TPMT 110308 T9225 Wendeplatten - Tungaloy
Benefit from a CVD-coated cemented carbide grade (T9225) that combines toughness for medium-to-heavy steel turning with a PS chipbreaker for consistent chip control; the triangular ISO format and 0.8 mm corner radius ensure secure clamping and reliable edge life. Order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. TPMT 110308 T9225 turning insert (CVD-coated carbide, PS chipbreaker) — Tungaloy The TPMT110308-PS T9225 is an ISO-standard triangular indexable insert designed for turning operations, offering a robust universal grade for medium-to-heavy steel machining. CVD-coated cemented carbide T9225 Robust PS chipbreaker for secure chip control ISO-standard triangular shape, with hole 0.8 mm corner radius for strong cutting edge High-performance grade for demanding steel turning The combination of a CVD-coated finish and cemented carbide substrate in grade T9225 provides a balance of hardness and toughness suited to medium-to-heavy steel machining. This makes the insert particularly effective when cutting conditions vary or when slightly interrupted cuts occur. The PS chipbreaker promotes controlled chip formation, reducing cycle interruptions and helping to maintain consistent surface quality. Compatibility with ISO toolholders ensures straightforward integration into established turning systems, while the insert’s construction is designed to support productive, cost-effective turning cycles. Geometry that improves stability and edge life A triangular insert shape with an inscribed circle of 11 mm, a 0.8 mm corner radius and a 3.18 mm plate thickness gives a compact but robust cutting geometry. The 60° included angle and 11° relief angle distribute cutting forces and reduce the risk of premature edge failure under heavier engagement. The insert’s cylindrical hole with a single-sided countersink (40°–60°) enables secure clamping and quick indexing, while the specific radii and thickness contribute to repeatable mounting accuracy. These features translate into longer uninterrupted runs and fewer tool changes in serial production. System-level benefits and recommended setup This ISO insert is intended to be used as part of a system: matching external holders or boring bars, a suitable shim/clamping set and the correct replacement screws are essential for performance. The grade’s universality simplifies tool inventory, permitting a single insert variant to cover a wide range of steel applications. Selecting the correct chipbreaker and grade according to workpiece material and stability will improve tool life and process reliability. For complex setups or when substituting another grade, technical consultation is advisable to confirm holder geometry and clamping parameters. For precise holder matching and availability of the Tungaloy TPMT110308-PS T9225, contact Metav Werkzeuge for expert advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781037 Manufacturer SKU: TUN6781037 Label: TPMT110308-PS T9225 Model series: ISO turning inserts Material: cemented carbide Numbers / core technical data Corner radius: 0.8 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Relief angle: 11° Included angle: 60° ISO code: 110308 Special features / variants CVD-coated cemented carbide, grade T9225 PS chipbreaker for controlled chips Triangular shape (three cutting edges) With cylindrical hole and single-sided countersink (40°–60°) Compatible with ISO-standard turning holders FAQ What materials is this insert suitable for? The TPMT110308-PS T9225 insert from Tungaloy is engineered mainly for medium-to-heavy steel machining; the CVD-coated cemented carbide composition offers toughness for variable and slightly interrupted cuts. How is holder compatibility determined for this insert? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standard triangular format of the TPMT110308-PS facilitates use in matching external holders or boring bars. Which geometry specifications are most relevant for process planning? Key figures are a 0.8 mm corner radius, 3.18 mm plate thickness, 11 mm inscribed circle, 11° relief angle and a 60° included angle, plus the cylindrical hole with single-sided countersink for secure clamping. What benefits does the PS chipbreaker provide? The PS chipbreaker delivers stable chip formation and evacuation during steel turning, reducing re-cutting and improving surface finish while supporting uninterrupted productivity. Is the insert easy to index and replace during production? Yes; the triangular shape provides three cutting edges per indexable insert and the hole/countersink design ensures secure, repeatable clamping, enabling rapid indexing and minimal downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated T9225 grade and a TM chipbreaker for stable chip control and reliable performance in medium-to-heavy steel turning. The geometry and ISO compliance reduce set-up time and ensure compatibility with standard triangular holders. Order the TPMT 110308 T9225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT 110308 T9225 turning indexable insert by Tungaloy TPMT 110308 T9225 is an ISO‑standard triangular turning insert designed for robust medium‑to‑heavy steel machining applications CVD-coated carbide grade T9225 Robust for medium-to-heavy steel turning Triangle insert, 11 mm, R0.8 11° relief with 60° included angle Durable grade for demanding steel operations The insert uses a CVD-coated carbide substrate designated T9225, a robust universal grade developed for medium‑to‑heavy steel turning where varying engagement and slightly interrupted cuts demand additional toughness. The coating improves wear resistance while the substrate maintains edge stability under fluctuating loads. As a result, the cutting edge delivers consistent performance across batch runs and mixed lot production, reducing scrap and improving predictability in machining cycles. ISO conformity for straightforward integration and setup Designed to the ISO model series for indexable turning plates, the geometry ensures compatibility based on form, 11° relief, tolerance class, clamping and plate thickness. The triangular shape with a 60° included angle, 11 mm inscribed circle and 3.18 mm thickness provides a clear interface with standard triangular holders. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) simplifies clamping and orientation, shortening set‑up times and lowering the risk of incorrect mounting. This structured compatibility supports efficient tool management on the shop floor. Operational advantages that protect uptime and budgets Using an indexable system with this grade and TM chipbreaker reduces tool change frequency and machine downtime, yielding measurable productivity gains. The combination of a tougher substrate and a protective CVD coating delivers longer tool life under interrupted cuts and mixed cutting conditions, which improves process stability and lowers overall machining cost per part. Stable chip formation and reliable edge retention also cut rework and contribute to a more predictable production throughput. Guidance on selecting chipbreakers and holders The TM chipbreaker is matched to moderate to heavy steel operations where controlled chip segmentation is required; it aids evacuation and prevents tangling in long turning passes. Selection of the correct holder should focus on matching the insert form, free angle and clamping style to the ISO designation to preserve cutting geometry and ensure safe fixation. When in doubt, choose holders rated for triangular inserts with a 60° seating angle and confirm tolerance class to achieve repeatable results. For application-specific advice on holder selection, cutting data and the best chipbreaker match for the Tungaloy TPMT 110308 T9225, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt, technical guidance. Technical data Article number: 6781495 Manufacturer SKU: TUN6781495 Metav SKU: 6781495-Tungaloy Item designation: TPMT110308-TM T9225 Numeric data Corner radius: 0.8 mm Inscribed circle: 11 mm Plate thickness: 3.18 mm Relief angle: 11° Included angle: 60° Materials & features Material: carbide Coating/grade: T9225 (CVD-coated) Chipbreaker: TM Shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) FAQ Which materials is this insert best suited for? The Tungaloy TPMT 110308 T9225 insert is intended primarily for medium‑to‑heavy steel machining and performs well with variable engagement and slightly interrupted cuts thanks to its robust T9225 grade. What advantage does the TM chipbreaker offer? The TM chipbreaker promotes controlled chip segmentation and reliable evacuation in steel turning, improving surface finish consistency and reducing the risk of chip recontamination. How is compatibility with holders determined? Compatibility depends on the insert form, free angle, tolerance class, clamping method, size and thickness; the triangular 60° geometry and 11 mm inscribed circle require matching triangular holders with corresponding seating and clamping. Can this insert be used for internal turning operations? Yes — the ISO‑compliant geometry supports both external and internal turning when the correct holder and clamping arrangement are used. What identifiers should be quoted when ordering? Quote article number 6781495, manufacturer SKU TUN6781495 and Metav SKU 6781495-Tungaloy to ensure the correct TPMT110308-TM T9225 item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9225, a 60° triangular geometry and a secure central mounting to ensure stable performance in medium to heavy Stahl turning; order directly via Metav Werkzeuge or ask the technical team for application advice. TPMT 110308 T9225 — ISO turning insert TPMT110308-PSS for turning (60°) by Tungaloy The TPMT110308-PSS T9225 is an ISO‑standard triangular turning insert designed for robust external and internal turning, combining a 60° geometry with a 0.8 mm corner radius and a central hole with a 40°–60° countersink for secure clamping. ISO‑standard triangular insert, 60° geometry CVD-coated carbide grade T9225 for robustness 0.8 mm corner radius for stable edge life Central hole with 40°–60° countersink Consistent compatibility and predictable toolholder fit for production use As an ISO-normed insert, the triangular geometry and defined dimensions enable predictable mounting and repeatable set‑up. The insert’s fit to the toolholder is governed by form, 11° clearance, tolerance class, fastening method, size and 3.18 mm thickness, so selection of the matching external holder or boring bar is straightforward. This standardisation reduces set‑up time and supports high process reliability in serial production, while the central hole design facilitates consistent clamping and repeatable seating under varying cutting conditions. Robust grade and coating for interrupted cuts and heavy engagement The T9225 grade is a CVD‑coated carbide developed as a universal, tough grade for medium to heavy Stahl machining where varying engagement or lightly interrupted cuts demand extra toughness. The coating provides improved wear resistance and thermal stability, while the substrate carbide offers fracture resistance; together they extend effective tool life and enable higher average productivity. The integrated PSS chipbreaker assists in controlled chip formation, which contributes to safer operation and fewer process interruptions on demanding components. Designed for flexible turning applications and simple system setup Intended for both external and internal turning, the insert is part of a compact system comprising the indexable plate, a suitable external holder or boring bar, a shim/clamping set and replacement screws. The triangular shape with an 0.8 mm corner radius delivers a balance between strength and edge sharpness for finishing and medium roughing, while the central cylindrical hole with a one‑sided countersink (40°–60°) ensures secure fastening. Selection of the correct chipbreaker and grade should be matched to the workpiece material, machining strategy and machine stability to optimise cycle time and surface quality. Choose Tungaloy’s TPMT110308-PSS T9225 for stable, productive Stahl turning and contact Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781002 Manufacturer SKU: TUN6781002 SKU: 6781002-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Geometry angle: 60° Clearance angle: 11° Thickness: 3.18 mm Insert size: 11 mm Special features Material: carbide Coating: T9225 (CVD) Chipbreaker: PSS Shape: triangular Central hole: with cylindrical hole and one-sided countersink (40°–60°) Application: external and internal turning Suitable for: medium to heavy Stahl machining System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The Tungaloy TPMT110308-PSS T9225 is specified for medium to heavy Stahl machining and is designed to perform reliably under varying engagement and lightly interrupted cut conditions. How does the T9225 coating benefit machining performance? The CVD‑coated T9225 provides enhanced wear resistance and thermal stability while the carbide substrate maintains toughness, together improving tool life and process stability for the insert. Which chipbreaker is supplied with the insert and what does it do? This insert uses the PSS chipbreaker, which is optimised for controlled chip formation in turning operations, aiding safer chip evacuation and steady surface finish. How should the insert be mounted in the toolholder? Mounting depends on matching the insert form, 11° clearance, tolerance class, fastening type, size and 3.18 mm thickness to the corresponding holder; the central hole with countersink ensures secure clamping when the holder is correctly specified. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and a precise 0.8 mm nose radius for reliable medium to heavy steel turning; combine secure clamping via the cylindrical hole and single-sided countersink with ISO compatibility for predictable tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TPMT 110308 T9225 — TPMT 110308 ISO turning insert for medium to heavy steel machining (Tungaloy) TPMT110308-PM T9225 is an ISO-format triangular turning insert designed for versatile external and internal turning operations in changed engagement conditions, offering a PM chipbreaker and a robust CVD-coated carbide grade for demanding steel work. CVD-coated carbide for high wear resistance Robust universal grade for medium to heavy steel 0.8 mm nose radius for consistent profile control Triangular 11° clearance with cylindrical hole Increased productivity with a wear-resistant universal grade The combination of a CVD-coated carbide substrate and the T9225 grade delivers a balance of toughness and wear resistance tailored to medium to heavy steel turning. This composition supports longer tool life under variable cutting conditions and when light interruptions occur in the cut. The result is fewer index changes and more stable machining cycles, which translates into improved process efficiency and predictable component quality. The PM-style chipbreaker enhances chip control across a range of feeds, reducing downtime for chip evacuation and contributing to a smoother production flow. Clear guidance on compatibility and clamping for dependable results Compatibility with holders is determined by insert form, 11° clearance, tolerance class, attachment method, size and thickness. The triangular ISO 110308 form and the cylindrical hole with a single-sided countersink (40°–60°) make the insert suitable for conventional clamp-style or top-clamp toolholders designed for this geometry. Correct seat fit and torque of the clamping screw ensure repeatable seating and consistent cutting geometry; improper seating can affect cutting forces and finish. Specifying the matching holder by form and size prevents misfits and secures reliable performance in serial production. Geometry engineered for precision and strength in turning A 0.8 mm nose radius offers a practical compromise between finish quality and edge strength: it supports dimensional control on turned profiles while maintaining resistance to chipping in interrupted cuts. The triangular plate with a 60° included angle provides three usable cutting edges, optimising tool cost per edge. For operations requiring more aggressive material removal, the insert’s geometry and robust grade allow a move towards heavier depths of cut without immediate loss of edge integrity, whereas trimmed feeds retain form accuracy for finishing operations. Practical recommendations for workshop implementation Select feeds and speeds in line with the T9225 grade’s focus on steel machining and consider the PM chipbreaker for a broad feed window where chip control is essential. Monitor wear patterns rather than relying solely on runtime: flank wear, edge chipping and built-up edge are indicators for indexing or replacement. Keep spare screws and clamping parts on hand to avoid extended downtime. For applications with highly interrupted cuts or unstable setups, the robustness of the CVD-coated carbide grade supports better resistance to mechanical shock, improving uptime and process reliability. Contact Metav Werkzeuge for tailored machining parameters and compatibility checks for the Tungaloy TPMT110308-PM T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and rapid supply arrangements Technical data Article number: 6781217 SKU: 6781217-Tungaloy Manufacturer SKU: TUN6781217 Facts Insert designation: ISO 110308 Nose radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 11 Included angle: 60° Clearance angle: 11° Special features Material: carbide Coating: CVD-coated Grade: T9225 (robust universal for steel) Chipbreaker: PM Plate shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) FAQ What is the primary application for this insert? The TPMT110308-PM T9225 is designed primarily for turning operations, suited to external and internal turning of steel where a robust, universal grade is required. How does the T9225 grade affect machining performance? The T9225 grade offers a balance of toughness and wear resistance for medium to heavy steel machining; the grade supports stable cutting under variable engagement and helps extend edge life. What does the PM chipbreaker provide in practice? The PM chipbreaker ensures controllable chip formation across a wide feed range, improving evacuation and reducing the risk of entanglement in manual and automated setups. Which clamping method is required for secure seating? The insert uses a cylindrical hole with a single-sided countersink and is secured by compatible clamp or top-clamp holders designed for ISO 110308 geometry; correct torque and seat cleanliness are essential for repeatability. Is the insert suitable for interrupted cuts? Yes. The combination of CVD-coated carbide and the robust T9225 grade improves resistance to chipping, making the insert appropriate for applications with minor interruptions or varying engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130302 AH725 PS Wendeplatten - Tungaloy
Take advantage of the combination of high process security, universal cutting performance and precise geometry for consistent turning results; order the insert directly via Metav Werkzeuge or consult our technical advisers for selection and system matching. TPMT130302-PS AH725 — Indexable turning insert, PVD-coated carbide, 0.2 mm corner radius (Tungaloy) TPMT130302-PS AH725 is an ISO-indexable turning insert designed for external and internal turning, offering a universal, breakage-resistant grade optimised for mixed-material production. *ISO TPMT130302 triangular form *PVD-coated AH725 carbide grade *0.2 mm corner radius for precision *Suitable for steel and stainless steel Stable cutting on mixed steels for fewer interruptions The AH725 grade is a PVD-coated carbide developed as a universal, breakage-resistant solution for applications where the workpiece material varies between steel and stainless steel. Its chemistry and coating promote stable chip formation, reducing the risk of unexpected breakouts during shorter and smaller-tool operations. For production environments with frequent material changes, the insert helps maintain cycle times and reduces scrap rates by delivering consistent edge behaviour and longer usable life compared with untreated grades. Geometry that delivers repeatable accuracy and secure clamping The triangular insert features a 0.2 mm corner radius and an 11° relief angle, dimensions that support accurate dimensional control at the cutting edge while allowing controlled chip flow. The insert thickness of 3.18 mm and an inscribed circle of 13 mm combine with the cylindrical hole plus one-sided countersink (40°–60°) to ensure firm seating in the holder and predictable repeatability after index changes. These geometric details translate into fewer setup adjustments and a straightforward way to achieve target tolerances in series turning operations. System compatibility and practical workshop advantages As part of an ISO-indexable system, the insert functions within a straightforward assembly: matching external holder or boring bar, a suitable shim or clamp set, and replacement screws. Compatibility is determined by form, relief, tolerance class, fastening method, size and thickness; selecting the correct chipbreaker (PS) and grade supports process security and surface finish. For typical external and internal turning tasks the insert integrates easily into existing tool inventories, offering a balance of performance and flexibility for production and job-shop settings. Contact Metav Werkzeuge for application advice, availability and help choosing the right holder and chipbreaker for the Tungaloy TPMT130302-PS AH725 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6856680 Manufacturer SKU: TUN6856680 SKU: 6856680-Tungaloy Model series: ISO indexable turning inserts Core data ISO designation: TPMT130302-PS Thickness: 3.18 mm Inscribed circle: 13 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Hole: with cylindrical hole and single-sided countersink (40°–60°) Design and special features Material: carbide Coating: PVD (AH725) Chipbreaker: PS Shape: triangular Application: turning (external and internal) Compatibility: ISO holders, shims and clamp sets FAQ What materials is this insert suitable for? The Tungaloy TPMT130302-PS AH725 insert is formulated for steel and stainless steel, offering universal performance across mixed-material production. Which chipbreaker is supplied and when should it be chosen? The insert features the PS chipbreaker; select this chipformer for stable chip control in general turning and where process security is a priority. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a compromise between edge strength and fine surface finish, allowing precise dimensional control for finishing and light semi-finishing passes. Is this insert compatible with all ISO triangular holders? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation TPMT130302-PS indicates the standard form to match with appropriate holders. Which components are required to build a complete tool assembly? A complete system comprises the insert, a matching external holder or boring bar, a shim/underlayer or clamp set and the correct fastening screw for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130302 AT9530 PS Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet grade AT9530 for superior surface quality, a precise 0.2 mm corner radius for fine finishing, and ISO-compatible geometry for reliable seating in standard turning holders — order the insert directly via Metav Werkzeuge or consult our specialists for fitment and process optimisation. TPMT 130302 AT9530 ISO turning insert by Tungaloy — coated cermet for finishing TPMT130302-PS AT9530 is a triangular ISO turning insert designed for finishing and light turning of steel components, offering a balanced mix of surface quality and predictable wear. Coated cermet grade AT9530 Triangle form with 60° included angle 0.2 mm corner radius for fine finish ISO-compatible seating and hole design Consistent surface quality from a coated cermet grade The coated cermet composition AT9530 is engineered specifically for finishing and light machining of steel, delivering a consistent surface finish and reliable wear behaviour. Cermet inserts combine ceramic and metallic properties to resist abrasive wear while producing a finer cutting edge than many conventional carbides, which helps to reduce roughness at low feed rates. For applications where surface integrity and dimensional stability matter, this insert offers controlled performance across a range of finishing cuts. Precision geometry that ensures repeatable seating and accuracy A triangular form with a 60° included angle provides stable support in standard ISO holders, while the 0.2 mm corner radius reduces edge chipping when producing fine radii or controlled chamfers. The insert’s 3.18 mm thickness and the standard ISO profile enable predictable clamping force and repeatable positioning, which translates into consistent part-to-part accuracy and less rework in series production. Compatibility is determined by form, relief angle, tolerance class, attachment and thickness — select a matching external holder or boring bar for optimal results. Process benefits from a dedicated chipbreaker and application focus The integrated PS chipbreaker is tuned for finishing operations: it promotes favourable chip control at lower material removal rates and helps maintain a stable cutting zone, especially on longer or less rigid set-ups. For best results, match the chipbreaker and AT9530 grade to the workpiece stability and the specific steel grade; in one-pass finishing or light-duty profiling, the combination reduces vibration and improves surface appearance. Technical note: chipbreaker geometry affects chip curl and evacuation — "PS" indicates a profile suited to low-to-moderate feeds common in finishing cycles. Installation features and economical tool life The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), enabling secure clamping and straightforward replacement. The hole-and-countersink arrangement reduces rotation risk under cutting forces and simplifies tool setup on compatible holders. Made from high-quality carbide substrate and finished with a cermet coating, the insert supports predictable tool life in finishing tasks, lowering the frequency of index changes and contributing to process economy without compromising surface quality. For precise finishing operations with Tungaloy’s coated cermet technology, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability, holder compatibility and application-specific recommendations Technical Data Article number: 6773751 SKU: 6773751-Tungaloy Manufacturer SKU: TUN6773751 Model series: ISO turning inserts Designation: TPMT130302-PS Facts Inscribed circle: 13 mm Thickness: 3.18 mm Corner radius: 0.2 mm Included angle: 60° Relief angle (free angle): 11° Countersink angle: 40°–60° Special features Coated cermet grade AT9530 PS chipbreaker for finishing Triangular insert form With cylindrical hole and single-sided countersink Material: carbide Intended application: turning; finishing and light machining of steel FAQ What materials is this insert best suited for? The TPMT130302-PS AT9530 insert is optimised for finishing and light machining of steel; the AT9530 coated cermet provides good surface quality and even wear when used on typical steel grades. Which holder type is compatible with the TPMT130302-PS insert? Compatibility is determined by ISO form, relief angle, tolerance class, attachment method, size and thickness; the triangular ISO profile and the hole with single-sided countersink fit standard triangular turning holders and compatible boring bars. How does the PS chipbreaker affect cutting? The PS chipbreaker promotes controlled chip formation at finishing feeds, improving chip evacuation and reducing edge vibration, which supports a finer surface finish during light cuts. What does the 0.2 mm corner radius mean for final parts? The 0.2 mm corner radius provides a small, robust cutting edge that helps achieve a smooth machined edge with reduced risk of visible tool marks, suitable for fine finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130302 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a coated cermet grade (GT9530) for superior wear resistance and a precise ISO triangular geometry with a 60° approach angle and 0.2 mm corner radius for consistent finishing results; order genuine stock through Metav Werkzeuge or request advice from our tooling consultants. TPMT 130302 GT9530 ISO turning insert (triangular, PS chipbreaker) by Tungaloy TPMT 130302 GT9530 is an ISO triangular turning insert designed for external and internal turning, offering a wear‑resistant cermet grade for fine finishing and extended tool life Wear‑resistant cermet grade GT9530 ISO triangular insert TPMT 130302 PS chipbreaker for finishing operations Compatible with 60° toolholders High-quality finishing with extended tool life The GT9530 grade is a coated cermet developed for finish to light‑universal turning of steel, providing improved wear behaviour under stable cutting conditions. The material composition delivers a consistent cutting edge and helps maintain surface integrity over longer tool life compared with standard ceramic grades. The fine edge geometry and low wear tendency translate directly into fewer insert changes and more predictable cycle times, supporting efficient batch production and repeatable part quality. Predictable mounting and ISO compatibility for easy integration Designed to the ISO series of turning inserts, the plate matches standard triangular holder interfaces where fit is defined by shape, clearance angle, tolerance class, fastening method, size and thickness. The 11° clearance and 60° approach are tailored to common external and internal turning holders; the plate thickness of 3.18 mm and nominal size 13 ensure stable clamping when paired with an appropriate underlay and clamp set. This standardisation simplifies tool‑change planning and reduces setup time across multiple machines. Chip control and geometry tuned for finishing operations Equipped with a PS chipbreaker, the triangular plate supports controlled chip formation during finishing cuts, promoting stable cutting conditions and good surface finishes. The small 0.2 mm corner radius allows light finishing passes and close tolerance turning where minimal material removal is required. The insert features a central hole with a cylindrical bore and a single‑side countersink (40°–60°) to suit common screw and clamp assemblies, enabling secure seating and reliable repeatability in the toolholder system. For personalised tooling recommendations and to secure genuine Tungaloy inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance and availability Technical data Article number: 6998374 Manufacturer SKU: TUN6998374 Article name: TPMT130302-PS GT9530 Numbers Size: 13 Thickness: 3.18 mm Approach angle: 60° Clearance (free) angle: 11° Corner radius: 0.2 mm Special features Coated cermet grade GT9530 PS chipbreaker for finishing Triangular plate form Central hole: cylindrical + one‑side countersink (40°–60°) Intended application: turning Material: carbide FAQ What materials is the GT9530 grade best suited for? The GT9530 grade is formulated as a wear‑resistant cermet primarily for turning of steel, offering good surface finish and extended life in stable machining conditions. Is this insert compatible with standard ISO triangular holders? Yes, the TPMT 130302 GT9530 follows ISO geometry; compatibility depends on holder form, tolerance class, fastening and plate thickness, with the insert designed for common 60° toolholders. What does the PS chipbreaker achieve in practice? The PS chipbreaker on this insert promotes controlled chip formation during finishing cuts, improving surface quality and reducing the risk of long, tangling chips. Can the 0.2 mm corner radius be used for finishing tight tolerances? A 0.2 mm radius is suitable for light finishing and near‑final dimension passes where a fine edge and minimal material removal are required. Which fastening arrangement is required for this plate? The insert uses a central hole with a cylindrical bore and a one‑side countersink (40°–60°); secure clamping with the appropriate underlay and clamp set is recommended for repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130302 NS9530 Wendeplatten - Tungaloy
Take advantage of an ISO‑standard triangular insert that combines a sharp cutting edge and low cutting forces for consistent finishing on steel; the uncoated cermet NS9530 delivers superior surface quality and stable, continuous cutting. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 130302 NS9530 — TPMT 130302 NS9530 turning insert for finishing, Tungaloy The TPMT130302-PS NS9530 is an ISO triangular indexable insert optimised for finishing operations in turning on steel, offering a precise cutting geometry for continuous cuts and small depths of cut. Sharp cutting edge for fine finishing Low cutting forces for stable machining Uncoated cermet grade NS9530 ISO triangular form with 60° corner Consistent finishing brought by cermet technology The uncoated cermet NS9530 is formulated for reliable finishing on steel, combining a sharp cutting edge with reduced built‑up edge tendency. This results in lower cutting forces, which in turn minimises vibration and enables stable turning at small depths of cut. The practical effect is fewer rejects and more predictable batch runs, especially where a high‑quality surface finish is required. The material's behaviour in continuous cutting makes the insert particularly suitable for light finishing passes where dimensional accuracy and surface integrity are priorities. Design and geometry that simplify tool selection With a triangular shape and a 60° corner, the insert delivers good access to external and internal profiles while offering three usable cutting edges. The specified 0.2 mm corner radius balances strength and form accuracy, producing fine toolmarks without compromising edge life. The 11° relief angle reduces cutting resistance, supporting smooth chip flow when paired with an appropriate holder. Being ISO‑standardised, compatibility with a wide range of holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness — this makes system integration straightforward in existing tool setups. Practical chip control and holder integration Equipped with a PS chipbreaker, the insert supports short, controllable chips during finishing, reducing the need for special chip management. The plate features a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping and repeatable seating. As part of a typical system — indexable insert, compatible external holder or drill bar, backing pad/clamping set and spare screws — the component allows rapid changeover and predictable repeatability on production lines. These design choices reduce downtime and maintain throughput in medium‑volume turning operations. Material, application and operational benefits Although compact in size, the insert delivers measurable gains: the uncoated cermet composition enhances wear resistance at finishing speeds, while the geometry is optimised for continuous cutting and small feed rates. For shops aiming to improve surface quality without significant process changes, this insert offers a practical route to better part finish and reduced secondary processing. The consistent performance also supports traceable process control, which is advantageous for regulated or high‑precision manufacturing environments. For finishing applications on steel where surface quality and stability matter, request the Tungaloy TPMT 130302 NS9530 through Metav Werkzeuge or speak with our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998549 Manufacturer SKU: TUN6998549 Model series: ISO‑Drehwendeschneidplatten Label: TPMT130302-PS NS9530 Facts Corner radius: 0.2 mm Plate thickness: 3.18 mm Plate size: 13 mm Corner angle: 60° Relief (rake) angle: 11° Special features Uncoated cermet grade NS9530 Chipbreaker: PS Shape: triangular Hole: with cylindrical hole + one‑sided countersink (40°–60°) Typical application: turning (external and internal), finishing, continuous cuts and small depths of cut Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What material is the insert designed to machine? The insert is optimised for machining steel; the NS9530 cermet composition is tuned for finishing on steel with improved surface quality. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and plate thickness; the insert follows ISO‑standard dimensions for straightforward integration. What does the PS chipbreaker provide? The PS chipbreaker promotes controlled, short chips during finishing, aiding safe chip evacuation and reducing the need for elaborate chip management. Can the insert be used for roughing operations? This grade and geometry are intended for finishing and small depths of cut; for heavy roughing, a different grade with higher toughness is recommended. How many usable cutting edges does the triangular insert offer? The triangular design provides three cutting edges per indexable plate, enabling quick rotation when an edge is worn. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 130302 T9215 Wendeplatten - Tungaloy
Benefit from the CVD‑coated carbide grade T9215 combined with the PS chipbreaker to achieve high wear resistance and fracture toughness for productive steel turning; order the TPMT 130302 T9215 directly via Metav Werkzeuge or consult our specialists for holder and application matching. TPMT 130302 T9215 – Indexable turning insert, CVD‑coated carbide, 60° triangle (Tungaloy) A TPMT 130302 T9215 indexable turning insert engineered for external and internal turning of medium steels. CVD‑coated carbide grade T9215 PS chipbreaker for medium steel turning 60° triangular insert, 0.2 mm corner radius 13 mm size with 3.18 mm thickness Faster machining from a wear‑resistant grade The T9215 grade is a CVD‑coated carbide engineered to combine elevated wear resistance with robust fracture toughness, making it particularly effective for continuous to lightly interrupted cuts in medium‑grade steel. This results in longer tool life and fewer index changes, which in turn reduces non‑productive time and increases throughput. For production environments where cycle time and repeatability matter, the engineered coating reduces abrasive wear and helps maintain consistent cutting performance over longer tool life. Secure clamping and consistent geometry for repeatable results The triangular 60° shape and the specified hole and seat geometry ensure positive engagement in ISO holders when the correct clamp and shim are used. The insert’s 11° clearance angle and its ISO designation support straightforward replacement across standard holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The 3.18 mm plate thickness and the cylindrical hole with a single countersink (40°–60°) provide stable mounting and predictable clamping forces, which contribute to dimensional accuracy and predictable tool behaviour in serial production. Controlled chips and reliable surface quality The PS chipbreaker is tailored for medium steel turning and promotes effective chip control under steady cutting conditions, which improves operator safety and reduces the need for secondary chip handling. The small 0.2 mm corner radius balances edge strength with the ability to produce fine surface finishes on external and internal profiles. When combined in a system—holder, shim/underlay, clamping set and replacement screws—the insert supports consistent surface finish and reduced rework, particularly where parts demand both form accuracy and surface integrity. Contact Metav Werkzeuge for holder-matching advice and to secure supply of the Tungaloy TPMT 130302 T9215; telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 6774033 Manufacturer article number: 6774033 Manufacturer SKU: TUN6774033 Our SKU: 6774033-Tungaloy Article name: TPMT130302-PS T9215 Facts Size: 13 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Insert angle: 60° Hole style: cylindrical hole + single countersink (40°–60°) Special features Material: carbide Coating: CVD‑coated Grade: T9215 Chipbreaker: PS Shape: triangular Model series: ISO standard turning inserts Application: turning System components: holder, underlay/shim, clamping set, replacement screws FAQ What materials is this insert intended for? The TPMT 130302 T9215 is optimised for medium steel applications; the CVD‑coated carbide grade T9215 combines wear resistance and fracture toughness for productive turning. Which chipbreaker is fitted and what does it deliver? The PS chipbreaker improves chip control in continuous to slightly interrupted cuts, enhancing safety and reducing chip management during operations with this Tungaloy turning insert. Is this insert compatible with ISO holders? Yes, the insert follows ISO standards for triangular turning inserts; compatibility is defined by form, clearance angle (11°), tolerance class, fastening, size and thickness. How does the corner radius affect surface finish? The 0.2 mm corner radius provides a compromise between edge strength and surface quality, supporting fine finishes while maintaining sufficient edge stability for general turning tasks. What system elements are recommended for correct use? Use a matching external holder, an underlay/shim and the correct clamping set and screws; these components ensure stable clamping and repeatable cutting performance for this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130302 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9225 and the precise 0.2 mm corner radius for robust, repeatable turning results; the ISO‑standard triangular form ensures straightforward tool‑holder compatibility. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPMT 130302 T9225 – ISO triangular turning insert for turning by Tungaloy The TPMT130302-PS T9225 is an ISO‑standard triangular indexable insert engineered for medium to heavy turning where interrupted cuts or changing engagement demand increased toughness and stable chip control CVD‑coated carbide grade T9225 Robust universal grade for medium/heavy steel Triangular ISO insert, 13 mm size 0.2 mm corner radius, 11° relief angle Reliable cutting performance under variable conditions The insert combines a CVD‑coated carbide substrate with the T9225 grade to deliver a balance of wear resistance and toughness that is particularly advantageous when engagement varies or cuts are slightly interrupted. The coating improves heat resistance and abrasion performance, which translates into more consistent tool life and predictable machining cycles. As a result, stable chip control is supported even in heavier removal rates, reducing the need for frequent tool changes and helping to maintain productive cycle times. Simple integration into ISO tool systems for efficient production Designed to the ISO dimensions and designated as a triangular insert, the component fits standard ISO holders when form, relief angle, tolerance class, fastening and thickness align. The 11° relief angle and 3.18 mm thickness provide a robust seat in the pocket while the 13 mm size offers a compact solution for many lathes and tool posts. This compatibility reduces inventory complexity and enables quick replacement during set‑ups, supporting high uptime and a lean tooling strategy on the shop floor. Practical guidance for typical turning tasks The built‑in chipbreaker PS is tailored for steel turning, promoting controlled chip formation and easier evacuation in common external and internal turning operations. The 0.2 mm corner radius is suited to operations where a balance between surface quality and cutting force is needed—small radii favour finer surface finish while still offering robustness in less stable conditions. Select the grade and chipbreaker in line with workpiece stability and intended finish: the universal nature of this grade supports a wide material coverage across standard steel alloys. For tailored application recommendations on Tungaloy CVD‑coated turning inserts and to discuss suitable holders or cutting parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781050 SKU: 6781050-Tungaloy Manufacturer SKU: TUN6781050 Model series: ISO turning indexable inserts Grade: T9225 (CVD‑coated carbide) Material: Carbide Key numbers Insert designation: TPMT130302-PS ISO code: 130302 Size: 13 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Special features Triangular form With hole: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: PS Use: Turning (external and internal) ISO‑standard geometry for holder compatibility Robust universal grade for medium to heavy steel CVD‑coated carbide for improved wear resistance FAQ Is this insert suitable for interrupted cuts in steel? The TPMT130302-PS T9225 features a tough CVD‑coated carbide grade designed for medium to heavy steel and performs well under slightly interrupted cutting conditions. Which chipbreaker is fitted and what is it good for? The insert comes with the chipbreaker PS, optimised for steel turning to promote controlled chip formation and reliable evacuation during standard turning operations. Will this insert fit standard ISO triangular holders? Yes, the TPMT130302-PS follows ISO dimensions; compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness with the chosen holder. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius offers a compromise between improved surface quality and mechanical robustness, suitable for finishing and medium cuts where a finer surface is desired. Can the TPMT130302-PS T9225 be used for internal turning? The insert is suitable for both external and internal turning applications; ensure appropriate holder geometry to achieve the desired cutting engagement and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 130304 AH6225 Wendeplatten - Tungaloy
Compact PVD-coated carbide insert with a stable cutting edge and chipbreaker PS offers predictable tool life and efficient chip control for turning operations in rostfreier Stahl; combine reliable edge stability and ISO compatibility for uninterrupted production. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific selection. TPMT130304-PS AH6225 — ISO triangular turning insert, PVD-coated (Tungaloy) The TPMT130304-PS AH6225 is an ISO triangular indexable insert engineered for medium-duty turning in rostfreier Stahl and similar materials. PVD-coated carbide grade AH6225 ISO triangular insert, 13 mm size Chipbreaker PS for controlled chip formation Consistent performance from a PVD-coated grade The PVD-coated carbide AH6225 is designed to provide a stable cutting edge under varying conditions, making it suitable for medium-cutting-depth turning of rostfreier Stahl. The surface coating enhances wear resistance and reduces built-up edge, which translates into longer life compared with uncoated grades. Specifying a PVD finish also improves heat resistance at the tool–workpiece interface, meaning the insert keeps its geometry for longer and supports reproducible dimensional results in workshops and production environments. ISO compatibility and secure mounting for reliable setups Designed to the ISO-standard for turning inserts, the triangular form and the central hole with a cylindrical bore plus a one-sided countersink (40°–60°) ensure repeatable clamping and straightforward interchangeability between matched holders. The insert’s 13 mm size, 3.18 mm thickness and relief angle 11° align with common holder geometries; matching by form, clearance angle, tolerance class, fastening and thickness guarantees correct seating. This compatibility reduces setup time and supports consistent process parameters across multiple machines or toolposts. Better chip control and surface quality with the PS breaker The integrated chipbreaker PS is tailored for controlled chip formation during both external and internal turning, reducing rework and improving cycle reliability. The corner radius 0.4 mm provides an effective balance between edge strength and surface finish, allowing improved surface quality on interrupted cuts and general turning passes. Together, the chipbreaker geometry and the carbide composition support higher metal removal rates while maintaining stable cutting conditions, which benefits productivity without sacrificing workpiece integrity. For personalised selection guidance or to procure genuine Tungaloy TPMT130304-PS AH6225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to recommend the optimal grade and holder combination for the intended turning application. Technical data Article number: 6831295 SKU: 6831295-Tungaloy Manufacturer SKU: TUN6831295 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPMT130304-PS AH6225 Dimensions & core data Size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Insert angle: 60° Manufacturer article number: 6831295 Features & applications Shape: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Material: Hartmetall (PVD-coated) Grade: AH6225 Chipbreaker: PS Typical use: external and internal turning Compatibility: ISO holders determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What applications is this insert best suited for? The TPMT130304-PS AH6225 is optimised for medium-duty turning operations, particularly in rostfreier Stahl where a sharp but stable cutting edge and controlled chips are required. Which holder features must be checked for compatibility? Verify form, relief/clearance angle, tolerance class, fastening method, size and thickness to ensure the insert seats correctly in the intended ISO-compatible holder. How does the AH6225 grade affect tool life? The PVD-coated AH6225 grade provides improved wear resistance and heat tolerance, delivering a longer service life and more predictable wear behaviour than many uncoated alternatives. Is the insert suitable for internal turning as well as external turning? Yes, the triangular geometry and the PS chipbreaker permit use in both external and internal turning applications, provided the holder affords correct clearance and support. What effect does the 0.4 mm corner radius have on the finished surface? A 0.4 mm corner radius offers a compromise between edge robustness and surface finish, improving finish quality on general turning passes while maintaining edge strength for moderate interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade combined with a precise 0.4 mm nose radius to secure consistent stainless-steel turning performance; compatibility with ISO holders keeps integration straightforward. Order directly via Metav Werkzeuge or consult our technical advisors if additional data is required. TPMT 130304 AH6225 — Turning insert TPMT130304-PSS for turning, Tungaloy TPMT130304-PSS AH6225 is an ISO-standard triangular turning insert engineered for dependable performance in stainless-steel machining, featuring a PSS chipbreaker and a PVD-coated carbide substrate. PVD-coated carbide AH6225 for stainless steels ISO triangular insert TPMT130304, 13 mm 0.4 mm nose radius for precise profiles Cylindrical hole with 40°–60° countersink Maximised productivity for stainless-steel turning The combination of a PVD-coated surface and the AH6225 carbide grade delivers a balance of wear resistance and edge stability that suits medium cutting conditions and varying workpiece properties. The chipbreaker PSS is optimised for chip control in stainless steels, reducing rework and machine downtime. With a defined 0.4 mm nose radius, the insert supports accurate profile work and consistent component tolerances, while the ISO geometry ensures compatibility with standard holders for repeatable setup and predictable tool life. Secure integration and straightforward tool selection Compatibility with the toolholder is governed by insert form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s 11° relief angle and triangular form make it suitable for many external and internal turning setups. The 13 mm size and 3.18 mm thickness combine rigidity with economical material usage, facilitating stable machining even where fixturing is modest. Stating these measurable parameters simplifies the selection process and reduces trial-and-error, saving set-up time on the shop floor. Practical benefits for shop-floor reliability Choosing the right chipbreaker and grade reduces process variance: the PVD coating minimises built-up edge, the AH6225 grade offers a sharp but robust cutting edge and the insert’s hole and countersink style enable secure clamping. These attributes translate into fewer interruptions, more consistent surface finishes and a higher first-pass yield. For operations seeking predictable productivity and lower tooling overhead, this insert is a pragmatic choice that supports efficient batch runs and flexible production schedules. For robust stainless-steel turning with the PVD-coated AH6225 grade, contact Metav Werkzeuge for a tailored quotation and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6829892 Manufacturer SKU: TUN6829892 Supplier SKU: 6829892-Tungaloy Model series: ISO turning indexable inserts Designation: TPMT130304-PSS AH6225 Core specifications Insert size: 13 mm Thickness: 3.18 mm Nose radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole style: cylindrical hole + countersink 40°–60° Materials & features Carbide substrate, PVD coating (AH6225) Chipbreaker: PSS Application: Turning (external and internal) Compatibility: determined by holder form, clearance, tolerance class, clamping, size, thickness FAQ Is this insert suitable for stainless-steel machining? Yes. The AH6225 PVD-coated carbide grade and the PSS chipbreaker are designed for machining stainless steels, providing good edge stability under typical turning conditions. Which holders accept this triangular ISO insert? Holders designed for ISO triangular inserts with the TPMT130304 form and matching clamping geometry will accept this insert; compatibility depends on form, clearance angle, tolerance class, clamping system, size and thickness. What role does the 0.4 mm nose radius play? A 0.4 mm nose radius improves profile accuracy and surface finish while limiting cutting forces, making the insert suitable for controlled finishing and semi-finishing operations. Can the insert be used for both internal and external turning? Yes. The geometry and thickness support both external and internal turning applications when paired with an appropriate holder and stable setup. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6829892 and the supplier SKU is 6829892-Tungaloy (Manufacturer SKU: TUN6829892). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade engineered for reliable performance in demanding turning operations and interrupted cuts; the combination of a 0.4 mm corner radius and a PS chipbreaker delivers controlled chips and extended tool life, supporting smooth production flow. Order directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 130304 AH6235 triangular turning insert, PVD-coated carbide — Tungaloy A TPMT 130304 AH6235 triangular ISO turning insert designed for external and internal turning, optimised for rostfreier Stahl and interrupted cutting conditions. PVD-coated carbide grade AH6235 Triangular 13 mm insert, 60° included angle 0.4 mm corner radius for medium finishing PS chipbreaker for interrupted cuts Proven durability for rostfreier Stahl and difficult cuts The insert’s PVD-coated carbide composition and the AH6235 grade provide a tougher cutting edge specifically formulated for machining rostfreier Stahl and operations with elevated breakout risk. This results in improved wear resistance and consistent edge stability under shock loads, meaning fewer unplanned tool changes and higher process uptime. The design supports confidence in repeatable surface quality during both facing and profiling operations. Secure fit and ISO compatibility to reduce setup time As an ISO-standard insert with a 13 mm triangular form and 3.18 mm plate thickness, compatibility with holders is determined by shape, clearance angle, tolerance class, fastening and size. The insert features a cylindrical hole with single-sided countersink (40°–60°) for positive clamping and stable seating. These mechanical details ensure precise seating in standard external holders or boring bars, simplifying changeovers and reducing machine downtime through predictable repeatability. Controlled chip formation and economical tool life The PS chipbreaker is matched to the plate geometry to promote manageable chip shapes in interrupted and continuous cut conditions, improving surface finish and safe chip evacuation. Combined with the PVD surface treatment, the insert offers better edge security and longer cutting intervals, which lowers tooling costs per part and supports higher productivity. Operators gain practical benefits: steadier feeds, fewer interruptions and a more reliable manufacturing rhythm. For precision turning of rostfreier Stahl using Tungaloy’s AH6235-grade inserts, contact Metav Werkzeuge for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6890205 SKU: 6890205-Tungaloy Manufacturer SKU: TUN6890205 Model series: ISO turning indexable inserts Material: carbide (Hartmetall) Grade: AH6235 (PVD-coated) Facts Radius: 0.4 mm Thickness: 3.18 mm Inscribed circle / size: 13 mm Clearance angle: 11° Included angle: 60° ISO code: 130304 Special features Triangular plate geometry Chipbreaker: PS Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Suited for rostfreier Stahl and interrupted cuts PVD coating for enhanced wear resistance FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The TPMT 130304 AH6235 turning insert is a PVD-coated carbide grade formulated for rostfreier Stahl and performs well in interrupted-cut conditions. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the ISO-standard triangular format simplifies matching to common external holders and boring bars. What chip control can be expected with the PS chipbreaker? The PS chipbreaker promotes compact chips and reliable evacuation in interrupted and moderate continuous cuts, improving surface finish and process safety. Can the insert be used for internal turning as well as external turning? Yes. The geometry and hole-style fastening allow use in both external holders and appropriate boring bars for internal operations. What identifiers should be quoted when ordering? Reference the Tungaloy turning insert TPMT 130304 AH6235 and use the SKU 6890205-Tungaloy or article number 6890205 for clear ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH6235 Wendeplatten - Tungaloy
A robust, PVD-coated carbide insert with a 0.4 mm corner radius and a PM chipbreaker provides consistent performance in turning stainless steels and interrupted cuts; take advantage of reliable clamping and ISO compatibility and order directly via Metav Werkzeuge or consult our advisors for process-specific recommendations. TPMT 130304 AH6235 – ISO triangular turning insert with PVD coating (Tungaloy) A TPMT 130304 AH6235 triangular insert designed for turning applications, optimised for machining stainless steels and for use in interrupted cuts where increased break-out risk occurs. ISO 60° triangular form PVD-coated carbide grade AH6235 0.4 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink for secure clamping Consistent cutting performance for demanding stainless‑steel jobs The PVD-coated carbide grade AH6235 combines toughness with wear resistance, offering a balance for operations on stainless steel and other difficult-to-machine alloys. The chipbreaker PM is shaped for controlled chip formation under varying stability conditions, which helps reduce unexpected tool setbacks during interrupted cuts. With a 0.4 mm corner radius, the insert supports improved surface finish and edge strength, lowering the risk of premature chipping while maintaining dimensional control. These characteristics translate into more predictable cycle times and reduced scrap rates in serial production. Secure clamping and ISO compatibility to simplify tooling decisions Manufactured to ISO dimensions and a 60° triangular geometry, the insert fits a broad range of standard external holders and boring bars; compatibility is governed by shape, relief angle, tolerance class, attachment method, size and thickness. The 11° relief angle and plate thickness of 3.18 mm contribute to reliable seating and repeatable engagement in the toolholder. The central cylindrical hole with one‑side countersink (40°–60°) ensures secure clamping, minimising micro-movements under load and supporting consistent tool life. Specifying ISO-conforming inserts reduces setup complexity across multiple machine tools and simplifies spare stocking. Practical guidance for application and process security For external and internal turning where workpiece stability varies, select the PM chipbreaker and the AH6235 grade when machining stainless steels or when interrupted cuts are anticipated. Start with conservative feeds and ramp up within recommended ranges to evaluate edge behaviour; the tougher grade tolerates shock loads better than harder, more brittle grades. Where surface finish is critical, the 0.4 mm corner radius helps achieve a balance between edge strength and finish quality. For assembly, pair the insert with an appropriate support shim and clamp set, and ensure replacement screws meet the holder specification to preserve clamping integrity. Contact Metav Werkzeuge for an application review and to request the Tungaloy TPMT130304-PM AH6235 insert or tailored recommendations for turning tasks Technical data Article number: 6890212 Manufacturer SKU: TUN6890212 Model series: ISO turning indexable inserts Designation: TPMT130304-PM AH6235 Material: Carbide Coating: PVD Facts Corner radius: 0.4 mm Geometry angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 13 mm Special features Chipbreaker: PM Hole: cylindrical hole with one-side countersink (40°–60°) Plate shape: triangular Grade: AH6235 Typical application: turning; suitable for interrupted cuts and stainless steels FAQ What materials is this insert suitable for? The AH6235 grade with a PM chipbreaker is formulated for stainless steel and other tough alloys; the TPMT 130304 design works well where interrupted cuts or breakout risk are present. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius improves edge strength and supports a finer surface finish while reducing the likelihood of chipping during heavy engagement. Is the insert compatible with standard toolholders? Yes, the insert follows ISO dimensions and fits standard triangular toolholders and boring bars provided the holder matches the form, relief angle, tolerance and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH6235 Wendeplatten - Tungaloy
Reliable PVD-coated AH6235 grade combined with the PSS chipbreaker and a 0.4 mm corner radius ensures secure turning performance for stainless steels and interrupted cuts. Benefit from improved edge stability and predictable tool life — order directly via Metav Werkzeuge or consult our specialists for selection advice. TPMT 130304 AH6235 — TPMT130304-PSS turning insert for Drehen (PVD-coated carbide, 0.4 mm radius) — Tungaloy A TPMT130304-PSS AH6235 indexable turning insert engineered for reliable external and internal turning, especially where stainless steels and interrupted cuts present elevated chipping risk. PVD-coated carbide grade AH6235 Optimised PSS chipbreaker for steels 0.4 mm corner radius for precise finishing Improved process reliability through a tougher grade The AH6235 grade is a PVD-coated carbide formulated to combine toughness with wear resistance, specifically for applications involving rostfreie Stähle and interrupted cuts. A tougher substrate reduces edge chipping in unstable cutting conditions, which leads to fewer tool changes and more consistent cycle times. PVD (physical vapour deposition) is a thin-film coating applied to the cutting edge to improve resistance to adhesion and high-temperature wear; in practice, this means longer effective edge life under demanding turning operations. Geometry and chip control for consistent surface quality The triangular plate with a 60° included angle and a 0.4 mm corner radius delivers a controlled engagement with the workpiece, balancing strength and finishing capability. The PSS chipbreaker is optimised for steel machining and supports predictable chip flow under a range of cutting parameters. The insert’s 11° clearance contributes to reduced rubbing and improved surface finish. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness; this ensures that the insert is correctly seated and clamped, which is essential for repeatable results and tool life. System benefits and practical workshop use The insert is supplied as an ISO-standard turning plate and forms part of a system that includes a matching external holder or boring bar, a pad/clamping set and replacement screws. This modular approach allows rapid changeover and minimises downtime. For choice of chipbreaker and grade, match the PSS geometry and AH6235 toughness to the workpiece material, cutting strategy and machine stability to achieve productive machining. The combination of controlled chip formation and robust substrate provides confidence in everyday production, reducing scrap and stabilising output quality. Discuss the suitability of Tungaloy AH6235 inserts with Metav Werkzeuge to optimise turning performance; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and quick availability Technical specifications Article number: 6890196 SKU (merchant): 6890196-Tungaloy Manufacturer SKU: TUN6890196 Label: TPMT130304-PSS AH6235 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Product designation: TPMT130304-PSS AH6235 Dimensions & core data Corner radius: 0.4 mm Insert size: 13 mm Thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Hole style: with hole Countersink: cylindrical hole + single-sided countersink (40°–60°) Materials & special features Material: cemented carbide (Hartmetall) Grade / coating: AH6235 (PVD-coated) Chipbreaker: PSS Shape: triangular Application: turning (external and internal) Typical system setup: ISO insert with matching holder, pad/clamp set and spare screws Suitability: designed for stainless steels and interrupted cuts; increased resistance to chipping FAQ Which materials are best machined with this insert? The TPMT130304-PSS AH6235 insert from Tungaloy is optimised for rostfreie Stähle (stainless steels) and performs well in interrupted cutting where chipping risk is higher. What effect does the 0.4 mm corner radius have? A 0.4 mm radius balances strength at the cutting edge with the ability to achieve a fine surface finish; it reduces edge stress compared with very small radii while still permitting accurate contouring. How is compatibility with a toolholder ensured? Compatibility is determined by the insert form, the 11° clearance angle, tolerance class, fastening type, size and thickness; proper matching to the holder secures repeatable seating and clamping. What mounting features does the insert have? The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°), suitable for standard clamping systems and replacement screws as used in ISO insert assemblies. Is the coating suitable for high-temperature turning? The PVD coating on the AH6235 grade enhances resistance to adhesion and thermal wear, improving edge life under elevated cutting temperatures encountered with stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH725 Wendeplatten - Tungaloy
Combine PVD-coated carbide durability with the AH725 universal grade and a 0.4 mm corner radius to achieve consistent process security and longer tool life; order or request advice via Metav Werkzeuge to integrate this insert into production without delay. TPMT 130304 AH725 — ISO turning insert, PVD-coated carbide (Tungaloy) TPMT 130304 AH725 is an ISO-standard triangular turning insert designed for external and internal turning, offering a universal, breakage-resistant grade for steel and stainless steels. PVD-coated carbide for high wear resistance Universal AH725 grade for steel and stainless ISO triangular insert with secure central hole 0.4 mm corner radius for stable edge strength Reliable cutting performance under varied conditions This ISO triangular insert combines a PVD-coated hardmetal substrate with the AH725 grade to deliver reliable cutting behaviour across mixed batches of carbon and stainless steels. The coating reduces flank wear and helps maintain a consistent cutting edge over longer cycles, which translates into fewer interruptions for insert changes and a more predictable process. With the geometry geared towards both finishing and moderate roughing tasks, the insert contributes to reproducible surface quality and stable tool life, supporting higher overall productivity in turning applications. Simple integration with ISO holder systems The insert follows ISO dimensions and mounting conventions, so compatibility is achieved via matching form, clearance angle and size with the chosen holder, clamping kit and mounting screw. The triangular shape and central cylindrical hole with a one-sided countersink ensure secure clamping and accurate positioning in standard ISO turning holders. Specified values such as 3.18 mm thickness, a 60° cutting geometry and an 11° clearance make selection straightforward when replacing inserts or setting up new tool assemblies, reducing setup time and minimising trial-and-error on the shop floor. Improved chip control and application guidance Equipped with a PM chipbreaker, the insert is aimed at controlled chip formation during both external and internal turning. The modest 0.4 mm corner radius balances edge strength and surface finish: it reduces the risk of edge chipping while still enabling close tolerance finishing. For best results, select the chipbreaker and grade according to workpiece material and fixture stability; the AH725 grade is particularly suited to mixed production where process security and consistent performance are priorities. These choices contribute directly to lower scrap rates and steadier cycle times. For tailored application advice or to procure genuine Tungaloy ISO inserts including TPMT130304-PM AH725, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, expert support Technical data Article number: 6856728 Manufacturer SKU: TUN6856728 Item SKU: 6856728-Tungaloy Designation: TPMT130304-PM AH725 Material: carbide Coating: PVD-coated Facts Shape: triangular Size: 13 mm Thickness: 3.18 mm Cutting angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Grade: AH725 (universal, breakage-resistant) Chipbreaker: PM Series: ISO turning inserts Application: turning; suitable for steel and stainless steels Compatibility: determined by form, clearance, tolerance class, fastening, size and thickness FAQ Is this insert suitable for stainless steel? The TPMT130304-PM AH725 is designed as a universal, breakage-resistant grade for steel and stainless steels and performs well under mixed-material production. What are the key geometry values to check for holder compatibility? Check the 60° cutting geometry, 11° clearance angle and 3.18 mm thickness; these values determine compatibility with ISO holders and clamping kits. Which chipbreaker does the insert use and what is the benefit? The PM chipbreaker promotes controlled chip formation during turning, improving chip evacuation and reducing the risk of tangling in both external and internal operations. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping while still permitting good surface finish and tolerance control in finishing passes. Can the insert be used for internal turning as well as external turning? Yes, the ISO-standard triangular design and PM chipbreaker make it suitable for both external and internal turning, especially where process security and variable workpiece materials are factors. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise geometry and predictable chip control for steady production and fewer tool changes. Order the TPMT130304-PS AH725 directly via Metav Werkzeuge or request advice from the technical consultants for the best holder compatibility. TPMT130304-PS AH725 — TPMT 130304 AH725 turning insert by Tungaloy (PVD-coated carbide) The TPMT130304-PS AH725 is an ISO-indexable triangular turning insert designed for external and internal turning applications, offering universal performance for Stahl and rostfreier Stahl with a PS chipbreaker for controlled chip formation. PVD-coated carbide AH725 for Stahl and rostfreier Stahl PS chipbreaker for reliable chip control Triangle ISO insert 13 mm, 0.4 mm corner radius Cylindrical hole with one-sided countersink (40°–60°) Boosted process reliability through PVD-coated carbide The PVD-coated carbide grade AH725 is engineered to deliver process reliability across a range of turning operations. Coating hardness and adhesion reduce flank wear and substrate exposure, which extends cutting life and limits unplanned tool changes. For workshops processing mixed batches or frequent material changes, the universal, fracture‑resistant grade supports consistent cycle times and helps maintain throughput. The balanced combination of coating and substrate material minimises thermal and mechanical wear mechanisms that typically shorten insert life. Consistent edge geometry for reproducible surface quality A defined insert geometry — including the 60° included angle and 0.4 mm corner radius — ensures a stable cutting edge with predictable material engagement. The modest corner radius provides a robust edge for general turning while contributing to a consistent surface finish, especially when finishing passes are required. Edge strength and radius selection are decisive for avoiding edge chipping when machining interrupted cuts or variable cross-sections; the radius specified here helps to balance edge life and achievable roughness without the need for frequent rework. ISO sizing and mounting designed for quick changeovers Manufactured to the ISO series for triangle inserts, the 13 mm size and 3.18 mm thickness enable compatibility with a wide range of triangular holders. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to secure mounting and repeatable clamping. Compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; these parameters ensure secure seating and accurate repeatability when inserts are indexed or changed, reducing setup time and maintaining component tolerances. Optimised chip control and versatile application range The PS chipbreaker supports controlled chip formation across turning tasks, making it suitable for both roughing and light finishing passes in Stahl and rostfreier Stahl. The fracture-resistant nature of the grade is particularly advantageous for smaller tool geometries and operations that place a premium on process stability. By selecting the matching chipbreaker and grade, machining cycles are stabilised, surface integrity is preserved and tool life is extended — delivering measurable productivity gains on batch and single-piece production alike. Contact Metav Werkzeuge for availability and tailored holder recommendations for this Tungaloy turning insert; consultants can advise on the optimal chipbreaker and holder pairing to match the intended Stahl or rostfreier Stahl application. Technical Data Article number: 6856681 Manufacturer SKU: TUN6856681 Item SKU: 6856681-Tungaloy Product name: TPMT130304-PS AH725 Material: carbide Facts Corner radius: 0.4 mm Plate size: 13 mm Plate thickness: 3.18 mm Clearance angle (frewinkel): 11° Included angle: 60° Manufacturer article number: 6856681 Special features PVD-coated carbide AH725 PS chipbreaker (chip control) Triangle plate form (ISO) With cylindrical hole and one-sided countersink (40°–60°) Suitable for turning (external and internal) Universal, fracture-resistant grade for Stahl and rostfreier Stahl Compatibility determined by holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TPMT130304-PS AH725 is designed as a universal, fracture‑resistant grade and is suitable for machining Stahl and rostfreier Stahl. Which chipbreaker suits interrupted cuts? The PS chipbreaker on this insert provides controlled chip formation and improved performance on interrupted cuts when the grade AH725 is combined with an appropriate toolholder. How is the insert secured in the holder? The insert is supplied with a cylindrical hole plus a one‑sided countersink (40°–60°) to ensure secure mounting and repeatable clamping in compatible triangle holders. What geometrical features influence surface finish? The 0.4 mm corner radius and the 60° included angle contribute to a robust edge and a reproducible surface finish; these parameters balance edge strength and achievable roughness. Is this insert compliant with ISO sizing for easy replacement? Yes, the insert is an ISO‑series triangular plate (13 mm) with a plate thickness of 3.18 mm for standardised compatibility and straightforward changeovers. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH725 Wendeplatten - Tungaloy
Take advantage of a universal PVD-coated grade and a proven triangular geometry to maintain stable chip formation and consistent results across mixed steels and stainless steels; order matching inserts and accessories through Metav Werkzeuge or consult the technical team for tailored recommendations. TPMT130304-PSS AH725 — Turning insert (ISO triangular, PVD-coated) by Tungaloy TPMT130304-PSS AH725 is a PVD-coated carbide insert designed for precision external and internal turning in ISO systems, offering robust process security for mixed steel and stainless steel applications. PVD-coated carbide for high wear resistance Universal grade AH725 for steel and stainless steels Triangular 60° insert with 0.4 mm corner radius ISO-compatible with cylindrical hole and countersink Durable grade for consistent chip control and process security The AH725 grade combines a PVD-coated carbide substrate with an optimised structure that promotes stable chip formation and reliable edge integrity in a wide range of steels, including stainless steels. This universality reduces tool inventory by covering many common workpiece materials, while the PVD layer improves resistance to abrasive and adhesive wear. The result is longer stable life in interrupted cuts and variable material batches, which supports predictable cycle times and reduces unexpected stoppages. The insert designation TPMT130304-PSS AH725 signals a standardised geometry for straightforward replacement in ISO holders. Precision geometry and ISO compatibility for repeatable seating The triangular shape with a 60° included angle and a 0.4 mm corner radius provides a balanced combination of strength and cutting edge accessibility, making it suitable for both finishing and light roughing passes. The insert thickness of 3.18 mm and the central cylindrical hole with a one-sided countersink (40°–60°) ensure secure clamping and repeatable positioning in compatible holders. Compatibility depends on form, clearance angle, tolerance class, mounting method, size and thickness, so pairing the insert with a matching shim, clamping set and replacement screws is vital for achieving repeatable accuracy and surface finish. Chipbreaker design and application benefits for productivity The PSS chipbreaker is tailored for external and internal turning operations where chip control and unclogged evacuation are essential, particularly in compact tooling setups and where process reliability is critical. By promoting predictable chip shapes and evacuation, the chipbreaker reduces the risk of re-cutting and tooling damage, which lowers downtime and tooling costs over time. For workshops seeking a practical balance between productivity and tool life, this insert supports shorter setup times, fewer tool changes and consistent part quality when used with an appropriate holder and clamping system. Contact Metav Werkzeuge for precise holder matching, batch availability and practical advice on integrating Tungaloy AH725 inserts into production; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864872 Manufacturer SKU: TUN6864872 SKU: 6864872-Tungaloy Model series: ISO turning inserts Facts Insert designation: TPMT130304-PSS Size: 13 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide Coating: PVD Grade: AH725 Chipbreaker: PSS Plate shape: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Suitable materials: steel and stainless steels FAQ What materials is this insert designed for? This insert in grade AH725 is engineered for machining a broad spectrum of steels and stainless steels, offering dependable performance where material mixes occur. How does the PSS chipbreaker affect machining? The PSS chipbreaker shapes and breaks chips reliably during turning, improving evacuation and reducing the likelihood of re-cutting or tool damage in confined tool geometries. Which holders and accessories are required for correct use? Correct seating requires an ISO-compatible turning holder, a matching shim or clamping set and the recommended replacement screw; compatibility is determined by form, clearance angle, tolerance class, size and thickness. Is the insert suitable for finishing passes? Yes; the 0.4 mm corner radius and 60° geometry allow controlled finishing cuts while still providing adequate edge strength for light roughing where required. How does the AH725 grade contribute to process stability? AH725 combines a robust carbide substrate with a PVD layer to resist abrasion and edge chipping, leading to consistent tool life and higher process reliability in varied production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 for broad material coverage, the 0.4 mm nose radius for improved surface finish, and ISO compatibility for smooth process integration; order directly via Metav Werkzeuge or consult our specialists for holder matching and cutting data. TPMT 130304 AH725 triangular turning insert for ISO turning by Tungaloy TPMT 130304 AH725 is an ISO-standard triangular indexable insert designed for general turning operations, offering universal, fracture-resistant performance for steel and stainless steels. ISO-standard triangular insert PVD-coated AH725 universal grade 0.4 mm nose radius for fine finishes Central hole with 40°–60° countersink Reliable machining performance and process security The triangular indexable insert delivers consistent results in external and internal turning thanks to the AH725 grade and a PVD-coated carbide substrate. The coating reduces flank wear and improves resistance to adhesion when machining steels and stainless steels, which helps maintain tool life and minimise unscheduled tool changes. The PSF chipbreaker is optimised for controlled chip formation under varying cut conditions; this stabilised chip control reduces the risk of insert breakage and supports reproducible cycle times on medium- to high-duty programmes. Compatibility with ISO holders ensures predictable clamping and repeatable reference positions in serial production. Precision geometry for surface quality and versatility A 0.4 mm nose radius combines a fine cutting edge for good surface finish with sufficient edge strength for light to moderate depths of cut. The insert’s 11° clearance contributes to reduced rubbing and improved tool-to-workpiece engagement, which in turn lowers cutting forces and heat generation. The triangular shape gives three usable cutting corners, improving cost-efficiency per index. Where a smoother finish is required, the small radius and the PVD layer work together to deliver finer surface results without sacrificing process reliability. For roughing, the same geometry provides stable performance when paired with appropriate feeds and depths. Compatibility, handling and set-up explained The insert is an ISO-design plate with a central fastening hole — a cylindrical hole with a one-sided countersink (40°–60°) — that matches standard clamping systems and replacement screws. The plate thickness of 3.18 mm and plate size 13 mm align with common ISO holders; these dimensions determine insert stiffness and heat capacity during cutting. The insert’s universal, fracture-resistant nature reduces inventory complexity: one grade covers multiple steel types and small tools where process security is paramount. When selecting a holder, match form, free angle, tolerance class, fastening method, size and thickness to guarantee correct seating and consistent repeatability. For advice on selecting the correct holder, cutting data recommendations for the AH725 grade, or to place an order via Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 — our technical consultants will assist with compatibility and process optimisation. Technical data Article number: 6865482 SKU: 6865482-Tungaloy Manufacturer SKU: TUN6865482 Grade: AH725 Material: Carbide (PVD-coated) Data Corner radius: 0.4 mm Plate size: 13 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 11° Hole style: Cylindrical hole + one-sided countersink (40°–60°) Special features ISO-standard triangular turning insert PSF chipbreaker Universal, fracture-resistant grade for steel and stainless steels For external and internal turning Compatible with ISO holders and drill bars Three usable cutting corners per insert FAQ Which materials is this insert suitable for? This TPMT 130304 AH725 insert by Tungaloy is designed as a universal, fracture-resistant grade for machining steels and stainless steels, making it suitable for a wide range of turning applications. What does the AH725 grade offer compared with other grades? The AH725 grade provides a balance of wear resistance and toughness; for the TPMT 130304 AH725, this means improved process security and wider material coverage compared with narrowly specialised grades. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius on the insert offers a compromise between surface finish and edge strength, allowing finer finishes at moderate feeds while maintaining resistance to chipping under intermittent cuts. What is the purpose of the central hole and countersink? The cylindrical centre hole with a one-sided countersink (40°–60°) enables secure fastening in standard clamping systems, ensuring correct seating and repeatable reference for serial production. Can the insert be used for finishing and semi-finishing? Yes, the combination of the small nose radius, PVD-coated carbide and PSF chipbreaker makes the insert suitable for finishing and semi-finishing when matched with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 AT9530 Wendeplatten - Tungaloy
Data inconsistency: the product is described both as carbide and as a coated cermet (AT9530); please verify the source data to ensure accuracy and avoid potential confusion or misinterpretation, as such discrepancies could lead to errors in documentation, manufacturing processes, or customer understanding, which might ultimately impact decision-making, product performance, or overall reliability; it is crucial to cross-check the information provided with the original source or consult relevant experts to clarify whether the product is indeed a carbide, a coated cermet, or possibly a combination of both, as this clarification will help maintain consistency and trust in the data being used.
TPMT 130304 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet GT9530 grade that delivers improved surface finish and extended tool life in stable turning setups, combined with a 60° triangular form and 0.4 mm corner radius for precise edge engagement; order or request advice directly via Metav Werkzeuge for fast, application-focused supply. TPMT130304-PF 130304 GT9530 — ISO turning insert for finish-to-light turning, Tungaloy TPMT130304-PF GT9530 is an ISO-format triangular insert designed for finishing to light universal turning of steel under stable machining conditions TPMT130304-PF ISO turning insert GT9530 Coated cermet for finish to light turning 60° triangular form with 0.4 mm corner radius Cylindrical hole with single-side countersink (40°–60°) Productive finish turning with longer in-process life The coated cermet GT9530 provides a balance between wear resistance and surface quality, making it suitable for finish to light turning of steel where stable setups and consistent cuts are possible. The cermet coating reduces flank wear and supports a smoother part surface, which can lower subsequent finishing costs. Specifying this grade in place of a standard uncoated plate commonly results in longer tool life per edge and fewer part reworks, improving overall process efficiency and cost-effectiveness. Secure clamping and precise seat geometry for stable cuts Compatibility with the clamping system depends on the insert’s form, clearance angle (11°), tolerance class, fastening method, size and thickness; the TPMT130304-PF is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure repeatable seating in ISO-compatible holders. The 60° triangular form and the 0.4 mm corner radius provide defined contact points that reduce micro-movement during engagement, minimising vibration and improving dimensional stability. This results in better surface finish and more predictable tool life in demanding production runs. Application range and selection guidance for steel turning This indexable plate is optimised for turning of steel grades where a good surface finish and extended edge life are required under stable conditions. The GT9530 grade is intended as a wear-resistant cermet solution for finishing and light general-purpose turning rather than for heavy interrupted cuts; for tougher conditions or hard materials, consider grades specifically formulated for high toughness. Selecting the correct chipbreaker PF and matching the insert to a suitable external holder or boring bar ensures effective chip control and consistent machining results. System considerations and practical recommendations An efficient system comprises the ISO insert, a compatible external holder or boring bar, a proper backing/clamp set and replacement screws; matching these components reduces assembly error and supports repeatable performance. With a plate thickness of 3.18 mm and inscribed size 13 mm, the insert seats in standard triangular pockets designed for ISO turning plates. For best results, combine the GT9530 grade with stable clamping, fine feed rates for finishing passes and cutting speeds aligned to cermet recommendations to exploit the insert’s surface-quality benefits while preserving edge life. For precision finishing with the GT9530 cermet grade, contact Metav Werkzeuge for application advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998354 Manufacturer: Tungaloy Merchant SKU: 6998354-Tungaloy Manufacturer SKU: TUN6998354 Model series: ISO turning indexable inserts Designation: TPMT130304-PF GT9530 Facts Corner radius: 0.4 mm Insert angle: 60° Clearance angle: 11° Plate thickness: 3.18 mm Inscribed circle / size: 13 mm Special features Coated cermet grade GT9530 Chipbreaker: PF Plate shape: triangular Hole: cylindrical hole with single-side countersink (40°–60°) Material substrate: cemented carbide Application: finish to light turning of steel ISO-standardised insert FAQ Is this insert suitable for turning stainless steel? TPMT130304-PF GT9530 is designed primarily for steel finishing; it can be used on many stainless steel grades when machining parameters and a stable setup are maintained, but performance depends on the specific alloy and cutting conditions. Which holders are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; match a triangular ISO turning holder designed for 13 mm inscribed size and 3.18 mm plate thickness. What advantages does the GT9530 grade bring compared with standard carbide? The GT9530 coated cermet offers improved wear resistance and a superior surface finish in finishing and light turning operations, resulting in longer edge life and reduced rework on parts. How does the hole and countersink affect mounting? The cylindrical hole with a single-side countersink (40°–60°) provides secure seating and repeatable clamping, which reduces micro-movement and contributes to stable cutting and consistent part accuracy. What chipbreaker should be chosen for general applications? The PF chipbreaker indicated on the insert is intended for controlled chip formation in finishing and light turning; it supports good chip control when paired with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant coated cermet grade and a precision PS chipbreaker for improved surface finish and extended tool life; ISO compatibility and a secure mounting geometry ensure reliable performance in stable turning setups. Order the insert via Metav Werkzeuge or consult the technical team for application advice. TPMT130304-PS GT9530 — ISO triangular turning insert, coated cermet, Tungaloy A TPMT130304-PS GT9530 triangular ISO insert designed for finishing to light universal turning of steel, offering consistent surface quality and longer tool life in stable machining conditions Coated cermet grade GT9530 PS chipbreaker for stable cutting Triangular 60° insert, 0.4 mm radius ISO 130304 form, 3.18 mm thickness Consistent finishing and extended tool life through material and geometry The insert is engineered around a coated cermet cutting material that prioritises wear resistance and an improved surface finish in steel turning. The GT9530 grade combines a fine ceramic matrix with metallic binders to maintain edge integrity at low to moderate cutting speeds, which translates into fewer interruptions for edge changes and a longer production run between interventions. The PS chipbreaker supports stable chip control in finishing passes, reducing vibration and enabling repeatable part quality for batch production. Secure clamping and ISO compatibility for predictable tool performance Geometry and dimensional standards follow the ISO designation to ensure compatibility with a wide range of toolholders: the insert is supplied in the ISO 130304 form with a 60° included angle and a 3.18 mm plate thickness. The triangular form and the central hole with a countersink permit reliable fixation and consistent seat position on the holder, which reduces the risk of misalignment and ensures repeatable cutting conditions. These mechanical attributes contribute directly to process stability and predictable component tolerances. Practical application guidance and machining scope Optimised for turning steel in finishing to light universal operations, the insert performs best under stable setups where moderate feeds and finishing cut depths are used. The 0.4 mm nose radius supports fine surface textures while maintaining sufficient strength for typical finishing passes. For machinists seeking improved surface quality with extended edge life, this indexable insert offers a balance between precision and durability; selection of the correct feed, speed and tool overhang will further enhance the benefits of the GT9530 material and the PS chip geometry. For precision finishing with Tungaloy inserts, contact Metav Werkzeuge for availability and detailed application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6998375 Manufacturer SKU: TUN6998375 Stock SKU: 6998375-Tungaloy Model series: ISO turning indexable inserts Designation: TPMT130304-PS GT9530 Material: cemented carbide Facts Nose radius: 0.4 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Inscribed circle / size: 13 mm Special features Coated cermet grade GT9530 PS chipbreaker Triangular insert shape Cylindrical hole + single-side countersink (40°–60°) Application: Turning (finishing to light universal) ISO 130304 compatibility Good surface finish and extended tool life under stable conditions Manufacturer: Tungaloy FAQ What materials is this insert intended for? The TPMT130304-PS GT9530 from Tungaloy is specified for machining steel, with the GT9530 grade offering wear resistance suited to finishing and light universal turning of steel components (SKU 6998375-Tungaloy). Which holders are compatible with this ISO insert? Compatibility depends on ISO 130304 form, the 60° included angle and plate thickness; the insert is designed to fit ISO-compatible triangular holders and bar tool systems that accept the TPMT form. How does the PS chipbreaker affect machining? The PS chipbreaker promotes stable chip formation and evacuation in finishing cuts, which reduces vibration and improves surface quality when used in appropriate cutting conditions. What is the recommended nose radius for fine surface finishes? The insert features a 0.4 mm nose radius, which supports fine surface finishes while maintaining sufficient edge strength for finishing passes. Are replacement screws and clamping components required? The insert is supplied in the ISO form with a central hole and countersink; secure mounting requires the correct holder clamping set and suitable screw hardware to match the ISO seat and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130304 NS9530 PM Wendeplatten - Tungaloy
Product data inconsistent: the item is described both as Hartmetall (cemented carbide) and as an uncoated cermet cutting material, which are mutually exclusive specifications. This discrepancy creates confusion and makes it difficult to determine the correct material properties, performance characteristics, and potential applications of the product. Please review and correct the technical data to ensure clarity and consistency, as this will allow for a complete, accurate, and reliable product description to be generated, which is essential for customers and stakeholders to make informed decisions regarding its suitability for specific uses or operational requirements.
TPMT 130304 NS9530 PS Wendeplatten - Tungaloy
Combining the sharp edge geometry, low cutting forces of the NS9530 grade and the PS chipbreaker, this turning insert delivers consistent finishing performance and reduced rework. Secure procurement and technical support are available via Metav Werkzeuge for fast integration into production. TPMT 130304 NS9530 ISO triangular turning insert, 60° geometry — Tungaloy The TPMT130304-PS NS9530 is an ISO-standard triangular turning insert optimised for finishing steel, designed for continuous cuts and high surface quality. ISO triangular insert, 60° geometry Uncoated cermet grade NS9530 PS chipbreaker for continuous cutting 0.4 mm corner radius for fine finish Precision finishing with low cutting forces The insert’s core benefit is its uncoated cermet composition in grade NS9530, which provides a sharp cutting edge and low friction during continuous turning operations. This results in reduced cutting forces and improved surface integrity on steel components, meaning fewer secondary operations and shortened cycle times. The combination of material and geometry targets finishing applications where surface quality and dimensional stability are priorities, ensuring parts leave the lathe with a consistent finish and minimal burr formation. System compatibility and straightforward toolset management As an ISO-standard insert, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the series is supplied for use with matching external holders or boring bars together with support pads, clamp sets and replacement screws. The insert features a 60° triangle and an 11° relief angle, with a cylindrical hole and one-sided countersink (40°–60°) for secure clamping. This standardisation reduces tool inventory complexity and simplifies re-indexing, enabling shops to maintain throughput with familiar toolholding systems and predictable mounting repeatability. Stable process behaviour and surface-focused geometry The integrated PS chipbreaker is tuned for continuous-cut conditions and small depths of cut, promoting consistent chip control and stable cutting forces. The 0.4 mm corner radius aids in achieving fine surface finishes while preserving edge life, and the 3.18 mm plate thickness contributes to stiffness during interrupted cuts. For turning operations on steel where finishing quality and process reliability matter, this insert balances edge sharpness with operational robustness to support predictable production runs. Contact Metav Werkzeuge for application-specific advice on Tungaloy TPMT130304-PS NS9530 inserts and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998550 Manufacturer SKU: TUN6998550 SKU: 6998550-Tungaloy Model series: ISO turning indexable inserts Designation: TPMT130304-PS NS9530 Facts Size: 13 mm Thickness: 3.18 mm Cutting angle: 60° Relief angle: 11° Corner radius: 0.4 mm Special features Grade: NS9530 (uncoated cermet) Chipbreaker: PS Plate form: triangular Hole: with cylindrical hole + one-sided countersink (40°–60°) Application: turning; finishing of steel FAQ What materials is this insert suitable for? The TPMT130304-PS NS9530 insert from Tungaloy is specified as a finishing grade for steel; the uncoated cermet composition is optimised for continuous cutting on steel components. How does the PS chipbreaker affect machining? The PS chipbreaker on the Tungaloy TPMT130304-PS promotes stable chip formation during continuous cuts, improving process stability and contributing to consistent surface finish. What does the 0.4 mm corner radius mean for surface quality? A 0.4 mm corner radius offers a balance between sharpness and strength, helping the TPMT130304-PS to produce fine surface finishes while maintaining acceptable edge life on finishing passes. Which holders fit this ISO insert? Compatibility is governed by the ISO form, relief angle (11°), tolerance class, fastening, size and thickness; the TPMT130304-PS fits holders and boring bars designed for ISO triangular turning inserts with the stated dimensions. Is the insert suitable for small depths of cut and continuous turning? Yes, the NS9530 grade and PS chipbreaker are tailored for continuous turning with small depths of cut, prioritising low cutting forces and high surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com