and thickness; the TPMT090204 follows ISO insert standards and typically fits ISO triangular bodies when these parameters match. What is the purpose of the cylindrical hole with countersink? The central cylindrical hole with a one-sided 40°–60° countersink ensures correct seating and secure clamping, which helps maintain repeatable positioning and reduces the risk of insert movement under cutting forces. Which chipbreaker should be selected for different turning conditions? The TPMT090204 is supplied with a single-sided chipbreaker; select chipbreaker geometry according to material, depth of cut and stability—Metav Werkzeuge can advise on the best chip-control variant for each application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T6215 grade and a 11° relief for predictable tool life and consistent performance when turning stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 090204 T6215 – Indexable insert for turning, Tungaloy TPMT 090204 T6215 is an ISO-standard triangular indexable insert designed for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated T6215 grade for wear resistance Optimised for stainless steel turning 11° relief angle for stable cutting geometry Triangular 09 insert with 0.4 mm nose radius Consistent wear resistance for demanding stainless steel work The CVD-coated carbide grade T6215 provides elevated wear resistance specifically tailored for machining stainless steel. Under stable or lightly interrupted cutting conditions the coating reduces flank wear and helps maintain a consistent cutting edge over longer tool life. This results in fewer tool changes and more predictable production cycles. The insert’s resistant coating also improves surface finish by limiting edge abrasion, which supports tighter tolerances in serial turning operations. Precision geometry for repeatable, accurate turning results The insert’s geometry—a triangular 09 form with an included angle of 60°, 11° relief and a 0.4 mm nose radius—supports a balance between cutting strength and detail in profile work. A 2.38 mm thickness ensures rigidity when mounted in a suitable holder, while the single-sided chipbreaker promotes controlled chip formation. These features combine to deliver repeatable dimensional accuracy and stable tool behaviour, especially important when switching between similar workpieces or when process documentation requires consistent parameters. Measurable gains in productivity and process stability Adopting this indexable insert contributes directly to enhanced productivity through reduced downtime and predictable tool consumption. The integrated single-sided chipbreaker aids in effective chip control, lowering the risk of built-up edge and improving cycle times. The robust carbide substrate paired with the CVD layer supports reliable cutting performance, which in practice increases the number of components produced per insert and stabilises machining costs across batches. System compatibility and practical guidance for tool selection The insert uses the ISO designation TPMT090204, incorporating a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in compatible toolholders. Compatibility with a given holder depends on form, relief angle, tolerance class, fastening, size and thickness; the insert is intended for standard ISO turning systems. When selecting the matching chipbreaker and grade, consider the workpiece stability and cut conditions: this grade favours applications where stainless steel machining requires wear resistance and steady cutting parameters. For tailored recommendations, technical consultation is available. For maximum wear resistance in stainless steel turning select the Tungaloy TPMT 090204 T6215 insert — contact Metav Werkzeuge for availability and precise application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6876667 Manufacturer SKU: TUN6876667 SKU: 6876667-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: TPMT090204 Facts Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 11° Included angle: 60° Size: 09 Special features Material: Carbide, CVD-coated (T6215) Shape: Triangular insert Hole: Cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: Single-sided Application: Turning, stainless steel FAQ What materials is this insert best suited for? The insert is optimised for stainless steel machining; the T6215 CVD-coated carbide grade is selected to provide wear resistance under stable to slightly interrupted turning conditions. How is the insert clamped and what hole style does it have? This indexable insert features a cylindrical hole with a single-sided countersink (40°–60°), intended for ISO-compatible clamping systems that match the insert’s form and tolerance class. Which ISO designation identifies this insert? The insert carries the ISO designation TPMT090204, indicating the plate form, size and geometry for correct holder matching. How does the chipbreaker affect machining? The single-sided chipbreaker supports controlled chip formation and removal, which improves chip control and contributes to consistent surface quality during turning. Can this insert handle interrupted cuts? The T6215 grade is suitable for stable to lightly interrupted cutting; for heavy interruptions further application-specific assessment is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, a 0.4 mm nose radius and a robust 2.38 mm plate thickness to increase productivity in medium-steel turning while maintaining process security; Order the TPMT090204 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT 090204 T9215 Turning insert (Tungaloy) The TPMT090204 T9215 is an ISO-standard triangular turning insert designed for external and internal turning in medium-steel applications, offering a balance of wear resistance and fracture toughness. CVD-coated carbide grade T9215 Triangle insert, size 09, 0.4 mm nose radius 11° clearance angle, 2.38 mm thickness Cylindrical hole with 40°–60° countersink Boosted productivity through high-wear resistance The CVD-coated carbide grade T9215 is formulated to combine wear resistance with reliable edge strength, making it well suited to continuous and slightly interrupted cuts in steels. This characteristic leads to longer tool life and fewer insert changes, which in turn reduces downtime and improves overall throughput. The coated substrate also helps maintain consistent cutting behaviour under industrial cycle conditions, supporting predictable machining performance and lower scrap rates. Geometry that balances finish and strength The triangular geometry with a 60° included angle and a 0.4 mm nose radius provides a practical compromise between surface finish and edge robustness. A smaller nose radius enhances surface quality, while the 2.38 mm plate thickness and 11° clearance angle reduce flank contact and increase rigidity at the cutting zone. These dimensional choices support stable cutting, notably when machining medium-strength steels where vibration control and edge security are essential. Simple integration with ISO toolholding systems As an ISO-standard turning insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness. The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and reliable repeatability when combined with the correct seat and clamping set. The single-sided chipbreaker geometry is matched to the grade and material group, simplifying selection for common turning tasks and helping to maintain consistent chip control. Practical application guidance for stable results Engineered for general turning of medium steels, the insert performs best when paired with a matching holder and an appropriate cutting data strategy. Select the chipbreaker and cutting parameters to suit whether the operation is finishing or more heavy-duty turning; the grade excels in productive, continuous cutting and tolerates light interruptions. The insert’s construction supports cost-effective machining by lowering the total cost per component through extended edge life and steady surface quality, backed by Tungaloy’s engineering heritage. For supply and application advice on the Tungaloy TPMT090204 T9215 insert — or to discuss holder compatibility and optimal cutting parameters — contact Metav Werkzeuge for tailored support and immediate availability Technical data Article number: 6774041 Manufacturer SKU: TUN6774041 Manufacturer: Tungaloy Model series: ISO turning inserts Facts Insert designation: TPMT090204 Grade: T9215 Material: Carbide Coating: CVD Shape: triangular (60°) Size: 09 Plate thickness: 2.38 mm Nose radius: 0.4 mm Clearance angle: 11° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Single-sided chipbreaker Designed for external and internal turning Suited to medium-steel machining, continuous to light interrupted cuts ISO-standard geometry for holder compatibility Good wear resistance with balanced fracture toughness FAQ Which materials is this insert best suited for? The TPMT090204 T9215 insert is optimised for medium steels; the CVD-coated carbide T9215 grade provides a good balance of wear resistance and toughness for continuous to lightly interrupted turning operations. How does the 0.4 mm nose radius affect performance? A 0.4 mm nose radius improves surface finish while maintaining sufficient edge strength for general turning tasks; it is a compromise between fine finish and robustness in the TPMT090204 geometry. Is special clamping hardware required for this insert? No special proprietary hardware is required, but secure fixation depends on matching the holder to the insert form, clearance angle, tolerance class, fastening style, size and thickness; the cylindrical hole with countersink ensures repeatable clamping. Can this insert handle interrupted cuts? The T9215 grade and the insert’s geometry tolerate light interrupted cuts; for heavy interruptions, select a more robust grade or a different chipbreaker suited to the stability of the setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm nose radius for fine surface quality and ISO compatibility for straightforward tool changeover; order directly via Metav Werkzeuge or consult the team for application support. TPMT090204 T9215 TPMT ISO 090204 triangular insert for turning by Tungaloy TPMT090204 T9215 is an ISO triangular indexable insert designed for external and internal turning, optimised for medium Stahl machining with a robust CVD-coated carbide grade. CVD-coated carbide grade T9215 ISO triangular insert TPMT090204 11° relief for stable cutting 0.4 mm nose radius for fine finishes Consistent performance for medium Stahl turning The triangular indexable insert delivers repeatable results in turning operations thanks to its CVD-coated carbide substrate and the wear-resistant T9215 grade. The coating increases abrasion resistance while the carbide core maintains edge stability, resulting in a balance between tool life and process reliability. Designed for continuous to light interrupted cuts, the geometry promotes a controlled chip flow which reduces heat concentration and supports stable machining of medium Stahl. The insert’s design therefore aids predictable cycle times and lowers the need for frequent tool changes. Secure seating and simple holder compatibility Compatibility with toolholders is governed by form, relief, tolerance class, fixing method, size and thickness; the ISO designation simplifies selection across standard holders. The insert features a cylindrical hole with a single-side countersink (40°–60°) for reliable clamping and exact repeatability at index changes. The triangular form and defined 11° relief minimise rubbing at the flank, allowing secure seating and consistent contact conditions. For workshops running mixed batches, this predictability reduces setup time and improves first-pass yield. Productivity gains with precise edge form A 0.4 mm corner radius supports improved surface finish without sacrificing cutting performance, while the single-sided chipbreaker encourages controlled fragmention for medium cutting depths. The combination of the T9215 grade and the insert’s geometry is tailored for high productivity in medium Stahl applications: higher cutting parameters can be employed with maintained edge integrity, translating into shorter cycle times. Operators benefit from clearer process windows and less frequent interruption for regrinding or replacement, supporting continuous production flows. For high-productivity turning with the Tungaloy CVD grade T9215 insert, contact Metav Werkzeuge for ordering and tailored application advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6774079 Manufacturer SKU: TUN6774079 SKU: 6774079-Tungaloy Material: carbide Model series: ISO-Drehwendeschneidplatten Application: Drehen Facts Insert size: 09 Included angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Special features ISO designation TPMT090204 Grade: T9215 (CVD-coated) Shape: triangular Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Compatible with ISO-standard holders Suited for continuous to light interrupted cuts Optimised for medium Stahl machining FAQ What applications is this insert suitable for? The TPMT090204 T9215 insert by Tungaloy is intended for external and internal turning, particularly suited to medium Stahl machining under continuous to slightly interrupted cutting conditions. How does the T9215 grade affect tool life? The CVD-coated T9215 grade provides increased wear resistance and fracture toughness; the TPMT090204 insert therefore maintains edge stability and supports extended operational life in production environments. Can the insert be used in standard ISO holders? Yes, the ISO designation TPMT090204 ensures compatibility with ISO-standard triangular holders when form, relief, tolerance class, fixing method, size and thickness match the holder specifications. Which surface quality can be expected with the 0.4 mm radius? A 0.4 mm corner radius on the TPMT090204 insert produces finer surface finishes while permitting productive cutting parameters, balancing finish quality and machining speed. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single-side countersink (40°–60°) provides positive seating and repeatable clamping for secure, accurate indexation of the insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide wear resistance, precise ISO 09 triangular geometry, and secure clamping features for stable, high‑productivity turning in medium‑steel applications; order directly via Metav Werkzeuge or request application advice from the technical team. TPMT090204 T9215 triangular turning insert by Tungaloy — CVD‑coated carbide, 60° geometry A TPMT090204 T9215 indexable turning insert designed for ISO‑standard turning applications, offering robust performance for external and internal turning of medium steel. CVD‑coated carbide for wear resistance ISO triangular 09 size, 60° included angle 0.4 mm corner radius for stable cutting edge With hole and countersink for secure clamping Maximised productivity for medium‑steel turning The combination of CVD‑coated cemented carbide and the T9215 grade provides a balance of wear resistance and fracture toughness that supports high productivity in continuous to lightly interrupted cuts. The insert’s triangular geometry with a 60° included angle enables multiple cutting edges per insert, reducing downtime for index changes and improving process economy. The 0.4 mm corner radius stabilises the cutting edge for consistent tool life and contributes to a predictable surface finish on turned components. Secure seating and consistent clamping for repeatable accuracy Compatibility with ISO holders is governed by form, 11° relief, tolerance class, fastening, size and thickness; the insert’s with‑hole design and cylindrical hole plus one‑sided countersink (40°–60°) ensure reliable clamping and repeatable positioning in modern toolholders. A solid clamping interface reduces micro‑vibration, which in turn preserves edge integrity and supports repeatable dimensional accuracy in batch production. As a result, set‑up times are minimised and process stability is improved. Practical selection and machining guidance for reliable results The insert is optimised for turning of medium steel, where the T9215 substrate and coating combination enable long tool life under industrial cutting conditions. Choose the one‑sided chipbreaker and the grade to match workpiece material, machining type and machine stability; a chipbreaker suited to the job promotes controlled chip flow and safer operations. For customers less familiar with insert selection, specifying the ISO code 090204, the 09 size and the 2.38 mm plate thickness simplifies procurement and integration into existing turning systems. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts like the TPMT090204 T9215 or to confirm stock and delivery options Technical data Article number: 6773977 SKU: 6773977-Tungaloy Manufacturer SKU: TUN6773977 Model series: ISO-Drehwendeschneidplatten Designation: TPMT090204 T9215 Tungaloy insert Dimensions & core data Size: 09 Shape: triangular Corner radius: 0.4 mm Thickness: 2.38 mm Included angle: 60° Relief angle: 11° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Materials & features Material: cemented carbide (Hartmetall) Coating: CVD‑coated carbide, grade T9215 Chipbreaker: one-sided Application: turning; external and internal turning Suitable for: medium steel, continuous to light interrupted cuts FAQ Which materials are best suited for this insert? The TPMT090204 T9215 indexable insert is engineered for medium steel machining; the CVD‑coated carbide and T9215 grade combine wear resistance and toughness for typical turning operations. How does the insert secure in the toolholder? Clamping is achieved via the insert’s hole with cylindrical bore and one‑sided countersink (40°–60°); compatibility with ISO holders is defined by form, relief angle, tolerance class, fastening method, size and thickness, ensuring reliable seating. What advantages does the T9215 grade provide? Grade T9215 offers a high level of wear resistance together with fracture toughness, making it a strong choice for productive turning where continuous to slightly interrupted cuts occur. When should the one‑sided chipbreaker be selected? The one‑sided chipbreaker is recommended when controlled chip formation and evacuation are priorities; pairing the chipbreaker with the T9215 grade and appropriate geometry supports stable cutting and surface finish. Is the insert compatible with standard ISO toolholders? Yes; the ISO‑coded 090204 designation and the triangular 09 size align with common ISO toolholder specifications, enabling straightforward replacement and integration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and robust universal grade T9225 to maintain steady production under changing engagement conditions; precise geometry and a through-hole with countersink ensure secure mounting and reliable chip control. Order the TPMT090204 T9225 indexable insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 090204 T9225 Tungaloy indexable insert for turning (triangle, 60°) A TPMT090204 T9225 indexable insert engineered for external and internal turning, offering a robust universal grade for medium-to-heavy steel machining and stable chip control in interrupted cuts. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Triangle 60° shape with 0.4 mm corner radius Through-hole with cylindrical hole and one-sided countersink High-performance machining with predictable results The insert delivers consistent cutting performance through its CVD-coated carbide substrate and the T9225 grade, designed for stability under variable engagement. The CVD coating reduces flank wear and supports longer tool life, while the universal composition balances hardness and toughness to resist chipping during lightly interrupted cuts. These attributes translate into fewer tool changes, reduced downtime and a measurable improvement in throughput for batch and single-part production alike. Secure mounting and precise geometry for repeatable accuracy The triangular geometry with a 60° included angle and a 0.4 mm corner radius provides a versatile cutting edge for a wide range of turning tasks. The insert features a cylindrical through-hole with a one-sided countersink (40°–60°), enabling secure clamping and consistent seat positioning in ISO toolholders. A 11° relief angle helps to manage cutting forces and avoid edge rubbing, which supports repeatable part accuracy even during extended runs. Designed for practical workshop use and straightforward integration Compatibility follows ISO standards for turning inserts; fit is determined by form, relief, tolerance class, fixation and thickness. The 2.38 mm plate thickness and standard 09 size make the insert suitable for common external and internal turning holders. The single-sided chipbreaker promotes controlled chip formation when paired with appropriate feeds and depths of cut, simplifying parameter selection for machinists and reducing trial-and-error during process setup. Clear material guidance and application advantages This grade is a robust universal solution for machining steel, recommended where varying cutting conditions demand extra toughness. The insert is optimised for medium-to-heavy steel machining, offering a balance between tool life and productivity. For customers less familiar with technical terms: CVD coating means the wear-resistant layer is deposited chemically during production, improving heat resistance and adhesion; the result is longer usable life and better surface finish in many standard turning tasks. For dependable medium-to-heavy steel turning and tailored advice, contact Metav Werkzeuge for ordering and application support regarding the Tungaloy TPMT090204 insert Technical data Article number: 6781059 Manufacturer SKU: TUN6781059 Brand: Tungaloy Model series: ISO turning inserts Core specifications Insert size: 09 Thickness: 2.38 mm Included angle: 60° Relief angle: 11° Corner radius: 0.4 mm Features & applications Material: carbide (CVD-coated) Grade: T9225 — universal for medium to heavy steel Hole: cylindrical with one-sided countersink (40°–60°) Geometry: triangular, single-sided chipbreaker Typical use: external and internal turning FAQ What materials is this insert best suited for? The TPMT090204 T9225 insert is optimised for steel and performs well in medium-to-heavy steel machining due to its T9225 carbides grade and CVD-coated surface. Is the insert compatible with ISO turning holders? Yes, the TPMT090204 follows ISO turning insert standards; compatibility depends on holder form, relief angle, tolerance class, fixation and thickness. How does the CVD coating benefit tool life? The CVD-coated carbide on the TPMT090204 improves wear resistance and heat tolerance, which often results in extended tool life and more consistent surface finishes. Can this insert handle interrupted cuts? The robust universal grade T9225 is formulated to provide increased toughness for applications with lightly interrupted cuts and variable engagement conditions. What mounting features ensure a secure fit? The insert includes a cylindrical through-hole with a one-sided countersink (40°–60°), enabling secure clamping and reliable seating in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9225 Wendeplatten - Tungaloy
Take advantage of the reliable combination of a CVD-coated carbide T9225 grade and a precise 0.4 mm corner radius for robust medium-to-heavy turning operations; order directly via Metav Werkzeuge or ask the consultants for application support. TPMT090204 T9225 — Turning insert for medium-to-heavy steel (Tungaloy) A TPMT090204 T9225 indexable turning insert intended for medium-to-heavy steel turning, ISO-compliant triangular geometry with 11° relief and a 0.4 mm corner radius. CVD-coated carbide T9225 for steel machining ISO triangle insert, 60° cutting geometry 0.4 mm corner radius for robust finishes Cylindrical hole with single-sided countersink Consistent cutting performance under variable conditions The CVD-coated carbide grade T9225 is formulated for a balance of toughness and wear resistance, delivering stable cutting in medium-to-heavy steel turning. This composition reduces the risk of premature edge failure when facing slight interruptions or changing engagement conditions, so the cutting edge remains dependable across shifts. The insert’s robustness supports efficient material removal rates while keeping flank wear predictable, which helps maintain process stability and reduces unexpected stoppages. Precision geometry that enhances surface quality and strength A 60° triangular geometry combined with an 11° relief angle and a 0.4 mm corner radius provides a compromise between cutting strength and surface finish. The acute geometry allows economical insert indexing, while the corner radius gives extra edge support for finishing passes without sacrificing stability during heavier cuts. These geometric parameters contribute directly to improved dimensional control and repeatable surface quality when machining medium-to-heavy-grade steels. Secure clamping and straightforward integration in ISO systems Designed as an ISO-compliant insert, compatibility with toolholders depends on form, relief, tolerance class, fastening and size — the standardised format simplifies selection and reduces setup ambiguity. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure seating and reliable clamp engagement, enabling consistent axial and radial positioning in the holder. This predictable clamping reduces indexation errors and supports a safer, more reliable tool change routine. Better chip control and reduced downtime through simple handling The single-sided chipbreaker geometry promotes controlled chip formation and evacuation during turning, leading to fewer interruptions at the tool–workpiece interface and less risk of re-cutting chips. Combined with the insert’s thickness and size, this contributes to a stable cutting process and economical tool changes. The standardised format facilitates quick replacement and inventory management, helping shops keep cycles running and minimise the time spent on insert handling. Contact Metav Werkzeuge for application advice or to request the TPMT090204 T9225 turning insert from Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and fast supply Technical data Article number: 6780997 SKU: 6780997-Tungaloy Manufacturer SKU: TUN6780997 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Geometry: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 09 Features and suitability Grade/coating: T9225 (CVD-coated carbide) Insert shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning (external and internal) FAQ What materials is this insert best suited to machine? This insert, the TPMT090204 T9225 by Tungaloy, is optimised for medium-to-heavy steel turning where toughness and wear resistance are required. How does the insert secure in the holder? The insert uses a cylindrical hole with a single-sided countersink; this ensures secure seating and repeatable clamping in compatible ISO turning holders. Can the insert cope with interrupted cuts? Yes. The T9225 grade and the 0.4 mm corner radius provide enhanced toughness that tolerates light interruptions and varying engagement conditions. What benefits does the chipbreaker deliver? The one-sided chipbreaker promotes predictable chip flow and evacuation, reducing the likelihood of chip re-cutting and helping to maintain continuous cutting performance. Is this insert compatible with standard ISO toolholders? The triangular ISO format of the insert is compatible with holders that match form, relief, tolerance class, fastening, size and thickness; ensure holder specifications align with the insert geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade engineered for toughness and the ISO-standard TPMT090204 geometry for reliable medium to heavy steel turning; order the insert via Metav Werkzeuge or contact their consultants for selection support. TPMT 090204 T9225 – ISO triangular indexable insert for turning, CVD-coated carbide by Tungaloy The TPMT 090204 T9225 is an ISO-standard triangular indexable insert designed for turning applications on steel; it pairs a CVD-coated carbide substrate with a robust universal grade for stable performance under variable engagement conditions. CVD-coated carbide grade T9225 Designed for medium to heavy steel turning ISO TPMT090204 triangular geometry 60° included angle, cylindrical hole Reliable performance when cuts vary and conditions change This indexable insert is designed to deliver consistent cutting under interrupted and varying cuts thanks to the T9225 carbide grade and its CVD-coated carbide layer. The coating improves wear resistance while the substrate provides the toughness required for medium to heavy steel turning, reducing the frequency of edge failure. The result is more predictable machining cycles and fewer unplanned tool changes, supporting continuous production and a smoother process flow. Secure clamping and straightforward replacement for fast tool changeovers Configured with a cylindrical hole and a single-sided countersink (40°–60°), the geometry ensures exact seating and repeatable clamp force in ISO holders compatible with TPMT inserts. The triangular form with a 60° included angle and a corner radius of 0.4 mm enables multiple effective cutting edges per insert, simplifying indexing and minimising downtime during tool replacement. Clear mechanical compatibility reduces set-up time and supports stable cutting, even when holders or mounting components differ slightly in tolerance. Productivity gains from controlled chip formation and extended tool life The single-sided chipbreaker, matched to the grade and intended cutting conditions, promotes stable chip formation and effective evacuation. Combined with the CVD coating, this leads to improved surface finish and extended tool life, lowering the cost per component in medium to heavy machining tasks. For shops that prioritise throughput and repeatability, the synergy between coating, substrate and chip control translates into measurable productivity benefits without sacrificing process reliability. Practical application guidance for turning operations Ideal for external and internal turning operations on a range of steels, the insert is best used in setups where interrupted cuts or variable engagement demand a compromise between toughness and wear resistance. The ISO-standard form makes selection of a matching holder straightforward; choose a holder that accommodates the plate’s thickness of 2.38 mm and secures the plate with the specified hole and countersink arrangement. When combined with appropriate feeds and cutting strategies, the system promotes reproducible results and predictable maintenance intervals. Contact Metav Werkzeuge for expert guidance on selecting the right Tungaloy TPMT 090204 T9225 insert for specific steel turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability Technical data Article number: 6781111 SKU: 6781111-Tungaloy Manufacturer article number: TUN6781111 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9225 (CVD-coated carbide) Application: Turning Facts Included angle: 60° Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Plate size: 09 Versions / Special features Triangular plate form With hole: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker ISO TPMT090204 designation Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suited for? This insert in grade T9225 is formulated primarily for medium to heavy steel turning applications and performs well where a balance of wear resistance and toughness is required. Is the TPMT090204 compatible with standard ISO holders? Yes; the ISO TPMT090204 geometry, the cylindrical hole and the specified countersink enable compatibility with ISO TPMT holders that match form, clearance angle and thickness. How many cutting edges are available per insert? The triangular shape with three corners offers multiple indexable cutting edges; the actual number of usable edges depends on whether all corners are used and on the chosen corner radius. What benefit does the CVD coating provide? The CVD-coated carbide surface increases wear resistance and heat tolerance, supporting longer life in abrasive or elevated-temperature turning operations while maintaining toughness in the substrate. Can this plate handle interrupted cuts? Yes; the T9225 grade is a robust universal grade intended to withstand variable engagement and light interruptions while maintaining stable chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9225 Wendeplatten - Tungaloy
Achieve consistently productive turning by combining the CVD-coated cemented carbide grade T9225, the TPMT090204 60° triangular geometry and a 0.4 mm nose radius for controlled finishes and reliable edge life; order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. TPMT090204 T9225 TPMT turning insert for turning by Tungaloy — CVD-coated carbide, 60° triangular shape TPMT090204 T9225 is a robust ISO-format indexable insert designed for external and internal turning in medium to heavy steel applications, offering secure clamping via a central hole with a one-sided countersink. TPMT090204 60° triangular geometry CVD-coated cemented carbide T9225 grade One-sided chipbreaker for reliable chip control Central hole with 40°–60° countersink Proven productivity in medium to heavy steel turning The CVD-coated cemented carbide grade T9225 delivers a balanced combination of wear resistance and toughness that suits variable cutting conditions and light interruptions. The coating enhances flank and crater life, so machining runs remain productive over longer sequences. With the 0.4 mm nose radius and robust substrate, the insert supports both finishing and semi-roughing passes while keeping tooling costs under control through consistent edge life and predictable wear behaviour. Stable chip control and edge reliability for intermittent cuts The one-sided chipbreaker geometry is optimised for effective chip evacuation and to reduce built-up edge formation during tougher cuts. Paired with the 60° triangular shape, the insert provides multiple indexing positions, increasing usable edges per insert and lowering per-part tooling cost. The combination of geometry and substrate toughness makes this insert suitable where varying engagement or light interruptions occur, maintaining surface quality and dimensional stability. Clear compatibility and secure clamping for workshop use Supplied in the ISO format, the insert’s fit to a holder is defined by its form, 11° relief angle, tolerance class, fastening method, size and thickness. The centre hole is cylindrical with a one-sided countersink (40°–60°), allowing secure clamping with standard screws and locating pads. This configuration simplifies holder selection and ensures repeatable seating, which supports consistent cutting conditions across multiple insert changes and reduces setup variation. Practical specifications that streamline tool planning Key dimensions such as 2.38 mm thickness, size 09, and the 60° corner angle allow straightforward integration into standard external holders and boring bars. The insert’s ISO designation and consistent manufacturing tolerances make tool management simpler: spare inserts can be stocked with confidence and rotated as required to maximise value. Technical clarity on these parameters supports predictable process planning and efficient inventory control. For application-specific advice or to secure supply of the TPMT090204 T9225 turning insert from Tungaloy, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and recommended cutting data Technical data Article number: 6781173 SKU: 6781173-Tungaloy Manufacturer SKU: TUN6781173 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall ISO designation: TPMT090204 Numbers / Core technical data Corner angle: 60° Nose radius: 0.4 mm Relief angle: 11° Thickness: 2.38 mm Size: 09 Special features / Versions Grade: T9225 (CVD-coated cemented carbide) Chipformer: one-sided chipbreaker Hole style: cylindrical hole with one-sided countersink (40°–60°) Plate shape: triangular Application: external and internal turning FAQ What materials is this insert suitable for? The TPMT090204 T9225 turning insert is developed for medium to heavy steel machining where toughness and wear resistance are required; the T9225 grade balances both properties for robust performance. How does the central hole affect clamping? The central cylindrical hole with a one-sided countersink (40°–60°) on the TPMT090204 enables secure seating in standard holders and ensures repeatable clamping for stable turning operations. How many usable edges does the triangular insert provide? The 60° triangular shape offers multiple indexing positions; each corner can be indexed to present a fresh cutting edge, maximising the number of usable edges per insert. Is the insert suitable for interrupted cuts? Yes. The CVD-coated T9225 grade and the insert’s geometry provide enhanced toughness and chip control, making it appropriate for slightly interrupted or variable engagement conditions. Which holder types are compatible with this ISO insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening and size; the TPMT090204 fits standard external holders and boring bars designed for ISO triangular inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide robustness and a 0.4 mm nose radius for dependable medium-to-heavy steel turning; order the TPMT090204-PSS T9225 directly via Metav Werkzeuge or consult the specialists for application-specific selection. TPMT090204-PSS T9225 — ISO turning insert TPMT 090204 T9225 by Tungaloy, CVD-coated carbide, 11° relief A TPMT090204-PSS T9225 indexable turning insert designed for medium to heavy turning operations, compatible with ISO holders when form, relief angle and size are matched CVD-coated carbide for high wear resistance Universal grade for medium–heavy steel machining 11° relief angle for versatile cutting engagement 0.4 mm nose radius for strong cutting edge Reliable performance for variable turning conditions The CVD coating and T9225 grade combine to deliver a balance of wear resistance and toughness, making the insert suitable for interrupted cuts and fluctuating engagement. The carbide substrate under the coating provides a secure edge that maintains form under load, while the coating reduces flank wear and extends tool life. For production environments where cycle times and consistent component quality matter, this configuration supports stable machining and predictable tool-change intervals. Compatibility explained: selecting the correct holder and setup Compatibility with a clamping system depends on insert form, 11° relief angle, tolerance class, fixing method, size and thickness. The triangular TPMT geometry and the specified ISO code require a matching insert seat and clamping screw arrangement. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures positive location and allows straightforward replacement on compatible external holders or boring bars. Specifying the correct holder reduces runout and improves repeatability in serial production. Practical benefits for workshop productivity With a 0.4 mm nose radius and the PSS chipbreaker, the insert supports predictable chip formation and a surface finish suitable for many turned components. The combination of robust universal grade and engineered chip control reduces the need for frequent parameter adjustment, enabling faster set-up and fewer interruptions. For manufacturers aiming to increase throughput while maintaining dimensional accuracy, this insert provides a pragmatic compromise between life and edge stability. What the technical terms mean for everyday use CVD refers to a chemical vapour deposition process that bonds a protective layer onto the carbide substrate, enhancing wear resistance without sacrificing toughness. The ISO designation indicates standardised geometry and tolerances that simplify replacement across compatible toolholders. The PSS chipbreaker is a predefined geometry on the cutting face that helps direct chips away from the cutting zone; this reduces the risk of re-cutting and improves process security. These elements together make the insert a dependable choice when machining varying steel grades. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts and to confirm holder compatibility, delivery options and stocking; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical Data Article number: 6781229 Manufacturer SKU: TUN6781229 Model series: ISO turning inserts Designation: TPMT090204-PSS T9225 Shape: triangular (TPMT) Size: 09 Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 11° Insert angle: 60° Facts Material: carbide Coating: CVD Grade: T9225 Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: PSS Special features Universal grade for medium–heavy steel machining Suitable for interrupted cuts and varying engagement ISO-standard geometry for broad holder compatibility Robust edge stability and predictable chip control FAQ What materials is this insert suited for? The TPMT090204-PSS T9225 is formulated as a universal grade for medium to heavy steel machining and handles interrupted cuts where additional toughness is required. How is holder compatibility ensured for this insert? Compatibility depends on insert form, 11° relief angle, tolerance class, fixing method, size and thickness; matching these parameters with the holder ensures correct seating of the TPMT090204-PSS T9225. What is the function of the PSS chipbreaker? The PSS chipbreaker on this insert promotes controlled chip formation and evacuation, improving machining stability and surface integrity when using the TPMT090204-PSS T9225. Can the insert handle interrupted cuts? Yes, the T9225 grade and CVD-coated carbide construction provide the toughness and wear resistance needed for interrupted turning operations. Which SKU should be ordered for this Tungaloy insert? Order using article number 6781229 or manufacturer SKU TUN6781229 to ensure the correct TPMT090204-PSS T9225 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and proven PVD coating to maintain process stability when turning stainless steels; the precise 60° geometry and a 0.8 mm corner radius support consistent surface quality and longer tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPMT 090208 AH6225 Turning insert — Tungaloy TPMT090208 AH6225 A TPMT090208 AH6225 ISO triangular insert designed for medium-duty turning of stainless steels, offering a balanced combination of edge sharpness and wear resistance for external and internal turning applications Triangular ISO insert TPMT 090208 AH6225 PVD-coated carbide for stainless steels 0.8 mm corner radius for controlled cuts Cylindrical hole with single countersink Consistent cutting performance for demanding stainless-steel turning The PVD-coated carbide grade AH6225 is engineered for a stable, sharp cutting edge under varying conditions, which makes it particularly suitable for machining stainless steels. The coating enhances wear resistance and reduces built-up edge, while the substrate material delivers toughness to withstand interruptions and moderate engagement. As a result, the insert supports reliable chip control with the one-sided chipbreaker, improving repeatability and reducing scrap in serial production. This technical combination reduces the frequency of tool changes and helps to stabilise process windows on conventional and CNC lathes. Robust geometry and secure clamping for repeatable accuracy Built to the ISO triangular form with a defined included angle of 60°, this insert features a clearance angle of 11° and a plate thickness of 2.38 mm, creating a rigid cutting edge that resists deflection. The cylindrical hole with single countersink (40°–60°) ensures reproducible seating and torque transmission in compatible holders, so clamping repeatability is high. The precise 0.8 mm corner radius balances edge strength and surface finish, allowing for controlled engagement when turning contours or shoulders. Compatibility is determined by insert shape, relief angle, tolerance class, mounting and size, enabling integration into standard ISO holders and tooling systems. Production benefits: longer life, steady surface finish and efficient chip control An insert that combines the AH6225 substrate with a PVD coating achieves extended tool life under medium cutting conditions typical for stainless-steel turning. The one-sided chipbreaker helps produce predictable chips and reduces the risk of tangling on long runs. Together, these features contribute to improved productivity by lowering downtime for tool changes and by delivering a more consistent surface finish, which reduces downstream rework. Selecting the correct chipbreaker and grade for the workpiece material and rigidity of the set-up is recommended to fully exploit these advantages and to keep machining stable across batch production. For application advice or to request stock and delivery details for the Tungaloy turning insert (SKU TUN6831097 / Article 6831097), contact Metav Werkzeuge quoting the SKU for tailored recommendations and fast processing. Technical Data Article number: 6831097 Manufacturer SKU: TUN6831097 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMT090208 AH6225 Core specifications Size: 09 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole + single countersink (40°–60°) Features and applications PVD-coated carbide grade AH6225 One-sided chipbreaker For turning of stainless steels ISO triangular plate, compatible with ISO holders Suitable for external and internal turning Stable cutting edge for medium-duty machining FAQ Is this insert suitable for machining stainless steels? The TPMT090208 AH6225 insert is formulated for stainless steels, the AH6225 grade and PVD coating providing improved wear resistance and edge stability for such materials. Which holder types are compatible with this insert? Compatibility is determined by the ISO triangular form, 60° geometry, plate size and thickness; the insert is designed for standard ISO triangular holders that accept TPMT 09 plates. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius offers a compromise between edge strength and surface finish, enabling controlled engagement on shoulders and external turning while reducing the risk of premature chipping. Can this insert be used for internal turning as well as external turning? Yes, the plate is suitable for both external and internal turning operations when mounted in an appropriate holder and when cutting conditions match the grade and geometry. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with single countersink (40°–60°) ensures consistent seating and secure clamping, which supports repeatable positioning and stable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com