CCMT 060208 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet GT9530 and the 0.8 mm corner radius to achieve consistent fine finishes and extended tool life in stable turning setups; compatibility with ISO holders and the central hole with countersink ensures straightforward clamping and repeatable positioning. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT060208 GT9530 Tungaloy indexable turning insert — rhombic, single‑sided chipbreaker The CCMT060208 GT9530 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning of steel, offering a coated cermet grade optimised for finishing to light universal operations. ISO‑standard rhombic CCMT form Coated cermet grade GT9530 for steel 0.8 mm corner radius for fine finishes Central hole with countersink (40°–60°) Increased productivity with a wear‑resistant cermet grade The coated GT9530 grade combines a wear‑resistant cermet surface with a geometry tailored for finishing and light universal turning. The material pairing provides a balance between surface quality and tool life, making it suitable for longer uninterrupted cycles under stable setup conditions. The single‑sided chipbreaker promotes predictable chip formation, reducing the risk of built‑up edge and enabling reliable cycle times in production environments where consistent results matter. Secure clamping and simple integration into ISO systems Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness. The rhombic CCMT form and the central hole with a cylindrical bore plus one‑sided countersink (40°–60°) allow positive mounting in standard holders and boring bars. A 7° clearance angle and the 80° included angle ensure correct seating and repeatable geometry, so set‑up times are minimised and machining precision is maintained across batches. Surface finish and recommended applications With a 0.8 mm corner radius and a 2.38 mm plate thickness, this insert is aimed at fine finishing and light turning of steel where a good surface and longer wear life are priorities. The cermet coating improves abrasion resistance and helps maintain cutting edge integrity, resulting in improved surface roughness without aggressive cutting parameters. For best results, pair the insert with a stable toolholder and choose cutting data that match the grade’s strengths in finishing operations. For project planning or to confirm suitability for a specific turning task, contact Metav Werkzeuge for technical advice or immediate supply coordination via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998294 SKU: 6998294-Tungaloy Manufacturer SKU: TUN6998294 Model series: ISO‑standard turning inserts Material: Hartmetall Grade/coating: GT9530 Core data Corner radius: 0.8 mm Plate thickness: 2.38 mm Insert size: 06 (ISO) Clearance angle: 7° Included angle: 80° Special features Rhombic insert form (CCMT) Coated cermet cutting material Single‑sided chipbreaker Central hole with cylindrical bore + one‑sided countersink (40°–60°) For external and internal turning of steel ISO‑compliant geometry for compatibility with standard holders FAQ What materials is this insert suited for? The CCMT060208 GT9530 insert is designed primarily for machining steel; the GT9530 coated cermet offers improved wear resistance and surface finish in finishing to light universal turning operations. How does the chipbreaker influence performance? The single‑sided chipbreaker on this Tungaloy indexable turning insert promotes consistent chip control and contributes to stable cutting conditions, which helps maintain surface quality during longer runs. What seating and clamping features ensure repeatability? The rhombic CCMT form combined with the central hole and the 40°–60° countersink provides secure, repeatable clamping in ISO holders and boring bars suitable for the CCMT geometry. Is the 0.8 mm corner radius suitable for all finishing tasks? A 0.8 mm corner radius is optimised for fine finishes and light general turning; heavier roughing operations may require a different radius or insert geometry. Which product codes identify this item for ordering? The item is listed as CCMT060208 GT9530 with article number 6998294 and SKU 6998294‑Tungaloy for stock and order enquiries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 GT9530 Wendeplatten - Tungaloy
Take advantage of the wear-resistant GT9530 grade and the ISO CCMT geometry to achieve durable finishing and reliable tool life under stable turning conditions. The rhombic form with a 0.8 mm corner radius and single-sided chipbreaker ensures good surface finish and predictable chip control. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility. CCMT 060208 GT9530 Tungaloy indexable insert for turning — coated cermet, 0.8 mm radius CCMT060208 GT9530 is an ISO-standard rhombic indexable insert designed for precision external and internal turning, providing a balance between surface finish and tool life Wear-resistant GT9530 coated cermet ISO CCMT 06 geometry, 80° included angle 0.8 mm corner radius for fine finishes Cylindrical hole with single-side countersink Consistent clampability and repeatable geometry for reliable turning The ISO CCMT060208 geometry delivers a familiar platform for quick changeover between holders and makes tool life more predictable in production. The rhombic plate form combined with the 80° included angle and a 7° clearance angle gives a stable contact area and reduces deflection during light to medium cuts. The cylindrical hole with a single-side countersink (40°–60°) ensures secure fastening and simple indexing; as a result, downtime for regripping is reduced and fixture checks are easier to schedule. With an insert thickness of 2.38 mm, the plate provides sufficient rigidity for finishing passes while remaining easy to seat in standard ISO-compatible toolholders. Grade and coating engineered for finishing with extended life The GT9530 grade is a coated cermet developed for wear resistance in finishing to light universal turning operations under stable conditions. Its composition and coating aim to combine a fine cutting edge with improved oxidation resistance, which helps achieve a consistent surface finish across multiple workpieces and extends cutting intervals between changes. The 0.8 mm corner radius is optimised to produce fine surfaces without sacrificing edge life, making this insert suitable where high-quality finishes and longer tool life are priorities. The single-sided chipbreaker promotes predictable chip flow on typical steel alloys, so the machining cycle can run with fewer interruptions for chip clearance. Practical selection and application guidance for workshop planners Selection of this insert should consider holder form, free angle, and tolerance class so that clamping and orientation match the ISO geometry and hole style. The CCMT designation signals compatibility with many common external holders and boring bars, provided the holder supports a 06 size plate and the clamp or screw type aligns with the plate’s countersink profile. For turning operations that prioritise finish over heavy metal removal, this indexable plate performs reliably on stable set-ups and consistent feeds, yielding both process stability and economic benefits through reduced insert changes and rework. For unusual materials or interrupted cuts, choose a chipbreaker and grade aligned to the workpiece and machining stability. For application-specific advice or to request the Tungaloy CCMT060208 GT9530 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised guidance and fast delivery Technical data Article number: 6998286 Manufacturer SKU: TUN6998286 SKU: 6998286-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Plate size: 06 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Grade: GT9530 (coated cermet) Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical with single-side countersink (40°–60°) ISO designation: CCMT060208 FAQ What applications suit this insert best? This CCMT060208 GT9530 insert is intended for finishing to light universal turning on steel under stable conditions, where high surface quality and extended tool life are required. Is the insert compatible with standard CCMT holders? Compatibility depends on holder form, free angle and clamping method; the CCMT geometry and the cylindrical hole with countersink match most ISO CCMT external holders when the clamping profile is compatible. How does the GT9530 grade influence performance? The GT9530 coated cermet grade is engineered to offer wear resistance and a fine cutting edge, improving surface finish and extending intervals between indexings in finishing applications. Which chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip flow for continuous turning and helps maintain stable cutting conditions on common steel grades during finishing passes. Can the insert be used for internal boring as well as external turning? Yes — the rhombic geometry and secure clamping make the insert suitable for both external and internal turning where the holder supports the CCMT plate and the machining conditions remain stable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of GT9530 coated cermet performance, consistent ISO compatibility and a fine 0.8 mm corner radius for reliable finishing and extended tool life; order via Metav Werkzeuge or consult the technical team for application support. CCMT060208 GT9530 Tungaloy turning insert (coated cermet, 0.8 mm radius) The CCMT060208 GT9530 is an ISO-format rhombic turning insert designed for finishing to light general-purpose turning of steel, offering a wear-resistant coated cermet grade and stable chip control for productive machining. Coated cermet GT9530 for long tool life ISO CCMT rhombic insert, size 06 0.8 mm corner radius for fine finishing With cylindrical hole + one-sided countersink Consistent finishes and longer tool life through GT9530 technology The grade supplied, GT9530, is a coated cermet formulated to combine low wear with excellent surface integrity in stable turning conditions. Cermet combines ceramic and metallic binders to give a harder cutting edge than standard carbide, which results in improved surface finish and reduced flank wear during finishing passes. In practical terms, this means fewer reworks and longer periods between insert changes, supporting higher throughput and lower per-part tooling cost. The controlled toughness of the grade helps avoid premature chipping in steady, well-fixtured setups. Predictable clamping and ISO compatibility for easy tool integration The insert follows the ISO CCMT geometry and sizing conventions, so compatibility with holders is determined by shape, clearance angle and thickness as expected in industrial tool systems. Key measured characteristics are an included angle of 80°, a clearance angle of 7° and a plate thickness of 2.38 mm, all of which influence clamping stability and cutting engagement. The presence of a cylindrical hole with a one-sided countersink (40°–60°) ensures secure retention in seat-mounted holders and contributes to repeatable axial and radial positioning. Using an appropriately specified holder and a correctly matched clamping kit enables predictable cycle times and consistent part geometry. Application advice: choosing chipbreaker and process parameters This insert is intended primarily for external and internal turning where a fine finish is required on steel; select the single-sided chipbreaker to suit the cut depth and material batch. For finishing passes at modest depths of cut, the 0.8 mm corner radius balances edge strength with the ability to generate the smooth surface expected in precision components. In higher-stability setups, feed and speed can be increased compared with uncoated ceramic tips, while maintaining acceptable tool life. The rhombic CCMT form supports a range of approach angles and can be used in light shoulder work and profiling with suitable holder geometry. For mixed operations or marginal fixturing, match the chipbreaker style and consider reducing feed to preserve edge integrity. Practical benefits for production workflows Adopting this coated cermet insert in series production reduces downtime related to insert changes and post-process finishing. The single-sided chipbreaker helps manage chip flow in common turning operations, aiding machine cleanliness and operator safety. Because the insert is ISO-compliant, stock control and replacement procedures are simplified across multiple machines and toolsets. When surface finish and repeatability are priorities, the combination of GT9530 grade and the specified geometry supports consistent results, lowering scrap rates and stabilising downstream processes. For reliable finishing with extended tool life, contact Metav Werkzeuge for tailored application advice and to place orders; the Metav team can assist with holder selection and process parameter recommendations Technical Data Article number: 6998299 Manufacturer SKU: TUN6998299 SKU: 6998299-Tungaloy Designation: CCMT060208 GT9530 Tungaloy insert Facts Insert size: 06 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: GT9530 Cutting material: coated cermet Shape: rhombic (CCMT) Chipbreaker: single-sided Intended use: Turning — finishing to light universal on steel Series: ISO turning indexable inserts (ISO-format CCMT) FAQ What materials is this insert best suited for? The CCMT060208 GT9530 Tungaloy insert is optimised for machining steel in finishing and light universal applications, where its coated cermet grade improves surface quality and wear resistance. How does the GT9530 coating benefit production runs? The GT9530 coating increases resistance to abrasive wear and stabilises flank wear rates, which extends insert life and reduces tool-change frequency in stable production setups. Which holders are compatible with this CCMT insert? Compatibility depends on holder geometry and clamping specification; the insert follows ISO CCMT form and requires a holder matching the 06 size, 2.38 mm thickness and the central hole with countersink for secure fixation. Can this insert be used for internal and external turning? Yes, the rhombic geometry and single-sided chipbreaker make the insert suitable for both external and internal turning in finishing applications, provided appropriate holder clearance and rigidity are ensured. What is the purpose of the 0.8 mm corner radius? The 0.8 mm corner radius delivers a compromise between edge strength and fine surface formation, helping to reduce microchatter and improve finish without sacrificing durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of consistent surface quality, extended tool life under stable conditions and precise ISO compatibility for reliable turning operations; order with expert advice via Metav Werkzeuge or request tailored recommendations from the consultancy team. CCMT060208 GT9530 Tungaloy turning insert — coated cermet, 0.8 mm nose radius The CCMT060208 GT9530 is an ISO-format rhombic turning insert optimised for finishing and light universal turning of steel components. Rhombic ISO CCMT geometry Coated cermet GT9530 grade 0.8 mm nose radius for fine finishing Cylindrical hole with single-sided countersink 40°–60° High-precision finishing with lasting wear resistance The CCMT060208 comes in a coated cermet grade (GT9530) developed for wear resistance and a superior surface finish on steel. Cermet combines ceramic and metallic constituents to provide a hard, abrasion-resistant cutting edge while maintaining enough toughness to avoid premature chipping during steady operations. The 0.8 mm nose radius supports fine contouring and improved micro-geometry, which translates into fewer rework passes and a reliable part appearance. For shops aiming to reduce non-productive time, the result is a measurable reduction in changeovers and consistent part quality when machining under stable set-up conditions. Secure clamping and straightforward holder compatibility Designed as an ISO CCMT060208 insert with a rhombic outline and a through-hole plus a single-sided countersink (40°–60°), the insert fits standard CCMT-compatible external holders and boring bars. Compatibility to a specific holder is determined by form, 7° relief angle, tolerance class, fastening method, size and 2.38 mm plate thickness. The system typically consists of the ISO insert, a matching external holder or boring bar, a shim/clamp set and spare screws for quick replacement. These mechanical details ensure repeatable seating and concentricity, supporting stable cutting conditions and predictable tool life. Efficiency and process reliability in steel turning The GT9530 grade is optimised as a wear-resistant finishing to light universal option for steel, offering a balance between tool life and surface quality. With a single-sided chipbreaker, chip control can be matched to the workpiece, machining type and stability of the set-up. Choosing the correct chipbreaker and grade for the application reduces heat build-up and lowers the risk of built-up edge, which in turn keeps cycle times steady and the process more productive. This insert is particularly suited to operations where surface integrity and reduced downtime are priorities, delivering an economical solution for medium- to high-volume finishing tasks. Practical recommendations for integration When integrating this ISO-format insert into existing tooling, verify holder compatibility with the CCMT060208 form and check for the correct clamp and screw set to secure the insert reliably. For best results, programme modest feed rates for finishing passes to exploit the 0.8 mm nose radius and secure the part to minimise vibration. The coated cermet substrate performs best under stable cutting conditions; where stability cannot be guaranteed, consider grades optimized for tougher interrupted cuts. For specific application parameters and cutting data, Metav Werkzeuge can provide tailored guidance to optimise the insert for the intended operation. For tailored recommendations or to source the CCMT060208 GT9530 insert from Tungaloy, contact Metav Werkzeuge for application advice and order support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical data Article number: 6998304 SKU: 6998304-Tungaloy Manufacturer SKU: TUN6998304 Manufacturer: Tungaloy Key measurements ISO designation: 060208 Size: 06 Included angle: 80° Relief angle: 7° Nose radius: 0.8 mm Plate thickness: 2.38 mm Special features Coating/grade: GT9530 (coated cermet) Shape: rhombic CCMT Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Material: cemented carbide Typical application: turning — finishing to light universal for steel FAQ What materials is this insert intended for? The CCMT060208 GT9530 insert is intended primarily for machining steel; the GT9530 coated cermet grade is optimised for wear resistance and improved surface finish when used under stable conditions. How is the insert mounted in a holder? The insert is mounted in CCMT-compatible external holders or boring bars that match the ISO CCMT060208 geometry; correct seating relies on matching form, tolerance, clamp or screw method, and the 2.38 mm plate thickness. Which chipbreaker should be selected for this grade? Select a chipbreaker that corresponds to the workpiece, type of cut and set-up stability; the CCMT060208 is supplied with a single-sided chipbreaker and performs best with chip control tuned to finishing operations. Can this insert be used for internal turning? Yes — the ISO-format CCMT geometry and the 7° relief angle allow use in both external and internal turning holders that accept CCMT inserts. What are the identifying codes to order this insert? Order using the article number 6998304, SKU 6998304-Tungaloy, or the ISO designation CCMT060208 GT9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the ISO CCMT form for consistently improved surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CCMT 060208 NS9530 Tungaloy turning insert — finishing cermet for precision turning CCMT 060208 NS9530 Tungaloy turning insert is an ISO CCMT-format insert designed for precision external and internal turning in steel; optimised for continuous cuts and small depths of cut Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces ISO CCMT form with 7° relief Cylindrical hole with single-side countersink Delivering superior finishes with low cutting forces The NS9530 uncoated cermet grade is formulated for finishing applications in steel, providing a sharp cutting edge that reduces cutting forces and promotes a finer surface finish. As a dedicated finishing grade, the insert excels in continuous cutting and small depths of cut where stable chip flow and repeatable surface quality are required. The combination of edge integrity and material composition results in longer intervals between edge changes on stable setups, supporting higher throughput without sacrificing component appearance. Reliable mounting and ISO compatibility for reproducible results Supplied in the ISO CCMT geometry, the insert is compatible with holders that match the insert's form, 7° relief, tolerance class, clamping method, size and thickness. This standardised fit ensures consistent seat contact and repeatable positioning, which translates directly into predictable machining tolerances and reduced setup time. Using a matched external holder or boring bar together with the recommended shim and clamping set secures the insert and helps maintain cutting stability throughout longer production runs. Design choices that reduce chip issues and ease handling The insert features a single-sided chipbreaker, a 0.8 mm corner radius, and a cylindrical hole with single-side countersink (40°–60°) to simplify clamping and improve chip evacuation in finishing operations. The plate thickness of 2.38 mm and the insert’s geometry provide the required rigidity for fine-turning tasks while keeping cutting forces modest. These design elements collectively lower vibration susceptibility and contribute to consistent surface integrity, making the insert suitable for precision components where visual and dimensional quality are priorities. Contact Metav Werkzeuge to discuss the suitability of the Tungaloy CCMT060208 NS9530 finishing insert for specific turning applications; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998435 SKU: 6998435-Tungaloy Manufacturer SKU: TUN6998435 Designation: CCMT060208 NS9530 Tungaloy insert Facts ISO designation: 060208 Corner radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Included angle: 80° Size: 06 Special features Uncoated cermet grade NS9530 Finishing grade for steel Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO CCMT form for standardised clamping Compatible with ISO holders depending on form, relief, tolerance, clamping, size and thickness System: insert + matching external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert best suited for? The CCMT 060208 NS9530 Tungaloy insert is optimised for finishing in steel and delivers low cutting forces and high surface quality when used for continuous cuts. How does the NS9530 grade influence performance? The NS9530 uncoated cermet provides a sharp edge and good wear resistance for finishing; with the CCMT geometry it supports stable cuts and improved surface finishes. Which holders are compatible with this insert? Compatibility depends on matching the ISO CCMT form, the 7° relief, tolerance class, clamping method, size and thickness; the insert suits holders designed for CCMT inserts. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with single-side countersink (40°–60°) simplifies secure clamping and alignment in the seat, aiding repeatable positioning and chip flow control. Can this insert be used for internal as well as external turning? Yes, the CCMT 060208 NS9530 Tungaloy insert is suitable for both external and internal turning provided the selected holder and setup match the insert’s geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision finishing solution that combines a sharp cermet cutting edge with a 0.8 mm corner radius for superior surface quality and reduced cutting forces; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 060208 NS9530 — ISO indexable turning insert, uncoated cermet by Tungaloy CCMT 060208 NS9530 is a compact ISO turning insert designed for finishing operations on steel, offering a sharp edge geometry and stable performance in continuous cuts. Uncoated cermet for fine finishing Sharp cutting edge reduces cutting forces ISO CCMT 060208, rhombic profile Suitable for continuous cuts and small depths Exceptional surface finish for finishing turns The insert is manufactured from an uncoated cermet grade (NS9530) that provides a sharp cutting edge and consistently low cutting forces. This combination is ideal for producing high surface quality on steel workpieces during external and internal turning. For processes involving continuous cutting or small depths of cut, the material and geometry support longer intervals between edge changes and fewer rework steps, which helps to keep production stable and predictable. Geometry and fit that ensure repeatable clamping Thanks to the rhombic shape and ISO conformity, the insert matches standard holders when shape, relief angle (7°), tolerance class, clamping and thickness are compatible. The 80° included angle and 0.8 mm corner radius deliver a defined contact zone that reduces vibration and improves dimensional consistency. Where holders require a locating hole, this insert is supplied with a hole and a cylindrical hole plus single‑side countersink (40°–60°) for secure fastening and correct seating. Process benefits: efficiency and predictability The combination of cermet substrate and acute cutting geometry produces low cutting forces and a gentle cutting action, which reduces tool‑holder load and vibration. For production environments focused on part quality and throughput, this results in fewer rejects and more consistent cycle times. The insert’s one‑sided chipbreaker is tuned for continuous chips typical of finishing cuts, promoting reliable chip flow and reducing the risk of surface damage. Practical selection and integration guidance When selecting an insert for finishing steel, consider the interaction of feed, depth of cut and cutting speed: this finishing grade excels at modest feeds and shallow depths where surface finish is critical. The insert thickness (2.38 mm) and standard 06 size make it compatible with common ISO turning holders; final compatibility is determined by holder form and clamping system. For best outcomes, pair the insert with a holder that supports the 7° relief and the specified hole style to ensure repeatable clamping and optimal cutting geometry. For finishing operations that demand consistent surface quality, choose Tungaloy quality — contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6998433 SKU (seller): 6998433-Tungaloy Manufacturer SKU: TUN6998433 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Nose radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Insert size: 06 Included angle: 80° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Cutting material: cermet (uncoated) Chipbreaker: one-sided Shape: rhombic Intended use: turning (external and internal) Compatibility: ISO insert — fit depends on holder form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert intended for? The NS9530 grade is formulated for finishing operations on steel; the CCMT 060208 NS9530 insert delivers a sharp edge and low cutting forces tailored to steel machining. Which holder features are required for correct fitment? Fitment depends on holder shape, the 7° relief angle, tolerance class, clamping method, insert size and thickness; the insert is ISO‑conformant for standard CCMT pockets. How does the uncoated cermet compare to coated grades? Uncoated cermet like NS9530 offers a sharper edge and better surface finish in finishing cuts compared with many coated grades, particularly for continuous cuts and small depths of cut. Is the insert suitable for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning tasks when matched with the appropriate holder and machining parameters. What is the purpose of the countersunk hole style? The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and correct seating in holders that use a screw and clamp arrangement Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing‑grade uncoated cermet and precise geometric control for consistent surface quality and low cutting forces; the compact rhombic design with a 0.8 mm corner radius ensures reliable finishing on steel components. Order the insert directly via Metav Werkzeuge or consult our specialists for selection support. CCMT060208 NS9530 Tungaloy turning insert — finishing uncoated cermet, rhombic ISO insert The CCMT060208 NS9530 Tungaloy turning insert is an ISO‑standard rhombic insert for external and internal turning, designed as a finishing grade for steel with a sharp cutting edge and one‑sided chipbreaker. ISO‑standard rhombic insert CCMT 060208 Finishing-grade uncoated cermet NS9530 Sharp cutting edge for low cutting forces Cylindrical hole with single‑side countersink Faster, cleaner finishing for steel turning operations The uncoated cermet grade NS9530 is formulated for finishing operations on steel where a sharp cutting edge and minimal cutting forces are critical. The combination of the cermet cutting layer and the insert geometry reduces rubbing and smearing at the tool edge, which directly improves surface integrity and lowers the need for secondary finishing. In practice, this means fewer rejected parts and more consistent cycle times when performing continuous cuts with small depths of cut. The result is a measurable efficiency gain in production without sacrificing surface quality. Geometry engineered for repeatability and secure clamping Built to the ISO form CCMT 060208, the insert features an 80° included angle, a 7° clearance, a 0.8 mm corner radius and a plate thickness of 2.38 mm, all of which support stable seating in standard toolholders. The cylindrical hole with single‑side countersink (40°–60°) ensures positive locating and secure fastening, which minimises micro‑movement and runout during turning. These geometric parameters are decisive for repeatable part tolerances and extended tool life when paired with a matched holder and clamping set. Controlled chips and simple integration into tooling systems The one‑sided chipbreaker provides predictable chip formation in finishing cuts, promoting safe evacuation and reducing the risk of built‑up edge. Selection of the chipbreaker and grade should align with workpiece material, cutting parameters and machine stability to achieve optimal results. Integration is straightforward: the ISO insert assembles with a compatible external holder or boring bar, plus a shim/clamp set and spare screws for maintenance. This makes the insert easy to adopt into existing turning setups and flexible for both external and internal turning tasks. For precision finishing on steel components, request the CCMT060208 NS9530 Tungaloy turning insert from Metav Werkzeuge for immediate availability and tailored selection advice — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6735897 Manufacturer SKU: TUN6735897 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Relief (clearance) angle: 7° Plate thickness: 2.38 mm Insert size: 06 Included angle: 80° Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: rhombic Chipbreaker: one‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Suitable applications: external and internal turning; finishing operations on steel System components: ISO insert, matching external holder or boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for finishing steel parts? Yes. The CCMT060208 NS9530 Tungaloy insert is a finishing‑grade, uncoated cermet formulated for steel finishing where a sharp edge and low cutting forces produce superior surface finish. Which holders are compatible with this ISO insert? Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness; use holders specified for CCMT inserts and ensure the holder matches the 2.38 mm thickness and cylindrical hole location. Is the cutting material coated? No. This grade is an uncoated cermet offering a sharp edge and stable performance in continuous finishing cuts. What are the key geometric values to consider? Corner radius 0.8 mm, clearance angle 7°, plate thickness 2.38 mm and an 80° included angle are the main dimensions that determine seating and cutting behaviour. How does the chipbreaker influence performance? The one‑sided chipbreaker promotes controlled chip formation in finishing passes; selecting the correct chipbreaker and grade according to material and machining stability improves surface quality and process reliability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that combines a sharp uncoated cermet cutting edge, low cutting forces and ISO compatibility to secure consistent surface quality and efficient cycle times; order the CCMT060208 NS9530 turning insert via Metav Werkzeuge or request application advice from the consultants. CCMT060208 NS9530 Tungaloy indexable turning insert — uncoated cermet for turning The CCMT060208 NS9530 is an ISO rhombic turning insert designed for precision finishing of steel, offering a sharp cutting edge and low cutting forces for continuous cutting and small depths of cut. ISO rhombic indexable insert 80° Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing One-sided chipbreaker with countersunk hole High-quality finishing for steel components The NS9530 grade is an uncoated cermet specifically formulated as a finishing grade for steel, delivering a high surface finish with low built-up edge tendencies. Its combination of a sharp cutting edge and a cermet matrix enables clean shearing at small depths of cut, which reduces the need for secondary operations. For machinists seeking predictable, repeatable part finish, this finishing insert provides a measurable improvement in surface integrity while maintaining excellent dimensional control on turned workpieces. Reduced cutting forces for smoother machining A sharp edge geometry and cermet microstructure result in low cutting forces, which reduces tool load and vibration during light finishing passes. Lower forces translate into better process stability and allow for higher feed rates in continuous cutting, improving throughput without sacrificing surface quality. The one-sided chipbreaker supports consistent chip formation, keeping chips compact and the cutting zone clear, which helps to maintain cycle stability in automated turning cells. Seamless integration into ISO turning systems Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness; this insert is ISO-specified as CCMT060208 and features an 80° rhombic form with a 7° clearance angle. The plate thickness of 2.38 mm, a corner radius of 0.8 mm and a centre hole with a cylindrical bore plus one-sided countersink (40°–60°) ensure reliable clamping in standard external holders, along with the usual underlay, clamp set and replacement screws. Clear matching of these dimensions to the chosen holder secures repeatable seating and stable cutting conditions at every tool change. Consistent edge performance and economical machining Constructed on a robust carbide substrate with a cermet cutting layer, the insert provides durable edge life under finishing conditions while avoiding unnecessary coatings that can blunt a keen edge required for mirror finishes. The geometry and grade support consistent performance across batch production, reducing scrap and rework. Coupled with Tungaloy’s manufacturing tolerances and quality control, the insert is suited for shops prioritising surface quality and process reliability in turning operations. Contact Metav Werkzeuge for tailored application recommendations and to request CCMT060208 NS9530 Tungaloy finishing inserts; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6945208 Manufacturer SKU: TUN6945208 SKU: 6945208-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Measurements Corner radius: 0.8 mm Clearance angle: 7° Lead/approach angle: 80° Plate thickness: 2.38 mm Plate size: 06 Centre hole: with hole Special features Grade: NS9530 (uncoated cermet) Material substrate: carbide Plate form: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning ISO designation: CCMT060208 FAQ What materials is this insert intended for? The CCMT060208 NS9530 is a finishing grade formulated for steel and is optimised for continuous cuts and small depths of cut to achieve superior surface finish. Is the insert coated? The CCMT060208 NS9530 is an uncoated cermet insert; this uncoated design helps maintain a very sharp cutting edge for fine finishing tasks. How is holder compatibility ensured? Compatibility depends on matching insert form, clearance angle, tolerance class, fastening method, size and thickness; check that the holder supports an ISO CCMT060208 rhombic plate with 7° clearance and 2.38 mm thickness. What chip control does the insert provide? The insert is supplied with a one-sided chipbreaker, which promotes compact chip formation during finishing passes. What is the manufacturer SKU and article number? The article number is 6945208 and the manufacturer SKU is TUN6945208 for this Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet NS9530 insert with a 0.8 mm corner radius and a sharp cutting edge to achieve low cutting forces and superior surface quality in steel turning. The ISO-format design ensures compatibility with standard CCMT holders when form, clearance, tolerance class, fastening, size and thickness match. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 060208 NS9530 — Tungaloy CCMT060208 NS9530 turning insert for finishing A CCMT060208 NS9530 insert engineered for finishing operations in steel turning, offering low cutting forces and consistently fine surface finishes Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces Optimised for continuous cuts and fine finish ISO CCMT 060208 with 0.8 mm corner radius High-precision finishing for steel turning The uncoated cermet NS9530 is developed as a finishing grade for steel, providing a sharp cutting edge and reduced cutting forces that translate directly into a better surface texture. Because the material promotes stable machining at light feeds and small depths of cut, the result is a consistently high-quality external or internal turning face. The ISO geometry and rhombic form are standardised to simplify toolholder selection and to ensure repeatable seating and clamping for predictable results. Predictable chip control and holder compatibility The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match common clamping systems; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The one-sided chipbreaker design supports continuous cutting conditions typical for finishing passes, reducing vibration and improving dimensional stability. Specifying the correct chipbreaker and grade for the workpiece material and machining conditions ensures reliable chip behaviour and longer productive tool life. Workshop benefits: efficiency and surface quality Using a dedicated finishing grade reduces rework and inspection effort: lower cutting forces lessen spindle load and tool deflection, while the cermet cutting edge helps achieve a superior finish straight off the machine. This results in fewer downstream operations and increased process efficiency. The compact plate thickness and standardised format enable quick index changes and straightforward inventory management for series production or small-batch runs. Selection and integration guidance for machinists For best results, pair the plate with a matching ISO CCMT holder and check the holder’s clearance and tolerance class before assembly. The insert’s 7° clearance angle and 0.8 mm corner radius suit light finishing depths; a rigid setup and appropriate cutting parameters will exploit the grade’s strengths in continuous cuts. If application details are uncertain, technical consultation can help define the optimal chipbreaker and cutting data to match workpiece steel and required surface integrity. For finishing steel turning applications the Tungaloy NS9530 cermet insert is recommended — contact Metav Werkzeuge for availability and tailored cutting-data advice. Technical data Article number: 6998420 Manufacturer SKU: TUN6998420 Stock SKU: 6998420-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 060208 Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Plate size: 06 Special features Uncoated cermet grade NS9530 One-sided chipbreaker Rhombic plate form (CCMT) With hole: cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO holders depending on form, clearance, tolerance class, fastening, size and thickness FAQ What machining tasks is this insert suited to? The CCMT060208 NS9530 Tungaloy turning insert is intended primarily for finishing operations in steel turning, especially continuous cuts and small depths of cut where a fine surface finish is required. How does NS9530 differ from standard carbide grades? NS9530 is an uncoated cermet finishing grade that offers a sharper cutting edge and lower cutting forces than many conventional carbide grades, which helps to improve surface quality during finishing passes. Can this insert be used for internal as well as external turning? Yes, the ISO CCMT geometry and rhombic form make the insert suitable for both external and internal turning when the correct holder and rigour of setup are observed. What should be checked before mounting the insert? Verify holder compatibility with the CCMT form, the 7° clearance angle, tolerance class and fastening method; ensure the clamping and seat dimensions match the ISO specification. Is a coated version available for different applications? This specific SKU is an uncoated cermet NS9530; for other coatings or grades, consult Metav Werkzeuge to select an alternative suited to different materials or cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet finishing grade and the ISO CCMT form for predictable, low-force turning of steel; order directly via Metav Werkzeuge or consult their specialists for application guidance. CCMT 060208 NS9530 — indexable turning insert, uncoated cermet finishing grade (Tungaloy) A CCMT 060208 NS9530 indexable insert engineered for precision external and internal turning of steel, optimised for continuous finishing cuts. ISO CCMT shape, compatible with standard holders Uncoated cermet NS9530 for superior surface finish Sharp cutting edge for low cutting forces Single-sided chipbreaker with centred hole and countersink Predictable finishing performance with low cutting forces The uncoated NS9530 cermet is a finishing grade developed for low cutting forces and an exceptionally fine surface finish on steel. Its inherently sharp edge reduces built-up edge and cutting resistance during small depth passes, which helps to minimise secondary machining and polishing. The result is a more consistent part finish and reduced cycle variation for production runs where surface quality is decisive. ISO compatibility that simplifies tool changeovers This CCMT-form insert follows ISO norms, so fitment depends on geometry, relief angle and size rather than proprietary interfaces. Key dimensions such as the 7° relief angle, 2.38 mm thickness and 0.8 mm corner radius ensure stable clamping and repeatable seating in standard CCMT holders. The rhombic plate with a central hole and cylindrical hole plus one-sided countersink (40°–60°) supports secure fastening and straightforward indexability for rapid tool changes. Controlled chips and steady process behaviour for finishing cuts Equipped with a single-sided chipbreaker, the insert is optimised for continuous cuts and small feed rates common in finishing operations. Chip control is tuned to produce manageable swarf without disturbing the machined surface, which reduces interruptions and the need for manual intervention. Selecting this chipbreaker and grade supports a steady, predictable machining process across similar batches of steel components. Operational benefits for the workshop Standardised ISO form and a dedicated finishing grade translate directly into predictable performance and simpler inventory management. The insert’s design reduces rework and inspection time by delivering consistent surface quality, while the robust geometry supports reliable repeatability across batches. For shops aiming to streamline turning operations, this combination enhances productivity without complex setup changes. For reliable finishing in steel turning, request a quote or application advice for Tungaloy CCMT 060208 NS9530 inserts from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Manufacturer article number: 6945217 SKU: 6945217-Tungaloy Designation: CCMT060208 NS9530 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Included angle: 80° Corner radius: 0.8 mm Relief angle: 7° Thickness: 2.38 mm Size: 06 Special features Rhombic plate form (CCMT) With hole; cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Uncoated cermet grade NS9530 Designed for external and internal turning ISO-compatible CCMT form for standard holders FAQ Is this insert suitable for finishing steel components? The CCMT 060208 NS9530 insert (Tungaloy, SKU 6945217-Tungaloy) is a finishing-grade, uncoated cermet designed specifically for steel applications and continuous finishing cuts. Which toolholders are compatible with this insert? Compatibility is determined by shape, relief angle, tolerance class, clamping method, size and thickness; holders compatible with ISO CCMT 06 inserts will accept this form when the clamping and tolerance match. What chip control does the insert provide? A single-sided chipbreaker is integrated to support controlled swarf formation in continuous cuts, improving surface integrity and reducing interruptions. Can the insert be used for internal as well as external turning? Yes, the geometry and grade are suitable for both external and internal turning operations when machine rigidity and setup stability are appropriate. Is the cutting material coated? The cutting material is an uncoated cermet (NS9530), selected for a sharp edge and excellent surface finish in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
The product data contains contradictory information regarding the cutting material: one entry specifies cemented carbide while another specifies uncoated cermet, which creates confusion and makes it difficult to determine the accurate material used in the product. This inconsistency could lead to errors in the product description or miscommunication with customers, potentially impacting their purchasing decisions. To ensure the accuracy and reliability of the product description, it is essential to verify the source data thoroughly and resolve any discrepancies between the entries. Please review the original documentation or consult the relevant team to clarify and confirm the correct cutting material specification.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade cermet designed for low cutting forces and superior surface quality; the sharp edge and single-sided chipbreaker ensure consistent results in continuous turning operations. Order through Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT 060208 NS9530 turning insert (CCMT060208) — Tungaloy CCMT 060208 NS9530 is a rhombic ISO turning insert optimised for finishing steels in continuous cuts and small depths of cut Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces Rhombic CCMT shape, 7° clearance angle Single-sided chipbreaker, hole with countersink High-quality finishing for steel turning The NS9530 uncoated cermet grade is formulated as a finishing sort for steel, providing a sharp cutting edge that reduces cutting forces and helps achieve an excellent surface finish. This makes the insert well suited to continuous turning operations and small depth-of-cut scenarios where consistent dimensional control and minimal tool marks are required. Because the material is optimised for low forces, chatter susceptibility is reduced and stable cutting conditions are easier to maintain, improving process reliability on conventional and CNC lathes. Secure mounting and compatible holder systems The rhombic CCMT geometry and the insert’s mounting features allow straightforward integration into common external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the insert includes a cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems. With a clearance angle of 7° and an included corner radius of 0.8 mm, the geometry balances cutting-edge sharpness with sufficient edge strength. These details mean the insert can be seated and secured reliably, enabling predictable tool behaviour in series production. Productivity benefits and recommended applications This uncoated cermet finishing insert offers economical productivity for shops focused on high-quality finishes rather than heavy stock removal. The single-sided chipbreaker assists chip control in continuous cuts, while the corner radius 0.8 mm supports consistent profile transfer on external and internal turning passes. Choose this insert where surface quality and repeatability are priorities — for example, final passes on turned shafts, bearing journals or precision fit components. The combination of geometry, grade and mounting configuration supports efficient, repeatable processes across a broad range of steels. For precision finishing with a dependable cermet, specify Tungaloy CCMT 060208 NS9530 via Metav Werkzeuge; for technical advice or to confirm holder compatibility contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (manufacturer): 6998430 SKU: 6998430-Tungaloy Designation: CCMT060208 NS9530 Tungaloy insert Model series: ISO turning inserts Manufacturer: Tungaloy Facts Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.8 mm Insert angle: 80° Size: 06 Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Single-sided chipbreaker Rhombic (CCMT) insert shape Cylindrical hole with single-side countersink (40°–60°) Compatible with standard external holders and boring bars System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ Is this insert suitable for finishing operations on alloyed steels? The CCMT 060208 NS9530 insert is a finishing cermet optimised for steel; it is suitable for many alloyed steels where low cutting forces and superior surface finish are required. What mounting features does the insert offer for secure clamping? The insert has a cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems; the CCMT geometry and thickness ensure stable seating in appropriate holders. How does the NS9530 grade affect surface quality and tool life? NS9530 is an uncoated cermet finishing grade that produces a sharp cutting edge for improved surface quality and lower cutting forces; tool life depends on workpiece material and cutting conditions but the grade is designed for consistent finishing performance. Can this insert handle internal turning as well as external turning? Yes, the geometry and chip control characteristics make the insert suitable for both external and internal turning when matched with the correct holder or boring bar. Which corner radius is recommended for precision finishes? The CCMT 060208 comes with a corner radius of 0.8 mm, which balances edge strength and fine profile fidelity for precision finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T505 Wendeplatten - Tungaloy
Combining economical CVD-coated carbide grade T505 with precise geometry and proven chip control ensures productive turning of cast iron components; order the CCMT060208 T505 insert directly via Metav Werkzeuge or consult the advisers if needed. CCMT060208 T505 CCMT turning insert — CVD-coated carbide for turning | Tungaloy the CCMT060208 T505 indexable insert for ISO turning applications, designed for efficient machining of cast iron with optimised chip control CVD-coated carbide grade T505 Optimised for cast-iron turning Rhombic insert with 0.8 mm radius Cylindrical hole + countersink fit Precise chip control for economical cast-iron turning The CCMT060208 T505 insert combines a CVD-coated carbide substrate with an optimised one-sided chipbreaker, delivering consistent chip formation in interrupted and continuous cuts. The coating and grade selection make the insert particularly suited to machining cast iron, where stable chip evacuation reduces heat buildup and tool wear. As a result, machining cycles become more predictable and cost-effective while maintaining surface quality and dimensional stability. Geometry and mounting that ensure repeatable accuracy The rhombic plate form with an included angle of 80° and a 7° clearance angle provides stable engagement and positive seating in standard ISO holders. The insert’s cylindrical hole with a single-sided countersink (40°–60°) supports secure clamping and correct seating orientation, which is essential for repeatable results across batches. These geometric features simplify holder selection and reduce set-up variability in production environments. Robust edge life for higher productivity Manufactured from carbide and finished with a CVD treatment in grade T505, this indexable plate offers a robust cutting edge and long tool life in demanding turning operations. The combination of substrate and coating promotes stable flank wear behaviour and helps to sustain cutting performance under higher cutting speeds typical of productive turning strategies. The outcome is improved uptime and fewer insert changes during shifts. Simple integration into ISO systems and informed grade choice The insert is part of an ISO system: an ISO turning plate, a matching external holder or boring bar, and the appropriate clamping set and screws form the complete tool system. Selection of the one-sided chipbreaker and the T505 grade should be guided by workpiece stability, interruption in the cut and the intended cutting speed. With a 0.8 mm corner radius and a 2.38 mm plate thickness, the insert balances strength and versatility for a range of finishing and semi-finishing turning tasks; system compatibility is determined by shape, clearance, tolerance class, fastening method, size and thickness. For robust, economical turning of cast iron choose the Tungaloy CCMT060208 T505 insert and contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6831836 SKU: 6831836-Tungaloy Manufacturer SKU: TUN6831836 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size designation: 06 ISO designation: 060208 Special features Material: carbide Coating / grade: CVD-coated, T505 Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning; selection by material and stability System composition: ISO insert, matching external holder/boring bar, clamping set and screws FAQ What materials is this insert best suited for? The CCMT060208 T505 insert is optimised for machining cast iron; the CVD-coated T505 grade and chipbreaker geometry promote stable chip control and long edge life when turning such materials. Which holders are compatible with this ISO insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT060208 form is compatible with standard ISO external holders and boring bars designed for CCMT plates. What are the key dimensional values to consider when ordering? Key values include the 0.8 mm corner radius, 2.38 mm plate thickness, 7° clearance angle and the ISO code 060208; these determine seating, strength and intended cutting conditions. How does the chipbreaker affect machining performance? The one-sided chipbreaker on this plate controls chip shape and evacuation, reducing heat concentration and improving tool life during external and internal turning operations. Can this insert handle interrupted cuts? Yes; with the robust carbide substrate and CVD coating in grade T505, the plate is suitable for applications with moderate interruptions, provided holder stability and cutting parameters are adjusted accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T5115 Wendeplatten - Tungaloy
Combining ISO compatibility with a CVD‑coated carbide T5115 grade and a 0.8 mm corner radius, this insert delivers controlled chip formation and reliable edge stability for cast iron turning; order directly via Metav Werkzeuge or consult their specialists for application matching. CCMT 060208 T5115 — Turning insert (rhombic, 80°) by Tungaloy The CCMT060208 T5115 is an ISO‑standard rhombic turning insert for external and internal turning, optimised for cast iron with a CVD‑coated carbide grade that balances wear resistance and cutting‑edge robustness. ISO rhombic insert, 80° geometry CVD‑coated carbide grade T5115 Optimised for cast iron machining 0.8 mm corner radius for controlled cuts Consistent machining performance for cast iron components The CVD‑coated carbide grade T5115 provides a balanced combination of wear resistance and edge stability that supports steady production runs on cast iron. The chemical vapour deposition (CVD) process applies a hard, wear‑resistant layer that reduces flank wear and extends tool life under intermittent cutting conditions. For operations requiring repeatable dimensional accuracy, the robust coating and substrate pairing minimise the frequency of insert changes, contributing to improved process efficiency and lower tool change downtime. Secure seating and precise geometry for reliable clamping Adherence to the ISO designation ensures predictable compatibility when pairing the insert with matching holders and boring bars. The rhombic shape with an 80° main cutting angle and a 7° clearance angle supports conventional holder geometries and offers versatility between roughing and finishing passes. The insert’s hole configuration — a cylindrical hole with a one‑sided countersink (40°–60°) — facilitates rigid clamping and stable torque transmission. Clear information on form, clearance angle, tolerance class, clamping method, size and thickness helps select the appropriate toolholder without trial and error. Geometry and chip control tailored to surface quality and tool life A 0.8 mm corner radius strikes a practical compromise between edge strength and surface finish: larger radii increase stability during interrupted cuts, while smaller radii favour fine finishing; the chosen radius suits mixed‑duty turning where both attributes are required. The single‑sided chipbreaker assists in shaping chips and reducing entanglement, which is particularly beneficial when machining brittle materials such as cast iron. The 2.38 mm plate thickness and the ISO size 06 format deliver mechanical stiffness and repeatable seating in standard clamping systems, supporting consistent cutting forces and predictable component quality. For technical advice on integrating the Tungaloy CCMT060208 T5115 insert into a production process and for procurement support quoting SKU 6864767-Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864767-Tungaloy Manufacturer SKU: TUN6864767 Manufacturer article number: 6864767 Model series: ISO turning inserts Facts Geometry angle: 80° Insert size: 06 ISO designation: 060208 Corner radius: 0.8 mm Clearance angle: 7° Thickness: 2.38 mm Special features Material: carbide Coating: CVD Grade: T5115 Shape: rhombic Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: external and internal turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The CCMT060208 T5115 insert from Tungaloy (SKU 6864767‑Tungaloy) is optimised for cast iron machining, offering a carbide substrate and a CVD coating that together provide balanced wear resistance and edge stability for grey and nodular cast irons. How does the CVD coating affect tool life and performance? A CVD‑coated carbide like the T5115 reduces flank wear and improves thermal resilience; the coating increases abrasive resistance and helps maintain a stable cutting edge, which extends service intervals and supports consistent part quality when the insert is used in turning operations. Which holder characteristics are required for correct fitting? Correct compatibility depends on holder form, relief (clearance) angle, tolerance class, clamping method, insert size and thickness. The rhombic ISO 060208 form and the cylindrical hole with countersink require a holder designed for 80° geometry and secure screw or clamp seating. Is this insert suitable for finishing passes? With a 0.8 mm corner radius and a single‑sided chipbreaker, the insert is suitable for mixed‑duty applications; it can be used for semi‑finishing and some finishing operations, provided cutting parameters and machine stability are adequate. What benefits does the single‑sided chipbreaker provide? The single‑sided chipbreaker guides chip formation and reduces the risk of long, stringy chips. For brittle workpieces such as cast iron, this improves chip evacuation and reduces the likelihood of surface scratching or part rework. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T515 Wendeplatten - Tungaloy
Benefit from economical CVD‑coated carbide T515, ISO CCMT geometry and a 0.8 mm corner radius for productive cast‑iron turning with stable chip formation; order the CCMT060208 insert via Metav Werkzeuge or contact the consultants for tailored advice. CCMT 060208 T515 — ISO turning insert for cast‑iron, Tungaloy A CCMT060208 T515 turning insert designed for economical and productive external and internal turning of cast iron. CVD-coated carbide grade T515 Rhombic CCMT geometry, 80° lead angle 0.8 mm corner radius for consistent edge strength Cylindrical hole with 40°–60° countersink Productive cast‑iron turning with reliable economy The combination of a CVD‑coated surface and a wear‑resistant carbide substrate provides a cost‑effective solution for continuous turning operations on cast iron. The T515 grade was selected for its balance between tool life and cutting speed, enabling longer tool life in stable setups while maintaining competitive productivity. By choosing a grade optimised for the workpiece material and cutting conditions, machining cycles become more predictable and downtimes are reduced. Robust geometry for repeatable cutting performance The ISO CCMT rhombic form with an 80° lead angle and a 0.8 mm corner radius ensures robust engagement at the cutting edge and improved resistance to edge chipping. A relief angle of 7° supports secure seating in standard holders while the 2.38 mm plate thickness contributes to rigidity under load. These measurable geometry features translate into repeatable results across batch runs and make the insert suitable for both external and internal turning where dimensional stability matters. Controlled chips and consistent surface finish Equipped with a single‑sided chipbreaker, the insert promotes controlled chip formation when machining interrupted or continuous cuts in cast iron. This chip control contributes directly to surface quality and can reduce the need for secondary finishing. Selecting the appropriate chipbreaker and grade in relation to stability and feed rates helps to achieve the desired balance between finish and metal removal rates without compromising process reliability. Standardised compatibility for fast integration As an ISO‑standard indexable insert, compatibility with the toolholder is determined by shape, relief angle, tolerance class, fastening method, insert size and thickness. The CCMT060208 form fits holders and boring bars designed for CCMT‑type inserts; the cylindrical central hole with single‑side countersink (40°–60°) enables stable clamping and simple replacement. The overall system consists of the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, which together reduce setup time and simplify inventory management. Guidance for selecting the right configuration When assembling a turning setup, prioritise stability and the expected cutting conditions: choose a chipbreaker and the T515 grade in conjunction with the machine rigidity and the intended cutting speed. For interrupted cuts or unstable setups, opt for geometry and clamp solutions that limit vibration and support the cutting edge. The CCMT060208 insert is specified for cast‑iron applications and performs best where a balance of economy and process stability is required. For cast‑iron turning tasks requiring stable chip formation and economical performance, consider the Tungaloy CCMT 060208 T515 insert — contact Metav Werkzeuge for technical consultation or to place an order at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6747827 Manufacturer SKU: TUN6747827 Metav SKU: 6747827-Tungaloy Facts Corner radius: 0.8 mm Lead angle: 80° Relief angle: 7° Thickness: 2.38 mm Insert size: 06 Countersink angle range: 40°–60° Special features Cutting material: CVD‑coated carbide (T515) Geometry: rhombic CCMT ISO indexable insert Chipbreaker: single‑sided Hole style: cylindrical hole with single‑side countersink Application: turning System components: external holder, boring bar, shim/clamp set and spare screws FAQ What materials is this insert intended for? The CCMT060208 T515 insert is designed primarily for machining cast iron and is optimised for that material class through its CVD‑coated carbide composition. Is the insert compatible with standard CCMT holders? Compatibility requires a holder that accepts CCMT geometry and matching relief, tolerance and fastening; the insert’s cylindrical hole with countersink supports common clamping systems. Which chipbreaker should be chosen for interrupted cuts? A chipbreaker and grade selection should consider cut stability and interruption; the single‑sided chipbreaker supplied with this insert improves chip control in many interrupted and continuous applications. Can this insert be used for finishing passes? With appropriate cutting parameters and a stable setup, the geometry and chip control of this insert can produce consistent surface quality suitable for many finishing operations. What is the manufacturer article number and SKU? Manufacturer article number 6747827; manufacturer SKU TUN6747827; Metav SKU 6747827‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide T6215 for high wear resistance, a rhombic 80° geometry with a 0.8 mm corner radius for robust edge strength, and ISO compatibility that simplifies toolholder selection; order the insert directly via Metav Werkzeuge or ask the consultants if further details are required. CCMT 060208 T6215 indexable turning insert, 80° – Tungaloy CCMT060208 T6215 is an ISO-format indexable insert for turning, engineered as a CVD-coated carbide grade for productive machining of stainless steels under stable to slightly interrupted conditions. CVD-coated cemented carbide T6215 Rhombic 80° geometry for robust turning Single-sided chipbreaker for stainless steels Cylindrical hole with countersink 40°–60° Reliability and performance in stainless steel turning The insert is manufactured from CVD-coated carbide in grade T6215, which delivers enhanced abrasion resistance and consistent edge life when machining stainless steels under stable to slightly interrupted cuts. The coating reduces flank wear and increases process reliability, so machining cycles are more predictable and tool-change frequency is minimised. Because the grade is optimised for these conditions, surface finish and dimensional consistency are improved while maintaining economical cutting performance. Secure seating and dimensional stability for tight tolerances Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-format CCMT060208 is designed accordingly. The insert features an 80° geometry combined with a 7° relief angle, a 0.8 mm corner radius and a 2.38 mm thickness, which together provide increased edge strength and resistance to chipping. The cylindrical hole with one-sided countersink (40°–60°) ensures repeatable, positive seating and reliable clamping, so concentricity and run-out are maintained even in demanding turning operations. Practical system setup and selection guidance The cutting system is comprised of the insert plus a matching external holder or boring bar, a shim/clamping set and replacement screws; this arrangement enables quick index changes and consistent clamping force across production runs. The single-sided chipbreaker promotes stable chip formation for many stainless steel grades, reducing the risk of built-up edge and improving surface quality. For best results, select the chipbreaker and insert grade in line with workpiece material, machining type and process stability to balance productivity and tool life. For technical advice or to source Tungaloy turning inserts such as the CCMT 060208 T6215, contact Metav Werkzeuge for product availability and application support. Technical Data Article number: 6876334 SKU: 6876334-Tungaloy Manufacturer SKU: TUN6876334 Manufacturer: Tungaloy Material: cemented carbide Grade: T6215 Core technical figures Corner radius: 0.8 mm Clearance angle (relief): 7° Included angle: 80° Thickness: 2.38 mm Size: 06 Design and special features ISO designation: CCMT060208 Plate form: rhombic Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Coating: CVD-coated Typical application: turning stainless steels System composition: insert, holder/boring bar, shim/clamping set and spare screws FAQ Is this insert suitable for turning stainless steel? Yes. The CCMT060208 T6215 Tungaloy indexable insert (SKU: 6876334-Tungaloy) uses a CVD-coated cemented carbide grade that is optimised for machining stainless steels under stable to slightly interrupted conditions. Which holder characteristics determine compatibility? Compatibility is determined by insert form, clearance angle (7°), tolerance class, fastening, size (06) and thickness (2.38 mm); the CCMT060208 must be matched to a holder that accepts rhombic ISO inserts with an 80° included angle. What is the purpose of the cylindrical hole with a one-sided countersink? The cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the clamping system, providing positive seating and consistent axial positioning for repeatable assembly and stable machining. Can the insert cope with interrupted cuts? The T6215 grade and the 80° geometry offer robustness for stable to slightly interrupted conditions; for heavy interruptions, a grade and geometry designed specifically for severe interruptions should be considered. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation for many stainless steel grades, improving surface finish and reducing the likelihood of built-up edge, which contributes to longer, more predictable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215 and a precise nose radius 0.8 mm for stable machining of rostfreier Stahl; the ISO geometry ensures predictable tool behaviour and easy integration into existing holders. Order the CCMT060208 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060208 T6215 – ISO turning insert for Turning by Tungaloy, CVD-coated carbide, 80° included angle The CCMT060208 T6215 is an ISO indexable turning insert intended for rostfreier Stahl turning under stable to lightly interrupted cutting conditions, with an optimised one-sided chipbreaker and cylindrical hole with countersink. CVD-coated carbide grade T6215 One-sided chipbreaker for reliable chips ISO CCMT 060208 form, 80° included angle Nose radius 0.8 mm for controlled engagement Consistent tool life and higher process stability with CVD-coated carbide The CVD-coated carbide grade T6215 delivers a balance of wear resistance and edge robustness for demanding turns on rostfreier Stahl. The chemical vapour deposition layer reduces flank wear and helps maintain dimensional accuracy over extended production runs, which results in fewer insert changes and more predictable cycle times. With the one-sided chipbreaker, chip control is optimised for typical feed ranges, reducing the risk of built-up edge and facilitating continuous production. This combination of coating and geometry supports a cost-efficient machining strategy by lowering downtime and improving overall output consistency. Predictable integration and secure mounting for existing toolholders Designed as an ISO indexable insert, the CCMT geometry matches holders by form, clearance angle and tolerance class; this simplifies retrofit into existing tool systems. The 80° included angle and 7° clearance permit stable face engagement while the 2.38 mm thickness and cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and repeatable positioning. These mechanical attributes minimise vibration and allow for consistent surface finishes, making the insert suitable for both roughing and finishing passes when paired with an appropriate external holder and clamping set. Application benefits for rostfreier Stahl turning and system-level thinking When machining rostfreier Stahl, thermal and adhesion tendencies demand a wear-resistant grade and a reliable chip management strategy. The combination of Tungaloy’s CVD-coated carbide and a defined nose radius of 0.8 mm supports stable cutting forces and consistent part quality. Selecting this insert as part of an ISO system—together with the correct holder, shim and fastening screws—provides an integrated solution that reduces trial-and-error and shortens process setup. This approach suits production environments that value repeatability and predictable tool change intervals. For technical advice or to secure supplies of the Tungaloy CCMT060208 T6215 turning insert, contact Metav Werkzeuge for application support and ordering: info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6945216 SKU: 6945216-Tungaloy Manufacturer SKU: TUN6945216 Numbers / Core technical data Nose radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 2.38 mm Size: 06 Designs / Special features Shape: rhombic (CCMT) Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Grade/coating: T6215, CVD-coated carbide Material: carbide Application: Turning System: ISO indexable turning insert FAQ What materials is this insert intended for? The CCMT060208 T6215 turning insert is specified for rostfreier Stahl and offers wear-resistant performance under stable to lightly interrupted turning conditions. Which grade and coating does the insert use? This insert uses the T6215 grade with a CVD-coated carbide structure engineered for improved flank wear resistance. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) enables secure seating and repeatable clamping when used with compatible ISO CCMT holders. What machining benefits does the 0.8 mm nose radius provide? A 0.8 mm nose radius balances strength and finish capability, providing controlled engagement and consistent surface quality on rostfreier Stahl components. Is this insert compatible with existing ISO CCMT holders? Compatibility depends on holder form, free angle, tolerance class, clamping style, size and thickness; the insert follows ISO CCMT standards to facilitate matching with appropriate holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T6215 Wendeplatten - Tungaloy
The reliable combination of CVD‑coated carbide and ISO‑standard geometry delivers consistent wear resistance and predictable tool life for stainless steel turning; coupled with precise mounting features, this supports a smooth production flow. Order the inserts directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. CCMT060208 T6215 Turning Insert — CVD-coated carbide by Tungaloy The CCMT060208 T6215 Tungaloy insert is an ISO‑standard rhomboid turning insert engineered for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Optimised for stainless steel turning Rhomboid 80° geometry, 0.8 mm corner radius Cylindrical hole with single-sided countersink Consistent performance through a dedicated carbide grade The T6215 grade is a CVD‑coated carbide formulation designed to resist abrasive and adhesive wear typical of stainless steel machining. The coating provides a durable barrier that maintains cutting edge integrity and extends tool life, which translates into fewer insert changes and less unscheduled downtime. For production environments where cycle stability and repeatable surface finish matter, this grade offers a balance of wear resistance and edge robustness, aiding overall process economy. Geometry and clamping that improve stability and surface quality The rhomboid form with an 80° cutting edge and a 0.8 mm corner radius provides a secure contact area and predictable engagement in both roughing and finishing passes. The insert’s 2.38 mm thickness and the specified free relief angle of 7° support effective load distribution and help to minimise vibration. The central cylindrical hole with single‑sided countersink (40°–60°) ensures reliable clamping in compatible holders, while the single‑sided chipbreaker offers controlled chip formation for stable cutting and improved surface integrity. System compatibility for rapid tool changes and lower setup time As part of the ISO turning insert family, the item integrates into common holder systems where compatibility is determined by insert shape, relief angle, tolerance class, fastening type, size and thickness. This standardisation simplifies tooling logistics and fast replacement during production. Selecting the appropriate chipbreaker and inserting the CVD‑coated grade suited to the workpiece material reduces the need for frequent adjustments, helping maintain consistent cycle times and predictable tool consumption. Practical guidance for application and selection Typical applications include external and internal turning where stainless steel components require reliable surface quality under stable or lightly interrupted conditions. The single‑sided chipbreaker is suitable where moderate chip control is needed; for heavy interruption or unstable setups, a different breaker geometry may be preferable. For clarity: the CVD process deposits a hard, wear‑resistant layer onto the carbide substrate to slow abrasive wear, and a chipbreaker modifies chip flow to avoid long, tangled swarf that can harm the workpiece or tool. For stainless steel turning operations that demand consistent tool life and straightforward system integration, choose the Tungaloy T6215 inserts and contact Metav Werkzeuge for application advice or to request stock availability. Technical Data Article number: 6876219 SKU: 6876219-Tungaloy Manufacturer SKU: TUN6876219 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Geometry: rhomboid, size 06 ISO designation: 060208 Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 2.38 mm Included hole: with hole Special features Grade / coating: T6215, CVD‑coated carbide Application: Drehen (turning) Suitability: machining of stainless steels under stable to lightly interrupted conditions Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) System notes: ISO insert compatibility determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT060208 T6215 insert is formulated for machining stainless steels; the T6215 CVD‑coated carbide delivers wear resistance suited to that material class. How does the insert mount in standard holders? Mounting uses the central cylindrical hole with a single‑sided countersink; compatibility with a holder requires matching form, relief angle, tolerance class, fastening and size. What does the single‑sided chipbreaker do? The single‑sided chipbreaker on this insert helps control chip shape and evacuation during turning, supporting stable cutting and improved surface finish. Is this insert suitable for interrupted cuts? The T6215 grade and insert geometry are optimised for stable to lightly interrupted conditions; heavy interruptions may require a different grade or geometry. Which features improve process reliability with this insert? Key contributors are the CVD coating for enhanced wear resistance, the robust rhomboid geometry for stable engagement, and the ISO standard sizing that simplifies holder interchangeability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T6215 Wendeplatten - Tungaloy
High wear resistance and consistent surface finish are achieved by the combination of a CVD-coated carbide grade and a rhombic geometry with a 0.8 mm corner radius, ensuring reliable productivity in turning applications; order directly via Metav Werkzeuge or contact our technical advisers for compatibility checks. CCMT 060208 T6215 turning indexable insert (ISO 060208) by Tungaloy A CCMT060208 T6215 rhombic indexable insert designed for external and internal turning, optimised for machining stainless steel under stable to lightly interrupted cutting conditions CVD-coated carbide for high wear resistance Rhombic 80° geometry for versatile turning 0.8 mm corner radius for profile stability Cylindrical hole with countersink for secure clamping Reliable chip control and surface quality for stainless steel The combination of a CVD-coated cutting grade and a defined chipbreaker geometry delivers consistent chip formation when machining stainless steel, which reduces tool-related interruptions and helps maintain process stability. CVD (chemical vapour deposition) refers to a thin, wear-resistant layer that is applied to the substrate to improve abrasion resistance and adhesion; this coating extends the service life of the carbide blank while preserving dimensional accuracy. The result is a reproducible surface finish and a predictable tool change interval, which supports leaner machining cycles and less scrap. Secure clamping and broad holder compatibility for efficient changeovers The insert’s rhombic geometry with an 80° lead angle and a cylindrical hole plus single-sided countersink (40°–60°) enables reliable seating in standard ISO holders and boring bars; compatibility is governed by form, clearance angle, tolerance class, fixation method, size and thickness. The central hole and countersink reduce the risk of insert movement under cutting forces, so clamping forces are transferred evenly and the likelihood of chatter is reduced. This technical fitment reduces setup time and simplifies replacement in production environments that require repeatable performance. Economical productivity through robust grade and predictable tool life The selected grade, identified as T6215, is a wear-resistant CVD-coated carbide optimised for the demands of turning stainless steel under stable and slightly interrupted conditions. Because tool life is extended by the coating and the substrate properties, the total cost per part is lowered through fewer insert changes and reduced downtime. For operations seeking a balance between consumable cost and machining throughput, this insert offers a practical compromise: measured longevity without sacrificing machining quality. Contact Metav Werkzeuge for application guidance on matching holders and to order genuine Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903070 Manufacturer SKU: TUN6903070 Series: ISO turning indexable inserts Core data ISO designation: 060208 Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 7° Lead/approach angle: 80° Size: 06 (ISO) Special features Material: carbide Coating: CVD-coated carbide (grade T6215) Geometry: rhombic insert Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided chipbreaker Intended application: turning Suitable for: stainless steel Fixation: compatible with ISO holders, secured by central screw FAQ What materials is this insert suitable for? The CCMT060208 T6215 insert is formulated for turning stainless steel and performs best under stable to lightly interrupted cutting conditions. How does the CVD coating benefit machining? A CVD-coated carbide insert offers improved abrasion resistance and adhesion of the coating to the substrate, which enhances tool life and helps maintain a consistent surface finish during prolonged turning operations. Which holder types are compatible with this insert? The rhombic CCMT 060208 format with a central hole and countersink is compatible with standard ISO external holders and boring bars designed for CCMT-style inserts; compatibility depends on holder form, clearance angle and screw/clamp system. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius provides a compromise between edge strength and profile definition: it increases resistance to chipping while still allowing acceptable detail on turned profiles. Is this an original Tungaloy product and which SKU should be ordered? This is an original Tungaloy indexable insert; order reference is manufacturer article number 6903070 (SKU TUN6903070). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide and a 0.8 mm corner radius for longer tool life and reliable surface quality in stainless-steel turning; compatibility with ISO holders ensures predictable integration into existing tool systems. Order the CCMT060208 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060208 T6215 Turning insert by Tungaloy — ISO rhombic 06, CVD-coated carbide A CCMT060208 T6215 ISO-standard rhombic turning insert designed for external and internal turning of stainless steel under stable to slightly interrupted conditions. CVD-coated carbide for high wear resistance Optimised for turning of stainless steel Rhombic 06 form with 7° relief angle 0.8 mm corner radius; hole with countersink Extended tool life for demanding stainless-steel turning The CVD-coated carbide grade T6215 delivers a significant increase in wear resistance compared with uncoated grades, which translates into longer machining intervals and fewer insert changes. The deposition process of the CVD coating creates a hard, thermally stable surface that reduces flank wear when machining stainless steel, especially under continuous or lightly interrupted cuts. This helps to maintain cutting-edge integrity and reduces unplanned stoppages, supporting a more efficient production cycle without sacrificing surface quality. Geometry engineered for repeatable, precision results The rhombic 06 geometry with a 7° relief angle and 0.8 mm corner radius balances edge strength and cutting performance to produce consistent part finishes while resisting chipping. The ISO-compliant form factor ensures compatibility is defined by holder shape, relief angle, tolerance class, fastening method, size and thickness; correct matching to the toolholder secures repeatable positioning and stable cutting conditions. The insert’s thickness of 2.38 mm and its cylindrical hole with a single-side countersink (40°–60°) provide a secure mechanical clamping interface for both external holders and boring bars. Reliable chip control and process stability for daily production A one-sided chipbreaker is provided to support predictable chip formation and evacuation during turning operations, improving surface finish and reducing the risk of built-up edge on work-hardened materials. The plate is intended for use in a system comprising the ISO insert, a matched external holder or boring bar, an underlay/clamp set and replacement screws — a complete approach that promotes process reliability. Selecting the correct chipformer and grade according to the workpiece material and machining strategy reduces cycle time and tool-change frequency, allowing operators and planners to focus on throughput and repeatable quality. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CCMT060208 T6215 turning insert and to arrange procurement via Metav Werkzeuge GmbH; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6945207 Manufacturer SKU: 6945207-Tungaloy Manufacturer item number: TUN6945207 Model series: ISO turning indexable inserts Material: carbide Grade: T6215 Coating: CVD Facts Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 2.38 mm Size: 06 Included angle: 80° Special features Rhombic plate form Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Designed for external and internal turning Recommended for stainless-steel machining under stable to slightly interrupted conditions ISO-compatible for standard holders and boring bars FAQ Is this insert suitable for machining stainless steel? Yes. The CCMT060208 T6215 turning insert from Tungaloy is specifically designed for stainless steel and performs best under stable to lightly interrupted cutting conditions. Which toolholders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; the ISO rhombic 06 form of this insert allows use with standard ISO holders and boring bars when matched correctly. What is the corner radius and how does it affect machining? The insert has a 0.8 mm corner radius, which provides a balance between edge strength and surface finish—larger radii improve edge stability, while smaller radii allow finer detail and lower cutting forces. What chip control can be expected in production? The one-sided chipbreaker supports reliable chip formation and evacuation, helping to maintain consistent surface quality and reducing the frequency of chip-related interruptions. How is the insert secured in the holder? The plate features a cylindrical hole with a single-side countersink (40°–60°) and is clamped using the appropriate underlay/clamp set and screws supplied as part of the tool system; correct clamping ensures stable cutting and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
High wear resistance, reliable fracture toughness and precise geometry combine to make this insert a productive choice for medium-steel turning; benefit from the T9215 CVD coating and 0.8 mm corner radius for consistent surface quality — order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT060208 T9215 ISO turning insert for turning by Tungaloy CCMT060208 T9215 is an ISO-standard rhombic turning insert optimised for external and internal turning in medium steels, combining CVD-coated cemented carbide with a single-sided chipbreaker for productive, stable cutting. CVD-coated cemented carbide T9215 0.8 mm corner radius for fine contours 7° clearance angle for stable cutting ISO rhombic 80° insert with single-sided chipbreaker Productive grade for medium-steel machining The CVD-coated T9215 grade is engineered to deliver a balance of wear resistance and fracture toughness, making it particularly suitable for continuous to lightly interrupted cuts in medium steel. The CVD layer reduces abrasive wear and extends tool life under higher cutting parameters, while the cemented carbide substrate maintains edge integrity. This combination reduces downtime for insert changes and supports higher throughput on production runs. Geometry that improves stability and surface finish A rhombic 80° geometry together with a 0.8 mm corner radius and a 7° clearance angle provides predictable chip flow and repeatable part geometry. The single-sided chipbreaker offers controlled chip formation for common turning operations, which helps to protect the cutting edge from mechanical shock and to produce a consistent workpiece surface. These geometric choices translate into fewer rejects and a more stable process window on shopfloor lathes. Compatibility and simple system integration Compatibility with toolholders depends on form, relief angle, tolerance class, fixing, size and thickness. This ISO insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to fit standard clamping systems. Typical system components include an outer holder or boring bar, a shim/clamp set and replacement screws. The insert fits existing ISO-compatible turning tool systems, enabling straightforward retrofitting without complex adjustments. Economic advantages and application recommendations Selecting this insert supports higher productivity thanks to the grade’s long life and the chipbreaker’s effectiveness in medium-steel applications. The design reduces the need for frequent indexing and helps maintain consistent part quality over long cycles. For best results, pair the insert with a rigid holder and moderate feed rates for finishing or higher feeds for semi-finishing; the grade performs well in both continuous and slightly interrupted cuts. If process parameters remain uncertain, check compatibility with Metav Werkzeuge’s technical advisors to fine-tune cutting data and holder selection. Contact Metav Werkzeuge for tailored application advice and to order the Tungaloy CCMT060208 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774078 Manufacturer SKU: TUN6774078 SKU: 6774078-Tungaloy Model series: ISO-Drehwendeschneidplatten Data Geometry angle: 80° Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Size: 06 Special features Grade: T9215 (CVD-coated cemented carbide) Plate shape: rhombic Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning System components: outer holder or boring bar, shim/clamp set, replacement screws Suitable for: medium steel, continuous to slightly interrupted cuts ISO-standard insert FAQ What materials is this insert intended for? This insert (CCMT060208 T9215 by Tungaloy) is optimised for medium steel machining and performs best in continuous to lightly interrupted turning operations. Which insert geometry does it have and why does it matter? The rhombic 80° geometry with a 0.8 mm corner radius and 7° clearance angle offers stability and consistent surface finish; the shape influences chip flow and clamping compatibility. How does the T9215 grade improve tool life? The T9215 CVD-coated cemented carbide combines a wear-resistant coating with a tough substrate to resist flank wear and minimise edge chipping under productive cutting conditions. Can this ISO insert be used with existing holders? Yes — the CCMT060208 format and the cylindrical hole with a single-sided countersink (40°–60°) are designed for ISO-compatible holders, shims and clamping sets. What cutting conditions suit this insert best? This insert is recommended for medium-steel turning with moderate to high speeds and feeds; it excels in continuous and slightly interrupted cuts when used with a rigid toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
Take advantage of a highly productive CVD-coated carbide grade that combines wear resistance with fracture toughness and a compact 0.8 mm corner radius for reliable finishing and medium-duty turning. Order directly via Metav Werkzeuge or request specialist advice to ensure optimal holder compatibility. CCMT 060208 T9215 – Tungaloy indexable insert for turning A CCMT060208 T9215 indexable insert designed for medium-duty turning of steel, delivering consistent tool life and dependable chip control in continuous to slightly interrupted cuts CVD-coated carbide grade T9215 0.8 mm corner radius for finishing Rhombic insert, size 06 Single-sided chipbreaker, with hole High-productivity cutting for mid-range steel turning The insert is built on a CVD-coated carbide substrate and the T9215 grade, engineered to balance wear resistance with fracture toughness for long tool life under normal to elevated cutting demands. The geometry – an ISO designation matching ISO 060208 – and a small 0.8 mm corner radius produce a controlled cutting edge that helps achieve consistent surface finish and repeatable part tolerances. The plate thickness of 2.38 mm contributes to edge stability during turning, while the grade suits continuous through to lightly interrupted cuts, reducing index changes and maintaining cycle efficiency. Compatibility and secure clamping to reduce setup time Compatibility with a holder is governed by insert form, clearance, tolerance class, fastening method, size and thickness; the rhombic shape and standardized ISO code simplify selection of a matching external holder or boring bar. The insert is supplied with hole and a cylindrical hole plus a one-sided countersink (40°–60°) ensuring secure clamping and accurate seating. A well-matched system — insert, holder, shim/clamp set and replacement screws — reduces vibration and the need for repeated re-adjustments, lowering set-up time and improving process stability. Optimised chip control and economical production A single-sided chipbreaker tailored to the grade helps produce predictable chip forms when machining steel, aiding evacuation and reducing jams in finishing passes. The combination of geometry and the T9215 coating promotes extended tool life, which lowers changeover frequency and contributes to lower per-part tooling costs. For shops aiming to increase throughput while maintaining surface quality, this insert supports steady, productive operation with straightforward tool management. Contact Metav Werkzeuge for tailored application advice and to secure stock of the Tungaloy CCMT060208 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777809 Manufacturer SKU: TUN6777809 Label: CCMT060208 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 060208 Insert size: 06 Corner radius: 0.8 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Special features Coating/grade: T9215 (CVD-coated carbide) Plate form: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning (external and internal) System components: insert, suitable external holder or boring bar, shim/clamp set and replacement screws Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CCMT060208 T9215 insert is specified for medium-range steel machining; the T9215 grade combines wear resistance and toughness for productive steel turning. How does the hole and countersink improve clamping? The cylindrical hole with a one-sided countersink (40°–60°) allows precise seating and reliable clamping in compatible holders, improving repeatability for the CCMT060208 insert. What does the designation CCMT060208 indicate? The code describes a rhombic ISO insert in size 06 with a 0.8 mm corner radius and the 060208 format; this helps select matching holders and confirms the insert geometry. Can this insert handle interrupted cuts? Yes — the T9215 grade and robust carbide substrate make the insert suitable for continuous to slightly interrupted cutting conditions typical in general turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm nose radius for reliable surface finish, and an ISO-compliant rhombic form for straightforward holder compatibility; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCMT 060208 T9215 – Tungaloy ISO turning insert, CVD-coated carbide, 80° rhombic A CCMT060208 T9215 ISO turning insert designed for medium steel turning applications, offering high wear resistance and reliable performance in continuous to slightly interrupted cuts CVD-coated carbide T9215 for wear resistance Optimised for medium steel turning 80° rhombic form, ISO size 06 0.8 mm nose radius with single-sided chipbreaker Deliver higher productivity in medium steel turning with CVD-coated carbide The T9215 grade combines a CVD-coated carbide substrate with a chipbreaker geometry that balances wear resistance and fracture toughness. This results in consistently productive machining when facing medium-strength steels, enabling longer tool life under continuous and slightly interrupted cuts. The combination reduces unscheduled tool changes and supports stable cycle times, helping to improve throughput in batch and serial turning operations. Ensure accurate fits and quick tool selection with ISO compatibility Built to ISO plate dimensions and form, the rhombic 80° geometry (ISO size 06) and a 7° clearance angle simplify selection of a matching holder. The standardised thickness of 2.38 mm and the defined bore/countersink arrangement allow straightforward mounting and repeatable clamping. Because holder compatibility depends on form, free angle, tolerance class, fastening method, size and thickness, the standardised design reduces setup time and minimises the risk of fitting errors in production. Secure clamping and reliable chip control for everyday workshop use The insert features a cylindrical hole with a one-sided countersink (40°–60°) for positive seating and a single-sided chipbreaker tuned for medium-steel chips. The 0.8 mm nose radius is chosen to provide a compromise between edge strength and surface finish, delivering consistent part quality across a range of feeds. Together, the mounting geometry and chip control enable predictable cutting forces and help maintain tool-edge integrity under variable cutting conditions. Practical integration and application guidance for shop-floor efficiency Compatibility within a turning system is achieved by pairing the insert with an appropriate external holder, clamping kit and replacement screws; this ISO turning insert fits common toolholders when the geometric and tolerance parameters match. For shops transitioning to higher-volume production, the insert’s blend of toughness and wear resistance supports longer tool-change intervals and predictable maintenance planning, contributing to overall process reliability. For application advice or to order the Tungaloy CCMT060208 T9215 ISO insert, contact Metav Werkzeuge for direct support and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774072 SKU: 6774072-Tungaloy Manufacturer SKU: TUN6774072 Material: carbide Model series: ISO turning inserts Designation: CCMT060208 T9215 Tungaloy insert Facts Size: 06 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Lead/relief angle: 80° Special features Coating / grade: T9215 (CVD-coated carbide) Plate form: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The Tungaloy CCMT060208 T9215 insert is optimised for medium steel machining; the T9215 grade offers high wear resistance with fracture toughness suitable for continuous to slightly interrupted cuts. How does the CCMT geometry affect holder selection? The rhombic 80° form and ISO size 06 require a compatible ISO holder; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness — matching these parameters ensures secure clamping. What is the advantage of the 0.8 mm nose radius? A 0.8 mm radius provides a balance between edge strength and surface finish, improving tool life under moderate feeds while maintaining acceptable part quality for many medium-steel turning tasks. Is the insert suitable for interrupted cuts? The CVD-coated T9215 grade is designed for continuous to slightly interrupted cuts; for heavy interruptions, assess component stability and cutting parameters before use. What fastening features does the insert use? The insert has a cylindrical hole with a one-sided countersink (40°–60°) for positive seating with standard clamping screws and supports repeatable tool positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, predictable chip control and secure clamping for steady, productive turning of medium steels; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. CCMT 060208 T9215 – ISO rhombic indexable turning insert by Tungaloy for medium steel turning, CVD‑coated carbide CCMT060208 T9215 is an ISO‑standard rhombic indexable turning insert engineered for efficient external and internal turning of medium steels, combining a robust CVD coating with a controlled one‑sided chipbreaker. CVD‑coated carbide grade T9215 Optimised for medium steel turning Rhombic ISO insert CCMT 060208 0.8 mm nose radius, 7° relief Boosted productivity through wear‑resistant coating and stable geometry The CVD‑coated cemented carbide grade T9215 delivers consistent tool life under continuous and light interrupted cuts, which translates into fewer tool changes and higher machine uptime. The combination of a wear‑resistant coating and a robust substrate offers reliable performance when machining medium steel, reducing the risk of premature flank wear. For production environments prioritising throughput, this geometry and grade provide a measurable improvement in process stability and repeatability. Secure seat and chip control for predictable results Featuring a rhombic shape and a one‑sided chipbreaker, the insert promotes predictable chip formation and evacuation, which eases tool‑holder design requirements and improves surface finish. The 0.8 mm nose radius supports controlled cutting forces while the 7° relief angle helps prevent rubbing on the flank. Where interrupted cuts occur, this configuration helps maintain edge integrity and lowers the likelihood of chipping, supporting repeatable component quality with less rework. Straightforward selection and compatibility for workshop use The ISO designation and standardised dimensions simplify selection and stocking: the insert is compatible with holders when matched for shape, relief angle, tolerance class, fastening style, size and thickness. The plate is supplied with a cylindrical hole and a single‑side countersink (40°–60°), facilitating secure clamping in many common indexable‑insert holders. This clarity in system design shortens set‑up time and makes integration into existing tool libraries straightforward for maintenance and production teams. Contact Metav Werkzeuge for tailored application advice and to request the CCMT 060208 T9215 Tungaloy insert; technical guidance and ordering assistance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6772438 Manufacturer SKU: TUN6772438 SKU: 6772438-Tungaloy Facts ISO designation: CCMT060208 Insert size: 06 Nose radius: 0.8 mm Relief angle: 7° Included angle: 80° Plate thickness: 2.38 mm Special features Grade: T9215 (CVD‑coated cemented carbide) Shape: rhombic Chipbreaker: one‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Typical application: external and internal turning of medium steel Model series: ISO indexable turning inserts System composition: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The insert in grade T9215 is optimised for medium steel machining and provides a balance of wear resistance and edge toughness suitable for continuous to lightly interrupted cuts. How does the chipbreaker affect machining performance? The one‑sided chipbreaker on the CCMT 060208 promotes controlled chip formation and evacuation, improving surface finish and reducing the chance of chip entanglement in turning operations. Is the insert compatible with common ISO holders? Compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness; the CCMT060208 conforms to ISO dimensions to facilitate use with standard external holders and boring bars. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping with standard screws and seats, providing a repeatable and stable mounting interface for consistent cutting results. Which product identifiers should be used when ordering? Reference the ISO designation CCMT060208, grade T9215, manufacturer article number 6772438 and the SKU 6772438‑Tungaloy to ensure the correct insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com