CCMT 09T302 GH730 Wendeplatten - Tungaloy
Take advantage of reliable cutting performance and long edge life thanks to the GH730 grade and robust carbide substrate; the ISO rhombic geometry with a 0.2 mm nose radius delivers consistent surface finish and repeatable results. Order directly via Metav Werkzeuge or contact the team for individual machining advice. CCMT09T302 GH730 Tungaloy turning insert — ISO rhombic insert for external and internal turning CCMT09T302 GH730 is an ISO-standard indexable insert designed for turning applications; it pairs with compatible external holders and boring bars to provide stable machining across a wide range of steels and general turning tasks ISO rhombic CCMT 09 geometry GH730 carbide grade for durable cutting edges 0.2 mm nose radius for predictable finishes 7° clearance angle for secure cutting action Consistent cutting performance for productive turning The GH730 grade, built on a wear-resistant carbide substrate, provides a balanced combination of edge stability and toughness. This balance reduces unplanned tool changes and supports higher process reliability during continuous operation. With its single-sided chipbreaker and defined 0.2 mm nose radius, the insert produces a controlled chip form and a consistent surface finish, which contributes to shorter downstream operations and less rework. Choosing the correct chipbreaker and grade for the workpiece material supports cycle-time reduction and optimised tool costs. Geometry and mounting that simplify tool selection The ISO rhombic form and the CCMT designation make selection straightforward for users familiar with ISO insert systems. The insert’s compatibility with holders is determined by form, clearance angle (7°), tolerance class, fixing method, size and thickness. The presence of a cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and reliable repeatability in clamped assemblies. For workshops standardising toolholders, this geometry allows rapid interchangeability and predictable performance across different machine models and setups. Robust grade and dimensions for dependable results With a plate thickness of 3.97 mm and the GH730 chemistry, the insert resists flank wear while maintaining a stable cutting edge under typical turning loads. The ISO standard designation facilitates inventory management and reduces sourcing complexity. The combination of carbide construction and Tungaloy’s design focus supports extended tool life and consistent part quality, which is especially valuable in batch production and repetitive turning tasks. Technical enquiries about optimised cutting data and holder pairing are welcome to ensure the best process outcome. Contact Metav Werkzeuge for tailored recommendations on selecting the correct Tungaloy GH730 CCMT insert for your turning application and to receive detailed machining parameters. Technical data Article number: 6820966 SKU: 6820966-Tungaloy Manufacturer article number: 6820966 Manufacturer SKU: TUN6820966 Series: ISO turning indexable inserts Material: carbide Facts Size: 09 ISO code: 09T302 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Special features Grade: GH730 Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What turning operations is this insert suited for? The CCMT09T302 GH730 Tungaloy turning insert is intended for both external and internal turning where a 0.2 mm nose radius and a single-sided chipbreaker deliver reliable chip control and surface finish. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, 7° clearance angle, tolerance class, fixing method, size and thickness; the CCMT ISO designation ensures broad compatibility with standard CCMT holders and boring bars. What materials can be machined with this grade? The GH730 grade on a carbide substrate is designed as a versatile option for a wide range of steels and general turning tasks; select the chipbreaker and cutting data to match the specific workpiece material and operation. How does the insert’s hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in the pocket, reducing runout and enhancing repeatability in production setups. What finish and tolerances can be expected with the 0.2 mm radius? A 0.2 mm nose radius typically provides a good balance between strength and surface finish; it supports predictable edge engagement and can help meet typical finishing tolerances when combined with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 GH730 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, a precise 0.2 mm corner radius and ISO‑standard form for predictable, high‑quality turning results; order via Metav Werkzeuge or consult our advisors for holder recommendations. CCMT09T302 GH730 CCMT turning insert — Tungaloy ISO rhombic insert, 0.2 mm radius A CCMT09T302 GH730 indexable insert designed for ISO‑standard external and internal turning, delivering stable cutting edges and reliable chip control. GH730 grade for improved wear resistance 0.2 mm corner radius for fine surface finishes ISO rhombic CCMT form for holder compatibility Central hole with 40°–60° countersink for secure clamping Predictable cutting performance with high edge stability The GH730 carbide grade combines wear resistance and toughness to support consistent tool life under varying turning conditions. The CCMT09T302 geometry, with its 0.2 mm corner radius and 7° clearance, helps to balance surface finish and strength at the cutting edge; a small radius reduces chatter and improves finish at modest feeds, while the specified clearance angle minimises rubbing on the flank. The single‑sided chipbreaker offers controlled chip formation for many turning tasks, reducing the risk of built‑up edge and easing swarf management for shorter cycle times and fewer interruptions. System compatibility and secure clamping for reliable results Compatibility with the toolholder is governed by the insert’s form, ISO‑standard designation, clearance angle, tolerance class, clamping type, size and thickness. The rhombic CCMT form ensures interchangeability with matching external holders and boring bars, while the central hole with cylindrical bore plus one‑sided countersink (40°–60°) provides a repeatable seating and clamping interface. A complete system includes the indexable insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws; selecting the correct combination is essential for repeatable geometrical accuracy and process stability. Practical application scope and production benefits Intended for general turning operations, the insert suits both external and internal turning where a moderate corner radius and robust edge are required. Its carbide construction and the GH730 grade prioritise productivity by extending tool life and maintaining a stable cutting edge under fluctuating loads. This leads to fewer insert changes, lower machine downtime and a more predictable part quality — advantages that directly support efficient production workflows and consistent surface finishes. For customers seeking guidance on grade selection or chipbreaker pairing for specific workpiece materials, targeted advice is available to align insert choice with machining stability and finish requirements. For consistent, high‑productivity turning with the GH730 grade, contact Metav Werkzeuge for tailored holder recommendations or to arrange a supply of CCMT09T302 Tungaloy inserts via our sales team. Technical data Article number: 6820967 Manufacturer SKU: TUN6820967 Model series: ISO‑turning indexable inserts Numbers / Core technical data Insert designation: CCMT09T302 Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included hole: with hole (cylindrical + one‑sided countersink 40°–60°) Designs / Special features Geometry: rhombic (CCMT) Chipbreaker: single‑sided Material: carbide Grade: GH730 System components: insert, holder, shim/clamp set, replacement screws FAQ What turning tasks is this insert suited for? The CCMT09T302 GH730 insert is intended for ISO‑standard external and internal turning where a moderate corner radius and reliable edge stability are required, covering common finishing and semi‑finishing operations. How does the 0.2 mm corner radius affect the surface finish? A 0.2 mm radius reduces the likelihood of chatter at moderate feeds and improves surface quality compared with larger radii; the GH730 grade helps maintain edge integrity to preserve finish over longer cycles. Which holders are compatible with this insert? Compatibility depends on form and ISO designation; holders designed for CCMT inserts with matching size, thickness and clamping style will fit. The central hole and countersink ensure secure seating in standard CCMT holders. What is the benefit of the single‑sided chipbreaker? A single‑sided chipbreaker provides consistent chip control in a range of cutting conditions, improving swarf handling and reducing the risk of chip entanglement during turning. Can this insert be used for hardened materials? The insert’s GH730 grade offers a balance of wear resistance and toughness suited to a broad spectrum of steels and common turning materials; for highly hardened alloys, verify suitability against specific hardness ranges and machining parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, extended tool life and secure clamping for reliable turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. CCMT 09T302 GT9530 — Tungaloy indexable turning insert for turning, coated cermet, 0.2 mm corner radius CCMT 09T302 GT9530 is a rhombic ISO indexable insert for turning, optimised for finishing to light universal operations in steel. Coated cermet grade GT9530 0.2 mm corner radius for fine surface finish 7° relief angle with 80° rhombic geometry Cylindrical hole with 40°–60° countersink Reliable finishing and longer tool life for steel turning The coated cermet specification GT9530 delivers a balance between surface quality and extended tool life, making this insert well suited to finishing and light general-purpose turning of steel. The coating reduces adhesive wear and improves thermal stability under steady cutting conditions, which results in a more consistent part finish and fewer changeovers. This grade is particularly effective where a combination of surface finish and sustained performance is required in production runs. Secure clamp interface and ISO compatibility Designed as an ISO indexable insert, compatibility with a clamping system is governed by insert form, relief angle, tolerance class, fastening style, size and thickness. The central cylindrical hole with a one-sided countersink (40°–60°) ensures reliable seating and repeatable positioning in standard holders and boring bars. The ISO conformity simplifies tool inventory and reduces setup time by enabling interchangeability across appropriately specified holders. Precision geometry for predictable chip control and accuracy The corner radius 0.2 mm and one-sided chipbreaker promote fine finishing and predictable chip formation during low to moderate depths of cut. The 7° relief angle and 80° rhombic geometry support stable cutting and access to tight features, while the insert thickness of 3.97 mm provides sufficient support for the cutting edge. These geometry choices reduce vibration and help maintain dimensional accuracy, particularly important in finishing passes and close-tolerance turning. Process guidance for productive, stable machining For productive and stable machining, select the chipbreaker and grade that match the workpiece material, machining parameters and fixture rigidity. The insert is tailored for turning applications where consistent cutting conditions are maintained; the combination of GT9530 performance and insert geometry can reduce tool change frequency and support higher overall process efficiency. Technical consultation is available for matching insert grade and chipbreaker to specific steels and turning strategies. For precision finishing in steel applications, choose Tungaloy’s GT9530-coated CCMT 09T302 insert and contact Metav Werkzeuge for tailored application advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6998300 Manufacturer SKU: TUN6998300 SKU: 6998300-Tungaloy Model series: ISO indexable turning inserts Cutting grade: GT9530 Base material: cemented carbide Facts Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Insert thickness: 3.97 mm Insert size: 09 Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic insert geometry One-sided chipbreaker Coated cermet grade GT9530 Intended for finishing to light universal turning of steel Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The CCMT 09T302 GT9530 insert is intended primarily for turning of steel and is optimised for finishing to light general-purpose operations. How does the GT9530 coating affect tool life? The GT9530-coated cermet improves wear resistance and thermal stability, which extends the service life of the insert in stable cutting conditions. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO indexing standards; compatibility depends on holder form, relief angle, tolerance class, fastening and insert size/thickness. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a one-sided countersink ensures secure seating and repeatable clamping in compatible holders and boring bars. Which chipbreaker should be chosen for finishing operations? For finishing, select a chipbreaker that promotes small, controllable chips; the one-sided chipbreaker on this insert is designed to support fine surface finishes and stable cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the rhombic CCMT geometry for reliable, high‑quality turning with low cutting forces and excellent surface finish; order directly via Metav Werkzeuge or request an application check from our consultants. CCMT 09T302 NS9530 Tungaloy turning insert, uncoated cermet, 7° relief A CCMT09T302 NS9530 Tungaloy rhombic turning insert designed for finishing operations on steel with a sharp cutting edge and single‑sided chipbreaker Finishing cermet grade NS9530 Sharp cutting edge with low cutting forces Rhombic CCMT shape, 80° cutting angle Single‑sided chipbreaker with through‑hole fastening Higher product quality through optimised finishing performance The ISO turning insert is specified for finishing tasks and delivers a consistently fine surface finish thanks to the uncoated cermet grade NS9530, which is engineered for sharp edges and low cutting forces. This results in reduced machining marks and less need for secondary finishing. For production environments seeking predictable dimensional results, the reduced cutting forces improve tool–workpiece stability and lower vibration risk, supporting longer tool life and a more efficient process. Secure compatibility and simple integration into existing tool systems Compatibility with toolholders is determined by form, relief angle, tolerance class, clamping arrangement, size and thickness; this insert matches ISO‑standard holders for CCMT geometry. The rhombic CCMT shape (size 09) with a 7° relief and 80° cutting angle ensures positive engagement in standard external and internal turning holders. The insert’s cylindrical hole with single‑side countersink (40°–60°) enables secure fastening and reliable repeatability when replacing tools, reducing setup time and minimising the risk of incorrect seating. Practical benefits for shopfloor efficiency and process reliability With a 0.2 mm nose radius and 3.97 mm thickness, the insert is optimised for small depths of cut and continuous finishing passes, making it suitable for precision components and tight tolerance work. The single‑sided chipbreaker promotes effective chip control for turning steels under finishing conditions, helping to avoid built‑up edge and maintain surface quality. Specifying this grade supports reproducible results across batches and improves overall throughput by reducing rejects and rework. For application advice or to secure Tungaloy CCMT09T302 NS9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss stock and suitability for the intended turning task Technical data Article number: 6951132 Manufacturer SKU: TUN6951132 SKU: 6951132-Tungaloy Designation: CCMT09T302 NS9530 Tungaloy turning insert Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Relief angle: 7° Cutting angle: 80° Special features Grade: NS9530 (uncoated cermet) Shape: Rhombic (CCMT) Chipbreaker: Single‑sided Hole style: Cylindrical hole + single‑side countersink (40°–60°) Material: Carbide Application: Turning, finishing steel FAQ What steel operations is this insert best suited for? The CCMT09T302 NS9530 Tungaloy turning insert is a finishing grade intended for steel turning with continuous cuts and small depths of cut, where a sharp edge and low cutting forces are required. How does the chipbreaker affect machining behaviour? A single‑sided chipbreaker on this insert controls chip flow during finishing passes, improving chip evacuation and helping to prevent built‑up edge when machining steel with the NS9530 cermet grade. Which holders are compatible with this insert form? Compatibility depends on holder form, relief angle and clamping. The rhombic CCMT form and the 7° relief are compatible with ISO‑standard CCMT external and internal turning holders; ensure the holder accepts size 09 and 3.97 mm thickness. Can this insert be used for interrupted cuts? The uncoated cermet NS9530 is optimised for continuous finishing cuts; for heavily interrupted cuts or roughing, consider a different grade tailored to impact resistance. Is regrinding recommended for this grade? Regrinding practices depend on the shop’s tooling strategy; the NS9530 finishing grade emphasises edge sharpness and surface quality, so regrinding should follow manufacturer guidance to preserve geometry and grade performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Achieve superior surface finish and reduced cutting forces with the CCMT09T302 NS9530 uncoated cermet insert, designed for continuous turning of steel components and fine finishing. Order directly via Metav Werkzeuge or contact our consultants for application support and setup advice. CCMT09T302 NS9530 — Turning insert for finishing, 0.2 mm radius, 7° clearance (Tungaloy) CCMT09T302 NS9530 is an ISO‑standard finishing insert in uncoated cermet, optimised for external and internal turning of steel where low cutting forces and high surface quality are required. Finishing grade for steel with sharp cutting edge Uncoated cermet for excellent surface finish 0.2 mm nose radius for fine detail turning 7° clearance and 80° rhombic geometry Consistent finishing results with low cutting effort The NS9530 grade is an uncoated cermet developed for finishing operations on steel, delivering a consistently sharp cutting edge and low cutting forces. This combination reduces the tendency for chatter during light passes and produces a tighter surface texture, which can shorten or eliminate downstream polishing. The material behaviour lends itself to continuous cutting, making the insert especially suited to stable set‑ups and short‑cycle precision parts where repeatable surface quality is a priority. Geometry that supports precision and repeatability A defined 0.2 mm nose radius and 7° clearance angle provide a balance between fine profile definition and edge strength. The rhombic 80° geometry offers versatility for both external and internal operations while the specified thickness (3.97 mm) and hole style (cylindrical hole with single‑side countersink 40°–60°) ensure secure clamping in standard ISO holders. These geometric choices translate into controlled tool engagement, predictable wear progression and reliable dimensional stability across batches. Practical application guidance for mills and job shops Select this finishing insert when aiming for high surface quality on turned steel components with small depths of cut. The NS9530 finishing grade performs best in continuous cuts and when combined with a suitable single‑sided chipbreaker selected to match workpiece material and machining stability. For mixed‑production environments, pairing the insert with a rigid holder and optimised feeds will maintain the sharp edge life and reduce the need for frequent regrinds or index changes. System compatibility and installation considerations Being an ISO‑standard turning insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Typical system build‑up includes the ISO insert, a matching external holder or boring bar, an underlay/shim and a clamp set with replacement screws. Confirm holder seating and screw torque to preserve repeatable clamping forces; correct mounting prevents micro‑movement and supports predictable chip formation and tool life. Contact Metav Werkzeuge for application advice and to secure Tungaloy CCMT09T302 NS9530 inserts for precision finishing — technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997712 Manufacturer SKU: TUN6997712 SKU: 6997712-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T302 NS9530 Tungaloy‑wendeplatte Shape: rhombic Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Included hole: with hole (cylindrical + single‑side countersink 40°–60°) Grade: NS9530 Cutting material type: uncoated cermet Application: turning Chipbreaker: single‑sided Facts Nose radius: 0.2 mm Thickness: 3.97 mm Effective angle: 80° Clearance: 7° Size code: 09 Manufacturer article number: 6997712 SKU: 6997712-Tungaloy Special features ISO‑standard turning insert Uncoated cermet finishing grade (NS9530) Sharp cutting edge for low cutting forces Single‑sided chipbreaker Rhombic 80° geometry Cylindrical hole with single‑side countersink (40°–60°) System requires matching holder, underlay and clamp set FAQ What materials is this insert recommended for? The CCMT09T302 NS9530 insert is recommended for turning steel, with the NS9530 grade optimised as a finishing sort for continuous cuts and small depths of cut. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm nose radius provides fine profile definition and contributes to an improved surface texture when the CCMT09T302 NS9530 is used in finishing passes under stable cutting conditions. Is this insert compatible with all ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT09T302 follows ISO standards and requires a matching holder and clamp set for secure mounting. What chip control does the single‑sided chipbreaker provide? The single‑sided chipbreaker is designed to assist in controlled chip formation during finishing operations, supporting continuous cutting and predictable edge behaviour with the NS9530 grade. Which cutting conditions suit this cermet grade best? NS9530 performs best in continuous cuts with small material removal and is intended for operations prioritising surface quality and low cutting forces rather than heavy interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and consistent edge stability for reliable batch production. The ISO rhombic insert combines a sharp cutting edge with an optimised chipbreaker to deliver superior surface quality on steel components. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and stock information. CCMT09T302 NS9530 CCMT turning insert (ISO 09T302) — Tungaloy The CCMT09T302 NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a low-cutting-force geometry and a fine nose radius for high-quality surface results. ISO rhombic CCMT shape, 80° cutting angle Uncoated cermet NS9530 for finishing 0.2 mm nose radius for excellent surface finish Cylindrical hole with single-side countersink Consistent fine finishing with low cutting forces This finishing-grade insert uses an uncoated cermet composition, specified as NS9530, to produce a sharp cutting edge that reduces cutting forces and improves workpiece finish. Cermet combines ceramic hardness with metallic toughness, resulting in an edge that maintains integrity under continuous cutting and small depth-of-cut conditions; this characteristic translates directly into reduced vibration and more predictable dimensional results. For shops seeking repeatable surface quality on steel components, the combination of a small 0.2 mm nose radius and the cermet chemistry ensures that part tolerances and visual appearance are both prioritised without resorting to aggressive feeds. Secure mounting and ISO compatibility for flexible tool systems The insert follows ISO standards for turning indexable inserts and is compatible with holders when matched for geometry, clearance and clamping specifications. The ISO rhombic CCMT geometry with an 80° cutting angle and 7° relief angle requires a matching external holder or boring bar; the plate is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure secure fastening. This standardised interface allows integration into existing toolholders and clamping kits, helping to reduce tooling setup time and inventory complexity. Clear documentation of form, free angle, tolerance class, fastening and thickness supports straightforward selection of the correct mounting components. Application range and system-level benefits for turning operations Intended for turning—both external and internal—this insert is a finishing grade optimised for steel and designed to perform best in continuous cuts and fine finishing cycles. It features a single-sided chipbreaker to manage chip flow consistently and minimise edge wear during low-depth passes. As part of a system consisting of the ISO insert, a compatible external holder or boring bar, an underlay/clamping set and spare screws, the plate simplifies maintenance and replacement routines. Where high surface quality and low cutting forces matter most—such as shaft finishing or precision turned components—the plate delivers predictable outcomes while supporting efficient production workflows. For precise finishing with the Tungaloy NS9530 insert, contact Metav Werkzeuge for stock confirmation and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951117 Manufacturer SKU: TUN6951117 Model series: ISO turning indexable inserts Label: CCMT09T302 NS9530 Tungaloy-insert Facts Insert size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Cutting angle: 80° Relief angle: 7° SKU: 6951117-Tungaloy Special features Uncoated cermet grade NS9530 Carbide substrate Rhombic CCMT geometry Single-sided chipbreaker Mounting: cylindrical hole + single-side countersink (40°–60°) Application: turning (external & internal) System components: insert, matching holder/boring bar, shim/clamp set, spare screws Best for continuous cuts and small depths of cut FAQ Is this insert suitable for finishing steel components? Yes. The CCMT09T302 NS9530 is a finishing-grade, uncoated cermet insert optimised for steel and designed to deliver low cutting forces and a high surface finish. Which holders are compatible with this ISO geometry? Compatibility depends on matching the CCMT geometry, the 80° cutting angle, the 7° relief angle and the plate thickness; use holders specified for ISO rhombic CCMT inserts with a cylindrical hole and countersink to secure the insert. Can the insert be used for internal turning? Yes. The insert is specified for both external and internal turning when mounted in an appropriate boring bar that accepts CCMT-format inserts. How does the single-sided chipbreaker affect performance? The single-sided chipbreaker is designed to control chip flow during finishing passes, promoting consistent chip evacuation and helping to maintain the sharp edge required for fine surface quality. What system components are recommended when ordering replacements? Order the insert together with a compatible external holder or boring bar, an underlay/clamping set and spare screws to ensure correct mounting and immediate replacement when required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of a high‑quality finishing solution with the sharp NS9530 cermet grade, consistent ISO compatibility and a secure mounting design for predictable machining results. Order the insert directly via Metav Werkzeuge or consult their team for application advice. CCMT 09T302 NS9530 Tungaloy indexable insert for turning The CCMT09T302 NS9530 Tungaloy insert is an ISO‑standard rhombic indexable turning insert engineered for finishing operations on steel, offering a sharp cutting edge and low cutting forces for superior surface quality. Finishing cermet grade NS9530 Sharp edge for high surface finish Rhombic CCMT shape, 80° approach angle Single-sided chipbreaker, 0.2 mm nose radius Superior surface quality for finishing cuts The uncoated cermet composition NS9530 delivers a distinctly sharp cutting edge and reduced adhesion tendency during continuous cutting, which leads to lower cutting forces and a finer surface finish on steel components. Cermet combines ceramic hardness with metallic toughness, so it sustains edge sharpness at the light depths of cut typical for finishing. Choosing this grade helps achieve consistent dimensional accuracy and an improved visual finish with fewer follow‑up processes. Predictable fit and secure clamping for reliable cycles Designed to the ISO designation CCMT09T302, the insert follows standard geometry and attachment features so compatibility with suitable holders is predictable. Key mechanical parameters — including the 7° clearance, 80° approach angle and cylindrical hole with single‑side countersink (40°–60°) — ensure secure seating and repeatable clamping. Stable mounting reduces vibration and supports consistent cutting performance, enabling steady tool life and minimised downtime in batch production or serial turning. Application guidance for efficient turning This insert is optimised for external and internal turning where continuous cuts and small feed/depth settings are used. The single‑sided chipbreaker guides chips reliably for finishing passes, while the 0.2 mm nose radius balances fine detail with profile strength. The substrate is carbide, providing the toughness needed to support the cermet cutting layer. For best results, pair the insert with a holder matched for form, tolerance class and thickness to exploit the grade’s low cutting forces and secure edge integrity. Contact Metav Werkzeuge for tailored machining recommendations on Tungaloy finishing inserts and to verify stock and delivery for the CCMT09T302 NS9530 item Technical Data Article number: 6998440 Manufacturer SKU: TUN6998440 Label: CCMT09T302 NS9530 Tungaloy-Wendeplatte Manufacturer: Tungaloy Facts ISO designation: CCMT09T302 Insert size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Approach angle: 80° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Substrate material: carbide Shape: rhombic Chipbreaker: single-sided Application: turning; finishing of steel; continuous cuts and small depths of cut FAQ What materials is this insert best suited for? The CCMT09T302 NS9530 insert is optimised for finishing operations on steel; its uncoated cermet composition is selected for low cutting forces and a superior surface finish when turning steel. Is the insert compatible with ISO holders? Yes — the insert uses the ISO geometry CCMT09T302; compatibility depends on matching holder form, clearance angle, tolerance class, fastening and thickness. How does the NS9530 grade differ from coated carbide grades? NS9530 is an uncoated cermet grade that maintains a sharper edge and produces finer finishes in finishing cuts, while coated carbide grades typically offer greater wear resistance for heavy or interrupted cuts. Which chip control features are included? The insert incorporates a single‑sided chipbreaker, designed to control chips effectively during continuous finishing passes. What nose radius and approach angle should be expected? This insert has a 0.2 mm nose radius and an 80° approach angle, balancing fine detail capability with robust edge support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Combine precise finishing performance, consistently low cutting forces and ISO compatibility for productive turning operations; order the CCMT09T302 directly via Metav Werkzeuge or consult our specialists for application advice. CCMT09T302 NS9530 Tungaloy ISO turning insert — finishing grade, sharp edge CCMT09T302 NS9530 is an ISO‑standard rhombic insert designed for external and internal turning, offering a sharp cutting edge and low cutting forces for high‑quality surface finishes. CCMT09T302 turning insert by Tungaloy Uncoated cermet NS9530 finishing grade 0.2 mm corner radius for high surface finish Cylindrical hole + 40°–60° countersink Delivering repeatable fine finishes with low cutting effort The uncoated cermet grade NS9530 is formulated as a dedicated finishing grade for steel, providing a sharp cutting edge and low cutting forces that reduce heat and minimise workpiece distortion. This results in consistently improved surface quality on turned components and fewer secondary operations. As an ISO component, the insert supports standardised clamping routines and predictable process behaviour, which helps stabilise cycle times and reduces scrap rates. Secure fit and straightforward mounting for production reliability Compatibility with toolholders is defined by form, relief angle, tolerance class, fastening method, size and thickness. The insert’s rhombic shape, 3.97 mm thickness and cylindrical hole with a single‑side countersink (40°–60°) ensure secure locating and repeatable seating in most ISO‑compliant external holders and boring bars. This mechanical reliability reduces index‑up time and makes tool changes predictable in a high‑mix workshop environment. Small corner radius for controlled finishing passes With a 0.2 mm corner radius, the insert supports fine finishing passes that preserve geometric accuracy while enhancing visual and tactile surface quality. The small radius helps to avoid chatter in light‑cutting conditions and, combined with the sharp cermet edge, enables low feed, high‑quality cuts on continuous turning operations. Engineers seeking tight tolerances will find this geometry especially useful for specification‑driven production. Process advantages and application scope Designed primarily for turning, the insert serves both external and internal operations where a finishing cut is required. The 80° included angle and 7° relief angle contribute to stable cutting forces and consistent chip flow when paired with an appropriate single‑sided chipbreaker. The result is reduced tool‑wear variability and more predictable insert life, which benefits planning for regrind or replacement intervals and supports lean manufacturing goals. Material suitability and handling recommendations The grade is optimised for steel work, particularly in continuous cutting and small depths of cut; it is not coated, which enhances edge sharpness for finishing tasks. Select a matching single‑sided chipbreaker and an ISO‑standard holder that accommodates the insert’s form and dimensions to fully exploit the NS9530 characteristics. For best results, use appropriate cutting data for finishing: reduced feeds, moderate spindle speeds and steady coolant or air blow to maintain chip control and surface integrity. Contact Metav Werkzeuge for technical consultation on Tungaloy finishing inserts or to reserve stock of the CCMT09T302; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998426 Manufacturer SKU: TUN6998426 Model series: ISO‑Drehwendeschneidplatten Product name: CCMT09T302 NS9530 Tungaloy‑Wendeplatte Data Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle (frewinkel): 7° Included angle: 80° Hole: with hole — cylindrical hole + single‑side countersink (40°–60°) Special features Rhombic plate form Uncoated cermet, grade NS9530 Finishing grade for steel with sharp cutting edge Single‑sided chipbreaker Compatible with ISO turning holders Application: turning (external and internal) FAQ What applications suit this insert best? The CCMT09T302 NS9530 insert is intended for finishing in external and internal turning operations, particularly on steel where a sharp uncoated cermet edge and low cutting forces are required. Is the insert compatible with standard ISO holders? Yes. Compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness; the insert follows ISO geometry and is suitable for ISO‑compliant external holders and boring bars. What material is the insert made from and which workpieces are recommended? The insert is made of cemented carbide cermet (uncoated) in grade NS9530, optimised for steel finishing cuts and continuous turning with small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of NS9530 cermet for excellent surface finish, a precise 0.2 mm corner radius for fine details, and ISO compatibility for reliable insertion into standard holders — order directly via Metav Werkzeuge or consult the technical team for application-specific advice. CCMT09T302 NS9530 indexable turning insert — ISO finishing insert for turning, by Tungaloy The CCMT09T302 NS9530 is an ISO‑standard indexable turning insert engineered for finishing operations on steel, offering a sharp cutting edge and low cutting forces for consistent surface quality. Uncoated cermet grade NS9530 for finishing 0.2 mm corner radius for fine detail ISO‑compatibility with standard holders Single‑sided chipbreaker for continuous cuts Consistent finishing performance with low cutting forces The uncoated cermet composition NS9530 is tailored for finishing passes on steel, delivering a high-quality surface finish while keeping cutting forces low. Cermet combines ceramic hardness with metal toughness, which reduces built-up edge and improves dimensional stability during continuous cuts. This makes the insert particularly suitable for applications with small depths of cut where surface integrity and tight tolerances are critical. The result is fewer secondary operations and predictable part quality. Secure fit and geometry that supports precision turning Designed to the ISO plate specification, the insert’s rhombic shape and 80° lead angle provide a stable seating in compatible holders. The plate includes a cylindrical hole with a single‑side countersink (40°–60°) to ensure correct clamping and repeatable positioning. The 3.97 mm thickness and tolerance‑compliant form aid in vibration dampening during external and internal turning, contributing to consistent chip flow and tool life across production batches. Optimised chip control for continuous cutting conditions The single‑sided chipbreaker is matched to the cermet grade and intended for continuous cutting modes, promoting predictable chip evacuation and minimising interruption during long runs. For finishing operations where minimal material removal and smooth chips are desirable, this chipformer reduces the risk of surface damage and eases downstream handling. Where intermittent cuts are expected, selecting an appropriate holder and cutting parameters will maintain the integrity provided by this insert design. Practical benefits and process considerations for production workflows Integrating this ISO‑format insert into a machining cell supports quick index changes and straightforward inventory handling. The 0.2 mm corner radius balances edge strength with the ability to produce sharp external contours, while the sharp cutting edge of the cermet grade reduces rubbing and work hardening on steel surfaces. For process planning, match feed rates and spindle speeds to the finishing nature of the grade and verify clamping rigidity to fully exploit the insert’s capabilities. Contact Metav Werkzeuge for tailored machining advice or to secure stock of the Tungaloy CCMT09T302 NS9530 finishing insert and complementary holders Technical data Article number: 6998421 SKU: 6998421-Tungaloy Manufacturer SKU: TUN6998421 Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: CCMT09T302 Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Lead angle: 80° Rake/free angle: 7° Special features Cutting material type: uncoated cermet (NS9530) Substrate material: Hartmetall Plate form: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided FAQ What material applications is this insert optimised for? The CCMT09T302 NS9530 is optimised for finishing operations on steel; the NS9530 cermet excels in continuous cuts where surface finish and low cutting forces are priorities. Can the insert be used in standard ISO external turning holders? Yes, the insert conforms to ISO plate geometry and is compatible with holders that match the form, clearance angle, tolerance class, fastening method, size and thickness. How does the 0.2 mm corner radius affect component finish? A 0.2 mm corner radius offers a balance between edge strength and the ability to machine fine details, improving surface integrity while avoiding excessive edge chipping. Is the NS9530 grade coated or uncoated? The NS9530 grade supplied for this CCMT09T302 is an uncoated cermet, optimised for sharp cutting edges and superior surface quality during finishing. What clamping features ensure repeatable positioning of the insert? The insert includes a cylindrical hole with a single‑side countersink (40°–60°), enabling secure clamping and repeatable seating when used with appropriate underplates and screws. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant CVD‑coated carbide grade and a precise 0.2 mm nose radius for consistent surface quality and extended tool life; the ISO rhombic form and cylindrical hole with a one‑sided countersink ensure reliable clamping and quick replacement in standard holders. Order directly via Metav Werkzeuge or request tailored advice for machining strategies. CCMT09T302 CCMT 09T302 T6215 Turning insert by Tungaloy CCMT09T302 – a rhombic ISO turning insert designed for stable to lightly interrupted turning of stainless steels in external and internal operations ISO rhombic insert, 09 size CVD-coated carbide (T6215) for wear resistance 0.2 mm nose radius for fine turning Cylindrical hole with one-sided countersink Consistent cutting performance for stainless steels The CVD‑coated cemented carbide grade T6215 combines wear resistance with predictable edge behaviour, making this indexable insert suitable for turning stainless steels under stable or mildly interrupted conditions. The moderately sharp 0.2 mm nose radius helps deliver good surface finish on facing and light profiling operations while keeping cutting forces manageable. The coating supports longer tool life by reducing flank wear and improving thermal resistance compared with uncoated grades. Secure mounting and simple tool‑room setup The insert follows the ISO rhombic format in size 09 with an 80° included angle and a 3.97 mm thickness, intended for common external holders and boring bars that accept this form factor. The centre hole is cylindrical and features a one‑sided countersink (40°–60°), which provides firm axial location with standard clamping screws and seating components. Compatibility depends on holder geometry, relief angle and tolerance class; using the correct clamping kit and a matching seat ensures repeatable indexability and stable cutting. Practical guidance for selection and economy Select a chipbreaker and the T6215 grade according to material, cutting conditions and machine stability: the single‑sided chipbreaker suits general turning where controlled chip flow is required. For finishing cuts keep feeds and depths moderate to exploit the fine nose radius; for higher metal removal rates a larger nose radius or a different chipformer may be preferable. The combination of CVD coating and a wear‑resistant carbide substrate supports reduced tool change frequency and predictable performance, contributing to overall process efficiency and lower cycle costs. Contact Metav Werkzeuge for personalised recommendations on using Tungaloy CCMT09T302 inserts and assistance with holder compatibility Technical data Article number: 6951114-Tungaloy Manufacturer SKU: TUN6951114 Manufacturer article number: 6951114 Model series: ISO turning indexable inserts Material: cemented carbide Numeric data Size: 09 Thickness: 3.97 mm Included angle: 80° Nose radius: 0.2 mm Relief angle: 7° Hole style: with hole Special features Grade: T6215 Coating: CVD Shape: rhombic Chipbreaker: single-sided Hole detail: cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The CCMT09T302 in grade T6215 is formulated for machining stainless steels, offering wear resistance under stable to lightly interrupted turning conditions. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm nose radius helps produce finer surface finishes on finishing passes; the CCMT09T302 provides good balance between detail and edge strength for light profiling. Can the insert be used in standard ISO holders? The rhombic ISO form and the cylindrical hole with countersink are designed for compatibility with standard holders that accept CCMT‑format inserts; ensure the holder matches the 09 size and seating geometry. What is the benefit of the CVD coating on this grade? The CVD coating on the T6215 grade increases thermal and abrasive wear resistance, extending tool life and stabilising cutting performance in demanding stainless steel operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, precise 80° rhombic geometry and a 0.2 mm corner radius for efficient, repeatable turning of stainless steel. The insert’s ISO form and single-sided chipbreaker ensure stable cutting and long tool life; order directly via Metav Werkzeuge or contact their consultants for application support. CCMT 09T302 T6215 turning insert — CVD-coated carbide, 80° rhombic (Tungaloy) CCMT 09T302 T6215 is an ISO-format indexable insert designed for external and internal turning, optimised for stainless steel in stable to lightly interrupted cutting conditions. CVD-coated carbide for stainless steel machining Rhombic 80° geometry for versatile turning 0.2 mm corner radius for controlled finishing Single-sided chipbreaker with countersunk hole Increased productivity and extended tool life in stainless steel turning The combination of a CVD coating and a wear-resistant carbide substrate delivers consistent performance when machining stainless steel. The coating reduces flank wear and improves heat resistance, which prolongs cutting edge life and lowers tool-change frequency. As a result, cycle times are reduced and machine availability increases. For customers running medium-volume production, this means less downtime and a more predictable tool consumption pattern—direct benefits for production planning and cost control. Geometry that stabilises cuts and improves surface finish The 80° rhombic geometry with a 0.2 mm corner radius provides a balance between strength and finishing capability. The acute geometry allows controlled chip formation and accessibility in shoulder and profile turning, while the small corner radius supports fine surface quality without sacrificing edge robustness. This geometry is especially suitable where dimensional consistency and surface integrity are required, reducing rework and downstream polishing operations. Reliable chip control and mounting features for consistent results A single-sided chipbreaker combined with the insert’s cylindrical hole and one-sided countersink (40°–60°) supports predictable chip flow and secure clamping in ISO holders. The standardised ISO form simplifies replacement and inventory management, allowing the insert to be indexed or rotated as permitted by the holder design. Stable clamping and repeatable seating contribute to process reliability and reduce the need for frequent adjustments during batch runs. Practical suitability and recommended use cases Designed for turning operations, the insert’s grade T6215 and CVD treatment are tailored for operations on stainless steel under steady to lightly interrupted cutting. Typical applications include external profiling, internal boring and finishing passes where a combination of wear resistance and surface quality is required. Selection of appropriate speeds, feeds and a compatible holder will enable the best compromise between tool life and productivity. For tailored machining advice or to procure the Tungaloy CCMT 09T302 T6215 insert for professional turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific recommendations and fast supply. Technical data Article number: 6951129 Manufacturer SKU: TUN6951129 SKU: 6951129-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions Insert size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Features & compatibility Material: Hartmetall Coating/grade: T6215 (CVD) Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Drehen FAQ Which materials is this insert best suited for? This insert is optimised for machining stainless steel; the T6215 grade and CVD coating provide enhanced wear resistance when turning these alloys. How does the T6215 grade perform on stainless steel? The T6215 CVD-coated carbide grade in the CCMT 09T302 insert offers improved heat and wear resistance, extending tool life and maintaining cutting-edge integrity on stainless steel. What is the corner radius and how does it affect finish? The CCMT 09T302 insert has a 0.2 mm corner radius, which supports fine surface quality while retaining sufficient edge strength for light to moderate finishing passes. Is the insert compatible with standard ISO external holders? The CCMT 09T302 follows ISO dimensions; compatibility depends on holder form, clearance angle and screw/tolerance class, enabling use in standard ISO external holders and boring bars. What chip control features are provided? The single-sided chipbreaker and the insert’s hole with one-sided countersink ensure predictable chip formation and secure clamping for consistent machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide wear resistance and a 0.2 mm corner radius for reliable stainless steel turning; order genuine items directly via Metav Werkzeuge or consult our specialists for holder compatibility. CCMT 09T302 T6215 – CCMT indexable insert for turning (Tungaloy) CCMT09T302 T6215 is an ISO-format indexable insert for precision turning, engineered for stable to lightly interrupted machining of stainless steel. CVD-coated carbide for wear resistance Designed for turning stainless steels ISO CCMT shape for broad holder compatibility One-sided chipbreaker for controlled chips Durable performance for stainless steel turning The insert combines a CVD-coated carbide grade (T6215) with a compact 0.2 mm corner radius, delivering consistent edge life when machining stainless steel under stable conditions. The carbide substrate and coating reduce flank and crater wear, which translates into longer tool life and fewer insert changes. As a result, production runs benefit from improved uptime and reduced tooling interventions, supporting efficient workshop schedules and predictable maintenance cycles. Reliable clamping and ISO compatibility Built in the ISO CCMT form, the insert matches common external holders and boring bars when the form, clearance angle, tolerance class, clamping method, size and thickness correspond. The rhombic profile and standardised dimensions simplify tool inventory and replacement procedures. The geometry—including an 80° included angle and a 7° clearance angle—ensures stable seating and repeatable positioning, which aids in maintaining consistent part tolerances across batches. Coating and grade advantages explained The T6215 grade is a CVD-coated carbide designed specifically for improved wear resistance in turning applications on stainless steels. CVD coatings provide a hard outer layer that resists abrasive wear while maintaining a tough substrate beneath to avoid premature chipping. This balance is particularly beneficial when machining tougher, work-hardening alloys common in food, medical and chemical industry components, where surface integrity and dimensional accuracy are priorities. Practical guidance and recommended use The insert features a one-sided chipbreaker to promote controlled chip formation and evacuation during turning, reducing the risk of built-up edge and improving surface finish. A hole with a cylindrical bore and a single-sided countersink (40°–60°) enables secure fastening and accurate seating in compatible toolholders. For optimal results, match the chipbreaker and grade to the workpiece condition and ensure stable clamping to prevent vibration; choosing the correct holder and clamping hardware will maximise the benefits of the insert’s design. For genuine Tungaloy performance and technical advice on the CCMT09T302 T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and procurement options. Technical data Article number: 6876220 Manufacturer SKU: TUN6876220 Label: CCMT09T302 T6215 Tungaloy-Wendeplatte Model series: ISO turning indexable inserts Material: carbide Facts Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 80° Size: 09 Manufacturer article number: 6876220 Special features CVD-coated carbide (T6215) Suitable for turning stainless steel (stable to slightly interrupted) One-sided chipbreaker ISO designation: CCMT09T302 Rhombic insert shape With hole; cylindrical hole + single-sided countersink (40°–60°) Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The CCMT09T302 T6215 insert is intended chiefly for turning stainless steel, with the T6215 grade offering wear resistance suited to stable and lightly interrupted cuts. How is the insert secured in the holder? The insert features a hole with a cylindrical bore and a single-sided countersink (40°–60°), enabling secure clamping when combined with the appropriate screw, seat and top clamp in compatible CCMT holders. What does the T6215 grade mean for wear and tool life? T6215 designates a CVD-coated carbide grade optimised for wear resistance; this helps extend service intervals and supports consistent surface quality during stainless steel turning. Is the insert compatible with all CCMT holders? Compatibility depends on matching the insert form, 7° clearance angle, tolerance class, clamping mechanism, size (09) and thickness (3.97 mm) to the holder specifications. Which chip control can be expected? The one-sided chipbreaker promotes controlled chip formation and evacuation during turning, improving surface finish and reducing the risk of built-up edge under recommended conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T9215, precise ISO CCMT geometry and secure clamping for dependable, high‑productivity turning. The grade's wear resistance and fracture toughness support continuous to light interrupted cuts while the defined rhombic form and 7° relief ensure repeatable results. Order directly via Metav Werkzeuge or consult the technical advisors for selection support. CCMT 09T302 T9215 — Tungaloy turning indexable insert, CVD‑coated carbide A CCMT 09T302 T9215 indexable turning insert designed for medium steel machining with a single‑sided chipbreaker and rhombic CCMT geometry CVD-coated carbide grade T9215 Rhombic CCMT form with 80° included angle 0.2 mm corner radius for fine profiling Single-sided chipbreaker for reliable chips Consistent productivity for medium‑steel turning The T9215 grade is a CVD‑coated carbide developed as a first choice for medium steel machining; it combines enhanced wear resistance with good fracture toughness, which translates into longer tool life and fewer unplanned tool changes. For production runs where stability and uptime matter, this insert delivers a measurable improvement in process economy: higher cutting lengths per edge and consistent workpiece quality. Its suitability for continuous to light interrupted cuts means the grade balances abrasive wear protection with the toughness needed for slight interruptions in the cut. Defined geometry and secure clamping for repeatable results The insert follows the ISO CCMT form and the rhombic 09 size, giving a clear upgrade path for standard CCMT holders. The geometry includes an 80° included angle, a 7° relief angle and a thickness of 3.97 mm, all critical parameters that determine fit and rigidity in the toolholder. The version supplied with a cylindrical hole and one‑sided countersink (40°–60°) ensures precise seating and reliable clamp engagement. These design choices reduce vibration, improve surface finish, and make process outcomes more repeatable across batches. Improved chip control and practical system integration Chip control is handled by a single‑sided chipbreaker, which, together with a 0.2 mm corner radius, supports fine profiling and controlled chip formation for medium‑finish operations. The insert functions as part of a system: the indexable insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws must be matched to achieve optimal results. Selection of the chipbreaker and cutting parameters should be aligned with workpiece material, machining stability and the intended productivity level; correct matching reduces cycle times and delivers predictable component quality. For complex applications, Metav Werkzeuge can provide technical guidance on holder selection and process setup. Discuss the Tungaloy CCMT 09T302 T9215 insert and suitable holders with Metav Werkzeuge today—quote SKU TUN6951127 to request tailored application advice and fast processing Technical Data Article number: 6951127 Manufacturer SKU: TUN6951127 Label: CCMT09T302 T9215 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core data Size: 09 Thickness: 3.97 mm Shape: Rhombic, CCMT form Included angle: 80° Clearance (relief) angle: 7° Corner radius: 0.2 mm Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Grade: T9215 Material: CVD‑coated carbide Special features Single‑sided chipbreaker Suitable for medium steel turning For continuous to light interrupted cuts Compatibility determined by form, clearance, tolerance, attachment, size and thickness System components: indexable insert, compatible holder/boring bar, shim/clamp set and spare screws FAQ Is this insert suitable for internal turning operations? Yes. The CCMT 09T302 T9215 indexable insert is suitable for both external and internal turning when paired with the appropriate holder and setup, providing the same grade benefits in medium steel applications. Which materials are recommended for this grade? The T9215 grade is optimised for medium steel; it offers a balance of wear resistance and toughness for continuous to light interrupted machining of steel components. How does the hole and countersink design affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) produces a defined seating surface that improves clamp stability and repeatability, reducing the risk of insert movement under cutting loads. When should a 0.2 mm corner radius be selected? A 0.2 mm corner radius is recommended for fine profiling and finishing passes where dimension control and surface quality are priorities; larger radii may be chosen for roughing to increase edge strength. What should be checked to ensure holder compatibility? Compatibility is governed by the insert form, clearance angle, tolerance class, attachment method, size and thickness; verifying these parameters against the holder specification ensures correct fit and machining stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 T9215 Wendeplatten - Tungaloy
Benefit from the combination of durable CVD-coated carbide and a compact, ISO‑compliant form for consistent turning results; ideal for productive mid‑steel operations. Order the CCMT09T302 T9215 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 T9215 turning insert — Tungaloy, rhombic ISO turning insert CCMT09T302 T9215 is an ISO‑style indexable turning insert for general turning applications, engineered for productive mid‑steel machining. ISO‑standard CCMT insert, rhombic shape CVD-coated carbide grade T9215 for mid‑steel Single‑sided chipbreaker, 0.2 mm corner radius Greater productivity through wear‑resistant grade and coating The T9215 grade combines a CVD-coated carbide substrate with a balance of wear resistance and fracture toughness, designed specifically for the demands of medium‑strength steel machining. This configuration extends tool life under continuous and lightly interrupted cuts, reducing downtime for insert changes and contributing to steadier cycle times. The overall effect is improved process efficiency and lower unit machining costs, especially in series production where repeatability and predictable tool life are decisive. Clear compatibility with ISO toolholders for reliable clamping Built to ISO specifications, the insert fits into standard holders when form, clearance angle, tolerance class, fastening type, size and thickness match. The designation indicates a rhombic geometry and a universal mounting style with a central hole and one‑sided countersink, so the clamping interface is secure and repeatable. Choosing a matched holder and the correct tolerance class ensures stable seating and minimises vibration, which in turn improves surface finish and tool life. When selecting a holder, pay attention to the insert’s thickness and hole style to guarantee correct seat contact. Geometry tuned for stable cuts and fine surface finish With a nominal corner radius of 0.2 mm, an 80° principal cutting angle and a 7° relief, the insert is suited to finishing and light‑to‑medium turning where dimensional control and surface quality matter. The single‑sided chipbreaker supports consistent chip formation in mid‑steel and eases chip evacuation in standard turning operations. The plate thickness of 3.97 mm and the centred hole with a cylindrical bore plus one‑sided countersink (40°–60°) enable secure clamping and straightforward indexing. For best results, pair the insert with a stable, vibration‑damped toolholder and select feeds and speeds that match the small corner radius to avoid rubbing and to maintain edge integrity. For reliable mid‑steel turning with proven performance, source genuine Tungaloy CCMT 09T302 T9215 inserts from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data Article number: 6772426 Manufacturer SKU: TUN6772426 SKU: 6772426-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade/coating: T9215, CVD‑coated carbide Designation: CCMT09T302 Facts Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Approach angle: 80° Size: 09 Special features Rhombic plate form Central hole with cylindrical bore and one‑sided countersink (40°–60°) Single‑sided chipbreaker Intended application: turning ISO‑compliant geometry for standard holders FAQ Is this insert suitable for turning medium‑strength steels? Yes. The CCMT09T302 in T9215 grade is formulated for mid‑steel machining and offers a balance of wear resistance and toughness suitable for continuous and lightly interrupted cuts. What holder features are required for correct compatibility? Compatibility depends on the holder’s form, clearance/freiwinkel, tolerance class, fastening method, size and plate thickness; the CCMT09T302 requires a holder matching its rhombic form and central hole with countersink. How does the 0.2 mm corner radius affect cutting performance? A 0.2 mm corner radius favours finishing and accurate dimension control; it reduces cutting forces compared with larger radii but requires appropriate feed rates to avoid premature edge wear. Can the insert be used for interrupted cuts? The T9215 grade provides fracture resistance that accommodates light interruptions; for heavy interruptions, consider grades or geometries specifically designed for highly interrupted conditions. How is chip control managed with this insert? Chip control is provided by the single‑sided chipbreaker; selecting the correct chipbreaker and machining parameters for the workpiece material improves evacuation and reduces re‑cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide grade T9215 and a 0.2 mm nose radius for consistent, productive turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 T9215 indexable turning insert by Tungaloy — 0.2 mm radius, 7° clearance The CCMT09T302 T9215 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a balance of wear resistance and toughness for medium‑grade steel machining. CVD-coated carbide grade T9215 for medium steel 0.2 mm nose radius for precise profile control 7° clearance angle for stable cutting Cylindrical hole with 40°–60° single-sided countersink Increase throughput with a wear‑resistant cutting grade The combination of a CVD‑coated carbide substrate and the T9215 grade gives the insert a high level of wear resistance while maintaining fracture toughness. This translates into longer tool life in continuous operations and fewer indexings, which reduces machine downtime and improves overall productivity. The coating's role is to limit flank wear and protect the carbide substrate at elevated temperatures, enabling stable machining of medium steels without compromising edge integrity. Achieve tighter geometry control and surface quality A 0.2 mm nose radius on a rhombic insert delivers a finer profile on turned parts and helps meet tighter dimensional and surface‑finish requirements. The modest radius reduces the tendency to generate chatter compared with larger radii on unstable setups, while still providing a cutting edge robust enough for standard finishing and semi‑finishing passes. The result is consistent component geometry and reliable surface appearance across production batches. Secure seating and predictable tool orientation The insert is ISO‑compliant in form and size, ensuring compatibility with ISO turning holders when matched for form, clearance, tolerance class, fastening and thickness. The cylindrical hole with a 40°–60° single‑sided countersink provides reproducible seating and secure clamping, which helps maintain the intended 7° clearance angle and correct rake relationship during cutting. That stability reduces unexpected variations and supports repeatable cycle times. Versatile chip control and application scope Equipped with a single-sided chipbreaker, this indexable insert is optimised for medium steel machining and performs well in continuous to light interrupted cuts. The chipbreaker geometry aids chip fragmentation and evacuation, which lowers the risk of chip entanglement and improves process reliability. For shops seeking a productive balance between wear resistance and toughness, this insert is suitable for standard turning tasks where consistent throughput matters. For high-productivity turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for procurement or technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951110 Manufacturer SKU: TUN6951110 Material: carbide Shape: rhombic Size: 09 Thickness: 3.97 mm Hole: cylindrical hole + single-sided countersink (40°–60°) Facts Grade/coating: T9215 (CVD-coated carbide) Nose radius: 0.2 mm Clearance angle: 7° Designation: CCMT09T302 Application: Turning Compatible with ISO turning holders Special features Single-sided chipbreaker For medium steel machining Suitable for continuous to light interrupted cuts Rhombic insert geometry 80° included angle FAQ What materials is this insert suitable for? The CCMT09T302 T9215 insert is formulated for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and toughness for productive steel turning. How is compatibility with a toolholder determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the CCMT09T302 is ISO‑standard, so matching holders with the same ISO form and seating ensure correct fit. What does the cylindrical hole with countersink provide? The cylindrical hole with a 40°–60° single‑sided countersink on the CCMT09T302 ensures reproducible seating and secure clamping, maintaining tool orientation and repeatable cutting geometry. Is the insert suitable for interrupted cuts? Yes; the T9215 grade and the insert geometry are suitable for continuous to light interrupted cuts, offering a compromise between wear resistance and fracture toughness for reliable performance. Which features improve surface finish and dimensional control? The 0.2 mm nose radius and the rhombic geometry contribute to finer profile control and a consistent surface finish during turning operations with the CCMT09T302. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9225 Wendeplatten - Tungaloy
Benefit from the combination of the robust T9225 CVD-coated carbide grade, the reliable rhombic CCMT geometry and precise 7° clearance for consistent medium to heavy steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. CCMT 09T302 T9225 Turning Insert — rhombic CCMT, 7° clearance — Tungaloy CCMT09T302 T9225 is an indexable turning insert designed for external and internal turning in medium to heavy-duty steel applications. CVD-coated carbide universal grade T9225 Rhombic CCMT form with 7° clearance Suitable for medium to heavy steel turning Cylindrical hole with single-side countersink (40°–60°) Productivity through a robust universal grade The CCMT09T302 insert is based on the T9225 grade, a CVD-coated carbide engineered for a balance of toughness and wear resistance. This combination enables more stable chip formation under varying engagement conditions and improved life in medium to heavy steel machining. The engineered grade reduces the need for frequent tool changes, helping to maintain a continuous production flow and lower overall machining costs. Precise geometry for stable, repeatable turning The rhombic CCMT geometry with an 80° included angle and 7° clearance provides a reliable cutting edge for both external and internal turning operations. The insert’s cylindrical hole with a one-sided countersink ensures secure clamping and repeatable seating in compatible holders, minimising runout and vibration. Together these features deliver more consistent surface finish and dimensional accuracy across batches. Simple integration and predictable performance Designed as an ISO-format indexable insert, the component is intended for use in a system comprising insert, appropriate outer holder or boring bar, and supporting shim/clamp sets plus replacement screws. The single-sided chipbreaker suits a range of cutting parameters; selecting the correct chipbreaker and machining stability will exploit the grade’s toughness for interrupted cuts or varying engagement. The ISO conformity eases tool inventory management and speeds up requalification of holders. Contact Metav Werkzeuge for tailored application advice and availability of Tungaloy indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781147 SKU: 6781147-Tungaloy Manufacturer SKU: TUN6781147 Facts Insert size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 80° Special features CVD-coated carbide, grade T9225 Rhombic form CCMT09T302 Cylindrical hole + single-side countersink (40°–60°) Single-sided chipbreaker ISO turning indexable insert Application: external and internal turning FAQ What materials is this insert intended for? The CCMT09T302 T9225 insert from Tungaloy is a universal grade optimised for medium to heavy steel turning and performs well where changing engagement or slight interruptions require additional toughness. How is the insert secured in the holder? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the CCMT09T302 seats in ISO-compatible holders and is clamped via the cylindrical hole with countersink for secure positioning. What performance benefits does the CVD coating provide? The CVD-coated layer on the grade T9225 increases wear resistance and thermal stability, extending tool life and maintaining cutting-edge integrity in demanding steel applications. Is the geometry suitable for interrupted cuts or variable engagement? Yes, the toughness of the T9225 grade combined with the rhombic geometry and single-sided chipbreaker makes the insert tolerant of variable cutting conditions and short interruptions. Which components complete the system for reliable use? A complete system typically includes the indexable insert, a matching outer holder or boring bar, a shim/clamp set and replacement screws to ensure repeatable clamping and quick index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with a 0.2 mm corner radius and ISO-compliant geometry delivers robust performance for medium to heavy steel turning; order the CCMT09T302 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T302 T9225 — ISO turning insert (rhomboid, 0.2 mm radius) | Tungaloy The CCMT09T302 T9225 is an ISO rhombic turning insert designed for medium to heavy steel turning, featuring a CVD-coated carbide grade and a single-sided chipbreaker for stable, reliable cutting. CVD-coated universal grade T9225 ISO rhombic insert CCMT 09 format 0.2 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Reliable performance for medium to heavy turning operations The combination of a CVD-coated surface and a tough carbide substrate provides a balance of wear resistance and fracture toughness that suits interrupted or variable cutting conditions. The T9225 grade is formulated to maintain edge integrity under heavier engagement, reducing the frequency of insert changes and improving process uptime. By using an ISO-standardised geometry, the component ensures repeatable cutting behaviour, making machining parameters more predictable and the process more cost-effective. Geometry that controls chips and improves cycle time The insert’s rhombic CCMT form and the integrated single-sided chipbreaker help to manage chip formation consistently, which reduces the risk of chip re-cutting and tool damage when machining steels. The 0.2 mm corner radius contributes to a stable cutting edge for finishing and light profiling passes, while the relief angle of 7° supports reliable contact and clearance in holder systems. Together, these features enable smoother metal evacuation and reduce the likelihood of surface defects, so one can sustain higher cutting speeds and shorten cycle times. Compatibility and mounting guidance for shop-floor integration As an ISO turning insert, compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The CCMT09T302 comes with a cylindrical hole and a single-sided countersink (40°–60°), which suits many clamping systems on the market; the nominal plate thickness of 3.97 mm and 09 size are common dimensions that ease replacement. For effective integration, select a holder that matches the CCMT form and the specified tolerance class to ensure correct seating and stable cutting conditions. Practical advantages in day-to-day production Selecting the T9225 grade for steel machining offers a pragmatic compromise between wear resistance and toughness, particularly when facing variable engagement depths or intermittent cuts. The insert’s robustness helps maintain dimensional stability across longer batches and reduces the risk of unexpected tool failure. For production environments that value consistent output and predictable tool life, the design supports a smoother process flow and simpler tool management. Contact Metav Werkzeuge today to discuss how the Tungaloy CCMT09T302 T9225 insert (SKU 6781152-Tungaloy) can be matched to existing holders and machining plans — expert advice and order assistance are available from Metav Werkzeuge. Technical data Article number: 6781152 Manufacturer SKU: TUN6781152 SKU: 6781152-Tungaloy Designation: CCMT09T302 Series: ISO turning inserts Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Thickness: 3.97 mm Relief angle: 7° Insert size: 09 Included angle: 80° Countersink angle: 40°–60° Special features CVD-coated carbide (T9225) Single-sided chipbreaker Rhombic CCMT form with cylindrical hole and single-sided countersink Designed for medium to heavy steel turning ISO-standardised geometry; holder compatibility depends on form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT09T302 Tungaloy insert in grade T9225 is designed primarily for medium to heavy steel turning and performs well where toughness is needed under variable engagement. Does this insert fit standard CCMT holders? Yes, the insert follows ISO CCMT dimensions; however, correct fit requires matching the holder by form, relief (7°), tolerance class, fastening method and plate thickness (3.97 mm). What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker on the CCMT09T302 helps to control chip formation and evacuation during turning, improving surface finish and reducing the risk of chip-related interruptions. How does the T9225 grade differ from other grades? T9225 is a CVD-coated carbide grade formulated to balance wear resistance and toughness for robust, universal performance in steel machining under mixed cutting conditions. Can the insert handle interrupted cuts? Yes, the CVD-coated carbide substrate and the tougher T9225 grade offer enhanced resistance to chipping, making the insert suitable for applications with slight interruptions or variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with the ISO CCMT form and a 0.2 mm corner radius results in a robust, cost-efficient solution for medium to heavy steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. CCMT 09T302 T9225 – ISO turning insert for steel, Tungaloy The CCMT 09T302 T9225 is an ISO rhombic turning insert engineered for external and internal turning of steel, offering a CVD-coated carbide grade designed for stable chip formation and reliable performance under variable engagement conditions. CVD-coated carbide for improved wear resistance Universal T9225 grade for medium–heavy steel Rhombic CCMT form with 0.2 mm corner radius Cylindrical hole with 40°–60° countersink Extended tool life from a CVD-coated universal grade The CVD-coated T9225 carbide provides a balance of hardness and toughness that is particularly beneficial for medium to heavy machining of steel. The coating improves wear resistance and heat tolerance, which reduces flank wear and extends edge life under demanding conditions. This performance translates directly into fewer insert changes and higher machine uptime, delivering a measurable improvement in process economy while maintaining consistent cutting forces and surface integrity. Secure seating and ISO compatibility for process stability Designed to ISO dimensions, the rhombic CCMT shape ensures interchangeability with compliant holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert features a 7° relief and an 80° included angle that promote predictable contact geometry and repeatable clamping. The cylindrical hole with a single-sided countersink (40°–60°) guarantees accurate seating and secure clamping, which is essential for avoiding micro-movements that can shorten tool life or degrade surface finish. Controlled chip formation for interrupted and variable cuts The one-sided chipbreaker and the 0.2 mm corner radius support stable chip control across changing engagement conditions. This makes the insert suitable for slightly interrupted cuts or operations where engagement varies, as the grade’s toughness absorbs impacts while the chipformer manages evacuation. For best results, match the chipbreaker and cutting data to workpiece stability and fixture rigidity; the insert forms part of a system that includes the appropriate holder, shim or clamp set and fastening screws to maintain consistent process parameters. Practical application guidance for workshop efficiency When integrating the insert into a production cell, selecting a holder compatible with the CCMT form and the specified 3.97 mm thickness ensures optimal load distribution. The universal nature of the grade reduces the need for multiple specialised inserts, simplifying inventory and enabling rapid job changeovers. Clear labelling of insert designation and stock-keeping unit helps maintain traceability and repeatability across batches, supporting both small-series flexibility and larger-volume throughput. For dependable medium-to-heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for tailored cutting data and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6951128 Manufacturer SKU: TUN6951128 SKU: 6951128-Tungaloy Designation: CCMT09T302 T9225 Tungaloy-Wendeplatte Material: Hartmetall Facts Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Size: 09 Special features Grade: T9225 (CVD-coated carbide) One-sided chipbreaker With hole: cylindrical hole + single-sided countersink (40°–60°) ISO turning insert, rhombic CCMT form Application: turning; suitable for external and internal turning System: insert, compatible holder or boring bar, shim/clamp set and spare screws FAQ Is this insert suitable for interrupted cuts? The CCMT 09T302 T9225 insert is formulated for slightly interrupted cuts; the T9225 grade offers increased toughness while the chipbreaker aids reliable chip control during variable engagement. Which workpiece materials are recommended? The insert is optimised for steel machining; the CVD-coated carbide and universal grade are chosen to balance wear resistance and toughness for medium to heavy steel operations. How does the hole and countersink affect clamping? The cylindrical hole with a 40°–60° single-sided countersink ensures precise seating and consistent clamping force, improving repeatability and reducing the risk of insert movement during turning. What holder characteristics are required for correct fitment? Compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness. A holder matching the CCMT form and 3.97 mm thickness is required for secure and accurate clamping. Can one insert grade cover multiple jobs? The universal T9225 grade is intended to cover a broad range of medium-to-heavy steel turning tasks, simplifying tooling inventory and enabling faster job changeovers. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 T9225 Wendeplatten - Tungaloy
Benefit from the robust combination of a CVD-coated cemented carbide grade and the ISO CCMT geometry to secure stable, repeatable performance in medium-to-heavy steel turning. Order the CCMT09T302 insert directly via Metav Werkzeuge or request tailored advice from our consultants. CCMT09T302 T9225 CCMT insert for Turning — Tungaloy, CVD-coated carbide, 0.2 mm radius The CCMT09T302 Tungaloy insert is an ISO-standard rhombic turning grade designed for medium-to-heavy steel machining, offering a 0.2 mm corner radius, 7° clearance and a one-sided chipbreaker for controlled evacuation CVD-coated cemented carbide T9225 0.2 mm corner radius for fine finishing ISO rhombic CCMT 09 geometry, 80° cutting angle Compatible with standard ISO turning holders Consistent performance under variable engagement The insert is produced in a CVD-coated T9225 grade of cemented carbide, engineered to combine toughness with wear resistance. This composition is particularly suitable for fluctuating cutting conditions and slightly interrupted cuts, where edge stability is essential. The result is reliable tool life and fewer unscheduled tool changes, which supports continuous productivity and reduces process variability on serial turning operations. Proven geometry for secure clamping and predictable results The ISO-standard rhombic CCMT form with a nominal 09 size and an 80° approach angle gives predictable cutting behaviour and accessible edge geometry for both external and internal turning. The plate’s 3.97 mm thickness and the cylindrical hole with a one-sided countersink (40°–60°) require the correct clamping interface: form, clearance angle, tolerance class, fastening method, size and thickness determine holder compatibility. This standardisation simplifies insert replacement and inventory management across ISO-compatible toolholders. Practical benefits from coating, chip control and system design A CVD-coated surface decreases flank wear and helps preserve the cutting edge during sustained contact with steel, while the one-sided chipbreaker promotes efficient chip control, reducing built-up edge and improving surface finish. The insert integrates into a conventional ISO system consisting of an indexable insert, a matching outer holder or boring bar, a backing/clamping kit and spare screws. Choosing the appropriate chipbreaker and grade to match workpiece stability delivers measurable productivity gains and more consistent part quality. Contact Metav Werkzeuge today to discuss integrating the Tungaloy CCMT09T302 T9225 insert into production or to check current availability and delivery options Technical data Article number: 6951113 SKU: 6951113-Tungaloy Manufacturer SKU: TUN6951113 Model series: ISO-turning indexable inserts Designation: CCMT09T302 Key measurements Size: 09 Corner radius: 0.2 mm Thickness: 3.97 mm Clearance angle: 7° Cutting angle: 80° Materials & features Material: cemented carbide Coating/grade: CVD-coated, grade T9225 Geometry: rhombic CCMT Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning Typical system: ISO insert, outer holder/boring bar, backing/clamping set, spare screws FAQ Which materials is this insert optimised for? The CCMT09T302 in T9225 is optimised for medium-to-heavy steel turning and performs well where slightly interrupted cuts or variable engagement demand added toughness. How does the CVD coating affect tool life? The CVD-coated layer reduces flank wear and stabilises the cutting edge under continuous contact with steel, which leads to longer, more reliable tool life for the CCMT09T302 insert. What determines holder compatibility for this insert? Holder compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT09T302’s cylindrical hole and countersink require an ISO-compatible clamping interface. Can this insert be used for finishing and semi-finishing operations? Yes — the 0.2 mm corner radius and the one-sided chipbreaker make the insert suitable for fine finishing and semi-finishing where controlled chip formation and surface quality are required. Is the CCMT09T302 supplied with screws or clamping components? The standard offering is the indexable insert itself; system components such as the outer holder, backing/clamping set and spare screws are part of the overall toolset and should be selected to match the insert’s hole style and geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH110 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH110 carbide and a 0.4 mm corner radius for durable, process-stable turning; order the CCMT09T304 insert directly via Metav Werkzeuge or request advice from our consultants. CCMT 09T304 AH110 — ISO turning indexable insert for turning by Tungaloy A CCMT09T304 AH110 indexable insert designed for secure, process-stable external and internal turning applications PVD-coated carbide AH110 for durable edge life Rhombic CCMT form with 80° cutting angle 0.4 mm corner radius for controlled cutting forces Cylindrical hole with 40°–60° countersink for secure clamping Maximise uptime with a wear-resistant grade The AH110 grade is a PVD-coated carbide solution engineered for situations where a sharp cutting edge and high process stability are required. The coating reduces flank and crater wear, which translates directly into longer in-process tool life and fewer tool changes. For production environments this means improved machine uptime and predictable cycle times; the insert's wear characteristics support consistent surface finish and dimensional retention throughout longer batch runs. Geometry that sustains accuracy and secure clamping The rhombic CCMT geometry and an 80° cutting angle provide a robust contact area between insert and workpiece, improving stability in external and internal turning. A 0.4 mm corner radius moderates cutting forces to reduce vibration while still allowing effective material removal for semi-finishing tasks. The 7° relief angle assists chip flow and prevents rubbing. The central fixing — a cylindrical hole with a one-sided countersink (40°–60°) — ensures reliable clamping when used with compatible ISO holders, maintaining repeatable positioning and concentricity. Coating and substrate engineered for demanding turning The insert combines a tough carbide substrate with a PVD coating to resist abrasive wear and minimise chipping under interrupted cuts. This pairing is particularly effective in shop-floor turning where mixed workloads and variable stability can challenge tool life. The resulting performance delivers economical machining through reduced regrinding frequency and stable edge retention. For applications requiring a balance of sharpness and robustness, this coating-grade combination reliably preserves geometry and productivity. Practical selection and application guidance Designed for ISO-series turning systems, the insert is compatible with holders whose form, relief angle, tolerance class, fastening method, size and thickness match the plate specification. Select the single-sided chipbreaker variant and the AH110 grade when a combination of process security and a keen cutting edge is necessary. Typical system setup comprises the ISO insert, a matching external or boring holder, the appropriate shim/clamping kit and the recommended replacement screws to ensure full-function assembly and safe operation. For the productivity benefits of Tungaloy’s AH110-coated CCMT insert and tailored recommendations from Metav Werkzeuge, contact Metav Werkzeuge for ordering or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6818329 Manufacturer SKU: TUN6818329 SKU: 6818329-Tungaloy Model series: ISO turning indexable inserts Application: Turning Core technical data Plate designation: 09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Cutting angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Features and materials Material: carbide Coating: PVD AH110 Shape: rhombic (CCMT) Chipbreaker: single-sided Mounting: with hole Application: external and internal turning Compatibility: ISO holders determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What turning operations is this insert suitable for? The CCMT09T304 AH110 insert is designed for both external and internal turning operations where a combination of a sharp cutting edge and process security is required. What does the AH110 grade offer? AH110 denotes a PVD-coated carbide grade offering enhanced wear and chipping resistance, optimised for turning tasks that demand a reliable cutting edge and stable machining performance. How is the insert fixed to the holder? Fixing is achieved via the central cylindrical hole with a one-sided countersink (40°–60°), allowing secure clamping with the appropriate ISO-compatible screw and clamping kit for repeatable positioning. Which geometry features affect surface finish and stability? The rhombic CCMT form with an 80° cutting angle and a 0.4 mm corner radius contributes to stable cutting, controlled forces and improved surface finish during semi-finishing and finishing passes. What must be considered when selecting a holder for this insert? Holder compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder specification corresponds to the ISO plate dimensions and clamping style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH120 Wendeplatten - Tungaloy
Combining PVD-coated carbide resistance with a sharp cutting edge and CCMT geometry, this insert delivers consistent process security and reliable chip control for turning operations; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and grade selection. CCMT 09T304 AH120 ISO turning insert for external and internal turning — Tungaloy CCMT 09T304 AH120 is an ISO-compliant indexable insert designed for precision turning, offering a PVD-coated carbide grade that balances tool life and a sharp cutting edge for stable machining conditions PVD-coated carbide for wear resistance Sharp cutting edge for process security Single-sided chipbreaker for stable chip control Rhombic CCMT geometry, 80° orientation, 0.4 mm radius High stability and extended tool life for turning operations The AH120 grade is a PVD-coated carbide engineered to provide a balance between wear resistance and edge robustness. This results in improved component repeatability and fewer interruptions for insert changes, which benefits cycle times and overall productivity. The CCMT geometry and the sharp cutting edge improve engagement with the workpiece, while ISO compliance ensures straightforward selection of compatible holders by matching form, relief angle, tolerance class, fixing method, size and thickness. Predictable chip control and surface quality with targeted geometry A single-sided chipbreaker combined with the rhombic CCMT form helps to direct chips away from the cutting zone, reducing rework and machine downtime. The 80° orientation paired with a 0.4 mm corner radius offers a compromise between edge strength and surface finish; the small radius aids in achieving tighter profiles while maintaining edge stability. For customers less familiar with chipbreakers: a chipbreaker shapes the chip flow to avoid long, entangling swarf and to protect the tool edge during variable cutting conditions. Simple installation and assured clamping integrity The insert is supplied with a hole and a cylindrical hole style plus a single-side countersink (40°–60°), which supports secure clamping and repeatable seating in standard ISO-compatible holders. A plate thickness of 3.97 mm and the CCMT size designation facilitate mechanical stability under both external and internal turning loads. When integrating this insert into an existing toolset, match the insert form and tolerance class of the holder and choose the chipbreaker and grade according to workpiece stability and machining strategy for optimal results. Contact Metav Werkzeuge for tailored advice on Tungaloy CCMT 09T304 AH120 inserts and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6818332 Manufacturer item number: 6818332 Manufacturer SKU: TUN6818332 SKU: 6818332-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T304 AH120 Numbers Corner radius: 0.4 mm Free clearance angle: 7° Plate thickness: 3.97 mm Orientation/included angle: 80° Size designation: 09 Special features Material: carbide Coating: AH120 (PVD-coated) Plate form: rhombic (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) ISO-compliant indexable insert FAQ What turning tasks is this insert best suited to? This CCMT 09T304 AH120 insert is designed for ISO-compliant external and internal turning where a balance of edge sharpness and tool life is required. How does the AH120 coating benefit machining? The AH120 PVD-coated carbide grade on the Tungaloy insert increases wear resistance and supports stable cutting performance under variable conditions. Can the insert be used in standard CCMT holders? Yes, the CCMT geometry and the defined thickness and hole/countersink make the insert compatible with holders that match the insert form, relief angle and tolerance class. What role does the single-sided chipbreaker play? The single-sided chipbreaker on this insert controls chip formation and evacuation, reducing the risk of long swarf and improving process reliability. Is the 0.4 mm corner radius suitable for finishing operations? A 0.4 mm corner radius provides a compromise between strength and finish quality; it is effective for profiles requiring improved surface integrity with moderate edge robustness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH120 Wendeplatten - Tungaloy
The combination of a PVD-coated AH120 carbide grade, a precise 0.4 mm corner radius and an 80° rhomboid geometry ensures reliable chip control and extended edge life under demanding turning conditions; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. CCMT 09T304 AH120 ISO turning insert for general turning operations — Tungaloy CCMT09T304 AH120 is an ISO-standard rhomboid turning insert designed for external and internal turning, offering a sharp cutting edge and process-stable performance with a single-sided chipbreaker. ISO rhomboid insert CCMT 09T304 AH120 PVD-coated carbide for wear resistance 7° clearance angle for reliable cutting Single-sided chipbreaker for stable chips Consistent edge life for high-throughput turning The combination of a PVD-coated surface and a wear-resistant carbide substrate delivers predictable tool life that reduces downtime and regrinding frequency. The AH120 grade is formulated to resist abrasion and chipping, which translates into fewer interruptions during batch production. This stability benefits setups where repeatability is critical, since less tool variation helps maintain consistent component tolerances and surface finish. Precision geometry that supports versatile applications The rhomboid shape with an 80° included angle and a 0.4 mm corner radius enables both finishing and light semi-finishing passes while preserving a sharp cutting edge. A 7° clearance angle reduces rubbing on the flank face, improving heat evacuation and cutting efficiency when turning common materials. Compatibility with ISO toolholders depends on form, clearance angle, tolerance class, mounting and thickness, so the insert integrates into standard turning systems for a range of external and internal operations. Chip control and system guidance for reliable machining The single-sided chipbreaker is optimised for predictable chip formation in a wide range of turning conditions; this lowers the risk of entangling long swarf and simplifies post-process handling. The insert features a central hole with a cylindrical seat and a single-side countersink (40°–60°) to ensure secure clamping and repeatable position on the seat. When paired with a suitable external holder, clamp set and replacement screws, the system provides the process stability required for efficient production cycles. For process-stable turning with the Tungaloy AH120 grade, contact Metav Werkzeuge for supply and cutting data support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6824243 Manufacturer SKU: TUN6824243 SKU: 6824243-Tungaloy ISO designation: CCMT09T304 Brand: Tungaloy Material: Hartmetall Coating/grade: AH120 (PVD) Application: Turning (Drehen) Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Insert size: 09 Insert thickness: 3.97 mm Corner radius: 0.4 mm Clearance (relief) angle: 7° Included angle: 80° Designs / Special features Rhomboid plate form With hole; cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker PVD-coated carbide cutting material Suitable for external and internal turning FAQ What materials is this insert suited for? The CCMT09T304 AH120 insert with PVD-coated carbide is formulated for broad material coverage in turning; the AH120 grade offers wear resistance and edge security for common steels and mixed materials in general turning tasks. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on the CCMT09T304 AH120 helps produce predictable chip shapes and reduces the risk of swarf interference, improving cycle reliability and handling on automated or manual turning operations. Which holder and clamping should be used with this insert? Compatibility depends on holder form, clearance angle, tolerance class, mounting and thickness; the insert is ISO-standard and fits matching CCMT-compatible external or internal holders using the central hole and countersunk clamping arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of durable PVD‑coated carbide AH6225 and precise geometry for consistent medium‑duty turning of stainless steels; the robust 0.4 mm corner radius and 80° rhombic form ensure controlled chip formation and repeatable surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. CCMT09T304 AH6225 80° rhombic turning insert — 0.4 mm radius by Tungaloy A CCMT09T304 AH6225 rhombic turning insert designed for external and internal turning, optimised for medium machining of stainless steels and variable cutting conditions PVD-coated carbide grade AH6225 0.4 mm corner radius for controlled finishes 80° rhombic shape, suitable for ISO holders One‑sided chipbreaker with cylindrical hole Reliable cutting performance for mixed production The insert offers PVD‑coated carbide performance combined with the universal AH6225 grade to balance wear resistance and edge toughness. This configuration enables stable cutting when machining stainless steels, reducing the risk of premature flank wear while maintaining a sharp cutting edge. The net effect is fewer tool changes and a steadier cycle time in batch and series production, which improves overall equipment effectiveness. Geometry and chip control that support process stability A defined 0.4 mm corner radius and the 80° rhombic outline deliver predictable cutting forces and good access for finishing passes. The single‑sided chipbreaker is tuned to the insert form to produce short, controllable chips under varying feeds, making the insert suitable for both roughing and mixed finishing operations. Together with the insert thickness of 3.97 mm, the package provides a stable clamping interface and consistent cutting behaviour. Compatibility, mounting and handling explained Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; this insert follows ISO conventions for rhombic turning plates and fits standard ISO holders for the 09 size. The plate is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for reliable indexing and secure fastening. Using matched clamping hardware ensures repeatable seating and minimises runout during machining. Practical advantages for shop floor applications The combination of PVD coating and a robust carbide substrate helps to manage built‑up edge and thermal loads common when turning alloyed and stainless steels. The AH6225 grade supports a wide material range under moderate cutting parameters, which simplifies tool management: one insert can cover several workpiece grades and reduce inventory complexity. For production environments seeking dependable performance with minimal setup overhead, this insert offers an economical and technically sound option. For application-specific advice and to order the CCMT09T304 AH6225 insert from Tungaloy, contact Metav Werkzeuge for fast technical support and local availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6828947 Manufacturer SKU: TUN6828947 SKU: 6828947-Tungaloy Model series: ISO turning inserts Material: carbide Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Shape angle: 80° Special features Grade: AH6225 Coating: PVD Chipbreaker: one‑sided Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Plate form: rhombic Application: turning (external and internal); select chipbreaker and grade by workpiece material and stability FAQ What materials is this insert intended for? The CCMT09T304 AH6225 insert is designed primarily for machining stainless steels and offers a universal performance profile suitable for a broad range of alloyed steels under medium cutting conditions. How is compatibility with a holder determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the CCMT09T304 follows ISO specifications for 09‑size rhombic turning plates and fits corresponding ISO toolholders. Can this insert be used for internal turning as well as external turning? Yes, the rhombic shape and the one‑sided chipbreaker make the insert suitable for both external and internal turning operations, provided the holder and set‑up allow the required clearance. What advantages does the AH6225 grade provide? AH6225 combines a tough substrate with a PVD coating to balance edge sharpness and wear resistance, which helps to maintain surface integrity and extend tool life in varying machining conditions. Is the insert supplied with a mounting hole and what is its style? The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), ensuring secure fastening and correct seating in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, an 80° rhombic geometry and a 0.4 mm nose radius to achieve stable edge life and reliable finishing on stainless steels; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CCMT09T304 AH6225 Tungaloy Turning Insert — PVD-coated carbide, 0.4 mm radius The CCMT09T304 AH6225 is an ISO rhombic turning insert designed for medium machining operations and optimised for stainless steel turning applications. PVD-coated carbide for robust edge life Designed for stainless steel applications 0.4 mm nose radius for precise profiles ISO rhombic insert with 80° geometry Consistent machining performance for stainless steel turning The PVD-coated carbide grade AH6225 is formulated for a wide range of tasks on stainless steel, delivering a balance between a sharp cutting edge and edge stability under variable conditions. The coating reduces flank adhesion and improves wear resistance, so surface finish and tool life are both enhanced. For shops seeking predictable productivity, the coating and substrate combination ensures that the cutting edge is maintained across interrupted cuts and mixed feed rates. In practical terms, this means fewer insert changes and steadier part quality over long runs. Precise form control and chip management for reliable cycles The rhombic 80° geometry and 0.4 mm nose radius provide accurate profile definition and low cutting forces during finishing passes. A one-sided chipbreaker is integrated on the insert to assist controlled chip formation; this reduces the risk of tangling and improves evacuation in both external and internal turning. The insert is ISO-compatible, so holders are selected on the basis of ISO form, clearance angle, tolerance class, fastening method, size and thickness to guarantee correct seating and clamping. For engineers less familiar with indexable tooling, the term “chipbreaker” refers to a machined feature that breaks chips into manageable lengths, improving surface quality and machine uptime. Workshop handling and application guidance for efficient use The plate is manufactured in a rhombic form with a central hole and a single-sided countersink (40°–60°) that matches conventional clamping systems; plate thickness is 3.97 mm and nominal size is 09 (index 09). Because the insert is supplied to ISO standards, compatibility is determined by geometric match rather than brand alone, simplifying stocking and toolholder selection. The insert’s nominal clearance angle of 7° and its 80° main cutting angle are devised to support versatile turning operations, from external profiling to certain internal cuts when the holder allows. For best results, select feeds and speeds according to the workpiece batch size and rigidity of the setup, favouring moderate parameters for mixed or difficult-to-machine stainless steels. Contact Metav Werkzeuge today for tailored application advice or to order the CCMT09T304 AH6225 Tungaloy turning insert directly from stock; consultants are available to discuss holder compatibility and cutting data. Technical Data Article number: 6947659 SKU: 6947659-Tungaloy Manufacturer SKU: TUN6947659 Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T304 AH6225 Tungaloy-Wendeplatte Facts Radius: 0.4 mm Plate thickness: 3.97 mm Plate size/index: 09 Main cutting angle: 80° Clearance angle: 7° Special features PVD-coated carbide, grade AH6225 Rhombic plate form (80°) With hole; cylindrical hole + single-sided countersink (40°–60°) One-sided chipbreaker ISO-compatible turning insert for external and internal turning Intended application: Drehen (turning) Material: carbide FAQ Is this insert suitable for machining stainless steel? Yes. The CCMT09T304 AH6225 Tungaloy insert is a universal grade formulated for stainless steel and is optimised to combine a sharp cutting edge with edge stability under varying conditions. What holder characteristics are required for correct seating? Compatibility is based on ISO form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic form and central hole with countersink match standard ISO-compatible clamping systems. How does the 0.4 mm radius influence part finish? A 0.4 mm nose radius provides fine profile control and improved surface finish at finishing feeds; it also spreads cutting forces to enhance edge life compared with very small radii. Does the insert include a chipbreaker and how does it perform? Yes. The plate features a one-sided chipbreaker designed to produce shorter chips for safer evacuation and more consistent surface quality during turning operations. Can this insert be used for internal turning? Internal use is possible when combined with a suitable boring bar or holder that accommodates the 80° rhombic geometry and provides sufficient rigidity for the intended operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com