VCMT 110308 T9215 Wendeplatten - Tungaloy
VCMT110308-TM T9215 ISO-Drehwendeschneidplatten zum Drehen VCMT110308-TM T9215 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen von Stahl und bietet eine robuste Kombination aus Verschleißwiderstand und Bruchsicherheit VCMT110308-TM T9215 von Tungaloy CVD-beschichtetes Hartmetall für mittlere Stahlbearbeitung Hoher Verschleißwiderstand bei kontinuierlichem Schnitt Rhombische Form, Plattengröße 11, Radius 0,8 mm Zylindrisches Loch + einseitige Senkung 40°–60° Hohe Prozesssicherheit und Wirtschaftlichkeit für Stahlzerspanung Die VCMT110308-TM T9215 nutzt CVD-beschichtetes Hartmetall, das speziell für die mittlere Stahlbearbeitung entwickelt wurde. Durch die Beschichtung verbessert sich der Verschleißwiderstand, sodass Setups mit kontinuierlichem bis leicht unterbrochenem Schnitt produktiver laufen. Anwender profitieren von längeren Standzeiten und planbarer Werkzeugkostenstruktur, was die Wirtschaftlichkeit in Serienprozessen deutlich erhöht. Designmerkmale für stabile Spanbildung und einfache Montage Die rhombische Plattenform mit Eckenradius 0,8 mm und Plattendicke 3,18 mm sorgt für stabile Einspannverhältnisse und kontrollierte Spanabfuhr. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die Befestigung in ISO-kompatiblen Haltern; Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Diese Kombination reduziert Ausfallzeiten durch Nacharbeiten und vereinfacht den Werkzeugwechsel. Geeignetes Einsatzfeld und Anwendernutzen Konzipiert für das Außen- und Innendrehen auf Stahl, liefert die Sorte T9215 eine ausgewogene Mischung aus Bruchsicherheit und Zähigkeit, ideal für produktive Fertigungsumgebungen. Fertigungsleiter und Zerspanungsfachleute nutzen diese Wendeschneidplatte, um Durchsatz zu erhöhen und Oberflächengüten zu stabilisieren. Durch klare Spezifikationen lassen sich Schnittdaten effizient ableiten und reproduzierbar einsetzen. Für eine spürbare Produktivitätssteigerung bei der Stahlzerspanung empfiehlt sich der Einsatz der VCMT110308-TM T9215 von Tungaloy; bei technischen Fragen oder zur Auswahl passender Halter steht die Beratung per E‑Mail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6951582 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110308-TM Artikelname: VCMT110308-TM T9215 SKU: TUN6951582 Fakten Eckenradius: 0,8 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstoff: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: TM Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen Kompatibilität: ISO-genormte Halter beachten (Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke) FAQ Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Die VCMT110308-TM T9215 von Tungaloy ist für die mittlere Stahlbearbeitung ausgelegt und bietet optimale Ergebnisse bei kontinuierlichem bis leicht unterbrochenem Schnitt. Passt die Platte in alle ISO-Halter mit rhombischer Aufnahme? Die Platte ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Bei Unsicherheiten hilft die technische Beratung weiter. Welche Vorteile bringt die CVD-Beschichtung der Sorte T9215? Die CVD-Beschichtung erhöht den Verschleißwiderstand und verbessert die Standzeit, ohne die Bruchsicherheit einzuschränken, was die Produktivität in Serienprozessen steigert. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9215 verbindet Zähigkeit mit Verschleißfestigkeit und eignet sich für kontinuierliche sowie leicht unterbrochene Schnitte. Welche Rolle spielt der Spanbrecher TM? Der Spanbrecher TM ist auf kontrollierte Spanformung ausgelegt und unterstützt stabile Zerspanungsbedingungen sowie eine sichere Spanabfuhr. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a precise 0.8 mm corner radius, and a proven PS chipbreaker to boost productivity in medium steel turning; compatibility with ISO holders ensures reliable clamping and repeatable results. Order compatible inserts and replacement screws directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. VCMT 110308 T9215 — ISO turning insert for Turning (Tungaloy) VCMT110308-PS T9215 is an ISO-indexable turning insert designed for general external and internal turning in medium steels, combining wear resistance and toughness for productive, repeatable machining. ISO-design 110308 for standard holders CVD-coated carbide grade T9215 PS chipbreaker for medium steel 0.8 mm corner radius for strength Consistent tool life and higher throughput from CVD-coated carbide The CVD-coated T9215 grade combines high wear resistance with sufficient fracture toughness, making it a reliable choice for continuous to slightly interrupted cuts in medium steel. As an indexable insert, the geometry and coating reduce flank and crater wear, translating into longer in-service life and fewer tool changes; this supports steady machine utilisation and lower downtime. The result is improved part consistency and better cost per component compared with uncoated or less suitable grades. Secure seating and repeatable clamping for precision turning Engineered to the ISO 110308 form, the insert's rhombic shape, 11 mm inscribed size and 3.18 mm thickness match standard holder pockets, while the 7° clearance and cylindrical hole with single-side countersink (40°–60°) ensure secure clamping and accurate seat orientation. The defined geometry and tolerance compatibility minimise vibration and chatter, improving surface finish and allowing stable cutting parameters. Clear specification of these dimensions aids straightforward holder selection and repeatable setups. Practical selection guidance for shops and toolrooms The PS chipbreaker controls chip form effectively in medium steels, promoting safe evacuation and reducing the risk of built-up edge. A 0.8 mm corner radius offers a balance between edge strength and surface finish — suitable for general-purpose turning where both robustness and acceptable profile accuracy are required. For specialised tasks or different materials, select an alternative chipbreaker or radius; for questions about optimal combinations and cutting data, the listed contacts can advise on the best configuration for stable, productive machining. Contact Metav Werkzeuge for Tungaloy CVD-coated T9215 inserts to specify VCMT110308-PS for your turning operations and request compatible holder recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer item no.: 6772493 SKU: 6772493-Tungaloy Manufacturer SKU: TUN6772493 Application: Turning Model series: ISO turning indexable inserts Label: VCMT110308-PS T9215 Facts Inscribed size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Approach angle: 35° Special features Material: Carbide Coating/grade: CVD-coated T9215 Chipbreaker: PS Shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) ISO designation: VCMT110308-PS Suitable for medium steel machining Compatible with ISO holders (form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert best suited for? The VCMT110308-PS T9215 insert from Tungaloy is formulated for medium steels, where the CVD-coated T9215 grade offers a balanced combination of wear resistance and fracture toughness for productive turning. Which holder features must match the insert? Compatibility depends on holder form, clearance angle (7°), tolerance class, fastening method, size (11 mm) and thickness (3.18 mm); specifying ISO 110308 in the holder design ensures correct seating for the VCMT110308-PS. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip formation for medium-steel turning, reducing entanglement and improving evacuation, which supports uninterrupted production and safer handling. Can this insert be used for internal turning operations? Yes — the geometry and chip control make the insert suitable for both external and internal turning operations, provided the selected holder affords the necessary clearance and rigidity. Why choose a 0.8 mm corner radius? A 0.8 mm corner radius is a compromise between edge strength and surface finish: it increases resistance to edge chipping while maintaining acceptable profile fidelity for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high productivity, reliable wear resistance and straightforward holder compatibility for efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. VCMT 110308 T9215 — VCMT110308-PSS indexable turning insert by Tungaloy, CVD-coated, PSS chipbreaker A VCMT110308-PSS T9215 rhombic, ISO-format indexable insert designed for productive external and internal turning of medium steel with continuous to lightly interrupted cuts. CVD-coated cemented carbide grade T9215 Optimised for medium steel turning Rhombic ISO form VCMT 110308 Through-hole with 40°–60° countersink Boosted productivity through wear-resistant coating and grade selection The combination of a CVD-coated surface and cemented carbide substrate in this grade delivers a clear productivity advantage when machining medium steels. The T9215 grade balances high wear resistance with fracture toughness, which translates into longer effective cutting life under continuous cutting and slight interruptions. Selecting an insert with these properties reduces unplanned tool changes and supports more predictable cycle times, making process planning simpler and more economical. The PSS chipbreaker is tuned for reliable chip control in steel, helping to maintain surface quality and reduce secondary operations. Seamless integration with existing tooling systems Designed as an ISO-standard insert in VCMT 110308 format, this rhombic geometry ensures broad compatibility with common external holders and boring bars when the holder matches form, clearance angle, tolerance class, clamping and thickness. The insert features a through-hole with a cylindrical bore and a one-sided countersink (40°–60°), simplifying secure clamping and repeatable seating. With a nose radius of 0.8 mm, the profile provides a balance between strength and surface finish, suitable for finishing to medium-roughing cuts. Understanding these key dimensions avoids guesswork at setup and supports fast tool changes on the shop floor. Stable chip control and predictable tool life for consistent results The integrated PSS chipbreaker and the mechanical characteristics of the insert support stable chip formation across typical turning feeds and depths used for medium steel. This leads to fewer interruptions, improved surface integrity and reduced risk of built-up edge. For workshops pursuing process reliability, the insert’s geometry and grade provide a consistent performance window that reduces variability between batches. Where higher productivity is required, the combination of the T9215 grade and the insert’s geometry helps maintain a balance between cutting edge stability and wear resistance, ensuring repeatable outcomes on serial parts. For tailored machining recommendations and rapid supply of Tungaloy VCMT 110308 T9215 inserts, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773976 Manufacturer SKU: TUN6773976 SKU: 6773976-Tungaloy Model series: ISO turning indexable inserts Designation: VCMT110308-PSS T9215 Core dimensions & ratings Shape: Rhombic, ISO VCMT 110308 Nose radius: 0.8 mm Thickness: 3.18 mm Size: 11 mm Free (clearance) angle: 7° Wedge angle: 35° Hole: Through hole with cylindrical bore and one-sided countersink (40°–60°) Materials, coating & applications Substrate: Cemented carbide Coating: CVD Chipbreaker: PSS Intended use: Turning (external and internal) Best suited for: Medium steel machining, continuous to light interrupted cuts System: ISO insert, compatible with matching external holders and boring bars FAQ What materials is this insert best suited for? This insert is designed primarily for medium steel; the T9215 carbide grade and CVD coating combine to offer wear resistance and toughness suited to continuous to lightly interrupted steel turning. Which chipbreaker does the insert use and what is its benefit? The insert incorporates the PSS chipbreaker, which promotes reliable chip control in steel machining, improving surface quality and reducing the risk of chip-related interruptions. How does the insert mount to a holder? Mounting depends on matching the ISO VCMT 110308 form, clearance angle, tolerance class, clamping and thickness; the insert has a through-hole with a cylindrical bore and a one-sided countersink (40°–60°) for secure clamping. What advantages does the T9215 grade offer in production? The T9215 grade offers a balance of high wear resistance and fracture toughness, enabling longer cutting life and consistent performance for productive turning of medium steels. Is the insert suitable for interrupted cuts? Yes; the insert is suitable for continuous and lightly interrupted cuts. For heavy interruptions, a tool and grade reassessment is recommended to ensure edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide robustness, a TSF chipbreaker tuned for steel turning, and a compact 0.8 mm corner radius to maintain stable cutting under variable conditions; order the insert directly via Metav Werkzeuge or consult our technical advisers for integration support. VCMT110308-TSF T9225 ISO turning insert — CVD-coated carbide, 0.8 mm radius (Tungaloy) VCMT110308-TSF T9225 is an ISO-standard rhombic turning insert designed for medium to heavy steel turning with a TSF chipbreaker for consistent chip control CVD-coated carbide T9225 TSF chipbreaker for steel turning Rhombic ISO shape, 11 mm inscribed circle 0.8 mm corner radius Cylindrical hole with countersink (40°–60°) High-performance carbide for consistent metal removal The insert is made from CVD-coated carbide, a choice that balances wear resistance with toughness for demanding turning operations. The T9225 grade is formulated for robust, universal performance in medium to heavy steel machining where variable engagement or mildly interrupted cuts require extra edge tenacity. This results in a more reliable cutting edge life and fewer unplanned tool changes, improving machine uptime and process stability. Precision geometry that supports process security With an ISO rhombic form and a defined relief angle of 7°, the geometry promotes stable tool clamping and predictable cutting behaviour. The 0.8 mm corner radius delivers a compromise between edge strength and surface finish, allowing for modest machining forces while still achieving consistent component geometry. The TSF chipbreaker is optimised for steel applications, helping to form short, controlled chips that ease evacuation and reduce the risk of entanglement. Compact design for straightforward integration The insert follows ISO standards and is compatible with corresponding turning holders by form, tolerance and mounting style; the cylindrical hole with a single-sided countersink (40°–60°) secures repeatable positioning and simple replacement. A nominal plate thickness of 3.18 mm and an 11 mm inscribed circle make the insert suitable for a wide range of external and internal turning set-ups, enabling flexible tool inventory management in job shops and production environments. Operator and shop-floor benefits Using a grade optimised for changing cutting conditions reduces downtime from chipping or premature wear, translating into a measurable process advantage. The combination of a reliable chipbreaker and robust substrate supports more stable feeds and depths of cut, which can increase material removal rates without compromising surface quality. For maintenance, the insert’s standard ISO design allows straightforward stocking and quick exchange, simplifying tool logistics and operator training. Discuss application details with Metav Werkzeuge to match the VCMT110308-TSF T9225 to a holder and machining strategy; technical advisers are available via email or phone for integration guidance. Technical data Article number: 6951543 SKU: 6951543-Tungaloy Manufacturer SKU: TUN6951543 Model series: ISO turning inserts Designation: VCMT110308-TSF T9225 Material: carbide Numbers / Core technical data Inscribed circle: 11 mm Plate thickness: 3.18 mm Relief angle: 7° Included angle: 35° Corner radius: 0.8 mm ISO code: 110308 Special features / Versions TSF chipbreaker optimised for steel turning CVD-coated grade T9225 for robustness and wear resistance Rhombic plate form with central hole and single-sided countersink (40°–60°) Intended application: external and internal turning Compatibility: ISO-standard clamping and holders FAQ What materials is this insert best suited to machine? The VCMT110308-TSF T9225 is tailored for medium to heavy steel machining; the CVD-coated T9225 grade provides toughness and wear resistance for variable engagement and lightly interrupted cuts. Which holders are compatible with the insert? Compatibility is determined by ISO form, thickness and hole style; the rhombic shape, 11 mm inscribed circle and central hole with countersink allow use with standard ISO rhombic turning holders designed for 110308 inserts. How does the TSF chipbreaker affect chip control? The TSF chipbreaker is designed to generate short, manageable chips in steel turning, improving evacuation and reducing the chance of chip re-cutting and tangling during medium to heavy cutting. Can this insert be used for finishing operations? With a 0.8 mm corner radius and the specified geometry, the insert can achieve decent surface finishes in semi-finish and some finishing passes, though dedicated fine-finishing grades may be preferred for the highest surface-quality demands. Is the insert resharpenable or intended as indexable only? This insert is an indexable ISO turning grade intended for indexing to fresh cutting edges rather than regrinding; its design prioritises repeatable edge geometry and straightforward replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide toughness, a 0.8 mm corner radius and ISO compatibility for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or request advice from our consultants. VCMT 110308 T9225 — Indexable turning insert for medium to heavy steel machining by Tungaloy A VCMT110308-PS T9225 rhombic indexable insert for turning, designed as a robust universal grade for interrupted and variable cutting conditions in steel machining CVD-coated carbide grade T9225 for toughness PS chipbreaker for secure chip control Rhombic 11 mm size with cylindrical hole and countersink Consistent cutting performance under variable conditions The CVD‑coated carbide composition of this insert delivers a balance of wear resistance and toughness that suits medium to heavy steel machining. The T9225 grade is formulated for applications where machining conditions change or slight interruptions occur, providing reliable edge strength and reduced flank wear. With a 0.8 mm corner radius, the insert stabilises cutting forces on deeper cuts and increases tool life compared with finer radii, which benefits longer production runs and reduces unscheduled tool changes. Clear mount and geometry details to ensure correct holder choice Compatibility with toolholders follows ISO standards and depends on form, 7° clearance, tolerance class, fastening and thickness. The insert is rhombic with an effective 11 mm inscribed circle and a plate thickness of 3.18 mm, fitted with a cylindrical hole and one‑sided countersink (40°–60°). The specified 35° approach angle and the PS chipbreaker influence rake and chip flow; selecting a matching external holder or boring bar that accommodates these geometries minimises set‑up time and ensures repeatable clamping accuracy for stable machining. Productivity and application advantages for workshop workflows Designed for both external and internal turning, this grade supports efficient metal removal in tougher operations without sacrificing surface quality. The PS chipbreaker promotes predictable chip control in varied cuts, helping to avoid chip entanglement and to maintain consistent cycle times. Choosing a universal, robust insert such as this reduces inventory complexity while still offering the resilience needed in mixed‑batch production, delivering measurable gains in uptime and process reliability when paired with correctly specified holders and cutting parameters. For technical guidance on integrating Tungaloy grade T9225 inserts into production or to arrange supply via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on holder compatibility and cutting data Technical Data Article number: 6781160 Manufacturer SKU: TUN6781160 Label: VCMT110308-PS T9225 Designation: VCMT110308-PS T9225 Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Clearance angle: 7° Approach angle: 35° Special features CVD‑coated carbide (T9225) PS chipbreaker Rhombic plate form With cylindrical hole + one‑sided countersink (40°–60°) ISO series for turning; suitable for external and internal turning on steel FAQ Which holders are compatible with this insert? Compatibility depends on holder form, clamp method, tolerance class and plate thickness; choose an ISO‑standard turning holder that accepts rhombic VCMT‑style inserts and matches the 7° clearance and 3.18 mm plate thickness for secure mounting of the VCMT110308‑PS T9225 insert. Is this insert suitable for interrupted cuts? Yes. The T9225 CVD‑coated grade is formulated for moderate to heavy machining and offers the additional toughness required for interrupted cuts and variable engagement conditions. What materials can be machined with this insert? This insert is intended for steel machining, particularly for medium to heavy operations where a robust universal grade and the PS chipbreaker ensure controlled chip formation. How should the insert be clamped and oriented? Use an ISO‑compatible rhombic holder matched to the 11 mm size and 35° approach angle; ensure the cylindrical hole with countersink aligns with the clamping screw and that the tolerance class of the holder supports repeatable seating of VCMT110308‑PS T9225. What benefit does the PS chipbreaker provide? The PS chipbreaker promotes short, controlled chips in steel turning, improving surface finish and reducing the risk of chip entanglement, which supports safer, more productive machining cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 T9225 Wendeplatten - Tungaloy
VCMT 110308 T9225 Drehwendeschneidplatte zum Drehen – Tungaloy VCMT 110308 T9225 ist eine ISO-genormte rhombische Wendeschneidplatte für das Außen- und Innendrehen, ausgelegt für mittlere bis schwere Stahlbearbeitung Universalsorte für wechselnde Schnittbedingungen CVD-beschichtetes Hartmetall für lange Standzeit Rhombische Platte mit Radius 0,8 mm Mit zylindrischem Loch und einseitiger Senkung Kompatibel zu ISO-Drehhaltern und Bohrstangen Wirtschaftliche Zerspanung bei wechselnden Bedingungen Die Wendeschneidplatte bietet eine robust ausgelegte Sorte T9225, die speziell für mittlere bis schwere Stahlbearbeitung entwickelt ist. Durch die CVD-Beschichtung verbessert sich die Verschleißfestigkeit, was die Werkzeugstandzeit erhöht und Maschinenlaufzeiten reduziert. Anwender profitieren von konstanter Spanbildung und weniger Stillstandszeiten, was die Produktivität in der Fertigung nachhaltig steigert. Präzision und Stabilität für saubere Oberflächen Mit dem Eckenradius 0,8 mm und dem Rhombus-Formfaktor lassen sich reproduzierbare Schnittbilder erzielen. Die Kombination aus Frewinkel 7° und der Plattendicke sorgt für stabile Schneidkanten bei wechselnder Eingriffsbedingung. Das Ergebnis sind verbesserte Oberflächengüten und geringerer Nacharbeitaufwand bei Serien- und Einzelteilfertigung. Einfache Integration und sichere Befestigung Die Platte ist ISO-genormt und verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), wodurch die Montage auf gängigen Außenhaltern oder Bohrstangen schnell und präzise erfolgt. Konstrukteure und Einrichter können die Platte ohne Sonderlösungen einsetzen, was Rüstzeiten verkürzt und die Prozessstabilität erhöht. Einsatzempfehlung und Werkstoffabdeckung Diese Wendeschneidplatte eignet sich besonders für Stahlwerkstoffe und Anwendungen mit leicht unterbrochenem Schnitt, bei denen erhöhte Zähigkeit gefragt ist. Dank der universellen Charakteristik der Sorte T9225 deckt die Platte ein breites Spektrum an Werkstoffen ab und bietet dadurch hohe Wirtschaftlichkeit für wechselnde Fertigungsaufgaben. Für präzise und produktive Drehprozesse empfiehlt Metav Werkzeuge die Verwendung der VCMT 110308 T9225 von Tungaloy; bei Fragen zur Anwendung oder zur Halterkompatibilität erreichen Sie unseren technischen Vertrieb unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Technische Daten Technische Daten Artikelnummer: 6781313 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6781313 Bezeichnung: VCMT110308-PSS Ausführung: VCMT110308-PSS T9225 Daten Radius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Plattenform: rhombisch Mit Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: PSS (stabile Spanbildung, universell) Schneidstofftyp: CVD-beschichtetes Hartmetall Material: Hartmetall Modellserie: ISO-Drehwendeschneidplatten Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) FAQ Wie lässt sich die Kompatibilität der Platte prüfen? Die Kompatibilität wird über Form, Freiwinkel, Befestigung, Größe und Dicke bestimmt. Für die VCMT 110308 T9225 empfiehlt es sich, Halter mit passender Aufnahme für rhombische ISO-Platten und Befestigung durch zylindrisches Loch mit Senkung zu verwenden. Für welche Werkstoffe ist die VCMT110308-PSS T9225 geeignet? Die VCMT110308-PSS T9225 von Tungaloy ist primär für Stahl ausgelegt und bietet gute Performance bei leicht unterbrochenem Schnitt sowie wechselnden Eingriffsbedingungen. Welchen Vorteil bringt die CVD-Beschichtung bei dieser Platte? Die CVD-Beschichtung der T9225 erhöht die Verschleißfestigkeit und verbessert die thermische Stabilität der Schneidkante, was zu längeren Standzeiten und konstanteren Bearbeitungsergebnissen führt. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius 0,8 mm der VCMT110308-PSS sorgt für ausgeglichene Kantentragfähigkeit und ermöglicht saubere Oberflächen bei gleichzeitig guter Schneidkantenstabilität. Welche Rolle spielt der Spanbrecher PSS bei der Bearbeitung? Der Spanbrecher PSS fördert eine stabile Spanbildung und ist besonders vorteilhaft bei variierenden Schnitttiefen und bei der Bearbeitung von Stahl, da er das Spanverhalten kontrolliert und Werkzeugstandzeiten verbessert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 T9225 Wendeplatten - Tungaloy
VCMT 110308 T9225 ISO-Drehwendeschneidplatten für Drehen, Tungaloy VCMT 110308 T9225 ist eine ISO-genormte Wendeschneidplatte für Außen- und Innendrehen, entwickelt für mittlere bis schwere Stahlbearbeitung mit wechselnden Eingriffsbedingungen CVD-beschichtetes Hartmetall für gute Verschleißfestigkeit Universalsorte T9225 für wechselnde Schnittbedingungen Rhombisch 11 mm Plattenform für vielseitige Anwendung Eckenradius 0,8 mm für stabile Spanbildung Mit zylindrischem Loch und einseitiger Senkung (40°–60°) Wirtschaftliche Lösung für produktive Stahlzerspanung Die Wendeschneidplatte bietet durch das CVD-beschichtete Hartmetall eine Kombination aus Zähigkeit und Verschleißfestigkeit, die bei variierenden Schnittbedingungen von Vorteil ist. Dadurch lassen sich Rüstzeiten reduzieren und die Standzeit steigern, was insbesondere in der Serienfertigung und im Werkstattbetrieb zu messbaren Produktivitätsgewinnen führt. Die Sorte T9225 ist als robuste Universalsorte ausgelegt und eignet sich, wenn leichte Unterbrechungen im Schnitt oder schwankende Zustellungen höhere Zähigkeit erfordern. Passgenauigkeit und mechanische Integration im Systemaufbau Bei ISO-genormten Platten entscheidet die exakte Form- und Maßanpassung über die Kompatibilität zum Halter. Die rhombische Geometrie mit 11 mm Kantenlänge und 3,18 mm Plattendicke ermöglicht eine einfache Montage in standardisierten Außenhaltern oder Bohrstangen; der Freiwinkel von 7° und der Winkel von 35° unterstützen stabilen Spanfluss und gute Oberflächengüte. Das zylindrische Loch mit einseitiger Senkung sorgt für präzise Sitzlage und einfache Fixierung mittels Unterlage oder Klemmsatz. Einsatzfelder, Spanformer und Bearbeitungsstrategie Die Platte ist für Außen- und Innendrehen ausgelegt; der eingesetzte Spanformer TM empfiehlt sich bei mittleren bis schwereren Schnittbedingungen, da er die Spanbildung kontrolliert und den Spanablauf verbessert. Anwender in metallverarbeitenden Betrieben, Instandhaltung und Lohnfertigung profitieren von der Vielseitigkeit: ob Rohteilausformung, Schruppen oder Vorschlichten, die Kombination aus Geometrie und Schneidstoff erlaubt stabile Bearbeitungsparameter. Fachliche Einordnung der Beschichtung und Materialhinweise Die CVD-Beschichtung (chemische Gasphasenabscheidung) auf dem Hartmetallträger liefert eine harte, haftfeste Deckschicht, die besonders gegen Abrasion bei Stahlanwendungen schützt. Das Grundmaterial Hartmetall sorgt parallel für die nötige Zähigkeit bei wechselnden Eingriffen. Für die Auswahl von Schneidstoff und Spanformer empfiehlt sich eine Abstimmung auf Werkstoff, Bearbeitungsart und Schnittstabilität, um optimale Schnittwerte zu realisieren. Für Anfragen zur Verfügbarkeit und zur optimalen Anwendung der Tungaloy VCMT 110308 T9225 wenden Sie sich gern an unseren technischen Vertrieb per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 — wir beraten praxisnah und anwendungsorientiert Produktmerkmale Artikelnummer: 6951583 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110308-TM T9225 Hersteller SKU: TUN6951583 SKU: 6951583-Tungaloy Fakten Eckenradius: 0,8 mm Plattengröße: 11 mm Plattendicke: 3,18 mm Freiwinkel: 7° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Sorte: T9225 Spanbrecher: TM Lochart: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch FAQ Welche Werkstoffe sind für diese Wendeschneidplatte geeignet? Die Tungaloy VCMT 110308 T9225 ist für mittlere bis schwere Stahlbearbeitung optimiert; durch die CVD-Beschichtung und die robuste Sorte T9225 eignet sich die Platte besonders für wechselnde Eingriffsbedingungen und leicht unterbrochene Schnitte. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 0,8 mm sorgt für eine stabile Spanbildung und reduziert Kerbwirkung bei schruppenden Zustellungen, wodurch die Standzeit der Wendeschneidplatte positiv beeinflusst wird. Welche Vorteile bietet der Spanformer TM? Der Spanformer TM verbessert den Spanablauf und reduziert Verstopfungen, was insbesondere bei variierenden Zustellungen und schwereren Schnitten die Prozesssicherheit erhöht. Worauf ist bei der Montage zu achten? Bei der Montage sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte auf den Halter abzustimmen; das zylindrische Loch mit einseitiger Senkung ermöglicht eine präzise Positionierung und sichere Fixierung. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die Auslegung der Geometrie und die Sortenzusammenstellung machen die Platte sowohl für Außen- als auch für Innendrehanwendungen einsetzbar. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160402 AH6225 Wendeplatten - Tungaloy
Combining the PVD-coated AH6225 grade with a 0.2 mm corner radius and a secure clamping hole, this insert offers reliable edge life and consistent mid-range turning performance on stainless steels; order directly via Metav Werkzeuge or consult our technical advisors for application-specific setup. VCMT 160402 AH6225 ISO turning insert for turning – Tungaloy A VCMT 160402 AH6225 is an ISO indexable turning insert designed for external and internal turning, optimised for medium machining of stainless steels with a TM chipbreaker. PVD-coated AH6225 for stainless steels TM chipbreaker for medium cutting conditions 0.2 mm corner radius for versatile profiles ISO rhombic insert 16 mm with secure hole Stable cutting performance for variable stainless-steel work The insert combines a PVD-coated cemented carbide grade with a geometry tuned for stability in mixed conditions. The AH6225 grade is formulated to provide a sharp yet durable cutting edge, which reduces edge breakdown during interrupted cuts and varying feed rates. Improved edge retention and thermal resistance from the coating translate into fewer insert changes and increased machine uptime, supporting a steady production flow. Defined geometry that controls chip formation and clamping A rhombic form with a nominal size of 16 mm and a 0.2 mm corner radius balances profile definition and edge strength, allowing medium-depth passes while avoiding premature chipping. The 7° clearance angle reduces flank rubbing and helps maintain surface finish, while the 35° approach supports cutting stability. The insert features a cylindrical hole with a single-side countersink (40°–60°) for secure clamp engagement; compatibility with a given holder depends on form, clearance angle, tolerance class, clamp type, size and thickness, as it is part of an ISO indexable insert system. Broad applicability and practical advice for process optimisation Engineered for both external and internal turning, the TM chipbreaker provides controlled chip formation for many stainless-steel machining scenarios; selection of chipbreaker and cutting data should be matched to material, fixture rigidity and machining strategy. For tailored cutting parameters, holder selection or bespoke recommendations for a specific workpiece, Metav Werkzeuge’s technical team can provide application data and holder compatibility guidance to maximise productivity and tool life. Contact Metav Werkzeuge for application guidance, stock information and tailored cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on optimal setup for Tungaloy turning inserts. Technical Data Article number: 6951594 Manufacturer SKU: TUN6951594 SKU: 6951594-Tungaloy Designation: VCMT160402-TM AH6225 Model series: ISO indexable turning inserts Material: Cemented carbide Coating / Grade: AH6225 (PVD-coated) Chipbreaker: TM Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting edge angle: 35° Hole / countersink: cylindrical hole + single-side countersink (40°–60°) Special features Rhombic insert shape ISO standard indexable turning plate With cylindrical hole and single-side countersink Suitable for external and internal turning Universal grade for stainless steels Compatibility determined by form, clearance, tolerance class, clamp, size and thickness FAQ What materials is this insert best suited for? The VCMT160402-TM AH6225 insert is optimised for stainless steels; the AH6225 PVD-coated cemented carbide offers improved wear resistance and edge stability for these materials. Which applications are typical for this insert? Typical applications include both external and internal turning operations where medium cutting conditions and reliable chip control are required; the TM chipbreaker supports controlled chip formation. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a compromise between profile accuracy and edge robustness, reducing the risk of chipping on interrupted cuts while allowing acceptable surface finish. How can compatibility with a toolholder be ensured? Holder compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; Metav Werkzeuge can advise on matching holders and clamping sets for secure installation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6225 and the TSF chipbreaker combined with a 0.2 mm corner radius for consistent performance in turning applications; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for process optimisation. VCMT 160402 AH6225 turning insert (VCMT160402-TSF) — Tungaloy VCMT160402-TSF AH6225 is an ISO-standard turning insert engineered for external and internal turning where a sharp, stable cutting edge is required, particularly in rostfreier Stahl applications. ISO-compliant rhombic geometry PVD-coated carbide AH6225 grade Designed for rostfreier Stahl machining 0.2 mm corner radius for precision Consistent cutting performance under variable conditions The insert is manufactured from carbide with a PVD-coated surface and the AH6225 grade, delivering a balance of sharpness and edge stability for medium machining. This combination reduces flank wear during interrupted cuts and supports repeatable cycle times in production. The TSF chipbreaker is optimised for controlled chip formation when machining rostfreier Stahl, improving process reliability and reducing the need for secondary edge dressing. As a result, machining windows are wider and tool-change frequency is reduced, which benefits throughput in batch production. Seamless integration into ISO tool systems Designed to the ISO dimensions of the VCMT family, the insert fits standard holders by matching form, clearance angle and tolerance class. The rhombic shape and 35° cutting geometry allow flexible use for both external and internal turning operations, while the cylindrical hole with single-side countersink (40°–60°) secures the insert reliably in the clamp. The plate thickness of 4.76 mm and size 16 mm ensure mechanical stability in heavier cuts. These standardised interfaces simplify tooling decisions and allow existing toolholders to be reused without requalifying the machine setup. Improved process security and cost efficiency With a sharp yet robust cutting edge, the insert offers predictable wear behaviour and good surface finish in variable conditions. The TSF chipbreaker supports short, curled chips to prevent entanglement and to maintain coolant access, which leads to fewer interruptions and lower scrap rates. The grade and coating combination aims for extended life in applications with moderate cutting parameters, which translates into lower total tool costs per component and a steadier production flow in small to medium series. Practical selection and handling advice For turning rostfreier Stahl with this insert, select cutting data that favour moderate speeds and stable feed to preserve the edge integrity of the PVD-coated carbide. The 0.2 mm corner radius offers a compromise between finish and edge strength; use a larger radius only if the holder and workpiece rigidity allow it. Where compatibility is uncertain, check holder form, free clearance angle (7°) and fastening method against the ISO designation VCMT160402-TSF before ordering. Proper clamping and correct countersink engagement are essential to prevent movement under load and to achieve repeatable component accuracy. Contact Metav Werkzeuge for original Tungaloy inserts and tailored cutting recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and fast procurement Technical data Article number: 6951555 SKU (manufacturer): TUN6951555 SKU: 6951555-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: VCMT160402-TSF AH6225 Brand: Tungaloy Core specifications Size: 16 mm Plate thickness: 4.76 mm Clearance angle: 7° Cutting angle: 35° Corner radius: 0.2 mm Design & special features Material: carbide Coating: PVD Grade: AH6225 Chipbreaker: TSF Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning FAQ What materials is this insert suitable for? The VCMT160402-TSF AH6225 insert is intended primarily for rostfreier Stahl machining; its PVD-coated carbide and TSF chipbreaker favour medium turning operations. Which holders are compatible with this insert? Compatibility depends on ISO geometry: match holder form, free clearance angle (7°), tolerance class and clamp type to the VCMT160402-TSF designation for correct fit. What does the TSF chipbreaker provide in practice? The TSF chipbreaker on this insert shapes short, manageable chips to improve chip evacuation and maintain coolant access during rostfreier Stahl turning. Can the 0.2 mm corner radius be used for finishing passes? Yes, the 0.2 mm corner radius balances surface finish and edge strength; it is suitable for light finishing if machine and workpiece rigidity are adequate. Is this an original Tungaloy product and how is it identified? This article is listed as VCMT160402-TSF AH6225 with manufacturer article number 6951555 and SKU 6951555-Tungaloy, indicating original Tungaloy production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade engineered specifically for stainless steel and the proven PS chipbreaker, which together deliver stable cutting-edge performance and reliable chip control across medium turning operations; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the specialists for application matching and holder compatibility. VCMT 160402 AH6225 — Tungaloy ISO turning insert for external and internal turning, PVD-coated carbide VCMT 160402 AH6225 is a rhombic ISO turning insert designed for general-purpose external and internal turning, optimised for stainless steel and variable cutting conditions PVD-coated carbide for stainless steel Rhombic 16 mm geometry, 35° approach angle PS chipbreaker for controlled chip formation 0.2 mm corner radius, thickness 4.76 mm High-performance grade for consistent medium turning The PVD-coated carbide composition of this indexable insert provides a sharp yet durable cutting edge that performs reliably when machining stainless steel. The chosen grade AH6225 balances wear resistance and toughness, which reduces the frequency of insert changes and maintains component quality during mixed-batch production. The PS chipbreaker moderates chip formation under changing feeds and depths of cut, lowering the risk of rework and enabling more predictable cycle times. Where corrosion resistance and surface integrity matter, the coating improves thermal stability and abrasion resistance compared with uncoated grades. ISO compatibility and machining security for process planning Being part of an ISO-standard turning insert series, this rhombic insert simplifies tooling procurement and helps maintain a compact inventory of holders and screws. The insert’s compatibility with a holder is defined by form, clearance, tolerance class, fixing method, size and thickness, which supports consistent clamping and repeatable positioning in multi-shift environments. The rhombic 16 mm format and the cylindrical hole with one-sided countersink (40°–60°) facilitate secure seating and straightforward replacement, contributing to reduced setup times and improved process security on turning centres. Geometry and edge preparation for surface finish and tool life A modest 0.2 mm corner radius delivers a compromise between fine surface finish and edge strength, suitable for medium turning where dimensional accuracy and appearance are important. The 7° clearance and the 35° approach geometry help control cutting forces, which improves tool life and vibration behaviour on less rigid set-ups. Plate thickness 4.76 mm ensures stable support under intermittent cuts, while the PS chipbreaker design enhances swarf control, reducing nestling and cleaning time. Original Tungaloy engineering in this insert supports reproducible results and steadier cycle outputs across production batches. For expert advice on integrating Tungaloy VCMT 160402 AH6225 inserts into existing tool systems, or to request application-specific recommendations and genuine spare parts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951518 Manufacturer SKU: TUN6951518 Label: VCMT160402-PS AH6225 SKU: 6951518-Tungaloy Facts Size: 16 mm Corner radius: 0.2 mm Clearance angle: 7° Approach/lead angle: 35° Thickness: 4.76 mm Special features PVD-coated carbide (AH6225) PS chipbreaker Rhombic plate form With hole: cylindrical hole + one-sided countersink (40°–60°) ISO turning insert series Suitable for external and internal turning FAQ What materials is this insert intended for? This insert is specified for machining stainless steel and is supplied in the AH6225 PVD-coated carbide grade for reliable medium turning performance. Which chip control does the geometry provide? The PS chipbreaker on the VCMT160402-PS AH6225 promotes controlled chip formation and safer swarf handling during interrupted or continuous turning. How does the insert’s form affect holder compatibility? Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; the rhombic 16 mm format and the countersunk hole ensure standardised seating with matching ISO holders. Can this insert be used for finishing operations? With a 0.2 mm corner radius and PVD surface hardening, the insert supports good surface quality in medium finishing passes while maintaining edge robustness. Is the product genuine Tungaloy supply? The VCMT160402-PS AH6225 is offered as an original Tungaloy turning insert; for confirmation of origin and batch traceability refer to the manufacturer SKU TUN6951518 in procurement records. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
, Schneideinserts, Industrielles Werkzeug, Verpacktes Set](https://cdn.metav-shop.de/media/46/26/01/1787128164/vcmt160402-ps-ah8015.jpeg?ts=1787128166 "Tungaloy VCMT160402-PS AH8015 Wendeplatte")
VCMT 160402 AH8015 Wendeplatten - Tungaloy
Balanced PVD‑coated carbide grade AH8015 combines wear resistance with edge stability, enabling precise external and internal turning with a 0.2 mm corner radius and a 35° rhombic geometry; order directly via Metav Werkzeuge or contact the consultants for holder-matching and availability. VCMT160402-PS AH8015 ISO turning insert — PVD-coated carbide, 35° rhombic — Tungaloy The VCMT160402-PS AH8015 is an ISO‑standardly shaped turning insert designed for general machining of heat‑resistant alloys and other demanding materials in external and internal turning applications. PVD-coated carbide AH8015 35° rhombic geometry for precise turning 0.2 mm corner radius for fine finishing ISO-compatible form with mounting hole High-performance machining of heat‑resistant alloys The insert uses a PVD‑coated carbide grade AH8015, selected as a first choice for the general machining of heat‑resistant alloys. The coating improves surface hardness and thermal resistance while the substrate maintains chip‑edge stability, which together reduce flank wear and extend effective tool life. This yields fewer tool changes and more consistent cycle times, supporting steady production and improved process economics in series and single‑piece turning operations. Precision geometry for consistent turning results A 35° rhombic geometry combined with a 0.2 mm corner radius and 7° relief provides a stable cutting edge that supports both light finishing passes and medium‑duty turning. The insert thickness of 4.76 mm and the standard 16 mm size fit ISO holders when matching form, relief angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping; correct matching of the holder avoids runout and ensures repeatable part quality. Durability and measurable cost‑effectiveness The PS chipbreaker is optimised for stable chip formation across a broad material spectrum, contributing to a reliable cutting process and consistent surface finish. Using a balanced grade such as AH8015 minimises unexpected edge chipping and supports higher metal removal rates where the machine and fixture rigidity allow. For production environments this translates into longer tool life, fewer interventions at the machine, and a measurable reduction in unit machining costs while maintaining the required component tolerances. Contact Metav Werkzeuge for delivery times and technical matching of the Tungaloy VCMT160402-PS AH8015 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951519 Manufacturer SKU: TUN6951519 SKU: 6951519-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: VCMT160402-PS AH8015 Key dimensions Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Diamond angle: 35° Relief angle: 7° Features & compatibility Material: carbide Coating / grade: PVD-coated AH8015 Chipbreaker: PS Plate shape: rhombic (35°) Mounting: with hole; cylindrical hole + single-side countersink (40°–60°) Intended application: turning (external and internal) ISO‑standard insert — compatibility depends on holder form, relief angle, tolerance and fastening FAQ Which materials are suitable for this insert? This insert (VCMT160402-PS AH8015) is tuned for heat‑resistant alloys and offers a balanced performance across alloyed steels and difficult‑to‑machine materials thanks to the AH8015 PVD coating. How should the insert be paired with a holder? Select a holder matching the ISO form, 7° relief, plate thickness 4.76 mm and fastening type; correct pairing of the VCMT160402-PS AH8015 insert ensures secure clamping and repeatable turning results. What does the AH8015 designation indicate? AH8015 denotes a PVD‑coated carbide grade formulated for a compromise of wear resistance and edge stability, making it suitable as a first choice for general machining of temperature‑resistant alloys with the VCMT geometry. For which operations is the PS chipbreaker recommended? The PS chipbreaker on this insert is intended for stable chip control in medium cutting depths and finish passes, providing predictable chip shape and aiding surface finish consistency during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD‑coated AH8015 grade and the ISO‑standard VCMT160402‑TM geometry for reliable cutting when turning heat‑resistant alloys; the balanced wear resistance and edge stability support consistent cycle times. Order the insert directly via Metav Werkzeuge or consult our technical advisers for holder compatibility and optimal chipbreaker selection. VCMT 160402 AH8015 – ISO turning insert, PVD‑coated carbide by Tungaloy VCMT 160402 AH8015 is an ISO‑standard turning insert designed for general turning of heat‑resistant alloys and assorted steels, compatible with corresponding ISO holders. ISO‑standard VCMT geometry for holder compatibility PVD‑coated AH8015 grade for heat‑resistant alloys Rhombic 16 mm size, 4.76 mm thick, 0.2 mm nose radius Cylindrical hole with 40°–60° countersink Predictable cutting performance for heat‑resistant materials The PVD‑coated AH8015 carbide grade delivers a measured balance between wear resistance and edge stability, making it well suited for the general machining of heat‑resistant alloys. The TM chipbreaker promotes stable chip formation during both external and internal turning, which reduces unexpected interruptions and helps maintain surface quality. With the ISO‑conforming geometry, the insert provides repeatable tool orientation and predictable cutting forces, supporting process planning and cycle‑time optimisation. Clear guidance for holder matching and setup Compatibility with a clamping system depends on the insert form, 7° clearance, tolerance class, fastening method, size and thickness. The rhombic shape with a nominal 35° cutting angle and 0.2 mm nose radius supports a range of turning tasks from light profiling to finishing. The cylindrical hole with one‑sided countersink (40°–60°) ensures secure seating in compatible holders; selection of the correct holder, underlay or clamp set and replacement screws will determine assembly stability. For stable results, choose the chipbreaker and grade to match workpiece material and machining conditions. Long‑term economy through surface technology and system design The PVD finish enhances resistance to abrasive and adhesive wear and helps preserve the cutting edge under elevated temperatures, extending service intervals and reducing tooling consumption. The insert’s 4.76 mm thickness and rhombic 16 mm format offer a robust contact area, while the balanced microgeometry supports consistent part tolerances. Together, these characteristics contribute to higher productivity and lower unit cost per component in series production. Integration into an ISO tool system simplifies inventory management and reduces setup complexity. For machining heat‑resistant alloys, specify the PVD‑coated AH8015 VCMT insert from Tungaloy and contact Metav Werkzeuge for compatibility checks, procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6951595 SKU: 6951595-Tungaloy Manufacturer SKU: TUN6951595 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: VCMT160402-TM Facts Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 7° Cutting angle: 35° Countersink angle: 40°–60° Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: TM Shape: rhombic Mounting: cylindrical hole with one‑sided countersink Application: turning (external and internal) System: ISO turning insert compatible with corresponding holders FAQ What materials is this insert intended for? The VCMT160402‑TM AH8015 insert from Tungaloy is specified for the general machining of heat‑resistant alloys and provides balanced performance on a wide range of steels and alloys. How does the AH8015 grade affect tool life? The AH8015 grade with PVD coating offers improved wear resistance and edge stability, which contributes to extended tool life and more consistent surface finish during turning operations. Which chipbreaker is fitted and what is its benefit? The insert features a TM chipbreaker, designed to promote stable chip formation and evacuation in a variety of turning conditions, reducing the risk of chip congestion. What holder characteristics must be checked for compatibility? Compatibility is determined by insert form, clearance angle (7°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm); ensure the holder matches these parameters for secure clamping. Is the insert supplied with mounting hardware? The insert is supplied as an ISO‑standard turning insert; holders, underlays/clamp sets and replacement screws are part of the system and should be selected separately to match the insert geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for heat-resistant alloys, a TSF chipbreaker for reliable chip control and an ISO-compliant geometry that ensures broad holder compatibility; order the insert via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. VCMT 160402 AH8015 — VCMT160402-TSF ISO turning insert for turning (Tungaloy) VCMT160402-TSF AH8015 is an ISO rhombic indexable turning insert designed for general machining of heat-resistant alloys and similar challenging materials PVD-coated carbide for heat-resistant alloys TSF chipbreaker for consistent chip control ISO rhombic form 16 mm, 0.2 mm corner radius High-performance turning of heat-resistant alloys The PVD-coated carbide grade AH8015 delivers a balanced combination of wear resistance and edge stability, making it a first choice for the general machining of high-temperature alloys. The insert’s composition and coating reduce flank wear and thermal degradation during sustained cutting, which translates into longer tool life and fewer interruptions in production. This technical advantage supports a predictable process window, allowing higher effective cutting speeds without compromising surface quality. Geometry and clamping ensure reliable results The rhombic shape with a 35° lead angle and 0.2 mm corner radius provides a versatile profile for both external and internal turning operations. The insert’s 7° relief angle and 4.76 mm thickness contribute to mechanical stability under moderate to heavy cuts; compatibility with standard ISO holders is determined by form, relief angle, tolerance class, fastening and plate dimensions. The central cylindrical hole with a one-sided countersink (40°–60°) secures positive clamping and repeatable positioning in common toolholders. TSF chip control and process stability The integrated TSF chipbreaker is tailored for the material range and the AH8015 grade, promoting predictable chip formation and evacuation. Effective chip control reduces the risk of workpiece damage and tool interference, improving cycle times and operator safety. In practice, the controlled chip shape lowers secondary operations such as manual chip clearing and reduces downtime caused by chip-related issues, contributing directly to higher productivity. Application guidance and material suitability This insert is optimised for turning applications and performs well on heat-resistant alloys where balanced toughness and wear resistance are required. The PVD-coated surface enhances adhesion resistance at elevated temperatures while the substrate provides the necessary edge support. When selecting cutting parameters, prioritise stable clamping and appropriate feed rates for the chosen corner radius to preserve edge life and achieve consistent surface finishes. For tailored specification advice, delivery enquiries or application support for the Tungaloy VCMT160402-TSF AH8015, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical guidance and supply information. Technical data Article number: 6951556 Manufacturer SKU: TUN6951556 Model series: ISO turning inserts Brand: Tungaloy Facts ISO designation: 160402 Corner radius: 0.2 mm Lead/angle: 35° Relief angle: 7° Plate thickness: 4.76 mm Plate size: 16 mm Hole: cylindrical hole + one-sided countersink (40°–60°) Special features PVD-coated cemented carbide TSF chipbreaker Rhombic plate form Suitable for turning (external and internal) Optimised for heat-resistant alloys FAQ What is the primary application for this insert? The VCMT160402-TSF AH8015 insert is intended for turning operations, especially for the general machining of heat-resistant alloys and similar demanding materials. Which material does the AH8015 grade suit best? AH8015 is a PVD-coated carbide grade optimised for elevated-temperature alloys, offering a balance between wear resistance and edge stability. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes consistent chip formation and evacuation, improving process stability and reducing the likelihood of chip jams. Is the insert compatible with standard ISO holders? Compatibility depends on holder shape, relief angle, tolerance class, fastening and plate dimensions; the insert follows ISO geometry for broad holder compatibility. What clamping features does the insert have? The insert has a central cylindrical hole with a one-sided countersink (40°–60°) for secure and repeatable clamping in matching toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 DX120 Wendeplatten - Tungaloy
Benefit from the combination of PCD grade DX120 for ultra-fast aluminium machining, extended tool life and ISO interchangeability; order the VCMT160402-DIA DX120 directly via Metav Werkzeuge or contact the consultants for tailored guidance. VCMT 160402 DX120 – Turning insert (PCD), Tungaloy A VCMT160402-DIA DX120 ISO-standard turning insert engineered for high-speed external and internal turning of aluminium and other non-ferrous or abrasive non-metal materials. Polycrystalline diamond (PCD) grade DX120 Designed for high cutting speeds Rhombic 16 mm insert with 7° relief Faster production and lower tool costs through PCD performance The use of polycrystalline diamond (PCD) in grade DX120 provides a very high cutting-speed capability while maintaining a consistently low wear rate, which directly reduces the number of tool changes per shift. For operations focused on aluminium and similar materials, this translates into a measurable reduction in cycle times and a lower cost per finished part thanks to the extended tool life of the diamond cutting edge. The combination of a diamond cutting layer on a robust carbide substrate ensures both sharpness and support under machining loads. Stable geometry for repeatable, precision turning Designed as a rhombic insert with a nominal size of 16 mm and a corner radius of 0.2 mm, the geometry provides reliable chip formation and consistent dimensional results on shafts and bores. The insert features a 7° relief angle and a centre hole with a cylindrical seat plus a single-sided countersink (40°–60°), guaranteeing secure clamping and accurate seating in ISO-compatible holders. This geometry supports stable cutting conditions, improving surface finish and reducing vibration in medium to high feed ranges. Application fit and material guidance for process optimisation The DX120 cutting grade is formulated for aluminium, non-ferrous metals and abrasive non-metallic materials; it is therefore ideal for demanding, high-speed turning tasks where long service intervals are critical. Use of the appropriate chipbreaker and selection of holder stability relative to the component geometry are essential: the insert is suited to both external and internal turning operations when paired with the correct toolholder. The ISO-standard design simplifies integration into existing tool systems and eases inventory management through predictable interchangeability. Practical benefits for production planning and quality control With its hard-wearing diamond cutting face, this series reduces downtime associated with frequent insert replacement and requalification. The ISO-Drehwendeschneidplatten system setup—insert, suitable outer holder or boring bar, seating pad/clamping kit and replacement screws—supports rapid changeovers and reproducible clamping torque. Traceable repeatability and long-edge life assist quality assurance by reducing process variation and the need for frequent rework. For reliable high-speed aluminium turning with long tool life, specify the Tungaloy VCMT 160402 DX120 and contact Metav Werkzeuge for purchase options or application advice. Technical data Article number: 6822171 SKU: 6822171-Tungaloy Manufacturer SKU: TUN6822171 Label: VCMT160402-DIA DX120 Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 7° ISO code: 160402 Angle: 35° Special features / Versions Material: carbide substrate Coating/grade: DX120 (PCD) Chipbreaker: DIA Plate form: rhombic Centre hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning Compatibility: ISO-standard insert for holders determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The VCMT160402-DIA DX120 is optimised for aluminium, other non-ferrous metals and abrasive non-metallic materials; the PCD grade DX120 provides long life under high cutting-speed conditions. Can this insert be used for internal turning operations? Yes, the ISO-standard geometry and the cylindrical centre hole with single-sided countersink allow secure mounting for both external and internal turning when paired with an appropriate boring bar or holder. How does the DX120 grade affect machining parameters? DX120’s polycrystalline diamond face enables significantly higher cutting speeds and extended tool life compared with conventional carbide grades, allowing process engineers to reduce cycle times while maintaining surface quality. What determines compatibility with toolholders? Compatibility depends on insert form, relief angle, tolerance class, fastening method, overall size and thickness; the ISO designation simplifies matching with standard holders designed for VCMT-style inserts. Is the insert supplied with clamping screws or an underlay? The VCMT160402-DIA DX120 is part of an ISO insert system where the complete setup comprises the insert, a suitable outer holder or boring bar, seating pad/clamping kit and replacement screws; check the toolholder specification for exact supply scope. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of consistent finishing quality, low cutting forces and ISO compatibility for reliable production results; order directly via Metav Werkzeuge or consult our specialists for holder recommendations. VCMT160402-TM NS9530 – ISO rhombic turning insert for finishing, Tungaloy The VCMT160402-TM NS9530 is an ISO‑standard rhombic turning insert designed for finishing operations on steel, supplying a sharp uncoated cermet grade with a low cutting‑force geometry for continuous cuts. ISO rhombic insert, 16 mm size Sharp uncoated cermet grade NS9530 Cylindrical hole with single-sided countersink Low cutting forces for excellent surface finish Precision finishing with a dedicated cermet grade The NS9530 finishing grade is an uncoated cermet optimised for steel, offering a very sharp cutting edge and reduced cutting forces that translate into improved stability and repeatable surface quality. For continuous turning and small depths of cut this composition reduces vibration and burr formation, which means fewer secondary operations and more parts meeting tolerance the first time. The combination of a true finishing geometry and the TM chipbreaker delivers controlled chip flow and consistent edge life even under stable machining conditions. Accurate fit and clamping for consistent performance Compatibility with the clamping system is determined by the insert form, relief angle, tolerance class, mounting method, size and thickness. This rhombic shape in 16 mm size with a thickness of 4.76 mm and a 7° relief is intended for holders that match ISO dimensions. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) and a 0.2 mm corner radius, helping to centre and secure the cutting edge precisely in the seat. Correct pairing of insert and holder reduces runout and ensures the mechanical conditions required for fine finishing are met, thereby stabilising process parameters and minimising rejects. Productivity gains and practical application advice As a finishing grade, this insert is aimed at operations where surface integrity and dimensional accuracy are priorities. The low cutting forces reduce tool‑induced deflection, enabling tighter tolerances and higher effective feed stability. In practice, selecting the TM chipbreaker and the NS9530 grade for steel turning results in efficient chip control during continuous cuts, while the sharp cermet edge supports superior surface roughness values. For workshops evaluating holder choices or cutting data, Metav Werkzeuge’s technical team can advise on the ideal nominal speeds and feeds to balance tool life and cycle time. For precision finishing with Tungaloy cermet inserts, contact Metav Werkzeuge for tailored advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951597 Manufacturer SKU: TUN6951597 Label: VCMT160402-TM NS9530 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Dimensions & angles Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 7° Lead angle: 35° ISO designation: 160402 Features & applications Grade: NS9530 (uncoated cermet) Chipbreaker: TM Hole: cylindrical hole with single-sided countersink (40°–60°) Shape: rhombic Typical use: finishing turning of steel Compatibility: for holders matching ISO form, tolerance and clamp design FAQ What materials is this insert best suited for? The insert grade NS9530 is formulated for finishing turning of steel; the uncoated cermet composition provides a sharp edge and low cutting forces for superior surface finish. How does the TM chipbreaker affect machining? The TM chipbreaker on this rhombic insert controls chip form during continuous cuts, improving evacuation and reducing the risk of chip interference in finishing operations. Which holder features are essential for correct mounting? Holders must match the ISO form, relief angle, tolerance class, mounting and insert thickness to ensure correct clamping and repeatable seating of the insert. What does the 0.2 mm corner radius mean for surface quality? A 0.2 mm corner radius reduces cutting stress and helps achieve finer surface roughness while still providing a small, defined edge suitable for finishing passes. Is this an uncoated or coated insert, and what does that imply? This is an uncoated cermet grade; the lack of coating results in a very sharp edge tailored to finishing and low cutting forces rather than the wear resistance typically provided by coated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the provided specifications describe the same item alternatively as a cemented carbide tool and as an uncoated cermet grade (NS9530). These two material classes have different cutting behaviour, recommended cutting parameters and intended applications; cemented carbide and cermet are not interchangeable descriptions. Because of this contradiction, a reliable, production-ready product description cannot be generated without clarification. Please confirm whether the insert is a cemented carbide or an uncoated cermet (NS9530) and verify any related material-dependent fields (for example grade/coating and material family). Once the material specification is confirmed, a full technical and marketing text can be produced that accurately reflects geometry, chipbreaker, ISO designation and application recommendations. If further data verification is needed, please supply the corrected information or contact Metav Werkzeuge for assistance.
VCMT 160402 T6215 Wendeplatten - Tungaloy
Take advantage of a hard-wearing CVD-coated carbide grade T6215, a precise 0.2 mm corner radius and ISO-compatible geometry to secure consistent productivity when turning rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. VCMT160402-TM T6215 — ISO turning insert VCMT 160402 T6215 for turning, Tungaloy The VCMT160402-TM T6215 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for machining rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 for rostfreier Stahl Rhombic VCMT geometry with 35° cutting angle 0.2 mm corner radius for improved surface finish Consistent wear resistance and predictable tool life The CVD-coated carbide in grade T6215 offers high wear resistance that extends tool life, particularly when machining rostfreier Stahl. The coating reduces flank wear and improves thermal stability, which means longer uninterrupted production runs and fewer insert changes. As an ISO turning insert, compatibility with standard holders is achieved through matching form, relief angle and thickness, allowing seamless integration into established tool systems and predictable process windows. Controlled chip formation and improved surface quality The TM chipbreaker combined with the 0.2 mm corner radius is engineered for stable chip control and fine finishing in turning operations. The rhombic geometry with a 35° cutting edge promotes a balance between cutting forces and surface integrity, reducing vibration and minimising the need for subsequent finishing. Where dimensional tolerance and surface appearance are critical, this insert delivers a reliable combination of consistent cutting and controlled chip flow, reducing rework and increasing downstream throughput. Straightforward mounting and robust clamping for secure production The insert’s rhombic form (VCMT) and a 4.76 mm plate thickness provide mechanical rigidity in the holder, while the cylindrical hole with a one-sided countersink (40°–60°) ensures reproducible clamping and quick indexability. The ISO-standard specification supports interchangeability across compatible holders and toolposts, simplifying inventory and tool management. With this design and the carbide substrate, the insert supports steady machining even in semi-stable interrupted cuts, helping to maintain cycle times and part quality. For turning applications in rostfreier Stahl where consistency and tool life matter, contact Metav Werkzeuge for tailored advice on Tungaloy inserts — eMail: info@metav-werkzeuge.com • Telefon: +49 2822 7131930 — Metav Werkzeuge can recommend the optimal holder and cutting parameters for the VCMT160402-TM T6215. Technical Data Article number: 6951592 Manufacturer SKU: TUN6951592 Designation: VCMT160402-TM T6215 Model series: ISO turning indexable inserts Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 7° Cutting edge angle: 35° ISO code: 160402 Special features CVD-coated carbide, grade T6215 Rhombic VCMT plate form TM chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended for turning (external and internal) Suitable for machining rostfreier Stahl under stable to slightly interrupted conditions FAQ Which materials is this insert suitable for? The VCMT160402-TM T6215 is formulated for machining rostfreier Stahl; the CVD coating and carbide substrate help maintain cutting edge stability under the heat and strain typical of these alloys. Can the insert be used for both external and internal turning? Yes, the ISO rhombic format and the specified geometry make the insert appropriate for both external and internal turning operations when paired with a compatible holder. What does the TM chipbreaker achieve in practice? The TM chipbreaker is designed to produce predictable chip shapes and support stable cutting, improving surface finish and reducing the likelihood of chip-related interruptions during machining. How is the insert secured in the holder? The insert has a cylindrical hole with a one-sided countersink (40°–60°) that facilitates secure clamping and reproducible seating in ISO-compatible holders and toolblocks. How can I reference this item when ordering or requesting info? Use the manufacturer article number 6951592 or the manufacturer SKU TUN6951592 together with the designation VCMT160402-TM T6215 to ensure accurate identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance and sustained productivity in medium steel turning; the rhombic 35° geometry with a 0.2 mm corner radius delivers precise profile control and stable clamping. Order the insert directly via Metav Werkzeuge or consult the team for application advice. VCMT 160402 T9215 turning insert (rhombic, 35°) by Tungaloy The VCMT 160402 T9215 is an ISO-standard turning insert designed for efficient external and internal turning in medium steel, combining a CVD-coated carbide grade with a PS chipbreaker for reliable metal removal. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic insert with 35° lead angle Corner radius 0.2 mm for fine profiles Cylindrical hole with 40°–60° countersink Consistent productivity through optimised grade and coating The CVD-coated carbide T9215 offers a balance of wear resistance and fracture toughness, making it particularly suited to sustained metal removal in medium steel. The coating reduces flank wear under continuous or slightly interrupted cuts, which supports longer tool life and fewer index changes. Choosing a grade that resists abrasive wear while maintaining edge strength results in steady cycle times and predictable tool performance, important for production environments where process reliability matters. Precise geometry and secure mounting for repeatable results Compatibility with holders depends on geometry, clearance and clamping; the insert’s rhombic shape, 35° lead angle and 7° clearance angle ensure stable engagement and favourable cutting forces. The 0.2 mm corner radius provides a defined cutting edge for fine-profile finishes while limiting cutting forces in lighter passes. The cylindrical hole with one-sided countersink (40°–60°) guarantees secure clamping and repeatable seating in ISO-compatible toolholders. With a plate thickness of 4.76 mm and a nominal size 16, the insert fits standard ISO turning systems and supports consistent positioning across tool changes. Application guidance for machining and toolset integration The PS chipbreaker is tailored to chip control in medium steel and performs best with continuous to slightly interrupted cuts; select a matching external holder or boring bar and include an appropriate shim and clamping set for maximum stability. For roughing, favour slightly higher feeds with robust clamping; for finishing, reduce feed to exploit the 0.2 mm radius for surface quality. The insert integrates into a system comprising an ISO turning insert, the matching external holder or boring bar, a shim/clamping set and spare screws to ensure uninterrupted production. The result is a pragmatic combination of productivity and operational reliability with low setup complexity. For high-productivity medium steel turning with Tungaloy’s CVD-coated T9215 grade, contact Metav Werkzeuge for availability and tailored tooling advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6951514 Manufacturer SKU: TUN6951514 SKU: 6951514-Tungaloy Designation: VCMT160402-PS T9215 Facts ISO code: 160402 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 7° Lead angle: 35° Special features Material: carbide (CVD-coated), grade T9215 Chipbreaker: PS Insert shape: rhombic Hole: cylindrical with one-sided countersink (40°–60°) Intended application: turning (external and internal) Suitable for continuous to slightly interrupted cuts FAQ Which materials is this insert intended for? The VCMT160402-PS T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade provides wear resistance and toughness suited to that material class. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO geometry (160402) and is compatible with holders that match the shape, clearance angle, tolerance class, clamping method, size and thickness. What advantages does the PS chipbreaker provide? The PS chipbreaker improves chip control in medium steel, promoting consistent chip formation and evacuation under continuous to slightly interrupted cutting conditions. How does the 0.2 mm corner radius affect finishing? A 0.2 mm radius balances edge strength with surface finish capability; it supports finer profiles and improved surface integrity when feed is reduced for finishing passes. What components are needed for a complete tool system? A complete setup requires an ISO-compatible external holder or boring bar, the matching shim/clamping set and spare screws to ensure secure mounting and repeatable positioning of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable fracture toughness and full ISO compatibility for steady production. Order the insert directly via Metav Werkzeuge or consult the application specialists for process-matched selection. VCMT 160402 T9215 ISO turning insert — CVD-coated carbide, 0.2 mm radius (Tungaloy) A VCMT160402-TSF T9215 is an ISO-standard rhombic turning insert designed for mid-range steel machining, offering a robust CVD-coated carbide grade and an optimised TSF chipbreaker for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Optimised TSF chipbreaker 0.2 mm corner radius for finishing ISO rhombic insert, 4.76 mm thick Increase output with durable CVD-coated carbide The CVD-coated carbide composition of this insert combines wear resistance with sufficient toughness to sustain productive machining cycles. Grade T9215 is specified for medium steel applications and balances life expectancy with fracture protection; this results in fewer tool changes and more predictable process windows. By using a grade suited to steady cutting conditions, tool life variability is reduced and cycle times become more consistent, which supports improved shop-floor efficiency. Reliable fit and repeatable clamping in ISO systems Thanks to the ISO format and defined geometry, the insert guarantees repeatable seating and clamping when matched to a suitable external holder. The rhombic form, 7° clearance and standard ISO designation ensure that form, clearance, tolerance class, fixing and thickness match common holders. This predictability simplifies tool inventory and reduces setup time, since dimensional conformity governs secure fastening, correct rake relationships and consistent cutting performance across batches. Controlled chips and improved surface integrity The integrated TSF chipbreaker and the 0.2 mm corner radius support stable chip formation and improved surface finish for finishing and medium-depth cuts. The insert’s geometry, including a 35° approach angle, promotes even load distribution and helps to avoid edge chipping in continuous or lightly interrupted operations. When combined with a correctly chosen holder and clamping set, the result is consistent part quality and lower rework rates in turning operations. For high-productivity mid-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application advice and fast delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer article number: 6951550 SKU: 6951550-Tungaloy Manufacturer SKU: TUN6951550 Label: VCMT160402-TSF T9215 Model series: ISO-Drehwendeschneidplatten Core technical data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 35° ISO designation: 160402 Hole: with hole Countersink: cylindrical hole + one-sided countersink (40°–60°) Features and applications Material: carbide Coating: CVD (grade T9215) Chipbreaker: TSF Shape: rhombic Application: Turning Typical use: medium steel machining, continuous to light interruptions System: insert + matching external holder, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The VCMT160402-TSF T9215 insert is optimised for medium-strength steel machining; the CVD-coated T9215 grade delivers wear resistance and fracture protection in these materials. Is this insert compatible with standard ISO holders? Yes. The insert follows the ISO designation 160402 and is compatible with holders that match form, clearance, tolerance, fixing method, size and thickness. Which chipbreaker is integrated and what does it achieve? The integrated TSF chipbreaker is designed for controlled chip formation and reliable evacuation during continuous and lightly interrupted turning, supporting improved surface finish. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius reduces micro-chipping risk while promoting a smoother surface finish in finishing and semi-finishing passes. What is included when ordering this item? The article is supplied as an ISO turning insert; a matching external holder, underlay/clamping set and screws are required and are selected separately to complete the tooling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide grade T9215, a 0.2 mm corner radius and ISO compatibility to achieve reliable, high‑productivity turning with consistent tool life; order directly via Metav Werkzeuge or consult the specialists for application-specific advice. VCMT 160402 T9215 — ISO turning insert, CVD‑coated carbide, 0.2 mm radius (Tungaloy) VCMT160402-TM T9215 is an ISO‑standard rhombic turning insert engineered for medium‑steel external and internal turning with a TM chipbreaker for productive machining CVD‑coated carbide grade T9215 0.2 mm corner radius for fine finishes Rhombic 16 mm plate, 35° cutting angle TM chipbreaker for medium steel productivity Consistent productivity through wear‑resistant grade and coating The combination of a CVD‑coated surface and the T9215 carbide grade provides a clear performance advantage where repeatability and tool life matter. The coating creates a hard, wear‑resistant barrier while the substrate maintains fracture resistance, which translates into steadier cutting forces and fewer tool changes during continuous to lightly interrupted cuts. This stability supports higher feed rates and longer uninterrupted production runs, improving throughput without compromising component quality. Precision geometry for predictable results and simple integration Designed to the ISO 160402 designation, the insert’s rhombic form, 35° cutting angle and 7° clearance angle ensure predictable engagement in standard ISO holders. The 0.2 mm corner radius helps to achieve improved surface finish on turned components while limiting cutting edge vulnerability in moderate depths of cut. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping in compatible adapters. Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness, so integration into existing tool systems is straightforward when matched correctly. System‑level reliability and application guidance The recommended system consists of the ISO insert together with a matching external holder or boring bar, an underlay/clamping kit and replacement screws, ensuring correct seat and repeatability. The TM chipbreaker is optimised for medium‑steel cutting, promoting controlled chip formation and evacuation under stable cutting conditions. For changeable production environments or mixed workpiece geometries, selecting the appropriate chipbreaker and grade combination will reduce unplanned stops and simplify tool management. For further guidance on choosing holder geometry or cutting parameters, Metav Werkzeuge’s technical advisers can provide precise recommendations based on the specific application. For high‑productivity turning with Tungaloy T9215 inserts, contact Metav Werkzeuge for application advice and fast supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6951590 Manufacturer SKU: TUN6951590 SKU: 6951590-Tungaloy Name: VCMT160402-TM T9215 Brand: Tungaloy Category: Turning inserts Core data ISO code: 160402 Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 35° Clearance angle: 7° Special features Material: carbide Coating: CVD‑coated Grade: T9215 Chipbreaker: TM Plate form: rhombic Hole: cylindrical hole + single‑side countersink (40°–60°) Typical application: external and internal turning System: ISO insert with matching holder, underlay/clamping set and replacement screws FAQ What materials is this insert best suited for? The T9215‑grade insert is aimed at medium‑steel machining; the VCMT160402‑TM T9215 handles continuous to lightly interrupted cuts with good wear resistance and fracture toughness. Which toolholders are compatible with this insert? Compatibility requires holders that match the insert form, clearance angle, tolerance class, clamping method, size and thickness; the ISO‑160402 designation facilitates selection of appropriate external holders or boring bars. What does the T9215 designation mean for performance? T9215 indicates a CVD‑coated carbide grade that balances high wear resistance with sufficient toughness for productive machining of medium steels, reducing flank wear and maintaining edge stability. How does the TM chipbreaker affect machining? The TM chipbreaker promotes controlled chip formation and evacuation during turning of medium‑grade steels, aiding surface finish and reducing risk of chip entanglement in stable cutting conditions. How can the part be identified for reordering? Use the article number 6951590, the SKU 6951590‑Tungaloy or the manufacturer SKU TUN6951590 to re‑order the specified insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, consistent chip control and ISO compatibility for efficient turning operations; order the inserts directly via Metav Werkzeuge or request expert advice from our consultants. VCMT 160402 T9225 indexable turning insert — CVD-coated carbide, TSF chipbreaker (Tungaloy) The VCMT160402-TSF T9225 is an ISO-form indexable turning insert designed for medium to heavy steel turning, offering a balance of toughness and wear resistance for varied engagement conditions. CVD-coated carbide T9225 for toughness and wear resistance TSF chipbreaker for controlled chips and interrupted cuts ISO 160402 rhombic geometry, 7° relief, 0.2 mm radius Cylindrical hole with single-sided countersink (40°–60°) Consistent performance and economical productivity for steel turning The CVD-coated carbide grade T9225 delivers a combination of wear resistance and toughness that is optimised for medium to heavy steel machining. By using a robust cutting grade, the insert sustains slightly interrupted cuts and variable engagement without rapid edge failure, which reduces downtime and tool changes. The result is improved cycle stability and predictable tool life, supporting continuous production runs and a measurable increase in throughput. Compatibility with standard holders is governed by form, relief angle, tolerance class, fastening method, size and thickness, ensuring straightforward integration into existing tool systems. Precise geometry that enhances clamping stability and repeatability The insert’s ISO 160402 rhombic form, 7° relief and 0.2 mm corner radius are engineered for reliable seating and repeatable positioning in clamped holders and boring bars. A plate thickness of 4.76 mm and the specified hole and countersink design permit consistent clamp engagement, reducing micro-movement under load and improving surface finish on the workpiece. These geometric details translate directly into fewer set-up adjustments, more consistent dimensional accuracy and lower scrap rates—benefits that are particularly valuable in batch production or when tight tolerances are required. Controlled chip formation for safer, cleaner machining The TSF chipbreaker is tailored for secure chip control across a range of cutting parameters, producing manageable chip forms even in less stable cutting conditions. That control reduces the risk of entanglement and tool damage, shortens auxiliary cleaning tasks and contributes to a safer shop-floor environment. Use in both external and internal turning applications is supported, provided the correct holder and stable set-up are selected. Choosing matching chipbreaker and grade according to workpiece material and process stability ensures optimal performance and extends cutting edge life. System advice and practical selection guidance This insert is intended to be used as part of an ISO insert system comprising the indexable plate, a compatible external holder or boring bar, an underlay/clamping kit and replacement screws. Select the TSF chipbreaker and T9225 grade when operations demand a balance of wear resistance and toughness; for very light finishing or non-ferrous materials, alternative grades and geometries may be more appropriate. The article is supplied with the standard rhombic geometry and a cylindrical locating hole with a one-sided countersink (40°–60°), which facilitates mounting in widely used clamping systems. For technical clarifications or assistance in choosing the correct holder and set-up parameters, consult the product documentation or our technical team. Contact Metav Werkzeuge for tailored application advice and reliable supply of Tungaloy VCMT160402-TSF T9225 inserts; technical consultants are available to recommend the best grade and chipbreaker for the application. Technical data Article number: 6951552 Manufacturer SKU: TUN6951552 SKU: 6951552-Tungaloy Series: ISO indexable turning inserts Type designation: VCMT160402-TSF T9225 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 7° Angle: 35° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Materials & special features Material: carbide Coating: CVD (as specified by grade) Grade: T9225 (universal, medium–heavy steel) Chipbreaker: TSF Plate form: rhombic Application: turning System components: ISO insert, compatible external holder or boring bar, underlay/clamping set, replacement screws Notes on compatibility: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert optimised for? The VCMT160402-TSF T9225 is optimised for medium to heavy steel machining, offering a balance of toughness and wear resistance suited to variable engagement conditions. Can the insert be used for interrupted cuts? Yes, the T9225 grade combined with the TSF chipbreaker is designed to handle slightly interrupted cuts and fluctuating cut conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; use a matching ISO external holder or boring bar designed for 160402 inserts. What are the key dimensions to check when fitting the insert? Key dimensions include the 16 mm nominal size, 4.76 mm plate thickness, 0.2 mm corner radius and the 7° relief angle to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 T9225 Wendeplatten - Tungaloy
The high-performance VCMT160402-PS T9225 combines a CVD-coated carbide grade with a robust PS chipbreaker, delivering dependable performance in medium to heavy steel turning and interrupted cuts. Benefit from consistent edge stability, precise profile control and ISO compatibility — order the insert directly via Metav Werkzeuge or consult our specialists for application support. VCMT160402-PS T9225 ISO turning indexable insert by Tungaloy — CVD-coated carbide for medium to heavy steel turning VCMT160402-PS T9225 is an ISO rhombic indexable insert designed for external and internal turning where toughness and reliable chip control are required CVD-coated carbide grade T9225 For medium to heavy steel turning 0.2 mm corner radius for profile work Rhombic 35° insert with 7° relief High-performance cutting for variable and interrupted cuts The CVD-coated carbide composition of this insert provides a balanced combination of wear resistance and toughness that is particularly effective under changing engagement conditions. The T9225 grade is engineered for medium to heavy steel machining, which means fewer insert changes and more predictable cycle times. The PS chipbreaker is optimised for secure chip control during typical turning operations, reducing the risk of built-up edge and improving process stability. Compatibility with ISO-standard holders ensures easy integration into existing tool setups, so the workflow remains efficient and repeatable. Predictable tool life and improved surface quality A robust cutting edge and the grain structure of the coated carbide contribute to a steady tool life even when cuts are intermittently interrupted. The PS chipbreaker supports consistent chip segmentation, which minimises rework and protects the component surface. As a result, surface finish is enhanced without sacrificing productivity, and downtime for tool changes is reduced. These attributes translate into a favourable cost-per-part ratio for batch and continuous production, while offering the resilience needed for tougher feeding conditions. Practical geometry and secure mounting for everyday shop use The rhombic insert with a 35° included angle and a 0.2 mm corner radius enables fine profile definition and reliable edge strength for common turning tasks. The insert thickness of 4.76 mm and the ISO 160402 dimensions make it compatible with a wide range of external holders and boring bars; the retention is defined by form, relief angle, tolerance class, fastening method, size and thickness. A cylindrical mounting hole with a single-sided countersink (40°–60°) ensures secure seating and straightforward replacement. This combination of geometry and ISO conformity simplifies tool selection and reduces setup complexity. For tailored machining recommendations or to secure the Tungaloy VCMT160402-PS T9225 for demanding turning operations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert advice and fast supply. Technical data Article number: 6951515 SKU: 6951515-Tungaloy Manufacturer SKU: TUN6951515 Designation: VCMT160402-PS T9225 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Core dimensions Insert shape: rhombic Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 35° Special features Grade/coating: CVD-coated carbide T9225 Chipbreaker: PS Hole style: with hole — cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Typical use: medium to heavy steel machining ISO designation: 160402 FAQ What materials is this insert best suited for? The Tungaloy VCMT160402-PS T9225 is formulated for medium to heavy steel machining and performs well under slightly interrupted cuts where toughness is required. What does the PS chipbreaker provide in practice? The PS chipbreaker offers controlled chip formation and enhanced evacuation, which leads to improved surface quality and fewer tool interruptions during turning. Is the insert compatible with standard holders? Yes. The insert follows the ISO 160402 form and mounting dimensions; compatibility is determined by shape, relief angle, tolerance class, fastening and thickness. How does the 0.2 mm corner radius affect the cut? A 0.2 mm corner radius balances profile accuracy with edge strength, making it suitable for finishing passes and geometry-critical turning work. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160402 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide substrate, the tough T9225 grade and ISO VCMT geometry for reliable medium-to-heavy steel turning; consistent chip control and long tool life support uninterrupted production. Order directly via Metav Werkzeuge or consult our technical advisors for application guidance. VCMT160402-TM T9225 — ISO turning insert for medium-to-heavy steel, Tungaloy The VCMT160402-TM T9225 is an ISO turning insert engineered for medium-to-heavy steel turning, offering a robust CVD-coated carbide body with a TM chipbreaker for stable metal removal in varying engagement conditions CVD-coated carbide for high durability Robust T9225 grade for medium–heavy steel ISO rhombic insert VCMT 160402 0.2 mm corner radius with 7° clearance Stable chip control and dependable cutting performance The combination of a CVD-coated surface and the TM chipbreaker provides predictable chip formation under fluctuating cut conditions, which improves machining uptime and reduces secondary operations. This geometry supports efficient evacuation of swarf and lowers the risk of built-up edge formation, resulting in a more consistent surface finish and fewer interruptions. The result is measurable process stability: longer tool life and reduced need for frequent insert changes contribute directly to lower overall operating costs while maintaining part quality. Simple integration with ISO toolholders for flexible setups The insert follows the ISO VCMT geometry, which makes holder compatibility straightforward when the correct seat form, clearance angle and tolerance class are observed. Key design elements such as the rhombic shape, cylindrical hole with a one-sided countersink (40°–60°) and the standard 16 mm plate size ensure secure clamping and repeatable positioning in matched holders. The 7° clearance and the specified approach angle improve cutting contact and reduce chatter, while the 4.76 mm plate thickness adds stability for heavier cut depths. These attributes simplify tool inventory and speed up changeovers on the shop floor. Versatility in steel turning and economical advantages The T9225 grade is a robust universal choice that balances wear resistance and toughness for medium-to-heavy steel machining, including lightly interrupted cuts. With a 0.2 mm corner radius, this insert is suited to general turning tasks where a compromise between strength and detail is required. Selecting this grade and geometry supports consistent cycle times and repeatable results across batches, helping to enhance production reliability. For customers seeking tailored advice on feed, speed or holder selection, Metav Werkzeuge’s application team can recommend the most suitable chipbreaker and operating parameters to match specific machining stability and finish requirements. For purchasing or detailed application support for Tungaloy VCMT160402-TM T9225 inserts, contact Metav Werkzeuge for personalised advice and rapid delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951591 Manufacturer SKU: TUN6951591 SKU: 6951591-Tungaloy Label: VCMT160402-TM T9225 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 7° Approach/cutting angle: 35° Special features Geometry: rhombic VCMT 160402 Chipbreaker: TM Grade: T9225 Coating: CVD-coated carbide Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning, medium-to-heavy steel Material: carbide FAQ Which materials is this insert best suited for? The VCMT160402-TM T9225 insert from Tungaloy is optimised for medium-to-heavy steel turning; the T9225 grade provides increased toughness for variable engagement and light interruptions. What does the TM chipbreaker do for machining? The TM chipbreaker on this insert promotes controlled chip fragmentation and reliable evacuation, improving process stability and reducing the likelihood of chip-related surface defects. How is compatibility with toolholders determined? Compatibility relies on geometry and dimensions: form, clearance angle, tolerance class, fastening, size (16 mm) and plate thickness (4.76 mm) determine correct fit for holders intended for ISO VCMT inserts. What advantages does the CVD coating provide? The CVD-coated carbide increases wear resistance and maintains a sharper cutting edge for longer, which supports consistent surface finish and extends tool life under demanding steel machining conditions. Which dimensions should be confirmed before ordering? Check insert designation VCMT160402, size 16 mm, plate thickness 4.76 mm, corner radius 0.2 mm and the hole/countersink specification to ensure fit with the chosen toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160404 AH120 Wendeplatten - Tungaloy
Take advantage of a wear-resistant PVD-coated AH120 carbide grade and the PS chipbreaker for consistent chip control and extended edge life; its ISO rhombic form and standardised dimensions simplify tool sourcing and machine setup. Order the VCMT160404-PS AH120 directly via Metav Werkzeuge or consult the technical advisors for cutting data and holder compatibility. VCMT 160404 AH120 ISO turning insert VCMT160404-PS — PVD-coated carbide, 0.4 mm radius (Tungaloy) A VCMT160404-PS AH120 rhombic ISO turning insert designed for external and internal turning, combining a sharp cutting edge with a process-secure, wear- and chipping-resistant PVD-coated carbide grade PVD-coated carbide AH120 for extended tool life PS chipbreaker for controlled chips 0.4 mm corner radius for accurate profiling ISO rhombic VCMT form with central hole Consistent chip control for reliable production The engineered PS chipbreaker works with the PVD-coated AH120 carbide to maintain short, consistent chips and limit edge wear, which increases process stability. Shorter, well-controlled chips reduce the risk of entanglement and allow higher uninterrupted running times, lowering downtime and improving overall throughput. The combined effect is a measurable gain in productivity and a reduced need for frequent tool changes, providing a clear cost‑benefit in batch and continuous turning operations. Geometry that delivers repeatable accuracy and surface quality The rhombic insert geometry, with an approach angle of 35°, a 0.4 mm corner radius and a 7° clearance angle, balances cutting forces and contact area to improve surface finish while protecting the cutting edge. The 4.76 mm plate thickness and standard 16 mm insert size provide rigidity in a variety of external and internal setups. These dimensional choices ensure repeatable accuracy part after part and help achieve consistent tolerances with stable feed and speed settings on lathes and turning centres. ISO compatibility for straightforward tool management As an ISO‑standard turning insert, the VCMT form integrates into common holder systems, simplifying inventory and reducing setup complexity: the complete system comprises the insert, an appropriate external holder or boring bar, a backing shim or clamp kit and replacement screws. The central hole with a cylindrical bore plus a single‑sided countersink (40°–60°) ensures secure fastening and accurate seating. The PVD coating enhances thermal and wear resistance, while the carbide substrate maintains the required edge integrity for process‑secure turning. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for cutting data, holder compatibility checks and ordering of Tungaloy VCMT160404-PS AH120 turning inserts Technical data Article number: 6837209 Manufacturer SKU: TUN6837209 SKU: 6837209-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: VCMT160404-PS AH120 Facts ISO code: 160404 Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 35° Clearance angle: 7° Hole: with hole; cylindrical bore + one-sided countersink (40°–60°) Special features Material: carbide Coating: PVD-coated (AH120) Chipbreaker: PS Plate form: rhombic (VCMT) Application: turning (external and internal) Wear- and chipping-resistant grade Compatible with standard ISO holders; compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What turning operations suit this insert best? The VCMT160404-PS AH120 is intended for both external and internal turning operations where a sharp cutting edge and process reliability are required; choose the PS chipbreaker and AH120 grade based on workpiece stability and material. How does the PS chipbreaker influence machining? The PS chipbreaker promotes short, controllable chips and stabilises cutting conditions, which improves surface finish and reduces heat concentration, helping the AH120 grade maintain edge integrity. Which dimensions determine holder compatibility? Holder compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation 160404 and the central hole with countersink aid correct seating. What are the main benefits of the AH120 PVD coating? The PVD-coated AH120 grade provides improved wear resistance and a sharper, more stable cutting edge under common turning conditions, extending tool life and supporting consistent process performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com