CCMT 060208 T9215 Wendeplatten - Tungaloy
Combining the T9215 CVD-coated carbide grade with a 0.8 mm corner radius yields a durable, fracture-resistant insert optimised for medium steel turning; the rhombic ISO form and 7° clearance ensure broad holder compatibility and reliable chip control. Order the CCMT060208 T9215 insert directly via Metav Werkzeuge or consult their specialists for grade and chipbreaker recommendations. CCMT060208 T9215 turning insert (CCMT) — Tungaloy The CCMT060208 T9215 is an ISO rhombic indexable turning insert intended for medium steel applications, featuring a single-sided chipbreaker and CVD-coated carbide construction for productive, continuous to lightly interrupted turning. CVD-coated carbide for high wear resistance Optimised for medium steel turning Rhombic 80° insert with 0.8 mm corner radius Cylindrical hole with one-sided countersink for secure clamping Higher productivity through wear-resistant cutting edges The T9215 grade is a CVD-coated carbide formulation designed to combine elevated wear resistance with sufficient toughness, making it a strong choice where sustained productivity is required. In practice, the coated substrate resists abrasive wear and edge breakdown during long runs, so cycle times can be increased without compromising component surface quality. The single-sided chipbreaker geometry supports consistent chip formation and evacuation, reducing the risk of build-up at the cutting edge and enabling steady cutting parameters in continuous operations. Reliable fit and simple tool change for stable processes Compatibility to the toolholder is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; this insert’s rhombic CCMT form and standard ISO designation make selection of matching holders straightforward. The insert incorporates a cylindrical hole plus one-sided countersink (40°–60°) to ensure secure clamping and repeatable seating in indexable toolholders. The 7° clearance angle and 80° included angle provide a balance between edge strength and accessibility, which aids in maintaining consistent part geometry across production batches. Material suitability and application guidance for confident specification This grade is identified as a first choice for medium steel turning: it offers a blend of abrasion resistance and fracture toughness that performs well under continuous and mildly interrupted cuts. With a 0.8 mm corner radius, the insert provides robust edge support for general turning and facing operations while delivering a good surface finish when combined with appropriate feeds. For less stable setups or heavier interruptions, selecting a chipbreaker and cutting data matched to the machine rigidity will preserve tool life and repeatability. The ISO-series construction and clear mechanical specifications simplify inventory management and tool selection across job types. Contact Metav Werkzeuge for tailored cutting data and availability of genuine Tungaloy CCMT060208 T9215 inserts; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6772430 Manufacturer SKU: TUN6772430 SKU: 6772430-Tungaloy Series: ISO turning inserts Facts Material: carbide Grade/coating: T9215 (CVD-coated) Application: Turning Insert designation: CCMT060208 Insert angle: 80° Clearance angle: 7° Design & special features Shape: rhombic (CCMT) Corner radius: 0.8 mm Thickness: 2.38 mm Size: 06 Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided FAQ Which materials is this insert best suited for? The CCMT060208 T9215 insert is optimised for medium steel; the T9215 CVD-coated carbide grade combines wear resistance and toughness to perform well in continuous and lightly interrupted turning of steel components. How does the insert secure to the holder? Compatibility is achieved via shape, clearance, tolerance, fixing method, size and thickness; this ISO rhombic insert uses a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure clamping in matching CCMT holders. Can this insert be used for interrupted cuts? The T9215 grade offers improved fracture resistance and can handle light interruptions, but for heavy interrupted cuts a grade with higher toughness or a specifically designed chipbreaker is recommended to avoid premature edge failure. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and helps achieve stable surface finish during general turning operations, reducing the likelihood of chipping under moderate depth of cut and feed. Is the CCMT060208 compatible with standard ISO toolholders? Yes, the insert follows ISO designation conventions for rhombic CCMT inserts; matching holders that accept CCMT060208 geometry and use the specified hole/countersink will provide correct seating and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability with a precise 0.8 mm nose radius and a secure ISO rhombic form, this insert ensures steady productivity in medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. CCMT060208 T9215 — Tungaloy ISO turning insert with CVD-coated carbide and 0.8 mm radius CCMT060208 T9215 is a rhombic ISO turning insert engineered for external and internal turning, offering high wear resistance and fracture safety for continuous to light interrupted cuts. CVD-coated carbide for high wear resistance ISO CCMT 060208 rhombic form 0.8 mm nose radius for fine profiling Single-sided chipbreaker with hole and countersink Durable grade for consistent productivity The T9215 grade combines a CVD-coated cemented carbide substrate with a geometry optimised for medium-steel machining, delivering a balance of wear resistance and breakage safety. The coating extends tool life under sustained load and supports higher productivity in continuous operations, while the substrate heart keeps the cutting edge robust during light interruptions. Compatibility with the machine tool is controlled by the insert’s form, 7° relief angle, tolerance class, fastening and thickness, ensuring predictable performance when paired with a correctly specified holder and clamping set. Precision geometry for surface quality and control The rhombic plate layout and the 0.8 mm nose radius produce repeatable edge contact and an improved surface finish on turned components. The plate’s single-sided chipbreaker helps to control chip formation in typical turning conditions, reducing troublesome long chips and aiding process reliability. With a nominal included angle of 80° and a plate thickness of 2.38 mm, the geometry supports stable cutting and accurate profiling, especially where dimensional consistency and surface integrity are priorities. Shop-floor integration and selection made simple As an ISO-standard insert, the CCMT060208 format simplifies replacement and inventory management across compatible holders. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match standard clamping systems; correct selection of holder, clamp and replacement screws completes the system. For practical use, select the chipbreaker and grade according to workpiece material and the interruption level of the cut—this insert is the recommended first choice for medium steel applications where tool life and process stability matter most. For high-productivity turning with Tungaloy quality, contact Metav Werkzeuge for availability and matched holder recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6777768 SKU: 6777768-Tungaloy Manufacturer SKU: TUN6777768 Name: CCMT060208 T9215 Tungaloy insert Facts Radius: 0.8 mm Included angle: 80° Relief angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features Rhombic plate form (CCMT) CVD-coated cemented carbide, grade T9215 Single-sided chipbreaker With cylindrical hole + single-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning Suitable for continuous and light interrupted cuts Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Intended for medium steel machining FAQ What materials is this insert best suited for? This CCMT060208 T9215 insert is designed primarily for medium steel machining; the T9215 grade and CVD coating provide a balance of wear resistance and toughness for such applications. How does the 0.8 mm nose radius affect surface finish? A 0.8 mm nose radius on the CCMT060208 offers improved surface finish and robust edge support compared with very small radii, helping to achieve consistent component quality when used with appropriate feed and depth of cut. Is this insert compatible with standard CCMT holders? Yes — the ISO CCMT format and the cylindrical hole with countersink allow use with compatible holders; final compatibility depends on matching form, relief angle, tolerance class, fastening and plate thickness. Which cutting conditions suit the T9215 grade? The T9215 grade is intended as a first choice for medium-steel turning under continuous to light interrupted cuts, combining high wear resistance with reliable fracture behaviour for stable productivity. Does the insert include a chipbreaker and what is its function? The insert features a single-sided chipbreaker, which promotes predictable chip formation and reduces the risk of long, entangling chips in many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable chip control make this insert a productive choice for medium steel turning; the T9215 CVD‑coated carbide grade and a 0.8 mm corner radius deliver both durability and fracture resistance. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and rapid supply. CCMT 060208 T9215 turning insert by Tungaloy — 0.8 mm radius, 7° relief CCMT060208 T9215 is an ISO‑standard indexable turning insert designed for external and internal turning in medium steel, combining high wear resistance with a one‑sided chipbreaker for stable machining performance. ISO‑standard CCMT geometry CVD‑coated carbide grade T9215 0.8 mm corner radius for strength Cylindrical hole with 40°–60° countersink Durable cutting performance for medium‑steel turning The grade chosen for this insert is CVD‑coated carbide T9215, engineered to combine elevated wear resistance with good fracture resistance under continuous to slightly interrupted cuts. This balance supports higher metal removal rates and more predictable tool life, which in turn improves productivity and reduces unscheduled downtime. The cutting edge geometry and coating together create consistent cutting conditions that make process planning more reliable and reduce the need for frequent tool changes. Precise geometry for secure clamping and repeatability The insert follows ISO dimensions and a CCMT geometry to ensure compatibility with standard external holders and boring bars; seating and clamping are determined by form, relief angle, tolerance class, clamping method, size and thickness. The item is specified as CCMT060208 with a 7° relief angle, 2.38 mm thickness and a 0.8 mm radius, and it features a cylindrical hole with a one‑sided countersink (40°–60°) for secure fastening. These precise measures support repeatable positioning and stable cutting forces, reducing vibration and improving surface integrity. Practical machining guidance to improve finish and cycle time Choosing the correct chipbreaker and grade for the workpiece and machining stability is decisive: the one‑sided chipbreaker included on this insert is suited to medium steel and helps evacuate chips effectively while maintaining a steady cutting load. In a typical system assembly the ISO insert sits in a matched external holder or boring bar together with a shim/clamping set and replacement screws; this modular approach simplifies index‑and‑replace maintenance and shortens machine downtime. The net effect is a clearer path to improved surface finish and shorter cycle times for serial production. Economy, serviceability and inspection routine Longer edge life and predictable wear patterns translate into lower total machining cost per part. Regular inspection of the cutting edge and controlled replacement before catastrophic edge failure preserve workpiece quality and prevent secondary operations. The insert supports consistent chip formation and reduces rework risk, while its robustness allows productive turning across external and internal applications. For holder matching or application‑specific recommendations consider the insert designation and geometry when specifying tooling systems — compatibility checking ensures the best performance from the CCMT060208 T9215 insert. For tailored advice on holder compatibility, availability of genuine Tungaloy inserts and supply from Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt, application‑oriented support. Technical data Article number: 6772425 Manufacturer SKU: TUN6772425 Product SKU: 6772425-Tungaloy ISO designation: CCMT060208 Material: carbide Grade: T9215 Application: turning Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 7° Included hole: with hole Angle: 80° Special features CVD‑coated carbide One‑sided chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) ISO turning insert series For external and internal turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert designed for? The CCMT060208 T9215 insert is specified primarily for medium steel machining, with the T9215 CVD‑coated carbide grade offering wear resistance and fracture safety for productive turning operations. Can this insert be used for interrupted cuts? Yes, the T9215 grade is suitable for continuous to slightly interrupted cutting; however, slotting or very heavy interruptions may require specialised geometry or a different grade. How is the insert fastened to the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) and requires a matching holder, shim/clamping set and screw to ensure secure and repeatable clamping. What are the critical geometry values to check for compatibility? Check the ISO designation CCMT060208, the 7° relief angle, 2.38 mm thickness and the 0.8 mm corner radius when selecting a mating holder to ensure proper fit and cutting clearance. Is this an original Tungaloy product? Yes, the item is supplied as a genuine Tungaloy insert and is manufactured to the brand's specification for grade and geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that balances toughness and wear resistance and a precise rhombic geometry for consistent chip control; secure compatibility with ISO holders ensures straightforward integration into existing turning setups. Order the insert directly via Metav Werkzeuge or consult the team for grade and chipbreaker selection. CCMT 060208 T9225 — ISO turning insert, CVD-coated carbide, rhombic 80° (Tungaloy) CCMT 060208 T9225 is an ISO-format rhombic turning insert designed for medium to heavy steel turning, offering a robust universal grade and secure clamping for interrupted cuts CVD-coated carbide grade T9225 Robust universal grade for steel machining Rhombic 80° form with 0.8 mm radius Cylindrical hole with 40°–60° countersink Increased reliability under varying cutting conditions The CVD-coated carbide grade T9225 is formulated to combine wear resistance with additional toughness, making the insert suitable for operations where cutting conditions change or where slight interruptions occur. This results in fewer unexpected tool changes and more stable production sequences, which supports a predictable machining rhythm and reduced unplanned downtime. The focus here is on sustained performance rather than short-term peak numbers. Geometry designed for consistent chip control and surface quality The rhombic 80° geometry and the 0.8 mm corner radius provide a balance between strength and detail when turning external and internal diameters. The single-sided chipbreaker promotes reliable chip control, reducing the risk of built-up edge and facilitating safer chip evacuation. With a plate thickness of 2.38 mm, the insert offers enhanced axial and radial stability during heavier engagement, which helps to maintain dimensional accuracy and repeatable surface finish. Seamless integration into ISO tooling systems As an ISO-standard turning insert, compatibility with a suitable external holder or boring bar is governed by the insert form, clearance angle, tolerance class, fixing method, size and thickness. The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in commonly used clamping systems. This makes the insert straightforward to fit into existing tool inventories without the need for bespoke adaptions. Productive machining with economical tool life The universal nature of the grade supports a wide range of steels and cutting scenarios, allowing fewer grade changes across job mixes and improved tool-management efficiency. Choosing the appropriate chipbreaker and taking advantage of the insert’s robust properties yields higher overall productivity and predictable tool life, which contributes to lower process costs over time. The design aims for consistent performance rather than marginal gains, supporting continuous, productive machining. For specific recommendations on grade selection, chipbreaker matching and to order the Tungaloy CCMT 060208 T9225 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with application-matched advice and availability. Technical data Article number: 6781069 SKU: 6781069-Tungaloy Manufacturer item no.: TUN6781069 Material: Carbide Grade: T9225 Core specifications Insert designation: CCMT060208 Corner radius: 0.8 mm Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 Design & special features CVD-coated carbide Single-sided chipbreaker Rhombic insert form With cylindrical hole + one-sided countersink (40°–60°) ISO-format interchangeable turning insert Intended for medium to heavy steel machining FAQ What materials is this insert suited for? The CCMT 060208 T9225 insert is a universal, robust grade intended primarily for medium to heavy steel machining, where a balance of wear resistance and toughness is required. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fixing method, size and thickness; the ISO designation CCMT060208 defines the geometry for matching standard turning holders. How does the chipbreaker influence performance? The single-sided chipbreaker on this insert supports consistent chip formation and evacuation, improving surface quality and reducing the risk of built-up edge in interrupted or variable cutting conditions. Is this suitable for interrupted cuts? Yes. The CVD-coated carbide grade T9225 and the insert geometry offer enhanced toughness for applications with slight interruptions or variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 grade and the ISO CCMT060208 geometry for reliably productive turning in medium to heavy steel applications; the robust 0.8 mm corner radius and 7° clearance ensure consistent chip control and extended edge life. Order directly via Metav Werkzeuge or consult the team for process-matching recommendations. CCMT 060208 T9225 indexable turning insert — Tungaloy, CVD-coated carbide for medium to heavy steel turning The CCMT060208 T9225 is an ISO rhombic indexable turning insert designed for external and internal turning, offering a robust universal grade for interrupted and variable cutting conditions. CVD-coated carbide T9225 Suitable for medium to heavy steel machining 0.8 mm corner radius 7° clearance angle Consistent productivity through robust grade and reliable geometry The combination of a CVD-coated carbide substrate and the T9225 grade provides a balance of wear resistance and toughness tailored for moderate to heavy-duty turning of steel. The rhombic ISO CCMT060208 geometry gives a stable cutting edge and predictable engagement, which translates into fewer insert changes and smoother toolpath planning. When machining with variable depths of cut or slightly interrupted cuts, this configuration reduces the risk of premature chipping while maintaining cutting efficiency. The result is a measurable gain in machining uptime and repeatable component quality. Improved surface finish and chip control with defined corner and clearance A 0.8 mm corner radius combined with a 7° clearance angle promotes stable cutting forces and improved surface integrity on turned components. The single-sided chipbreaker geometry supports controlled chip formation, reducing long swarf and enabling safer chip evacuation in standard turning setups. For shops aiming to lower rework rates, these attributes contribute to a more consistent finish without resorting to finer, slower machining cycles. Easy integration into ISO tooling systems and secure clamping The insert conforms to ISO dimensions and is compatible where holder form, clearance, tolerance class, fastening style, size and thickness match the specification. The design includes a central hole with a cylindrical bore and single-side countersink (40°–60°) to ensure secure seating and repeatable positioning in standard CCMT holders or boring bars. This mechanical fit supports quick index changes and reduces setup variation, which is particularly beneficial for production runs and mixed-batch work where fixture repeatability matters. Application-focused benefits and machining guidance Designed for turning, this indexable insert is best applied to external and internal turning operations on steel where a robust, universal grade is required. The T9225 grade is formulated for stable chip formation across a broad material range and is especially suited to situations with slight interruptions or varying engagement. For optimal performance, pair the insert with a holder that matches the ISO CCMT form and verify clamp torque and seat cleanliness. Selecting appropriate cutting data for the workpiece hardness and machine rigidity will unlock the full potential of the insert’s wear and toughness balance. Contact Metav Werkzeuge for tailored cutting data and ordering of the Tungaloy CCMT060208 T9225 indexable insert; expert consultation and fast delivery options are available from Metav Werkzeuge. Technical data Article number: 6781029 SKU: 6781029-Tungaloy Manufacturer SKU: TUN6781029 Model series: ISO-Drehwendeschneidplatten Designation: CCMT060208 T9225 Tungaloy indexable insert Material: carbide Grade / coating: T9225 (CVD-coated) Typical application: turning Core dimensions Insert size: 06 ISO code: 060208 Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 2.38 mm Design & special features Plate shape: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Suitability: medium to heavy steel machining; robust universal grade FAQ What material range is this insert intended for? The CCMT060208 T9225 insert is intended primarily for steel machining in medium to heavy turning operations, with the T9225 grade providing robustness for varying engagement. Can the insert be used for interrupted cuts? Yes, the T9225 CVD-coated carbide grade is formulated to cope with slightly interrupted cutting and changing cutting conditions while maintaining edge life. Which holder types are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the insert fits standard CCMT-compatible holders and boring bars that accept the ISO CCMT060208 form. How does the 0.8 mm corner radius affect performance? The 0.8 mm corner radius improves load distribution on the cutting edge, supporting better surface finish and increased resistance to mechanical shock compared with finer radii. Is the insert supplied with screws or clamps? The insert is supplied as a single indexable plate; matching clamping sets, underplates and replacement screws should be selected according to the holder system in use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, ISO-conformant CCMT geometry and a 0.8 mm nose radius for productive medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the team for application advice. CCMT 060208 T9225 — CCMT indexable turning insert for Turning by Tungaloy, CVD-coated carbide, 0.8 mm A CCMT060208 T9225 ISO indexable turning insert designed for robust external and internal turning operations, offering reliable chip control and extended edge life in variable cutting conditions. CVD-coated carbide T9225 Robust universal grade for steel 0.8 mm nose radius, 7° clearance ISO indexable rhombic CCMT form Consistent cutting performance under mixed conditions The combination of a CVD-coated carbide substrate and a universal T9225 grade provides a balance of toughness and wear resistance that suits medium-to-heavy turning of steels. The coating enhances thermal stability and reduces flank wear, while the substrate supports interrupted cuts and changing engagement conditions. This balance reduces unexpected tool changes and maintains consistent component tolerances, which contributes to predictable cycle times and improved process reliability. Clear guidance on geometry and mounting for secure operation The rhombic CCMT form with a 0.8 mm nose radius and 7° clearance angle suits many standard external and internal turning setups. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) enabling secure clamping in compatible holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and platen thickness, so selecting a matching holder and clamping set is essential for repeatable seating and optimal cutting conditions. Proper seating minimises vibration and supports surface finish targets. Productivity advantages from grade and chipforming design A single-sided chipbreaker adapted to the grade promotes controlled chip formation across a range of feeds and depths, simplifying parameter selection during ramping and finishing passes. The CVD-coated carbide layer contributes to improved edge stability at elevated cutting speeds, while the substrate toughness of the universal grade absorbs shock from interrupted cuts. The result is extended usable edge life and fewer unplanned stoppages, supporting higher machine uptime and a lower cost per part when applied with suitable feeds and speeds. Application overview and practical recommendations Intended primarily for steel turning, the insert is suited to both external and internal operations where moderate to heavy material removal is required and where cutting conditions may vary. For hardened or exotic materials, select an appropriate grade designed for those substrates. When replacing inserts, verify seating orientation and torque of fastening screws; good clamping practice prevents premature chipping and secures dimensional consistency. The ISO indexable design simplifies inventory management, as the same geometry fits a broad range of standard holders. For reliable medium-to-heavy steel turning with Tungaloy’s CVD-coated grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and holder matching for your application. Technical data Article number: 6781017 Manufacturer SKU: TUN6781017 SKU: 6781017-Tungaloy Model series: ISO indexable turning inserts Designation: CCMT060208 Grade: T9225 Material: Carbide Numbers / Core technical data Plate thickness: 2.38 mm Clearance angle: 7° Nose radius: 0.8 mm Insert size: 06 Seat angle: 80° Mounting hole: with hole Design / Special features Rhombic insert form CCMT CVD-coated carbide grade T9225 Single-sided chipbreaker Cylindrical hole + single-side countersink (40°–60°) ISO-standard indexable turning insert Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert designed to machine? The CCMT060208 T9225 insert is optimised for medium-to-heavy steel turning and offers robust performance when cutting a range of steels under variable engagement conditions. How does the CVD coating affect cutting performance? The CVD-coated carbide layer on the T9225 grade increases thermal resistance and reduces wear, which supports higher cutting speeds and longer edge life compared with uncoated substrates. Is the insert suitable for interrupted cuts? Yes, the universal toughness of the T9225 substrate and the insert geometry make the component suitable for interrupted cuts and applications with changing chiploads. What clamping features are required for correct seating? The insert uses a cylindrical hole with a single-side countersink (40°–60°); correct holder selection and adherence to the recommended fastening method ensure repeatable seating and minimise vibration. Can this insert be used for internal turning? The rhombic CCMT form and 0.8 mm nose radius are compatible with certain internal turning setups; verify holder clearance and reach before internal operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of a robust combination of a CVD-coated carbide grade and precise ISO geometry to secure stable chip control and extended tool life in medium-to-heavy turning. The proven toughness of the T9225 grade and the insert's rhombic 80° shape ensure reliable performance in interrupted cuts — order availability and technical advice via Metav Werkzeuge facilitate quick integration into existing tooling systems. CCMT060208 T9225 CCMT insert for turning — Tungaloy CCMT060208 T9225 Tungaloy insert for ISO-standard turning applications, suitable for mid to heavy steel machining CVD-coated carbide for demanding steel turning Rhombic 80° geometry with 7° clearance 0.8 mm nose radius for general turning profiles Consistent performance for medium-to-heavy steel turning The CVD-coated carbide composition, designated T9225, combines toughness with wear resistance, making it suitable for medium-to-heavy steel machining where variable engagement or slight interruptions occur. The coated substrate reduces flank and crater wear, which translates into more predictable tool life and fewer insert changes during long production runs. As a universal grade, it delivers a balance between abrasion resistance and edge stability, so processes that alternate between roughing and light finishing can be handled with the same insert, reducing inventory complexity. Reliable fit and simple tooling integration Designed as an ISO indexable insert, the component conforms to standard clamping and form dimensions; compatibility with a holder is determined by the insert’s shape, clearance angle, tolerance class, fixing method, size and thickness. The rhombic 80° form and 7° clearance permit a wide range of turning operations, including external and internal turning when paired with the correct holder or boring bar. The insert is supplied with a centred hole and a single-sided countersink (40°–60°), enabling secure seating and repeatable positioning in standard clamping systems, which eases tool changeover and reduces setup time. Controlled chip formation and stability under interrupted cuts The single-sided chipbreaker geometry supports stable chip control across the recommended workpiece materials, promoting safe evacuation and consistent surface finish. With a 0.8 mm nose radius and a plate thickness of 2.38 mm, the insert provides sufficient edge strength for interrupted cuts while still allowing acceptable surface quality for semi-finishing. The robustness of the grade ensures fewer edge chippings when the cut is subject to variation, which contributes to uninterrupted production flow and lower scrap rates. Practical system composition and workshop benefits The tooling system around this insert typically requires an ISO insert, a compatible external holder or boring bar, a retaining shim/clamp set and replacement screws. This modular approach provides flexibility: inserts can be replaced quickly while retaining the more expensive holder components. The combination of standardised geometry and a universal carbide grade simplifies stock keeping and supports faster reaction to changing production demands, enabling businesses to maintain throughput with limited tooling variety. For reliable medium-to-heavy steel turning, specify the Tungaloy CCMT060208 T9225 insert and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 — rapid supply and technical consultancy are available to support integration into existing tooling systems Technical data Article number: 6781450 SKU: 6781450-Tungaloy Manufacturer SKU: TUN6781450 Model series: ISO turning indexable inserts ISO designation: CCMT060208 Grade: T9225 Dimensions / Numeric data Nose radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 2.38 mm Insert size: 06 Special features Material: carbide Coating: CVD Plate shape: rhombic Chipbreaker: one-sided Hole: with cylindrical hole and single-sided countersink (40°–60°) Typical application: external and internal turning; choose chipbreaker and grade for workpiece and stability FAQ What materials is this insert suitable for? The CCMT060208 T9225 insert is designed primarily for steel machining and performs well in medium-to-heavy turning; the T9225 grade adds toughness for variable engagement and slight interruptions. How does the insert secure to the holder? The insert features a central hole with a cylindrical bore and a single-sided countersink (40°–60°), enabling secure clamping in standard ISO-compatible holders when combined with the appropriate shim or clamp set. Is this insert suitable for interrupted cuts? Yes, the T9225 carbide grade and the insert geometry are intended to withstand interrupted cuts and varying engagement, offering improved edge stability compared with more wear-focused grades. What chip control can be expected from this geometry? The one-sided chipbreaker promotes consistent chip formation and evacuation, aiding surface finish and reducing the likelihood of chip entanglement during continuous turning. Can the insert be used for internal turning? The rhombic 80° form and 7° clearance allow compatibility with both external and internal turning applications when the correct boring bar or holder is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9225 and the ISO CCMT geometry for reliable medium to heavy steel turning, combining robustness and predictable chip control; order the insert directly via Metav Werkzeuge or consult our specialists for fitment and optimisation. CCMT 060208 T9225 Turning insert (CCMT060208) by Tungaloy — CVD-coated carbide, 80° The CCMT060208 T9225 is an ISO-format turning insert designed for medium to heavy steel machining, offering a robust universal grade that handles variable engagement conditions and interrupted cuts. ISO CCMT 060208 format for wide compatibility CVD-coated carbide grade T9225 for toughness 7° clearance and 80° insert angle for stability Cylindrical hole with single-side countersink Greater productivity from a robust coating and substrate The combination of a CVD-coated surface with a wear-resistant carbide substrate provides a balance between hardness and toughness that is particularly effective in demanding turning tasks. The T9225 grade is formulated as a universal solution for steel machining where variable engagement or light interruption occurs; this results in fewer insert changes and steadier cycle times. In practical terms, the coating reduces adhesive wear while the substrate sustains the cutting edge, so the tool life is extended under mixed cutting conditions without sacrificing surface finish. Predictable machining behaviour through geometry and chip control Built to the ISO CCMT geometry and an 80° approach angle, the insert promotes stable cutting forces and good edge support during facing and turning. The 0.8 mm nose radius contributes to a compromise between fine surface quality and edge strength. The single-sided chipbreaker is tuned for medium to heavy steel cuts, enabling controlled chip formation and evacuation; this reduces the risk of entanglement in less rigid setups. Compatibility with holders depends on form, clearance, tolerance class, clamping method, size and thickness, so choosing the appropriate clamping and holder pairing supports repeatable results. Practical handling and assembly advantages for production environments The insert comes with a hole in a cylindrical form plus a one-sided countersink (40°–60°), simplifying secure fastening in approved CCMT seats and ensuring consistent location under repeated indexings. The plate thickness of 2.38 mm and the rhombic plate form make the insert suitable for many standard turning toolholders and boring bars. Because ISO conformity is observed, incoming checks and tool inventory management are straightforward, which benefits workshop logistics and reduces setup time. Contact Metav Werkzeuge today to confirm compatibility with existing holders or to request application advice; Metav Werkzeuge can supply the CCMT060208 T9225 insert and recommend the optimal holder and cutting parameters — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6781281 SKU: 6781281-Tungaloy Manufacturer SKU: TUN6781281 Core dimensions Thickness: 2.38 mm Nose radius: 0.8 mm Clearance angle: 7° Insert angle: 80° Size: 06 Features and materials Material: carbide (cemented carbide) Coating: CVD-coated Grade: T9225 Chipbreaker: single-sided Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Plate form: rhombic Model series: ISO turning inserts FAQ What materials is this insert suitable for? The CCMT060208 T9225 turning insert is developed primarily for steel machining, offering robust performance in medium to heavy turning applications. Can the insert handle interrupted cuts? Yes, the T9225 grade provides enhanced toughness that copes well with light interruptions and variable engagement conditions in turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance, tolerance class, clamping method, size and thickness; the CCMT060208 conforms to ISO CCMT standards and fits holders designed for that format. What advantages does the CVD coating offer? The CVD-coated surface increases wear resistance and improves edge life in steel turning, while the carbide substrate maintains toughness under fluctuating loads. How does the 0.8 mm nose radius affect surface finish? A 0.8 mm radius offers a balance between surface quality and edge strength, producing good finishes while resisting edge chipping in heavier cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 in an ISO CCMT 060208 format ensures dependable cutting performance and extended tool life during medium to heavy steel turning. The 0.8 mm corner radius and single-sided chipbreaker offer a balanced combination of edge strength and chip control. Order the insert via Metav Werkzeuge or consult their team for holder compatibility and optimisation. CCMT 060208 T9225 — ISO CCMT turning insert by Tungaloy, CVD-coated carbide CCMT 060208 T9225 is an ISO-format rhombic turning insert engineered for medium to heavy steel turning; it features a single-sided chipbreaker and a CVD-coated carbides grade suited to variable engagement conditions. ISO CCMT 060208 format, rhombic insert CVD-coated carbide grade T9225 0.8 mm corner radius for robust cutting edge Single-sided chipbreaker for chip control Reliable cutting performance for medium to heavy steel operations The CVD-coated carbide construction of this insert provides a durable cutting edge with improved wear resistance compared with uncoated grades. The T9225 grade is specified as a robust universal sort for medium to heavy steel machining where varying engagement conditions or slightly interrupted cuts demand extra toughness. Compatibility with holders depends on form, relief angle 7°, tolerance class, fastening method, nominal size and 2.38 mm thickness; matching these parameters ensures repeatable clamping accuracy and predictable cutting forces. This combination reduces unexpected tool changes and supports steady productivity in batch and single-piece production. Stable chip control and edge security for consistent surface finish The rhombic geometry with a 0.8 mm corner radius and a single-sided chipbreaker is designed to balance edge strength with reliable chip formation. Under steady feed and depth of cut conditions the chipformer helps evacuate swarf and minimise recutting, contributing to consistent surface quality and reduced cycle-time variance. The insert’s ISO CCMT 060208 configuration facilitates quick replacement and standardised holder selection, shortening setup times and simplifying tool inventory management. The enhanced toughness of the grade aids performance during short interruptions, improving overall process stability and component yield. System guidance and practical application notes for the workshop This insert is intended for conventional turning applications and integrates into a system comprising an ISO-format insert seat, a corresponding outer holder or boring bar, a support pad or clamping kit and replacement screws. The plate’s rhombic form and the cylindrical hole with one-sided countersink (40°–60°) allow secure fastening while maintaining orientation repeatability. When selecting tooling, prioritise holders that match the insert form, tolerance class and thickness to leverage the T9225 grade’s strengths. If further technical data or assistance is required, Metav Werkzeuge can advise on holder compatibility, cutting data and optimal clamping solutions. Contact Metav Werkzeuge for application guidance, ordering and compatibility checks at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6781223 SKU: 6781223-Tungaloy Manufacturer SKU: TUN6781223 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: T9225 Core data Corner radius: 0.8 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 80° Insert size: 06 ISO designation: 060208 Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features CVD-coated carbide Single-sided chipbreaker Rhombic insert form For turning (external and internal) Robust universal grade for medium to heavy steel machining Compatible with holders matching form, relief, tolerance, size and thickness FAQ What materials is this insert suitable for? The CCMT060208 T9225 insert is formulated for medium to heavy steel turning and performs well where toughness under variable engagement is required. What are the key dimensions to check for holder compatibility? Check the ISO CCMT 060208 designation, 2.38 mm thickness, relief angle 7° and the 0.8 mm corner radius to ensure the holder, clamping set and screw match the insert. Which coating and grade does the insert have? This insert uses a CVD-coated carbide in the T9225 grade, offering a balance of wear resistance and toughness for demanding turning tasks. How does the chipbreaker affect machining? The single-sided chipbreaker is designed to control swarf formation and aid evacuation, improving surface finish and reducing the risk of recutting. Is this insert suitable for interrupted cuts? Yes, the T9225 universal grade provides additional toughness, making the insert appropriate for slightly interrupted cuts and variable engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade and ISO compatibility to maintain steady production when machining steels; the T9225 grade delivers toughness for changing engagement conditions while the rhombic geometry ensures secure seating in standard holders. Order directly via Metav Werkzeuge or consult the sales engineers for a holder compatibility check. CCMT060208 T9225 – CCMT turning insert for medium-to-heavy steel by Tungaloy CCMT060208 T9225 is a CVD-coated turning insert designed for robust medium-to-heavy steel machining, compatible with ISO CCMT geometry and standard clamping systems ISO CCMT060208 geometry for universal holders CVD-coated cemented carbide grade T9225 for toughness Single-sided chipbreaker for medium‑heavy steel Cylindrical hole with 40°–60° countersink Reliable performance under variable cutting conditions The CVD-coated cemented carbide substrate combined with the T9225 grade provides a balance of hardness and toughness that supports interrupted cuts and fluctuating engagement. The CVD coating adds wear resistance while preserving edge strength, which translates into consistent tool life and reduced regrinding frequency. For production environments that face mixed batch sizes or occasional unstable feeds, this insert helps maintain dimensional stability and predictable performance across shifts. Seamless fit with ISO turning systems for quick tool changes Designed to the ISO CCMT060208 specification, the insert matches standard clamping geometries so that integration into existing toolholders is straightforward. The 7° relief angle and the specified 2.38 mm thickness ensure correct seating and axial stability in compatible holders; tolerance to form, clearance and fastening determines final compatibility. This standardisation reduces setup time, simplifies inventory management and enables faster changeovers on multi‑machine shop floors. Controlled chips and secure clamping for safer machining A single-sided chipbreaker and a corner radius of 0.8 mm work together to improve chip formation and evacuation when turning steels. The rhombic insert profile and the cylindrical hole with a 40°–60° countersink support reliable clamping and repeatable indexing, lowering the risk of insert movement during heavy cuts. The combined effect is improved surface finish and fewer interruptions from chip build-up, which contributes to steadier cycle times and better part quality. Engineered features that support productivity and process security The rhombic shape and included angle 80° make the insert versatile for both external and internal turning operations, while the grade's toughness aids in handling slightly interrupted cuts without premature edge failure. Material‑specific selection and matching of the chipbreaker to the workpiece material and stiffness are decisive for maximising tool life. When process repeatability and predictable outcomes are priorities, this insert offers a practical compromise between durability and cutting performance. Contact Metav Werkzeuge for personalised application advice and a holder compatibility check to ensure the CCMT060208 T9225 insert meets the workshop's process needs; Metav Werkzeuge can also confirm availability and technical specifications Technical data Article number: 6781072 SKU: 6781072-Tungaloy Manufacturer SKU: TUN6781072 Model series: ISO turning inserts Material: cemented carbide Grade/coating: T9225, CVD-coated Facts ISO designation: CCMT060208 Corner radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Included angle: 80° Size: 06 Special features Rhombic insert shape Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Robust universal grade for medium to heavy steel turning Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What range of materials is this insert suited for? The CCMT060208 T9225 insert is specified for medium‑to‑heavy steel turning; the T9225 grade provides the toughness required for varying engagement and slightly interrupted cuts. How does the T9225 grade affect tool life compared with wear‑focused grades? The T9225 grade balances wear resistance and toughness, so the insert sustains edge integrity under unstable cutting conditions while still offering competitive life in general steel machining. Which holder features are necessary for proper compatibility? Compatibility requires a holder matching the ISO CCMT060208 form, correct relief (7°), appropriate tolerance class, secure fastening and room for the 2.38 mm thickness and 0.8 mm corner radius. How does the chipbreaker design influence surface finish? The single‑sided chipbreaker promotes controlled chip formation and evacuation in steel turning, which helps to achieve a more consistent surface finish and reduces recutting of chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 T9225 Wendeplatten - Tungaloy
Reliable productivity for medium to heavy turning tasks is achieved by combining the CVD-coated T9225 grade with a robust rhombic geometry and secure clamping features; order the insert directly through Metav Werkzeuge or consult the technical team for application-specific recommendations. CCMT060208 T9225 Turning insert (ISO) — Tungaloy The CCMT060208 T9225 is an ISO‑standard rhombic insert developed for medium to heavy turning, offering a balance of wear resistance and toughness for varying engagement conditions. Robust CVD-coated carbide grade T9225 Suitable for medium to heavy steel turning Rhombic geometry, 7° clearance angle Cylindrical hole with 40°–60° countersink Consistent chip control for demanding steel work The insert delivers dependable performance thanks to the T9225 CVD coating on a carbide substrate, engineered as a robust universal grade for medium to heavy steel machining. This composition increases wear resistance while retaining toughness, which is particularly useful under slightly interrupted cuts or fluctuating engagement conditions. The built-in chipbreaker design supports controlled chip formation, reducing rework and machine downtime and thereby improving process efficiency and component quality. Geometry that supports stable, repeatable turning Precision in geometry underpins stable results: the rhombic contour with an 80° included angle and a 7° relief angle ensures straightforward orientation in ISO holders and predictable cutting behaviour. The rounded cutting edge with an effective 0.8 mm corner radius helps distribute cutting forces and extends edge life during heavier passes. A plate thickness of 2.38 mm contributes to rigidity at the insert seat, reducing vibration and enabling consistent surface finish and dimensional repeatability. Secure mounting and system compatibility As an ISO‑compliant turning insert, the plate interfaces with standard holders; compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a single‑sided countersink (40°–60°) provides a reliable clamping seat for torque transmission and repeatable indexing. The insert forms part of a complete system consisting of an ISO insert, a matching external holder or boring bar and the appropriate shim/clamping kit and screws, which together ensure safe and precise fixation for production use. Practical advantages for workshop productivity Designed for external and internal turning, the indexable plate is a versatile choice when a balance of wear resistance and toughness is required. Selecting the appropriate chipbreaker and the T9225 grade helps to extend tool life and improves process stability, which can lower overall tooling costs and increase throughput. The combination of a hardened carbide substrate and CVD layer supports longer runtimes in batch production while maintaining surface quality and dimensional control. Contact Metav Werkzeuge today for specification advice and rapid supply of the CCMT060208 Tungaloy insert, ensuring the right combination of grade and chipbreaker for the intended turning application. Technical data Article number: 6781478 Manufacturer SKU: TUN6781478 Vendor SKU: 6781478-Tungaloy Designation: CCMT060208 T9225 Tungaloy insert Application: Turning Core measurements Corner radius: 0.8 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 80° Size: 06 Design & features Material: carbide (Hartmetall) Coating / grade: T9225 (CVD‑coated) Shape: rhombic Hole: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Compatibility: ISO‑standard turning inserts; holder fit depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is the CCMT060208 T9225 suitable for? The CCMT060208 T9225 insert is a universal, robust grade intended primarily for medium to heavy machining of steel, offering a good balance of wear resistance and toughness for interrupted and variable cuts. What are the key dimensional specifications of this insert? Key dimensions are a corner radius of 0.8 mm, plate thickness 2.38 mm, relief angle 7° and an included angle of 80°; these values define rigidity and cutting behaviour for turning operations. How is the insert fixed in the holder? Fixing is achieved via the cylindrical hole with a single‑sided countersink (40°–60°), which allows secure clamping in ISO holders when used together with the appropriate shim and clamping kit. Is the chip formation controlled for long cutting lengths? Yes, the one‑sided chipbreaker geometry supports reliable chip control, reducing the risk of entanglement and facilitating stable long runs and safer handling. Can this insert handle interrupted cuts? The T9225 grade provides increased toughness compared with purely wear‑resistant grades, making it suitable for slightly interrupted cuts and variable engagement typical in many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH120 Wendeplatten - Tungaloy
Take advantage of PVD-coated carbide in the AH120 grade combined with an 80° rhombic geometry and a 0.2 mm nose radius for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the technical advisors for application support. CCMT09T302 AH120 Tungaloy indexable insert — PVD-coated carbide, 0.2 mm radius CCMT09T302 AH120 Tungaloy indexable insert for general turning applications, designed to deliver a sharp cutting edge and consistent process security in both external and internal operations PVD-coated carbide for wear resistance Sharp cutting edge for consistent surface quality 80° rhombic geometry for versatile turning 0.2 mm nose radius for fine features Improved wear resistance for uninterrupted production The AH120 grade is a PVD-coated carbide developed to combine wear resistance with a tough cutting edge, which results in process security during repetitive turning cycles. This grade is particularly suited when a balance of a sharp cutting edge and reliable edge stability is required, reducing the incidence of unplanned tool changes. The coating reduces flank wear and helps maintain cutting performance over longer batch runs, providing measurable gains in uptime and repeatability in a production environment. Secure clamping and adaptable mounting for consistent results The 80° rhombic geometry with a cylindrical hole and single-sided countersink (40°–60°) ensures stable clamping and straightforward indexing in compatible holders. Compatibility with a given toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness, so adoption into existing tool systems is typically a matter of matching these parameters. The insert’s geometry supports a range of turning operations and helps maintain cutting forces in a predictable manner for repeatable component quality. Predictable chip control and improved process economy Equipped with a one-sided chipbreaker, this insert promotes stable chip formation suited to a variety of turning tasks, which in turn reduces interruptions and handling time. The combination of a robust substrate and PVD finish extends tool life and lowers total machining cost per part through fewer tool changes and consistent surface quality. For production-focused workshops, the result is a tangible improvement in throughput and reduced variance in part-to-part outcomes. Selection guidance and typical turning applications As an indexable insert for turning, the CCMT09T302 format suits both external and internal operations, from semi-finishing to fine finishing when a small nose radius is required. The 0.2 mm nose radius supports detailed profiles and tight cornering, while the AH120 grade is intended where edge sharpness and process reliability are priorities. When integrating this insert, select the chipbreaker and grade according to workpiece material and machine–tool rigidity to optimise performance and surface finish. For proven process security with the Tungaloy AH120 grade, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6853585 Manufacturer article number: 6853585 SKU: 6853585-Tungaloy Manufacturer SKU: TUN6853585 Series: ISO turning indexable inserts Type designation: CCMT09T302 AH120 Tungaloy indexable insert Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Geometry angle: 80° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Coating: PVD coating Insert shape: rhombic Chipbreaker: one-sided Application: turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What kinds of turning operations suit this insert best? The CCMT09T302 AH120 insert is suitable for external and internal turning, offering a balance between finishing and semi-finishing where a sharp cutting edge and process security are required. Can this insert be used in existing ISO-compatible holders? Yes, the insert follows ISO indexable insert standards; compatibility depends on matching holder form, relief angle, tolerance class, fastening method, size and thickness. What does the AH120 grade offer compared with standard grades? The AH120 grade provides enhanced wear resistance through a PVD-coated carbide substrate while maintaining a sharp cutting edge for consistent surface quality and longer tool life. How does the hole and countersink design affect installation? The cylindrical hole with a single-sided countersink (40°–60°) supports secure clamping and correct seating in holders designed for this hole style, contributing to repeatable positioning and stability. What benefits does the 0.2 mm nose radius deliver? A 0.2 mm nose radius enables detailed profile work and improved surface finish on fine features, making it suitable for precision turning tasks requiring close tolerances. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, a sharp yet stable cutting edge and a universal PVD grade for reliable stainless steel turning. Order the CCMT09T302 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T302 AH6225 Tungaloy turning insert – rhombic, 0.2 mm radius The CCMT09T302 AH6225 is an ISO rhombic turning insert designed for external and internal turning with a universal PVD-coated carbide grade suited to stainless steel machining. PVD-coated carbide AH6225 for stainless steel ISO rhombic CCMT form, 80° included angle 0.2 mm corner radius for precise finishing Hole with single-sided countersink for secure fit Consistent cutting performance in stainless steel The CCMT09T302 AH6225 combines a PVD-coated carbide substrate with a grade engineered for stainless steel, delivering a sharp edge that resists deformation under variable conditions. The AH6225 grade balances toughness and wear resistance to reduce edge chipping during interrupted cuts and when machining work-hardened surfaces. This results in extended tool life and more predictable component tolerances, which supports efficient cycle planning and reduced rework. Geometry engineered for precision and stability The rhombic CCMT form provides an 80° included angle that promotes rigidity for facing and longitudinal turning, while the 0.2 mm corner radius enables fine surface finishes without sacrificing edge strength. A 7° clearance minimises rubbing at the flank and helps maintain stable cutting forces. These geometric details translate into repeatable dimensional control and consistent surface quality when the tool is integrated into a properly set-up turning system. ISO compatibility for straightforward integration Produced to ISO-formed dimensions, the insert fits standard holders when matched by form, clearance, tolerance class, fixing method, size and thickness. The insert thickness of 3.97 mm and the presence of a hole with a single-sided countersink (40°–60°) ensure secure seating and ease of fixation in a wide range of clamping systems. The system concept comprises the ISO insert together with a suitable external holder or boring bar, an underlay/clamping set and replacement screws — a pragmatic approach for shop-floor implementation. Practical recommendations for machining and selection The single-sided chipbreaker and universal AH6225 coating perform well in medium cutting regimes and variable conditions typical of stainless steel components. For heavy interrupted cuts or extremely hard conditions, a tougher geometry or alternative grade may be preferable; for finish passes, the small corner radius delivers the required surface quality. Application-focused selection and matching of the chipbreaker to material and stability deliver the best balance between productivity and tool life. Metav Werkzeuge can provide application guidance and data to support the tooling decision. Contact Metav Werkzeuge today to discuss application-specific recommendations for Tungaloy inserts and to secure the right configuration for consistent turning results Technical Data Article number: 6951130 SKU: 6951130-Tungaloy Manufacturer SKU: TUN6951130 Manufacturer: Tungaloy Core technical data Model series: ISO-Drehwendeschneidplatten Insert designation: CCMT09T302 Grade/coating: AH6225, PVD-coated carbide Thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Size: 09 Special features Rhombic insert form Single-sided chipbreaker Hole: cylindrical with single-sided countersink (40°–60°) Universal grade for stainless steel machining System components: insert, holder/boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert designed to machine? The CCMT09T302 AH6225 Tungaloy insert is designed primarily for stainless steel and covers a broad range of stainless steel machining tasks. How does the AH6225 grade affect tool life? The AH6225 PVD-coated grade offers a balance of wear resistance and toughness, which extends edge life under medium cutting conditions and reduces the frequency of insert changes. Which holders are compatible with this insert form? Compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; the ISO rhombic CCMT form fits standard CCMT-compatible holders when these parameters match. Is the insert suitable for both external and internal turning? Yes, the geometry and one-sided chipbreaker make the insert suitable for both external and internal turning applications when paired with the appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH6225 grade and ISO‑standard CCMT geometry for consistent performance on stainless steels; the sharp yet stable cutting edge and secure clamping features reduce downtime and simplify tool selection. Order the CCMT09T302 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T302 AH6225 indexable turning insert for stainless steel – Tungaloy A CCMT09T302 AH6225 indexable insert engineered for external and internal turning of stainless steels, delivering a sharp, stable edge and reliable chip control in medium machining. ISO rhombic CCMT 09 geometry PVD‑coated AH6225 carbide for stainless steel 0.2 mm corner radius, 7° relief angle Cylindrical hole with single‑side countersink Consistent results through a specialised carbide grade The PVD‑coated AH6225 carbide combines a sharp cutting edge with the fracture resistance needed for changing machining conditions on stainless steel. This grade is optimised for medium cutting, offering a balance between wear resistance and edge stability that supports longer runs and predictable results. The coating enhances resistance to adhesive wear and helps maintain a uniform tool life, so process planners can rely on repeatable surface quality and reduced rework. Secure clamping and geometry that improves process stability The rhombic CCMT form with a 09 size and 0.2 mm corner radius, together with a 7° clearance angle and an 80° approach angle, provides a well‑balanced contact zone between insert and holder. The cylindrical hole with single‑side countersink (40°–60°) ensures positive location and secure clamping when used with the matching top clamp and screws. In practice, this geometry reduces vibration and supports consistent chip formation with the single‑sided chipbreaker, translating directly into improved dimensional accuracy and surface finish for turned components. Simplified tool management and integration into existing setups As an ISO‑standard insert, compatibility is defined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert integrates into typical turning systems comprising a suitable external holder or boring bar, a backing/clamping set and replacement screws. Using this universal grade can reduce the number of different inserts required for mixed stainless steel production, lowering inventory complexity while maintaining productivity. The insert’s construction from carbide combined with the PVD treatment makes it a pragmatic choice for shops seeking a cost‑effective balance between performance and longevity. For reliable stainless steel turning with the PVD‑coated AH6225 grade and secure CCMT geometry, contact Metav Werkzeuge for ordering and technical consultation: info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6829094 Manufacturer SKU: TUN6829094 SKU: 6829094-Tungaloy Designation: CCMT09T302 AH6225 Tungaloy insert Application: Turning Core data Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Approach/insert angle: 80° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Features and materials Material: Carbide (Hartmetall) Coating/grade: PVD‑coated AH6225 Geometry: Rhombic (CCMT) Chipbreaker: Single‑sided Typical use: External and internal turning Compatibility factors: Form, clearance angle, tolerance class, clamping, size, thickness FAQ Which materials is this insert intended for? The CCMT09T302 AH6225 insert is designed primarily for machining stainless steel; the AH6225 grade is a universal PVD‑coated carbide optimised for a range of stainless steel alloys. How is compatibility with toolholders ensured? Compatibility depends on matching the CCMT form, the 09 size, the 3.97 mm thickness and the 7° clearance angle; ensure the holder accepts an insert with a cylindrical hole and single‑side countersink as used on the CCMT09T302 AH6225. What cutting conditions suit the AH6225 grade? The AH6225 PVD‑coated grade is intended for medium machining and variable conditions where a sharp but stable cutting edge improves surface quality and tool life. What clamping elements are required for safe operation? Use a suitable external holder or boring bar, a backing plate/clamping set and the correct replacement screws to secure the CCMT09T302; the cylindrical hole with countersink provides positive location when clamped correctly. What effect does the 0.2 mm corner radius have on the cut? The 0.2 mm corner radius on the CCMT09T302 produces a finer edge for improved surface finish and reduced peak stresses at the cutting edge; it is suitable for finishing to medium cutting depths. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide grade AH6225 delivers a sharp, wear-resistant cutting edge for machining stainless steel, while the rhombic ISO 09 geometry with a 0.2 mm corner radius ensures stable chip control and consistent surface finish; order directly via Metav Werkzeuge or consult our technical advisors for application support. CCMT09T302 AH6225 — ISO indexable turning insert for Turning | Tungaloy A CCMT09T302 AH6225 indexable turning insert engineered for external and internal turning, optimised for medium-duty machining of stainless steel and variable production conditions. PVD-coated carbide for stainless steel Stable, sharp cutting edge Rhombic ISO 09, 0.2 mm radius Cylindrical hole with countersink Precise performance for stainless steel turning The grade combines a PVD-coated carbide substrate with the tailored AH6225 chemistry to balance edge sharpness and toughness. This configuration promotes stable chip formation under changing cutting conditions and lengthens effective edge life during medium-duty operations. For process planners, the result is a more predictable surface finish and reduced frequency of unscheduled tool changes, supporting higher overall machine uptime and better adherence to production tolerances. Robust geometry and secure clamping for reliable results Designed as a rhombic ISO insert in ISO 09 format, the geometry offers versatile cutting orientations for both external and internal turning tasks. The 0.2 mm corner radius reduces edge stress at moderate feeds while maintaining sufficient strength for interrupted cuts. Combined with a 7° relief angle, a plate thickness of 3.97 mm and a cylindrical hole with countersink (40°–60°), the insert provides secure clamping and repeatable positioning; compatibility with holders depends on form, relief angle, tolerance class, fixing method, size and thickness. System-minded design to boost shop productivity Chip control is supported by the one-sided chipbreaker, chosen to match typical turning feeds and workpiece stability. The universal nature of the grade makes it suitable across a wide range of stainless steel components, simplifying tool inventory. The complete system approach — ISO insert, matching external holder or boring bar, underlay/clamping set and spare fixing screws — allows fast changeovers and consistent repeatability. For production environments seeking lower cycle-time variability and straightforward tool management, this insert helps to streamline daily operations. Contact Metav Werkzeuge for tailored recommendations on using the Tungaloy CCMT09T302 AH6225 insert in stainless steel applications and for prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer item number: 6951115 SKU: 6951115-Tungaloy Manufacturer SKU: TUN6951115 Model series: ISO turning indexable inserts Material: Carbide Numbers / Core Technical Data Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Insert size: 09 Included angle: 80° Designs / Special Features Grade: AH6225 (PVD-coated carbide) Chipbreaker: one-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Shape: rhombic Application: Turning System components: ISO insert, compatible holder, underlay/clamping set, spare screws FAQ Can this insert machine stainless steel? Yes. The CCMT09T302 AH6225 indexable turning insert is a universal grade optimised for stainless steel and designed to provide stable chip formation and reliable edge life in medium-duty turning. Which holders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the CCMT09T302 fits standard ISO clamping systems for 09-size rhombic inserts when the holder matches these parameters. How does the 0.2 mm corner radius affect finish and strength? A 0.2 mm corner radius provides a balance between improved surface finish at moderate feeds and sufficient edge strength for common turning operations with variable workpiece stability. What is the role of the one-sided chipbreaker? The one-sided chipbreaker on this insert controls chip form and evacuation for typical turning feeds in stainless steel, helping to reduce entanglement and improve process consistency. Is this insert suitable for internal and external turning? Yes. The rhombic geometry and ISO 09 designation make the CCMT09T302 AH6225 suitable for both external and internal turning tasks when used with appropriate holders and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6235 Wendeplatten - Tungaloy
Benefit from a robust combination of long tool life, consistent chip control and straightforward mounting for reliable turning operations; order the CCMT09T302 AH6235 indexable insert via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 AH6235 Tungaloy indexable insert for turning, 7° relief CCMT09T302 AH6235 is an ISO‑standard indexable turning insert designed for productive external and internal turning, optimised for applications with increased breakout risk. PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts Rhombic 09 form with 0.2 mm corner radius Central hole with cylindrical bore and 40°–60° countersink Increased productivity through stable cutting edges This insert is manufactured from carbide and finished with a PVD-coated surface in grade AH6235, a combination chosen to extend tool life in challenging turning conditions. The result is a cutting edge that sustains performance during longer runs and under variable engagement, which translates into fewer index changes and improved machine uptime. The PVD layer reduces adhesion and improves wear resistance, so process stability is raised while maintaining consistent dimensional control. Reliable performance on rostfreier Stahl and interrupted cuts The grade is tailored for tougher materials and intermittent cutting. When machining rostfreier Stahl, the microstructure and workhardening tendencies demand a tougher grade and effective chip control; this insert’s geometry and single-sided chipbreaker deliver predictable chip formation and reduced edge chipping. Operators achieve cleaner surfaces and fewer secondary operations, particularly in applications with frequent entry and exit of the tool edge. Practical geometry for versatile turning applications The rhombic ISO 09 shape with a 0.2 mm corner radius and a 7° relief angle provides a balance between edge strength and form accuracy. The 80° included angle supports robust support in the pocket, while the indexable insert thickness of 3.97 mm contributes to rigidity in the clamping arrangement. These dimensions help maintain stability during external turning and light internal turning, enabling a consistent finish with controlled cutting forces. Mounting and compatibility explained for straightforward selection Compatibility depends on holder form, clearance, tolerance class, fixing method, and thickness. The insert features a central hole with a cylindrical bore and a one‑sided countersink (40°–60°) for secure fastening in standard ISO pockets. Selection of a matching external holder or boring bar, plus the correct clamp and replacement screws, ensures correct seating and repeatable positioning, simplifying tool changeovers and reducing set‑up time. For application guidance, stock enquiries or to request the Tungaloy CCMT09T302 AH6235 inserts for demanding turning tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and prompt supply. Technical data Article number: 6890159 Manufacturer SKU: TUN6890159 Dealer SKU: 6890159-Tungaloy Model series: ISO indexable turning inserts Designation: CCMT09T302 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Special features PVD-coated carbide, grade AH6235 Suited for rostfreier Stahl and interrupted cuts Single-sided chipbreaker Rhombic plate form Central hole with cylindrical bore + one-sided countersink (40°–60°) ISO‑standard turning application FAQ Which materials is this insert suited for? The CCMT09T302 AH6235 Tungaloy indexable insert is specified for rostfreier Stahl and other materials where a tougher grade and good chip control are required; the AH6235 grade provides increased resistance to chipping in interrupted cuts. What does the AH6235 designation mean? AH6235 denotes a PVD-coated carbide grade developed for enhanced toughness and wear resistance; the coating reduces adhesion and improves edge stability during extended cutting. How is the insert secured in the holder? This plate is retained via its central hole with a cylindrical bore and a one-sided countersink (40°–60°); use a compatible ISO holder, matching clamp and replacement screws to ensure correct seating. What cutting geometry should be expected from the plate? The rhombic 09 form with a 0.2 mm corner radius and 7° relief angle offers a compromise between strength and finish, suitable for a range of turning operations where edge robustness is important. Is this insert suitable for internal turning? Yes—when fitted to a suitable boring bar or internal holder the insert’s geometry supports light internal turning in addition to external operations, provided rigidity and clearance are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, process-secure cutting grade combined with precise geometry for consistent turning results; the insert’s PVD-coated AH725 carbide and single-sided chipbreaker support high process reliability and good edge stability. Order directly via Metav Werkzeuge or consult our experts for application-specific selection. CCMT 09T302 AH725 indexable turning insert — PVD-coated carbide, rhombic CCMT by Tungaloy CCMT 09T302 AH725 is an ISO-standard indexable turning insert designed for external and internal turning, offering a small 0.2 mm nose radius and an 80° approach angle for versatile finishing and light roughing operations. PVD-coated carbide grade AH725 Robust single-sided chipbreaker geometry Rhombic CCMT form with 0.2 mm nose ISO compatibility and standard fixing Reliable performance for mixed-material turning The PVD-coated AH725 carbide grade delivers a balanced combination of wear resistance and toughness, making the insert particularly suited for machining Stahl and rostfreier Stahl in variable production environments. The rhombic CCMT form and 0.2 mm nose radius provide predictable contact conditions, which reduces vibration and helps maintain surface quality. This design is especially beneficial when handling frequent material changes or when toolholders are compact and rigidity is limited. Improved process security and chip control Built with a single-sided chipbreaker, the insert supports controlled chip formation across a range of cutting parameters, aiding chip evacuation and reducing the risk of built-up edge. The insert’s geometry, together with the PVD-coated surface, contributes to stable cutting forces and repeatable tool life, which can reduce downtime and achieve consistent component tolerances. Those seeking measurable process improvements will value the combination of edge stability and chip management. Compatibility, clamping and mounting considerations The insert conforms to ISO specifications for CCMT-type plates and requires a compatible external holder or boring bar; compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness. The plate features a cylindrical hole with a single-sided countersink (40°–60°) and a plate thickness of 3.97 mm, which suits common ISO clamping systems. Checking holder geometry and clearance angles ensures optimal seating and repeatable clamping for serial production. Small-radius finishing and tool-life balance With an 80° approach angle and 7° clearance, the geometry favours fine surface results while maintaining enough robustness for light to moderate material removal. The compact nose radius is ideal for achieving tight profile detail and controlled cutting engagement. The universal characteristics of the grade make it an efficient choice when a single insert must cover both Stahl and rostfreier Stahl applications without frequent tool changes. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and assistance selecting the correct holder or chipbreaker for the specific application; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6856763 SKU: 6856763-Tungaloy Manufacturer SKU: TUN6856763 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating / grade: AH725 (PVD-coated) Shape / size: rhombic, 09 Thickness: 3.97 mm Nose radius: 0.2 mm Approach angle: 80° Clearance angle: 7° Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Facts Compatible with ISO CCMT holders Small 0.2 mm nose for finishing Plate thickness 3.97 mm for common clamping Countersink suited to standard fixing screws Special features Universal, break-resistant grade for Stahl and rostfreier Stahl Good process security with stable edge life PVD-coated carbide for balanced wear resistance and toughness Suitable for external and internal turning applications Designed for applications with high demands on process reliability FAQ What materials is this insert suitable for? The CCMT 09T302 AH725 insert is specified for machining Stahl and rostfreier Stahl; the AH725 grade gives a universal balance of wear resistance and toughness for mixed-material environments. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the insert is ISO-standard CCMT and fits holders designed for CCMT 09 inserts with the corresponding clamping and countersink arrangement. How does the chipbreaker affect machining? The single-sided chipbreaker promotes predictable chip formation and evacuation, improving process security and reducing the likelihood of built-up edge during turning with moderate cutting parameters. Is the insert suitable for finishing operations? Yes — the 0.2 mm nose radius, 80° approach angle and 7° clearance make it well suited to fine finishing and light profile work while retaining edge robustness. What are the advantages of the AH725 grade? AH725 is a PVD-coated carbide grade that offers universal performance with good edge stability and wear resistance, especially where varied material batches and high process reliability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade AH725 and a stable 80° rhombic geometry for reliable, breakage-resistant turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 AH725 Tungaloy turning insert — PVD-coated carbide, 80° rhombic form CCMT09T302 AH725 Tungaloy is an ISO-compliant indexable insert for external and internal turning, offering a universal, breakage-resistant grade suited to varied steels and stainless steels Universal PVD-coated carbide grade AH725 80° rhombic geometry for stable cutting 0.2 mm corner radius for accurate profile control Cylindrical hole with 40°–60° countersink Maximise process security with a universally applicable carbide grade The PVD-coated carbide AH725 delivers consistent performance across varying production demands. This ISO turning insert is engineered for applications where material mixes and tool size changes occur frequently; the chosen grade balances good edge stability with economical wear behaviour. The coating improves resistance to built-up edge and thermal overload, which supports more reliable cycle results and reduces unexpected downtime. The insert is therefore well suited to environments prioritising steady output and repeatable component quality. Clear compatibility rules for fast tool set-up and low risk Compatibility with a clamping system is defined by the insert's shape, clearance angle 7°, tolerance class, attachment, size and thickness 3.97 mm. These objective parameters simplify selection of a matching external holder or boring bar and reduce set-up iterations. Because the insert conforms to ISO norms, it integrates smoothly into existing tool systems: matching the holder by the same ISO designation avoids misfits and protects against unstable clamping that could otherwise lead to premature edge failure. Broad material range and controlled chip formation for efficient turning The indexable plate is optimised for machining steel and stainless steels; the single-sided chipbreaker promotes consistent chip control in common turning operations and helps maintain surface quality in both roughing and finishing passes. The combination of grade and chipformer supports stable cutting forces and reduces the likelihood of edge chipping, improving first-pass yield. For shops processing mixed batches or switching from roughing to finishing, the insert offers a practical compromise between toughness and wear resistance. Design details that aid handling, indexing and repeatable accuracy The rhombic form with an 80° angle and corner radius 0.2 mm keeps cutting forces predictable while permitting accurate profile work close to shoulders. The insert features a cylindrical hole with single-sided countersink (40°–60°) which secures positive seating and easy replacement with standard clamping kits. The overall geometry and 3.97 mm thickness contribute to rigidity within the tool assembly, helping to reduce vibration and extend tool life. These practical design choices translate into fewer stoppages, less manual adjustment and a steadier production flow. For tailored advice on applying the CCMT09T302 AH725 Tungaloy turning insert or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6865192 Manufacturer SKU: TUN6865192 SKU: 6865192-Tungaloy Brand: Tungaloy ISO designation: CCMT09T302 Application: Turning Material: Carbide Facts Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Thickness: 3.97 mm Insert size: 09 Countersink angle: 40°–60° Special features PVD-coated carbide grade AH725 Single-sided chipbreaker Rhombic form (80°) Cylindrical hole + single-sided countersink ISO-compliant indexable insert Universal, breakage-resistant for steel and stainless steels Suitable for external and internal turning FAQ What materials is this insert suited for? The CCMT09T302 AH725 Tungaloy insert is designed primarily for steel and stainless steels, with the AH725 grade offering a balance of toughness and wear resistance for mixed-material production. How is holder compatibility ensured? Compatibility depends on the insert's shape, clearance angle (7°), tolerance class, attachment method, size and thickness; matching the ISO designation CCMT09T302 with an appropriate holder ensures correct seating and clamping. What benefits does the PVD coating provide? The PVD-coated carbide of this Tungaloy plate improves edge life and thermal resistance, reducing built-up edge and contributing to more consistent surface finishes during turning operations. Can this insert be used for both roughing and finishing? Yes, the combination of single-sided chipbreaker and the AH725 grade allows the insert to perform across roughing and finishing steps, particularly when machining various steels. How does the corner radius affect the machined profile? A corner radius of 0.2 mm offers improved profile accuracy and reduces the risk of tool chipping near shoulders, supporting finer detail work and repeatable part geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH8005 Wendeplatten - Tungaloy
Combining a PVD‑coated cemented carbide grade with a 0.2 mm nose radius and ISO compatibility, this insert delivers consistent, wear‑resistant performance for stable turning operations; order the CCMT09T302 AH8005 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T302 AH8005 CCMT turning insert — Tungaloy, PVD‑coated carbide, 0.2 mm radius The CCMT09T302 AH8005 is an ISO‑standard turning insert engineered for external and internal turning of heat‑resistant alloys and other hard materials, offering stable metal removal under robust machining conditions. ISO‑standard rhombic insert, 09 size PVD‑coated cemented carbide AH8005 0.2 mm nose radius for fine finishes Cylindrical hole with 40°–60° countersink Single‑sided chipbreaker for controlled chips High wear resistance and consistent cutting performance The combination of a PVD‑coated surface and a cemented carbide substrate gives long tool life and repeatable results when machining demanding alloys. The AH8005 grade is formulated for stable machining of heat‑resistant and hard workpieces, reducing flank wear and preserving cutting edge geometry. This results in fewer indexings and more predictable tool change intervals, improving process economy and supporting continuous production runs. The insert’s low nose radius contributes to improved surface finish without sacrificing edge strength. Clear guidance on holder compatibility and mounting Compatibility with a toolholder is defined by insert shape, clearance angle, tolerance class, fastening method, size and thickness. The rhombic form, 7° clearance angle and 09 size correspond to common ISO holders; the insert’s hole design — a cylindrical hole with a one‑sided countersink (40°–60°) — supports secure clamping and consistent seat location. Specifying a matching ISO CCMT external holder or boring bar and ensuring correct clamp and screw torque will maintain repeatable concentricity and minimise vibration during turning. Chip control and application suitability The single‑sided chipbreaker is tailored for predictable chip formation when turning both external and internal diameters. For mixed batches or varying stability, selecting the appropriate chipbreaker geometry and cutting data according to the workpiece material ensures reliable evacuation and reduces rework time. The grade’s PVD layer helps at higher cutting temperatures, so the insert is particularly effective for heat‑resistant alloys where thermal stability of the cutting edge is critical. Practical setup advice for productive turning Use the ISO‑compliant system build: the insert seated on a correct support pad, clamped with the recommended screw set and paired with a stable holder or boring bar to exploit the insert’s full potential. The 0.2 mm nose radius balances finish quality and edge robustness; consider modest increases in feed for roughing passes and finer feeds for finishing to leverage the radius for surface integrity. Where chip control is a priority, match the chipbreaker and adjust feed and speed to the material; for thin‑walled components, reduce cutting forces by optimising depth of cut and maintaining rigid workholding. For tailored advice on holders, cutting parameters and matching accessories for the Tungaloy CCMT09T302 AH8005 insert, contact Metav Werkzeuge — our specialists will provide application‑oriented recommendations and compatibility checks. Technical data Article number: 6775776 SKU: 6775776-Tungaloy Manufacturer SKU: TUN6775776 Model series: ISO turning inserts Material: cemented carbide Core data Insert designation: CCMT09T302 Insert size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Top angle: 80° Countersink angle: 40°–60° Special features PVD‑coated grade AH8005 Rhombic form Cylindrical hole with one‑sided countersink Single‑sided chipbreaker For external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for heat‑resistant alloys? Yes. The CCMT09T302 AH8005 insert uses a PVD‑coated cemented carbide grade designed specifically for wear resistance and thermal stability when machining heat‑resistant alloys. Can the insert be used for internal turning as well as external turning? Yes. The geometry and chipbreaker of the CCMT09T302 AH8005 support both external and internal turning when paired with a compatible ISO boring bar or holder. What determines which holder fits this insert? Holder compatibility depends on insert form, clearance angle (7°), tolerance class, fastening method, insert size (09) and thickness (3.97 mm); selecting an ISO CCMT‑compatible holder with matching seat and clamp is essential. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker provides reliable chip control for a range of materials and improves evacuation in many turning operations; matching chipbreaker style to workpiece material enhances process stability and surface finish. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Combining a PVD-coated carbide AH8015 grade, a precise 0.2 mm corner radius and the ISO CCMT form delivers consistent edge life and versatile performance for general turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal cutting data. CCMT 09T302 AH8015 Turning Insert (Tungaloy) — ISO rhombic indexable insert, PVD-coated carbide CCMT09T302 AH8015 is an ISO-format, rhombic indexable turning insert designed for both external and internal turning operations, especially where wear resistance and edge stability are required. PVD-coated carbide grade AH8015 0.2 mm corner radius for fine finishes Rhombic ISO CCMT 09 form, 80° cutting angle Single-sided chipbreaker, hole with countersink Durable performance for heat-resistant alloys The insert is supplied in a PVD-coated carbide grade AH8015, a combination optimised for machining heat-resistant and high-temperature alloys. The coating raises wear resistance while the substrate maintains cutting-edge stability, resulting in longer usable life under thermal and mechanical stress. For production environments, this balance reduces tool changes and downtime, supporting a continuous turning process with predictable tool-life intervals. Geometry that produces consistent surface quality The rhombic ISO CCMT09T302 geometry and an 80° cutting angle give a reliable cutting engagement and good access in shoulder and profiling work. The 0.2 mm corner radius enables improved surface finish without compromising edge strength, suitable for finishing passes or light semi-finishing where a controlled cutting line is required. The plate thickness of 3.97 mm supports rigidity, which helps to reduce vibration and improve repeatability of part tolerances. Built for easy mounting and secure clamping Compatibility with holders is determined by seat form, relief angle, tolerance class, fastening method, size and thickness; the insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) to fit standard clamping systems. Inserts are intended for use with a matching external holder or boring bar, base shim and clamping set, and replacement clamp screws. Choosing the correct seat and clamp prevents movement under cutting load and supports reproducible positioning during index changes. Single-sided chip control and application guidance The one-sided chipbreaker geometry supports predictable chip formation for a range of steels and alloys, improving evacuation during external and internal turning. For best results, select the chipbreaker and grade combination suitable for the workpiece material and machining stability; higher feeds and interrupted cuts will benefit from the robust edge provided by the AH8015 grade. Cutting parameters can be increased moderately compared with uncoated grades while maintaining acceptable tool life. For tailored cutting data, holder matching and immediate availability of genuine Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical advisors will recommend the best grade and clamping solution for the intended turning task. Technical data Article number: 6775777 Manufacturer SKU: TUN6775777 Model series: ISO turning indexable inserts Material: cemented carbide Grade: AH8015 ISO designation: CCMT09T302 Insert size: 09 Shape: rhombic Corner radius: 0.2 mm Thickness: 3.97 mm Core specifications Relief/clearance angle: 7° Cutting angle: 80° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Coating: PVD-coated Special features Suited to heat-resistant alloys Balanced wear resistance and edge stability ISO-compatible clamping and indexing Recommended for general-purpose turning and finishing FAQ What materials is this insert suited for? The CCMT09T302 AH8015 insert is designed primarily for heat-resistant alloys; the PVD-coated AH8015 grade provides a balanced combination of wear resistance and edge stability suitable for a wide range of challenging steels and alloys. How should the insert be clamped in a holder? Use a compatible ISO seat and the correct clamping set for the rhombic CCMT form; the CCMT09T302 AH8015 insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure secure and repeatable mounting. Can this insert be used for both external and internal turning? Yes — the geometry and single-sided chipbreaker make the CCMT09T302 AH8015 suitable for both external and internal turning operations when paired with the appropriate external holder or boring bar. What cutting edge life can be expected compared with uncoated grades? The PVD coating on the AH8015 grade improves wear resistance and typically extends edge life versus uncoated carbide under comparable cutting conditions, though actual life depends on material, feeds and cutting speed. Which suppliers supply genuine replacement inserts and technical advice? Metav Werkzeuge supplies genuine Tungaloy inserts such as the CCMT09T302 AH8015 and can provide holder-matching advice and cutting-parameter recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Reliable turning performance with long tool life is achieved by the combination of a PVD‑coated carbide grade and a compact 0.2 mm corner radius, ensuring stable chip control and consistent surface quality in demanding operations. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CCMT 09T302 AH8015 Tungaloy turning insert — PVD‑coated carbide, 0.2 mm radius The CCMT 09T302 AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys with a balanced focus on wear resistance and edge stability. ISO rhombic insert, 80° cutting angle PVD‑coated AH8015 for heat‑resistant alloys 0.2 mm corner radius for smooth finishing Cylindrical hole with 40°–60° countersink Engineered for reliable, efficient turning of difficult alloys The CCMT09T302 AH8015 insert combines a PVD‑coated carbide substrate with a geometry tailored to maintain edge life under elevated temperatures. The 80° cutting angle and rhombic form deliver rigidity for straight turning passes, while the single‑sided chipbreaker enhances chip formation under interrupted cuts. These technical choices translate into measurable shop‑floor benefits: longer tool life, reduced regrinding intervals and fewer workpiece rejects due to surface defects. Engineers and planners will appreciate the reproducible performance when processing heat‑resistant and high‑temperature alloys. Precision geometry for consistent surface finish and process stability The insert’s 0.2 mm corner radius and 7° clearance promote a controlled contact footprint that reduces vibration and enhances surface finish on turned components. The cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping in compatible toolholders, maintaining repeatable clamping position and torque. For manufacturers focused on dimensional accuracy and batch consistency, these features reduce setup time and improve first‑pass yield. Where finish is critical, the geometry aids in avoiding chatter and minimises the need for secondary operations. AH8015 grade: balanced wear resistance and edge stability The AH8015 grade is a versatile, PVD‑coated option selected for general machining of heat‑resistant alloys; it offers an equilibrium between abrasion resistance and cutting‑edge robustness. In practical terms, the grade supports productive cutting parameters without sacrificing reliability: steady flank wear progression, predictable tool life and stable cutting edges under fluctuating temperatures. For production environments that prioritise throughput and low variance, the grade helps to maintain machining windows and reduces unexpected downtime. Workshop compatibility and handling guidance These ISO‑standard inserts conform to established clamping and tolerance classes, so compatibility depends on holder form, free angle, fastening method, size and thickness. The plate thickness of 3.97 mm and 09 size suit a wide range of external holders and boring bars; the rhombic shape enables both finishing and moderate roughing tasks. Indexing and replacement are straightforward: use the defined screw and clamp set and check seating surfaces for cleanliness before tightening. Proper selection of the holder and cutting data ensures optimal chip control and tool life. For application advice on Tungaloy AH8015 inserts or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitable holders and cutting parameters Technical data Article number: 6951131 SKU: 6951131-Tungaloy Manufacturer SKU: TUN6951131 Manufacturer article number: 6951131 Manufacturer: Tungaloy Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 80° Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Special features ISO‑standard rhombic insert PVD‑coated grade AH8015 Material: carbide Single‑sided chipbreaker Compatible with external holders and boring bars Typical use: external and internal turning of heat‑resistant alloys FAQ What materials is this insert suitable for? The CCMT09T302 AH8015 Tungaloy turning insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for productive machining. Is the insert compatible with standard ISO toolholders? Yes. The ISO‑standard rhombic form, thickness of 3.97 mm and the defined hole/countersink make the insert compatible with matching holders that accept 09‑size plates. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a compromise between strength and finish: it supports good surface quality while protecting the cutting edge during moderate loads. What does the hole style mean for clamping? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure seating and repeatable clamping in holders designed for this hole style. Can the insert be used for interrupted cuts? The combination of the rhombic form, robust grade and single‑sided chipbreaker gives the insert increased resistance to edge chipping, making it suitable for light to moderate interrupted cutting. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 carbide for heat‑resistant alloys, ISO‑standard CCMT compatibility and a 0.2 mm corner radius for stable cutting performance. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCMT 09T302 AH8015 — Tungaloy turning indexable insert, PVD‑coated carbide The CCMT09T302 AH8015 is an ISO indexable insert for external and internal turning, engineered for balanced wear resistance and edge stability in heat‑resistant alloys. ISO‑standard CCMT insert, compatible with holders PVD‑coated carbide AH8015 for heat‑resistant alloys 0.2 mm corner radius for reliable edge stability Cylindrical hole with single‑sided countersink Higher productivity when machining heat‑resistant alloys The PVD‑coated AH8015 grade combines carbide substrate strength with a wear‑resistant surface layer to deliver a balance between edge stability and longevity. This combination makes the insert particularly suitable for parts manufactured from heat‑resistant alloys where thermal loads and abrasive wear shorten tool life. The protective coating reduces flank wear and helps maintain a consistent cutting edge, which in turn supports higher material removal rates and fewer tool changes—resulting in measurable gains in machine uptime and process economy. Clear compatibility reduces setup time ISO conformity and the CCMT geometry ensure compatibility with a wide range of standard external holders and drill‑rod style carriers. The rhombic plate form and included angle 80° provide a predictable seating and force direction during turning operations. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) secures repeatable clamping and simple replacement without special adapters. Compatibility is determined by form, relief angle, tolerance class, fastening and plate dimensions, so selection of the correct holder and clamping set is essential for a stable process. Consistent surface quality with controlled chip formation The 0.2 mm corner radius strengthens the cutting edge against chipping while the single‑sided chipbreaker manages chip flow for most turning tasks. A defined corner radius increases edge robustness when interrupted cuts or variances in feed occur, improving resistance to mechanical shock. The chipbreaker geometry is optimised for turning; it eases chip evacuation and contributes to consistent surface finishes by preventing uncontrolled chip re‑cutting. For operators with limited experience in carbide grades, the chipbreaker and radius together provide a forgiving balance between finish and tool life. Practical selection and application guidance For reliable results, match the AH8015 grade and the single‑side chipbreaker to the workpiece material and the machine setup. The insert suits both external and internal turning; choose a holder that supports the plate thickness of 3.97 mm and the plate size to maintain rigidity. When machining heat‑resistant alloys, prioritise stable clamping and conservative axial depths on first trials, then increase cutting parameters as process stability is proven. The combination of PVD coating, grade and geometry enables an efficient trade‑off between productivity and predictable tool life for batch and single‑part production alike. For assured performance with Tungaloy turning inserts, contact Metav Werkzeuge for tailored advice and availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951116 Manufacturer SKU: TUN6951116 Model series: ISO‑indexable turning inserts Material: carbide Grade: AH8015 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Special features PVD‑coated carbide, grade AH8015 Rhombic plate form Cylindrical hole with single‑sided countersink (40°–60°) Single‑sided chipbreaker ISO indexable insert for external and internal turning Suitable for heat‑resistant alloys FAQ Which materials is this insert intended for? The CCMT09T302 AH8015 insert from Tungaloy is intended primarily for machining heat‑resistant alloys, offering a compromise between wear resistance and edge stability suited to these demanding materials. Is the CCMT09T302 compatible with standard CCMT holders? Compatibility follows ISO CCMT geometry, but correct seating requires matching holder form, relief angle, tolerance class, fastening method, plate size and thickness to ensure secure clamping. What benefit does the AH8015 coating provide? The PVD coating on the AH8015 grade reduces abrasive wear and improves thermal resistance, contributing to longer flank life and steadier cutting performance in high‑temperature applications. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius enhances cutting edge toughness and helps prevent chipping under variable loads, while still permitting fine surface finishes when feeds are adjusted appropriately. What chip control can be expected with the single‑sided chipbreaker? The single‑sided chipbreaker directs chip flow for turning operations, aiding evacuation and reducing the risk of re‑cutting, which supports consistent surface quality and safer cycle operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high‑quality finishing, consistent wear resistance and ISO compatibility for predictable machining results; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the team for application advice. CCMT 09T302 AT9530 Tungaloy indexable turning insert, rhombic, 0.2 mm radius The CCMT 09T302 AT9530 is an ISO‑standard indexable turning insert designed for finishing and light turning of steel components. ISO standard rhombic insert 09 size Coated cermet grade AT9530 for fine finishing 0.2 mm corner radius for accurate profiles 7° clearance angle for reliable contact Superior surface quality for finishing passes The coated cermet grade AT9530 is engineered for finishing and light machining of steel, delivering a noticeably improved surface finish and reduced tendency for built‑up edge. The material combination provides uniform wear across the cutting edge, which helps to maintain dimensional accuracy over repeated indexings. Specified as a finishing grade, the insert is optimised to produce consistent topography on turned parts while keeping the risk of thermal and mechanical damage to a minimum. Predictable fitting and geometry for efficient setup As an ISO‑conforming rhombic insert, CCMT09T302 offers straightforward interchangeability in compatible toolholders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The geometry includes a 0.2 mm corner radius and 7° clearance, which together allow for precise profile generation and controlled tool‑workpiece contact. The insert’s rhombic shape and standard fixing hole simplify clamping on external holders and boring bars, reducing setup time and supporting repeatable machining cycles. System integration and process benefits The insert is intended for use as part of a complete tool system comprising an ISO turning insert, a matching external holder or boring bar, a clamp plate and replacement screws. With a single‑sided chipbreaker and the grade’s wear characteristics, the component supports consistent chip formation and reduced rework in finishing operations. Selecting the correct chipbreaker and grade for the workpiece and machining conditions improves productivity and lowers unit cost through fewer tool changes and predictable tool life. For precision finishing of steel parts, request technical advice from Metav Werkzeuge and specify the genuine Tungaloy CCMT 09T302 AT9530 insert for consistent results; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 and can advise on holder compatibility and process settings. Technical data Article number: 6773729 Manufacturer SKU: TUN6773729 Model series: ISO‑turning indexable inserts Product name: CCMT09T302 AT9530 Tungaloy insert Core specifications Corner radius: 0.2 mm Clearance angle: 7° Insert thickness: 3.97 mm Insert size: 09 Included hole: with hole Design & features Coated cermet grade AT9530 Rhombic insert geometry Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Application: turning; finishing and light machining of steel FAQ What materials is this insert suited for? The CCMT 09T302 AT9530 insert is specified for finishing and light machining of steel; the AT9530 coated cermet grade focuses on achieving superior surface finish and controlled wear when turning steel components. How does the insert fix to the holder? The insert features a central hole with a cylindrical bore and a single‑side countersink (40°–60°), designed for clamping with a matched clamp plate and screw in ISO external holders or boring bars compatible with CCMT geometry. What size and geometry should be expected for profile work? This indexable insert is size 09, rhombic in shape, with a 0.2 mm corner radius and a 7° clearance angle, making it suitable for accurate profile generation and fine finishing passes. Can the chip control be adapted for different operations? The insert comes with a single‑sided chipbreaker; matching the chipbreaker and grade selection to the workpiece and machining parameters will optimise chip formation and tool life for finishing tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 DX120 Wendeplatten - Tungaloy
Benefit from the combination of the DX120 PCD cutting grade, a precise 0.2 mm cutting-edge radius and robust rhombic geometry to achieve higher cutting speeds and extended tool life; order the Tungaloy insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. CCMT09T302 DX120 Tungaloy turning insert — PCD grade for high-speed aluminium and non-ferrous machining CCMT09T302 DX120 is a rhombic ISO turning insert engineered for high-speed machining of aluminium, non-ferrous and abrasive non-metallic materials, supplied with a single-sided chipbreaker and a cylindrical hole with one-sided countersink. PCD grade DX120 for aluminium machining Single-sided chipbreaker for stable chip control 80° rhombic geometry for versatile turning Cylindrical hole with 40°–60° countersink Increase throughput with a PCD grade made for aluminium The polycrystalline diamond (PCD DX120) cutting material delivers exceptional wear resistance when machining aluminium and other non-ferrous alloys, enabling significantly higher cutting speeds and longer tool life compared with conventional grades. This results in shorter cycle times and fewer insert changes, which directly improves process economy and reduces downtime. The high abrasion resistance also supports consistent surface finish over extended production runs. Geometry and secure clamping for repeatable accuracy The rhombic 80° insert form combined with a 7° clearance angle and a 0.2 mm corner radius provides a balance between robustness and fine surface generation. Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the ISO designation ensures straightforward matching to standard external holders or boring bars. The supplied cylindrical hole with one-sided countersink (40°–60°) supports reliable clamping and simple screw replacement. Application-specific chip control and material guidance A single-sided chipbreaker must be selected in conjunction with the DX120 grade to match the workpiece material and machining stability. This combination is optimised for aluminium, Messing and abrasive non-metals where chip formation and evacuation are critical. The insert’s characteristics favour continuous, stable chips and minimise built-up edge, helping to maintain dimensional accuracy and reduce secondary finishing. Practical benefits for production and tooling strategy Integrating high-performance inserts of this specification into a turning cell reduces tooling intervals and increases first-pass yield. The design supports both external and internal turning operations when paired with an appropriate holder, underlining the importance of selecting holders and clamping sets that match the insert’s form and dimensions. Over the life cycle, fewer tool changes and consistent part quality result in lower unit costs and greater process reliability. For high-speed aluminium turning with Tungaloy expertise, contact Metav Werkzeuge for product availability and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6822153 Manufacturer SKU: TUN6822153 SKU: 6822153-Tungaloy Designation: CCMT09T302 Model series: ISO turning inserts Brand: Tungaloy Numbers / Core technical data Insert size: 09 Insert thickness: 3.97 mm Clearance angle: 7° Approach/lead angle: 80° Corner radius: 0.2 mm Designs / Special features Cutting material: polycrystalline diamond (PCD) Grade: DX120 Insert shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Material compatibility: aluminium, non-ferrous metals, abrasive non-metals Substrate/material: cemented carbide FAQ What materials is this insert best suited for? The DX120 PCD grade insert is optimised for aluminium, Messing and abrasive non-metallic materials; the PCD cutting material provides extended life and excellent surface quality in these applications. How does the chipbreaker affect performance? The single-sided chipbreaker controls chip form for stable evacuation during turning operations; selecting the chipbreaker that matches the workpiece and machining parameters is important for optimal results. Which holders are compatible with this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; use standard ISO-compatible external holders or boring bars designed for CCMT-style inserts. What does the DX120 designation mean in practice? DX120 identifies the PCD grade engineered for high cutting speeds on aluminium and similar materials, offering improved wear resistance and longer tool life compared with conventional grades. Is the insert supplied with mounting hardware? The insert is supplied as the cutting plate; the full system comprises the ISO insert, a matching external holder or boring bar, a seating pad/clamp set and replacement screws as required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com