CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Achieve longer tool life and improved surface finish by combining the GT9530 coated cermet grade with the ISO rhombic CCMT geometry and 80° included angle; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT09T304 GT9530 CCMT indexable turning insert by Tungaloy — coated cermet, 80° rhombic geometry The CCMT09T304 GT9530 is an ISO rhombic indexable insert designed for precision external and internal turning in stable machining conditions, optimised for fine finishing and extended tool life GT9530 cermet for extended tool life ISO CCMT rhombic geometry, 80° included angle 0.4 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Greater tool life and consistent surface quality The GT9530 coated cermet grade provides a high level of wear resistance while maintaining a fine surface finish during finishing and light turning operations. Cermet combines ceramic hardness with metallic toughness, which reduces abrasive wear and supports longer cutting intervals under stable setups. This results in fewer insert changes and improved process reliability when consistent part appearance and dimensional stability are required. Seamless integration into ISO turning systems The insert follows the ISO CCMT format and the geometry is configured for reliable seating and repeatable positioning. Compatibility with a toolholder is defined by form, clearance angle, tolerance class, fastening method, size and thickness; the 80° included angle and 7° clearance angle ensure predictable cutting forces and easy toolpath programming. The ISO designation clarifies replacement choices and simplifies inventory management for production environments. Controlled chips and precise finishing in stable setups A single‑side chipbreaker is provided to aid chip control when conditions are steady and cutting parameters are matched to the material. The chipbreaker design supports predictable chip formation and evacuation, which helps to protect the cutting edge and maintain consistent surface quality. Selecting the correct chipbreaker and grade for the workpiece material and clamping stability will directly influence process efficiency and component finish. Practical recommendations for reliable machining The 0.4 mm corner radius and 3.97 mm thickness contribute to fine finishing capability while offering adequate strength for light turning tasks. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping; a matched holder, underlay/clamp set and replacement screws form the complete system. For best results, use a stable workpiece clamping, adjust feeds and speeds to the material, and verify seating to avoid vibration and premature wear. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy CCMT09T304 GT9530 insert; technical advice and delivery options are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998291 SKU: 6998291-Tungaloy Manufacturer SKU: TUN6998291 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Included angle: 80° Clearance (rake) angle: 7° Thickness: 3.97 mm Size designation: 09 ISO code: 09T304 Features and applications Coated cermet grade GT9530 Rhombic insert profile (CCMT) Single‑side chipbreaker Cylindrical hole with one‑side countersink (40°–60°) Intended use: external and internal turning System components: insert, holder, underlay/clamp set, replacement screws Material indication: carbide FAQ What materials is this grade suitable for? The GT9530-grade CCMT09T304 insert from Tungaloy is designed as a wear‑resistant coated cermet suited primarily for machining steel in finishing to light universal applications. How is compatibility with holders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT09T304 designation indicates the ISO format and should be matched with the corresponding holder, underlay/clamp set and fastening screws. Is this insert suitable for heavy roughing operations? The GT9530 grade is optimised for finishing and light universal turning; heavy roughing is not the intended primary use and may reduce tool life compared with grades designed for high‑load roughing. How does the chipbreaker affect machining? The single‑side chipbreaker on this insert is intended to improve chip control under stable conditions; selecting the correct chipbreaker and machining parameters contributes to consistent chip formation and reliable surface quality. What are the exact product identifiers for ordering? Article number 6998291, SKU 6998291-Tungaloy and manufacturer SKU TUN6998291 identify the Tungaloy CCMT09T304 GT9530 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated GT9530 cermet for longer tool life, 0.4 mm corner radius for fine finishing, and ISO compatibility for smooth integration into existing toolholders — order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. CCMT 09T304 GT9530 Turning insert (ISO CCMT, rhombic) — Tungaloy CCMT 09T304 GT9530 is an ISO‑normed indexable turning insert designed for finishing to light universal turning of steel, offering a balanced mix of surface quality and extended tool life. Coated GT9530 cermet for longer tool life Rhombic CCMT shape, 80° cutting angle 0.4 mm corner radius for fine finishing With cylindrical hole and 40°–60° countersink Consistent surface finish and extended tool life The GT9530 grade is a coated cermet developed for wear resistance and reproducible edge stability in finishing and light universal turning of steel. The combination of coating and cermet substrate reduces flank wear and helps maintain a sharp cutting edge over longer toolpaths, which improves uptime and reduces the frequency of insert changes. For production environments where stable clamping and consistent part quality matter, this grade provides measurable benefits in surface integrity and component tolerances. Stable cutting geometry for external and internal turning The rhombic CCMT geometry with an 80° cutting angle and 7° clearance supports both external and internal turning operations where rigidity and repeatable chip control are required. The single‑sided chipbreaker is optimised for steel machining under stable conditions; it produces a controlled chip form that eases evacuation and minimises interruptions. In practical terms, the insert supports steady cutting parameters and predictable tool life, which simplifies process planning and reduces setup iterations. Precision mounting and ISO compatibility for quick tool changes As an ISO‑normed insert, the CCMT 09T304 is compatible with a wide range of standard CCMT toolholders. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), enabling secure clamping and precise seating. With a thickness of 3.97 mm and standard size designation 09, the insert fits conventional clamping systems that match form, free angle, tolerance class, fastening method, size and thickness. This compatibility reduces the need for special holders and supports fast changeovers in mixed‑tool production cells. Application guidance and recommended use case This grade is particularly suited to finishing and light universal turning of steel where a good surface finish and extended stand time are priorities. The 0.4 mm corner radius is sized for fine finishing tasks: it smooths peak micro‑irregularities while maintaining dimensional control. For less stable workholding or interrupted cuts, a more robust geometry or different chipbreaker might be preferable; for consistent conditions, the GT9530 insert provides an economical balance between surface quality and lifetime. If technical parameters or alternative grades are required, Metav Werkzeuge can advise on the best match for the specific machining scenario. For machining steel with high surface quality and extended tool life, request the CCMT 09T304 GT9530 insert through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical Data Article number: 6998301 SKU: TUN6998301 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Cutting angle: 80° Clearance angle: 7° Thickness: 3.97 mm Corner radius: 0.4 mm Size: 09 ISO code: 09T304 Special features Coated cermet grade GT9530 Material: carbide Rhombic CCMT plate form Single‑sided chipbreaker With cylindrical hole + one‑sided countersink (40°–60°) Suitable for external and internal turning of steel Intended for finishing to light universal turning FAQ What materials is this insert intended for? The CCMT 09T304 GT9530 insert is intended primarily for steel machining in finishing to light universal turning applications. Which toolholders are compatible with this insert? Compatibility follows ISO CCMT standards; the CCMT 09T304 fits standard CCMT external and internal turning holders that match form, free angle, tolerance class, fastening method, size and thickness. What benefits does the GT9530 grade offer? GT9530 is a coated cermet grade that offers improved wear resistance and longer stand time while delivering a consistently good surface finish in stable turning conditions. How does the 0.4 mm corner radius affect the finish? The 0.4 mm corner radius smooths minor surface irregularities and helps achieve tighter surface roughness values without compromising dimensional control during finishing passes. What is the manufacturer SKU and article number? The manufacturer SKU is TUN6998301 and the article number is 6998301, both referencing the CCMT 09T304 GT9530 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 grade and a precise 0.4 mm corner radius to achieve consistent finishes and extended tool life in turning operations; order directly via Metav Werkzeuge or consult our specialists for selection and application advice. CCMT 09T304 GT9530 — ISO rhombic indexable insert for turning, coated cermet, by Tungaloy The CCMT 09T304 GT9530 is an ISO rhombic indexable insert designed for external and internal turning, delivering a wear-resistant coated cermet grade for enhanced finishing and stable, long-run performance Wear-resistant GT9530 cermet grade ISO rhombic CCMT geometry for versatile turning 0.4 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Predictable tool life and consistent surface finish The coated GT9530 grade is formulated for wear-resistant finishing and light universal turning of steel under stable conditions, providing longer intervals between indexings. As an indexable insert with a 0.4 mm corner radius, this geometry favours fine surface quality while retaining edge strength for repeated use. The controlled coating and substrate combination reduces flank wear and preserves dimensional accuracy, which helps to maintain batch-to-batch consistency and fewer reworks in production. For operations prioritising surface integrity and predictable productivity, the insert offers a balance of longevity and finish quality. Seamless integration with ISO turning systems Compatibility with toolholders is ensured by standardised ISO form, relief and tolerance classes; the rhombic CCMT outline and mounting hole mean straightforward fitment in a wide range of external holders and boring bars. The insert’s cylindrical hole with 40°–60° single-sided countersink secures repeatable clamping and precise seating, reducing chatter risk and simplifying changeover. With a 7° relief angle and a plate thickness of 3.97 mm, this geometry supports stable cutting conditions and predictable cutting engagement, enabling efficient set-up and consistent repeatability across different machines and fixtures. Chip control and grade design for stable machining The single-sided chipbreaker and the GT9530 composition are engineered to promote orderly chip formation during finishing and light turning cycles; this lowers the chance of surface damage and eases chip evacuation in confined setups. The grade’s characteristics are tailored for steel machining where a high-quality surface and extended wear resistance are required under steady, well-supported cutting conditions. The insert’s profile and chipbreaker reduce the need for extensive process adjustments, allowing operators to focus on machining efficiency and throughput. Operational benefits that support productivity Using this ISO rhombic insert reduces downtime for insert changes and supports longer productive runs thanks to the combination of a resilient grade and robust geometry. Fewer indexings translate into lower tool inventory movement and simpler tool management, while the improved surface finish can shorten downstream polishing or finishing steps. For workshops aiming to harmonise process reliability with ease of handling, the insert delivers measurable operational advantages and contributes to overall cost-effectiveness without compromising component quality. Contact Metav Werkzeuge for tailored application advice and to source CCMT 09T304 GT9530 inserts from Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Article number: 6998295 Manufacturer SKU: TUN6998295 SKU: 6998295-Tungaloy Model series: ISO turning inserts Designation: CCMT09T304 GT9530 Tungaloy insert Facts Shape: rhombic (CCMT) Size: 09 Corner radius: 0.4 mm Relief angle: 7° Thickness: 3.97 mm Insert angle / approach angle: 80° Special features Grade/coating: GT9530 (coated cermet) Substrate / material: Hartmetall (cemented carbide) Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert suited for? The CCMT 09T304 GT9530 insert is optimised for machining steel in finishing and light universal turning operations, where a good surface finish and longer wear life are required. How does the GT9530 grade affect tool life? The GT9530 coated cermet grade provides enhanced wear resistance and stable edge retention, extending service intervals compared with conventional finishing grades under steady cutting conditions. Is the insert compatible with standard ISO holders? Yes, the CCMT geometry and the standard hole and tolerance design allow compatibility with ISO-standard external holders and boring bars when the holder matches the insert form and size. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength with the ability to achieve a fine surface finish, reducing the risk of tool edge chipping while improving part appearance. Does the insert include a chipbreaker for improved chip control? The insert is supplied with a single-sided chipbreaker designed to promote orderly chip formation in finishing and light turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the declared material is "Hartmetall" while the cutting-material type is specified as "beschichtetes Cermet". Please verify the product specifications and correct the source data to ensure accuracy and consistency in the information provided, as discrepancies like this can lead to errors in manufacturing processes, incorrect product categorisation, or potential issues in quality control. It is essential to cross-check the declared material and cutting-material type against the original documentation or technical data sheets to confirm whether the discrepancy is due to a typographical error, outdated information, or an incorrect entry in the database, and take appropriate corrective actions to maintain data integrity.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet edge, precise geometry and ISO compatibility for consistent finishing results in turning operations; order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. CCMT 09T304 NS9530 — Tungaloy turning insert (cermet finishing for steel) The CCMT 09T304 NS9530 is an ISO‑standard rhombic turning insert engineered for finishing steel, offering a sharp cutting edge, low cutting forces and reliable performance in continuous cuts and small depths of cut. ISO rhombic insert CCMT 09T304 Uncoated cermet NS9530 for fine finishing Sharp edge and low cutting forces Cylindrical hole with single‑side countersink Consistent fine finishing with low cutting forces The NS9530 grade is an uncoated cermet designed specifically as a finishing grade for steel, delivering a sharp cutting edge that reduces cutting forces and improves surface quality. Cermet materials combine ceramic hardness with metallic toughness, which helps preserve edge geometry during continuous, low‑depth passes. The result is a high surface finish that often reduces downstream machining or polishing steps, supporting a lean production flow and improved cycle‑time efficiency. Secure clamping and geometry that supports repeatability The rhombic plate form and the cylindrical hole with single‑side countersink (40°–60°) ensure precise seating and reliable clamping in compatible holders. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; matching these ensures correct tool projection and repeatable cutting conditions. With a corner radius of 0.4 mm and a relief angle of 7°, the geometry favours stable chip flow and controlled cutting forces, which benefits both tool life and part tolerances. Application focus: finishing on external and internal turning Designed for external and internal turning, this insert excels in finishing passes and operations requiring minimal material removal per cut. The one‑sided chipbreaker supports smooth chip control during continuous cuts and small depths of cut, while the ISO‑standard outline simplifies inventory and tool selection for mixed‑machine shops. Selecting the NS9530 finishing grade helps achieve consistent surface quality on steel components where tight tolerances and good appearance are required. Practical advantages for workshop integration The insert’s nominal thickness of 3.97 mm, the 80° included angle and the standard CCMT designation allow integration into common turning systems without custom adapters. The uncoated cermet grade is tolerant of finishing speeds and promotes a fine edge profile, making it particularly suitable where surface integrity and minimal burr formation are priorities. Clear identification by ISO code and manufacturer SKU streamlines reordering and tool‑management processes. For tailored advice or to source the CCMT 09T304 NS9530 Tungaloy turning insert, contact Metav Werkzeuge for application recommendations and availability — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Manufacturer article number: 6997716 Manufacturer SKU: TUN6997716 SKU: 6997716-Tungaloy Model series: ISO‑Drehwendeschneidplatten WPL designation: CCMT09T304 Grade: NS9530 Numbers / core technical data Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Plate size: 09 Designs / special features Rhombic plate form (CCMT) Uncoated cermet cutting material (NS9530) Single‑side chipbreaker With cylindrical hole + single‑side countersink (40°–60°) ISO‑standard turning insert Intended for external and internal turning Suited to continuous cuts and small depths of cut FAQ Is this insert suitable for finishing steel components? Yes. The CCMT 09T304 NS9530 Tungaloy turning insert is a finishing grade for steel, where the uncoated cermet and sharp edge produce low cutting forces and improved surface finish. What geometry does the insert have and what does that mean for clamping? The insert uses a rhombic CCMT form with an 80° included angle, a 0.4 mm corner radius and a 7° relief; the cylindrical hole with a single‑side countersink ensures secure seating in compatible holders. Is the NS9530 grade coated? No. The NS9530 grade supplied with the CCMT 09T304 is uncoated cermet, optimised for fine finishing and sustained sharpness in continuous finishing cuts. Which turning operations are recommended for this insert? This insert is recommended for external and internal finishing operations, particularly continuous cuts and small depths of cut where surface integrity and low cutting forces are priorities. How is holder compatibility determined? Compatibility is determined by matching form, relief angle, tolerance class, fastening type, size and thickness; CCMT 09T304 NS9530 will seat correctly in holders designed for CCMT inserts when these parameters align. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 uncoated cermet cutting grade, a small 0.4 mm corner radius and ISO compatibility to achieve reliable, high-quality finishing in continuous turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for process advice. CCMT09T304 NS9530 Tungaloy turning insert — ISO rhombic format, uncoated cermet, 0.4 mm radius A CCMT09T304-format indexable turning insert by Tungaloy, designed for fine finishing in turning operations and compatibility with standard ISO toolholders. CCMT09T304 format for ISO toolholders NS9530 uncoated cermet grade for fine finishing 0.4 mm corner radius for precise profiles Cylindrical hole with single countersink 40°–60° Precision finishing for steels with low cutting forces The CCMT09T304 NS9530 insert is manufactured as an uncoated cermet grade optimised for finishing cuts where a fine surface finish and low cutting forces are priorities. The NS9530 composition delivers a sharp edge geometry, reduced built-up edge tendency and consistent edge integrity during continuous, light-depth passes. With a 0.4 mm corner radius, the insert supports precise profile control and predictable corner behaviour, which helps to maintain dimensional accuracy and reduces the need for secondary finishing. The result is a combination of improved surface quality and extended effective tool life in stable turning conditions. Secure clamping and ISO compatibility for consistent results Designed to the ISO indexable insert system, this rhombic-shaped insert features an 80° included angle and a 7° relief (clearance) angle. Compatibility with a holder is determined by the insert form, relief angle, tolerance class, method of attachment, size and thickness. The ISO conformity simplifies replacement and inventory management across a production facility. The cylindrical hole with a single countersink (40°–60°) ensures a reliable locating and clamping interface; when paired with a correctly specified external holder or boring bar and appropriate shim/fastening set, the assembly minimises vibration and contributes to reproducible cutting conditions. Chip control and application guidance for continuous turning This insert is supplied with a one-sided chipbreaker, intended for continuous cuts and small depths of cut typical of finishing operations. Select the chipbreaker and grade combination according to workpiece material and machining stability: the NS9530 finishing grade is particularly suitable for steel where a sharp cutting edge and low cutting forces are required. The insert’s geometry and single-sided chip control promote smooth chip flow and reduce intermittent loading on the cutting edge, which is beneficial in automated or lights-out production runs. For varied production requirements, pairing the insert with holders engineered for stiffness will enhance productivity and surface integrity. Discuss application specifics with Metav Werkzeuge to specify the right Tungaloy CCMT09T304 NS9530 inserts for precision finishing; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998427 SKU: 6998427-Tungaloy Manufacturer SKU: TUN6998427 ISO designation: CCMT09T304 Data Corner radius: 0.4 mm Included angle: 80° Relief (clearance) angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features Rhombic plate form (80°) Cylindrical hole with single countersink (40°–60°) One-sided chipbreaker Grade: NS9530 (uncoated cermet) Typical application: turning (external and internal) System build: ISO indexable plate, matching external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert suitable for? The NS9530 finishing grade is specified for machining steel and is provided as an uncoated cermet to deliver sharp-edge performance and good surface finish when the CCMT09T304 insert is used in turning operations. How does the 0.4 mm corner radius affect part quality? A 0.4 mm corner radius offers a balance between edge strength and profile precision; it helps achieve consistent corner geometry and a high-quality surface finish on turned components when light finishing passes are used. Is the CCMT09T304 compatible with standard ISO holders? Yes. The CCMT09T304 format conforms to ISO indexable insert standards; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness, so matching those parameters ensures secure clamping and repeatable performance. What type of chip control does the insert provide? The plate is supplied with a one-sided chipbreaker designed for continuous cutting and small depths of cut typical of finishing operations, promoting stable chip flow and reduced edge loading. Can this insert be used for internal turning? Yes. The geometry and chip control of the CCMT09T304 make it suitable for both external and internal turning applications when mounted in an appropriate boring bar or holder that provides sufficient rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compliance, a NS9530 uncoated cermet grade optimised for finishing, and robust geometry for repeatable clamping and superior surface quality; order the CCMT09T304 NS9530 Tungaloy insert via Metav Werkzeuge or request specialist advice from the consultants at Metav Werkzeuge for selection support. CCMT09T304 NS9530 Tungaloy insert for turning — uncoated cermet finishing, 0.4 mm radius CCMT09T304 is an ISO‑standard rhombic indexable insert developed for external and internal turning, designed to deliver fine surface finishes in steel finishing applications ISO rhombic insert CCMT09T304, with 0.4 mm radius Uncoated cermet grade NS9530 for finishing 7° clearance angle for low cutting forces Cylindrical hole with 40°–60° countersink High‑quality finishing for steel with consistent results The CCMT09T304 insert is tailored for finishing operations on steel where a sharp cutting edge and stable cutting conditions are decisive. The uncoated cermet grade NS9530 provides a sharp edge that reduces ploughing and generates low cutting forces, which in turn supports improved dimensional consistency and a high surface finish. Because the grade is optimised for continuous cuts and small depths of cut, the insert helps maintain process stability during extended finishing passes, reducing rework and improving throughput in precision turning cells. Geometry and clamping that increase process reliability Compatibility with a toolholder is governed by form, clearance, tolerance class, clamping method, size and plate thickness. This indexable plate features a rhombic shape with a 0.4 mm corner radius, a 7° clearance and a plate thickness of 3.97 mm, while the cylindrical hole with single‑sided countersink (40°–60°) ensures secure mechanical retention. These dimensional attributes yield repeatable positioning and help avoid micro‑movement at the cutting edge, which is essential for achieving consistent parts in serial production. Clear geometric definition also simplifies holder selection and minimises setup time. Process benefits, chip control and economic efficiency With a one‑sided chipbreaker adapted for finishing, the insert supports predictable chip formation and evacuation in common turning setups. The combination of cermet chemistry and finely honed cutting geometry promotes longer edge life under finishing conditions, contributing to lower tool‑change frequency and reduced downtime. Improved surface quality and reduced cutting forces translate into shorter downstream processing and a favourable cost‑in‑use ratio. For workshops pursuing reliable, repeatable finishing on steel components, this insert offers a pragmatic balance between precision and productivity. Contact Metav Werkzeuge to source the Tungaloy CCMT09T304 (SKU: TUN6998431) for precision finishing work, or request tailored selection support from their technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998431 Manufacturer SKU: TUN6998431 SKU: 6998431-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T304 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Hole style: cylindrical hole + countersink 40°–60° Grade: NS9530 Special features Uncoated cermet (NS9530) For finishing on steel; continuous cuts and small depths One‑sided chipbreaker Rhombic plate form Compatibility via form, clearance, tolerance class, clamping, size and thickness FAQ What turning operations is this insert suitable for? The CCMT09T304 NS9530 insert is intended for external and internal turning operations, especially finishing passes on steel where a sharp edge and low cutting forces are required. Is the insert coated? The insert is an uncoated cermet in grade NS9530, selected for its finishing performance and edge sharpness. How is holder compatibility determined? Compatibility depends on plate form, clearance angle, tolerance class, clamping method, plate size and thickness; the CCMT09T304 follows ISO dimensions to align with standard holders. What chip control can be expected with this insert? Equipped with a one‑sided chipbreaker, the insert promotes consistent chip formation during finishing cuts, aiding evacuation and surface integrity. What is the SKU and article number for ordering? Ordering references: Article number 6998431, Manufacturer SKU TUN6998431, and seller SKU 6998431‑Tungaloy; these identifiers assist with correct procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp, low-force cutting geometry and the fine-surface benefits of an uncoated cermet grade for consistent finishing results; order directly via Metav Werkzeuge or consult the technical team for process matching and availability. CCMT 09T304 NS9530 – ISO turning insert, uncoated cermet finishing (Tungaloy) CCMT 09T304 NS9530 is an ISO rhombic turning insert designed for finishing steel, providing a precise edge geometry and low cutting forces for continuous, fine-turning operations. ISO rhombic insert CCMT 80° geometry Uncoated cermet NS9530 for finishing Sharp edge for low cutting forces Suitable for continuous turning and fine cuts High-precision finishing for superior surface quality The insert delivers a measurable improvement in surface finish thanks to the uncoated cermet grade NS9530, which combines a sharp cutting geometry with stable wear behaviour. With a nose radius 0.4 mm and an 80° rhombic form, the geometry is optimised for small depths of cut and continuous cutting, producing consistent finishes while keeping cutting forces low. The result is reduced need for secondary operations and a predictable part quality in serial production. Increased process stability through controlled chip formation Designed as a finishing grade, the substrate and edge preparation promote stable chip formation and reduced micro-chipping. The sharp cutting edge lowers the force transmitted to the workpiece, which decreases vibration and supports repeatable results across batches. Compatibility with the machining system is governed by holder form, clearance, tolerance class, fastening method, size and thickness, ensuring that the insert integrates smoothly into existing tooling setups and contributes to higher throughput with fewer interruptions. Simple mechanical integration and predictable clamping The ISO system format simplifies replacement and setup: the insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening and positional repeatability. At a thickness of 3.97 mm and a clearance angle of 7°, the geometry supports stable clamping and precise tool-path control. The single-sided chipbreaker is tuned for finishing cuts, and the standardised form factor allows ready pairing with appropriate external holders or boring bars to achieve the intended cutting conditions with minimal adjustment. The CCMT 09T304 NS9530 insert thus supports efficient changeover and consistent process behaviour. For finishing operations that require dependable surface quality and low cutting loads, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability, technical advice and order handling Technical Data Article number: 6998422 Manufacturer SKU: TUN6998422 SKU: 6998422-Tungaloy Model series: ISO turning indexable inserts Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Insert angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide substrate Grade: uncoated cermet NS9530 Plate form: rhombic Chipbreaker: single-sided Application: turning With hole for screw fastening FAQ What applications is this insert best suited for? This insert is intended for finishing in turning operations; the NS9530 uncoated cermet grade on the CCMT 09T304 is optimised for continuous cuts and small depths of cut on steel. How does the NS9530 grade affect surface finish and tool life? The NS9530 uncoated cermet provides a sharp cutting edge that lowers cutting forces and supports superior surface finish while offering stable wear behaviour for predictable tool life with finishing feeds. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the CCMT 09T304 format conforms to ISO standards and fits matching CCMT external holders or boring bars. How is the insert secured and positioned in the tool? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for reliable screw clamping and positional repeatability in standard ISO clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet NS9530 and ISO compatibility to achieve consistent finishing results with minimal rework; order the insert directly via Metav Werkzeuge or consult the technical team for application support. CCMT09T304 NS9530 turning insert (finishing) by Tungaloy CCMT09T304 NS9530 is an ISO-format, rhombic indexable insert for turning, optimised for finishing steel components with low cutting forces and superior surface quality. Precision rhombic geometry, ISO size 09 Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Compatible with ISO turning holders Optimised finishing performance for steel components The CCMT09T304 NS9530 indexable insert is designed as a dedicated finishing grade for steel. The uncoated cermet composition of grade NS9530 provides a very sharp cutting edge and reduced built-up edge tendency, which produces a high surface finish in continuous cuts and small depths of cut. This results in fewer secondary operations and a more reliable production flow, delivering measurable improvements in throughput and part quality. Predictable geometry for consistent results and tool life The insert’s rhombic plate form and defined flank geometry give repeatable contact conditions and stable chip flow. A 0.4 mm corner radius combined with a 7° rake angle favours low cutting forces and reduced vibration, supporting consistent dimensional accuracy on external and internal turning. The reliable geometry helps to extend effective tool life and reduces variability between batches, aiding process control in series production. Secure mounting and straightforward integration The plate is supplied with a cylindrical hole and one-sided countersink (40°–60°) for secure clamping in ISO-compatible holders. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; this insert’s dimensions and hole style enable straightforward retrofitting into standard turning toolholders. The clear mechanical interface simplifies changeovers and minimises setup time in the workshop. Practical application advice for process reliability Use the single-sided chipbreaker and NS9530 grade for continuous finishing passes on steel where low feed and small depths are required. Select a holder and clamping set that match the plate’s ISO geometry and thickness to maintain process stability. For mixed or interrupted cuts, consider an alternative chipbreaker or a different grade; for stable finishing operations this insert delivers excellent surface quality and predictable performance rooted in Tungaloy’s material and manufacturing standards. For precision finishing on steel components, choose the Tungaloy CCMT09T304 NS9530 turning insert and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer article number: 6997713 SKU: 6997713-Tungaloy Manufacturer SKU: TUN6997713 Model series: ISO indexable turning inserts Label: CCMT09T304 NS9530 Tungaloy turning insert Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm ISO size: 09 Free clearance (rake) angle: 7° Wedge angle: 80° Special features Uncoated cermet grade NS9530 Rhombic plate form (CCMT) One-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning; finishing for steel Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The insert is optimised for finishing on steel; the NS9530 uncoated cermet grade gives a sharp edge and low cutting forces specifically suited to continuous finishing passes on steel components. Can the insert be used for internal turning? Yes. The rhombic geometry and ISO size allow use in appropriate internal and external turning holders when the holder matches the plate form, thickness and clamping arrangement. How is the insert clamped in the holder? The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°); secure clamping requires a matching ISO-compatible holder and correct underlay or clamp set according to the holder manufacturer’s guidance. How does the cermet grade affect surface finish? The uncoated cermet NS9530 presents a very sharp edge and low deformation at the cutting zone, which reduces cutting forces and helps deliver a superior surface finish on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet cutting edge, low cutting forces and ISO conformity for reliable finishing operations; order the CCMT09T304 NS9530 insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CCMT09T304 NS9530 Tungaloy turning insert — uncoated cermet, 0.4 mm nose radius CCMT09T304 NS9530 Tungaloy turning insert designed for finishing cuts in steel, suitable for both external and internal turning applications. Uncoated cermet grade NS9530 for fine finishing 0.4 mm nose radius for precise contouring 7° clearance angle reduces cutting forces Single-sided chipbreaker for continuous cuts High-quality finishing with uncoated cermet The insert’s uncoated cermet grade NS9530 delivers a sharp cutting edge tailored for finishing operations on steel, producing excellent surface quality with reduced tendency for built-up edge. Cermet combines the hardness of ceramic phases with the toughness of metallic binders, so the insert offers a consistently fine finish at small depths of cut and during continuous feeds. This results in fewer reworks and a measurable improvement in final part appearance compared with standard grades. Predictable chip control and stable machining Equipped with a single-sided chipbreaker, the design supports stable chip formation during continuous turning, which helps maintain process reliability and reduces the risk of workpiece damage. The chipbreaker geometry is selected to match the intended material and cutting conditions, enabling efficient evacuation of chips and lowering the likelihood of vibration. For operations where steady, repeatable cuts are essential, this insert provides controlled removal and consistent results over production runs. ISO compatibility and precise geometry for accurate set-up As an ISO-normed insert, fit is determined by form, clearance angle (7°), tolerance class, clamping method, size and thickness. The rhombic plate with an 80° included angle and a 0.4 mm nose radius offers fine contouring capability, while the 3.97 mm plate thickness ensures secure clamping in standard holders. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure fastening. These measurable specifications make it straightforward to select an appropriate external holder or boring bar and to verify compatibility during set-up. Practical benefits for workshop efficiency Integration into a complete system — insert, suitable external holder or boring bar, shim/clamp set and replacement screws — ensures straightforward replacement and minimal downtime. The combination of low cutting forces and a sharp edge reduces power draw and tool wear in finishing passes, contributing to longer tool life and stable surface finish across batches. For customers seeking predictable finishing performance in steel turning, the grade’s balance of edge quality and process stability supports higher throughput and dependable part quality. For precision finishing with the NS9530 grade, contact Metav Werkzeuge for a compatibility check, stock information and tailored recommendations to match holder geometry and machining conditions. Technical data Article number: 6735900 Manufacturer SKU: TUN6735900 SKU: 6735900-Tungaloy ISO designation: CCMT09T304 Label: CCMT09T304 NS9530 Tungaloy insert Facts Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Plate thickness: 3.97 mm Size: 09 Countersink angle: 40°–60° Special features Material: cemented carbide Cutting material: uncoated cermet NS9530 Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Application: turning Model series: ISO turning indexable inserts FAQ What is the primary application for this insert? This insert is intended for finishing in external and internal turning operations on steel, where a fine surface finish and low cutting forces are required. Why choose the NS9530 grade over conventional carbide? The NS9530 cermet grade provides a sharper, more wear-resistant edge for finishing passes, improving surface quality and reducing built-up edge compared with many standard carbides. How is holder compatibility determined? Compatibility depends on insert form, clearance angle (7°), tolerance class, clamping method, size and thickness; the ISO designation CCMT09T304 facilitates matching to suitable external holders or boring bars. Does the insert support continuous cutting conditions? Yes, the single-sided chipbreaker and the uncoated cermet edge are optimised for continuous cuts and small depths of cut, offering stable chip control and repeatable results. What mounting features does the insert have? The insert includes a cylindrical hole with a one-sided countersink (40°–60°) for secure fastening; the plate thickness of 3.97 mm and rhombic form ensure reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance and easy compatibility with ISO holders: the uncoated NS9530 cermet grade delivers low cutting forces and excellent surface quality on Stahl, while the CCMT geometry and 0.4 mm corner radius enable reliable, consistent finishing. Order the insert directly via Metav Werkzeuge or ask the consultants for application recommendations. CCMT09T304 NS9530 Tungaloy indexable insert for turning — uncoated cermet, 7° clearance The CCMT09T304 NS9530 is an ISO rhombic turning insert designed for finishing operations on Stahl, offering a sharp cutting edge and stable performance in continuous cut conditions. Uncoated NS9530 cermet for excellent surface finish Rhombic CCMT geometry with 80° cutting edge 7° clearance angle for low cutting forces 0.4 mm corner radius for precise finishing High-quality finishing with low cutting forces The uncoated NS9530 cermet grade is formulated for finishing on Stahl, providing a sharp cutting edge and reduced cutting resistance that together improve surface integrity. In continuous cutting conditions and with small depths of cut the material combination yields consistent dimensional results and low burr formation. The insert’s geometry is optimised for tight tolerances and superior surface quality, making it particularly suitable where a fine finish is the primary requirement. Reliable fit and clear mounting parameters Designed to the ISO CCMT specification, the insert’s compatibility with holders depends on form, clearance, tolerance class, fixing method, size and thickness. The rhombic shape and an 80° approach give versatility for both external and internal turning in common ISO holder systems. The plate thickness of 3.97 mm and the cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and repeatable seating, reducing downtime from repositioning and improving process stability. Consistent process results and application guidance A 0.4 mm corner radius supports precision finishing without compromising edge life in fine-feed operations, while the 7° clearance angle lowers cutting forces and minimises rubbing. As a finishing grade, the insert is best matched with small depths of cut and steady feed to exploit the cermet’s strengths: high surface quality and low cutting temperatures. Select the single-sided chipbreaker and grade combination according to the workpiece Stahl grade and the machine’s rigidity to achieve optimal outcomes. Practical advantages and expected outcomes in production Using this CCMT insert reduces the need for secondary finishing in many standard turning tasks, as the material-grade pairing minimises common defects and produces uniform surfaces. The combination of ISO standard geometry, robust clamping interface and a finishing-oriented cermet supports efficient batch production where repeatability and surface integrity matter. For specialised materials or unusual alloys, a brief application review with technical advisors is recommended to confirm cutting data and holder choice. For tailored machining advice on the CCMT09T304 NS9530 insert and to arrange supply through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt application support and delivery coordination Technical data Article number: 6998616 SKU: 6998616-Tungaloy Manufacturer SKU: TUN6998616 ISO designation: CCMT09T304 Grade: NS9530 Manufacturer: Tungaloy Facts Shape: rhombic (CCMT) Size: 09 Thickness: 3.97 mm Clearance angle: 7° Approach angle: 80° Corner radius: 0.4 mm Special features Uncoated cermet cutting material Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for finishing cuts and continuous cutting Intended application: external and internal turning FAQ What machining tasks suit this insert best? The CCMT09T304 NS9530 insert is optimised for finishing operations on Stahl, especially continuous cuts and small depths of cut where a high-quality surface is required. Which holders are compatible with the insert? Compatibility depends on holder form, clearance, tolerance class, fixing method, size and thickness; ISO CCMT holders and matching clamping kits are suitable for this insert. How does the NS9530 grade affect tool life and surface finish? The NS9530 cermet provides a sharp cutting edge and lower cutting forces, which improves surface finish and reduces the tendency for built-up edge in finishing applications. Is the insert suited for roughing operations? As a finishing-grade cermet, the CCMT09T304 NS9530 is not intended for heavy roughing; it is best applied where precision and surface quality are priorities. What are the key mounting dimensions to check before use? Verify the plate thickness (3.97 mm), size (09), corner radius (0.4 mm), and the cylindrical hole with countersink to ensure correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a NS9530 cermet finishing grade and a 0.4 mm corner radius for consistently high surface quality in turning operations; order the insert via Metav Werkzeuge or consult our specialists for application support. CCMT09T304 NS9530 Tungaloy insert for turning — ISO CCMT 09T304, finishing grade The CCMT09T304 NS9530 Tungaloy insert is an ISO‑standard rhombic turning insert designed for precision external and internal turning, offering a low‑force, fine‑finishing solution for steel applications. ISO CCMT shape, size 09 insert NS9530 cermet for fine finishing 7° clearance angle for low cutting forces 0.4 mm corner radius for fine surface finish Precise ISO compatibility for reliable toolholding and process control The ISO designation and rhombic geometry ensure predictable fitment in standard CCMT holders and boring bars, giving a consistent mounting baseline. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness, so the CCMT format provides straightforward interchangeability in established tool systems. This predictability reduces setup time and simplifies inventory management, supporting smoother production flows and fewer tool changes per shift. Finishing performance from the NS9530 uncoated cermet grade The uncoated NS9530 cermet is a finishing grade formulated for steels, delivering a sharp cutting edge with low cutting forces and excellent surface quality during continuous cuts and small depth‑of‑cut operations. The combination of a 0.4 mm corner radius and a 7° clearance angle helps to reduce built‑up edge and minimise vibration at the cutting zone, resulting in improved surface integrity and less downstream polishing. For applications requiring repeatable, high‑quality finishes, this grade provides a clear efficiency advantage. Practical application advice and measurable benefits Designed for both external and internal turning, the insert features a single‑sided chipbreaker and a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping. Selecting the appropriate chipbreaker and the NS9530 grade according to workpiece material and machining stability enables longer uninterrupted cutting, better process stability and lower scrap rates. The standardised geometry and finishing focus minimise secondary operations and can reduce overall cycle time for precision components. For precision finishing in steel, request the Tungaloy CCMT09T304 NS9530 insert from Metav Werkzeuge or contact Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6789574 SKU: 6789574-Tungaloy Manufacturer SKU: TUN6789574 Model series: ISO turning inserts Article designation: CCMT09T304 NS9530 Tungaloy insert Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features ISO rhombic plate Uncoated cermet grade NS9530 Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) For external and internal turning Compatible with standard CCMT holders FAQ What materials is this insert intended for? The CCMT09T304 NS9530 insert is a finishing grade designed primarily for steel; the NS9530 cermet provides a sharp edge and low cutting forces for continuous cuts. Is the CCMT09T304 compatible with standard CCMT holders? Yes, the ISO CCMT format and standard dimensions ensure compatibility with holders specified for CCMT‑09 inserts when form, size and thickness match. What surface finish can be expected with this grade? Using the NS9530 cermet and the 0.4 mm corner radius typically yields improved surface integrity and reduced need for secondary finishing on steel components. How is the insert clamped and what is the hole style? The insert features a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping in conventional CCMT toolholders. Which chipbreaker should be selected for this insert? A chipbreaker matching the material, cut depth and machining stability is recommended; the CCMT09T304 is supplied with a single‑sided chipbreaker suited for finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet NS9530 grade, ISO rhombic CCMT geometry and a 0.4 mm corner radius for reliable finishing of steel; ideal where low cutting forces and high surface quality are required. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 NS9530 Tungaloy turning insert — ISO CCMT finishing grade for turning A CCMT09T304 NS9530 ISO turning insert engineered for finishing steel with a sharp cutting edge, low cutting forces and excellent surface quality. Uncoated cermet NS9530 for superior surface finish 0.4 mm corner radius for precise machining ISO rhombic CCMT form with 7° clearance angle Cylindrical hole with 40°–60° countersink for fastening Precision finishing where surface quality matters The combination of uncoated cermet NS9530 and the ISO CCMT geometry delivers a finishing solution optimised for steels that require a sharp cutting edge and low cutting forces. The fine grade is designed for continuous cuts and small depths of cut, enabling a consistent high surface finish while limiting tool-induced vibration. In practical terms, users can expect improved first-pass results in external and internal turning operations where finish and dimensional accuracy are priorities. Reliable fit and secure clamping for consistent performance Compatibility of the insert with the toolholder is determined by geometry, tolerance class, fastener style, size and thickness. The rhombic plate form, 7° clearance angle and cylindrical hole with single-sided countersink (40°–60°) ensure repeatable seating and straightforward clamping. The plate thickness of 3.97 mm and size 09 conform to ISO specifications, making replacement and inventory management straightforward for ISO-compliant tool systems. Operational benefits in routine turning tasks A 0.4 mm corner radius provides a balance between edge strength and the ability to achieve fine surface finishes on steel components. The single-sided chipbreaker supports controlled chip formation in finishing cuts, reducing the risk of surface defects and secondary operations. The reduced cutting forces associated with this grade also help to minimise induced chatter on smaller overhangs, contributing to more efficient cycle times and lower scrap rates in stable machining setups. Practical selection and system considerations Choose a matching chipbreaker and holder according to workpiece material, machining stability and depth of cut; the single-sided chipbreaker suits finishing passes on steel. The typical system comprises the ISO turning insert, a compatible external holder or boring bar, a backing/clamping set and replacement screws. For bespoke applications or uncertainty on holder compatibility, guidance is available to ensure the insert and tooling system are optimised for the desired finish and productivity. For precision finishing with Tungaloy's NS9530 cermet, contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6789569 SKU: 6789569-Tungaloy Manufacturer SKU: TUN6789569 Model series: ISO turning inserts Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Countersink: 40°–60° Special features Material: cemented carbide Grade/coating: uncoated cermet NS9530 Plate shape: rhombic (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole with single-sided countersink Application: Turning (external and internal) Typical use: finishing steel, continuous cuts, small depths of cut FAQ What materials is this insert suitable for? The insert is specified as a finishing grade for steel; the NS9530 uncoated cermet is optimised for producing high surface quality in continuous cutting conditions. Which ISO designation and size does it use? This cutting insert is ISO designated CCMT09T304 (size 09) and follows the ISO rhombic CCMT form factor for compatibility with standard holders. What fastening style is required for the insert? The plate features a cylindrical hole with a single-sided countersink (40°–60°) and is clamped in holders designed for CCMT plates with matching hole and tolerance classes. Is the insert appropriate for internal as well as external turning? Yes; the geometry and grade are suitable for both external and internal finishing passes when paired with the correct boring bar or holder and appropriate machining parameters. How does the NS9530 grade affect cutting behaviour? The NS9530 cermet grade provides a sharp cutting edge, low cutting forces and strong surface finish performance, particularly advantageous for finishing cuts and small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade insert that combines a sharp cutting edge, low cutting forces and consistent ISO compatibility for reliable turning operations; order this insert via Metav Werkzeuge or consult their specialists for holder matching and process planning. CCMT09T304 NS9530 turning insert by Tungaloy — uncoated cermet, finishing grade CCMT09T304 NS9530 is an ISO rhombic turning insert designed for finishing steel in continuous cuts and small depth-of-cut operations Uncoated cermet for sharp cutting edge Optimised for continuous cuts and small depths Rhombic CCMT form, 7° clearance angle Compatible with ISO turning toolholders (with hole) Consistent finishing quality with reduced cutting forces The uncoated cermet composition and the NS9530 grade deliver a notably sharp cutting edge, producing superior surface quality on steel components. Cermet combines ceramic and metallic phases to offer hardness and wear resistance while maintaining brittle fracture control; in practice this means lower built-up edge formation and more stable finishes during continuous turning. For manufacturers seeking fewer secondary finishing steps, the reduced cutting forces translate into less spindle load and steadier surface results. Predictable fit and geometry for straightforward holder selection The rhombic CCMT form and ISO designation ensure compatibility across standard turning toolholders, provided form, clearance angle, tolerance class, fastening method, size and thickness align. The insert features a 7° clearance angle, an included angle of 80°, and a 0.4 mm corner radius, all of which influence cutting contact and strength. The plate thickness of 3.97 mm and the cylindrical hole with a one-sided countersink (40°–60°) support secure clamping in common clamping sets and facilitate straightforward replacement without altering tool geometry. Operational advantages that streamline production With a one-sided chipbreaker design and suitability for small ap cuts, this grade supports steady chip formation under continuous-cut conditions, reducing vibration and the risk of surface irregularities. The combination of a sharp edge and low cutting resistance shortens cycle times on finishing passes and reduces the need for manual rework. For setups where machine stability is moderate, selecting this finishing-grade insert can improve throughput while preserving dimensional accuracy. Practical guidance for integration into machining cells The system typically comprises the ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. When integrating the insert into a tool assembly, ensure the holder matches the CCMT size and the countersink profile for correct seating. The NS9530 grade is intended primarily for steel finishing; for interrupted cuts or heavier roughing conditions a different grade or geometry should be chosen. Regular inspection of the cutting edge and adherence to recommended feeds and speeds for finishing will extend life and maintain surface integrity. For tailored advice on Tungaloy finishing inserts and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss applications and order options Technical data Article number: 6998436 Manufacturer SKU: TUN6998436 Metav SKU: 6998436-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T304 NS9530 Facts Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Cutting material: uncoated cermet Grade: NS9530 Application: Turning Typical system: ISO insert + external holder/boring bar + shim/clamp set + replacement screws FAQ What materials is this insert suitable for? The CCMT09T304 NS9530 is formulated as a finishing grade for steel, providing high surface quality when used on steels under continuous cutting conditions. Is the insert coated? No, the CCMT09T304 NS9530 is an uncoated cermet insert; the absence of coating helps preserve the sharp cutting edge required for superior finishing. Which toolholders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for CCMT-size ISO rhombic inserts with a matching countersink will accept this insert. What corner radius does the insert have? The insert has a 0.4 mm corner radius, suitable for achieving fine surface finishes while maintaining edge strength for light finishing cuts. Can this insert be used for interrupted cuts or roughing? This grade is intended for finishing and continuous cuts; for interrupted or heavy roughing operations, a more robust grade or different geometry is recommended. What must be checked when replacing worn inserts? Ensure correct seating on the shim/clamp set, that the countersink profiles match, and that the clamp screw torque follows the holder manufacturer’s specification to maintain geometry and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T505, precise ISO‑compliant form and a reliable one‑sided chipbreaker for efficient, repeatable turning of cast iron; order the insert via Metav Werkzeuge or ask our consultants for application support. CCMT09T304 T505 CCMT indexable turning insert for turning – Tungaloy The CCMT09T304 T505 is an ISO‑standard rhombic indexable insert optimised for external and internal turning of cast iron, offering stable chip control and economical cutting performance CVD‑coated carbide grade T505 Economical machining of cast iron ISO‑compliant CCMT form Reliable one‑sided chipbreaker Consistent, economical machining of cast iron The insert combines a CVD‑coated carbide substrate with the T505 grade, engineered for the economical machining of cast iron. The coating enhances wear resistance while maintaining cutting‑edge stability, which leads to longer tool life and fewer indexings in serial production. The one‑sided chipbreaker supports controlled chip formation, reducing the risk of entanglement and promoting predictable surface quality. Because the grade suits a range of process stabilities and interrupted cuts, the result is a measurable improvement in throughput and process reliability during routine turning operations. Secure fit and ISO compatibility for workshop flexibility Compatibility with toolholders is determined by geometry, clearance, tolerance class, attachment and thickness; this insert follows ISO specifications to ensure straightforward interchangeability. The rhombic form with an 80° lead angle and 7° clearance angle provides stable cutting engagement, while the 3.97 mm thickness and central cylindrical hole with single‑sided countersink (40°–60°) guarantee reliable clamping and repeatable seating. These design choices reduce set‑up time and support rapid reindexing in mixed‑batch workshops, allowing a smooth transition between external and internal turning applications without compromising process security. Durable cutting edge for predictable production results A 0.4 mm corner radius and the optimised one‑sided chipbreaker deliver a balance between robustness and finish quality; the modest radius preserves edge strength under interrupted cuts while still enabling acceptable surface results. The carbide substrate and CVD treatment ensure resistance to abrasive wear and thermal softening, so the insert maintains a stable cutting edge over longer cycles. The CCMT09T304 T505 insert is part of a system that includes a matching outside holder or boring bar, clamping seat and screws, which together support repeatable accuracy and efficient tool changeovers on shop‑floor lathes. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CCMT09T304 T505 inserts and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793671 Manufacturer SKU: TUN6793671 SKU: 6793671-Tungaloy Manufacturer: Tungaloy Material: Carbide Series: ISO indexable turning inserts Specifications Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Lead/approach angle: 80° Clearance angle: 7° Features CVD‑coated carbide, grade T505 Rhombic plate form (CCMT) One‑sided chipbreaker With hole: cylindrical hole + single‑sided countersink (40°–60°) Designed for turning (external and internal) Optimised for economical machining of cast iron Compatible with ISO‑standard holders and clamping systems FAQ Is this insert suitable for machining cast iron? Yes. The CCMT09T304 T505 insert is specifically graded and coated for economical machining of cast iron, delivering controlled chip formation and good edge life in that material group. Can the insert be used for interrupted cuts? Interrupted cuts are supported by the grade and geometry; the T505 carbide and robust corner radius allow reliable performance when stability is sufficient for the application. How is holder compatibility ensured? Compatibility depends on the CCMT form, clearance angle, tolerance class, attachment style, size and thickness. The insert follows ISO conventions to assist selection of the correct outside holder or boring bar. What does the central hole and countersink provide? The cylindrical hole with single‑sided countersink (40°–60°) enables secure clamping and repeatable seating in matching toolholders, improving process repeatability. Which benefits does the CVD coating bring? The CVD‑coating enhances wear resistance and thermal stability, extending tool life and supporting consistent cutting performance under production conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade tuned for cast iron, a compact rhombic 80° geometry, and stable chip control to increase machining throughput and reduce rework. Order the insert via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT 09T304 T5115 rhombic 80° indexable turning insert, CVD-coated carbide — Tungaloy The CCMT09T304 T5115 is an ISO-format rhombic turning insert designed for external and internal turning, offering a universal CVD-coated carbide grade optimised for cast iron machining. CVD-coated carbide grade T5115 Rhombic 80° geometry 0.4 mm corner radius Single-sided chipbreaker, with hole Improve cycle times with a coating and grade built for cast iron The combination of a CVD-coated carbide substrate and the T5115 grade delivers a balance of wear resistance and edge stability, which translates directly into longer tool life and fewer indexings during batch runs. The chemical vapour deposition process yields a robust coating layer that withstands adhesive wear common in cast-iron turning. For production environments this means more consistent component tolerances and reduced downtime for insert changes, helping to keep the machining cell running with predictable costs per part. Reliable seating and ISO-fit for flexible holder use The insert conforms to ISO dimensions and the specified geometry ensures compatibility with a wide range of holders when shape, relief angle, tolerance, fastening method, size and thickness match. The rhombic 80° profile and the cylindrical hole with one-sided countersink (40°–60°) allow secure clamping in both external holders and boring bars. The 7° relief angle and 3.97 mm thickness contribute to mechanical stability under heavier cuts, reducing vibration and helping to maintain surface finish without complex adaptation of existing toolplants. Controlled chip formation and predictable surface results A single-sided chipbreaker on this insert is tuned for chip control in turning operations on cast iron, directing swarf reliably away from the cutting zone. The 0.4 mm corner radius improves edge strength compared with very small radii, offering a good compromise between surface finish and robustness in interrupted cuts. Choosing this insert and the appropriate chipbreaker helps achieve consistent surface roughness and reduces secondary finishing, which benefits both job-shop and production-line setups where repeatability matters. Practical system setup and recommended applications The insert is intended for turning applications and is commonly used for both external and internal operations on cast iron materials. Typical system configuration comprises an ISO turning insert, a compatible external holder or boring bar, a shim/clamp set and replacement fastening screws. For best performance, match the chipbreaker and cutting data to material grade, part rigidity and machine stability. The geometry and coating make the insert particularly suited to stable turning operations where a combination of process security and cost-effectiveness is required. For reliable cast-iron turning with Tungaloy’s CVD-coated T5115 grade, contact Metav Werkzeuge for stock availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6864710 Manufacturer SKU: TUN6864710 SKU: 6864710-Tungaloy Dimensions & core data Corner radius: 0.4 mm Included angle: 80° Relief angle: 7° Thickness: 3.97 mm Size: 09 Materials & special features Carbide (CVD-coated) Grade: T5115 Rhombic insert shape Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended use: turning (external and internal) System: ISO-format insert; requires compatible holder, shim/clamp set and screws FAQ What materials is this insert best suited for? The CCMT09T304 T5115 insert is optimised for cast iron machining; the CVD-coated carbide and T5115 grade provide balanced wear resistance and edge stability for this material. Which holders are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert follows ISO dimensions and fits appropriately specified external holders and boring bars. How does the corner radius influence performance? A 0.4 mm corner radius increases edge strength and supports a stable surface finish in turning; it is a compromise between fine finish and durability, especially useful for intermittent cuts. Is the chipbreaker suitable for finishing passes? The single-sided chipbreaker is designed for reliable chip control in a range of turning operations; for very fine finishing passes a smaller-chip configuration or specific finishing chipbreaker may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T515 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade tailored for economical cast-iron turning and a compact 0.4 mm corner radius that reliably balances edge strength and surface finish; order directly via Metav Werkzeuge or request application advice from our specialists. CCMT 09T304 T515 Tungaloy indexable insert — ISO turning insert for cast iron, 80° rhombic geometry The CCMT09T304 T515 Tungaloy indexable insert delivers a robust solution for external and internal turning of cast iron, combining a wear‑resistant CVD coating with an economical cutting grade for stable, productive machining. CVD‑coated carbide for wear resistance Optimised for cast iron machining Rhombic 80° geometry for versatile turning Single‑sided chipbreaker with centre hole High productivity for cast‑iron turning The combination of a CVD‑coated carbide substrate and the T515 grade provides an optimal mix of wear resistance and cutting economy when machining cast iron. The coating reduces flank and crater wear at typical cutting speeds, which extends tool life and lowers per‑part costs. Selecting a matching chipbreaker and the correct stability class enables a predictable process, meaning fewer interruptions and a steadier production flow. Reliable geometry that simplifies holder selection The 80° rhombic geometry with a 0.4 mm corner radius and a 7° relief angle offers versatility for a range of turning tasks, from light finishing passes to more demanding semi‑roughing. The indexable insert is ISO‑compliant, so compatibility with holders is determined by form, relief angle, tolerance class, fixation, size and thickness. The central cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and quick index changes, reducing downtime at the machine. Consistent surface quality and edge stability A small corner radius such as 0.4 mm helps achieve tighter surface finishes without compromising edge strength when paired with the T515 cutting grade. The single‑sided chipbreaker controls chip formation in interrupted and continuous cuts, improving chip evacuation and reducing the risk of built‑up edge on the cutting face. For applications requiring repeatable surface integrity, this combination supports stable process windows and consistent part tolerances. Practical guidance for process optimisation When integrating the insert into production, choose a holder and seating that match the ISO form and tolerance to ensure proper chipflow and clamping. For interrupted cuts or unstable setups, favour a more robust clamping and consider a slightly reduced feed to protect the corner radius. In stable conditions, the CVD coating and grade enable higher cutting speeds and longer tool life, improving throughput and lowering overall machining costs. For machining advice, availability or to place an order for Tungaloy inserts, contact Metav Werkzeuge — Metav Werkzeuge provides technical consultancy and direct supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 6739798 Manufacturer article number: 6739798 SKU: 6739798-Tungaloy Manufacturer SKU: TUN6739798 Model series: ISO turning indexable inserts Material: carbide Core figures Corner radius: 0.4 mm Thickness: 3.97 mm Relief angle: 7° Insert size: 09 Basic angle: 80° Designs and special features ISO designation: CCMT09T304 Grade: T515 (CVD‑coated carbide) Shape: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning of cast iron FAQ What materials is this insert suitable for? The CCMT09T304 in T515 grade is primarily optimised for cast iron machining; its CVD coating and carbide substrate make it effective for abrasive grey and nodular cast irons. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius balances edge strength with surface finish, delivering improved part appearance while maintaining resistance to edge chipping under moderate loads. What does the hole and countersink configuration provide? The central cylindrical hole with a single‑side countersink (40°–60°) enables secure and repeatable clamping in compatible holders, simplifying indexing and reducing setup time. Is the insert compatible with standard ISO turning holders? Yes — the insert follows ISO geometry for rhombic turning plates; compatibility depends on matching holder form, relief angle, tolerance class, fixation, size and thickness. Which product code should be referenced when ordering? Order using the manufacturer article number 6739798 or SKU 6739798‑Tungaloy to ensure the correct CCMT09T304 T515 Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, precise geometry and reliable clamping for stable turning results and reduced tool changes — order directly via Metav Werkzeuge or consult our experts for application support. CCMT 09T304 T6215 ISO turning insert — rhombic plate, 0.4 mm corner radius, Tungaloy The CCMT09T304 T6215 is an ISO-standard insert designed for external and internal turning; optimised for stainless steel machining under stable to slightly interrupted conditions. CVD-coated carbide T6215 grade 0.4 mm corner radius Rhombic ISO plate, 7° clearance Cylindrical hole, 40°–60° countersink Higher productivity through a wear-resistant carbide grade The combination of a CVD-coated surface and the T6215 carbide matrix provides measurable improvement in wear behaviour when machining stainless steels. This grade is engineered to resist the thermal and adhesive tendencies of stainless materials, which reduces tool changes and supports a steadier machining cycle. The result is a more economical process with fewer interruptions and more predictable component output. Geometry engineered for repeatable accuracy and secure clamping The rhombic plate geometry with an included angle near 80° and a 0.4 mm corner radius delivers a balance between edge strength and finishing capability. The 7° clearance angle and 3.97 mm thickness ensure stable contact with the toolholder, while the cylindrical mounting hole with a one-sided countersink (40°–60°) secures repeatable seating. Compatibility with ISO holders depends on form, size and fastening, enabling straightforward integration into existing turning systems. Coating and chip control for improved surface finish A continuous CVD-coated layer on the insert reduces built-up edge and improves thermal resistance during demanding cuts, which benefits surface quality in stainless work. The single-sided chipbreaker, matched to the plate grade and cutting conditions, promotes controlled chip formation and evacuation. In practice, this leads to fewer edge-related imperfections and a reliable finish without sacrificing cutting speed. Practical dimensions for flexible workshop use Available in size 09 with a robust plate thickness, this insert fits standard ISO clamping systems and is suitable for a wide range of toolholders. The plate’s rhombic form and defined countersink geometry make selection and replacement straightforward, while the carbide substrate ensures consistent performance across batch production. For best results, select the chipbreaker and grade according to workpiece material, cutting mode and machine rigidity. For stainless steel turning tasks where process stability and surface quality matter, contact Metav Werkzeuge to specify the Tungaloy T6215 insert and receive tailored advice for integration into existing holders and turning operations Technical data Article number: 6945209 Manufacturer SKU: TUN6945209 SKU: 6945209-Tungaloy Designation: CCMT09T304 T6215 Tungaloy insert Model series: ISO turning inserts Manufacturer: Tungaloy Facts Thickness: 3.97 mm Size: 09 Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features CVD-coated carbide T6215 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for external and internal turning Intended application: turning stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert best suited for? The CCMT09T304 T6215 insert is intended primarily for machining stainless steel, where the CVD-coated carbide grade helps to control adhesion and heat. Is the plate compatible with standard ISO holders? Compatibility is determined by plate form, size and thickness; the CCMT09T304 follows ISO dimensions and fits holders designed for ISO rhombic 09 plates when the clamping and screw arrangement match. What does the T6215 designation indicate? T6215 denotes a CVD-coated carbide grade optimised for wear resistance and thermal stability during stainless steel turning operations. How does the insert’s chipbreaker affect performance? The single-sided chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the risk of edge build-up during continuous or lightly interrupted cuts. Can the insert be used for internal turning as well as external turning? Yes, the geometry and grade support both external and internal turning applications, provided the holder and setup deliver adequate rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215 for enhanced wear resistance, a 0.4 mm corner radius for improved surface finish, and ISO compatibility for smooth tool changes; order or request advice via Metav Werkzeuge for faster production readiness. CCMT 09T304 T6215 Turning insert for Turning — Tungaloy CCMT09T304 T6215 insert engineered for stable external and internal turning, particularly for rostfreier Stahl under steady to lightly interrupted conditions. CVD-coated carbide grade T6215 Designed for rostfreier Stahl turning 0.4 mm corner radius for improved finish ISO CCMT09 geometry, 80° rhombic form Reliable wear resistance for stainless applications The CVD-coated carbide composition of this indexable insert provides elevated resistance to abrasive and adhesive wear, making it suitable for machining rostfreier Stahl where work hardening and built-up edge are common challenges. The T6215 grade is formulated for stable cutting and retains a sharp, productive edge over longer tool life, reducing the frequency of insert changes. This results in a measurable increase in effective machining time and consistent component quality in serial production. Geometry that improves chip control and surface quality The rhombic 80° geometry combined with a single-sided chipbreaker promotes controlled chip formation and evacuation in both external and internal turning. The 0.4 mm corner radius balances edge strength with surface finish, helping to avoid chatter while achieving a fine profile on the workpiece. The 7° clearance supports reliable cutting action and contributes to predictable tool forces, which in turn benefits cycle-time stability and repeatable finishes on precision components. ISO compatibility for fast changeovers and robust clamping As an ISO-specified insert in the CCMT09 format, compatibility depends on form, free angle, tolerance class, clamping and thickness; this insert’s 3.97 mm thickness and standard CCMT mounting make it straightforward to integrate into widely used external holders and boring bars. The presence of a cylindrical hole with one-sided countersink (40°–60°) supports secure clamping and simple replacement, minimising downtime and set-up complexity on mixed-machine shop floors. Best-use scenarios and operational advantages Choose this grade where stable cutting regimes predominate and a wear-resistant edge is required for rostfreier Stahl components such as shafts, fittings and hygienic parts. The single-sided chipbreaker is intended for consistent chip segmentation in common turning operations, reducing secondary handling. If machining parameters are uncertain or interrupted cuts are frequent, specify holders and cutting conditions that match form, tolerance and chipbreaker to preserve edge life and component tolerances. For additional technical data or suitability checks, Metav Werkzeuge provides rapid consultation by email or phone. Contact Metav Werkzeuge for stock details and expert guidance on using Tungaloy’s T6215 inserts for rostfreier Stahl turning. Technical data Article number: 6945218 SKU: 6945218-Tungaloy Manufacturer SKU: TUN6945218 Model series: ISO-Drehwendeschneidplatten Facts Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Size: 09 Special features CVD-coated carbide (T6215) Rhombic plate form (CCMT) Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Designed for turning; compatible with ISO CCMT holders Suitable for rostfreier Stahl under stable to slightly interrupted conditions FAQ What materials is this insert intended for? The CCMT 09T304 T6215 insert is designed primarily for rostfreier Stahl, offering wear resistance and stable cutting behaviour suited to stainless applications. Can this insert be used for both external and internal turning? Yes, the rhombic CCMT geometry and single-sided chipbreaker make the insert suitable for both external and internal turning when matched with the appropriate holder. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and helps achieve a finer surface finish while maintaining resistance to small interruptions and vibration. Is the insert compatible with standard CCMT holders? The insert follows ISO CCMT09 specifications; compatibility depends on holder form, clearance, tolerance class, clamping method and thickness, with the provided hole style supporting secure mounting. What is the benefit of the T6215 grade? T6215 is a CVD-coated carbide grade focused on high wear resistance for rostfreier Stahl, providing longer edge life and consistent performance under stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T6215 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade and a 0.4 mm corner radius offers reliable wear resistance and consistent surface finish for turning stainless steels; benefit from secure edge life and repeatable results. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CCMT 09T304 T6215 Turning insert (rhombic) — Tungaloy The CCMT09T304 T6215 is an ISO‑standard rhombic turning insert engineered for external and internal turning of stainless steel in stable to lightly interrupted conditions. CVD‑coated carbide for wear resistance Suitable for stainless steel machining under stable cuts Rhombic geometry with 80° cutting angle Cylindrical hole with 40°–60° countersink Increased process stability through wear‑resistant grade The CVD‑coated carbide in the T6215 grade delivers a combination of wear resistance and stable cutting behaviour that extends tool life in continuous turning operations. The robust coating reduces flank wear and maintains edge security under the light interruptions common in stainless steel turning, which in turn lowers scrap rates and improves overall productivity. This makes the insert particularly suited to serial production where repeatability is essential. Improved surface finish and dimensional control The insert’s rhombic geometry and 80° cutting angle provide a balanced cutting action that supports good surface quality while preserving tool strength. The 0.4 mm corner radius helps to absorb minor variances in feed, improving dimensional consistency on turned parts without compromising the edge. The 7° clearance reduces rubbing on the flank and helps to avoid work hardening on stainless grades, while the single‑sided chipbreaker assists chip formation for better swarf control and safer machining. Practical compatibility and application guidance As an ISO standard turning insert, the plate requires a matching holder defined by form, relief angle, tolerance class, fastening, size and thickness for correct seating. With a 3.97 mm thickness, the insert fits standard clamping systems and uses a cylindrical hole with single‑side countersink (40°–60°) for secure fixation. Select the chipbreaker and grade combination according to workpiece stability and the specific stainless steel alloy to gain the best balance of surface finish and tool life. For precision stainless steel turning with the proven T6215 grade, contact Metav Werkzeuge for technical advice and current stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will recommend the optimal holder and clamping set for the application. Technical data Article number: 6876352 Manufacturer SKU: TUN6876352 Our SKU: 6876352-Tungaloy ISO designation: CCMT09T304 Product name: CCMT09T304 T6215 Tungaloy insert Facts Cutting angle: 80° Corner radius: 0.4 mm Relief (clearance) angle: 7° Thickness: 3.97 mm Size: 09 Special features CVD‑coated carbide (T6215) Single‑sided chipbreaker For stainless steel machining under stable to slightly interrupted cuts Rhombic plate form, ISO turning inserts series Cylindrical hole with single‑side countersink (40°–60°) FAQ What materials is this insert suited for? The CCMT09T304 T6215 insert is designed primarily for stainless steel machining and performs best under stable to slightly interrupted turning conditions. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, improving dimensional stability while still allowing a good surface quality on turned components. Which holder features are required for correct seating? Correct seating depends on matching form, clearance angle, tolerance class, fastening method, size and 3.97 mm thickness — use a holder compatible with ISO‑format rhombic plates and the insert’s 09 size. What does the T6215 grade provide? The T6215 grade, a CVD‑coated carbide, emphasises wear resistance and stable cutting behaviour, giving longer service life and reliable edge security in stainless steel turning. Is chip control handled by the insert geometry? Yes, the single‑sided chipbreaker is designed to improve chip formation and evacuation for the kinds of stainless steel turning applications this insert targets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T6215 with a 0.4 mm corner radius and a rhombic 80° geometry, the insert delivers durable performance and consistent results in stainless steel turning; order the CCMT09T304 T6215 insert directly via Metav Werkzeuge or ask the consultants for application support. CCMT09T304 T6215 ISO Turning Insert — CVD-coated carbide, 80° rhombic (Tungaloy) CCMT09T304 T6215 is an ISO‑standard indexable turning insert designed for external and internal turning operations, optimised for stainless steel under stable to lightly interrupted conditions. CVD-coated carbide for wear resistance Suitable for turning rostfreier Stähle Rhombic 80° geometry, 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Durable cutting performance for stainless steel machining The insert's CVD-coated carbide grade T6215 is developed for wear resistance in demanding turning tasks. The chemical vapour deposition layer increases resistance to adhesive and abrasive wear, which helps to maintain edge stability during continuous cuts. For operations on stainless steels, this coating reduces work hardening at the cutting edge and supports a steady material removal rate. Those seeking fewer tool changes and consistent surface quality will benefit from the combination of substrate and coating, which translates into improved uptime and predictable tool life. Geometry and mounting that promote stable cuts The rhombic 80° plate form with a 0.4 mm corner radius and 7° clearance delivers a balance between edge strength and cutting sharpness. The plate thickness of 3.97 mm adds rigidity, while the cylindrical hole with a 40°–60° countersink ensures secure clamping in compatible ISO holders. A single-sided chipbreaker assists chip control when machining with stable setups; selecting the appropriate chipbreaker and grade helps to avoid built-up edge and supports consistent surface finish. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so correct holder selection is essential for best results. Productivity gains and predictable tool life Using a purpose‑matched grade and geometry reduces the need for frequent tool changes and rework. Under the recommended cutting conditions, the insert supports consistent dimensional accuracy and surface finish, which contributes to shorter cycle times and lower per‑part tooling costs. The wear behaviour of the T6215 grade supports a steady flank wear progression rather than sudden chipping, meaning maintenance intervals can be scheduled reliably. For manufacturers aiming to increase throughput while maintaining repeatable component quality, this insert provides a cost‑effective route to stable production. System advice and selection guidance The insert is part of a system comprising the ISO turning insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws. Choosing the correct combination—insert grade, chipbreaker, and holder stability—depends on workpiece material, machining strategy and machine rigidity. For specific applications or to confirm holder compatibility, Metav Werkzeuge offers technical advice and can supply the required clamping components and spare fixation screws. Technical data such as clearance angles and hole style should be checked against the intended holder before assembly to ensure safe and repeatable operation. Contact Metav Werkzeuge for tailored application advice and to request the Tungaloy CCMT09T304 T6215 insert (SKU: 6876205-Tungaloy) via email or phone. Technical Data Article number: 6876205 Manufacturer SKU: TUN6876205 SKU: 6876205-Tungaloy Model series: ISO turning inserts Type designation: CCMT09T304 Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Plate size: 09 Special features Grade: T6215 (CVD‑coated carbide) Shape: rhombic, 80° Chipbreaker: single-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning, suitable for stainless steels under stable to lightly interrupted conditions Material: carbide FAQ Which materials is this insert intended for? The CCMT09T304 T6215 insert is designed primarily for machining stainless steels, where the CVD coating enhances wear resistance and reduces built‑up edge. What determines holder compatibility for this insert? Compatibility is governed by plate form, clearance angle, tolerance class, fastening method, plate size and thickness; the CCMT09T304 requires an ISO holder matching these parameters. For what cutting conditions is the T6215 grade recommended? T6215 is optimised for stable to lightly interrupted turning operations, offering a balance of wear resistance and edge stability for continuous machining of stainless steels. What role does the chipbreaker play on this insert? The single‑sided chipbreaker aids chip control in stable setups; selecting a chipbreaker adapted to the workpiece and machining stability improves surface finish and reduces problems with long chips. Can this plate be used for internal turning as well as external turning? Yes, the ISO‑standard geometry of the plate makes it suitable for both external and internal turning when paired with the correct holder and boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T6215 Wendeplatten - Tungaloy
Take advantage of a combination of high wear resistance, precise geometry and straightforward holder compatibility for smooth, productive turning operations; order directly via Metav Werkzeuge or consult the technical team for application support. CCMT09T304 T6215 — ISO turning indexable insert, CVD-coated carbide, for turning CCMT09T304 T6215 is a rhombic ISO turning insert designed for productive machining of stainless steels in stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic ISO CCMT 09 profile, 7° clearance 0.4 mm nose radius for precise finishes High-performance cutting for stainless steels with extended tool life The CVD-coated carbide composition delivers pronounced wear resistance and thermal stability, making the insert well suited to stainless steels where heat and abrasion are common. The CVD coating acts as a protective barrier, delaying flank wear and preserving cutting-edge geometry; this enables longer tool life and fewer index changes, which in turn supports higher machine utilisation. The performance advantage is particularly evident in steady, medium-depth cuts where consistent surface quality and dimensional repeatability are required. Precise geometry and standardised form for predictable results Designed to ISO conventions, the rhombic CCMT profile with an included angle of 80° and 7° clearance ensures reliable seating in appropriate toolholders. The plate thickness of 3.97 mm and the cylindrical hole with single-side countersink (40°–60°) allow secure clamping and repeatable positioning; tolerance classes and holder form determine final compatibility. The 0.4 mm nose radius balances edge strength with the ability to produce fine surface finishes, reducing secondary finishing work for many turning applications. Application guidance that maximises productivity and part quality Equipped with a single-sided chipbreaker and the T6215 wear-resistant grade, the insert is intended for turning operations where stable cutting conditions prevail. Selecting a compatible holder and matching the chipbreaker and grade to the specific stainless alloy and cutting strategy will optimise chip control and tool life. The systematic approach—ISO insert, appropriate external holder or boring bar, correct shim/clamp set and replacement screws—minimises setup time and supports reproducible machining cycles, improving throughput while keeping rework to a minimum. For robust stainless steel turning, specify the Tungaloy T6215 grade insert (CCMT09T304) through Metav Werkzeuge and request application advice or stock confirmation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6876259 SKU: 6876259-Tungaloy Manufacturer SKU: TUN6876259 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Data ISO designation: CCMT09T304 Insert size: 09 Included angle: 80° Clearance (relief) angle: 7° Nose radius: 0.4 mm Plate thickness: 3.97 mm Special features Material: CVD-coated carbide Grade: T6215 Shape: rhombic (CCMT) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning (Drehen) Compatibility: ISO turning holders and boring bars FAQ What materials is this insert intended for? The CCMT09T304 T6215 Tungaloy insert (SKU: 6876259-Tungaloy) is optimised for machining stainless steels under stable to lightly interrupted conditions. How does the CVD coating benefit machining performance? The CVD-coated carbide composition reduces flank wear and improves thermal resistance, so the insert maintains cutting-edge integrity longer in demanding stainless-steel applications. Which holder features are required for correct mounting? Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; a secure holder with matching seat geometry and clamp is recommended for repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and precise ISO compatibility for consistent turning performance. The CVD-coated grade T9215 and 0.4 mm corner radius deliver longer tool life and reliable surface finish in medium-steel production runs. Order directly via Metav Werkzeuge or consult the team for application matching. CCMT09T304 T9215 Tungaloy indexable insert for turning — CVD-coated carbide, 0.4 mm radius The CCMT09T304 T9215 is an ISO rhombic indexable insert engineered for external and internal turning, offering a balance of wear resistance and fracture toughness for productive steel machining. ISO CCMT geometry, 80° included angle CVD-coated T9215 for medium steel 0.4 mm corner radius for fine profiles Cylindrical hole with 40°–60° countersink Productivity through robust cutting performance The CVD-coated T9215 grade combines wear resistance with enhanced fracture toughness, making this indexable insert a strong choice for medium-steel turning where productivity and tool life matter. The coating improves resistance to built-up edge and thermal wear at elevated cutting speeds, which in turn reduces tool changes and downtime. Thanks to the 0.4 mm corner radius, the insert produces consistent edge strength and a predictable workpiece finish, particularly in continuous to slightly interrupted cuts. Compatibility and setup explained for efficient integration Designed to the ISO CCMT form, the insert fits a wide range of standard external holders and boring bars when matched for size, clamping method and clearance. The 80° included angle and 7° relief angle ensure stable cutting geometry, while the cylindrical hole with a one-sided countersink (40°–60°) permits secure clamping and straightforward indexing. For practical system assembly, pair the insert with the appropriate shim or clamp set and the correct screw specification to maintain repeatable seating and torque control. Practical handling, application guidance and expected benefits For turning operations in medium steels, this rhombic carbide insert is intended as a first-choice grade for general-purpose and high-productivity environments. The single-sided chipbreaker supports reliable chip formation and evacuation, improving surface quality and reducing the risk of chip interference. When machining with slight interruptions, the combination of coating and substrate toughness helps prevent premature chipping. Careful selection of cutting data and rigid workholding will maximise the advantageous balance of tool life and process reliability offered by this insert. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CCMT09T304 inserts and availability; technical data sheets and application advice are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6772427 SKU: 6772427-Tungaloy Manufacturer SKU: TUN6772427 Model series: ISO turning indexable inserts Designation: CCMT09T304 Grade: T9215 Material: CVD-coated carbide Manufacturer: Tungaloy Shape: rhombic Size: 09 Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Plate thickness: 3.97 mm Hole: with cylindrical hole + one-sided countersink 40°–60° Chipbreaker: one-sided Application: Turning (external and internal) Core dimensions & numerical data Corner radius 0.4 mm Plate thickness 3.97 mm Relief angle 7° Included angle 80° Size code 09 Countersink angle range 40°–60° Features & compatibilities CVD coating for improved wear resistance Suitable for medium steel machining Designed for continuous to slightly interrupted cuts Compatible with ISO-specified external holders and boring bars System components: outer holder/boring bar, shim/clamp set, spare screws One-sided chipbreaker for controlled chip formation Rhombic insert form for versatility in turning operations FAQ What materials is this insert best suited for? The CCMT09T304 T9215 indexable insert is optimised for medium steels; the CVD-coated carbide substrate provides wear resistance and toughness suited to general steel turning. Can the insert handle interrupted cuts? Yes, the T9215 grade is designed for continuous to slightly interrupted cuts and offers a compromise between wear resistance and fracture toughness for such conditions. Which geometry details affect the cutting result? The 80° included angle, 7° relief angle and 0.4 mm corner radius influence cutting forces, edge strength and surface finish when using the CCMT09T304 insert. Is the insert compatible with standard holders? The insert conforms to ISO CCMT form and is compatible with standard external toolholders and boring bars that accept the CCMT 09T304 geometry, provided clamping method and tolerances match. What system components are required for installation? A suitable external holder or boring bar, the correct shim or clamp set and the specified screws are required to secure the CCMT09T304 insert and ensure repeatable seating Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
The combination of CVD‑coated carbide grade T9215, a 0.4 mm corner radius and a robust one‑sided chipbreaker supports high productivity and reliable performance in medium‑steel turning; order the CCMT09T304 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T304 T9215 turning insert by Tungaloy — CVD‑coated carbide, 0.4 mm corner radius CCMT09T304 T9215 is an ISO‑standard indexable insert designed for external and internal turning in medium steels, offering a balanced mix of wear resistance and fracture toughness for productive, continuous or slightly interrupted cuts CVD‑coated carbide grade T9215 Suitable for medium steel turning 0.4 mm corner radius for edge strength 7° relief angle, rhombic 80° form Productive performance for medium‑steel turning The CVD‑coated carbide composition of this insert is optimised for medium steel applications, combining wear resistance with sufficient toughness to withstand interrupted cuts. As a result, the component supports sustained metal removal rates and consistent tool life, which directly benefits cycle time and part quality on series production. The coating reduces abrasive wear at the cutting edge, while the underlying substrate maintains edge stability under typical turning loads. Consistent geometry and secure clamping for repeatable accuracy A defined rhombic geometry with an 80° included angle and a 7° relief angle provides stable contact in compatible holders and predictable cutting forces. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to ensure precise seating and secure fastening on standard ISO turning holders. This mechanical consistency simplifies setup and repeatability across batches, reducing vibration and promoting uniform surface finish. Chip control and process reliability for continuous production The one‑sided chipbreaker is matched to the grade and insert geometry to direct chips away from the cut and maintain stable cutting conditions. Combined with the T9215 grade, the chipbreaker supports high productivity in continuous operations and helps prevent chip entanglement in light interruption scenarios. Selecting the correct chipbreaker and grade for the workpiece and machining strategy results in fewer tool changes and improved overall process efficiency. System compatibility and easy part selection As part of the ISO‑series of indexable turning plates, the insert requires a compatible external holder, shim/clamp set and replacement screws for a complete tool system. Key dimensions such as 3.97 mm thickness, size 09, and a 0.4 mm corner radius make it straightforward to match with standard toolholders specified for CCMT‑style inserts. With this standardisation, integration into existing tool inventories is uncomplicated and options for regrinding or replacement are clear and repeatable. For application advice or to obtain genuine Tungaloy CCMT09T304 T9215 inserts and compatible holders, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request a tailored recommendation from our specialists. Technical Data Article number: 6772434 SKU: 6772434-Tungaloy Manufacturer article number: TUN6772434 Model series: ISO‑Drehwendeschneidplatten ISO designation: CCMT09T304 Facts Corner radius: 0.4 mm Thickness: 3.97 mm Size: 09 Relief angle: 7° Included angle: 80° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features CVD‑coated carbide (T9215) One‑sided chipbreaker Rhombic insert form Designed for external and internal turning Compatible with ISO turning holders and clamping sets Suited to continuous and slightly interrupted cuts in medium steel FAQ What materials is this insert best suited for? The CCMT09T304 T9215 insert is engineered primarily for medium‑steel machining; the T9215 CVD‑coated carbide grade balances wear resistance and toughness for productive turning. How does the chipbreaker affect performance? The one‑sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation, supporting stable cutting conditions and higher material removal rates in continuous turning. Which holders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the CCMT format fits standard ISO CCMT‑style external holders when matched to the stated dimensions. Can the insert handle interrupted cuts? The carbide grade and geometry are suitable for continuous to slightly interrupted cuts; for heavily interrupted machining a different grade or edge preparation may be required. What dimensions must be considered when selecting a replacement? Key dimensions include size 09, 3.97 mm thickness, 0.4 mm corner radius and the 80° rhombic form; ensure the holder accepts the CCMT09T304 ISO designation. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com