TPMT 130304 NS9530 Wendeplatten - Tungaloy
Benefit from a sharp cutting edge and low cutting forces for consistently improved surface quality and reduced secondary operations; the uncoated NS9530 cermet grade offers excellent finishing performance in continuous turning of Stahl. Order the inserts directly via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. TPMT 130304 NS9530 turning insert – triangular 13 mm, uncoated cermet, Tungaloy TPMT130304-23 NS9530 is an ISO‑standard turning insert designed for finishing operations on Stahl, combining a sharp cutting edge with a low cutting force geometry ISO‑standard triangular insert 13 mm Uncoated cermet grade NS9530 for finishing 0.4 mm corner radius and 11° clearance Cylindrical hole + single countersink 40°–60° High-efficiency finishing for demanding turning operations The NS9530 grade is an uncoated cermet developed for fine finishing of Stahl. Its formulation produces a sharp cutting edge and low cutting forces, which directly reduce burr formation and the need for rework. For continuous cutting and small depths of cut the result is a noticeable improvement in surface integrity and a reduction in cycle time. The insert’s geometry supports consistent chip formation and promotes predictable tool behaviour under stable machining conditions. Geometry and machining stability that simplify process planning With a triangular form and a nominal size of 13 mm, this ISO insert features a 0.4 mm corner radius and an 11° clearance angle, yielding a 60° included angle that suits fine finishing passes. The combination of these dimensions helps to maintain contact stability and minimise vibration when paired with a correctly specified holder or boring bar. Compatibility with the toolholder is governed by shape, clearance, tolerance class, clamping method, size and thickness; the ISO-standard design facilitates straightforward selection of matching holders. Clear advantages from material and chip control As an uncoated cermet grade, the insert favours low friction at the cutting edge and delivers excellent surface finish on Stahl at modest cutting speeds. The integrated chipbreaker style (designated 23) supports predictable chip formation during continuous cuts, which reduces the risk of built-up edge and helps maintain repeatable part quality. For operations prioritising cosmetic finish and tight dimensional tolerances, the cutting-material pairing and groove geometry of this insert provide both performance and process reliability. System considerations and straightforward assembly The insert forms part of an application system comprising an ISO insert, a compatible external holder or boring bar, a supporting shim/clamping set and replacement screws. The insert thickness of 3.18 mm, the cylindrical hole with a single‑side countersink (40°–60°) and the tolerance class must be checked against the chosen holder to ensure a secure clamping interface and correct rake/relief alignment. Selecting the proper clamping components improves repeatability and reduces downtime for index changes. For application guidance or to secure supply of Tungaloy TPMT130304-23 NS9530 finishing inserts, contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 to discuss holder compatibility and delivery options Technical data Article number: 6998634 Manufacturer SKU: TUN6998634 SKU: 6998634-Tungaloy Label: TPMT130304-23 NS9530 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Grade: NS9530 Design & special features Uncoated cermet cutting material Triangular insert form Cylindrical hole with single-side countersink (40°–60°) ISO-standard turning insert Chipbreaker style 23 for continuous cutting Intended for external and internal turning; finishing applications FAQ What material is the TPMT130304-23 NS9530 best suited for? The TPMT130304-23 NS9530 insert is optimised for finishing on Stahl, providing a sharp edge and low cutting forces for high-quality surface finishes. How does the 0.4 mm corner radius affect part finish? A 0.4 mm corner radius balances edge strength and surface quality: it reduces edge wear while producing a fine finish ideal for small-depth finishing passes. Is the insert plated or uncoated? The cutting grade is an uncoated cermet, chosen to provide a sharp edge and consistent surface results in continuous finishing operations. What holder features are required for reliable clamping? Reliable clamping requires a holder matching the insert form, clearance angle, tolerance class and thickness (3.18 mm); ensure the holder accepts a triangular 13 mm ISO insert and the specified clamping/shim set. Can this insert be used for internal turning as well as external turning? Yes, the ISO triangular geometry and chip control make the insert suitable for both external and internal turning applications, particularly where finishing and surface quality are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 NS9530 Wendeplatten - Tungaloy
Take advantage of a proven finishing grade for steel machining combined with precise geometry and reliable clamping: the cermet NS9530 grade delivers low cutting forces and outstanding surface quality, while the triangle geometry with a 0.4 mm corner radius ensures predictable tool behaviour. Order genuine Tungaloy inserts via Metav Werkzeuge or consult their advisors for application-specific setup and holder compatibility. TPMT 130304 NS9530 turning insert — Tungaloy, triangle 13 mm, 60° geometry The TPMT130304-24 NS9530 is a triangle ISO turning insert designed for finishing steel with an uncoated cermet grade providing a sharp cutting edge and low cutting forces ISO triangular 13 mm format Uncoated cermet NS9530 grade Sharp cutting edge for fine finishing Cylindrical hole with single-side countersink Consistent finishing performance for steel turning The combination of a fine cermet substrate and the NS9530 grade is engineered for finishing applications on steel where a sharp edge and low cutting forces are decisive. The insert’s 60° geometry and modest 0.4 mm corner radius support delicate engagement with the workpiece, minimising vibration and enabling a high-quality surface finish even at modest depths of cut. As an ISO-normed triangle insert, it offers predictable repeatability in multi-edge rotation and uniform cutting behaviour across batches. Stable chip control and suitability for continuous cuts Built with chipbreaker 24 and an uncoated cermet body, the insert is optimised for continuous cutting and small feed strategies typical of finishing passes. The geometry and chip control features reduce built-up edge tendency and contribute to a controlled flow of chips, which supports longer effective tool life and fewer process interruptions. The 11° clearance angle and a plate thickness of 3.18 mm further enhance stability in the toolholder during sustained runs. Reliable clamping and broad ISO compatibility Compatibility with holders is determined by form, clearance and tolerance class, attachment type, size and thickness; the triangular format and the cylindrical hole with a single-side countersink (40°–60°) provide secure seating in standard clamping systems. The insert’s standardised dimensions — triangle size 13 mm and 3.18 mm plate thickness — simplify selection of matched external holders and boring bars, ensuring repeatable clamping forces and consistent cutting geometry for production environments. Practical guidance for integrating the insert into workflows For finishing steel, select the NS9530 grade together with a stable external holder and modest feed to exploit the insert’s low cutting force advantage. The 0.4 mm corner radius is best for fine-profile work and small depth cuts; larger radii should be chosen where higher feed rates or roughing are required. Where continuous cuts are predominant, the uncoated cermet behaviour and chipbreaker 24 provide good chip flow and surface integrity. Technical advisors at Metav Werkzeuge can assist in selecting the appropriate holder and cutting parameters to match specific machine and workpiece conditions. For precision finishing with genuine Tungaloy inserts, contact Metav Werkzeuge for tailored advice and to secure the TPMT 130304 NS9530 inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998562 Manufacturer SKU: TUN6998562 SKU: 6998562-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 13 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 60° Special features Material: carbide Cutting material type: uncoated cermet (NS9530) Chipbreaker: 24 Hole style: cylindrical hole with single-side countersink (40°–60°) Plate form: triangular Designation: TPMT130304-24 FAQ What material is the insert optimised for? The TPMT130304-24 NS9530 insert is optimised for finishing operations on steel using the uncoated cermet NS9530 grade for low cutting forces and high surface quality. Which geometry and size does the insert use? This triangle indexable insert has a 13 mm inscribed circle, a 60° geometry and a 0.4 mm corner radius, suitable for fine finishing and multi-edge indexing. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO norms; compatibility depends on form, clearance, tolerance class, attachment, size and thickness and it is designed for standard clamping systems using a cylindrical hole with countersink. What chip control does the insert offer? The insert features chipbreaker 24, which is tuned for controlled chip flow in continuous finishing cuts and contributes to improved surface integrity. Which article and manufacturer SKUs identify this product? Article number 6998562, manufacturer SKU TUN6998562 and SKU 6998562-Tungaloy identify this Tungaloy ISO turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 NS9530 Wendeplatten - Tungaloy
TPMT 130304 NS9530 – Drehwendeschneidplatte für Drehen von Tungaloy TPMT 130304 NS9530 ist eine ISO-genormte Drehwendeschneidplatte in Dreiecksform, konzipiert für präzises Außen- und Innendrehen bei Schlichtoperationen in Stahl. ISO-genormte Bauform für standardisierte Halter Schlichtsorte NS9530 für hohe Oberflächengüte Unbeschichtetes Cermet für scharfe Schneidkante Mit Loch und Senkung für stabile Befestigung Passend für kontinuierliche Schnitte mit kleinen Zustellungen Präzise Schlichtbearbeitung mit geringem Schnittdruck Die TPMT130304-PF NS9530 bietet eine scharfe Schneidkante und niedrige Schnittkräfte, wodurch sich Oberflächenqualität und Maschinenlaufzeit verbessern. Durch die schlichte Cermet-Sorte werden Gratbildung und Nacharbeit reduziert, was insbesondere bei feineren Toleranzen wirtschaftliche Vorteile bringt. Die Platte wurde für kontinuierlichen Schnitt und kleine Zustellungen optimiert, sodass ein stabiler Fertigungsprozess möglich ist. Material und Schneidstoff: Vorteile des unbeschichteten Cermet Der verwendete Cermet-Schneidstoff ist unbeschichtet und als Schlichtsorte ausgelegt, was eine sehr scharfe Schneidkante erlaubt. Das Resultat ist eine verbesserte Oberflächengüte bei Stahlbearbeitung und reduzierte Schnittkräfte. Für Anwender bedeutet das weniger Nacharbeitaufwand und konstante Ergebnisse bei Serienfertigung. Die Verbindung aus Hartmetall-Substrat und Cermet-Eigenschaften sorgt für zuverlässige Standzeiten bei geeigneten Schnittbedingungen. Einbaumechanik und Kompatibilität für sichere Prozesse Die Platte kommt in Dreiecksform mit einem Eckenradius 0,4 mm, einer Plattendicke von 3,18 mm und einer Plattengröße von 13 mm; der Freiwinkel beträgt 11° bei einem Geometriewinkel von 60°. Die ISO-Genorm garantiert die Kompatibilität zu geeigneten Außenhaltern und Bohrstangen; Befestigung über zylindrisches Loch mit einseitiger Senkung (40°–60°) sorgt für formschlüssigen Sitz und reproduzierbare Lage beim Wechseln. Zielgruppe, Einsatzfelder und Wirtschaftlichkeit Die Wendeschneidplatte richtet sich an Fertiger, die präzise Schlichtprozesse in Stahl realisieren wollen, insbesondere in der Serien- und Feinbearbeitung. Durch die Kombination aus scharfer Schneidkante und stabiler Geometrie eignet sich die Platte für Anwendungen, bei denen geringe Schnittkräfte und hohe Oberflächengüten gefragt sind. Insgesamt trägt die Wahl der Sorte NS9530 zur Produktivitätssteigerung und zur Reduktion von Qualitätsausschuss bei. Aus Praxisgründen empfiehlt sich die TPMT130304-PF NS9530 von Tungaloy für Schlichtaufgaben in Stahl; bei Fragen zur Einsatzoptimierung kontaktieren info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6998526 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: TUN6998526 Bezeichnung: TPMT130304-PF NS9530 Fakten Radius: 0,4 mm Plattendicke: 3,18 mm Plattengröße: 13 mm Winkel: 60° Freiwinkel: 11° Hersteller Artikelnummer: 6998526 Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 (Schlichtsorte für Stahl) Spanbrecher: PF (Schlicht-Spanbrecher) Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Modellserie: ISO-Drehwendeschneidplatten Anwendung: Drehen FAQ Wie eignet sich die TPMT130304-PF NS9530 für Schlichtaufgaben in Stahl? Die TPMT130304-PF NS9530 von Tungaloy ist als Schlichtsorte ausgelegt; das unbeschichtete Cermet und der scharfe Spanbrecher PF sorgen für geringe Schnittkräfte und eine hohe Oberflächengüte, besonders bei kontinuierlichem Schnitt. Welche Halter passen zur TPMT130304-PF NS9530? ISO-genormte Außenhalter und Bohrstangen mit passender Form, Freiwinkel und Toleranzklasse sind kompatibel; die Befestigung erfolgt über das zylindrische Loch mit einseitiger Senkung. Welchen Eckenradius hat die Platte und welche Bedeutung hat das? Die Platte hat einen Eckenradius von 0,4 mm, was feinere Oberflächen und geringere Schnittkräfte bei Schlichtoperationen unterstützt. Für welche Schnitttypen ist die Platte besonders geeignet? Die Sorte NS9530 ist für kontinuierlichen Schnitt und kleine Zustellungen optimiert und eignet sich daher für präzise Schlichtoperationen in Stahlserien. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 130304 T5115 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide and a chipbreaker optimised for cast iron to improve cycle stability and extend edge life; order genuine Tungaloy tooling via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. TPMT 130304 T5115 turning insert (TPMT130304-CM) by Tungaloy — CVD-coated carbide, 60° triangle TPMT130304-CM T5115 is an ISO-format indexable turning insert designed for efficient external and internal turning of cast iron, featuring a chipbreaker matched to the material and operation. CVD-coated carbide grade T5115 for cast iron Triangle 60° form, 13 mm inscribed circle 0.4 mm corner radius for accurate profiles Cylindrical hole with 40°–60° countersink High productivity and longer edge life for cast-iron turning The CVD coating on this carbide grade offers an excellent balance between wear resistance and edge stability, which translates to longer tool life during abrasive cast-iron operations. The universal grade T5115 is tuned to reduce flank wear while maintaining cutting-edge robustness, resulting in fewer index changes and more productive machining cycles. Improved edge retention reduces unplanned interventions and supports stable process windows in series production. ISO compatibility that simplifies tool planning and changeovers Designed as part of an ISO turning insert system, the geometry and dimensions ensure interoperability with standard external holders, boring bars and clamping sets when the correct form, relief angle, tolerance class, fastening and thickness are observed. The triangular 60° shape with a 13 mm inscribed circle and a plate thickness of 3.18 mm provides a compact clamping package; the insert features a cylindrical hole with single-sided countersink (40°–60°) for secure attachment. Understanding these parameters simplifies tool selection and reduces setup time across multiple machines. Consistent chip control and dimensional accuracy for repeatable parts The CM chipbreaker is optimised for cast iron, promoting short, controllable chips and reliable evacuation even under interrupted cuts. A corner radius of 0.4 mm supports accurate profile generation while reducing cutting forces, and the 11° relief angle helps maintain stable contact at the cutting edge. Together, these features improve surface finish and dimensional repeatability, especially in medium to heavy-duty turning applications where consistent results are essential. Contact Metav Werkzeuge for application advice and to secure genuine Tungaloy TPMT130304-CM T5115 indexable inserts for reliable, productive cast-iron turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864687 Manufacturer SKU: TUN6864687 SKU: 6864687-Tungaloy Label: TPMT130304-CM T5115 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall WPL designation: TPMT130304-CM Core measurements Inscribed circle: 13 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Design / Special features Coating: CVD Grade: T5115 Chipbreaker: CM Plate shape: triangular Hole: with hole — cylindrical + single-sided countersink (40°–60°) Typical application: Turning (external and internal) System composition: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert intended for? The Tungaloy TPMT130304-CM T5115 is a universal grade developed primarily for machining cast iron; the T5115 grade combines wear resistance with edge stability for that material. How does the CM chipbreaker affect machining? The CM chipbreaker promotes short, controlled chips for cast-iron turning, improving evacuation and reducing the risk of entanglement while supporting consistent surface finish and tool life. Which holder parameters must be checked for compatibility? Compatibility depends on form, relief angle, tolerance class, fastening, inscribed circle, thickness and shape; ensure the holder matches the ISO triangular 60° geometry and the 3.18 mm plate thickness. Is the hole geometry suitable for standard clamping systems? Yes — the insert has a cylindrical hole with a single-sided countersink at 40°–60°, designed for secure clamping with compatible ISO-style screws and shims. What performance benefits does the T5115 grade deliver? T5115 offers an optimised balance of wear resistance and edge stability, enabling longer cutting intervals and reliable performance in cast-iron applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T6215 PS Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD-coated carbide, a precise 0.4 mm corner radius and ISO compatibility for reliable turning of stainless steel; order the TPMT130304-PS T6215 directly via Metav Werkzeuge or consult the team for application support. TPMT130304-PS T6215 — ISO turning insert (TPMT 130304, T6215) by Tungaloy TPMT130304-PS T6215 is an ISO-standard insert for turning, designed for stainless steel under stable to lightly interrupted conditions CVD-coated carbide grade T6215 0.4 mm corner radius for consistent finishes 11° relief angle for stable cutting geometry Triangular 13 mm insert with cylindrical hole and countersink High wear resistance for stainless steel and long tool life The CVD-coated carbide grade T6215 provides pronounced wear resistance when machining stainless steel, reducing flank and crater wear under continuous operations. This grade is formulated for predictable chip control and stable cutting-edge performance, which translates into fewer tool changes and more productive cutting cycles. The modest 0.4 mm corner radius balances edge strength with surface finish, making the insert suitable for finishing and light profiling tasks while preserving service life. Precise geometry and ISO compatibility for easy integration The insert’s ISO geometry and clear dimensional data simplify selection of a suitable holder: compatibility is determined by form, 11° relief angle, tolerance class, fastening type, size and thickness. The triangular 13 mm form factor with a cylindrical hole and single-sided countersink (40°–60°) ensures secure clamping in standard indexable holders, while the 3.18 mm plate thickness supports axial and radial rigidity. For workshops seeking repeatable results, this configuration reduces setup uncertainty and improves process stability. Practical application advice and chipbreaking options Equipped with the PS chipbreaker, this insert provides controlled chip formation for the intended material and cutting conditions. The recommended system setup comprises an ISO insert, a matching external holder or boring bar, a backing/clamp set and replacement screws; correct matching of these components minimises vibration and improves surface integrity. For slightly interrupted cuts or unstable setups, choose a chipbreaker and grade aligned to the machine rigidity to retain consistent productivity and surface quality. For optimal process security and availability, choose the Tungaloy TPMT130304-PS T6215 and contact Metav Werkzeuge for tailored application advice and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6877045 SKU: 6877045-Tungaloy Manufacturer SKU: TUN6877045 Label: TPMT130304-PS T6215 Model series: ISO-Drehwendeschneidplatten Application: Drehen Facts Inscribed circle: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Included chipbreaker: PS Geometry / ISO code: 130304 Special features Material: carbide Coating / grade: CVD-coated carbide (T6215) Shape: triangular Intended use: stainless steel, stable to slightly interrupted cutting conditions System components: ISO insert, matching holder or boring bar, backing/clamp set, replacement screws Manufacturer article number: 6877045 FAQ What materials is this insert designed for? The TPMT130304-PS T6215 is specified for machining stainless steel; the CVD-coated carbide grade T6215 is optimised for wear resistance in that material class. How is compatibility with holders determined? Compatibility depends on the insert form, 11° relief angle, tolerance class, fastening method, size (13 mm) and thickness (3.18 mm); ensure the selected external holder matches these parameters for reliable clamping of the TPMT130304-PS. Is the chipbreaker suitable for finishing operations? The PS chipbreaker on this insert supports controlled chip formation and is appropriate for finishing and light profiling when combined with the correct grade and machining parameters. Can this insert cope with interrupted cuts? This indexable insert is intended for stable to lightly interrupted conditions; for heavy interruptions, reassess holder rigidity and cutting parameters before use with the TPMT130304-PS. What are the key dimensions to check when ordering? Verify inscribed circle (13 mm), plate thickness (3.18 mm), corner radius (0.4 mm), relief angle (11°) and hole/countersink style to ensure the insert matches the clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, an efficient PSS chipbreaker, and ISO compatibility for steady turning performance on rostfreier Stahl; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT 130304 T6215 ISO turning insert – PSS chipbreaker, 60° geometry, Tungaloy The TPMT130304-PSS T6215 is an ISO-format triangular turning insert designed for reliable external and internal turning of rostfreier Stahl under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO triangular insert, 13 mm size PSS chipbreaker for rostfreier Stahl Cylindrical hole with 40°–60° countersink Extended tool life through optimised coating and substrate The combination of a CVD-coated carbide substrate and the specified grade T6215 gives noticeably improved wear resistance compared with uncoated grades. This makes the insert particularly suited to machining rostfreier Stahl where adhesive wear and built-up edge are common problems. The coating reduces flank and crater wear, which in turn extends edge life and reduces the frequency of index changes, supporting a more predictable production rhythm and lower overall tool costs. Secure locating and repeatable clamping for stable results Designed to the ISO standard, the triangular geometry and the cylindrical hole with single-sided countersink (40°–60°) ensure firm seating in compatible holders. The 60° included angle and 11° clearance combine to deliver a balance between edge strength and cutting accessibility. The defined corner radius of 0.4 mm improves edge robustness and helps achieve consistent surface finish while maintaining process reliability across repeated insert replacements. Controlled chips and efficient cutting for reduced rework The integrated PSS chipbreaker promotes effective chip control when turning rostfreier Stahl, guiding chips away from the cutting zone and minimising interruptions. This leads to fewer part handling operations, reduced risk of rework from chip damage and a smoother machining cycle. The insert is intended for use in a typical insert system that includes a matching external holder or boring bar, an underlay/shim and clamping set, and replacement screws for secure assembly. Easy selection and integration into production workflows Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters avoids mismatches and set-up delays. The ISO format facilitates rapid replacement and standardisation across machines, supporting lean tooling management. Select the chipbreaker and grade appropriate to the workpiece, machining type and machine stability to extract the full benefit of the insert’s wear properties and chip control. For machining rostfreier Stahl under stable conditions, choose the Tungaloy grade T6215 with PSS chipbreaker — contact Metav Werkzeuge for tailored advice and to order the TPMT130304-PSS T6215 (SKU 6876772-Tungaloy): info@metav-werkzeuge.com • +49 2822 7131930 Technical data Manufacturer article number: 6876772 SKU: 6876772-Tungaloy Manufacturer SKU: TUN6876772 Model series: ISO turning inserts Core specifications Geometry / ISO: 130304 (TPMT) Insert size: 13 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Hole style: cylindrical hole + single-sided countersink (40°–60°) Features and materials Material: CVD-coated carbide (Hartmetall), grade T6215 Chipbreaker: PSS Typical application: external and internal turning System components: insert, matching holder/boring bar, underlay/shim, clamping set, replacement screws Suited for: rostfreier Stahl under stable to lightly interrupted cuts FAQ Which materials is this insert intended for? The TPMT130304-PSS T6215 is formulated for machining rostfreier Stahl, offering wear resistance and chip control under stable to slightly interrupted cutting conditions. How is holder compatibility determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO 130304 geometry and the 11° clearance for correct clamping. What benefit does the PSS chipbreaker provide? The PSS chipbreaker improves chip control during turning of rostfreier Stahl, reducing chip entanglement and contributing to fewer interruptions and lower rework rates. Which dimensions are critical when replacing inserts? Check insert size (13 mm), thickness (3.18 mm), corner radius (0.4 mm), included angle (60°) and hole/countersink style to ensure correct fit and stable clamping. Can this insert be used for internal turning? Yes; the insert is suitable for both external and internal turning when paired with the appropriate boring bar or holder and when machining conditions are matched to the grade and chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade for extended wear resistance and a precise 60° triangular geometry that ensures reliable performance in turning operations; the compact 0.4 mm corner radius supports fine surface finishes while the PM chipbreaker stabilises chip formation. Order the TPMT130304-PM T6215 directly via Metav Werkzeuge or ask our consultants if needed. TPMT 130304 T6215 — ISO triangular turning insert for turning (Tungaloy) The TPMT130304-PM T6215 is an ISO-standard triangular insert designed for external and internal turning, optimised for rostfreier Stahl under stable to mildly interrupted cutting conditions CVD-coated carbide grade T6215 ISO triangular form, 60° included angle 0.4 mm corner radius for fine finishes Chipbreaker PM for stable chip control on rostfreier Stahl Increased process reliability through optimised coating and grade The CVD-coated carbide grade T6215 combines wear resistance with predictable edge behaviour, which translates into longer tool life and fewer insert changes during batch production. Using a CVD coating means the cutting edge resists abrasive wear and thermal softening better than uncoated grades; this is particularly valuable during machining of rostfreier Stahl, where built-up edge and rapid flank wear are common. The net effect is improved uptime and more consistent component tolerances, supporting higher productivity in stable cutting regimes. Consistent surface quality and chip control for turning tasks The triangular ISO geometry with a 60° included angle and a 0.4 mm corner radius delivers a balance between strength and finish capability. The PM chipbreaker is shaped to promote short, controllable chips on typical turning passes, reducing the risk of entanglement and tool damage. For parts requiring a fine finish, the small corner radius helps achieve tighter surface roughness values while maintaining edge robustness; for roughing passes, the same insert provides the stability needed for heavier cuts when machine and setup stiffness allow. Compatibility and simple integration into existing systems Compatibility with toolholders depends on form, relief angle, tolerance class, clamping style, size and thickness; the ISO designation ensures broad fitment with standard external holders or boring bars. The insert’s 3.18 mm thickness and central hole with cylindrical bore plus single-sided countersink (40°–60°) enable secure clamping and repeatable positioning. Selecting matching holders and correct clamp torque yields axial and radial stability that supports repeatable part accuracy across batches. Operational economy and application advice Choosing this ISO triangular insert helps reduce overall machining costs by lowering changeover frequency and improving process stability. The insert is tailored for turning of rostfreier Stahl under steady or slightly interrupted cutting conditions; for heavily interrupted cuts or unstable setups, consider more robust geometries or adjust cutting parameters. The combination of CVD coating, grade T6215 and the PM chipbreaker provides a pragmatic solution for general turning tasks where wear resistance and chip control are priorities. For robust, wear-resistant turning with Tungaloy inserts such as the TPMT130304-PM T6215, contact Metav Werkzeuge for availability and precise technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6877191 Manufacturer SKU: TUN6877191 SKU: 6877191-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Drehen ISO designation: TPMT130304-PM Facts Size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 60° Relief (free) angle: 11° Mounting hole: with hole; cylindrical + single-sided countersink (40°–60°) Special features CVD-coated carbide, grade T6215 Chipbreaker: PM Shape: triangular (ISO) Suitable for rostfreier Stahl machining ISO-standard insert for external and internal turning FAQ What materials is this insert suited for? The TPMT130304-PM T6215 is optimised for machining rostfreier Stahl and performs well under stable to lightly interrupted turning conditions. What does the chipbreaker PM do? The PM chipbreaker on this insert promotes short, controlled chips, improving process stability and reducing the risk of chip-related interruptions during turning. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius balances edge strength and surface quality, enabling finer finishes than larger radii while retaining sufficient toughness for standard turning passes. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility is determined by form, relief angle, tolerance class, clamping and size—use holders matched to the ISO triangular form and 3.18 mm thickness. Can it be used for internal turning as well as external turning? The insert’s triangular shape and mounting hole design allow use in both external holders and suitable boring bars for internal turning applications when holder geometry is compatible. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9215 PSF Wendeplatten - Tungaloy
Benefit from the T9215 CVD-coated carbide grade and the PSF chipbreaker for sustained productivity and reliable edge life in medium-steel turning; the robust triangular geometry with a 60° cutting angle and 0.4 mm corner radius keeps cycle times short and tool changes infrequent. Order compatible inserts and mounting components directly via Metav Werkzeuge or consult the team for application support. TPMT 130304 T9215 — ISO turning insert (TPMT130304-PSF) by Tungaloy The TPMT130304-PSF T9215 is an ISO-standard indexable turning insert designed for medium-steel machining, combining a CVD-coated carbide grade with a PSF chipbreaker for productive continuous and light interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel turning Triangular ISO plate, 60° cutting angle 0.4 mm corner radius, 11° relief angle Consistent performance where productivity matters The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balance of wear resistance and fracture toughness that supports higher material removal rates in medium-steel applications. The coating reduces flank and crater wear under continuous operation, while the substrate toughness helps resist chipping during light interruptions. For production environments where predictable tool life and stable cutting forces are essential, this insert provides a measurable improvement in uptime and part consistency. Geometry and chip control that simplify process planning A triangular ISO geometry with a 60° cutting angle and the PSF chipbreaker offer a compact cutting edge suited to a wide range of turning tasks. The 0.4 mm corner radius provides controlled edge strength for finish and light roughing passes, and the 11° relief angle supports secure seating in standard external holders. Clear, standardised dimensions reduce setup ambiguity and make tool selection straightforward when matching inserts to holders and clamping systems. System benefits: compatibility, clamping and replacement As an indexable insert, the plate is intended for use with ISO-compatible external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness. The plate’s centre hole with a single-sided countersink (40°–60°) enables positive mechanical clamping with a screw and clamp assembly, simplifying replacement cycles. Specifying standardised inserts such as this one reduces inventory complexity and shortens downtime when reindexing or exchanging worn inserts. Productivity, application scope and handling recommendations Engineered for continuous to light interrupted cuts, the insert suits turning operations on medium steels where a blend of tool life and process reliability is required. The 3.18 mm plate thickness and the triangular form support stable cutting under typical lathe spindle speeds and feed rates for this material class. When seeking higher stability in interrupted cuts, pair the insert with a rigid holder and reduced overhang; selecting the matching chipbreaker and insert grade helps maintain surface finish and extend overall tool life. For reliable medium-steel turning with proven chip control and wear resistance, request the Tungaloy TPMT130304-PSF T9215 via Metav Werkzeuge for application advice and quick supply. Technical Data Article number: 6774076 SKU: 6774076-Tungaloy Manufacturer SKU: TUN6774076 Model series: ISO turning indexable inserts Article name: TPMT130304-PSF T9215 Facts Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 13 mm Hole: with hole Countersink: 40°–60° Special features CVD-coated carbide grade T9215 PSF chipbreaker Triangular plate form Suitable for continuous and light interrupted cuts Optimised for medium steel machining Compatible with ISO external holders and boring bars Carbide material FAQ What materials is this insert best suited for? The TPMT130304-PSF T9215 insert is primarily intended for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning of this material class. What advantages does the PSF chipbreaker provide? The PSF chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement during continuous and light interrupted turning cycles. How is the insert secured in the holder? The plate features a centre hole with a single-sided countersink (40°–60°) designed for screw clamping; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness of the holder. Which operations suit a 0.4 mm corner radius? A 0.4 mm corner radius is suited to finishing and light roughing passes where a balance of edge strength and surface quality is required; it helps maintain dimensional stability without excessive cutting forces. Is the coating suitable for higher cutting speeds? The CVD-coated carbide surface of this grade enhances wear resistance and supports elevated cutting speeds typical for medium-steel production, while the carbide substrate maintains edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9215 Wendeplatten - Tungaloy
Maximise uptime by combining CVD-coated carbide wear resistance with a 0.4 mm corner radius for consistent surface finish and reliable edge life; the triangular ISO geometry and PS chipbreaker sustain productivity in medium Stahl turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. TPMT130304-PS T9215 — TPMT 130304 T9215 turning insert, CVD-coated carbide, 0.4 mm radius (Tungaloy) The TPMT130304-PS T9215 is an ISO-standard triangular indexable insert intended for external and internal turning; optimised for medium Stahl machining with a PS chipbreaker and a cylindrical hole with one-sided countersink for secure mounting. CVD-coated carbide grade T9215 0.4 mm corner radius for stable finishes PS chipbreaker for medium to continuous cuts ISO triangular insert with 11° relief Higher productivity through wear-resistant coating and robust substrate The combination of a CVD-coated surface layer and a carbide substrate provides elevated wear resistance and improved fracture toughness, which translates into longer tool life and fewer index changes in series production. The T9215 grade is specified for medium Stahl machining, offering a balance between abrasion resistance and edge security; this supports sustained cutting at productive feed and speed windows. Explaining the terminology: a CVD coating deposits hard ceramic layers that reduce flank wear, while the carbide body maintains strength under load. The result is measurable process stability and lower per-part tooling cost when machining continuous to mildly interrupted cuts. Precise geometry and ISO conformity for straightforward toolholder compatibility ISO standardisation ensures that form, relief angle, tolerance class, attachment and plate dimensions match compatible holders when selected correctly. Key geometry data such as the 11° relief angle, the triangular form with a 60° included angle and the 3.18 mm thickness all determine clamping fit and cutting orientation. The insert is supplied with hole featuring a cylindrical bore plus a one-sided countersink (40°–60°), enabling secure fixation and repeatable seating. Clear adherence to ISO specifications reduces setup time and avoids trial-and-error when fitting the insert to an appropriate external holder or boring bar. Reliable chip control and surface quality with the PS breaker and 0.4 mm radius The PS chipbreaker is designed for controlled chip formation during external and internal turning in medium Stahl, promoting smooth evacuation and consistent surface finish. The 0.4 mm corner radius supports fine finishing passes and increases edge strength for light interruptions, helping to avoid premature chipping under unstable cutting conditions. For production environments seeking repeatable quality, this insert delivers a predictable combination of chip control and edge life, making it well suited to machining tasks that demand both throughput and a reliable surface result. Contact Metav Werkzeuge for tailored application advice and to secure the Tungaloy TPMT130304-PS T9215 insert optimised for reliable medium Stahl turning Technical data Article number: 6772478 SKU: 6772478-Tungaloy Manufacturer SKU: TUN6772478 Model series: ISO-Drehwendeschneidplatten ISO designation: TPMT130304-PS Name/label: TPMT130304-PS T9215 Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Thickness: 3.18 mm Size: 13 mm Special features CVD-coated carbide (T9215) PS chipbreaker Triangular insert form With hole: cylindrical bore + one-sided countersink (40°–60°) ISO-standard turning insert Intended application: turning Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The TPMT130304-PS T9215 insert is designated as a first choice for medium Stahl machining, combining wear resistance and fracture toughness suitable for productive turning operations. Which chipbreaker is fitted and what are the benefits? This insert features the PS chipbreaker, optimised for continuous to slightly interrupted cuts to ensure stable chip control and consistent surface quality in turning. How does the ISO designation affect holder selection? ISO conformity means that form, relief angle, tolerance and thickness are standardised; matching these parameters to the toolholder guarantees correct seating and repeatable clamping for the TPMT130304-PS T9215. Is the insert suitable for internal turning as well as external turning? Yes, the geometry and chip control of the TPMT130304-PS T9215 make it appropriate for both external and internal turning applications when used with a compatible holder. Which order or catalogue reference should be used? Use article number 6772478 or SKU 6772478-Tungaloy when ordering the TPMT130304-PS T9215 from Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide T9215 grade and an optimised PSS chipbreaker to achieve consistent productivity in medium-steel turning; the triangular ISO format and precise 0.4 mm corner radius deliver predictable tool life and surface finish. Order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. TPMT 130304 T9215 turning insert by Tungaloy — ISO triangular insert with PSS chipbreaker TPMT130304-PSS T9215 is an ISO‑standard indexable turning insert designed for medium‑steel machining and for use in compatible triangular holders CVD-coated carbide T9215 Optimised PSS chipbreaker Triangular ISO 13 mm format 11° clearance; 0.4 mm corner radius Delivering higher throughput with wear-resistant CVD coating The CVD-coated cutting grade T9215 pairs high wear resistance with good fracture toughness, enabling longer cutting lengths under continuous to slightly interrupted turning conditions. As a carbide option optimised for medium‑steel workpieces, this insert reduces downtime for tool changes and supports steady machining cycles. The result is improved process economy through lower tooling consumption and fewer unplanned stops, making the component a reliable choice where sustained productivity matters. Predictable chip control and stable cutting geometry The integrated PSS chipbreaker promotes consistent chip formation and evacuation, which directly improves cycle stability and surface quality. The triangular ISO form and central hole with a one‑sided countersink ensure firm clamping and repeatable seating in standard toolholders; compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness. Clear chip control reduces the risk of rework and helps maintain machining accuracy over longer production runs. Precision edge and robust mechanical design for consistent finishes A 0.4 mm corner radius and an included angle of 60° deliver a balance between strength and achievable surface finish, while the 3.18 mm plate thickness adds rigidity under load. The 11° clearance angle reduces rubbing and supports stable cutting at standard feed rates. Together these geometric parameters make this indexable insert suitable for turning tasks that require a predictable tolerance and repeatable component quality, especially in batch production and serial machining. Contact Metav Werkzeuge for application support and to request tailored recommendations on Tungaloy inserts — our specialists can advise on holder compatibility and optimal cutting data Technical Data Article number: 6773982 Manufacturer SKU: TUN6773982 Label: TPMT130304-PSS T9215 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating/sort: T9215 Facts Corner radius: 0.4 mm Insert size: 13 mm Plate thickness: 3.18 mm Included angle: 60° Clearance angle: 11° Manufacturer article number: 6773982 Special features Triangular plate form PSS chipbreaker Cylindrical hole with one-sided countersink 40°–60° CVD-coated carbide cutting material For turning; suitable for medium steel ISO-standardised turning insert FAQ Which materials is this insert best suited for? The TPMT130304‑PSS T9215 indexable insert from Tungaloy is engineered primarily for medium steel machining; the CVD-coated T9215 grade balances wear resistance and fracture toughness for continuous to slightly interrupted cuts. What advantage does the PSS chipbreaker provide? The PSS chipbreaker promotes reliable chip formation and evacuation, reducing chip entanglement and improving surface finish when the TPMT130304‑PSS T9215 insert is used in standard turning operations. How is holder compatibility determined for this type of insert? Compatibility depends on holder form, relief (clearance) angle, tolerance class, fastening method, insert size and plate thickness; the TPMT130304‑PSS conforms to ISO triangular standards and requires a matching 13 mm toolholder. Can this insert be used for interrupted cutting? The Tungaloy TPMT130304‑PSS T9215 is suited to continuous and slightly interrupted cuts; for heavy or highly interrupted machining, a different grade or a tougher geometry should be considered. What does a 0.4 mm corner radius mean for machining results? A 0.4 mm corner radius offers a compromise between edge strength and surface finish: it increases edge robustness compared with smaller radii while still delivering good dimensional control for typical turning tasks. What is the mounting style of the insert and its effect? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that ensures secure, repeatable clamping in compatible indexable holders and contributes to consistent positioning and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Reliable cutting performance for medium to heavy steel turning is achieved through the combination of a CVD-coated carbide grade and a compact 0.4 mm nose radius, delivering stable profiles and longer edge life under variable engagement. The ISO form and standard fixing geometry ensure fast tool changes and compatibility with ISO holders. Order the TPMT130304-23 T9225 directly via Metav Werkzeuge or ask our consultants for tailored recommendations. TPMT130304-23 T9225 — ISO triangular turning insert, CVD-coated carbide (Tungaloy) The TPMT130304-23 T9225 is an ISO triangular turning insert designed for external and internal turning, offering a universal, robust grade for medium to heavy steel machining. ISO triangular insert TPMT130304-23, T9225 grade CVD-coated carbide for robust performance 0.4 mm nose radius for profile stability 11° clearance angle for reliable cutting With hole and 40°–60° countersink for secure fixing High-performance grade for variable cutting conditions The T9225 designation denotes a CVD-coated carbide grade engineered for robustness during medium to heavy steel machining. Its chemistry and coating provide a balance of wear resistance and toughness, which is advantageous when cuts are slightly interrupted or when engagement varies. As a result, edge life is extended and process reliability increases, supporting higher productive throughput and fewer unplanned tool changes. The insert’s universal character makes it suitable across a range of turning tasks while maintaining consistent surface finish and dimensional control. Secure clamping and geometry that supports repeatability A triangular geometry with a 60° included angle and a 0.4 mm nose radius offers stable profile generation and predictable corner wear, which benefits operations that require repeatable part geometries. The insert is supplied with a cylindrical locating hole plus a single-sided countersink (40°–60°) for secure fixing and optimal seat contact; combined with an 11° clearance angle and a plate thickness of 3.18 mm, this creates a rigid assembly that minimises chatter and improves process stability. Compatibility with ISO holders is determined by form, clearance, tolerance class, fastening and size, ensuring straightforward selection of matching clamping systems. Practical system advice and application efficiency For efficient implementation, the insert functions as part of a system consisting of the indexable insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws. Selecting the correct chipbreaker 23 and the T9225 grade for the specific steel grade and cutting conditions will reduce cycle times and tool consumption. The robust combination of geometry and coating supports longer tool life, lowers machine downtime and contributes to predictable production costs. If clarification is required regarding holder compatibility or optimal feed/speed recommendations, technical guidance is available at Metav Werkzeuge (info@metav-werkzeuge.com; +49 2822 7131930). Contact Metav Werkzeuge for selection support and to secure original Tungaloy inserts; our specialists will advise on holder compatibility and the ideal chipbreaker for the application. Technical data Article number: 6781204 Manufacturer SKU: TUN6781204 Our SKU: 6781204-Tungaloy Model designation: TPMT130304-23 T9225 Manufacturer: Tungaloy Core data Nose radius: 0.4 mm Clearance angle: 11° Included angle: 60° Plate size: 13 mm Plate thickness: 3.18 mm Chipbreaker: 23 Design & features Triangular insert form Cylindrical hole + single-sided countersink (40°–60°) CVD-coated carbide Grade T9225 Intended application: external and internal turning Compatible with ISO turning holders FAQ What materials is this insert intended for? The TPMT130304-23 T9225 is formulated primarily for medium to heavy steel machining and performs well under variable engagement where toughness is required. How does the T9225 grade affect tool life? The T9225 CVD-coated carbide grade combines wear resistance and toughness, which improves edge stability and extends life in interrupted cuts and heavy-duty turning tasks. Which holders are compatible with this insert? Compatibility is determined by the insert’s form, 11° clearance, tolerance class, fastening and thickness; matching ISO external holders or boring bars that accept TPMT triangular inserts are appropriate. What is the purpose of the hole and countersink? The cylindrical hole with a 40°–60° single-sided countersink ensures secure fixing and precise seat contact, which enhances repeatability and reduces the risk of insert movement during machining. Can this insert be used for internal turning? Yes, the TPMT130304-23 T9225 is suitable for both external and internal turning operations when paired with the correct boring bar and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of an CVD-coated carbide grade designed for robustness, precise geometry for stable clamping, and a chipbreaker engineered for reliable chip control to maintain productive turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for matching holder and application advice. TPMT 130304 T9225 – Turning insert (ISO, triangular, 13 mm) by Tungaloy The TPMT130304-PSF T9225 is an ISO-compliant turning insert for external and internal turning, offering a CVD-coated carbide grade tailored to medium to heavy steel machining. CVD-coated carbide grade T9225 Universal for medium to heavy steel turning Triangular 13 mm plate, 0.4 mm radius 11° clearance with cylindrical hole and countersink High-performance grade for variable steel turning The insert is based on a CVD-coated carbide substrate in grade T9225, developed for robust chip formation and extended edge life under fluctuating engagement conditions. This composition provides increased toughness compared with conventional grades, which makes the insert particularly suitable when interruptions in the cut or variable depth of cut occur. The result is predictable tool life and fewer unexpected tool changes, supporting higher machine uptime and consistent cycle times for production and job-shop environments. Precision geometry for stable clamping and consistent surface finish Geometrical parameters—including the 0.4 mm radius, 11° clearance and the 60° included angle of the triangular plate—deliver a balance between cutting strength and surface integrity. The ISO-compliant form and the central hole (cylindrical with a one-sided countersink at 40°–60°) permit secure, repeatable clamping in standard holders. Secure fastening reduces chatter and vibration, which improves dimensional accuracy and surface finish while enabling more aggressive feeds where the process allows. Practical integration and efficiency in daily workshop use Designed as part of an ISO turning system, the insert pairs with a suitable external holder or boring bar plus an underlay/clamp set and replacement screws; this modular approach simplifies inventory and replacement. The PSF chipbreaker channels chips reliably in steel applications, reducing recutting and easing swarf handling. Specified for medium to heavy steel turning, this solution supports cost-effective production by combining longer edge life and adaptability to changing cut conditions, reducing downtime and contributing to predictable process economics. Contact Metav Werkzeuge for application advice and ordering of Tungaloy TPMT 130304 T9225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781011 SKU: 6781011-Tungaloy Manufacturer SKU: TUN6781011 Name: TPMT130304-PSF T9225 Brand: Tungaloy Core specifications Plate designation: TPMT130304-PSF Size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 60° Hole: cylindrical with one-sided countersink 40°–60° Special features Material: carbide Coating: CVD-coated Grade: T9225 Chipbreaker: PSF Application: external and internal turning Compatible system: ISO turning insert with matching holder, underlay, clamp and screws FAQ What materials is this insert best suited for? The TPMT130304-PSF T9225 insert is optimised for medium to heavy steel machining, offering toughness and chip control for interrupted cuts and variable engagement. Does the insert fit standard ISO holders? Yes, the plate is an ISO-compliant triangular insert; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness with the chosen holder. How does the PSF chipbreaker affect machining? The PSF chipbreaker geometry promotes short, controllable chips in steel turning, reducing recutting and improving swarf evacuation for safer, more stable operations. Can the insert be used for internal turning as well as external turning? The TPMT130304-PSF T9225 triangular insert is suitable for both external and internal turning when installed in the appropriate external holder or boring bar designed for triangular ISO inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Combine the CVD-coated carbide with ISO compatibility and a compact 0.4 mm corner radius for reliable medium- to heavy-steel turning; order TPMT130304-PM T9225 via Metav Werkzeuge or consult our specialists for application advice. TPMT 130304 T9225 TPMT130304-PM – ISO turning insert, CVD-coated carbide, triangle, 0.4 mm, Tungaloy TPMT130304-PM T9225 is an ISO-format triangular turning insert designed for external and internal turning operations in medium to heavy steel machining. CVD-coated carbide for robust machining Triangle ISO insert with 60° included angle 0.4 mm corner radius for precision turning Cylindrical hole with 40°–60° countersink Consistent performance under varying cutting conditions The CVD-coated carbide grade T9225 provides a balance of toughness and wear resistance, making it suitable when cuts are intermittently interrupted or engagement conditions vary. As an ISO-standard triangular insert with a 60° included angle, the geometry supports stable toolholding and predictable chip formation. These attributes reduce the risk of premature edge failure and maintain machining accuracy over longer runs, leading to improved process reliability and fewer unplanned tool changes. Compatibility and mounting: what to check before use Compatibility with a toolholder depends on multiple dimensional and form factors: insert shape, clearance angle, tolerance class, clamping method, size and thickness. The triangular insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to suit a broad range of external holders and boring bars. Verify the holder’s seating and clamping arrangement match the insert’s 3.18 mm thickness and 13 mm size to ensure secure fixation and repeatable positioning; secure clamping minimises vibration and supports improved surface finish. Chip control and application benefits for steel turning The integrated PM chipbreaker is designed for efficient chip formation when machining steels under moderate to heavy cut depths. Combined with the CVD-coated carbide substrate, the chipbreaker helps direct swarf away from the cutting zone, reducing re-cutting and heat concentration at the edge. For workshops aiming for a robust, general-purpose turning solution, this grade and geometry produce consistent results across varying feeds and depths, improving uptime and reducing the need for frequent regrinds. Discuss the CVD-coated T9225 grade and ordering options with Metav Werkzeuge—contact our technical sales team at info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific guidance and the best holder recommendations. Technical data Article number: 6781134 Manufacturer SKU: TUN6781134 Label: TPMT130304-PM T9225 SKU: 6781134-Tungaloy Facts Corner radius: 0.4 mm Thickness: 3.18 mm Size: 13 Clearance angle: 11° Included angle: 60° ISO designation: 130304 Special features CVD-coated carbide (T9225) PM chipbreaker Triangular insert form Cylindrical hole with single-sided countersink (40°–60°) For external and internal turning of steel ISO-standard indexable insert FAQ What materials is this insert suited for? The Tungaloy TPMT130304-PM T9225 insert is specified for medium to heavy steel machining thanks to its CVD-coated carbide grade and robust chipbreaker geometry. How is the insert located and secured in the holder? The insert uses a cylindrical centre hole with a single-sided countersink (40°–60°) for mechanical clamping; ensure the holder matches the 13 mm size and 3.18 mm thickness for correct seating. Can the TPMT130304-PM T9225 cope with interrupted cuts? Yes, the T9225 grade emphasises toughness and stable edge life, making the insert appropriate for intermittently interrupted cuts common in roughing or unstable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide T9225, reliable PSS chip control and ISO compatibility for consistent medium to heavy turning operations; order directly via Metav Werkzeuge or consult the specialists for application-matched holders and clamping sets. TPMT130304-PSS T9225 — ISO triangular turning insert with PSS chipbreaker for medium–heavy steel turning (Tungaloy) TPMT130304-PSS T9225 is a triangular, ISO‑standard indexable insert designed for external and internal turning where intermittent cuts or variable engagement demand a tougher grade CVD-coated universal grade T9225 PSS chipbreaker for controlled chips Triangle 13 mm size for versatile turning 11° clearance with 0.4 mm nose radius Durable coating for consistent cutting performance The CVD‑coated carbide grade T9225 is formulated for robust, universal performance in medium to heavy steel machining. The chemically vapour deposited coating increases thermal and abrasive resistance, so cutting edge wear is reduced under fluctuating cutting conditions. This results in longer tool life and fewer insert changes, which supports steady production rates and predictable maintenance intervals. The grade’s toughness helps when light interruptions occur, making the insert suitable for a range of common shopfloor scenarios. Stable chip control to protect process reliability Equipped with the PSS chipbreaker, the insert delivers improved chip formation and evacuation, which reduces the risk of entanglement and tool damage. Stable chip flow lowers the chance of surface defects and decreases the need for secondary finishing, contributing to higher first‑pass yield. In practice, better chip behaviour supports continuous operation and reduces unplanned stoppages, enhancing both throughput and cost efficiency for batch and single‑piece production alike. Precise geometry for predictable part quality The insert features an 11° clearance angle and a 0.4 mm nose radius, with a thickness of 3.18 mm and a nominal size of 13 mm. These geometric values balance strength and detail: the relatively small nose radius suits medium finishing passes while the insert body ensures rigidity during heavier cuts. The included 60° triangle geometry provides three indexable cutting edges per insert, enabling economical edge usage and repeatable part dimensions when clamping and holder rigidity are maintained. ISO compatibility for straightforward system integration The component is an ISO‑standard turning insert (designation TPMT130304‑PSS) with a cylindrical hole and single‑side countersink at 40°–60°, designed to be used with matching triangular external holders or boring bars, a locating shim and a suitable clamp/screw set. Compatibility with a given holder is determined by the insert form, clearance angle, tolerance class, fixing method, nominal size and thickness. This standardised approach simplifies procurement and replacement logistics and allows established toolholding systems to be used without modification. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts, compatible holders and clamping sets — email info@metav-werkzeuge.com or call +49 2822 7131930 for targeted technical advice and availability Technical data Manufacturer's article number: 6781003 Manufacturer's SKU: TUN6781003 Our SKU: 6781003-Tungaloy ISO designation: TPMT130304-PSS Model series: ISO turning inserts Material: Carbide (cemented carbide) Facts Insert size: 13 mm Thickness: 3.18 mm Nose radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Grade: T9225 Coating: CVD-coated carbide Chipbreaker: PSS Shape: triangular Hole: with cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) FAQ What material applications suit this insert best? The CVD‑coated carbide grade T9225 is intended for medium to heavy machining of steel and is selected where intermittent cutting or varying engagement requires additional toughness. How does the PSS chipbreaker influence machining? The PSS chipbreaker promotes controlled chip formation and evacuation, reducing entanglement and aiding consistent surface finish and process reliability with the TPMT130304‑PSS insert. Which holders are compatible with the insert? Compatibility depends on holder form, clearance, tolerance class, fixing and size; the insert is ISO‑standard so matching triangular external holders or boring bars with the correct shim and clamp are required. How many cutting edges does the triangular insert provide? The triangular geometry with the specified dimensions supplies three indexable edges, allowing economical re‑indexing and repeatable cutting performance. Is the insert suitable for interrupted cuts? Yes — the toughness of the T9225 grade combined with the insert geometry is intended to withstand light‑to‑moderate interruptions in the cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9225 grade for robust medium–heavy steel machining, a precise 0.4 mm corner radius for reliable edge stability and ISO compatibility for straightforward tool integration; order the TPMT130304-24 T9225 insert directly via Metav Werkzeuge or consult our specialists for application support. TPMT 130304 T9225 — ISO triangular turning insert for Turning, CVD-coated carbide, 0.4 mm radius (Tungaloy) TPMT130304-24 T9225 is an ISO-format triangular turning insert engineered for external and internal turning operations where interrupted or variable engagement requires enhanced toughness and secure clamping. TPMT 130304 geometry, ISO standard CVD-coated carbide grade T9225 0.4 mm corner radius for stable cuts Cylindrical hole with 40°–60° countersink Consistent performance on medium–heavy steel The T9225 grade is a CVD-coated carbide developed as a robust universal solution for the medium–heavy steel sector. Its microstructure balances hardness and toughness to tolerate changing engagement conditions and light interruptions without premature chipping. The modest 0.4 mm corner radius helps to distribute cutting forces, reducing the risk of edge fracture and delivering predictable tool life under tougher feeds. For applications requiring controlled chip formation, the chipbreaker 24 promotes manageable chip shapes and safer evacuation. Secure seating and repeatable clamping for production use Compatibility with tools is determined by form, relief, tolerance class, fastening, size and thickness; the ISO format of this triangular insert ensures straightforward integration with standard holders when those parameters match. The 11° relief angle and 3.18 mm thickness provide stable support in the pocket, while the triangular shape and cylindrical hole with a single-sided countersink (40°–60°) enable positive location and reliable clamping. This design reduces movement in the seat and makes index changes quick and repeatable, supporting uninterrupted production cycles. Longer tool life and process stability through coating and system design A CVD finish on cemented carbide improves abrasion resistance and thermal stability, which in practice means longer intervals between index changes and consistent workpiece finish across batches. When combined with a matched holder or boring bar and the correct shim/clamping set, the insert forms part of a compact system that is easily serviced with spare screws and replacement inserts. The result is reduced machine downtime, predictable maintenance intervals and improved throughput for shopfloors handling mixed-part production. Practical selection guidance for reliable turning This insert is intended for external and internal turning and is especially suitable where interrupted cuts or variable engagement occur. Select the chipbreaker 24 and the T9225 grade when the workpiece material and machining stability demand higher toughness. For fine finishing or very soft materials, consider alternative radii or grades; for heavy roughing, the universal nature of this insert will still offer good wear resistance and edge security. Confirm holder compatibility before ordering to ensure optimal performance. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to arrange supply through Metav Werkzeuge. Technical data Article number: 6781109 Manufacturer SKU: TUN6781109 Retail SKU: 6781109-Tungaloy Product label: TPMT130304-24 T9225 Dimensions & core data Shape: triangular Plate size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Chipbreaker: 24 Materials & features Material: cemented carbide (Hartmetall) Coating: CVD Grade: T9225 (robust universal for medium–heavy steel) Hole style: cylindrical hole + single-sided countersink (40°–60°) Compatibility: ISO-series turning insert; requires matching holder form, relief, tolerance, fastening, size and thickness Application: turning; external and internal turning; suitable for interrupted cuts System components: insert, external holder or boring bar, shim/clamping set, spare screws FAQ What workpiece materials is this insert suited for? The TPMT130304-24 T9225 insert is specified for medium–heavy steel machining; the T9225 grade and CVD coating give a balance of toughness and wear resistance suitable for steels and operations with variable engagement. How does the 0.4 mm corner radius affect cutting? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping under interrupted cuts, which helps the insert deliver more consistent tool life when roughing or semi-finishing. Is special tooling required to use this ISO insert? No special tooling is required, but correct matching of holder geometry is essential; the insert must be used with a compatible external holder or boring bar and the proper shim/clamping set to ensure secure seating and repeatable results. What role does chipbreaker 24 play in machining? The chipbreaker 24 is designed to control chip form for safer evacuation and improved surface quality; it is particularly useful when machining longer chips or when machining parameters vary. Can this insert handle interrupted cuts? Yes, the combination of the T9225 grade and the insert geometry makes it suitable for interrupted cuts, offering enhanced toughness to withstand changing engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 T9225 Wendeplatten - Tungaloy
Benefit from a robust, CVD-coated carbide T9225 grade and an ISO-indexable triangular geometry with a 0.4 mm corner radius for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or ask the consultants for application advice. TPMT 130304 T9225 triangular turning insert by Tungaloy — CVD-coated, PS chipbreaker TPMT 130304 T9225 is an ISO-indexable turning insert designed for external and internal turning in steel, combining a triangular geometry with a PS chipbreaker for stable chip control *ISO triangular insert TPMT 130304 format *CVD-coated carbide T9225 for robust steel machining *PS chipbreaker engineered for medium to heavy turning *0.4 mm corner radius; 11° clearance; with centre hole Reliable performance for variable cutting conditions The CVD-coated carbide grade T9225 offers a blend of wear resistance and toughness tailored to variable engagement and slightly interrupted cuts. With a triangular form and a dedicated PS chipbreaker, the insert promotes stable chip formation during medium to heavy steel machining, which in turn reduces unscheduled tool changes and supports steady cycle times. This combination delivers consistent cutting edges and predictable performance for both batch production and mixed-series work. ISO compatibility and secure mounting for production use Compatibility with toolholders follows ISO conventions: the holder match depends on form, relief angle, tolerance class, fastening method, size and thickness. The designation identifies the format and mounting features — a 60° included angle, 11° relief, 0.4 mm corner radius and a centre mount with a cylindrical hole and one‑side countersink (40°–60°) — ensuring secure clamping and simple seat alignment. The indexable layout permits fast indexing and consistent edge reuse, supporting predictable set-up times and minimal interruption to machining flow. Practical benefits for workshop efficiency As a robust universal grade for steel turning, the insert supports processes where changing depth of cut or light interruptions require added toughness. The compact 13 mm size and 3.18 mm thickness suit common internal and external turning tasks while the 0.4 mm corner radius balances form accuracy with corner strength. Used with an appropriate external holder or boring bar and a proper clamp/shim set, the insert helps to reduce downtime, improve surface consistency and streamline tool management in an industrial environment. For availability, technical matching and delivery options for this Tungaloy turning insert, contact Metav Werkzeuge — technical enquiries: info@metav-werkzeuge.com • Tel: +49 2822 7131930 — our team will advise on holder compatibility and batch supply Technical data Article number: 6781157 Manufacturer SKU: TUN6781157 SKU: 6781157-Tungaloy Brand: Tungaloy Designation: TPMT130304-PS T9225 Numerical data Corner radius: 0.4 mm Relief/clearance angle: 11° Included angle: 60° Plate thickness: 3.18 mm Plate size: 13 mm Special features Material: cemented carbide Coating: CVD-coated (grade T9225) Chipbreaker: PS Plate shape: triangular Mounting: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) FAQ What turning tasks is this insert best suited for? This insert, the TPMT130304-PS T9225 from Tungaloy, is intended for external and internal turning of steel components where medium to heavy cuts or light interruptions occur. How is the insert mounted in a holder? The TPMT130304-PS uses a centre mounting with a cylindrical hole and a single-side countersink (40°–60°); holder compatibility is determined by form, relief angle, tolerance class, fastening and thickness. What advantages does the T9225 grade provide? Tungaloy’s T9225 grade combines toughness and wear resistance via a CVD coating, offering stable chip formation and extended edge life under variable engagement conditions. Is the PS chipbreaker suitable for interrupted cuts? Yes, the PS chipbreaker is engineered to manage chip flow in medium to heavy turning and supports interrupted or variable cutting conditions with reliable evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade optimised for stainless steels, a sharp yet stable cutting edge and full ISO compatibility to maintain production flow. Order the TPMT130308-PS AH6225 insert directly via Metav Werkzeuge or consult the technical team for application advice. TPMT130308-PS AH6225 – ISO triangular turning insert for turning, PVD-coated carbide by Tungaloy The TPMT130308-PS AH6225 is an ISO-format triangular insert designed for external and internal turning of stainless steels, offering a sharp, stable cutting edge for medium-duty machining. PVD-coated carbide grade AH6225 Sharp and stable cutting edge for stainless steels ISO 130308 triangular geometry for secure clamping 11° clearance angle with 0.8 mm corner radius Reliable, repeatable cutting performance for stainless steels With a PVD-coated carbide substrate and the AH6225 grade, this insert provides a balanced combination of edge sharpness and thermal stability that reduces workhardening and improves chip control when machining stainless steels. The coating enhances wear resistance and adhesion control at typical turning temperatures, which translates into consistent surface finish and predictable tool life. For production environments where process stability is paramount, the insert supports sustained productivity with fewer interruptions for tool changes. Secure clamping and ISO compatibility for flexible use Designed to the ISO 130308 specification, the triangular plate features a 60° included angle and is compatible with holders that match form, clearance and tolerance class. The centre hole with a cylindrical bore and one-sided countersink (40°–60°) allows reliable clamp engagement and repeatable positioning, reducing downtime during index changes. The 13 mm size and 3.18 mm thickness deliver a robust seating area, while the 0.8 mm corner radius offers a compromise between edge strength and cutting freedom, making the insert suitable for both external profiles and internal bores. Practical advantages from geometry and coating choices The combination of an 11° clearance angle and the PS chipbreaker geometry promotes controlled chip formation during medium turning operations, limiting vibration and improving tool-to-workpiece contact conditions. For workshops machining a range of stainless grades under variable stability conditions, the plate’s design helps to extend productive cutting time and reduce scrap rates. The technical choices behind the insert support a simplified tooling strategy: one universal grade for many stainless applications, with clear benefits in surface integrity and repeatable results. For dependable turning of stainless steels select the Tungaloy AH6225 inserts and contact Metav Werkzeuge for tailored application support and supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6831297 SKU: 6831297-Tungaloy Manufacturer SKU: TUN6831297 Model series: ISO-turning inserts Facts Insert designation: TPMT130308-PS AH6225 Insert form: triangular Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Special features Grade/coating: AH6225 (PVD-coated carbide) Hole: cylindrical bore + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert designed for? The TPMT130308-PS AH6225 is formulated primarily for stainless steels, delivering a sharp, stable cutting edge suited to medium-duty turning of these alloys. Which holders are compatible with this plate? Holders that conform to the ISO 130308 geometry and match form, clearance, tolerance class, size and thickness will be compatible with this triangular insert. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip formation, improving chip evacuation and reducing vibration during medium turning operations with the AH6225 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade (AH6225) and a sharp yet stable cutting edge for reliable medium‑duty turning in stainless steels; compatibility with ISO holders ensures straightforward integration into existing tool systems — order directly via Metav Werkzeuge or consult our specialists for application guidance. TPMT130308 AH6225 – ISO triangular turning insert, PVD‑coated carbide by Tungaloy (0.8 mm radius, 60°) A TPMT130308‑PM AH6225 indexable turning insert designed for external and internal turning, optimised for machining stainless steels and adaptable to a wide range of shopfloor conditions PVD‑coated carbide AH6225 for rostfreier Stahl 0.8 mm nose radius for precise form control 60° triangular geometry for versatile turning Compatible with ISO holders and clamping systems Cylindrical hole with single‑side countersink 40°–60° Proven grade and coating for consistent stainless‑steel results The combination of a PVD‑coated surface and the AH6225 carbide grade yields a cutting edge that balances sharpness with robustness. This composition is tailored for machining stainless steels, providing improved wear resistance and thermal stability compared with uncoated grades. For production environments with variable cutting parameters, this mix reduces edge chipping and supports reproducible surface quality. The result is less frequent index changes and a steadier process window for serial turning operations. Geometry and system compatibility that simplify tool planning With a 60° triangular form, 0.8 mm nose radius and 11° clearance, the insert offers a familiar geometry that fits standard ISO toolholders when matched by form, tolerance class, clamping and thickness. The plate thickness of 3.18 mm and the 13 mm size make the component mechanically robust while remaining suitable for compact holders and boring bars. The cylindrical hole with a single‑side countersink (40°–60°) secures reliable clamping and repeatable seating, minimising runout and improving repeatability across production batches. Practical benefits in everyday turning and tool management Integrated into a system consisting of the insert, a compatible external holder or boring bar, a shim/clamping kit and replacement screws, this solution streamlines tool change and inventory management. The PM chipbreaker geometry supports medium cutting depths and helps to control chip formation in ductile, work‑hardening stainless grades. For workshop planners, the main advantages are predictable tool life, stable chip control and reduced downtime — factors that contribute to consistent part quality and cost efficiency over time. For advice on selecting the correct insert geometry or chipbreaker for a specific stainless‑steel alloy, and to order the Tungaloy TPMT130308‑PM AH6225 directly through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6831594 Manufacturer SKU: TUN6831594 Label: TPMT130308‑PM AH6225 Facts Radius: 0.8 mm Geometry angle: 60° Relief (free) angle: 11° Plate thickness: 3.18 mm Size (inscribed circle): 13 mm Manufacturer article number: 6831594 Special features Material: carbide Coating: PVD Grade: AH6225 Chipbreaker: PM Plate shape: triangular Hole: cylindrical hole with single‑side countersink (40°–60°) Series: ISO turning inserts Application: turning (external and internal) System components: matching outer holder/boring bar, shim/clamping set, replacement screws Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TPMT130308‑PM AH6225 is formulated primarily for rostfreier Stahl (stainless steels); the AH6225 grade and PVD coating are optimised for such alloys and for conditions requiring a sharp, stable cutting edge. How does the PM chipbreaker influence performance? The PM chipbreaker supports medium cutting depths and promotes stable chip formation during turning, which helps to avoid entanglement and improves surface finish when machining stainless steels with the TPMT130308 insert. Which toolholders are compatible with this insert? Compatibility depends on matching the ISO form, clearance angle, tolerance class, clamping method, size and thickness; when those parameters align, the TPMT130308‑PM fits standard ISO external holders and boring bars. What is the benefit of the cylindrical hole with a countersink? The cylindrical hole with a single‑side countersink (40°–60°) enables secure clamping and consistent seating, reducing runout and ensuring repeatable positioning for the TPMT130308 family. Can this insert be used for internal turning? Yes, the geometry and size make the insert suitable for both external and internal turning applications, provided a compatible boring bar or internal holder is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 130308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6225 for consistent performance and a 0.8 mm nose radius for reliable surface finish; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TPMT130308 AH6225 – ISO turning insert, PVD-coated carbide, 11° relief (Tungaloy) TPMT130308-PSS AH6225 is an ISO‑standard indexable insert crafted for turning operations, offering a sharp yet stable cutting edge suitable for medium machining of rostfreier Stahl. PVD-coated carbide AH6225 grade Optimised for rostfreier Stahl turning 11° relief for controlled cutting action 0.8 mm nose radius, triangular form Consistent machining on rostfreier Stahl for dependable productivity The PVD-coated AH6225 grade delivers a balance between sharpness and edge stability, engineered specifically for turning rostfreier Stahl under varying conditions. The coating enhances wear resistance and thermal stability, which leads to more consistent cutting performance and fewer tool changes during medium-duty operations. This results in measurable improvements in cycle time and repeatable surface quality, making the insert suitable for batch production and mixed‑material workflows where process reliability is essential. ISO compatibility and secure clamping for straightforward tool integration Designed to the ISO model series, the insert fits standard external holders and boring bars when form, relief angle, tolerance class, fastening style, size and thickness match. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) to ensure secure clamping and repeatable positioning. The common system build—indexable insert, outer holder or boring bar, shim/clamping set and replacement screws—simplifies inventory and replacement logistics, reducing downtime and enabling predictable maintenance planning on the shop floor. Geometry that improves chip control and surface finish The triangular form with a 60° included angle and 11° relief provides a robust cutting edge for external and internal turning. The 0.8 mm nose radius supports a good compromise between strength and finish, while the PSS chipbreaker promotes effective chip formation for medium feeds. The 3.18 mm plate thickness and size 13 format contribute to stability under load, allowing higher metal removal rates with controlled vibrations. Taken together, the geometry and grade reduce the risk of edge chipping and help maintain consistent dimensional accuracy across production runs. For precision turning of rostfreier Stahl rely on Tungaloy’s AH6225 grade—contact Metav Werkzeuge for tailored application advice and to request cutting data: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829895 Manufacturer SKU: TUN6829895 Label: TPMT130308-PSS AH6225 Facts Insert designation: TPMT130308-PSS Grade: AH6225 Coating: PVD Material: Carbide Nose radius: 0.8 mm Relief angle: 11° Included angle: 60° Thickness: 3.18 mm Size: 13 Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features ISO turning indexable insert Triangular form Chipbreaker type: PSS Suited for rostfreier Stahl machining System: insert + outer holder/boring bar + shim/clamping set + spare screws FAQ What applications are best suited to this insert? The TPMT130308-PSS AH6225 insert is intended for external and internal turning, particularly effective on rostfreier Stahl where a balance of sharpness and edge stability is required. Which holders are compatible with the insert? Compatibility depends on form, relief, tolerance class, fastening method, size and thickness; the TPMT130308-PSS fits standard ISO holders sized for a 13-format triangular insert. How does the AH6225 grade improve tool life? The PVD coating and the AH6225 carbide formulation increase thermal and wear resistance, helping the insert maintain a stable cutting edge and extend life during medium machining of rostfreier Stahl. Is the insert suitable for fine finishing passes? With a 0.8 mm nose radius and the PSS chipbreaker, the insert supports good surface finishes at appropriate feeds, while retaining robustness for finishing operations. What is the manufacturer article number and SKU? Manufacturer article number 6829895; manufacturer SKU TUN6829895 for the TPMT130308-PSS AH6225 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH6235 PS Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a robust PS chipbreaker and secure clamping features for consistent machining of stainless steel; order directly via Metav Werkzeuge or consult the technical team for application advice. TPMT130308-PS AH6235 — ISO turning insert for turning applications (Tungaloy) The TPMT130308-PS AH6235 is an ISO-standard triangular turning insert engineered for turning operations, especially suited to stainless steel and interrupted cuts. PVD-coated carbide for tough materials Optimised PS chipbreaker for interrupted cuts 11° clearance angle reduces cutting forces Triangular ISO insert with secure centre hole Consistent cutting performance on stainless steel The PVD-coated carbide grade AH6235 offers a balance of toughness and wear resistance that is tailored to the demands of stainless steel and applications with elevated breakout risk. As a tougher grade, AH6235 extends edge life under interrupted cutting and when machining work-hardened surfaces; this leads to fewer insert changes and increased uptime. The PVD layer supports adhesion resistance at elevated temperatures while preserving substrate integrity for dependable performance. Exact fit and reliable clamping for process stability Designed to the ISO form 130308, the insert ensures predictable interfacing with ISO holders when the correct form, relief, tolerance class, fastening and thickness are matched. The triangular geometry combined with a cylindrical hole plus single-side countersink (40°–60°) provides secure axial and radial locating, improving repeatability and minimising chatter. Clear specification of size, thickness and tolerance allows planners to standardise holders and reduce fixture variation across production runs. Improved chip control and edge robustness The integrated PS chipbreaker shapes chip flow for safer evacuation during turning, lowering the risk of entanglement in interrupted cuts. A 0.8 mm corner radius reinforces the cutting edge against mechanical shock while the 11° clearance angle reduces rubbing and lowers cutting forces; this combination helps maintain surface finish and tool life under variable engagement depths. Operators gain stable cutting behaviour and reduced risk of premature edge chipping. System thinking for efficient tool management The insert functions as part of an ISO turning insert system: compatible holders, underlays or clamp sets and replacement screws complete the assembly. Selection of the chipbreaker and grade should be based on workpiece material, machining mode and machine rigidity to maximise economy and process safety. Documentation of matching holder specifications and tolerance checks supports predictable changeovers and simplifies inventory management across batch and series production. For recommendation and order support for Tungaloy inserts, contact Metav Werkzeuge — technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 to advise on holder matching and grade selection Technical Data Manufacturer item number: 6890206 SKU: 6890206-Tungaloy Manufacturer SKU: TUN6890206 Label: TPMT130308-PS AH6235 Model series: ISO turning inserts Application: turning Numbers / Core technical data Corner radius: 0.8 mm Lead/angle: 60° Clearance angle: 11° Thickness: 3.18 mm Insert size: 13 mm Designs / Special features Material: carbide Grade/coating: AH6235, PVD-coated Chipbreaker: PS Hole: cylindrical hole + single-side countersink (40°–60°) Shape: triangular Series: ISO-standard turning insert FAQ What materials is this insert designed for? The AH6235 grade is optimised for stainless steel and applications with increased breakout risk; the PVD-coated carbide substrate also performs across a wide range of steels when selected appropriately. How does the PS chipbreaker benefit interrupted cuts? The PS chipbreaker on the TPMT130308-PS AH6235 controls chip form and reduces chip snarling, which is particularly advantageous during interrupted cutting and variable engagement. Which holder characteristics must be matched for correct use? Compatibility requires matching form, relief (11°), tolerance class, fastening, size (13 mm) and thickness (3.18 mm); correct matching ensures secure clamping and repeatable results. Can the insert be used for internal turning as well as external turning? Yes, the ISO geometry and triangular form permit both external and internal turning when paired with the appropriate holder and toolpost configuration. What indicates the difference of the AH6235 grade? AH6235 is a tougher PVD-coated carbide grade offering enhanced edge resistance for stainless steel and applications prone to edge breakout, prioritising process security and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH6235 Wendeplatten - Tungaloy
High-performance PVD-coated carbide AH6235 combined with a 0.8 mm corner radius and an 11° clearance ensures reliable performance in turning operations, including interrupted cuts and rostfreier Stahl. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal chipbreaker selection. TPMT 130308 AH6235 — Turning insert (ISO) by Tungaloy A TPMT 130308 AH6235 ISO-standard triangular indexable insert for external and internal turning, designed for rostfreier Stahl and applications with elevated breakout risk. PVD-coated carbide grade AH6235 11° clearance angle for stable cutting Triangular 13 mm insert with 0.8 mm radius Countersunk cylindrical hole for secure mounting Maximise cutting reliability with the right grade and geometry The combination of a PVD-coated carbide substrate and the AH6235 grade provides an enhanced edge integrity designed specifically for demanding turning tasks such as interrupted cuts and machining of rostfreier Stahl. The PVD layer reduces built-up edge and improves wear resistance, while the 0.8 mm corner radius helps to distribute cutting forces and reduce the tendency for chipping during unstable cuts. With a plate thickness of 3.18 mm and a nominal size of 13 mm, this triangular insert balances stiffness and accessibility for both external and internal turning operations. The result is a measurable improvement in process stability and more consistent component finishes. Easy integration into ISO systems and choice guidance for applications As an ISO-standard indexable insert, the part integrates with compatible external holders or boring bars; compatibility is governed by insert form, clearance, tolerance class, fixing, size and thickness. The PM chipbreaker suits a range of turning strategies and should be selected according to workpiece rigidity and cutting conditions. For users uncertain about holder matching or chipbreaker selection, guidance is available to ensure the insert functions as part of a complete tooling system—including shim/clamp sets and replacement screws—so that tool changeover remains efficient and predictable. Practical benefits: mounting, maintenance and predictable results The triangular form offers three usable cutting edges, allowing cost-effective indexing. The cylindrical hole with a single-sided countersink (40°–60°) secures the insert reliably in many ISO clamping systems and supports repeatable seating. With a nominal included angle of 60° and an 11° clearance angle, the geometry reduces rubbing and helps maintain cutting-edge integrity across production runs. Backed by Tungaloy manufacturing standards, this insert offers stable chip formation and long tool life, supporting productive turning with consistent outcomes. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy TPMT 130308 AH6235 insert or to request tailored holder compatibility advice. Technical Data Article number: 6890213 SKU: 6890213-Tungaloy Manufacturer SKU: TUN6890213 Model series: ISO turning indexable inserts Grade / coating: AH6235 / PVD Material: carbide Chipbreaker: PM Application: Turning Dimensions & core data Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole + single-sided countersink (40°–60°) Design & features Triangular insert (three cutting edges) ISO-standardised indexable plate PVD-coated carbide grade AH6235 Suitable for rostfreier Stahl and interrupted cuts System requires suitable holder, shim/clamp set and screws Secure mounting via countersunk cylindrical hole FAQ Which materials is this insert suited for? The TPMT130308-PM AH6235 indexable turning insert from Tungaloy is optimised for rostfreier Stahl and is well suited to interrupted cutting where edge robustness is required. How many usable cutting edges does the insert provide? The triangular shape gives three cutting edges per indexable insert; the TPMT130308-PM AH6235 allows cost-effective re-indexing to prolong tool life. What chipbreaker is fitted and when should it be chosen? This insert features a PM chipbreaker; select the PM variant for a balance of chip control and adaptability to varying workpiece stability during turning. How is the insert secured in the holder? The TPMT130308-PM AH6235 uses a cylindrical hole with a single-sided countersink (40°–60°) for positive seating in compatible ISO clamping systems; compatibility depends on insert form, clearance and tolerance class. What are the article number and SKU for ordering? Article number 6890213, SKU 6890213-Tungaloy; the Tungaloy TPMT130308-PM AH6235 is listed under these identifiers for procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade (AH6235) offering enhanced resistance to chipping, combined with a 0.8 mm corner radius and ISO form for reliable turning operations; order directly via Metav Werkzeuge or consult our advisors for optimisation and rapid delivery. TPMT 130308 AH6235 triangular turning insert — PVD-coated carbide, 0.8 mm corner radius (Tungaloy) TPMT130308-PSS AH6235 is a triangular ISO turning insert designed for external and internal turning, optimised for stainless steels and interrupted cuts. PVD-coated AH6235 grade for stainless steel Triangular shape for stable seating Cylindrical hole + 40°–60° countersink 0.8 mm corner radius for general turning Precision and predictable performance for stainless-steel turning The PVD-coated carbide specification delivers a tougher cutting edge that better resists chipping in interrupted cuts and on difficult-to-machine, stainless steels. The insert’s ISO geometry and triangular form provide consistent seating and repeatable indexation, which reduces set-up time and supports stable machining cycles. By choosing this grade, process planners gain a combination of edge robustness and dimensional predictability that lowers scrap risk during series turning. Compatibility and setup explained for efficient tool selection Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; the plate thickness of 3.18 mm and the standard 60° included angle make the insert suitable for many ISO triangular holders. The insert’s 11° relief angle improves clearance and reduces rubbing on the flank, helping to maintain surface finish even under variable cutting conditions. Selecting the correct chipbreaker (PSS) and grade (AH6235) ensures effective chip control and longer edge life in intermittent cuts. Practical benefits: productivity, repeatability and reduced downtime A consistent corner radius of 0.8 mm provides a balance between edge strength and profile accuracy, allowing for stable feed rates and predictable tool life. The combination of the PVD-coated carbide and a purpose-designed chipbreaker reduces the incidence of built-up edge and unexpected edge failure, which in turn supports higher uptime and fewer tool changes. For production environments aiming to improve throughput without compromising part quality, this insert offers a pragmatic route to more reliable turning cycles. For applications that demand reliable stainless-steel performance, contact Metav Werkzeuge for expert guidance on the Tungaloy AH6235 grade and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903506 Manufacturer SKU: TUN6903506 Brand SKU: 6903506-Tungaloy Material: carbide Model series: ISO turning indexable inserts ISO designation: TPMT130308-PSS AH6235 Facts Thickness: 3.18 mm Inscribed circle / size: 13 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Special features PVD coating Grade: AH6235 (tougher grade for stainless steels and interrupted cuts) Chipbreaker: PSS Shape: triangular Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert intended for? The TPMT130308-PSS AH6235 insert is specified for stainless steels and is particularly effective in interrupted cuts or situations with higher chipping risk. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, fastening, size and thickness; the ISO geometry of this insert matches standard triangular turning holders designed for 13 mm inscribed circle plates. How does the AH6235 grade affect tool life? The AH6235 PVD-coated carbide grade offers improved resistance to chipping and wear in demanding stainless-steel turning, which typically extends effective tool life and reduces unscheduled changes. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and profile accuracy, enabling stable feeds and improved surface finish while limiting vulnerability to edge breakouts. Is this insert suitable for finishing operations? With the PSS chipbreaker and the specified geometry, the insert can be used for general turning; for high-precision finishing, cutter and parameter selection should be matched to the desired surface tolerance and feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines process security and versatility for mixed steels and stainless steels; the robust 60° triangle geometry with a 0.8 mm corner radius ensures repeatable edge life and stable cutting forces. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TPMT 130308 AH725 Turning insert (ISO TPMT130308-PSS, PVD carbide) — Tungaloy The TPMT130308-PSS AH725 is an ISO‑standard triangular indexable insert for external and internal turning, engineered for universal performance with steels and stainless steels. PVD-coated universal grade AH725 60° triangular geometry for general turning ISO compatibility via form, clearance and size 0.8 mm corner radius for robust cutting edge Consistent machining across varied steels The PVD‑coated AH725 grade is a carbide formulation designed for predictable wear behaviour when machining carbon steels and stainless steels. The coating improves heat resistance and adhesion while reducing built-up edge, which translates into longer tool life and fewer interruptions. For shops facing frequent material changes, this indexable insert offers a balance between wear resistance and toughness that helps maintain cycle times and surface finish without specialist parameter tuning. Secure seating and compatibility for fast tool changes Compatibility with conventional toolholders is determined by the insert’s shape, 11° relief (facing) angle, tolerance class, clamping method and thickness. The triangular format with a central hole and a single‑side countersink (40°–60°) enables reliable indexation on ISO‑type holders and boring bars, permitting quick insert changes and minimising downtime. Clear information on form and tolerance supports correct selection of the matching carrier, reducing setup error and maintaining repeatability in serial production. Edge geometry that stabilises the process A 60° wedge angle combined with a 0.8 mm corner radius produces a strong cutting edge that resists chipping under interrupted cuts and light roughing operations. The PSS chipbreaker geometry is intended to control swarf and promote stable chip flow for the specified material range; this reduces vibration and contributes to better surface quality. For operators less familiar with chipbreaker behaviour, the insert’s shape and radius provide an inherently forgiving cutting response that simplifies feed and speed choices. Practical selection guidance and economic benefits Choosing the correct chipbreaker and grade depends on workpiece material, rigidity of the setup and required surface finish. In many mixed‑material production scenarios, the universal AH725 grade reduces inventory complexity by covering a broad spectrum of steels and stainless steels while offering dependable edge life. The combination of a PVD coating and a robust geometry supports consistent parts output and fewer tool changes, yielding measurable time savings in batch production and higher overall process productivity. For advice on integrating Tungaloy AH725 inserts into existing turning processes or to secure stock, contact Metav Werkzeuge for a tailored recommendation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6865202 Manufacturer SKU: TUN6865202 SKU: 6865202-Tungaloy Brand: Tungaloy Facts Shape: triangular ISO code: 130308 Corner radius: 0.8 mm Relief angle: 11° Insert thickness: 3.18 mm Inscribed circle / size: 13 Lead angle: 60° Special features Grade / coating: AH725, PVD‑coated cemented carbide Chipbreaker: PSS Hole style: with hole; cylindrical hole + single‑side countersink (40°–60°) Typical applications: external and internal turning System components: ISO insert, matching outer holder or boring bar, clamp/washer and replacement screws FAQ What materials is this insert suited for? The TPMT130308‑PSS AH725 insert is designed primarily for a wide range of steels and stainless steels, offering a universal balance of toughness and wear resistance. How does the PSS chipbreaker affect cutting performance? The PSS chipbreaker promotes controlled chip formation and evacuation; with the AH725 grade it helps reduce vibration and improve surface finish during general turning. Is the insert compatible with standard ISO toolholders? Yes; the insert follows ISO dimensions (130308) and is compatible with ISO‑type holders when matched by form, clearance angle, tolerance class and clamping arrangement. What does the 0.8 mm corner radius mean for operation? A 0.8 mm corner radius strengthens the cutting edge against chipping and is suited to stable roughing and finishing passes where a balance of edge life and surface quality is required. Can the AH725 grade reduce tool inventory complexity? Because AH725 is a universal, fracture‑resistant grade for steels and stainless steels, it often allows consolidation of grades across varying workpiece materials, simplifying stock and selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725 for reliable cutting, a 60° triangular geometry with 0.8 mm nose radius for precise finishes, and clear ISO compatibility for straightforward tool mounting. Order the TPMT130308-PM AH725 directly via Metav Werkzeuge or ask our consultants if needed. TPMT130308-PM AH725 — ISO turning insert, triangular 60°, PVD-coated (Tungaloy) The TPMT130308-PM AH725 is an ISO-standard turning insert designed for external and internal turning, optimised for steel and rostfreier Stahl applications. ISO triangular insert 60° geometry PVD-coated carbide grade AH725 0.8 mm nose radius for precise finishing Cylindrical hole with 40°–60° countersink Stable productivity for demanding turning tasks The insert's PVD-coated carbide composition and the AH725 grade deliver a balance of wear resistance and fracture toughness that supports consistent cycle times. Designed as a universal, fracture-resistant grade for Stahl and rostfreier Stahl, this specification reduces unexpected tool failures and minimises interruptions. In practice, that means more predictable machining windows and fewer unplanned indexings, which contributes directly to improved throughput and lower process variation in batch production. Reliable surface quality with economical tool life With a 0.8 mm nose radius and a 60° triangular geometry, the insert provides a good compromise between edge strength and fine surface finish. The 11° relief angle reduces rubbing on the flank, while the PM chipbreaker promotes controlled chip formation when turning a range of materials. For shops processing mixed batches, the combination of edge geometry and chip control means fewer tool changes and more consistent part quality, translating into both time savings and reduced rework. ISO compatibility for straightforward integration The insert follows ISO standards for indexable turning plates; compatibility with holders is determined by form, relief angle, tolerance class, fastening, size and thickness. The plate thickness of 3.18 mm and plate size 13 mm match common external holders, and the cylindrical hole with single-side countersink (40°–60°) ensures secure clamping. The recommended system build includes the ISO insert, a matching external holder or boring bar, a backing/clamping set and spare screws, enabling quick integration into existing tool systems with minimal adjustments. Practical advantages for workshop decision-making Choosing this insert supports flexible machining strategies: it performs well on both roughing and finishing operations when matched with appropriate cutting parameters and workpiece stability. The PVD coating provides thermal protection at higher cutting speeds, making it suitable for many general turning tasks. For engineers and buyers, the clear specification of geometry, coating and grade simplifies cost-benefit assessments and helps to standardise tooling across multiple machines and operators. Contact Metav Werkzeuge for application advice or to discuss suitable holders and cutting parameters for the TPMT130308-PM AH725; email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant at Metav Werkzeuge Technical data Article number: 6856729 Manufacturer SKU: TUN6856729 SKU: 6856729-Tungaloy Designation: TPMT130308-PM AH725 Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 13 mm Special features Material: carbide Coating/grade: AH725 (PVD) Chipbreaker: PM Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Plate form: triangular Application: Turning — external and internal turning System components: ISO insert, matching holder or boring bar, backing/clamping set, spare screws FAQ What materials is this insert suitable for? The TPMT130308-PM AH725 is specified for machining Stahl and rostfreier Stahl and performs well across a broad range of common turning materials when paired with the correct cutting data. Which chipbreaker is fitted and what does it do? The insert uses a PM chipbreaker; this promotes controlled chip formation and improves process reliability during both roughing and finishing cuts. How does the AH725 grade influence tool life? AH725 is a PVD-coated, fracture-resistant carbide grade that balances wear resistance and toughness to provide reliable tool life under varying workpiece conditions. Is the insert compatible with standard ISO holders? Yes. The TPMT130308-PM follows ISO plate dimensions; compatibility depends on form, relief, tolerance class, fastening method, plate size and thickness—ensure the holder matches these parameters. What are the mounting details for secure clamping? The insert has a cylindrical hole with a single-side countersink (40°–60°) for stable fastening; use the correct backing/clamping set and replacement screws as part of the system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com