TPMT 130308 AH725 Wendeplatten - Tungaloy
Reliable, PVD-coated AH725 grade and precise 60° triangular geometry combine to deliver consistent productivity and enhanced process security in turning operations. Order the TPMT130308-PS AH725 directly via Metav Werkzeuge or consult the technical advisers for holder compatibility. TPMT 130308 AH725 – Turning indexable insert (ISO) by Tungaloy A TPMT 130308 AH725 triangular ISO indexable insert designed for external and internal turning, offering a universal, fracture‑resistant PVD‑coated carbide grade for mixed material machining. PVD-coated carbide grade AH725 Universal for Stahl and rostfreier Stahl 60° triangular geometry for stable turning 0.8 mm corner radius for fine finishes High uptime through material and coating choice The combination of a PVD-coated surface and the AH725 carbide grade is aimed at stable chip formation and extended edge life when machining a range of materials. This optimises production time by reducing unplanned tool changes and supports predictable tool life, which is particularly valuable in mixed‑material lots. The design promotes process security and helps to maintain component tolerances with fewer interventions. Compatibility that simplifies tool selection The ISO indexable format ensures straightforward integration into standard tool holders; compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness. The triangular 60° geometry and the specified hole style facilitate secure clamping and repeatable seating in holders. Clear specification of dimensions and fit reduces set‑up time and minimises the risk of incorrect mounting, helping to maintain consistent cycle times. Precision edge form for fine finishing and strength With a 0.8 mm corner radius, the insert balances edge strength and surface finish capability. The moderately rounded corner supports higher feed options than a sharp edge while still achieving good surface quality in finishing passes. The PS chipbreaker supports controlled chip breaking across a variety of turning tasks, so fewer interruptions for chip management are required and surface integrity is preserved. Practical guidance for productive turning This insert is intended for turning (external and internal) where reliability and adaptability are priorities. Select the TPMT 130308 AH725 variant to harmonise cutting data across Stahl and rostfreier Stahl workpieces and to reduce tool change frequency. For confirmation of holder compatibility or cutting data recommendations, technical advisers are available and supply of replacement screws and clamping sets is straightforward through the tooling system. Contact Metav Werkzeuge today to secure TPMT130308-PS AH725 inserts or to request a compatibility check with existing holders and bores Technical data Article number: 6856682 Manufacturer SKU: TUN6856682 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Label: TPMT130308-PS AH725 Numbers / Core technical data Geometry angle: 60° Corner radius: 0.8 mm Insert thickness: 3.18 mm Insert size: 13 mm Relief angle: 11° ISO code: 130308 Special features / Versions Coating: PVD Grade: AH725 (universal, fracture-resistant) Chipbreaker: PS Insert shape: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Drehen (external and internal turning) ISO-standard insert for compatible holders FAQ What materials is this insert suitable for? The TPMT130308-PS AH725 insert is specified for machining Stahl and rostfreier Stahl and performs well where mixed material batches require a universal, fracture-resistant grade. Which insert geometry does the product use and what is its benefit? The product features a triangular 60° geometry that provides stable turning performance and secure clamping in standard ISO tool holders. What is the corner radius and how does it affect surface finish? The corner radius is 0.8 mm; this radius offers improved edge strength while enabling a fine surface finish in many finishing and semi-finishing operations. How is the insert held in the tool and what is the hole design? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for positive, repeatable clamping in compatible holder systems. What identifiers should be used when ordering spare inserts? Order using the manufacturer article number 6856682 or the manufacturer SKU TUN6856682 to ensure delivery of TPMT130308-PS AH725 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of coated cermet performance, precise geometry and secure clamping that delivers consistent surface quality and predictable tool life; order directly via Metav Werkzeuge or consult their technicians for holder and clamp recommendations. TPMT 130308 AT9530 ISO turning insert — finishing for turning applications, 60° triangle, Tungaloy TPMT 130308 AT9530 is an ISO-format indexable insert developed for finishing and light turning of steel, optimised for high surface quality and uniform wear. Coated cermet grade AT9530 for finish turning Triangle 60° geometry for versatile turning 0.8 mm corner radius for improved surface quality Cylindrical hole with single-side countersink Achieve consistent surface finish with a coated cermet grade The coated cermet composition of this insert is designed specifically for finish and light machining of steel, offering a combination of hardness and toughness that promotes a fine surface. The coating reduces adhesive wear and helps maintain cutting-edge integrity, which translates into uniform wear and fewer variances across serial production. For operations where surface integrity matters, this insert reduces the need for secondary finishing and supports predictable machining outcomes. Stable cutting geometry for repeatable results The 60° triangular geometry and 0.8 mm corner radius provide a stable cutting edge that balances strength and finish capability. The plate’s 3.18 mm thickness contributes to rigidity, while the cylindrical hole with a single-side countersink (40°–60°) ensures secure seating and repeatable clamping in standard ISO holders. Compatibility with a holder depends on form, rake angle, tolerance class, fastening and size, so selecting a matching external holder or boring bar is essential to maintain the designed cutting parameters. Clear application scope and material suitability Engineered for steel machining, the insert suits finishing passes and light cuts where surface quality is the priority. The PS chipbreaker supports predictable chip formation in these conditions, lowering the risk of built-up edge and improving process stability. The cermet substrate is less tolerant of heavy interrupted cuts than tougher grades, so the insert excels when process stability and surface integrity are the deciding factors for productivity and part quality. Practical system assembly and productivity advantages The insert is part of a standard ISO insert system and is intended to be used with a compatible external holder or boring bar, plus an appropriate shim/clamp set and replacement screws. This modular approach enables rapid index changes and straightforward tool maintenance, contributing to lower downtime and efficient tool management. With a focus on surface finish and even wear, the component supports higher first-pass acceptance rates and reduced rework, improving overall shop-floor throughput. For precision finishing and consistent tool life, request TPMT130308-PS AT9530 from Metav Werkzeuge or contact Metav Werkzeuge’s technical team for tailored holder and clamping recommendations. Technical data Article number: 6726491 SKU: 6726491-Tungaloy Manufacturer SKU: TUN6726491 Item name: TPMT130308-PS AT9530 Numbers / Core technical data Insert angle: 60° Corner radius: 0.8 mm Thickness: 3.18 mm Inscribed circle / size: 13 mm ISO code: 130308 Hole style: with hole Countersink angle: 40°–60° Grade: AT9530 Designs / Special features Coated cermet grade AT9530 PS chipbreaker for finishing Triangle (three-edged) insert form ISO-standard turning insert Application: finishing and light turning of steel System components: matching external holder or boring bar, shim/clamp set and replacement screws Compatibility determined by form, rake/freiwinkel, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This insert is optimised for finishing and light machining of steel, using the AT9530 coated cermet to improve surface finish and wear uniformity. How does the insert secure in the holder? Clamping is achieved via the cylindrical hole with a single-side countersink (40°–60°); correct seating requires a compatible ISO external holder and appropriate clamp or shim. Which chipbreaker is integrated and what does it do? The insert uses a PS chipbreaker, designed to form short, controllable chips during finishing cuts, aiding process stability and surface quality. Can the insert be used for heavy or interrupted cuts? The cermet substrate and finish-focused geometry are optimised for light to finishing cuts; heavy or highly interrupted operations may cause premature damage compared with tougher grades. What is the article number and SKU for ordering? The article number is 6726491 and the SKU is 6726491-Tungaloy; reference these when requesting TPMT130308-PS AT9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 GT9530 PS Wendeplatten - Tungaloy
The product data contains a contradiction: one entry lists "Hartmetall" (carbide) while another specifies a coated cermet grade (GT9530). Please verify the cutting material and grade before proceeding, as this discrepancy could lead to confusion or errors during the selection or application process, potentially affecting performance, compatibility, or overall results. It is essential to ensure that the correct material and grade are identified and confirmed to avoid any issues that might arise from using the wrong specifications, which could compromise the quality, durability, or efficiency of the product in its intended use or operational environment.
TPMT 130308 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade, precise geometry and ISO compatibility to improve surface quality and extend tool life. Order the insert directly via Metav Werkzeuge or consult the specialists if selection assistance is required. TPMT 130308 GT9530 triangular turning insert — coated cermet, PSS chipbreaker, 0.8 mm radius — Tungaloy TPMT 130308 GT9530 is a triangular ISO turning insert for finishing to light universal turning of steel, designed to deliver improved surface finishes and longer tool life under stable cutting conditions. ISO triangular turning insert TPMT 130308 GT9530 Coated cermet grade GT9530 for longer life PSS chipbreaker for reliable chip control 0.8 mm corner radius for fine finishes 11° clearance angle; with cylindrical hole & countersink Consistent finishing performance for stable turning operations The TPMT 130308 GT9530 is engineered as a finishing to light universal-turning solution with a coated cermet cutting material that prioritises surface quality and wear resistance. The grade is optimised for steel, where consistent cutting conditions and tool support produce the best returns. The combination of the cermet coating and the insert geometry reduces flank wear and helps maintain dimensional stability over longer tool life, which in turn raises process efficiency and lowers downtime. Geometry that improves surface finish and chip control A specifically chosen 0.8 mm corner radius and the PSS chipbreaker deliver two clear benefits: improved surface integrity and controlled chip formation. The moderate corner radius produces a fine machined profile without aggressive loading, while the PSS breaker channels chips predictably for safer evacuation. The 11° clearance angle reduces rubbing at the flank and further protects the cutting edge, enabling reproducible finishes in serial production and minimising rework. ISO compatibility and system integration for reliable clamping Designed to the ISO plate family, the insert’s form, relief angle, tolerance class, attachment method, size and thickness determine holder compatibility. The system build typically comprises an ISO insert, a matching external holder or boring bar, an underlay/clamp set and replacement fixing screws. The insert’s triangular shape and 13 mm size suit many standard toolholders, while the cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and accurate seating in the pocket — a prerequisite for repeatable turning results. Coating and substrate combine for extended productivity The GT9530 coated cermet substrate is a wear-resistant finishing to light universal grade that balances surface quality with durable edge life under steady conditions. Coated cermet offers lower built-up edge tendency and improved heat resistance compared with uncoated grades, making it suitable where a superior finish is required alongside reliable performance. Production engineers seeking to increase machining uptime without sacrificing finish will value this balance, and technical advisors can advise on optimal chipbreaker and holder choices for specific setups. For selection advice or to secure Tungaloy inserts such as the TPMT 130308 GT9530 for upcoming turning operations, contact Metav Werkzeuge by email or phone — specialists will assist with grade selection and holder compatibility. Technical data Article number: 6998363 Manufacturer SKU: TUN6998363 Label: TPMT130308-PSS GT9530 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Special features ISO designation: TPMT130308-PSS Grade/coating: GT9530 (coated cermet) Chipbreaker: PSS Plate form: triangular Hole: with cylindrical hole and one-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert best suited for? The GT9530 coated cermet grade is optimised for steel machining; the TPMT 130308 GT9530 insert is designed for finishing to light universal turning where a high-quality surface and longer tool life are required. Which chipbreaker is fitted and what benefit does it provide? The insert uses the PSS chipbreaker, which promotes predictable chip formation and safer evacuation, improving tool life and surface integrity during stable turning operations. How is holder compatibility determined for this ISO insert? Compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness; the TPMT130308-PSS follows ISO rules for triangular inserts and seats with a cylindrical hole plus countersink. What pocket and clamping features are required for reliable seating? A matching holder with a compatible pocket and clamp set is required; the cylindrical hole with one-sided countersink (40°–60°) secures seating and accurate alignment for repeatable results. Is this insert suitable for deep roughing cuts? This grade is a wear-resistant finishing to light universal sort; it is intended for finishing and light turning rather than heavy roughing where different grades and geometries are typically used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, ISO compatibility and a finely balanced geometry for consistent finishing results; order directly via Metav Werkzeuge or consult the team for application-specific advice. TPMT 130308 GT9530 — ISO triangular turning insert by Tungaloy (for turning) TPMT130308-PM GT9530 is an ISO-standard triangular indexable insert designed for finishing and light general-purpose turning on steel, offering a balance of surface quality and extended tool life under stable cutting conditions. ISO-standard triangular insert Coated cermet grade GT9530 0.8 mm corner radius for fine finishing 11° clearance angle; 3.18 mm thickness Consistent finishing through a coated cermet substrate The coated cermet composition of this grade ensures improved surface finish and extended tool life in finishing operations. Cermet combines ceramic hardness with metal toughness, which reduces built-up edge and produces a finer machined surface compared with conventional grades; this is particularly notable in stable turning setups where vibration is limited. The PM-style chipbreaker supports predictable chip formation, helping to maintain dimensional integrity during both external and internal turning tasks. The result is fewer interruptions for regrinding or replacement and a more economical machining cycle. Reliable mounting and geometry for stable cutting performance Designed to the ISO-standard, compatibility with holders depends on shape, clearance angle and tolerance class; the insert’s 11° clearance angle and 3.18 mm plate thickness contribute to mechanical stability in the clamping zone. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure locating and clamping, which reduces micro-movements during cutting. These geometric choices minimise vibration and make the grade a dependable option when a secure, repeatable interface between insert and toolholder is required. Practical machining advantages and recommended usage With a 0.8 mm corner radius, the insert is optimised for fine finishing where edge strength and surface integrity matter. The GT9530, a coated cermet grade, is intended for finishing to light universal applications on steel, giving a compromise between wear resistance and edge sharpness. For best results, pair the insert with a holder that matches form, free angle and tolerance; select the chipbreaker and grade to suit material, cut type and machine rigidity. The predictable performance reduces scrap rates and contributes to higher first-pass yields in production environments. Simple system setup and service considerations The insert is part of a system consisting of the ISO indexable plate, an appropriate external holder or boring bar, an underlay/clamping kit and spare screws — all contributing to a rapid exchange workflow. Using the correct underlay and torque for the clamping screws preserves the insert’s seating and extends service life. For shops that prefer standardised tooling, the ISO conformity supports straightforward stock management and rapid replacement without bespoke adaptors, thereby lowering downtime and supporting continuous production. Contact Metav Werkzeuge today for tailored cutting recommendations and to arrange supply of Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998381 Manufacturer SKU: TUN6998381 Product label: TPMT130308-PM GT9530 SKU: 6998381-Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 3.18 mm Inscribed circle / size: 13 mm Included angle: 60° Special features Coated cermet grade GT9530 Chipbreaker style: PM Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Material: carbide Series: ISO turning indexable inserts Typical application: external and internal turning FAQ What materials is this insert suited for? The TPMT130308-PM GT9530 is a coated cermet insert optimised for machining steel in finishing to light universal operations. How does the PM chipbreaker influence machining? The PM chipbreaker on the GT9530 grade promotes controlled chip formation and improved surface quality during turning operations with stable setups. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness; use an ISO-compatible external holder or boring bar sized for a 13 mm inscribed circle. What benefits does the 0.8 mm corner radius offer? A 0.8 mm corner radius balances edge strength and finishing capability, producing finer surfaces while maintaining adequate wear resistance for light turning tasks. Is the insert supplied with mounting hardware? The system requires a suitable underlay/clamping set and replacement screws; these are part of the tool system rather than the individual insert supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 NS9530 PM Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet insert with a sharp cutting edge and low cutting forces to improve surface finish and process stability; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 130308 NS9530 — ISO triangular turning insert by Tungaloy with 0.8 mm corner radius and 11° relief A TPMT 130308 NS9530 insert for precision turning, designed for fine finishing of steel components in continuous cuts ISO triangular form, 13 mm inscribed circle Uncoated cermet NS9530 finishing grade Sharp edge for excellent surface finish 11° relief angle for low cutting forces Improved surface quality and predictable finishing results The insert is specified as an uncoated cermet grade NS9530, optimised as a finishing grade for steel. The combination of a sharp cutting edge and the cermet substrate produces low cutting forces, resulting in reduced tool-induced vibration and consistently better surface integrity on turned parts. For jobs that require small depths of cut and continuous material engagement, this geometry supports stable metal removal and a predictable part finish. Designed for reliable fitment and clamping in ISO systems Compatibility with toolholders is governed by geometry, clearance, tolerance class, fastening, size and thickness; the ISO format ensures straightforward matching to standard clamping systems. The triangular shape and the specified mounting hole (cylindrical with a one-sided countersink 40°–60°) permit secure indexing and repeatable positioning. This reduces set-up time and minimises the need for readjustment during production, supporting a smooth workflow in batch and single-piece manufacturing. Edge geometry and dimensions that reduce cycle times With a 0.8 mm corner radius, an 11° relief angle and an inscribed circle of 13 mm, the insert balances edge strength with the ability to generate a fine contact line for finishing passes. The modest thickness of 3.18 mm contributes to stiffness in the clamped assembly while keeping the insert profile compatible with compact holders. These dimensional choices can translate into faster finishing passes and less need for secondary operations when process parameters are aligned to the grade and chipbreaker. Material match and application guidance for machinists The substrate material and chipbreaker designation PM indicate suitability for continuous cutting modes and small feed rates typical of finishing operations. The grade’s low tendency for built-up edge and its sharp geometry make it appropriate where low cutting forces and excellent surface finish are priorities. Select a holder and cutting data that respect the insert’s intent as a finishing solution for steel to obtain the expected performance and tool life. Contact Metav Werkzeuge today to discuss how the Tungaloy finishing insert can optimise the turning process in a production environment and to arrange tailored application support from our consultants. Technical data Manufacturer article number: 6998557 SKU: 6998557-Tungaloy Model series: ISO turning inserts Core dimensions Inscribed circle: 13 mm Corner radius: 0.8 mm Thickness: 3.18 mm Relief angle: 11° Included angle: 60° Features and materials Material: carbide substrate (Hartmetall) Cutting material: uncoated cermet NS9530 Chipbreaker: PM (finishing) Shape: triangular Mounting: with hole — cylindrical hole + one-sided countersink (40°–60°) Application: turning FAQ What materials is this insert intended to machine? The NS9530 finishing grade is tailored for machining steel; the insert excels in continuous cuts and small depths of cut where fine surface quality is required. How is holder compatibility determined for this insert? Compatibility depends on the ISO geometry: form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures the insert fits and clamps correctly. How does the chipbreaker affect performance? The PM chipbreaker is a finishing-style geometry that promotes stable chip flow in continuous cutting, supporting low cutting forces and improved surface finish. How many times can the insert be indexed? The triangular shape provides multiple cutting edges; indexing count is determined by wear and the integrity of the cutting edge rather than the insert geometry alone. Which part number should be referenced when ordering? Use the manufacturer article number 6998557 or SKU 6998557-Tungaloy when enquiring about the TPMT 130308 NS9530 finishing insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 NS9530 Wendeplatten - Tungaloy
Take advantage of a combination of high-quality surface finish, low cutting forces and ISO compatibility to streamline finishing operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. TPMT130308-PF NS9530 – triangular ISO turning insert for finishing, cermet grade by Tungaloy TPMT130308-PF NS9530 is a finishing insert designed for turning operations, offering a sharp cutting edge and optimised chip control for continuous cuts in steel Triangular 60° geometry for versatile turning Sharp cutting edge for superior surface finish PF chipbreaker for controlled chip flow 0.8 mm corner radius for fine finishing Exceptional finish quality from an uncoated cermet grade The insert uses an uncoated cermet grade engineered to deliver a consistently high surface finish on steel during finishing passes. The combination of a sharp cutting edge and the low-friction behaviour of cermet reduces built-up edge and helps maintain dimensional accuracy across runs. For operations where small depths of cut and continuous feeds are common, this composition supports reduced rework and improved first-pass quality. Geometry and mounting that give predictable cutting behaviour Featuring a 60° triangular cutting geometry with a 0.8 mm corner radius and 11° clearance, the insert provides a reliable contact profile and stable engagement with the workpiece. The plate thickness of 3.18 mm contributes to stiffness, while the insert’s specification includes a hole with a cylindrical bore and a single-sided countersink (40°–60°), ensuring secure clamping and repeatable positioning in ISO-compatible holders. These mechanical details translate directly into stable cutting forces and consistent surface results. Purpose-built for finishing in steel with controlled chip formation This grade, NS9530, is a finishing specification tailored to turning steel, offering low cutting forces and a sharp edge for fine surface integrity. The PF chipbreaker is optimised for continuous cuts and small feeds, delivering reliable chip control that prevents tangling and minimises downtime for chip clearing. When combined with a properly selected holder and clamping set, the system supports predictable tool life and steady productivity. Practical benefits for workshop productivity and handling Adopting this ISO-format insert simplifies tooling logistics: standardised dimensions and hole style make it easy to match to existing holders, while the cermet grade reduces the tendency for work hardening and built-up edge in finishing tasks. The result is predictable tool life, improved throughput and a more cost-effective finishing process. For setups requiring tight tolerances and consistent surface quality, this insert contributes directly to lower rework rates and higher process reliability. For finishing operations that demand consistent surface quality with low cutting forces, request application support from Metav Werkzeuge or place an order through Metav Werkzeuge for tailored recommendations and availability: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6998527 SKU: 6998527-Tungaloy Manufacturer SKU: TUN6998527 Product designation: TPMT130308-PF NS9530 Model series: ISO turning inserts Facts Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Chipbreaker: PF Body material: cemented carbide substrate Typical application: finishing turning in steel Compatibility: ISO-form inserts for standard turning holders FAQ What applications is this insert best suited for? The NS9530 cermet grade is intended primarily for finishing turning in steel; the TPMT130308-PF excels at continuous cuts and small depths of cut where surface quality is critical. How does the PF chipbreaker influence performance? The PF chipbreaker on this insert promotes consistent chip control during finishing feeds, reducing the risk of chip entanglement and helping to maintain a clean cutting zone for reliable surface finish. Which holder features are required for correct mounting? Secure clamping with a matching ISO-compatible triangular pocket and the correct screw/underlay set is required; the insert’s cylindrical hole and single-sided countersink ensure repeatable seating and alignment in standard holders. Can this insert handle interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts; for heavily interrupted machining, a different grade or geometry may be preferable to protect the cutting edge and preserve tool life. What cutting geometry details affect finish and stability? The combination of the 60° included angle, 0.8 mm corner radius and 11° clearance delivers a stable contact edge and fine finishing capability with predictable cutting forces for high-quality surfaces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of ISO conformity, a cermet NS9530 finishing grade and a precise 0.8 mm corner radius for reliable surface quality and gentle cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT 130308 NS9530 — ISO triangle turning insert for finishing (Drehen), Tungaloy The TPMT130308-PSS NS9530 is an ISO-compliant triangle insert designed for external and internal turning, optimised as a finishing grade for steel with continuous cuts and small depth of cut. ISO triangle form for standardised holders Cermet NS9530 for excellent surface finish Low cutting forces for continuous finishing cuts 0.8 mm corner radius for precision edges Engineered for consistent finishing and low cutting forces This insert combines an uncoated cermet NS9530 grade with a sharp cutting edge to deliver low cutting forces and an improved finish when machining steel. As a finishing solution, the geometry reduces the load on the tool and the workpiece, which helps achieve tighter dimensional tolerances and a finer surface without the need for extensive secondary operations. The combination of grade and geometry is particularly suited to stable setups and continuous cutting where surface integrity is a priority. Geometry and clamping designed to simplify tool selection The insert is ISO-compliant, which streamlines holder compatibility because form, 11° clearance, tolerance class, attachment and thickness are standardised. The PSS chipbreaker is matched to the finishing application to control chips in small depths of cut, while the cylindrical hole with single-side countersink (40°–60°) supports secure clamping and repeatable positioning. Critical dimensions such as the 60° included angle, 3.18 mm thickness and 0.8 mm corner radius are selected to balance edge strength with the ability to produce fine surface finishes. Practical advantages in production and process planning Using this insert for turning reduces the need for post-machining and supports predictable process windows, which benefits cycle time and downstream handling. The cemented carbide substrate offers stable edge retention for finishing passes in steel, and the combination of grade and chipbreaker reduces risk of built-up edge under continuous cutting. For best results, select a holder and clamping system compatible with ISO TPMT geometry and verify insert seating and seat tolerance to ensure repeatability in serial production. For tailored cutting data, holder compatibility checks and availability of the Tungaloy TPMT130308-PSS NS9530 finishing insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998539 Manufacturer SKU: TUN6998539 SKU: 6998539-Tungaloy ISO designation: TPMT130308-PSS Core Data Thickness: 3.18 mm Inscribed circle/size: 13 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Versions / Special features Material: cemented carbide Grade: NS9530 (uncoated cermet) Chipbreaker: PSS Plate form: triangular Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Application: Turning Model series: ISO turning inserts Use case: finishing for steel FAQ What materials is this insert intended for? The TPMT130308-PSS NS9530 is a finishing-grade insert developed primarily for machining steel; the NS9530 cermet provides a sharp edge and improved surface quality in continuous finishing cuts. Which holders are compatible with this triangle insert? Compatibility depends on ISO triangular insert seats that match the TPMT form, 11° clearance, thickness 3.18 mm and the 13 mm inscribed circle; ensure the holder accepts a TPMT-style insert and the specified clamping arrangement. How does the PSS chipbreaker influence machining? The PSS chipbreaker is designed to promote controlled chip formation in finishing operations, reducing the tendency for long stringy chips and helping to maintain a consistent surface finish during small depth cuts. Is the TPMT130308-PSS NS9530 suitable for internal turning? Yes, the geometry and NS9530 finishing grade make this insert suitable for internal and external turning where fine surface quality and low cutting forces are required; verify holder reach and rigidity for internal applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 NS9530 Wendeplatten - Tungaloy
TPMT 130308 NS9530 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die TPMT 130308 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen mit feiner Schlichtung Unbeschichtetes Cermet für feines Schlichten Hohe Oberflächengüte bei kontinuierlichem Schnitt ISO-genormt, kompatibel mit Standardhaltern Eckenradius 0,8 mm für feine Konturen Freiwinkel 11° für stabile Schnittbedingungen Präzision beim Schlichten sichern Die TPMT 130308 NS9530 nutzt ein unbeschichtetes Cermet, das speziell für Schlichtanwendungen an Stahl entwickelt wurde. Durch die scharfe Schneidkante entstehen niedrige Schnittkräfte und eine ausgezeichnete Oberflächengüte, sodass Nachbearbeitungen reduziert werden können. Für Anwender bedeutet das weniger Schleifaufwand und gleichbleibend hohe Maßhaltigkeit bei kontinuierlichen Schnitten. Normkonforme Kompatibilität reduziert Rüstzeiten ISO-Genormte Abmessungen und die dreieckige Plattenform erlauben einfache Integration in gängige Außenhalter und Bohrstangen. Der Freiwinkel 11° und die Toleranzklasse sorgen für reproduzierbare Spann- und Lageverhältnisse, wodurch Montagefehler minimiert und die Rüstzeit verkürzt werden. So lässt sich die Wendeschneidplatte schnell im System austauschen und produktiv einsetzen. Geeignet für typische Schlichtaufgaben an Stahl Als Schlichtsorte bietet die Serie NS9530 Vorteile bei kleinen Zustellungen und kontinuierlichem Vorschub. Die Platte ist besonders empfohlen für Außen- und Innendrehen, wenn hohe Oberflächengüten gefordert sind. Für weniger erfahrene Anwender: Schlichtsorte bedeutet, dass die Platte hohe Präzision bei geringem Materialabtrag liefert und daher nicht für grobe Schrupparbeiten vorgesehen ist. Aufbau, Montage und wirtschaftlicher Einsatz Der Systemaufbau besteht aus ISO-Drehplatte, passendem Außenhalter oder Bohrstange sowie Unterlage und Klemmsatz; Ersatzschrauben sind Teil typischer Ersatzteillogistik. Hartmetall-Werkstoffe sorgen für verschleißfeste Performance, während der Spanbrecher 24 eine kontrollierte Spanbildung unterstützt. Insgesamt ermöglicht die Kombination aus Materialwahl und Geometrie eine effiziente und wiederholgenaue Bearbeitung, die Standzeit und Prozesssicherheit erhöht. Empfehlung: Die TPMT 130308 NS9530 von Tungaloy eignet sich hervorragend für präzise Schlichtaufgaben an Stahl; bei Fragen zur Anwendung oder zur Auswahl der passenden Halter beraten die Experten von Metav Werkzeuge gern unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Leistungsmerkmale Artikelnummer: 6998563 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: TPMT130308-24 NS9530 SKU Hersteller: TUN6998563 Fakten Eckenradius: 0,8 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 3,18 mm Plattengröße: 13 mm Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 Spanbrecher: 24 Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: dreieckig Einsatz: Drehen Typische Anwendung: Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit der TPMT130308-24 NS9530 bearbeiten? Die TPMT130308-24 NS9530 von Tungaloy ist primär für Stahl ausgelegt und liefert bei Schlichtbearbeitung besonders gute Oberflächengüten. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja. Die ISO-Genormung der TPMT 130308 NS9530 sorgt für Kompatibilität mit gängigen Außenhaltern, wobei Form, Freiwinkel und Dicke zu prüfen sind. Wofür steht die Sorte NS9530? Die Sorte NS9530 kennzeichnet eine Schlichtsorte auf Cermet-Basis, entwickelt für scharfe Schneidkanten, niedrige Schnittkräfte und feine Oberflächen. Wie beeinflusst der Eckenradius 0,8 mm die Bearbeitung? Der Eckenradius 0,8 mm ermöglicht feine Konturen und reduziert das Risiko von Kerbwirkungen; er ist besonders geeignet für präzise Maßhaltigkeit und glatte Oberflächen. Welche Artikelnummer oder SKU hat die Wendeplatte? Die Artikelnummer lautet 6998563 und die Herstellersku ist TUN6998563 für die ISO-Drehwendeschneidplatte TPMT130308-24 NS9530 von Tungaloy. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 130308 NS9530 Wendeplatten - Tungaloy
TPMT 130308 NS9530 – Drehen | Tungaloy Die TPMT 130308 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtbearbeitung von Stahl und eignet sich besonders für kontinuierliche Schnitte mit kleinen Zustellungen. ISO-genormte Form für Halterkompatibilität Schlichtsorte NS9530 für hohe Oberflächengüte Unbeschichtetes Cermet mit scharfer Schneidkante Eckenradius 0,8 mm für präzise Feinbearbeitung Dreieckige Platte mit zylindrischem Loch und Senkung Hartmetall und Cermet für optimale Schlichtqualität Die Kombination aus Hartmetall Basismaterial und unbeschichtetem Cermet der Sorte NS9530 sorgt für eine sehr scharfe Schneidkante und reduzierte Schnittkräfte. Dadurch entsteht eine gleichmäßig feine Oberfläche, was die Nachbearbeitung minimiert. Cermet ist ein Verbundwerkstoff aus keramischen und metallischen Phasen; er bietet hohe Verschleißfestigkeit bei gleichzeitig guter Zähigkeit und eignet sich speziell für Schlichtprozesse an Stahl. Effizienz im Prozess durch angepasste Geometrie Die geometrischen Daten wie Freiwinkel 11°, Winkel 60° und der geringe Eckenradius 0,8 mm wurden für kontinuierliche Schnitte konzipiert. Das Resultat ist eine stabile Spanbildung und konstante Schneidleistung bei kleinen Zustellungen. Anwender profitieren von gleichbleibender Bauteilqualität und reduzierten Ausschussraten, weil die Platte feine Oberflächen ohne hohe Schnittkraft liefert. Einfache Integration und sichere Spannlösung Das System setzt sich aus ISO-Drehplatte, passenden Außenhalter oder Bohrstange sowie Unterlage und Klemmsatz zusammen. Die dreieckige Plattenform mit zylindrischem Loch und einseitiger Senkung (40°–60°) gewährleistet wiederholgenaue Montage und stabile Kraftübertragung. Das bedeutet weniger Rüstaufwand und schnelle Wechselzyklen in der Werkstatt, wodurch Maschinenlaufzeiten effizienter genutzt werden. Zielgruppe und Anwendungsfelder Dieses Produkt richtet sich an Zerspanungsbetriebe, Lohnfertiger und Automotive-Werkstätten, die beim Schlichten von Stahl auf höchste Oberflächengüte und Prozesssicherheit achten. Die Platte ist besonders geeignet für Außen- und Innendrehen mit kleinen Zustellungen, wo präzise Kanten und konstante Ergebnisse gefragt sind. Wirtschaftliche Produktion entsteht durch lange Standzeiten und reproduzierbare Bearbeitungsergebnisse. Empfehlung: Für präzise Schlichtbearbeitung von Stahl die TPMT 130308 NS9530 von Tungaloy anfragen; technische Beratung und Verfügbarkeit bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998635 SKU: 6998635-Tungaloy Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TPMT130308-23 Daten Eckenradius: 0,8 mm Freiwinkel: 11° Winkel: 60° Plattendicke: 3,18 mm Plattengröße: 13 mm Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet NS9530: Schlichtsorte für Stahl, unbeschichtetes Cermet Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: 23 FAQ Ist die Platte für Innen- und Außenbearbeitung geeignet? Die TPMT 130308 NS9530 von Tungaloy eignet sich für Außen- und Innendrehen; die Geometrie von NS9530 ist auf Schlichtoperationen ausgelegt und liefert dabei hohe Oberflächengüte. Welche Werkstoffe können mit dieser Sorte bearbeitet werden? Die Sorte NS9530 ist speziell für Stahl optimiert. Das unbeschichtete Cermet ermöglicht niedrige Schnittkräfte und sehr feine Oberflächen bei kontinuierlichen Schnitten. Welchen Eckenradius hat die Platte und wofür ist das wichtig? Die Platte besitzt einen Eckenradius von 0,8 mm, ideal für präzise Feinbearbeitung und kleine Zustellungen, wodurch Bauteile enge Toleranzen besser einhalten. Wie erfolgt die Befestigung der Platte am Halter? Die TPMT130308-23 wird über das zylindrische Loch mit einseitiger Senkung (40°–60°) fixiert; passende Unterlage und Klemmsatz gewährleisten wiederholgenaue Spannung. Welche SKU hat dieses Produkt und wie ist die Herstellerbezeichnung? Das Produkt wird geführt unter SKU 6998635-Tungaloy und Herstellerartikelnummer 6998635; die Herstellerbezeichnung lautet TPMT130308-23 NS9530 von Tungaloy. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 130308 NS9530 Wendeplatten - Tungaloy
A finishing-grade, uncoated cermet NS9530 insert with a 0.8 mm corner radius and PS chipbreaker delivers low cutting forces and excellent surface finish for steel turning; benefit from consistent, repeatable results and order via Metav Werkzeuge or consult our technical team for application support. TPMT 130308 NS9530 turning insert — Tungaloy, triangular TPMT130308-PS TPMT130308-PS NS9530 is a triangular indexable insert engineered for finishing operations in turning, optimised for continuous cuts and high surface quality Uncoated cermet grade NS9530 Fine 0.8 mm corner radius PS chipbreaker for finishing ISO TPMT130308 form, 11° clearance Consistent finishing quality with lower cutting forces The uncoated cermet NS9530 grade is designed as a finishing solution for steel, combining a sharp cutting edge with low cutting forces to reduce workpiece deformation and improve dimensional stability. For light depths of cut and continuous cutting conditions, this insert reduces the need for secondary finishing, helping to shorten cycle times and lower overall machining costs. The sharp edge and brittle-adhesive wear behaviour of the grade produce a high surface finish, making it suitable for components where visual appearance and tight tolerances matter. Secure clamping and ISO compatibility for repeatable results The triangular TPMT130308 geometry, with an 11° clearance and a cylindrical hole with single-sided countersink (40°–60°), provides reliable mechanical clamping in compatible holders. The standardised form ensures straightforward matching to ISO-compatible toolholders; correct selection of holder, shim and clamp is essential to exploit the insert’s potential. The 3.18 mm plate thickness and 13 mm size give a stable platform for finishing cuts, while the 0.8 mm corner radius supports fine edge strength without compromising surface quality. Application guidance to maximise tool life and part quality For external and internal turning in continuous cut scenarios, the PS chipbreaker is optimised to control chip flow during finishing passes and to maintain a steady cutting zone. The insert performs best with small feedrates and modest depths of cut; stability of the setup and correct selection of the clamping system are decisive factors for repeatable tool life. Matching the insert to an appropriate holder and maintaining stable cutting conditions reduce tool wear and help achieve consistent tolerance adherence, resulting in higher first-pass yields and lower rework rates. For availability and tailored application advice on Tungaloy finishing inserts such as the NS9530 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 6998551 SKU: 6998551-Tungaloy Manufacturer SKU: TUN6998551 Model series: ISO turning indexable inserts Size: 13 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Geometry: TPMT130308-PS (triangular) Grade: NS9530 (uncoated cermet) Chipbreaker: PS (finishing) Hole: cylindrical hole + single-sided countersink (40°–60°) Material: cemented carbide Application: Turning (finishing for steel) FAQ Which materials is this insert intended for? The TPMT130308-PS NS9530 insert is formulated as a finishing grade for steel; the uncoated NS9530 cermet provides low cutting forces and a high-quality surface finish in continuous cutting conditions. Is the TPMT130308-PS coated or uncoated? This turning insert is an uncoated cermet (NS9530), chosen for its sharp cutting edge and suitability for finishing applications. How does the PS chipbreaker influence machining? The PS chipbreaker on this insert controls chip formation during finishing passes, supporting steady chip flow and improved surface quality when machining with small depths of cut. What clamping and holder features must be observed? Compatibility depends on the ISO TPMT130308 form, the 11° clearance, the 3.18 mm thickness and the hole/countersink configuration; match the insert to an ISO-compatible holder and correct clamping components for repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T6215 carbide grade and the PS chipbreaker for durable, process-stable turning of stainless steels; the 60° triangular shape and 0.8 mm corner radius support versatile external and internal operations. Order the TPMT130308-PS T6215 directly via Metav Werkzeuge or ask our consultants if needed. TPMT 130308 T6215 – ISO triangular turning insert, CVD-coated, 60° (Tungaloy) TPMT 130308 T6215 is an ISO-standard triangular insert engineered for productive external and internal turning of stainless steels under stable to lightly interrupted conditions. CVD-coated carbide grade T6215 for wear resistance Triangular 60° geometry for versatile turning PS chipbreaker tuned for stainless steel performance Longer tool life through optimised carbide and coating The combination of a CVD-coated surface and a wear-resistant carbide substrate (grade T6215) extends service intervals and reduces unplanned tool changes. CVD (chemical vapour deposition) forms a thin, hard layer that enhances thermal and abrasive resistance; this makes the insert particularly suitable for machining stainless steel where heat and adhesive wear can accelerate flank deterioration. The result is a measurable increase in tool life and repeatable component quality, which supports steady production rhythms and predictable tooling costs. Geometry and dimensions that support reliable machining A consistent 60° geometry and an 0.8 mm corner radius provide stable cutting engagement and a favourable balance between strength and edge definition. With a 3.18 mm thickness and a nominal inscribed circle of 13 mm, the triangular silhouette offers three usable cutting edges per index, improving cost-efficiency per edge. The 11° relief promotes secure clamping and reduces rubbing at the flank, while the central hole with cylindrical bore and a one-sided countersink (40°–60°) ensures compatibility with a wide range of ISO holders. These attributes combine to deliver predictable chip formation and reduced vibration during both external and internal turning. Chip control and process stability for stainless-steel turning The PS chipbreaker is designed to manage the characteristic long, ductile chips produced when machining stainless steels, promoting controlled fragmentation and reliable evacuation from the cutting zone. Controlled chip flow reduces the risk of surface damage and helps maintain consistent cutting forces, which in turn contributes to dimensional stability and surface finish. Where interrupted cuts occur, the insert’s robust edge geometry and the T6215 substrate help preserve the cutting edge, supporting repeatable performance across batch runs and small-series production. For application-specific advice on using Tungaloy CVD-coated inserts and for stock or delivery details, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations Technical data Article number: 6877048 Manufacturer SKU: TUN6877048 Shop SKU: 6877048-Tungaloy Designation: TPMT130308-PS T6215 Brand: Tungaloy Facts Inscribed circle / size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief / free angle: 11° Included angle: 60° Countersink angle: 40°–60° Special features CVD-coated carbide (grade T6215) PS chipbreaker for stainless-steel machining Triangular insert with central hole (cylindrical) and one-sided countersink ISO-standard turning insert suitable for external and internal turning Compatibility with holders depends on form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The TPMT130308-PS T6215 is optimised for machining stainless steels; the CVD coating and PS chipbreaker support wear resistance and chip control when turning rostfreier Stahl. How does the PS chipbreaker affect machining performance? The PS chipbreaker on the insert promotes controlled chip fragmentation for stainless-steel turning, improving evacuation and reducing the likelihood of surface damage during cutting. Can this insert be used for interrupted cuts? Yes, the T6215 substrate and the robust edge geometry of the TPMT130308-PS provide good resistance to shock loads, making it suitable for stable to lightly interrupted conditions. Which holder characteristics must be checked for compatibility? Compatibility is determined by the insert’s form, relief angle, tolerance class, clamping method, size and thickness; ensure the chosen holder matches these parameters for secure seating of the insert. What are the key dimensions to consider when specifying this insert? Key dimensions include the 13 mm inscribed circle, 3.18 mm thickness, 0.8 mm corner radius and the 60° included angle; these influence cutting engagement and holder selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, CVD-coated carbide grade combined with a reliable PSS chipbreaker and compact geometry for consistent turning results; order the insert directly from Metav Werkzeuge or consult our advisers for application support. TPMT 130308 T6215 TPMT — Turning insert, CVD-coated carbide, 0.8 mm radius — Tungaloy A TPMT130308-PSS T6215 ISO-format turning insert engineered for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 PSS chipbreaker for stainless-steel turning 0.8 mm corner radius for finishing ISO 130308 triangular insert, 3.18 mm thick Consistent tool life with a wear-resistant CVD coating The combination of a CVD-coated surface and a specially formulated carbide matrix gives the insert a wear-resistant edge suited to prolonged production runs when machining stainless steel. The PVD/CVD layer reduces abrasive wear and helps maintain cutting geometry over repeated indexings, which leads to fewer unplanned tool changes and more predictable cycle times. For operations where tool life and process consistency are priorities, this geometry and coating deliver measurable improvements in uptime. Geometry and clamping designed for secure, repeatable positioning The triangular ISO form (ISO 130308) with a 60° included angle and 11° relief provides both rigidity and easy indexability. The 0.8 mm radius balances edge strength with the ability to achieve fine surface quality in finishing passes. The insert is 3.18 mm thick and includes a cylindrical hole with a one-sided countersink (40°–60°), ensuring firm clamping in compatible holders and boring bars. Clear attention to tolerance and clamping design translates to repeatable seating and reduced vibration across batches. Predictable chip control for improved surface finish and process stability Equipped with the PSS chipbreaker, the insert promotes controlled chip formation when turning austenitic and other stainless steels, reducing the risk of long, stringy chips that interfere with workpiece handling. Controlled chip flow contributes directly to a better surface finish, safer chip evacuation and less downtime for manual clearing. Where stable cutting conditions exist, the chipbreaker supports consistent part quality and simplifies downstream cleaning and inspection. System-level compatibility and practical application guidance The insert functions as part of a system: an ISO-format insert seated in a compatible external holder or boring bar, with the correct shim/clamping set and replacement screws. Compatibility depends on form, relief angle, tolerance class, clamping design, size and thickness; verify these dimensions when selecting a holder. Typical applications include external and internal turning where stable set-up and moderate interruptions occur. The material designation and chipbreaker choice make this insert a pragmatic option for shops seeking repeatable performance on stainless components. Contact Metav Werkzeuge to review holder compatibility, order the TPMT130308-PSS T6215 insert or request tailored cutting-parameter recommendations from our technical advisers at Metav Werkzeuge. Technical data Article number: 6903137 Manufacturer SKU: TUN6903137 SKU: 6903137-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Core measurements Insert designation: TPMT130308-PSS ISO code: 130308 Corner radius: 0.8 mm Thickness: 3.18 mm Size (inscribed circle): 13 mm Included angle: 60° Relief angle: 11° Manufacturer article number: 6903137 Design & features Material: carbide Coating: CVD-coated Grade/sort: T6215 Chipbreaker: PSS Shape: triangular Hole: cylindrical hole with one-sided countersink (40°–60°) Application: turning; suitable for stainless steel under stable to lightly interrupted conditions System components: ISO insert, compatible external holder or boring bar, shim/clamping set, replacement screws Compatibility criteria: form, relief angle, tolerance class, clamping, size, thickness FAQ What steels is this insert intended for? The TPMT130308-PSS T6215 insert is intended primarily for machining stainless steels, with the T6215 grade offering wear resistance under stable to lightly interrupted turning. How does the PSS chipbreaker improve machining? The PSS chipbreaker on this insert promotes controlled chip formation during turning of stainless steels, aiding chip evacuation and contributing to a more consistent surface finish with fewer interruptions. Which holder types are compatible with this insert? Compatibility requires matching the ISO 130308 form, relief angle, tolerance class, clamping style, size and thickness; the insert is designed for use in standard external holders or boring bars that accept triangular ISO inserts. Can the insert be used for interrupted cuts? The T6215 grade and PSS chipbreaker are suitable for stable to lightly interrupted cutting conditions; for heavy interruptions a different geometry or grade may be preferable. What ensures repeatable seating and reduced vibration? The combination of the cylindrical hole with one-sided countersink (40°–60°), correct thickness and ISO form improves clamping stability and repeatable seating, which reduces vibration and improves part quality when used in a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide grade and precise geometry to maintain steady cycle times and low tool-change frequency; order directly via Metav Werkzeuge or consult the specialists for holder compatibility and application advice. TPMT 130308 T6215 triangle insert for turning — Tungaloy, CVD-coated carbide, 0.8 mm radius TPMT130308-PM T6215 is an ISO triangle turning insert intended for general external and internal turning where stable to slightly interrupted cuts are expected CVD-coated carbide grade T6215 ISO triangle insert 130308, 60° included angle 0.8 mm corner radius for profile stability 11° clearance angle, with cylindrical hole and countersink Consistent wear resistance for rostfreier Stahl turning The combination of a CVD-coated layer with a wear-resistant carbide substrate (grade T6215) is designed to extend tool life during continuous production. This coating, applied in a controlled process, forms a hard surface that reduces flank wear and improves resistance to adhesion and abrasive mechanisms encountered when machining rostfreier Stahl. As a result, machining intervals can be lengthened and unpredictable edge failures reduced, which supports higher uptime in turning operations. Geometry engineered for reliable dimensional control The ISO 130308 triangular form, with a 60° included angle and a 0.8 mm corner radius, provides stable cutting edges that preserve part geometry across repeated passes. The insert’s 11° clearance (relief) angle helps to avoid rubbing on the workpiece while maintaining sufficient support in the pocket. The 3.18 mm plate thickness contributes to rigidity, especially when used with a suitable external holder or boring bar; compatibility is determined by form, clearance angle, tolerance class, fastening and the insert’s size and thickness. Chip control and mounting details that reduce setup time Equipped with the PM chipbreaker, the insert aids controlled chip formation for a range of feed rates and depths of cut, reducing the need for secondary chip-management devices. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to match standard clamping systems and screw types. Because the system comprises an ISO insert, a matched external holder or bar, a support shim/clamping set and replacement screws, preparation and repeatability of setups are simplified for shop-floor teams. Application guidance and process advantages This grade and geometry are recommended where stable to slightly interrupted turning of rostfreier Stahl is required; selection of the correct chipbreaker and grade should be aligned with the workpiece alloy, machining strategy and machine stability. Using this insert in a correctly matched holder will typically reduce cycle time variability and improve surface consistency. The insert is particularly suitable for production environments seeking a balance between productivity and predictable tool life. Material and maintenance considerations Made from a premium carbide substrate with CVD coating, the insert is supplied as a spareable cutting edge rather than a resharpenable tip; replacement is straightforward and keeps machine downtime to a minimum. For optimal performance, ensure that holders are within the specified tolerance class and that clamping hardware is torque-controlled; this preserves the insert seat and prevents micro-movements that could degrade edge life. For reliable turning of rostfreier Stahl with Tungaloy quality, contact Metav Werkzeuge for the TPMT130308-PM T6215 insert and advice on suitable holders and process parameters via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6877200-Tungaloy Manufacturer article number: 6877200 Manufacturer SKU: TUN6877200 Model series: ISO-Drehwendeschneidplatten Label: TPMT130308-PM T6215 Facts ISO designation: 130308 Insert shape: triangular, 60° included angle Corner radius: 0.8 mm Plate size: 13 mm Plate thickness: 3.18 mm Clearance angle (relief): 11° Hole: with hole — cylindrical + one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Chipbreaker: PM Application: turning; suitable for rostfreier Stahl under stable to slightly interrupted conditions System build: ISO insert, compatible external holder or boring bar, support shim/clamping set, replacement screws FAQ What materials is this insert suited for? The TPMT130308-PM T6215 is formulated for turning rostfreier Stahl, offering improved wear resistance under stable to slightly interrupted cutting conditions. How does the T6215 coating benefit production runs? The CVD-coated T6215 grade on the TPMT130308-PM insert reduces flank wear and supports stable chip formation, which prolongs edge life and lowers the frequency of tool changes. Which holder features ensure correct compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the TPMT geometry requires a matching triangular pocket and screw/clamp arrangement for secure seating. Can the insert handle interrupted cuts? Yes; the grade and PM chipbreaker are intended for stable to slightly interrupted turning, though heavy interruptions may require a more robust cutting strategy. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius supports consistent profile control and improved edge strength, reducing the tendency for micro-chipping on peripheries and aiding surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9215 Wendeplatten - Tungaloy
Take advantage of the ISO-standard triangular insert with a CVD-coated cemented carbide grade T9215 for reliable medium-steel turning; the combination of controlled chip formation and robust edge strength supports high productivity and consistent component quality. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. TPMT 130308 T9215 – indexable turning insert, CVD-coated, 60° (Tungaloy) The TPMT 130308 T9215 is an ISO-format triangular indexable insert for external and internal turning, designed for efficient machining of medium-grade steel. CVD-coated cemented carbide grade T9215 PSS chipbreaker for controlled chip formation 60° triangular geometry for versatile turning 0.8 mm corner radius for durable edge strength Consistent productivity with CVD-coated carbide The CVD-coated cemented carbide composition of this insert combines surface wear resistance with core toughness, making it particularly suitable for continuous to lightly interrupted cuts in medium steel. The T9215 grade balances abrasive wear resistance and fracture toughness, which helps maintain cutting edge life under stable production conditions. Explaining the coating briefly: chemical vapour deposition creates a hard, uniform layer that reduces flank wear and extends tool life while preserving the insert’s mechanical integrity. For machining operations seeking fewer insert changes and predictable tool cycles, this combination promotes steady throughput and lower tool-related downtime. Geometry and mounting that support repeatable accuracy The triangular 60° shape and the 0.8 mm corner radius provide a versatile geometry that suits a wide range of turning tasks, from finishing to light roughing when tool overhang and setup stiffness are adequate. The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures positive, repeatable clamping in compatible holders; matching the holder by form, relief angle, tolerance class, fastening style, size and thickness is essential for secure seating and dimensional consistency. The 3.18 mm plate thickness contributes to rigidity under load, reducing chatter risk and improving surface finish on medium-steel components. Chip control and application-focused selection Equipped with a PSS chipbreaker, the insert directs chip flow and reduces the risk of long, entangling swarf in turning operations. For external and internal turning, choose the chipbreaker and grade combination according to workpiece material, machining stability and feed/speed strategy: the PSS geometry suits medium steels where controlled, segmented chips are desirable. Typical system setup includes the ISO-format insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Where processes encounter frequent interruptions or very unstable set-ups, consider grades and chipbreakers optimised for interrupted cuts. Practical guidance for workshop integration For shops integrating this insert into existing tooling systems, confirm holder compatibility with the ISO designation and the insert’s dimensions: size 13 mm, thickness 3.18 mm and the specified hole and countersink arrangement. When optimising cutting data, the T9215 grade enables productive cutting speeds with good edge stability, reducing the frequency of edge-related scrap. If there is any uncertainty about selecting the correct holder, clamping torque or cutting parameters for a specific component, the technical team at Metav Werkzeuge can provide targeted advice and cutting data recommendations to support process reliability. For machining medium-grade steel with a focus on productivity and consistent tool life, contact Metav Werkzeuge for detailed application advice or to request the Tungaloy TPMT130308-PSS T9215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6774029 Manufacturer SKU: TUN6774029 Seller SKU: 6774029-Tungaloy ISO designation: TPMT130308-PSS Data Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Special features Grade: T9215 Material/coating: CVD-coated cemented carbide Chipbreaker: PSS Hole style: cylindrical hole with single-sided countersink (40°–60°) Shape: triangular Application: external and internal turning Typical system: ISO insert, matching holder or boring bar, shim/clamp set and screws FAQ What materials is this insert best suited for? The Tungaloy TPMT130308-PSS T9215 insert is optimised for medium-grade steel, combining wear resistance and toughness suitable for continuous to lightly interrupted turning operations. How does the PSS chipbreaker affect machining? The PSS chipbreaker promotes controlled chip formation, reducing long swarf and improving process security during turning with the T9215 grade. Which holders are compatible with this ISO insert? Compatibility depends on matching the insert’s triangular form, relief angle (11°), tolerance class, fastening method, size (13 mm) and thickness (3.18 mm); use holders designed for TPMT 130308 geometry. What cutting conditions suit the T9215 grade? T9215 is intended for productive cutting of medium steels at moderate to high speeds under stable set-ups; it balances abrasive wear resistance with fracture toughness for reliable edge life. Can this insert be used for internal turning? Yes, the geometry and the cylindrical hole with countersink make the insert suitable for internal turning when used with an appropriate boring bar and correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high productivity and reliable wear resistance: the CVD-coated T9215 grade and the 0.8 mm corner radius deliver stable cutting performance in medium steel applications, while the ISO conformity simplifies tool selection. Order the insert directly via Metav Werkzeuge or consult the Metav advisors for application-specific recommendations. TPMT 130308 T9215 — ISO turning insert for medium steel, Tungaloy The TPMT130308-PS T9215 is an ISO-standard triangular indexable insert designed for general turning tasks, optimised for medium steel machining and continuous to slightly interrupted cuts CVD-coated cemented carbide T9215 Optimised for medium steel machining Triangular 13 mm insert with 0.8 mm radius Cylindrical hole with 40°–60° countersink High productivity with a wear-resistant grade The T9215 grade is a CVD-coated cemented carbide developed for dependable performance in medium steel. Its composition combines high wear resistance with good fracture toughness, which supports higher cutting speeds and longer tool life under continuous cutting conditions. As a result, cycle times can be reduced without sacrificing surface quality, making the insert particularly suitable for production environments where repeatable throughput and tool-change frequency matter. Geometry that promotes accuracy and repeatability The triangular form with a 13 mm size and a 0.8 mm corner radius delivers a balance between strength and finishing capability. The 11° clearance (relief) angle and 60° included angle provide predictable contact geometry with the workpiece, reducing deflection and ensuring consistent dimensional control. ISO conformity of the insert geometry simplifies selection of compatible holders and makes integration into existing tool systems straightforward, supporting efficient setup and fewer machining adjustments. Effective chip control and secure clamping for reliable operation The PS chipbreaker is matched to the material class and machining mode, aiding controlled chip formation and evacuation during deeper or continuous cuts. The insert features a cylindrical centre hole with a one-sided countersink (40°–60°) that enables secure, reproducible clamping in standard ISO holders and boring bars. Together, chip control and secure fixation reduce the risk of vibration and unexpected edge failure, contributing to stable surface finish and lower scrap rates. Choose the Tungaloy T9215 grade for robust, productive turning and contact Metav Werkzeuge for an application check or ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6774016 Manufacturer SKU: TUN6774016 SKU: 6774016-Tungaloy Model series: ISO turning indexable inserts Material: Cemented carbide Measurements Corner radius: 0.8 mm Insert size: 13 mm Plate thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Special features ISO designation: TPMT130308-PS Grade / coating: T9215, CVD-coated Shape: Triangular Centre hole: with hole Hole style: Cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: PS Typical application: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws Suited for: medium steel; continuous to slightly interrupted cuts FAQ Which materials is this insert intended for? The TPMT130308-PS T9215 insert is intended primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for productive turning of steel. How is holder compatibility determined? Compatibility with holders follows ISO conventions and is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; the triangular TPMT geometry fits standard ISO triangular tool holders. What benefits does the PS chipbreaker provide? The PS chipbreaker promotes manageable chip formation and evacuation under continuous cutting, improving surface finish and reducing the likelihood of chip-related interruptions during production. Is the insert suitable for interrupted cuts? The T9215 grade is optimised for continuous to slightly interrupted cuts; moderate interruptions are possible, but heavy interruption may require alternative geometries or grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD coating, universal T9225 grade and precise geometry for reliable medium to heavy steel turning. Order the insert directly via Metav Werkzeuge or contact the sales team for tailored advice. TPMT 130308 T9225 – ISO turning insert, triangular, 60° (Tungaloy) TPMT130308-23 T9225 is a triangular ISO turning insert for external and internal turning, designed for medium to heavy steel machining where intermittency or variable engagement requires additional toughness CVD-coated carbide grade T9225 Robust grade for medium to heavy steel machining Triangular ISO insert, 60° cutting angle 0.8 mm corner radius, cylindrical hole + countersink Reliable cutting performance under variable conditions The CVD-coated carbide composition and the T9225 grade provide a balance of toughness and wear resistance that is particularly suited to medium to heavy steel turning. The coating reduces flank and crater wear while the substrate maintains edge stability when the cut is slightly interrupted. This combination leads to consistent machining results, fewer insert changes and improved overall process efficiency in mixed-duty production. Secure clamping and wide holder compatibility Compatibility with the clamping system is determined by form, clearance angle, tolerance class, fastening, size and thickness, which ensures secure fixing in standard ISO holders. The cylindrical hole with single-side countersink (40°–60°) enables positive centring and stable axial support. As a result, toolholders achieve repeatable seating and reduced vibration, which supports better surface finishes and longer tool life. Geometry engineered for versatility and economy The triangular 60° cutting angle and 0.8 mm corner radius combine to offer a versatile edge for both finishing and light roughing tasks. The 3.18 mm thickness and 13 mm inscribed circle ensure mechanical strength and a stable cutting edge. For many turning operations this geometry reduces set-up complexity and allows a single insert to cover several machining steps, delivering practical cost-efficiency in production. Contact Metav Werkzeuge for availability and application guidance on the Tungaloy TPMT130308-23 T9225 turning inserts; the Metav team can advise on holder matching and supply options Technical data Article number: 6781100 Manufacturer SKU: TUN6781100 Designation: TPMT130308-23 T9225 Series: ISO turning indexable inserts Material: carbide Facts Inscribed circle: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance (relief) angle: 11° Cutting angle: 60° Features Coating: CVD-coated Grade: T9225 (robust universal grade) Plate form: triangular Hole: cylindrical hole + single-side countersink (40°–60°) Typical application: external and internal turning System: ISO insert with matching outer holder, shim/locking set and replacement screws FAQ What materials is this insert suitable for? The Tungaloy TPMT130308-23 T9225 insert is intended primarily for steel machining and performs well in medium to heavy cutting conditions where toughness is required How does the CVD coating benefit machining? The CVD-coated carbide of the T9225 grade increases wear resistance and helps maintain a stable cutting edge, which extends insert life under varying engagement conditions Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; ensure the holder matches the ISO triangular insert dimensions and the cylindrical hole with countersink What is the purpose of the centre hole and countersink? The cylindrical hole with single-side countersink secures the insert, provides positive location and enhances axial stability in the clamping system Can this insert be used for intermittent cuts? Yes, the robust T9225 grade and the carbide substrate are designed to tolerate slightly interrupted cuts typical in variable-engagement turning Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 for robust, repeatable performance in medium to heavy steel turning; the triangular 60° geometry and 0.8 mm nose radius balance strength and surface finish. Order the insert directly via Metav Werkzeuge or consult the team for tailored advice. TPMT 130308 T9225 — Turning indexable insert (triangle, 60°) | Tungaloy A TPMT 130308 T9225 indexable insert for ISO-standard turning, engineered for medium to heavy steel machining with a robust CVD-coated carbide substrate. CVD-coated carbide T9225 Suitable for medium to heavy steel turning 60° triangular geometry 0.8 mm nose radius for versatility High-performance grade for challenging steel turning The CVD-coated T9225 grade delivers a combination of toughness and wear resistance tailored to medium and heavy machining of steel. The carbide substrate with CVD layer enhances edge stability under variable engagement and mildly interrupted cuts, reducing the risk of premature chipping. As a result, productivity improves through longer tool life and more consistent component quality, while tool-change frequency is lowered — a direct efficiency gain in production environments where uptime matters. Geometry and compatibility that support flexible setups The triangular 60° plate form offers multiple indexed cutting edges, making efficient use of the insert geometry for batch and single-piece flow. With a 0.8 mm nose radius and a 3.18 mm plate thickness, this insert provides a balance between strength and achievable surface finish. Compatibility with ISO holders is governed by plate form, clearance angle (11°), tolerance class, fastening method, size (13 mm) and thickness, so correct pairing with an external toolholder or boring bar is essential for reliable clamping and optimum cutting conditions. Practical system design and application guidance The delivery concept for the system includes the ISO indexable insert, a matching external holder or boring bar, and the necessary shim/clamp set and replacement screws. Select the chipbreaker 24 and the T9225 grade according to the workpiece material and the machining method: the chipformer must suit the desired chip control and surface requirement. For complex specifications, Metav Werkzeuge provides application support to help select the right combination of insert geometry, chipbreaker and holder to achieve repeatable cycles and cost-effective throughput. Contact Metav Werkzeuge for tailored recommendations on using the T9225 grade and to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781200 SKU: 6781200-Tungaloy Manufacturer item no.: 6781200 Model series: ISO turning indexable inserts Label: TPMT130308-24 T9225 Manufacturer: Tungaloy Facts Nose radius: 0.8 mm Included angle: 60° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 13 mm Chipbreaker: 24 Special features Triangular plate form (three usable edges) Cylindrical hole with one-sided countersink (40°–60°) CVD-coated carbide substrate (T9225) Designed for medium to heavy steel turning System components: ISO insert, external holder/boring bar, shim/clamp set, replacement screws Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The TPMT 130308 T9225 insert is designed primarily for medium to heavy steel machining, with the CVD-coated T9225 grade optimised for robustness under varying engagement. How does the 0.8 mm nose radius affect performance? A 0.8 mm nose radius offers a compromise between edge strength and surface finish, making the insert suitable for both heavier cuts and acceptable optical finishes without excessive cutting forces. Is this insert compatible with standard ISO toolholders? Yes; the plate is ISO-standard. Compatibility depends on plate form, clearance angle (11°), tolerance class, fastening and thickness — confirm holder specifications match these parameters. What benefits does the T9225 coating provide? The CVD coating on the T9225 grade enhances wear resistance and edge stability, improving tool life and process reliability during medium to heavy steel turning. What is included in the system when ordering? Ordering typically covers the indexable insert; toolholders, shim/clamp sets and replacement screws are part of the overall system but are usually ordered separately to match machine and application requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a PS chipbreaker to maintain consistent productivity in medium-to-heavy turning operations; contact Metav Werkzeuge for technical advice or to confirm suitability for specific machining tasks. TPMT130308-PS T9225 — ISO turning insert, triangular 13 mm, 0.8 mm radius (Tungaloy) TPMT130308-PS T9225 is an ISO-standard triangular turning insert engineered for robust medium-to-heavy steel turning where variable engagement and short interruptions demand increased toughness. ISO-standard triangular insert 13 mm CVD-coated carbide grade T9225 PS chipbreaker for controlled chip formation 0.8 mm corner radius, 11° relief angle Consistent cutting performance with a robust carbide grade The insert is supplied in a CVD-coated carbide formulation identified by the grade T9225, a robust universal grade designed for medium-to-heavy steel machining. The CVD coating increases wear resistance at elevated temperatures while the substrate provides the necessary toughness when cuts are slightly interrupted or engagement varies. As a result, operators can expect stable tool life and fewer unexpected tool changes, which supports predictable production cycles and efficient use of machine time. Geometry and seating designed for repeatable accuracy The triangular 13 mm form and 0.8 mm corner radius are matched to an insert thickness of 3.18 mm and an 11° relief angle, ensuring reliable seating in compatible holders. The insert features a central hole with a cylindrical bore and one-sided countersink (40°–60°) to enable secure clamping and repeatable positioning. Compatibility with a given holder depends on the insert form, relief angle, tolerance class, fastening method, size and thickness, so selection of the correct external holder or boring bar is essential for achieving repeatable accuracy and surface quality. Effective chip control for safer, faster cycles Equipped with the PS chipbreaker, this insert manages chip formation and evacuation in a wide range of cutting conditions. The chipbreaker geometry reduces long, stringy chips and promotes short, controllable fragments, lowering the risk of part damage and reducing manual chip handling. Combined with the grade’s wear resistance, improved chip control contributes directly to higher machining throughput and a more reliable surface finish on turned components. Practical system integration and selection guidance The typical system includes the ISO insert, an appropriate external holder or boring bar, a shim/clamp set and spare screws. Choose the chipbreaker and grade according to the workpiece material, cutting mode and machine stability: the T9225 grade is the recommended starting point for steel components with variable engagement. For interrupted cuts or heavier feed conditions, the universal toughness of this grade reduces edge chipping and improves process stability, leading to fewer cycle interruptions and better overall productivity. For tailored application advice or to confirm whether the Tungaloy TPMT130308-PS T9225 is the right choice for a specific turning job, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and ordering guidance Technical data Article number: 6781060 Manufacturer SKU: TUN6781060 Label / SKU: 6781060-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Facts Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: CVD-coated carbide T9225 Chipbreaker: PS Shape: triangular Application: turning (external and internal) System components: insert, external holder or boring bar, shim/clamp set, spare screws Intended use: robust universal grade for medium-to-heavy steel machining FAQ Which holders are compatible with this triangular insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for ISO triangular inserts with a 13 mm seat and 3.18 mm thickness are suitable for the TPMT130308-PS T9225. Can this insert be used for interrupted cuts? Yes, the T9225 grade and the insert geometry are specified for applications where slightly interrupted cuts occur, offering increased toughness and resistance to edge chipping. What does the PS chipbreaker do? The PS chipbreaker promotes short, controlled chips and improved evacuation, enhancing safety and surface finish during turning with the TPMT130308-PS T9225. Is this insert suitable for internal turning? The insert is applicable for both external and internal turning when mounted in a compatible boring bar or holder designed for ISO triangular inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide grade T9225, precise 60° triangular geometry and a 0.8 mm corner radius for consistent performance in medium to heavy steel turning; order directly via Metav Werkzeuge or request application advice from our consultants. TPMT130308-PSS T9225 – ISO turning insert for external and internal turning by Tungaloy The TPMT130308-PSS T9225 is an ISO‑standard triangular indexable insert designed for turning operations where robustness and reliable chip control are required CVD-coated carbide for robust wear resistance Triangular 60° form with 0.8 mm corner radius 11° clearance angle for stable engagement Consistent performance with a universal, robust grade The main advantage of the supplied grade is its CVD-coated carbide construction, identified as T9225, which combines wear resistance with sufficient toughness. This makes the insert particularly suited to medium to heavy steel machining where cutting conditions can vary or include slight interruptions. The coated substrate reduces flank wear and helps maintain dimensional stability over longer tool life, translating into fewer tool changes and more predictable machining cycles. Geometry engineered for process stability and surface quality The triangular plate with a 60° included angle and a 0.8 mm corner radius provides a balance between strength and finish. The 11° clearance angle minimises rubbing and supports consistent chip flow when paired with the PSS chipbreaker, which is matched to the grade for effective chip control. Together, these features contribute to stable cutting forces, reduced vibration and improved surface integrity on shafts and bores during external and internal turning. Practical compatibility and assembly guidance This ISO plate is supplied in the TPMT130308 format and is designed for use with matching external holders or boring bars; compatibility depends on form, clearance angle, tolerance class, clamping and thickness. The insert includes a cylindrical hole with a single‑side countersink (40°–60°) to suit standard clamping sets and replacement screws. Selecting the appropriate chipbreaker and grade for the workpiece material and the chosen machining strategy ensures productive and repeatable performance. For bespoke application advice or stock information on the Tungaloy TPMT130308-PSS T9225 insert (SKU 6781322-Tungaloy), contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and availability Technical Data Article number: 6781322-Tungaloy Manufacturer SKU: TUN6781322 Manufacturer article number: 6781322 Model series: ISO-Drehwendeschneidplatten Designation: TPMT130308-PSS T9225 Facts Plate size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Triangular form indexable insert CVD-coated carbide grade T9225 PSS chipbreaker ISO-standard turning insert Suitable for external and internal turning Robust universal grade for medium to heavy steel machining FAQ What materials is this insert intended for? The Tungaloy TPMT130308-PSS T9225 insert is a universal, robust grade intended primarily for medium to heavy steel machining where variable engagement or slightly interrupted cuts occur. How does the PSS chipbreaker affect machining? The PSS chipbreaker on this ISO insert promotes controlled chip formation and evacuation; combined with the T9225 grade, it improves process stability and reduces the risk of built-up edge during turning. What holder characteristics are required for compatibility? Compatibility is determined by the form, clearance angle, tolerance class, clamping method, size and thickness of the insert; matching the TPMT130308 format with a suitable external holder or boring bar and clamping kit is recommended. Is this insert suitable for internal boring operations? Yes, the triangular TPMT130308-PSS insert is suitable for both external turning and internal boring when installed in an appropriate boring bar and clamped according to ISO specifications. What are the key geometry values to consider for tool selection? Key values include the 60° included angle, 11° clearance angle and the 0.8 mm corner radius; these influence strength, surface finish and cutting engagement in turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 130308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD‑coated carbide grade and a proven PM chipbreaker for stable medium-to-heavy turning operations; order through Metav Werkzeuge or consult their team for specification matching and availability. TPMT 130308 T9225 triangular turning insert (ISO) for Turning — Tungaloy The TPMT130308-PM T9225 is an ISO‑standard triangular indexable insert designed for external and internal turning in medium to heavy steel machining, featuring a PM chipbreaker and a compact 0.8 mm corner radius for versatile cutting conditions. ISO triangular insert TPMT form Robust CVD‑coated carbide grade T9225 PM chipbreaker for interrupted cuts 0.8 mm corner radius, 60° geometry Built for consistent performance in steel turning The insert is manufactured from cemented carbide with a CVD coating, which together provide a balanced combination of abrasion resistance and thermal stability. This configuration supports reliable cutting performance in medium to heavy steel machining, where variable engagement or slightly interrupted cuts occur. The 60° triangular geometry and 0.8 mm corner radius deliver a compromise between edge strength and surface finish, reducing the need for frequent index changes and thereby improving machine uptime. Compatibility with standard ISO holders ensures a straightforward swap into existing tooling systems when form, relief angle, tolerance class, fastening and thickness match. Coating and grade that tolerate mixed cutting conditions The T9225 grade is a robust universal composition engineered for demanding steel applications; combined with the PM chipbreaker, it helps control chip formation under fluctuating feeds and depths of cut. The CVD‑coated carbide layer increases resistance to thermal wear and edge degradation, which extends tool life in longer cycles and higher temperatures. For customers seeking predictable tool life and repeatable results, this pairing reduces unexpected downtime and contributes to a lower cost per component by maintaining cutting edge integrity across a range of operating parameters. Integration into tooling systems and practical advantages Designed as part of the ISO turning insert family, this triangular insert fits into typical external holder or boring bar arrangements; secure clamping is supported by the cylindrical hole with a single‑sided countersink (40°–60°). The 3.18 mm plate thickness and 13 mm inscribed size provide sufficient support in the pocket to resist deflection in heavier cuts. Using a universal grade and a versatile chipbreaker simplifies stockkeeping and offers process stability when machining steels with variable workhardening or interrupted surfaces. For efficient process planning, select the chipbreaker and grade to match material, cut type and machine rigidity. For specification advice or to confirm compatibility with current holders, contact Metav Werkzeuge for expedited availability and technical guidance on the Tungaloy TPMT130308-PM T9225 insert Technical Data Article number: 6781135 SKU: 6781135-Tungaloy Manufacturer SKU: TUN6781135 Model series: ISO turning indexable inserts Designation: TPMT130308-PM T9225 Material: Cemented carbide Coating: CVD coating Numeric Data Corner radius: 0.8 mm Insert angle: 60° Free cutting angle: 11° Thickness: 3.18 mm Inscribed circle / size: 13 mm ISO code: 130308 Special features Chipbreaker: PM Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Grade: T9225 Typical application: Turning (external and internal) Shape: triangular Compatibility: determined by form, relief angle, tolerance class, fastening, size and thickness Schneidstofftyp: CVD‑coated carbide FAQ What material is the insert made from? The insert is produced from cemented carbide with a CVD coating to enhance wear resistance and thermal stability for steel turning. Which operations suit this insert best? This triangular ISO insert is intended for external and internal turning in medium to heavy steel machining, offering good performance in slightly interrupted cuts. What benefits does the PM chipbreaker provide? The PM chipbreaker promotes controlled chip formation under fluctuating engagement, improving chip evacuation and protecting the cutting edge during interrupted or variable cuts. How is holder compatibility ensured? Compatibility depends on the insert form, relief (free) angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and repeatable performance with the insert. Is this grade suitable for variable cutting conditions? Yes, the T9225 grade is a robust universal choice that tolerates changing conditions and offers improved toughness for stable machining across varied steel workpieces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 1603ZE T313W Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, T313W carbide grade and a secure clamping hole design for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT TPMT1603ZE T313W — ISO turning insert, triangular 60° geometry by Tungaloy TPMT TPMT1603ZERD4 T313W is an ISO‑normed indexable insert designed for external and internal turning applications, offering a balanced combination of wear resistance and edge stability. ISO triangular insert, 60° geometry Tungaloy T313W carbide grade 11° clearance angle, 3.18 mm thickness Cylindrical hole with 40°–60° countersink Single-sided chipbreaker for general turning Consistent machining from a carbide grade tuned for durability The T313W grade is a Tungaloy carbide composition engineered to balance wear resistance and toughness. This results in stable cutting-edge performance under a variety of turning conditions, which supports predictable tool life and reduced downtime. By combining a robust carbide substrate with the specified geometry, the insert delivers repeatable metal removal rates and supports steady surface finish quality. For production environments requiring reliable indexable tooling, this grade helps maintain process stability while keeping setup changes to a minimum. Seamless integration with ISO tool systems reduces setup complexity Compatibility with existing toolholders is determined by form, clearance angle, tolerance class, fastening type, size and thickness. The 11° clearance angle and ISO designation ensure that the insert seats correctly in standard external holders and boring bars, simplifying inventory management. Understanding these parameters helps planners match the insert to a suitable holder and clamping set, so assemblies remain rigid and secure during cutting. Clear reference to the ISO series reduces trial-and-error on the shop floor and aids quicker tool changes. Geometry and hole design improve clamping reliability and chip control The triangular shape with a 60° included angle provides three indexable edges per insert, enhancing economy. A plate thickness of 3.18 mm contributes to bending stiffness for interrupted or heavy cuts, while the cylindrical hole with a single‑side countersink (40°–60°) gives a reproducible clamping position and firm fixation. The single-sided chipbreaker is matched to general turning tasks and assists in forming predictable chips, supporting coolant penetration and evacuation during machining. These features collectively reduce vibrations and the risk of edge failure. Application guidance and selection advice for dependable results This ISO series insert is intended for a wide range of turning operations; the correct chipbreaker and grade selection should reflect workpiece material, machining type and machine‑tool stability. For fine finishing or unstable setups, select a geometry and cutting data that reduce cutting forces; for higher productivity prefer feeds and depths that exploit the grade’s wear resistance. If there is uncertainty about the match between workpiece and insert, technical consultation is recommended — detailed machining parameters and tests yield the best balance between productivity and tool life. Contact options are available for tailored support. For production reliability choose the Tungaloy TPMT1603ZERD4 T313W insert and contact Metav Werkzeuge for specific application advice or to request batch availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809190 Manufacturer SKU: TUN6809190 Brand: Tungaloy Facts Thickness: 3.18 mm Inscribed circle: 16 mm Included angle: 60° Clearance angle: 11° Special features Carbide material: Hartmetall Grade/coating: T313W Shape: triangular Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Series: ISO turning inserts Application: external and internal turning FAQ What applications is this insert suitable for? The TPMT1603ZERD4 T313W indexable insert (Tungaloy, SKU TUN6809190) is designed for general external and internal turning; the grade supports a balance of wear resistance and toughness for varied turning tasks. Which geometric data define compatibility with holders? Key dimensions are the 60° triangular form, 16 mm inscribed circle, 3.18 mm thickness and 11° clearance angle; these determine fit in ISO‑standard holders and correct clamping position. How does the hole and countersink affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures a reproducible seating and secure fixation, lowering the risk of movement under cutting forces for the TPMT1603ZERD4 insert. Can this insert be indexed for economical use? Yes — the triangular shape offers multiple cutting edges per insert, enabling economical indexing and reducing tooling costs per edge while maintaining consistent geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tailored for stainless steels, a compact 0.4 mm corner radius for versatile turning, and ISO conformity for simple tool changeover. Order the TPMT16T304-PM AH6225 inserts through Metav Werkzeuge or consult our advisors for application-specific setup and cutting data. TPMT16T304 AH6225 ISO triangular indexable insert for turning — Tungaloy TPMT16T304-PM AH6225 is a triangular ISO indexable insert designed for external and internal turning, offering a sharp yet stable cutting edge for medium-duty machining of stainless steels. ISO triangular insert TPMT16T304 format PVD-coated carbide AH6225 for stainless steels 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Consistent cutting performance on stainless steels The PVD-coated carbide grade AH6225 combines a fine, wear-resistant coating with a substrate engineered for balanced toughness. This results in a sharp but stable cutting edge that copes with common issues in machining stainless steels, such as work-hardening and built-up edge. The coating improves abrasion resistance and reduces friction, which supports longer tool life and steadier cutting forces. For production environments that require repeatable part quality, the insert’s specification helps to reduce process variation and rework. ISO conformity and secure clamping for fast tool changes Supplied as an ISO-standard triangular insert, the TPMT16T304-PM format ensures compatibility with a broad range of external holders and boring bars. Critical geometries — form, relief angle, tolerance class, fixation and thickness — determine holder compatibility; the 11° relief angle and the specific hole style allow reliable clamping and repeatable positioning. The central cylindrical hole with a single-sided countersink (40°–60°) accommodates common clamp systems, simplifying insert replacement and maintenance intervals while preserving concentricity and stability. Surface quality and process stability from geometry and chip control A 0.4 mm corner radius gives a pragmatic balance between edge strength and surface finish: small enough to maintain dimensional accuracy and fine surface quality, yet generous enough to resist chipping under interrupted cuts. The PM chipbreaker geometry is matched to the grade and application to promote consistent chip control, reducing risk of chip entanglement and improving operator safety. For medium turning operations, this combination supports higher productivity with fewer tool changes and predictable results. Practical specifications and system considerations The insert is triangular with a nominal size 16 and a plate thickness of 3.97 mm, designed to work within a standard ISO turning system comprising insert, suitable external holder or boring bar, and the appropriate clamping set and screws. When replacing turning inserts, verify holder seat dimensions, clearance angles and fixation torque to ensure correct seating and to avoid premature wear. Selection of cutting data should consider material condition, rigidity of the setup and whether finishing or semi-finishing is intended; modest feeds with appropriate speeds help exploit the grade’s balance between sharpness and edge stability. For robust and repeatable stainless steel turning choose the Tungaloy TPMT16T304-PM AH6225 insert — contact Metav Werkzeuge for tailored cutting data and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6831833 SKU: 6831833-Tungaloy Manufacturer SKU: TUN6831833 Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole style: Cylindrical hole + unilateral countersink (40°–60°) Design and features Triangular plate form PVD-coated carbide (AH6225) Chipbreaker: PM ISO designation: TPMT16T304-PM Application: Turning (external and internal) Compatibility: ISO indexable insert systems FAQ What materials is this insert best suited for? The TPMT16T304-PM AH6225 is optimised for machining stainless steels; the PVD-coated carbide grade balances edge sharpness and wear resistance for reliable performance. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a compromise between surface finish and edge strength, enabling good dimensional control on medium-turning applications while reducing the likelihood of chipping. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixation method and size; the TPMT16T304-PM follows ISO norms and fits standard TPMT-format external holders and boring bars when dimensions match. What does the PM chipbreaker mean in practice? The PM chipbreaker is selected for chip control in mixed conditions; combined with the AH6225 grade, it promotes short, controllable chips and steadier cutting for general turning tasks. Is the insert suitable for interrupted cuts? Yes — the combination of the substrate and coating gives a stable cutting edge suited to intermittent engagement, provided the setup rigidity and cutting data are adjusted accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH6225 Wendeplatten - Tungaloy
Take advantage of PVD-coated AH6225 carbide for consistent medium turning performance and reliable chip control; combine the 60° triangular geometry and PS chipbreaker for steady productivity in stainless steels. Order through Metav Werkzeuge or consult our specialists for application guidance and availability. TPMT 16T304 AH6225 triangular ISO turning insert — Tungaloy A TPMT 16T304 AH6225 ISO triangular turning insert engineered for external and internal turning in a wide range of stainless steels. ISO triangle insert, 60° geometry PVD-coated carbide AH6225 grade PS chipbreaker for controlled chips 0.4 mm corner radius for edge stability Cylindrical hole with 40°–60° countersink Reliable edge life with a sharp, stable cutting geometry The AH6225 grade is a PVD-coated carbide formulation designed to balance a keen cutting edge with wear resistance during medium turning operations. This combination reduces the frequency of edge changes and supports consistent dimensional accuracy over extended runs. The result is fewer interruptions for tool changeover and more predictable component quality. For those less familiar with coatings, PVD (physical vapour deposition) provides a thin, hard layer that improves abrasion resistance without compromising edge sharpness, making it suitable for varying stainless steel workpiece conditions. Consistent chip control and surface finish from the PS chipbreaker The integrated PS chipbreaker is tailored to produce short, manageable chips when machining stainless steels under typical turning parameters. Controlled chip formation reduces the risk of entanglement and protects the machined surface from damage, thereby lowering rework rates. The triangular 60° geometry and 0.4 mm corner radius contribute to predictable cutting forces, helping to maintain surface integrity and reduce vibration. When surface finish and process stability matter, matching chipbreaker and grade brings a clear efficiency gain in hourly output. Straightforward integration into ISO tool systems for fast setup The insert features a triangular plate form with a cylindrical hole and single-sided countersink (40°–60°) that accommodates common ISO-compatible holders. Compatibility to a holder depends on form, clearance angle (11°), tolerance class, clamping design, size and thickness; here the plate thickness is 3.97 mm and the nominal plate size is 16 mm. This design supports quick clamping and repeatable positioning, which shortens setup time and helps keep machine uptime high. If uncertainty exists about holder match or cutting data, a short consultation can clarify the correct clamping and cutting strategy. Contact Metav Werkzeuge for precise application advice and availability of the Tungaloy TPMT16T304-PS AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and delivery options Technical data Article number: 6831298 Manufacturer SKU: TUN6831298 SKU: 6831298-Tungaloy Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate thickness: 3.97 mm Plate size: 16 mm Special features Grade: AH6225 Coating: PVD-coated Material: carbide Chipbreaker: PS Plate form: triangular Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Typical application: turning (external and internal) FAQ Is this insert suitable for machining stainless steels? The AH6225 grade on the TPMT16T304-PS insert is developed for stainless steels, offering a balance of edge sharpness and wear resistance for medium turning operations. What does the PS chipbreaker deliver in practice? The PS chipbreaker on this insert promotes short, controlled chips and improved surface quality when paired with the appropriate cutting data for stainless steels, reducing the risk of chip-related interruptions. Which toolholders are compatible with this insert? Compatibility depends on the holder's pocket form, clamping method, clearance angle and size; the TPMT16T304-PS fits ISO triangular 16 arrangements with a 3.97 mm plate thickness and the described hole/countersink configuration. How does the PVD coating affect performance? The PVD-coated carbide combination enhances abrasion resistance while preserving a sharp edge, which supports longer intervals between indexings and more consistent workpiece tolerances. Can the insert be used for finishing passes? With an appropriate cutting geometry and reduced depth or feed, the insert can achieve respectable finishes; the 0.4 mm corner radius and PS chipbreaker help maintain surface integrity during lighter cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com