XPMT 040104 AH7030 Wendeplatten - Tungaloy
Combining PVD-coated AH7030 wear resistance with a 0.4 mm corner radius delivers consistent hole quality and longer tool life; order via Metav Werkzeuge or contact their consultants for specification support. XPMT 040104 AH7030 — XPMT040104R-DW insert for drilling by Tungaloy The XPMT040104R-DW AH7030 is a PVD-coated carbide insert designed for interchangeable full-bore drilling systems with TDX bodies, optimised for process security and sharp cutting performance. PVD-coated AH7030 grade for wear resistance 0.4 mm corner radius for precise hole edges Compatible with TDX full-bore drilling systems Cylindrical hole with single-side countersink Secure drilling through optimised coating and grade The combination of a PVD-coated carbide substrate and the AH7030 grade provides a balance between wear resistance and edge stability. This material pairing reduces flank and crater wear under typical drilling conditions, which in turn maintains dimensional accuracy over longer production runs. Emphasis on a stable cutting edge means fewer interruptions for reconditioning or insert changes, improving overall process efficiency while delivering repeatable hole geometry. Geometry and chip control that improves cycle reliability A 0.4 mm corner radius contributes to robust edge strength without sacrificing hole finish, while the DW chipbreaker helps manage chips in through-hole drilling. The insert’s cylindrical hole with single-side countersink (40°–60°) supports reliable coolant feed and secure mounting, reducing the risk of insert movement. Together these features enhance chip evacuation and temperature control, which lowers the likelihood of edge breakdown and supports consistent cycle times. System compatibility for fast integration and flexible setups Designed for use in TDX bodies (TDX/C-TDX), the insert is part of a modular full-bore drilling family that is differentiated by overhang (L/D) and interface. The system comprises the drill body, XPMT inserts, clamping screws and the required key, enabling straightforward assembly and repeatable clamping. Specifying the correct diameter, L/D ratio and shank for the machining centre keeps setup time down and simplifies inventory by using a common insert type across multiple body lengths. Application guidance and process benefits Engineered for general drilling tasks where a sharp cutting edge and process security are required, the insert’s wear- and break-resistant character suits interrupted cuts and varying component materials. The PVD coating increases thermal resistance, allowing competitive cutting parameters while maintaining surface finish. For selection, match insert size and geometry to the chosen body and machining strategy; Metav Werkzeuge can advise on combinations to meet throughput and surface quality targets. Choose Tungaloy AH7030 inserts when process reliability and consistent hole quality are priorities — contact Metav Werkzeuge for application support, detailed specification assistance and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6970293 SKU manufacturer: TUN6970293 SKU: 6970293-Tungaloy Label: XPMT040104R-DW AH7030 Model series: TungDrillTwisted Material: carbide Application: Drilling Facts Corner radius: 0.4 mm Plate thickness: 1.59 mm Clearance angle: 11° Plate size: 04 ISO designation: 040104 Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Coating: PVD, grade AH7030 Chipbreaker: DW Plate shape: special Compatible with TDX/C-TDX drilling bodies System components: XPMT inserts, clamping screws, key Designed for sharp cutting edge and process security Wear- and break-resistant grade for drilling Family differentiated by overhang (L-D) and interface FAQ What materials is this insert intended for? The insert in grade AH7030 is specified for demanding drilling operations requiring a sharp cutting edge and process security; its PVD-coated carbide construction supports a broad range of workpiece materials commonly encountered in general drilling. How is the insert clamped in the drilling system? Clamping is achieved using the system’s clamping screws and key as part of the TDX/C-TDX drill body assembly; the cylindrical hole with single-side countersink secures the insert and supports coolant routing. Can this insert be used across different overhangs (L/D ratios)? Yes, the TungDrillTwisted family is differentiated by overhang and interface, allowing selection of an appropriate body and L/D ratio while retaining the same XPMT insert geometry for flexibility. What benefits does the DW chipbreaker provide? The DW chipbreaker promotes controlled chip formation and evacuation during full-bore drilling, improving cycle reliability and reducing the risk of built-up edge or tool failure. Which component parts form the complete drilling system? The system comprises the TDX/C-TDX drill body, XPMT inserts, clamping screws and the assembly key; these elements together deliver repeatable clamping and simple integration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 040104 AH725 Wendeplatten - Tungaloy
Take advantage of a modular drilling solution that combines a PVD‑coated carbide grade AH725 with a proven indexable‑insert full‑drill concept and TDX drill bodies for reliable, repeatable holemaking. The package delivers process security for mixed‑material production and straightforward insert selection; order directly via Metav Werkzeuge or consult their specialists for application guidance. XPMT 040104 AH725 indexable insert for drilling — PVD‑coated carbide, r0.4 — Tungaloy A XPMT040104R‑DW AH725 indexable insert designed for TDX full‑drill systems, intended for general drilling in steel and stainless steels and optimised for high process security PVD‑coated carbide AH725 for mixed materials Suitable for TDX full‑drill bodies 0.4 mm corner radius for precise hole entry Cylindrical hole with single‑side countersink (40°–60°) Consistent performance and process security for drilling The XPMT insert is built on a PVD‑coated carbide substrate in grade AH725, a universal, breakout‑resistant formulation suited to steel and stainless steels. This composition combines wear resistance with controlled chip formation, which helps to maintain a stable cutting edge and reduces the frequency of unexpected edge failures. For operations that switch between materials or require dependable cycle times, this insert supports reproducible results and lower scrap rates. Precision geometry reduces rework and improves hole quality With a 0.4 mm corner radius and an 11° free angle, the insert geometry eases entry and distributes cutting forces to lower vibration and deflection. The special plate form and the DW chipbreaker manage chips effectively, while the cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping on the TDX carrier. Together, these features lead to a cleaner hole profile, reduced need for secondary finishing, and consistent diameters across batches. Modular system benefits: fast changeovers and predictable tooling costs The insert is part of the TungDrillTwisted family of interchangeable components: TDX drill bodies, XPMT inserts, clamping screws and keys. The modular concept enables quick insert changes without removing the drill body, reducing machine downtime and simplifying tool inventory. For workshops seeking to balance flexibility with repeatability, the system offers an efficient route to standardised set‑ups and straightforward reconditioning of cutting edges. Materials and machining recommendations The grade and geometry are selected for general drilling; use the insert in conjunction with TDX bodies matched to the required overhang and L/D ratio. The 1.59 mm plate thickness and size 04 suit compact, high‑security applications where insert seating and coolant delivery are critical. Where possible, verify cutting data against machine rigidity and coolant type to exploit the AH725 grade’s ability to handle variable materials without compromising tool life. Contact Metav Werkzeuge for application advice and availability of Tungaloy AH725 inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6861373-Tungaloy Manufacturer SKU: TUN6861373 Manufacturer article number: 6861373 Brand: Tungaloy Model series: TungDrillTwisted Facts Corner radius: 0.4 mm Plate thickness: 1.59 mm Free angle: 11° ISO designation: 040104 Plate size: 04 Special features Insert designation: XPMT040104R‑DW AH725 Coating: PVD Material: carbide Chipbreaker: DW Hole style: cylindrical hole + single‑side countersink (40°–60°) Plate form: special Typical application: drilling System build: TDX/ C‑TDX drill bodies with XPMT inserts, clamping screws and key FAQ What materials is the XPMT040104R‑DW AH725 suited for? The Tungaloy XPMT040104R‑DW AH725 insert is formulated for steel and stainless steels, offering stable chip control and process security when machining mixed batches. How does the chipbreaker DW influence drilling performance? The DW chipbreaker on the XPMT insert promotes short, controllable chips that reduce evacuation issues and help maintain a consistent cutting edge during prolonged drilling cycles. Can the insert be used in any TDX drill body? Yes, the insert is intended for the TungDrillTwisted TDX family; ensure the chosen TDX body matches the required overhang and L/D ratio for the application. What does the ISO code 040104 indicate? The ISO code 040104 defines the insert’s geometry and size class; it corresponds to the 04 plate size and the specific corner radius and relief angles used in this insert design. Is the AH725 grade suitable for varying workpiece materials? The AH725 PVD‑coated grade is a universal, breakout‑resistant carbide designed to handle a range of steels and stainless steels, making it appropriate where material types vary or process reliability is critical. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 040104 AH740 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH740 grade and the precise 0.4 mm corner radius for improved chip control and dependable edge life; order directly via Metav Werkzeuge or consult our specialists for application support. XPMT 040104 AH740 – Indexable insert for drilling by Tungaloy The XPMT 040104 AH740 indexable insert is designed for general drilling within the TungDrillTwisted TDX system and for straightforward integration into TDX/C‑TDX drill bodies. PVD-coated carbide grade AH740 for wear resistance Compatible with TDX indexable drilling systems Cylindrical hole with single-sided countersink Corner radius 0.4 mm and 11° clearance angle Consistent performance through coating and grade selection The combination of a PVD-coated surface and cemented carbide substrate in the AH740 grade provides a balance between wear resistance and a sharp cutting edge. This translates into longer tool life and process security in batch and continuous drilling operations. The coating reduces adhesion and heat build-up at the cutting edge, while the substrate maintains toughness to resist chipping under varying cutting conditions. As part of the TungDrillTwisted family, the insert is intended for use in TDX drill bodies, enabling repeatable performance across similar setups. Practical advantages for stable drilling and chip control The insert’s geometry supports reliable chip formation: the chipbreaker DW is optimised for clearing swarf in common drilling tasks, and the cylindrical hole with single-sided countersink assists secure clamping and alignment on the seat. The small corner radius 0.4 mm combined with an 11° clearance angle provides a clean entry and reduced cutting forces, which benefits hole quality and tool life. With a plate thickness of 1.59 mm and the special plate form, the insert offers mechanical stability for a wide range of diameters and L/D ratios; selection of diameter, L/D, shank and the appropriate insert should be matched to machine capability, workpiece material and cooling strategy for optimum results. System approach and application benefits for production Using the insert together with TDX/C‑TDX drill bodies, clamping screws and the recommended keys delivers a modular drilling system that simplifies inventory and increases machine uptime. The insert is particularly suitable for general drilling operations where a combination of process reliability and resistance to chipping is required. Operators gain predictable hole quality and reduced rework, while production planners benefit from the straightforward replacement routine and the availability of matching components in the TungDrillTwisted range. For tailored advice on integrating the Tungaloy AH740 inserts in your machining process or to order compatible TungDrillTwisted components, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Item SKU: 6821615-Tungaloy Manufacturer article number: 6821615 Manufacturer SKU: TUN6821615 Manufacturer: Tungaloy Model series: TungDrillTwisted Application: Drilling Core specifications Insert designation: XPMT040104R-DW ISO code: 040104 Grade: AH740 Material: Cemented carbide Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 1.59 mm Plate size: 04 Features and compatibility PVD coating Chipbreaker DW Hole: cylindrical hole + single-sided countersink (40°–60°) Plate form: Special Compatible with TDX drill bodies System composition: TDX/C‑TDX bodies, XPMT inserts, clamping screws, key FAQ Is this insert suitable for general-purpose drilling in steel? The XPMT040104R-DW AH740 indexable insert (Tungaloy, SKU 6821615-Tungaloy) is designed for general drilling and is appropriate for a range of steel applications when paired with the correct TDX drill body and machining parameters. How does the AH740 grade affect tool life and process security? The AH740 grade combines a wear-resistant PVD coating with a tough substrate to reduce chipping and extend edge life, improving process security in repetitive drilling cycles. What is the role of the chipbreaker DW on this insert? The chipbreaker DW is tuned to produce controllable chips and efficient evacuation during drilling, which reduces the risk of re-cutting and helps maintain hole integrity. Can this insert be used with any TDX body length or does it depend on L/D ratio? The insert is part of the TungDrillTwisted family and can be used across TDX body variants; selection of body length and L/D ratio should match the intended drilling depth, machine rigidity and coolant conditions. Which features support secure clamping and accurate seating of the insert? The insert’s cylindrical hole with a single-sided countersink ensures reliable clamping and alignment on the seat, contributing to consistent hole quality and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH6030 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant PVD-coated AH6030 grade and a modular TDX body system for reliable, repeatable drilling performance; order the XPMT050204R-DW AH6030 directly via Metav Werkzeuge or ask our consultants if needed. XPMT050204R-DW AH6030 – Indexable Insert for Full-Bore Drilling (Tungaloy) The XPMT050204R-DW AH6030 is an indexable insert for a full-bore drilling family designed for general drilling tasks and differentiated by overhang (L/D) and interface, compatible with TDX/C‑TDX drill bodies PVD-coated AH6030 grade for edge stability Modular TDX bodies for easy system set-up Indexable full-bore drilling with XPMT insert Cylindrical hole with single-side countersink option Engineered for efficient, modular production drilling The TungDrillTwisted family is a modular full-bore drilling system built for production environments where flexibility and repeatability matter. The insert can be combined with TDX or C‑TDX drill bodies and secured with standard clamping screws, enabling fast tool changes and reduced machine downtime. By selecting the correct diameter, L/D and shank interface, shops achieve an optimised cutting arrangement that enhances tool life and machining throughput while simplifying inventory management. Improved edge life and process security with AH6030 The AH6030 grade is a PVD‑coated carbide designed for wear and fracture resistance where a sharp cutting edge and process security are required. This combination reduces the risk of premature edge chipping and supports consistent hole quality over longer production runs. The integrated chipbreaker (DW) promotes controlled chip formation, which contributes to stable cutting forces and more predictable tool life—key factors for minimising interruptions in series production. Ease of integration and predictable set-up The system architecture—TDX/C‑TDX bodies, XPMT replaceable inserts, clamping screws and key—permits straightforward integration into existing toolholders and machine set-ups. The insert’s special plate form and the cylindrical hole with a single-side countersink (40°–60°) ensure secure seating and reliable clamping. For machining centres requiring varied overhangs, the family’s differentiation by L/D provides options to match rigidity requirements and minimise chatter for consistent surface finish and dimensional accuracy. Practical application notes and selection guidance Designed primarily for general drilling applications, the insert offers flexibility when process security and reproducible results are priorities. The 0.4 mm corner radius and 11° relief angle balance edge strength with cutting performance; the 2.38 mm plate thickness and size 05 format suit compact, repeatable indexable insert usage. When choosing the correct variant, consider machine rigidity, coolant strategy and the required L/D ratio; matching these parameters with the TungDrillTwisted system yields predictable, cost‑efficient production. Contact Metav Werkzeuge today to discuss the XPMT050204R-DW AH6030 in the TungDrillTwisted system and to receive tailored advice on selecting the optimal L/D and body interface for the application Technical data Article number: 6718271 SKU: 6718271-Tungaloy Manufacturer SKU: TUN6718271 Model series: TungDrillTwisted Insert designation: XPMT050204R-DW Facts Corner radius: 0.4 mm Relief (free) angle: 11° Plate thickness: 2.38 mm Plate size: 05 ISO code: 050204 Special features Material: Hartmetall (carbide) Coating / grade: AH6030 (PVD-coated carbide) Chipbreaker: DW Plate form: Sonder Hole: with hole; cylindrical hole + single-side countersink (40°–60°) System components: TDX/C‑TDX bodies, XPMT inserts, clamping screws and key Typical application: General drilling; family differentiated by overhang (L/D) and interface FAQ What is the recommended application for this insert? The XPMT050204R-DW AH6030 insert in the TungDrillTwisted system is intended for general drilling tasks where a sharp cutting edge and process security are required. Which components are needed to assemble the complete drilling system? The full system comprises TDX or C‑TDX drill bodies, XPMT replaceable inserts, clamping screws and the assembly key as specified for the TungDrillTwisted family. What makes AH6030 suitable for production use? AH6030 is a PVD‑coated carbide grade that offers wear and fracture resistance, supporting consistent edge life and stable cutting performance in repetitive machining. What are the key geometric data points for the insert? The insert features a 0.4 mm corner radius, an 11° relief angle, a plate thickness of 2.38 mm and a plate size 05 with ISO designation 050204. How should one select the correct overhang (L/D) and interface? Choose the variant from the TungDrillTwisted family based on the required rigidity and machine compatibility; the family is differentiated by overhang (L/D) and interface to match specific machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH6030 Wendeplatten - Tungaloy
XPMT 050204 AH6030 XPMT050204 Tungaloy-Wendeplatte für Bohren Die XPMT050204 AH6030 Tungaloy-Wendeplatte ist eine PVD-beschichtete Hartmetall-Wendeplatte für Wechselplatten-Vollbohrsysteme mit TDX-Bohrkörpern und wurde für prozesssichere Bohroperationen entwickelt PVD-beschichtete Hartmetall-Wendeplatte AH6030 Verschleiß- und ausbruchfeste Schneidkante Einseitiger Spanbrecher für stabile Spanformung Mit zylindrischem Loch und einseitiger Senkung 40°–60° Eckenradius 0,4 mm und Freiwinkel 11° Hohe Prozesssicherheit durch AH6030-Beschichtung Die AH6030-Sorte liefert eine Kombination aus harter Beschichtung und zäher Substanz, die speziell für das Bohren ausgelegt ist. Durch die PVD-Beschichtung entsteht eine scharfe Schneidkante, die Wiederholgenauigkeit und lange Standzeit unterstützt. Anwender profitieren von konstanter Werkstückqualität und reduzierten Nachbearbeitungszeiten, weil der Verschleiß gleichmäßig verläuft und Ausbrüche an der Schneide minimiert werden Präzision und Systemkompatibilität im Wechselplatten-Vollbohrsystem Die Platte wurde für den Einsatz in TDX/C-TDX-Bohrkörpern konzipiert und bietet dank standardisierter Schnittstelle eine einfache Integration in vorhandene Systeme. Der Eckenradius von 0,4 mm und der Freiwinkel 11° ermöglichen saubere Bohrbilder bei definierten Schnittbedingungen. Damit lassen sich wiederholbare Ergebnisse erzielen und die Einrichtung am Bearbeitungszentrum vereinfacht gestalten Anwendernutzen: Effizienz und robuste Spanbildung Der einseitige Spanbrecher der Platte sorgt für kontrollierte Spanabfuhr und reduziert Tool-Interaktionen bei längeren Bohrungen. In Kombination mit der robusten Hartmetall-Substanz entsteht eine stabile Spanbildung, die die Standzeit erhöht und die Ausfallzeiten in der Fertigung senkt. Die Platte ist damit besonders geeignet für Serienfertigung und anspruchsvolle Werkstoffe im Bohren Einsatzempfehlung und Maschinenanpassung Bei der Auswahl von Durchmesser, L/D-Verhältnis, Schaft und Schnittwerten empfiehlt sich eine Abstimmung auf Maschine, Werkstoff und Kühlstrategie. Die Wendeplatte ist prädestiniert für Anwender, die auf Prozesssicherheit und reproduzierbare Bohrergebnisse setzen. Für spezielle Maschinenkonfigurationen empfiehlt sich die technische Abstimmung mit der Beratung, um die optimale Kombination aus Bohrkörper und Schnittwerten zu ermitteln Empfehlung: Für produktive, prozesssichere Bohrungen die AH6030-beschichtete Wendeplatte von Tungaloy verwenden; bei Bedarf technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6718278 Marke: Tungaloy Modellserie: TungDrillTwisted Bezeichnung: XPMT050204 Hersteller SKU: TUN6718278 Fakten Eckenradius: 0,4 mm Plattendicke: 2,38 mm Freiwinkel: 11° Plattengröße: 05 Besonderheiten Schneidstofftyp: PVD-beschichtetes Hartmetall (dünnfilm) Sorte: AH6030 (verschleiß- und ausbruchfest) Spanbrecher: einseitig Lochtyp: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Einsatz: Bohren System: Wechselplatten-Vollbohrsystem mit TDX-Bohrkörpern FAQ Welche Vorteile bietet die AH6030-Sorte beim Bohren? Die AH6030-Sorte der XPMT050204 AH6030 Tungaloy-Wendeplatte kombiniert hohe Verschleißfestigkeit mit Ausbruchresistenz, was zu längeren Standzeiten und stabiler Spanbildung führt Ist die Wendeplatte mit TDX-Bohrkörpern kompatibel? Ja, die Platte ist für das Wechselplatten-Vollbohrsystem mit TDX/C-TDX-Bohrkörpern ausgelegt und lässt sich über die standardisierte Schnittstelle sicher spannen Für welche Anwendungen ist die Platte besonders geeignet? Die Platte eignet sich vor allem für produktive Bohranwendungen, bei denen Prozesssicherheit und konstante Oberflächenqualität gefordert sind Welche Rolle spielt der einseitige Spanbrecher? Der einseitige Spanbrecher sorgt für kontrollierte Spanabfuhr und reduziert den Werkzeugwechselaufwand durch stabilere Spanformung Ist die Platte für harte oder zähe Werkstoffe geeignet? Die Kombination aus Hartmetall-Substanz und PVD-Beschichtung macht die Wendeplatte robust gegenüber Verschleiß und Ausbrüchen, weshalb sie sich für anspruchsvolle Werkstoffe beim Bohren empfiehlt Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 050204 AH6030 Wendeplatten - Tungaloy
XPMT 050204 AH6030 Wechselplatten-Vollbohrsystem von Tungaloy Das XPMT 050204 AH6030 ist eine verschleiß- und ausbruchfeste Wendeplatte für Wechselplatten-Vollbohrsysteme mit TDX-Bohrkörpern, konstruiert für prozesssichere Allgemeinbohranwendungen PVD-beschichtetes Hartmetall AH6030 Optimierter Spanformer DJ für stabile Spanbildung Kompatibel mit TDX/TDX-C Bohrkörpern Eckenradius 0,4 mm für saubere Bohrbilder Prozesssichere Verschleißresistenz für Dauereinsatz Die PVD-beschichtete Hartmetallsortenklasse AH6030 bietet gezielt hohe Verschleißfestigkeit und Bruchzähigkeit, sodass die Standzeit unter Serienbedingungen steigt. Dieser Vorteil sorgt für weniger Werkzeugwechsel und höhere Maschinenauslastung, weil die scharfe Schneidkante länger erhalten bleibt. Für Anwender bedeutet das planbare Laufzeiten und reduzierte Stillstandszeiten. Passgenauigkeit und Integration in TDX-Systeme Der Aufbau als Wechselplatten-System erlaubt einen schnellen Plattenwechsel auf TDX-Bohrkörpern, wodurch Rüstzeiten minimiert werden. Die Kombination aus Plattenform, Befestigungsloch (zylindrisches Loch plus einseitige Senkung 40°–60°) und definiertem Freiwinkel gewährleistet reproduzierbare Einspannverhältnisse und konstante Bohrbilder bei variierendem L/D‑Verhältnis. Präzision durch feinen Eckenradius und Spanform Der Eckenradius 0,4 mm trägt zu sauberer Anlaufkante und verbesserten Oberflächen bei, besonders in instandhaltungsintensiven Bohrungen. Der Spanformer DJ ist so gestaltet, dass Späne kontrolliert gebrochen und abgeführt werden; das reduziert Ausbrüche an der Schneidkante und verbessert die Prozesssicherheit. Erläuterung: Ein Spanformer ist die Geometrie, die den Span in handhabbare Stücke lenkt. Material- und Konstruktionsvorteile erklärt Die Kombination aus Hartmetall-Substrat und PVD-Beschichtung vereint Zähigkeit und Härte: Das Substrat sorgt für Stoßfestigkeit, die Beschichtung erhöht Verschleißbeständigkeit und Temperaturresistenz. Für Anwender ohne tiefes Fachwissen: PVD steht für Physical Vapour Deposition und ist ein Verfahren, das feine Hartstoffschichten aufträgt, um Abrieb zu reduzieren. Einsatzbereich und Zielgruppe Entwickelt für Anwender, die prozesssichere Allgemeinbohrungen auf Dreh‑/Fräszentren benötigen, eignet sich diese Wendeplatte für variierende L/D-Verhältnisse und mittlere bis hohe Schnittparameter. Besonders geeignet ist sie für Betriebe mit Serienfertigung, die Produktivität und Standzeit priorisieren. Für bestmögliche Prozessstabilität empfiehlt Metav Werkzeuge die XPMT 050204 AH6030 von Tungaloy; bei technischen Fragen steht die Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 6718257 Marke: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT Daten Eckenradius: 0,4 mm Freiwinkel: 11° Plattendicke: 2,38 mm Plattengröße: 05 ISO-Code: 050204 Besonderheiten Material: Hartmetall Beschichtung: AH6030 (PVD-beschichtet) Spanbrecher: DJ (optimierte Spanformer) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel FAQ Wie lässt sich die Standzeit der XPMT 050204 AH6030 im Betrieb optimieren? Die Standzeit der XPMT 050204 AH6030 von Tungaloy steigt durch angepasste Schnittparameter und ausreichende Kühlung; zudem reduziert die PVD-Beschichtung AH6030 thermisch bedingten Verschleiß. Regelmäßige Kontrolle der Einspannung auf dem TDX-Bohrkörper verhindert ungleichmäßigen Verschleiß. Für welche Werkstoffe ist diese Wendeplatte geeignet? Die XPMT 050204 AH6030 ist für eine breite Werkstoffabdeckung ausgelegt; die Kombination aus Hartmetall und AH6030-Beschichtung bietet besonders in Stahl‑ und rostfreiem Stahl‑Bearbeitung gute Ergebnisse bei stabiler Spanbildung. Welchen Nutzen bringt der Eckenradius 0,4 mm konkret? Der Eckenradius 0,4 mm verbessert die Kantenausbildung und die Oberflächenqualität der Bohrung; kleine Radien reduzieren Versatz an der Bohrungswand und verringern das Risiko von Kantenausbrüchen bei instationären Zuständen. Wie wird die Platte befestigt und passt sie auf vorhandene Bohrköpfe? Die Wendeplatte XPMT050204R-DJ verfügt über ein zylindrisches Befestigungsloch mit einseitiger Senkung und ist für den Einsatz auf TDX‑ und TDX‑C‑Bohrkörpern konzipiert; die passenden Spannschrauben gehören zum Systemaufbau. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 050204 AH7020 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH7020 grade for extended tool life, a 0.4 mm corner radius for consistent hole geometry and the DJ chipbreaker for dependable chip evacuation; order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. XPMT 050204 AH7020 indexable drilling insert for TDX drill bodies — Tungaloy The XPMT050204R-DJ AH7020 is an indexable full-bore insert designed for TDX drill bodies, engineered to deliver stable, wear-resistant performance in general drilling applications. PVD-coated carbide AH7020 for wear resistance Precise 0.4 mm corner radius for repeatable holes DJ chipbreaker for stable chip control Cylindrical hole with one-sided countersink for secure clamping High process security through wear-resistant grade The insert employs a PVD-coated cutting material of grade AH7020, a wear- and fracture-resistant cemented carbide developed for drilling. This combination reduces flank wear and maintains a sharp cutting edge over longer intervals, which leads to fewer tool changes and more predictable cycle times. The result is improved process security and a higher effective productivity when used in demanding production runs. Consistent hole quality and secure clamping A defined 0.4 mm corner radius and a relief angle of 11° support consistent hole geometry and controlled cutting forces, reducing the risk of burr formation and dimensional scatter. The insert features a cylindrical hole with a one-sided countersink, designed to guarantee positive seating and repeatable clamping in compatible drill bodies; this ensures mechanical stability during high-feed passes and when machining varied workpiece materials. Efficient chip control and machining stability The DJ chipbreaker is tuned for reliable chip segmentation and evacuation during through-cut drilling, lowering the chance of chip jamming and improving surface quality. Integrated into the indexable full-bore system of the TungDrillTwisted family, the insert is intended for use with TDX drill bodies and benefits from a system approach — matching insert geometry, body overhang and coolant strategy to achieve stable cutting conditions with minimal setup effort. Practical integration and application support Insert dimensions such as 2.38 mm plate thickness and size 05 make the component easy to specify in existing tool lists; selection should consider diameter, L/D ratio, shank interface and coolant arrangement to match machine and workpiece. Application advice and cutting data are available to support implementation and process optimisation. Application advice is available from Metav Werkzeuge to assist with tool selection and parameter tuning. Contact Metav Werkzeuge for tailored selection and application support of Tungaloy XPMT050204R-DJ AH7020 inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6952948 Manufacturer SKU: TUN6952948 SKU: 6952948-Tungaloy Model series: TungDrillTwisted Insert designation: XPMT050204R-DJ AH7020 Application: Drilling Facts Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 2.38 mm Size: 05 Manufacturer article number: 6952948 Special features PVD-coated cemented carbide (AH7020) DJ chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Special plate shape Indexable full-bore system for TDX / C-TDX drill bodies System components: TDX/C-TDX bodies, XPMT inserts, clamping screws and keys FAQ What materials is this insert suitable for? The XPMT050204R-DJ AH7020 insert is specified for general drilling tasks; grade AH7020 is wear- and fracture-resistant and provides a wide material coverage when matched with appropriate cutting data. How does the DJ chipbreaker affect machining performance? The DJ chipbreaker enhances chip segmentation and evacuation, promoting stable cutting forces and reduced risk of chip-related interruptions when using the indexable full-bore system. How is the insert clamped in the drill body? Clamping is achieved via the insert’s cylindrical hole with a one-sided countersink, which ensures secure seating and repeatable positioning in compatible TDX drill bodies. Which dimensions should be checked before ordering? Check corner radius (0.4 mm), plate thickness (2.38 mm), size (05) and relief angle (11°); reference the manufacturer article number 6952948 or SKU TUN6952948 when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH7030 Wendeplatten - Tungaloy
Take advantage of the proven combination of a PVD-coated AH7030 grade and a sharp cutting edge for reliable drilling performance; the insert supports stable chip formation and process security in demanding production runs. Order directly via Metav Werkzeuge or consult our advisers for selection and availability. XPMT 050204 AH7030 indexable insert for drilling — Tungaloy XPMT050204R-DJ AH7030 is an indexable insert developed for the TungDrillTwisted solid-drilling system, optimised for general drilling with TDX drill bodies and varying L/D ratios PVD-coated AH7030 carbide for wear resistance Sharp cutting edge for secure process performance Designed for TungDrillTwisted TDX drill bodies Consistent process security through material and coating The combination of a PVD-coated surface and a wear-resistant AH7030 grade provides predictable tool life and repeatable results in drilling operations. The coating improves abrasion resistance while the cemented carbide substrate maintains mechanical strength at elevated temperatures, which helps to reduce unexpected insert failures. This technical pairing leads to fewer tool changes and a more stable production cycle, especially when process reliability is a priority. Geometry that improves chip control and edge stability Aimed at general drilling, the insert features a sharp cutting edge and an integrated chipbreaker design DJ that together support controlled chip evacuation and reduced cutting forces. The specified corner radius 0.4 mm balances edge strength and entry behaviour, decreasing the tendency for chipping while maintaining a clean hole entry. These geometric choices make the insert suitable for varying overhangs and L/D ratios within the TungDrillTwisted family. System compatibility and flexible application Engineered for use with TDX drill bodies from the TungDrillTwisted series, the insert matches the system’s clamping and interface options and is supplied with the common cylindrical hole plus a single-side countersink (40°–60°). This ensures straightforward mechanical integration and interchangeability across compatible drill bodies, simplifying tooling logistics on the shop floor and supporting quick reconditioning routines. Operational benefits for workshop efficiency Choosing this insert supports efficient cycle times through sustained cutting performance and stable span formation. The PVD coating and substrate combination reduce wear rates under typical drilling conditions, while the special plate form and a plate thickness of 2.38 mm contribute to secure clamping and repeatable positioning. These factors together enhance productivity and lower the risk of process interruptions in serial production environments. For precise application advice and availability of Tungaloy XPMT inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine compatibility and recommended L/D selections Technical data Article number: 7755715-Tungaloy Manufacturer SKU: TUN7755715 Manufacturer item no.: 7755715 Label: XPMT050204R-DJ AH7030 Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 11° Plate size: 05 Special features Grade/coating: PVD-coated AH7030 Material: cemented carbide Chipbreaker: DJ Hole: cylindrical hole with single-side countersink 40°–60° Plate shape: special System: TungDrillTwisted with TDX drill bodies Application: drilling FAQ What materials is this insert suited for? The XPMT050204R-DJ AH7030 insert is designed as a wear- and chipping-resistant grade suitable for general drilling tasks; refer to machining trials for specific material ranges and cutting parameters. How does the AH7030 grade benefit drilling operations? AH7030’s PVD-coating and carbide substrate provide enhanced abrasion resistance and edge stability, which improves process security and tool life in repetitive drilling cycles. Can the insert be used with different L/D ratios? Yes — the TungDrillTwisted family is differentiated by overhang and L/D ratio; the insert is compatible with the TDX drill bodies within that system but requires selection of the correct drill body for the intended L/D. What is the hole and countersink specification of the insert? The insert features a cylindrical hole with a single-side countersink specified between 40° and 60°, enabling standard clamping and positioning in the TDX drill bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH7030 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH7030 carbide grade, modular TDX exchangeable-insert system and optimised chip control for reliable drilling performance; order directly via Metav Werkzeuge or consult our specialists for application support. XPMT 050204 AH7030 exchangeable-insert drill — Tungaloy The XPMT 050204R-DS AH7030 is an exchangeable-insert drilling solution designed for general drilling with TDX-series drill bodies, offering wear resistance and process stability. Modular TDX exchangeable-insert system PVD-coated AH7030 carbide for wear resistance DS chipbreaker for improved chip control Cylindrical hole with single-sided countersink Greater process reliability through robust insert chemistry The combination of a PVD-coated cutting material and the specialised AH7030 grade delivers a balance of wear resistance and edge strength that supports consistent drilling cycles. The coated carbide composition reduces flank wear during extended runs, which leads to fewer interruptions for insert changes and more predictable tool life. This stability proves advantageous where process security and repeated hole quality are priorities, reducing scrap rates and enhancing throughput without complex intervention. Cleaner chips and fewer interruptions with optimised geometry The insert geometry, featuring a DS chipbreaker and a 0.4 mm corner radius, is tailored for controlled chip formation and evacuation. The cylindrical hole with a single-sided countersink (40°–60°) improves coolant flow and reduces the chance of chip packing in the flute, which in turn lowers the risk of insert breakage and unstable drilling. As a result, cycle times remain steady and surface quality is preserved, delivering a measurable improvement to production continuity and operator confidence. Flexible system design that matches machines and materials As part of the TungDrillTwisted family, this insert fits TDX/C‑TDX drill bodies and is available across differing overhang lengths and L/D ratios, so the drilling arrangement can be matched to machine capability and part geometry. Selecting the right diameter, shank and insert variant keeps tooling inventories efficient while enabling rapid adaptation to new components or materials. The modular approach supports quick changeovers and reduces set-up complexity on the shop floor. Practical advantages from precise insert specifications Key dimensional qualities such as the 2.38 mm plate thickness, the 11° clearance angle and the ISO designation 050204 give clear parameters for process planning and CAM setup. The XPMT050204R‑DS insert format facilitates consistent seating and repeatability across operations, while the edge geometry is engineered for applications that demand a sharp cutting edge combined with high process reliability. This makes the insert well suited where repeatable hole tolerances and surface finishes are required. For process-critical drilling choose the Tungaloy XPMT insert in AH7030 — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine compatibility and optimal setup. Technical data Article number: 7755716 SKU: 7755716-Tungaloy Model series: TungDrillTwisted Insert designation: XPMT050204R-DS AH7030 Facts ISO code: 050204 Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 05 Countersink: 40°–60° Special features PVD-coated carbide grade AH7030 DS chipbreaker Cylindrical hole with single-sided countersink TDX-compatible exchangeable-insert system Application: drilling FAQ What is the primary benefit of the AH7030 grade for drilling? The AH7030 grade in the XPMT insert offers a PVD-coated carbide composition that balances wear resistance and edge strength, providing reliable cutting performance and extended insert life for drilling operations. Can the insert be used with different overhangs and L/D ratios? Yes, the TungDrillTwisted family and TDX/C‑TDX bodies allow selection by overhang and L/D ratio, so the insert can be configured to match machine and component requirements. How does the DS chipbreaker improve machining? The DS chipbreaker on the XPMT insert promotes controlled chip formation and evacuation, reducing the likelihood of chip packing and improving stability during continuous drilling. Is the XPMT050204R‑DS suitable for precision hole quality? The insert’s geometry, including the 0.4 mm corner radius and 11° clearance, supports repeatable seating and consistent cutting, contributing to improved hole quality and surface finish. What mounting components are required with the insert? The system is supplied as part of a TDX exchangeable-insert drilling system and requires compatible TDX or C‑TDX drill bodies, plus the specified clamping screws and keys for secure assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH7030 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH7030 carbide for a sharp, wear-resistant cutting edge and the modular TDX drill body system for simplified tool assembly and predictable results. Order the insert and compatible TDX bodies directly via Metav Werkzeuge or ask their specialists for support on L/D selection and cutting parameters. XPMT 050204 AH7030 indexable-insert drill plate for drilling – Tungaloy, PVD-coated carbide A XPMT 050204 AH7030 indexable-insert drilling plate designed for general-purpose drilling with a secure DW chipbreaker and a cylindrical hole with single-side countersink for reliable clamping PVD-coated carbide grade AH7030 DW chipbreaker for secure chip control 0.4 mm corner radius for consistent finish Cylindrical hole with 40°–60° countersink Consistent cutting performance for stable production The XPMT insert is manufactured in the AH7030 grade and PVD-coated to combine abrasion resistance with a consistently sharp cutting edge. In practice this means the indexable-insert drilling system maintains process stability over longer tool lives, reducing unplanned tool changes and interruptions. The modular design of the system, with dedicated TDX drill bodies, enables a clear separation between the cutting edge and the body, which simplifies maintenance and keeps machine downtime to a minimum. The result is measurable productivity gains when drilling a broad range of materials. System reliability and quick tool handling The insert geometry and clamping concept are designed for quick and repeatable assembly. The plate comes with a DW chipbreaker and a cylindrical hole with a 40°–60° single-side countersink, which together ensure secure seating and positive torque transfer under moderate cutting loads. The indexable format and standardised interface enable rapid swaps and tool reconditioning; this reduces setup time and supports lean machining workflows. For workshops seeking predictable cycle times, the combination of modular bodies and standardised plates simplifies inventory management. Geometry and material adaptability for defined surface quality The plate offers a 0.4 mm corner radius and a plate thickness of 2.38 mm, which together support a balance between dimensional control and surface finish during drilling. The special plate form and chip control features minimise burr formation and stabilise chip evacuation, especially when paired with suitable coolant and feed settings. Where a sharp edge and process security are required for general drilling, the carbide composition and PVD surface ensure wear resistance while maintaining cutting performance, making the family suitable for mixed-material production environments. For tailored advice on selecting matching TDX bodies, L/D ratios and cutting data for the Tungaloy XPMT 050204 AH7030, please contact Metav Werkzeuge – info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6970294 SKU: 6970294-Tungaloy Manufacturer SKU: TUN6970294 Facts Insert designation: XPMT050204R-DW ISO code: 050204 Plate size: 05 Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 11° Special features Grade/coating: AH7030, PVD-coated carbide Chipbreaker: DW Hole: cylindrical hole with single-side countersink (40°–60°) Plate form: special System: TungDrillTwisted model series with TDX/C-TDX drill bodies Scope: indexable-insert full drilling system; includes inserts, clamping screws and key as system components FAQ What materials is the insert suitable for? The XPMT 050204 AH7030 insert is a wear-resistant PVD-coated carbide grade suited for general drilling tasks; material compatibility depends on cutting data and coolant selection. How does the DW chipbreaker influence chip control? The DW chipbreaker is designed to form stable chips and support reliable evacuation, which helps to reduce heat buildup and tool wear during drilling cycles. What does the ISO code 050204 indicate? The ISO code 050204 denotes the insert geometry and size family; it helps to select compatible toolholders and to match the plate to the appropriate TDX drill body. Can the insert be used with different TDX bodies? Yes, the insert is part of a modular system (TungDrillTwisted) and fits the specified TDX/C‑TDX drill bodies, enabling selection based on L/D requirements and machine interface. Which features support a secure clamping of the plate? Secure clamping is achieved by the cylindrical hole with single-side countersink (40°–60°) and standardised fixing screws, which together ensure repeatable seating and torque transmission. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH725 Wendeplatten - Tungaloy
Benefit from a versatile indexable drilling system that combines economic efficiency, high process security and straightforward maintenance: the exchangeable XPMT inserts and the AH725 PVD-coated carbide grade ensure consistent hole quality across steel and stainless steel, while the TDX drill bodies allow rapid insert replacement. Order directly via Metav Werkzeuge or consult our specialists for tailored tooling layouts. XPMT 050204 AH725 XPMT – Drilling solution by Tungaloy The XPMT050204R-DJ AH725 XPMT is an indexable‑insert full‑hole drilling system designed for general drilling, featuring TDX drill bodies and the universal, breakout‑resistant AH725 insert grade. TDX drill body with exchangeable XPMT inserts AH725 PVD-coated carbide for steel and stainless steel Cylindrical hole with single-sided countersink Consistent production through a flexible insert system The TungDrillTwisted family delivers a modular approach to conventional drilling: TDX and C‑TDX drill bodies accept the exchangeable inserts specified for diameter, L/D ratio and machine interface, enabling rapid adaptation to varying jobs. Using the XPMT insert geometry together with a TDX holder reduces tool change time and simplifies inventory management compared with solid drills. The AH725 grade, a PVD‑coated carbide, has been developed for universal use and reliable chip formation, which supports stable cutting conditions when processing both unalloyed steel and stainless steel. For production planners this means predictable performance across mixed lots and fewer emergency stoppages due to insert failure. Reliable hole quality and improved chip control Designed with a DJ chipbreaker and a corner radius of 0.4 mm, this insert form maintains consistent chip evacuation and prevents edge chipping in medium‑to‑high cutting forces. The insert’s cylindrical fastening hole with a single‑sided countersink (40°–60°) secures positioning and repeatability, translating into improved surface finish and dimensional consistency. The 11° clearance angle and 2.38 mm plate thickness contribute to stable cutting engagement and resistance to vibration, which in turn reduces rework and scrap rates. For users unfamiliar with this terminology: the chipbreaker shapes the chips so they break into short segments, keeping flutes clear and helping coolant access the cutting zone. Lower running costs through fast maintenance and process security Replacing an insert is markedly quicker than regrinding or fitting new solid drills, and the TDX system uses standard clamping screws and keys for straightforward servicing. The carbide composition and PVD coating together extend useful life, especially in smaller diameters and in applications where frequent material changes demand robust performance. The family’s classification by overhang (L/D) and interface facilitates selection for deep or short borings while maintaining process security. For operations seeking to raise throughput without extensive capital outlay, this system offers a pragmatic balance of productivity and predictable tool life. Contact Metav Werkzeuge for personalised tool selection and delivery of Tungaloy TungDrillTwisted systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6861402 SKU: 6861402-Tungaloy Manufacturer SKU: TUN6861402 Material: Hartmetall Model series: TungDrillTwisted Insert designation: XPMT050204R-DJ Insert name: XPMT050204R-DJ AH725 Application: Bohren Core specifications Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 05 Countersink angle: 40°–60° Special features Coating: PVD Grade: AH725 (universal, breakout‑resistant) Chipbreaker: DJ Plate form: Special Hole style: with hole — cylindrical hole + single‑sided countersink System components: TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and key FAQ What materials are recommended for this insert and grade? The XPMT050204R-DJ AH725 insert is specified for steel and stainless steel and is suitable where mixed‑material batches require a universal, breakout‑resistant performance. How does the AH725 grade improve process security? AH725 is a PVD‑coated carbide grade designed for stable chip formation and reduced edge breakout; when combined with the XPMT geometry it delivers repeatable cutting behaviour and predictable tool life. Can the insert handle deep hole drilling with longer overhangs? The TungDrillTwisted family is differentiated by overhang (L/D) and interface; selecting the appropriate TDX body and L/D variant ensures the XPMT insert performs reliably in deeper bores. What role does the DJ chipbreaker play in machining? The DJ chipbreaker forces chips to fracture into short segments, improving evacuation and reducing flute clogging, which enhances surface quality and reduces machining interruptions. Is the insert easy to replace during shift work? Yes; the system uses clamping screws and a simple key for fast insert changes, minimising downtime compared with regrinding or replacing solid tools. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH725 Wendeplatten - Tungaloy
XPMT 050204 AH725 Wendeschneidplatte zum Bohren — Tungaloy Die Wendeschneidplatte XPMT 050204 AH725 ist eine PVD-beschichtete Hartmetallplatte für universelles Bohren in Stahl und rostfreiem Stahl und überzeugt durch hohe Prozesssicherheit und ausbruchfeste Schneidkanten PVD-beschichtetes Hartmetall AH725 Ausbruchfeste Sorte für Stahl und rostfreie Stähle Zylindrisches Loch mit einseitiger Senkung 40°–60° Eckenradius 0,4 mm und Freiwinkel 11° Spanformer DS für stabile Spanbildung Höhere Prozesssicherheit durch moderne Schneidstoffauslegung Die AH725-Sorte kombiniert eine PVD-Beschichtung mit einem verschleißfesten Hartmetallträger und bietet dadurch stabile Schneidkanten bei wechselnden Werkstoffen. Anwender profitieren von gleichbleibenden Ergebnissen beim Bohren von Stahl und rostfreiem Stahl sowie von einer reduzierten Ausbruchsneigung bei kleineren Werkzeugdurchmessern. Die Beschichtung erhöht die Standzeit und ermöglicht konstante Schnittbedingungen, was insbesondere bei Serienfertigung und variierenden Materialchargen zu planbaren Werkzeugzyklen führt Mechanik und Lochbild sorgen für sicheren Sitz und Kühlmittelführung Das zylindrische Loch mit einseitiger Senkung (40°–60°) verbessert die Spannbarkeit der XPMT-Platte im TDX-Bohrkörper und unterstützt eine zuverlässige Kraftübertragung. Der Eckenradius von 0,4 mm und der Freiwinkel von 11° sind auf universelle Bohranwendungen abgestimmt und ermöglichen vorhersehbare Spanformen. Die Plattendicke von 2,38 mm trägt zur Stabilität bei und vermindert Vibrationen, wodurch die Oberflächengüte im Werkstück positiv beeinflusst wird Flexible Systemintegration im TungDrillTwisted Wechselplatten-Vollbohrsystem Die Wendeplatten-Familie der Modellserie TungDrillTwisted ist als Wechselplatten-Vollbohrsystem konzipiert; der Systemaufbau umfasst TDX/C‑TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel. Diese modulare Struktur erlaubt die Auswahl von Durchmesser, L/D-Verhältnis und Schnittstelle passend zur Maschine, zum Werkstoff und zur Kühlung. Für Betriebe bedeutet das: schnelle Werkzeugintegration, weniger Stillstandzeiten und einfache Anpassung an vielfältige Bearbeitungsaufgaben Zielgruppe und Praxisempfehlung für zuverlässige Bearbeitung Die XPMT 050204 AH725 richtet sich an Zerspaner in Betrieben, die universelle Bohrlösungen für Stahl und rostfreien Stahl benötigen und bei denen Prozesssicherheit Vorrang hat. Insbesondere Fertigungsbetriebe mit wechselnden Werkstoffen oder kleine bis mittlere Bohrdurchmesser profitieren von der ausbruchfesten Sorte und dem stabilen Lochbild. Bei Unsicherheit zur passenden Kombination von Bohrkörper und Plattentyp steht die technische Beratung zur Verfügung, um optimale Schnittwerte und Kühlkonzepte zu ermitteln Setzen Sie auf die Wendeschneidplatte XPMT 050204 AH725 von Tungaloy für sichere, vielseitige Bohrprozesse; bei Bedarf fachliche Beratung und Bestellhilfe per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6861360 Marke: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT050204R-DS Fakten Eckenradius: 0,4 mm Plattendicke: 2,38 mm Freiwinkel: 11° Plattengröße: 05 Besonderheiten Material: Hartmetall Beschichtung: AH725 (PVD-beschichtet) Spanbrecher: DS Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Systemaufbau: TDX/C‑TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben, Schlüssel Einsatz: Bohren FAQ Für welche Werkstoffe ist die Platte geeignet? Die Wendeschneidplatte XPMT 050204 AH725 von Tungaloy ist für Stahl und rostfreie Stähle ausgelegt und eignet sich besonders, wenn wechselnde Werkstoffe und hohe Forderungen an Prozesssicherheit vorliegen. Was bedeutet die Bezeichnung DS beim Spanbrecher? DS bezeichnet den speziell geformten Spanbrecher, der eine stabile Spanbildung erlaubt und somit Ausbrüche an der Schneide reduziert; das verbessert die Zerspanungsstabilität bei der XPMT-Platte. Wie unterstützt die PVD-Beschichtung die Standzeit? Die PVD-beschichtung der Sorte AH725 reduziert Verschleiß an der Schneidkante und sorgt für konstante Gleiteigenschaften, was zu längeren Werkzeugstandzeiten bei Bohranwendungen führt. Passt die Platte in alle TungDrillTwisted TDX-Bohrkörper? Die XPMT-Platten sind für den Einsatz im TungDrillTwisted Wechselplatten-Vollbohrsystem mit TDX/C‑TDX-Bohrkörpern vorgesehen; bei spezifischen Schnittstellen empfiehlt sich die Abstimmung von Bohrkörper, Durchmesser und L/D-Verhältnis. Welchen Einfluss hat der Eckenradius auf die Bearbeitung? Der Eckenradius 0,4 mm reduziert die Kerbwirkung an der Schneide und unterstützt eine kontrollierte Spanabnahme, was besonders bei dünnwandigen oder empfindlichen Werkstücken von Vorteil ist. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 050204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide, precise 0.4 mm corner radius, and the modular TungDrillTwisted system for reliable, repeatable drilling results; order or request application support via Metav Werkzeuge for seamless integration into production. XPMT 050204 AH725 indexable insert for drilling — Tungaloy XPMT050204R-DW AH725 is a PVD-coated carbide indexable insert designed for general drilling in steel and stainless steels using TDX drill bodies AH725 PVD-coated carbide grade Breakout-resistant, wide material range Compatible with TDX drill bodies Cylindrical hole with single countersink Consistent tool life through a universal, robust grade The AH725 grade is a PVD-coated carbide developed for process security across a broad spectrum of workpiece materials, notably steel and stainless steels. Its formulation and coating work together to provide stable chip formation and improved wear resistance, which reduces unexpected tool changes and machine downtime. For operations that face varying materials or batch-to-batch variability, this combination supports predictable tool life and consistent output quality without complex parameter adjustments. Modular system design reduces inventory and changeover time Designed for the TungDrillTwisted family, the insert fits TDX drill bodies to form a modular full-bore system. The series is differentiated by overhang and L/D ratio as well as the interface, enabling selection of diameter, L/D and shank to match machine capability and application. This modularity simplifies tooling stock, shortens set-up routines and allows quick replacement of worn inserts, delivering tangible savings in cycle time and logistics for production environments. Geometry engineered for precision and stable cutting The insert geometry — including a 0.4 mm corner radius, 11° relief, and a plate thickness of 2.38 mm — is optimised for stable cutting and reproducible hole quality, especially with smaller tools and demanding process requirements. The DW chipbreaker promotes controlled chips, while the cylindrical hole with single countersink (40°–60°) secures mounting and alignment on the drill body. These design elements contribute to improved tolerance adherence and surface finish when performing general drilling operations. Practical application guidance for integration Selection of the correct insert size, ISO 050204, and matching to machine capability, coolant strategy and workpiece material is key. Where high process security is required, the universal, breakout-resistant nature of this insert makes it suitable for mixed-production environments and short batch runs. Operators benefit from clear mechanical interfaces and repeatable clamping, which minimise set-up variance and support sustained productivity in series and jobbing shops. For reliable drilling performance with Tungaloy AH725 inserts, contact Metav Werkzeuge for tailored application advice or to procure the TUN6861456 article directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6861456 Manufacturer SKU: TUN6861456 SKU: 6861456-Tungaloy Insert designation: XPMT050204R-DW AH725 Facts Corner radius: 0.4 mm Thickness: 2.38 mm Relief angle: 11° Size: 05 ISO designation: 050204 Special features Coating: AH725 (PVD-coated carbide) Chipbreaker: DW Hole style: cylindrical hole with single countersink (40°–60°) Plate form: special System: TungDrillTwisted with TDX drill bodies Application: drilling Material suitability: steel and stainless steels FAQ What materials is this insert suitable for? The XPMT050204R-DW AH725 insert from Tungaloy is optimised for steel and stainless steels, offering wide material coverage and stable chip formation under varying production conditions. How does the AH725 coating improve performance? The PVD-coated AH725 layer increases wear resistance and reduces built-up edge tendencies, resulting in longer, more predictable insert life and improved hole quality when used in the TungDrillTwisted system. What does the chipbreaker DW provide in drilling? The DW chipbreaker delivers controlled chip evacuation and reduced vibration, which supports consistent hole tolerances and safer chip handling during general drilling operations. Is this insert compatible with standard TDX bodies? Yes — the insert is intended for use in TDX drill bodies as part of the TungDrillTwisted family; correct pairing of insert size and drill interface is essential for optimal performance. How does the 0.4 mm corner radius affect hole quality? The 0.4 mm corner radius balances cutting-edge strength and sharpness, helping to maintain surface finish and dimensional accuracy while keeping cutting forces within acceptable limits for smaller tools. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050204 AH9030 Wendeplatten - Tungaloy
XPMT 050204 AH9030 Wendeplatte für Bohren — Tungaloy Die XPMT 050204 AH9030 ist eine PVD-beschichtete Wendeplatte aus Hartmetall, entwickelt für prozesssichere Bohrungen im Wechselplatten-Vollbohrsystem mit TDX-Bohrkörpern. XPMT050204 Wendeplatte von Tungaloy PVD-beschichtetes Hartmetall AH9030 für lange Standzeit Einseitiger Spanbrecher für stabile Spanbildung Mit zylindrischem Loch und einseitiger Senkung 40°–60° Langlebigkeit durch Material und Beschichtung Die Wendeplatte überzeugt durch Hartmetall in Kombination mit der AH9030 PVD-Beschichtung, wodurch die Schneidkante verschleiß- und ausbruchfest bleibt. Diese Materialwahl reduziert Stillstandszeiten, weil Nacharbeit und Werkzeugwechsel seltener erforderlich sind. Für Anwender bedeutet das weniger Rüstaufwand und konstantere Fertigungszyklen bei Serienbohrungen. Prozesssicherheit und stabile Spanbildung beim Bohren Der einseitige Spanbrecher sorgt für kontrollierte Spanbildung und trägt damit zur Prozessstabilität bei. In Verbindung mit einer scharfen Schneidkante resultiert das in reproduzierbaren Ergebnissen und verbesserter Oberflächengüte. Dies ist besonders vorteilhaft, wenn enge Toleranzen und gleichbleibende Maßhaltigkeit verlangt werden. Systemkompatibilität und einfache Handhabung Die Platte ist für das Wechselplatten-Vollbohrsystem mit TDX-Bohrkörpern ausgelegt und besitzt ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was eine sichere Befestigung mittels Spannschrauben gewährleistet. Der modulare Aufbau erleichtert die Auswahl passender Schäfte und Bohrkörper, sodass Umrüstzeiten minimiert und Maschinenauslastung optimiert werden. Empfohlene Einsatzbereiche und Anwendernutzen Die Ausführung richtet sich an Fertigungsbetriebe und Werkstätten, die allgemeines Bohren und Serienfertigung mit Fokus auf Wiederholgenauigkeit betreiben. Die Platte ist geeignet, wenn sowohl eine scharfe Schneidkante als auch hohe Prozesssicherheit gefordert werden, und unterstützt die effiziente Bearbeitung unterschiedlicher Werkstoffe bei angepasster Kühlung und Schnittdaten Empfehlung: Die XPMT 050204 AH9030 Wendeplatte von Tungaloy bietet hohe Prozesssicherheit bei Bohraufgaben und kann direkt über Metav Werkzeuge angefragt werden — für technische Rückfragen: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6718250 Marke: Tungaloy Modellserie: TungDrillTwisted Hersteller SKU: TUN6718250 Daten Eckenradius: 0,4 Plattendicke: 2,38 mm Freiwinkel: 11° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte/Beschichtung: AH9030 Plattengröße: 05 Plattenform: Sonder Lochausführung: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Bohren FAQ Welche Anwendung deckt die XPMT 050204 AH9030 Wendeplatte ab? Die XPMT 050204 AH9030 Wendeplatte von Tungaloy ist für allgemeines Bohren im Wechselplatten-Vollbohrsystem konzipiert und eignet sich besonders für Fertigungsprozesse mit Anforderungen an Prozesssicherheit und Schnittstabilität. Für welche Werkstoffe ist die Platte geeignet? Die PVD-beschichtete Hartmetallplatte AH9030 ist verschleiß- und ausbruchfest ausgelegt und unterstützt die Bearbeitung unterschiedlicher Werkstoffe, sofern Schnittdaten und Kühlung entsprechend angepasst werden. Wie wird die Wendeplatte befestigt und montiert? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°) und wird in TDX-Bohrkörpern mittels Spannschrauben fixiert; dies gewährleistet eine zuverlässige Verbindung und einfache Handhabung. Welche Vorteile bietet der einseitige Spanbrecher? Der einseitige Spanbrecher der XPMT 050204 sorgt für kontrollierte Spanbildung, reduziert Störungen im Prozess und trägt zu gleichbleibender Oberflächengüte sowie verbesserten Fertigungsergebnissen bei. Welches Zubehör gehört zum Systemaufbau? Zum Systemaufbau zählen TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und der passende Schlüssel; die Kombination ermöglicht flexible Anpassung an Maschine und Werkstück. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 050204 AH9030 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH9030 carbide, proven chip control and the modular TDX drill-body concept for reliable, repeatable drilling performance; order original inserts through Metav Werkzeuge or consult our specialists for selection and process tuning. XPMT 050204 AH9030 – XPMT050204R-DW insert for full drilling system (general drilling) by Tungaloy A XPMT050204R-DW AH9030 indexable carbide insert designed for TungDrillTwisted full drilling systems, optimised for general-purpose drilling where a sharp cutting edge and process security are required PVD-coated carbide grade AH9030 for process security Designed for TungDrillTwisted TDX drill bodies 0.4 mm corner radius and 11° relief angle Cylindrical hole with one-sided countersink Stable cutting performance for repeatable results The insert combines a PVD-coated wear-resistant carbide matrix with a chipbreaker geometry designed to reduce edge chipping and stabilise the machining process. The grade AH9030 delivers both abrasion resistance and resistance to breakage, which translates into consistent tool life and fewer unexpected tool changes. For production environments this means higher machine availability and a predictable quality output; the modular insert concept enables rapid replacement and avoids full-tool discard, improving overall efficiency. System compatibility and practical advantages Installed in the TungDrillTwisted family of TDX/C‑TDX drill bodies, the cutting plate features a 0.4 mm corner radius and an 11° relief angle, with a plate thickness of 2.38 mm and the DW chipbreaker for controlled chip formation. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to suit secure clamping and repeatable seating. The modular system includes clamping screws and a key, permitting straightforward assembly. Choosing the correct diameter, L/D ratio and shank in line with machine capacity and coolant strategy helps to exploit the insert’s advantages fully. Productivity gains and application guidance As a replaceable insert in a full drilling system, this component reduces tooling costs per hole and shortens maintenance routines compared with solid drills. The insert is recommended when a sharp cutting edge and process security are priorities; it is suitable for general drilling tasks where stable chip control and predictable wear behaviour are important. When selecting tooling, match the insert geometry to the workpiece, machine rigidity and coolant availability to achieve higher feed rates and repeatable surface finish, thereby improving throughput without sacrificing reliability. For application advice or to order original Tungaloy inserts, contact Metav Werkzeuge for tailored recommendations and fast delivery; our consultants are available to check compatibility and help configure the right TungDrillTwisted setup for the intended machining task. Technical Data Article number: 6718264 SKU: 6718264-Tungaloy Manufacturer SKU: TUN6718264 Model series: TungDrillTwisted Designation: XPMT050204R-DW AH9030 Material: Hartmetall Core specifications Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 05 Plate form: Special Hole: with hole Hole style: cylindrical hole with one-sided countersink (40°–60°) Materials & special features Coating / grade: AH9030 (PVD-coated) Chipbreaker: DW System components: TDX/C‑TDX drill bodies, XPMT inserts, clamping screws, key Typical use: general drilling; family differentiated by overhang (L/D) and interface FAQ What machining tasks is this insert suited for? The XPMT050204R-DW AH9030 insert is intended for general drilling within the TungDrillTwisted full drilling system, particularly where a sharp cutting edge and secure process behaviour are required. What does the AH9030 grade provide? The AH9030 PVD-coated carbide grade offers wear resistance and fracture toughness, delivering reliable edge stability and consistent tool life for repeatable drilling operations. How is the insert mounted in the drill body? The insert seats in TDX/C‑TDX drill bodies and is secured with the supplied clamping screw; the cylindrical hole with a one-sided countersink ensures correct seating and orientation. Which geometry details affect cutting behaviour? The 0.4 mm corner radius and 11° relief angle influence edge strength and cutting engagement; these features, together with the DW chipbreaker, promote controlled chip formation and process stability. What is included in the drilling system family? The TungDrillTwisted family comprises TDX/C‑TDX bodies, XPMT insert types, clamping screws and the assembly key, enabling modular configuration to match machine, coolant and workpiece conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 050308 T313W Wendeplatten - Tungaloy
High wear resistance from the T313W grade, a secure clamping geometry and the precise 0.8 mm corner radius combine to deliver stable cutting and consistent edge life; order the XPMT050308 insert directly via Metav Werkzeuge or contact our consultants for application recommendations. XPMT050308 T313W indexable insert for turning — Tungaloy XPMT050308 T313W is a replaceable indexable insert designed for turning applications, offering a balanced combination of wear resistance and toughness for demanding metalcutting tasks. One-sided chipbreaker for controlled chips 0.8 mm corner radius for robust edges Cylindrical hole with 40°–60° countersink Carbide grade optimised for turning Consistent chip control for predictable machining The one-sided chipbreaker delivers dependable chip formation under varying cutting conditions, helping to avoid tangles and maintain coolant flow. Controlled chips reduce cycle variations and support unattended operation, which improves overall machine utilisation. For shops moving from conventional inserts, the optimised chip geometry shortens cycle stabilisation time and contributes to a more consistent surface finish. System compatibility that speeds set-up and changeover Designed for use within the TungDrillTwisted family and compatible with TDX bodies, the insert’s cylindrical hole and single-sided countersink ensure secure location and repeatable seating. This mechanical stability reduces indexing errors and minimises rework after insert changes. Where process speeds and tool-change cadence matter, this compatibility lowers downtime and increases throughput across batch production. Grade selection for longer edge life and toughness The T313W Tungaloy grade is formulated to balance wear resistance and toughness, providing reliable performance when machining steels and mixed materials. The carbide substrate combined with the grade’s properties supports stable cutting-edge behaviour under interrupted cuts or harder workpiece zones. As a result, tool life is extended and frequency of insert replacement is reduced, improving cost-efficiency per component. Precision geometry for repeatable accuracy A corner radius of 0.8 mm and a plate thickness of 3.18 mm deliver a robust cutting edge while maintaining the small-scale geometry required for precise turning. The special plate form and defined seating geometry ensure consistent chip load and repeatable cutting behaviour during indexing. These features support tight tolerances and predictable dimensional outcomes on parts where reproducibility is essential. Contact Metav Werkzeuge today to source Tungaloy XPMT050308 inserts (SKU 6810014-Tungaloy) and request tailored recommendations from our technical specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6810014 SKU: 6810014-Tungaloy Manufacturer: Tungaloy Model series: TungDrillTwisted Grade: T313W Material: carbide Facts Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 3.18 mm Plate size: 05 Special features Cylindrical hole with one-sided countersink (40°–60°) Special plate form One-sided chipbreaker Intended application: turning Compatible with TDX bodies in the TungDrillTwisted family FAQ What materials is the insert suitable for? The XPMT050308 insert with the T313W grade is formulated for turning applications and offers a broad material coverage with a focus on steels and mixed materials due to its balance of wear resistance and toughness. How does the chipbreaker affect performance? The one-sided chipbreaker on this insert promotes stable chip formation, which enhances surface finish and reduces the risk of chip entanglement during automated turning operations with the XPMT050308. Is this insert compatible with modular drilling bodies? The TungDrillTwisted family description indicates compatibility with TDX bodies; the insert’s seating geometry (cylindrical hole and countersink) supports secure clamping in appropriately specified tool holders. What are the key dimensional features to check when replacing inserts? Confirm the corner radius (0.8 mm), plate thickness (3.18 mm) and plate size (05) to ensure correct seating and intended cutting geometry for the XPMT050308 insert. Which SKU or article number should be referenced when ordering? Reference SKU 6810014-Tungaloy or article number 6810014 when ordering the XPMT050308 T313W indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH6030 Wendeplatten - Tungaloy
XPMT 08T308 AH6030 Wendeplatte für Bohren von Tungaloy Der XPMT 08T308 AH6030 ist eine PVD-beschichtete Hartmetall-Wendeplatte für Wechselplatten-Vollbohrsysteme und wurde für wirtschaftliche, prozesssichere Bohrungen mit TDX-Bohrkörpern entwickelt. Hochverschleißfeste AH6030-Beschichtung Präziser Eckenradius 0.8 mm Einseitiger Spanbrecher für stabile Spanbildung Zylindrisches Loch mit einseitiger Senkung 40°–60° Überzeugende Prozesssicherheit durch robuste Schneidkante Die Wendeschneidplatte kombiniert PVD-beschichtetes Hartmetall mit der speziell entwickelten Sorte AH6030, die für verschleiß- und ausbruchfeste Performance sorgt. Diese Eigenschaft reduziert Standzeit und Ausfallrisiko in Serienprozessen, weil die Schneidkante länger scharf bleibt. Anwender profitieren von konstanter Bearbeitungsqualität und gleichbleibender Oberflächengüte bei wiederholten Bohrzyklen. Technischer Aufbau für zuverlässige Spanführung und Stabilität Die Auslegung als Teil des Wechselplatten-Vollbohrsystems mit TDX-Bohrkörpern und XPMT-Platten sorgt für klar definierte Schnittbedingungen. Der Eckenradius 0.8 mm und der einseitige Spanbrecher fördern eine kontrollierte Spanbildung; das zylindrische Loch mit Senkung verbessert die Spannlage der Platte. Ergebnis ist eine stabile Bearbeitung mit reduziertem Vibrationseinfluss und gleichmäßigem Spanabfluss. Praktische Einsatzempfehlungen und Kompatibilität Die Platte eignet sich für allgemeines Bohren; Auswahl von Durchmesser, L/D, Schaft und Einsatz muss an Maschine, Werkstoff und Kühlschmierstoff angepasst werden. Zur Einordnung: Der Begriff Eckenradius beschreibt die Rundung an der Plattenkante, die Einfluss auf Schneidkantenstabilität und Oberflächenbild hat. Für Anwendungen, bei denen scharfe Schneidkante und Prozesssicherheit gefordert sind, bietet die AH6030-Sorte eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit. Für Anwender in Produktion und Werkzeugbau Werkstätten und Fertigungsbetriebe, die produktive, wiederholgenaue Bohrprozesse benötigen, finden in dieser Wendeschneidplatte eine praxisnahe Lösung. Die TungDrillTwisted-Modellserie und die XPMT-Plattenfamilie ermöglichen eine flexible Anpassung an unterschiedliche Auskraglängen und Schnittstellen, was die Lagerhaltung vereinfacht und Rüstzeiten senkt. Bestellen Sie die XPMT 08T308 AH6030 direkt über Metav Werkzeuge oder kontaktieren Sie unsere Technische Beratung per E‑Mail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 für maßgeschneiderte Anwendungsempfehlungen Produktmerkmale Artikelnummer: 6718281 Marke: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT08T308 Fakten Eckenradius: 0.8 mm Freiwinkel: 11° Plattendicke: 3,97 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6030 (verschleiß- und ausbruchfest, scharfe Schneidkante) Plattenform: Sonder Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel Anwendung: Bohren Modellserie: TungDrillTwisted WPL: mit Loch ISO-Bezeichnung: 08T308 (ISO-Code für Plattentyp und Form) FAQ Wie unterscheidet sich die AH6030-Sorte von anderen Hartmetallsorten? Die AH6030-Sorte bietet bei der XPMT 08T308 AH6030 Wendeplatte von Tungaloy eine speziell abgestimmte Kombination aus Zähigkeit und Verschleißfestigkeit, sodass die Schneidkante länger scharf bleibt und die Prozesssicherheit beim Bohren erhöht wird. Für welche Bohranwendungen ist die XPMT08T308 besonders geeignet? Die XPMT08T308 ist für allgemeines Bohren mit Wechselplatten-Vollbohrsystemen ausgelegt; der Einsatz empfiehlt sich besonders dann, wenn scharfe Schneidkante und stabile Spanbildung gefordert sind. Welche Rolle spielt der Eckenradius 0.8 mm beim Einsatz? Der Eckenradius beeinflusst die Schneidkantenstabilität und das Oberflächenbild; ein Radius von 0.8 mm sorgt für einen guten Kompromiss zwischen Kantenschärfe und Belastbarkeit bei Serienbohrungen. Ist die Platte mit TDX-Bohrkörpern kompatibel? Ja, die Wendeschneidplatte ist als XPMT-Typ für den Einsatz in TDX-Bohrkörpern der TungDrillTwisted-Familie konzipiert und erlaubt eine einfache Montage sowie zuverlässige Spannlage durch das zylindrische Loch mit Senkung. Welche Informationen sollten für die Auswahl der passenden Platte bereitgestellt werden? Für optimale Auswahl von Durchmesser, L/D-Verhältnis, Schaft und Einsatz sollten Maschine, Werkstoffart, Kühlschmierstoff und gewünschte Oberflächengüte bekannt sein; geben Sie bei Anfragen gern die Artikelnummer 6718281 oder die SKU TUN6718281 an. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 08T308 AH6030 Wendeplatten - Tungaloy
Take advantage of a durable, process-safe solution that combines a PVD-coated carbide grade with a proven DJ chipbreaker for reliable, repeatable drilling. The insert’s precise geometry and compatibility with TDX drill bodies support steady productivity and simplified tool management — order directly via Metav Werkzeuge or consult the team for selection assistance. XPMT 08T308 AH6030 indexable insert for TDX full-bore drilling (Tungaloy) XPMT 08T308 AH6030 is an indexable insert intended for the TungDrillTwisted full-bore drilling system, designed to deliver process security and long tool life in general drilling applications PVD-coated AH6030 carbide DJ chipbreaker for process security 0.8 mm corner radius for smooth finish Compatible with TDX drill bodies Performance that keeps production moving The indexable full-bore system construction offers a cost-effective route to high-volume drilling: by combining exchangeable XPMT inserts with TDX/C-TDX drill bodies, tool changeover is rapid and on-machine downtime is reduced. The PVD-coated carbide grade provides a balance between wear resistance and toughness, enabling consistent cycle times. For production planning, the design translates into fewer tool replacements and more predictable spindle utilisation, which supports tighter scheduling and lower unit costs. Coating and grade engineered for stability The AH6030 grade is a PVD-coated carbide optimised for wear and chipping resistance when a sharp cutting edge and secure process behaviour are required. PVD (physical vapour deposition) forms a thin, hard film that reduces friction at the cutting edge and improves thermal stability under elevated cutting speeds. As a result, operators can maintain surface quality and dimensional stability in a wider range of steels and common workshop materials while benefitting from extended edge life compared with uncoated grades. Geometry that improves hole quality and chip control The insert geometry — 0.8 mm corner radius and 11° relief angle with a 3.97 mm plate thickness — is tuned to deliver a consistent finish and reduce the risk of edge failure. The DJ chipbreaker promotes predictable chip formation and evacuation, especially when paired with the TDX drill body’s coolant and flute geometry. The insert’s cylindrical hole with single-side countersink (40°–60°) ensures secure clamping and repeatable seating, which contributes directly to hole accuracy and repeatability in serial production. Practical application and service guidance Integration of these inserts into a TungDrillTwisted system supports flexibility: select insert size, L/D and shank style to match machine capability, workpiece material and coolant strategy. For complex setups or materials at the limit of the insert’s range, Metav Werkzeuge offers technical advice to ensure the correct combination of insert, drill body and process parameters. Trust in the component’s engineered features to reduce rejects and improve overall machining reliability while keeping setup straightforward. For high-process security in full-bore drilling, specify the Tungaloy XPMT 08T308 AH6030 insert and contact Metav Werkzeuge for tailored selection support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6718260 SKU: 6718260-Tungaloy Insert designation: XPMT08T308R-DJ Grade/coating: AH6030 (PVD) Material: Carbide Core specifications Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 3.97 mm Plate size: 08 Hole style: cylindrical hole + single-side countersink 40°–60° System & features Compatible system: TungDrillTwisted with TDX/C-TDX drill bodies Chipbreaker: DJ Plate form: Special Family use: Indexable full-bore drilling system FAQ What materials is this insert suitable for? The AH6030 PVD-coated carbide insert is designed for general drilling tasks and offers good wear and chipping resistance across a broad range of workshop materials, supporting stainless and alloyed steels as well as common ferrous materials when used with the correct parameters. How does the DJ chipbreaker affect performance? The DJ chipbreaker on the XPMT08T308R-DJ promotes controlled chip formation and evacuation, improving process stability and hole finish when combined with the TungDrillTwisted drill body and appropriate coolant strategy. Can the insert be used in any TDX drill body? The insert is intended for use with TDX/C-TDX drill bodies within the TungDrillTwisted system family; matching the insert size and seating to the specific drill body and L/D ratio is essential for optimal performance. What are the key geometric benefits of this insert? A 0.8 mm corner radius and 11° relief angle deliver a robust cutting edge for improved surface finish and reduced edge chipping, while the 3.97 mm plate thickness ensures secure clamping and stability. Is there a recommended application range for L/D ratios? The TungDrillTwisted family is differentiated by overhang length and L/D ratio; select the drill body and insert combination that matches machine capability and workpiece geometry for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH7020 Wendeplatten - Tungaloy
Take advantage of the AH7020 PVD-coated carbide and the DS chipbreaker to achieve stable, process-safe drilling with controlled chip formation and reliable edge life; order the insert via Metav Werkzeuge or ask their consultants for application-specific recommendations. XPMT 08T308 AH7020 indexable insert for drilling — Tungaloy The XPMT08T308R-DS AH7020 is a PVD-coated carbide indexable insert developed for productive, process-secure general drilling within the TungDrillTwisted changeable-insert system. PVD-coated carbide grade AH7020 for durability Designed for TDX changeable insert drilling systems 0.8 mm corner radius for stable cutting edge Cylindrical hole with single-side countersink DS chipbreaker for controlled chip formation Consistent edge life for uninterrupted production The AH7020 grade is a PVD-coated carbide developed to deliver wear- and break-resistant performance in drilling tasks where a sharp cutting edge and process security are required. The combination of coating and substrate enhances flank and crater wear resistance, which supports longer tool life and fewer indexings. This stability translates into more predictable production cycles and reduced interruption for tool changes, helping to lower overall machining costs. Modular system design for flexible machine integration Built for the TungDrillTwisted family, the insert forms part of a modular system using TDX/C‑TDX drill bodies and standard clamping screws. The family is differentiated by overhang (L/D) ratios and interface choices, enabling tailored selection of diameter, L/D, shank and insert variant according to machine capability, workpiece material and cooling arrangement. The modular approach simplifies stocking and speeds up reconfiguration for different jobs. Controlled chip formation and secure seating improve cycle time The DS chipbreaker and the insert’s hole geometry — a cylindrical hole with single-side countersink (40°–60°) — ensure reliable clamping and effective chip control at a variety of cutting conditions. A 0.8 mm corner radius and an 11° relief angle produce a robust cutting edge that reduces chipping risk while maintaining acceptable cutting forces. Improved chip evacuation reduces recut and tool wear, supporting higher feed rates and steadier surface quality. Practical guidance for selection and process stability For general drilling applications, select the insert size, overhang and body interface that match the machine’s rigidity and the intended L/D ratio. The indexable plate thickness of 3.97 mm and the special plate shape suit stable seating in the TDX bodies; clamping hardware and the assembly key complete the system for safe operation. For additional technical data or confirmation of fitment and coolant strategy, Metav Werkzeuge can provide detailed advice and component matching. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy XPMT08T308R-DS AH7020 inserts and TungDrillTwisted components — technical consultants are available to advise on L/D selection, shank compatibility and coolant optimisation. Technical data Article number: 6970305 Manufacturer SKU: TUN6970305 Metav SKU: 6970305-Tungaloy Manufacturer article number: 6970305 Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 08 Relief angle: 11° Hole countersink range: 40°–60° Special features Material: carbide Grade/coating: AH7020 (PVD) Chipbreaker: DS Plate form: special Hole: cylindrical hole with single-side countersink System: TungDrillTwisted with TDX/C‑TDX bodies, XPMT inserts, clamping screws and key Application: drilling FAQ What materials is this insert intended for? The AH7020 grade on the XPMT08T308R-DS insert is formulated for general drilling tasks where a sharp cutting edge and process security are required; specific material recommendations depend on workpiece properties and cutting parameters. How does the DS chipbreaker affect cutting performance? The DS chipbreaker on the insert promotes controlled chip segmentation and evacuation, which reduces recutting, helps maintain stable cutting forces and supports higher productive feeds when combined with correct coolant and speed settings. Which system components are required to use this insert? The insert operates within the TungDrillTwisted family and requires compatible TDX or C‑TDX drill bodies, the matching XPMT inserts, clamping screws and the assembly key for secure mounting. Is the 0.8 mm corner radius suitable for finishing operations? The 0.8 mm radius provides a balance between edge strength and surface finish; for fine finishing, different geometries or smaller radii may be preferable depending on the surface quality required. What does the AH7020 designation mean for wear resistance? AH7020 is a PVD-coated carbide grade optimised for wear and edge stability during drilling; it enhances resistance to flank and crater wear and is intended for process-secure cutting where breakage risk must be minimised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH7020 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH7020 carbide grade, a DW chipbreaker and a precise 0.8 mm corner radius for stable, repeatable drilling performance; order the inserts through Metav Werkzeuge or consult our specialists for application support. XPMT 08T308 AH7020 indexable insert for drilling — Tungaloy The XPMT08T308R-DW AH7020 is an indexable insert developed for full-bore insert drilling in the TungDrillTwisted family, optimised for process security and sharp cutting edges PVD-coated AH7020 carbide grade Designed for TDX/C‑TDX drilling bodies 0.8 mm corner radius for controlled cutting Cylindrical hole with one-sided countersink Reliable drilling through wear-resistant grade and coating The insert is built on a PVD-coated AH7020 carbide substrate that combines resistance to wear and chipping with a consistently sharp cutting edge. This composition delivers a rational advantage in production: longer tool life and fewer interruptions for index changes or regrinds. As part of the TungDrillTwisted system the insert contributes directly to improved process stability and predictable component quality during general drilling tasks. Geometry designed for controlled chips and accurate seating The insert geometry is engineered for reliable chip control and secure clamping. The 0.8 mm corner radius and DW chipbreaker promote regular chip formation and protect the cutting edge under varying feed rates, while the 11° free angle supports stable cutting forces. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for accurate positioning and positive mechanical engagement in TDX bodies. Plate thickness 3.97 mm and size 08 ensure robust support and repeatable seating. Compatibility within a modular drilling system for flexibility This family is differentiated by overhang (L/D) and interface and is supplied as a modular kit of TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and key. That modularity allows selection of diameter, L/D ratio, shank and insert grade to match machine capability, workpiece material and coolant strategy. The result is an efficient workflow: fewer tool variants, faster set-ups and the ability to adapt to diverse drilling requirements without sacrificing performance. Practical advantages for production environments In production the combination of a modern PVD coating and a purpose‑designed chipbreaker reduces downtime and enhances first‑pass quality, translating into measurable productivity gains. The insert’s special plate form and secure hole geometry provide consistent clamping behaviour, while the wear‑resistant grade helps maintain surface finish and dimensional accuracy over longer runs. For operations seeking dependable indexable solutions, this insert supports both process reliability and practical maintenance routines. For tailored cutting data, compatibility checks and to source Tungaloy XPMT inserts directly, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and supply options Technical data Article number: 6970288 SKU: 6970288-Tungaloy Manufacturer article number: TUN6970288 Label: XPMT08T308R-DW AH7020 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Free angle: 11° Plate thickness: 3.97 mm Plate size: 08 ISO designation: 08T308 Special features Coating / grade: AH7020 (PVD‑coated carbide) Chipbreaker: DW Hole: cylindrical hole + one-sided countersink (40°–60°) Plate form: special System family: TungDrillTwisted (TDX/C‑TDX bodies) Included components: XPMT inserts, clamping screws and key Application: drilling FAQ What machining operations is this insert intended for? The insert is designed for full-bore insert drilling within the TungDrillTwisted system; the XPMT08T308R-DW AH7020 performs in general drilling applications where a sharp cutting edge and process security are required. What are the advantages of the AH7020 grade and PVD coating? The AH7020 PVD‑coated carbide offers enhanced wear and chipping resistance, which helps the insert maintain a sharp edge and deliver stable performance under typical drilling loads. How is the insert secured in the drill body? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for precise seating and is clamped in TDX/C‑TDX bodies with the supplied clamping screws and key, ensuring reliable mechanical engagement. Which geometry and chip control features support process stability? Key geometry elements include the 0.8 mm corner radius, DW chipbreaker and 11° free angle; together these features support controlled chip formation, reduced edge chipping and consistent cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH7030 Wendeplatten - Tungaloy
Take advantage of the proven combination of a PVD-coated carbide grade for high wear resistance and a reliable DW chipbreaker for stable chip control, ensuring consistent drilling performance and reduced rework. Order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge technical team for application-specific recommendations. XPMT 08T308 AH7030 indexable insert for drilling — PVD-coated carbide, 0.8° corner radius — Tungaloy The XPMT 08T308 AH7030 indexable insert is a specialised cutting plate for general drilling within the TungDrillTwisted system, designed to deliver process security and a sharp, wear-resistant cutting edge. PVD-coated carbide AH7030 for wear resistance DW chipbreaker for improved chip control 0.8 mm corner radius for edge strength Cylindrical hole with single-sided countersink 40°–60° High-performance wear resistance for uninterrupted drilling The insert uses a PVD-coated carbide grade (AH7030) formulated for wear and notch resistance, which extends tool life under continuous drilling conditions. This material combination maintains a sharp cutting edge, reducing the need for frequent index changes and supporting longer uninterrupted production runs. The design suits general drilling where a balance between edge life and cutting precision is required, helping to keep cycle times consistent and rework minimal. Predictable chip formation and process stability Equipped with the DW chipbreaker, the plate promotes controlled chip formation and evacuation, which is essential when integrating the insert into the modular TungDrillTwisted drill body. Stable chip control reduces the risk of built-up edge and improves surface finish, particularly on mixed batches and varied materials. By pairing the insert with the correct drill body, shaft and machine parameters, reliable process behaviour is achieved, increasing overall productivity. Design features that support secure clamping and alignment The plate includes a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and repeatable seating in the TDX/ C‑TDX drill bodies. The 0.8 mm corner radius and the insert’s special form contribute to robust edge geometry, lowering the likelihood of chipping during entry and exit. These mechanical design details facilitate quick insert changes and predictable positioning, which is vital for reproducible hole quality and reduced setup time. Flexible system use and application guidance As a member of the TungDrillTwisted model family, the insert integrates into a replaceable-insert full-drill system that is differentiated by overhang length, L/D ratio and interface. Selection of the correct diameter, L/D, shank and the XPMT insert should be matched to the machining centre, workpiece material and coolant strategy. The system construction comprises TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and the required key, enabling a modular approach to tool inventory and fast adaptation to diverse drilling tasks. For reliable drilling performance with Tungaloy precision inserts, contact Metav Werkzeuge for ordering and tailored application support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6970297 Facts Manufacturer SKU: TUN6970297 Manufacturer item number: 6970297 Model series: TungDrillTwisted Material: Carbide Special features Insert designation: XPMT08T308R-DW Grade/coating: AH7030 (PVD-coated) Corner radius: 0.8 mm Relief angle: 11° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate form: special Plate size: 08 Chipbreaker: DW Application: Drilling FAQ What materials is this insert suitable for? The XPMT08T308R-DW AH7030 insert is designed as a wear- and notch-resistant solution; the PVD-coated carbide grade AH7030 suits a broad range of materials when used within the TungDrillTwisted system. How does the DW chipbreaker affect drilling performance? The DW chipbreaker on the XPMT insert promotes consistent chip formation and evacuation, reducing built-up edge and improving surface finish during general drilling operations. Can the insert be used in different overhang and L/D configurations? Yes, the insert is part of the TungDrillTwisted family and is intended for use with TDX/C‑TDX drill bodies that are selected according to overhang (L/D) and interface requirements. What clamping features ensure repeatable seating? The cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and repeatable seating in the drill body, supporting consistent hole quality and quick insert changes. Which SKU identifies this product for ordering? This insert is listed under the SKU TUN6970297 (manufacturer item number 6970297) for procurement and inventory management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH725 Wendeplatten - Tungaloy
Take advantage of a productive, process-secure drilling solution combining an exchangeable-insert full-bore system, a PVD-coated AH725 carbide grade and a precise 0.8 mm corner radius for consistent hole quality. Order the XPMT08T308R-DW AH725 directly via Metav Werkzeuge or ask our consultants if needed. XPMT 08T308 AH725 XPMT08T308R-DW — Insert for Drilling (Tungaloy) The XPMT08T308R-DW AH725 is an exchangeable-insert solution from the TungDrillTwisted series, designed for general drilling applications with TDX drill bodies and optimised for steel and stainless steels. Exchangeable insert full-bore system PVD-coated AH725 universal grade Suitable for steel and stainless steels 0.8 mm corner radius for precise holes Productivity through an exchangeable-insert system The TungDrillTwisted family combines TDX drill bodies with the XPMT insert concept to reduce tooling costs and downtime. The system’s modular design enables fast insert changes and predictable tool-life cycles, which translates into shorter machine idle times and more efficient batch production. By separating the cutting edge from the body, reconditioning and inventory management become simpler while maintaining consistent results across repetitive runs. Reliable cutting performance with AH725 grade The PVD-coated AH725 grade is a universal, fracture-resistant carbide developed for mixed-material production where process security is critical. The coating improves wear resistance under varying cutting conditions and supports stable chip formation when machining both carbon steels and stainless steels, making the insert a sensible choice for shops facing frequent material changes. This yields fewer rejected parts and a steadier production rhythm. Hole accuracy and chip control for demanding components A corner radius of 0.8 mm and a relief angle of 11° contribute to dimensional stability and edge strength during drilling. The plate’s special form and the DW chipbreaker are engineered to promote controlled chip flow, reducing the risk of clogging in medium-depth holes. The insert design, combined with the specified thickness of 3.97 mm, helps maintain concentricity and improves surface finish in through-holes and blind-hole operations. System composition and application guidance for optimal use The family is differentiated by overhang/L‑D ratios and interfaces; typical assemblies comprise TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and the required keys. Selection should be made according to required diameter, L/D ratio, shank type and the chosen XPMT insert variant, taking into account machine rigidity and cooling strategy. Matching these parameters ensures the system delivers the expected balance of productivity and tool life. For tailored advice on integrating Tungaloy’s PVD-coated AH725 inserts into production, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 — to discuss suitable drill bodies, L/D choices and supply options. Technical data Article number: 6861457 Manufacturer SKU: TUN6861457 Brand: Tungaloy Model series: TungDrillTwisted Application: Drilling Insert designation: XPMT08T308R-DW AH725 Core specifications Corner radius: 0.8 mm Relief angle: 11° Insert size: 08 Insert thickness: 3.97 mm Countersink angle: 40°–60° Insert hole: with hole Materials & features Material: Carbide Coating: PVD, grade AH725 Chipbreaker: DW Plate form: Special System components: TDX/C‑TDX drill bodies, XPMT inserts, clamping screws, key Typical application: General drilling; select diameter, L/D, shank and insert to match machine, material and cooling FAQ What materials is this insert suitable for? The XPMT08T308R-DW AH725 is specified for machining steel and stainless steels; the AH725 PVD-coated carbide provides broad applicability and improved process security across these materials. How does the corner radius affect hole quality? A 0.8 mm corner radius increases edge strength and contributes to dimensional stability, producing more consistent hole diameters and improved surface finish during drilling operations. What does the DW chipbreaker do? The DW chipbreaker is designed to promote controlled chip formation and evacuation, which reduces the risk of clogging and supports stable cutting conditions in medium-depth drilling. Which drill bodies are compatible with these inserts? The inserts are intended for use with TDX and C‑TDX drill bodies as part of the TungDrillTwisted system; the family is differentiated by overhang (L‑D) and interface, so select the body to match the desired geometry. How should I choose insert size and shank for a new application? Base the selection on required diameter, the expected L/D ratio, machine rigidity and coolant availability; matching the XPMT insert variant and the appropriate TDX drill body is crucial for attaining the planned process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH9030 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH9030, a secure clamping hole with single countersink and the proven TDX indexable system for dependable, low-maintenance drilling; order matching components or consult Metav Werkzeuge for application support. XPMT 08T308 AH9030 indexable insert for full-bore drilling – PVD-coated carbide by Tungaloy XPMT 08T308 AH9030 is an indexable insert designed for TDX full-bore drilling systems, optimised for a sharp cutting edge and high process reliability in general drilling applications PVD-coated carbide AH9030 for edge strength 0.8 mm corner radius for consistent finishes Cylindrical hole with single countersink 40°–60° Chipbreaker DJ for controlled swarf evacuation Consistent edge life through wear-resistant grade The AH9030 grade is a PVD-coated carbide developed to provide wear- and chipping-resistant performance where a sharp cutting edge is essential. Its coating and substrate combination reduce flank wear and maintain a stable cutting edge, which leads to repeatable hole tolerances and extended intervals between indexings. For operations prioritising cycle stability, this translates into predictable tool-change schedules and fewer unscheduled stoppages. Secure clamping and chip control reduce rework A precise cylindrical hole with a single countersink (40°–60°) and the tailored chipbreaker DJ combine to ensure reliable seating and effective swarf control during drilling. The controlled geometry stabilises the insert under axial and radial loads, while the chipbreaker shapes the cut material to reduce interference with coolant flow. Together these features help to lower the risk of built-up edge and minimise surface defects, improving first-pass quality. Geometry tuned for reliable surface quality The insert’s 0.8 mm corner radius and 3.97 mm plate thickness support consistent surface finishes and dimensional control across a range of feeds and speeds. The special plate form provides a defined cutting edge contour, enabling operators to select a compromise between robustness and edge sharpness depending on the workpiece requirement. This makes the insert suitable where process security and a defined finish are required rather than aggressive material removal alone. System approach for faster serviceability and compatibility As part of the TungDrillTwisted family, the insert is intended for use with TDX/C-TDX drill bodies and a complete accessory set including clamp screws and keys. The modular system design simplifies inventory management: matching inserts, bodies and fastenings are chosen according to overhang (L/D) and interface to suit the machine and coolant strategy. This system mindset reduces changeover time on the shopfloor and supports efficient integration into existing drilling processes. For reliable integration of AH9030 inserts into TDX drilling systems, contact Metav Werkzeuge for component matching and application advice; Metav Werkzeuge can recommend the appropriate bodies and clamping hardware to secure consistent production results Technical data Article number: 6718253 Manufacturer SKU: TUN6718253 SKU: 6718253-Tungaloy Model series: TungDrillTwisted Insert designation: XPMT08T308R-DJ AH9030 Facts Material: Carbide Coating / Grade: AH9030 (PVD) ISO code: 08T308 Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 3.97 mm Plate size: 08 Special features Chipbreaker: DJ Hole: with hole; cylindrical hole + single countersink (40°–60°) Plate form: special System components: TDX/C-TDX drill bodies, XPMT inserts, clamp screws and key FAQ Which materials is this insert suitable for? The XPMT08T308R-DJ AH9030 insert is designed for applications where a sharp cutting edge and process security are required; its PVD-coated carbide construction provides general versatility across common machining tasks. How does the chipbreaker DJ affect machining? The chipbreaker DJ on the XPMT08T308R-DJ shapes chips to improve evacuation and coolant interaction, reducing the likelihood of chip jamming and promoting stable cutting conditions. Can the insert be used with existing TDX drill bodies? Yes, the insert is intended for the TungDrillTwisted family and is compatible with TDX/C-TDX drill bodies; matching the insert ISO and seat is essential for proper clamping and performance. What is the benefit of the cylindrical hole with single countersink? The cylindrical hole with a single countersink (40°–60°) ensures a secure mechanical location and optimised clamp force distribution, which supports repeatable seating and improved process reliability. How should replacement inserts be stocked for efficient shop use? Store matched sets of inserts, clamp screws and keys to reduce changeover time; using the modular system approach of the TungDrillTwisted family simplifies selection and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 08T308 AH9030 Wendeplatten - Tungaloy
Take advantage of the combination of modular design, a wear-resistant PVD-coated carbide grade and precise corner geometry for stable, repeatable drilling cycles. Order directly via Metav Werkzeuge or request advice from the consultants for selection and optimisation. XPMT 08T308 AH9030 — indexable insert for TDX drilling systems (Tungaloy) XPMT 08T308 AH9030 is an indexable insert developed for modular full-bore drilling with TDX/C‑TDX bodies, suited to general drilling where sharp cutting edges and process security are required PVD-coated carbide grade AH9030 Compatible with TDX/C‑TDX drill bodies Cylindrical hole with single-side countersink 0.8 mm corner radius for precise engagement Consistent performance through modular system design The modular drilling family is built around TDX drill bodies and replaceable indexable inserts, enabling quick adaptation to varying overhangs and L/D ratios. The system architecture permits selection of diameter, L/D, shank and insert to match machine capability, workpiece material and cooling strategy, which reduces setup complexity and keeps cycle times predictable. Integration with TDX/C‑TDX bodies supports straightforward seating and secure fixation, promoting steady tool life and fewer unplanned interruptions. Durable grade and reliable cutting geometry for process security The AH9030 grade is a PVD‑coated carbide developed for combined wear and chipping resistance where a sharp edge is essential. The coating and substrate pairing maintain a stable cutting edge under fluctuating loads, which contributes to process security and repeatable surface results. For manufacturing environments that prioritise uptime and consistent part quality, the grade offers balanced resistance to abrasion and mechanical stress while preserving edge integrity for extended intervals between indexings. Precise insert geometry that simplifies clamping and reuse The insert specification XPMT08T308R‑DW AH9030 features a 0.8 mm corner radius, a plate thickness of 3.97 mm and a cylindrical hole with a single‑side countersink (40°–60°), combined with a DW chipbreaker. These attributes ensure reliable seating in the pocket, controlled chip formation and reduced risk of edge breakage during entry. The special plate form and standard clamping screw arrangement permit rapid replacement and consistent positioning, lowering handling time while keeping repeatability high across batches. Practical advantages for production and workshop environments As part of a full drilling system, the insert family and bodies aim to increase process efficiency and tool economy in serial production as well as jobbing shops. The combination of a modular drilling system, wear‑resistant grade and measured corner geometry helps to reduce scrap and rework, and supports stable feed and speed selection. Selection of the correct insert size and L/D ratio will align cutting conditions with machine power and coolant delivery to obtain the best compromise between tool life and productivity. For tailored recommendations on Tungaloy indexable drilling components or assistance choosing the correct XPMT insert for a specific machine and material, contact Metav Werkzeuge at info@metav-werkezeuge.com or call +49 2822 7131930 for expert support Technical data Manufacturer item no.: 6718267 SKU: 6718267-Tungaloy Manufacturer SKU: TUN6718267 Model series: TungDrillTwisted Insert designation: XPMT08T308R-DW AH9030 Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Insert size: 08 Relief angle: 11° Countersink angle: 40°–60° Special features Coating / grade: AH9030 (PVD‑coated carbide) Chipbreaker: DW Hole style: cylindrical hole + single‑side countersink Plate form: special System components: TDX/C‑TDX bodies, XPMT inserts, clamping screws and key FAQ What materials is this insert grade intended for? The AH9030 PVD‑coated carbide insert is designed for applications requiring wear resistance and chipping protection; material selection and cutting data should be matched to the machine and coolant to achieve optimal results. How does the insert attach to the drill body? The insert seats in TDX/C‑TDX drill bodies and is secured with clamping screws; the cylindrical hole with single‑side countersink ensures correct orientation and stable fixation. What does the DW chipbreaker provide? The DW chipbreaker promotes controlled chip formation for improved evacuation and reduced tendency for edge overload during entry, contributing to consistent process behaviour. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius balances edge strength and dimensional control, easing engagement at cut‑in while helping to resist chipping in interrupted cuts. Is the insert compatible with different overhangs and L/D ratios? Yes, the modular design of the drilling family allows selection of bodies and inserts aligned with the required L/D ratio and overhang, ensuring adaptability to various production setups. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com