XPMT 110412 AH6030 Wendeplatten - Tungaloy
The combination of a PVD-coated AH6030 grade and a sharp, wear-resistant cutting edge delivers stable chip formation and consistent process security for indexable full-bore drilling. Matched with the TungDrillTwisted family of TDX bodies, this insert supports efficient changeover and predictable tool life — order the insert directly via Metav Werkzeuge or consult the team for selection support. XPMT110412R-DJ AH6030 (XPMT 110412) – Indexable drill insert for general drilling | Tungaloy The XPMT110412R-DJ AH6030 is a PVD-coated carbide insert for TDX-series indexable full-bore drilling systems, optimised for reliable general drilling across a wide range of materials. PVD-coated carbide grade AH6030 Optimised for process reliability and sharp edge Cylindrical hole with 40°–60° countersink 1.2 mm corner radius for consistent chip control Optimised system performance for diverse machining tasks This insert is engineered for use in an indexable full-bore drilling system and pairs with the TungDrillTwisted TDX drill bodies to enable controlled, repeatable drilling cycles. The modular design reduces tool change time and simplifies inventory: the indexable format lets production engineers adapt diameter, L/D ratio and shank interface independently from the cutting edge. With a TDX drill body and a suitable insert geometry, the system offers a robust basis for full-bore drilling in production environments that demand consistent cycle times and reproducible hole quality. Durable cutting geometry that extends in-process stability The AH6030 grade is a PVD-coated carbide designed for combined wear and chipping resistance while maintaining a sharp cutting edge where required. This balance reduces flank wear without sacrificing initial cutting performance, which in turn improves process reliability under variable cutting conditions. For operations where edge integrity and stable tool life are critical, the substrate and coating combination helps to keep machining tolerances within specification over longer runs, lowering the frequency of interventions and unplanned stoppages. Precise geometry for dependable chip control and clamping A controlled edge radius and chipbreaker design translate into predictable chip flow and secure insert seating. The insert features a chipbreaker DJ together with a 1.2 mm corner radius, which promotes manageable chip formation on interrupted or continuous cut conditions. The free clearance 11° and a cylindrical hole with one-sided countersink (40°–60°) ensure reliable screw clamping and repeatable seat location in the TDX pocket. These attributes reduce the likelihood of insert movement and support consistent surface finish and dimensional stability. Practical system integration to reduce setup time and increase throughput The TungDrillTwisted family is differentiated by overhang/L‑D ratio and interface; selecting the right combination of drill body, shank and the XPMT insert allows fine-tuning for machine, workpiece material and coolant strategy. The system comprises TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and the corresponding key, offering a complete solution that simplifies procurement and assembly. Careful matching of insert grade and geometry to the application yields higher material removal rates and lower downtime, contributing directly to operational efficiency. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy AH6030 inserts into existing tool programmes — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and availability Technical Data Manufacturer article number: 6718261 SKU: 6718261-Tungaloy Manufacturer SKU: TUN6718261 Model series: TungDrillTwisted Insert designation: XPMT110412R-DJ AH6030 Facts Corner radius: 1.2 mm Free clearance angle: 11° Plate size: 11 Special features Material: carbide Coating / grade: AH6030 (PVD) Chipbreaker: DJ Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Plate form: special Series application: indexable full-bore drilling system (TDX bodies) FAQ What materials is this insert suitable for? The XPMT110412R-DJ AH6030 insert is designed for a broad material spectrum when used in the TungDrillTwisted system; the AH6030 grade balances wear resistance and edge strength for reliable performance across many steels and alloyed materials. How does the AH6030 grade affect tool life and process stability? AH6030 is a PVD-coated carbide grade that reduces flank wear and resists chipping, which helps maintain cutting geometry and enhances process reliability over extended cycles when using the XPMT insert in TDX drill bodies. What benefits does the chipbreaker DJ provide? The chipbreaker DJ steers chip formation to avoid long, stringy chips and supports stable evacuation, improving surface finish and reducing the risk of recutting or chip entanglement during drilling. Which drill bodies are compatible with this insert? Compatibility is with the TDX/C‑TDX drill bodies within the TungDrillTwisted family; the system is matched by overhang/L‑D ratio and interface to ensure correct seating and clamping of the XPMT insert. How is the insert secured in the drill body and what features aid repeatability? The XPMT insert uses the cylindrical hole with a one-sided countersink (40°–60°) and is clamped using the designated clamping screws; this arrangement, together with the insert flat/seat geometry, ensures repeatable positioning and secure retention under cutting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH6030 Wendeplatten - Tungaloy
With a PVD‑coated AH6030 grade and a 1.2 mm corner radius, the insert combines wear resistance and edge stability to support consistent, high‑productivity drilling. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. XPMT 110412 AH6030 — XPMT110412R‑DW indexable insert for TungDrillTwisted drilling system (Tungaloy) The XPMT110412R‑DW AH6030 is an indexable carbide insert intended for use in TDX drill bodies within the TungDrillTwisted family, engineered for general drilling tasks where process security and a sharp cutting edge are required. PVD‑coated AH6030 for high wear resistance Cylindrical hole with 40°–60° countersink 1.2 mm corner radius for robust cutting edge DW chipbreaker for reliable chip control Durable grade and coating for longer tool life The AH6030 cutting grade is a PVD‑coated carbide engineered to deliver wear resistance and improved resistance to chipping under variable cutting conditions. The coating reduces adhesive wear and helps preserve a sharp cutting edge, which in turn maintains dimensional consistency and surface finish over longer tool life. For practical terms, a coated grade like this lowers the frequency of insert changes and keeps machine uptime high — a direct advantage for production environments that prioritise predictable cycle times. Secure seating and system compatibility reduce variability Designed for the TungDrillTwisted family, the insert seats in TDX / C‑TDX drill bodies, creating a complete indexable‑insert drilling system. The cylindrical hole with a one‑sided countersink (40°–60°) ensures accurate axial positioning and a stable clamping interface when installed with the matching clamping screw. Stable seating minimises micro‑movement and vibration, which improves repeatability and surface quality. The system approach — drill body, insert, clamping screw and key — simplifies maintenance and replacement while keeping setup times short. Geometry choices that balance edge strength and cutting performance The insert’s 1.2 mm corner radius and 11° clearance angle provide a balanced geometry for general drilling: the radius offers edge reinforcement to resist corner chipping, while the clearance angle reduces rubbing and heat build‑up. The DW chipbreaker is configured for dependable chip formation and evacuation in a wide range of cutting conditions; this supports consistent feeds and speeds across varying materials. When specifying a drill, match diameter, L/D ratio and shank type to the machine and workpiece; in assemblies with coolant supply, the system can be tuned for higher removal rates without compromising edge integrity. Contact Metav Werkzeuge for tailored application support and secure the suitable TungDrillTwisted insert AH6030 to enhance process stability and productivity Technical data Article number: 6718275 Manufacturer SKU: TUN6718275 Label: XPMT110412R‑DW AH6030 Material: Hartmetall Plate form: Sonder Facts Corner radius: 1.2 mm Clearance angle: 11° Plate size: 11 Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features PVD‑coated AH6030 grade DW chipbreaker for reliable chip control Model series: TungDrillTwisted System components: TDX / C‑TDX drill bodies, XPMT inserts, clamping screws and key Typical application: general drilling; select diameter, L/D, shank and insert to suit machine, workpiece and cooling FAQ Which materials is this insert suited to machine? The XPMT110412R‑DW AH6030 insert is intended for general drilling applications; the AH6030 grade is formulated for wear‑resistant performance across a broad range of workpiece materials when paired with appropriate cutting data. How does the cylindrical hole plus countersink benefit assembly? The cylindrical hole with a 40°–60° one‑sided countersink provides precise axial location and a secure clamping seat, improving the mechanical stability of the insert when mounted in TDX drill bodies. What is the practical effect of the 1.2 mm corner radius? A 1.2 mm corner radius reinforces the cutting edge to resist chipping during interrupted cuts and higher feed operations, contributing to longer edge life and steadier dimensional results with the insert. Is the DW chipbreaker suitable for high material removal rates? The DW chipbreaker is designed for dependable chip formation and evacuation in general drilling; combined with correct coolant and cutting parameters, it supports sustained removal rates while preserving process stability. Which components are required to build a complete drilling system? A complete TungDrillTwisted drilling system comprises the TDX or C‑TDX drill body, XPMT inserts such as the XPMT110412R‑DW AH6030, the correct clamping screw and the assembly key to ensure secure mounting and repeatable performance. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
XPMT 110412 AH6030 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6030 carbide, modular TDX drill bodies and a DS chipbreaker for consistent hole quality and process reliability; order the XPMT110412R-DS AH6030 directly via Metav Werkzeuge or ask the consultants for application advice. XPMT 110412 AH6030 indexable insert full-bore drilling system with TDX drill bodies – Tungaloy The XPMT 110412 AH6030 is an indexable-insert full-bore drilling system engineered for general drilling tasks, pairing PVD-coated carbide inserts with modular TDX drill bodies for adaptable shop-floor use. PVD-coated carbide AH6030 for wear resistance TDX drill bodies for secure, modular assembly DS chipbreaker for stable chip formation Cylindrical hole with one-sided countersink 40°–60° Consistent cutting performance for reliable production The PVD-coated AH6030 grade provides a balance of wear resistance and fracture toughness that supports a sharp cutting edge and process reliability. The indexable insert concept allows fast replacement of the XPMT plates, reducing machine downtime and maintaining repeatable hole quality. Using a system designed for secure clamping on TDX bodies ensures consistent tool geometry at every change, which translates into fewer rejects and steadier cycle times on production runs. Modular design that adapts to machine and job A family approach differentiates the system by overhang/L‑D ratio and interface, enabling selection of diameter, L/D, shank and insert to suit the machine, workpiece and cooling strategy. The DS chipbreaker supports controlled chip formation for a wide range of cutting conditions, so the modular configuration delivers flexibility without sacrificing stability. This adaptability shortens setup times and simplifies tool inventory while supporting productive machining sequences. Material suitability and edge-life benefits for everyday drilling Designed as a versatile solution for general drilling, the insert geometry and AH6030 coating are intended for operations where a sharp cutting edge and reduced tool breakage are priorities. Stable chip evacuation and optimised cutting behaviour improve surface finish and dimensional consistency, particularly when combined with the correct drill body and cutting parameters. For workshops seeking predictable tool life and process security, this system provides a pragmatic route to more consistent results. Contact Metav Werkzeuge for tailored recommendations on Tungaloy’s XPMT 110412 AH6030 to ensure the right combination of drill body and insert for the application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6718282 SKU: 6718282-Tungaloy Manufacturer SKU: TUN6718282 Label: XPMT110412R-DS AH6030 Model series: TungDrillTwisted Material: carbide Insert designation: XPMT110412R-DS Facts ISO code: 110412 Corner radius: 1.2 mm Relief angle: 11° Plate size: 11 Countersink angle range: 40°–60° Article number: 6718282 Special features Coating: AH6030 (PVD) Chipbreaker: DS Insert form: Special Hole: with cylindrical hole and one-sided countersink System: indexable-insert full-bore drilling system with TDX bodies Family: differentiated by overhang / L‑D ratio and interface FAQ What type of drilling tasks is this system intended for? The XPMT110412R-DS AH6030 is intended for general drilling applications where a sharp cutting edge and process reliability are required; it suits operations that benefit from indexable inserts and modular drill bodies. How does the AH6030 coating influence performance? The PVD AH6030 coating increases wear resistance and supports a robust cutting edge, which improves tool life and reduces the likelihood of insert chipping in typical drilling cycles. How are the inserts secured and exchanged? Inserts are clamped to the TDX drill bodies using the supplied clamping screws and key; the modular design allows quick replacement of XPMT plates without changing the whole tool body. What role does the DS chipbreaker play? The DS chipbreaker promotes stable chip formation and evacuation, which helps maintain consistent cutting forces and improves hole quality under a variety of cutting conditions. Can the system be adapted for different overhangs and machines? Yes, the TungDrillTwisted family is differentiated by overhang/L‑D ratio and interface, allowing selection of diameter, shank and insert to match machine capabilities and machining requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH7020 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH7020), a 1.2 mm corner radius and the modular TungDrillTwisted system for stable, repeatable drilling processes; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. XPMT 110412 AH7020 indexable insert for drilling – Tungaloy A precise indexable cutting insert, XPMT 110412 AH7020, designed for general drilling applications in modular TDX drill bodies PVD-coated carbide grade AH7020 Chipping- and wear-resistant cutting edge 1.2 mm corner radius for stable engagement Cylindrical hole with single‑side countersink Consistent cutting performance through PVD-coated carbide The PVD-coated carbide grade AH7020 delivers a balanced combination of wear resistance and edge integrity for general drilling operations. The coating improves thermal and abrasive resistance while the carbide substrate maintains toughness, which together reduce premature flank wear and edge chipping. This results in more consistent hole quality and extended tool life under fluctuating cutting conditions, supporting higher process reliability in production runs. Predictable chip formation and secure clamping for reduced downtime A deliberately engineered 1.2 mm corner radius and the chipbreaker DW geometry promote controlled chip formation and stable cutting engagement. The insert’s cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping in TDX-style holders and helps maintain repeatable tool positioning. These design aspects reduce the risk of insert loosening and unexpected interruptions, contributing to smoother cycle times and fewer tool changes on the shop floor. Modular system design for flexible tooling strategies The insert is part of the TungDrillTwisted family, which comprises TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and a single key. Families are differentiated by overhang (L/D) and interface, enabling the selection of diameter, L/D ratio, shaft and insert type that best match machine capability, workpiece material and coolant strategy. This modular approach reduces inventory variety while enabling rapid reconfiguration for diverse drilling tasks. Practical advantages for machining operations Designed for general drilling, the special plate form and robust PVD-coated hardmetal substrate favour applications that demand a sharp cutting edge combined with process security. The insert’s features support repeatable hole tolerances and surface condition, while the compatible system components simplify assembly and replacement. When process parameters or workpiece composition change, the modular nature of the system allows straightforward adaptation without a complete tooling redesign. Contact Metav Werkzeuge for tailored application support or to request the Tungaloy XPMT 110412 AH7020 insert and recommendations for the matching TDX drill body – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6970289 SKU: 6970289-Tungaloy Manufacturer SKU: TUN6970289 Model series: TungDrillTwisted Material: Hartmetall Insert designation: XPMT110412R-DW Grade/sort: AH7020 Facts Corner radius: 1.2 mm Relief angle: 11° Plate size: 11 Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features PVD-coated carbide (AH7020) Chipbreaker: DW Plate form: special System components: TDX/C‑TDX bodies, XPMT inserts, clamping screws, key Application: drilling Family differentiated by overhang (L/D) and interface FAQ What materials is this insert best suited for? The XPMT 110412 AH7020 insert is formulated as a wear- and chipping-resistant PVD-coated carbide, making it suitable for a broad range of general drilling tasks where a sharp cutting edge and process security are required. How does the 1.2 mm corner radius affect drilling results? A 1.2 mm corner radius increases engagement stability and helps distribute cutting forces, which promotes improved hole quality and reduces the likelihood of edge chipping with the XPMT insert in TDX bodies. Which drill bodies are compatible with these inserts? The insert is intended for use with the TungDrillTwisted family’s TDX and C‑TDX drill bodies; compatibility depends on the specific overhang (L/D) and interface variation selected for the application. What is the benefit of the cylindrical hole with single‑side countersink? The cylindrical hole combined with a single‑side countersink (40°–60°) provides secure clamping and precise seating in the holder, supporting repeatable positioning and reduced insert movement during drilling. Can the insert geometry reduce tool changes and downtime? Yes. The combination of PVD coating, robust carbide substrate and chipbreaker geometry delivers stable cutting behaviour and prolonged edge life, which helps reduce frequent insert replacements and associated downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH7020 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH7020 wear resistance, the DS chipbreaker for controlled swarf, and a secure clamping concept to maintain continuous drilling performance; order the inserts directly via Metav Werkzeuge or consult the team for specification support. XPMT 110412 AH7020 XPMT110412R-DS — Indexable insert for drilling with PVD-coated carbide and cylindrical hole + countersink by Tungaloy The XPMT110412R-DS AH7020 is an indexable insert designed for the TungDrillTwisted full-drill system, engineered for general drilling tasks where a sharp cutting edge and dependable process security are required. PVD-coated carbide AH7020 Compatible with TungDrillTwisted TDX drill bodies Cylindrical hole with 40°–60° one-sided countersink 1.2 mm corner radius and 11° clearance angle Consistent tool life through a wear-resistant grade The core advantage of the insert is the AH7020 grade, a PVD-coated cemented carbide developed for high resistance to wear and edge chipping. This material combination delivers predictable performance during extended cycles, reducing the frequency of insert changes and machine downtime. By stabilising the cutting edge, the insert supports improved process security and allows for more consistent cycle times in serial drilling operations. Secure clamping and system compatibility for reliable set-up The insert’s cylindrical hole with a one-sided countersink (40°–60°) and the matching shank/interface concept ensure robust mounting in TDX drill bodies of the TungDrillTwisted family. The system comprises TDX/C-TDX drill bodies, XPMT inserts, clamping screws and the matching key, which together simplify configuration by length/overhang (L/D) and interface. This results in a dependable connection that resists movement under cutting loads and supports repeatable concentricity. Improved chip control and stable cutting geometry Equipped with the DS chipbreaker and a 1.2 mm corner radius, the insert is optimised for controlled swarf formation and stable cutting forces. The modest corner radius offers a balance between edge strength and surface finish, while the 11° clearance angle reduces rubbing on the flank face. Together these features help to maintain surface quality and reduce the risk of built-up edge on materials that tend to work harden. Practical flexibility for general drilling applications The indexable design permits quick replacement and selection of insert geometry to match machine capability, coolant strategy and workpiece requirements. When combined with the TungDrillTwisted drill bodies, the system supports a wide range of drilling tasks within general production environments. Specification of diameter, L/D ratio and shank should be matched to the application to exploit the PVD-coated AH7020 grade and the insert’s mechanical features for optimum results. Discuss the suitability of Tungaloy XPMT110412R-DS AH7020 inserts with Metav Werkzeuge to ensure optimal drilling parameters and process security — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6970308 Manufacturer SKU: TUN6970308 Supplier SKU: 6970308-Tungaloy Model series: TungDrillTwisted Insert designation: XPMT110412R-DS Grade: AH7020 Core specifications Corner radius: 1.2 mm Clearance angle: 11° Insert size: 11 Countersink angle range: 40°–60° Designs and special features PVD-coated cemented carbide Chipbreaker: DS Hole style: cylindrical hole with one-sided countersink Plate form: special shape (Sonder) System components: TDX/C-TDX drill bodies, XPMT inserts, clamping screws and key Typical application: drilling FAQ What materials is this insert intended for? The XPMT110412R-DS AH7020 insert is specified for general drilling tasks and performs across a broad range of workpiece materials when used with the appropriate TungDrillTwisted drill body and coolant strategy. How does the AH7020 grade benefit machining? The AH7020 PVD-coated grade provides improved wear resistance and reduced edge chipping, enabling longer tool life and more stable machining conditions with the XPMT110412R-DS insert. Which drill bodies are compatible with this insert? Compatibility is with TDX style drill bodies from the TungDrillTwisted family; the system is designed for secure mounting and repeatable interface performance. What is the purpose of the DS chipbreaker? The DS chipbreaker optimises swarf formation and evacuation during drilling, lowering the risk of clogging and supporting consistent surface quality. How does the insert’s hole and countersink affect clamping? The cylindrical hole plus one-sided countersink (40°–60°) ensures a robust mechanical fit and positive seating within the drill body, improving stability under cutting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH7020 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH7020 grade for extended wear resistance, a 1.2 mm corner radius for stable cutting, and modular TDX drill-body compatibility for fast insert changes; order the insert directly via Metav Werkzeuge or consult the specialists for application-specific setup. XPMT 110412 AH7020 – XPMT110412R-DJ indexable insert for drilling (Tungaloy) An XPMT110412R-DJ AH7020 indexable insert engineered for general drilling within the TungDrillTwisted family, optimised for modular TDX full‑drill bodies and secure, repeatable performance. PVD-coated AH7020 for wear resistance 1.2 mm corner radius for stable cutting Cylindrical hole with single-side countersink Compatible with TDX full-drill bodies High‑performance coating and insert geometry for dependable productivity The combination of a PVD-coated surface and a wear-resistant AH7020 carbide substrate delivers consistent cutting-edge stability under typical drilling loads. The protected surface reduces flank wear and supports a sharp edge, which leads to predictable tool life and uptime. Specified as an indexable plate within a full‑drill system, this design is suitable where a sharp cutting edge and process security are both required. The controlled geometry of the insert reduces the risk of unexpected breakouts and contributes to efficient metal removal in repeated cycles. Modular system design that reduces downtime and simplifies setup Designed for the TungDrillTwisted series, the system uses TDX/C‑TDX drill bodies with XPMT plates, clamping screws and a dedicated key for fast replacement. The modular approach means that different overhangs and L/D ratios can be selected without changing the entire tool body, so set‑ups are quicker and machine availability improves. Where production calls for quick index changes, the system layout reduces the time spent on maintenance and rework, promoting a smoother production flow and predictable cycle times. Chip control and hole integrity for secure holemaking The insert features a DJ chipbreaker and a cylindrical hole with a single‑side countersink (40°–60°), engineered to support consistent chip formation and evacuation. The 1.2 mm corner radius increases edge strength and helps maintain dimensional stability on entry and exit. A relief angle of 11° further balances cutting forces and edge life. Together these elements minimise vibration and support repeatable hole quality, particularly in general drilling applications where process reliability is essential. Practical selection advice and typical applications Selection of diameter, L/D ratio, shank type and the correct XPMT insert should match the machine capability, the workpiece and cooling method. The insert family is differentiated by overhang length and interface, allowing adaptation to a wide range of drilling tasks. Intended primarily for drilling operations, the plate is a practical choice when a robust cutting edge and high process security are priorities. For set‑ups requiring predictable performance and easy maintenance, the modular TDX system with XPMT inserts offers a pragmatic balance between productivity and operational simplicity. Contact Metav Werkzeuge for tailored advice on the XPMT110412R-DJ AH7020 insert and specification assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 7755713 Manufacturer SKU: TUN7755713 SKU: 7755713-Tungaloy Label: XPMT110412R-DJ AH7020 Core specifications Corner radius: 1.2 mm Relief angle: 11° Plate size: 11 Plate form: Special Hole style: Cylindrical hole + single-side countersink (40°–60°) Chipbreaker: DJ Coating/sort: AH7020 Material: Carbide (Hartmetall) Special features Model series: TungDrillTwisted System build: TDX/C‑TDX bodies with XPMT plates, clamping screws and key Application: Drilling Insert designation: XPMT110412R‑DJ Family differentiation: by overhang length / L‑D ratio and interface FAQ What materials is this insert intended for? The XPMT110412R‑DJ AH7020 insert is developed for general drilling where a sharp cutting edge and process security are required; material selection should be matched to machine capability and cooling strategy. How does the AH7020 grade improve performance? The AH7020 PVD‑coated carbide provides enhanced wear resistance and edge stability, which supports longer tool life and more consistent drill cycles. Can the insert be used with different overhangs and L/D ratios? Yes, the TungDrillTwisted family is differentiated by overhang length and interface, allowing selection of suitable L/D ratios while using the same insert geometry. What is the purpose of the countersunk hole and DJ chipbreaker? The cylindrical hole with a single‑side countersink and the DJ chipbreaker improve clamping reliability and chip control, aiding evacuation and maintaining dimensional accuracy. Is the XPMT110412R‑DJ compatible with TDX drill bodies? The insert is specifically designed for use in TDX/C‑TDX full‑drill bodies as part of the modular system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH7030 Wendeplatten - Tungaloy
Take advantage of a wear-resistant PVD-coated AH7030 grade on a precision carbide insert combined with a proven DW chipbreaker and secure cylindrical-hole fixing for consistent hole quality and reduced downtime; order directly via Metav Werkzeuge or consult the team for cutting data and application advice. XPMT110412R-DW AH7030 XPMT 110412 indexable drilling insert by Tungaloy A robust XPMT110412R-DW AH7030 indexable carbide insert intended for general drilling within TDX-bodied full-hole drilling systems, offering high process security and reliable edge strength for industrial machining. PVD-coated carbide AH7030 for wear resistance Designed for TDX indexable drill bodies DW chipbreaker for controlled chip formation Cylindrical hole plus single-sided countersink Reliable process security for demanding drilling tasks The combination of a PVD-coated surface and the AH7030 carbide grade provides a balance of wear resistance and edge toughness that translates into consistent hole quality and fewer interruptions for insert changes. The coating reduces adhesion and thermal wear, which means fewer edge failures under interrupted cuts or variable feed conditions. For workshops seeking reproducible results, this specification reduces scrap rates and helps maintain process windows over longer production runs. Seamless integration with TDX-bodied indexable drill systems Part of the TungDrillTwisted family, this insert is designed to work with TDX drill bodies and compatible clamping systems, enabling simple interchangeability across drills differentiated by overhang and L/D ratio. The system approach — comprising the TDX/C-TDX bodies, XPMT inserts, clamping screws and the assembly key — simplifies tool selection: choose the appropriate body overhang and insert geometry for the desired L/D and machine interface, ensuring stable drilling dynamics and predictable tool life. Improved chip control and surface finishing through geometry The DW chipbreaker is engineered for controlled chip formation in a range of materials, minimising clogging and enabling steady evacuation. The insert’s cylindrical hole with a single-sided countersink (40°–60°) provides secure seating in the drill pocket and supports efficient coolant delivery. The defined corner radius 1.2 mm and relief angle 11° help maintain a sharp cutting edge while distributing cutting forces, which contributes to a better surface finish and reduced tendency for edge chipping in interrupted cuts. Practical advantages that raise workshop productivity Indexable inserts like this one reduce tool change times and inventory complexity compared with solid drills. The geometry and grade selection—a fracture-resistant carbide tailored for drilling—are particularly useful where a sharp cutting edge and process stability are required. The TungDrillTwisted concept supports economical machining through predictable wear behaviour, while the standardised insert fitment keeps maintenance straightforward and repeatable across different machines and setups. For stable, high-quality drilling results, ask Metav Werkzeuge about specifying the Tungaloy XPMT110412R-DW AH7030 insert for the TungDrillTwisted system or request cutting parameters tailored to the workpiece material and machine setup Technical data Article number: 6970298 Manufacturer SKU: TUN6970298 Label: XPMT110412R-DW AH7030 Model series: TungDrillTwisted Application: Drilling Data Corner radius: 1.2 mm Relief angle: 11° Plate size: 11 mm ISO code: 110412 Manufacturer article number: 6970298 Special features Material: Carbide Coating/grade: PVD-coated AH7030 Chipbreaker: DW Hole style: Cylindrical hole + single-sided countersink (40°–60°) Plate form: Special System composition: TDX/C-TDX bodies, XPMT inserts, clamping screws and key FAQ What materials is this insert suitable for? The AH7030 PVD-coated carbide grade is designed for general drilling applications; the insert performs well where a wear-resistant, fracture-resistant edge is needed and is suitable for a broad material range as specified for the TungDrillTwisted system. How does the DW chipbreaker benefit drilling performance? The DW chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip clogging and improving machining stability when using the TDX-bodied drilling system. Which drill bodies accept this insert? This insert is intended for use with TDX/C-TDX indexable drill bodies within the TungDrillTwisted family, allowing selection by overhang (L/D) and machine interface to match the application. What do the corner radius and relief angle mean for hole quality? A corner radius of 1.2 mm and a relief angle of 11° support edge strength and reduce chipping; these geometrical parameters help deliver a finer surface finish and longer edge life under typical drilling conditions. Is the insert supplied complete with screws and accessories? The system comprises the TDX bodies, XPMT inserts, clamping screws and the assembly key; individual supply depends on the order configuration and should be confirmed with Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH7030 Wendeplatten - Tungaloy
XPMT 110412 AH7030 Wendeschneidplatte für Bohren – Tungaloy Die XPMT 110412 AH7030 ist eine PVD-beschichtete Wendeschneidplatte, entwickelt für präzises und prozesssicheres Bohren im Wechselplatten-Vollbohrsystem. PVD-beschichtetes Hartmetall AH7030 für lange Standzeit Optimiert für TDX-Bohrkörper und stabile Spanbildung DS-Spanbrecher für kontrollierten Spanfluss Zylindrisches Loch mit einseitiger Senkung 40°–60° Eckradius 1.2 mm und FreiWinkel 11° Produktivität steigern durch Prozessstabilität Mit der XPMT-Serie steht eine Wendeschneidplatte zur Verfügung, die Prozessstabilität und Produktivität verbindet. Die Kombination aus PVD-beschichtung und einem scharfen Schneidrand sorgt für konstante Zerspanungsergebnisse, geringere Nacharbeit und längere Standzeiten. Anwender profitieren von weniger Rüstzyklen und höherer Maschinenlaufzeit, was die Wirtschaftlichkeit in der Fertigung spürbar erhöht. Material- und Beschichtungswahl erklärt Die Sorte AH7030 ist ein PVD-beschichtetes Hartmetall, das Verschleiß- und Ausbruchsicherheit bietet. PVD steht für Physikalische Dampfabscheidung und erzeugt eine dünne, harte Schicht, die die Schneidkante schützt und die Wärmeableitung verbessert. Für Anwender ohne tiefes Fachwissen bedeutet das: längere Einsatzzeiten, sichere Schnittkanten und zuverlässige Bearbeitung auch bei anspruchsvollen Werkstoffen. Systemkompatibilität und Anwendungshinweise Die Platte ist für das TungDrillTwisted Wechselplatten-Vollbohrsystem konzipiert und harmoniert mit TDX- bzw. C-TDX-Bohrkörpern sowie standardisierten Spannschrauben. Bei der Auswahl von Durchmesser, L/D-Verhältnis, Schaft und Kühlung sollten Maschine, Werkstoff und gewünschte Oberflächenqualität berücksichtigt werden. Eine korrekte Abstimmung erhöht die Schnitt-Performance und reduziert Werkzeugkosten. Geometrie und Spanmanagement als Praxisvorteil Die Geometrie mit Eckradius 1.2 mm, FreiWinkel 11° und dem DS-Spanbrecher ermöglicht kontrollierten Spanfluss und reduziert Aufbauschneiden. Das zylindrische Loch mit einseitiger Senkung 40°–60° unterstützt sichere Spannverhältnisse auf dem Bohrkörper. Diese Merkmale erleichtern die Prozessführung und minimieren das Risiko von Ausbrüchen bei instabilen Schnittbedingungen. Empfehlung: Für produktives und sicheres Bohren die Wendeschneidplatte XPMT 110412 AH7030 wählen und direkt über Metav Werkzeuge anfragen; technische Rückfragen per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 klären Produktmerkmale Artikelnummer: 6970277 Marke: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT110412R-DS AH7030 Hersteller SKU: TUN6970277 Daten Eckradius: 1.2 mm FreiWinkel: 11° Plattengröße: 11 ISO-Bezeichnung: 110412 Besonderheiten Material: Hartmetall Beschichtung: AH7030 Schneidstofftyp: PVD-beschichtetes Hartmetall Spanbrecher: DS Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Anwendung: Bohren Modellserie: TungDrillTwisted Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel FAQ Wie unterscheidet sich AH7030 von anderen Sorten? AH7030 ist eine PVD-beschichtete Hartmetallsorte mit Fokus auf Verschleiß- und Ausbruchsbeständigkeit; die XPMT 110412 AH7030 bietet dadurch längere Standzeiten und stabile Schneidkanten gegenüber unbeschichteten Alternativen. Für welche Bohrkörper ist die Platte geeignet? Die Wendeschneidplatte XPMT110412R-DS passt zu TDX- und C-TDX-Bohrkörpern im TungDrillTwisted-System und ist Teil eines modularen Wechselplatten-Vollbohrsystems. Welche Vorteile bietet der DS-Spanbrecher? Der DS-Spanbrecher sorgt für kontrollierten Spanfluss, reduziert Aufbauschneiden und verbessert die Oberflächengüte bei der Bearbeitung unterschiedlicher Werkstoffe. Ist die Platte für rostfreien Stahl geeignet? Die PVD-beschichtete Hartmetallkombination und die Geometrie der XPMT 110412 AH7030 unterstützen auch die Bearbeitung von rostfreiem Stahl unter passender Prozessauslegung. Welche Rolle spielt das zylindrische Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung 40°–60° gewährleistet sicheren Sitz auf dem Bohrkörper und erleichtert die Montage mit standardisierten Spannschrauben. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 110412 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 for broad material coverage, the 11° relief angle for stable cutting, and the 1.2 mm corner radius for extended tool life — all optimised for secure, productive drilling. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. XPMT110412R-DW AH725 – Indexable insert for drilling, PVD-coated carbide, 1.2 mm corner radius | Tungaloy A robust indexable insert, the XPMT110412R-DW AH725 is intended for the TungDrillTwisted full-bodied insert drilling system and engineered for general-purpose drilling where process security and versatility are required. PVD-coated carbide AH725 grade 11° relief for stable cutting 1.2 mm corner radius for durability Cylindrical hole and 40°–60° countersink Reliable performance through optimised grade and coating The AH725 grade is a PVD-coated carbide designed for universal performance and stable chip formation when machining a range of materials, notably Stahl and rostfreier Stahl. The coating supports consistent cutting-edge behaviour and helps reduce notch wear, which contributes to fewer tool changes and more predictable cycle times. For production environments that demand repeatability, this combination reduces downtime and improves throughput without sacrificing surface quality. Stable geometry for secure, efficient drilling A relief angle of 11° combined with a 1.2 mm corner radius delivers a balance between cutting strength and edge robustness. The geometry minimises edge chipping under interrupted cuts and supports longer tool life in serial operations. The DW chipbreaker further controls chip formation, lowering the risk of re-cutting and enhancing coolant access. Together these features translate into greater process reliability and predictable tool costs per part. System compatibility and application focus Designed as part of the TungDrillTwisted family, the insert integrates into a system comprising TDX/C-TDX bodies, insert clamps and fixing screws. The cylindrical hole with a single-side countersink (40°–60°) ensures secure seating and accurate repeatability in the clamping interface. Selection of diameter, L/D ratio and shank should be matched to machine capability, component geometry and coolant method to fully exploit the insert’s potential in general drilling tasks. Practical benefits for workshop and production planning Using this insert supports faster setup and consistent reconditioning intervals thanks to its predictable wear characteristics. The PVD coating and grade choice make it suitable for mixed-material batches and smaller-diameter tooling where process safety is paramount. Where surface finish and stable production are priorities, the insert lowers scrap risk and contributes to overall cost-efficiency through longer service intervals. For tailored advice on integrating the Tungaloy XPMT110412R-DW AH725 into existing tooling systems or selecting the correct TungDrillTwisted body and fixation, contact Metav Werkzeuge for application-specific recommendations and availability. Technical data Article number: 6861422 SKU (manufacturer): TUN6861422 Item label: XPMT110412R-DW AH725 Series: TungDrillTwisted Material: carbide Application: Drilling Insert type: XPMT110412R-DW Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Relief angle: 11° Insert size: 11 SKU: 6861422-Tungaloy Special features PVD-coated AH725 grade DW chipbreaker Cylindrical hole with single-side countersink (40°–60°) Designed for TungDrillTwisted full-bodied insert drilling system Universal, breakout-resistant grade for Stahl and rostfreier Stahl System components: TDX/C-TDX bodies, XPMT inserts, clamping screws FAQ What materials is this insert suitable for? The AH725 grade insert is formulated for broad coverage and is suitable for machining Stahl and rostfreier Stahl, offering stable chip formation and consistent edge life. How does the DW chipbreaker affect drilling performance? The DW chipbreaker controls chip shape and evacuation, reducing re-cutting and improving coolant access; this enhances process reliability when using the TungDrillTwisted system. Is the insert compatible with existing TungDrillTwisted bodies? Yes, the XPMT110412R-DW is intended for use with TDX and C-TDX bodies; ensure the chosen body matches the required diameter, L/D ratio and clamping interface. What is the benefit of the 1.2 mm corner radius? A 1.2 mm radius increases edge strength and resistance to chipping, which supports longer tool life under intermittent cutting conditions and in production runs. Are there special considerations for coolant or machine setup? Optimal performance requires matching the insert and TungDrillTwisted body to machine rigidity, coolant delivery and chosen L/D; correct setup maximises stability and tool life. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
XPMT 110412 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide, secure clamping and a 1.2 mm corner radius for consistent, process-stable drilling results; ideal for mixed-material production and smaller-diameter tools. Order the inserts directly via Metav Werkzeuge or contact the consultants for sizing and integration support. XPMT110412 AH725 indexable insert for drilling — PVD-coated carbide, 1.2 mm radius (Tungaloy) The XPMT110412 AH725 is an indexable insert intended for use in the TungDrillTwisted family with TDX drill bodies, optimised for general drilling in Stahl and rostfreier Stahl and offering reliable chip control and repeatable seating in the drill head. XPMT110412 indexable insert AH725 PVD-coated carbide for Stahl and rostfreier Stahl Compatible with TDX drill bodies and TungDrillTwisted One-sided chipbreaker; cylindrical hole and countersink Stable machining where material mix matters The AH725 grade is a PVD-coated carbide developed for universal performance and stable chip formation across a broad material range. In practice this means consistent hole quality when switching between Stahl and rostfreier Stahl, and improved resistance to edge chipping in smaller tools. The one-sided chipbreaker promotes predictable chip flow, reducing the risk of nesting and helping to maintain cycle times. For shops that require process security rather than aggressive optimisation, this geometry and coating combination reduces unexpected tool changes and contributes to steady production output. Geometry that secures accuracy and service life The insert’s 1.2 mm corner radius and relief angle of 11° are designed to balance cutting strength with dimensional control. A larger corner radius increases edge stability during entry and exit, which improves hole roundness and surface finish without sacrificing tool life. The cylindrical hole with single-sided countersink (40°–60°) ensures reliable clamping in TDX bodies and minimizes movement under cutting forces. By translating geometry into tangible benefits—fewer rejects and longer intervals between indexings—this insert supports predictable productivity improvements on the shop floor. System-level benefits for drilling deployment This indexable solution is part of the TungDrillTwisted system: TDX/C-TDX drill bodies, XPMT inserts, fastening screws and keys work together for straightforward assembly and inventory management. Selection of diameter, L/D, shank and insert grade should match machine capability and coolant strategy; when configured correctly, the system reduces set-up time and eases spare-part planning. The combination of a PVD-coated AH725 insert with compatible drill bodies enables a pragmatic approach to tooling: maintain a compact toolstock while covering a wide range of drilling tasks with repeatable results. For tailored selection of XPMT110412 AH725 inserts and to integrate them into existing TungDrillTwisted tooling, contact Metav Werkzeuge for application advice and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6861362 SKU: 6861362-Tungaloy Manufacturer SKU: TUN6861362 Model series: TungDrillTwisted Application: Drilling Material: Carbide Core data ISO designation: 110412 Insert designation: XPMT110412 Corner radius: 1.2 mm Relief angle: 11° Plate size: 11 Hole style: with hole Special features Coating: AH725 (PVD) Chipbreaker: one-sided Plate form: special Hole style detail: cylindrical hole + single-sided countersink (40°–60°) System compatibility: TDX/C-TDX drill bodies FAQ What materials is this insert suitable for? The XPMT110412 AH725 insert is specified for machining Stahl and rostfreier Stahl and performs well where mixed materials are encountered. Is the insert compatible with standard TDX drill bodies? Yes, the insert is designed for the TungDrillTwisted family and fits TDX/C-TDX drill bodies when using the appropriate clamping screws. How does the AH725 coating affect tool life? The AH725 PVD coating improves edge protection and wear resistance, extending tool life and supporting stable chip formation under varying conditions. What does the cylindrical hole and countersink provide? The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in the seat, reducing movement and ensuring repeatable positioning during drilling. Can this insert be used for smaller-diameter drilling operations? Yes, the grade and geometry are chosen to perform well in smaller tools where process security and breakout resistance are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH725 Wendeplatten - Tungaloy
Combine the process security of the AH725 grade with the modular flexibility of the TungDrillTwisted TDX bodies to achieve consistent results when drilling steels and stainless steels; the PVD-coated cemented carbide insert ensures reliable chip control and stable cutting in mixed-material production. Order the XPMT110412R-DS directly via Metav Werkzeuge or consult our specialists for application guidance. XPMT 110412 AH725 (XPMT110412R-DS) – Indexable insert for drilling, TungDrillTwisted by Tungaloy A robust XPMT110412R-DS indexable insert developed for full-bore, modular drilling systems; ideal for general drilling tasks where process stability and insert interchangeability are required PVD-coated carbide grade AH725 for process security Designed for TungDrillTwisted TDX modular bodies Special form insert with cylindrical hole and countersink Universal, breakout-resistant for steel and stainless steels Reliable process security for mixed-material production The PVD-coated AH725 cemented carbide delivers a balance of wear resistance and toughness that supports stable chip formation across a wide range of steels and stainless steels. In combination with the insert’s DS chipbreaker geometry, the cutting edge reduces the risk of insert breakouts and ensures repeatable hole quality even when workpiece materials vary. The TDX modular concept permits selection of the appropriate body, shaft and L/D ratio so that the system can be tailored to machine capability and coolant strategy, supporting higher productivity and lower scrap rates. Faster tool setup and adaptable drilling configurations Modularity is at the heart of the TungDrillTwisted family: the system uses TDX/C‑TDX drill bodies with XPMT indexable inserts, clamping screws and a single key for straightforward assembly. This modular approach shortens changeover times and simplifies inventory management. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seating in the drill body, while the defined corner radius and relief angle support consistent cutting conditions across varying diameters and L/D demands. Improved tool life and consistent surface finish The combination of a PVD-coated surface and a breakout‑resistant grade reduces flank wear and chipping under interrupted cuts or inconsistent material batches, extending the usable lifetime of each indexable element. As a result, the drilling process becomes more predictable and achieves better surface finishes with fewer rework operations. For smaller tools and applications where process reliability is critical, the AH725 grade offers a cost‑effective compromise between edge stability and wear resistance. Clear selection criteria and practical application tips When choosing an insert and drill body combination, match insert size, corner radius (R = 1.2 mm) and relief angle (11°) to the desired hole size and machine rigidity. For applications requiring reliable chip evacuation and stable cutting, select the DS chipbreaker form and ensure the TDX body variant suits the intended L/D ratio. The special insert form and the presence of a cylindrical hole with countersink facilitate accurate indexation and secure fastening in the drill body, minimising vibration and promoting process consistency. Contact Metav Werkzeuge for tailored drilling recommendations and to order Tungaloy XPMT110412R-DS inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861390 SKU: 6861390-Tungaloy Manufacturer SKU: TUN6861390 Model series: TungDrillTwisted Brand: Tungaloy Core data Corner radius: 1.2 mm Relief angle: 11° ISO designation: 110412 Insert size: 11 Countersink angle: 40–60° Special features Material: cemented carbide Coating: AH725 (PVD‑coated) Insert designation: XPMT110412R-DS Insert form: special Chipbreaker: DS Hole: cylindrical hole with single‑side countersink System components: TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and key Typical application: drilling FAQ What materials is this insert suited for? The XPMT110412R-DS insert in AH725 is designed primarily for steels and stainless steels, offering universal, breakout‑resistant performance across mixed batches. How does the AH725 coating improve drilling performance? The PVD‑coated AH725 grade increases surface hardness and wear resistance while retaining edge toughness, which supports stable chip formation and longer insert life in drilling operations. Which drill bodies are compatible with this insert? The insert is intended for use with TungDrillTwisted TDX and C‑TDX drill bodies as part of a modular full‑bore system; secure clamping is achieved via the cylindrical hole and countersink arrangement. What does the DS chipbreaker provide? The DS chipbreaker is configured to promote controlled chip breakage and evacuation, reducing the likelihood of chip entanglement and improving hole quality. How should the insert be selected for a specific L/D ratio? Select the appropriate TungDrillTwisted body variant to match the required L/D; then choose the XPMT insert size and corner radius that correspond to the hole diameter and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 110412 AH9030 Wendeplatten - Tungaloy
XPMT 110412 AH9030 Wendeplatte von Tungaloy für Bohren XPMT 110412 AH9030 bietet verschleiß- und ausbruchfeste Performance für Wechselplatten-Vollbohrsysteme und ist für den Einsatz mit TDX-Bohrkörpern ausgelegt PVD-beschichtetes Hartmetall AH9030 Einseitiger Spanbrecher für stabile Spanbildung Eckenradius 1,2 mm für präzise Bohrkanten Freiwinkel 11° für kontrollierten Schnitt Passend für TDX/C-TDX Wechselplatten-Bohrkörper Hohe Prozesssicherheit dank robuster Schneidkante Die XPMT 110412 AH9030 kombiniert eine scharfe Schneidkante mit der AH9030 Sorte, wodurch die Schnittkräfte kontrollierter ablaufen und die Standzeit steigt. Anwender profitieren von konstanter Bohrqualität und geringerer Ausfallrate, weil die PVD-Beschichtung die Verschleißbeständigkeit erhöht und Ausbrüche reduziert. Dieser Vorteil macht die Platte besonders geeignet für produktive Fertigungsprozesse, in denen reproduzierbare Resultate gefragt sind. Schneller Werkstückwechsel und Systemkompatibilität Die Wendeplatte ist Teil der TungDrillTwisted Modellserie und wurde für den Einsatz in TDX und C-TDX Bohrkörpern konstruiert. Der modulare Systemaufbau ermöglicht schnellen Austausch, einfache Lagerhaltung und reduzierte Maschinenstillstandzeiten. Wer auf Effizienz setzt, nutzt die standardisierte Schnittstelle, Spannschrauben und Schlüssel, um Rüstzeiten messbar zu verkürzen und die Prozesskosten zu senken. Sorte AH9030: weniger Verschleiß, mehr Prozessstabilität Die AH9030 Sorte ist eine PVD-beschichtete Hartmetallsorte, die speziell für Bohren entwickelt wurde und hohe Ausbruchfestigkeit bietet. Dadurch bleibt die Schneidkante länger scharf, was zu gleichmäßigem Spanabfluss und verbesserten Oberflächen führt. Für Anwender bedeutet das weniger Nacharbeit und eine bessere Planbarkeit der Werkzeugstandzeiten bei variierenden Werkstoffen. Zielgerichteter Einsatz und Anwendernutzen Konzipiert für allgemeines Bohren, eignet sich die XPMT 110412 AH9030 besonders, wenn Prozesssicherheit und eine scharfe Schneidkante gefordert sind. Die Platte unterstützt Anwender in Serienfertigung ebenso wie in Werkstätten mit wechselnden Aufgaben, weil sie durch ihre Konstruktion und den einseitigen Spanbrecher zuverlässige Spanbildung garantiert. Die spezielle Plattenform und das zylindrische Loch mit einseitiger Senkung erleichtern den Einbau und die Spannlage. Empfohlen: Für prozesssichere Bohraufgaben die XPMT 110412 AH9030 von Tungaloy verwenden; bei Fragen zur Einbaulage oder Schnittdaten gern Kontakt aufnehmen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6718254 Hersteller: Tungaloy Modellserie: TungDrillTwisted Hersteller SKU: TUN6718254 Fakten Eckenradius: 1.2 Freiwinkel: 11° Plattengröße: 11 Besonderheiten Material: Hartmetall Sorte: AH9030 Schneidstofftyp: PVD-beschichtetes Hartmetall Plattenform: Sonder Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel FAQ Welche Anwendungen deckt die XPMT 110412 AH9030 ab? Die XPMT 110412 AH9030 von Tungaloy ist für allgemeines Bohren konzipiert und bringt ihre Stärken bei Aufgaben mit hoher Prozessanforderung zur Geltung, insbesondere dort, wo verschleiß- und ausbruchfeste Schneidkanten notwendig sind. Mit welchen Bohrkörpern ist die Platte kompatibel? Die Platte wurde für den Einsatz in TDX und C-TDX Bohrkörpern der TungDrillTwisted Modellserie entwickelt und ist Teil des modularen Wechselplatten-Vollbohrsystems. Was zeichnet die AH9030 Sorte aus? AH9030 ist eine PVD-beschichtete Hartmetallsorte, die hohe Verschleißfestigkeit und Ausbruchresistenz bietet, sodass Schneidkanten länger erhalten bleiben und Prozesse stabiler laufen. Wie beeinflusst der Eckenradius das Bohrergebnis? Der Eckenradius von 1,2 mm sorgt für präzise Bohrkanten und eine gleichmäßigere Schnittkante, was die Oberflächenqualität verbessert und die Wiederholgenauigkeit in Serienprozessen unterstützt. Welche Rolle spielt der einseitige Spanbrecher? Der einseitige Spanbrecher fördert stabile Spanbildung und verringert das Risiko von Spanaufbau, wodurch die Sicherheit des Zerspanprozesses und die Standzeit verbessert werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 150512 AH6030 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6030), secure clamping via a cylindrical hole with one-sided countersink, and a robust 1.2 mm corner radius for reliable full-bodied drilling. Order the insert or consult Metav Werkzeuge for application matching and tool pairing. XPMT150512R-DW AH6030 (XPMT 150512) indexable insert for TDX full-bodied drilling system — Tungaloy The XPMT150512R-DW AH6030 is an indexable carbide insert developed for full-bodied drilling with TDX drill bodies, optimised for process security where a sharp cutting edge and wear resistance are required. PVD-coated carbide grade AH6030 Robust 1.2 mm corner radius for stability DW chipbreaker for controlled chips Cylindrical hole with one-sided countersink Greater process stability through a wear-resistant grade The AH6030 grade, supplied as a PVD-coated carbide insert, is engineered for wear and chip resistance, which leads to fewer interruptions and more consistent cycle times in production environments. The coated surface stabilises the cutting edge at elevated temperatures and reduces adhesive wear on the rake face; this translates into more reliable performance during continuous drilling operations. By combining a sharp edge geometry with a wear-oriented grade, the insert offers a balance between cutting precision and longevity, helping to lower tool-change frequency and maintain dimensional consistency in series manufacture. Secure clamping and reliable chip control for practical productivity The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable clamping and accurate seat positioning in the TDX-style drill body, reducing the risk of micro-movements under load. The DW chipbreaker is designed to promote controlled chip formation across a range of cutting conditions, simplifying chip evacuation and protecting the cutting edge from unpredictable chip loading. Together, these design elements contribute to steady drilling performance and minimise process variability when paired with the appropriate drill body and coolant strategy. Geometry tuned for edge strength and surface quality A 1.2 mm corner radius increases edge toughness and reduces the likelihood of chipping on interrupted or difficult-to-cut surfaces, while the specified relief angle (11°) allows a sharp engagement with the workpiece without compromising stability. These geometric choices support improved surface finish and dimensional control in components where consistent bore geometry is essential. The insert’s special plate form and precise dimensions make it suitable for selection across the TungDrillTwisted family, enabling practical matching of diameter, L/D ratio and shank interface for the machine and material in use. System compatibility and selection guidance for machining tasks The insert is part of a TungDrillTwisted indexable full-bodied drilling system that uses TDX/C-TDX drill bodies and XPMT plates; selection should consider the machine spindle, coolant availability and workpiece material. The carbide construction and AH6030 coating make the insert appropriate where a sharp cutting edge and process security are priorities. For best results, match the plate size and chipbreaker to the chosen feed and speed ranges and verify clamping with the recommended TDX clamping screws. If there is uncertainty about the correct combination, application data such as material group and L/D ratio should be supplied for precise advice. Contact Metav Werkzeuge for tailored application advice, matching of the TDX drill body and inserts, or to place an order — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6718276 Manufacturer SKU: TUN6718276 Label: XPMT150512R-DW AH6030 Model series: TungDrillTwisted Core data ISO code: 150512 Corner radius: 1.2 mm Relief angle: 11° Plate size: 15 Design & special features Coating / grade: AH6030 (PVD-coated carbide) Chipbreaker: DW Plate form: Special Hole style: Cylindrical hole + one-sided countersink (40°–60°) Compatible system: TDX / C-TDX drill bodies, XPMT plates FAQ What materials is this insert suitable for? The AH6030 PVD-coated carbide insert is designed for general drilling applications where a sharp cutting edge and process security are required; material suitability depends on workpiece composition and cutting data, so the Tungaloy XPMT150512R-DW AH6030 is typically chosen for a broad range of steels and mixed material batches. How does the DW chipbreaker influence machining? The DW chipbreaker on the XPMT plate promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related edge damage during full-bodied drilling with TDX drill bodies. Why is the cylindrical hole with countersink important? The cylindrical hole plus one-sided countersink ensures repeatable seat location and secure clamping in the TDX system, which reduces micro-movement and contributes to consistent bore accuracy and tool life. Which aspects should be checked when matching the insert to a drill body? Verify the TDX interface, plate size and the L/D ratio of the drill body, and ensure clamp screws and coolant delivery are compatible; reference the model family TungDrillTwisted and the SKU 6718276-Tungaloy when requesting detailed matching information. How does the 1.2 mm corner radius affect performance? A 1.2 mm radius increases edge strength and resistance to chipping, especially on interrupted cuts, and supports improved dimensional stability and surface integrity during series drilling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH6030 Wendeplatten - Tungaloy
Combining process security, long tool life and precise chip control, this indexable insert supports productive drilling cycles; order originals via Metav Werkzeuge or consult our specialists for machine-specific selection. XPMT 150512 AH6030 indexable insert for general drilling, PVD-coated carbide by Tungaloy XPMT150512R-DJ AH6030 is an indexable drill insert designed for use in full-drill systems with TDX bodies, suited to general drilling where a sharp cutting edge and high process security are required XPMT insert for TDX drill bodies PVD-coated AH6030 grade for wear resistance 1.2 mm corner radius for reliable cutting Cylindrical hole with 40°–60° countersink Stable production through proven cutting performance The XPMT150512R-DJ insert is part of the TungDrillTwisted family and delivers consistent results in repetitive drilling operations. The PVD-coated AH6030 grade provides a balance between edge sharpness and resistance to wear and chipping, which translates into fewer tool changes and steadier cycle times. By combining a controlled cutting geometry with a robust substrate, the insert reduces the risk of premature edge failure and supports predictable throughput in production environments. Material and coating engineered to extend tool life A carbide substrate with a PVD surface finish enables the insert to withstand abrasive and intermittent cutting conditions commonly encountered in general drilling. The coating improves heat resistance and lowers flank wear, while the substrate ensures structural support for the cutting edge. This combination results in measurable savings: longer intervals between indexings and reduced scrap due to degraded edges. For operations prioritising uptime and repeatability, the coated grade provides reliable performance under varied cutting speeds. Geometry and chip control that simplify machining The insert’s 1.2 mm corner radius and DJ chipbreaker are configured to promote stable chip formation and evacuation in through-hole drilling. The plate design with a cylindrical hole and a single-sided countersink (40°–60°) assists secure clamping in TDX bodies and helps maintain repeatable seat positions. These design elements reduce the need for manual intervention during tool changes and ease process parameter development on new components, contributing to faster setup and less machine downtime. Practical compatibility and selection guidance Designed for integration with TDX/C-TDX drill bodies, the insert family offers flexibility through variants in overhang length, L/D ratio and interface type. Selection should match the machine spindle, coolant supply and workpiece material; the AH6030 grade suits applications where a sharp cutting edge and process stability are required. For customers seeking guidance on matching insert size, L/D and holder interface, technical advice is available to ensure the right combination for the intended operating window. For availability of original Tungaloy inserts and tailored application advice, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 and request assistance with the TUN6718262 insert Technical data Article number: 6718262 Manufacturer SKU: TUN6718262 SKU: 6718262-Tungaloy Model series: TungDrillTwisted ISO designation: 150512 Insert designation: XPMT150512R-DJ Core specifications Corner radius: 1.2 mm Clearance (free) angle: 11° Plate size: 15 Hole: with hole, cylindrical + single-sided countersink (40°–60°) Design & special features Coating/grade: AH6030 (PVD-coated carbide) Chipbreaker type: DJ Plate form: Special System: Indexable full-drill system for TDX/C-TDX drill bodies Typical components supplied: inserts, clamp screws, keys (system components) FAQ What materials are suitable for machining with this insert? The XPMT150512R-DJ AH6030 indexable insert is optimised for general drilling applications where a sharp cutting edge and process security are required; the PVD-coated carbide grade performs well across a broad range of steels and common engineering materials. Which drill bodies are compatible with this insert? This insert is intended for use in TDX/C-TDX drill bodies as part of the TungDrillTwisted system, ensuring secure seating and repeatable performance when assembled correctly. What does the AH6030 grade offer compared with other grades? AH6030 is a PVD-coated carbide grade designed for wear and chipping resistance while maintaining a sharp edge; in practice this yields longer tool life and improved process stability compared with uncoated or softer grades. How does the 1.2 mm corner radius affect drilling results? A 1.2 mm corner radius provides a compromise between edge strength and hole finish, improving resistance to chipping during entry while contributing to consistent hole geometry throughout the drilling cycle. What is the SKU for ordering the original insert? The original Tungaloy insert is listed as SKU 6718262-Tungaloy (manufacturer SKU TUN6718262) and can be referenced when enquiring about availability and compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH7020 Wendeplatten - Tungaloy
Take advantage of the proven combination of AH7020 PVD-coated carbide and an optimised DJ chipbreaker for secure chip control and long edge life; order matching TungDrillTwisted components through Metav Werkzeuge or consult the team for application-specific configuration. XPMT 150512 AH7020 — Indexable insert for drilling (Tungaloy) The XPMT150512R-DJ AH7020 is an indexable insert developed for the TungDrillTwisted full-drill system, designed for general drilling where edge stability and consistent process reliability are required. XPMT insert AH7020 PVD-coated carbide Optimised DJ chipbreaker for secure chip control Cylindrical hole with single-side countersink 1.2 mm corner radius for robust cutting edge High process reliability from advanced grade and coating The combination of a PVD-coated carbide base and the AH7020 grade delivers a balance of wear resistance and fracture toughness that supports stable cutting edges during drilling. This is particularly relevant in mixed-production environments where a single insert must cope with varying workpiece materials. The PVD layer reduces flank wear while maintaining a sharp cutting line, which in turn helps to prolong tool life and reduce unplanned tool changes. For operators and production engineers, this translates into fewer interruptions and a more predictable machining cycle. Geometry engineered for consistent chip control and edge life A 1.2 mm corner radius combined with an 11° clearance angle provides mechanical strength at the cutting edge while still permitting efficient penetration at the start of the cut. The DJ chipbreaker is engineered to control chip form in moderate cutting conditions, lowering the risk of chip jamming and improving evacuation through the flute. The insert’s cylindrical hole with a single-side countersink (40°–60°) secures positive clamping in the TDX pocket and supports repeatable seating, which reduces micro-movements and contributes to consistent surface finish and dimensional stability. System compatibility and straightforward application selection Designed for the TungDrillTwisted family, this insert integrates into TDX/ C-TDX drill bodies with standard clamping hardware. Selection should consider the desired diameter, L/D ratio and machine capabilities; matching the XPMT150512R-DJ insert to the correct body and coolant strategy ensures optimal chip evacuation and thermal management. The system approach—bodies, XPMT inserts, clamping screws and keys—facilitates fast replacement and minimal setup times. For production planners, the modular design reduces tool inventory complexity while maintaining flexibility across drilling tasks. For reliable drilling performance with Tungaloy AH7020 inserts and to ensure correct TungDrillTwisted configuration, contact Metav Werkzeuge for an application review and component matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 7755714-Tungaloy Manufacturer SKU: TUN7755714 Manufacturer article number: 7755714 Model series: TungDrillTwisted Insert designation: XPMT150512R-DJ Grade/coating: AH7020 (PVD) Facts Corner radius: 1.2 mm Clearance angle: 11° Insert size: 15 ISO code: 150512 Special features Material: carbide (cemented carbide) Chipbreaker: DJ Hole: cylindrical hole with single-side countersink (40°–60°) Plate form: special Application: drilling System components: TDX/C-TDX drill bodies, XPMT inserts, clamping screws and key FAQ What materials can this insert machine effectively? The XPMT150512R-DJ AH7020 insert is formulated for general drilling and provides good performance across a broad material mix thanks to the AH7020 grade and PVD coating. How does the DJ chipbreaker benefit production? The DJ chipbreaker promotes consistent chip form and evacuation, reducing the likelihood of chip entanglement and supporting uninterrupted drilling cycles with the TungDrillTwisted system. Is the insert compatible with existing TDX drill bodies? Yes. The insert is designed for use in TDX and C-TDX bodies; correct seating is ensured by the cylindrical hole and single-side countersink interface. What does the 1.2 mm corner radius mean for tool life? A 1.2 mm corner radius increases the mechanical robustness of the cutting edge, improving resistance to chipping and extending the serviceable life of the insert under typical drilling conditions. Are replacement inserts and clamping hardware available separately? Replacement XPMT inserts and the required clamping screws and key are available as part of the TungDrillTwisted system supply; consult Metav Werkzeuge for matching components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH7020 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade optimised for wear and breakout resistance and the modular TungDrillTwisted system for reliable, repeatable drilling cycles. Order the suitable configuration through Metav Werkzeuge or consult our technical advisers for matching TDX bodies, insert geometry and coolant strategy. XPMT 150512 AH7020 indexable insert for drilling — Tungaloy XPMT150512R-DS AH7020 is an indexable insert designed for general drilling in modular TDX drill systems, combining a sharp, wear-resistant cutting edge with a controlled DS chip‑forming geometry. *PVD-coated carbide grade AH7020 for wear resistance *Optimised DS chipbreaker for controlled chips *Designed for TDX drill bodies and indexable drilling *Cylindrical hole with one-sided countersink (40°–60°) Increased process reliability from a wear‑resistant grade The PVD‑coated AH7020 carbide delivers wear resistance and improved edge stability for demanding drilling operations. Its composition targets a balance between hardness and fracture toughness, which reduces premature tool failure and supports longer tool life in general drilling tasks. As a result, machining cycles run with fewer interruptions and tool-change events, improving overall productivity and lowering machining costs per hole. Predictable chip control and consistent hole quality The DS chipbreaker is engineered to produce short, controllable chips even in mixed materials, which reduces the risk of chip entanglement and stabilises the drilling process. Combined with a 1.2 mm corner radius and an 11° clearance angle, the insert promotes steady cutting forces and consistent surface finish in through‑hole and blind‑hole applications. The cylindrical hole with a one‑sided countersink (40°–60°) supports secure clamping and reliable coolant delivery for stable thermal conditions. Modular system design for fast integration and flexible production Built for the TungDrillTwisted family, the insert integrates into TDX/C‑TDX drill bodies with standard clamping screws and keys, enabling rapid reconfiguration according to L/D, shank type and machine capability. The system approach reduces setup complexity and allows matching of insert geometry and coolant strategy to specific materials and machines. For complex specifications or material mixes, technical advice is available via email or phone to assist with selection and process parameters. For tailored drilling solutions using Tungaloy TungDrillTwisted inserts, contact Metav Werkzeuge to identify the optimal TDX configuration and insert grade; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6970309 Manufacturer SKU: TUN6970309 SKU: 6970309-Tungaloy Label: XPMT150512R-DS AH7020 Facts Corner radius: 1.2 mm Clearance angle: 11° Plate size: 15 ISO designation: 150512 Special features Grade/coating: AH7020 (PVD-coated carbide) Chipbreaker: DS Hole style: Cylindrical hole + one-sided countersink (40°–60°) Plate form: Special Model series: TungDrillTwisted System: TDX/C-TDX bodies with XPMT inserts Application: Drilling FAQ What materials is this insert suitable for? The XPMT150512R-DS AH7020 insert is a PVD‑coated carbide grade designed for a broad range of drilling applications and offers reliable performance across common steels and mixed materials where a sharp, wear‑resistant cutting edge is required. How does the DS chipbreaker affect machining? The DS chipbreaker on the XPMT insert promotes controlled, short chips for safer chip evacuation and reduced risk of re-cutting; this contributes to more consistent hole quality and fewer process interruptions when used in TDX drill bodies. Which drill bodies are compatible with this insert? The insert is part of the TungDrillTwisted system and is compatible with TDX and C‑TDX drill bodies; the modular design uses standard clamping screws and keys for straightforward mounting and exchange. What geometric data should be considered for setup? Key geometry to consider includes the 1.2 mm corner radius, 11° clearance angle and the plate size 15; these parameters influence feed, cutting depth and achievable surface finish in the final hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH7020 Wendeplatten - Tungaloy
Robust PVD-coated AH7020 carbide and a DW chipbreaker provide secure chip control and a sharp cutting edge for repeatable drilling performance; combined with the TDX indexable drill body this reduces downtime and supports consistent, productive machining. Order the XPMT150512R-DW AH7020 directly via Metav Werkzeuge or contact the consultants for application matching. XPMT 150512 AH7020 — XPMT150512R-DW indexable drilling insert for TungDrillTwisted (Tungaloy) A versatile XPMT 150512 AH7020 indexable insert engineered for general drilling within the TungDrillTwisted full-drilling system, offering PVD-coated carbide durability and optimised chip control for stable, high-quality holes. PVD-coated AH7020 for wear resistance DW chipbreaker for controlled chips 1.2 mm corner radius for edge stability Compatible with TDX indexable drill bodies Secure process reliability through advanced coating and geometry The PVD-coated AH7020 grade provides a fine, wear-resistant surface that supports a sharp cutting edge and reduced flank wear, which translates into longer tool life and predictable component quality. The DW chipbreaker is designed to shape chips consistently, improving evacuation and lowering the risk of re-cutting. For users seeking process security, this combination reduces machining interruptions and helps maintain dimensional stability across production runs. Flexible system design for a range of drilling tasks Built for the TungDrillTwisted family, the insert forms part of a replaceable-insert full-drilling solution that separates the insert from the drill body (TDX/C-TDX). Selection of diameter, L/D ratio, shank style and the appropriate XPMT insert allows adaptation to machine capability, workpiece material and coolant strategy. The modular approach supports economical operations by limiting replacement to worn inserts rather than entire tools, improving uptime and lowering operational cost per hole. Geometry and fastening features that support repeatable accuracy The special plate form with cylindrical hole plus one-sided countersink (40°–60°) ensures secure seating and reliable clamping with the supplied screws. A 1.2 mm corner radius and an 11° relief angle contribute to a robust cutting edge that resists chipping during entry and exit, particularly in general drilling applications. The insert size (15 mm) and unique DW break geometry provide stable cutting behaviour and a consistent surface finish when matched to appropriate parameters and coolant. If clarification is required on suitability for a particular material or machining scenario, Metav Werkzeuge provides technical consultation. Technical drawing details, recommended cutting data and application notes are available on request via email or telephone: info@metav-werkzeuge.com / +49 2822 7131930. Contact Metav Werkzeuge to specify the XPMT 150512 AH7020 for the TungDrillTwisted system and secure optimised drilling results with professional application support. Technical Data Article number: 6970292 SKU: 6970292-Tungaloy Manufacturer SKU: TUN6970292 Model series: TungDrillTwisted Application: Drilling Facts ISO designation: 150512 Corner radius: 1.2 mm Plate size: 15 mm Relief (free) angle: 11° Special features Coating / grade: PVD-coated AH7020 Material: carbide Chipbreaker: DW Plate form: special Hole: cylindrical hole + one-sided countersink (40°–60°) System: XPMT inserts for TDX / C-TDX drill bodies Typical use: general drilling with indexable full-drilling system FAQ What materials is this insert suitable for? The XPMT150512R-DW AH7020 is a PVD-coated carbide grade designed for a broad range of general drilling tasks; suitability depends on cutting data and machine setup. How does the DW chipbreaker affect performance? The DW chipbreaker on the XPMT150512R-DW shapes chips for consistent evacuation, reducing chip-related interruptions and supporting steady drilling cycles. Can the insert be used in different TungDrillTwisted bodies? Yes, the XPMT150512R-DW insert is compatible with TDX and C-TDX indexable drill bodies within the TungDrillTwisted system when the insert size and interface match. What is the significance of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge robustness and reduces the likelihood of chipping at entry and exit, improving tool life and hole quality when machining variable conditions. Is the insert delivered with fastening hardware? The full system comprises TDX/C-TDX drill bodies, XPMT inserts, clamping screws and the required key; confirm scope of delivery when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH7030 Wendeplatten - Tungaloy
Combining a wear‑resistant PVD‑coated AH7030 grade with a 1.2 mm corner radius, the insert delivers stable chip formation and reliable cutting performance in general drilling applications; order the XPMT150512R-DS AH7030 directly via Metav Werkzeuge or ask our consultants if needed. XPMT150512R-DS AH7030 (XPMT 150512) — Indexable insert for drilling, PVD‑coated carbide, 1.2 mm radius (Tungaloy) The XPMT150512R-DS AH7030 is an indexable insert intended for general drilling within the TungDrillTwisted family, optimised for process security and consistent chip control when used with TDX drill bodies. PVD-coated carbide grade AH7030 1.2 mm corner radius for robust edge DS chipbreaker for stable chip control Cylindrical hole with single-sided countersink Reliable wear resistance for uninterrupted drilling The TungDrillTwisted concept pairs a proven insert geometry with a PVD‑coated AH7030 grade that is engineered for both wear and breakout resistance. The coating and substrate combination provides extended tool life in common drilling operations, meaning fewer index changes and less machine downtime. As a result, machining cycles remain more predictable and the process stability is improved, which supports consistent production flow and reduced scrappage. The description of the insert emphasises a balance between a sharp cutting edge and robust edge stability to maintain hole quality across varied steels and general workshop materials. Geometry that ensures hole quality and chip control Precision geometry—including a 1.2 mm corner radius and an 11° clearance angle—is designed to deliver repeatable hole profiles and surface finish. The DS chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip packing in deep holes; the insert’s cylindrical hole with single‑sided countersink (40°–60°) ensures secure clamping and correct seating in the drill body. These features together reduce vibrations and support consistent cutting forces, which is particularly beneficial when selecting overhangs and L/D ratios within the TungDrillTwisted family. A modular system for easy integration and inventory efficiency The system structure comprises TDX/C‑TDX drill bodies, the XPMT series of indexable inserts, clamping screws and the corresponding key, allowing straightforward assembly and interchangeability. The family is differentiated by overhang (L‑D) and interface, so bodies and inserts can be matched to machine capability, material and coolant strategy. Using standardised inserts such as this one simplifies stocking and speeds up set‑ups, while the special plate form and size 15 ensure compatibility with the intended drill carriers. This modular approach supports efficient workshop logistics and rapid adaptation to changing production demands. Practical advantages for process security and versatility Selected for general drilling tasks, the insert’s combination of carbide substrate and AH7030 coating supports a wide material range and consistent performance at moderate cutting data. The design reduces the likelihood of premature edge failure and eases reconditioning cycles. In applications where a reliable cutting edge and predictable chip behaviour are required, the insert contributes directly to improved throughput and lower process variability. The product is suitable for customers seeking a balance of economy and dependable machining results. Contact Metav Werkzeuge for application advice, availability and quick delivery information — Metav Werkzeuge GmbH: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6970283 Manufacturer SKU: TUN6970283 SKU: 6970283-Tungaloy Core data Corner radius: 1.2 mm Clearance angle: 11° Plate size: 15 ISO designation: 150512 Special features Grade/coating: AH7030 (PVD) Substrate: Hartmetall (carbide) Chipbreaker: DS Plate form: Sonder (special) Hole: cylindrical hole with single-sided countersink 40°–60° Series: TungDrillTwisted System components: TDX/C-TDX bodies, XPMT inserts, clamping screws and key FAQ What materials is this insert suited for? The XPMT150512R-DS AH7030 insert, with its PVD coating and carbide substrate, is aimed at general drilling tasks and performs well across a broad range of workshop materials where a sharp, wear‑resistant cutting edge is required. How does the DS chipbreaker affect drilling performance? The DS chipbreaker on this indexable insert promotes stable chip formation and evacuation, which reduces the risk of chip congestion and helps maintain consistent cutting forces during drilling cycles. Which drill bodies are compatible with these inserts? Inserts of this type are designed to be used with TDX and C‑TDX drill bodies within the TungDrillTwisted system; the full system includes clamping screws and the assembly key for secure mounting. What does the cylindrical hole with single‑sided countersink provide? The cylindrical hole plus a single‑sided countersink (40°–60°) ensures accurate seating and secure clamping in the drill body, helping to maintain repeatable positioning and improved coolant access when the system is assembled. How should overhang and L/D ratio be chosen for reliable operation? Selection of overhang and L/D should be based on machine rigidity, material and coolant conditions; the TungDrillTwisted family is differentiated by these ratios so that appropriate bodies and inserts can be combined to match the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH7030 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide, a robust corner radius R1.2, and a chipbreaker engineered for consistent chip formation to maintain stable drilling cycles and minimise rework; order original inserts or request advice directly from Metav Werkzeuge for an efficient tooling solution. XPMT 150512 AH7030 – XPMT indexable insert for drilling by Tungaloy, PVD-coated, R1.2 A XPMT150512R-DW AH7030 indexable insert developed for interchangeable full-bore drilling with TDX bodies, offering wear- and chipping-resistant performance for general drilling applications PVD-coated carbide AH7030 for wear resistance R1.2 corner radius for robust cutting edge DW chipbreaker for controlled chip formation Cylindrical hole with single-side countersink Greater process stability through optimised cutting edge and coating The combination of a PVD coating and the AH7030 cemented carbide grade ensures improved resistance to flank wear and edge chipping, which translates into longer tool life and fewer interruptions in production. The corner radius R1.2 is designed to strengthen the cutting edge while retaining the required profile for hole finishing; this balance reduces the risk of premature breakout and keeps tolerances consistent. When used in a TDX-compatible drilling body, the insert’s geometry supports repeatable engagement conditions, helping to lower cycle-time variability and maintain consistent hole size in mixed-batch production runs. Reliable chip control and predictable performance for safe machining Built with a DW chipbreaker, the insert provides controlled chip formation across a broad range of materials suitable for general drilling. Controlled chips reduce the likelihood of re-cutting and tool damage, which improves component surface quality and reduces machine downtime. The insert’s central hole with a cylindrical form and a single-side countersink (40°–60°) secures repeatable clamping in TDX systems, so the clamping force and position remain constant. This predictability is especially valuable where process security and repeatability are priorities during medium- to high-volume manufacturing. Flexible system integration to match machine, material and cooling The insert is part of the TungDrillTwisted family and is intended for use in TDX / C‑TDX drill bodies together with the specified clamping screws and key; this modular approach allows selection of diameter, L/D ratio and shank style to suit the machine and the job. Material versatility is achieved by the cutting grade and chipformer design, enabling productive drilling across common engineering materials encountered in general drilling tasks. As the system is modular, tooling inventory can be matched precisely to production needs, reducing tool-change times and simplifying stock management. For a tailored recommendation on the XPMT150512R-DW AH7030 inserts and compatible TDX drilling bodies, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and ordering support Technical data Article number: 6970299-Tungaloy Manufacturer SKU: TUN6970299 Manufacturer article number: 6970299 Model series: TungDrillTwisted Material: cemented carbide Insert designation: XPMT150512R-DW AH7030 Core data ISO code: 150512 Corner radius: R1.2 Relief (free) angle: 11° Plate size: 15 Countersink range: 40°–60° Special features PVD-coated cemented carbide grade AH7030 DW chipbreaker for controlled chips Cylindrical hole with single-side countersink Special plate form for interchangeable full-bore drilling Compatible with TDX / C‑TDX drill bodies; system includes clamping screws and key FAQ What materials can be machined with this insert? The XPMT150512R-DW AH7030 insert is a PVD-coated cemented carbide grade designed for general drilling and delivers broad material coverage; matching the cutting data to the workpiece material yields optimal performance. How is the insert secured in the drilling system? The insert is clamped in TDX-compatible drill bodies using the specified clamping screws and key; the cylindrical hole with a single-side countersink ensures stable seating and repeatable positioning. Does the AH7030 grade resist chipping during interrupted cuts? Yes, the AH7030 grade is formulated for wear and chip resistance in drilling applications, and the R1.2 corner radius increases edge robustness for interrupted or unstable cutting conditions. What benefit does the DW chipbreaker provide? The DW chipbreaker promotes consistent chip formation and evacuation, reducing the risk of entanglement and improving surface finish and process reliability when the insert is used in the designed drilling system. Is this insert compatible with other Tungaloy drilling bodies? The insert is part of the TungDrillTwisted family and is intended for TDX / C‑TDX bodies; compatibility should be confirmed against the specific body interface and L/D requirements for each application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH725 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH725 grade and the robust corner radius 1.2 mm for steady, repeatable drilling performance; the insert's universal, fracture-resistant design supports mixed-material production runs. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. XPMT150512 AH725 indexable insert for drilling (PVD-coated carbide) – Tungaloy XPMT150512 AH725 is an indexable insert for drilling within the TungDrillTwisted system, optimised for reliable material removal in general drilling applications. PVD-coated carbide AH725 Universal grade for steel and stainless Corner radius 1.2 mm for robustness Cylindrical hole with single-side countersink Consistent cutting with a universal, PVD-coated grade The AH725 grade is a PVD-coated carbide designed as a universal, fracture-resistant option for drilling across steel and stainless steels. Its composition and coating enhance wear resistance while maintaining edge stability during interrupted cuts. Integrated into the TungDrillTwisted family, the insert supports predictable tool life and reduced scrap rates by offering a balance between toughness and hardness suitable for varying workpiece materials. Compatibility with TDX bodies ensures straightforward integration into existing drilling toolsets. Geometry that stabilises the cut and reduces downtime The combination of a corner radius 1.2 mm and a 11° relief angle strengthens the cutting edge and reduces the risk of chipping under load. A one-sided chipbreaker directs swarf efficiently, improving chip control in through-hole and blind-hole drilling. The cylindrical hole with a single-side countersink (40°–60°) secures precise clamping and repeatable seating, which lowers vibration and the need for rework. These geometry choices translate into fewer indexings and longer net cutting time per insert. System advantages for faster setup and predictable output As part of the TungDrillTwisted system, the insert works with TDX/C‑TDX drill bodies, matching XPMT inserts, clamping screws and keys to create a modular drilling solution. Selection of diameter, L/D ratio, shank and the XPMT insert can be aligned to machine capability, material and coolant strategy to optimise cycle time. The modular approach simplifies inventory, shortens tool-change intervals and supports stable production sequences — all contributing to measurable process security and lower unit costs. The insert’s design is particularly suited to applications where mixed material batches and high availability are priorities. For reliable drilling performance with the AH725 grade, contact Metav Werkzeuge for fast availability and tailored application recommendations. Technical data Article number: 6861447 Manufacturer SKU: TUN6861447 SKU: 6861447-Tungaloy Designation: XPMT150512 AH725 Facts Corner radius: 1.2 mm Relief angle: 11° ISO designation: 150512 Plate size: 15 Countersink angle: 40°–60° Special features Material: carbide Coating: PVD (AH725) Application: drilling Chipformer: one-sided Hole style: cylindrical hole + single-side countersink Plate form: special System: TungDrillTwisted (TDX/C‑TDX bodies and XPMT inserts) FAQ What materials is this insert suited for? The XPMT150512 AH725 insert is formulated for steel and stainless steels, the PVD-coated carbide grade offering fracture resistance across mixed-material production. Which drill bodies are compatible with this insert? The insert is designed for the TungDrillTwisted system and fits TDX and C‑TDX drill bodies; use the specified clamping screws and key for secure assembly. How does the corner radius influence tool life? A corner radius of 1.2 mm increases edge strength and reduces chipping under load, which typically extends insert life and improves process stability. Does the insert provide effective chip control? Yes, the one-sided chipbreaker and the insert geometry promote controlled swarf formation and evacuation, supporting consistent hole quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH725 Wendeplatten - Tungaloy
XPMT150512 AH725 XPMT Wendeplatte für Bohren von Tungaloy XPMT150512 AH725 ist eine PVD-Beschichtete Hartmetall-Wendeplatte für allgemeines Bohren im Wechselplatten-Vollbohrsystem TungDrillTwisted und bietet hohe Prozesssicherheit bei wechselnden Werkstoffen XPMT150512 AH725 Wendeplatte für Bohren PVD-Beschichtung für erhöhte Standzeit Einseitiger Spanbrecher für stabile Spanbildung Zylindrisches Loch mit Senkung 40°–60° Kompatibel mit TungDrillTwisted TDX-Bohrkörpern Hohe Prozesssicherheit durch Material und Beschichtung Die Wendeplatte besteht aus Hartmetall und trägt die PVD-Beschichtung AH725, die speziell für eine universelle, ausbruchfeste Leistung bei Stahl und rostfreiem Stahl entwickelt wurde. Die Kombination aus Substrat und Beschichtung reduziert Werkzeugverschleiß und sorgt für konstante Standzeit, auch wenn Werkstoff und Schnittbedingungen wechseln. Anwender profitieren von planbaren Werkzeugwechselintervallen und weniger ungeplanten Stillständen. Praxisnahe Konstruktion für produktive Bohrung Der Spanbrecher ist einseitig ausgeführt und unterstützt eine kontrollierte Spanbildung, was die Spanabfuhr verbessert und die Oberflächenqualität am Bohrungsrand stabilisiert. Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), das eine sichere Spannposition am TDX-Bohrkörper ermöglicht. Dadurch wird die Montage vereinfacht und die Wiederholgenauigkeit bei Serienbohrungen erhöht. Flexibilität und Einsatzbereiche für Fertigungslinien Das Wechselplatten-System der Modellserie TungDrillTwisted erlaubt die Auswahl von Durchmesser, L/D-Verhältnis und Schnittstelle passend zur Maschine, zum Werkstoff und zur Kühlung. Die Platte eignet sich besonders für Fertigungsprozesse, in denen verschiedene Stähle und rostfreie Stähle bearbeitet werden. Produktionsplaner schätzen die Wirtschaftlichkeit durch reduzierte Rüstzeiten und die Möglichkeit, mit einer Sorte mehrere Anwendungen abzudecken. Praktische Hinweise zur Auswahl und Anwendung Bei der Auswahl der Wendeplatte sollten Plattengröße, Eckenradius und Freiwinkel berücksichtigt werden: Der angegebene Eckenradius von 1,2 mm und der Freiwinkel von 11° unterstützen stabile Schneidkantengeometrien bei Standard-Bohrparametern. Zur Prozessoptimierung empfiehlt sich die Abstimmung von Kühlschmierstoff und Schnittdaten auf den jeweiligen Werkstoff, um die Vorteile der AH725-Sorte voll auszuspielen. Empfehlung: Für sichere und produktive Bohrprozesse empfiehlt sich die Wahl der Tungaloy XPMT150512 AH725 Wendeplatte in Kombination mit TungDrillTwisted TDX-Bohrkörpern; bei Fragen zur Anwendung steht Metav Werkzeuge gern beratend zur Verfügung, per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6861405 Marke: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT150512 AH725 Wendeplatte Hersteller SKU: TUN6861405 Fakten Radius: 1.2 mm Freiwinkel: 11° Plattengröße: 15 mm Hersteller Artikelnummer: 6861405 Besonderheiten Material: Hartmetall Beschichtung: AH725 (PVD-Beschichtung, universelle ausbruchfeste Sorte) Spanbrecher: einseitig Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Einsatz: Bohren Systemaufbau: TDX/C-TDX-Bohrkörper; XPMT-Bohrplatten; Spannschrauben; Schlüssel FAQ Welche Werkstoffe lassen sich mit der XPMT150512 AH725 zuverlässig bearbeiten? Die XPMT150512 AH725 Wendeplatte von Tungaloy ist speziell für Stahl und rostfreien Stahl ausgelegt und bietet durch die PVD-Beschichtung AH725 gute Prozesssicherheit auch bei wechselnden Werkstoffen. Wie unterstützt der einseitige Spanbrecher die Produktion? Der einseitige Spanbrecher fördert eine definierte Spanbildung und erleichtert die Spanabfuhr, was bei Serienbohrungen die Standzeit der Tungaloy Wendeplatte verlängert und Nachbearbeitung reduziert. Ist die XPMT150512 kompatibel mit TungDrillTwisted TDX-Bohrkörpern? Ja, die Platte ist Teil der TungDrillTwisted Familie und wurde für die Montage auf TDX-Bohrkörpern entwickelt; die Befestigung erfolgt über das zylindrische Loch mit einseitiger Senkung. Welche Vorteile bringt die AH725-PVD-Beschichtung im Arbeitsalltag? Die AH725-PVD-Beschichtung sorgt für eine ausbruchfeste Schneidkante, bessere Verschleißfestigkeit und damit für konstante Performance und planbare Werkzeugstandzeiten in Fertigungsprozessen. Welche Angaben helfen bei der Ersatzbestellung? Für Nachbestellungen eignen sich die Hersteller Artikelnummer 6861405 sowie die Hersteller SKU TUN6861405; die genaue Bezeichnung XPMT150512 AH725 vereinfacht die Teilezuordnung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 150512 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a modular indexable drilling system, a PVD-coated cemented carbide grade optimised for process security, and precise clamping features to keep production running reliably; order the insert via Metav Werkzeuge or contact the consultants for application support. XPMT 150512 AH725 indexable insert for full-bore drilling — Tungaloy The XPMT 150512 AH725 is an indexable insert designed for use in modular full-bore drilling systems, delivering reliable performance for general drilling in steel and stainless steel. PVD-coated cemented carbide AH725 Compatible with TDX/C‑TDX drill bodies Corner radius R1.2 for stable cutting Cylindrical hole with single-sided countersink Modular design that reduces inventory and setup time The TungDrillTwisted family is built as a modular indexable drilling system, consisting of TDX drill bodies, XPMT inserts, clamping screws and a single key for assembly. This modularity enables fast tool changes and fewer complete tools in stock, which reduces setup time and simplifies spare-parts logistics. The PVD-coated cemented carbide grade provides a balance of toughness and wear resistance, making the insert a pragmatic choice for shops that machine varying workpiece materials. Stable cutting and enhanced process security A dedicated DG chipbreaker geometry and a corner radius R1.2 promote consistent chip formation and a controlled cutting edge, which supports a stable process when drilling steels and stainless steels. The insert’s 11° relief angle reduces flank contact, lowering friction and heat at the cutting edge; the result is improved repeatability and fewer unplanned tool changes, which benefits cycle-time reliability and overall productivity. Secure clamping and accurate repeatability The insert features a cylindrical central hole with a single-sided countersink (40°–60°) to ensure precise seat and consistent clamping torque within the TDX holder. This configuration reduces runout and contributes to axial and radial stability during drilling operations, which is particularly relevant for longer overhangs and higher L/D ratios. Reliable fixation translates directly into predictable hole quality and reduced rework. Versatility for general drilling applications As a universal, breakage-resistant grade developed for mixed-material environments, the insert is suitable for general drilling tasks where process security is critical. The TungDrillTwisted family is offered in variants that differ by overhang (L‑D ratio) and interface type, allowing selection of the appropriate holder, shaft and insert combination to match machine power, coolant availability and component geometry. For shops aiming to streamline tool sets without compromising performance, this indexable insert offers a practical compromise between flexibility and durability. For tailored advice on selecting the right TungDrillTwisted combination or to order the Tungaloy XPMT 150512 AH725 through Metav Werkzeuge, please contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6886354 Manufacturer SKU: TUN6886354 SKU: 6886354-Tungaloy Model series: TungDrillTwisted Material: Cemented carbide Facts Corner radius: R1.2 Relief angle: 11° ISO designation: 150512 Plate size: 15 Special features Coating: PVD, grade AH725 Chipbreaker: DG Hole: cylindrical hole with single-sided countersink (40°–60°) Plate form: special System compatibility: TDX / C‑TDX drill bodies Typical application: drilling Suitable materials: steel and stainless steels FAQ What workpiece materials is this insert suitable for? The XPMT 150512 AH725 insert from Tungaloy is formulated for machining steel and stainless steels, offering breakage resistance where material types change. Can the insert be used in existing TDX drill holders? Yes, the insert is compatible with TDX and C‑TDX drill bodies and is intended for the TungDrillTwisted indexable drilling system. What does the DG chipbreaker provide in practice? The DG chipbreaker on the XPMT insert improves chip control and stability, reducing the risk of chip congestion and helping maintain a secure process. How does the central hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) ensures a precise seating and secure clamping, which minimises runout and enhances repeatability during drilling. Which parameters should be matched when selecting a full drill assembly? Select diameter, L/D ratio, holder shaft and the XPMT insert grade to match the machine power, coolant conditions and workpiece material for optimal process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH740 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide wear resistance, a sharp cutting edge for process security, and seamless integration with TDX drill bodies to ensure dependable drilling performance. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. XPMT150512 AH740 indexable insert — PVD‑coated carbide, 1.2 mm corner radius (Tungaloy) XPMT150512 AH740 is an indexable insert designed for general drilling in the TungDrillTwisted family, suited for applications where a sharp cutting edge and process reliability are required PVD-coated grade AH740 for wear resistance Designed for TungDrillTwisted indexable drills Cylindrical hole with single-sided countersink 1.2 mm corner radius, 11° clearance angle Delivering consistent chip control and drilling reliability The PVD‑coated carbide composition of the insert provides elevated resistance to flank wear and micro‑chipping, ensuring longer intervals between tool changes and a stable machining process. The plate’s integrated chipbreaker geometry and one‑sided design promote predictable chip formation during full‑bore operations, which reduces vibration and supports constant material evacuation. In practice, this translates into fewer scrap parts and more reproducible hole quality during medium‑ to high‑volume drilling tasks. Longer edge life and process security for demanding operations A precisely specified corner radius of 1.2 mm combined with an 11° clearance angle balances edge strength and cutting efficiency. The rounded corner reduces the risk of edge fracture under interrupted cuts, while the clearance protects the flank from rubbing and thermal degradation. The AH740 grade’s PVD finish further improves abrasion resistance and maintains a sharp cutting line, delivering predictable tool life and a stable surface finish that supports downstream processes. Seamless system integration for quick tool setup This indexable insert is manufactured for the TungDrillTwisted family and mates with TDX drill bodies that accept XPMT plates; the system is completed with clamping screws and a key for secure fastening. The plate’s cylindrical hole and single‑side countersink (40°–60°) ensure repeatable seating and simple indexing during maintenance. Selection of diameter, L/D, shank and suitable insert variant should be matched to the machine, coolant strategy and cycle requirements to achieve the intended productivity gains. Practical advantages in everyday drilling workflows Designed as a special‑form insert with a nominal plate size of 15, the component simplifies inventory management by combining robustness with straightforward identification. The AH740 cutting grade is optimised for resistance to wear and chipping, making the insert appropriate where edge integrity and process reliability are priorities. Handling and replacement follow standard indexable‑insert procedures, enabling fast changeovers and minimal spindle downtime. Contact Metav Werkzeuge today to discuss the XPMT150512 AH740 insert, check compatibility with existing TungDrillTwisted bodies, or request tailored advice for specific drilling applications — Metav Werkzeuge is ready to assist. Technical data Article number: 6821651 Manufacturer SKU: TUN6821651 Product label: XPMT150512 AH740 Tungaloy insert Model series: TungDrillTwisted Grade/coating: AH740 (PVD‑coated) Material: Carbide Specifications Corner radius: 1.2 mm Free clearance angle: 11° Plate size: 15 mm Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Manufacturer article number: 6821651 Features & applications Indexable insert for drilling systems Special plate form (Sonder) Unilateral chipbreaker design System components: TDX/C‑TDX drill bodies, XPMT inserts, clamping screws and key Typical application: drilling; selection of diameter, L/D, shank and insert to match machine and cooling FAQ What is the primary application for this insert? The XPMT150512 AH740 insert is intended for full‑bore drilling within the TungDrillTwisted system and is optimised where a sharp cutting edge and process security are required. Which drill bodies accept this insert? The indexable insert is designed to be used with TDX and C‑TDX drill bodies that accept XPMT plates; proper seating is ensured by the cylindrical hole and single‑side countersink. What does the AH740 designation mean for performance? AH740 denotes a PVD‑coated carbide grade that offers improved wear resistance and reduced susceptibility to chipping, contributing to longer tool life and stable drilling performance with the XPMT insert. How do the corner radius and clearance angle affect machining? A 1.2 mm corner radius increases edge robustness for interrupted cuts, while an 11° clearance angle limits flank contact and helps maintain cutting efficiency and surface quality. What should be considered when selecting the correct insert version? Selection should consider bore diameter, L/D ratio, shank interface and the machine’s coolant arrangement; these factors ensure the chosen XPMT insert performs reliably within the TungDrillTwisted system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 150512 AH9030 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH9030 carbide for durable edge life, a DJ chipbreaker that secures stable chip formation and a 1.2 mm corner radius for consistent dimensional control; order the XPMT150512R-DJ AH9030 insert directly via Metav Werkzeuge or ask our consultants if needed. XPMT 150512 AH9030 XPMT150512R-DJ – PVD-coated carbide insert with DJ chipbreaker for indexable full-boring systems by Tungaloy XPMT150512R-DJ AH9030 is an indexable insert designed for replaceable-plate full-boring systems, optimised for general drilling applications where edge stability and predictable chip control are required PVD-coated carbide for wear resistance 1.2 mm corner radius for dimensional control Cylindrical hole with single-side countersink DJ chipbreaker for stable chip formation Efficient, predictable machining with a focused edge design The PVD-coated AH9030 cemented carbide grade and the DJ chipbreaker deliver high stability at the cutting edge, which translates into repeatable hole diameters and reduced process variance. The combination of a hard PVD coating and a tough substrate reduces flank wear and the risk of edge chipping under interrupted cuts. For production-focused operations this means fewer reworks and a more reliable cycle time, as the insert maintains cutting geometry over longer periods compared to uncoated grades. Robust build and secure seating for process safety A precisely formed cylindrical hole with a single-side countersink (40°–60°) ensures consistent seating and clamping in the drill body, reducing the likelihood of vibration-related wear. The insert’s 1.2 mm corner radius and 11° relief angle support both edge strength and acceptable surface finish in general drilling tasks. The use of a specialised insert form improves chip evacuation when combined with suitable coolant strategies, enhancing process security and reducing the chance of unexpected tool failure. System compatibility that simplifies tooling decisions The insert belongs to the TungDrillTwisted family and is intended for use with TDX drill bodies in an indexable full-boring system. The ISO designation 150512 and the plate size 15 facilitate straightforward matching to compatible holders and machine setups. Selection should be based on the intended diameter, L/D ratio and machine spindle: matching insert geometry, the correct clamping screw and the corresponding TDX holder ensures reliable performance and repeatable results. Practical handling and application guidance for workshop use The indexable concept keeps tool setup efficient: replacement of the insert restores cutting geometry without regrinding, which reduces downtime. The system typically comprises the TDX/C-TDX drill body, the XPMT insert, clamping screws and key, so users can perform insert changes quickly and safely. For best results, pair this grade with cutting parameters adapted to the workpiece material and ensure secure torque on the clamping screw to maintain consistent seating and chip control. Discuss specific cutting data and availability for the Tungaloy XPMT150512R-DJ AH9030 insert with Metav Werkzeuge, or request tailored recommendations for machining parameters and holder compatibility via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 6718255 Manufacturer SKU: TUN6718255 Model series: TungDrillTwisted Insert designation: XPMT150512R-DJ AH9030 Facts Corner radius: 1.2 mm Relief (free) angle: 11° ISO code: 150512 Plate size: 15 Special features PVD-coated AH9030 cemented carbide DJ chipbreaker Cylindrical hole with single-side countersink (40°–60°) Special plate form for indexable full-boring systems Compatible with TDX/C-TDX drill bodies; system includes clamping screws and key FAQ What materials is this insert suited for? The XPMT150512R-DJ AH9030 insert is a PVD-coated carbide grade intended for general drilling; material suitability depends on workpiece and cutting data, and Metav Werkzeuge can advise on matching the AH9030 grade to specific steels and alloys. How does the DJ chipbreaker affect machining? The DJ chipbreaker on this indexable insert promotes controlled chip formation and evacuation, improving process stability and reducing the risk of jamming or irregular chip shapes when used with the correct holder and coolant strategy. Which drill bodies are compatible with this insert? This insert is designed for use in TDX/C-TDX drill bodies as part of the TungDrillTwisted indexable full-boring system; ensure the holder is specified for ISO 150512 plates and the TDX interface. What does the cylindrical hole and countersink provide? The cylindrical hole with a single-side countersink (40°–60°) ensures secure seating and repeatable clamping, which contributes to vibration resistance and consistent machining performance in the drilling system. How often should the insert be replaced? Insert life depends on material, cutting parameters and operating conditions; replace the insert when wear or edge damage affects hole tolerance or surface finish—Metav Werkzeuge can provide guidance based on observed wear patterns. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com