CCMT 060204 T9225 Wendeplatten - Tungaloy
Reliable machining is achieved by the combination of the CVD‑coated T9225 grade and the ISO‑conforming CCMT060204 geometry, delivering toughness for medium to heavy steel turning and stable performance in lightly interrupted cuts. Order the CCMT060204 T9225 Tungaloy insert directly via Metav Werkzeuge or consult the Metav team for holder compatibility. CCMT 060204 T9225 Tungaloy indexable insert for turning A CCMT 060204 T9225 Tungaloy indexable insert for ISO‑standard turning, designed as a robust universal grade for medium to heavy steel machining. CVD-coated carbide grade T9225 ISO CCMT060204 geometry, rhombic form 7° relief angle with 0.4 mm corner radius One-sided chipbreaker; hole with countersink Consistent performance in medium to heavy steel turning The insert combines a CVD‑coated surface with a T9225 carbide substrate to balance wear resistance and toughness. The CVD coating reduces friction and improves resistance to built‑up edge, while the substrate provides the necessary fracture resistance for variable engagement conditions. This composition results in more predictable flank wear and longer intervals between indexing, which supports steady production and reduces unscheduled downtime. The robust construction makes the insert suitable for operations where stability and repeatability are pivotal. Straightforward integration with ISO tooling systems Manufactured to the ISO CCMT060204 specification, the rhombic form and standard dimensions ensure compatibility with a wide range of external holders and boring bars. The 7° relief angle and the plate thickness of 2.38 mm determine seating and clamping behaviour; the central cylindrical hole with single‑side countersink (40°–60°) secures repeatable positioning and torque transmission. These defined interfaces simplify tool selection: matching holder form, tolerance class and clamping method ensures correct seat and stable cutting conditions without guesswork. Productivity and economy through stable cutting and reduced tool changes The one‑sided chipbreaker and the 0.4 mm corner radius are tailored to provide effective chip control and surface integrity during typical turning passes. Stable chip formation under the T9225 grade extends usable tool life in medium to heavy machining, which lowers tooling cost per part and reduces machine idle time for tool changes. The result is improved cycle reliability and an attractive cost‑benefit balance for batch and serial production where changed cutting forces are common. Application guidance and recommended uses Intended primarily for external and internal turning, the insert is most effective when paired with a chipbreaker and grade selected for the workpiece material and machine stability. The CCMT shape is versatile for profiling and medium‑depth finishing, while the robust grade supports short interruptions and variable cut entry. For less stable setups, favour conservative cutting data and monitor edge condition; for stable, rigid setups the combination of T9225 and the chipbreaker supports higher metal removal rates. Selection of holder and clamping components should follow the ISO form and tolerance to maintain secure seating and repeatability. For optimal results with the Tungaloy CVD‑coated T9225 grade, contact Metav Werkzeuge for compatibility advice and to order the CCMT060204 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781477-Tungaloy Manufacturer SKU: TUN6781477 Manufacturer article number: 6781477 Facts Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 2.38 mm Size: 06 Included angle: 80° Special features CVD-coated carbide (T9225) Rhombic plate form CCMT (ISO CCMT060204) One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Rhombic size 06, thickness 2.38 mm Intended use: turning FAQ Is this insert suitable for heavy roughing operations? The CCMT060204 T9225 insert is a robust universal grade designed for medium to heavy steel turning; for the heaviest roughing, assessment of machine rigidity and cutting parameters is recommended. What does the T9225 designation mean for wear behaviour? T9225 identifies a CVD‑coated carbide grade offering a balance of wear resistance and toughness, which gives reliable performance under variable cutting conditions. Will the insert fit existing ISO CCMT holders? The insert follows the ISO CCMT060204 geometry; compatibility depends on holder form, relief angle, tolerance class and clamping method — the Metav Werkzeuge team can advise on matching holders. How does the one-sided chipbreaker affect surface finish? The one-sided chipbreaker is tuned to promote controlled chip formation and can support consistent surface quality when cutting data is set according to material and stability. What are the key dimensions to check when replacing an insert? Verify the ISO designation (CCMT060204), corner radius (0.4 mm), plate thickness (2.38 mm) and the presence of the cylindrical hole with countersink to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH120 Wendeplatten - Tungaloy
Combine the wear resistance of a PVD-coated carbide grade with a 0.8 mm corner radius for consistent, process-secure turning results; order the CCMT060208 AH120 Tungaloy turning insert directly via Metav Werkzeuge or consult our advisors for application guidance. CCMT060208 AH120 Tungaloy turning insert — rhombic 06 for external and internal turning, PVD-coated carbide A CCMT060208 AH120 Tungaloy turning insert designed for external and internal turning, featuring a rhombic 06 geometry, single-sided chipbreaker and a cylindrical hole with one-sided countersink for stable clamping. PVD-coated carbide grade AH120 0.8 mm corner radius Rhombic 06 form, 2.38 mm thickness Single-sided chipbreaker, cylindrical hole Consistent cutting performance and material properties for productive turning The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge stability that supports repeatable performance in turning operations. The coating increases hardness and thermal resistance, reducing flank wear and delaying edge breakdown under interrupted cuts. The combination of a sharp effective cutting edge and robust substrate makes the insert suitable when both finish quality and process security are required. Compatibility with ISO clamping systems ensures the insert can be integrated into standard holders when form, clearance angle, tolerance class and thickness are matched. Improved chip control and reliable surface results with a compact geometry The single-sided chipbreaker and rhombic geometry facilitate controlled chip formation across a range of feed rates, helping to maintain a stable cutting load and consistent surface finish. A 0.8 mm corner radius gives a favourable compromise between edge strength and finishing capability: small enough to achieve fine surface quality, yet large enough to withstand moderate interruptions and tool deflection. With an effective clearance angle of 7° and an insert angle of 80°, this geometry supports both external and internal turning tasks while contributing to predictable tool life and process efficiency. Practical compatibility guidance and system considerations for secure clamping Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the ISO-designated format simplifies selection within established toolholder systems. The insert is supplied with a cylindrical hole plus one-sided countersink (40°–60°) to match common clamping screws and ensure axial location and repeatable seating. Typical system components include the ISO indexable insert, a suitable external holder or boring bar, underlay/clamping set and replacement screws. For applications where chipbreaker style, AH120 grade or insert geometry require fine tuning, consultation on holder match and cutting data is recommended to secure optimal results. Contact Metav Werkzeuge for availability, application advice and to discuss the CCMT060208 AH120 Tungaloy turning insert supply and compatibility options Technical data Article number: 6852435 Manufacturer SKU: TUN6852435 Model series: ISO turning indexable inserts Material: PVD-coated carbide Designation: CCMT060208 AH120 Facts Corner radius: 0.8 mm Thickness: 2.38 mm Insert size: 06 Clearance angle: 7° Insert angle: 80° ISO code: 060208 Special features Rhombic shape (06) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) PVD coating, grade AH120 For external and internal turning Compatible with ISO holders (form, clearance angle, tolerance class, fastening, size, thickness) FAQ What materials is this insert best suited for? The CCMT060208 AH120 Tungaloy turning insert is optimised for a broad range of materials where a sharp cutting edge and process security are required; the PVD-coated carbide AH120 provides good wear resistance across many steels and common alloyed materials. How does the chipbreaker affect performance? The single-sided chipbreaker on the CCMT060208 AH120 Tungaloy turning insert promotes controlled chip formation and reduces the risk of long, stringy chips, improving machining stability and surface quality. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle (7°), tolerance class, fastening system, insert size (06) and thickness (2.38 mm); the CCMT060208 AH120 Tungaloy turning insert is designed for standard ISO-format holders that match these parameters. What clamping features ensure repeatable seating? The CCMT060208 AH120 Tungaloy turning insert includes a cylindrical hole with a one-sided countersink (40°–60°) to ensure axial location and secure clamping with standard screws, aiding repeatability across tool changes. Can this insert handle interrupted cuts? Thanks to the robust AH120 grade and a 0.8 mm corner radius, the CCMT060208 AH120 Tungaloy turning insert offers enhanced resistance to edge chipping in applications with moderate interruptions, supporting reliable production performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant PVD-coated carbide grade, a precise 0.8 mm corner radius and a pragmatic rhombic geometry for dependable turning productivity; order the insert directly via Metav Werkzeuge or consult our technical team for application support. CCMT 060208 AH120 CCMT indexable turning insert for Turning — Tungaloy An CCMT060208 AH120 indexable insert designed for general external and internal turning, offering a robust cutting edge and consistent process behaviour in production environments PVD-coated carbide grade AH120 Sharp cutting edge for process security 0.8 mm corner radius for versatile turning Rhombic CCMT form with hole and countersink High-performance cutting with predictable results The insert delivers predictable machining outcomes through its PVD-coated carbide composition, optimised for wear resistance and edge stability. The selected grade AH120 combines a tough substrate with a fine coating that reduces flank wear and resists chipping under varying cutting conditions. For the operator, this translates into longer tool life and fewer interruptions for insert changes, which supports steady production throughput and reduces scrap. The geometry of the rhombic plate supports both external and internal operations while the one-sided chipbreaker promotes manageable chip formation. Simple integration into standard tool systems Compatibility with common holders is ensured by the ISO-based CCMT format and the defined geometry parameters. The plate’s form, 7° free clearance, tolerance class, fixation method and thickness determine fitment; the central cylindrical hole with a single-sided countersink (40°–60°) simplifies secure clamping in many standard toolholders. Because the insert follows ISO dimensioning, it fits a wide range of tool systems, allowing quick replacement and easing tool inventory management. The result is reduced setup time and straightforward interchangeability across machines. Geometry and grade tailored for everyday productivity The 0.8 mm corner radius offers a balance between edge strength and achievable surface finish, suitable for a variety of steels and alloyed materials when appropriate cutting data are used. The 80° included angle of the rhombic shape provides favourable cutting forces for stable turning, while the one-sided chipbreaker guides chips away from the workpiece to protect the machined surface. For manufacturers seeking consistent component quality and repeatable cycle times, the combination of geometry and AH120 grade supports process security and cost-efficient machining. For guaranteed process security with Tungaloy grade AH120, contact Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and recommended cutting data Technical data Article number: 6818322 Manufacturer SKU: TUN6818322 SKU: 6818322-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CCMT060208 Grade: AH120 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Included angle: 80° Free clearance: 7° Plate thickness: 2.38 mm Size designation: 06 Special features PVD-coated carbide Rhombic CCMT plate form Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Intended application: Turning Compatibility determined by form, clearance, tolerance, fixation, size and thickness FAQ What materials can this insert machine reliably? The Tungaloy CCMT060208 AH120 insert is designed for a broad range of turning tasks; the AH120 grade performs well on many steels and alloyed materials when cutting data are adjusted for the workpiece. How does the PVD coating benefit tool life? A PVD-coated carbide provides a hard, wear-resistant surface that reduces flank wear and improves edge retention, extending the service life of the insert under typical production conditions. Which holders are compatible with this CCMT format? Holders that accept ISO CCMT plates and accommodate a central clamping screw with a cylindrical hole and countersink are compatible; the plate’s form, free clearance and thickness determine the exact fit. Can the insert be used for internal turning? Yes, the rhombic geometry and modest corner radius allow use in internal operations, provided the selected holder and tool overhang meet stability requirements for the application. What advantage does the 0.8 mm radius offer? A 0.8 mm corner radius strikes a balance between a robust cutting edge and good surface finish, making it versatile for general turning tasks where both longevity and component quality are important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade engineered for stainless steel, paired with a 0.8 mm corner radius and 7° clearance for steady medium‑duty turning; order directly via Metav Werkzeuge or consult our specialists for tailored selection. CCMT 060208 AH6225 — CCMT indexable turning insert for turning by Tungaloy CCMT060208 AH6225 is an ISO‑standard indexable insert designed for external and internal turning, offering a balanced cutting edge for variable machining conditions. CCMT 060208 geometry for versatile turning PVD-coated carbide AH6225 for stainless steel 0.8 mm corner radius for consistent edge strength Cylindrical hole with countersink for secure clamping Consistent cutting performance for stainless steel The PVD‑coated carbide composition of the insert and the AH6225 grade deliver a combination of a sharp yet stable cutting edge suited to medium machining. This balance reduces the frequency of insert changes and supports predictable cycle times in batch production. The design addresses common challenges when machining stainless steel, such as built‑up edge and variable material batches, by favouring a coating and substrate pairing that maintain edge integrity under fluctuating loads. The result is improved process reliability and reduced downtime. Predictable seating and secure clamping for repeatable results The rhombic CCMT form (size 06) is ISO‑standardised, which makes holder compatibility straightforward when the holder matches form, clearance and tolerance class. With a 7° clearance angle and a 2.38 mm plate thickness, seating is stable and vibration is minimised when the correct external holder or boring bar is used. The insert features a cylindrical hole with a single‑side countersink (40°–60°) to ensure secure clamping and repeatable positioning, supporting consistent radial location and surface finish across multiple re‑indexings. Edge geometry and chip control that aid surface quality A 0.8 mm corner radius provides a compromise between edge strength and surface finish, reducing the risk of chipping while still enabling fine finishes in many turning tasks. The single‑sided chipbreaker design supports reliable chip formation and evacuation during standard feeds and depths of cut for medium applications. Where process stability and chip control are critical, this configuration helps avoid interference with coolant flow and reduces the risk of chip entanglement, contributing to safer, more efficient shopfloor operation. Application guidance and system integration The insert is intended for both external and internal turning; selection of the correct chipbreaker and grade should be aligned with workpiece material, machining method and machine stability. Typical system assembly includes the ISO indexable insert, a compatible external holder or boring bar, a pad/clamping set and replacement screws. Because compatibility depends on form, clearance, tolerance class, fastening and thickness, matching the insert to the holder and application ensures optimal performance and longer service intervals. For dependable medium‑duty turning of stainless steel choose the Tungaloy AH6225 CCMT 060208 insert — contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947656 SKU: 6947656-Tungaloy Manufacturer SKU: TUN6947656 Facts Corner radius: 0.8 mm Included angle: 80° Free angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features Material: carbide Grade/coating: AH6225 (PVD‑coated carbide) Plate shape: rhombic (CCMT) Chipbreaker: single‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) System: ISO indexable insert; compatibility by form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT060208 AH6225 Tungaloy indexable insert is formulated primarily for stainless steel and performs best under medium cutting conditions with appropriate chipbreaker selection. What does the AH6225 designation indicate? AH6225 denotes a PVD‑coated carbide grade developed for a wide range of stainless steel applications, balancing a sharp cutting edge with stable wear resistance. How is the insert clamped in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping; correct holder matching ensures repeatable seating and reduced vibration. Is the geometry suitable for both external and internal turning? Yes — the rhombic CCMT form and the plate dimensions make the insert appropriate for both external and internal turning when combined with a compatible holder or boring bar. What role does the 0.8 mm corner radius play? A 0.8 mm radius increases edge strength for medium cuts while still allowing good surface finish, helping to avoid chipping during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Benefit from a stable cutting edge, universal PVD-coated carbide and a precise 0.8 mm nose radius for consistent turning performance and reduced rework. Order the insert via Metav Werkzeuge or consult their specialists for cutting data and application support. CCMT060208 AH6225 Tungaloy ISO turning insert — PVD-coated carbide, 80° rhombic, 0.8 mm nose radius A CCMT060208 AH6225 indexable insert engineered for turning applications, optimised for stainless steels and medium-duty operations. PVD-coated carbide AH6225 80° rhombic form for stable support 0.8 mm nose radius for finishing and semi-finishing Cylindrical hole with 40°–60° countersink Stable cutting edge for variable stainless-steel tasks The combination of a PVD-coated surface and a robust carbide substrate provides a reliable cutting edge suited to the challenges of machining stainless steels. The selected grade offers a balance between sharpness and edge stability, reducing the tendency for built-up edge and minimising part scrap. As a result, cycle-time consistency improves and tool change intervals are more predictable, which supports process planning in mixed-batch production environments. Coating and grade that improve productivity and surface quality The AH6225 coating system is designed to resist adhesive wear and maintain a sharp geometry under fluctuating cutting conditions. This leads to measurable gains in surface finish and reduced need for secondary finishing. The one-sided chipbreaker helps control swarf formation during turning, simplifying chip evacuation and enhancing machine uptime. For operations where medium cutting depths and variable feed rates are common, this insert helps to keep scrap rates low and the overall process economical. Geometry and system compatibility for secure clamping and repeatability A rhombic 80° shape with a 0.8 mm corner radius delivers flexibility across external and internal turning tasks while preserving strength at the cutting edge. The insert is manufactured to ISO standard dimensions so compatibility with matching external holders, boring bars and clamping sets is ensured by form, relief angle, tolerance class, fixing method, size and thickness. The cylindrical hole with single-side countersink (40°–60°) provides secure seating and repeatable orientation, contributing to consistent part tolerances and straightforward tool change procedures. Contact Metav Werkzeuge for tailored cutting parameters, application advice and to request technical documentation for the Tungaloy CCMT060208 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6829051 SKU: 6829051-Tungaloy Manufacturer SKU: TUN6829051 Model series: ISO turning inserts Material: Carbide Core figures Corner radius: 0.8 mm Insert form angle: 80° Relief (free) angle: 7° Plate thickness: 2.38 mm Size: 06 Design and special features PVD-coated carbide grade AH6225 Rhombic insert shape, 80° One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Suitable for turning (external and internal) Universal use for stainless steels FAQ Which materials are best machined with this insert? The Tungaloy CCMT060208 AH6225 insert is formulated for stainless steels and performs reliably across a broad range of corrosion-resistant alloys and related materials. What advantages does the AH6225 grade provide compared with standard grades? AH6225 offers improved edge stability and wear resistance thanks to its PVD-coated carbide construction, reducing built-up edge and extending effective tool life in medium-duty turning. Is the insert compatible with ISO clamping systems and holders? Yes. The insert follows ISO dimensions and locational features so compatibility with matching external holders, boring bars and clamping kits is determined by form, relief angle, tolerance class, fixing and size. How does the chipbreaker affect machining performance? The one-sided chipbreaker facilitates controlled swarf formation and evacuation during turning, improving process reliability and reducing interruptions caused by chip entanglement. What seating and fixation does the insert require? This insert has a cylindrical hole with a single-side countersink (40°–60°) for secure seating and repeatable orientation in compatible tool holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade engineered for stainless steels, a sharp yet stable cutting edge, and precise ISO geometry for consistent turning performance. Order this insert directly via Metav Werkzeuge or consult the specialists for application-specific advice. CCMT060208 AH6225 indexable insert for turning — Tungaloy, PVD-coated, 0.8 mm radius CCMT060208 AH6225 is an ISO-format, rhombic indexable insert designed for external and internal turning operations where reliable performance on stainless steels is required. PVD-coated cemented carbide for wear resistance Universal grade optimised for stainless steels Rhombic 80° geometry with 0.8 mm radius Cylindrical hole with single-sided countersink Consistent productivity through optimised coating and substrate The combination of a PVD-coated surface and a hard cemented carbide substrate delivers a balance between wear resistance and edge stability under varying cutting conditions. This makes the insert particularly suitable for medium-duty turning where surface quality and tool life must be balanced. The AH6225 grade is formulated to support stable chip formation and to tolerate the work-hardening tendencies of many stainless steels, reducing unplanned tool changes and improving overall process efficiency. Precision geometry for repeatable, high-quality turning The rhombic 80° geometry paired with a 0.8 mm corner radius and a 7° clearance angle provides a controlled cutting action that helps achieve consistent surface finish and dimensional repeatability. Plate thickness 2.38 mm ensures secure clamping and stability during cutting. Explaining the geometry: the 80° lead allows robust engagement for roughing and finishing passes, while the modest corner radius balances edge strength with achievable surface finish, which is particularly relevant when working with stainless alloys prone to built-up edge. Easy integration and secure clamping for fast tool changes Compatibility with ISO toolholders is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure correct seating and reliable clamping. The single-sided chipbreaker design helps control chip flow for a range of cutting parameters, reducing the risk of entanglement and improving operator safety. As part of a complete system — insert, holder, shim and clamping screw — this format supports quick indexability and low downtime during production. For a reliable solution in stainless-steel turning, request the CCMT060208 AH6225 insert from Metav Werkzeuge or contact their technical advisors for tailored application recommendations and availability. Technical data Article number: 6829153 Manufacturer SKU: TUN6829153 SKU: 6829153-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Application: turning Core data Corner radius: 0.8 mm Plate angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features Grade: AH6225 Coating: PVD Plate shape: rhombic Hole: cylindrical with single-sided countersink (40°–60°) Chipbreaker: single-sided With hole for secure clamping FAQ What material is the insert optimised for? The CCMT060208 AH6225 insert is optimised for machining stainless steels, with a PVD-coated cemented carbide grade designed for stable cutting and good wear resistance. Which geometry and radius does this insert use? This indexable insert features a rhombic 80° geometry and a 0.8 mm corner radius, offering a compromise between edge strength and surface finish. Is the insert compatible with standard ISO toolholders? Compatibility is determined by form, clearance angle, tolerance, fixing, size and thickness; the CCMT060208 format matches ISO turning holders designed for this plate size. What chip control does the insert provide? The insert has a single-sided chipbreaker, which supports controlled chip formation across a range of cutting conditions. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole with single-sided countersink (40°–60°), ensuring correct seating and secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and a stable, sharp cutting edge for consistent medium-duty turning of stainless steels; the ISO rhombic form ensures simple interchangeability in standard holders. Order the CCMT 060208 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060208 AH6225 Tungaloy turning insert — PVD-coated carbide, 0.8 mm radius The CCMT 060208 AH6225 is an ISO-standard rhombic turning insert intended for external and internal turning; designed as a universal grade for stainless steels with a 7° clearance angle and a single-sided chipbreaker. ISO rhombic CCMT 060208 form PVD-coated AH6225 carbide for stainless steel 0.8 mm corner radius for chip control Cylindrical hole with single-side countersink Consistent machining performance for stainless-steel turning The PVD-coated AH6225 carbide grade was developed to deliver a sharp cutting edge while maintaining edge stability under varying conditions, making it well suited to machining stainless steels. The PVD layer improves wear resistance and helps maintain dimensional stability over multiple part runs, so the toolholder life and component surface finish remain predictable. For users moving between short runs and small-batch production, this combination reduces process variation and supports higher first-pass yield. Accurate fitment and dependable clamping for repeatable results Thanks to the ISO standard form and defined tolerances, the insert seats reliably in matching holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The rhombic geometry and the 7° relief angle facilitate both external and internal operations while the cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping and correct register. Choosing the correct clamping set and replacement screws minimises movement at the cutting edge and supports repeatable component tolerances. Controlled chip formation and better surface quality The single-sided chipbreaker and a 0.8 mm corner radius provide balanced chip control at moderate feeds, reducing the risk of built-up edge and erratic chips that can damage surfaces. A modest corner radius helps distribute cutting forces, lowering vibration and improving surface finish on challenging alloys. This predictable chip behaviour simplifies downstream operations and reduces cycle time variability, particularly when turning long or slender components that are sensitive to chatter. Selection guidance and workshop best practice Select a holder and underlay set that match the insert dimensions and tolerance to ensure optimal seat contact and clamping force. For medium-duty turning applications the PVD-coated carbide grade performs best with stable setups and consistent coolant application when machining stainless steels. Monitor flank wear and edge chipping rather than relying solely on running time; timely indexation preserves part quality and reduces scrap. For complex materials or unfamiliar geometries, consider matching the AH6225 grade with the appropriate feed and depth settings in a controlled trial before full production. For availability, technical matching or to place an order for the Tungaloy CCMT 060208 AH6225 insert, contact Metav Werkzeuge for prompt advice and local supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6828932 SKU: 6828932-Tungaloy Manufacturer SKU: TUN6828932 Designation: CCMT060208 AH6225 Core specifications Insert size: 06 ISO code: 060208 Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Plate thickness: 2.38 mm Features & applications Material: carbide Coating: PVD Grade: AH6225 — universal for stainless steels Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO rhombic form CCMT; for turning (external / internal) System requirement: matching holder, underlay/clamping set and replacement screws FAQ Is this insert compatible with standard ISO CCMT holders? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the CCMT 060208 AH6225 follows ISO dimensions and will fit holders specified for CCMT 060208 inserts when those criteria match. Which materials are suitable for this grade? The AH6225 PVD-coated carbide grade is designed as a universal solution for stainless steels, providing a balance of edge sharpness and stability for medium-duty turning operations. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, reducing the risk of entanglement and improving surface quality on turned parts. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius offers improved chip control and reduced tool vibration compared with a smaller radius, supporting better surface finish and longer edge life in many turning scenarios. Can the CCMT 060208 AH6225 be used for internal turning? Yes — the ISO rhombic form and the specified relief angle allow use in both external and internal turning, provided that the holder geometry and clamping are suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6225, a sharp and stable cutting edge, and ISO compatibility for reliable turning of stainless steel; order directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT 060208 AH6225 Turning insert (ISO CCMT) by Tungaloy — PVD carbide, 7° clearance A CCMT060208 AH6225 turning insert for external and internal turning, designed for consistent performance on stainless steel with a sharp, stable cutting edge PVD-coated carbide for extended tool life Sharp and stable cutting edge Compatible with ISO CCMT toolholders Single-sided chipbreaker for reliable chips Precision and productivity for demanding turning operations The CCMT060208 insert is an ISO‑standard indexable insert engineered to deliver repeatable results in general turning tasks. With a PVD coating and the AH6225 grade, the insert provides a balance of wear resistance and edge integrity that reduces downtime. The single-sided chipbreaker ensures consistent chip control, lowering the risk of built-up edge and tool change frequency. For production environments that prioritise throughput, this combination translates into longer tool life and fewer interruptions. Why the geometry matters: clearance, radius and chip control A defined clearance angle of 7° and a corner radius of 0.8 mm deliver predictable engagement with the workpiece, reducing vibration and improving surface finish. The rhombic shape and the single-sided chipbreaker are designed to direct chips away from the cutting zone; this improves process stability, particularly in interrupted cuts or variable feed conditions. Explaining the terms: a chipbreaker is a small groove or form on the insert face that controls how the metal breaks away, which in turn reduces cycle time and improves operator safety. Material compatibility and practical benefits on the shop floor The AH6225 grade is formulated as a universal option for stainless steel and is intended for medium finishing and medium turning conditions where a sharp yet robust cutting edge is required. In practice, this means fewer rejects, more consistent surface quality and less bench time for rework. Indexable inserts such as this reduce inventory complexity because a single grade can cover a range of stainless‑steel alloys and process conditions, supporting leaner tooling management and more predictable production planning. For secure and efficient turning of stainless steel, select the Tungaloy CCMT060208 AH6225 insert from Metav Werkzeuge — contact Metav Werkzeuge for tailored recommendations or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6947662 SKU: 6947662-Tungaloy Manufacturer SKU: TUN6947662 Model series: ISO turning indexable inserts Core technical data Corner radius: 0.8 mm Cutting angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Size: 06 Special features ISO designation: CCMT060208 Grade: AH6225 Coating: PVD Material: Carbide Chipbreaker: single-sided Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Plate form: rhombic Intended application: Turning Suitable for: stainless steel FAQ What materials is this insert best suited for? The CCMT060208 AH6225 insert is designed primarily for stainless steel; the AH6225 PVD‑coated carbide balance supports medium finishing and a range of stainless‑steel alloys. How does the AH6225 grade affect tool life? AH6225, as used on the Tungaloy CCMT060208, combines a wear‑resistant PVD coating with a tough substrate to extend tool life while maintaining a sharp cutting edge in mixed turning conditions. Can this insert be used for both external and internal turning? Yes, the ISO CCMT indexable geometry of this insert is suitable for both external and internal turning when paired with the correct holder and mounting specifications. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker on the insert controls chip formation to improve evacuation and process stability, which helps maintain surface quality and reduces the likelihood of chip re-folding. What mounting and holder compatibility should be checked? Compatibility depends on the holder’s pocket form, clearance, tolerance class, fastening and plate thickness; the CCMT060208 format conforms to ISO dimensions, so matching an ISO CCMT toolholder or boring bar is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6225 Wendeplatten - Tungaloy
Combining a durable PVD-coated carbide grade with a 0.8 mm nose radius and ISO 060208 compatibility, this insert delivers consistent performance for medium turning operations in stainless steels. Order the CCMT060208 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT060208 AH6225 Tungaloy indexable turning insert — PVD-coated carbide, 0.8 mm radius CCMT060208 AH6225 Tungaloy indexable turning insert designed for external and internal turning in demanding stainless-steel applications, offering a sharp yet stable cutting edge for medium machining. PVD-coated carbide AH6225 for stainless steels Rhombic CCMT form, ISO 060208 compatibility 0.8 mm nose radius for precise finishing Cylindrical hole with single-sided countersink Consistent performance for stainless-steel turning The PVD-coated carbide grade AH6225 is engineered as a universal solution for stainless steels, combining a sharp cutting edge with the toughness required for variable cutting conditions. This balance reduces tool changes and contributes to more predictable cycle times, which supports efficient shop-floor planning and lower machining costs per component. The single-sided chipbreaker helps direct chips reliably away from the cutting zone, improving machine uptime and reducing rework caused by poor chip control. Geometry and features that improve surface quality The rhombic CCMT geometry with ISO 060208 designation and a 0.8 mm nose radius is selected to deliver a favourable trade-off between strength and finish capability. A 7° clearance angle reduces rubbing at the flank while enabling stable contact during interrupted cuts, and the cylindrical hole plus single-sided countersink (40°–60°) ensures secure clamping in compatible holders. Together these details support a consistent surface finish and repeatable dimensional results in both external and internal turning operations. Workshop integration and handling for reliable machining Integration into an existing tooling system is straightforward when the holder matches the form, clearance angle, tolerance class, fastening arrangement, size and thickness of the insert. The insert thickness of 2.38 mm and size 06 align with many standard ISO holders; however, compatibility must be confirmed prior to assembly. The single-sided chipbreaker and the PVD coating assist in maintaining cutting-edge integrity during medium-duty passes, helping to extend tool life and reduce overall tooling consumption across production batches. Discuss the Tungaloy CCMT060208 AH6225 option with Metav Werkzeuge for application-specific advice; call +49 2822 7131930 or email info@metav-werkzeuge.com to check availability and compatibility Technical data Article number: 6903269 Manufacturer: Tungaloy Manufacturer SKU: TUN6903269 Model series: ISO turning inserts Material: Carbide Measurements Nose radius: 0.8 mm Thickness: 2.38 mm Clearance angle: 7° Insert size: 06 ISO code: 060208 Insert angle: 80° Design & special features PVD-coated carbide (AH6225) Rhombic CCMT form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Application: Turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT060208 AH6225 insert is designed primarily for stainless steels and performs reliably in medium cutting conditions thanks to its PVD-coated carbide grade. Which holder characteristics are required for correct fitting? Correct fitting requires a holder that matches the CCMT form, the 7° clearance angle, the insert size and thickness; the cylindrical hole with countersink is used for secure fastening. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert helps guide chips away from the cutting zone, supporting consistent chip control and reducing the risk of built-up edge in stainless-steel turning. Is the insert suitable for internal turning as well as external turning? Yes; the geometry and strength of this indexable insert make it suitable for both external and internal turning when installed in a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6235 Wendeplatten - Tungaloy
Reliable performance in external and internal turning is achieved by the combination of the PVD-coated AH6235 grade and the rhombic CCMT060208 geometry, delivering improved tool life and consistent surface quality; the 0.8 mm corner radius supports fine finishing and reduced rework. Order the inserts directly via Metav Werkzeuge or consult the advisors for holder compatibility and availability. CCMT 060208 AH6235 CCMT Turning Insert — Tungaloy PVD-coated Carbide The CCMT060208 AH6235 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a tougher PVD‑coated carbide grade for stainless steels and interrupted cuts. PVD-coated carbide for stainless steels Rhombic 06 geometry for versatile turning 0.8 mm corner radius for refined surfaces Single-sided chipbreaker with hole and countersink Consistent cutting performance for stainless steels and demanding jobs The combination of a PVD coating with a tougher AH6235 carbide substrate is tailored for machining stainless steels and operations with elevated breakout risk. The coating reduces adhesive wear and enhances thermal resistance, which in practice means longer intervals between indexings and fewer unexpected tool changes. By selecting the appropriate chipbreaker and grade for the workpiece and stability conditions, the machining process becomes more predictable, lowering scrap rates and improving overall throughput. Improved chip control and reduced edge failure in interrupted cuts The insert's single-sided chipbreaker and the option for a cylindrical hole with a one-sided countersink provide stable clamping and effective chip formation, particularly in interrupted or unstable cuts. Controlled chip flow reduces the likelihood of edge chipping and built-up edge formation; this results in a steadier surface finish and less manual intervention. For shops aiming to increase first-pass quality, these features translate to fewer downstream operations and a smoother production rhythm. Easy integration into ISO holders and clear fitment criteria Compliance with ISO plate geometry simplifies selection of a matching holder: compatibility is determined by shape, clearance angle (7°), tolerance class, fastening, size and thickness. The rhombic plate form (06) and a plate thickness of 2.38 mm ensure a compact yet robust seating; the 80° included angle suits a wide range of turning tasks. When choosing tooling, verify holder fitment against these parameters to guarantee secure clamping and repeatable positioning. The insert’s technical clarity facilitates straightforward stocking and tool management within production systems. For high‑reliability turning with Tungaloy’s AH6235 grade, contact Metav Werkzeuge for application guidance and immediate availability. Technical Data Article number: 6890158 SKU: 6890158-Tungaloy Manufacturer SKU: TUN6890158 Model series: ISO turning indexable inserts Core dimensions Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Plate thickness: 2.38 mm Size: 06 Materials & special features Material: carbide Coating/grade: AH6235 (PVD-coated) Shape: rhombic (CCMT) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning; suitable for stainless steels and interrupted cuts Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT060208 AH6235 insert is designed primarily for stainless steels and is recommended where tougher grades are needed for interrupted cuts or increased breakout risk. How does the AH6235 grade improve performance? The AH6235 PVD‑coated carbide offers enhanced adhesion resistance and thermal stability, which extends cutting life and reduces edge chipping during demanding turning operations. Which holders are compatible with this insert? Compatibility depends on the holder matching the CCMT geometry, clearance angle 7°, plate thickness 2.38 mm, size 06 and fastening method; confirm these parameters before assembly. Can this insert be used for internal as well as external turning? Yes, the rhombic CCMT form and 80° included angle make the insert suitable for both external and internal turning applications when the correct holder and setup are used. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker provides reliable chip formation and evacuation, reducing the risk of built-up edge and improving surface finish in unstable or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6235 Wendeplatten - Tungaloy
High toughness and a PVD-coated carbide grade deliver reliable cutting performance in stainless steels and interrupted cuts; the rhombic CCMT geometry with an 0.8 mm corner radius and 80° included angle ensures versatile finishing and stable roughing. Order the inserts directly via Metav Werkzeuge or consult our technical specialists for grade selection and application advice. CCMT 060208 AH6235 — ISO CCMT Turning Insert for Turning | Tungaloy The CCMT060208 AH6235 is an ISO rhombic indexable insert for external and internal turning, optimised for machining stainless steel and applications prone to interruption or increased risk of chipping. PVD-coated carbide grade AH6235 Optimised for stainless steel machining Rhombic CCMT 06 with 0.8 mm radius Cylindrical hole + single-sided countersink Robust coating and grade for consistent tool life The PVD-coated carbide composition of this grade combines surface hardness with a tough substrate to resist edge fracture. The coating reduces adhesive wear and improves heat resistance during sustained cutting, while the base material absorbs shock in interrupted cuts. For workshops seeking predictable tool changes and fewer scrap parts, this mix of surface protection and substrate toughness translates into longer productive intervals and steadier component quality. Geometry and chip control that enhance process stability The rhombic CCMT form with an 80° geometry and 0.8 mm corner radius balances cutting strength and finish capability. The one-sided chipbreaker guides and fragments chips effectively, reducing recutting and promoting safe evacuation even when machining sticky or work‑hardening alloys. The insert’s central hole with a single-sided countersink (40°–60°) ensures secure clamping in compatible holders, lowering the risk of movement under heavy or interrupted loads and supporting repeatable results in series production. ISO compatibility and practical system integration Manufactured to the ISO turnover insert format, the item fits standard CCMT holders when matching form, clearance, tolerance class, fastening method, size and thickness. The 2.38 mm thickness and CCMT 06 size make the insert suitable for a broad set of external holders and boring bars; the recommended system includes the matching outer holder or boring bar, shim/clip and replacement screws. Clear identification by SKU and manufacturer numbers simplifies reordering and toolroom logistics, helping to keep machining cycles uninterrupted. For technical advice or to check stock and delivery options for the Tungaloy CCMT 060208 AH6235, contact Metav Werkzeuge or request an application consultation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6903440 SKU: 6903440-Tungaloy Manufacturer SKU: TUN6903440 Manufacturer article number: 6903440 Model series: ISO turning inserts Grade: AH6235 Material: carbide Designation: CCMT060208 AH6235 Tungaloy insert Core data Corner radius: 0.8 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size: 06 Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic plate form (CCMT) PVD-coated carbide grade AH6235 One-sided chipbreaker With hole for secure fastening Suitable for stainless steel and interrupted cuts ISO-compatible turning insert for external and internal turning System components: matching outer holder or boring bar, shim/clip and replacement screws FAQ Which materials is this insert best suited for? The CCMT060208 AH6235 insert (Tungaloy, SKU 6903440-Tungaloy) is designed primarily for stainless steel and performs well in interrupted cutting where toughness is required. What are the key geometry specifications to note? This insert features an 0.8 mm corner radius, 2.38 mm thickness and an 80° included angle; the clearance angle is 7°, aiding in controlled cutting and surface quality. How is the insert secured in the holder? Clamping is achieved via the central cylindrical hole with a single-sided countersink (40°–60°); this arrangement provides positive seating and repeatable positioning in compatible CCMT holders and boring bars. What benefits does the AH6235 grade provide? The AH6235 PVD-coated grade combines surface protection with a tough substrate to resist chipping, extend edge life and improve performance when machining work‑hardening alloys. Can this insert be used for internal turning operations? Yes — as an ISO CCMT turning insert, the plate is suitable for both external and internal turning when paired with the correct boring bar or holder matched to the insert’s form and size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade for improved edge security, a rhombic 80° geometry with a 0.8 mm corner radius, and ISO compatibility for reliable turning operations; order genuine inserts via Metav Werkzeuge or consult our specialists for application support. CCMT060208 AH6235 Tungaloy turning insert — ISO rhombic 80° insert for external and internal turning The CCMT060208 AH6235 is an ISO-standard rhombic indexable insert intended for turning, offering a tougher PVD-coated carbide grade suited to stainless steels and interrupted cuts PVD-coated carbide for stainless steels Rhombic 80° geometry, 7° relief 0.8 mm corner radius for versatile turning Central hole with 40°–60° countersink Consistent performance in stainless-steel turning The CCMT060208 AH6235 insert combines a PVD-coated carbide matrix with a tougher grade designated AH6235, specifically developed for machining stainless steels and for operations with a higher risk of edge breakout. The coating and substrate synergy improves resistance to built-up edge and thermal wear, which translates into more predictable tool life and consistent surface finish. For production environments where component repeatability matters, this specification reduces variation between parts and supports process stability during both external and internal turning operations. Secure clamping and straightforward ISO compatibility The rhombic 80° geometry and 7° relief angle deliver a balance between penetration and edge support, while the plate dimensions (size 06, 2.38 mm thickness) match ISO standards for easy integration with common holders and boring bars. Compatibility to a clamping system is determined by form, relief, tolerance class, fastening, size and thickness; the insert’s central hole with cylindrical bore and single-sided countersink (40°–60°) ensures reliable mechanical seating and repeatable clamping. Clear, ISO-based specifications enable quick replacement and reduced setup time when switching inserts, which aids lean production and minimises spindle downtime. Productivity advantages and reduced downtime The one-sided chipbreaker geometry and 0.8 mm corner radius are optimised for a range of turning tasks where chip control and edge robustness are priorities. Using a tougher grade for interrupted cuts lowers the likelihood of premature edge chipping and the need for unplanned tool changes, contributing to a higher effective machining uptime. The grade’s resistance to mechanical shock and wear also supports longer inspection intervals and a lower total cost per part. For operations seeking measurable efficiency gains, the insert’s combination of wear resistance and geometric stability delivers practical savings in setup and maintenance time. For application advice or to procure authentic Tungaloy CCMT060208 AH6235 inserts, contact Metav Werkzeuge for availability and machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6890164 Manufacturer SKU: TUN6890164 SKU: 6890164-Tungaloy Model series: ISO turning indexable inserts Designation: CCMT060208 AH6235 Facts Radius: 0.8 mm Relief angle: 7° Insert angle: 80° Thickness: 2.38 mm Size: 06 Special features Material: carbide Coating: PVD, grade AH6235 Plate shape: rhombic Central hole: with cylindrical bore + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical use: external and internal turning; interrupted cuts FAQ What materials is this insert suitable for? The CCMT060208 AH6235 insert is formulated for stainless steels and is suitable for applications where interrupted cuts or elevated breakout risk occur. How does the AH6235 grade affect tool life? The AH6235 PVD-coated carbide improves resistance to chipping and thermal wear, which typically results in longer edge life compared with standard grades under similar turning conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (size 06, 2.38 mm thickness, rhombic form) and is compatible with holders that match form, relief angle, tolerance class, fastening and size. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and finish quality, offering better load distribution for moderate-depth cuts while preserving a good surface finish. Does the central hole design affect clamping reliability? The central hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures secure seating and stable clamping, improving repeatability during indexable insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide for reliable edge life, a precise 0.8 mm corner radius for steady part quality, and ISO compatibility for straightforward holder matching — order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. CCMT 060208 AH725 indexable turning insert — ISO CCMT, PVD-coated carbide, for turning applications (Tungaloy) CCMT 060208 AH725 is an ISO‑standard indexable insert for general turning; the rhomboid geometry and single‑sided chipbreaker suit external and internal turning tasks where process reliability is essential ISO CCMT rhombic insert, size 06 AH725 PVD-coated carbide grade 0.8 mm corner radius for consistent finish Cylindrical hole with 40°–60° countersink Consistent cutting performance through optimised grade and coating The combination of the AH725 grade and a PVD coating delivers a balance of wear resistance and toughness tailored for mixed production environments. This universal, fracture‑resistant grade is designed for machining Stahl and rostfreie Stähle, making it suitable where workpiece materials vary. The coating reduces flank wear and improves tool life under interrupted cuts, while the substrate maintains edge strength; together they provide measurable gains in process stability and predictable maintenance intervals. Accurate geometry for dependable surface quality and chip control The insert’s rhomboid form and single‑sided chipbreaker promote controlled chip formation and stable cutting forces. With a corner radius of 0.8 mm and an 80° lead angle, the geometry supports fine surface finishes and repeatable dimensional results, especially on small tools and short overhangs. The one‑side chipbreaker is effective where mixed turning operations require a compromise between strength and chip evacuation, reducing the need for frequent rework and improving overall machining throughput. Straightforward mounting and ISO compatibility reduce setup time Compatibility with the clamping system depends on form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation ensures the insert integrates with standard CCMT holders. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure fastening. Using standard underplates, clamping sets and replacement screws simplifies inventory and changeovers, lowering setup times and reducing risk during tool changes. The standardised dimensions make cross‑platform replacement predictable and safe. Practical benefits for production: reliability, flexibility and uptime The PVD‑coated carbide construction of this indexable insert supports continuous production by extending tool life and maintaining edge integrity under varied conditions. The universal nature of the grade means fewer tool variants are required in stock, increasing flexibility when switching between components or batches. For operations prioritising process reliability, the insert contributes to reduced downtime, fewer quality deviations and a more stable cost per part over production runs. For production enquiries or guidance on holder selection for Tungaloy inserts, contact Metav Werkzeuge — our specialists provide application advice and can recommend the correct clamping set for each operation Technical data Manufacturer article number: 6856697 SKU: 6856697-Tungaloy Manufacturer SKU: TUN6856697 Model series: ISO-Drehwendeschneidplatten Designation: CCMT060208 AH725 Numbers / Core technical data Size: 06 ISO code: 060208 Corner radius: 0.8 mm Thickness: 2.38 mm Clearance (relief) angle: 7° Lead angle: 80° Designs / Special features Material: carbide Coating: PVD-coated carbide grade AH725 Plate shape: rhomboid Mounting: with hole, cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Compatibility: ISO-standard insert for CCMT holders FAQ What materials is this insert suitable for? The CCMT 060208 AH725 insert is intended for machining Stahl and rostfreie Stähle, offering a universal, fracture-resistant grade for mixed-material production. How does the AH725 grade improve process reliability? AH725’s PVD-coated carbide construction on the CCMT insert increases wear resistance while maintaining edge toughness, resulting in fewer unexpected tool failures and more consistent cycle times. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO CCMT designation ensures fitment with standard external and internal turning holders designed for CCMT inserts. Can the insert handle interrupted cuts and small tools? Yes — the fracture-resistant grade and robust substrate make the insert well suited to interrupted cuts and applications with smaller tooling, supporting stable cutting even under variable engagement conditions. What is the meaning of the hole and countersink specification? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to allow reliable clamping with standard screws and clamping sets, ensuring repeatable seat and torque values Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and a precise 0.8 mm nose radius for consistent turning results; the ISO CCMT form ensures simple holder compatibility while the universal AH725 grade delivers secure chip control and reliable tool life — order via Metav Werkzeuge or contact the consultants for tailored advice. CCMT060208 AH725 turning insert (ISO CCMT060208) by Tungaloy — PVD-coated carbide for turning A CCMT060208 AH725 ISO turning insert designed for external and internal turning operations, offering a rhombic form, one-sided chipbreaker and mounting via a cylindrical hole with a 40°–60° countersink. ISO CCMT form, 80° included angle PVD-coated AH725 carbide grade One-sided chipbreaker for stable chips Accurate fit and predictable clamping for quick tool changes The ISO CCMT060208 geometry follows international standards, which makes matching the insert to a suitable holder straightforward: compatibility is determined by form, relief angle, tolerance class, attachment method, size and thickness. The rhombic shape with an 80° included angle provides a balanced compromise between strength and access, while the cylindrical hole with a 40°–60° countersink secures repeatable seating. This standardisation reduces setup time, minimises alignment errors and supports predictable tool life — important for batch production and mixed-operation shops where reproducibility matters. Material and coating tuned for mixed-material shop floors The PVD layer on the PVD-coated carbide substrate and the AH725 grade combine to form a universal, breakage-resistant solution for machining Stahl and rostfreier Stahl. The coating improves wear resistance at elevated temperatures and helps maintain edge integrity during interrupted cuts or when switching between materials. In practice, this means fewer indexings and longer service intervals compared with uncoated grades, which translates into better machine uptime and lower per-part tooling cost while maintaining consistent surface finish quality. Chip control and process security for stable productivity The single-sided chipbreaker provides controlled chip formation under a range of cutting conditions; this aids evacuation and reduces the risk of re-cutting chips, particularly in short-to-medium turning operations. Combined with the modest 0.8 mm nose radius, the insert supports good surface finish without excessive cutting forces, making it suitable for finishing and medium roughing passes. The 7° relief prevents rubbing at the flank and helps preserve tool geometry, so the cutting action remains efficient and repeatable, supporting higher process security on automated lathes. Practical system considerations and application recommendations Installed as part of an ISO-turning system — insert, matching external holder or boring bar, shim/locating set and spare clamping screws — this plate is well suited to conventional and CNC turning. The plate thickness of 2.38 mm contributes to rigidity in smaller toolholders, and the size designation 06 corresponds to common holder families, easing procurement and stock management. Where machining mixes of Stahl and rostfreier Stahl are frequent, the AH725 grade reduces the need for multiple specialised grades, simplifying tool inventory and lowering total tooling costs over time. For process-secure turning with Tungaloy's AH725 grade and standard ISO compatibility, contact Metav Werkzeuge for order support and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with selection and logistics. Technical Data Article number: 6856762 SKU: 6856762-Tungaloy Manufacturer SKU: TUN6856762 Brand: Tungaloy Series: ISO turning indexable inserts Numbers / Core Technical Data Corner radius: 0.8 mm Insert thickness: 2.38 mm Relief angle: 7° Included angle: 80° ISO code: 060208 Plate size: 06 Special features / Versions Material: carbide Coating / grade: AH725, PVD-coated Plate form: rhombic Chipbreaker: one-sided Mounting: cylindrical hole with one-sided countersink (40°–60°) Typical application: turning (external and internal) FAQ What is the primary application for this insert? The CCMT060208 AH725 turning insert by Tungaloy is intended for external and internal turning operations, offering stable chip control and reliable performance when machining Stahl and rostfreier Stahl. How does the AH725 grade perform across different materials? The AH725 PVD-coated carbide grade provides universal, breakage-resistant behaviour; this makes the insert suitable for mixed-material environments where switching between Stahl and rostfreier Stahl is common. Which holders are compatible with the ISO CCMT060208 geometry? Compatibility depends on form, relief angle, tolerance class, attachment type, size and thickness; holders matching the CCMT form and size 06 with support for a 2.38 mm thickness are appropriate for this insert. What does the one-sided chipbreaker deliver in practice? The one-sided chipbreaker helps to produce predictable, segmented chips that evacuate cleanly, reducing re-cutting and aiding consistent surface finish, especially during short to medium turning passes. Is the insert suitable for finishing passes? Yes. The 0.8 mm nose radius and 7° relief balance surface finish and cutting forces, making the insert suitable for finishing and medium roughing when the appropriate cutting parameters are applied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide, a universal AH725 grade for steel and stainless steel, and a precise 0.8 mm corner radius to secure consistent chip control and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT 060208 AH725 ISO turning insert — PVD-coated carbide, 0.8 mm radius — Tungaloy A CCMT060208 AH725 ISO turning insert engineered for reliable external and internal turning with a one-sided chipbreaker and screw clamping. PVD-coated carbide for extended tool life Universal AH725 grade for steel and stainless steel 0.8 mm corner radius for precise finishes 7° clearance angle for stable cutting Consistent process security for mixed materials The PVD-coated cemented carbide substrate and the AH725 grade provide a balanced combination of wear resistance and fracture toughness, designed for mixed-material runs. For shops processing both steel and stainless steel, this geometry reduces unexpected insert failure by offering stable cutting-edge behaviour. The one-sided chipbreaker assists chip control in interrupted cuts, and the PVD coating helps reduce built-up edge, which translates into fewer tool changes and more predictable cycle times. Precision geometry that matches modern toolholders The rhombic form with an 80° included angle and 7° clearance ensures compatibility with a wide range of ISO toolholders; compatibility is determined by form, relief angle, tolerance class, mounting and thickness. The insert’s thickness of 2.38 mm and the central hole with a cylindrical bore and single-sided countersink (40°–60°) permit secure screw clamping and repeatable seating. Clear specification of these parameters supports correct holder selection and reduces setup iterations at the machine. Fine finishing and dimensional control with 0.8 mm radius A 0.8 mm corner radius offers a practical compromise between strength and surface quality: it withstands moderate cutting forces while producing improved surface finishes over sharper radii. Where fine tolerance and surface integrity matter, the radius helps to avoid edge chipping and reduces vibration. In combination with the insert’s form and chipbreaker, the result is a cut that promotes consistent component dimensions and lowers the need for secondary operations. Practical selection guidance and application scope Designed primarily for turning — both external and internal — the insert is recommended for small-to-medium tool geometries and operations that prioritise process reliability. The universal nature of the AH725 grade makes it suitable for varying workpiece materials within a batch, reducing inventory complexity. When selecting inserts, match the chipbreaker and grade to the workpiece material and machine stability: a softer, more ductile material will benefit from a different chip control strategy than harder alloys. For process-secure turning with Tungaloy’s AH725 grade and PVD-coated carbide technology, contact Metav Werkzeuge for tailored advice and rapid delivery Technical data Article number: 6865364 Manufacturer SKU: TUN6865364 SKU: 6865364-Tungaloy Series: ISO turning inserts Designation: CCMT060208 AH725 Tungaloy insert Core technical data Corner radius: 0.8 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 80° Size: 06 Special features PVD-coated cemented carbide, grade AH725 Rhombic form, size 06 With hole; cylindrical hole + single-sided countersink (40°–60°) One-sided chipbreaker Application: Turning (external and internal) FAQ What materials is this insert suitable for? The CCMT060208 AH725 insert is formulated as a universal grade for steel and stainless steel, making it suitable for mixed-material production where consistent edge strength and chip control are required. How does the chipbreaker influence performance? The one-sided chipbreaker on this insert improves chip formation and evacuation in typical turning operations, helping to reduce entanglement and supporting improved surface quality under variable cutting conditions. Which clamping system is required for this insert? The insert features a central cylindrical hole with a single-sided countersink (40°–60°) and is intended for screw clamping in compatible ISO toolholders; ensure the holder matches the insert’s form, size and thickness for correct seating. Is the geometry suitable for finishing operations? Yes. The 0.8 mm corner radius and the rhombic 80° geometry are well suited to fine finishing and dimensionally sensitive tasks while still providing sufficient edge strength. How does the PVD coating benefit machining? The PVD coating offers improved wear resistance and reduced built-up edge compared with uncoated substrates, extending tool life and stabilising cutting performance across varying workpiece materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8005 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8005 grade and a 0.8 mm corner radius that combine to deliver wear resistance and stable performance in demanding turning tasks; order the insert directly via Metav Werkzeuge or consult our specialists for application matching and delivery options. CCMT060208 AH8005 indexable turning insert — PVD-coated carbide, 0.8 mm radius — Tungaloy The CCMT060208 AH8005 is an ISO-format indexable turning insert designed for stable external and internal turning of heat‑resistant alloys and hard materials, optimised for consistent chip control and long tool life. CCMT060208 ISO format, rhombic 80° geometry PVD-coated carbide AH8005 for wear resistance 0.8 mm corner radius for versatile turning Cylindrical hole with single-side countersink Increase uptime with wear-resistant coating and robust substrate The combination of a PVD-coated surface and a carbide substrate in grade AH8005 is engineered for abrasion resistance and reduced flank wear during sustained cutting. This results in longer intervals between indexings and fewer tool changes, which supports higher machine utilisation in production environments. With a defined clearance angle of 7° and a plate thickness of 2.38 mm, the geometry assures rigidity under load, helping to maintain dimensional stability when machining tougher alloys. Secure clamping and international ISO compatibility for predictable results Built to the ISO CCMT060208 format, the rhombic 80° geometry and the cylindrical hole with single‑side countersink (40°–60°) enable reliable mechanical clamping in compatible holders. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; selecting a matching holder and clamp ensures repeatable seating and cutting edge security. The single‑sided chipbreaker promotes controlled chip formation, contributing to improved surface finish and safer chip evacuation in both external and internal turning applications. Practical application advice for stable, high‑quality turning For general turning tasks where heat‑resistant alloys or harder workpiece materials are involved, the single‑cut geometry with a 0.8 mm corner radius delivers a balance between edge strength and profile fidelity. The insert’s design supports operators and process planners who prioritise consistent results and reduced rework. For specialised materials or unstable setups, choose an appropriate chipbreaker and consider machine rigidity and fixture design to exploit the full potential of the grade AH8005 in serial or batch production. Contact Metav Werkzeuge for application matching, availability and technical guidance on this Tungaloy CCMT060208 AH8005 indexable turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749951 Manufacturer SKU: TUN6749951 Stock SKU: 6749951-Tungaloy Numbers and measurements ISO designation: 060208 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 2.38 mm Geometry angle: 80° Designs and special features Grade/coating: AH8005 (PVD-coated carbide) Plate form: rhombic (CCMT) Hole: with cylindrical hole + single-side countersink (40°–60°) Chip control: single-sided chipbreaker Typical application: turning (external and internal) Model series: ISO turning indexable inserts Material: carbide FAQ What workpiece materials is this insert suitable for? The CCMT060208 AH8005 insert is intended for heat‑resistant alloys and hard materials, offering abrasion resistance for stable cutting under demanding conditions. Which holder features must match for correct clamping? Compatibility requires a matching holder in terms of form, clearance angle (7°), tolerance class, fixing method, size and plate thickness (2.38 mm) to ensure secure seating of the CCMT060208 insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides enhanced edge strength for interrupted or heavier cuts while maintaining good profile control for general turning tasks. Is the insert suitable for internal turning as well as external turning? Yes, the insert’s rhombic geometry and chipbreaker design make it suitable for both internal and external turning operations when paired with the appropriate holder. What is the manufacturer part number and brand? The item is supplied as part number 6749951 from Tungaloy and is identified as CCMT060208 AH8005 in the Tungaloy range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and a 0.8 mm corner radius for stable turning of demanding materials; the ISO indexable format ensures predictable tool changes and repeatable clamping. Order the CCMT060208 AH8005 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060208 AH8005 Tungaloy – indexable turning insert for Drehen, PVD-coated carbide, 0.8 mm radius CCMT060208 AH8005 Tungaloy is an ISO-indexable turning insert designed for stable machining of heat-resistant alloys and hard materials in external and internal turning applications. PVD-coated carbide grade AH8005 0.8 mm corner radius for smooth transitions 7° clearance angle for reduced rubbing Rhombic CCMT form with central hole Consistent cutting performance for demanding turning tasks The PVD-coated carbide grade AH8005 is specified for wear-resistant performance when machining heat-resistant alloys and other hard materials. The coating improves thermal resistance and adhesion to the substrate, which extends life under elevated cutting temperatures. As a result, the indexable cutting element provides a balance between tool life and dimensional stability, reducing interruptions for insert changes and helping maintain steady production output. Predictable fit and simple integration in ISO tooling systems Supplied in the ISO CCMT format, the insert matches holders according to form, clearance, tolerance class, fastening method, size and thickness. The rhombic plate with a central hole and one-sided countersink (40°–60°) ensures secure clamping in compatible external holders or boring bars. With an insert thickness of 2.38 mm and a 0.8 mm corner radius, the component integrates into standard tool systems with predictable mechanical engagement, easing tool management and inventory control in the workshop. Improved chip control and application suitability A single-sided chipbreaker is provided to support stable chip formation in steady turning operations; the chipbreaker should be selected to match workpiece material, cutting conditions and machine rigidity. The 7° clearance and approx. 80° cutting edge geometry reduce flank contact and help deliver consistent surface finish. For jobs where stability and repeatability are priorities, this insert offers reliable cutting behaviour and contributes to higher productivity and reproducible part quality. Contact Metav Werkzeuge today for tailored application advice and to secure original Tungaloy CCMT060208 AH8005 inserts; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6749947 SKU: 6749947-Tungaloy Manufacturer SKU: TUN6749947 Product designation: CCMT060208 AH8005 Tungaloy insert Model series: ISO-turning indexable inserts Material: Carbide Numbers / Core technical data Corner radius: 0.8 mm Clearance angle: 7° Insert thickness: 2.38 mm Insert size: 06 ISO code: 060208 Cutting-edge angle: 80° Designs / Special features PVD-coated carbide grade AH8005 Single-sided chipbreaker Rhombic plate form (CCMT) Central hole with cylindrical bore and one-sided countersink (40°–60°) Compatible with standard ISO turning holders and clamping sets FAQ What materials is this insert best suited for? The CCMT060208 AH8005 Tungaloy insert is designed primarily for heat-resistant alloys and other hard materials; the AH8005 grade offers enhanced wear resistance under elevated cutting temperatures. How is the insert secured in the holder? The rhombic insert is clamped via its central hole with a cylindrical bore and a one-sided countersink (40°–60°); proper matching of holder form and tolerance class ensures secure seating and repeatable positioning. What does the 0.8 mm radius mean for surface finish? A 0.8 mm corner radius provides a compromise between strength and finish: it smooths cutting transitions for improved surface quality while maintaining edge robustness for stable turning. Can this insert be used for internal and external turning? Yes, the ISO-indexable format and CCMT geometry make the insert suitable for both external and internal turning when combined with the appropriate holder or boring bar. How should the chipbreaker be chosen for an application? Select the chipbreaker that matches the workpiece material, machining method and machine rigidity; the single-sided chipbreaker on this insert supports controlled chip formation in stable turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide robustness, ISO-standard geometry and secure clamping for consistent turning results; order the CCMT060208 AH8015 indexable insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. CCMT 060208 AH8015 indexable insert for turning — Tungaloy The CCMT060208 AH8015 indexable turning insert provides a balance of wear resistance and edge stability for machining heat‑resistant alloys and general turning tasks. CCMT 060208 rhombic insert geometry PVD-coated carbide AH8015 grade 0.8 mm corner radius for edge strength Compatible with 80° holders, cylindrical hole High‑performance cutting grade for demanding alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for machining heat‑resistant alloys, offering an effective compromise between wear resistance and edge toughness. This balance reduces flank wear under elevated temperatures and extends useful cutting life, which in turn supports predictable cycle times and reduced tooling changeovers. The grade is suitable where temperature stability and repeatable edge performance matter. Secure geometry and reliable clamping for predictable results Built to the ISO CCMT060208 form, the insert features a rhombic outline, an 80° engagement angle and a 7° clearance that together provide stable contact and chip flow during external and internal turning. The cylindrical hole with one-sided countersink (40°–60°) and the standard thickness of 2.38 mm ensure consistent seating and torque distribution in compatible holders. These design choices reduce the risk of misalignment and improve surface finish repeatability when the insert and holder match in form and tolerance. Practical advantages that improve shop productivity The single‑sided chipbreaker works with the AH8015 grade to control swarf formation and evacuation when paired with the correct feed and stability conditions. A 0.8 mm corner radius strengthens the cutting edge against chipping during interrupted cuts and offers a compromise between edge life and finish quality. Selecting the right chipbreaker and feed strategy results in fewer unexpected interruptions and a more economical process across series production. For tailored advice on holder compatibility or to confirm the best machining parameters for the AH8015 grade, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — the sales engineers can recommend the optimal insert and clamping solution for the application. Technical Data Article number: 6749952 SKU: 6749952-Tungaloy Manufacturer SKU: TUN6749952 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: CCMT060208 Insert size: 06 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Angle: 80° Special features Material: carbide Coating / grade: PVD-coated AH8015 Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ Is this insert suitable for heat‑resistant alloys? Yes. The CCMT060208 AH8015 insert uses a PVD‑coated carbide grade specifically chosen as a first option for machining heat‑resistant alloys, balancing wear resistance and edge stability. Which holder features are required for correct mounting? Compatibility depends on holder form, clearance, tolerance class, fastening and insert thickness; the CCMT060208 geometry and the cylindrical hole with one‑sided countersink require a matching 80° style holder and correct clamp or screw. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and resistance to chipping during interrupted cuts while maintaining a good surface finish, making the insert versatile for a range of turning operations. Can the insert be used for internal turning as well as external turning? Yes. The insert’s rhombic form and chipbreaker design allow use in both external and internal turning applications when the correct holder and process parameters are chosen. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker on this grade promotes controlled chip formation and evacuation for the intended materials and cutting conditions, contributing to consistent surface quality and reduced risk of entanglement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of stable edge life, reliable chip control and ISO compatibility for consistent turning operations; order the CCMT060208 AH8015 turning inserts directly via Metav Werkzeuge or request advice from our consultants. CCMT060208 AH8015 CCMT ISO turning insert for turning, 80° rhombic – Tungaloy The CCMT060208 AH8015 is a PVD-coated carbide ISO turning insert designed for general turning of heat-resistant alloys, offering a balanced mix of wear resistance and edge stability in external and internal turning applications. 80° rhombic CCMT 060208 geometry PVD-coated carbide AH8015 for heat alloys Single-sided chipbreaker for consistent chips Cylindrical hole with one-sided countersink High productivity in machining heat-resistant alloys The combination of a PVD-coated carbide substrate and the AH8015 grade provides a pragmatic balance between wear resistance and cutting-edge stability, making the insert well suited to machining heat-resistant alloys where thermal load is a concern. The coated substrate reduces flank wear and extends tool life compared with uncoated grades, which in turn contributes to fewer insert changes and improved process economy. For workshops requiring dependable, repeatable results, this geometry supports steady metal removal without sacrificing surface quality. Geometry and clamping ensure repeatable performance The rhombic 80° geometry and a corner radius of 0.8 mm yield a versatile cutting edge for both finishing and medium-turning operations. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to match standard ISO clamping systems; compatibility is determined by form, relief angle, tolerance class, fastening and thickness. The 7° relief angle and 2.38 mm thickness contribute to secure seating in the holder and reduce vibration, thereby improving dimensional stability during cuts and extending the life of both insert and holder. Practical benefits for workshop efficiency A single-sided chipbreaker optimises chip formation for turning processes that require controlled chip evacuation and consistent surface finish. The standardised ISO format eases inventory management and reduces set-up complexity because compatible holders and backup screws are widely available. The insert’s combination of toughness and wear resistance reduces downtime for changes and supports higher uptime in serial production. Where resource allocation and predictable tool life matter, this insert delivers clear operational advantages without complex process changes. Selecting the right grade and using it correctly This grade is recommended as a first choice for general machining of heat-resistant alloys and similar materials; select the chipbreaker and grade according to stock material and machining stability. While specific cutting parameters depend on machine rigidity and material condition, choosing a PVD-coated AH8015 insert helps achieve a good balance between surface quality and tool life. For applications outside standard alloys, consult tooling guidelines to confirm suitability and optimise feeds and speeds for the specific setup. Contact Metav Werkzeuge for a tailored recommendation on the CCMT060208 AH8015 turning insert and assistance in selecting compatible holders and clamping kits Technical Data Article number: 6825744-Tungaloy Manufacturer SKU: TUN6825744 Manufacturer article number: 6825744 Product designation: CCMT060208 AH8015 Tungaloy turning insert Facts Corner radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Insert size: 06 Approach angle: 80° Special features Grade: AH8015 (PVD-coated carbide) Shape: rhombic CCMT Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink (40°–60°) Model series: ISO turning inserts Typical application: external and internal turning; select chipbreaker and grade to match material and stability FAQ What materials is this insert suitable for? The CCMT060208 AH8015 insert is intended primarily for general machining of heat-resistant alloys; the AH8015 grade offers a balanced combination of wear resistance and edge stability suited to these materials. How does the chipbreaker influence performance? The single-sided chipbreaker on the CCMT060208 AH8015 promotes consistent chip formation and evacuation, which helps maintain surface finish and reduce built-up edge during turning. Which holders are compatible with this insert? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; CCMT-format ISO holders that match these parameters will accept the CCMT060208 AH8015 insert. What are the key dimensions to check when replacing an insert? Check the insert size (06), corner radius (0.8 mm), thickness (2.38 mm), relief angle (7°) and hole/countersink details to ensure correct fit and clamping in the holder. Is the coating specified for this grade? Yes, the AH8015 designation indicates a PVD-coated carbide substrate, which provides improved wear resistance and cutting-edge stability for the intended applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of wear resistance, edge stability and precise chip control for reliable turning of heat‑resistant alloys; order originals via Metav Werkzeuge or consult our specialists for application support. CCMT 060208 AH8015 ISO turning insert by Tungaloy — PVD-coated cemented carbide, 0.8 mm nose radius A CCMT060208 AH8015 ISO turning insert designed for general turning applications, optimised for heat‑resistant alloys with a balance of wear resistance and cutting‑edge stability. ISO CCMT form, rhombic insert 80° angle PVD-coated cemented carbide AH8015 grade With cylindrical hole and 40°–60° countersink 0.8 mm nose radius for precise chip control High‑performance grade for demanding turning operations The PVD‑coated cemented carbide grade AH8015 offers a deliberate compromise between wear resistance and edge stability, making this insert a dependable choice for machining heat‑resistant alloys. The coating improves resistance to abrasive and adhesive wear at elevated temperatures, while the substrate maintains the integrity of the cutting edge. This combination supports consistent component quality and helps to reduce frequency of insert changes, thereby contributing to steady production throughput. Reliable fit and predictable mounting for process security Compatibility with toolholders is governed by form, clearance angle 7°, tolerance class, fastening, size and thickness. The rhombic ISO CCMT060208 geometry and the cylindrical hole with single‑side countersink (40°–60°) ensure repeatable seating in ISO‑compatible holders. The 2.38 mm plate thickness and standard size designation facilitate straightforward replacement and inventory management. These measurable interfaces enable predictable clamping behaviour and contribute to stable cutting conditions. Controlled chip formation and surface quality The insert’s single‑sided chipbreaker geometry works with a 0.8 mm nose radius to produce short, manageable chips and to support consistent surface finish during external and internal turning. In combination with the AH8015 grade, the chip control reduces built‑up edge tendency on workpiece materials with higher thermal sensitivity, improving part integrity and minimising secondary operations. For many workshops, this leads to enhanced process efficiency and fewer interruptions. Application guidance and selection for productivity This indexable cutting insert is optimised for general turning of heat‑resistant alloys; select the chipbreaker and grade variant according to workpiece material, machining strategy and machine stability. Where higher edge robustness is required, AH8015 provides a good balance for intermittent cuts and mixed batches. The rhombic CCMT geometry offers flexibility for a range of turning tasks and simplifies inventory by covering multiple applications with a single ISO‑standard insert. Contact Metav Werkzeuge for application advice and to order Tungaloy CCMT060208 AH8015 original inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid supply. Technical data Article number: 6825782 SKU: 6825782-Tungaloy Manufacturer SKU: TUN6825782 Manufacturer: Tungaloy Data ISO designation: CCMT060208 Insert size: 06 Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Nose radius: 0.8 mm Special features Material: cemented carbide Coating: PVD Grade: AH8015 Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipformer: single-sided chipbreaker Application: turning (external and internal) FAQ What materials is this insert suitable for? The AH8015 grade insert is intended primarily for machining heat‑resistant alloys; the PVD coating and carbide substrate together support wear resistance and edge stability during such operations. Is the CCMT060208 compatible with standard ISO toolholders? Yes, the CCMT060208 designation and the rhombic form are ISO‑standard; compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness. How does the single‑sided chipbreaker affect performance? The single‑sided chipbreaker on this insert promotes reliable chip control, especially when combined with the 0.8 mm nose radius, improving surface finish and reducing risk of long, tangled chips. Can this insert be used for internal turning? The insert is suitable for both external and internal turning when mounted in appropriate ISO‑compatible holders that accept CCMT inserts and the required cutting geometry. What are the main benefits of the AH8015 grade? AH8015 provides a balanced mix of wear resistance and edge stability, making it a first choice for general machining of heat‑resistant alloys where consistent tool life and surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability of the PVD‑coated AH8015 grade together with the predictable fit of an ISO‑standard insert to keep turning processes steady and productive; order the CCMT060208 AH8015 Tungaloy turning insert via Metav Werkzeuge or consult our experts for tailored advice. CCMT 060208 AH8015 indexable turning insert – PVD‑coated carbide, 0.8 mm radius (Tungaloy) The CCMT060208 AH8015 Tungaloy Turning Insert is an ISO‑standard rhombic indexable insert designed for external and internal turning of heat‑resistant alloys, offering a combination of edge stability and wear resistance suited to general turning tasks. ISO‑standard rhombic insert CCMT 06 format PVD‑coated carbide grade AH8015 0.8 mm corner radius for robust edge life Cylindrical hole with single‑side countersink Consistent performance on heat‑resistant alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for machining heat‑resistant alloys, providing a well‑balanced combination of wear resistance and cutting‑edge stability. The coating reduces adhesive wear and thermal softening during continuous cuts, which translates into longer intervals between indexings and fewer interruptions. For operations where thermal loads are significant, this balance helps maintain component tolerance and surface quality while avoiding premature edge chipping. Predictable fit and reduced setup time As an ISO‑standard insert, compatibility with holders and boring bars is determined by the insert form, 7° clearance angle, tolerance class, fastening method, size and 2.38 mm thickness. This standardisation enables straightforward substitution and predictable seating in clamping systems, lowering set‑up errors and downtime. In practice, the clearly defined geometry helps workshops maintain reproducible tool offsets and reduces the need for trial cuts when changing inserts between machines or holders. Geometry engineered for chip control and edge life The rhombic CCMT geometry with an 80° included angle and a 0.8 mm corner radius gives a robust cutting edge that tolerates interrupted cuts while still enabling fine surface finishes when required. The insert’s single‑sided chipbreaker is tuned for turning, directing chips reliably away from the workpiece to improve evacuation and reduce recutting. The central cylindrical hole with a single‑side countersink (40°–60°) secures repeatable clamping and consistent seat pressure, aiding in vibration damping and extending tool life. System clarity and workshop benefits An insert forms part of a system comprising the ISO plate, a matching external holder or boring bar, a shim or clamp set and replacement screws. Keeping spares for the complete set ensures quick changeover. The indexable insert principle means that worn edges can be rotated out of service quickly without regrinding, supporting higher machine uptime and predictable process economics. Choosing a balanced grade such as AH8015 helps to standardise cutting data across a range of heat‑resistant materials and reduces the need for multiple specialised grades. For reliable turning of heat‑resistant alloys, specify the Tungaloy AH8015 CCMT insert and contact Metav Werkzeuge for procurement and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6749948 Manufacturer SKU: TUN6749948 SKU: 6749948-Tungaloy Designation: CCMT060208 AH8015 Facts Plate size: 06 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° ISO code: 060208 Special features Material: carbide Coating: PVD Shape: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑sided chipbreaker Application: turning (external and internal) Grade: AH8015 — balanced wear resistance and edge stability System: ISO‑standard insert for use with compatible holders, shims and screws FAQ Which materials is this insert suitable for? The CCMT060208 AH8015 Tungaloy insert is intended primarily for heat‑resistant alloys and offers a balanced combination of wear resistance and edge stability for general turning tasks. What are the key dimensional specifications to check before mounting? Verify the 2.38 mm thickness, 0.8 mm corner radius, 7° clearance angle and the CCMT 06 format to ensure correct seating in the chosen holder. How does the chipbreaker influence machining? The single‑sided chipbreaker on this indexable insert improves chip formation and evacuation during turning, helping to protect the cutting edge and the workpiece surface finish. Can the insert be used for internal turning or only external facing? The geometry and chip control features suit both external and internal turning when matched with an appropriate boring bar or holder. What does the AH8015 designation mean? AH8015 denotes a PVD‑coated carbide grade optimised for machining heat‑resistant alloys, offering a compromise between wear resistance and edge toughness for reliable performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060208 AT9530 Wendeplatten - Tungaloy
Product data conflict: the entry lists the tool substrate as both cemented carbide and coated cermet. These specifications are inconsistent; a reliable product description cannot be generated from the provided data, as the conflicting information creates ambiguity regarding the material composition and intended application of the tool, making it difficult to determine whether the product is optimised for wear resistance, toughness, or specific machining conditions. Accurate and consistent data is essential for ensuring that customers can make informed decisions, and discrepancies like this undermine confidence in the product's description, potentially leading to incorrect usage or performance issues in practical applications.
CCMT 060208 GH730 Wendeplatten - Tungaloy
Optimise turning operations with a cost-effective GH730 grade that combines wear resistance and edge stability with ISO compatibility for fast integration; order the CCMT 060208 directly via Metav Werkzeuge or ask the consultants for tailored recommendations. CCMT 060208 GH730 – ISO turning insert, rhombic 80° by Tungaloy A CCMT 060208 GH730 carbide indexable insert from Tungaloy designed for ISO-compliant external and internal turning, featuring a single-sided chipbreaker for reliable chip control CCMT 060208 geometry for ISO holders GH730 grade for wear resistance Single-sided chipbreaker for stable cutting Rhombic 80° shape with 0.8 mm radius Improved process stability through grade and substrate The GH730 grade is a Tungaloy-developed carbide mix engineered to balance wear resistance and toughness, which results in a more consistent edge life under varying cutting conditions. This balance reduces the frequency of tool changes and supports longer uninterrupted machining cycles, improving overall productivity. For turning operations, particularly where mixed batches or varying workpiece conditions occur, the predictable performance of a well-chosen grade minimises scrap and increases first-pass yield. The grade complements the insert geometry to deliver reliable performance across common turning tasks. Precise geometry and straightforward holder compatibility The CCMT 060208 follows ISO dimensions and a rhombic 80° form, with a 0.8 mm corner radius and 7° clearance, and a plate thickness of 2.38 mm. These measurable features determine fit and function: form, clearance angle, tolerance class, fastening method, size and thickness are the criteria by which compatibility with a clamping system is assessed. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to match standard clamping screws and shims. As a result, integration into existing toolholders is straightforward when the holder is selected for the corresponding ISO insert family, reducing setup time and ensuring secure clamping during turning. Chip control and application-specific selection A single-sided chipbreaker is integrated to support controlled chip formation during both external and internal turning. The chipbreaker geometry directs chips away from the cutting zone, lowering risk of entanglement and improving surface finish. Selecting the correct chipbreaker and insert grade is essential: match the chipbreaker style and GH730 to the workpiece material, depth of cut and machine stability to obtain the best combination of surface quality and tool life. For unstable setups or interrupted cuts, the increased edge stability provided by the grade helps to avoid premature edge chipping. System advantages and practical handling The insert is intended to form part of a complete tool system consisting of the ISO plate, a matching external holder or boring bar, a shim/clamping set and replacement screws. This system approach simplifies maintenance: only the indexable insert is replaced while the holder remains in service, reducing tooling costs and inventory complexity. The standardised CCMT form enables flexible stock management across workshops, and the carbide substrate ensures consistent performance under regular turning loads. For application advice or to confirm the optimal combination of holder, chipbreaker and grade for a specific job, technical consultants at Metav Werkzeuge are available to assist. Consult Metav Werkzeuge for availability of CCMT 060208 GH730 inserts and guidance on holder selection — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for expert, application-oriented support Technical data Article number: 6820965 Manufacturer SKU: TUN6820965 Designation: CCMT060208 GH730 Tungaloy insert Model series: ISO turning indexable inserts Material: Carbide Plate form: Rhombic Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Shape angle: 80° Clearance angle: 7° Size: 06 Special features Single-sided chipbreaker Cylindrical hole with one-side countersink (40°–60°) GH730 Tungaloy grade ISO-compliant CCMT geometry Intended for external and internal turning FAQ Is the CCMT 060208 GH730 compatible with standard ISO holders? The CCMT 060208 GH730 insert is ISO-compliant; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness and should be checked against the holder specifications. Which workpiece materials suit this grade? The GH730 grade provides a balance of wear resistance and toughness suitable for a broad range of turning applications when matched with the correct chipbreaker and cutting parameters. What effect does the 0.8 mm corner radius have? A 0.8 mm corner radius increases edge strength and can improve tool life under heavier cuts, but it requires consideration for small-detail work where corner radii may influence part geometry. How is the insert secured in the holder? The insert features a cylindrical hole with a single-side countersink (40°–60°) and is secured using the appropriate screw, shim and clamping set for the chosen ISO holder. Can this insert be used for internal turning? Yes, the geometry and chip control features make the insert suitable for both external and internal turning when paired with a compatible boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of proven GH730 cutting-grade performance, ISO conformity and straightforward holder compatibility to improve productivity and tool life in turning operations; order genuine inserts through Metav Werkzeuge or contact our consultants for application advice. CCMT060208 GH730 indexable insert for turning — Tungaloy CCMT060208 GH730 Tungaloy indexable insert designed for ISO-conform turning operations, suitable for external and internal machining with standard CCMT-compatible holders ISO 060208 rhombic insert GH730 Tungaloy carbide grade Single-sided chipbreaker design Cylindrical hole with countersink Stable edge life for consistent production results The GH730 grade provides a balanced combination of wear resistance and toughness, delivering a reliable cutting edge under typical turning loads. This balance helps to extend tool life and reduce the frequency of insert changes, which directly contributes to higher machine uptime. The insert’s carbide substrate and optimised grade are intended to resist abrasive wear while maintaining edge stability during interrupted cuts, yielding consistent component quality and fewer rejects. Geometry tuned for secure chip control and surface finish With a rhomboid geometry and an included angle of 80°, the insert offers good support for general turning tasks while the single-sided chipbreaker steers chips away from the cutting zone. The 0.8 mm nose radius improves surface finish and part concentricity where small radii are required, while the 7° relief angle helps to reduce flank contact and heat build-up. Together these features translate into predictable chip formation and improved surface quality for many production scenarios. Compatible system integration for quick tool changes The insert follows ISO plate conventions (ISO 060208) and is compatible with CCMT-style external holders and boring bars when matched by form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a one-sided countersink (40°–60°) ensures positive clamping and repeatable seating in the pocket; the 2.38 mm plate thickness provides stiffness for stable cutting. Choosing the correct holder and tightening sequence ensures the insert performs to its technical potential and helps maintain process stability. Practical advantages for shop-floor handling and selection As an indexable solution, the plate simplifies tool management: multiple cutting edges per insert reduce inventory turnover and lower per-part tooling cost. The ISO 060208 format and the clearly defined features make selection straightforward when matching grade and chipbreaker to workpiece material and machining strategy. For operators less familiar with insert geometry, focusing on two parameters—nose radius for surface finish and chipbreaker style for chip behaviour—provides an effective starting point for productive setup. For tailored cutting data, material-specific recommendations or availability of original Tungaloy CCMT060208 GH730 inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930; our technical team will advise on optimal grades and clamping solutions. Technical data Article number: 6820964 Manufacturer SKU: TUN6820964 SKU: 6820964-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Designation: CCMT060208 GH730 Tungaloy insert Application: Turning Facts Size: 06 Insert thickness: 2.38 mm Nose radius: 0.8 mm Included angle: 80° Relief angle: 7° Countersink angle: 40°–60° Special features Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink GH730 Tungaloy cutting grade ISO 060208 standard For external and internal turning applications FAQ What machining tasks is this insert suitable for? The CCMT060208 GH730 Tungaloy insert is intended for general turning operations, including external and internal turning, where a balance of wear resistance and toughness is required. How does the GH730 grade influence performance? The GH730 grade offers a compromise between hardness and toughness, enabling stable cutting-edge behaviour and longer service life for carbide inserts in varied turning conditions. Which holder types are compatible with this insert? CCMT060208-form inserts fit CCMT-compatible external holders and boring bars when form, relief angle, tolerance and fastening match; the cylindrical hole with countersink ensures secure clamping. What effect does the 0.8 mm nose radius have on the part finish? A 0.8 mm nose radius smooths the machined surface and reduces scallop height, improving surface finish compared with smaller radii while still allowing for good dimensional control. Is this an original Tungaloy product and how is it identified? Yes — the insert is supplied as CCMT060208 GH730 from Tungaloy and is listed under article number 6820964 and manufacturer SKU TUN6820964. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com