CCMT 060204 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide and a 0.4 mm nose radius for reliable edge stability and controlled wear in the machining of heat‑resistant alloys; compatible with ISO CCMT holders. Order the insert directly via Metav Werkzeuge or request application advice from our specialists. CCMT 060204 AH8015 Turning Insert — PVD-coated Carbide, 0.4 mm Radius | Tungaloy CCMT 060204 AH8015 is an ISO‑standard rhombic indexable insert for turning, designed for general machining of heat‑resistant alloys and for adaptable use in external and internal turning operations PVD-coated carbide grade AH8015 Optimised for heat‑resistant alloys Rhombic CCMT shape, 80° cutting edge Single-sided chipbreaker, 0.4 mm nose radius High-performance coating and substrate for longer tool life The combination of a PVD-coated surface with a wear‑resistant carbide substrate provides a robust balance between oxidation resistance and cutting‑edge strength. The AH8015 grade is specified for the general machining of heat‑resistant alloys, offering improved resistance to flank and crater wear while maintaining a stable cutting edge. For production environments that prioritise consistency, this coating/substrate pairing reduces the frequency of index changes and contributes to lower overall tooling costs. Geometry that stabilises cutting and improves surface finish The insert’s rhombic CCMT form with an 80° approach angle delivers a secure seating in standard ISO holders and produces predictable chip flow. The 0.4 mm nose radius supports fine finishing passes and good surface integrity without excessive cutting forces. A single-sided chipbreaker is integrated to moderate chip shape and evacuation, which is particularly beneficial when machining less stable setups or interrupted cuts. The moderate relief angle of 7° helps to avoid rubbing and supports controlled metal removal. Practical application guidance and process benefits This indexable insert suits both external and internal turning; selection of the correct chipbreaker and the AH8015 grade should be matched to the workpiece material, the intended depth of cut and machine‑tool stability. When paired with a suitable external holder or boring bar, the insert enables predictable cycle times and repeatable component tolerances. The PVD finish makes the grade especially useful where elevated temperatures occur at the cutting zone, preserving the cutting edge and enabling longer uninterrupted production runs. System compatibility and handling in the workshop The insert is part of an ISO‑standard system comprising the insert, a matched external holder or boring bar, supporting shim/clamp sets and replacement screws. Compatibility is determined by the insert form, clearance angle (7°), tolerance class, clamping method, size (06) and thickness (2.38 mm). The cylindrical hole with a single-sided countersink (40°–60°) simplifies secure fastening and repeatable positioning during index changes. Routine handling is straightforward and indexing restores cutting performance without regrinding. For application advice, availability or to request a cutting test recommendation for the Tungaloy CCMT 060204 AH8015 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6825743 Manufacturer SKU: TUN6825743 SKU: 6825743-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Nose radius: 0.4 mm Relief angle: 7° Approach angle: 80° Thickness: 2.38 mm Insert size: 06 Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features PVD-coated carbide Grade AH8015 Rhombic CCMT shape Single-sided chipbreaker Compatible with ISO CCMT holders (form, clearance, tolerance, clamping, size, thickness) Intended use: turning (external and internal) Typical system: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ Which materials is this insert best suited for? The CCMT 060204 AH8015 insert is specified as a first choice for the general machining of heat‑resistant alloys; matching the chipbreaker and cutting data extends its use to a range of common turning tasks. What are the key geometric characteristics to note? Key dimensions include a 0.4 mm nose radius, 7° clearance, 80° approach angle, 2.38 mm thickness and the CCMT rhombic form with a cylindrical hole and single‑sided countersink. How is compatibility with a toolholder ensured? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; these factors must match the chosen ISO‑standard holder for secure, repeatable seating. Can the insert be used for internal turning and finishing passes? Yes, the geometry and 0.4 mm nose radius make the insert suitable for both internal turning and light finishing passes when mounted in the appropriate boring bar. How should the chipbreaker and grade be selected for a given job? Selection should be based on the workpiece material, cut depth and machine/tooling stability; the AH8015 grade provides a compromise between wear resistance and edge stability and works well with the specified chipbreaker for heat‑resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance and edge stability for consistent turning performance; the PVD-coated carbide grade AH8015 and the 0.4 mm corner radius deliver predictable results on heat-resistant alloys. Order directly via Metav Werkzeuge or request tailored advice from our consultants. CCMT 060204 AH8015 indexable insert for turning — Tungaloy CCMT060204 AH8015 Tungaloy-Wendeplatte designed for ISO-spec turning of heat-resistant alloys with a one-sided chipbreaker ISO‑format rhombic insert for turning PVD‑coated carbide AH8015 0.4 mm corner radius for reliable finishes One-sided chipbreaker for stable chip control High-precision cutting that improves cycle consistency and reduces rework The PVD-coated carbide grade offers an optimised balance between wear resistance and edge toughness, making it a sound choice for repetitive turning operations on heat-resistant alloys. The rhombic geometry with an included angle of 80° ensures stable engagement and reduced vibration, which translates into fewer rejects and more predictable cycle times. For shops aiming to improve throughput, the controlled geometry reduces chatter and supports consistent surface quality without frequent insert changes. Durable edge geometry and controlled chip formation for safer machining The single-sided chipbreaker combined with a 0.4 mm radius provides a compromise between strength and surface finish: stronger edges for interrupted cuts, yet fine enough for acceptable finishes in semi-finish and finishing passes. Chip formation is directed by the insert’s relief and chipbreaker design, reducing entanglement and improving tool life. The 7° relief angle helps to manage cutting forces and thermal loads, extending service intervals and lowering tooling consumption in demanding materials. Compatibility guidance to integrate the insert into existing toolrooms This ISO‑format insert is intended for use with compatible holders matching form, clearance, tolerance class, clamping method, size and thickness; the system comprises the insert, a matching external holder or boring bar, a clamp or shim set and replacement screws. The plate is supplied with a hole featuring a cylindrical bore and a single‑side countersink (40°–60°), simplifying secure clamping. With a thickness of 2.38 mm and ISO designation 060204, this insert links readily into standard tooling systems and helps avoid adapter costs when holders are correctly specified. Contact Metav Werkzeuge for a technical fit check or to request a quotation for Tungaloy turning inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6825781 SKU: 6825781-Tungaloy Manufacturer SKU: TUN6825781 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 060204 Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Special features PVD‑coated carbide grade AH8015 Rhombic plate form With hole: cylindrical bore + one‑side countersink (40°–60°) One‑sided chipbreaker Designed for turning applications Compatibility depends on form, relief, tolerance class, clamping and size FAQ What materials is this insert best suited for? The CCMT060204 AH8015 insert is formulated for general machining of heat‑resistant alloys; the PVD‑coated carbide composition provides a compromise between wear resistance and edge stability for such materials. Can this insert be used in existing ISO holders? Yes; the insert follows ISO dimensions (060204) and a standard thickness of 2.38 mm, so it will fit holders that match form, relief, tolerance class, clamping method and size. How does the one-sided chipbreaker affect machining? The one‑sided chipbreaker on the AH8015 grade directs chips reliably for turning operations, improving evacuation and reducing the risk of chip control issues in both continuous and interrupted cuts. What performance benefits does the AH8015 PVD coating bring? The PVD coating on the AH8015 carbide enhances resistance to abrasion and thermal wear, delivering longer service life and consistent edge behaviour when turning demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 carbide grade, ISO rhombic geometry with a 0.4 mm corner radius and a 7° clearance angle for consistent turning of heat‑resistant alloys; these features deliver a reliable balance of wear resistance and edge stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT 060204 AH8015 Tungaloy turning insert — ISO rhombic, PVD‑coated carbide The CCMT060204 AH8015 is a rhombic ISO turning insert engineered for external and internal turning of heat‑resistant alloys with standard clamping systems. ISO rhombic geometry, compatible with standard holders PVD-coated AH8015 carbide for heat-resistant alloys 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Reliable performance for demanding turning operations The combination of a PVD‑coated surface and AH8015 carbide creates an insert that is optimised for elevated temperatures and abrasive conditions commonly encountered when machining heat‑resistant alloys. The coating reduces adhesive wear and extends tool life, while the substrate retains cutting‑edge stability under intermittent and continuous cuts. This results in fewer insert changes, more predictable cycle times and a stable productivity profile for batch and single‑piece production alike. Predictable chip control and consistent edge life A single‑sided chipbreaker together with the 0.4 mm corner radius and the 7° clearance angle provides controlled chip formation and reliable surface finish on a range of workpiece materials. The insert’s 80° included angle distributes cutting forces to improve edge robustness and reduce vibration on less rigid setups. For operations that prioritise dimensional consistency, this geometry supports repeatable results with reduced risk of edge chipping and unexpected downtime. Seamless integration with ISO clamping systems Designed to ISO dimensions, the insert fits standard rhombic pockets and is secured via the provided hole geometry: a cylindrical hole with a 40°–60° countersink, which ensures correct seating and repeatable positioning in compatible holders. With a plate thickness of 2.38 mm and size code 06, the component integrates into existing toolrooms without special adapters. Selection of an appropriate holder should consider form, clearance, tolerance class, fastening and insert thickness to guarantee optimum contact and heat dissipation. Application guidance and process relevance This turning insert is a first‑choice grade for general machining of heat‑resistant alloys where a balance between wear resistance and edge toughness is required. The CCMT060204 AH8015 insert suits both external and internal turning when paired with a matching external holder or boring bar, under stable machining conditions. For tailored recommendations on cutting parameters or holder selection, consult Metav Werkzeuge to align the insert’s capabilities with the specific workpiece material and machine dynamics. For tailored recommendations on the Tungaloy CCMT060204 AH8015 insert and optimal holder selection, contact Metav Werkzeuge for application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749946 Manufacturer article number: 6749946 Manufacturer SKU: TUN6749946 SKU: 6749946-Tungaloy Model series: ISO turning inserts Designation: CCMT060204 AH8015 Tungaloy insert Material: carbide Coating / grade: PVD-coated, AH8015 Shape: rhombic With hole: yes Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size code: 06 Special features Single-sided chipbreaker Cylindrical hole with 40°–60° countersink ISO-standard dimensions for compatibility Suitable for external and internal turning Balanced wear resistance and edge stability for heat-resistant alloys Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The Tungaloy CCMT060204 AH8015 insert is designed primarily for machining heat‑resistant alloys; its PVD‑coated AH8015 carbide provides a balance between wear resistance and edge stability for these materials. Which holders are compatible with this ISO insert? Holders compatible with ISO rhombic inserts that accept size 06 and the specified thickness 2.38 mm are suitable; correct seating depends on form, clearance, tolerance class and the cylindrical hole with 40°–60° countersink provided. How does the single‑sided chipbreaker affect performance? The single‑sided chipbreaker improves chip control and surface finish in many turning operations; on the CCMT060204 AH8015 it supports consistent chip formation while preserving cutting‑edge stability. Is the insert suitable for internal turning? Yes, the insert’s geometry and ISO‑standard dimensions permit use for both external and internal turning when paired with an appropriate boring bar or internal holder. What is the correct way to specify this product when ordering? Specify the full designation and SKU: CCMT060204 AH8015 Tungaloy insert, SKU 6749946‑Tungaloy, to ensure accurate identification of the PVD‑coated AH8015 carbide grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 grade, ISO compatibility and a secure clamping geometry for reliable turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical team for process-adapted recommendations. CCMT 060204 AH8015 ISO rhombic indexable turning insert for turning — Tungaloy A CCMT 060204 AH8015 indexable insert designed for external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and edge stability. PVD-coated carbide AH8015 for heat-resistant alloys ISO rhombic insert CCMT 060204, 7° clearance Single-sided chipbreaker for controlled chip flow Cylindrical hole with 40°–60° countersink for secure clamp Stable performance for demanding alloy turning The PVD-coated AH8015 grade is formulated for the general machining of heat-resistant alloys, delivering a compromise between wear resistance and cutting-edge robustness. A PVD coating reduces adhesion and thermal softening at the cutting edge, which means longer, more predictable tool life under elevated temperatures. For production environments where material mix and cycle times vary, this insert maintains cutting performance and helps avoid unscheduled tool changes, supporting greater process stability and throughput. Secure fit and consistent clamping for repeatable results Compliance with ISO dimensions simplifies toolholder selection: form, clearance, tolerance class, fastening and thickness determine compatibility with standard holders and boring bars. The rhombic 06 format and the cylindrical hole with a one-sided countersink (40°–60°) ensure a stable mechanical location and reliable torque transfer to the clamp. The 7° clearance angle reduces rubbing on the flank, contributing to consistent surface finish and reducing the risk of built-up edge during continuous turning operations. Controlled chip formation and improved surface quality A single-sided chipbreaker offers reliable chip control for many turning tasks, while the 0.4 mm corner radius and a plate thickness of 2.38 mm provide the necessary rigidity for steady cuts. The modest corner radius helps achieve good edge strength without sacrificing surface integrity on components that require a fine finish. In short-cycle production or batch work, these design choices translate into fewer interruptions for chip management and a higher first-pass yield. For machining heat-resistant alloys with documented process stability, request the CCMT 060204 AH8015 indexable insert from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6749950 SKU: 6749950-Tungaloy Manufacturer SKU: TUN6749950 Brand: Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 06 ISO code: 060204 Lead/insert angle: 80° Clearance angle: 7° Special features Material: carbide Coating: PVD Plate shape: rhombic Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Grade/Specialty: AH8015 — for heat-resistant alloys FAQ What materials is this insert suitable for? The CCMT 060204 AH8015 indexable insert is intended primarily for heat-resistant alloys; the AH8015 grade and PVD coating offer balanced wear resistance and edge stability for such materials. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) provides secure seating and reliable clamping force for the Tungaloy insert, reducing movement during cutting and improving repeatability. Can this insert be used for both external and internal turning? Yes — the ISO rhombic format and specified geometry make the CCMT 060204 AH8015 suitable for both external and internal turning operations when paired with compatible holders or boring bars. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius gives a compromise between cutting-edge strength and surface finish, enabling stable cuts while helping to achieve a consistent finish on turned parts. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions (060204) and is compatible with holders that match the form, clearance, tolerance class, fastening method, size and thickness as specified for ISO turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) and a 0.4 mm nose radius for consistent surface quality and predictable wear behaviour; the ISO format ensures straightforward replacement and compatibility with standard holders. Order the CCMT060204 AT9530 insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060204 AT9530 turning insert for finishing — Tungaloy A CCMT060204 AT9530 ISO turning insert optimised for finishing and light turning of steel, providing reliable surface quality and even wear in stable setups. Coated cermet grade AT9530 for finishing 0.4 mm nose radius for superior surface finish Rhombic CCMT shape, 7° clearance angle Cylindrical hole with 40°–60° countersink Achieve consistent finishing with a coated cermet grade The insert is specified for finishing and light machining of steel, where surface quality and uniform wear are primary concerns. The AT9530 coated cermet delivers a fine-grained cutting edge that reduces built-up edge and promotes repeatable finishes. In practical terms, this means fewer passes to reach tolerance and less time spent on secondary processes. Because the grade is designed for stable wear behaviour, process planning becomes more predictable and scrap rates are reduced. The combination of a controlled edge geometry and a wear-resistant coating helps maintain dimensional accuracy over a series of components, which benefits batch production and small-series finishing alike. Designed for predictable fit and secure clamping in ISO systems Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the ISO CCMT060204 format aligns with widely used holders and tool systems. The rhombic geometry with a 7° clearance angle provides a balance between cutting-edge engagement and strength, while the cylindrical hole with a 40°–60° countersink secures the insert on the clamping seat. When planning a toolset, select holders that match the CCMT profile and tolerance class to ensure the correct rake, overhang and rigidity. Proper clamping and a matched insert-seat interface reduce vibration and support consistent tool life, which in turn supports process stability on lathes and turning centres. Practical machining guidance based on geometry and chip control The 0.4 mm nose radius is engineered to favour surface finish without demanding high cutting depths; a small radius allows fine feeds for improved roughness while still providing sufficient edge strength for light finishing passes. The insert’s single-sided chipbreaker is intended to assist chip control during external and internal turning operations when paired with appropriate feeds and cutting conditions. For finishing cuts, combine modest depth of cut with a lower feed to exploit the radius for surface integrity; for unstable setups, consider a different chipbreaker or a more robust grade, as the AT9530 prioritises finish and even wear over heavy material removal. Process benefits and suitability for production environments Using this insert in a standardized ISO format contributes to reduced tool change complexity and predictable inventory management. The coated cermet composition emphasises surface quality and even flank wear, which lowers rework and inspection effort in finishing operations. For production environments where component appearance and dimensional repeatability are important, the insert offers a reliable option for steel turning applications that require fine finishes. The ISO format and common geometry simplify replacement logistics, enabling quicker changeovers and less downtime when matching inserts are stocked. Contact Metav Werkzeuge for expert advice on selecting Tungaloy CCMT060204 AT9530 inserts for finishing steel and to arrange direct supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6763902 SKU: 6763902-Tungaloy Manufacturer SKU: TUN6763902 Designation: CCMT060204 AT9530 Tungaloy insert Material: carbide Grade/coating: AT9530 (coated cermet) Shape: rhombic Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Thickness: 2.38 mm Corner radius: 0.4 mm Facts ISO code: 060204 Size: 06 Clearance angle: 7° Included angle: 80° Plate thickness: 2.38 mm Nose radius: 0.4 mm Special features Single-sided chipbreaker Intended use: turning (external and internal), finishing and light machining of steel ISO-standard turning insert series Compatibility depends on form, clearance, tolerance class, fastening, size and thickness System concept: insert, suitable external holder or boring bar, backing/clamping set and replacement screws FAQ What applications is this insert best suited to? This CCMT060204 AT9530 Tungaloy turning insert is best suited to finishing and light machining of steel where surface quality and uniform wear are priorities. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius improves surface finish by allowing finer feeds for finishing passes while maintaining sufficient edge strength for light cutting on steels with stable setups. Will this insert fit standard holders for CCMT inserts? Yes; the insert follows ISO CCMT dimensions. Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness and requires a matching CCMT holder. What chip control can be expected from the insert? The insert features a single-sided chipbreaker designed to assist chip evacuation during turning; chip shape and performance depend on workpiece material, feed and depth of cut. Is this grade suitable for heavy roughing? The AT9530 coated cermet is optimised for finishing and light machining rather than heavy roughing; for high metal removal rates a more robust grade or geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, long tool life and precise ISO geometry for reliable turning operations; order the CCMT 060204 DX120 insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT 060204 DX120 indexable insert for turning — Tungaloy CCMT 060204 DX120 is a PCD-grade indexable insert designed for high-speed machining of aluminium and non-ferrous materials, supplied in ISO CCMT 06 geometry for external and internal turning. PCD cutting material DX120 for high speeds ISO CCMT 06 geometry with 0.4 mm nose radius Suitable for aluminium and non-ferrous metals Cylindrical hole with single-side countersink Maximise productivity with a PCD grade built for speed and longevity The PCD cutting layer of the DX120 grade delivers extremely high cutting speeds and very long tool life when machining aluminium and abrasive non-metals. Polycrystalline diamond enables low wear rates and excellent surface finish, which reduces downtime for insert changes and lowers overall machining costs. Where process stability allows, selecting a PCD grade significantly increases productivity compared with conventional carbide grades, especially in continuous production of non-ferrous components. Secure clamping and geometry for repeatable, accurate turning The insert’s ISO CCMT 06 form and rhombic geometry provide a stable cutting edge and predictable engagement with the workpiece. The cylindrical hole with a single-side countersink (40°–60°) ensures positive seating and repeatable clamping, while the 7° clearance supports reliable chip evacuation and reduces rubbing. These features together improve positional repeatability and make the insert well suited to holders and boring bars that conform to ISO tolerances. Optimised edge and dimensions for finishing and light roughing A 0.4 mm nose radius and 2.38 mm thickness allow fine surface finishes and controlled chip formation in delicate turning operations. The relatively small radius supports precise profile machining and minimal vibration in well-supported setups. When combined with a suitable single-side chipbreaker, the cutting edge promotes stable chip formation and consistent surface integrity, making the grade appropriate for both finishing passes and certain interrupted cuts on aluminium alloys and similar materials. System considerations and recommended workflow The ISO indexable insert is part of a system comprising the insert, a matching external holder or boring bar, a shim/lock set and replacement screws. Compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; choosing a holder that matches the CCMT 060204 geometry and clamping style is essential for secure performance. For best results, pair the insert with a rigid toolholder and maintain consistent coolant or air-blast strategies suited to PCD cutting, avoiding toolholders that introduce excessive run-out. For procurement or detailed application support on Tungaloy DX120 PCD inserts, contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for rapid advice and availability. Technical Data Item designation: CCMT060204 DX120 Tungaloy indexable insert Manufacturer article number: 6822152 Manufacturer SKU: TUN6822152 SKU: 6822152-Tungaloy Model series: ISO turning indexable inserts Facts Nose radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size: 06 Special features Cutting material: polycrystalline diamond (PCD) Grade: DX120 Body material: cemented carbide Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: single-side chipbreaker Application: turning (external and internal) FAQ What materials is this insert intended for? The CCMT 060204 DX120 insert is designed primarily for aluminium and non-ferrous metals as well as abrasive non-metallic materials; the PCD DX120 grade provides extended life in these applications. Can the insert be used for internal turning as well as external turning? Yes, the ISO CCMT 06 geometry and the specified dimensions allow the insert to be used for both external and internal turning, provided the selected holder and setup offer sufficient rigidity. How does the 0.4 mm nose radius affect the surface finish? A 0.4 mm nose radius helps achieve finer surface finishes and more accurate profiles in finishing passes while still permitting light roughing when the machine setup is stable. What clamping features ensure repeatable seating? The cylindrical hole with single-side countersink provides secure, repeatable clamping when used with compatible shims and screws, reducing positional variation between indexings. Is the insert compatible with standard ISO CCMT holders? Compatibility is determined by form, clearance, tolerance class, fixing, size and thickness; the insert is made to ISO CCMT 06 specifications and matches holders designed for that standard. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GH730 Wendeplatten - Tungaloy
Combining proven wear resistance, stable cutting-edge integrity and standardised ISO compatibility, this insert supports productive turning operations with predictable tool life and consistent surface finish. Take advantage of the balanced geometry and Tungaloy's GH730 grade for robust machining; order the CCMT060204 directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060204 GH730 Tungaloy turning insert — ISO rhombic 80° for external and internal turning The CCMT060204 GH730 is an ISO rhombic turning insert designed for general-purpose external and internal turning, offering a balance of edge strength and wear resistance for a wide range of turning tasks. ISO rhombic insert 80° geometry GH730 Tungaloy carbide grade 0.4 mm corner radius for strength Cylindrical hole with countersink 40°–60° Consistent productivity through material and grade The combination of cemented carbide substrate with the GH730 grade offers enhanced wear resistance without sacrificing toughness. This balance reduces the frequency of tool changes and maintains cutting-edge integrity under interrupted cuts. When mounted in a suitable toolholder, the cutting edge sustains dimensional stability over longer runs, which translates directly into higher throughput and fewer rework cycles. The grade is especially useful where a compromise between abrasion resistance and edge stability is required. Reliable fit and clamping for repeatable results Designed to the ISO specification, compatibility with the toolholder depends on form, relief angle, tolerance class, fastening, size and thickness. The CCMT060204 features a rhombic 80° form and a cylindrical hole with a one-sided countersink (40°–60°) that ensures secure clamping and repeatable seating. Using the correct shim and clamp set prevents movement under cutting loads and preserves the intended cutting geometry. Clear, repeatable mounting helps to avoid chatter and secures consistent surface quality part after part. Geometry tuned for edge strength and surface finish The rhombic 80° shape combined with a 0.4 mm corner radius gives a robust cutting edge capable of handling moderate depths of cut while helping to produce stable surface finishes. The 7° relief angle reduces rubbing and heat generation at the flank, while the single-sided chipbreaker promotes controlled chip formation for common turning tasks. A plate thickness of 2.38 mm supports the insert in the pocket and contributes to mechanical stability under load, reducing the risk of insert breakage during interrupted cuts. Practical system guidance and typical applications This insert is intended for turning operations; select the chipbreaker and grade to suit the workpiece material, machining strategy and machine stability. The typical system includes the ISO insert, a matching external holder or boring bar, a support shim or clamp set and replacement screws to maintain consistent assembly. For tougher materials or heavy cuts choose a more robust chipformer and ensure rigidity in the clamping system. For finishing passes, consider a finer feed and the same geometry to keep surface quality high while taking advantage of the grade's wear resistance. For application-specific advice or to order the CCMT060204 GH730 turning inserts from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options. Technical data Article number: 6820962 Manufacturer SKU: TUN6820962 Brand: Tungaloy Designation: CCMT060204 GH730 Facts Corner radius: 0.4 mm Insert angle: 80° Relief angle: 7° Thickness: 2.38 mm Size: 06 Special features Cemented carbide composition GH730 Tungaloy grade Rhombic shape (80°) Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) ISO-standard turning insert System components: insert, holder/boring bar, support shim, clamp set, replacement screws FAQ What materials is this insert suitable for? The CCMT060204 GH730 insert is a general-purpose turning grade; the GH730 composition supports a broad material range and is chosen according to workpiece material and machining strategy. How does the rhombic 80° geometry affect cutting? An 80° rhombic shape increases edge strength and is suitable for both external and internal turning where a balance of robustness and accessibility is required. What does the hole and countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and exact seating in standard ISO toolholders, improving repeatability and reducing vibration. Which system parts are required for safe operation? A matching external holder or boring bar, proper support shim or clamp set and correct replacement screws complete the system and ensure stable, repeatable machining. Is this insert suitable for finishing passes? Yes; with the 0.4 mm corner radius and GH730 grade, the insert can deliver good surface finishes when used with appropriate feeds and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GH730 Wendeplatten - Tungaloy
Taking advantage of ISO standardisation and the GH730 Tungaloy grade, this rhombic carbide insert delivers consistent wear resistance and stable cutting-edge performance; its 0.4 mm corner radius and secure hole geometry ensure reliable clamping and repeatable results for turning operations. Order directly via Metav Werkzeuge or consult their specialists for application-specific guidance. CCMT 060204 GH730 Tungaloy indexable insert for turning (ISO CCMT060204) The CCMT060204 GH730 is a rhombic ISO indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and cutting-edge stability for industrial machining. ISO size CCMT 06 (060204) for standard holders GH730 grade for high wear resistance 0.4 mm corner radius for general turning Cylindrical hole with 40°–60° countersink Longer tool life through a wear-resistant grade The insert is manufactured from solid carbide and specified in the GH730 grade, which combines abrasion resistance with sufficient toughness to resist chipping under typical turning loads. This composition reduces flank wear and extends cutting intervals, translating into fewer tool changes and improved uptime on production lathes. The result is a stable cutting edge that supports consistent dimensional accuracy over longer component runs. Secure clamping and precise fit for ISO systems Designed as an ISO-standard rhombic insert, the geometry—including the cylindrical hole with a one-sided countersink (40°–60°) and the 7° clearance—ensures compatibility with a wide range of external holders and boring bars. The 2.38 mm plate thickness and clearly defined tolerances assist in repeatable seating and accurate axial and radial positioning, reducing the risk of movement under load. This reliability in clamping improves part consistency and minimises rework. Chip control and application-focused geometry The single-sided chipbreaker and the rhombic form factor provide stable chip formation for a range of turning tasks, from finishing to profile cuts. The 0.4 mm corner radius offers a practical compromise between edge strength and surface finish, suitable for general-purpose external and internal turning. By selecting the appropriate chipbreaker and the GH730 composition, shops can adapt the insert to different materials and machining strategies while maintaining process security. Practical compatibility and system integration As part of the ISO indexable insert family, the component integrates into a system comprising the insert, a matching external holder or boring bar, and the necessary clamping hardware. Compatibility is governed by form, clearance angle, tolerance class, fastening type, size and thickness—factors that determine fit and performance. The insert is therefore best specified alongside the chosen holder geometry to ensure optimal cutting conditions and predictable tool life. For industrial turning applications that demand dependable wear resistance and consistent clamping, request the Tungaloy CCMT060204 GH730 inserts via Metav Werkzeuge or contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or +49 2822 7131930 for selection support and ordering. Technical data Article number: 6820961 SKU: 6820961-Tungaloy Manufacturer SKU: TUN6820961 Material: carbide Model series: ISO-Drehwendeschneidplatten Designation: CCMT060204 GH730 Tungaloy indexable insert Description: CCMT060204 GH730 Tungaloy indexable insert. ISO-standard indexable turning plates; holder compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Dimensions & angles Size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Main angle: 80° Design & special features Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Grade/coating: GH730 Tungaloy grade Typical application: turning System components: ISO insert, matching external holder or boring bar, support/fastening kit and replacement screws FAQ What materials can this insert machine effectively? The GH730 composition on the CCMT060204 insert is formulated for general turning and delivers reliable wear resistance across a wide range of steels and alloyed materials commonly encountered in workshop production. Is the insert compatible with standard CCMT holders? Yes, the insert follows the ISO CCMT060204 specification and is compatible with holders designed for CCMT 06 inserts, provided the holder matches the form, clearance angle and fastening method. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm radius offers a balance between edge strength and surface finish; it improves resistance to edge chipping while delivering a satisfactory surface quality for general turning operations. Does the insert require a specific screw or clamp style? Clamping must match the ISO geometry and the insert’s hole style; the CCMT060204 includes a cylindrical hole with a one-sided countersink (40°–60°) for secure seating in standard clamping systems. Can this insert be used for internal and external turning? Yes, the rhombic form and single-sided chipbreaker make the insert suitable for both external and internal turning tasks when combined with the appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GH730 Wendeplatten - Tungaloy
Benefit from the combination of a wear‑resistant GH730 grade and a precise 0.4 mm corner radius for consistent, repeatable results in turning operations. Order the CCMT060204 GH730 insert via Metav Werkzeuge or request technical advice from our consultants. CCMT 060204 GH730 turning insert — Tungaloy CCMT060204 GH730 is an ISO‑normed rhombic turning insert designed for external and internal turning with a single‑sided chipbreaker. ISO‑normed CCMT geometry GH730 wear‑resistant carbide grade 0.4 mm corner radius for fine profiles Cylindrical hole with countersink (40°–60°) Consistent chip control for productive turning The insert delivers controlled chip formation thanks to its single‑sided chipbreaker and the tailored geometry of the rhombic cutting edge. The GH730 grade combines wear resistance with edge stability, which results in longer service life and fewer interruptions for edge changes. This balance of properties supports stable metal removal in both roughing and finishing passes, reducing downtime and improving overall process efficiency. The 0.4 mm corner radius helps to maintain profile accuracy while resisting edge chipping under intermittent cuts. Precision fit and reliable clamping for repeatable parts Designed to the ISO CCMT specification, the insert ensures predictable seating and orientation in compatible holders. The 7° clearance and 2.38 mm thickness contribute to a secure fit and consistent cutting geometry, while the cylindrical hole + countersink (40°–60°) enables positive and reproducible clamping torque. These features minimise variation between inserts and permit high repeatability across batches, which is essential for tight tolerance production and automated turning cells. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness. Durable carbide grade and application guidance Manufactured from carbide and supplied in the GH730 specification, the insert is intended specifically for turning applications where a combination of wear resistance and edge toughness is required. The rhombic shape offers versatile approach angles for both external and internal turning. System composition typically includes the ISO insert, an appropriate external holder or boring bar, a seating pad or clamp set, and replacement screws. Select the chipbreaker and grade to match the workpiece material and the required machining stability to achieve consistent surface finish and tool life. For demanding turning tasks opt for the Tungaloy CCMT060204 GH730 insert — contact Metav Werkzeuge for availability and specialised technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6820963 SKU: 6820963-Tungaloy Manufacturer SKU: TUN6820963 Model series: ISO turning inserts Facts Radius: 0.4 mm Clearance angle: 7° Included angle: 80° Thickness: 2.38 mm Size: 06 Special features Material: carbide Grade: GH730 Shape: rhombic Chipbreaker: single‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) ISO designation: CCMT060204 Application: Turning FAQ What materials is the CCMT060204 GH730 insert suitable for? The CCMT060204 GH730 insert (Tungaloy) is formulated to offer broad application potential; the GH730 grade performs well where wear resistance and edge stability are required, making it suitable for a variety of steels and general turning tasks. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius on the CCMT060204 GH730 helps distribute cutting forces and reduces the risk of chipping, giving improved profile accuracy and longer edge life during interrupted or unstable cuts. Which holder characteristics must be matched for secure clamping? Secure clamping requires a holder that matches the ISO CCMT form, the specified relief (7°), the tolerance class, the insert size and thickness; correct seating and the cylindrical hole with countersink ensure reproducible fixation for the CCMT060204 GH730 insert. Can the CCMT060204 GH730 be used for both internal and external turning? Yes, the rhombic geometry and the chipbreaker design allow the CCMT060204 GH730 insert (Tungaloy) to be employed in both external and internal turning operations when paired with an appropriate external holder or boring bar. What length of service life can be expected from the GH730 grade? Service life depends on workpiece material, cutting data and stability, but the GH730 grade is engineered to balance wear resistance and toughness to provide reliable tool life in routine turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
High wear resistance and a fine surface finish reduce downtime while maintaining consistent turning performance; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order the CCMT060204 GT9530 directly via Metav Werkzeuge or ask the consultants for application-specific guidance. CCMT060204 GT9530 Tungaloy indexable insert for turning (ISO 060204) The CCMT060204 GT9530 Tungaloy indexable insert is a coated cermet grade engineered for external and internal turning where superior surface quality and extended tool life are required. Wear-resistant GT9530 coated cermet ISO 060204 rhombic insert form 0.4 mm nose radius for fine finish Cylindrical hole with 40°–60° countersink Consistent finish and longer tool life for finishing operations The GT9530 coated cermet grade provides a combination of hardness and toughness that is optimised for finishing and light universal turning of steel. The coating and substrate reduce flank wear and support a steady cutting edge, which translates into more parts per edge change and fewer interruptions to production. Cermets merge ceramic hardness with a metallic binder to offer a harder, more wear-resistant face than conventional carbides while retaining sufficient toughness for stable conditions; this results in noticeably improved surface finish and longer service intervals compared with uncoated grades. ISO compatibility and secure clamping reduce setup time The rhombic geometry and ISO designation enable straightforward interchangeability with standard holders; the insert’s dimensions and tolerances determine compatibility via shape, clearance angle, tolerance class, fixing style, size and thickness. Key dimensions such as ISO 060204, 2.38 mm thickness and a 7° clearance angle ensure predictable seating in ISO clamps. The cylindrical hole with a one-sided countersink (40°–60°) provides reliable axial and radial locating, improving repeatability when replacing inserts and reducing setup effort on the shop floor. Tailored cutting performance for steel with controlled chipflow Equipped with a one-sided chipbreaker and a 0.4 mm nose radius, this insert is tuned for fine surface results and stable chip formation in finishing passes. The grade is intended for stable setups where controlled cutting forces and consistent thermal behaviour are important; selecting the appropriate chipbreaker and machining parameters will maximise the benefit of the GT9530 grade. The small nose radius aids in achieving the required tolerances and visual quality on turned components while limiting the tendency for build-up on the cutting edge. Practical system design to support productivity The recommended system consists of the ISO indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to maintain fixture integrity. The carbide substrate provides a robust base for the coating, combining to deliver predictable edge stability under continuous operation. Where process reliability is paramount, selecting the correct holder geometry and ensuring rigid clamping will take full advantage of the insert’s wear characteristics and help to uphold part-to-part consistency across production runs. For precision finishing on steel where surface quality and longer tool life matter, contact Metav Werkzeuge for tailored application advice and immediate supply of Tungaloy CCMT060204 GT9530 indexable inserts. Technical data Article number: 6998303 Manufacturer article number: 6998303 SKU: 6998303-Tungaloy Manufacturer SKU: TUN6998303 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CCMT060204 GT9530 Facts Nose radius: 0.4 mm Thickness: 2.38 mm Free angle / clearance: 7° Included angle: 80° Size: 06 Countersink angle: 40°–60° Special features Grade/coating: GT9530 (coated cermet) Substrate material: carbide Shape: rhombic Hole: cylindrical hole with one-sided countersink Chipbreaker: one-sided Application: external and internal turning Compatibility: ISO 060204 holders FAQ What materials is this insert suitable for? The CCMT060204 GT9530 insert is designed primarily for steel and performs best in finishing to light universal turning under stable conditions with good surface finish requirements. How does the GT9530 grade influence tool life and finish? The GT9530 coated cermet offers increased wear resistance and thermal stability compared with uncoated carbide, resulting in extended tool life and improved surface quality on finishing passes. What does the 0.4 mm nose radius mean for component quality? A 0.4 mm nose radius enables finer surface finish and tighter dimensional control on turned parts; it is suited to finishing operations where form accuracy and appearance are important. Which holder features are required for correct seating? Correct seating requires a holder compatible with ISO 060204 inserts, matched tolerance class and a fixing system that accepts a cylindrical hole with one-sided countersink to ensure repeatable location. Is this insert suitable for internal as well as external turning? Yes, the geometry and chip control make the insert suitable for both external and internal turning when paired with the appropriate external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product listing contains contradictory substrate information that prevents a reliable product description. One entry identifies the cutting material as a coated cermet grade (GT9530), while another field names the base material as Hartmetall (carbide). Cermet and carbide are distinct tool substrate families with different mechanical and wear characteristics; they are not interchangeable designations. Before a full, industry-accurate description can be generated, please confirm whether the insert is a coated cermet grade GT9530 or a carbide-based insert, and verify any related fields such as coating, application and geometry. Once the substrate and coating are clarified, a complete EN-GB product text—aligned with ISO geometry, radius, clearance angle and manufacturer data—can be produced for technical and commercial use.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, coated cermet grade (GT9530) and the ISO CCMT060204 form for consistent finishing and extended tool life; the rhombic geometry with a corner radius of 0.4 mm provides fine surface quality while the standardised form ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. CCMT 060204 GT9530 – Indexable turning insert (coated cermet) by Tungaloy, 80° included angle CCMT060204 GT9530 is an ISO indexable turning insert designed for finishing and light universal turning of steel, offering a stable cutting edge and enhanced surface quality. ISO CCMT 06 size, rhombic form Coated cermet grade GT9530 Single-sided chipbreaker for finishing 7° clearance, 80° included angle Higher surface quality with longer tool life The coated cermet composition GT9530 combines the abrasion resistance of cermet coatings with a formulation optimised for finishing. This results in longer tool life and consistently improved surface finishes when machining steel under stable conditions. The small corner radius 0.4 mm reduces cutting forces and helps achieve fine part aesthetics while still allowing for light stock removal. For production environments where repeatable part quality and reduced rework are priorities, this insert provides a clear efficiency advantage through fewer tool changes and more predictable wear behaviour. Standardised form for reliable holder compatibility As an ISO-designated CCMT insert, the geometry follows established standards to ensure compatibility with a wide range of external holders and boring bars. The ISO CCMT060204 designation describes the rhombic shape and size, while the 2.38 mm thickness and the cylindrical hole with single-sided countersink (40°–60°) determine the correct clamping interface. Matching the insert to a holder requires checking form, clearance angle, tolerance class, fastening method, size and thickness; once these are aligned, the insert delivers repeatable positioning and stable cutting performance, reducing setup time and the risk of incorrect mounting. Application guidance and process benefits This insert is intended for turning operations where a combination of superior surface finish and competitive tool life is required. The single-sided chipbreaker is optimised for finishing to light universal turning in steel, promoting controlled chip formation when the machining setup is rigid and cutting parameters are consistent. Selecting this grade supports higher first-pass quality, which in turn lowers downstream polishing or grinding needs. For flexible production runs, pairing the insert with a suitably rigid holder and consistent clamping practice yields dependable results and helps maintain cycle-time stability. For advice on selecting the correct insert grade or verifying compatibility with specific holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our technical consultants will assess the application and recommend the optimal solution. Technical data Article number: 6998293 SKU: 6998293-Tungaloy Manufacturer SKU: TUN6998293 Model series: ISO turning indexable inserts Core specifications ISO designation: CCMT060204 Corner radius: 0.4 mm Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 Special features Coated cermet grade GT9530 Rhombic insert form, with hole Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker, finishing to light universal turning Intended application: turning of steel under stable machining conditions FAQ Which materials is this insert suited for? The CCMT060204 GT9530 insert from Tungaloy is optimised for machining steel, offering wear-resistant performance for finishing and light universal turning tasks. What is the effect of the 0.4 mm corner radius? A corner radius of 0.4 mm reduces cutting forces and supports finer surface finishes; the CCMT060204 geometry with this radius is suitable for delicate finishing passes and reduced risk of chatter when held in a rigid setup. How is the insert clamped in the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; correct holder selection requires matching form, size and thickness to ensure stable positioning of the CCMT060204 GT9530 insert. Is GT9530 a good choice for longer runs? Yes; the coated cermet GT9530 provides improved wear resistance and a stable cutting edge, contributing to extended tool life in repeatable, stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of the wear‑resistant GT9530 cermet grade and the ISO‑standard CCMT060204 format for stable finishing and extended tool life; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCMT 060204 GT9530 — Tungaloy indexable turning insert for finishing The CCMT 060204 GT9530 is an ISO‑standard rhombic indexable insert for finishing and light general turning, optimised for steel applications where surface quality and tool life under stable conditions are priorities. Coated cermet grade GT9530 for long tool life ISO CCMT 060204 rhombic insert, 7° clearance 0.4 mm nose radius for fine finishing Cylindrical hole with one‑sided countersink Consistent finishing and longer service intervals The coated cermet GT9530 provides a wear‑resistant cutting edge that improves surface finish and extends tool life compared with uncoated grades. As a cemented carbide insert designed for finishing, the combination of a refined micrograin substrate and the GT9530 coating reduces flank wear and thermal softening during steady‑state cuts. The small 0.4 mm nose radius helps achieve precise edge definition for fine external and internal turning, while the rhombic geometry ensures predictable contact with the workpiece and a clean parting line on finished components. Precise system fit and reliable mounting This ISO insert follows the CCMT060204 designation and is intended for use in compatible holders and boring bars. Compatibility depends on matching the insert form, clearance angle 7°, tolerance class, fixing method, size and thickness; correct matching secures repeatable seating and vibration‑free machining. The standardised form permits straightforward replacement and indexation, and the insert’s cylindrical hole with one‑sided countersink (40°–60°) supports positive clamping in many toolholder designs. Understanding these parameters simplifies tool selection and minimises downtime during changeover. Application guidance and recommended use Designed primarily for turning of steel in finishing to light universal operations, the single‑sided chipbreaker and cermet grade perform best in stable setups with good rigidity. The single‑sided chipbreaker assists chip control during continuous cuts; however, chipbreaker choice should match the workpiece material and cutting depth. For best results, moderate cutting speeds and conservative feeds are advised when first introducing a cermet grade, then optimisation can follow based on observed wear and surface finish. This approach secures productivity gains while protecting component quality. Contact Metav Werkzeuge for product availability and tailored application advice for the Tungaloy CCMT060204 GT9530 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998285 Manufacturer SKU: TUN6998285 Stock SKU: 6998285-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Core specifications ISO designation: 060204 Size: 06 Thickness: 2.38 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Features and compatibility Grade/coating: GT9530 (coated cermet) Chipbreaker: single‑sided Plate form: rhombic Hole style: cylindrical hole with one‑sided countersink (40°–60°) Application: turning (external and internal) System notes: compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The CCMT060204 GT9530 insert is formulated as a wear‑resistant cermet grade primarily for steel, offering superior surface quality in finishing and light universal turning. What are the key dimensions and geometry of the insert? The CCMT060204 GT9530 is a size 06 rhombic insert with 0.4 mm nose radius, 2.38 mm thickness, a 7° clearance angle and an 80° included angle (ISO 060204). How is holder compatibility determined? Compatibility for the CCMT060204 format depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness to the toolholder’s seat and clamping system. Which chipbreaker and cutting style suit this insert? This Tungaloy insert is supplied with a single‑sided chipbreaker, favouring continuous finishing cuts and stable turning operations where controlled chip flow and surface finish are required. How should cutting parameters be approached with a cermet grade? When introducing the GT9530 cermet grade, begin with moderate speeds and feeds in a rigid setup to assess wear and finish; adjust parameters incrementally to exploit the insert’s longer life while maintaining component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of consistent finishing performance, extended tool life from the GT9530 coating and secure ISO compatibility for reliable turning operations; order directly via Metav Werkzeuge or consult with the technical team for selection and clamping advice. CCMT060204 GT9530 indexable turning insert — rhombic ISO insert for turning by Tungaloy CCMT060204 GT9530 is an ISO rhombic indexable insert for turning, designed for finishing and light universal machining of steel under stable conditions ISO rhombic 80° geometry Coated cermet GT9530 grade Single-sided chipbreaker for fine finishes Cylindrical hole with 40°–60° countersink High-performance finishing with measurable gains The coated cermet GT9530 composition emphasises surface quality and wear resistance, making the insert particularly suited to finishing operations on steel. The combination of a fine-grain coating and a controlled cutting edge yields longer tool life under steady machining conditions and reduces the need for frequent index changes. That translates into higher uptime on production lathes and a more predictable production flow for batch or serial turning work. Secure compatibility and clamping for productivity The ISO format ensures compatibility with a wide range of external holders and boring bars when the form, relief angle, tolerance class, clamping method, size and thickness match. The insert’s 80° included angle and the supplied cylindrical hole with a single-sided countersink establish a stable mechanical interface, improving repeatability and torque transmission during cutting. A confident clamping arrangement reduces vibration and supports consistent surface finish and dimensional control in series production. Clear explanation of key geometries and their benefits The 0.4 mm corner radius balances edge strength and the ability to achieve a fine surface finish: a larger radius gives longer edge life, a smaller radius enables finer detail. The 7° relief angle reduces rubbing on the flank and helps maintain surface integrity at higher feed rates; the single-sided chipbreaker manages chip flow for finishing cuts, avoiding built-up edge and improving surface consistency. These parameters together define the insert’s behaviour in practical machining and help planners select the correct grade for their process. Recommended applications and process notes Designed for turning, the insert is best used where a high-quality finish on steel is required and where stable fixturing is available. The CCMT060204 geometry suits both external and internal turning with a focus on smooth finishes rather than heavy stock removal. For light universal machining or final passes the GT9530 grade delivers a favourable compromise between surface quality and tool life. For specific cycle optimisation or material mixes, Metav Werkzeuge consultants can advise on feeds, speeds and holder selection to match shop conditions. Contact Metav Werkzeuge for tailored application advice, compatibility checks and ordering information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical consultants will help specify the correct insert and holder combination for the intended turning task Technical data Article number: 6998298 Manufacturer SKU: TUN6998298 Stock SKU: 6998298-Tungaloy Brand: Tungaloy Model designation: CCMT060204 GT9530 Category: ISO turning indexable inserts Facts Insert thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Size: 06 ISO code: 060204 Special features Coated cermet grade GT9530 Single-sided chipbreaker Rhombic insert shape Cylindrical hole with 40°–60° countersink With hole (for central clamping) Application: Turning Typical use: finishing to light universal for steel FAQ What steels is this insert suitable for? The CCMT060204 GT9530 insert from Tungaloy is formulated for steels, offering good surface finish and longer tool life under stable turning conditions. How does the GT9530 grade differ from conventional grades? GT9530 is a coated cermet designed for wear resistance and surface quality; the coating and substrate combination provides extended life in finishing operations compared with standard uncoated inserts. Can this insert be clamped in standard CCMT holders? The insert follows ISO CCMT dimensions; compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness to the holder specifications. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm radius offers a compromise between edge strength and fine surface finish, supporting consistent finishes on finishing passes with reduced risk of edge chipping. Is the CCMT060204 GT9530 suitable for internal and external turning? Yes — the rhombic CCMT060204 geometry is suitable for both external and internal turning, primarily aimed at finishing and light universal operations on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp finishing grade and a small corner radius to achieve consistent surface quality in turning operations; the NS9530 cermet grade and 0.4 mm radius ensure low cutting forces and excellent finishes, while ISO conformity keeps toolholding straightforward — order via Metav Werkzeuge or request application advice from the consultants. CCMT060204 NS9530 Tungaloy turning insert — uncoated cermet, 0.4 mm corner radius The CCMT060204 NS9530 is an ISO rhombic turning insert designed for finishing steel with a sharp cutting edge, optimised for continuous cuts and fine surface results. ISO rhombic insert, size 06 Uncoated NS9530 cermet finishing grade 0.4 mm corner radius for fine surface quality 7° clearance angle for low cutting forces High-quality finishing with reduced cutting forces The NS9530 finishing grade is an uncoated cermet formulated for low cutting resistance and excellent surface integrity when machining steel. The combination of a sharp cutting edge and a 0.4 mm corner radius produces fine surface finishes at small depths of cut, making the insert particularly suited to continuous turning cycles. As a result, cycle times can be stabilised and rework reduced, creating a measurable efficiency gain in precision turning processes. ISO compatibility for predictable clamping and repeatable results The insert conforms to ISO dimensions for rhombic turning plates, so compatibility with holders is determined by geometry, clearance angle, tolerance class, fastening and thickness. With a 7° clearance angle and a plate thickness of 2.38 mm, the geometry supports stable seating in standard external holders and boring bars. The system concept includes the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, enabling repeatable set-ups and predictable tool life across batches. Process reliability and chip control in finishing tasks A single-sided chipbreaker paired with the cermet grade gives controlled chip formation in continuous cuts, which supports consistent surface quality and reliable downstream handling. The uncoated cermet substrate resists edge deformation at typical finishing parameters, while the thin plate design promotes minimal tool overhang and improved stiffness in light to medium-duty turning. These characteristics make the insert a practical choice for job shops and production lines focused on repeatable finishes rather than heavy interrupted cuts. Practical recommendations for application and material selection Select this insert where fine surface finish and low cutting forces are primary goals, especially for external or internal finishing of steel components. The geometry and grade perform best with small feed and depth settings, producing the intended surface integrity without aggressive cutting. For integration into existing tooling, verify seat form, fastening type and tolerance class to ensure full ISO compatibility and optimal clamping conditions. Choose the Tungaloy NS9530 finishing insert for predictable surface quality and streamlined turning set-ups — contact Metav Werkzeuge for tailored specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998434 Manufacturer SKU: TUN6998434 Designation: CCMT060204 NS9530 Facts Thickness: 2.38 mm Corner radius: 0.4 mm Insert angle: 80° Clearance angle: 7° Size: 06 Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Shape: rhombic Cutting material: uncoated cermet Grade: NS9530 (finishing for steel) Chipbreaker: single-sided Application: turning (external and internal) System components: insert, holder/boring bar, shim/clamp set, replacement screws Standard: ISO-conforming insert dimensions FAQ What machining tasks is this insert best suited for? The CCMT060204 NS9530 Tungaloy insert is optimised for finishing operations on steel, favouring continuous cuts and small depths of cut to achieve high surface quality. Which material does the NS9530 grade target? NS9530 is a finishing grade for steel; the uncoated cermet substrate is formulated for a sharp edge and low cutting forces when turning steel components. How does the insert ensure compatibility with existing toolholders? Compatibility depends on the ISO rhombic form, clearance angle, tolerance class, fastening and plate thickness; matching these parameters ensures proper seating and repeatable clamping. What advantages does the 0.4 mm corner radius offer? A 0.4 mm corner radius produces finer surface finishes and lower cutting forces in finishing passes, improving dimensional consistency for precision turned parts. Is this insert suitable for interrupted cuts or heavy roughing? The CCMT060204 NS9530 insert is a finishing solution optimised for continuous cuts and small depths of cut; it is not intended as a heavy-roughing or highly interrupted-cut tool. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet grade NS9530 and a 0.4 mm corner radius to achieve consistent finishing results on steel; order the insert directly via Metav Werkzeuge or consult the team for application guidance. CCMT060204 NS9530 Tungaloy turning insert — ISO CCMT finishing grade, 0.4 mm radius CCMT060204 NS9530 Tungaloy turning insert is an ISO rhombic finishing insert intended for external and internal turning, optimised for continuous cuts and high surface quality Uncoated cermet for superior finish Sharp cutting edge for low cutting forces 0.4 mm corner radius for fine profiles ISO CCMT form with hole for secure clamping High-quality finishing with an uncoated cermet grade The insert uses an uncoated cermet grade NS9530, developed for finishing of steel. This specification provides a sharp cutting edge that reduces cutting forces and supports small depths of cut while producing an improved surface texture. In practice, the combination of cermet substrate and a fine corner radius delivers a predictable chip formation in continuous-feed conditions and helps meet tight surface-roughness requirements. The grade is intended for finishing passes rather than heavy roughing, and its low tendency to built-up edge makes it suitable where consistent part appearance matters. Reliable compatibility and clamping for predictable process results Designed as an ISO-format turning insert in the CCMT profile, the geometry is compatible with standard CCMT holders when matched by form, clearance angle and thickness. The insert features a cylindrical locating hole with a single-sided countersink (40°–60°) that supports secure and repeatable clamping. The specified 7° clearance angle and the ISO geometry ensure stable seating and repeatability in production, which contributes to process reliability and consistent tool life across batches. Where toolholder matching is required, holders and clamping kits should be verified for CCMT060204 dimensions and tolerance class. Practical selection and handling for turning operations For external and internal turning where a fine surface is required, choose the one-sided chipbreaker and the 0.4 mm corner radius to balance edge strength with profile accuracy. The plate thickness of 2.38 mm and the CCMT06 size deliver a compact geometry that performs well at small feeds and finishing depths. Inserts of this type are best applied in steady, continuous-cut conditions; intermittent cutting or heavy interrupted cuts accelerate wear. Metav Werkzeuge can advise on the optimal combination of holder, clamping set and cutting parameters to match the grade NS9530 to specific steels and machining strategies. Contact Metav Werkzeuge for tailored application advice or to order the CCMT060204 NS9530 Tungaloy turning insert; reach the technical team at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 for swift support and delivery options Technical Data Article number: 6998615 Manufacturer SKU: TUN6998615 SKU: 6998615-Tungaloy Model series: ISO turning insert series Designation: CCMT060204 NS9530 Tungaloy turning insert Facts Corner radius: 0.4 mm Insert thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size: 06 Special features Schneidstofftyp: uncoated cermet (NS9530) Plate form: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning FAQ What materials is this insert intended for? This CCMT060204 NS9530 Tungaloy turning insert is specified as a finishing grade for steel and is optimised for continuous cutting where high surface quality is required. Is the insert compatible with standard CCMT holders? Yes, the insert follows the ISO CCMT geometry; compatibility depends on matching form, clearance angle, thickness and clamping style for secure seating. Which cutting conditions suit the NS9530 grade best? NS9530 performs best in finishing passes with small depths of cut and continuous feed; the uncoated cermet resists built-up edge and delivers a fine surface finish in steady-state cutting. Can this insert be used for internal turning as well as external turning? The ISO rhombic form and the CCMT06 size make the insert suitable for both external and internal turning when appropriate holders and tool overhang are selected. What does the hole style mean for clamping and repeatability? The cylindrical locating hole with a single-sided countersink (40°–60°) supports precise positioning and reliable clamping, improving repeatability across inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product is described both as manufactured from cemented carbide and as an uncoated cermet grade (NS9530). These are different cutting-material classifications; please verify the correct material specification before publishing, as such discrepancies can lead to confusion among users, misrepresentation of the product's actual properties, and potential issues with performance expectations or compatibility in specific applications where precise material identification is critical for operational success and safety. Ensuring accurate and consistent material descriptions is essential for maintaining trust, avoiding misunderstandings, and supporting informed decision-making by customers or stakeholders relying on the provided information.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade geometry and an uncoated cermet cutting material that deliver low cutting forces and an improved surface finish; the 0.4 mm corner radius and sharp edge ensure consistent results on continuous cuts. Order the CCMT060204 NS9530 insert directly from Metav Werkzeuge or consult our specialists for application guidance. CCMT060204 NS9530 CCMT ISO turning insert by Tungaloy (finishing for steel) A CCMT060204 NS9530 insert designed for finishing steel turning operations with rhombic ISO geometry, a 7° relief and a 0.4 mm corner radius for fine surface quality. ISO CCMT060204 rhombic insert NS9530 uncoated cermet finishing grade Sharp edge for high surface finish Cylindrical hole with one-sided countersink Consistent finishing performance for steel turning The insert is engineered as a finishing grade, optimised for continuous cuts and small depths of cut to produce a superior surface finish on steel workpieces. The combination of a sharp cutting edge and the uncoated cermet grade reduces cutting forces and vibration during light turning, which translates into more predictable tool life and fewer reworks. Where surface quality is the primary objective, this geometry and material pairing provide a measurable improvement in part-to-part consistency without demanding aggressive cutting parameters. Geometry and system compatibility for secure clamping The design follows ISO conventions, so compatibility with toolholders is governed by form, free angle, tolerance class, clamping method, size and thickness. The rhombic shape with an included angle of 80° and a 7° relief permits stable seat and positive engagement in common turning holders. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures reliable fastening with the correct screw and shim combination. Specifying the correct holder and clamping kit is essential to exploit the insert’s accuracy and repeatability. Material behaviour and cutting advantages of the grade The NS9530 uncoated cermet grade offers a fine, sharp cutting edge that excels in producing high-quality finishes on steel. Cermet grades typically combine ceramic hardness with metallic toughness, giving an edge that resists wear in continuous, light-cut applications while keeping cutting forces low. This results in less heat generation at the cutting zone and a smoother workpiece surface; the insert is therefore particularly well suited to finish turning where dimensional tolerance and appearance are critical. Choosing the right chipbreaker and assembling the system This insert features a single-sided chipbreaker, which aids chip control in many finishing operations; select a chipbreaker and grade matched to the workpiece material and the intended feed rate for optimal results. A complete system comprises the ISO insert, the appropriate external holder or boring bar, a shim/underplate and the correct fastening screw set. When assembling, ensure the 2.38 mm plate thickness and the 06 size are compatible with the chosen holder to maintain clamping stability and process security. For precision finishing in steel turning, request application guidance for the Tungaloy CCMT060204 NS9530 insert from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6945213-Tungaloy Manufacturer item number: 6945213 Manufacturer SKU: TUN6945213 Label: CCMT060204 NS9530 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Insert thickness: 2.38 mm Free angle: 7° Included angle: 80° Size: 06 Special features Shape: rhombic Grade: NS9530 uncoated cermet Chipbreaker: single-sided Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Application: turning Model series: ISO turning insert series Material: Hartmetall FAQ What materials is this insert best suited for? The CCMT060204 NS9530 Tungaloy insert is a finishing grade optimised for steel; it performs best on continuous cuts and small depths of cut where surface finish is critical. How does the uncoated cermet grade influence performance? The NS9530 uncoated cermet provides a very sharp cutting edge with low cutting forces, improving surface quality and reducing vibration during finishing operations. Which holder characteristics determine compatibility with this insert? Compatibility depends on the insert form, free angle, tolerance class, clamping method, size and thickness; matching these parameters ensures secure seating and repeatable results. What practical effect does the single-sided chipbreaker have? A single-sided chipbreaker helps control chip formation and evacuation in finishing feeds, improving surface quality and reducing the risk of built-up edge on steel. Which dimensions should be checked before specifying the insert? Confirm the corner radius (0.4 mm), insert thickness (2.38 mm), free angle (7°), included angle (80°) and the hole/countersink style to ensure fit with the selected holder and fastening hardware. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Efficient finishing with low cutting forces, a 0.4 mm nose radius and an uncoated cermet grade combine to deliver superior surface quality and predictable tool life; order the insert via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CCMT 060204 NS9530 Tungaloy indexable turning insert — uncoated cermet, 0.4 mm radius The CCMT060204 NS9530 is an ISO-conforming rhombic indexable insert for external and internal turning, optimised for fine finishing of steel components. ISO rhombic insert CCMT 06 size Uncoated cermet for fine finishing 0.4 mm nose radius for precise profiles Cylindrical hole with countersink 40°–60° High-precision finishing for steel components The CCMT060204 grade NS9530 is designed as a fine finishing solution for steel where a sharp cutting edge and low cutting forces are decisive. The uncoated cermet cutting material yields an improved surface quality on continuous cuts and when using small depths of cut; this results in fewer secondary operations and less rework. The small 0.4 mm nose radius enables precise profile reproduction while maintaining a stable cutting edge, so dimensional accuracy and surface integrity can be achieved in one pass. For machining strategies that prioritise finish over heavy metal removal, this grade offers predictable performance and consistent results. Integration and compatibility with common turning systems Compatibility between the insert and the holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic CCMT geometry and the 7° clearance angle make the insert suitable for many standard external holders and boring bars; the system typically comprises an ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and repeatable seating. When selecting a holder, match the CCMT06 designation, thickness 2.38 mm and hole style to guarantee correct seating and cutting geometry. Operational advantages and handling in production Operational benefits include reduced cutting forces, reliable chip formation and improved surface finish, leading to lower cycle times for finishing operations and less time spent on manual polishing. The one-sided chipbreaker supports stable chip control in continuous cuts, reducing risk of built-up edge and tool chatter. Because the grade is uncoated, attention to cutting speeds, feeds and coolant strategy will extend edge life; the result is an economical solution for series production where consistent finish and repeatability matter. Tool changes and inventory management are simplified by adhering to ISO designations and using compatible clamping kits. Contact Metav Werkzeuge for application guidance on the Tungaloy CCMT060204 NS9530 insert and to arrange a compatibility check with existing holders; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998425-Tungaloy Manufacturer article number: 6998425 Manufacturer SKU: TUN6998425 Model series: ISO indexable turning inserts Label: CCMT060204 NS9530 Tungaloy-Wendeplatte Numbers / Core technical data Size: 06 ISO code: 060204 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Design / Special features Rhombic insert shape (CCMT) Uncoated cermet cutting material, grade NS9530 One-sided chipbreaker Application: external and internal turning of steel Compatible with standard ISO CCMT holders; requires shim/clamp set and screws FAQ What materials is this insert suited for? The CCMT060204 NS9530 grade is optimised for machining steel, delivering a high surface finish during continuous cutting and small depths of cut. Can the insert be used for internal turning as well as external turning? Yes; the rhombic CCMT geometry and ISO sizing make the insert suitable for both external and internal turning when paired with the appropriate boring bar or holder. How does the chip control perform with this grade? The one-sided chipbreaker and the sharp cermet cutting edge provide stable chip formation in continuous cuts, improving process security and surface integrity. What must be considered when choosing a holder? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness—match the CCMT06 size, 2.38 mm thickness and hole style to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
The combination of a cermet finishing grade, a sharp cutting edge and a finely defined 0.4 mm nose radius delivers consistent surface quality and low cutting forces for predictable production. Order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. CCMT 060204 NS9530 Tungaloy Turning Insert for Finishing – Cermet, 0.4 mm Radius The CCMT060204 NS9530 is an ISO‑standard indexable turning insert engineered for finishing operations in turning, providing a sharp cutting edge and optimised chip control for fine surface finishes. Cermet finishing grade NS9530 Sharp cutting edge for low cutting forces 0.4 mm nose radius for superior surface finish ISO CCMT 060204 form with 7° clearance Consistent finishing performance with cermet chemistry The insert is made from uncoated cermet, a material engineered for low built-up edge and excellent surface finish when machining steel. Cermet combines the wear resistance of hard materials with edge toughness that keeps cutting forces low during continuous cuts. This results in steadier spindle loads and reduced need for rework. The finishing grade is especially effective for small depths of cut and produces the mirror-like finishes often required in precision components. The chemistry and microstructure of the grade promote stable flank wear progression, extending usable life under the recommended cutting conditions. Accurate geometry for predictable results and easy setup With an ISO rhombic CCMT form, a 0.4 mm nose radius and a 7° clearance angle, the geometry ensures repeatable contact conditions and controlled chip formation. The insert thickness of 2.38 mm and the 80° main cutting angle support secure clamping and correct seating in compatible holders. The insert includes a central mounting hole with a cylindrical bore and a one‑sided countersink (40°–60°), simplifying fixation and alignment. Because compatibility depends on form, clearance, tolerance class, mounting and size, selection of the correct holder and tightening torque ensures optimal performance and repeatable tool life. Practical advantages in daily production and recommended use The finishing grade is designed for continuous cutting and small feeds, where a sharp edge and low cutting forces matter most. The single‑sided chipbreaker promotes consistent chip control for finishing passes on steel, reducing the risk of surface marks and improving dimensional stability. For setup, choose an appropriate external holder or boring bar specified for CCMT inserts and set cutting parameters conservatively at first; the combination of grade and geometry allows fine tuning towards higher productivity while preserving surface quality. The insert is suitable for both external and internal turning where fine finishes and tight tolerances are required. For high‑quality finishing on steel, request application support for the Tungaloy NS9530 from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Manufacturer article number: 6998429 Manufacturer SKU: TUN6998429 SKU: 6998429-Tungaloy Label: CCMT060204 NS9530 Tungaloy-Wendeplatte Series: ISO‑Drehwendeschneidplatten Facts Nose radius: 0.4 mm Thickness: 2.38 mm Clearance angle: 7° Main cutting angle: 80° Form size: 06 Special features Grade: NS9530 finishing grade Substrate: uncoated cermet Chipbreaker: one‑sided Mounting: with hole; cylindrical hole + one‑sided countersink (40°–60°) Plate form: rhombic (CCMT) Typical use: external and internal turning on steel FAQ What materials is this insert suitable for? The CCMT060204 NS9530 insert is formulated as a finishing grade for steel and is optimised for continuous cuts and small depths of cut. Can the insert be used in internal turning operations? Yes, the geometry and form of the CCMT060204 NS9530 are suitable for both external and internal turning when used with the appropriate holder. What is the nose radius and why does it matter? The insert has a 0.4 mm nose radius; this small radius helps achieve fine surface finish and tight dimensional control during finishing passes. Does this insert include a chipbreaker? Yes, the CCMT060204 NS9530 is supplied with a one‑sided chipbreaker to support consistent chip formation in finishing applications. Which SKU or article number identifies this product? The product is listed under manufacturer article number 6998429 and SKU 6998429‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Take advantage of the precise finishing performance and low cutting forces of this ISO-format insert, combined with clear holder compatibility criteria and a stable single-sided chipbreaker for continuous turning of steel components. Order original Tungaloy inserts or contact Metav Werkzeuge for matching advice. CCMT060204 NS9530 Tungaloy indexable insert for turning — uncoated cermet, 7° clearance, 0.4 mm corner radius The CCMT060204 NS9530 Tungaloy is an ISO-format indexable insert engineered for external and internal turning, offering a rhombic geometry and a single-sided chipbreaker for fine finishing of steel components Uncoated NS9530 cermet for fine finishing Rhombic ISO insert, 7° clearance angle 0.4 mm corner radius for precise contours Single-sided chipbreaker, continuous cutting High-precision finishing with reduced cutting forces The insert’s uncoated cermet (NS9530) cutting material and a sharp cutting edge deliver a consistently smooth surface finish on steel while keeping cutting forces low. For applications that demand fine tolerances and excellent surface quality, the combination of cermet chemistry and a fine corner radius enables reliable finishing on continuous cuts and small depth-of-cut operations. This translates into fewer rework steps and a more stable machining process. Clear criteria for holder compatibility and secure clamping Compatibility with tool holders is determined by geometry and mounting parameters rather than brand alone. The ISO-format shape, rhombic outline, 7° clearance angle, tolerance class, size 06, and thickness 2.38 mm must match the chosen outer holder or boring bar. The cylindrical hole with a single-side countersink (40°–60°) ensures accurate seating and repeatable clamping; correct matching minimises vibration and protects the cutting edge from premature chipping, improving process reliability. Geometry engineered for consistent chip control and surface quality The single-sided chipbreaker is optimised for continuous cutting in finishing applications, helping to form short, controllable chips and maintain a stable cut even at modest feed rates. The 0.4 mm corner radius supports defined contouring and edge strength without sacrificing the ability to achieve a fine finish. Where continuous metal removal is required, this geometry reduces the likelihood of built-up edge and supports predictable tool behaviour. Practical application guidance to improve productivity For turning of steel with small depths of cut and continuous cuts, the insert provides a balance between edge sharpness and robustness. The ISO designation CCMT060204 describes the form, size and corner radius, which aids correct selection of matching holders. Selecting the appropriate chipbreaker and ensuring the holder conforms to the stated geometry and tolerance classes will result in stable cutting conditions and consistent part quality, supporting faster set-up and fewer interruptions. Contact Metav Werkzeuge for compatibility checks and to request original Tungaloy inserts, quoting SKU 6998419-Tungaloy for precise technical matching Technical data Article number: 6998419 SKU: 6998419-Tungaloy Manufacturer SKU: TUN6998419 ISO designation: CCMT060204 Model series: ISO turning indexable inserts Application: Turning Facts Size: 06 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.4 mm Insert angle: 80° Special features Uncoated cermet cutting material (NS9530) Rhombic insert form Single-sided chipbreaker Cylindrical hole + single-side countersink (40°–60°) Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? This insert is optimised for machining steel; the NS9530 uncoated cermet grade is designed for finishing steel with low cutting forces and high surface quality. How does the chipbreaker affect performance? The single-sided chipbreaker on the CCMT060204 insert promotes short, controllable chips during continuous cuts and supports stable surface finish with reduced risk of built-up edge. Which holder features are critical for compatibility? Holder compatibility depends on the ISO form, 7° clearance angle, size 06, thickness 2.38 mm, fastening method and tolerance class; matching these parameters ensures correct seating and repeatable clamping. Is the corner radius suitable for profile work? The 0.4 mm corner radius balances contour definition and edge strength, making it suitable for precise profiles and fine finishing operations. What is the correct ISO reference to order replacements? Order under the ISO designation CCMT060204 and the manufacturer SKU 6998419-Tungaloy to ensure delivery of the original Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Misinformation: the product data contains conflicting material information — one entry lists "Hartmetall" while the cutting grade specifies an uncoated cermet (NS9530). This discrepancy raises concerns about the accuracy of the provided specifications, which could lead to confusion or errors in selecting the appropriate tool for specific applications. It is essential to cross-check and verify the tool substrate and coating details to ensure consistency and reliability in the product description. Any inaccuracies in the data could potentially impact customer trust and decision-making, so please address this issue thoroughly and confirm the correct material and grade information before publishing the final product details.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the field "material" is listed as "Hartmetall" while the cutting material type is "uncoated Cermet"; this discrepancy could lead to confusion or errors in product categorisation, inventory management, or customer selection processes, so it is essential to review and rectify the information to ensure accuracy and consistency across all relevant records; please provide corrected product data promptly to avoid potential issues in operations, supply chain management, or customer satisfaction, as maintaining precise and reliable data is critical for effective decision-making and seamless functionality within the system, particularly when dealing with technical specifications or industry standards.
CCMT 060204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, low cutting forces and straightforward holder compatibility for reliable turning results; order or request advice via Metav Werkzeuge to integrate this grade into production quickly. CCMT060204 NS9530 Tungaloy indexable turning insert — rhombic 80° geometry, 0.4 mm corner radius A CCMT060204 NS9530 Tungaloy indexable insert designed for precision turning and finishing of steel, offering a sharp, uncoated cermet grade optimised for continuous cuts and small depths of cut. NS9530 cermet for fine finishing Sharp cutting edge with low forces Rhombic 80° plate, 0.4 mm radius Cylindrical hole with single-sided countersink Consistent fine finishing with a dedicated cermet grade The NS9530 grade is an uncoated cermet formulated for finishing applications on steel, delivering a sharp cutting edge that reduces cutting forces and improves surface quality. As a finishing grade, the insert is particularly suitable for continuous machining and small depth-of-cut operations; this translates to more consistent part surfaces and less rework. The material choice supports good dimensional control during long production runs and contributes to stable tool life when used within its intended cutting parameters. Geometry and clamping that ensure secure, repeatable performance The insert’s rhombic shape and 80° included angle, combined with a 0.4 mm corner radius, provide a predictable contact geometry that helps control cutting forces and vibration. The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match standard ISO-compatible holders; compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness, so the insert seats precisely and repeats accurately after indexing. The nominal thickness of 2.38 mm supports robust clamping without unnecessary overhang. Productivity gains through reduced cutting forces and surface quality Because the grade is optimised for finishing, operators can expect lower feed-induced forces and improved surface finishes compared with more general-purpose grades. The combination of a sharp cutting edge and the single-sided chipbreaker promotes controlled chip formation in continuous cuts, reducing the risk of built-up edge and minimising interruptions. In practical terms, this means more parts per tool life in finishing operations and fewer manual interventions, supporting higher process efficiency on CNC lathes. Practical selection and integration advice for workshops When integrating this insert into a tooling system, select a matching external holder or boring bar that accommodates the CCMT form, 7° relief angle and the ISO size. Choose the chipbreaker and grade combination that suits the workpiece material and machining stability; for finishing steel, the NS9530 uncoated cermet is the recommended option. For further guidance on holder compatibility, grade selection or recommended cutting data, Metav Werkzeuge’s technical consultants provide application-oriented advice to ensure optimal performance and quick availability of spare screws and clamping sets. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored technical advice and prompt supply — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6945206 Manufacturer SKU: TUN6945206 SKU: 6945206-Tungaloy Model series: ISO turning inserts Name: CCMT060204 NS9530 Tungaloy insert Facts Shape/format: CCMT / rhombic, size 06 Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 2.38 mm Included angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Cutting material: uncoated cermet (NS9530) Chipbreaker: single-sided Typical application: turning, finishing of steel System components: ISO insert plus matching outer holder or boring bar, shim/locking set and replacement screws FAQ What steels is this insert best suited for? The NS9530 grade is optimised for finishing steels; the CCMT060204 NS9530 Tungaloy insert gives a sharp edge and low cutting forces suited to continuous cuts and small depths of cut. How does the insert fit into existing holders? Compatibility is determined by form, relief angle, tolerance class, attachment method, size and thickness; the rhombic CCMT form and 7° relief angle align with ISO-standard holders designed for CCMT inserts. Is the insert coated? No, this is an uncoated cermet grade (NS9530), chosen to provide a very sharp cutting edge for high-quality finishing. What chip control can be expected? The single-sided chipbreaker promotes controlled chip formation in continuous finishing operations, reducing the likelihood of built-up edge and improving surface consistency. Which spare parts are typically required for setup? A matching external holder or boring bar, an appropriate shim/locking set and replacement screws are the standard complementary components for integrating this insert into a lathe tooling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com