TPMT 16T304 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade engineered for stainless steel turning together with ISO compatibility and secure clamping — a combination that ensures consistent edge life and smooth production flow. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TPMT 16T304 AH6225 — Turning insert, PVD‑coated carbide, 60° (Tungaloy) The TPMT 16T304 AH6225 is an ISO‑standard triangular turning insert designed for external and internal turning of stainless steels, offering a balance of sharp cutting action and edge stability for medium machining and variable conditions. PVD-coated carbide grade AH6225 Optimised for stainless steel turning 60° triangular geometry for versatility 0.4 mm corner radius for consistent edge life High‑performance grade for reliable stainless steel machining The PVD‑coated AH6225 grade combines a fine‑tuned coating process with a tough carbide substrate to provide a sharp yet stable cutting edge in demanding conditions. Designed as a universal solution for stainless steels, the grade delivers predictable wear behaviour during medium cutting operations and when conditions change, reducing the need for frequent tool changes. The balanced edge form supports consistent dimensional accuracy and contributes to extended tool life, which in turn helps maintain throughput on production lines. ISO compatibility and secure clamping for simple integration The insert follows ISO geometry and is compatible with standard indexable holders when matched by form, relief angle, tolerance class, fastening method, size and thickness. The triangular 60° shape and the cylindrical hole with one‑sided countersink (40°–60°) enable reliable seating and repeatable location in a wide range of external and internal turning holders. With a free angle of 11°, a plate thickness of 3.97 mm and a nominal size of 16 mm, the component integrates cleanly into existing setups, reducing setup time and simplifying inventory management for common ISO tool systems. Consistent chip control, edge stability and economical uptime Equipped with the PSS chipbreaker and a 0.4 mm corner radius, the insert delivers manageable chip formation and a robust cutting edge that withstands intermittent forces. These characteristics help produce a fine surface finish while limiting edge chipping under medium cutting conditions. The combination of chip control and grade stability improves process reliability and lowers overall machining costs by extending indexable life and reducing scrap rates, making the solution suitable for batch production or continuous turning operations. For procurement of the Tungaloy TPMT 16T304 AH6225 insert or for tailored application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will confirm suitability and delivery options promptly Technical data Article number: 6829896 Manufacturer SKU: TUN6829896 SKU: 6829896-Tungaloy Model series: ISO turning inserts Label: TPMT16T304-PSS AH6225 Facts Included angle: 60° Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 3.97 mm Plate size: 16 mm Special features PVD-coated carbide (AH6225) Chipbreaker: PSS Shape: triangular Hole: cylindrical hole plus one-sided countersink (40°–60°) Typical application: turning Compatible with ISO holders Material: carbide (Hartmetall) FAQ What materials is this insert designed for? The TPMT16T304‑PSS AH6225 from Tungaloy is optimised for machining stainless steels, offering a grade and coating combination tailored for reliable performance in those alloys. Which toolholders are compatible with this insert? Compatibility depends on matching the ISO triangular form, relief angle, tolerance class, fastening and plate thickness; the insert fits standard ISO holders sized for a 16 mm triangular insert and the required clamping geometry. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a strong cutting edge that balances edge life and surface finish, helping to resist chipping while producing consistent component quality with moderate cutting parameters. What chip control can be expected? The PSS chipbreaker combined with the AH6225 grade delivers controlled chips for typical turning operations, aiding evacuation and improving surface condition under medium machining conditions. What are the identifying product codes for ordering? Order using the article number 6829896 or the manufacturer SKU TUN6829896; the product is listed as TPMT16T304‑PSS AH6225 (SKU 6829896‑Tungaloy). Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 16T304 AH6235 Wendeplatten - Tungaloy
TPMT16T304-PSS AH6235 Wendeschneidplatte zum Drehen von Tungaloy Die TPMT16T304-PSS AH6235 ist eine ISO-genormte, dreieckige Wendeschneidplatte für Außen- und Innendrehen, entwickelt für rostfreien Stahl und unterbrochene Schnitte. PVD-beschichtetes Hartmetall für lange Standzeit Optimierter Spanbrecher PSS für unterbrochene Schnitte Dreieckige Form mit 0,4 mm Eckenradius für präzise Konturierung Mit Loch und einseitiger Senkung für sichere Befestigung Hohe Standzeit und Bruchfestigkeit bei rostfreiem Stahl Die Kombination aus PVD-Beschichtung und zäher Hartmetallsorte AH6235 sorgt für verbesserte Verschleißfestigkeit und reduzierte Ausbruchneigung bei rostfreiem Stahl. Durch die speziell abgestimmte Sortencharakteristik lassen sich Unterbrechungen im Schnitt besser tolerieren, wodurch sich die Werkzeugstandzeit erhöht. Die Wendeschneidplatte eignet sich besonders für Anwendungen, bei denen Prozesssicherheit und konstante Oberflächengüte gefragt sind. ISO-kompatible Form und sichere Montage reduzieren Rüstzeiten Dank der ISO-Genormung ist die Platte kompatibel mit gängigen Außenhaltern und Bohrstangen; die Passgenauigkeit wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Das zylindrische Loch mit einseitiger Senkung 40°–60° ermöglicht eine zuverlässige Klemmung und verringert Wiederholabweichungen beim Wechseln. Ein klar definierter Freiwinkel 11° unterstützt stabile Schnitte bei variierenden Schnittbedingungen. Einsatzempfehlung und Auswahlhinweise für Anwender Für Außen- und Innendrehen empfiehlt sich die Auswahl eines passenden Spanbrechers und einer Haltergeometrie, die auf Stabilität und Spanabfuhr ausgelegt ist. Der Spanbrecher PSS ist auf abreißende Späne ausgelegt und verbessert die Spanformerführung bei instabilen Schnittverhältnissen. Systembedingt besteht die Montage aus ISO-Drehplatte, passendem Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben; so lässt sich die Produktionsbereitstellung schnell und sicher realisieren. Für produktive Zerspanung mit hoher Prozesssicherheit empfehlen wir die TPMT16T304-PSS AH6235 von Tungaloy; Bestellanfragen per E-Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6890197 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TPMT16T304-PSS Fakten Eckenradius: 0,4 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 3,97 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Beschichtung: PVD (physikalische Gasphasenabscheidung) Sorte: AH6235 (zähere Sorte, geeignet für rostfreie Stähle und unterbrochene Schnitte) Spanbrecher: PSS (optimierter Spanformer für abreißende Späne) Loch: mit Loch (zylindrisches Loch + einseitige Senkung 40°–60°) Plattenform: dreieckig Anwendung: Drehen (Außen- und Innendrehen) Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben SKU: 6890197-Tungaloy FAQ Für welche Werkstoffe ist die Platte besonders geeignet? Die TPMT16T304-PSS AH6235 von Tungaloy ist speziell für rostfreien Stahl ausgelegt; die zähe Sorte AH6235 reduziert Ausbrüche und erhöht die Standzeit bei unterbrochenen Schnitten. Welchen Vorteil bietet die PVD-Beschichtung? Die PVD-Beschichtung der Tungaloy-Wendeschneidplatte verbessert die Verschleißfestigkeit und Hitzeresistenz, wodurch längere Werkzeugstandzeiten und konstantere Oberflächengüten erreicht werden. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,4 mm ermöglicht präzise Konturierung und feine Formgenauigkeit; bei Tiefschnitt- oder Schruppaufgaben sollte die Schneidkantenbelastung berücksichtigt werden. Welche Rolle spielt der Spanbrecher PSS? Der Spanbrecher PSS steuert die Spanbildung und eignet sich besonders bei instabilen oder unterbrochenen Schnitten, da er die Späne bricht und die Spanabfuhr verbessert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 16T304 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a tough PVD-coated carbide grade AH6235, a precise 0.4 mm nose radius and the standard 60° geometry for consistent turning performance; order the insert directly via Metav Werkzeuge or contact our consultants for selection advice. TPMT16T304-PM AH6235 – TPMT ISO 16T304 turning insert by Tungaloy, PVD-coated carbide for turning The TPMT16T304-PM AH6235 is an ISO-standard triangular turning insert designed for external and internal turning operations, particularly suited to interrupted cuts and machining of stainless steel. PVD-coated carbide grade AH6235 Triangular ISO indexable insert, 60° geometry 0.4 mm nose radius for fine finishing Suitable for stainless steel and interrupted cuts Durable carbide grade for stable chip control and longer tool life The combination of a PVD-coated surface and the tougher AH6235 grade delivers improved resistance to chipping and abrasion when machining demanding materials. This makes the insert particularly effective in avoiding premature edge failure during interrupted cuts and in workpieces that tend to work-harden. The result is higher process reliability and fewer tool changes, which supports uninterrupted production runs and reduces overall cycle costs. Geometry tuned for rigidity and surface quality The 60° triangular geometry with an 11° clearance and a 0.4 mm nose radius balances cutting strength with surface finish. The modest nose radius permits precise finishing without excessive cutting forces, while the acute geometry provides rigidity for external and internal turning. For operators less familiar with the specifics, a nose radius defines the contact area: a smaller radius reduces cutting load peaks and helps achieve a consistent surface without excessive vibration. Standardised fit and secure clamping for quick integration Designed as part of an ISO indexable system, the insert integrates with holders and boring bars that match form, clearance angle, tolerance class, fastening and thickness. The plate is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) for positive locating and secure clamping; its thickness of 3.97 mm and 16 mm inscribed size follow ISO norms to simplify replacement. This compatibility reduces setup time and simplifies inventory management across multiple machines. Productivity advantages through focused chipbreaking and application fit The PM chipbreaker and the selected grade optimise chip formation for stainless steels and similar materials, reducing the risk of built-up edge and facilitating chip evacuation. By pairing the insert with an appropriate holder and cutting parameters, workshops can expect consistent surface quality and extended edge life, contributing to lower per-part tooling costs and more predictable maintenance intervals. The insert’s design supports fast insertion changes and repeatable results across batches. For tailored recommendations on holder compatibility and cutting data, contact Metav Werkzeuge for application support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6890214 SKU: 6890214-Tungaloy Facts Inscribed circle: 16 mm Nose radius: 0.4 mm Thickness: 3.97 mm Clearance angle: 11° Geometry angle: 60° Manufacturer SKU: TUN6890214 Special features Material: carbide Coating: PVD Grade: AH6235 Chipbreaker: PM Plate form: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning, external and internal, interrupted cuts Model series: ISO turning indexable inserts With hole: yes FAQ What materials is this insert suited for? The TPMT16T304-PM AH6235 insert is optimised for machining stainless steel and applications with interrupted cuts; the AH6235 grade provides toughness that helps prevent chipping. How does the PM chipbreaker affect performance? The PM chipbreaker promotes controlled chip formation and evacuation when machining ductile materials, improving surface quality and reducing the risk of built-up edge on the insert. Is this insert compatible with existing ISO holders? Yes, the insert conforms to ISO dimensions and clamping features; compatibility depends on holder form, clearance angle, tolerance class, fastening type, size and thickness. What is the recommended approach for minimising edge wear? Use the PVD-coated AH6235 grade with conservative cutting data for initial trials, ensure stable clamping and evaluate coolant and feed; this approach reduces mechanical and thermal loading at the cutting edge. Can the insert be used for finishing passes? With a 0.4 mm nose radius, the insert can achieve good finishing results provided cutting parameters and machine rigidity are suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH6235 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH6235 carbide grade combined with a triangular 60° geometry and a 0.4 mm corner radius for stable, damage-resistant turning of stainless steels; order the TPMT16T304-PS AH6235 turning inserts directly via Metav Werkzeuge or ask the consultants if needed. TPMT 16T304 AH6235 Turning Insert (PVD carbide, 0.4 mm radius) – Tungaloy A TPMT16T304-PS AH6235 ISO turning insert designed for reliable external and internal turning, optimised for stainless-steel work and interrupted cutting conditions PVD-coated carbide grade AH6235 for stainless steel Triangular insert, 60° cutting angle, 0.4 mm radius 11° clearance angle and 3.97 mm plate thickness Central hole with cylindrical bore and countersink High process stability for stainless-steel turning The AH6235 grade is a PVD-coated carbide chosen for its toughness and resistance to edge breakage when machining stainless steels and interrupted surfaces. This combination reduces the risk of flank chipping under unstable cutting conditions; improved edge integrity results in fewer tool changes and a steadier production flow. The PS chipbreaker helps control chip formation during moderate to heavy cuts, supporting consistent surface quality and repeatable machining results. Geometry that supports precision and rigidity A triangular plate with a 60° included angle and a 0.4 mm corner radius provides a balance between strength and finish. The acute geometry concentrates cutting forces through a robust corner, while the minor radius still enables acceptable corner strength for finishing passes. The 11° relief angle and a plate thickness of 3.97 mm increase bending stiffness when mounted in a suitable ISO holder, improving dimensional accuracy and reducing tool deflection on long overhangs or heavy cuts. ISO compatibility and secure clamping for predictable performance Produced to ISO dimensions, the insert interfaces with holders according to form, clearance angle, tolerance class, fastening method, size and thickness. The central hole — a cylindrical bore with a single-sided countersink (40°–60°) — ensures reliable seating and repeatable clamping. Selection of a matched carrier and correct torque on the clamping screw prevent slippage and maintain repeatability across indexings, which is essential for automated or batch production where tool-change consistency affects throughput. Practical guidance for selection and operation For applications involving frequent interruptions or built-up edge tendencies typical of stainless steels, the AH6235 grade combined with the PS chipbreaker provides a compromise between tool life and edge security. The triangular shape allows three usable cutting edges per index, improving economy in batch operations. When integrating the insert into a toolholder, check compatibility with ISO holder geometries and observe manufacturer-recommended cutting data to maximise tool life and surface finish. For machining stainless-steel components with improved edge security, request the Tungaloy TPMT16T304-PS AH6235 inserts from Metav Werkzeuge; technical advice and order support are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 6890207 Manufacturer SKU: TUN6890207 SKU: 6890207-Tungaloy Facts Radius: 0.4 mm Cutting angle: 60° Relief angle: 11° Thickness: 3.97 mm Size: 16 Special features Grade: AH6235 Coating: PVD Material: Carbide Chipbreaker: PS Plate shape: triangular Hole: with hole; cylindrical bore + single-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert suited for? The AH6235 grade with PVD coating is intended primarily for stainless steel machining and is especially resilient in interrupted cut conditions. How is the insert secured in the toolholder? The plate uses a central cylindrical hole with a single-sided countersink; secure seating and correct clamping torque ensure repeatable positioning when used with compatible ISO holders. What is the benefit of the 0.4 mm corner radius? A 0.4 mm radius offers a compromise between corner strength and surface finish, reducing susceptibility to chipping while enabling reasonably fine profiles. How many cutting edges are available per index on this geometry? The triangular shape provides three primary cutting edges per insert index, improving economy for cyclic or batch operations. Which chipbreaker is fitted and what effect does it have? The PS chipbreaker is designed to promote controlled chip formation under a range of cutting conditions, aiding evacuation and improving surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH725 Wendeplatten - Tungaloy
Benefit from a universal, PVD-coated carbide AH725 grade and ISO compatibility for consistent machining of Stahl and rostfreier Stahl; the combination of fracture-resistant geometry and an optimised PSF chipbreaker supports secure, repeatable turning operations. Order the insert via Metav Werkzeuge or consult the technical advisers for application-specific guidance. TPMT 16T304 AH725 TPMT16T304-PSF turning insert – PVD-coated carbide, 60° The TPMT16T304-PSF AH725 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a fracture-resistant grade for mixed-material production on Stahl and rostfreier Stahl. ISO triangular insert TPMT 16T304 AH725 PVD-coated carbide grade AH725 Optimised PSF chipbreaker for secure cutting 0.4 mm corner radius with 11° relief angle Consistent edge life and broad material coverage for production stability The combination of a PVD-coated carbide substrate and the AH725 grade delivers a balance of wear resistance and toughness, making the insert suitable across a wide range of components made from Stahl and rostfreier Stahl. The coating improves flank wear resistance while the fracture-resistant composition reduces the risk of unexpected edge chipping during interrupted cuts. For operations that demand dependable performance with smaller tools and mixed batches, this geometry supports longer effective tool life and reduces regrinding frequency, contributing to stable process windows and lower overall tooling cost per part. Faster set-up and repeatable seating reduce downtime Designed to the ISO specification, the geometry and tolerance of the triangular insert ensure precise fitment in compatible holders; compatibility is determined by form, 11° relief angle, tolerance class, clamping method, size and thickness. The insert’s hole configuration — a cylindrical bore with a single-sided countersink (40°–60°) — provides secure seating and repeatable axial location for reliable torque transfer and consistent chip evacuation. In practice, this means quicker index changes, predictable tool offsets and fewer re‑adjustments between jobs, which supports efficient production cycles and predictable quality. Better chip control and surface finish through optimised geometry The PSF chipbreaker and a 0.4 mm corner radius are selected to promote stable chip formation and reduced built-up edge when turning both external and internal contours. The 60° triangular shape provides versatile cutting angles for a range of operations while the 3.97 mm thickness and robust clamping geometry maintain rigidity under radial loads. For finishing passes, the chipbreaker aids in producing consistent surface quality; for roughing, the same geometry supports controlled material removal with reduced risk of workpiece damage. When combined with an appropriate holder and correct cutting parameters, the insert improves cycle times and reduces scrap rates. Practical system considerations and application guidance The insert is intended to be used as part of a system that includes a matching external holder or boring bar, underlay/clamp set and replacement screws. Select the chipbreaker and grade with regard to the workpiece material, machining strategy and available machine stability. For unstable setups or interrupted cuts, the AH725 grade offers the fracture resistance required; for high-speed, uninterrupted turning on stable machines, the grade still offers dependable wear resistance thanks to the PVD coating. Technical advisers can provide parameter ranges and holder recommendations for specific machines and materials. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Tungaloy inserts and secure the TPMT16T304-PSF AH725 for production-critical turning tasks Technical data Manufacturer article number: 6864949 SKU: 6864949-Tungaloy Manufacturer SKU: TUN6864949 Designation: TPMT16T304-PSF AH725 Facts Insert size (inscribed circle): 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Special features Shape: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) Grade/coating: AH725, PVD-coated carbide Chipbreaker: PSF Application: turning (external and internal) Suitable materials: Stahl, rostfreier Stahl System: ISO insert compatible with ISO holders, boring bars, underlay/clamp set and replacement screws FAQ What materials is this insert best suited for? The TPMT16T304-PSF AH725 insert is formulated for use on Stahl and rostfreier Stahl, with the AH725 grade offering a universal, fracture-resistant performance across varied batches. Which chipbreaker is fitted and what is its benefit? The insert features a PSF chipbreaker, which is optimised for secure chip formation and improved surface finish in both finishing and medium-duty cutting operations. How does the insert locate in the holder? Location is ensured via the cylindrical hole with a single-sided countersink (40°–60°), providing repeatable axial seating and secure clamping when used with the correct ISO-compatible holder and clamp set. What cutting geometry should be expected for fine finishing? With a 0.4 mm corner radius and 60° triangular geometry, the insert can achieve good surface quality on finish passes while retaining sufficient robustness for light roughing when appropriate feeds and speeds are applied. Is the grade suitable for interrupted cuts or unstable setups? Yes; the AH725 grade is designed to be fracture-resistant and is a suitable choice for operations with intermittent cuts or where higher process security is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH725 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH725 grade and the PS chipbreaker to secure consistent chip formation and high process reliability; the ISO‑normed triangular geometry and precise corner radius 0.4 mm ensure repeatable clamping and surface quality in turning operations. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TPMT 16T304 AH725 TPMT16T304-PS – Triangular turning insert, PVD-coated, Tungaloy TPMT16T304-PS AH725 is a triangular, ISO‑standard insert designed for robust external and internal turning, offering a universal, fracture‑resistant grade for steel and stainless steels in industrial turning applications PVD-coated universal grade AH725 PS chipbreaker for consistent chips ISO‑normed triangular insert 16 mm Cylindrical hole with 40°–60° countersink Increased process reliability with a universal PVD grade The PVD‑coated AH725 grade combines wear resistance and toughness to deliver stable chip formation and extended tool life in mixed‑material environments. The coating reduces flank and crater wear, while the substrate material provides toughness under interrupted cuts. For workshops managing varied components, the universal cutting grade minimises tool variations and supports higher machine uptimes by reducing tool changes and inventory complexity. Consistent clamping and repeatable results As an ISO‑normed triangular insert, the geometry and hole arrangement guarantee reliable seating in compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) and a standard included angle of 60°, enabling secure clamping and repeatable positioning. These mechanical features support tighter tolerances and predictable results across production batches. Optimised chip control and fine cutting detail With the PS chipbreaker and a corner radius of 0.4 mm, the insert balances chip control and edge strength for finishing and medium cuts. The modest radius helps achieve consistent surface finishes while maintaining corner stability during radial engagement. The insert thickness of 3.97 mm and an inscribed circle size of 16 mm suit compact toolholders and smaller‑scale setups, making the grade especially practical where space and tool rigidity influence the cycle time and quality. Contact Metav Werkzeuge for tailored advice on using Tungaloy inserts in specific turning processes or request compatibility checks for your holders via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6856683 Manufacturer SKU: TUN6856683 SKU: 6856683-Tungaloy Type designation: TPMT16T304-PS AH725 Facts Corner radius: 0.4 mm Thickness: 3.97 mm Inscribed circle / size: 16 mm Clearance angle: 11° Included angle: 60° Special features Material: cemented carbide (PVD-coated) Coating / grade: AH725 Chipbreaker: PS Plate shape: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility notes: holder match by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The TPMT16T304-PS AH725 insert is formulated as a universal, fracture‑resistant grade intended primarily for steel and stainless steels, offering broad material coverage in turning. How does the PS chipbreaker affect machining? The PS chipbreaker on the TPMT16T304-PS promotes controlled chip formation and evacuation, improving process security and reducing the risk of built‑up edge during turning. Which holders are compatible with this ISO insert? Compatibility requires a matching triangular pocket with the correct tolerance class, clearance angle and fastening arrangement; the insert’s dimensions (16 mm inscribed circle, 3.97 mm thickness) and hole style must align with the holder specifications. Is this insert suitable for finishing cuts? Yes, the combination of a 0.4 mm corner radius and the AH725 grade provides a balance of edge strength and finish capability, making it suitable for medium to fine finishing operations. What does the AH725 grade offer compared with other grades? AH725 provides higher fracture resistance and stable chip control across varying steels, reducing the need for frequent grade changes and supporting consistent production across mixed batches. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 AH725 Wendeplatten - Tungaloy
Take advantage of a universally applicable, chipbreak‑resistant grade combined with PVD‑coated carbide and a compact 0.4 mm corner radius to maintain process security and reliable surface quality in both external and internal turning. Order directly via Metav Werkzeuge or consult the technical team for cutting data and holder compatibility. TPMT 16T304 AH725 — Turning indexable insert, PVD‑coated carbide, 0.4 mm radius (Tungaloy) TPMT 16T304 AH725 is a triangular ISO insert for general turning, designed to deliver stable cutting performance across steels and stainless steels in both external and internal operations. ISO triangular insert TPMT format PVD‑coated carbide grade AH725 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink High process security and broad material coverage The TPMT16T304-PSS AH725 is built on a PVD-coated carbide substrate and the AH725 grade, engineered as a chipbreaker-compatible solution for mixed‑material shops. Its composition provides process security during interrupted cuts and variable conditions, which reduces the risk of edge failure and unplanned stops. For turning applications, this combination supports consistent tool life and a reliable balance between wear resistance and toughness when machining steel and stainless steel, making it a sound choice where material mix and repeatability matter. Secure seating and standardised fit for rapid indexability As an ISO conforming triangular insert it is shaped for repeatable clamping and quick indexing. The geometry includes an 11° relief, a plate 3.97 mm thickness, and a cylindrical hole with a single‑side countersink (40°–60°), which together ensure accurate positioning and stable fixation in the holder. These features minimise vibration and help maintain a stable cutting edge during higher feeds, reducing set‑up time and improving overall uptime in production environments where consistent clamping and straightforward insert replacement are required. Optimise edge form for surface finish and productivity A 0.4 mm radius offers a versatile edge that supports both finishing and moderate profiling tasks with good surface quality while preserving cutting edge robustness. The PVD layer enhances wear resistance, extending usable tool life under varied cutting conditions and permitting higher productivity through longer cycles between indexings. Select the PSS chipbreaker and adjust speeds and feeds to match part rigidity and toolholder stability; for smaller tooling or demanding process stability, this insert's balance of edge strength and coating performance delivers measurable gains in machining reliability. Discuss application requirements with Metav Werkzeuge for tailored cutting data, holder recommendations and to secure the TPMT16T304-PSS AH725 for dependable turning results — contact info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6864992 SKU: 6864992-Tungaloy Manufacturer SKU: TUN6864992 Label: TPMT16T304-PSS AH725 Material: Cemented carbide Grade: AH725 Coating: PVD Core data Corner radius: 0.4 mm Plate thickness: 3.97 mm Size: 16 Included angle: 60° Relief angle: 11° Hole: with hole Countersink: 40°–60° Special features Chipbreaker: PSS Shape: Triangular Standard: ISO turning insert Typical application: External and internal turning Compatibility: Holder fit depends on form, clearance angle, tolerance class, fixation, size and thickness FAQ Which materials can be machined with this insert? The TPMT16T304-PSS AH725 is intended for machining steel and stainless steel, offering a universal, chipbreak‑resistant performance suitable for mixed‑material production. What are the key geometric features of the insert? The triangular insert features a 60° included angle, a 0.4 mm corner radius, 11° relief and a 3.97 mm plate thickness; it also has a cylindrical hole with a single‑side countersink. What chipbreaker is supplied and what is its benefit? Equipped with the PSS chipbreaker, the insert promotes controlled chip formation and improved process stability, particularly under variable cutting conditions. Is the grade coated and what advantage does this bring? Yes — the AH725 grade is PVD‑coated carbide, which enhances wear resistance and supports longer tool life while maintaining edge toughness. How is holder compatibility ensured for this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fixation method, size and thickness; verify these parameters against the holder specification and consult Metav Werkzeuge for tailored recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 16T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH725 carbide, stable chip control from the PM chipbreaker, and ISO compatibility for reliable turning operations — order the TPMT16T304‑PM AH725 inserts directly via Metav Werkzeuge or consult our advisors for application-specific guidance. TPMT16T304‑PM AH725 — ISO triangular turning insert for external and internal turning (Tungaloy) A TPMT16T304‑PM AH725 ISO‑standard triangular insert designed for turning applications, offering a PM chipbreaker and a PVD‑coated carbide grade optimised for variable materials and demanding process security. PVD‑coated AH725 carbide Universal for Stahl and rostfreier Stahl PM chipbreaker for stable chip control ISO‑standard triangular geometry Increase process reliability with a wear‑resistant cutting grade The AH725 grade is a PVD‑coated carbide developed for consistent performance across a broad range of Stahl and rostfreier Stahl machining tasks. That coating enhances edge life and wear resistance, which translates directly into fewer indexings and longer productive runs. For production environments where cycle stability and repeatability matter, this cutting grade reduces variability and supports predictable tool‑change intervals. Integrate easily into existing ISO tool systems Designed to the ISO designation TPMT16T304‑PM, the insert matches common triangular holders by form, size and fastening style. The triangular geometry with a 60° corner angle provides straightforward fixturing and multiple usable edges per insert, improving cost efficiency. The insert’s mounting arrangement — with a cylindrical hole and single‑side countersink (40°–60°) — ensures secure clamping and repeatable seating in standard indexable toolholders. Maintain chip control and surface quality under varied conditions The PM chipbreaker is tuned for controlled chip formation in interrupted and continuous cuts, reducing the risk of built‑up edge and surface irregularities. Its design helps evacuate chips reliably when machining both Stahl and rostfreier Stahl, supporting consistent finishes and minimised rework. For smaller tools or operations with tight stability demands, the chipbreaker contributes to steady forces and improved process security. Compact geometry and easy indexability for economical turning A corner radius of 0.4 mm provides a balance between edge strength and versatility — suitable for medium‑depth cuts while maintaining a fine surface. The plate thickness of 3.97 mm and the 16 mm inscribed circle size enable robust seating and repeated indexing without compromise. Together, these dimensions make the insert a pragmatic choice for shops focusing on productivity and predictable tool performance. For tailored recommendations on Tungaloy AH725 turning inserts and availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application‑oriented advice and supply options. Technical Data Article number: 6856730 Manufacturer SKU: TUN6856730 Label: TPMT16T304‑PM AH725 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall (carbide) Numeric Data Radius: 0.4 mm Plate thickness: 3.97 mm Plate size (inscribed circle): 16 mm Cutting angle: 60° Clearance angle: 11° Design & Features Shape: triangular Chipbreaker: PM Hole: with cylindrical hole + single‑side countersink (40°–60°) Grade/coating: AH725 PVD‑coated Application: Turning (Drehen) ISO designation: TPMT16T304‑PM FAQ What materials are recommended for this insert? The TPMT16T304‑PM AH725 is recommended for a wide range of Stahl and rostfreier Stahl applications, with the AH725 grade providing reliable wear resistance across mixed materials. How does the PM chipbreaker affect machining? The PM chipbreaker delivers controlled chip formation and evacuation, improving surface finish consistency and reducing the likelihood of chip entanglement in turning operations. What size and clamping interface does the insert use? This insert has an inscribed circle of 16 mm, a thickness of 3.97 mm and is supplied with a cylindrical hole plus a single‑side countersink (40°–60°) for secure ISO‑standard clamping. Is the insert indexable and how many edges are available per plate? The triangular geometry provides multiple indexable cutting edges per plate; the TPMT16T304‑PM AH725 is designed for straightforward indexing to extend usable life and lower cost per edge. Which SKU should be quoted when ordering? Quote article number 6856730 or manufacturer SKU TUN6856730 when enquiring about the TPMT16T304‑PM AH725. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 16T304 AT9530 Wendeplatten - Tungaloy
Benefit from a cost-effective, high-precision finishing solution that combines a coated cermet grade tailored for surface quality with an ISO‑standard geometry for reliable mounting and repeatable results; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TPMT16T304-PS AT9530 — ISO triangular turning insert, coated cermet, for finishing by Tungaloy A TPMT16T304-PS AT9530 insert engineered for precision turning and light finishing of steel components, offering a fine nose radius and a chipbreaker tuned to surface-quality applications Coated cermet grade AT9530 for fine surface finish Suited for finishing and light machining of steel 0.4 mm nose radius for precise profile control ISO triangular insert, 60° included angle Consistent surface quality through a specialised cermet grade The AT9530 grade is a coated cermet designed specifically for finishing and light machining of steel, prioritising a superior surface finish and uniform wear across the cutting edge. Cermet combines ceramic hardness with metallic toughness; the applied coating further stabilises cutting performance and reduces the tendency for built‑up edge during low‑depth finishing passes. This results in a predictable edge life and consistent component appearance, making the insert particularly suitable where dimensional accuracy and surface integrity matter. Secure seating and straightforward integration with ISO holders Compatibility with toolholders is governed by the ISO format, clearance angle, tolerance class, fastening method, size and thickness. The triangular geometry with a 60° included angle, a 3.97 mm plate thickness and an 11° clearance ensures reliable seating in standard external holders or boring bars. The insert is supplied with a cylindrical hole plus a one‑side countersink (40°–60°) to match common clamping systems. These controlled interfaces reduce vibration and enable repeatable clamping behaviour, which in turn helps to preserve surface quality and dimensional consistency during production runs. Practical selection and machining advantages on the shop floor The PS chipbreaker is tailored for finishing; paired with the 0.4 mm nose radius it delivers precise profile control and minimal scallop for fine turning tasks. For best results, match the chipbreaker and grade to the part material and machine stability: this insert is optimised for steel applications in light‑cut scenarios. The ISO standard designation simplifies inventory and replacement procedures. The combination of coated cermet chemistry and the controlled geometry provides quiet cutting, stable wear progression and predictable component outcomes—advantages that translate directly into higher first‑pass yields and lower rework rates. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy TPMT16T304-PS AT9530 insert and to arrange a purchase or technical consultation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773753 Manufacturer SKU: TUN6773753 SKU: 6773753-Tungaloy Brand: Tungaloy Facts Size: 16 mm Thickness: 3.97 mm Nose radius: 0.4 mm Included angle: 60° Clearance angle: 11° Countersink angle: 40°–60° Design and features ISO turning insert series Insert designation: TPMT16T304-PS Grade/coating: AT9530 Chipbreaker: PS Cutting material type: coated cermet Plate shape: triangular Mounting: with hole (cylindrical + single countersink) Typical application: finishing and light machining of steel Model series: ISO-Drehwendeschneidplatten FAQ What machining tasks is this insert best suited for? The TPMT16T304-PS AT9530 is intended for finishing and light machining of steel where high surface quality and even wear are priorities. How does the PS chipbreaker affect machining? The PS chipbreaker is tuned for finishing cuts; it promotes small, controlled chip formation and helps to maintain a stable cutting edge for consistent surface finish. Which holders are compatible with this ISO insert? Compatibility follows ISO standards: the triangular form, 11° clearance, plate thickness and the hole/countersink geometry ensure fitment in matching external holders or boring bars designed for TPMT‑style inserts. What are the key geometry values to check when replacing an insert? Important parameters include the insert size (16 mm), thickness (3.97 mm), nose radius (0.4 mm), clearance angle (11°) and the hole/countersink configuration, all of which determine correct seating and clamping behaviour. What does the AT9530 designation mean for performance? AT9530 denotes a coated cermet composition optimised for fine finishing on steel, offering uniform wear characteristics and a focus on achieving superior surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: conflicting material information (Hartmetall vs coated cermet). Unable to generate a reliable product description due to discrepancies in the provided data, which may result from errors in classification, documentation, or interpretation of the material properties, making it challenging to ensure accuracy and reliability in the final output, as the conflicting details require clarification or further verification to resolve the issue and provide a consistent and trustworthy description that aligns with the intended specifications and expectations for the product in question, highlighting the importance of accurate data management and validation processes in such scenarios.
TPMT 16T304 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant coated cermet grade GT9530, a precise PS chipbreaker and the ISO triangular geometry for stable finishing and longer tool life in steel turning. Order the TPMT16T304-PS GT9530 directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. TPMT16T304 GT9530 Turning Insert — ISO triangular insert, coated cermet (Tungaloy) A TPMT16T304-PS GT9530 ISO triangular turning insert engineered for finishing and light universal turning of steel where improved surface quality and extended tool life are required ISO triangular insert, 16 mm size Coated cermet grade GT9530 PS chipbreaker for fine finishing 0.4 mm corner radius for smooth surfaces Superior finishing courtesy of a coated cermet grade The insert’s coated cermet substrate, designated GT9530, combines ceramic hardness with metal toughness to deliver improved wear resistance and consistent surface finish on steel. Cermet grades offer a fine-grain cutting edge that reduces built-up edge formation, making them especially suited to interrupted cuts or operations with stable machine and workpiece set-up. The result is fewer regrinds and predictable part quality over longer tool life. Consistent geometry and chip control for predictable results The ISO triangular form and the PS chipbreaker provide controlled chip formation and stable cutting forces, which support repeatable finishing passes. With an included angle of 60° and a relief or clearance angle of 11°, the geometry is compatible with standard ISO holders when the form, clearance, tolerance class, clamping and thickness match. Specifying the correct holder and ensuring rigid clamping are decisive for achieving the grade’s potential and avoiding vibration-induced wear. Easy set-up and clear mounting features for production use Mounting is straightforward: the insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for secure fastening in compatible holders. The thickness of 3.97 mm and the corner radius of 0.4 mm influence feed selection and surface finish — a smaller radius favours finer finishes at moderate feeds, while the plate thickness supports stable clamping under light to medium cutting forces. Include a suitable shim or clamping kit and spare screws in the system build for uninterrupted production. For tailored recommendations or to secure Tungaloy turning inserts for your next batch production, contact Metav Werkzeuge for technical assistance and ordering support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6998377 SKU: 6998377-Tungaloy Manufacturer SKU: TUN6998377 Manufacturer: Tungaloy Core technical figures Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with hole Countersink angle: 40°–60° Special features Grade/coating: GT9530 Substrate: coated cermet Chipbreaker: PS Shape: triangular Application: Turning Typical usage: external and internal turning; finishing to light universal operations System components: ISO insert, compatible external holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert suited for? The TPMT16T304-PS GT9530 is formulated as a wear-resistant cermet grade optimised for machining steel in finishing to light universal turning applications. How does the PS chipbreaker affect the cut? The PS chipbreaker on this ISO triangular insert promotes fine chip control and a smoother cutting action, which helps to achieve a better surface finish and consistent chip evacuation during finishing passes. Which holder characteristics must be checked before mounting? Ensure holder compatibility by matching the insert form, clearance or relief angle (11°), tolerance class, clamping method, size and thickness (3.97 mm). The insert’s cylindrical hole with a 40°–60° countersink must also match the holder’s screw/counterbore arrangement. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when mounted in an appropriate boring bar or internal holder that provides adequate rigidity. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius supports fine surface finishes at moderate feeds; it reduces the risk of edge chipping while maintaining a good balance between strength and finish quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 GT9530 Wendeplatten - Tungaloy
TPMT 16T304 GT9530 – ISO-Drehwendeschneidplatte zum Drehen (Tungaloy) Die TPMT16T304-PSS GT9530 ist eine ISO-genormte, dreieckige Wendeschneidplatte für Außen- und Innendrehen, entwickelt für Schlicht- bis leichte Universalbearbeitung mit Fokus auf Oberflächengüte und lange Standzeit. TPMT16T304-PSS GT9530 von Tungaloy Beschichtetes Cermet für hohe Oberflächengüte PSS-Spanbrecher für Schlicht- und Universalbearbeitung Dreieckige Platte, Ø 16 mm, Eckenradius 0,4 mm Zylindrisches Loch mit einseitiger Senkung 40°–60° Hohe Oberflächengüte durch beschichtetes Cermet Die Kombination aus beschichtetem Cermet und einem Hartmetall-Träger sorgt für verbesserte Verschleißfestigkeit und gleichbleibende Oberflächengüte bei Stahlbearbeitung. Die GT9530-Sorte ist gezielt für Schlicht- bis leichte Universaloperationen ausgelegt und bietet unter stabilen Schnittbedingungen eine verlängerte Standzeit, was Rüst- und Stillstandszeiten reduziert. Für Anwender bedeutet das spürbar weniger Teileausschuss und gleichmäßigere Finish-Qualität. Präzise Spanformung und Prozessstabilität Der integrierte PSS-Spanbrecher ist optimiert für feine Spanzerlegung und gleichmäßigen Spanfluss beim Schlichten. Ein Eckenradius von 0,4 mm und ein Frei winkel von 11° tragen zu reduziertem Schneidkantenverschleiß und stabiler Schwingungsdämpfung bei. Wer Wert auf reproduzierbare Oberflächen und konstante Messergebnisse legt, profitiert von der Kombination aus Spanbrecher und Geometrie, da sie die Wärmeentwicklung minimiert und damit die Werkzeuglebensdauer fördert. ISO-Kompatibilität und einfache Systemintegration Als ISO-genormte Wendeschneidplatte ist die Plattenpassung durch Form, Frei winkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Die dreieckige Form mit Plattendicke 3,97 mm und Plattengröße 16 mm sowie das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglichen einfache Montage in gängigen Außenhaltern und Bohrstangen. Für Anwender ohne tiefes Fachwissen erklärt: Ein Spanbrecher ist eine Einprägung auf der Schneidkante, die den Span bricht und dadurch Schnittkraft und Oberflächenbild steuert. Für welche Fertigungsumgebungen geeignet Die Platte richtet sich an Zerspanungsbetriebe, die unter stabilen Spann- und Maschinenbedingungen hochwertige Schlichtergebnisse und konstante Standzeiten erwarten. Die Sorte ist ideal für Serien mit längeren Laufzeiten, bei denen Prozesssicherheit und Oberflächenqualität im Vordergrund stehen. Ein Shop, der produktive Durchlaufzeiten und geringe Nacharbeit wünscht, nutzt mit dieser Sorte einen effizienten Kompromiss aus Arbeitstempo und Finish. Empfehlung: Die GT9530-Sorte von Tungaloy für hochwertige Schlichtbearbeitung wählen; für Bestellung oder technische Beratung direkt Metav Werkzeuge kontaktieren: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998364 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TPMT16T304-PSS Daten Winkel: 60° Frei winkel: 11° Eckenradius: 0,4 mm Plattendicke: 3,97 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: GT9530 — verschleißfest, für Schlicht- bis leichte Universalbearbeitung Spanbrecher: PSS — Spanbrecher für Schlicht- und leichte Universalbearbeitung Plattenform: Dreieckig Loch: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) ISO-genormt FAQ Welche Werkstoffe lassen sich mit der TPMT16T304-PSS GT9530 bearbeiten? Die TPMT16T304-PSS GT9530 von Tungaloy ist speziell für Stahlbearbeitung ausgelegt und liefert gute Oberflächen bei Schlicht- und leichten Universalprozessen. Wofür steht die Bezeichnung PSS beim Spanbrecher? PSS bezeichnet den Spanbrecher für Schlicht- und leichte Universalbearbeitung; bei der TPMT16T304-PSS GT9530 sorgt er für feine Spanzerlegung und bessere Oberflächen. Welche Vorteile bietet die GT9530-Sorte gegenüber unbeschichteten Sorten? Die GT9530-Sorte kombiniert beschichtetes Cermet mit hoher Verschleißfestigkeit, was bei stabilen Schnittbedingungen längere Standzeiten und konstantere Oberflächen ermöglicht. Wie beeinflusst der Eckenradius von 0,4 mm die Bearbeitung? Ein Eckenradius von 0,4 mm reduziert die Schneidkantenspannung und verbessert die Oberflächenqualität beim Schlichten, wie bei der TPMT16T304-PSS GT9530 mit SKU TUN6998364 zu beobachten. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die ISO-Genormung der TPMT16T304-PSS GT9530 gewährleistet Kompatibilität, sofern Form, Frei winkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters übereinstimmen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 16T304 NS9530 PF Wendeplatten - Tungaloy
Conflicting product information detected: one data entry lists "Hartmetall" (cemented carbide), while another specifies an "uncoated cermet" cutting material. These two material designations are mutually inconsistent, as they refer to distinctly different types of cutting materials with unique properties, applications, and performance characteristics. Cemented carbide, commonly used for its hardness and wear resistance, differs significantly from uncoated cermet, which is valued for its toughness and ability to produce smooth finishes. To ensure the accuracy and reliability of the product description, it is essential to confirm the correct cutting-material specification. Please provide clarification to resolve this discrepancy and proceed with the finalisation of the product details.
TPMT 16T304 NS9530 PS Wendeplatten - Tungaloy
Benefit from a combination of precise finishing, low cutting forces and a robust carbide construction for consistent, high-quality surface results; order directly via Metav Werkzeuge or consult the specialists for application guidance. TPMT 16T304 NS9530 ISO turning insert — uncoated cermet for finishing, Tungaloy The TPMT16T304-PS NS9530 is an ISO turning insert engineered for precision external and internal turning, optimised for continuous finishing cuts on steel with low cutting forces and excellent surface quality. TPMT16T304-PS NS9530 uncoated cermet grade Sharp edge for high surface finish PS chipbreaker for continuous cuts 11° rake angle and 0.4 mm corner radius Achieve consistently superior surface finishes with a finishing-grade cermet The uncoated cermet grade NS9530 is designed for finishing operations on steel, offering a very sharp cutting edge and reduced built-up edge tendency. This combination yields improved surface integrity at low depths of cut and supports continuous cutting conditions. The insert’s geometry and material reduce cutting forces, which in turn lowers vibration and helps produce repeatable part quality. For processes where surface roughness and dimensional consistency are critical, the composite ceramic-metal cutting material provides the edge retention and thermal stability required for extended finishing runs. Clear compatibility criteria to match the correct holder and clamping Compatibility with a toolholder depends on several defined parameters: insert form and size, rake angle, tolerance class, clamping and fastening method, thickness and locating hole geometry. This triangular insert uses an ISO-style designation and a cylindrical hole with a single-sided countersink (40°–60°); the correct seat and screw must be selected to ensure secure fixation and optimal cutting geometry. Checking holder specifications against these characteristics prevents misalignment and ensures the intended cutting angle and clearance are maintained during turning operations. Productivity benefits from geometry and chip control The PS chipbreaker is tailored for small depths of cut and continuous feeds, promoting short, controllable chips that evacuate reliably in stable machining conditions. Combined with the 0.4 mm corner radius and 11° rake, the geometry supports low cutting forces and high surface finish without sacrificing edge robustness. The cermet composition delivers a fine balance between hardness and toughness, making the insert particularly effective for finishing passes where minimal vibration and consistent tool life are priorities—contributing to predictable cycle times and reduced rework. Practical application advice and handling notes for reliable performance Use this insert for precision external and internal turning where continuous cuts and fine finishing are required; its 16 mm inscribed size and 3.97 mm thickness suit compact to medium-duty holders. For best results, pair the insert with a holder that matches the ISO seat and provides rigid clamping; ensure cutting parameters are conservative during initial trials to confirm stability. As an uncoated grade, the insert performs best at moderate cutting speeds typical of finishing operations; monitoring wear and replacing inserts before edge chipping preserves part quality and process reliability. Contact Metav Werkzeuge for tailored application advice and to order genuine Tungaloy TPMT16T304-PS NS9530 inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998552-Tungaloy Manufacturer article number: 6998552 Manufacturer SKU: TUN6998552 Name: TPMT16T304-PS NS9530 Facts Inscribed size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Rake angle: 11° Included angle: 60° Special features Triangular insert form Uncoated cermet cutting material (NS9530) Carbide substrate PS chipbreaker for continuous cuts Cylindrical hole with single-sided countersink (40°–60°) Application: turning ISO turning indexable insert series FAQ What materials is this insert suitable for? The TPMT16T304-PS NS9530 is a finishing-grade cermet insert optimised for machining steel, delivering low cutting forces and high surface quality during continuous finishing cuts. Which turning operations are appropriate for this grade? Ideal uses include external and internal finishing passes where small depths of cut and consistent surface finish are required; the PS chipbreaker aids chip control in continuous feeds. How is compatibility with a toolholder determined? Compatibility is based on insert form and size, rake/clearance angles, tolerance class, clamping method, thickness and locating hole geometry; verify that the chosen holder matches these parameters. What does the PS chipbreaker do in practice? The PS chipbreaker produces short, controllable chips under continuous cutting conditions, improving evacuation and helping to maintain stable machining and surface quality. Is the insert coated and what are the implications? This is an uncoated cermet grade; the lack of coating gives a very sharp edge for finishing and reduced cutting forces, though thermal and adhesion behaviours differ from coated carbide grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp NS9530 cermet finishing grade and ISO compatibility for consistent, high-quality turning results; order the inserts directly via Metav Werkzeuge or consult our advisors for application support. TPMT 16T304 NS9530 turning insert by Tungaloy — uncoated cermet finishing grade, 60° triangle A TPMT16T304-23 NS9530 insert engineered for precision turning of steel, optimised for continuous cuts and small depths of cut with a low cutting-force geometry. Cermet finishing grade NS9530 for steel Sharp cutting edge for superior surface finish ISO 16T304 triangular insert, 60° included angle 0.4 mm corner radius with cylindrical hole and countersink High-quality finishing with reduced cutting forces The uncoated cermet grade NS9530 is formulated for finish turning of steel where low cutting forces and a razor-sharp edge are decisive. A sharp edge reduces burr formation and vibration, which leads to a high surface finish and minimised rework. In continuous cutting conditions and with small depths of cut the combination of grade and geometry delivers steady performance and consistent component quality, so cycle times remain predictable and scrap rates fall. Designed for seamless ISO-system integration The insert follows the ISO designation 16T304, which simplifies tool selection and ensures mechanical compatibility with standard triangular holders. The insert’s 60° included angle and 11° clearance angle are decisive for seating and approach direction; tolerance class, fixation and plate thickness determine final fit. The cylindrical hole with a one-sided countersink (40°–60°) secures repeatable clamping and alignment, reducing set-up time and promoting process stability across batches. Predictable edge behaviour and chip control The geometry is supplied with chipbreaker 23, chosen to match the finishing role of the grade; it supports stable chip evacuation during continuous turning. The sharp cutting edge inherent to this grade lowers thrust forces, which benefits both tool life and machine load. Where tool wear monitoring is applied, the insert provides consistent flank wear progression, enabling reliable reconditioning strategies and more accurate tool-change scheduling. Practical application advice for shop-floor success Intended primarily for external and internal turning of steel in finishing operations, the insert performs best with modest depths of cut and steady feed to exploit the cermet’s edge integrity. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters is recommended to avoid mounting errors. For one-off trials or serial production runs, selecting the appropriate chipbreaker and verifying clamping torque will reduce the risk of chatter and ensure optimal surface quality. Contact Metav Werkzeuge for tailored application advice and to secure Tungaloy finishing inserts for precision turning; technical consultants are available to match the insert to the correct holder and operation. Technical Data Article number: 6998636 Manufacturer SKU: TUN6998636 Brand SKU: 6998636-Tungaloy Series: ISO-Drehwendeschneidplatten Data Insert size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Grade: NS9530 (uncoated cermet) Chipbreaker: 23 Form: triangular Hole: with cylindrical hole and one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert designed for? The NS9530 uncoated cermet grade is designed primarily for machining steel; the TPMT16T304-23 NS9530 insert is optimised for finishing cuts on steel workpieces. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm corner radius balances a fine surface finish with adequate edge strength; it helps maintain a sharp cutting line while reducing the risk of premature chipping under finishing conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the ISO 16T304 designation assists in selecting the correct triangular holder for the TPMT16T304-23 insert. Is chip control handled by the insert geometry? Yes, the chipbreaker 23 is matched to the finishing application to promote stable chip evacuation during continuous turning and to support a clean surface finish. Can this insert be used for interrupted cuts? The grade and geometry are optimised for continuous turning and small depths of cut; for heavily interrupted cuts, consider a different grade or a more robust geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of high‑quality finishing performance, stable clamping geometry and reliable material suitability for steel turning operations. The cermet grade delivers low cutting forces and excellent surface results while the ISO format ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult the advisors for process optimisation. TPMT 16T304 NS9530 — TPMT16T304-PM ISO turning insert by Tungaloy A TPMT16T304-PM NS9530 ISO turning insert designed for precision finishing in steel turning, suitable for both external and internal operations Triangle insert, 60° cutting geometry Cermet grade NS9530 for fine finishes 0.4 mm corner radius for precision 11° clearance angle, low cutting forces Cylindrical hole with single‑side countersink Consistent finishing and material suitability The NS9530 grade is an uncoated cermet developed for finishing applications on steel, providing a sharp cutting edge and low cutting forces that reduce tool chatter and improve component surface quality. This makes the insert particularly effective in continuous cut scenarios and for small depths of cut where a superior surface finish is required. The choice of cermet substrate results in good wear resistance during finishing cycles and stable edge condition over repeated parts, supporting predictable machining outcomes and fewer mid‑batch interventions. Geometry engineered for reproducible accuracy A controlled geometry contributes directly to process reliability: the 60° geometry in triangular form gives a defined cutting angle, while the 0.4 mm nose radius balances form accuracy and surface roughness. The 11° relief angle lowers friction at the flank face and helps maintain the sharp edge characteristic of this grade. Manufactured to ISO dimensions, the insert’s tolerances and sizes permit straightforward interchangeability with ISO‑compliant holders, simplifying tool changeovers and reducing set‑up time in mixed‑machine environments. Secure clamping and robust insert body Mechanical stability is ensured by the cylindrical hole with a single‑side countersink (40°–60°), which supports reliable clamping and repeatable seating in the toolholder. The 3.97 mm thickness of the insert enhances rigidity at the cutting edge, reducing vibration during light finishing passes and improving dimensional consistency. The triangular ISO format also offers multiple effective cutting edges per index, increasing economy of use and supporting uninterrupted production runs when combined with appropriate clamping components and replacement screws. Recommended use cases and handling advice Designed primarily for turning of steel, the insert performs best in finishing operations where small material removal rates and continuous cuts are common. Select the PM chipbreaker and NS9530 grade to favour surface quality and reduced burr formation. Ensure the matching holder corresponds to the insert’s form, relief, tolerance class, fastening method, size and thickness to achieve intended performance. Regular inspection of seat condition and replacement screws will maintain clamping accuracy and prolong the insert’s serviceable life. Contact Metav Werkzeuge to specify Tungaloy finishing inserts for precise steel turning or request tailored recommendations for holder compatibility and process parameters Technical data Article number: 6998558 Manufacturer SKU: TUN6998558 SKU: 6998558-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Size: 16 mm Thickness: 3.97 mm Nose radius: 0.4 mm Relief angle: 11° Included angle: 60° Design & features Shape: triangular Hole: cylindrical hole + single‑side countersink (40°–60°) Grade: NS9530 Chipbreaker: PM Substrate: uncoated cermet Recommended application: Turning Compatibility note: ISO insert — holder compatibility by form, relief, tolerance, fastening, size, thickness FAQ What materials is this insert suited for? The TPMT16T304-PM NS9530 is formulated for turning steel with a finishing focus; the NS9530 uncoated cermet provides low cutting forces and excellent surface quality for continuous cuts. How does the insert index and tool life behave in finishing jobs? Thanks to the triangular ISO format and robust body, the TPMT16T304-PM from Tungaloy offers multiple usable edges and predictable tool life when used under recommended finishing conditions; SKU 6998558-Tungaloy identifies the exact article. What clamping features must the holder provide? The holder must accommodate the triangular ISO form, accept the cylindrical hole with single‑side countersink seating and match the insert thickness (3.97 mm) and relief angle for secure and repeatable clamping. Is this insert suitable for internal and external turning? Yes; the TPMT16T304-PM NS9530 is specified for both external and internal turning operations where a finishing grade and sharp cutting edge are required. Which chipbreaker should be selected for best surface finish? The PM chipbreaker paired with the NS9530 grade is recommended to favour surface quality and stable chip control during finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 NS9530 Wendeplatten - Tungaloy
TPMT 16T304 NS9530 — ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die TPMT 16T304 NS9530 ist eine ISO-genormte, dreieckige Drehwendeschneidplatte für feines Schlichten beim Drehen auf Stahl mit geringer Schnittkraft und hoher Oberflächengüte. TPMT16T304-PSS NS9530 von Tungaloy Unbeschichteter Cermet für feines Schlichten Scharfe Schneidkante für hohe Oberflächengüte Dreieckige Platte 16 mm mit 0,4 mm Eckenradius Mit zylindrischem Loch und Senkung 40°–60° Robustes Material für konstante Schlichtqualität Die Wendeschneidplatte besteht aus Hartmetall mit einem unbeschichteten Cermet der Sorte NS9530, ausgelegt auf Schlichtprozesse. Das Material sorgt für niedrige Schnittkräfte und eine hohe Oberflächengüte, was Nacharbeiten reduziert. Für Anwender bedeutet das weniger Ausschuss und höhere Teilequalität bei kontinuierlicher Schnittführung. Fachbegriffe: Cermet ist ein Keramik‑Metall‑Verbund, der Zähigkeit und Verschleißfestigkeit für Schlichtanwendungen kombiniert. Formgenauigkeit und sichere Spanntechnik für präzisen Einsatz Die Platte ist ISO-genormt und passt in Halter mit passender Form, Freiwinkel und Befestigung; der Freiwinkel 11° unterstützt scharfe Schneidkanten ohne Aufbauschneiden. Die dreieckige Form mit 16 mm Seitenlänge und 0,4 mm Eckenradius bietet eine gute Kombination aus Stabilität und Schnittpräzision. Das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht reproduzierbare Spannwerte und raschen Plattenwechsel in der Serienfertigung. Gezielter Einsatzbereich und Anwendernutzen Entwickelt für das Schlichten von Stahl, liefert die Sorte NS9530 saubere Oberflächen bei kleinen Zustellungen und kontinuierlichem Schnitt. Ideal ist die Platte für Präzisionswerkstätten, Serienfertiger und Werkzeugämter, die auf reproduzierbare Oberflächen und lange Standzeiten Wert legen. Erklärung: Schlichten bezeichnet feine Endbearbeitungen, bei denen Maßhaltigkeit und Oberfläche im Vordergrund stehen. Praxisvorteile bei Prozessplanung und Werkzeugauswahl In der täglichen Anwendung reduziert die Kombination aus scharfer Schneidkante und optimierter Spanformer‑Geometrie die erforderliche Schnittkraft, was Maschinenbelastung und Vibrationen verringert. Das Ergebnis ist ein stabilerer Prozess mit konstanteren Bauteilmaßen. Für Anwender bedeutet das: höhere Produktivität bei gleichbleibender Qualität und weniger Nacharbeit. Empfehlung: Für präzise Schlichtbearbeitung von Stahl empfiehlt sich die TPMT16T304-PSS NS9530 von Tungaloy; bei Fragen zur Einsetzbarkeit oder Schnittdaten steht die Beratung von Metav Werkzeuge gern zur Verfügung – Email: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6998540 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: TUN6998540 Fakten Eckenradius: 0,4 mm Winkel: 60° Plattendicke: 3,97 mm Plattengröße: 16 mm Freiwinkel: 11° Besonderheiten Material: Hartmetall Sorte: NS9530 (unbeschichtetes Cermet für Schlichten) Spanbrecher: PSS (Schlichtprofil) Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO‑Bezeichnung: 16T304 Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der TPMT16T304-PSS NS9530 bearbeiten? Die TPMT16T304-PSS NS9530 von Tungaloy ist speziell für das Schlichten von Stahl ausgelegt; die unbeschichtete Cermet‑Sorte NS9530 bietet niedrige Schnittkräfte und ausgezeichnete Oberflächengüten bei kontinuierlichem Schnitt. Passt die Platte in Standard‑ISO‑Halter? Ja, die Platte ist ISO‑genormt und kompatibel mit Haltern, die Form, Freiwinkel, Befestigung und Dicke für die TPMT‑Typen unterstützen; die Senkung am Loch gewährleistet sichere Spannbedingungen. Welche Vorteile bietet die Sorte NS9530 gegenüber Hartmetallbeschichtungen? Die Sorte NS9530 als unbeschichteter Cermet erzeugt besonders scharfe Schneidkanten und liefert bessere Oberflächen bei Schlichtoperationen, während Beschichtungen häufig auf Zerspanungsresistenz und höhere Schnittgeschwindigkeiten ausgelegt sind. Wie beeinflusst der Eckenradius von 0,4 mm die Bearbeitung? Der geringe Eckenradius 0,4 mm ermöglicht feine Schnittkanten und präzise Oberflächen bei kleinen Zustellungen; er reduziert Einflüsse auf die Schnittkraft und verbessert die Maßhaltigkeit bei Schlichtbearbeitung. Welche Rolle spielt der Spanbrecher PSS? Der Spanbrecher PSS ist für Schlichtprofile optimiert und sorgt dafür, dass Späne kontrolliert abfließen; das unterstützt einen stabilen Prozess und verhindert Spananhäufungen bei kontinuierlichen Schnitten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 16T304 NS9530 Wendeplatten - Tungaloy
High-precision finishing with the NS9530 cermet grade and a 0.4 mm corner radius ensures superior surface quality and reduced cutting forces; combined with ISO compatibility and a 3.97 mm plate thickness this insert supports reliable, repeatable turning operations — order directly via Metav Werkzeuge or consult our technical team for process matching. TPMT 16T304 NS9530 TPMT16T304-24 — Turning insert for finishing, Tungaloy TPMT16T304-24 NS9530 is an ISO-format triangular insert engineered for precision external and internal turning, optimised for fine finishing of steel components. TPMT 16T304 NS9530 finishing cermet grade Sharp cutting edge for fine surface quality Triangular insert with 0.4 mm corner radius ISO compatibility for standard turning holders Exceptional surface finish for finishing operations The NS9530 uncoated cermet grade is formulated for low cutting forces and a consistently sharp cutting edge, making it ideal for finishing passes on steel. As a finishing-focused grade, it performs particularly well with continuous cuts and small depths of cut, delivering improved surface integrity and reduced need for downstream polishing. The triangular geometry combined with a 0.4 mm corner radius supports delicate edge engagement while maintaining rigidity, so the result is a fine, repeatable surface finish and predictable tool life. Stable mounting and system compatibility for reliable production Compatibility with holders follows ISO standards: the insert form, 11° clearance, tolerance class, fixation, size and 3.97 mm plate thickness determine adapter selection. The TPMT16T304-24 format features a cylindrical hole with a single-sided countersink (40°–60°) for positive clamping and straightforward indexing. When assembled with an appropriate external holder, backing plate and standard clamping set, the modular system ensures repeatable positioning and easy replacement of worn inserts, which reduces downtime and simplifies process control in production environments. Practical machining guidance and material application For best results with this finishing insert, select feeds and speeds suitable for light finishing cuts; the uncoated cermet composition excels on steel where thermal and mechanical stability at the cutting edge improve surface results. The sharp edge geometry lowers cutting forces, which helps when machining thin-walled parts or when dimensional tolerance is critical. Where cutting conditions vary, pairing the insert with a stable holder and correct chip evacuation strategy will sustain performance. If additional machining parameters are required, the technical team can advise on optimal feeds, speeds and holder selection to suit the specific component geometry. Contact Metav Werkzeuge for a compatibility check or tailored tooling recommendations for the Tungaloy TPMT16T304-24 NS9530 finishing insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998564 Manufacturer SKU: TUN6998564 SKU: 6998564-Tungaloy Core technical data Shape: triangular Size: 16 mm Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.97 mm Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: 24 Design and special features Grade: NS9530 Cutting material: uncoated cermet Model series: ISO turning inserts Application: turning (external and internal) Typical system: ISO insert, matching external holder, backing/clamp set, spare screws FAQ What applications suit this finishing insert best? The TPMT16T304-24 NS9530 insert is intended for finishing operations in turning, especially for steel components where a sharp edge and low cutting forces produce superior surface quality. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility depends on the holder form, clearance, tolerance class, fixation, size and thickness—use matching ISO external holders and clamping sets. What materials is the NS9530 grade designed for? The NS9530 uncoated cermet is optimised for steel finishing; it is particularly effective in continuous cuts and small depth-of-cut applications. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius supports fine edge engagement for improved surface finish while maintaining adequate strength for repeatable finishing passes. Can the TPMT16T304-24 be used for internal turning? Yes, the insert geometry and grade are suitable for both external and internal turning when paired with the appropriate internal holder and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 T505 Wendeplatten - Tungaloy
Benefit from economical cast-iron machining thanks to the CVD-coated T505 grade and the CM chipbreaker, which ensure stable chip formation and consistent edge life; ISO conformity simplifies insert replacement and tool inventory. Order the TPMT16T304-CM T505 directly via Metav Werkzeuge or consult our technical team for application advice. TPMT 16T304 T505 triangular turning insert, CVD-coated carbide — Tungaloy A TPMT 16T304 T505 triangular turning insert designed for efficient external and internal turning of cast iron, offering robust chip control and ISO interchangeability CVD-coated carbide grade T505 CM chipbreaker for cast iron Triangular 16 mm insert, 60° included angle 0.4 mm corner radius for flexible cutting Reliable chip control for economic cast-iron turning The combination of a CVD-coated surface and the T505 carbide grade is tuned for economic machining of cast iron. The CM chipbreaker promotes stable chip formation even under varying cutting conditions, which reduces downtime for chip clearing and helps maintain cutting-edge integrity. For operations where stability and predictable wear are priorities, this specification supports longer tool life and consistent surface finish, making it a practical choice for batch production and routine component turning tasks. ISO-compatible design that simplifies tool management Compatibility follows ISO conventions: the insert’s triangular shape, 60° included angle, 11° relief and tolerance class determine fitting to corresponding external holders or boring bars. The system set-up typically comprises an ISO indexable insert, a matching holder or boring bar, a shim/clamp set and replacement screws. The central hole with a cylindrical bore and single-sided countersink (40°–60°) ensures secure clamping and reproducible seat datum. These factors together ease logistics and reduce set-up variability on the shop floor. Material and geometry for versatile turning results Constructed from carbide with CVD treatment, the grade is selected for a balance of wear resistance and edge toughness needed in cast-iron applications. The 0.4 mm corner radius enables both light roughing and finishing passes where small radii are beneficial to control cutting forces and surface integrity. For heavier stock removal or interrupted cuts, the CM chipbreaker and the T505 grade provide the necessary robustness; alternatively, selecting larger radii or different grades will better suit heavy-duty or high-feed operations. Overall, the insert’s geometry and coating deliver dependable performance across typical turning cycles. For precise cast-iron turning with the Tungaloy CVD-coated T505 grade, contact Metav Werkzeuge for order placement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6831881 Manufacturer SKU: TUN6831881 Label: TPMT16T304-CM T505 Model series: ISO turning inserts Application: Turning Core data Insert size: 16 mm Included angle: 60° Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.97 mm Design and features Shape: triangular Chipbreaker: CM Hole: cylindrical with single-sided countersink 40°–60° Grade/coating: T505, CVD-coated carbide Material: Carbide FAQ Is this insert suitable for machining cast iron? The TPMT16T304-CM T505 insert by Tungaloy is expressly intended for economical cast-iron machining; the T505 grade and CM chipbreaker provide controlled chips and consistent wear behaviour. Which holders fit this ISO insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening, size and thickness; the TPMT16T304-CM T505 mates with ISO-compatible triangular 16 mm external holders or boring bars that accept the specified 3.97 mm thickness. Can the insert be used for interrupted cuts? Yes, the combination of the CM chipbreaker and the T505 grade offers robustness for interrupted machining situations, provided the correct holder stability and cutting parameters are applied. What dimensions are most relevant when choosing this insert? Key dimensions are the 16 mm size, 60° included angle, 0.4 mm corner radius and 3.97 mm thickness; these determine seat fit, cutting edge geometry and compatibility with the toolholder. What benefits does the CVD coating bring for turning? The CVD coating on the T505 grade enhances wear resistance and edge stability, improving surface finish consistency and extending effective tool life in cast-iron turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a CVD‑coated T5115 grade and a secure clamping geometry for reliable cast iron turning and predictable tool life; order the insert through Metav Werkzeuge or consult the team for holder compatibility. TPMT 16T304 T5115 ISO turning insert — CVD‑coated carbide for cast iron by Tungaloy TPMT16T304-CM T5115 delivers ISO‑standard performance for external and internal turning, offering a universal grade optimised for cast iron applications. ISO‑standard triangular insert CVD‑coated carbide grade T5115 Designed for cast iron machining 0.4 mm corner radius, 11° relief Consistent productivity through balanced wear resistance and edge stability The CVD‑coated cemented carbide grade T5115 provides a calculated balance between wear resistance and edge stability, which translates into longer effective cutting life and fewer unplanned tool changes. As an ISO‑conforming triangular insert, this plate is intended for routine external and internal turning operations where repeatable dimensional results and steady tool performance are priorities. The universal nature of the grade means it is suitable for a wide range of cast iron variants, reducing inventory complexity while maintaining process reliability. Secure seating and precise geometry for repeatable results A geometry that includes a 0.4 mm corner radius, 11° relief angle and a 60° insert angle ensures stable cutting forces and a predictable surface finish. The plate thickness of 3.97 mm and the triangular form combine with a central fixing arrangement — a cylindrical hole with single‑sided countersink (40°–60°) — to provide secure clamping in compatible holders and boring bars. This construction minimizes micro‑movement at the cutting edge and supports consistent chip formation, which is particularly beneficial in high‑volume turning where fixture repeatability affects part conformity. Practical application guidance and operational benefit Equipped with the CM chipbreaker, the insert promotes controlled chip flow during cast iron machining and helps to avoid entangling swarf in confined setups. The ISO designation simplifies selection for standard toolholders, while the TPMT16T304-CM T5115 marking aids clear identification in tooling management systems. Choosing this insert can improve overall process efficiency by reducing downtime for tool changes and by delivering a reliable finish on cast iron components, supporting downstream operations and quality control. Contact Metav Werkzeuge for tailored advice on holder compatibility and to request a technical data sheet for the Tungaloy TPMT insert; reach the team via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6864805 SKU: 6864805-Tungaloy Manufacturer SKU: TUN6864805 Designation: TPMT16T304-CM T5115 Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 11° Insert angle: 60° Special features CVD‑coated carbide grade T5115 Chipbreaker type: CM Triangular form Central hole: cylindrical + single‑sided countersink (40°–60°) Application: turning, external and internal Material base: cemented carbide FAQ What materials is this insert recommended for? The TPMT16T304‑CM T5115 insert is specified primarily for cast iron machining; the CVD‑coated T5115 grade balances wear resistance and edge stability for that material class. Which holders are compatible with the TPMT16T304‑CM designation? Compatibility is determined by insert form, relief angle, tolerance class, fixation style, size and thickness; ISO‑standard holders for triangular TPMT inserts accommodate the TPMT16T304‑CM plate when matching parameters are observed. How does the CM chipbreaker affect performance? The CM chipbreaker promotes effective chip control in turning cast iron, reducing the risk of long, stringy chips and aiding consistent surface quality with the T5115 grade. Is this insert suitable for finishing and semi‑finishing? Yes; the 0.4 mm corner radius and stable edge properties of the T5115 grade make the insert appropriate for a range of finishing and semi‑finishing turning tasks in cast iron, depending on cutting conditions. How should the TPMT16T304‑CM be identified in stock control? Use the designation TPMT16T304‑CM T5115 together with SKU 6864805‑Tungaloy for unambiguous identification. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 16T304 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a triangular 60° geometry, and robust mounting for reliable, economical cast iron turning—order directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 16T304 T515 — ISO turning insert (triangular, 60°) by Tungaloy The TPMT16T304-CM T515 is an ISO triangular turning insert designed for economical machining of cast iron, featuring a CVD-coated carbide grade and a secure hole-and-countersink mounting. CVD-coated carbide grade T515 Optimised for economical cast iron machining Triangular 60° form with 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Consistent fit and predictable performance for ISO tooling systems The insert is manufactured to ISO-standard dimensions, so compatibility with holders is ensured by matching form, 11° clearance, tolerance class, fastening type, size and thickness. This standardisation simplifies tool selection and replacement, which reduces machine downtime. Where insert retention and repeatability are critical, the combination of the cylindrical hole plus the single-side countersink provides a reliable locating and clamping interface that maintains positional accuracy during interrupted cuts. Material and coating engineered for cost-effective cast iron turning Built from CVD-coated carbide in grade T515, the geometry supports economical machining of cast iron while offering stable chip formation under varied cutting conditions. The integrated CM chipbreaker is matched to the grade and intended to control chip shape and evacuation, improving process stability and surface integrity. Selection of this grade is advised when balancing cutting speed, tool life and workpiece stability, particularly for applications with frequent cut interruptions or medium cutting speeds. Geometry and mounting that improve edge strength and rigidity The 0.4 mm radius at the corner increases edge resilience, helping to resist chipping and extend service life in roughing operations, while the 3.97 mm thickness and 16 mm size contribute to the insert’s rigidity in the toolholder. The 60° triangular form allows three indexable cutting edges per insert, supporting economical edge changes. Supplied as part of a system—insert, external holder or boring bar, shim/clamp and replacement screws—this configuration provides a robust setup for steady productivity and consistent surface finish. For application recommendations or to secure this Tungaloy turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised advice and prompt processing. Technical Data Article number: 6747835 SKU: 6747835-Tungaloy Manufacturer SKU: TUN6747835 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: TPMT16T304-CM T515 Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 60° Hole: cylindrical with single-side countersink (40°–60°) Special features Material: CVD-coated carbide (grade T515) Chipbreaker: CM Shape: triangular (TPMT) Application: external and internal turning Compatibility: ISO standard; check holder form, tolerance, fastening, size and thickness System components: insert, external holder or boring bar, shim/clamp and replacement screws FAQ What materials is this insert intended for? The TPMT16T304-CM T515 is designed primarily for economical machining of cast iron; choose grade and chipbreaker to match workpiece stability and cutting conditions. How is compatibility with holders ensured? Compatibility is determined by the insert form, 11° clearance, tolerance class, fastening method, size and thickness; the cylindrical hole with countersink secures repeatable mounting. What advantages does the T515 grade offer? Grade T515 is a CVD-coated carbide grade optimised for cost-effective cast iron turning, offering stable chip formation and balanced tool life under appropriate cutting parameters. What mounting features does the insert have? The insert includes a cylindrical hole with a single-side countersink (40°–60°) for reliable clamping and positional accuracy in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that delivers stable wear resistance and optimised chip control for machining stainless steel; the triangular 16 mm format with a 0.4 mm corner radius and 11° clearance ensures repeatable seating and predictable cutting behaviour. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. TPMT16T304-PM T6215 – ISO turning insert, CVD-coated carbide for stainless steel TPMT16T304-PM T6215 is an ISO-format indexable insert designed for turning operations, suited to stable and slightly interrupted cuts in stainless steel. CVD-coated carbide grade T6215 Optimised chipbreaker PM 16 mm triangular form, 60° included angle 11° clearance with 0.4 mm corner radius High-performance wear resistance for consistent turning results The CVD-coated carbide composition T6215 provides a balanced combination of hardness and toughness, designed to extend tool life when machining stainless steel under stable conditions. The CVD coating reduces flank and crater wear, which translates into longer intervals between index changes and more predictable batch quality. For production-focused environments this means fewer interruptions and steadier dimensional tolerance control. Geometry engineered for secure clamping and repeatability The triangular 16 mm format with a 60° included angle and a 0.4 mm corner radius creates a stable cutting edge geometry that is easy to seat in standard ISO turning holders. The insert’s 3.97 mm thickness and the specified 11° clearance support rigidity in light to medium cutting forces. Compatibility with a holder depends on shape, clearance, tolerance class, fastening method, size and thickness; these parameters ensure reliable repeatability across tool changes and simplify setup procedures. Chip control and process stability through the PM chipbreaker The PM chipbreaker is tailored for the material and the grade; it promotes controlled, short chips when turning tough-to-machine stainless alloys, reducing the risk of chip entanglement and workpiece surface damage. Combined with the T6215 carbide substrate, the chipbreaker helps maintain cutting-edge integrity under fluctuating cut conditions, improving surface finish and lowering the likelihood of built-up edge formation. The result is higher process security and more efficient throughput. Practical selection and integration into existing tooling systems As an ISO-standard insert, the component integrates into established systems comprising the insert, a compatible external holder or boring bar, a seat/pad or clamp set and replacement screws. The presence of a cylindrical hole with a one-sided countersink (40°–60°) supports secure fixture and simplifies inventory handling. When selecting the chipbreaker and grade, preference should be given to combinations that match the workpiece alloy, machining mode and machine stability for optimal cost-efficiency and surface integrity. Contact Metav Werkzeuge for tailored application recommendations and ordering of Tungaloy TPMT16T304-PM T6215; technical consultants are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Manufacturer article number: 6877321 SKU: 6877321-Tungaloy Model series: ISO turning inserts Material: Carbide Grade/coating: T6215, CVD-coated Data Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Triangular insert shape PM chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for turning of stainless steel under stable to slightly interrupted conditions Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The TPMT16T304-PM T6215 insert is specified for machining stainless steel under stable to slightly interrupted cutting conditions, utilising the T6215 CVD-coated carbide for wear resistance. How does the PM chipbreaker affect machining? The PM chipbreaker promotes short, controlled chips when turning stainless alloys; on the TPMT16T304-PM the chip control helps protect the workpiece surface and reduces downtime associated with chip handling. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; standard ISO external holders and boring bars that accept a 16 mm triangular insert with a central hole are suitable for the TPMT16T304-PM. What are the key geometry values to note for setup? Key values include a 16 mm insert size, 3.97 mm thickness, 0.4 mm corner radius, 11° clearance and a 60° included angle, which influence seating, rigidity and cutting engagement. Is this an original Tungaloy part and how is it identified? Yes; the product is an original Tungaloy indexable insert identified by article number 6877321 and SKU 6877321-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 16T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade (T6215), precise 60° triangular geometry and reliable chip control for consistent stainless steel turning and reduced rework. The insert offers straightforward compatibility with ISO holders and a robust central fixing for secure clamping. Order the TPMT16T304‑PSS T6215 directly via Metav Werkzeuge or ask our consultants if needed. TPMT16T304‑PSS T6215 — ISO turning insert for stainless steel, 0.4 mm corner radius, Tungaloy The TPMT16T304‑PSS T6215 is an ISO‑standard triangular turning insert intended for external and internal turning, engineered for machining stainless steels under stable to slightly interrupted cutting conditions. CVD‑coated carbide for high wear resistance Optimised for stainless steel turning Triangular 60° insert with 0.4 mm radius Central hole with 40°–60° countersink Longer tool life through advanced coating and grade selection The combination of a CVD‑coated surface and a wear‑resistant carbide substrate in the T6215 grade delivers extended tool life and stable cutting action when machining stainless steel. A durable coating reduces abrasive wear and thermal degradation on the cutting edges, which translates to fewer indexings and lower overall tooling costs in continuous production runs. The PSS chipbreaker aids in producing short, controllable chips on ductile materials, improving surface quality and lowering the risk of built‑up edge during medium‑feed operations. Accurate geometry for secure clamping and predictable chip control A triangular insert with a 60° geometry and 0.4 mm corner radius gives a reliable compromise between strength and profile definition. The insert features a central hole with a cylindrical bore and a single‑sided countersink (40°–60°) to ensure positive seating and repeatable positioning in compatible ISO holders; the compatibility depends on form, clearance, tolerance class, fixing method, size and thickness. The 11° clearance and a plate thickness of 3.97 mm provide sufficient rigidity for stable cuts while allowing easy fitting into standard toolholders. Such geometry ensures predictable chip formation and reduces vibration when the tool is used within recommended parameters. Practical advantages and application guidance for production use Designed for both external and internal turning, the insert performs best in stable to mildly interrupted cutting conditions where the PSS chipbreaker promotes manageable chips and consistent surface finish. Selection of the chipbreaker and grade should correspond to workpiece stability and feed rates: choose the PSS variant and T6215 grade for ductile, adhesive‑prone stainless alloys to limit built‑up edge and keep cycle times steady. Using this insert as part of a complete system—insert, appropriate holder, shim/underlay and correct clamping screw—helps achieve reproducible results, lower scrap rates and an efficient production flow. For application advice, stock availability or to order Tungaloy inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific stainless steels and machining conditions Technical data Article number: 6876777 SKU: 6876777-Tungaloy Manufacturer SKU: TUN6876777 Brand: Tungaloy Model series: ISO turning inserts Core data Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate thickness: 3.97 mm Plate size: 16 mm Design & features CVD‑coated carbide (T6215) PSS chipbreaker Triangular shape Central hole with cylindrical bore + single‑side countersink (40°–60°) Intended use: turning (external and internal) Compatibility: ISO holders determined by form, clearance, tolerance, fixing, size and thickness Suitable for machining stainless steels under stable to mildly interrupted conditions FAQ What materials is this insert suitable for? The TPMT16T304‑PSS T6215 is specified for machining stainless steels and performs best under stable to slightly interrupted cutting conditions. How does the PSS chipbreaker affect machining results? The PSS chipbreaker promotes short, controlled chips on ductile materials, helping to avoid long stringy chips and improving surface finish during turning with the T6215 grade. Which geometry and dimensions should be noted when selecting a holder? Key dimensions are the 60° geometry, 0.4 mm corner radius and 3.97 mm thickness; the insert’s central hole with countersink requires a matching clamping system for correct seating. Can this insert be used for internal turning as well as external turning? Yes, the insert is designed for both external and internal turning applications when used in suitable ISO‑compatible holders. What is the intended workpiece condition for best performance? Best results with this grade and chipbreaker are achieved on stable to mildly interrupted cuts; severe interruptions or unstable setups will reduce performance and tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 16T304 T9215 PSF Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise ISO geometry and a compact 0.4 mm corner radius for consistent productivity in medium steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. TPMT16T304-PSF T9215 — ISO triangular turning insert (CVD-coated carbide) by Tungaloy for turning The TPMT16T304-PSF T9215 is an ISO triangular turning insert designed for medium steel machining, offering a balanced mix of wear resistance and fracture toughness for continuous to slightly interrupted cuts CVD-coated carbide grade T9215 for steel machining Triangular ISO insert, 16 mm, radius 0.4 mm 11° clearance angle for stable cutting Cylindrical hole with single-side countersink (40°–60°) High productivity through durable CVD coating and robust grade The TPMT16T304-PSF T9215 is specified for medium steel and combines a CVD-coated carbide substrate with the T9215 grade to extend tool life while maintaining chip control under production conditions. The CVD layer reduces abrasive wear and preserves the cutting edge, which directly translates into fewer indexings and longer uninterrupted running times. For operations focused on output, this means improved process economy and a predictable tool-change rhythm. Stable geometry and secure clamping for repeatable surface quality The triangular ISO form and the integrated hole with a cylindrical bore plus single-side countersink (40°–60°) ensure reliable seating and clamping in compatible holders. The 0.4 mm corner radius and 11° clearance angle are tuned to balance cutting forces and surface finish, enabling consistent results across batches. The standardised geometry also simplifies tool preparation: matching holders, shims and clamping kits provide repeatable assembly and a defined datum for accurate insert indexing. Practical application scope and system compatibility guidance Designed for both external and internal turning, the insert with the PSF chipbreaker is best applied where medium steels are machined under continuous to slightly interrupted cutting conditions. The product forms part of an ISO insert system comprising insert, matching external holder or boring bar, and the required shim/clamp set plus spare screws. Selection of the correct chipbreaker and stable clamping are decisive for achieving the intended productivity and surface integrity; for complex mixes of interrupted cuts, choose holders and cutting parameters that prioritise rigidity. For high-productivity turning with proven tool reliability, contact Metav Werkzeuge for availability of the Tungaloy TPMT16T304-PSF T9215 insert and tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6774077 Manufacturer SKU: TUN6774077 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features CVD-coated carbide, grade T9215 Chipbreaker: PSF Triangular insert form With hole; cylindrical hole + single-side countersink (40°–60°) Suitable for external and internal turning System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What materials is the TPMT16T304-PSF T9215 suitable for? The TPMT16T304-PSF T9215 is optimised for medium steels; the CVD-coated carbide grade T9215 combines wear resistance with fracture toughness for continuous to slightly interrupted cutting. How does the PSF chipbreaker affect performance? The PSF chipbreaker on the TPMT16T304-PSF T9215 promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related damage during turning. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, hole style, clearance angle and thickness; the TPMT16T304-PSF T9215 fits ISO-compatible triangular holders and boring bars designed for 16 mm triangular inserts. What surface quality can be expected with a 0.4 mm corner radius? With a 0.4 mm corner radius, the TPMT16T304-PSF T9215 provides a compromise between edge strength and achievable surface finish, suitable for general finishing and semi-finishing passes on medium steels. What indicates the T9215 grade advantage over conventional grades? The T9215 grade offers enhanced wear resistance and good fracture safety under productive machining conditions, making the TPMT16T304-PSF T9215 a first choice for medium-steel production runs Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com