TPMT 110308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of high process security, universal PVD-coated carbide grade AH725, and precise ISO geometry for consistent turning results; order the insert via Metav Werkzeuge or consult the team for application guidance. TPMT 110308 AH725 TPMT 110308 triangular turning insert for Drehen by Tungaloy TPMT110308-PSS AH725 is an ISO-standard triangular insert for external and internal turning, designed for stable chip control and reliable performance on steel and stainless steels. TPMT 110308 AH725 triangular insert PVD-coated carbide for reliable wear resistance PSS chipbreaker for secure chip control 60° geometry with cylindrical hole and countersink Reliable cutting performance for stable production The combination of PVD-coated carbide and the AH725 grade delivers a wear-resistant cutting edge suitable for demanding turning tasks. The plate’s PSS chipbreaker promotes predictable chip formation, reducing interruptions in automated or manual machining cycles. With a 0.8 mm corner radius and a 60° geometry, the insert provides a balance between edge strength and dimensional control, which supports consistent surface finish and extended tool life. These technical characteristics translate directly into fewer tool changes and higher uptime on the shop floor. Smooth integration into ISO tooling systems Designed as an ISO standard turning insert, the item fits established holders when form, clearance angle, tolerance class, fastening method, size and thickness align. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping in compatible toolholders, while the 3.18 mm thickness and 11 mm plate size make it appropriate for compact tool assemblies where rigidity is essential. Clear specification of these dimensions simplifies tool planning and reduces the need for trial-and-error during fixture setup. Versatile grade for mixed-material shops The AH725 grade is a universal, fracture-resistant option optimised for a broad range of steels and stainless steels, especially where workpiece material changes occur frequently. The insert is particularly suitable for smaller tooling configurations and applications requiring high process security. By selecting this grade with its PSS chipbreaker, shops gain improved chip control across varied feed rates and depths of cut, helping to maintain cycle times and surface integrity when machining mixed batches or short production runs. Practical benefits for process engineers and operators Adopting this insert reduces set-up variability and supports reproducible results thanks to consistent edge geometry and a robust coating system. The grade’s balance between toughness and wear resistance helps address edge chipping in interrupted cuts and offers a degree of tolerance to fluctuating cutting conditions. In production environments where predictability is critical, these attributes help to lower scrap rates and support more efficient scheduling of tool changes and maintenance. For application advice or to request availability of the Tungaloy TPMT110308-PSS AH725 turning inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast delivery coordination Technical data Article number: 6864955 Manufacturer SKU: TUN6864955 SKU: 6864955-Tungaloy Model series: ISO-turning inserts Brand: Tungaloy Data Corner radius: 0.8 mm Thickness: 3.18 mm Plate size: 11 mm Geometry angle: 60° Clearance angle: 11° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Grade/coating: AH725, PVD-coated carbide Chipbreaker: PSS Plate form: triangular Application: external and internal turning Compatibility: ISO-standard, holder compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Suitable materials: steel and stainless steels FAQ What materials is this insert best suited for? The Tungaloy TPMT110308-PSS AH725 insert is formulated for machining steel and stainless steels, offering a universal, fracture-resistant performance across these material groups. How does the PSS chipbreaker affect machining? The PSS chipbreaker on the TPMT110308-PSS promotes controlled chip formation, which reduces the risk of entanglement and improves process reliability during external and internal turning. What are the critical dimensions to check for holder compatibility? Key dimensions for compatibility with a holder are the plate size (11 mm), thickness (3.18 mm), corner radius (0.8 mm), geometry angle (60°) and the hole style (cylindrical hole with a countersink 40°–60°). Is AH725 suitable for small-diameter tooling? Yes, the AH725 grade is optimised for smaller tooling and applications where high process security is required, delivering a balance of toughness and wear resistance. Which standard ensures interchangeability with holders? The insert conforms to ISO standards for turning inserts; compatibility is ensured when the holder matches form, clearance angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 AH725 Wendeplatten - Tungaloy
Take advantage of a compact, ISO‑standard solution that combines PVD‑coated carbide durability with reliable chip control for consistent turning results; its 0.8 mm corner radius and PS chipbreaker support stable edge life and predictable surface finish. Order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for application support. TPMT110308-PS AH725 TPMT 110308 AH725 indexable turning insert — Turning application (Tungaloy) A TPMT110308-PS AH725 indexable turning insert engineered for general turning of steel and stainless steels, offering a compact triangular form with a chipbreaker tailored to secure process stability. TPMT110308-PS AH725 indexable insert PVD-coated carbide for steel and stainless steel 0.8 mm corner radius for reliable edge strength Triangular ISO insert, 3.18 mm thickness, with hole Consistent performance through PVD‑coated carbide and AH725 grade The combination of the AH725 grade and PVD‑coated carbide provides a balanced mix of wear resistance and toughness, making the insert suited to variable production environments. The coating reduces adhesive wear and enhances thermal stability, which translates into longer tool life and fewer interruptions in the machining process. For workshops facing mixed batches of materials, this material pairing supports process security and reduces the need for frequent tool changes, improving overall machine uptime. Predictable clamping and ISO compatibility for repeatable setups Designed as an ISO turning insert, the triangular geometry and the specified hole with a cylindrical bore plus single‑side countersink (40°–60°) ensure consistent interface with standard holders. The defined relief angle of 11°, plate thickness of 3.18 mm, and the ISO size designation create repeatable mounting and clamping behaviour, simplifying tool changeover and dimensional control in serial production. This standardisation reduces setup variability and supports consistent component tolerances across batches. Chip control, edge security and application suitability The integrated PS chipbreaker is optimised for controlled chip formation during external and internal turning, reducing the risk of entanglement and improving surface quality. The 0.8 mm corner radius strengthens the cutting edge, giving a balance between finish capability and edge robustness for typical turning tasks. Recommended for general turning of steel and stainless steels, the insert is especially beneficial where process reliability and a wide material range are required; its universal nature means fewer tool variants need stocking while maintaining high productivity. Contact Metav Werkzeuge for an application check and to secure Tungaloy TPMT110308-PS AH725 inserts for your next turning projects Technical data Article number: 6856679 Manufacturer SKU: TUN6856679 SKU: 6856679-Tungaloy Designation: TPMT110308-PS AH725 Model series: ISO turning inserts Core dimensions Size: 11 Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Hole style: cylindrical hole + single-sided countersink 40°–60° Grade/coating: AH725 (PVD-coated carbide) Special features Triangular plate form PS chipbreaker for controlled chips ISO‑standard insert for external and internal turning Suitable for steel and stainless steels System: insert, external holder or boring bar, clamping pad and spare screws FAQ What materials is this insert suitable for? The TPMT110308-PS AH725 insert is designed primarily for steel and stainless steels, the AH725 grade providing a universal, breakage‑resistant solution for variable material work. How does the PS chipbreaker affect machining? The PS chipbreaker on the TPMT110308-PS AH725 promotes short, controllable chips and reduces the risk of chip interference, which helps to maintain surface quality and unattended run times. Will this insert fit standard ISO turning holders? Yes, the TPMT110308-PS follows ISO geometry; the triangular form, hole style and dimensions are compatible with ISO‑compliant external holders and boring bars when correct clamping components are used. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength for improved resistance to chipping while still allowing good surface finish in routine turning operations with the TPMT110308-PS AH725. Is the product supplied as original Tungaloy stock? The listed item is original and new, referenced under manufacturer article number 6856679 and SKU 6856679‑Tungaloy as specified. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 AH8005 PS Wendeplatten - Tungaloy
Benefit from the combination of the PVD-coated AH8005 grade and a 0.8 mm corner radius for extended tool life and consistent surface finish when machining heat‑resistant alloys and hard materials. The ISO triangular form with a 11° clearance and centring hole guarantees repeatable mounting and stable cutting. Order the TPMT110308-PS AH8005 directly via Metav Werkzeuge or request application advice from our technical consultants. TPMT110308-PS AH8005 — ISO triangular turning insert, PVD-coated carbide TPMT110308-PS AH8005 is an ISO‑standard triangular turning insert designed for demanding external and internal turning where wear resistance and process stability are required PVD-coated carbide AH8005 for high wear resistance Triangular ISO insert with 0.8 mm corner radius 11° clearance angle for stable cutting Centring hole with 40°–60° countersink Stable cutting and reliable chip control for tough materials The insert grade is PVD-coated AH8005, a wear‑resistant carbide designed for machining heat‑resistant alloys and other hard materials under stable cutting conditions. Combined with the PS chipbreaker, this geometry promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and unexpected tool failure. The result is a predictable process that supports higher material removal rates and fewer interruptions for regrinding or tool change, which in turn improves overall machining efficiency. Fast, repeatable clamping and ISO compatibility Manufactured to ISO dimensions, the triangular insert features a centring provision: a cylindrical hole with a single‑side countersink (40°–60°) and a plate thickness of 3.18 mm, ensuring a positive fit in the corresponding holders. The 11° clearance and the triangular form simplify seating and orientation, shortening setup time and lowering the chance of misalignment. For production environments that change operations frequently, this predictability reduces setup variance and supports consistent part quality across shifts. Better surface quality and longer in‑service intervals With a 0.8 mm corner radius, this insert balances edge strength and surface finish: small radii increase edge robustness in interrupted cuts while still producing an acceptable finish on most turned components. The PVD coating enhances wear resistance, especially at elevated temperatures, which translates into longer intervals between insert changes and less operator intervention. As a result, machining becomes more economical through reduced tooling costs per part and a steadier production flow. For expert guidance on applying the Tungaloy TPMT110308-PS AH8005, stock availability or to determine the optimal chipbreaker and holder pairing for a specific turning task, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical team will advise on the best configuration for reliable machining. Technical data Article number: 6748254 Manufacturer SKU: TUN6748254 Model series: ISO turning inserts Designation: TPMT110308-PS AH8005 Material: Carbide Grade/coating: AH8005 PVD-coated Chipbreaker: PS Core specifications Corner radius: 0.8 mm Plate thickness: 3.18 mm Clearance angle: 11° Included angle: 60° ISO code: 110308 Size: 11 Features and mounting Triangular plate form With hole: cylindrical hole + single‑side countersink (40°–60°) Suitable for external and internal turning Recommended for heat‑resistant alloys and hard materials Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TPMT110308-PS AH8005 is intended for machining heat‑resistant alloys and other hard materials; the AH8005 PVD‑coated carbide offers improved wear resistance under these conditions. How does the PS chipbreaker affect performance? The PS chipbreaker on this insert promotes controlled chip formation and evacuation during turning, which enhances process stability and reduces the likelihood of surface defects. Can this insert be used in standard ISO holders? Yes. The TPMT110308-PS AH8005 conforms to ISO dimensions; the centring hole and plate geometry ensure repeatable seating in matching ISO turning holders. What cutting geometry helps achieve a good surface finish? The 0.8 mm corner radius offers a compromise between edge strength and finish quality; combined with appropriate feeds and speeds, the radius supports improved surface finish while maintaining robustness. Is the insert suitable for interrupted cuts or roughing operations? The triangular geometry and 0.8 mm radius deliver sufficient edge strength for many interrupted and semi‑roughing operations, provided holder rigidity and cutting parameters are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade that balances wear resistance and edge stability, combined with a 0.8 mm corner radius for versatile turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. TPMT110308-PS AH8015 — ISO turning insert, PVD‑coated carbide (Tungaloy) TPMT110308-PS AH8015 is an ISO‑standard triangular turning insert designed for general turning, especially suited to heat‑resistant alloys. ISO‑compliant triangular insert PVD‑coated carbide grade AH8015 Corner radius 0.8 mm for versatility Cylindrical hole with 40°–60° countersink Reliable performance on heat‑resistant alloys The combination of a PVD‑coated carbide substrate and the AH8015 grade offers a balanced mix of wear resistance and cutting edge stability when machining demanding, heat‑resistant materials. This grade is intended as a first choice for general turning of temperature‑resistant alloys, providing consistent tool life under variable cutting conditions. The chipbreaker PS is optimised for stable chip formation, which helps maintain process reliability and reduces interruptions due to chip control issues. Secure clamping and predictable geometry for repeatable results Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness, and this insert is manufactured to ISO tolerances for repeatable mounting. The insert features a cylindrical hole with a 40°–60° countersink, enabling secure fastening and stable seating in a matched holder. With a clearance angle of 11° and a plate thickness of 3.18 mm, the design reduces vibration and supports consistent surface finish, leading to fewer rejects and improved throughput. Versatility through geometry and sensible wear characteristics The triangular plate form with an 11 mm size and a corner radius of 0.8 mm allows a balance between robustness and profile definition; small–radius options give good edge strength while enabling contour accuracy. For shops seeking economical turnover, this insert’s geometry and the AH8015 coating make it suitable for a broad range of turning tasks, from external profiling to light internal work, when the cutting data and holder stability are matched to the component and machine setup. Practical guidance for selection and integration When choosing an insert from this ISO series, select the chipbreaker and grade that correspond to the workpiece material, machining strategy and machine rigidity. The system typically includes the ISO insert, a matching external holder or boring bar, support pad or clamping set and spare fixing screws. Clarify holder compatibility by checking form, size, thickness and fastening method so that the insert sits and clamps correctly for safe, productive machining. Contact Metav Werkzeuge today to discuss how the Tungaloy AH8015 inserts fit specific turning applications, or request tailored cutting data and availability from our specialists. Technical Data Article number: 6947714 SKU: 6947714-Tungaloy Manufacturer SKU: TUN6947714 Manufacturer article number: 6947714 Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Insert size: 11 mm Clearance angle: 11° Plate thickness: 3.18 mm Geometry angle: 60° Special features PVD‑coated carbide (AH8015) Chipbreaker: PS Plate form: triangular Hole style: cylindrical hole + one‑side countersink (40°–60°) Application: turning; suited for heat‑resistant alloys ISO‑standard design; compatibility determined by form, fastening and tolerances FAQ What materials is this insert designed for? The TPMT110308‑PS AH8015 insert from Tungaloy is intended primarily for heat‑resistant alloys, offering a balance of wear resistance and edge stability for general turning operations. How does the chipbreaker affect performance? The PS chipbreaker on the TPMT110308‑PS promotes controlled chip formation for predictable evacuation, which improves process stability and reduces downtime in continuous turning cycles. Which toolholders are compatible with this ISO insert? Compatibility is based on ISO form, size, thickness and fastening; the TPMT110308‑PS should be used with holders and boring bars that accept triangular ISO inserts and match the 11 mm size and 3.18 mm thickness. What are the key geometric specifications to check before mounting? Check the insert’s corner radius (0.8 mm), clearance angle (11°), hole style (cylindrical with 40°–60° countersink) and plate thickness (3.18 mm) to ensure proper seating and clamping in the selected holder. Is this a good option for shops seeking predictable tool life? Yes; the AH8015 PVD‑coated carbide grade and ISO manufacturing tolerances provide repeatable performance and stable cutting behaviour suitable for productive machining. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110308 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability of the PVD-coated grade AH8015 and the ISO-compliant TPMT geometry for consistent turning performance; order stock and technical advice directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. TPMT110308-TM AH8015 — ISO turning insert, PVD-coated carbide, 0.8 mm radius (Tungaloy) TPMT110308-TM AH8015 is an ISO triangular turning insert designed for general machining of heat-resistant alloys, combining a PVD-coated carbide grade with the TM chipbreaker for stable chip control and reliable tool life. PVD-coated carbide grade AH8015 Optimised for heat-resistant alloys ISO triangular insert TPMT110308-TM Cylindrical hole with 40°–60° countersink Consistent cutting performance for demanding turning operations The combination of a PVD-coated surface and a purpose-developed carbide grade delivers a measured balance between wear resistance and cutting-edge stability. The AH8015 grade is specified as a first-choice solution for the general machining of heat-resistant alloys because it sustains elevated temperatures while maintaining edge integrity. With a corner radius of 0.8 mm and an included angle of 60°, the insert supports predictable cut geometry and surface finish. Controlled chip formation is assisted by the TM chipbreaker, which reduces the risk of long, stringy chips and improves process reliability across a range of feeds and depths of cut. Fast integration into ISO tool systems to reduce setup times Dimensions and mount features adhere to ISO conventions, so mechanical compatibility with matched holders is ensured when form, clearance, tolerance class, fastening method, size and thickness are aligned. The insert’s 3.18 mm thickness and 11° clearance angle provide a robust contact face and adequate clearance to prevent rubbing during external and internal turning. The central cylindrical hole with a one-sided countersink (40°–60°) allows positive, repeatable clamping in standard ISO clamping systems, simplifying changeovers and reducing machine downtime. This geometry supports standardisation on the shop floor and helps maintain consistent process parameters across shifts. Optimised economy through stable chip control and predictable tool life Selecting a cutting grade that balances toughness and abrasion resistance reduces the frequency of unexpected edge failures and unscheduled stoppages. The AH8015 composition and the TM chipbreaker encourage stable chip formation, which translates to lower tool inventory turnover and more consistent component quality. For production lines handling heat-resistant alloys, this insert offers an economical compromise: sufficient wear resistance for extended life while retaining edge strength for interrupted or medium-stability cuts. When combined with a correctly matched holder and clamping set, the system supports repeatable results and improved overall process efficiency. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6825798 Manufacturer SKU: TUN6825798 SKU: 6825798-Tungaloy Model series: ISO turning inserts Material: Carbide Facts Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Hole: cylindrical hole + one-sided countersink (40°–60°) Special features ISO designation: TPMT110308-TM Coating / grade: AH8015 (PVD-coated carbide) Chipbreaker: TM Typical application: external and internal turning System components: ISO insert, matching outer holder or boring bar, clamping set and spare screws FAQ What materials is this insert suitable for? TPMT110308-TM AH8015 by Tungaloy is specified as a first-choice grade for the general machining of heat-resistant alloys, providing a balance between wear resistance and edge stability suitable for many demanding alloys. Which dimensions and mounting features matter for selection? Key dimensions are a corner radius of 0.8 mm, insert size 11 mm, thickness 3.18 mm and an 11° clearance angle; the insert fits via a cylindrical hole with a 40°–60° countersink for standard ISO clamping. How is holder compatibility determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures the TPMT110308-TM seats correctly in the chosen ISO holder and clamp set. What does the TM chipbreaker do in practice? The TM chipbreaker promotes controlled chip formation and shorter chip lengths, improving process stability and reducing the risk of chip-related interruptions during turning. Is this insert better for roughing or finishing? AH8015 is designed as a general-purpose grade for heat-resistant alloys; its balanced properties make it suitable for both medium finishing and general turning operations, with final selection dependent on workpiece stability and cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 AH8015 Wendeplatten - Tungaloy
High-performance PVD-coated carbide AH8015 and the TSF chipbreaker provide a balanced combination of wear resistance and edge stability for consistent turning of heat‑resistant alloys; compatibility with common ISO toolholders is ensured by the standardised geometry and mounting hole. Order or request holder compatibility advice via Metav Werkzeuge if assistance is required. TPMT 110308 AH8015 ISO turning insert for turning — Tungaloy TPMT 110308 AH8015 is a triangular ISO turning insert designed for external and internal turning, offering a robust solution for machining heat‑resistant alloys with stable chip control. Triangular insert, 60° included angle PVD-coated carbide grade AH8015 TSF chipbreaker for stable chips 0.8 mm corner radius, 3.18 mm thickness Engineered for dependable machining performance The insert combines a PVD‑coated carbide substrate with the AH8015 grade to offer a practical balance between wear resistance and edge stability, making it well suited to the general machining of heat‑resistant alloys. The TSF chipbreaker promotes consistent chip formation and evacuation, which reduces the risk of built‑up edge and improves surface finish. Because the coating process enhances thermal resistance and reduces friction, the insert maintains cutting performance over longer tool life, supporting steady production cycles in workshop and industrial environments. Geometry and holder compatibility for reliable set‑up Designed to conform to ISO dimensions, the triangular form with a 60° included angle and an 11° relief angle ensures compatibility with standard toolholders; correct matching depends on the insert shape, relief angle, tolerance class, fastening method, size and thickness. The central mounting feature is a cylindrical hole with a single countersink (40°–60°) which secures the component in a wide range of clamping systems without complex adjustments. The 0.8 mm corner radius and 3.18 mm thickness contribute to predictable cutting forces and permit stable engagement for both external and internal turning tasks. Operational benefits and material application The design emphasises practical versatility: the combination of substrate and coating in this grade makes it a first choice for machining heat‑resistant alloys where a compromise between abrasion resistance and edge robustness is required. The insert’s ISO format simplifies inventory and tool management across production lines, while the TSF chipbreaker supports continuous operations by promoting short, controllable chips that are easier to clear from the cutting zone. Where process reliability and repeatable results are priorities, this insert supports efficient workflows and consistent surface quality. For precise toolholder matching and availability of the Tungaloy TPMT110308 AH8015, contact Metav Werkzeuge for technical advice and procurement; Metav Werkzeuge’s specialists can recommend the appropriate holder geometry and cutting parameters to suit the application (e‑mail: info@metav-werkzeuge.com, tel: +49 2822 7131930). Technical Data Article number: 6825774 Manufacturer SKU: TUN6825774 SKU: 6825774-Tungaloy Model series: ISO turning inserts Designation: TPMT110308-TSF Label: TPMT110308-TSF AH8015 Core data Corner radius: 0.8 mm Thickness: 3.18 mm Inscribed circle / size: 11 mm Included angle: 60° Relief angle: 11° Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: TSF Hole style: cylindrical hole + single countersink (40°–60°) Plate shape: triangular Application: turning FAQ What workpiece materials is this insert suitable for? The Tungaloy TPMT110308 AH8015 is specified for the general machining of heat‑resistant alloys, offering a compromise between wear resistance and edge stability appropriate for such materials. How does the TSF chipbreaker affect machining? The TSF chipbreaker on this insert promotes predictable, short chip formation and reliable evacuation, which helps maintain surface quality and reduces the likelihood of chip entanglement. Which geometry features ensure compatibility with standard toolholders? Standard ISO geometry—triangular form, 60° included angle and the central mounting hole with a 40°–60° countersink—ensures the insert fits common holders when the holder matches the insert’s form, relief angle and thickness. Is the TPMT110308-TSF AH8015 suitable for internal turning? Yes, the insert is designed for both external and internal turning operations when used with an appropriate holder and correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 AT9530 PS Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) and a 0.8 mm corner radius for consistent surface quality and predictable tool life; the ISO conformity ensures straightforward integration into standard turning toolholders. Order directly via Metav Werkzeuge or consult the team for application matching. TPMT 110308 AT9530 ISO triangular insert for turning — Tungaloy TPMT110308-PS AT9530 is an ISO triangular turning insert designed for finishing and light turning operations, optimised for steel machining with a focus on surface quality and uniform wear Coated cermet AT9530 for fine finish ISO triangular shape, 11 mm size 0.8 mm corner radius for accurate profiles Cylindrical hole with 40°–60° countersink Consistent finishing and reduced rework The coated cermet grade AT9530 is engineered specifically for finishing and light machining of steel, delivering a noticeably improved surface finish while promoting even tool wear. A cermet is a composite of ceramic particles bonded in a metallic matrix; this combination provides higher hardness and thermal stability than conventional carbides, which helps maintain form at the cutting edge during low to moderate cutting speeds. The result is fewer part reworks and more predictable batch quality, making the insert especially suitable where surface integrity is a priority. Secure fit and predictable repeatability Conformity with ISO geometry means the insert integrates cleanly into standard external holders and boring bars: the triangular form, 11 mm size and 3.18 mm thickness match established toolholder seats. The 11° clearance and the 60° included angle deliver stable cutting geometry, while the cylindrical hole with single-sided countersink (40°–60°) ensures reliable clamping and repeatable positioning. These attributes reduce setup variation and enable consistent part tolerances across shifts, which is vital for production-focused workshops and subcontract turning operations. Process reliability and economical machining The PS chipbreaker is tuned for light cuts and finishing feeds, managing chips effectively without forcing heavy cutting parameters. Controlled chip formation lowers cutting forces and vibration, supporting longer insert life and fewer interruptions for tool changes. For manufacturers prioritising throughput and surface standards, this insert offers an economical balance: high-quality results per insert, simplified tool inventory through ISO compatibility, and reduced downstream inspection and rework effort. Ideal users include job shops and OEM lines seeking reliable finishing performance. Choose Tungaloy quality — contact Metav Werkzeuge for ordering and technical matching: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: 6773750 SKU: 6773750-Tungaloy Manufacturer SKU: TUN6773750 Model series: ISO-Drehwendeschneidplatten Designation: TPMT110308-PS Label: TPMT110308-PS AT9530 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° ISO code: 110308 Special features Coated cermet grade AT9530 Chipbreaker PS Material: carbide Triangular insert Cylindrical hole with single-sided countersink (40°–60°) For finishing and light turning of steel FAQ What materials is this insert best suited for? The TPMT110308-PS AT9530 is optimised for finishing and light machining of steel; the coated cermet composition emphasises surface quality and uniform wear when machining steel. How does the PS chipbreaker affect machining? The PS chipbreaker on the insert promotes controlled chip formation during finishing cuts, reducing cutting forces and vibration for more consistent surface results with Tungaloy turning inserts. Which toolholders are compatible with this geometry? As an ISO triangular insert with code 110308, the insert fits holders designed for TPMT-style seats with an 11 mm inscribed circle and 3.18 mm thickness, ensuring repeatable clamping and positioning. What benefits does the 0.8 mm corner radius provide? The 0.8 mm radius balances profile accuracy and edge strength, improving surface finish while maintaining sufficient edge robustness for light finishing passes with the TPMT110308-PS AT9530. Is the insert suitable for automated production environments? Yes; the ISO conformity, consistent clamping via the countersunk hole and the cermet coating make the insert a reliable choice for automated turning centres where surface quality and predictable tool life are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 GH730 PS Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance and the PS chipbreaker for stable, productive turning operations; the insert’s 60° triangular form and centre-hole fixing ensure reliable clamping and repeatability. Order the TPMT110308-PS GH730 directly via Metav Werkzeuge or ask our consultants if needed. TPMT 110308 GH730 — ISO turning insert for general turning (Tungaloy) TPMT 110308-PS GH730 is an ISO‑standard triangular indexable insert designed for a wide range of turning tasks, offering a balanced combination of wear resistance, toughness and edge stability. ISO triangular insert, 60° form GH730 cemented carbide grade PS chipbreaker for stable cutting 0.8 mm corner radius, with centre hole Reliable productivity through grade and geometry The TPMT110308-PS GH730 indexable insert combines an ISO‑standard triangular geometry with the GH730 cemented carbide grade and a PS chipbreaker to deliver consistent metal removal rates in routine turning. The design concentrates on repeatable performance: the 60° point angle and centre hole with a single‑side countersink provide positive mechanical clamping and precise seating in compatible holders. For production environments where predictable tool life and minimal set‑up time matter, this insert reduces downtime and supports steady cycle times. Durability and cutting-edge stability for tougher cycles The GH730 grade is selected to balance wear resistance and toughness, extending edge life without compromising reliability under varied cutting conditions. This results in fewer indexings and lower tool consumption over batches, improving cost‑efficiency. The PS chipbreaker is engineered to control chip formation for standard turning operations, promoting stable chip flow and reduced vibration. Together these features maintain surface quality and help meet dimensional tolerances more consistently. Compatibility and handling made clear Compatibility with a clamping system depends on the insert’s form, 11° relief, tolerance class, fixing method, size and 3.18 mm thickness. The TPMT shape code (ISO 110308) and the centre hole with cylindrical bore plus one‑sided countersink (40°–60°) are decisive for correct mounting. The 0.8 mm corner radius affects both strength of the cutting edge and achievable radii on finished parts; select the radius based on the required surface finish and cutting loads. When matching to a holder, confirm that the seat geometry and screw system correspond to the ISO specification to ensure secure fixation. Practical use and workshop advantages Designed for both external and internal turning, this insert is intended to be indexed or replaced rather than reconditioned; rapid replacement minimises machine downtime. The standardised ISO format simplifies inventory management and cross‑reference with compatible holders. Stored correctly and used with the appropriate cutting parameters, the insert consistently delivers good edge stability and predictable wear behaviour. The combination of an ISO form, cemented carbide composition and a controlled chipbreaker supports everyday workshop productivity while maintaining surface integrity. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy TPMT110308-PS GH730 into the current tool set‑up and for availability and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6821021 Manufacturer SKU: TUN6821021 Label / full designation: TPMT110308-PS GH730 Model series: ISO turning indexable inserts Material: cemented carbide Application: Turning Core dimensions Form angle: 60° Size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° ISO code: 110308 Manufacturer article number: 6821021 SKU: 6821021-Tungaloy Materials and special features Grade: GH730 Chipbreaker: PS Centre hole: cylindrical with single‑side countersink (40°–60°) Plate shape: triangular (TPMT) Intended system: ISO insert plus matching external holder or boring bar, clamping pad and screw Intended use: external and internal turning operations FAQ What applications is this insert intended for? The TPMT110308-PS GH730 is designed for general turning applications, suitable for external and internal turning where an ISO triangular insert with PS chip control is appropriate. How is compatibility with a holder determined? Compatibility depends on the insert form, the 11° relief, tolerance class, fixing method, size and thickness; ensure the holder matches the ISO 110308 seat and the centre‑hole countersink arrangement. What advantages does the GH730 grade provide? The GH730 grade balances wear resistance, toughness and edge stability to extend tool life while maintaining cutting performance across typical turning conditions. What does the PS chipbreaker do in practice? The PS chipbreaker promotes controlled chip formation for stable evacuation during turning, reducing vibration and improving surface finish in many routine operations. Is the insert regrindable? These indexable inserts are designed for indexing or replacement; when the cutting edges are worn, replacement is the standard practice to restore full performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a GH730 carbide grade and a PM chipbreaker for dependable performance and predictable tool life; order or request advice from Metav Werkzeuge for fast selection and delivery. TPMT 110308 GH730 ISO turning insert TPMT110308-PM by Tungaloy — PM chipbreaker, 11° clearance A TPMT110308-PM GH730 triangular ISO insert engineered for external and internal turning, combining a versatile PM chipbreaker with a wear‑resistant carbide grade for consistent cutting performance. Triangular ISO geometry, 11 mm size PM chipbreaker for general turning GH730 grade for wear resistance 0.8 mm corner radius and 3.18 mm thickness Consistent fit and secure clamping for faster setup The insert is built to ISO standards so compatibility with holders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The combination of the triangular geometry and the cylindrical hole with one‑side countersink (40°–60°) ensures reproducible seating and reliable clamping in standard external holders or boring bars. This predictable interfacing reduces setup variation and supports steady cycle times on shopfloor turning operations without the need for bespoke fixtures. Improved cutting performance and extended tool life The Tungaloy GH730 grade balances wear resistance, toughness and cutting‑edge stability to maintain performance under varying conditions. Paired with the PM chipbreaker, the configuration promotes controllable chip formation and efficient evacuation for a wide range of turning tasks. The result is a reduction in unscheduled tool changes and more consistent surface quality, translating into higher productivity and lower production interruptions in batch and single‑piece workflows. Practical integration and selection guidance for turning systems A standard system comprises the ISO insert, a suitable external holder or boring bar, plus a shim/clamping set and spare screws. The 0.8 mm corner radius delivers a compromise between edge strength and surface finish, while the 3.18 mm thickness contributes to rigidity under load. When specifying cutting data and holder geometry, select the chipbreaker and grade to match workpiece material, machining stability and the intended operation (roughing or finishing). The insert’s ISO‑compliant design makes it straightforward to replace or upgrade within existing tool systems without redesigning toolblocks or holders. For tailored technical advice or a quotation on Tungaloy TPMT110308-PM GH730 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821020 Manufacturer SKU: TUN6821020 Label: TPMT110308-PM GH730 Category: Indexable turning inserts Facts Inscribed circle / size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide Grade: GH730 Chipbreaker: PM Hole style: cylindrical hole + one‑side countersink (40°–60°) Geometry: triangular ISO TPMT Intended use: external and internal turning System components: insert, holder/boring bar, shim/clamping set, spare screws FAQ What determines whether this insert fits a specific holder? Compatibility is defined by form, clearance angle, tolerance class, fastening, size and thickness; the TPMT110308-PM GH730 is ISO‑compliant so matching these parameters ensures correct fit. What advantages does the GH730 grade offer? The GH730 grade used in TPMT110308-PM GH730 provides a balance of wear resistance, toughness and cutting‑edge stability to sustain performance across mixed turning applications. For which turning operations is this insert intended? This insert is intended for external and internal turning; the PM chipbreaker supports general turning tasks with controlled chip formation. What is the role of the PM chipbreaker? The PM chipbreaker on TPMT110308-PM GH730 assists in predictable chip control and evacuation, improving surface quality and reducing the likelihood of chip-related interruptions. Can these inserts be used with boring bars? Yes; the system setup described for TPMT110308-PM GH730 includes use with a matching external holder or boring bar, together with the appropriate shim/clamping set and replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110308 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, coated cermet grade and a compact 60° triangular geometry for consistent finishing and extended tool life; order directly via Metav Werkzeuge or contact our consultants for application advice. TPMT 110308 GT9530 ISO turning insert by Tungaloy — coated cermet, PS chipbreaker, 60° A TPMT 110308 GT9530 ISO turning insert designed for finishing and light universal turning of steel in stable machining conditions. Coated cermet grade GT9530 PS chipbreaker for finishing Corner radius 0.8 mm for fine surfaces Triangular 60° geometry, ISO standard Superior surface quality and extended tool life The GT9530 grade is a coated cermet developed for wear resistance during finishing cuts, which helps deliver a consistently improved surface finish and reduced tool wear under stable machining conditions. The combination of a polished chipbreaker and a hard cermet substrate reduces built‑up edge and maintains a sharp cutting edge for longer, resulting in fewer interruptions for insert changes and more predictable part quality. Precise geometry for straightforward integration This insert follows the ISO plate system and its fit is determined by form, clearance, tolerance class, fastening, size and thickness. The triangular shape with a 60° included angle, corner radius 0.8 mm and 3.18 mm thickness provides defined cutting engagement and predictable chip flow. A cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping in compatible holders and straightforward replacement in standard ISO turning toolholders. Fit for turning steel with process stability Specified for turning operations on steel, the TPMT110308‑PS GT9530 combines a refined chipbreaker and a coated cermet body to balance wear resistance and surface integrity. The PS chipbreaker supports finishing cuts by controlling chip formation at low to moderate depths of cut; in a rigid setup this leads to consistent part tolerances and less downstream finishing. For applications requiring reliable repeatability and a premium finish, this insert aids process stability and reduces rework. For application-specific selection of the Tungaloy coated cermet TPMT110308‑PS GT9530 and delivery options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and swift procurement Technical Data Article number: 6998373 Manufacturer SKU: TUN6998373 SKU: 6998373-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TPMT110308-PS GT9530 Core data Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Thickness: 3.18 mm Insert size: 11 mm Design & features Grade: GT9530 (coated cermet) Chipbreaker: PS Shape: triangular (TPMT) Mounting: with hole — cylindrical hole + one‑side countersink (40°–60°) Application: external and internal turning Compatibility: ISO standard fit for matching holders FAQ What materials is this insert suitable for? The TPMT110308‑PS GT9530 is specified for machining steel; the coated cermet grade is tuned to provide good surface finish and longer life on steel in stable turning conditions. What does the PS chipbreaker do? The PS chipbreaker on this insert controls chip formation during finishing cuts, promoting short, manageable chips and a consistent surface when using the TPMT110308‑PS GT9530 in turning operations. How is the insert fixed to the holder? The insert is designed with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping in compatible ISO turning holders; compatibility depends on form, clearance, tolerance, fastening, size and thickness. Which geometry should be chosen for fine finishing? A corner radius of 0.8 mm combined with the 60° triangular geometry and the GT9530 grade is suitable for fine finishing, offering a good compromise between edge strength and surface integrity. Is this an original Tungaloy item and where is it referenced? This is an original Tungaloy coated cermet insert (TPMT110308‑PS GT9530) listed under article number 6998373 and manufacturer SKU TUN6998373 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 NS9530 PS Wendeplatten - Tungaloy
Combining the NS9530 cermet grade with a sharp cutting edge and a 0.8 mm corner radius, this insert delivers high surface finish and low cutting forces for finishing operations. Order the TPMT 110308-PS NS9530 directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. TPMT 110308 NS9530 — ISO triangular turning insert with PS chipbreaker (Tungaloy) The TPMT 110308 NS9530 is an ISO-standard triangular insert for turning, optimised for finishing steel with a sharp cutting edge, small depths of cut and continuous machining. ISO-standard triangular insert, 11° relief Uncoated cermet for finishing 0.8 mm corner radius for fine profiles Cylindrical hole with countersink for secure clamp Fine finishing and reduced rework The NS9530 grade is an uncoated cermet designed specifically as a finishing grade for steel, offering a sharp cutting edge that reduces ploughing and lowers cutting forces. This results in a consistent surface quality on external and internal profiles and minimises the need for subsequent manual finishing. For applications with small depths of cut and continuous cutting, the geometry and microstructure of the grade help secure predictable dimension tolerance and repeatable surface results, making it suitable where part appearance and dimensional accuracy are priorities. Secure clamping and easy indexing ISO compliance and the insert’s geometry simplify toolholder selection: compatibility is determined by shape, relief angle, tolerance class, clamping method, size and thickness. The triangular form provides three indexing edges, enabling quick rotation and maximising usable edges per insert. The cylindrical hole with a single-sided countersink (40°–60°) ensures reliable location and seating in the pocket, while the 3.18 mm thickness contributes to stable clamping and vibration resistance during finishing passes. Productivity through predictable performance A 0.8 mm corner radius and the PS chipbreaker combine to deliver stable chip control in light finishing cuts without aggressive cutting forces. The 11° relief angle reduces rubbing on the flank and helps maintain cutting-edge sharpness, supporting longer intervals between indexings on continuous operations. As a result, cycle times remain consistent and scrap due to surface defects is reduced. For manufacturers seeking high first-pass quality and lower rework rates, these inserts contribute directly to process efficiency and predictable production output. For precision finishing with a proven Tungaloy grade, contact Metav Werkzeuge to request the TPMT 110308-PS NS9530 insert and receive tailored application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998548 SKU: 6998548-Tungaloy Manufacturer SKU: TUN6998548 Label: TPMT110308-PS NS9530 Facts Corner radius: 0.8 mm Relief angle: 11° Insert angle: 60° Thickness: 3.18 mm Size: 11 Shape: triangular Special features Material: carbide Grade/coating: NS9530 (uncoated cermet) Chipbreaker: PS Hole: cylindrical hole with single-sided countersink (40°–60°) Typical application: turning (finishing steel) System: ISO turning insert family FAQ What materials is this insert intended for? The TPMT 110308-PS NS9530 is formulated as a finishing grade for steel and is recommended where a sharp edge and high surface quality are required. How many usable edges does the insert offer? The triangular form provides three cutting edges per insert; the ISO geometry and the cylindrical hole with countersink support secure seating and reliable indexing. Is the insert coated and how does that affect use? This insert uses an uncoated cermet grade (NS9530), which promotes a sharp edge and excellent surface finish in finishing applications over coatings that are typically chosen for roughing or higher thermal loads. Which feature most influences surface finish in continuous cuts? A combination of the NS9530 cermet grade, the 0.8 mm corner radius and the PS chipbreaker stabilises chip formation and reduces cutting forces, directly improving surface quality on continuous finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 NS9530 TM Wendeplatten - Tungaloy
Take advantage of a high‑quality, uncoated cermet finishing grade and precise ISO geometry to improve surface finish and reduce cutting forces in turning operations; order directly via Metav Werkzeuge or contact our consultants for tailored holder compatibility and fast supply. TPMT110308 110308 NS9530 — ISO turning insert (finishing), Tungaloy TPMT110308-TM NS9530 is an ISO‑standard turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts. Uncoated cermet grade NS9530 Optimised for finishing steel Sharp cutting edge for low cutting forces ISO triangular insert, 60° geometry Improved surface quality with a finishing cermet The uncoated cermet NS9530 is specified for finishing steel where surface integrity and low cutting forces matter. As a finishing grade, this insert produces a finer surface with reduced burr formation during continuous cuts and small depths of cut. The combination of a sharp cutting edge and cermet chemistry reduces rubbing and smearing, so the operator benefits from consistently better part finish and lower rework rates. This characteristic makes the insert particularly suitable for jobs where achieving tight surface‑finish tolerances is critical. Reliable fit and predictable clamping parameters Compatibility with holders is governed by form, clearance angle, tolerance class, clamping and plate dimensions; the insert’s ISO designation ensures straightforward selection of matching tooling components. The triangular shape with a 60° included angle and 11° clearance provides stable geometry for external and internal turning, while the 0.8 mm corner radius helps maintain edge strength without compromising finish. The insert has a 3.18 mm thickness and is supplied with a cylindrical hole plus a single‑side countersink (40°–60°) for secure location and repeatable clamping in standard ISO seats. Productivity through low cutting forces and consistent chip behaviour Because this is a finishing grade with a sharp edge, cutting forces are lower, reducing chatter risk and enabling higher feed stability on less rigid set‑ups. The TM chipbreaker is matched to finishing applications and helps produce manageable chips in continuous cuts, contributing to process reliability and reduced cycle variability. The insert’s substrate and geometry deliver predictable tool life in orderly finishing tasks, supporting lean production where reproducible component quality and minimal downtime are priorities. For holder selection and process parameters, consider the machining stability, intended depth of cut and feed to exploit the grade’s advantages. For precision finishing on steels with the Tungaloy NS9530 grade, contact Metav Werkzeuge for expert advice on holder compatibility and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6945284 SKU: 6945284-Tungaloy Manufacturer SKU: TUN6945284 Model series: ISO-Drehwendeschneidplatten Part designation: TPMT110308-TM NS9530 Facts Geometry angle: 60° Clearance angle: 11° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 11 Special features Uncoated cermet grade NS9530 Chipbreaker: TM Plate form: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Substrate / material: carbide / hardmetal Optimised for finishing steel and continuous cuts Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is the insert suited for? The TPMT110308‑TM NS9530 insert is optimised for machining steel and is a finishing grade designed to deliver high surface finish and low cutting forces on continuous cuts. Which holder features are required for correct fitment? Correct fitment depends on matching the ISO seat form, the 11° clearance, tolerance class, the plate 3.18 mm thickness and the clamping system; use holders that accept triangular ISO inserts with a cylindrical hole plus countersink. How does the NS9530 grade affect cutting parameters? As an uncoated cermet finishing grade, NS9530 favours lower feeds and shallow depths of cut for superior surface finish; feeds and DOC should be set to maintain continuous cutting and controlled chip formation with the TM chipbreaker. Is this insert suitable for internal as well as external turning? Yes, the ISO triangular geometry and sharp cutting edge make the insert suitable for both external and internal turning where finishing performance is required. What distinguishes this part from general‑purpose grades? The TPMT110308‑TM NS9530 is a dedicated finishing insert: the cermet composition and sharp edge prioritise surface quality and reduced cutting forces over heavy material removal, unlike general‑purpose inserts designed for higher stock removal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 NS9530 TSF Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, the uncoated cermet NS9530 grade and precise corner radius to achieve consistent finishing results; order directly via Metav Werkzeuge or consult the specialists for application guidance. TPMT 110308 NS9530 — Turning insert (Tungaloy) TPMT 110308 NS9530 is a triangular ISO turning insert engineered for finishing steel components with a sharp cutting edge and low cutting forces ISO-standard triangular insert for finishing Uncoated cermet grade NS9530 for fine finishes Sharp cutting edge for low cutting forces Cylindrical hole with 40°–60° countersink Achieve high-quality finishes with cermet precision The triangular ISO insert is designed for finishing and produces a consistently fine surface finish thanks to the uncoated cermet NS9530 cutting material. Cermet combines ceramic and metallic phases to provide a sharp edge and thermal stability, which reduces built-up edge during continuous turning operations. The result is lower cutting forces and improved dimensional control on turned parts, particularly in steel applications where a smooth final surface is required. Emphasis on stable geometry and a defined corner radius supports repeatable results and reduces the need for secondary finishing operations. Clear compatibility and simple system integration Compatibility with toolholders is governed by the insert form, 11° relief, tolerance class, fastening method, nominal size and thickness. The ISO designation and triangular form ensure straightforward integration into standard holders and boring bars that accept TPMT-style inserts. The insert’s cylindrical hole with a one-sided countersink (40°–60°) allows secure clamping and consistent seat location, improving repeatability across index changes. This system-oriented approach simplifies tooling logistics and reduces setup time on the shop floor. Process advantages and application guidance Using an uncoated cermet grade NS9530 in finishing provides a balance of sharpness and wear resistance: sharp cutting edges lower cutting forces while the material’s wear characteristics maintain edge integrity during longer continuous cuts. For small depths of cut and light feed finishing passes, this geometry and grade help achieve tight tolerances and high surface quality. Where stability and consistent chip formation are priorities, the TSF chipbreaker supports controlled chip flow, aiding surface integrity and reducing the risk of re-cutting. Practical notes for handling and set-up The insert’s 0.8 mm corner radius and 3.18 mm plate thickness contribute to stiffness at the cutting edge, allowing fine but stable finishing passes. When mounting, ensure the matching holder accepts the TPMT form and that clamping screws and underlay plates correspond to the ISO tolerance class to secure contact and minimise vibration. For materials selection: the grade is optimised for steel finishing; cutting parameters should be adapted for continuous cuts and small depths of cut to fully exploit the low cutting force characteristic of the grade. For further technical details or specific cutting data, consultation with Metav Werkzeuge’s specialists is available. Contact Metav Werkzeuge for tailored application advice and to request a delivery quote for the Tungaloy TPMT 110308 NS9530 turning insert Technical Data Manufacturer article number: 6945280 SKU: 6945280-Tungaloy Manufacturer SKU: TUN6945280 Model series: ISO turning indexable inserts Plate designation: TPMT110308-TSF Data Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 11 Special features Material: carbide Cutting material: uncoated cermet NS9530 Chipbreaker: TSF Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular Application: turning Typical use: external and internal finishing; continuous cuts and small depths of cut FAQ What materials is this insert best suited for? This insert, specified as an uncoated cermet NS9530 grade, is optimised for finishing operations in steel; NS9530 emphasises a sharp edge and low cutting forces suitable for continuous turning. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes controlled chip formation and evacuation, which supports consistent surface quality and reduces the likelihood of chip interference during finishing cuts with the TPMT 110308 geometry. What are the key mounting considerations for this insert? Ensure the toolholder matches the TPMT form, the 11° relief and the plate thickness of 3.18 mm; correct seating and clamping, using compatible underlay plates and screws, are necessary for repeatable accuracy. Can this insert be used for internal turning? Yes, the geometry and low cutting-force characteristics make the insert suitable for both external and internal turning where finishing and surface quality are required. How does the 0.8 mm corner radius influence results? The 0.8 mm corner radius balances edge strength and surface finish: it provides stiffness for stable cuts while still enabling fine finishing passes to achieve the desired surface texture. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T5115 CM Wendeplatten - Tungaloy
Combining the CVD-coated T5115 grade with a 0.8 mm corner radius and a 60° triangular geometry delivers a balanced mix of wear resistance and cutting-edge stability for efficient cast iron turning; order directly via Metav Werkzeuge or consult our specialists for application matching and availability. TPMT 110308 T5115 ISO turning insert, triangular 60° by Tungaloy A TPMT 110308 T5115 triangular ISO turning insert engineered for external and internal turning, optimised for cast iron machining. CVD-coated carbide T5115 Optimised for cast iron turning 60° triangular geometry 0.8 mm corner radius 11° clearance angle Higher productivity through a balanced cutting grade The CVD-coated T5115 grade is designed to offer a reliable compromise between wear resistance and cutting-edge stability, making it well suited to repetitive turning operations in cast iron. A CVD coating forms a hard, wear-resistant layer that reduces flank wear and helps maintain consistent component dimensions over longer tool life. For production environments this translates into fewer tool changes and a steadier process window, which supports higher throughput and predictable cycle times. Secure clamping and geometry that aids surface quality The 60° triangular geometry combined with a 0.8 mm corner radius provides a robust cutting edge that tolerates interrupted cuts while still enabling good surface finish on turned parts. The insert’s 11 mm size and 3.18 mm thickness contribute to rigidity in the toolholder, and the cylindrical hole with single-sided countersink (40°–60°) ensures precise location and secure clamping. Compatibility with holders depends on form, relief angle, tolerance class, fixing method, size and thickness; verify these parameters against the chosen toolholder to achieve repeatable clamping and consistent component quality. Application guidance and selection advice for reliable results Typical operations include both external and internal turning; the supplied chipbreaker CM is intended to manage chips in many cast iron applications but should be matched to workpiece grade, machining strategy and machine stability. When machining cast iron, a stable setup and conservative feed/speed starting point extend the effective life of the insert. The ISO-standard format allows straightforward replacement and inventory management. For process optimisation, consider the balance between corner radius and feed rate: a larger radius improves edge strength but requires higher feeds to avoid increased cutting forces. For bespoke recommendations, Metav Werkzeuge can assist with parameter selection and stock queries. Contact Metav Werkzeuge for tailored application advice, availability and to discuss how the Tungaloy TPMT 110308 T5115 insert fits specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer item number: 6864788 SKU: 6864788-Tungaloy Manufacturer SKU: TUN6864788 Label: TPMT110308-CM T5115 Core data Geometry: 60° Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Hole: with hole; cylindrical + single-sided countersink (40°–60°) Materials & features Substrate: carbide Coating / grade: T5115 (CVD-coated) Chipbreaker: CM Application: turning (external and internal) Series: ISO turning inserts FAQ What materials is this insert best suited for? The TPMT110308-CM T5115 insert uses a CVD-coated carbide grade optimised for cast iron applications, offering balanced wear resistance and edge stability for typical grey and nodular cast iron turning. How does the 0.8 mm corner radius affect the machining result? A 0.8 mm corner radius increases edge strength and resistance to chipping during interrupted cuts; with the TPMT 110308 T5115 this radius supports robust performance while maintaining an acceptable surface finish when paired with appropriate feeds. Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO format and the insert’s geometry make it suitable for both external and internal turning operations when used with a compatible holder and correct mounting. What does the CM chipbreaker offer in practice? The CM chipbreaker is designed to control chip formation in many cast iron turning tasks, promoting consistent chips that evacuate well and reduce risk of entanglement at moderate cutting parameters. How should compatibility with a toolholder be checked? Verify the holder’s pocket form, relief/facing angle, tolerance class, fixing method, insert size and thickness against the ISO insert specifications; these parameters determine correct seat and secure clamping for the TPMT110308-CM T5115. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T6215 PS Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade and precise ISO geometry for dependable machining of stainless steels, combined with a 0.8 mm nose radius and secure clamping via the central hole; order the inserts directly via Metav Werkzeuge or consult our technical advisers for the optimal chipbreaker and holder combination. TPMT110308 T6215 – ISO turning insert, triangular, for turning (Tungaloy) The TPMT110308-PS T6215 is an ISO-indexed triangular turning insert designed for external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 For turning stainless steels Triangular ISO insert, 11° clearance angle 0.8 mm nose radius, 3.18 mm thickness Durable cutting grade for consistent stainless-steel performance The CVD-coated T6215 carbide grade provides enhanced wear resistance and thermal stability during prolonged cutting of stainless steel, making it suitable where consistent component quality and longer tool life are required. In typical production runs the combination of coating and carbide substrate reduces flank wear and maintains a stable cutting edge under steady cutting conditions, which translates into fewer interruptions for tool changes and a more predictable machining cycle. Geometry engineered for compatibility and repeatable clamping The insert’s triangular form and ISO geometry ensure straightforward integration with standard external holders and boring bars; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. The insert has an 11° clearance (relief) angle, a 0.8 mm nose radius and a plate thickness of 3.18 mm, plus a central cylindrical hole with a one-sided countersink (40°–60°) for secure fixing. These dimensions support accurate positioning and repeatable cutting performance across serial production. Practical productivity benefits and chip control Equipped with the PS chipbreaker, the insert promotes controlled chip formation when paired with appropriate feeds and speeds, reducing the risk of entanglement and improving surface finish. The indexable design allows multiple cutting edges per insert, lowering tooling costs per part. Use in a complete system — insert, compatible holder or bar, underlay/clamping set and replacement screw — supports faster tool changes and reduced downtime, contributing to a measurable improvement in process efficiency. Application guidance and selection advice Designed for turning operations, the insert performs in both external and internal turning tasks; select chipbreaker and grade according to workpiece material, rigidity of the setup and the type of cut (finishing vs. roughing). For slightly interrupted cuts or less rigid set-ups consider adjusting feed rates and selecting a holder that provides additional support. For tailored recommendations on holder compatibility and cutting data, Metav Werkzeuge’s technical advisers can help specify the correct combination for the intended application. For personalised selection of Tungaloy turning inserts such as the TPMT110308-PS T6215 and to ensure the correct holder and chipbreaker are chosen for maximum process reliability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6903140 Manufacturer SKU: TUN6903140 Label: TPMT110308-PS T6215 SKU: 6903140-Tungaloy Brand: Tungaloy Facts Nose radius: 0.8 mm Clearance angle: 11° Insert size: 11 mm Plate thickness: 3.18 mm Included angle: 60° Countersink: 40°–60° Special features CVD-coated carbide grade T6215 Chipbreaker: PS Triangular ISO insert, with central hole and single-sided countersink Designed for external and internal turning Compatibility via form, relief angle, tolerance class, clamping, size and thickness System components: ISO insert, compatible external holder or boring bar, underlay/clamping set, replacement screws Recommended for machining stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert best suited for? The TPMT110308-PS T6215 is optimised for stainless steel machining; the CVD-coated carbide grade T6215 provides wear resistance and thermal stability during turning operations. What are the key dimensions and geometry of the insert? This triangular ISO insert features a 0.8 mm nose radius, 3.18 mm thickness, 11° clearance angle and an included angle of 60°; it is supplied with a central cylindrical hole and a one-sided countersink (40°–60°). How does compatibility with holders and bars work? Compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness; the TPMT110308-PS requires a matching ISO triangular holder or boring bar for secure clamping. Which chipbreaker should be used for typical turning tasks? The PS chipbreaker fitted to this insert supports controlled chip formation in stable to slightly interrupted conditions; selecting the correct feed, speed and holder improves chip control and surface finish. Is the insert indexable and how many edges are available? The TPMT110308-PS T6215 is an indexable insert with multiple usable cutting edges provided by its triangular design and secure central clamping, allowing economical edge indexing during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 for extended wear resistance, the TSF chipbreaker for controlled chip formation, and the ISO‑compliant triangular geometry for reliable holder compatibility; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPMT 110308 T6215 — ISO triangular turning insert for turning, Tungaloy The TPMT 110308 T6215 is an ISO triangular indexable insert designed for productive external and internal turning, optimised for stainless steel under stable to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 60° triangular ISO insert for turning Optimised for stainless steel turning Cylindrical hole with 40°–60° countersink Consistent surface finish through defined geometry The 60° ISO triangular insert geometry and the corner radius 0.8 mm provide a predictable contact area that supports consistent surface quality during finishing and semi‑finish operations. The modest corner radius reduces vibration sensitivity compared with larger radii while still allowing for light corner reinforcement. Combined with the 11° relief angle, this geometry minimises rubbing and heat build‑up at the flank, which in turn helps to maintain dimensional stability over longer tool life. The result is repeatable part accuracy and fewer in‑process corrections. Durable performance in stainless steel machining The CVD‑coated carbide composition of grade T6215 delivers elevated resistance to built‑up edge and flank wear when machining stainless steel, especially under stable cut conditions. The coating promotes thermal and chemical stability at the cutting edge, helping to avoid premature wear that commonly occurs when machining austenitic stainless grades. Paired with the TSF chipbreaker, the insert supports controlled chip formation for safer chip evacuation and reduced workpiece surface damage, which contributes to higher productivity and fewer part rejections. System compatibility and secure mounting Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; this insert’s ISO designation 110308, 3.18 mm thickness, and the cylindrical hole with single‑side countersink (40°–60°) are specified to fit standard ISO external holders and boring bars. The central hole and countersink arrangement ensure reliable clamping and consistent seat location, which is essential for maintaining repeatable positioning and tool run‑out control in production setups. Correct selection of the matching insert seat and clamp set simplifies changeovers and reduces setup time. Practical selection and operating guidance For turning tasks choose the TSF chipbreaker and the T6215 grade when a balance of wear resistance and chip control is required for stainless steel. For heavier interruptions or unstable setups consider a more robust clamping strategy or a different chipbreaker variant to favour impact resistance. The insert forms part of a typical system build: ISO insert, corresponding external holder or boring bar, shim/clamp set and replacement fastening screws. When in doubt, assess holder fit and insert seating to ensure conformity with ISO tolerances and secure performance. For precise advice on integrating the Tungaloy TPMT 110308 T6215 insert into existing tool systems, or to order matching holders and consumables, contact Metav Werkzeuge for application consultancy and prompt delivery. Technical Data Article number: 6945278 Manufacturer SKU: TUN6945278 SKU: 6945278-Tungaloy Label: TPMT110308-TSF T6215 Manufacturer: Tungaloy Facts Shape: triangular ISO designation: 110308 Corner radius: 0.8 mm Relief angle: 11° Included hole: cylindrical hole with single‑side countersink 40°–60° Thickness: 3.18 mm Angle: 60° Special features CVD-coated carbide grade T6215 Chipbreaker: TSF Application: external and internal turning Compatible with ISO external holders and boring bars Typical system components: insert, holder, shim/clamp set, replacement screws FAQ What materials is this insert designed for? The TPMT 110308 T6215 insert is formulated primarily for stainless steel machining under stable to lightly interrupted conditions, using the CVD‑coated T6215 grade and TSF chipbreaker for controlled chip formation. Which chipbreaker is supplied and what is its benefit? The insert features the TSF chipbreaker, which promotes short, manageable chips and improved surface integrity when turning steels and stainless steels, reducing entanglement and easing evacuation. How is compatibility with holders ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO designation 110308, 3.18 mm thickness and the central cylindrical hole with countersink match standard ISO seats and clamping systems. What operational geometry affects cutting performance? Key geometry parameters are the 60° triangular shape, corner radius 0.8 mm, and 11° relief angle, which together balance edge strength, surface finish and heat contact, impacting tool life and part accuracy. Is this an original Tungaloy product and what is the SKU? Yes, this is an original Tungaloy indexable insert; the manufacturer article number is 6945278 and the SKU is 6945278‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T6215 Wendeplatten - Tungaloy
TPMT 110308 T6215 Drehwendeschneidplatte von Tungaloy TPMT 110308 T6215 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen TPMT110308-PSS T6215 von Tungaloy CVD-beschichtetes Hartmetall für rostfreien Stahl Dreieckige Plattenform, 11 mm Seitenlänge Zylindrisches Loch mit einseitiger Senkung 40°–60° Längere Standzeit durch CVD-Beschichtung und Hartmetall Dank der CVD-beschichtung und des harten Hartmetalls bietet die Platte eine verbesserte Verschleißfestigkeit bei der Bearbeitung von rostfreiem Stahl. Die Sorte T6215 ist speziell für stabile bis leicht unterbrochene Schnittbedingungen ausgelegt und reduziert Verschleiß an der Schneidkante. Dadurch sinkt die Stillstandszeit, und die Werkzeugwechselintervalle verlängern sich, was die Produktivität erhöht. Formgenauigkeit und Passgenauigkeit für Halter Die dreieckige Plattenform mit einer Seitenlänge von 11 mm und das zylindrische Loch mit einseitiger Senkung gewährleisten sichere Befestigung und wiederholgenaue Positionierung im Halter. Der angegebene Freiwinkel von 11° unterstützt sauberen Spanabfluss, während der Eckenradius von 0,8 mm kontrollierte Schnittkräfte liefert. Dies verbessert die Prozessstabilität und erleichtert die Werkstückplanung. Anwendungsspektrum und Werkstoffempfehlung Konzipiert für das Drehen von rostfreiem Stahl, empfiehlt sich die Platte dort, wo Oberfläche und Maßhaltigkeit zählen. Die Kombination aus Sorte, Spanformer PSS und Schneidstofftyp ermöglicht breite Werkstoffabdeckung innerhalb des rostfreien Segmentes. Anwender profitieren von hoher Reproduzierbarkeit bei Serienfertigung und von konstanten Oberflächenqualitäten. Effizienz und Integration in Prozessketten Die ISO-Normierung erleichtert die Integration der Wendeplatte in bestehende Prozessketten und sorgt für Austauschbarkeit zwischen Haltern und Systemen. Durch die stabile Spanbildung und die ausgewogene Mischung aus Standzeit und Zerspanleistung unterstützt die Platte wirtschaftliches Arbeiten bei geringem Rüstaufwand. Das trägt zu vorhersehbaren Prozessparametern und planbaren Kosten bei. Für prozesssichere Drehbearbeitung empfehlen wir die Tungaloy TPMT110308-PSS T6215; bei technischen Fragen oder zur Werkstoffabstimmung erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6903136 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6903136 Fakten Eckenradius: 0,8 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (chemische Dampfabscheidung) Sorte: T6215 (verschleißfest für rostfreien Stahl) Spanbrecher: PSS (Spanformer für stabile Schnittbedingungen) Plattenform: Dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-genormt FAQ Wie lässt sich die TPMT110308-PSS T6215 am besten einsetzen? Die TPMT110308-PSS T6215 von Tungaloy eignet sich primär für Außen- und Innendrehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen; Spanformer PSS wählen und Schnittdaten an Stabilität anpassen. Welche Vorteile bietet die CVD-Beschichtung bei dieser Platte? Die CVD-Beschichtung der Tungaloy TPMT110308-PSS T6215 erhöht die Verschleißfestigkeit und sorgt für eine längere Standzeit bei abrasiven und haftenden Zuständen im rostfreien Stahl. Welchen Einfluss hat der Eckenradius auf das Bearbeitungsergebnis? Der Eckenradius von 0,8 mm liefert eine kontrollierte Schnittkraft und verbessert die Oberflächenqualität bei gleichzeitig guter Kantstabilität. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die ISO-Genormung und die definierte Loch- und Senkgeometrie ermöglichen die Kompatibilität mit passenden Außenhaltern und Bohrstangen, sofern Form, Freiwinkel und Toleranzklasse übereinstimmen. Für welche Schnittbedingungen ist die Sorte T6215 optimiert? Die Sorte T6215 ist für stabile bis leicht unterbrochene Schnittbedingungen ausgelegt und bietet eine gute Mischung aus Standzeit und Zerspanleistung bei rostfreiem Stahl. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 110308 T6215 Wendeplatten - Tungaloy
Combining a wear-resistant CVD-coated carbide grade with a 0.8 mm corner radius and precise ISO geometry, this insert delivers consistent cycle times and predictable surface quality when machining stainless steel. Its compatibility with ISO holders and an 11° relief angle supports repeatable clamping and low-variation results. Order the TPMT110308-PM T6215 directly via Metav Werkzeuge or ask our consultants if needed. TPMT 110308 T6215 — ISO turning insert, CVD-coated carbide (Tungaloy) The TPMT 110308 T6215 is an ISO turning insert engineered for external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. TPMT110308-PM ISO turning insert CVD-coated carbide grade T6215 Corner radius 0.8 mm for precision 11° relief angle with locating hole Reliable wear resistance for steady production performance The combination of a CVD-coated surface and a carbide substrate provides enhanced abrasion resistance and thermal stability in continuous turning operations. The T6215 grade is formulated for long tool life when machining stainless steel, reducing the frequency of insert changes and contributing to lower overall process costs. CVD coatings create a hard, wear-resistant layer while preserving edge toughness; this balance helps maintain cutting edge integrity during sustained runs and gives operators predictable tool-change intervals. Precise geometry for repeatable clamping and superior finishes A controlled tool geometry ensures consistent seating, clamping and surface results across batches. The triangular 11 mm size together with the corner radius 0.8 mm and 11° relief angle give a reliable contact footprint in ISO toolholders, supporting repeatable part tolerances and surface quality. The insert’s indexed design allows quick indexing for four fresh cutting edges per insert, while the hole with cylindrical bore and single-side countersink (40°–60°) secures positive location and eliminates micro-movement that can degrade finishes. System-level compatibility and application guidance This insert is part of an ISO-system comprising the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; these parameters ensure correct seating and safe torque transmission. The PM chipbreaker is suitable for stable to lightly interrupted conditions and supports controlled chip formation, which simplifies chip evacuation and protects the workpiece surface when turning stainless steel. For complex setups, Metav Werkzeuge can advise on holder selection and clamping strategy. For application guidance or to order Tungaloy TPMT110308-PM T6215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer item number: 6903146 SKU: 6903146-Tungaloy Manufacturer SKU: TUN6903146 Designation: TPMT110308-PM T6215 Core specifications Corner radius: 0.8 mm Relief angle: 11° Inscribed circle / size: 11 mm Thickness: 3.18 mm Included angle: 60° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide (Hartmetall) Coating: CVD Grade: T6215 Chipbreaker: PM Shape: triangular Application: Turning (external and internal) Compatibility: ISO turning insert system — matching holder required FAQ What materials is this insert suitable for? The TPMT110308-PM T6215 insert is formulated primarily for stainless steel and performs best under stable to slightly interrupted turning conditions. How does the PM chipbreaker affect machining? The PM chipbreaker on the TPMT110308-PM encourages controlled chip formation for stable cutting, improving chip evacuation and helping to protect the workpiece surface. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; use an ISO-compatible external holder or boring bar with appropriate shim and clamping set for secure seating of the TPMT110308-PM T6215. How many cutting edges are available per insert? The triangular indexable design provides up to three usable cutting edges per indexed position, enabling rapid indexing and extended tool life for the TPMT110308-PM T6215. What are the key dimensional features to check before fitting the insert? Check the inscribed circle (11 mm), thickness (3.18 mm), corner radius (0.8 mm), relief angle (11°) and hole/countersink configuration to ensure proper fit and clamping of the TPMT110308-PM T6215. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T6215 Wendeplatten - Tungaloy
High wear resistance and reliable chip control from the T6215 CVD-coated carbide grade deliver consistent component quality and extended tool life; the 0.8 mm nose radius combined with an 11° clearance angle provides a balanced mix of finishing capability and edge strength. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TPMT 110308 T6215 ISO turning insert for Turning — Tungaloy The TPMT110308-TM T6215 is an ISO-format indexable insert engineered for external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 for long life Triangular ISO insert with 60° included angle 0.8 mm nose radius for reliable finishing Cylindrical hole with one-sided countersink High process reliability through wear-resistant cutting material The combination of a CVD-coated carbide substrate and the T6215 grade provides pronounced wear resistance for machining stainless steel, reducing flank wear and helping to maintain dimensional stability over longer tool life. In production environments where batch consistency matters, this indexable insert lowers the frequency of tool changes and supports predictable cycle times, which contributes directly to improved overall equipment effectiveness. Stable surface quality and controlled chip formation The TM chipbreaker geometry is optimised for stainless steel, promoting regular chip segmentation and helping to avoid long, stringy chips that interfere with handling. With a 0.8 mm nose radius the insert balances a fine surface finish with sufficient edge strength for light interrupted cuts, while the 11° clearance angle reduces rubbing and heat build-up at the flank, improving part finish and minimising the need for secondary operations. Easy integration into ISO toolholding systems As an ISO-standard triangular insert, compatibility with a toolholder is determined by form, relief angle, tolerance class, clamping method, size and thickness. The technical design—triangular shape, 3.18 mm thickness, 11 mm size and a cylindrical hole with one-sided countersink (40°–60°)—ensures secure seating in matching holders and straightforward orientation during indexing. Correct selection of a matching holder and clamping set preserves repeatability and reduces setup time on the shop floor. Practical guidance for application and productivity gains Intended for turning operations, the insert performs best when the TM chipbreaker and T6215 grade are selected to match component material and machining stability. For finishing and light roughing on stainless steel, the geometry and coating combine to reduce rework and help sustain a stable process window. The predictable performance supports lean machining strategies and contributes to lower per-part machining costs without sacrificing surface quality. For machining applications requiring consistent performance on stainless steel, contact Metav Werkzeuge for tailored recommendations and order support regarding Tungaloy inserts and compatible toolholders; Metav Werkzeuge can advise on layout, clamping and ideal combinations for specific operations. Technical data Article number: 6945283 Manufacturer SKU: TUN6945283 SKU: 6945283-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Insert designation: TPMT110308-TM Facts Nose radius: 0.8 mm Clearance angle: 11° Thickness: 3.18 mm Size: 11 mm Included angle: 60° Special features CVD-coated carbide grade T6215 TM chipbreaker tuned for stainless steel Triangular insert with cylindrical hole and one-sided countersink (40°–60°) ISO-format indexable turning insert, compatible with matching toolholders FAQ What materials is this insert designed for? The TPMT110308-TM T6215 insert is formulated primarily for stainless steel machining; the T6215 grade and TM chipbreaker favour stable to slightly interrupted cutting on that material group. Is the insert suitable for both external and internal turning? Yes, the ISO triangular format and geometry make the insert suitable for both external and internal turning when used with the correct holder and clamping system. How does the TM chipbreaker help in stainless steel applications? The TM chipbreaker promotes predictable chip segmentation on stainless steel, reducing long chip formation and improving handling and tool life. What are the key dimensions to check before ordering a holder? Confirm the insert form, clearance angle (11°), thickness (3.18 mm), size (11 mm) and hole/countersink configuration to ensure correct seating and clamping in the chosen holder. Which grade and coating does this insert use? This insert uses a CVD-coated carbide in the T6215 grade, optimised for wear resistance in stainless steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9215 PS Wendeplatten - Tungaloy
High wear resistance and breakage safety paired with ISO compatibility deliver reliable, productive turning of medium steel. Order the TPMT110308‑PS T9215 directly via Metav Werkzeuge or contact our consultants for application advice. TPMT 110308 T9215 — ISO triangular turning insert for turning (Tungaloy) The TPMT110308‑PS T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning of medium steel in continuous to slightly interrupted cuts. ISO‑standard triangular insert, PS chipbreaker CVD‑coated carbide grade T9215 0.8 mm corner radius for versatile profiling 11° clearance and 3.18 mm thickness Consistent productivity for medium steel machining The insert is built from CVD‑coated carbide in grade T9215, combining high wear resistance with elevated breakage safety to support long production runs. This composition makes the cutting edge resilient under sustained loads and helps maintain surface quality over extended cycles. The integrated PS chipbreaker promotes stable chip formation during turning, reducing the frequency of interruptions for chip clearing and increasing overall throughput. For shops aiming to balance tool life with cutting performance, the combination of coating and chip control represents a pragmatic, cost‑efficient solution that reduces downtime and tool change frequency. Seamless fit and secure clamping for reliable toolholders Interchangeability is ensured by the ISO geometry: shape, clearance, tolerance class, fixing, size and thickness determine fitment to the selected holder or boring bar. The insert features a cylindrical hole with one‑side countersink (40°–60°) and a plate thickness of 3.18 mm, helping to guarantee secure clamping and consistent repeatability. When selecting a mounting system, confirm the holder matches the triangle 60° geometry and the 11° clearance to avoid improper seating or premature edge damage. For mixed fleets or retrofit work, these standardised dimensions make replacement straightforward and minimise set‑up time. Process stability, edge life and practical benefits A 0.8 mm corner radius offers a versatile compromise between edge strength and detail capability: it supports robust cutting forces while still allowing reasonable profile work. The CVD coating reduces adhesion and abrasive wear when turning medium steels, which, together with the grade’s fracture resistance, leads to predictable tool life in both continuous and slightly interrupted operations. As a result, the insert supports consistent component quality and repeatable cycle times. For applications needing higher cutting speeds or tougher materials, consider consulting the tool data sheets to match feed and speed to the grade properties. Contact Metav Werkzeuge today for tailored application advice or to order the TPMT110308‑PS T9215 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772477 Manufacturer article number: 6772477 Manufacturer SKU: TUN6772477 SKU: 6772477‑Tungaloy Designation: TPMT110308‑PS T9215 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Core data Corner radius: 0.8 mm Clearance angle: 11° Thickness: 3.18 mm Inscribed circle / size: 11 Geometry: triangular, 60° Hole style: cylindrical hole + one‑side countersink (40°–60°) Features / Applications CVD‑coated carbide (grade T9215) PS chipbreaker for stable chip control For turning: external and internal Suited to medium steel machining Compatible with ISO‑standard holders and clamping systems FAQ What materials is this insert best suited for? The TPMT110308‑PS T9215 is optimised for medium steel machining; its CVD‑coated carbide and chipbreaker balance wear resistance and edge security for productive turning. What does the PS chipbreaker provide? The PS chipbreaker on this insert improves chip control and stability during continuous to slightly interrupted cuts, helping to reduce built‑up edge and machine stoppages. How should the insert be mounted to ensure repeatability? Ensure the toolholder matches the triangle 60° geometry, plate size and 11° clearance; the insert’s cylindrical hole with one‑side countersink secures correct seating and repeatable clamping. Can the insert handle interrupted cuts? The grade and geometry are suitable for continuous to slightly interrupted turning; heavy interruptions may require alternative grades or reinforced edge preparations. Which grade and coating does the insert use? This item uses grade T9215 with a CVD coating, combining abrasion resistance with a robust cutting edge for consistent tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110308 T9215 TM Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215 and the TM chipbreaker for reliable chip control and long tool life; the triangular ISO geometry with an 11° clearance ensures stable seating and predictable results. Order the insert directly via Metav Werkzeuge or contact the consultants for advice on holder matching and optimised process parameters. TPMT 110308 T9215 triangular turning insert — CVD‑coated carbide, 11° clearance — Tungaloy The TPMT 110308 T9215 is a triangular ISO turning insert designed for medium steel machining, offering a CVD‑coated carbide grade that balances wear resistance with fracture toughness for high‑productivity turning applications. CVD‑coated carbide grade T9215 Optimised for medium steel turning Triangular ISO insert, 11° clearance 0.8 mm nose radius with locating hole Longer runtimes through a wear‑resistant coating The CVD‑coating on this indexable insert combines a hard surface layer with a tough carbide substrate to delay abrasive wear while preserving edge strength. This CVD‑coated surface reduces flank wear under sustained cutting, which translates into fewer insert changes and more uptime on the shop floor. For production environments where repeatability matters, the balanced coating and carbide matrix support consistent component quality and predictable tool life. Stable chip control and consistent cutting performance The integrated TM chipbreaker is tuned for medium steels and provides controlled chip formation across a range of feeds and cut depths. In practical terms, this means fewer snarling chips, improved surface finish and reduced interruptions due to chip‑related issues. The grade is suitable for continuous to slightly interrupted cuts, so it supports both steady production runs and occasional variations in workpiece geometry without premature edge failure. Precise seating and system compatibility for reliable setup Constructed to ISO dimensions, the insert’s triangular form and 11° clearance simplify selection of compatible holders. Compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness, so pairing the insert with a matching clamping kit and holder is essential for repeatable clamping and positional accuracy. The 0.8 mm nose radius balances edge robustness with achievable surface finish, while the locating hole and single‑side countersink ensure secure, repeatable mounting in standard ISO toolholders. Designed for productivity and process stability With its combination of wear resistance, fracture toughness and an optimised chipbreaker, this insert supports higher material removal rates without sacrificing reliability. The technical design focuses on stable chip formation and dependable edge performance, allowing process engineers to favour throughput without compromising part quality. Where consistent batch quality and tool life are priorities, this insert provides a pragmatic solution. For recommendations on holder selection, process tuning or to procure Tungaloy turning inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application‑specific options and delivery. Technical data Manufacturer article no.: 6777826 SKU: 6777826‑Tungaloy Manufacturer SKU: TUN6777826 Model series: ISO turning indexable inserts ISO designation: TPMT110308‑TM Core data Nose radius: 0.8 mm Thickness: 3.18 mm Size: 11 mm Included angle: 60° Clearance angle: 11° Special features Grade: T9215 (CVD‑coated carbide) Chipbreaker: TM Insert shape: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Application: turning; medium steel; continuous to slightly interrupted cuts Material: carbide FAQ Which materials is this insert intended for? The Tungaloy TPMT 110308 T9215 insert is primarily specified for medium steel machining; the T9215 carbide grade offers a balance of wear resistance and toughness suited to that material class. Can the insert cope with interrupted cuts? Yes, the grade and TM chipbreaker are designed for continuous to slightly interrupted cuts; moderate interruptions are tolerated while maintaining good edge life. How should the insert be clamped to ensure repeatability? Compatibility depends on ISO‑standard holder geometry — shape, clearance, tolerance class, fastening, size and thickness — so use a matching ISO holder, correct underlay/clamp set and the specified screw to ensure stable seating. What are the key dimensions to check when ordering holders? Check the nose radius (0.8 mm), thickness (3.18 mm), the size/inscribed circle (11 mm) and the included/clearance angles (60° / 11°) to guarantee holder and insert compatibility. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110308 T9215 TSF Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215 and a precise 60° triangular geometry for reliable high‑productivity turning of medium steels; the TSF chipbreaker and 0.8 mm corner radius deliver consistent surface finish and stable chip formation. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. TPMT 110308 T9215 — Turning insert (ISO TPMT110308-TSF) by Tungaloy A TPMT 110308-TSF T9215 triangular ISO indexable insert designed for external and internal turning, optimised for medium steel machining and continuous to slightly interrupted cuts CVD‑coated carbide T9215 for medium steel ISO‑standard triangular insert 60° geometry 0.8 mm corner radius for accurate profiling TSF chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Higher throughput through wear‑resistant CVD coating The CVD‑coated carbide T9215 combines elevated wear resistance with fracture toughness, translating into longer tool life and fewer indexings during production. For medium steel applications, this grade enables increased cutting speeds and consistent dimensional stability under continuous and lightly interrupted cuts. The result is improved machine utilisation and lower unit cost per component through extended periods between tool changes. Consistent chip control and surface quality for reliable cycles The TSF chipbreaker geometry is developed to generate predictable chip forms and to evacuate swarf effectively, reducing manual intervention and downtime. Together with the 60° triangular shape and the insert’s positive clearance, the system promotes stable cutting forces and a fine surface finish. In practice, this reduces rework and supports repeatable part quality in batch production. Easy integration with ISO‑compliant toolholders for reduced setup time As an ISO‑standard insert, compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The TPMT family integrates seamlessly into standard external holders or boring bars, allowing fast replacement using the specified clamping set and screws. This standardisation shortens changeover times and simplifies inventory management for workshops and production lines. Precision features that support accurate profiles and finishing The 0.8 mm corner radius and the 11° relief angle are tuned to balance strength and edge definition: the radius resists chipping on shoulder and profiling operations while preserving geometric accuracy on turned surfaces. The plate thickness of 3.18 mm and the central hole with a 40°–60° countersink ensure secure clamping and repeatable positioning, which is particularly valuable for fine finishing passes and tight tolerances. For tailored tooling advice and prompt supply of Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application‑specific recommendations and availability Technical data Article number: 6777785 Manufacturer SKU: TUN6777785 SKU: 6777785-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: TPMT110308-TSF Specifications Plate form: triangular Size: 11 mm Corner radius: 0.8 mm Clearance angle (freiwinkel): 11° Included hole style: with hole (cylindrical hole + one‑sided countersink 40°–60°) Special features Material: carbide Coating: CVD (T9215) Chipbreaker: TSF Plate thickness: 3.18 mm Application: turning (external and internal) Typical use: medium steel machining, continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The TPMT110308-TSF T9215 insert is optimised for medium steel; the CVD‑coated T9215 grade balances wear resistance and toughness for productive steel turning. How does the TSF chipbreaker improve machining? The TSF chipbreaker on the insert promotes controlled chip formation and efficient evacuation, which helps maintain stable cutting conditions and a consistent surface finish with fewer interruptions. Is the insert compatible with standard ISO holders? Yes, the ISO designation and 60° triangular geometry make the insert compatible with ISO‑compliant external holders and boring bars when the holder matches the form, clearance angle and size. What does the 0.8 mm corner radius mean for the finished part? A 0.8 mm corner radius offers improved edge strength for shoulder cuts and profiling while maintaining the required contour accuracy for many finishing operations. Which SKU and article number identify this product? The article number is 6777785 and the SKU is 6777785-Tungaloy; the manufacturer SKU is TUN6777785 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9215 Wendeplatten - Tungaloy
High wear resistance and robust fracture toughness combine with ISO compatibility to deliver productive, repeatable turning results. Order the TPMT110308-PM T9215 inserts directly via Metav Werkzeuge or contact our consultants for application-specific guidance. TPMT110308-PM T9215 — ISO indexable turning insert, CVD-coated carbide, for turning (Tungaloy) TPMT110308-PM T9215 is an ISO-standard insert designed for productive external and internal turning of medium steels with a focus on stable chip formation and extended tool life CVD-coated carbide grade T9215 Optimised for medium steel turning Triangle shape with 60° included angle Chipbreaker PM for controlled chips Increased uptime through wear-resistant grade and chip control The combination of a CVD-coated carbide substrate and the T9215 grade provides a balance of high wear resistance and reliable fracture toughness that supports longer tool life under continuous and slightly interrupted cuts. As an indexable insert, it reduces tooling downtime because individual cutting edges can be rotated or replaced without regrinding. The chipbreaker PM is matched to the grade and the application to promote predictable chip flow, which decreases machine interruptions and contributes to a more economical cost per component. Reliable mounting and geometric consistency for precise turning Geometry and mounting features ensure compatibility with ISO-standard toolholders: the triangular shape with a 60° included angle, 3.18 mm thickness, and a corner radius 0.8 mm deliver defined engagement and repeatable cutting positions. The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) to suit common clamping systems; fitting relies on form, relief angle, tolerance class, fastening method, size and thickness. The specified 11° relief angle and an insert size 11 give stable cutting orientation and support for both external and internal turning operations in medium steels. Practical cutting performance and recommended application window This insert is optimised for the medium steel range, offering a compromise between wear resistance and edge robustness for productive machining at moderate to elevated cutting speeds. For sustained productivity, choose the T9215 grade and the PM chipformer when machining continuous or lightly interrupted cuts; the CVD coating enhances thermal stability and reduces flank wear. Operating with appropriate feeds and speeds—aligned to the machine’s rigidity and the workpiece setup—will exploit the insert’s geometry, resulting in improved surface finish and predictable tool change intervals. For technical advice or to secure Tungaloy TPMT110308-PM T9215 inserts for turning operations, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6774005 SKU: 6774005-Tungaloy Manufacturer SKU: TUN6774005 Item name: TPMT110308-PM T9215 Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 0.8 mm Thickness: 3.18 mm Relief angle: 11° Insert size: 11 Included angle: 60° Special features Grade: T9215 (CVD-coated carbide) Chipbreaker: PM Shape: triangular Hole: with cylindrical hole + single-sided countersink (40°–60°) Application: Turning (external and internal) FAQ What materials are suitable for these inserts? The TPMT110308-PM T9215 insert from Tungaloy is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness suited to continuous and slightly interrupted turning. How is the insert secured to the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) for common ISO-standard clamping systems; compatibility is determined by shape, size, thickness, relief angle and tolerance class. What does the PM chipbreaker mean for chip control? The PM chipbreaker is engineered to produce short, controllable chips in turning applications, improving process stability and reducing machine downtime when paired with the T9215 grade. Can these inserts be used for internal turning as well as external turning? Yes, the geometry—triangle shape with a 60° included angle and a 0.8 mm corner radius—suits both external and internal turning tasks when the correct holder and set-up are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9225 TSF Wendeplatten - Tungaloy
Benefit from the robust combination of a CVD-coated carbide grade and a precise 60° triangle geometry for dependable medium-to-heavy steel turning; the result is consistent performance and reduced process variability. Order the insert directly via Metav Werkzeuge or consult their specialists for application support. TPMT 110308 T9225 – ISO turning insert (triangle, 60°) by Tungaloy The TPMT110308-TSF T9225 is an ISO-format triangular turning insert engineered for medium to heavy steel machining, offering a robust CVD-coated carbide grade and a chipbreaker suited to varying engagement conditions CVD-coated carbide grade T9225 Triangle 60° geometry for external and internal turning 0.8 mm corner radius for increased edge strength Cylindrical hole with single-sided countersink (40°–60°) Reliable process security from geometry and coating The combination of a 60° triangle geometry and a CVD-coated cemented carbide substrate delivers predictable cutting behaviour in interrupted and variable cuts. The standard ISO form ensures straightforward replacement and compatibility with existing external toolholders when matched by form, clearance angle, tolerance class, clamping and thickness. The grade T9225 is formulated for mid-to-heavy steel turning where toughness is required; the coating increases thermal and abrasive resistance, reducing flank wear and helping to maintain part tolerances over longer tool life. This translates into fewer tool changes and steadier production throughput. Consistent chip control and secure clamping for stable machining The TSF chipbreaker, combined with the triangular profile and a 0.8 mm corner radius, promotes reliable chip formation under changing cutting conditions, so swarf evacuation and surface integrity remain controlled. The insert is supplied with a hole, featuring a cylindrical bore plus a single-sided countersink (40°–60°), which allows firm clamping and precise seat location in the holder. Secure clamping reduces micro-movements at the cutting edge and supports repeatable results when performing both external and internal turning operations, especially where light interruptions or depth changes occur. ISO compatibility and economical integration into production Made to the ISO designation 110308, with a plate thickness of 3.18 mm and a cutting edge radius of 0.8 mm, this insert enables a compact inventory strategy by fitting standard triangular holders and clamping systems. The ISO standardisation simplifies tool management and reduces the need for bespoke tooling. As a turning insert optimised for steel work, it offers a balance between edge toughness and wear resistance that supports longer tool life and predictable reconditioning intervals, thereby contributing to reduced overall machining costs and improved shop-floor efficiency. For tailored application advice or availability of the Tungaloy TPMT110308-TSF T9225 insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, expert assistance Technical Data Article number: 6781467 Manufacturer SKU: TUN6781467 SKU: 6781467-Tungaloy Designation: TPMT110308-TSF T9225 Material: cemented carbide Coating/grade: T9225 (CVD-coated) Chipbreaker: TSF Shape: triangular Hole: with hole (cylindrical + one-sided countersink 40°–60°) Facts Geometry angle: 60° Clearance angle: 11° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 11 mm ISO code: 110308 Special features ISO-format turning insert Robust universal grade for medium to heavy steel turning Suitable for interrupted cuts and variable engagement Compatible with standard triangular external/boring holders Stable chip formation and wear resistance FAQ What materials is this insert designed for? The TPMT110308-TSF T9225 insert by Tungaloy is designed primarily for medium-to-heavy steel machining where increased toughness and wear resistance are required. How does the TSF chipbreaker affect performance? The TSF chipbreaker on the Tungaloy insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of workpiece damage during interrupted cuts. Can this insert be used in existing ISO holders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the TPMT110308-TSF follows ISO dimensions to simplify integration with matching triangular holders. What does the cylindrical hole with countersink provide? The cylindrical bore plus single-sided countersink (40°–60°) ensures secure clamping and accurate seating in the toolholder, supporting repeatable cutting conditions with reduced vibration. Which cutting parameters benefit most from grade T9225? Grade T9225 is suited to applications requiring enhanced toughness—typically medium-to-heavy steel turning and situations with light interruptions or variable engagement where edge robustness is needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com