CCMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a universal PVD-coated carbide AH6225 grade, a stable 0.4 mm corner radius and ISO conformity for a reliable turning process; order original inserts or consult Metav Werkzeuge for application advice. CCMT09T304 AH6225 — CCMT ISO turning insert for Drehen (Tungaloy) CCMT09T304 AH6225 Tungaloy-Wendeplatte is an ISO-standard indexable turning insert designed for general-purpose external and internal turning, optimised for rostfreier Stahl. ISO rhombic insert CCMT09T304 PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl turning 0.4 mm corner radius for stable cutting Countersunk hole fastening (40°–60°) Improved performance for rostfreier Stahl machining The PVD-coated AH6225 carbide grade combines a sharp, wear-resistant cutting edge with sufficient toughness for variable conditions. In practice, this means reduced risk of built-up edge and a more consistent flank wear progression when machining rostfreier Stahl, resulting in fewer interruptions and steadier part quality. The universal character of the grade makes it suitable for medium cutting depths and intermittent operations, lowering tooling complexity while maintaining process reliability. Geometry that delivers repeatable surface quality The ISO rhombic shape with an included angle of 80° and a clearance angle of 7° provides a robust cutting geometry that supports both finishing and medium turning tasks. The 0.4 mm corner radius balances strength and surface finish, reducing vibration on less rigid set-ups. With a plate thickness of 3.97 mm, the insert is dimensioned for stable clamping and repeatable seat contact, which contributes directly to consistent component quality and predictable tool life. Designed for straightforward clamping and compatibility Compatibility to a toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the CCMT format conforms to these ISO parameters. The insert features a countersunk hole with a cylindrical bore and a one-sided countersink (40°–60°), enabling secure fastening with standard screws and clamping elements. The one-sided chipbreaker guides chip flow for typical turning tasks, helping to avoid entanglement and facilitating reliable evacuation even on interrupted cuts. Operational benefits and cost-effectiveness By using a universal insert grade and a standardised geometry, stocking needs are reduced and process setup is simplified, which supports higher overall productivity. The combination of a stable edge geometry and PVD surface treatment extends tool life under varying conditions, lowering the frequency of index changes and machine downtime. Supplied as an ISO-format indexable plate, the component is intended for fast replacement and minimal rework, promoting steady production rates and easier process planning. Contact Metav Werkzeuge for detailed application guidance and to source original Tungaloy CCMT09T304 inserts, including advice on clamping and cutting data Technical data Article number: 6947664 Manufacturer: Tungaloy Manufacturer SKU: TUN6947664 Metav SKU: 6947664-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CCMT09T304 AH6225 Tungaloy-Wendeplatte Core data Corner radius: 0.4 mm Plate thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Size: 09 Special features Material: carbide Coating / grade: PVD-coated, AH6225 Plate shape: rhombic Chipbreaker: one-sided Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Application: Drehen (turning) ISO designation: CCMT09T304 FAQ What materials is this insert optimised for? The CCMT09T304 AH6225 insert is optimised for machining rostfreier Stahl and is designed to perform reliably under the work-hardening tendencies common to these alloys. How is compatibility with toolholders ensured? Compatibility is achieved through matching the insert form, clearance angle, tolerance class, clamping method, size and thickness; the CCMT09T304 conforms to ISO parameters for direct interchange with matching holders. What is the corner radius and what does it mean for surface finish? With a corner radius of 0.4 mm, the insert offers a compromise between edge stability and surface finish, supporting consistent results in finishing and medium-turning operations. Which coating and grade does the insert use to control wear? The insert uses a PVD-coated carbide grade AH6225, which provides a wear-resistant surface and maintains a sharp cutting edge for extended service life under varying cutting conditions. How is the insert secured to the holder and what should be checked during installation? The insert is secured via a cylindrical hole with a single-side countersink (40°–60°); ensure correct seat contact, screw torque and that the holder matches the CCMT09T304 geometry and tolerance for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade, stable cutting geometry and precise clamping features for consistent productivity in stainless-steel turning; order the insert directly via Metav Werkzeuge or ask our consultants for application support. CCMT 09T304 AH6225 ISO indexable turning insert by Tungaloy — PVD-coated carbide, 0.4 mm radius The CCMT09T304 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning applications where a balance of sharpness and edge stability is required PVD-coated AH6225 for stainless steels 0.4 mm nose radius for accurate profiles ISO rhombic 09 form with 80° cutting angle Cylindrical hole with 40°–60° countersink Consistent edge performance for demanding stainless-steel work The PVD-coated AH6225 grade, deposited on a carbide substrate, is formulated as a universal option for stainless steels, providing a sharp yet robust cutting edge under variable conditions. This combination reduces flank wear and helps to maintain surface integrity on turned components; the result is more consistent part quality and fewer insert changes during medium-duty operations. The coating supports thermal and adhesive resistance, which contributes to longer effective tool life and predictable machining intervals. Secure clamping and geometric accuracy for stable turning Built to ISO geometry, the insert’s rhombic 09 form and 80° cutting angle deliver predictable chip flow and cutting forces in both external and internal turning. The 0.4 mm nose radius permits fine profiling where dimensional tolerance and surface finish matter, while the 7° clearance angle helps avoid rubbing on the flank. A cylindrical hole with a single-sided countersink (40°–60°) ensures positive seating and repeatable clamp orientation; combined with the 3.97 mm plate thickness this yields mechanical stability under interrupted cuts and varying feed conditions. Application guidance and system compatibility for productive setups The insert is intended for use as part of a standard turning system: ISO indexable insert, compatible external holder or boring bar, shim/seat and clamping screw. The one-sided chipbreaker is matched to common turning feeds and assists with controlled chip formation when machining stainless steels. For selection, pair the AH6225 grade and chipbreaker style to the workpiece alloy, cut depth and machine rigidity to optimise cycle time and surface finish. If a different chipformer or grade is required for heavy roughing or high-speed finishing, choose accordingly within the same ISO family for seamless interchangeability. For personalised technical advice and rapid supply of the CCMT09T304 AH6225 Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the ideal grade and holder combination for the machining task. Technical data Article number: 6829158 Manufacturer SKU: TUN6829158 SKU: 6829158-Tungaloy Designation: CCMT09T304 AH6225 Facts Nose radius: 0.4 mm Plate thickness: 3.97 mm Clearance angle: 7° Cutting angle: 80° Size: 09 Special features Material: carbide Coating / grade: AH6225 (PVD) Plate form: rhombic Hole: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning; suitable for stainless steels; ISO-compatible FAQ What materials is this insert best suited for? This insert in grade AH6225 is formulated for machining stainless steels and performs well under typical medium-duty turning conditions. Can the CCMT09T304 handle external and internal turning operations? Yes, the ISO rhombic geometry and the clamping hole design allow use in dedicated external holders and compatible boring bars for internal turning. How does the 0.4 mm nose radius affect part finish? A 0.4 mm nose radius provides a compromise between strength and fine profiling, improving surface finish while retaining edge stability during normal feeds. Is this insert compatible with standard ISO holders? The CCMT09T304 follows ISO dimensions and seat geometry; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide insert with a 0.4 mm corner radius and 7° relief delivers repeatable finishing on rostfreier Stahl while maintaining edge stability under varying conditions. Combine the rhombic CCMT geometry with the universal AH6225 grade for productive turning. Order the CCMT09T304 AH6225 insert directly via Metav Werkzeuge or consult the technical team for application advice. CCMT 09T304 AH6225 – CCMT turning insert for Drehen by Tungaloy (0.4 mm radius, PVD-coated) A CCMT 09T304 AH6225 indexable insert designed for turning (Drehen), offering a balanced combination of edge sharpness and robustness for medium cutting regimes PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl Rhombic CCMT geometry with 7° relief 0.4 mm corner radius for precise finishing Predictable performance for rostfreier Stahl and mixed conditions The PVD-coated AH6225 carbide grade is specified for universal use on rostfreier Stahl, providing a compromise between sharpness and wear resistance that supports consistent cycle times. The coating reduces adhesion and improves thermal resistance during interrupted cuts or variable feeds, which results in fewer unplanned tool changes and more stable component tolerances. For production environments where material batches or cutting conditions vary, this configuration reduces setup risk and maintains surface quality across runs. Geometry tuned for accuracy and repeatability The rhombic CCMT form with an included angle of 80° and the 0.4 mm corner radius is intended to combine robustness with the ability to achieve fine surface finishes. The moderate radius allows controlled cutting edge engagement for facing and light turning while preserving edge strength at the outer corner. The 7° relief contributes to predictable chip flow and reduces rubbing, which helps sustain dimensional accuracy over repeated tool indexes and simplifies process parameter setting on conventional and CNC lathes. Coating and substrate engineered for tool life A PVD-coated carbide substrate offers a hard, wear-resistant surface that tolerates elevated temperatures and abrasive contact commonly encountered with rostfreier Stahl. The AH6225 composition is engineered to provide stable chip formation and extended useful life under medium-duty operations, lowering regrind frequency and improving cost per part in moderate runs. Explaining technical terms: PVD (physical vapour deposition) is a thin, adherent layer that enhances hardness and reduces chemical affinity between the workpiece and the tool surface. System compatibility and practical handling The insert is supplied in the ISO CCMT form (ISO designation CCMT09T304) and is compatible with standard CCMT external holders and boring bars when matching the insert form, relief angle, tolerance class, fixing method, size and thickness. The version with a cylindrical hole and single-sided countersink (40°–60°) enables secure clamping and easy indexing. Its nominal thickness of 3.97 mm and size designation 09 follow ISO conventions, allowing straightforward integration into existing tool inventories and assuring interchangeability for both external and internal turning tasks. Contact Metav Werkzeuge today to discuss the application of the CCMT09T304 AH6225 Tungaloy indexable insert and to request availability or cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796244 SKU: 6796244-Tungaloy Manufacturer SKU: TUN6796244 Material: Carbide Core specifications Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Size: 09 Thickness: 3.97 mm Features & applications ISO designation: CCMT09T304 Model series: ISO turning indexable inserts Coating / grade: PVD-coated AH6225 Shape: Rhombic (CCMT) Chipbreaker: One-sided Hole: With cylindrical hole + single-sided countersink (40°–60°) Typical use: External and internal turning Optimised for rostfreier Stahl FAQ What materials is this insert best suited for? The CCMT09T304 AH6225 Tungaloy indexable insert is optimised for rostfreier Stahl and performs well across a broad range of steels in medium cutting regimes. Can this insert be used for internal as well as external turning? Yes, the CCMT geometry and the design features of the insert permit both external and internal turning when mounted in the appropriate holder. What does AH6225 indicate for the insert? AH6225 denotes the PVD-coated carbide grade chosen for a balance of sharpness and wear resistance suitable for variable cutting conditions and reliable chip formation. How does the 0.4 mm corner radius influence finishing? A 0.4 mm corner radius provides a compromise between edge strength and surface finish capability, allowing fine finishing without excessively weakening the corner during interrupted cuts. Is the CCMT09T304 compatible with standard ISO CCMT holders? The insert follows the ISO CCMT form; compatibility depends on match of form, relief angle, tolerance class, fixing and thickness, and it is typically compatible with standard CCMT external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for improved edge life, a 0.4 mm corner radius for versatile profile control, and ISO compatibility for reliable holder pairing — order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 AH6235 Tungaloy indexable turning insert — PVD-coated carbide, 0.4 mm corner radius for turning CCMT 09T304 AH6235 is an ISO-format indexable turning insert designed for general external and internal turning, offering a tough grade optimised for interrupted cuts and materials prone to chipping. PVD-coated carbide for extended edge life Tough grade for rostfreier Stahl and interrupted cuts 0.4 mm corner radius for versatile profile work High-performance grade for demanding turning tasks The insert is produced in a PVD-coated carbide grade that balances wear resistance and toughness. This composition yields a stable cutting edge under variable conditions and reduces flank wear during longer cycles. Designed for turning operations, the geometry provides predictable chip formation with a single-sided chipbreaker, which helps maintain consistent surface quality and reduces rework. By selecting a tougher grade, the cutting edge resists sudden fracture in interrupted cuts and applications with increased breakout risk, making it suitable for work on rostfreier Stahl and other alloys where edge stability is critical. Precise geometry and ISO compatibility for dependable setup Featuring a 0.4 mm corner radius, an included angle of 80° and a 7° clearance angle, the insert offers a balance between strength and form fidelity. The plate thickness of 3.97 mm increases mounting stiffness and minimises vibration when paired with correctly matched holders. Compatibility with clamping systems is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the ISO designation ensures interchangeability with standard holders. The presence of a cylindrical hole with a single-sided countersink (40°–60°) supports secure fastening and accurate seating, reducing the need for repeated adjustments and enabling faster tool changes on production lines. Productivity benefits and predictable tool life Using a dedicated grade such as AH6235 brings tangible production advantages: more consistent chip control, fewer edge failures in unstable cuts and improved overall process reliability. The single-sided chipbreaker is tuned for chip evacuation in typical turning tasks, lowering machine downtime for cleaning and reducing cycle variability. For manufacturers seeking to raise throughput without compromising finish, the insert delivers an economical balance between tool life and cutting performance. When paired with a suitable outer holder or boring bar and correct cutting parameters, it contributes to a smoother, more predictable machining process and reduced scrap rates. Contact Metav Werkzeuge today to discuss suitability for specific turning operations or request assistance matching the right holder and parameters for this Tungaloy grade Technical Data Article number: 6890161 Manufacturer SKU: TUN6890161 SKU: 6890161-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Thickness: 3.97 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 7° ISO size: 09 Special features PVD-coated carbide grade AH6235 Single-sided chipbreaker Rhombic plate form (CCMT) Cylindrical hole + single-side countersink (40°–60°) With hole for positive clamping Suitable for turning; optimised for interrupted cuts and rostfreier Stahl FAQ What materials is this insert suitable for? The CCMT 09T304 AH6235 insert from Tungaloy is formulated for applications involving rostfreier Stahl and other steels where a tougher grade reduces chipping in interrupted cuts. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a compromise between edge strength and finished contour accuracy, allowing stable machining with reduced risk of edge breakage while keeping a fine surface profile. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO plate designation conventions and the compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; use matching ISO holders or appropriate boring bars. What does the PVD coating deliver in daily use? The PVD coating increases wear resistance and helps maintain a stable cutting edge, extending useful tool life under varying cutting conditions and improving process reliability. Can this insert be used for internal and external turning? The geometry and grade are suitable for both external and internal turning; select a holder and cutting parameters that match the insert’s dimensions and the intended operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade AH6235 optimised for stainless-steel and interrupted cuts, combined with the ISO rhombic geometry and secure fastening for stable turning operations — order directly via Metav Werkzeuge or consult our specialists for application support. CCMT 09T304 AH6235 Turning Insert — PVD-coated carbide, 0.4 mm nose radius (Tungaloy) The CCMT09T304 AH6235 is an ISO-standard rhombic indexable turning insert designed for external and internal turning applications, offering a tough PVD-coated carbide grade suited to interrupted cuts and materials prone to chipping. ISO rhombic insert CCMT 09T304, 0.4 mm nose radius PVD-coated carbide AH6235 for stainless steel Single-sided chipbreaker for interrupted cuts Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless-steel turning The combination of a PVD-coated surface and the AH6235 carbide substrate delivers a balance between toughness and wear resistance that is particularly suitable for stainless-steel machining and operations with increased breakout risk. The coating reduces built-up edge and improves abrasion resistance, while the tougher substrate resists chipping in interrupted cuts. This results in more stable tool life and more predictable process windows, which supports higher productivity and fewer unscheduled insert changes. Geometry and clamping for repeatable stability The insert’s rhombic ISO shape with a 0.4 mm nose radius and a 7° clearance angle provides a compromise between finish and strength; the 3.97 mm plate thickness contributes to rigidity when clamped. A cylindrical mounting hole with a 40°–60° countersink ensures secure and repeatable seating in compatible holders, reducing micro-movement and vibration. These geometric details allow the insert to deliver consistent surface quality and dimensional repeatability in both external and internal turning. Process integration and practical advantages Equipped with a single-sided chipbreaker, the insert supports chip control in unstable cutting conditions and during interrupted cuts; pairing the chipbreaker style and grade to the workpiece material and machining stability is essential for optimal results. The system approach comprises the ISO insert, a matching external holder or boring bar, an appropriate shim/clamp set and replacement screws, which together ensure a reliable setup. For general-purpose turning, the combination of chip control and a robust grade simplifies process planning and improves uptime. For robust stainless-steel turning tasks, consider the Tungaloy CCMT09T304 AH6235 insert and contact Metav Werkzeuge for tailored application advice and availability — Metav Werkzeuge is happy to support with technical guidance and order handling. Technical Data Article number: 6890165 SKU: 6890165-Tungaloy Manufacturer SKU: TUN6890165 Manufacturer article number: 6890165 Material: carbide Model series: ISO indexable turning inserts Facts Insert designation: CCMT09T304 Insert size: 09 Nose radius: 0.4 mm Clearance angle: 7° Plate thickness: 3.97 mm Main angle: 80° Special features Grade/coating: AH6235, PVD-coated carbide Plate form: rhombic Chipbreaker: single-sided Mounting: cylindrical hole with one-sided countersink (40°–60°) Typical applications: external and internal turning, interrupted cuts FAQ What materials is this insert best suited for? The CCMT09T304 AH6235 insert is optimised for stainless-steel and applications with an increased risk of chipping; the AH6235 grade provides toughness for interrupted cutting. How does the insert secure to the toolholder? The insert features a cylindrical hole with a 40°–60° countersink, designed for secure clamping in compatible external holders or boring bars to ensure repeatable seating. Is the chip control suitable for unstable cuts? Yes, the single-sided chipbreaker is intended to improve chip formation and evacuation in interrupted cuts and other unstable machining conditions. Which system components are needed to use this insert? A compatible ISO external holder or boring bar, the correct shim/clamp set and the replacement screws are required to assemble the cutting system for the insert. What benefits does the PVD coating offer? The PVD-coated surface enhances abrasion resistance and reduces built-up edge, contributing to improved tool life and more consistent surface finish when machining stainless-steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant PVD-coated carbide grade and a precise 0.4 mm nose radius for reliable machining of stainless steels and interrupted cuts; order directly via Metav Werkzeuge or contact our consultants for selection support. CCMT 09T304 AH6235 – ISO indexable turning insert for stainless-steel turning (Tungaloy) The CCMT09T304 AH6235 is an ISO-standard indexable insert designed for external and internal turning, optimised for machining rostfreie Stähle and interrupted cuts while offering improved resistance to edge breakouts. PVD-coated carbide grade AH6235 Optimised for rostfreie Stähle and interrupted cuts 0.4 mm nose radius for precise profiling ISO CCMT rhombic geometry, 7° clearance Consistent edge security for difficult stainless-steel work The combination of a PVD coating with a tougher carbide composition provides greater resistance against built-up edge and chipping when turning stainless steels. The AH6235 grade is formulated for applications with elevated breakout risk and for interrupted cuts; this results in fewer unscheduled tool changes and more predictable component quality. By choosing a PVD-coated carbide insert, machinists gain a balance between wear resistance and edge toughness that supports consistent cycle-times in series production. Geometry and clamping that simplify setup and accuracy The rhombic CCMT geometry and the ISO-standard size ensure compatibility with a wide range of indexable holders; fit is determined by shape, relief angle, tolerance class, fastening and thickness. The insert features a 0.4 mm nose radius for fine profiling and an overall approach angle of 80°, enabling accurate external profiling and stable face turning. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) which supports secure clamping and repeatable indexing without complex fixture changes. Productivity through targeted chip control and cutting strategy A single-sided chipbreaker tuned to the grade provides controlled chip formation for typical turning operations, reducing the risk of entangling chips and improving surface finish expectations. With a plate thickness of 3.97 mm and a 7° clearance, the insert supports moderate depths of cut and good stability in conventional turning. Selecting the correct chipbreaker and matching feed/speed to the grade permits longer tool life and a higher first-pass yield, contributing directly to lower unit manufacturing costs over time. Practical selection and system considerations The ISO insert is part of a system that includes the matching external holder or boring bar, underlay/locating set and spare screws; compatibility must be checked by form, free angle, tolerance class, fastening, size and thickness. When retrofitting or replacing inserts, confirm the holder’s seat and screw type to ensure correct clamping. For interrupted cuts, prefer the AH6235 grade to reduce chipping, and adjust cutting parameters to account for workpiece material condition and fixture rigidity. Contact Metav Werkzeuge for tailored advice on the CCMT09T304 AH6235 insert and to arrange supply: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6890154 Manufacturer SKU: TUN6890154 SKU: 6890154-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry: rhombic CCMT Size: 09 Nose radius: 0.4 mm Relief/clearance angle: 7° Approach angle: 80° Thickness: 3.97 mm Special features Grade: AH6235 Coating: PVD Material: carbide Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal), interrupted cuts FAQ Is this insert suitable for rostfreie Stähle? Yes. The CCMT09T304 AH6235 insert is formulated specifically for rostfreie Stähle and applications with increased breakout risk, offering improved edge toughness. Which holders are compatible with this CCMT insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the CCMT rhombic geometry matches standard CCMT holders when those parameters are aligned. What is the recommended edge radius for fine finishing? The insert has a 0.4 mm nose radius, which supports accurate profiling and a fine surface finish in both external and internal turning. How does the AH6235 grade affect cutting strategy? AH6235 provides tougher performance for interrupted cuts and stainless-steel machining; feed and speed should be adjusted to balance wear resistance and edge strength for longer tool life. How is the insert clamped and indexed? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and repeatable indexing when combined with the appropriate holder and clamping screw. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH725 Wendeplatten - Tungaloy
Combine the PVD-coated AH725 grade with the 0.4 mm nose radius and the ISO rhombic form for reliable turning results; order the inserts directly via Metav Werkzeuge or consult our team for application-specific recommendations. CCMT09T304 AH725 ISO turning insert — rhombic 80° cutting geometry by Tungaloy A CCMT09T304 AH725 indexable turning insert for external and internal turning, designed as an ISO‑standard rhombic insert with a 7° clearance angle and one-sided chipbreaker. ISO rhombic insert, 80° cutting geometry PVD-coated carbide, universal AH725 grade 0.4 mm nose radius for medium finishing Suitable for external and internal turning High process reliability with a universal PVD grade The PVD-coated carbide substrate with the AH725 grade delivers consistent performance across a range of steels and stainless steels, providing stable chip formation and extended edge life. This universal, fracture-resistant grade is particularly suitable where workpiece materials vary or where smaller toolholders are used; the result is fewer interruptions and more predictable tool‑change intervals. The ISO designation and standardised form ensure the cutting edge geometry is repeatable, which supports reproducible component quality and reduces setup time on the shop floor. Compatibility and secure clamping for trouble‑free operation Compatibility with the toolholder is determined by the insert form, 7° clearance angle, tolerance class, fastening method, size and thickness. The rhombic form and the cylindrical hole with a single‑side countersink (40°–60°) permit dependable clamping in compatible holders and allow the insert to be used in both external and internal turning operations. Specifying the correct holder and clamping kit avoids misalignment and ensures the insert sits at the intended projection and rake, which directly influences surface finish and tool life. Chip control and surface quality for efficient production The one-sided chipbreaker is optimised for a wide range of cutting conditions, supporting controlled chip flow and reduced rework. A 0.4 mm nose radius balances strength and finish capability, enabling medium finishing passes with reliable geometry. The insert thickness of 3.97 mm and the rhombic outline produce a stable cutting edge resistant to chipping, which helps maintain dimensional accuracy and reduces vibration in less rigid setups. For shops seeking a compromise between productivity and surface quality, this combination increases throughput while safeguarding component tolerances. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy CCMT09T304 AH725 inserts; our specialists provide technical guidance and procurement support to match inserts with the correct holders and cutting data. Technical data Article number: 6865365 SKU: 6865365-Tungaloy Manufacturer SKU: TUN6865365 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: AH725 (PVD-coated) Core measurements Size: 09 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Hole: with hole Features & applications Rhombic form (CCMT) One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) ISO designation CCMT09T304 Application: Turning (external and internal) Universal for steel and stainless steels PVD-coated carbide, fracture-resistant grade FAQ What materials is this insert suitable for? The CCMT09T304 AH725 insert is specified for machining a broad range of stainless steels and steels, offering stable chip control and repeatable performance across changing workpiece materials. How does the AH725 grade influence tool life? The AH725 PVD-coated grade provides improved resistance to edge fracture and wear under variable conditions, which typically extends service life compared with uncoated equivalents and supports consistent productivity. Which holder features are required for correct compatibility? Correct compatibility depends on matching the insert form, 7° clearance angle, size and thickness to the holder, plus the correct clamping kit and fastening method; the cylindrical hole with countersink secures the insert in compatible ISO holders. Can this insert be used for both roughing and finishing passes? Yes, the combination of the one-sided chipbreaker and a 0.4 mm nose radius allows flexible use from medium finishing to light roughing, depending on cutting parameters and machine rigidity. What is the exact ISO designation and thickness of the insert? The ISO designation is CCMT09T304, with a plate thickness of 3.97 mm, rhombic form and an included cutting angle of 80°. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH725 carbide grade, a 0.4 mm corner radius and a stable rhombic form that delivers reliable turning performance for steel and stainless steel; order directly via Metav Werkzeuge or consult our specialists for matching holders and clamping sets. CCMT09T304 AH725 Tungaloy indexable insert for turning — PVD-coated carbide, 0.4 mm radius CCMT09T304 AH725 is an ISO-spec rhombic indexable insert designed for precision external and internal turning, offering a versatile, break-resistant grade for mixed material applications. PVD-coated carbide AH725 for versatility 0.4 mm nose radius for fine contours 7° clearance angle for stable cutting Rhombic CCMT form with securing hole Consistent process security through optimised grade and coating The combination of the AH725 PVD coating and a carbide substrate provides a balanced solution for varied turning tasks. The chosen grade is designed to be universal and break-resistant, which means fewer insert changes where workpieces alternate between softer and tougher steels. This leads to measurable improvements in uptime and reproducible component quality. The PVD coating reduces flank wear and improves edge stability, translating directly into more predictable tool life and lower tooling costs per part. Geometry that delivers precision and repeatability A 0.4 mm corner radius and a 7° clearance angle create a geometry well suited to finishing and light- to medium-duty roughing where surface quality and dimensional control matter. The CCMT rhombic shape allows the insert to be mounted in many standard external holders and boring bars while the 3.97 mm plate thickness contributes to rigidity under load. The central hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures secure clamping and simple replacement; the secure fit reduces micro-movements that can affect concentricity and surface finish. Practical system guidance for efficient setup Used as part of a complete system — insert, compatible holder or boring bar, underpad/clamping kit and spare screws — this insert supports stable, repeatable turning operations. Select the single-sided chipbreaker variant to match workpiece material and machine stability; chip control is a key factor for uninterrupted production, particularly in automated or multi-operation setups. Where enhanced process security is required, pair the insert with a holder that matches form, clearance angle and tolerance class to ensure full compatibility and avoid seating errors. Economical advantage and recommended applications The AH725 grade is optimised for turning steel and stainless steel, making it suitable for mixed-production environments and operations where material batches vary. Its break-resistant nature reduces the risk of unexpected edge failure on smaller tools or in applications with intermittent cutting conditions. For shop floors seeking consistent performance without frequent insert swaps, this configuration offers a cost-effective compromise between wear resistance and edge toughness. Contact Metav Werkzeuge for tailored holder recommendations and application advice on the Tungaloy CCMT09T304 AH725 indexable insert; our consultants can verify compatibility and suggest the optimal clamping set for the production task. Technical Data Article number: 6856764 SKU: 6856764-Tungaloy Manufacturer SKU: TUN6856764 Model series: ISO-Drehwendeschneidplatten Facts Insert size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included hole style: cylindrical hole + single-sided countersink (40°–60°) Geometry angle: 80° Special features Grade/coating: AH725 (PVD-coated carbide) Substrate material: carbide Plate shape: rhombic (CCMT) Chipbreaker: single-sided Application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The CCMT09T304 AH725 Tungaloy indexable insert (SKU 6856764-Tungaloy) is intended primarily for steel and stainless steel applications; the AH725 grade offers versatility across varying steels and changing workpiece materials. How does the AH725 PVD coating affect tool life? The PVD coating on the AH725 grade reduces flank wear and improves edge stability, resulting in more predictable wear patterns and often longer effective tool life compared with uncoated grades in comparable conditions. Which holders are compatible with this CCMT insert? Compatibility depends on the holder's form, clearance angle, tolerance class, fixing method, size and thickness; select a holder designed for CCMT 09T304 inserts and confirm that the clamping screw and underpad match the insert’s hole style. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius offers a balance between edge strength and fine contouring capability, improving surface finish while retaining sufficient robustness for light- to medium-duty turning. Can this insert be used for internal turning? Yes, the rhombic CCMT form and the grade’s break-resistant properties suit both external and internal turning when paired with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide AH725 grade, an 80° rhombic geometry and a single‑sided chipbreaker that support stable, economical turning across steels and stainless steels. Order the CCMT09T304 AH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T304 AH725 — Indexable Turning Insert for Turning, Tungaloy A CCMT09T304 AH725 indexable turning insert for external and internal turning, featuring an 80° rhombic plate form and a single‑sided chipbreaker for reliable chip control 80° rhombic indexable geometry AH725 PVD‑coated carbide grade Single‑sided chipbreaker for consistent chips Cylindrical hole with 40°–60° countersink Consistent performance across mixed steels and stainless steels The CCMT09T304 AH725 insert is built on a PVD‑coated carbide substrate and the AH725 grade, which combines fracture resistance with broad workpiece coverage. This universal grade reduces the need for frequent insert changes when switching between different steels and stainless steels, especially in smaller tool setups or where process reliability is critical. The PVD layer enhances surface hardness and wear resistance while preserving edge toughness, resulting in longer, more predictable tool life and fewer interrupted production cycles. Precision geometry that simplifies holder selection and setup An 80° rhombic plate form with a nominal corner radius 0.4 mm and a relief angle of 7° delivers predictable cutting engagement and surface finish. The insert thickness of 3.97 mm and standard 09 size mean compatibility with ISO indexable holders; final fit is determined by form, relief angle, tolerance class, fastening, size and thickness. The centrally positioned cylindrical hole with a 40°–60° countersink secures repeatable clamping and reduces micro‑movement under cutting loads. These defined dimensions shorten setup time and make tool selection straightforward for shop environments that use ISO‑compliant tool systems. Stable chip control for higher productivity and surface quality The single‑sided chipbreaker is optimised for controlled chip formation during turning, reducing long swarf and minimising the risk of built‑up edge on the cutting edge. Controlled chips improve coolant penetration and evacuation, supporting a consistent surface finish and reducing manual handling post‑cut. For typical external and internal turning operations the combination of the chip control geometry and the AH725 grade offers a balance between reliability and cutting performance, helping to lower scrap rates and extend intervals between tool changes — a direct contribution to economical machining. Contact Metav Werkzeuge for application advice on Tungaloy CCMT09T304 AH725 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864887 SKU: 6864887-Tungaloy Manufacturer SKU: TUN6864887 Designation: CCMT09T304 AH725 Tungaloy indexable insert Material: Carbide Core data Cutting angle: 80° Relief angle: 7° Corner radius: 0.4 mm Thickness: 3.97 mm Size: 09 Special features Rhombic plate form Single‑sided chipbreaker Cylindrical hole with 40°–60° countersink PVD‑coated carbide grade AH725 Suitable for external and internal turning ISO indexable insert series Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Is the CCMT09T304 AH725 suitable for stainless steels? Yes. The CCMT09T304 AH725 insert uses a universal AH725 PVD‑coated carbide grade optimised for both steels and stainless steels, delivering good edge stability and wear resistance. Which holders work with this insert? The insert follows ISO indexable insert dimensions; compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and plate thickness. The cylindrical hole with countersink supports standard clamping systems. What applications is this insert best for? Designed for external and internal turning, the insert performs well where process reliability and consistent chip control are priorities, including operations with smaller tool sizes. What are the exact identifiers for ordering? Article number 6864887, SKU 6864887‑Tungaloy and Manufacturer SKU TUN6864887 correspond to the CCMT09T304 AH725 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH725 Wendeplatten - Tungaloy
Combine the PVD-coated AH725 wear resistance with a precise 0.4 mm nose radius and an 80° rhombic geometry to secure stable, repeatable turning results; order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility. CCMT 09T304 AH725 – Tungaloy indexable turning insert for turning The CCMT09T304 AH725 is an ISO‑designation rhombic indexable insert engineered for external and internal turning, providing universal, fracture‑resistant performance on Stahl and rostfreier Stahl. Universal PVD-coated grade AH725 Rhombic 80° geometry for stable cutting 0.4 mm nose radius for controlled profiling Cylindrical hole with one-sided countersink (40°–60°) High process security through advanced coating and substrate The insert combines a PVD coating with a tough carbide substrate to balance wear resistance and edge robustness. The AH725 grade is specified as a universal, fracture‑resistant sort, making it suitable when varying workpiece materials or smaller tool sizes demand consistent performance. The coating reduces adhesion and thermal wear while the substrate absorbs intermittent loads, which in practice means longer periods between index changes and fewer unplanned stoppages, improving overall machining uptime. Geometry engineered for repeatable precision and secure clamping A rhombic plate with an 80° approach angle and 0.4 mm corner radius delivers a robust edge for both roughing and fine finishing. The 7° clearance angle preserves edge life by reducing rubbing, and the plate thickness of 3.97 mm contributes to stiffness when mounted. The combination of a cylindrical hole and a one‑sided countersink (40°–60°) ensures positive seating and consistent clamping torque, so toolholders register the insert reliably and maintain concentricity during higher feeds and interrupted cuts. Practical selection advice to boost productivity on the shop floor Compatibility with ISO holders is determined by plate form, clearance angle, tolerance class, fixing and thickness; choosing the matching holder and torque setting prevents seating errors. The single‑sided chipbreaker is tuned for predictable chip control in a wide range of turning operations, which supports stable cutting and easier chip evacuation. For process planning, pair this grade with feeds and speeds adjusted to material class (Stahl or rostfreier Stahl) to benefit from the insert’s balance of wear resistance and edge security. For further machining data or holder recommendations, technical enquiries can be directed to the Metav Werkzeuge team. For reliable turning with Tungaloy’s AH725 PVD‑coated carbide, contact Metav Werkzeuge for compatibility checks and fast supply of the correct insert and holder components. Technical Data Article number: 6856698 SKU: 6856698-Tungaloy Manufacturer SKU: TUN6856698 Model series: ISO indexable turning inserts Designation: CCMT09T304 AH725 Facts Corner radius: 0.4 mm Approach angle: 80° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features Material: PVD-coated carbide (AH725) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink 40°–60° Plate form: rhombic Application: Turning, external and internal Compatibility: ISO holders determined by form, clearance, tolerance, fixing, size and thickness FAQ Which materials is this insert suitable for? The CCMT09T304 AH725 insert is designed as a universal, fracture-resistant grade for machining Stahl and rostfreier Stahl, offering reliable wear behaviour across common turning applications. What does the 80° rhombic geometry mean for cutting performance? An 80° rhombic geometry provides a strong cutting edge and even load distribution; this geometry, combined with the 0.4 mm radius and 7° clearance, supports consistent surface finish and longer edge life during varied turning tasks. How is the insert fixed and what ensures secure clamping? The plate features a cylindrical hole with a one-sided countersink (40°–60°), which together with the correct holder and torque specification ensures firm seating and repeatable clamping for the indexable system. Can this insert be used for internal turning operations? Yes, the rhombic form and the single-sided chipbreaker make the insert suitable for both external and internal turning; selection of the correct chipbreaker and holder geometry is advised for optimal chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH8005, a precise 0.4 mm corner radius and ISO compatibility for productive, stable turning of heat‑resistant alloys and hard materials — order via Metav Werkzeuge or consult the specialists for application guidance. CCMT 09T304 AH8005 Tungaloy indexable insert for Turning — PVD‑coated carbide, 0.4 mm radius A CCMT 09T304 AH8005 rhombic indexable insert engineered for stable external and internal turning of heat‑resistant alloys and hard materials, designed to work in ISO‑compliant clamping systems. PVD-coated carbide grade AH8005 0.4 mm corner radius for fine profiles 7° clearance angle, 80° approach Rhombic CCMT form with centre hole Productive wear resistance for demanding materials The combination of PVD-coated surface treatment and carbide substrate in this indexable insert provides enhanced wear resistance during continuous turning of heat‑resistant alloys and higher‑strength workpieces. The AH8005 grade is developed for stable machining conditions where edge integrity and tool life are critical; this translates into fewer indexings and reduced tool change frequency, improving overall process economy. For operators, the practical benefit is consistent performance under elevated temperatures and abrasive conditions, meaning more reliable cycle times and predictable maintenance intervals. Controlled geometry for consistent part finish A 0.4 mm corner radius and 7° clearance angle combine to deliver a balance between cutting edge strength and surface integrity. The moderate radius supports fine profile definition while reducing the risk of edge chipping on interrupted cuts; the clearance angle prevents rubbing and heat buildup at the flank. The 80° approach (lead) angle inherent to the CCMT form assists in producing stable cutting forces for external and internal turning operations. These geometric choices contribute directly to improved surface finish and repeatability on turned components. ISO compatibility and clamping system integration Belonging to the ISO‑standard series of turning inserts, the plate integrates into a conventional system comprising an insert, a matching external holder or boring bar, a locating shim/clamping set and replacement screws. Compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness; the CCMT format with a central hole and single‑side countersink (40°–60°) ensures secure clamping for torque transmission and repeatable positioning. Selecting the appropriate chipbreaker and grade to match workpiece material and machine‑tool stability optimises chip control and tool life. Operational advantages and recommended uses The one‑sided chipbreaker and the PVD surface make this insert especially suitable for turning operations where consistent chip formation and good edge life are needed. Typical applications include external finishing and semi‑finishing as well as certain internal turning tasks on heat‑resistant alloys and harder steels. The insert’s design supports productive, repeatable machining in stable set‑ups, reducing downtime and enhancing throughput. For specific cutting data or process optimisation, Metav Werkzeuge can provide technical recommendations and selection assistance. For machining heat‑resistant alloys and hard materials with reliable edge life, contact Metav Werkzeuge for tailored cutting data and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and ordering options. Technical data Article number: 6749959 Manufacturer SKU: TUN6749959 SKU: 6749959-Tungaloy Series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Plate thickness: 3.97 mm Clearance angle: 7° Approach angle: 80° Plate size: 09 Hole style: cylindrical hole + one‑side countersink (40°–60°) Materials & features Material: carbide Coating: PVD Grade: AH8005 Chipbreaker: one‑sided Plate form: rhombic (CCMT) Application: turning System: ISO insert, compatible holders, shim/clamp and screws FAQ What materials is this insert suitable for? The CCMT 09T304 AH8005 insert is intended for turning heat‑resistant alloys and harder materials; the AH8005 grade and PVD‑coating support wear resistance in these applications. How is the insert clamped in the holder? The insert features a central hole and a single‑side countersink (40°–60°) for secure clamping in compatible ISO holders, with the CCMT form ensuring correct positioning. What does the 0.4 mm corner radius affect? A 0.4 mm radius increases edge strength and helps produce better surface finish while minimising the risk of chipping on interrupted cuts compared with sharper radii. Is the chipbreaker suitable for roughing or finishing? The one‑sided chipbreaker is optimised for controlled chip formation under stable cutting conditions; selection between roughing and finishing depends on holder rigidity and cutting parameters. Can this insert be used for internal boring? Yes — the CCMT rhombic form and 80° approach angle permit certain internal turning operations, provided a suitable boring bar and stable set‑up are used. Which holder tolerances are required for compatibility? Compatibility is governed by insert form, free angle, tolerance class, fastening style, size and thickness; use ISO‑compliant holders matched to CCMT 09T304 dimensions for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8005, precise 80° geometry and a 0.4 mm corner radius for consistent metalcutting performance; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. CCMT09T304 AH8005 ISO turning insert for turning — Tungaloy The CCMT09T304 AH8005 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a wear‑resistant PVD coating for stable machining of heat‑resistant alloys and hard materials. CCMT09T304 format, ISO‑standard rhombic insert PVD‑coated carbide AH8005 for wear resistance 80° geometry with 7° clearance angle 0.4 mm corner radius, one‑sided chipbreaker Consistent productivity through a wear‑resistant grade The combination of a PVD‑coated surface and a carbide substrate results in a cutting edge that resists abrasive and thermal wear, delivering longer tool life during demanding operations. As a result, machining cycles benefit from fewer interruptions for index changes and predictable tool‑life behaviour, which contributes to lower overall production costs and improved process stability when turning tougher alloys. Geometry engineered for precision and surface quality With an 80° lead angle and a 7° clearance, the geometry of the insert supports accurate chip formation and contact conditions that favour stable cutting. The 0.4 mm corner radius helps to maintain edge strength while achieving a good surface finish on shafts and bore surfaces. These geometric choices reduce chatter risk under rigid setups and help to achieve repeatable dimensional accuracy in serial production. System compatibility and holder selection guidance The cutting plate is ISO‑compliant in form and tolerance, so compatibility depends on matching the insert form, clearance angle, tolerance class, fastening style, size and thickness with the selected holder. A proper pairing of insert and external holder or boring bar ensures reliable clamping and consistent cutting orientation for both external and internal turning applications. Secure clamping and practical hole design Equipped with a cylindrical hole plus single‑side countersink (40°–60°), the insert secures reliably in standard ISO clamping systems and allows straightforward replacement using the appropriate screw set and locating pad. The centred hole design assists in even load distribution, which is beneficial for stable machining and repeatable positioning after re‑indexing. Tailored chip control for turning tasks The insert’s one‑sided chipbreaker is designed to direct and break chips predictably during common turning operations; selecting the correct chipbreaker and grade for the workpiece material and machining stability helps to avoid long, stringy chips and to protect part surfaces. For operations requiring improved evacuation or reduced cutting forces, pairing this insert with suitable cutting parameters and a stable toolholder is advised. Practical application notes and system setup This ISO‑format insert is intended for conventional turning workflows where a robust edge and good thermal resistance are required. The AH8005 grade is particularly suited to heat‑resistant alloys and hard materials when machining conditions are stable. For best results, ensure a compatible toolholder, correct clamp torque and the recommended screw and backing pad are used; these measures secure performance and prolong indexable insert life. For application support or to order the CCMT09T304 AH8005 Tungaloy indexable insert, contact Metav Werkzeuge—technical advice and product availability are provided promptly by our team Technical data Manufacturer article number: 6749953 SKU: 6749953-Tungaloy Manufacturer SKU: TUN6749953 Model series: ISO turning indexable inserts Format designation: CCMT09T304 Facts Corner radius: 0.4 mm Insert size: 09 Thickness: 3.97 mm Lead angle: 80° Clearance angle: 7° Special features Material: carbide Coating: PVD Grade: AH8005 (wear‑resistant) Shape: rhombic Chipbreaker: one‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Typical application: external and internal turning System components: ISO insert, matching external holder or boring bar, backing pad/ clamping set and replacement screw FAQ What materials is this insert suitable for? The CCMT09T304 AH8005 insert is designed for heat‑resistant alloys and hard materials, making the Tungaloy carbide grade appropriate where thermal and abrasive resistance are required. Can this insert be used for internal turning? Yes, the ISO‑format rhombic insert is suitable for both external and internal turning when paired with the correct boring bar or internal holder. How does the one‑sided chipbreaker influence machining? A one‑sided chipbreaker on this insert promotes controlled chip formation in standard turning operations and assists in preventing long, problematic chips under stable cutting conditions. Which key geometry values should be checked for holder compatibility? Verify the insert form, the 80° lead angle, 7° clearance, thickness 3.97 mm and the hole style to ensure proper match with the selected holder and clamping system. What identifies the original article and manufacturer? This indexable insert is supplied as CCMT09T304 AH8005 by Tungaloy; manufacturer article number 6749953 and SKU 6749953‑Tungaloy identify the original product. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8005 grade and precise ISO CCMT09T304 geometry for reliable, repeatable turning performance; order the insert directly via Metav Werkzeuge or consult the technical team if specification advice is required. CCMT 09T304 AH8005 — CCMT turning insert for turning by Tungaloy CCMT09T304 AH8005 is an ISO-format indexable insert for turning, designed for stable machining of heat-resistant alloys and other hard materials in production environments. PVD-coated carbide AH8005 grade ISO CCMT 09T304 geometry 7° relief angle for stable cutting Cylindrical hole with single-side countersink Precision geometry for consistent turning results The rhombic CCMT format with an 80° included angle and a 0.4 mm corner radius provides a predictable cutting edge that supports dimensional consistency across batches. The ISO standardisation of the insert geometry ensures compatibility with matching external holders and boring bars when form, relief angle, tolerance class, fixation and thickness are aligned. By relying on standardised dimensions, process planners achieve stable tool seating and repeatable tool life, which reduces set-up time and limits scrap rates in serial turning operations. Hard-wearing coating and substrate for extended tool life The combination of a PVD coating on a carbide substrate in the AH8005 grade is engineered for wear resistance when machining heat-resistant alloys and other demanding materials under stable cutting conditions. The thin, hard PVD layer improves thermal resistance and reduces flank wear, while the carbide core maintains edge strength. This pairing leads to longer tool life and steadier surface finishes, translating into fewer tool changes and improved machine utilisation in production environments. Practical mounting and application guidance for production use The insert is manufactured with a 3.97 mm thickness, a cylindrical mounting hole with a single-side countersink (40°–60°) and a one-sided chipbreaker suitable for conventional external and internal turning operations. Selection of a matching holder and correct clamping hardware is essential: the system comprises the insert, a compatible external holder or boring bar, a backing/wedge set and the appropriate screw. Choosing the correct chipbreaker and grade relative to workpiece stability and cutting parameters yields the best compromise between material removal rate and surface quality. Contact Metav Werkzeuge for the Tungaloy CCMT09T304 AH8005 insert and discuss application-specific setup with our technical consultants at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6749955 Manufacturer SKU: TUN6749955 Seller SKU: 6749955-Tungaloy Model series: ISO turning indexable inserts Designation: CCMT09T304 AH8005 Core specifications Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Materials & features Material: carbide Coating: PVD Grade: AH8005 Chipbreaker: one-sided Plate form: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning FAQ What materials is this insert designed to machine? The CCMT09T304 AH8005 insert is intended for heat-resistant alloys and other hard materials; the PVD-coated carbide grade AH8005 provides enhanced wear resistance for such applications. How does the ISO format affect tool selection? ISO CCMT09T304 geometry ensures compatibility with standard CCMT holders when form, relief angle, tolerance and fixation match, allowing the CCMT09T304 AH8005 insert to be mounted reliably in production toolholders. What is the purpose of the 7° relief angle? The 7° relief angle on the CCMT09T304 insert provides clearance behind the cutting edge, helping to reduce rubbing and promote stable cutting conditions during turning operations. Which mounting features must be checked before use? Verify the cylindrical mounting hole, the single-side countersink (40°–60°), holder pocket shape and clamp screw compatibility before installing the CCMT09T304 AH8005 insert to ensure secure clamping and correct seating. Can the insert be used for internal turning? Yes; the rhombic form and one-sided chipbreaker of the CCMT09T304 AH8005 insert allow use in both external and internal turning when combined with a suitable boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
A reliable choice for ISO-compliant turning: the combination of PVD-coated carbide AH8015 and a 0.4 mm corner radius delivers durable cutting performance and stable edge life for heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT 09T304 AH8015 — Turning insert, rhombic 80° (Tungaloy) CCMT09T304 AH8015 Tungaloy-Wendeplatte is an ISO‑normed rhombic insert designed for general turning applications where heat resistance and edge stability are required ISO rhombic CCMT 09T304 format PVD-coated carbide AH8015 0.4 mm corner radius, 80° included angle Cylindrical hole with 40°–60° countersink Consistent performance for general turning operations The insert combines a PVD‑coated carbide substrate with the AH8015 grade to balance wear resistance and edge stability in elevated temperatures. This composition is particularly suited to machining heat‑resistant alloys where thermal loads and abrasive wear shorten tool life. By selecting this geometry and grade, production runs benefit from more consistent tool life and reduced flank wear, resulting in fewer tool changes and higher machine uptime. Secure clamping and ISO compatibility for quick changeovers Manufactured to ISO dimensions, the cartridge fits standard holders when form, clearance angle, tolerance class, fastening and thickness match. The insert’s cylindrical hole with single‑side countersink (40°–60°) ensures repeatable seating and a firm clamp, which improves process stability. Compatibility with common external holders and boring bars makes integration into existing tool systems simple and predictable. Geometry engineered for accuracy and surface quality The rhombic 80° included angle with a 0.4 mm corner radius offers a compromise between strength and surface finish: larger radii boost edge robustness for semi‑finishing, while a controlled small radius helps maintain dimensional accuracy. This geometry supports both light finishing and moderately interrupted cuts, helping to achieve consistent workpiece tolerances and improved surface quality with fewer passes. Chip control that supports productivity A single‑side chipbreaker matched to the grade promotes predictable chip formation and evacuation, reducing the risk of built‑up edge and improving process reliability. Combined with the PVD coating, this chip control reduces friction at the cutting zone and assists stable cutting conditions, contributing to higher feed rates where machine and workpiece set‑up allow it. Material scope and recommended applications This grade is specified as a first choice for the general machining of heat‑resistant alloys, offering a balanced approach between cutting edge life and fracture resistance. The insert is intended primarily for turning tasks—external and internal—where thermal stability and edge integrity are decisive. Selection of the correct chipbreaker and holder rigidity remains essential for optimised performance. Practical considerations for workshop implementation With a plate thickness of 3.97 mm and ISO‑standard sizing, the insert forms part of a system including the matching external holder, clamping pads and replacement screws. Assessing holder rigidity and selecting the appropriate feed and cutting speed for the chosen material will prolong tool life and maintain consistent part quality. Regular inspection for flank wear and nose deterioration will signal timely index changes and prevent scrap. For ordering original Tungaloy CCMT inserts or for tailored process advice, contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for specification checks and supply options Technical Data Article number: 6825745 SKU: 6825745-Tungaloy Manufacturer SKU: TUN6825745 Model series: ISO-Drehwendeschneidplatten Item name: CCMT09T304 AH8015 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 09 Included angle: 80° Clearance angle: 7° Special features PVD‑coated carbide (AH8015) Rhombic plate shape, ISO format Single‑side chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) Compatible with ISO standard holders FAQ What materials is this grade suited for? The AH8015 grade is specified for the general machining of heat‑resistant alloys; the PVD‑coated carbide helps maintain edge life under higher cutting temperatures. Is the insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the insert is ISO‑normed for easy matching with standard holders when those parameters align. What effect does the 0.4 mm corner radius have on performance? A 0.4 mm radius increases edge strength for semi‑finishing while maintaining good dimensional control, reducing the likelihood of chipping on interrupted cuts. How does the hole and countersink design affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) provides reliable seating and repeatable clamping, supporting stable cutting conditions and reduced runout. Can this insert be used for internal turning as well as external? Yes; the geometry and grade are suitable for both external and internal turning operations when combined with an appropriate holder and chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide in the AH8015 grade, a 0.4 mm corner radius and robust rhombic geometry for reliable external and internal turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 AH8015 indexable turning insert (ISO) – for turning (Tungaloy) The CCMT 09T304 AH8015 is an ISO rhombic indexable insert designed for general turning of heat‑resistant alloys and stable production environments CCMT 09T304 AH8015 PVD-coated carbide insert Rhombic CCMT geometry, 80° cutting angle 0.4 mm corner radius for medium finishing Single-sided chipbreaker for heat-resistant alloys Engineered for consistent machining of heat-resistant alloys The insert is built on a PVD-coated carbide substrate in the AH8015 grade to offer a balanced combination of wear resistance and edge stability when machining heat‑resistant alloys. This material pairing reduces flank and crater wear under elevated cutting temperatures, which extends tool life and lowers regrinding or replacement intervals. The formulation is suitable for general turning tasks where a compromise between productivity and surface quality is required; the PVD layer further improves oxidation resistance and adhesion between chip and tool, helping to maintain a stable cutting edge during medium‑duty production runs. Robust geometry and secure clamping reduce setup time The rhombic CCMT form with an 80° cutting edge and a 7° relief angle provides versatile cutting orientation for external and internal turning while maintaining good strength at the cutting edge. A thickness of 3.97 mm and the central hole with a cylindrical bore plus a one‑sided countersink (40°–60°) enable consistent clamping in compatible holders and reduce micro‑movement during cutting. Because compatibility depends on form, relief angle, tolerance and thickness, this ISO format integrates with standard CCMT holders and clamping systems, which simplifies inventory and shortens setup time on the shop floor. Optimised chip control and surface finish for production efficiency A single‑sided chipbreaker matched to the grade promotes predictable chip formation on steels and alloys that tend to work‑harden; combined with a 0.4 mm corner radius, the insert delivers a balanced surface finish at moderate feeds while limiting cutting forces. The geometry supports both finishing and light roughing passes, so fewer tool changes are necessary across mixed batches. In production terms this means more uptime, fewer interventions and improved repeatability—factors that convert directly into lower unit costs and steadier part quality in serial machining. For tailored selection of genuine Tungaloy turning inserts and procurement support, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825783 SKU: 6825783-Tungaloy Manufacturer SKU: TUN6825783 Designation: CCMT09T304 AH8015 Material: carbide Core data Corner radius: 0.4 mm Thickness: 3.97 mm Insert size: 09 Cutting angle: 80° Relief angle: 7° Special features Rhombic insert shape Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) ISO turning indexable insert Grade/coating: AH8015, PVD-coated carbide FAQ What materials is this insert suitable for? The CCMT 09T304 AH8015 indexable insert (Tungaloy, SKU 6825783-Tungaloy) is optimised for machining heat‑resistant alloys and offers a good balance of wear resistance and edge stability for general turning tasks. Can this insert be used for internal as well as external turning? Yes, the rhombic CCMT form and the 80° cutting orientation allow the insert to be used for both external and internal turning operations when paired with a compatible holder. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius gives improved tool robustness and is suitable for achieving a medium surface finish while enabling stable cutting at moderate feeds. What benefits does the AH8015 grade provide? The AH8015 PVD‑coated carbide grade combines wear resistance with edge stability, helping to extend tool life and maintain consistent part quality under elevated temperatures. Is the insert compatible with standard CCMT holders? The insert follows ISO CCMT dimensions and, given matching form, relief angle and thickness (3.97 mm), it is compatible with standard CCMT holders and clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade optimised for heat-resistant alloys combined with a rhombic, 80° geometry for reliable external and internal turning; this insert delivers consistent edge life and stable chip control. Order directly via Metav Werkzeuge or consult our advisors for toolholder compatibility and process optimisation. CCMT09T304 AH8015 Tungaloy turning insert — PVD-coated carbide, 0.4 mm corner radius CCMT09T304 AH8015 Tungaloy turning insert for ISO-spec turning applications, engineered for general machining of heat-resistant alloys with balanced wear resistance and edge stability PVD-coated carbide for heat-resistant alloys Rhombic 80° geometry for versatile turning 0.4 mm corner radius for finished contours Cylindrical hole with 40°–60° countersink Consistent cutting performance where heat resistance matters The CCMT09T304 AH8015 insert combines a PVD-coated carbide grade with a geometry tuned for reliable performance on heat-resistant alloys. The coating enhances thermal stability and reduces built-up edge, resulting in a more predictable tool life and fewer interruptions. For production environments that require repeatable surface quality, this insert provides measurable efficiencies through longer runs between indexings and fewer tool changes, helping to maintain a steady machining cycle. Geometry and clamping that support process security A rhombic, 80° approach angle and a 0.4 mm corner radius give a balance between strength and finishing capability. The insert’s cylindrical hole with a single-sided 40°–60° countersink ensures secure fastening and correct seat location in compatible toolholders; the 3.97 mm thickness adds rigidity during interrupted cuts. These design choices reduce vibration and support consistent chip formation, which is particularly important when switching between external and internal turning operations. Grade selection explained for practical results The AH8015 grade is a PVD-coated hardmetal chosen as a first option for the general machining of heat-resistant alloys. It is engineered to offer an even compromise between wear resistance and cutting-edge stability, so operators benefit from fewer edge failures under thermal stress. Where surface finish and predictable tool life are priorities, this grade reduces the risk of unexpected rework and supports higher machine utilisation. System considerations and ease of integration The insert is part of an ISO turning insert system and requires a compatible external holder or boring bar; compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness. Selecting the correct chipbreaker (single-sided on this insert) and matching the holder geometry minimises forced adjustments at the machine and simplifies setup. For production shops that value fast changeovers, the standard ISO form factor eases inventory handling and reduces tooling complexity. For tailored advice on fitting the Tungaloy CCMT09T304 AH8015 insert into your toolholder or to secure prompt delivery via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team will advise on optimal clamping and cutting data Technical data Article number: 6749956 Manufacturer SKU: TUN6749956 SKU: 6749956-Tungaloy Dimensions & measurable data Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Approach angle: 80° Materials & special features Grade/coating: AH8015, PVD-coated carbide Insert shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Model series: ISO turning inserts FAQ What materials is this insert suited for? The AH8015 PVD-coated carbide grade is intended primarily for the general machining of heat-resistant alloys; the CCMT09T304 insert provides a compromise between wear resistance and edge stability for such materials. Which toolholders are compatible with the insert? Compatibility depends on form, clearance angle, tolerance and thickness; the CCMT09T304 is an ISO-format rhombic insert and fits holders designed for ISO CCMT inserts with matching seat and fastening. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius improves edge strength for finishing contours while maintaining the ability to achieve good surface quality; it balances robustness and fine-detail capability in turning operations. Is the insert suitable for internal turning? Yes; the rhombic 80° geometry and standard ISO form make the insert appropriate for both external and internal turning when used with a compatible boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a PVD-coated AH8015 grade for heat-resistant alloys and a compact 0.4 mm corner radius to secure consistent turning results; order genuine inserts via Metav Werkzeuge or consult the team for application-specific advice. CCMT09T304 AH8015 ISO turning insert — PVD-coated carbide, 0.4 mm radius The CCMT09T304 AH8015 indexable insert is an ISO-standard rhombic turning insert designed for external and internal turning of heat-resistant alloys and general-purpose machining. PVD-coated carbide for heat-resistant alloys Rhombic CCMT shape, 80° included angle 0.4 mm corner radius for precise profiling Central hole with countersink for secure clamping Consistent cutting performance that reduces machining cost The balance between wear resistance and edge stability is achieved by the AH8015 grade with its PVD-coated surface, which delivers predictable tool life when machining demanding alloys. This indexable insert is engineered for steady flank-wear behaviour under moderate to high cutting temperatures, so machining cycles remain stable and setup changes are minimised. The economic benefit derives from fewer insert changes and reduced rework, supporting a more efficient production flow without sacrificing surface quality. Secure mounting and ISO compatibility for reliable repeatability Manufactured to ISO dimensions, the insert fits standard CCMT holders when matched by form, relief angle, tolerance class, fixing method, size and thickness. The central feature is a central hole with a countersink (cylindrical hole plus single-sided countersink, 40°–60°), which ensures repeatable clamping and concentric seating in a suitable holder. The combination of standard geometry and secure fixation enhances process reliability and simplifies tool inventory management across multiple machines. Targeted application advice for material and chip control This grade is intended as a first choice for machining heat-resistant alloys where a compromise between long life and edge toughness is required. The single-sided chipbreaker supports controlled chip formation for many turning operations; selecting the correct chipbreaker and insert grade according to workpiece material, cutting parameters and machine stability will yield the best results. The plate’s rhombic form and 80° included angle favour general turning and profiling tasks, offering versatility across external and internal operations. Practical handling, geometry and setup benefits With a corner radius of 0.4 mm, an included angle of 80° and a plate thickness of 3.97 mm, the insert allows fine profile definition while maintaining sufficient edge strength for interrupted cuts. The 7° relief angle aids in reducing rubbing and heat build-up, improving surface finish and reducing the tendency to form built-up edge. As an indexable solution, the insert supports rapid seat replacement and lower downtime compared with brazed tools, helping to keep throughput high in serial production. Contact Metav Werkzeuge for application-specific recommendations and to obtain genuine Tungaloy CCMT09T304 AH8015 inserts; technical advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6749960 Manufacturer SKU: TUN6749960 SKU: 6749960-Tungaloy Material: carbide Designation: CCMT09T304 Facts Corner radius: 0.4 mm Thickness: 3.97 mm Included angle: 80° Relief angle: 7° Size designation: 09 Special features PVD-coated carbide grade AH8015 Rhombic plate form (CCMT) Central hole with cylindrical bore and single-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard turning insert for external and internal turning FAQ What materials is this insert best suited for? The CCMT09T304 AH8015 insert is intended primarily for machining heat-resistant alloys and is a versatile choice for general turning tasks where a balance of wear resistance and edge stability is required. Which holders are compatible with this insert? Compatibility depends on holder geometry and specification; the CCMT09T304 follows ISO dimensions, so holders matching the CCMT form, size 09 and corresponding tolerance class will be suitable. How does the clamping design affect repeatability? The central hole with a cylindrical bore and single-sided countersink (40°–60°) on the CCMT09T304 promotes secure seating and repeatable clamping, improving concentricity and process stability. What chip control features are included? This insert is supplied with a single-sided chipbreaker to support controlled chip formation; the choice of chipbreaker should be matched to material, cutting conditions and machine rigidity. What geometry details aid in profiling and strength? The combination of a 0.4 mm corner radius, 80° included angle and 3.97 mm thickness gives a balance of precise profile capability and sufficient edge strength for many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade optimised for heat-resistant alloys and a precise 0.4 mm nose radius for consistent edge stability and surface finish. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. CCMT09T304 AH8015 indexable turning insert — ISO rhombic 80°, PVD-coated carbide, Tungaloy The CCMT09T304 AH8015 is an ISO rhombic 80° indexable insert for turning, designed for general machining of heat-resistant alloys where balanced wear resistance and cutting-edge stability are required. PVD-coated carbide for heat-resistant alloys Balanced wear resistance and edge stability 0.4 mm nose radius for precise profiling ISO 80° rhombic form with cylindrical hole Consistent cutting performance for demanding alloys The combination of the AH8015 grade and PVD-coated carbide provides a balance between wear resistance and edge robustness that is particularly beneficial when machining heat-resistant alloys. This material pairing reduces flank wear under elevated temperatures and extends useful tool life, which contributes to lower tooling costs per component. The modest nose radius and stable cutting geometry support repeatable surface quality while the single-sided chipbreaker helps to control chip formation during standard turning tasks. Clear compatibility and straightforward clamping for reliable setup As an ISO indexable insert, compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic 80° shape and the 7° relief are standard references that ease holder selection; the with hole design (cylindrical hole plus single-side countersink at 40°–60°) simplifies secure fastening and repeatable seating. These aspects reduce setup time and make inserts interchangeable across matched holders, supporting predictable production runs and faster changeovers. Edge control and chipforming tuned to practical machining needs The integrated single-sided chipbreaker and the AH8015 substrate offer controlled chip formation and a reliable cutting edge during medium-duty turning. For operations that require a blend of durability and edge stability, this combination keeps the cutting edge intact longer and reduces unplanned tool changes. The insert supports both external and internal turning when paired with an appropriate holder and clamping set, enabling versatile use across common lathe applications. Practical application advice and workshop integration The plate thickness of 3.97 mm, the 80° rhombic outline and the 0.4 mm nose radius make this insert suitable for profiling, general finishing and stable roughing in restrained setups. Select the chipbreaker and grade according to workpiece material and machine rigidity; for example, choose a stiffer setup for heavier cuts to preserve edge life. Check holder compatibility before installation and ensure correct torque for clamping screws and proper seating on the support shim to maintain repeatable results. For machining advice or supply of Tungaloy CCMT09T304 AH8015 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt delivery. Technical data Article number: 6749954 Dimensions / Key figures Nose radius: 0.4 mm Thickness: 3.97 mm Size: 09 Clearance angle: 7° Corner angle: 80° Special features Material: carbide, PVD-coated (AH8015) Single-sided chipbreaker Rhombic 80° form With cylindrical hole + single-side countersink (40°–60°) ISO turning insert series Typical application: turning (external and internal) FAQ Which materials is this insert best suited for? The CCMT09T304 AH8015 insert is formulated for machining heat-resistant alloys, offering a compromise between wear resistance and edge stability that favours performance in such materials. What is the nose radius and what does it mean for finishing? The nose radius is 0.4 mm; this allows finer profile control and improved surface finish while still providing enough strength for routine turning operations with moderate depths of cut. How is the insert secured in the holder? The plate is supplied with hole—a cylindrical hole plus a single-side countersink (40°–60°)—and requires a compatible clamping system, support shim and the correct screw to ensure repeatable seating and clamping force. Can this insert be used for internal turning? Yes, when mounted in a suitable boring bar or internal holder the insert supports internal turning; ensure holder geometry matches the ISO 80° rhombic form and clearance specifications. What chip control does the insert provide? The insert features a single-sided chipbreaker designed to improve chip control during standard turning, helping to maintain stable cutting conditions and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade focused on surface finish, a precise 0.4 mm nose radius, and ISO compatibility for reliable finishing operations; order the insert via Metav Werkzeuge or consult the technical team for application support. CCMT 09T304 AT9530 — Turning insert, coated cermet (0.4 mm nose radius) by Tungaloy A CCMT 09T304 AT9530 turning insert engineered for finishing and light turning of steel with ISO-standard form and mounting compatibility CCMT 09T304 ISO turning insert Coated cermet grade AT9530 0.4 mm nose radius for fine finish Cylindrical hole with single-sided countersink Consistent surface quality and controlled wear The insert is manufactured in a coated cermet grade (AT9530) that emphasises surface finish and uniform wear rather than aggressive metal removal. The combination of the 0.4 mm nose radius and a dedicated single-sided chipbreaker produces a stable cutting edge that reduces edge chipping during finishing passes. This results in longer intervals between edge changes and a more predictable component finish, which supports higher first-pass yield and fewer rework operations. The cermet coating lowers adhesion and helps maintain a sharp geometry at low to moderate feeds. Simple integration into ISO tooling systems Designed to the ISO designation CCMT09T304, the insert fits standard rhombic holders when form, 7° clearance angle, tolerance class, fastening and thickness are matched. The rhombic form with an included angle of 80° and a 3.97 mm thickness provides a secure seating in compatible clamping systems; the insert’s cylindrical hole with one-sided countersink (40°–60°) is suitable for common screw clamping designs. Compatibility depends on matching the insert geometry and tolerance class to the toolholder — selecting the correct combination ensures repeatable positioning and stable cutting conditions. Application focus: efficient finishing and light turning of steel Optimised for finishing and light turning of steel, the grade balances wear resistance and edge sharpness to deliver high surface integrity on external and internal profiles. The insert performs best with a stable setup and moderate cutting speeds where the cermet’s properties can produce superior finishes and even wear patterns. For different materials or heavier cuts, choose an appropriate chipbreaker and grade to match the workpiece and machining stability; for finishing tasks, the current configuration reduces the need for secondary polishing and supports efficient downstream processes. For application advice, toolholder compatibility checks or ordering the Tungaloy CCMT 09T304 AT9530 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and quick delivery options Technical data Article number: 6732746 SKU: 6732746-Tungaloy Manufacturer SKU: TUN6732746 Model series: ISO turning inserts Material: cemented carbide Numbers Size: 09 ISO code: 09T304 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features ISO designation CCMT09T304 Coated cermet grade AT9530 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning; finishing and light machining of steel FAQ Is this insert suitable for internal turning operations? The Tungaloy CCMT 09T304 AT9530 insert is designed for both external and internal turning when used with an appropriate holder and setup; the rhombic form and secure clamping via the cylindrical hole support internal applications. Which materials is the AT9530 grade best for? The AT9530 coated cermet grade is optimised for finishing and light turning of steel, offering improved surface integrity and even wear for such applications. What must be checked to ensure holder compatibility? Compatibility is determined by insert form, 7° clearance angle, tolerance class, fastening method, size and 3.97 mm thickness; confirm the toolholder accepts CCMT inserts and the mounting (hole and countersink) matches the clamping system. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius produces a finer profile on turned parts and helps maintain consistent geometry at finishing feeds, supporting reduced vibration and improved surface appearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 DX120 Wendeplatten - Tungaloy
Benefit from the combination of PCD cutting performance, extended service life and ISO-standard fit for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT 09T304 DX120 — CCMT indexable insert for turning by Tungaloy The CCMT09T304 DX120 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for aluminium, non‑ferrous metals and abrasive non‑metals and suited to high cutting speeds. PCD grade DX120 for high speeds Long tool life with very low wear ISO rhombic CCMT 09T304 form One-sided chipbreaker, 0.4 mm corner radius Consistent performance at high cutting speeds The DX120 grade uses polycrystalline diamond (PCD) to deliver exceptionally high cutting speeds and very long tool life when machining aluminium and other non‑ferrous materials. PCD cutting edges combine extreme hardness with a wear‑resistant microstructure, which reduces flank wear and keeps cutting parameters stable over long production runs. For operations where cycle time and consistent part quality determine cost per piece, this insert provides a clear efficiency advantage and lowers tool change frequency. ISO compliance and secure clamping for predictable results Supplied as an ISO-standard CCMT form, compatibility with the clamping system is defined by geometry, clearance, tolerance class, fixing method, size and thickness. The insert is supplied with a cylindrical hole plus one‑sided countersink (40°–60°) to match standard holders and clamp plates. The combination of a defined 7° clearance angle and 3.97 mm thickness ensures reliable seating and repeatable positioning, which translates to predictable dimensional control and reduced setup time when replacing inserts in production. Geometry tuned for finish and chip control The rhombic shape with an 80° geometry and a 0.4 mm corner radius delivers a balance between robustness and finishing capability. The one‑sided chipbreaker controls chip formation for thin, curled chips when turning softer materials and abrasive composites, improving evacuation and reducing the risk of built‑up edge. These design choices help maintain a steady surface quality while protecting the cutting edge during interrupted cuts. System advantages and practical application notes As part of a complete tool system the insert works with the appropriate external holder or boring bar, a supporting shim/clamp set and standard replacement screws. The PCD grade DX120 is especially economical for high‑volume aluminium components and abrasive non‑metallic materials where oxidation and edge wear limit carbide life. Selection of the matching chipbreaker and grade according to workpiece stability and machining strategy will maximise throughput and reduce overall tooling costs. Contact Metav Werkzeuge for tailored selection and delivery information on Tungaloy PCD inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6822154 Manufacturer SKU: TUN6822154 SKU: 6822154-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Core dimensions ISO designation: CCMT09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Geometry angle: 80° Features & Compatibility Grade/coating: DX120 Cutting material: polycrystalline diamond (PCD) Application: turning (external and internal) Chipbreaker: one‑sided Hole: with cylindrical hole + one‑sided countersink (40°–60°) Insert shape: rhombic Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The CCMT09T304 DX120 grade is designed for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, offering high cutting speeds and prolonged edge life. Can the insert be used for both external and internal turning? Yes, the ISO‑standard rhombic form and the mounting hole with countersink make the insert suitable for external turning and for use on appropriate boring bars for internal operations. How does the PCD grade affect machining strategy? PCD provides very high wear resistance and stable cutting at increased speeds; for the DX120 grade this means fewer tool changes and more predictable process windows for high‑volume production. Which holders are compatible with this insert? Compatibility depends on the CCMT form, 7° clearance, 3.97 mm thickness and the hole/countersink specification; matching ISO‑compatible external holders or boring bars with the correct clamp/screw arrangement are required. What is the article number and manufacturer SKU for ordering? Article number 6822154, manufacturer SKU TUN6822154 correspond to the CCMT09T304 DX120 indexable insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Reliable wear resistance from the GH730 grade and precise chip control from the single-sided chipbreaker ensure productive turning with reduced downtime; the 0.4 mm nose radius and 80° rhombic geometry deliver consistent surface finish and repeatable clamping. Order the CCMT09T304 insert via Metav Werkzeuge or consult the technical team for process-adapted selection. CCMT 09T304 GH730 Tungaloy ISO turning insert — rhombic, 80° included angle, 0.4 mm radius The CCMT09T304 GH730 Tungaloy ISO turning insert is designed for external and internal turning, combining a robust carbide grade with a controlled chipforming geometry for stable, high-productivity machining. ISO rhombic insert CCMT 09T304 GH730 grade for wear resistance 80° cutting geometry for stable engagement 0.4 mm nose radius for fine finishing High-performance grade for longer tool life and stable cutting The combination of the GH730 cutting grade and a solid carbide substrate delivers a good balance of wear resistance and edge toughness, which supports longer tool life in demanding turning operations. The single-sided chip control geometry complements the grade by directing chips reliably away from the cutting zone, reducing interruptions and minimising tool-change frequency. This results in a measurable improvement in process uptime and consistent part quality when compared with less optimised insert grades. Geometry and clamping designed for repeatability and rigidity The rhombic ISO plate with an 80° included angle and a 7° clearance ensures secure seating in matched holders and predictable engagement during both external and internal turning. The insert includes a cylindrical centre hole with a one-sided countersink (40°–60°), and a plate thickness of 3.97 mm that supports stable clamping under moderate cutting forces. These dimensions contribute to repeatable positioning and reduced vibration, which together improve surface finish and dimensional stability across production runs. Process guidance: application scope and finishing capability Intended primarily for turning operations, the insert is suited to a wide range of machining tasks where the balance between wear resistance and edge stability is essential. The 0.4 mm nose radius helps achieve superior surface quality on fine finishing passes, while the single-sided chipbreaker should be chosen to match the workpiece material, cutting parameters and machine rigidity. For different batch sizes or materials, selecting the appropriate chipbreaker and cutting data will directly affect cycle times and overall machining economy; technical advice is available for process optimisation. For tailored advice on integrating the Tungaloy CCMT09T304 GH730 insert into specific turning processes, contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical data Article number: 6820970 Manufacturer SKU: TUN6820970 Label: CCMT09T304 GH730 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core technical data Carbide plate thickness: 3.97 mm Nose radius: 0.4 mm Included angle: 80° Clearance angle: 7° Plate size: 09 Special features Grade: GH730 Chipbreaker: one-sided Plate form: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Application: turning Material: carbide ISO designation: CCMT09T304 FAQ What work is this insert intended for? The CCMT09T304 GH730 insert is intended for external and internal turning and is optimised for stable chip control and wear resistance in general turning operations. How does the GH730 grade affect performance? The GH730 grade provides an improved balance between wear resistance and edge stability, which helps maintain tool life and consistent cutting performance under normal turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, clearance, tolerance class, fastening method, size and plate thickness; matching those parameters ensures proper seating of the CCMT09T304 insert. What finishing quality can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius supports fine finishing passes and can deliver improved surface finish when combined with appropriate feeds and speeds and a stable clamping setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, a 0.4 mm corner radius and ISO compatibility for steady, predictable turning performance; order original inserts via Metav Werkzeuge or request advice from our consultants to match grade and chipbreaker to the specific machining task. CCMT09T304 GH730 — CCMT turning insert by Tungaloy, 0.4 mm corner radius CCMT09T304 GH730 is an ISO‑standard indexable turning insert engineered for both external and internal turning operations where edge stability and repeatable wear behaviour are required. ISO-standard rhombic CCMT geometry GH730 grade for wear resistance 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Consistent tool life through a balanced carbide grade The GH730 composition, supplied by Tungaloy and applied to this indexable insert, provides a deliberate balance of wear resistance and toughness that helps maintain cutting-edge integrity under varied turning conditions. As a cemented carbide product, the insert resists abrasive wear while the grade optimises edge support; this reduces the frequency of edge changes and contributes to a more predictable tool life. Selecting a matching chipbreaker and application-specific grade minimises downtime and supports consistent component tolerances. Precise geometry for reliable mounting and repeatability Designed to ISO specifications, the rhombic CCMT form ensures compatibility with matching holders when the shape, relief angle, tolerance class, clamping style, size and thickness are observed. The insert features an 80° included angle and a 7° relief angle, with a plate thickness of 3.97 mm, which together provide a secure seat in the toolholder and repeatable positioning for serial production. The through-hole is cylindrical with a single‑side countersink (40°–60°) to suit standard clamping systems, aiding fast replacement and stable performance in both external and internal operations. Practical benefits for everyday turning workpieces With a corner radius of 0.4 mm, the insert offers a compromise between strength and finish capability: small enough for tighter radii yet robust enough to withstand interruptions or moderate feeds. The single-sided chipbreaker geometry supports controlled chip formation in a wide range of turning tasks; choosing the correct chipbreaker and the GH730 grade helps manage temperature and chip flow, which improves surface quality and reduces secondary operations. System assembly typically comprises the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws for quick servicing and minimal downtime. Integration into production and selection guidance For smooth integration into machining routines, consider the workpiece material, machine stability and cutting parameters when specifying the insert and holder. The insert is intended for turning and is part of an ISO insert system; matching the insert geometry and the GH730 material grade to the part geometry and cutting strategy yields the best balance of productivity and component quality. If further clarification is needed on holder compatibility or optimal cutting data, our technical team can provide guidance and help define the most economical setup. Contact Metav Werkzeuge for tailored advice on selecting Tungaloy CCMT09T304 GH730 inserts and to secure original factory‑new items directly through our distribution. Technical data Article number: 6820969 Manufacturer article number: 6820969 SKU: 6820969-Tungaloy Manufacturer SKU: TUN6820969 Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T304 GH730 Tungaloy‑insert Material: cemented carbide Facts Included angle: 80° Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Size: 09 Special features Grade: GH730 (Tungaloy) Rhombic CCMT plate form Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard indexable turning insert System assembly: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The CCMT09T304 GH730 indexable turning insert is designed for general turning; the GH730 grade complements the geometry by providing a balance of wear resistance and toughness suitable for a broad range of turning applications. How does the 0.4 mm corner radius affect cutting results? A 0.4 mm corner radius on the CCMT09T304 GH730 insert offers a compromise between edge strength and surface finish, enabling moderate feeds with good edge life while allowing tighter profile details than larger radii. Which holders are compatible with this ISO CCMT insert? Compatibility depends on holder form, relief angle, tolerance class, clamping style, size and thickness; the CCMT09T304 GH730 fits standard CCMT holders when these parameters match the insert specifications. Is the insert supplied as original Tungaloy product? Yes, the CCMT09T304 GH730 insert is supplied as an original, factory‑new product from Tungaloy; reference SKU 6820969‑Tungaloy for ordering and verification. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of the GH730 grade’s balanced wear resistance and toughness and the precise 80° rhomboid geometry for stable turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 GH730 turning insert — ISO rhomboid, 80° approach angle (Tungaloy) A CCMT09T304 GH730 indexable insert engineered for external and internal turning, featuring a rhomboid form, a single-sided chipbreaker and a cylindrical hole with a one-sided countersink. ISO rhombic insert, 80° cutting angle GH730 grade for wear resistance and toughness 0.4 mm corner radius for precise finishing Cylindrical hole with 40°–60° countersink Consistent machining performance for turning The CCMT09T304 is built on a carbide substrate and the GH730 grade, which complements the insert geometry to provide a deliberate balance between wear resistance and edge toughness. This balance reduces unexpected tool failure and sustains cutting performance across longer tool life cycles, making the insert suitable for a wide range of turning tasks. The integrated chip control and edge stability lead to fewer interruptions during batch runs and a more predictable production output. Secure seating and accurate tool engagement As an ISO-standardised rhomboid insert with an 80° approach angle and a 3.97 mm plate thickness, the component is dimensioned to ensure repeatable seating in compatible holders. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the supplied cylindrical hole with a one-sided countersink (40°–60°) facilitates secure clamping and accurate axial positioning. Reliable mechanical engagement reduces micro-movement during heavy cuts, which in turn improves dimensional consistency on turned components. Improved productivity through stable chip control and finishing The single-sided chipbreaker provides optimised chip formation for many turning operations, helping to evacuate swarf efficiently and maintain a stable cutting zone. The 0.4 mm corner radius offers a compromise between surface finish and edge strength, enabling fine finishing passes without sacrificing robustness. Together, the geometry and grade support higher metal removal rates where process security is required, while lowering the frequency of insert changes — a clear contribution to operational economy and time-saving on the shop floor. For consistent results with Tungaloy’s GH730 grade and to discuss holder compatibility or batch supply, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820968 SKU: 6820968-Tungaloy Manufacturer SKU: TUN6820968 Numbers / Core technical data Insert designation: CCMT09T304 Approach angle: 80° Corner radius: 0.4 mm Plate thickness: 3.97 mm Insert size: 09 Designs / Special features Rhomboid insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Carbide grade GH730 ISO-standardised turning insert FAQ Is this insert suitable for both external and internal turning? Yes. The CCMT09T304 GH730 insert is designed for external and internal turning; selection of the chipbreaker and grade should be matched to the workpiece material and the machining conditions. What determines compatibility with a tool holder? Compatibility is set by insert form, relief (frewinkel), tolerance class, fastening method, size and thickness; the CCMT09T304’s cylindrical hole plus countersink ensures secure clamping in holders designed for ISO rhomboid inserts. Which machining benefits does the GH730 grade provide? The GH730 grade adds a balance of wear resistance and toughness to the geometry, enhancing edge stability and extending useful tool life in a variety of turning operations. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius offers improved edge strength while enabling a fine surface finish on finishing passes; it is suitable where dimensional accuracy and good surface quality are required. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker is engineered to control chip formation and evacuation during turning, promoting a stable cutting zone and reducing the risk of chip interference with the workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of wear-resistant finishing, stable chip control and precise geometry to increase machining consistency and reduce tool changes; the compact design and secure clamping make it suitable for high-volume turning of steel components. Order the CCMT09T304 GT9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T304 GT9530 CCMT turning insert by Tungaloy – coated cermet, 0.4 mm nose radius CCMT09T304 GT9530 is a coated turning insert designed for precision finishing and light general-purpose turning of steel components ISO rhombic insert CCMT geometry Coated cermet grade GT9530 for finishing 0.4 mm nose radius for fine profiles With central hole and 40°–60° countersink Consistent finishing and longer tool life for steel turning The coated cermet composition of this insert, combined with the GT9530 grade, delivers a wear-resistant cutting edge that maintains surface integrity over extended runs. In practical terms, the advanced coating and substrate increase resistance to abrasion and maintain sharpness during stable machining conditions, which means fewer indexings and reduced downtime. This behaviour is particularly effective when fine surface quality is a priority; the result is a reliable, repeatable finish with lower scrap rates and improved throughput. Secure seating and geometry that simplifies setup Built to the ISO-standard dimensional system, the rhombic profile guarantees predictable seating and orientation in compatible toolholders. The rhombic shape with an integrated central hole and a cylindrical bore plus one-sided countersink (40°–60°) ensures solid clamping and accurate location during cutting. A 7° clearance reduces rubbing on the flank, while the plate thickness of 3.97 mm and standard size designation help ensure compatibility with a wide range of external holders and boring bars. For operators less familiar with insert mounting: check holder form, clearance angle, tolerance class, fastening method, size and thickness to confirm compatibility before first use. Practical guidance for tool selection and application The single-sided chipbreaker and the 0.4 mm nose radius are optimised for fine profiles and finishing passes; select the chipbreaker and the GT9530 grade when workpiece material and machine stability favour surface quality over aggressive metal removal. In settings where stable setups and moderate feed rates are achievable, the combination of wear-resistant cermet substrate and tailored chip control supports longer intervals between regrinds or indexings, improving process economy. For light turning operations on steel, this insert supports predictable chip formation and consistent dimensional accuracy, helping to streamline production planning and reduce rework. For precision finishing with extended tool life, request the Tungaloy GT9530 CCMT09T304 insert from Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 to confirm holder compatibility and optimal cutting data Technical data Article number: 6998305 Manufacturer SKU: TUN6998305 Metav SKU: 6998305-Tungaloy Model series: ISO turning inserts Name: CCMT09T304 GT9530 Tungaloy insert Specifications Corner radius: 0.4 mm Plate thickness: 3.97 mm Clearance angle: 7° Included angle (geometry): 80° Plate size: 09 Features Material: carbide Coating / grade: GT9530 (coated cermet) Plate form: rhombic Chipbreaker: single-sided Hole style: central cylindrical hole + one-sided countersink (40°–60°) Application: turning FAQ Is this insert suitable for finishing steel components? Yes. The GT9530 coated cermet insert is intended for wear-resistant finishing and light universal turning of steel; the grade provides improved surface quality and longer life under stable machining conditions. Which holder parameters determine compatibility with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, plate size and thickness; verify these features against the CCMT09T304 specification before mounting. What does the 0.4 mm nose radius mean for part quality? A 0.4 mm nose radius yields finer profile detail and smoother surface finish on turned parts, making the insert suitable for finishing passes and dimensional-critical features. Can this insert handle more aggressive roughing passes? The GT9530 grade is optimised for finishing to light general-purpose use; for aggressive roughing, a different grade or a tougher chipbreaker should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com