WPMT 090725 AH3135 Wendeplatten - Tungaloy
Take advantage of the DoFeed high‑feed geometry together with the PVD‑coated AH3135 carbide to increase material removal rates while maintaining edge security and surface quality. For reliable high‑feed milling performance and consistent chip control, order the WPMT 090725 AH3135 insert directly via Metav Werkzeuge or consult our application specialists for process tuning. WPMT 090725 AH3135 — Trigon insert for high‑feed milling (DoFeed) by Tungaloy WPMT 090725 AH3135 is a trigon indexable insert developed for high‑feed milling applications, optimised for pocketing and face milling within the DoFeed family. High‑feed design for large material removal PVD‑coated carbide AH3135 for wear resistance Trigon form with 80° and 2.5 mm corner radius Cylindrical hole with single‑side countersink Faster cycle times with high‑feed geometry The DoFeed series delivers measurable productivity gains through its high‑feed milling geometry, enabling larger time‑span volumes even at small axial depths. That geometry converts higher feed per tooth into a reduced number of passes, shortening cycle times without increasing radial engagement. The combination of a shallow axial immersion and aggressive feed rates reduces cutting forces in the axial direction and stabilises machining behaviour, which often results in improved tool life and a more consistent surface finish. This makes the system particularly suitable for pocketing and planing operations where throughput is critical. Durable edges and consistent process security The PVD‑coated carbide AH3135 grade offers a balance of wear resistance and fracture toughness, engineered for milling where a sharp cutting edge and process security are both required. The applied coating enhances thermal stability and wear protection, while the substrate carbide provides resistance to chipping under interrupted cuts. Together, these characteristics support longer uninterrupted running and fewer insert changes, increasing overall equipment effectiveness. The included chipbreaker MH is optimised for controlled chip formation during high feeds, reducing the risk of built‑up edge and improving swarf evacuation. Machining stability and system compatibility The trigon plate form with an 80° peripheral angle and 2.5 mm corner radius gives predictable engagement and robust corner strength for a range of steels and castings. Mechanical retention is aided by the central cylindrical hole with a single‑side countersink (40°–60°), which ensures accurate seating and repeatable clamping in compatible toolholders. The insert thickness of 7.94 mm provides stiffness for demanding operations, and the modest clearance angle of 11° aids in preventing rubbing on inclined surfaces. As part of a complete system—milling body, matching indexable inserts and fixing screws—this insert can be integrated quickly into existing DoFeed‑capable assemblies for immediate productivity benefits. Arrange a process review with Metav Werkzeuge to ensure the WPMT 090725 AH3135 insert matches the machining strategy and material mix for the application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: 6774970 Manufacturer SKU: TUN6774970 Label/SKU: 6774970‑Tungaloy Material: Carbide Model series: DoFeed Grade/coating: AH3135 (PVD‑coated) Core dimensions Plate size: 09 Plate thickness: 7.94 mm Corner radius: 2.5 mm Peripheral angle: 80° Clearance angle: 11° Special features Trigon plate form Chipbreaker: MH With cylindrical hole and single‑side countersink (40°–60°) Suitable for milling, pocketing and face machining Part of a high‑feed DoFeed family FAQ What applications suit this trigon insert best? This trigon insert is designed for high‑feed milling tasks such as pocketing and face machining within the DoFeed family; the AH3135 grade performs well where a sharp cutting edge and process reliability are required. Which materials can be machined with this insert? The AH3135 PVD‑coated carbide insert is optimised for a broad range of steels and cast materials commonly encountered in production milling; the chipbreaker MH supports controlled chip formation during aggressive feeds. How does the insert ensure secure clamping in the toolbody? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°) for stable seating and repeatable clamping in compatible holders, supporting consistent indexability and tool runout control. What benefits does the AH3135 coating provide compared with uncoated grades? The PVD coating on the AH3135 grade improves thermal and abrasive wear resistance, extending edge life under high‑feed conditions while preserving the substrate toughness needed to resist chipping. Can the insert be used in existing DoFeed tool systems? Yes; the WPMT 090725 AH3135 insert is part of the DoFeed family and is intended for integration with matching milling bodies and fixing hardware that accept the 09 trigon size Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WPMT 090725 AH3135 Wendeplatten - Tungaloy
Take advantage of the combination of a high-feed design, a wear-resistant PVD-coated grade and a secure clamping geometry to boost cycle times and maintain process stability; order or discuss your application with Metav Werkzeuge for tailored cutting data and rapid supply. WPMT 090725 AH3135 — Indexable Insert for Milling (High-feed, 80°) — Tungaloy The WPMT090725ZSR AH3135 is an indexable trigon insert developed for high-feed milling, optimised for pocketing and face milling with small axial engagements. High-feed family for large chip volumes PVD-coated AH3135 for wear resistance Trigon shape with 2.5 mm corner radius Cylindrical hole with single-sided countersink Increased productivity with high-feed cutting The DoFeed series is designed to convert small axial depths into large material removal rates; the geometry of this trigon insert enables stable, high-feed passes that raise throughput without increasing depth of cut. The grade is a PVD-coated wear-resistant variant, paired with a precisely ground cutting edge to sustain performance under interrupted cuts common in pocketing operations. Using the WPMT090725ZSR AH3135 in a suitable milling body reduces tool changes and increases uptime, delivering measurable gains in manufacturing output while keeping process forces and vibrations in check. Stable edge life and precise chip control A sharp cutting edge combined with a one-sided chip control geometry ensures reliable chip formation and evacuation even at high feed rates. The trigon form and the 2.5 mm corner radius give a balance between edge strength and profile fidelity: corners resist breakage while maintaining an effective cutting edge for finishing passes. The insert’s cylindrical hole with a single-sided countersink (40°–60°) secures repeatable seating in the cutter, enhancing positional stability and lowering the risk of edge movement that can cause premature failure. Practical application scope and tooling compatibility Engineered for milling tasks such as high-feed milling, pocketing and face machining, this insert is intended for integration with matching milling bodies and clamping screws to create a complete system. Its 80° main angle provides a compromise of robustness and accessibility for shallow axial cuts, and the carbide substrate supports heat resistance and dimensional stability during longer cycles. For converters of prototype runs to serial production, the combination of shape, grade and hole style simplifies tool set-up and repeatability on production lines. Economic benefits through reduced downtime Selecting a grade that is both wear- and chipping-resistant reduces the frequency of index changes and minimises scrap from unstable cutting. The AH3135 formulation focuses on a long tool life under demanding intermittent-cut conditions, which translates to lower tooling consumption and fewer machine interruptions. In practice this means higher machine availability and more predictable component quality, supporting a consistent surface finish and dependable cycle times across batches. Speak to Metav Werkzeuge for tailored cutting data and fast supply of the WPMT090725ZSR AH3135; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting parameters Technical Data Article number: 6757848 SKU: 6757848-Tungaloy Manufacturer SKU: TUN6757848 Model series: DoFeed Insert designation: WPMT090725ZSR AH3135 Facts Corner radius: 2.5 mm Insert size: 09 Plate thickness: 7.94 mm Free angle: 11° Main angle: 80° ISO code: 090725 Special features Grade/coating: PVD-coated carbide AH3135 Shape: trigon Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Typical applications: high-feed milling, pocketing, face milling System components: milling body, compatible indexable insert screws FAQ What milling operations suit this trigon insert best? The WPMT090725ZSR AH3135 is optimised for high-feed milling, pocketing and face milling where small axial depths and large chip volumes are required. How does the AH3135 grade extend tool life? The PVD-coated AH3135 grade offers wear and chipping resistance for interrupted cuts, which helps maintain edge integrity and reduces the need for frequent indexing. What is the corner radius and why does it matter? The insert has a 2.5 mm corner radius; this balances edge strength with the ability to produce consistent surface finishes on shoulder and pocket features. Which clamping or hole style ensures the best seat stability? A cylindrical hole with a single-sided countersink (40°–60°) provides secure seating and repeatable positioning in suitable Tungaloy milling bodies. Can this insert be used for finishing as well as roughing? Yes; while designed for high-feed roughing to increase material removal, its sharp edge and defined radius allow controlled finishing passes when required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WPMT 090725 AH3135 Wendeplatten - Tungaloy
WPMT 090725 AH3135 Wendeschneidplatte für Fräsen – Tungaloy Die WPMT090725 AH3135 ist eine Hochvorschub-Wendeschneidplatte, entwickelt für effizientes Fräsen bei kleinen axialen Zustellungen und großen Zeitspanvolumina. Hochvorschub-Fähig für hohe Materialabtragraten PVD-beschichtetes Hartmetall für Prozesssicherheit Trigon-Form für stabile Spanabfuhr Zylindrisches Loch mit Senkung für sichere Befestigung Spanbrecher ML für kontrollierte Spanbildung Produktivität steigern durch effiziente Hochvorschubbearbeitung Mit dieser Wendeschneidplatte lässt sich die Produktivität bei der Bearbeitung erhöhen, weil die DoFeed-Modellserie speziell für große Zeitspanvolumina bei kleinen axialen Zustellungen ausgelegt ist. Die Kombination aus PVD-beschichtetem Hartmetall und einer scharfen Schneidkante sorgt für konstante Schnittbedingungen und damit für reproduzierbare Ergebnisse. Anwender profitieren von kürzeren Bearbeitungszeiten und besserer Maschinenauslastung, was die Wirtschaftlichkeit im Betrieb direkt verbessert. Prozesssicherheit und Standzeit durch optimierte Spanbildung Die Ausführung mit Spanbrecher ML und der trigonförmigen Plattengeometrie ermöglicht eine kontrollierte Spanabfuhr selbst bei hohen Vorschubwerten. Das reduziert Ausbrüche und Werkzeugwechsel, was die Standzeit erhöht und Stillstandszeiten verringert. Für Anwender, die auf konstante Oberflächengüten und wenige Nacharbeitsschritte angewiesen sind, bietet die Sorte AH3135 ein ausgewogenes Verhältnis aus Zähigkeit und Härte. Flexibler Einsatz und einfache Integration in bestehende Systeme Die Wendeschneidplatte ist für typische Fräsaufgaben wie Taschen- und Planbearbeitung konzipiert und lässt sich problemlos in gängige Fräskörper-Systeme einsetzen. Technische Details wie Radius von 2,5 mm, Plattendicke von 7,94 mm und das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtern den mechanischen Aufbau und gewährleisten sichere Befestigung. Hinweise zu Anwendung und Schnittdaten werden empfohlen, um die Lebensdauer weiter zu optimieren. Empfehlung: Für produktive Hochvorschubfräsungen die Tungaloy AH3135-Sorte wählen und technische Beratung sowie Bestellung direkt bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6752015 Marke: Tungaloy Serie: DoFeed Bezeichnung: WPMT090725ZPR-ML AH3135 SKU: 6752015-Tungaloy Fakten Plattendicke: 7,94 mm Radius: 2,5 mm Winkel: 80° Freiwinkel: 11° Plattengröße: 09 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (AH3135) Plattenform: trigon Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: ML Anwendung: Fräsen, Hochvorschubfräsen, Taschen- und Planbearbeitung Einsatzbereich: große Zeitspanvolumina bei kleinen axialen Zustellungen SKU Hersteller: TUN6752015 FAQ Für welche Fräsanwendungen ist die Platte besonders geeignet? Die WPMT090725ZPR-ML AH3135 von Tungaloy eignet sich besonders für Hochvorschubfräsen sowie für Taschen- und Planbearbeitung, da die Geometrie und der Spanbrecher ML große Zeitspanvolumina bei kleinen axialen Zustellungen ermöglichen. Welche Vorteile bietet die AH3135-Sorte gegenüber Standard-Sorten? Die AH3135-Sorte bietet durch die PVD-Beschichtung und die ausgewogene Schneidstoffzusammensetzung erhöhte Prozesssicherheit und längere Standzeit, was sich in weniger Werkzeugwechseln und konstanter Bearbeitungsqualität niederschlägt. Ist die Platte mit handelsüblichen Fräskörpern kompatibel? Ja, die WPMT090725ZPR-ML AH3135 ist als Wendeschneidplatte für gängige Frässysteme konstruiert; das zylindrische Loch mit Senkung sorgt für eine sichere Befestigung in kompatiblen Fräskörpern. Wie beeinflusst der Spanbrecher ML die Bearbeitung? Der Spanbrecher ML sorgt für eine kontrollierte Spanbildung und -abfuhr, reduziert Ausbrüche an der Schneidkante und verbessert so die Wiederholgenauigkeit und Oberflächengüte bei hohen Vorschubwerten. Welche technischen Angaben sind für die Schnittdatenoptimierung wichtig? Für optimale Ergebnisse sind insbesondere Radius, Plattendicke, Freiwinkel und die Schneidstoffsorte AH3135 zu berücksichtigen; genaue Schnittdaten hängen von Werkstoff, Maschine und Spannsystem ab und sollten abgestimmt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT 090725 AH730 Wendeplatten - Tungaloy
WPMT 090725 AH730 Wendeschneidplatte zum Fräsen von Tungaloy Die WPMT 090725 AH730 bietet Hochvorschub-Leistung für Taschen- und Planbearbeitung. WPMT090725ZPR-DML Wendeschneidplatte von Tungaloy Für Hochvorschubfräsen und Planbearbeitung AH730 PVD-beschichtung für verschleißfeste Schneidkante Trigonform mit 80° Anstellwinkel und 2,5 mm Radius Zylindrisches Loch mit einseitiger Senkung für sicheren Sitz Effizienzsteigerung bei Hochvorschubprozessen Die WPMT090725ZPR-DML aus der Modellserie DoFeed ist auf große Zeitspanvolumina bei kleinen axialen Zustellungen ausgelegt. Fertigungsbetriebe profitieren von kürzeren Schnittzeiten und konstanten Prozessparametern, weil die Geometrie und der Spanformer auf hohe Vorschubgeschwindigkeiten abgestimmt sind. Diese Auslegung reduziert Stillstandzeiten und erhöht die Produktivität bei Taschen- und Planbearbeitung ohne Abstriche bei der Oberflächenqualität. Robuste Schneidstofftechnik und Geometrie Die Kombination aus PVD-beschichtetem Hartmetall der Sorte AH730 und der Trigonform ergibt eine verschleiß- und ausbruchfeste Schneidkante. Der Spanbrecher DML sorgt für kontrollierte Spanbildung und erleichtert die Abfuhr großer Spanvolumina. Kurz erklärt: Bei Hochvorschubfräsen bedeutet „axiale Zustellung“ die tiefe Eingriffstiefe pro Zustellung, und das „Zeitspanvolumen“ beschreibt die Spanmenge pro Zeit; eine optimierte Geometrie reduziert thermische und mechanische Belastungen an der Schneide. Zielgruppe und konkrete Anwendernutzen Werkstätten und Serienfertiger, die auf schnelle Schrupp- oder Halbfertigbearbeitung setzen, finden in dieser Platte eine wirtschaftliche Lösung. Die Platte eignet sich besonders für Anwendungen, bei denen eine scharfe Schneidkante und Prozesssicherheit verlangt werden. Vorteile sind längere Standzeiten, gleichbleibende Bearbeitungsergebnisse und eine einfache Einsetzbarkeit in gängigen Fräskörpern mit zylindrischem Loch und Senkung. Empfehlung: Für produktive Hochvorschubfräsprozesse die WPMT 090725 AH730 über Metav Werkzeuge anfragen – technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6855522 Marke: Tungaloy Serie: DoFeed SKU: 6855522-Tungaloy Bezeichnung: WPMT090725ZPR-DML AH730 Einsatz: Fräsen Schneidstoff: PVD-beschichtetes Hartmetall Daten Winkel: 80° Eckenradius: 2,5 mm Freiwinkel: 11° Plattendicke: 7,94 mm Plattengröße: 09 Besonderheiten Material: Hartmetall Sorte: AH730 (PVD-beschichtet) Spanbrecher: DML — optimierte Spanabfuhr Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Trigon Anwendung: Fräsen Modellserie: DoFeed FAQ Welche Hauptvorteile bietet die WPMT090725ZPR-DML AH730? Die WPMT090725ZPR-DML AH730 kombiniert hohe Vorschubrate mit verschleißfester Schneidkante; dadurch entstehen kürzere Bearbeitungszeiten und stabile Ergebnisse bei Taschen- und Planbearbeitung. Für welche Fräsaufgaben ist die Platte besonders geeignet? Speziell für Hochvorschubfräsen sowie Schrupp- und Halbfinish-Operationen in Taschen- und Planbearbeitung ist die Platte konzipiert, da Geometrie und Spanformer große Zeitspanvolumina bei kleinen axialen Zustellungen unterstützen. Wie unterstützt die AH730-Sorte die Prozesssicherheit? Die AH730-Sorte ist PVD-beschichtet und verschleißfest ausgelegt; das sorgt für eine stabile Schneidkante, geringere Ausbrüche und somit verlässliche Fertigungsergebnisse über längere Standzeiten. Passt die Platte in konventionelle Fräskörper mit Passschraube? Ja, die Ausführung mit zylindrischem Loch und einseitiger Senkung (40°–60°) ist für den sicheren Sitz in gängigen Fräskörpern ausgelegt und erleichtert die Montage. Welche Rolle spielt der Spanbrecher DML? Der Spanbrecher DML formt den Span so, dass die Spanabfuhr verbessert und die mechanische Belastung der Schneide reduziert wird; das erhöht die Wirtschaftlichkeit im Prozess. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT 090725 T3130 Wendeplatten - Tungaloy
High-feed performance and the T3130 carbide grade deliver productive, wear-resistant milling with reliable edge stability and efficient chip control thanks to the ML chipbreaker and trigon form; order the WPMT090725ZPR-ML T3130 directly via Metav Werkzeuge or consult our specialists for tailored application support. WPMT 090725 T3130 – Indexable insert for milling by Tungaloy A trigon indexable insert designed for high-feed milling applications, combining a balanced Tungaloy T3130 grade with a geometry optimised for large material removal at shallow axial depths. DoFeed series for high-feed milling T3130 carbide grade for balanced wear Trigon insert with 2.5 mm corner radius Cylindrical hole with 40°–60° countersink Increased productivity with high-feed geometry The DoFeed family is engineered for high-feed milling, enabling substantial time-material removal while using only small axial engagements. The WPMT090725ZPR-ML T3130 combines a trigon profile with a steep 80° approach angle to convert radial immersion into efficient chip thinning, which reduces cutting forces and shortens cycle times. This geometry is particularly suited for rapid pocketing and face milling where throughput is critical, offering a clear productivity advantage without the need for deeper axial cuts. Durable grade and predictable tool life The T3130 carbide composition provides a measured balance of wear resistance and toughness, supporting consistent performance under elevated chip loads. Paired with the ML chipbreaker, the insert promotes controlled chip formation and evacuation, which reduces edge deterioration and stabilises the cutting process. As a result, users gain improved process reliability and fewer unexpected tool changes, translating into lower machine downtime and steadier production output. Secure clamping, flexible indexing and practical dimensions The trigon 09 size with a 2.5 mm corner radius and a plate thickness of 7.94 mm offers robust edge strength for demanding milling passes. The insert is supplied with a cylindrical central hole plus a single-sided countersink (40°–60°) to ensure secure seating and repeatable indexing on compatible cutters. A free cutting angle of 11° and the DoFeed geometry together allow versatile use in pocketing and face operations while maintaining favourable surface finish characteristics and reliable edge life. Contact Metav Werkzeuge for application recommendations, availability and to discuss how the WPMT090725ZPR-ML T3130 can improve cycle times in specific milling tasks Technical data Article number: 6853867 SKU: 6853867-Tungaloy Manufacturer SKU: TUN6853867 Numbers / Core technical data Corner radius: 2.5 mm Approach angle: 80° Free cutting angle: 11° Plate thickness: 7.94 mm Plate size: 09 Designs / Special features Cemented carbide material Tungaloy grade T3130 DoFeed model series Trigon plate form ML chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Intended for milling (high-feed, pocketing, face milling) System comprises insert, matching screws and cutter bodies FAQ What operations is this insert designed for? The WPMT090725ZPR-ML T3130 is optimised for high-feed milling, including pocketing and face milling, where large material removal rates at small axial depths are required. Which materials can be machined with this grade? The T3130 grade offers a balance of wear resistance and toughness suitable for general milling tasks; consult process data to match workpiece metallurgy with the T3130 performance profile. How does the 2.5 mm corner radius affect cutting performance? A 2.5 mm corner radius increases edge strength and improves tool life in interrupted or heavier cuts, while supporting surface finish requirements in face and pocket milling. How is the insert secured in the cutter? The insert features a cylindrical central hole with a single-sided countersink (40°–60°) for secure seating and repeatable indexing on compatible DoFeed cutter bodies. How does the ML chipbreaker benefit the process? The ML chipbreaker promotes stable chip formation and evacuation, reducing the risk of built-up edge and enhancing consistent cutting conditions during high-feed operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WPMT 090725 T3130 Wendeplatten - Tungaloy
WPMT 090725 T3130 – Wendeplatte für Fräsen von Tungaloy WPMT 090725 T3130 ist eine Trigon-Wendeplatte für produktives Hochvorschubfräsen und Taschenbearbeitung mit optimierter Schneidkantenstabilität DoFeed-Serie: Hochvorschub für große Zeitspanvolumina Trigon-Platte 09 mit 80° Keilwinkel Sorte T3130: Ausgewogene Zähigkeit und Verschleißfestigkeit Mit Loch und einseitiger Senkung für sichere Spannsysteme Eckenradius 2,5 mm für robuste Schneidkanten Höhere Prozessleistung bei kleinen axialen Zustellungen Die Wendeplatte aus Hartmetall der Modellserie DoFeed wurde entwickelt, um beim Hochvorschubfräsen hohe Zeitspanvolumina zu erreichen, ohne die Schnittstabilität zu opfern. Durch die Kombination aus T3130-Schneidstoff und trigonaler Plattenform lässt sich die Spanbildung kontrollieren, was zu konstanter Schnittqualität und längeren Standzeiten führt. Anwender profitieren von höherer Produktivität bei plan- und taschenförmigen Bearbeitungen. Effiziente Span- und Kantenkontrolle für sichere Prozesse Die einseitige Spanbrecher-Geometrie und der definierte Eckenradius von 2,5 mm reduzieren Bruchrisiken an der Schneidkante und verbessern die Spanabfuhr bei hohen Vorschubwerten. Der 80° Keilwinkel und der Freiwinkel 11° sorgen für stabile Kontaktverhältnisse und ermöglichen effiziente Zerspanung bei geringem axialen Eingriff. Das Ergebnis ist eine gleichbleibende Werkstückoberfläche und hohe Prozesssicherheit. Praktischer Aufbau und Einbauvorteile Die Platte ist mit einem zylindrischen Loch und einer einseitigen Senkung (40°–60°) versehen, was die Montage in handelsüblichen Fräskörpern vereinfacht und für sicheren Sitz sorgt. Die Plattendicke von 7,94 mm und die Plattengröße 09 bieten mechanische Stabilität auch bei aggressiveren Schnittbedingungen. Diese Merkmale machen die Wendeplatte zu einer praxisnahen Lösung für industrielle Fräsaufgaben. Die Wendeplatte von Tungaloy empfiehlt sich für produktives Hochvorschubfräsen mit hoher Wirtschaftlichkeit; bei technischen Fragen stehen Ihnen Metav Werkzeuge unter info@metav-werkzeuge.com oder +49 2822 7131930 gern zur Verfügung. Produktmerkmale Artikelnummer: 6853868 Marke: Tungaloy Serie: DoFeed Hersteller SKU: TUN6853868 Bezeichnung: WPMT090725 T3130 Tungaloy-Wendeplatte Daten Radius: 2,5 mm Eckenradius: 2,5 mm Plattendicke: 7,94 mm Plattengröße: 09 Keilwinkel: 80° Freiwinkel: 11° Besonderheiten Material: Hartmetall Sorte/Beschichtung: T3130 Schneidstofftyp: Tungaloy-Schneidstoffsorte Plattenform: Trigon Spanbrecher: einseitig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Fräsen, Hochvorschub, Taschen- und Planbearbeitung Systemaufbau: Fräskörper, Wendeschneidplatten und Schrauben FAQ Was zeichnet die Sorte T3130 aus? Die Sorte T3130 kombiniert Verschleißfestigkeit mit ausreichender Zähigkeit, wodurch die WPMT 090725 T3130 von Tungaloy besonders für Hochvorschubfräsen geeignet ist und stabile Schneidkanten liefert. Ist die WPMT 090725 T3130 für alle Fräskörper kompatibel? Die Platte besitzt ein zylindrisches Loch mit Senkung und entspricht gängigen Spannsystemen; für die korrekte Passform sollte die Kompatibilität mit dem Fräskörper geprüft werden. Welche Vorteile bietet die Trigon-Form? Die Trigon-Form ermöglicht mehrere Schneidkanten pro Platte und sorgt durch den 80° Keilwinkel für gute Stabilität bei kleinen axialen Zustellungen und hohen Vorschüben. Welche Anwendungen deckt die DoFeed-Modellserie ab? Die DoFeed-Serie ist auf Hochvorschubfräsen ausgelegt und eignet sich besonders für Taschen- und Planbearbeitung mit großen Zeitspanvolumina bei geringen axialen Eingriffen. Welche Rolle spielt der Eckenradius 2,5 mm? Ein Eckenradius von 2,5 mm verbessert die Robustheit der Schneidkante, reduziert Mikrobruch und eignet sich für das spanende Fräsen von mittel- bis grobspanenden Werkstoffen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT 090725 T9215 Wendeplatten - Tungaloy
WPMT 090725 T9215 Wendeschneidplatte für Fräsen — Tungaloy WPMT090725ZPL-ML T9215 ist eine Trigon-Wendeschneidplatte für Hochvorschubfräsen, entwickelt für hohe Zeitspanvolumina bei kleinen axialen Zustellungen Trigon-Platte mit 2,5 mm Eckenradius für stabile Schnitte CVD-beschichtetes Hartmetall T9215 für mittlere Stahlbearbeitung Optimiert für Hochvorschubfräsen, Taschen- und Planbearbeitung Mit zylindrischem Loch und einseitiger Senkung für sicheren Sitz Systemkompatibel mit Fräskörpern und passenden Schrauben Produktives Hochvorschubfräsen für erhöhte Durchsatzraten Die DoFeed-Modellserie ist speziell auf das Hochvorschubfräsen ausgerichtet und erlaubt die Nutzung großer Zeitspanvolumina bei geringen axialen Zustellungen. Das Resultat ist ein messbar höherer Durchsatz bei gleichbleibender Schnittqualität, da die Geometrie der Wendeschneidplatte die Spanbildung stabilisiert. Dadurch reduziert sich die Stillstandszeit durch Werkzeugwechsel, was besonders in der Serienfertigung den Output verbessert. Langlebigkeit durch robuste Beschichtung und Schneidstoffauswahl Die Sorte T9215 kombiniert CVD-Technologie mit einem verschleißfesten Hartmetall-Träger und bietet dadurch erhöhte Standzeit und Bruchsicherheit bei kontinuierlichem bis leicht unterbrochenem Schnitt. CVD (Chemical Vapor Deposition) beschreibt eine dünne, hartstoffbeschichtete Oberfläche, die den Verschleißwiderstand verbessert und somit konstante Bearbeitungsergebnisse über längere Laufzeiten ermöglicht. Praktische Einsatzfelder und klare Zielgruppenorientierung Die Wendeschneidplatte eignet sich für Taschenbearbeitung und Planbearbeitung ebenso wie für allgemeines Hochvorschubfräsen in der mittleren Stahlbearbeitung. Anwender aus dem Bereich Serienfertigung, Lohnfertigung und Lieferanten von funktionalen Bauteilen profitieren von der Kombination aus Produktivität und Zuverlässigkeit. Die Schneidstoffwahl und der Spanbrecher ML gewährleisten dabei gute Spanabfuhr und Prozesssicherheit. Systemintegration und einfache Handhabung im Maschinenpark Das angebotene System besteht aus Fräskörper, passenden Wendeschneidplatten und den erforderlichen Schrauben, wodurch der Einbau im bestehenden Werkzeughalter unkompliziert erfolgt. Die Trigon‑Plattenform sorgt für formstabile Auflageflächen, das zylindrische Loch mit einseitiger Senkung gewährleistet sicheren Sitz und Wiederholgenauigkeit beim Wechsel. So werden Rüstzeiten reduziert und die Maschinenverfügbarkeit erhöht. Empfehlung: Für effizientes Hochvorschubfräsen die WPMT090725ZPL-ML T9215 von Tungaloy anfragen; technische Rückfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6774053 Hersteller: Tungaloy Serie: DoFeed Bezeichnung: WPMT090725ZPL-ML T9215 SKU: TUN6774053 Einsatz: Fräsen Daten Radius: 2.5 mm Plattendicke: 7,94 mm Winkel: 80° Freiwinkel: 11° Plattengröße: 09 Besonderheiten Material: Hartmetall Beschichtung: T9215 (CVD-beschichtet) Schneidstofftyp: CVD-beschichtetes Hartmetall (hoher Verschleißwiderstand) Spanbrecher: ML Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: trigon Modellserie: DoFeed Typische Anwendung: Hochvorschubfräsen, Taschen- und Planbearbeitung Systemaufbau: Fräskörper, passende Wendeschneidplatten und Schrauben FAQ Was unterscheidet die WPMT090725ZPL-ML T9215 von anderen Wendeschneidplatten? Die WPMT090725ZPL-ML T9215 bietet durch die Kombination aus CVD-Beschichtung und Trigon‑Form eine besonders stabile Spanbildung und ist auf hohe Zeitspanvolumina bei kleinen axialen Zustellungen abgestimmt, was sie für Hochvorschubfräsen prädestiniert. Für welche Werkstoffe ist die Platte geeignet? Die Sorte T9215 wurde als erste Wahl für die mittlere Stahlbearbeitung formuliert; sie verbindet hohen Verschleißwiderstand mit Bruchsicherheit und eignet sich für kontinuierliche bis leicht unterbrochene Schnitte. Wie verbessert der Spanbrecher ML die Bearbeitung? Der Spanbrecher ML sorgt für eine kontrollierte Spanform und erleichtert die Spanabfuhr, was die Prozesssicherheit erhöht und die Oberflächengüte der bearbeiteten Bauteile verbessert. Ist die Platte kompatibel mit Standard‑Fräskörpern? Ja, die WPMT090725ZPL-ML ist für den Einsatz im Systemaufbau mit Fräskörpern, passenden Wendeschneidplatten und Schrauben ausgelegt und verfügt über ein zylindrisches Loch mit einseitiger Senkung für sicheren Sitz. Welche Vorteile bringt die Trigon‑Plattenform? Die Trigon‑Plattenform bietet eine formstabile Auflagefläche, hohe Schneidkantendicke und somit verbesserte Stabilität bei hohen Vorschüben, was die Standzeit und Wiederholgenauigkeit unterstützt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT 090725 T9225 Wendeplatten - Tungaloy
Benefit from a combination of high material removal rates and a robust, CVD‑coated carbide grade for stable chip formation and reliable mid‑to‑heavy steel machining; order the WPMT090725ZPR‑ML T9225 directly via Metav Werkzeuge or ask our consultants if needed. WPMT 090725 T9225 — Trigon indexable insert for milling by Tungaloy The WPMT090725ZPR‑ML T9225 is a trigon indexable insert engineered for high‑feed milling, offering large time‑chip volumes at small axial depths for pocketing and face machining. High‑feed DoFeed geometry for large removal rates CVD‑coated carbide grade T9225 for robust performance Trigon insert, 80° approach angle, 2.5 mm radius Boosted productivity with DoFeed high‑feed geometry The DoFeed model series is developed specifically for high‑feed milling, where large material removal rates are required with only shallow axial engagement. By combining a low axial depth with a generous radial engagement, the insert achieves high efficiency per pass while reducing the need for multiple deep cuts. This geometry shortens cycle times and lowers fixture loading, making it particularly suitable for pocket milling and face operations where throughput is critical. Reliable performance from the CVD‑coated carbide grade T9225 The CVD‑coated T9225 grade is a universal, robust solution for mid‑to‑heavy steel machining, selected for applications with variable engagement or light interruptions that demand extra toughness. The CVD‑coated surface improves wear resistance and thermal stability, while the substrate provides the necessary fracture toughness for interrupted cuts. Together, these properties deliver consistent tool life and predictable component quality under demanding shopfloor conditions. Secure seating, chip control and cutting geometry that matters The trigon form with an 80° approach angle and a 2.5 mm corner radius offers a blend of rigidity and versatility for a wide range of milling tasks. The insert features an ML chipbreaker to manage swarf and promote stable evacuation during high material removal. A cylindrical hole with a single‑sided countersink (40°–60°) ensures positive clamping and repeatable seating in compatible toolholders. With a plate thickness of 7.94 mm and size designation 09, the insert provides the stiffness required for heavier radial engagements. System compatibility and shopfloor advantages Supplied as part of a system comprising the milling body, matching indexable inserts and fastening screws, this trigon insert integrates into common tooling platforms for efficient changeovers. The combination of geometrical stability, chip control and the T9225 grade reduces unplanned downtime and simplifies tool inventory management. For complex applications or parameter optimisation, Metav Werkzeuge offers technical advice and can assist with selecting the appropriate holder and cutting data for a safe, productive process. Contact Metav Werkzeuge for original Tungaloy WPMT090725ZPR‑ML inserts and tailored high‑feed milling solutions — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6781353 Manufacturer SKU: TUN6781353 SKU: 6781353-Tungaloy Numbers / core technical data Corner radius: 2.5 mm Plate thickness: 7.94 mm Approach angle: 80° Relief angle (free angle): 11° Plate size: 09 Designs / special features Designation: WPMT090725ZPR‑ML Model series: DoFeed Shape: trigon Chipbreaker: ML Coating: CVD‑coated Material: carbide Hole: with cylindrical hole + single‑sided countersink (40°–60°) Typical application: milling (high‑feed, pocketing, face machining) FAQ Which materials is this insert suitable for? The WPMT090725ZPR‑ML T9225 trigon insert by Tungaloy is optimised for mid‑to‑heavy steel machining; the robust T9225 grade and CVD coating also tolerate variable engagements and light interruptions common in steel work. What are the typical applications for this insert? Typical uses include high‑feed milling, pocketing and face machining where large time‑chip volumes are required at low axial depths; the DoFeed geometry supports efficient material removal in these operations. How does the ML chipbreaker improve machining? The ML chipbreaker promotes consistent chip segmentation and evacuation during heavy radial engagement, helping to maintain surface finish and reduce recutting of swarf when using the WPMT090725ZPR‑ML insert. How is the insert clamped and aligned in the holder? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping and repeatable seating; it is intended to be mounted in compatible DoFeed milling bodies with matching screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WPMT080615 080615 AH140 Wendeplatten - Tungaloy
WPMT080615 080615 AH140 Wendeplatte für Fräsen von Tungaloy Die WPMT080615 AH140 Wendeplatte ist eine Hochvorschub-Fräskarte im Trigon-Format, entwickelt für effizientes Fräsen, Taschen- und Planbearbeitung mit hoher Prozesssicherheit Hochvorschub-Fräsfamilie für große Zeitspanvolumina PVD-beschichtetes Hartmetall für lange Standzeit Trigonplatte mit 80° Winkel und 1,5 mm Radius Mit Loch und einseitiger Senkung für sichere Spannlage Einseitiger Spanbrecher für kontrollierte Spanbildung Höhere Produktivität bei Hochvorschub Die WPMT080615 AH140 liefert messbaren Produktivitätsgewinn bei Hochvorschubfräsen durch optimierte Spanvolumenaufnahme und geringe axiale Zustellung. Die Kombination aus stabilem Spanformer und scharfer Schneidkante reduziert Nachbearbeitung und erhöht Taktzeiten. Anwender profitieren von konstanter Bearbeitungsqualität bei Taschen- und Planbearbeitung, wodurch Rüstzeiten insgesamt effektiver genutzt werden können. Beschichtung und Material sichern Prozessstabilität Die PVD-beschichtete AH140-Sorte steht für verschleiß- und ausbruchfeste Performance bei anspruchsvollen Fräsprozessen. Das Hartmetall-Substrat in Verbindung mit der Beschichtung sorgt für eine belastbare Schneidkante und verlängerte Einsatzintervalle. Für Betriebe bedeutet das weniger Werkzeugwechsel und kalkulierbare Standzeit, was die Wirtschaftlichkeit der Fertigung verbessert. Konkrete Einsatzfelder und Anwendernutzen Entwickelt für das Fräsen, eignet sich die Platte besonders für Anwender, die große Zeitspanvolumina bei kleinen axialen Zustellungen bearbeiten. Die Trigonform mit 80° Winkel ermöglicht vielseitige Einsatzmöglichkeiten auf konventionellen und hochproduktiven Fräsmaschinen. Die Wendeplatte ist ideal für Werkstätten und Serienfertiger, die hohe Prozesssicherheit und reproduzierbare Oberflächengüten erwarten. Handhabung, Fixierung und Schnittkomfort Die Ausführung mit zylindrischem Loch und einseitiger Senkung (40°–60°) gewährleistet eine zuverlässige Spannlage und einfache Montage am Fräskörper. Der einseitige Spanbrecher unterstützt kontrollierte Spanformung, reduziert Wärmeentwicklung und trägt zur Oberflächenqualität bei. Die Plattendicke von 6,35 mm bietet dabei ausreichend Stabilität für wiederholgenaue Prozesse. Empfehlung: Für hochproduktive Hochvorschubfräsungen die WPMT080615 AH140 Wendeplatte von Tungaloy einsetzen; bei Fragen Technik- und Bestellberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6821769 Marke: Tungaloy Serie: DoFeed Bezeichnung: WPMT080615 Hersteller SKU: TUN6821769 Daten Eckenradius: 1,5 mm Winkel: 80° Freiwinkel: 11° Plattendicke: 6,35 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Sorte/Beschichtung: AH140 (verschleiß- und ausbruchsfeste Sorte) Schneidstofftyp: PVD-beschichtetes Hartmetall Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Fräsen, Hochvorschub-Fräsfamilie für große Zeitspanvolumina bei kleinen axialen Zustellungen FAQ Welche Hauptanwendungen deckt die WPMT080615 ab? Die WPMT080615 AH140 Wendeplatte von Tungaloy ist für Hochvorschubfräsen, Taschen- und Planbearbeitung ausgelegt und eignet sich für Anwendungen mit großen Zeitspanvolumina bei geringen axialen Zustellungen. Für welche Werkstoffe ist die Platte geeignet? Die PVD-beschichtete AH140-Sorte erlaubt den Einsatz auf einer breiten Werkstoffpalette; sie wurde für verschleißarme und ausbruchfeste Bearbeitung konzipiert. Wie beeinflusst der einseitige Spanbrecher die Bearbeitung? Der einseitige Spanbrecher fördert eine kontrollierte Spanbildung, reduziert Wärmeentwicklung und unterstützt eine konstante Oberflächengüte bei Hochvorschubprozessen. Welche Spann- und Montagevorteile bietet die Ausführung mit Loch? Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sichere Fixierung auf dem Fräskörper und erleichtert die Wiederholgenauigkeit beim Plattenwechsel. Welche Serie und Ausführung sollte gewählt werden für hohe Zeitspanvolumina? Die DoFeed-Modellserie mit der WPMT080615 AH140 ist speziell für große Zeitspanvolumina bei kleinen axialen Zustellungen entwickelt worden und bietet daher hohe Prozesssicherheit für diese Anforderungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT080615 080615 T3130 Wendeplatten - Tungaloy
Take advantage of the DoFeed high‑feed geometry and the wear‑resistant T3130 carbide grade to boost material removal rates with minimal axial engagement; the triangular 08 form with 1.5 mm corner radius and secure hole fixation ensures consistent edge stability and reliable chip control — order directly via Metav Werkzeuge or consult the team for tailored recommendations. WPMT 080615 T3130 indexable insert for high‑feed milling (DoFeed) by Tungaloy — triangular 08, 1.5 mm radius WPMT 080615 T3130 is a triangular indexable insert designed for high‑feed milling, optimised to remove large time‑volume of material at small axial depths and to deliver stable, repeatable performance in pocketing and face milling. DoFeed high‑feed geometry for efficient material removal Cemented carbide grade T3130 for edge stability Triangular 08 insert with 1.5 mm corner radius Cylindrical hole with one‑side countersink 40°–60° High‑feed performance that raises throughput without extra passes The DoFeed model family is engineered for productive high‑feed milling where throughput matters. The insert's geometry converts shallow axial cuts into high material removal per time, reducing cycle times in pocketing and face operations. With the T3130 cemented carbide, the insert balances wear resistance and toughness, so cutting edges remain more consistent over longer runs. This translates into fewer indexings, less machine downtime and a more predictable production rhythm for job shops and production lines alike. Geometry that improves stability and surface quality A triangular 08 form combined with a 1.5 mm corner radius offers a compromise between strength and versatility: the modest radius supports stable cutting edges and good corner durability while still enabling precise pocket contours. The 11° clearance angle and 6.35 mm plate thickness enhance rigidity at the cutting zone, reducing vibration and improving surface finish. These measurable geometry choices mean faster set‑up validation and more reliable parameter transfer between similar jobs. Secure clamping and chip control for consistent results The insert features a cylindrical hole with a single‑side countersink (40°–60°) for positive seating and repeatable clamping; the single‑sided chipbreaker promotes controlled swarf formation on the preferred cutting edge. Made from cemented carbide and supplied in the DoFeed system format, the component integrates with matching cutter bodies and clamping screws to provide a complete, application‑oriented solution. Typical uses include high‑feed milling, pocketing and face milling in diverse materials where balance between productivity and tool life is required. For further technical data or to confirm suitability for a specific material, contact the Metav Werkzeuge technical team at info@metav-werkzeuge.com or +49 2822 7131930. For dependable high‑feed milling performance, specify the Tungaloy WPMT 080615 T3130 insert from Metav Werkzeuge — enquiries and orders can be directed to Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6853865 Manufacturer SKU: TUN6853865 Our SKU: 6853865-Tungaloy Facts Corner radius: 1.5 mm Insert size: 08 Plate thickness: 6.35 mm Clearance angle: 11° Included hole/countersink: cylindrical hole + one‑side countersink 40°–60° Wedge/approach angle: 80° Special features Model series: DoFeed — high‑feed milling family Material: cemented carbide Grade/coating: T3130 Insert shape: triangular (trigon) Chipbreaker: single‑sided System: insert for milling cutter bodies with matching screws FAQ What applications suit this insert best? The WPMT 080615 T3130 indexable insert from Tungaloy is aimed at high‑feed milling operations such as pocketing and face milling where large time‑volume removal is needed with small axial cuts. Which materials can be machined with this insert? The T3130 cemented carbide grade is developed for a broad range of milling tasks; the WPMT 080615 T3130 insert performs reliably on common steels and mixed production batches where a balance of wear resistance and toughness is required. How does the hole and countersink affect mounting? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure seating and repeatable clamping in the cutter body, improving stability and reducing the risk of micro‑movement during operations with the WPMT 080615 T3130 insert (SKU 6853865‑Tungaloy). What advantages does the DoFeed geometry deliver? DoFeed geometry converts shallow axial engagement into high material removal per pass, lowering cycle times and enabling more productive milling cycles while maintaining acceptable surface quality with the Tungaloy insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WPMT080615 AH3135 Wendeplatten - Tungaloy
WPMT 080615 AH3135 Wendeschneidplatte für Fräsen · Tungaloy Die WPMT 080615 AH3135 ist eine trigonförmige Wendeplatte für Hochvorschub-Fräsen, entwickelt für große Zeitspanvolumina bei kleinen axialen Zustellungen und für sichere Schneidkantenführung. Hohe Prozesssicherheit durch AH3135-Sorte PVD-beschichtetes Hartmetall für lange Standzeit Optimierte Spanbildung bei Hochvorschub Trigonform für stabile Lagerung und Schnittführung Mit zylindrischem Loch und Senkung 40°–60° Effiziente Spanabfuhr und wirtschaftlicher Einsatz Die WPMT080615ZPR-ML AH3135 kombiniert PVD-beschichtetes Hartmetall mit einem speziellen ML-Spanformer, der die Spanabfuhr beim Hochvorschub-Fräsen deutlich verbessert. Durch die gezielte Spanformung reduziert sich die Neigung zu Ausbrüchen an der Schneidkante, was die Werkzeugstandzeit erhöht und die Produktionskosten senkt. Anwender profitieren von gleichbleibender Bearbeitungsqualität bei hoher Zerspanleistung. Breite Werkstoffabdeckung und typische Einsatzfelder Die Platte ist ausgelegt für das Fräsen in vielfältigen Anwendungen wie Hochvorschubfräsen, Taschenbearbeitung und Planbearbeitung. Die Kombination aus scharfer Schneidkante und verschleißfester Sorte macht sie geeignet für abrasive und zähere Werkstoffe. Dadurch eignet sich die Platte besonders für Serienfertigung, bei der konstante Ergebnisse und niedrige Ausfallraten gefordert sind. Konstruktion, Maße und Schneidkantenschutz Die trigonförmige Plattenform mit einem Eckenradius von 1,5 mm und einem Freiwinkel von 11° sorgt für sichere Einspannung und gleichmäßige Kraftverteilung. Die Plattendicke von 6,35 mm und das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglichen stabile Befestigung und einfache Austauschbarkeit im Fräskörper. Solide Konstruktion führt zu reproduzierbarer Schnittgeometrie und reduziert Maschinenstillstandzeiten. Herstellerkonzept und Prozessvorteile in der Fertigung Die Modellserie DoFeed fokussiert auf Hochvorschub-Fräsfamilien, die große Zeitspanvolumina bei kleinen axialen Zustellungen realisieren. Die Sorte AH3135 ist verschleiß- und ausbruchfest ausgelegt und liefert eine scharfe Schneidkante bei gleichzeitiger Prozesssicherheit. Für Anwender bedeutet das: höhere Produktivität pro Werkzeug und weniger Nacharbeit durch verbesserte Oberflächengüten. Empfehlung: Die AH3135-Wendeplatte von Tungaloy gezielt für produktives Hochvorschub-Fräsen über Metav Werkzeuge anfragen; technische Beratung und Schnittdaten unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 6774968 Marke: Tungaloy Serie: DoFeed Bezeichnung: WPMT080615ZPR-ML AH3135 Daten Radius: 1,5 mm Winkel: 80° Freiwinkel: 11° Plattendicke: 6,35 mm Plattengröße: 08 SKU Hersteller: TUN6774968 Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtet Hartmetall Sorte: AH3135 Spanbrecher: ML Plattenform: trigon Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Fräsen Einsatz der Modellserie: Hochvorschub-Fräsfamilie für große Zeitspanvolumina bei kleinen axialen Zustellungen Typische Anwendung: Hochvorschubfräsen, Taschen- und Planbearbeitung FAQ Welche Hauptanwendungen deckt die Wendeplatte ab? Die Wendeplatte von Tungaloy für Fräsen mit der Bezeichnung WPMT080615ZPR-ML AH3135 ist primär für Hochvorschubfräsen sowie Taschen- und Planbearbeitung ausgelegt und bietet dank AH3135-Sorte hohe Prozesssicherheit. Für welche Werkstoffe eignet sich die Platte besonders? Die AH3135-Sorte ist verschleiß- und ausbruchfest konzipiert und eignet sich für eine breite Werkstoffabdeckung beim Fräsen, besonders dort, wo scharfe Schneidkanten und konstante Ergebnisse gefragt sind. Welche Vorteile bietet der ML-Spanformer? Der ML-Spanformer verbessert die Spanabfuhr und reduziert Ausbrüche an der Schneidkante, was zu längeren Standzeiten und gleichbleibender Oberflächenqualität bei Hochvorschub führt. Wie wird die Wendeplatte befestigt und gewechselt? Die trigonförmige Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°) für stabile Befestigung und einfache Montage im passenden Fräskörper; Artikelnummer 6774968 dient als Referenz. Kann Metav Werkzeuge bei Schnittdaten helfen? Ja, Metav Werkzeuge bietet technische Unterstützung für die Anwendung der Wendeplatte WPMT080615ZPR-ML AH3135; Kontakt über info@metav-werkzeuge.com oder +49 2822 7131930. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WPMT080615ZSR 080615 T3130 Wendeplatten - Tungaloy
Benefit from the combination of DoFeed high-feed geometry and the T3130 carbide grade for robust performance and efficient material removal; order directly via Metav Werkzeuge or consult our technical advisors for tailored application support. WPMT080615ZSR T3130 — Indexable insert for milling, trigon 80° cutting angle (Tungaloy) WPMT080615ZSR T3130 is a trigon indexable insert engineered for high-feed milling and pocketing, delivering large material removal at small axial depths with a balanced focus on wear resistance and edge stability. DoFeed high-feed geometry for large material removal T3130 carbide grade for wear resistance and toughness Trigon form with 80° cutting angle and 1.5 mm radius Countersunk hole and 6.35 mm plate thickness for secure clamping Maximising throughput with high-feed geometry The DoFeed family is designed specifically for high-feed milling operations, where large material removal must be achieved with minimal axial engagement. The insert’s geometry reduces cutting forces while maintaining high metal removal rates, which supports shorter cycle times and improved productivity on milling machines. Integrating this insert into a compatible milling body allows manufacturers to exploit the efficiency of shallow axial cuts without compromising on stability. The combination of the high-feed profile and the single-sided chipbreaker helps to control chips and maintain consistent cutting conditions during prolonged roughing cycles. Robust grade and edge stability for consistent results The T3130 carbide grade is formulated to balance wear resistance, toughness and edge stability, making it suitable for demanding milling tasks that require both durability and repeatable performance. A corner radius of 1.5 mm reinforces the cutting edge for heavy engagement, while the carbide substrate provides thermal and mechanical strength under continuous cutting loads. This results in longer tool life and fewer insert changes, which lowers tooling costs and reduces machine downtime. The grade’s tailored properties ensure a predictable wear pattern, aiding process planning and reproducible surface quality. Secure clamping and practical design for workshop use The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure mechanical clamping, paired with a 6.35 mm plate thickness that contributes to rigidity in the toolholder. The trigon shape and 80° cutting angle offer a robust balance between shear strength and accessibility in pocket and face milling. The product is supplied as part of a system comprising the milling body, matching indexable inserts and fastening screws, simplifying replacement and inventory management. The WPMT080615ZSR T3130 insert’s combination of geometry and material makes it well suited for high-feed roughing and pocket machining where stable cutting and reliable clamping are essential. Contact Metav Werkzeuge for machining recommendations or to order Tungaloy high-feed inserts—our technical team is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6853866 Manufacturer's SKU: TUN6853866 SKU: 6853866-Tungaloy Model series: DoFeed Application: Milling Material: Carbide Product name: WPMT080615ZSR T3130 Manufacturer: Tungaloy Core dimensions ISO designation: 080615 Insert size: 08 Plate thickness: 6.35 mm Corner radius: 1.5 mm Relief angle: 11° Cutting angle: 80° Special features Trigon plate form Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) DoFeed high-feed family for large material removal with small axial depths Carbide grade T3130 optimised for milling Suitable for high-feed roughing, pocket and face milling System comprising milling body, matching inserts and fastening screws FAQ What machining operations is this insert designed for? The WPMT080615ZSR T3130 is designed for high-feed milling operations including pocketing and face milling, where large material removal is required at small axial depths. How does the T3130 grade affect performance? The T3130 carbide grade in the WPMT080615ZSR T3130 provides a balance of wear resistance and toughness that promotes stable cutting and longer insert life under roughing conditions. What clamping features ensure insert security? The insert includes a cylindrical hole with a one-sided countersink (40°–60°) and a 6.35 mm plate thickness to enable secure clamping in compatible milling bodies, reducing the risk of loosening during heavy cuts. Which edge geometry is supplied and what is its benefit? The WPMT080615ZSR T3130 has a trigon form with an 80° cutting angle and a 1.5 mm corner radius, offering robust edge strength for heavy engagement and improved tool life during roughing. Is this insert compatible with standard milling systems? The insert is supplied as part of a system that includes the milling body, matching inserts and screws; the WPMT080615ZSR T3130 is compatible with holders designed for DoFeed trigon plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XCET 310404 AH120 Wendeplatten - Tungaloy
Take advantage of the proven combination of DoFeed high‑feed performance and the AH120 PVD‑coated carbide grade for consistent metal removal rates with low axial depths; this results in shorter cycles and reliable edge stability. Order genuine Tungaloy parts via Metav Werkzeuge or ask their consultants for application support. XCET310404 AH120 indexable insert for milling (DoFeed) by Tungaloy A XCET310404 AH120 indexable insert designed for high‑feed milling, pocket and face machining where large chip volumes are desired with small axial cuts DoFeed high‑feed milling family PVD‑coated AH120 carbide grade Sharp cutting edge with process security Cylindrical hole with single‑side countersink Boosted productivity with high‑feed milling The DoFeed family is engineered to raise the material removal rate while keeping axial depths low, so cycle times are reduced without compromising stability. The insert’s geometry supports large time‑span volumes during each pass, making it suitable for repetitive pocketing and face operations on milling centres. This translates into measurable productivity gains and fewer passes per component for stable batch production. Robust edge quality and wear resistance The AH120 PVD‑coated carbide provides a wear‑ and chip‑resistant cutting edge that maintains sharpness under demanding conditions. The grade balances toughness and hardness to reduce edge breakdown and maintain surface quality across longer runtimes. As a result, process consistency is improved and unplanned reworking becomes less likely, which supports tighter production schedules. Practical design for secure clamping and chip control The insert’s special plate shape includes a cylindrical hole with single‑side countersink (40°–60°) and a single‑sided chipbreaker, enabling reliable seating and effective chip evacuation when combined with the matching milling body and fixing screws. The corner radius 0.4 mm and plate thickness 4.76 mm contribute to predictable engagement and controlled cutting forces, reducing vibration and improving surface finish on the workpiece. Versatile use and system compatibility As part of the DoFeed system, the insert is intended for high‑feed milling, pocketing and face milling in machining cells and production lines where stable, repeatable cuts are required. The system approach—milling body, compatible indexable inserts and screws—ensures rapid replacement and straightforward tool management. For applications requiring a robust cutting edge and dependable process security, this insert offers a balance of performance and reliability. Contact Metav Werkzeuge for tailored application advice or to secure genuine Tungaloy inserts with SKU TUN6849641 Technical data Article number: 6849641 Manufacturer SKU: TUN6849641 Product SKU: 6849641-Tungaloy Model series: DoFeed Designation: XCET310404 AH120 Core specifications Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 31 mm Clearance angle: 7° ISO designation: 310404 Special features Coating: PVD Grade: AH120 PVD‑coated carbide Chipbreaker: single‑sided Hole style: cylindrical hole with single‑side countersink 40°–60° Plate shape: special Application: high‑feed milling, pocket and face machining System composition: milling body, compatible indexable inserts and screws FAQ What machining tasks is this insert suited for? The insert is designed for high‑feed milling, particularly for pocketing and face machining where large chip volumes are required with small axial depths; this suits production and jobbing environments. How does the AH120 grade affect performance? The AH120 PVD‑coated carbide offers wear and chip resistance while preserving a sharp cutting edge, delivering process security and consistent surface quality during extended running. How is the insert secured in the milling body? The XCET310404 insert features a cylindrical hole with a single‑side countersink and is mounted into a purpose‑built DoFeed milling body using the corresponding screws to ensure firm seating and repeatable positioning. What are the key geometry values to note? Important dimensions include a corner radius of 0.4 mm, plate thickness of 4.76 mm and a clearance angle of 7°, which together influence engagement, cutting forces and surface finish. Is this insert part of a system? Yes, the insert belongs to the DoFeed high‑feed family and is intended for use with matching milling bodies, compatible indexable inserts and fixing screws for a complete tooling solution. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XCET 310404 AH3135 Wendeplatten - Tungaloy
Take advantage of the combination of high‑feed DoFeed geometry, PVD‑coated AH3135 carbide and secure mounting for a reliable, productive milling process. Order the indexable insert directly via Metav Werkzeuge or consult the team for application support. XCET310404 AH3135 – Indexable insert for milling (DoFeed high‑feed, PVD‑coated), Tungaloy The XCET310404 AH3135 is an indexable insert developed for high‑feed milling and pocket operations, delivering large material removal per unit time with minimal axial immersion for efficient cycle times. DoFeed high‑feed geometry PVD‑coated AH3135 carbide 0.4 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Maximise removal rates while keeping axial loads low The DoFeed family is engineered to enable high‑feed milling with shallow axial depths, meaning parts can be machined faster without excessive spindle loads. The PVD‑coated AH3135 grade provides a wear‑ and fracture‑resistant cutting edge, which translates into fewer indexings and steadier productivity over long runs. For machinists aiming to reduce cycle time, the combination of high radial engagement and small depth of cut reduces cutting forces while increasing metal removal rate, improving throughput on pocketing and face‑milling tasks. Consistent edge life and secure clamping for process security A sharp, stable edge is essential for interruption‑free production; the insert’s geometry and the single‑sided chipbreaker promote predictable chip control and help avoid built‑up edge. The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure, repeatable clamping in the tool holder, while the modest corner radius (0.4 mm) balances surface finish with strength at the cutting edge. These factors increase process security, reduce the risk of unexpected tool failure and support repeatable results across batches. Practical integration and machining guidance for shops This insert integrates into a three‑piece system of body, matched indexable inserts and screws; its special plate form and 4.76 mm thickness offer mechanical stability under heavy radial engagement. For standard practice, favour larger radial cuts with limited axial depth to exploit the DoFeed concept, and select cutting data that emphasises steady chip evacuation. The result is a more economical operation: fewer tool changes, consistent surface quality and reliable tool life for serial production or single‑piece flow. For tailored recommendations on tooling set‑up and to obtain Tungaloy high‑feed inserts, contact Metav Werkzeuge for expert advice and procurement assistance. Technical data Article number: 6774989 Manufacturer: Tungaloy SKU: 6774989-Tungaloy Manufacturer SKU: TUN6774989 Core dimensions Insert designation: XCET310404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 31 mm Relief angle: 7° Countersink angle: 40°–60° Designs / Special features PVD‑coated carbide AH3135 DoFeed high‑feed family for large time‑material removal Cylindrical hole with one‑sided countersink Single‑sided chipbreaker Special plate form Intended application: milling (high‑feed, pocketing, face milling) FAQ Which machining tasks suit this insert best? The XCET310404 AH3135 insert from Tungaloy is designed for high‑feed milling, pocketing and planing operations where large time‑material removal is desired with small axial depths. What advantages does the AH3135 grade provide? The AH3135 PVD‑coated carbide offers wear and fracture resistance, combining a sharp cutting edge with reliable performance under interrupted or heavy cutting conditions in the XCET310404 AH3135 insert. How is the insert fastened to the cutter body? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) to ensure secure clamping and repeatable positioning in compatible tool bodies; see SKU 6774989‑Tungaloy for ordering details. Is the corner radius suitable for finishing? With a 0.4 mm corner radius, the insert balances surface quality and edge strength, making it suitable for semi‑finishing and applications where a fine surface is required without compromising durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
XCET 310404 AH330 Wendeplatten - Tungaloy
Benefit from high-feed productivity, PVD-coated AH330 wear resistance and secure clamping that supports stable, repeatable milling processes; order the XCET310404ER AH330 inserts directly via Metav Werkzeuge or ask our consultants for application-specific advice. XCET 310404 AH330 indexable insert — DoFeed high-feed milling, Tungaloy The XCET310404ER AH330 is a high-feed indexable insert designed for milling applications, optimised for large time‑chip volumes at small axial depths and suited to pocketing and face milling. DoFeed high-feed geometry for large material removal PVD-coated AH330 carbide for wear resistance Single-sided chipbreaker for stable chip control Cylindrical hole with 40°–60° countersink for secure clamping Higher throughput with minimal axial engagement The DoFeed geometry of this insert allows effective material removal with very small axial depths, converting modest cutting depths into high volumetric productivity. The PVD-coated AH330 grade on a carbide substrate provides a combination of edge sharpness and resistance to flank wear, so the tool life remains consistent across extended runs. The special plate shape and the relatively robust 4.76 mm plate thickness contribute to torsional stability, reducing the risk of edge chipping during interrupted cuts and ensuring predictable cycle times in production. Secure clamping and consistent surface finish Mechanical retention is achieved via a cylindrical hole with a one-sided countersink (40°–60°), which ensures reliable seating and repeatable positioning in the milling body. The single-sided chipbreaker promotes uniform chip formation and evacuation, which helps to prevent built-up edge and heat concentration. A 0.4 mm corner radius balances edge strength and surface quality, offering improved wear resistance while maintaining the capability to produce clean pocket and face surfaces with minimal rework. Practical application guidance and machining advantages Optimised for high-feed milling, this insert performs particularly well in pocketing and face-milling operations where process security and throughput are priorities. The chipformer geometry reduces the tendency for long, stringy chips and supports stable cutting when paired with a suitable milling body and clamping screw set. For users less familiar with coatings: PVD (physical vapour deposition) equips the cutting edge with a thin, hard layer that improves abrasion resistance without compromising the substrate toughness, making the grade especially suitable where a sharp edge and reliable performance are required. For process-secure high-feed milling with AH330 performance, contact Metav Werkzeuge to confirm suitability and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: 6811536 Manufacturer SKU: TUN6811536 Designation: XCET310404ER AH330 Model series: DoFeed Application: Milling Material: Carbide Coating / grade: AH330 (PVD-coated) System composition: milling body, matching inserts and screws Facts Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 7° Plate size: 31 mm Special features High-feed geometry for large time‑chip volumes Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Special plate form With hole Suitable for pocketing and face milling Sharp cutting edge for process security FAQ What machining tasks is this insert intended for? The XCET310404ER AH330 is primarily intended for high-feed milling, including pocketing and face milling, where large material removal with small axial depths is required. What material and coating does the insert use? The insert is manufactured from carbide and features a PVD-coated AH330 grade designed for wear resistance and reduced edge breakout. What are the key dimensional features for tool setup? Key dimensions include a 4.76 mm plate thickness, 0.4 mm corner radius and a 7° clearance angle; the plate diameter is 31 mm. How is the insert clamped in the milling body? Clamping is via a cylindrical hole with a one-sided countersink (40°–60°), providing secure seating and repeatable positioning in compatible DoFeed milling bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XCET 310404 NS740 Wendeplatten - Tungaloy
Take advantage of the DoFeed high‑feed concept together with the NS740 cermet grade to increase material removal with small axial depths while improving surface quality and dimensional stability. Order supplies via Metav Werkzeuge or consult the team for application-specific recommendations. XCET310404ER 310404 NS740 milling insert – DoFeed high‑feed series by Tungaloy A XCET310404ER NS740 insert engineered for high‑feed milling, optimised for pocketing and face machining with small axial depths and large chip volumes DoFeed high‑feed design for large chip volumes NS740 cermet grade for superior surface finish 0.4 mm corner radius for precise finishing Maximise removal rates with shallow axial cuts The DoFeed family is designed to deliver high material removal rates at small axial depths, converting multiple light passes into efficient, high‑feed operations. By using a shallow immersion depth combined with a robust cutting geometry, the system achieves consistent chip volume per engagement and reduces cycle time without excessive radial load. This approach is particularly suitable for pocketing and face milling where stability and repeatable material extraction are critical. The result is a measurable gain in productivity while maintaining process control. Achieve fine surface quality and dimensional stability with NS740 The NS740 grade, a cermet or coated cermet option, focuses on finishing and light machining of steel with emphasised surface quality and dimensional accuracy. The fine microstructure of the grade yields even wear and a stable cutting edge, which helps preserve tolerances over longer tool life. For users seeking improved part appearance and repeatability, this grade reduces the need for downstream finishing and supports reliable batch production. Selection of this grade therefore benefits both quality assurance and overall economics. Reliable seating, secure clamping and application details The insert is supplied in a special plate form with a plate size of 31 mm and a plate thickness of 4.76 mm, providing a stable seating surface for high‑feed applications. The 0.4 mm corner radius supports precise finishing passes, while the 7° relief angle aids chip evacuation and reduces rubbing. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and accurate repeatability in the milling body. A one‑side chipbreaker promotes controlled chip formation under the DoFeed cutting conditions. The system comprises the milling body, matching replaceable inserts and clamping screws to ensure straightforward assembly and repeatable set‑ups. Contact Metav Werkzeuge for tailored DoFeed tooling recommendations and quote referencing TUN6821581; the Metav team can advise on integration into existing toolholders and delivery options. Technical data Article number: 6821581 Manufacturer article number: 6821581 SKU: 6821581-Tungaloy Manufacturer SKU: TUN6821581 Manufacturer: Tungaloy Facts Plate size: 31 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Countersink angle: 40°–60° Designation: XCET310404ER Special features DoFeed high‑feed series for large chip volumes Cutting material: cermet / coated cermet Substrate material: carbide Plate form: special Hole type: cylindrical hole with single‑side countersink Chipbreaker: one‑side Typical application: milling, pocketing and face machining System composition: milling body, matching inserts and screws FAQ What applications suit this insert best? The XCET310404ER NS740 is designed for high‑feed milling, especially pocketing and face machining where small axial depths and large chip volumes are required. Can the NS740 grade handle light finishing of steel? Yes, the NS740 cermet grade is optimised for the finishing to light machining of steel with a focus on surface quality and dimensional stability. Which clamping features ensure repeatability? The XCET310404ER features a cylindrical hole with a single‑side countersink (40°–60°) and a robust plate thickness of 4.76 mm to ensure secure seating and repeatable clamping. Is this insert part of a complete system? The insert is part of the DoFeed system that includes the milling body, matching replaceable inserts and clamping screws for straightforward integration. What is the corner radius and how does it affect the finish? The corner radius is 0.4 mm; this radius supports precise finishing passes and contributes to improved surface appearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
XCET 310404 TH10 Wendeplatten - Tungaloy
Take advantage of a high‑feed solution that combines efficient material removal, a sharp uncoated cutting edge and robust seating for repeatable runs. The combination of the DoFeed system architecture, the TH10 uncoated cemented carbide grade and the secure hole‑and‑countersink design supports higher throughput and reliable set‑ups — order directly via Metav Werkzeuge or consult our technical advisors for specification support. XCET 310404 TH10 indexable insert for high‑feed milling (Tungaloy) XCET 310404 TH10 is a high‑feed indexable insert optimised for milling applications that demand large time‑material removal rates at small axial depths. High‑feed design for large material removal rates Uncoated cemented carbide grade TH10 0.4 mm corner radius for precise control Cylindrical hole with countersink for secure clamping Maximised productivity with minimal axial engagement The DoFeed family concept is geared towards machining strategies that favour high feed per tooth combined with shallow axial depths. The XCET310404ER TH10 insert delivers this workflow by pairing a geometry optimised for lateral cutting engagement with a sharp, uncoated cemented carbide grade. The result is reduced cutting forces, stable feed behaviour and shorter cycle times when performing pocketing, face milling and high‑feed passes. For process planners, the measurable outcome is a higher material removal rate per tool life interval, achieved without increasing axial immersion. Consistent surface quality and controlled chip formation The TH10 grade is specified as an uncoated cemented carbide engineered to preserve a keen cutting edge, which supports a clean surface finish in non‑ferrous and sensitive applications. The insert’s 0.4 mm corner radius offers a compromise between edge strength and profile fidelity, helping to maintain dimensional accuracy on trimmed edges. In addition, the single‑sided chipbreaker promotes predictable chip formation and evacuation, reducing the risk of built‑up edge and enabling consistent results across batch runs. Practical system integration for dependable production Designed as part of a coordinated system, the insert’s special form and the cylindrical hole with single‑side countersink (40°–60°) ensure positive seating and repeatable clamping in compatible DoFeed milling bodies. With a thickness of 4.76 mm and a nominal 31 mm size, the component integrates with minimal setup effort, supporting quick index changes and straightforward inventory management. The geometry and fixation concept together contribute to robust process stability and predictable tool‑life performance in industrial milling cells. Why this solution benefits process engineers For shops seeking to raise throughput without increasing machine dwell times, the combination of high‑feed geometry, TH10 uncoated carbide and secure clamping addresses core production aims: improved cycle times, repeatable set‑ups and reliable surface quality. The insert is particularly suitable where lower cutting forces and clean finishes are priorities, and where integrating into a DoFeed system yields the best overall return on tooling. For specification assistance or to order this Tungaloy high‑feed insert for DoFeed milling systems, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6837464 Manufacturer SKU: TUN6837464 SKU: 6837464-Tungaloy Label: XCET310404ER TH10 Model series: DoFeed Application: Milling Material: Cemented carbide Numbers / Core technical data ISO designation: 310404 Plate size: 31 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 7° Design features Uncoated cemented carbide, grade TH10 One‑sided chipbreaker Cylindrical hole + single‑side countersink (40°–60°) Special plate form For high‑feed milling family (DoFeed) FAQ What applications is this insert intended for? The insert is intended for high‑feed milling operations such as pocketing and face milling; the XCET310404ER TH10 is optimised for large time‑material removal at small axial depths. Which materials work best with the TH10 grade? The uncoated TH10 cemented carbide grade is suitable for non‑ferrous materials and applications where a sharp cutting edge reduces cutting forces and supports a clean surface finish. How does the clamping design affect repeatability? The cylindrical hole with a single‑side countersink (40°–60°) provides reliable seating and repeatable clamping in compatible DoFeed holders, improving positional accuracy across tool changes. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius balances edge strength and profile accuracy, reducing stress concentration while maintaining satisfactory dimensional control during finishing passes. Is this insert coated? No, this insert is supplied in an uncoated cemented carbide grade TH10 to preserve a sharp edge that lowers cutting forces and enhances surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XCET 310404 UX30 Wendeplatten - Tungaloy
XCET 310404 UX30 Tungaloy-Wendeplatte für Fräsen XCET 310404 UX30 Tungaloy-Wendeplatte bietet eine Hochvorschub-Lösung für effiziente Taschen- und Planbearbeitung in der Zerspanung Hochvorschub-Fräsfamilie für hohe Zeitspanvolumina UX30 unbeschichtetes Hartmetall mit scharfer Schneidkante Einseitiger Spanbrecher für kontrollierte Spanbildung Zylindrisches Loch mit Senkung 40°–60° Eckenradius 0,4 mm für präzise Konturtreue Effiziente Zerspanung bei Hochvorschub Die Hochvorschub-Fräsfamilie ist speziell auf große Zeitspanvolumina bei kleinen axialen Zustellungen ausgelegt. Dadurch lässt sich die Produktivität pro Einsatz deutlich steigern, ohne die Schnittkraft unnötig zu erhöhen. Anwender profitieren von schnellerem Materialabtrag bei gleichbleibender Stabilität, was insbesondere bei Serienfertigung und langen Bearbeitungszeiten zu messbaren Durchlaufzeitvorteilen führt. Die Kombination aus Bauart und Geometrie reduziert Rüstzeiten und steigert die Ausbringung. Materialwahl und Schneidstoffvorteile für stabile Spanbildung Tungaloy setzt bei dieser Ausführung auf Hartmetall in der Sorte UX30, ein unbeschichteter Schneidstoff mit scharfer Schneidkante. Dadurch entstehen niedrige Schnittkräfte und eine gut kontrollierte Spanbildung, was besonders bei weichen bis mittelharten Werkstoffen Vorteile bringt. Für Anwender bedeutet das weniger Vibrationen, gleichmäßigere Bearbeitungsbedingungen und eine verlängerte Standzeit im Vergleich zu ungeeigneten Schneidstoffen. UX30 eignet sich, wenn saubere Spanbildung und geringe Schnittkräfte im Vordergrund stehen. Geometrie und praktische Merkmale, die den Unterschied machen Die Platte verfügt über einen einseitigen Spanbrecher und ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was die sichere Befestigung und zuverlässige Spanabfuhr unterstützt. Der Eckenradius von 0,4 mm ermöglicht präzise Konturen und feine Oberflächen bei Plan- und Taschenfräsen. Solche Geometrien sind besonders nützlich, wenn enge Toleranzen verlangt werden oder wenn das Bauteil nach der Zerspanung nur minimal nachbearbeitet werden soll. Geeignete Anwendungen und Zielgruppen Diese Wendeschneidplatte richtet sich an Anwender im Bereich Fräsen, die auf Hochvorschubstrategien setzen: Fertigungsbetriebe mit Serien- oder Losfertigung, Jobshops und industrielle Anwender, die Effizienz und konstante Bearbeitungsergebnisse benötigen. Die Platte ist für Taschen- und Planbearbeitung optimiert und eignet sich für Prozesse, bei denen geringe axiale Zustellungen mit hohem Vorschub kombiniert werden, um die Produktivität zu erhöhen. Kurzklärung technischer Begriffe Für Interessierte mit begrenztem Fachwissen: Hochvorschub bezeichnet eine Bearbeitungsstrategie mit erhöhtem Vorschub pro Zahn und kleinerer Zustellung in axialer Richtung, um Material schneller zu entfernen. Spanbrecher ist eine gezielte Formgebung an der Schneide, die Späne bricht und so die Abfuhr und Maschinenstabilität verbessert. Diese Komponenten zusammen ermöglichen einen wirtschaftlichen, stabilen Bearbeitungsprozess. Für technische Beratung zur XCET 310404 UX30 Tungaloy-Wendeplatte oder zur Auswahl passender Wendeschneidplatten empfehlen wir die Kontaktaufnahme mit unserem technischen Vertrieb per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 — gezielte Prozessberatung und individuelle Vorschläge für Fräsaufgaben sind verfügbar. Produktmerkmale Artikelnummer: 6811538 Marke: Tungaloy Modellserie: DoFeed SKU Hersteller: TUN6811538 Fakten Eckenradius: 0,4 mm Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 31 mm Besonderheiten Material: Hartmetall Sorte: UX30 (scharfe Schneidkante, niedrige Schnittkräfte) Spanbrecher: einseitig Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Sonder Einsatz: Fräsen, Hochvorschub-Fräsfamilie FAQ Welche Anwendungen sind für diese Wendeschneidplatte geeignet? Die XCET 310404 UX30 Tungaloy-Wendeplatte eignet sich vor allem für Hochvorschubfräsen, Taschenbearbeitung und Planfräsen, wenn große Zeitspanvolumina bei kleinen axialen Zustellungen gefordert sind. Welche Vorteile bietet die UX30-Sorte? UX30 ist ein unbeschichteter Hartmetallschneidstoff mit scharfer Schneidkante, der niedrige Schnittkräfte ermöglicht und eine kontrollierte Spanbildung fördert, was die Prozessstabilität verbessert. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius von 0,4 mm sorgt für präzise Konturen und eine feine Oberflächengüte, besonders vorteilhaft bei engen Toleranzen und anschließender minimaler Nachbearbeitung. Ist die Platte für hohe Schnittgeschwindigkeiten geeignet? Die Konstruktion der DoFeed-Modellserie ist auf produktiven Hochvorschub ausgelegt; Hinweise zu maximalen Schnittgeschwindigkeiten sollten anwendungsbezogen vom technischen Vertrieb geprüft werden. Wie wird die Platte befestigt und was bedeutet die Senkung? Die Platte hat ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was eine sichere Befestigung auf dem Fräskörper und kontrollierte Flächenauflage gewährleistet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XCGT 060300 GH730 Wendeplatten - Tungaloy
Combining robust GH730 carbide wear resistance with a controlled 45DT chipbreaker and secure mounting, the insert delivers consistent hole quality and long tool life. Order the insert directly via Metav Werkzeuge or request technical consultation for system integration and optimal process settings. XCGT 060300 GH730 indexable insert for drilling — Tungaloy The XCGT 060300 GH730 is an indexable insert designed for general drilling applications within the TungDrillTwisted system, offering a balance of wear resistance and edge stability. Indexable insert XCGT 060300 GH730 for drilling Carbide grade GH730 for wear resistance Cylindrical hole with countersink for secure mounting 45DT chipbreaker for controlled chip formation Long-lasting wear resistance for steady production The combination of the GH730 carbide grade and the insert geometry provides pronounced wear resistance and edge stability under typical drilling conditions. This results in fewer index changes, longer continuous cutting times and predictable tool life — factors that support stable production rhythms and lower process interruptions. The material composition is designed to balance hardness and toughness, so the insert resists abrasive wear while retaining the necessary chipping resistance for intermittent cuts. For operations prioritising uptime and repeatability, the hardened grade contributes directly to reduced tooling consumption and consistent hole integrity. Secure mounting and precise chip control for consistent holes A cylindrical hole with single-sided countersink (40°–60°) and a 3.18 mm thickness ensure reliable clamping and positional repeatability in TDX drill bodies. The 45DT chipbreaker is tuned for controlled chip formation and evacuation, reducing the risk of built-up edge and unstable cut conditions. The specified 7° clearance angle supports smooth entry and exit behaviour, helping to preserve surface finish and hole geometry. These mechanical features translate into measurable process benefits: improved surface quality, reduced rework and less machine downtime due to chip-related interruptions. System compatibility and straightforward tool selection Part of the TungDrillTwisted family, the insert matches TDX and C‑TDX drill bodies and is used with XPMT style indexable plates; the system is differentiated by overhang (L/D) and interface to fit machine and application requirements. Selection of diameter, L/D ratio, shank and matching XPMT insert should be made with regard to the machine capability, coolant strategy and workpiece material. The modular system design allows straightforward replacement cycles and scalable inventory management, supporting both small-batch flexibility and high-volume repeatability. Where higher process reliability and ease of integration are essential, this system-level approach reduces setup complexity and supports predictable machining outcomes. Practical benefits and recommended applications Optimised for general drilling tasks, the insert is especially suited to operations that demand a compromise between productivity and durability. The carbide construction and balanced geometry deliver reduced tooling turnover and stable cutting forces, which is beneficial in production environments handling mixed batches or frequent machine changes. For shops seeking to improve throughput without sacrificing reproducibility, the combination of mechanical clamping, chip control and a proven carbide grade yields a pragmatic route to better process economics and fewer quality deviations. Contact Metav Werkzeuge for expert advice on integrating Tungaloy drilling inserts into TungDrillTwisted systems — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored tooling recommendations Technical data Manufacturer article number: 5505854 SKU: 5505854-Tungaloy Insert designation: XCGT060300-45DT GH730 Model series: TungDrillTwisted Application: Drilling Facts ISO code: 060300 Thickness: 3.18 mm Clearance angle: 7° Size: 06 Chipbreaker: 45DT Special features Carbide grade: GH730 Hole style: cylindrical hole with single-sided countersink (40°–60°) Material: carbide Compatible with TDX and C‑TDX drill bodies and XPMT inserts Family differentiated by overhang / L‑D ratio and interface System components: drill bodies, XPMT plates, clamping screws and key FAQ What materials is the insert suitable for? The XCGT060300-45DT GH730 insert, manufactured by Tungaloy, is intended for general drilling and the GH730 grade is formulated for broad material coverage with emphasis on wear resistance and edge stability. How is the insert secured in the drill body? The insert features a cylindrical hole with a single-sided countersink and is clamped with screws in TDX/C‑TDX drill bodies; this provides repeatable positioning and secure fixation during drilling operations. What does the 45DT chipbreaker provide in practice? The 45DT chipbreaker on the XCGT insert promotes controlled chip formation and evacuation, reducing build-up and improving surface quality and process stability during drilling cycles. Can this insert be used in different overhangs and L/D ratios? Yes, the TungDrillTwisted family is differentiated by overhang (L/D) and interface; selection of the appropriate drill body and insert combination should be based on machine capability and the required L/D for the application. What key dimensions should be observed when ordering replacement inserts? Relevant dimensions include the ISO code 060300, plate size 06 and plate thickness 3.18 mm; ensure compatibility with the selected TDX drill body and XPMT plate interface. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XCGT 060300 GH730 Wendeplatten - Tungaloy
XCGT 060300 GH730 Wendeschneidplatte für Bohren, Tungaloy Der XCGT 060300 GH730 ist eine Wechselplatten-Vollbohrplattensorte für präzises Bohren in industriellen Fertigungsprozessen und eignet sich für den Einsatz in TungDrillTwisted TDX-Bohrkörpern Wechselplatten-Vollbohrsystem kompatibel mit TDX GH730-Sorte für langlebige Schneidkante Plattendicke 3,18 mm für stabile Einspannung Zylindrisches Loch mit einseitiger Senkung (40°–60°) Spanbrecher 60DT für kontrollierte Spanbildung Langlebigkeit und Schneidkantenstabilität für produktive Bohrungen Die GH730-Schneidstoffsorte kombiniert Verschleißfestigkeit und Zähigkeit, wodurch die Standzeit bei kontinuierlicher Produktion erhöht wird. Gefertigt aus Hartmetall bietet die Platte eine stabile Schneidkante, die besonders bei unterbrochenem Schnittbild und wechselnden Schnittbedingungen Vorteile bringt. Die erhöhte Schneidkantenstabilität reduziert Nacharbeit und Werkzeugwechsel und trägt so direkt zur Produktivitätssteigerung bei. Systemkompatibilität und einfache Werkzeugauswahl Das TungDrillTwisted-Konzept erlaubt die Bestückung der TDX-Bohrkörper mit XPMT-Einsätzen; dadurch entsteht ein flexibles Wechselplatten-Vollbohrsystem, das sich je nach Durchmesser, L/D-Verhältnis und Maschinenschnittstelle konfigurieren lässt. Durch die Kombination von TDX-Bohrkörpern und XPMT-Platten wird die Werkzeugauswahl vereinfacht und die Wiederholgenauigkeit im Fertigungsprozess verbessert. Hinweise zur Wahl von Schaft und Kühlung erleichtern die praxisgerechte Auslegung. Anwendungsfeld und Zielgruppe mit Praxisnutzen Entwickelt für allgemeines Bohren, richtet sich die Platte an Zerspanungsbetriebe, Lohnfertiger und Produktionslinien, die robuste und wirtschaftliche Lösungen benötigen. Der Spanbrecher 60DT sorgt für kontrollierte Spanform und erleichtert die Spanabfuhr bei tiefen Bohrungen; das wird besonders bei längeren Werkzeugauskragungen relevant. Für Anwender bedeutet das geringere Stillstandszeiten und ein berechenbares Prozessverhalten. Empfehlung: Für produktive Bohrprozesse die XCGT060300-60DT GH730 von Tungaloy einsetzen; bei Fragen zur Auswahl oder Anwendung technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 5505855 Marke: Tungaloy Modellserie: TungDrillTwisted Bezeichnung: XCGT060300-60DT GH730 Hersteller SKU: TUN5505855 Daten Plattendicke: 3,18 mm FreiWinkel: 7° Plattengröße: 06 Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Besonderheiten Material: Hartmetall Sorte: GH730 Schneidstofftyp: Tungaloy-Schneidstoffsorte Spanbrecher: 60DT Plattenform: Sonder Mit Loch Einsatz: Bohren Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel FAQ Wie unterscheidet sich die GH730-Sorte von anderen Schneidstoffsorten? Die GH730-Sorte von Tungaloy ist auf ein ausgewogenes Verhältnis von Verschleißfestigkeit und Zähigkeit ausgelegt, wodurch die XCGT060300-60DT GH730 insbesondere bei wechselnden Schnittbedingungen eine längere Standzeit bietet und die Schneidkante stabil bleibt. Ist die Platte mit TungDrillTwisted TDX-Bohrkörpern kompatibel? Ja, die Wendeschneidplatte ist für das TungDrillTwisted-System konzipiert und lässt sich in TDX-Bohrkörper mit XPMT-Einsätzen einspannen, wodurch ein modulares Wechselplatten-Vollbohrsystem entsteht. Welche Vorteile bringt der Spanbrecher 60DT in der Praxis? Der Spanbrecher 60DT formt die Späne kontrolliert und verbessert die Spanabfuhr, was besonders bei tiefen Bohrungen und längeren Auskragungen zu weniger Maschinenstillstand und besserer Oberfläche führt. Welche Rolle spielt die Plattendicke von 3,18 mm? Die Plattendicke von 3,18 mm sorgt für eine höhere Stabilität in der Einspannung, vermindert Schwingungen und trägt so zu konstanten Bohrergebnissen und längerer Standzeit bei. Für welche Anwender ist die XCGT060300-60DT GH730 besonders geeignet? Die Platte richtet sich an industrielle Zerspanungsbetriebe und Lohnfertiger, die ein wirtschaftliches, zuverlässiges Vollbohrsystem für allgemeines Bohren suchen und Wert auf Prozessstabilität legen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 040104 AH6030 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH6030 and a sharp cutting edge for consistent, high-quality holemaking with reduced insert wear; order through Metav Werkzeuge or consult our specialists for application matching. XPMT 040104 AH6030 indexable insert for full-bore drilling (general drilling) — Tungaloy A XPMT 040104 AH6030 indexable insert designed for TDX full-bore drilling systems, providing robust edge stability and predictable performance in general drilling applications. PVD-coated AH6030 grade for wear resistance Sharp cutting edge for process security Designed for TDX full-bore systems Consistent process stability for productive holemaking The XPMT insert family is built to support industrial drilling cycles where repeatability matters. The AH6030 grade, a PVD-coated carbide, combines wear resistance with fracture toughness to maintain a sharp cutting edge over longer intervals; this reduces the frequency of index changes and helps keep cycle times stable. When mounted in compatible TDX drill bodies, the insert geometry contributes to steady chip flow and predictable cutting forces, which supports stable spindle loads and consistent hole quality across batches. Precision geometry that improves surface finish and accuracy A controlled insert geometry means fewer downstream operations. The 0.4 mm corner radius and the insert’s special form are optimised to produce a fine bore entry and controlled transition between cut and wall, lowering the need for rework. The chipbreaker DS is designed to manage chip formation for many drilling conditions, helping to avoid clogging and to preserve tool life. As a result, finishing operations are shortened and component tolerance conformity is easier to achieve. Practical compatibility and handling for workshop efficiency The insert is supplied in a standard 04 size with a thickness of 1.59 mm and a hole configuration described as cylindrical hole with single-sided countersink (40°–60°), simplifying clamping in TDX/C-TDX bodies. The standardised interface aids rapid changeover and reduces set-up time. Selection of diameter, L/D and shank should be matched to the machine and coolant strategy; when assembled correctly, the system supports high-throughput drilling without complex machine adjustments. Reduced risk and clear selection for engineering teams Choosing a PVD-coated carbide insert such as this one helps mitigate the risk of premature flank wear and edge chipping under mixed operational loads. The XPMT geometry, combined with the AH6030 grade, aims to provide a balance between wear resistance and fracture tolerance, which is particularly valuable for general-purpose drilling where material mixes and intermittent conditions occur. For purchasing and application planning, the standardised insert code and format simplify inventory and ordering processes. For reliable process security with Tungaloy AH6030 inserts, contact Metav Werkzeuge for application advice and matching to TDX drill bodies — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6718277 Manufacturer article number: 6718277 Manufacturer SKU: TUN6718277 SKU: 6718277-Tungaloy Model series: TungDrillTwisted Material: Carbide Facts Corner radius: 0.4 mm Thickness: 1.59 mm Free angle: 11° Size: 04 ISO designation: 040104 Insert hole: with hole; cylindrical + single-sided countersink (40°–60°) Special features Grade: AH6030 (PVD-coated carbide) Chipbreaker: DS Insert form: special Designed for TDX/C-TDX drill bodies Application: indexable full-bore drilling systems Family variation by overhang (L/D) and interface type FAQ How does this insert fit into existing TDX drilling systems? The XPMT insert is produced for use in TDX and C-TDX bore bodies and secures with the standard clamping screw system; correct matching of insert size and body interface ensures reliable seating and repeatable performance. What is the advantage of the AH6030 grade? AH6030 is a PVD-coated carbide grade that combines wear resistance with edge strength; in the XPMT040104R-DS configuration it supports a sharper edge and improved resistance to chipping in general drilling. What does the chipbreaker DS do in practice? The DS chipbreaker influences chip shape and evacuation, helping maintain consistent chip flow during drilling and reducing the risk of chip packing in through-coolant or external-coolant setups. Which geometrical data are most important when ordering replacements? Key data are the ISO code 040104, the corner radius 0.4 mm, thickness 1.59 mm and the hole/countersink specification; these ensure the replacement insert matches the original clamping and cutting geometry. Is this insert suitable for intermittent cutting or roughing conditions? The combination of the AH6030 grade and the insert form is intended to offer a compromise between toughness and wear resistance, making it suitable for many general-purpose and intermittent drilling scenarios, though final suitability depends on machine and workpiece conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 040104 AH6030 Wendeplatten - Tungaloy
XPMT 040104 AH6030 Wendeplatte für Wechselplatten-Vollbohrsysteme von Tungaloy Die XPMT 040104 AH6030 Wendeplatte unterstützt präzises Bohren in industriellen Fertigungsprozessen und eignet sich für den Einsatz in TDX-Bohrkörpern XPMT Wendeplatte für Vollbohrsysteme AH6030 PVD-Hartmetall für Prozesssicherheit Scharfe Schneidkante für präzise Schnitte Mit Loch und zylindrischer Senkung 40°–60° Eckenradius 0,4 mm für feine Bearbeitung Hohe Verschleißfestigkeit durch moderne Beschichtung Die Platte besteht aus Hartmetall und ist mit der Sorte AH6030 PVD-beschichtet, wodurch verschleiß- und ausbruchfestes Zerspanungsverhalten entsteht. Diese Kombination sorgt für eine längere Standzeit und eine stabile Schneidkante, was besonders bei unterbrochenem Schnitt oder schwierigen Werkstoffwechseln die Ausschussrate reduziert. Die Beschichtung verbessert die Wärmebeständigkeit und unterstützt konstante Bearbeitungsbedingungen auch bei erhöhten Schnittwerten. Präzision und scharfe Schneidkante für konstante Ergebnisse Dank des feinen Eckenradius von 0,4 mm und der sorgfältig gestalteten Geometrie liefert die Platte wiederholgenaue Bohrbilder und eine gleichbleibende Oberflächengüte. Die scharfe Schneidkante minimiert Schubkräfte und ermöglicht exakte Aufmaßhaltigkeit bei Durchgangs- und Planbohrungen. Anwender profitieren von verbesserten Toleranzergebnissen und weniger Nacharbeit bei Serienfertigung. Systemkompatibilität mit TDX-Bohrkörpern und modularem Aufbau Das Konzept basiert auf TDX/C-TDX-Bohrkörpern mit XPMT-Wechselplatten, Spannschrauben und Schlüssel, wodurch eine schnelle Montage und flexible Werkzeugbestückung möglich ist. Die Platte XPMT040104R-DJ ist für den Einsatz in modularen Vollbohrsystemen ausgelegt und erleichtert die Anpassung an Maschine, Werkstoff und Kühlung. Dadurch lassen sich Rüstzeiten verkürzen und Werkzeugvarianten effizient verwalten. Anwendungsspektrum und Materialeignung Die Ausführung ist speziell für produktive Bohranwendungen konzipiert und bietet gute Prozesssicherheit bei Standard- und anspruchsvollen Werkstoffen. Durch die PVD-Beschichtung eignet sich die Platte besonders für Anwendungen, bei denen eine scharfe Schneidkante und reduzierte Ausbrüche gefordert sind. Betriebe mit Serienfertigung und Auftragsfertiger finden hier eine zuverlässige Lösung für reproduzierbare Ergebnisse. Praktische Vorteile für Fertigung und Prozessplanung Die Einsatzfähigkeit in modularen Bohrköpfen erlaubt eine einfache Ersatzteilhaltung und reduzierte Lagerkosten, weil nur die Wendeplatte gewechselt werden muss. Gleichzeitig unterstützt die AH6030 Sorte eine stabile Spanbildung, was zu weniger Maschinenstillstand und höherer Produktivität führt. Diese Eigenschaften tragen zur Wirtschaftlichkeit bei und vereinfachen die Produktionsplanung im Schichtbetrieb. Auswahlhinweis und Einbauberatung Bei der Auswahl empfiehlt sich die Abgleichung von Durchmesser, L/D-Verhältnis und Schnittstelle mit der Maschine; die Plattenform Sonder und der Spanbrecher DJ bieten spezifische Anwendungsoptionen. Für technische Rückfragen oder Hilfe bei der Anpassung an individuelle Fertigungsbedingungen stehen die technischen Berater zur Verfügung und helfen, die passende Kombination aus Bohrkörper und Einsatz zu ermitteln. Empfehlung: Für produktive Bohrprozesse die XPMT 040104 AH6030 Wendeplatte von Tungaloy wählen; bei Fragen steht die Beratung zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930. Produktmerkmale Artikelnummer: 6718256 Hersteller: Tungaloy Serie: TungDrillTwisted Bezeichnung: XPMT040104R-DJ SKU: 6718256-Tungaloy Daten Eckenradius: 0,4 mm Freiwinkel: 11° Plattendicke: 1,59 mm Plattengröße: 04 Besonderheiten Material: Hartmetall Sorte: AH6030 Schneidstofftyp: PVD-beschichtetes Hartmetall (PVD: physikalische Dampfabscheidung, erhöhte Verschleißfestigkeit) Spanbrecher: DJ Plattenform: Sonder Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Systemaufbau: TDX/C-TDX-Bohrkörper, XPMT-Bohrplatten, Spannschrauben und Schlüssel Modellserie: TungDrillTwisted Wendeplattenbezeichnung: XPMT040104R-DJ FAQ Für welche Bohrertiefen eignet sich die Wendeplatte am besten? Die XPMT 040104 AH6030 Wendeplatte ist im Rahmen des TungDrillTwisted-Systems für verschiedene Auskraglängen und L/D-Verhältnisse einsetzbar; die Auswahl von Durchmesser und L/D sollte entsprechend Maschine und Kühlkonzept getroffen werden. Ist die Platte für unterbrochenen Schnitt geeignet? Ja, die AH6030-Sorte wurde für verschleiß- und ausbruchfeste Anwendungen entwickelt und bietet eine scharfe Schneidkante, die bei unterbrochenem Schnitt Prozesssicherheit erhöht. Welche Vorteile bringt die PVD-Beschichtung konkret? Die PVD-Beschichtung reduziert Verschleiß, verbessert die Wärmebeständigkeit und trägt zu stabiler Spanbildung bei; dadurch verlängert sich die Standzeit und die Oberflächengüte bleibt konstanter. Kann die Platte in vorhandene TDX-Bohrköpfe eingebaut werden? Das System ist auf TDX/C-TDX-Bohrkörper abgestimmt; durch den modularen Aufbau lassen sich XPMT-Wechselplatten in kompatible Bohrköpfe einbauen, sofern Schnittstelle und Schraubenbild übereinstimmen. Welcher Eckenradius ist verfügbar und wofür ist er gut? Der Eckenradius beträgt 0,4 mm und eignet sich für feine Bohrbilder sowie für die Minimierung von Aufrissen an der Kante bei präziser Bearbeitung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XPMT 040104 AH7020 Wendeplatten - Tungaloy
Benefit from a wear‑resistant, PVD‑coated carbide grade and the flexibility of an indexable‑insert drilling system for consistent, productive drilling. Order the insert set directly via Metav Werkzeuge or request application advice from the consultants. XPMT 040104 AH7020 — Indexable insert for drilling by Tungaloy The XPMT040104R-DS AH7020 is an indexable‑insert solution designed for general drilling tasks, combining a fracture‑resistant PVD grade with a family of TDX drill bodies for flexible L/D and interface choices. PVD-coated carbide AH7020 for process security Designed for indexable-insert drilling systems Cylindrical hole with 40°–60° countersink Durable grade and consistent cutting performance The drilling insert features the AH7020 PVD‑coated carbide grade, developed for wear resistance and resistance to chipping under typical drilling loads. This combination ensures a sharp cutting edge and process security, which translates into longer periods between indexing and fewer interrupted cycles. For operations where repeatability matters, the coating and substrate interplay reduces flank wear and prolongs tool life while maintaining acceptable surface quality. Geometry engineered for chip control and surface finish A specialised chipbreaker DS and the insert’s special plate form help to shape and evacuate chips reliably. The insert includes a cylindrical hole with one‑sided countersink (40°–60°) to suit secure clamping and stable positioning on the drill body. As a result, chip flow is controlled, burr formation is minimised and component finish is improved — particularly important when switching between workpiece batches or materials. System flexibility to match machines and applications Belonging to the TungDrillTwisted family, the system is supplied as TDX/C‑TDX drill bodies with XPMT inserts, clamping screws and a key. The modular approach permits selection by diameter, L/D ratio, shank and insert geometry to match machine capability, workpiece material and coolant strategy. This adaptability reduces setup complexity and supports efficient changeovers across varied production runs. Economical handling and fast serviceability The indexable design enables rapid insert changes and consistent re‑clamping accuracy, cutting downtime and supporting cost‑effective production. The XPMT040104R-DS AH7020 insert, with its 0.4 mm corner radius and 1.59 mm plate thickness, provides a balance between strength and cutting precision, making it suitable for routine drilling where tool life and reproducible performance are priorities. Contact Metav Werkzeuge (info@metav-werkzeuge.com | +49 2822 7131930) for tailored drilling advice and availability of the Tungaloy XPMT040104R-DS AH7020 Technical Data Article number: 6970301 SKU: 6970301-Tungaloy Manufacturer SKU: TUN6970301 Model series: TungDrillTwisted Plate designation: XPMT040104R-DS AH7020 Material: Carbide Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 1.59 mm Plate size: 04 ISO code: 040104 Countersink angle range: 40°–60° Special features PVD-coated carbide AH7020 Chipbreaker DS Cylindrical hole with one-sided countersink Special plate form (Sonder) Indexable-insert full-bore system TDX / C‑TDX drill bodies, clamping screws and key Application: Drilling FAQ What applications is this insert designed for? The XPMT040104R-DS AH7020 insert is designed for general drilling tasks within the TungDrillTwisted system, allowing selection by diameter, L/D, shank and insert geometry to suit different machine and workpiece setups. How does the AH7020 grade perform under drilling conditions? The AH7020 grade is a PVD‑coated carbide developed for wear and chipping resistance; it offers a sharp cutting edge and enhanced process security for stable drilling operations with fewer interruptions. Which components are included in the system supply? The system is supplied with XPMT inserts, TDX/C‑TDX drill bodies, clamping screws and a key, enabling straightforward assembly and secure clamping on the drill body. How should the insert size and drill body be selected? Selection is based on desired diameter, L/D ratio, machine spindle and coolant strategy; the TungDrillTwisted family supports matching of shank, body and insert to the specific machining scenario. Does the insert support reliable chip evacuation? Yes, the DS chipbreaker combined with the special plate geometry and the cylindrical hole/countersink arrangement improves chip control and contributes to consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
XPMT 040104 AH7020 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH7020 grade that combines wear resistance with a sharp cutting edge and precise DW chip control. The modular design ensures compatibility with TDX drill bodies from the TungDrillTwisted family for flexible L/D and shank choices. Order the XPMT040104R-DW AH7020 directly via Metav Werkzeuge or consult our specialists for application-specific selection. XPMT 040104 AH7020 indexable insert for drilling – Tungaloy The XPMT 040104 AH7020 is an indexable insert designed for general drilling, offering a wear- and chipping-resistant cutting grade for stable, reproducible performance in modular drill systems. PVD-coated AH7020 grade for wear resistance DW chipbreaker for controlled chip formation 0.4 mm corner radius for accurate hole finish Cylindrical hole with 40°–60° countersink Longer tool life through a wear-resistant cutting grade The insert XPMT040104R-DW AH7020 is built on a carbide substrate with a PVD-coated top layer (AH7020) developed for drilling applications where a sharp cutting edge and reliable performance are required. The PVD coating reduces flank wear and improves surface integrity, which translates into longer intervals between index changes and lower overall tooling costs. As a result, process stability is increased, and tool-change downtime is reduced, contributing to a smoother production flow and measurable productivity gains. Predictable chip formation for safer, faster cycles The combination of the DW chipbreaker and the specialised geometry produces consistent chip shapes and evacuation, which reduces the risk of chip snarling and improves cycle reliability. Controlled chip control is particularly important for medium to deep-hole operations and varied material mixes. By stabilising the cutting process, the insert supports higher feed rates and steadier cutting conditions, which commonly leads to improved throughput without sacrificing hole quality. A modular system that adapts to machine and application Designed for use in TDX drill bodies within the TungDrillTwisted family, this insert forms part of a modular drilling solution where diameter, L/D ratio, shank type and insert selection can be matched to the machine, workpiece material and coolant strategy. The system layout—TDX/C-TDX bodies, XPMT inserts, clamping screws and assembly key—allows straightforward retrofitting and simplification of inventory by standardising on proven interfaces and insert formats, enabling consistent set-up across different machines. Precision geometry for consistent hole quality Technical details such as the 0.4 mm corner radius, an 11° relief angle and a plate thickness of 1.59 mm support accurate hole profiles and a reliable edge form at the cutting zone. The insert features a cylindrical hole with a one-sided countersink (40°–60°) to secure seating and axial location in the drill body; this design ensures repeatable positioning and stable cutting engagement. These geometric choices help to lower vibration sensitivity and improve surface finish, delivering holes that meet tight dimensional and cosmetic tolerances. For application advice, selection of the compatible TDX drill body or to place an order for Tungaloy AH7020 inserts, contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation and fast delivery Technical data Article number: 6970284 SKU: 6970284-Tungaloy Manufacturer SKU: TUN6970284 Model series: TungDrillTwisted Designation: XPMT040104R-DW AH7020 Application: Drilling Core specifications Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 1.59 mm Plate size: 04 Countersink angle: 40°–60° ISO code: 040104 Special features Material: Carbide Coating/grade: PVD-coated AH7020 Chipbreaker: DW Hole style: Cylindrical hole with one-sided countersink Plate shape: Special System compatibility: TDX/C-TDX drill bodies, XPMT inserts, clamping screws and key FAQ What applications is this insert designed for? The XPMT040104R-DW AH7020 insert is designed for general drilling operations where a sharp cutting edge and reliable process behaviour are required; it forms part of a modular drilling system for flexible application. How does the DW chipbreaker improve drilling? The DW chipbreaker on this insert promotes controlled chip formation and evacuation, which enhances process stability and reduces the likelihood of chip-related interruptions during drilling. Can these inserts be used in TDX drill bodies? Yes, the insert is intended for use with TDX/C-TDX drill bodies within the TungDrillTwisted system, enabling standardised mounting and secure clamping. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius strikes a balance between edge strength and hole finish: it increases cutting-edge robustness while maintaining the ability to produce accurate hole diameters and good surface quality. How are the inserts secured in the drill body? The system uses clamping screws and an assembly key as part of the TDX set-up; the insert's cylindrical hole with a one-sided countersink ensures correct seating and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com