CNMG 160612 T5115 Wendeplatten - Tungaloy
Benefit from the combination of the T5115 CVD coating and the CNMG160612 geometry for a balance of wear resistance and edge stability; this supports consistent turning performance on cast iron. Order the CNMG160612 insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG160612 T5115 Turning Insert for Turning by Tungaloy The CNMG160612 T5115 Tungaloy insert is an ISO‑standard turning indexable insert designed for external and internal turning, offering a universal grade optimised for cast iron machining. CNMG160612 geometry, ISO‑standard insert CVD-coated carbide grade T5115 Double-sided chipbreaker for cast iron 80° rhombic shape with 1.2 mm nose radius Reliable, wear‑resistant grade for cast iron turning The T5115 grade is a CVD‑coated carbide developed as a universal solution for machining cast iron, combining wear resistance with edge stability. This balance reduces unexpected tool wear and extends time between indexings, which contributes to fewer interruptions in production. The coating supports consistent surface quality and helps to maintain a stable cutting edge under typical turning conditions, making the insert well suited where reproducible component quality and predictable tool life are priorities. Clear compatibility and mounting requirements for trouble‑free setup The insert follows ISO geometry rules, so compatibility with a clamping holder depends on formal parameters such as form, clearance angle, tolerance class, fastening, size and thickness. The CNMG160612 features a rhombic plate form with an 80° lead angle, a 0° clearance angle and a 6.35 mm plate thickness; it also has a cylindrical hole for secure fastening. These measurable values make it straightforward to match the insert to a suitable outer holder or boring bar: select a holder that matches the geometry and tolerance class to ensure correct seat, clamping force and repeatability. Productivity gains through stable chip formation and simple system integration A double‑sided chipbreaker design gives a practical combination of tool life and chip control, particularly in cast iron applications where chip formation affects both surface finish and machine cleanliness. The 1.2 mm nose radius provides a compromise between strength and surface finish, supporting medium to heavier feeds while maintaining acceptable component quality. The recommended system comprises the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws; this modular approach simplifies inventory and shortens changeover times, supporting productive machining cycles. Contact Metav Werkzeuge for availability and application advice on the Tungaloy CNMG160612 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850158 SKU: 6850158-Tungaloy Manufacturer SKU: TUN6850158 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications Insert designation: CNMG160612 ISO code: 160612 Thickness: 6.35 mm Size: 16 mm Nose radius: 1.2 mm Clearance angle: 0° Lead angle: 80° Features and applications Material: Carbide (CVD-coated) Grade: T5115 Chipbreaker: Double-sided Hole: Cylindrical hole Plate form: Rhombic Recommended use: Turning (external and internal) Suitable for: Cast iron System components: insert, holder, underlay/clamping set, spare screws FAQ What materials is this insert best suited for? The CNMG160612 with grade T5115 is optimised as a universal choice for cast iron, offering a compromise between wear resistance and edge stability that supports consistent performance in typical turning operations. How is compatibility with a holder determined? Compatibility depends on matching the insert geometry and measurable parameters: form, clearance angle (0°), tolerance class, fastening, size (16 mm) and thickness (6.35 mm); selecting a holder that aligns with these values ensures correct clamping and repeatable results. What advantage does the double‑sided chipbreaker provide? A double‑sided chipbreaker enables indexing of multiple cutting edges and improves chip control for cast iron turning; this can increase effective tool life and simplify tool management in a production environment. Which dimensions are most important when specifying this insert? Key dimensions are the plate designation CNMG160612, thickness 6.35 mm, nose radius 1.2 mm, lead angle 80° and the cylindrical hole style; these values are essential for choosing a compatible holder and ensuring correct seating. Can the insert be used for internal as well as external turning? Yes, the ISO‑standard geometry and the balanced characteristics of the T5115 grade make it suitable for both external and internal turning operations when paired with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5115 Wendeplatten - Tungaloy
Robust wear resistance and consistent edge stability make the CNMG160612 T5115 ideal for production turning of cast iron; its CVD-coated cemented carbide grade delivers extended tool life while the rhombic 80° geometry supports stable cutting and good surface finish. Order the CNMG160612 T5115 directly via Metav Werkzeuge or ask our consultants if needed. CNMG160612 T5115 CNMG indexable turning insert — ISO turning insert, rhombic 80°, Tungaloy The CNMG160612 T5115 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for productive machining of cast iron with a balance of abrasion resistance and cutting-edge stability. CVD-coated cemented carbide grade T5115 Optimised for cast iron machining Rhombic CNMG shape with 80° cutting geometry Double-sided chipbreaker, cylindrical hole design Corner radius 1.2 mm for robust cutting Consistent cutting performance through CVD-coated grade technology The use of a CVD-coated cemented carbide substrate, specified as T5115, provides a combination of wear resistance and maintained edge integrity that supports longer intervals between indexings. This universal grade is tailored for cast iron applications and is intended to reduce flank wear under interrupted and steady cutting conditions. For production environments, the result is fewer insert changes and improved process stability, which translates into higher machine uptime and lower unit production costs without compromising surface quality. ISO compatibility and secure clamping for repeatable results Designed to the ISO specification, the insert’s compatibility with clamping systems depends on shape, relief, tolerance class, fastening method, size and thickness. The rhombic CNMG form with an included angle of 80° and a 0° relief presents predictable engagement with holders; the cylindrical hole ensures positive seating and simplified replacement. As an ISO-standard component, the insert is intended for use with matching external holders or boring bars, together with shims, clamp sets and replacement screws, enabling a modular system build‑up that supports repeatable set-up and reduced fixturing errors. Application guidance: machining benefits and practical selection tips For external and internal turning, select the double-sided insert and a matching chipbreaker according to workpiece material, machining strategy and fixture stability; the integrated chip control design supports swarf removal and consistent cutting forces. The corner radius 1.2 mm provides a compromise between edge strength and surface finish, while the 6.35 mm thickness contributes to rigidity under heavy cuts. Properly matched, this insert reduces vibration, enhances dimensional repeatability and helps maintain a consistent tool life across batches. If uncertainty remains about the optimal grade or chipbreaker for a specific setup, technical advice is available to define parameters that preserve tool life and part quality. For original Tungaloy performance and swift supply, contact Metav Werkzeuge for tailored application advice and ordering of CNMG160612 T5115 inserts via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for details. Technical Data Article number: 6852900 SKU: 6852900-Tungaloy Manufacturer SKU: TUN6852900 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Facts Size: 16 Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 80° Special features ISO designation: CNMG160612 Grade/coating: T5115 (CVD-coated) Double-sided chipbreaker Rhombic plate form Cylindrical hole Application: Turning FAQ What materials is this insert optimised for? The CNMG160612 T5115 insert is optimised for cast iron machining; the T5115 grade balances abrasion resistance and edge stability for such materials. Can the insert be used for both external and internal turning? Yes—the ISO-format CNMG shape and cylindrical hole allow use in suitable external holders and boring bars for both external and internal turning operations. How is the insert mounted and secured in the holder? Compatibility is determined by form, relief, tolerance class, fastening, size and thickness; the CNMG160612 uses a cylindrical hole for secure seating and indexing in ISO-standard clamping systems. What benefits does the 1.2 mm corner radius provide? A corner radius of 1.2 mm increases edge robustness and helps absorb cutting forces, resulting in improved tool life and consistent surface finish under typical turning conditions. Is the insert reversible or single-use per side? The insert features a double-sided chipbreaker design, allowing both faces to be indexed for economical use and extended effective life of each insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5115 Wendeplatten - Tungaloy
Benefit from the combination of durable CVD coating, stable cutting edge and ISO compatibility for dependable turning performance and predictable tool life. The balanced wear resistance of the T5115 grade and the secure clamping provided by the rhombic CNMG form support efficient cycle times and fewer tool changes; order the CNMG160612 T5115 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for technical selection. CNMG 160612 T5115 ISO turning insert, rhombic 16 mm – Tungaloy A CNMG160612 T5115 insert for ISO-standard turning, engineered for cast iron machining and stable edge life. ISO rhombic insert, 16 mm size CVD-coated carbide grade T5115 Double-sided chipbreaker for cast iron Cylindrical hole for secure clamping Longer life and predictable wear for production runs The CVD-coated carbide grade T5115 is designed to balance wear resistance with edge stability, which reduces unplanned tool changes and supports higher uptime in production environments. For workshops processing cast iron, this coating fights abrasive wear while maintaining a consistent cutting edge, resulting in stable component tolerances and lower tooling cost per part. The performance is especially beneficial where repeatability and batch consistency are key. Secure clamping and simple ISO compatibility for fast setup Built to ISO standards, the rhombic CNMG form ensures compatibility with a wide range of external holders and boring bars when form, relief angle, tolerance class, clamping and thickness are matched. The plate measures 16 mm across the inscribed circle with a thickness of 6.35 mm and a corner radius of 1.2 mm, and it features a cylindrical hole for reliable fastening. These measurable attributes make it straightforward to verify holder acceptance and shorten set-up times on the shop floor. Improved chip control and surface quality in turning operations The double-sided chipbreaker is tailored for cast iron applications and improves chip formation, reducing the risk of entanglement and enhancing surface finish during both external and internal turning. Selecting the appropriate chipbreaker and grade according to workpiece stability and machining strategy yields better process security: fewer interruptions, consistent surface integrity and reduced secondary operations such as manual deburring. System-level efficiency and practical workshop benefits The insert is intended for use as part of a complete tool system: ISO indexable insert, suitable external holder or boring bar, and the necessary shim/clamp set and replacement screws. Standardised dimensions aid inventory management and make it easier to keep a compact, effective tooling stock. For CNC turning centres and job shops aiming for predictable throughput, this solution supports high availability and straightforward reconditioning of tool assemblies. For tailored advice on selecting the right Tungaloy CNMG160612 T5115 inserts for specific cast iron applications and to arrange supply from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery options Technical data Article number: 6850155 Manufacturer SKU: TUN6850155 Model series: ISO turning indexable inserts Brand: Tungaloy Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 80° Hole: cylindrical Special features Material: carbide Coating: CVD Grade: T5115 Shape: rhombic (CNMG) Chipbreaker: double-sided Application: turning Suitable for: cast iron System components: insert, holder/boring bar, shim/clamp, screws FAQ What materials is this insert best suited for? The CNMG160612 T5115 insert is optimised for machining cast iron, where the T5115 grade and CVD coating deliver a good compromise between wear resistance and cutting-edge stability. Can this insert be used on both external and internal turning operations? Yes, the CNMG160612 geometry and double-sided chipbreaker make the insert suitable for both external and internal turning when paired with the correct holder and machining parameters. Is the insert indexable and reversible? The plate is double-sided, providing two cutting edges per side where applicable; its ISO-compliant dimensions allow straightforward indexing and reversal in compatible holders. How is holder compatibility ensured for this rhombic plate? Compatibility depends on matching the insert form, relief angle, tolerance class, clamping method, size and thickness to the holder; the CNMG160612 follows ISO norms to simplify this verification. What benefits does the CVD coating bring in practice? The CVD coating on the T5115 grade increases abrasion resistance and helps maintain a stable cutting edge under typical cast iron conditions, extending tool life and improving process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5125 Wendeplatten - Tungaloy
Benefit from a CVD-coated carbide T5125 grade and a 1.2 mm corner radius that together improve edge stability and wear resistance during interrupted turning of cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for matching holder recommendations. The combination of ISO compatibility and a double-sided chipbreaker ensures economical indexing and consistent chip control in less stable machining conditions. CNMG160612 T5125 ISO turning indexable insert for turning by Tungaloy — CVD-coated carbide, 1.2 mm radius CNMG160612 T5125 is an ISO-form indexable turning insert designed for external and internal turning applications, optimised for cast iron machining under interrupted cuts or where machine-tool stability is limited. CVD-coated carbide grade T5125 for wear resistance 1.2 mm corner radius for enhanced edge strength Double-sided chipbreaker with cylindrical hole Reliable performance for cast iron and interrupted cuts The combination of a CVD-coated surface and the T5125 toughness class provides a durable cutting edge that resists flank wear while maintaining consistent cutting behaviour when machining cast iron. This specification is particularly advantageous for interrupted cuts or unstable setups where edge robustness is essential. The coated carbide substrate supports longer tool life and predictable flank wear progression, which reduces unplanned tool changes and increases overall productivity. The insert’s construction supports repeatable performance in series production and single-part machining alike. Geometry and secure mounting for stable turning The CNMG160612 geometry, featuring an 80° included angle and a 1.2 mm corner radius, delivers a favourable balance between cutting-edge strength and dimensional control. The relatively large corner radius increases resistance to chipping and improves surface finish consistency when forces are variable. A cylindrical mounting hole provides positive location in ISO-compatible holders; compatibility relies on matching the insert’s form, clearance angle, tolerance class, fastening method, size and thickness to the chosen toolholder. The insert’s 6.35 mm plate thickness contributes to overall stiffness, helping to damp vibrations in less rigid setups. Efficient chip control and economical edge usage The double-sided chipbreaker enables effective chip segmentation and evacuation during heavy interrupted cuts, improving process security and reducing the risk of built-up edge formation. Because the insert is indexable on multiple positions, the usable life per insert is increased, lowering cost per cutting edge and simplifying logistics. The CVD-coated carbide composition promotes stable chip formation across varying feed rates and cutting depths, so the machining process becomes more predictable. Where consistent surface quality and reduced cycle deviations matter, this insert provides a pragmatic balance between performance and economy. Choosing the right grade and further guidance Selecting the correct chipbreaker and grade is central to achieving the desired results: the T5125 grade is chosen for its toughness and adaptability to cast iron under interrupted conditions, while other grades or chipbreakers may be preferable for continuous light cuts or different materials. Compatibility with the toolholder must be checked — ISO form, clearance, and thickness are determining factors. If adaptation to an existing holder or a change of machining strategy is being considered, specialist advice helps to match holder geometry and indexation practices to the insert’s features and the intended process. For tailored application advice on the Tungaloy CNMG160612 T5125 indexable insert and assistance with holder selection or availability, contact Metav Werkzeuge for expert guidance and rapid delivery options Technical Data Article number: 6850156 Manufacturer SKU: TUN6850156 SKU: 6850156-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: T5125, CVD-coated Manufacturer: Tungaloy Core Numerical Data Corner radius: 1.2 mm Included angle: 80° Clearance (relief) angle: 0° Plate thickness: 6.35 mm Plate size: 16 mm Special features ISO-form CNMG160612 Double-sided chipbreaker Cylindrical mounting hole Rhombic plate shape Designed for turning (external and internal) Suited for interrupted cuts in cast iron Compatible with ISO holders depending on form, tolerance and fastening FAQ What materials is this insert designed for? The CNMG160612 T5125 insert from Tungaloy is specifically designed for machining cast iron, with the T5125 grade optimised for interrupted cuts and less stable conditions. How does the T5125 grade affect machining behaviour? The T5125 CVD-coated carbide provides increased toughness and wear resistance, resulting in stable chip formation and extended edge life when machining cast iron with variable cutting forces. Is the insert compatible with standard ISO holders? Yes, the insert is an ISO-form CNMG160612; compatibility depends on matching holder form, clearance angle, tolerance class, fastening and plate thickness to ensure secure seating. What are the advantages of the double-sided chipbreaker? The double-sided chipbreaker improves chip control during interrupted cuts and extends economical usage by allowing indexing to additional cutting positions. How does the 1.2 mm corner radius influence results? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping, helping to maintain surface quality when cutting conditions fluctuate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5125 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide and ISO-standard geometry for reliable turning in less stable conditions; the result is consistent chip control and extended tool life. For practical grade selection and supply, order directly via Metav Werkzeuge or consult the team for tailored recommendations. CNMG 160612 T5125 — Tungaloy turning insert, CVD-coated carbide, ISO CNMG form CNMG160612 T5125 is a rhombic ISO turning insert designed for external and internal turning, optimised for interrupted cuts and less stable machining conditions. CVD-coated carbide grade T5125 ISO CNMG shape with 80° cutting angle Suitable for cast iron and interrupted cuts Cylindrical hole fixation, double-sided chipbreaker Consistent performance where interruptions occur The insert delivers stable cutting even when machining interrupted surfaces, thanks to its CVD-coated carbide substrate and a tougher grade designed for cast iron applications. The CVD layer improves wear resistance while preserving edge integrity, which translates into fewer indexing cycles and predictable tool-life behaviour. For production environments with variable clamping or sporadic engagement, the combination of corner radius 1.2 mm and a robust grade reduces the risk of chipping and supports steady cycle times. Proven geometry for accurate fitting and repeatability ISO standardisation of the CNMG form ensures straightforward compatibility with a wide range of holders; the insert’s 80° cutting angle and 0° clearance are matched to common external holders and boring bars. The cylindrical central hole enables secure fixation and accurate repeatability when replacing inserts, while the double-sided chipbreaker provides two effective cutting edges per index. These features make the insert suitable for shops that prioritise process reliability and simplified tool inventory management. Efficient chip control and surface result for cast iron The selected T5125 grade is formulated to handle cast iron under interrupted cutting conditions, balancing toughness and wear resistance. The integrated chipbreaker allows controlled chip formation, reducing risks of entanglement and improving surface finish on ferrous materials. By aligning grade and chipbreaker to workpiece material and stability, the insert supports higher effective machining rates and can reduce secondary operations for finishing. Practical selection and application advice for workshops When choosing an insert for turning tasks, consider holder fit, workpiece material and stability of the setup. The CNMG ISO geometry is versatile for both external and internal turning; pair the insert with a matching ISO-compatible holder, ensure correct clamp torque and verify the clearance angles. For interrupted cuts or less rigid setups, prefer the tougher grade and a moderate feed to exploit the insert’s improved edge strength without sacrificing chip evacuation. For application-specific guidance on the Tungaloy CVD-coated inserts, contact Metav Werkzeuge for grade selection and delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850159 Manufacturer SKU: TUN6850159 SKU: 6850159-Tungaloy Material: Carbide Grade/coating: T5125 (CVD-coated) Facts Inscribed circle: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Clearance angle: 0° Special features ISO CNMG160612 geometry Rhombic plate form Cylindrical central hole for fixation Double-sided chipbreaker Designed for turning (external and internal) Suited for cast iron and interrupted cuts CVD-coated carbide grade T5125 FAQ What materials is this insert best suited for? The CNMG 160612 T5125 insert is formulated primarily for cast iron work, especially under interrupted cutting or less stable conditions, where toughness and chip control are crucial. How does the CVD coating affect performance? The CVD coating on the T5125 grade enhances wear resistance while maintaining edge toughness, improving tool-life stability during varying engagement and interrupted cuts. Is this insert compatible with standard CNMG holders? Yes, the insert follows ISO CNMG dimensions and secures via a cylindrical hole, ensuring compatibility with commonly used ISO CNMG external and internal holders. Can the insert be used for finishing passes? The insert can achieve good surface results with proper feed and speed, but final finishing may require a dedicated grade or geometry depending on tolerance and surface roughness requirements. How many cutting edges are available per insert? The double-sided chipbreaker design provides two usable cutting edges per indexed position, enabling efficient reuse and economical performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5125 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a rhombic 80° geometry ensures stable cutting in interrupted operations and less rigid set-ups; the double-sided chipbreaker and 1.2 mm corner radius support consistent chip control and predictable tool life. Order the CNMG160612 T5125 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 160612 T5125 rhombic turning insert, CVD-coated carbide, 80° — Tungaloy A CNMG160612 T5125 Tungaloy turning insert designed for external and internal turning, optimised for interrupted cuts and less stable machining conditions. CVD-coated carbide grade T5125 Rhombic plate, 80° cutting angle Double-sided chipbreaker, 1.2 mm radius Consistent chip control for interrupted turning and unstable setups The insert delivers reliable chip management through its double-sided chipbreaker, designed to stabilise chip formation even when cut conditions are variable. The combination of a CVD-coated surface and a tougher carbide substrate provides a compromise between wear resistance and fracture toughness, which is particularly useful for interrupted cuts in cast components. For manufacturing environments where machine rigidity fluctuates, this design reduces vibration-induced edge failure and supports a more predictable production flow. Durable cutting edge and material suitability explained Built from carbide with a CVD coating, the grade T5125 is formulated to resist adhesive wear while retaining sufficient toughness to tolerate shock loads. The 1.2 mm corner radius helps distribute cutting stresses and enhances edge robustness, extending useful edge life under impact-prone conditions. Although optimised for cast iron and similar materials, the insert’s construction offers a balance of wear resistance and fracture strength that suits a range of turning tasks where chip control and edge security are priorities. System compatibility and straightforward handling benefits As an ISO-standard turning insert, the plate integrates with holders and boring bars that match the CNMG form, thickness and fastening style. The 6.35 mm plate thickness and the cylindrical hole enable secure clamping and easy indexing to the second cutting edge, reducing downtime for tool changes. Clear identification by ISO designation and the manufacturer SKU simplifies inventory management and ensures that replacement inserts conform to the same tolerances and geometry as the originals. Productivity gains through predictable performance Selecting the right insert grade and chipbreaker can lower cycle variability and scrap rates, improving throughput and cost-efficiency. The combination of Tungaloy’s graded carbide and the rhombic 80° geometry supports stable cutting forces and consistent surface finishes, so operators experience fewer unexpected interruptions. For production lines handling cast components or jobs with intermittent engagement, this insert contributes to smoother operations and fewer unplanned tool exchanges. For secure procurement and technical advice on Tungaloy CNMG 160612 T5125, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to check availability and application guidance. Technical data Article number: 6852901 Manufacturer article number: 6852901 SKU: 6852901-Tungaloy Manufacturer SKU: TUN6852901 Model series: ISO turning inserts Label: CNMG160612 T5125 Tungaloy insert Facts Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Clearance (relief) angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided ISO designation: 160612 Special features Material: carbide Coating: CVD-coated Shape: rhombic Application: turning (external and internal) Optimised for: cast iron and interrupted cuts Indexable, two cutting edges per side ISO-standard geometry for holder compatibility FAQ What materials is this insert best suited for? The CNMG160612 T5125 turning insert is optimised for cast iron and similar materials, with the T5125 carbide grade engineered to withstand interrupted cuts and less stable machining conditions. Can this insert be indexed to use multiple cutting edges? Yes, the CNMG160612 T5125 is double-sided and designed for indexing; the rhombic plate and cylindrical hole permit secure clamping and rotation to a fresh edge as required. What are the key dimensions to check for holder compatibility? Check the ISO designation (160612), plate size (16 mm), thickness (6.35 mm) and hole style; these parameters determine compatibility with standard CNMG-compatible holders. How does the CVD coating affect performance? The CVD-coated carbide provides enhanced wear resistance while maintaining toughness, which helps the CNMG160612 T5125 deliver stable tool life during interrupted operations and variable cutting conditions. Is this insert suitable for finishing passes? While the CNMG160612 T5125 is primarily optimised for interrupted cuts and robustness, its geometry and coating can achieve satisfactory surface finishes where process stability is ensured. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide in the economical T515 grade, a double‑sided chipbreaker and a robust rhombic form for stable, productive turning of cast iron; compatibility is ensured by matching holder form, relief angle and size. Order the CNMG160612 T515 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG160612 T515 insert for turning — Tungaloy The CNMG160612 T515 is an ISO‑standard rhombic, CVD‑coated carbide turning insert designed for economical and productive machining of cast iron in external and internal turning applications ISO rhombic insert CNMG 160612 CVD‑coated carbide T515 for cast iron Double‑sided chipbreaker, cylindrical hole 80° cutting angle, 1.2 mm corner radius Consistent chip control for cast‑iron production The combination of a double‑sided chipbreaker and the T515 CVD‑coated carbide grade provides reliable chip formation and evacuation, which reduces cycle variability and improves process stability during turning of cast iron. The chipbreaker geometry is matched to the insert form and promotes short, controllable chips even under interrupted cuts; this feature lowers the risk of tool nose damage and minimises secondary operations related to swarf handling. Such controlled chip behaviour supports higher effective utilisation of machining centres and enhances overall shop throughput. Precise fit and simple mounting to existing holders Designed as an ISO‑standard indexable insert, the rhombic shape with a cylindrical hole and standard fixation details makes the component compatible with a wide range of ISO holders and boring bars when the holder’s form, relief angle, tolerance class, fastening method, size and thickness match. The insert’s geometry and the 80° cutting angle result in a good compromise between radial strength and access to workpiece features, while the 1.2 mm corner radius increases edge robustness for medium‑depth cuts. Clear compatibility criteria help planning and reduce setup times in production environments. Coating and grade explained for dependable tool life The CVD‑coated carbide substrate offers a wear‑resistant surface that stands up to the abrasive nature of many cast‑iron grades. The T515 grade is tuned for economical machining: it balances tool life, stable flank wear progression and acceptable edge strength so that longer tool life is achievable without sacrificing productivity. For users less familiar with coating technology, CVD (chemical vapour deposition) produces a uniform, adherent coating that improves heat resistance and reduces adhesive wear, which translates into more predictable replacement intervals and less unplanned downtime. Productivity benefits for job shops and production lines Using an indexable insert with clearly defined specifications — CNMG160612, 6.35 mm plate thickness and standard ISO sizing — simplifies inventory management and reduces the need for frequent regrinds or special tooling. The rhombic form and the chosen corner radius make the insert versatile across facing, profiling and medium roughing tasks; this versatility supports faster setup changes and fewer tool types per machine. In short, the insert helps maintain a steady machining flow, reduces handling complexity and contributes to repeatable component quality. Contact Metav Werkzeuge for stock availability and material‑specific recommendations on Tungaloy CNMG160612 T515 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Manufacturer article number: 6744299 SKU: 6744299-Tungaloy Manufacturer SKU: TUN6744299 Model series: ISO‑turning indexable inserts Core specifications Insert designation: CNMG160612 Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Hole: with cylindrical hole Materials & special features Substrate: carbide Coating: CVD Grade: T515 (for economical cast‑iron machining) Plate form: rhombic Chipbreaker: double‑sided Application: turning (external and internal) Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for cast‑iron machining? Yes. The CNMG160612 T515 insert is specified for economical machining of cast iron; the T515 grade and CVD coating support stable chip formation and wear resistance in such applications. Which holders fit the CNMG160612 geometry? Compatibility requires a holder matching the ISO rhombic form, relief angle, tolerance class, fastening and plate thickness; selecting a matching ISO holder ensures secure clamping of the CNMG160612 insert. Can the insert be used for internal turning as well as external turning? Yes. The insert’s rhombic form and 80° cutting angle make it suitable for both external and internal turning tasks, provided an appropriate boring bar or internal holder is used. What does the double‑sided chipbreaker mean in practice? A double‑sided chipbreaker provides chip control on both usable faces of the insert, allowing rotation to a fresh edge and extending the effective service life compared with single‑sided variants. What are the key dimensions to check before purchase? Check the insert designation (CNMG160612), plate size (16 mm), plate thickness (6.35 mm), corner radius (1.2 mm) and whether the holder accepts a cylindrical hole for proper fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 T515 Wendeplatten - Tungaloy
Combine economical machining, stable chip control and an 80° geometry for dependable turning results; benefit from the T515 grade and CVD coating for long tool life. Order the CNMG160612 T515 Tungaloy insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG160612 T515 — ISO turning indexable insert for turning, Tungaloy (CVD-coated carbide, 80°) The CNMG160612 T515 is an ISO‑standard rhombic indexable insert engineered for efficient external and internal turning operations, optimised for cast iron applications with a robust chip control geometry. CVD-coated carbide grade T515 Optimised for economical cast iron machining Double-sided chipbreaker for reliable chips Rhombic CNMG shape with 80° geometry Maximise cutting efficiency with a grade engineered for cast iron The CVD‑coated T515 carbide grade delivers a consistent combination of wear resistance and toughness, supporting higher cutting speeds in many cast iron turning tasks. By choosing this CVD-coated carbide insert, the operation benefits from reduced tool-change frequency and improved cycle time, translating into tangible productivity gains on the shop floor. The design emphasises process stability: stable chip formation and predictable flank wear help maintain surface finish and dimensional consistency when machining grey and nodular cast irons. Secure clamping and geometry that support dependable tool life The CNMG form with an 80° lead angle and a 1.2 mm corner radius provides a balanced approach between strength and versatility, giving a smooth load distribution on the cutting edge. The insert’s double-sided chipbreaker and cylindrical hole ensure secure locating and simple indexing in compatible ISO holders. For production environments where vibration or interrupted cuts occur, the geometry and thickness help sustain tool life and reduce the risk of premature edge failure, supporting a reliable machining process. Practical selection and handling for workshop use Compatibility with holders is determined by ISO form, relief angle and tolerance class; the insert’s 0° clearance angle and 6.35 mm thickness fit standard CNMG clamping systems. Selecting the appropriate chipbreaker and matching the T515 grade to the workpiece stability and desired cutting speed simplifies setup and reduces trial‑and‑error. Clear, measurable attributes such as corner radius and insert thickness make setup reproducible, while the CVD coating helps protect against built‑up edge and thermal wear during longer cycles. For application advice, availability or to discuss how the Tungaloy CNMG160612 T515 can improve turning performance, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert guidance Technical data Manufacturer article number: 6764414 SKU: 6764414-Tungaloy Manufacturer SKU: TUN6764414 Model series: ISO turning indexable inserts Article name: CNMG160612 T515 Tungaloy insert Facts Insert designation: CNMG160612 Angle: 80° Corner radius: 1.2 mm Thickness: 6.35 mm Size: 16 mm Clearance angle: 0° Hole: with cylindrical hole Special features Material: CVD‑coated cemented carbide (T515) Suitable for cast iron machining Rhombic CNMG geometry (ISO) Double-sided chipbreaker Compatibility: ISO holder dimensions determine fit FAQ Is this insert suitable for machining cast iron? Yes. The CNMG160612 T515 insert features a T515 CVD‑coated carbide grade developed for economical and productive cast iron machining. Which holder types are compatible with this insert? Compatibility is based on the ISO CNMG form: holder fit depends on form, relief angle, tolerance class, fastening method, size and thickness as specified for the CNMG160612. What are the insert’s key dimensions to consider at set‑up? Key values are: 80° geometry, 1.2 mm corner radius, 6.35 mm thickness and a 16 mm inscribed circle; these determine cutting behaviour and clamping requirements. Is the insert indexable on both sides? The CNMG160612 is double‑sided with a chipbreaker on each face, allowing use of both sides for economical edge utilisation. How does the CVD coating affect performance? The CVD coating on the T515 grade improves thermal and abrasive wear resistance, enhancing tool life and allowing stable cutting parameters in many cast iron operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO CNMG geometry and straightforward holder compatibility for reliable stainless-steel turning. Order the insert directly via Metav Werkzeuge or consult the technical team if advice is needed. CNMG160612 T6215 turning insert for turning — Tungaloy A CNMG160612 T6215 indexable turning insert designed for external and internal turning, optimised for stainless-steel machining under stable to slightly interrupted conditions. CVD-coated carbide grade T6215 Optimised for stainless steels Rhombic ISO CNMG 16 × 6.35 profile Double-sided chipbreaker with cylindrical hole Consistent wear resistance for dependable production The CVD-coated grade T6215 provides enhanced abrasion resistance suited to the demands of machining stainless steels. The deposit and substrate combination reduces flank and crater wear during longer cycles, which translates into prolonged tool life and fewer interruptions in production. For operations prioritising predictable tool change intervals and repeatable surface quality, this wear-resistant grade supports higher process reliability and lower overall tooling cost per part. Precision geometry that improves machining stability The rhombic CNMG geometry with an 80° wedge and a 1.2 mm corner radius gives a balanced edge that tolerates varying cutting directions while maintaining cutting stability. The 6.35 mm plate thickness contributes to rigidity, and the double-sided chipbreaker helps control chip formation in both light and moderate cutting conditions. These geometry choices reduce vibration and promote consistent dimensional accuracy when matched with a correctly specified holder and clamping arrangement. Easy integration into ISO tool systems for faster set-up As an ISO-standard indexable insert, compatibility is defined by form, clearance, tolerance class, fastening and plate dimensions, so interchangeability with suitable holders and boring bars is straightforward. The recommended system includes the insert, an appropriate external holder or boring bar, a shim/clamping set and replacement screws for safe mounting. For application-specific guidance on selecting the optimal chipbreaker and cutting data, Metav Werkzeuge can provide technical advice to align the insert performance with production goals. Discuss Tungaloy CVD-coated inserts and holder compatibility with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and technical consultation Technical Data Article number: 6903028 SKU: 6903028-Tungaloy Manufacturer SKU: TUN6903028 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Angle: 80° Corner radius: 1.2 mm Thickness: 6.35 mm Size (inscribed circle): 16 mm Clearance angle: 0° Grade/coating: T6215 (CVD-coated carbide) Special features ISO-standard indexable insert Double-sided with cylindrical hole Rhombic plate form (CNMG) Designed for stainless-steel turning under stable to slightly interrupted cuts System: insert, external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this grade best suited for? The CNMG160612 T6215 Tungaloy turning insert is specified for stainless steels, offering improved wear resistance for that material group. Can this insert be used for both external and internal turning? Yes. The geometry and mounting style of the CNMG insert support both external and internal turning when combined with a compatible holder or boring bar. Is the coating type suitable for semi-continuous cuts? The T6215 grade is a CVD-coated carbide designed for stable to slightly interrupted cutting conditions, making it appropriate for many semi-continuous stainless-steel operations. How does the CNMG geometry affect chip control? The rhombic CNMG form with a double-sided chipbreaker promotes controlled chip formation across a range of feeds and depths, aiding consistent surface finish and reduced rework. What should be considered when choosing a holder for this insert? Compatibility depends on shape, clearance, tolerance class, fastening, size and thickness; pairing the CNMG insert with the correct holder and clamping components is essential for process stability Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9205 grade, a 1.2 mm nose radius and ISO compatibility to improve cycle times and achieve consistent surface finish in steel turning; order directly via Metav Werkzeuge or consult the team for application-specific recommendations. CNMG 160612 T9205 Turning insert — CVD-coated carbide for turning — Tungaloy CNMG160612 T9205 indexable insert for productive external and internal turning of steel under stable cutting conditions CVD-coated carbide grade T9205 for steel machining Optimised for productive turning and higher cutting speeds ISO CNMG 160612 rhombic insert with cylindrical hole Double-sided chipbreaker, 1.2 mm nose radius Improve throughput with a wear-resistant CVD coating The CVD-coated carbide grade T9205 combines wear resistance with predictable flank wear, allowing longer tool life under stable machining conditions. In productive turning operations, this translates into fewer insert changes and reduced downtime, contributing to a better overall equipment effectiveness (OEE). The coating process produces a hard, adherent layer that sustains higher cutting speeds while maintaining a consistent edge, which benefits batch production and repetitive components. Selecting a grade matched to steel and a robust set-up helps exploit the full potential of the insert. Reliable mounting and dimensional compatibility for quick tool changes The ISO CNMG160612 form ensures compatibility with standard turning holders; the rhombic 16 mm inscribed circle, 6.35 mm thickness and the cylindrical hole facilitate precise clamping and repeatable positioning. A 1.2 mm nose radius and the 0° relief angle support a balance between edge strength and surface finish. These dimensional characteristics reduce set-up variation and simplify inventory management: the insert fits established toolholders and clamping sets used across shops, enabling swift replacement and consistent part quality without lengthy requalification. Choose the right chip control and process parameters for steady results The double-sided chipbreaker design delivers consistent chip formation under typical turning feeds and depths for steel. In combination with a stable machine set-up and suitable coolant strategy, this promotes safe chip evacuation and lowers the risk of edge damage. For best results, pair the insert with a rigid external holder or boring bar appropriate for the turning task and select feeds that match the chipbreaker geometry. The insert’s properties favour medium to high cutting speeds in stable conditions, optimising cycle time while preserving surface integrity and repeatability. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts or to request stock and delivery information: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6785693 SKU: 6785693-Tungaloy Manufacturer SKU: TUN6785693 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Inscribed circle: 16 mm Plate thickness: 6.35 mm Nose radius: 1.2 mm Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Design & features ISO designation: CNMG160612 Coating / grade: CVD-coated carbide T9205 Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO turning holders and clamping sets FAQ What materials is this insert designed for? The CNMG160612 T9205 insert is designed primarily for productive turning of steel and is supplied as a CVD-coated carbide grade suited to stable cutting conditions. How does the T9205 grade affect tool life and speed? The T9205 CVD-coated grade increases wear resistance, enabling higher cutting speeds in many steel applications while offering predictable flank wear and longer intervals between indexings. Can this insert be used for internal turning as well as external turning? Yes, the rhombic CNMG160612 form and the cylindrical hole make the insert suitable for both external and internal turning when paired with the appropriate holder or boring bar. Which dimensional data should be checked for holder compatibility? Verify the inscribed circle (16 mm), plate thickness (6.35 mm), and hole style (cylindrical) against the holder specifications to ensure secure clamping and correct positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a robust 1.2 mm corner radius and ISO conformity for consistent, productive turning results; order the insert directly via Metav Werkzeuge or request compatibility advice from their consultants. CNMG 160612 T9205 indexable insert for turning by Tungaloy — rhombic 80° geometry, CVD-coated grade CNMG160612 T9205 indexable insert designed for productive external and internal turning on steel under stable cutting conditions CNMG 160612 geometry for ISO turning CVD-coated carbide grade T9205 for steel 80° rhombic form with 1.2 mm corner radius Double-sided insert with cylindrical hole Consistent productivity from a CVD-coated carbide grade The CVD-coated cemented carbide grade T9205 is developed for productive machining of steel at elevated cutting speeds while maintaining wear resistance. The coating adds a hard, thermally stable surface that reduces flank wear and heat-related loss of edge life; this results in improved tool life and more predictable machining cycles. For operations where process stability and repeatable performance matter, the coated grade supports longer uninterrupted cutting times and reduces the frequency of tool changes, contributing to lower overall machining costs. Precise geometry for reliable clamping and repeatability The rhombic 80° shape with a 0° clearance and standard ISO dimensions ensures straightforward integration into common external holders and boring bars. Compatibility with a clamping system depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-conformant geometry simplifies selection of the correct holder. The insert’s cylindrical locating hole and standard thickness of 6.35 mm provide secure seating and repeatable indexability, helping to maintain concentricity and surface finish across multiple indexings. Stable chip control and stronger cutting edge Equipped with a double-sided chipbreaker, the insert offers balanced chip formation for many turning operations, enhancing evacuation and reducing the risk of built-up edge under recommended conditions. The 1.2 mm corner radius increases edge strength where contouring and moderate interrupted cuts occur, supporting better surface integrity and dimensional stability. In short cycle applications the combination of corner radius and chip control contributes to consistent component quality and lower scrap rates. System-oriented handling and application guidance The insert is part of an ISO indexable insert system that includes the mating external holder, shim/clamping set and replacement screws. When specifying for a shop, select the chipbreaker and grade that match the workpiece, machining strategy and machine rigidity; for this grade, stable setups and higher cutting speeds are ideal. The insert’s rhombic form and double-sided design mean two working edges per side, enabling economical use of the insert in serial production and straightforward inventory management. Contact Metav Werkzeuge for tailored holder compatibility checks and to source the Tungaloy CNMG160612 T9205 indexable insert directly; consultants are available to advise on optimal grade and chipbreaker selection. Technical Data Article number: 6785700 Manufacturer SKU: TUN6785700 Stock SKU: 6785700-Tungaloy Model series: ISO indexable turning inserts Material: cemented carbide Application: Turning Facts Cutting angle: 80° Corner radius: 1.2 mm Thickness: 6.35 mm Size: 16 mm Clearance angle: 0° Hole: with cylindrical hole Special features Grade: T9205 Coating: CVD-coated Shape: rhombic Chipbreaker: double-sided Insert designation: CNMG160612 Suitable for external and internal turning ISO-conformant geometry FAQ What materials is this insert intended for? The Tungaloy CNMG160612 T9205 indexable insert is optimised for machining steel in stable cutting conditions; the CVD-coated cemented carbide grade offers wear resistance at higher cutting speeds. How does one confirm holder compatibility for this ISO insert? Compatibility is determined by the ISO geometry and by matching holder form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG160612 designation helps to select the correct external holder or boring bar. What advantages does the T9205 grade provide compared with uncoated grades? T9205’s CVD-coated surface increases thermal and abrasive resistance versus uncoated carbide, yielding longer edge life and more consistent performance when turning steel at elevated speeds. How many usable cutting edges are available per insert? Due to the double-sided configuration and the rhombic form, the insert can be indexed multiple times; the CNMG160612 design provides economical reuse of cutting edges for serial production. Is the insert suitable for internal as well as external turning? Yes — the ISO CNMG geometry and the cylindrical locating hole allow use in suitable external holders and boring bars for both external and internal turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Stable edge life from the T9205 CVD‑coated carbide together with the robust 80° CNMG geometry ensures consistent, productive turning of steel; the double‑sided design and 1.2 mm corner radius deliver economical indexable performance — order the CNMG160612 T9205 directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. CNMG 160612 T9205 Turning indexable insert by Tungaloy, CVD‑coated carbide, 80° The CNMG160612 T9205 Tungaloy insert is an ISO‑standard indexable insert for productive external and internal turning, developed for stable machining of steel at elevated cutting speeds. CVD-coated carbide grade T9205 Optimised for productive steel turning 80° geometry for robust cutting Double-sided insert with 1.2 mm radius Increase productivity with a wear-resistant carbide grade The combination of a CVD‑coated carbide substrate and the T9205 grade is engineered for sustained performance in demanding turning operations. The coating improves wear resistance and heat tolerance, which translates into longer tool life under higher cutting speeds and consistent dimensional results. For production environments where cycle time and reproducibility matter, this graded carbide keeps process stability high and frequency of index changes low, improving overall throughput and lowering running costs. Geometry designed for stability and versatility The insert’s 80° approach geometry and 0° relief angle provide a balance of cutting-edge strength and general-purpose versatility; the slightly blunt orientation increases resistance to mechanical loads while remaining suitable for both finishing and medium‑depth cuts. The 1.2 mm corner radius contributes to edge robustness, reducing the risk of chipping on interrupted cuts and supporting steady surface quality. The double‑sided layout doubles index life per insert, making it a cost‑effective choice for batch production. Clear compatibility and straightforward setup As an ISO‑standard turning plate, compatibility with holders is defined by form, relief angle, tolerance class, clamping method, size and thickness. The CNMG160612 format fits standard CNMG external and boring holders that accept a 16 mm inscribed circle and a 6.35 mm plate thickness. The insert’s cylindrical hole supports secure clamping and repeatable positioning, simplifying changeovers and ensuring alignment accuracy. Choosing the correct chipbreaker variant and matching the grade to material and machine rigidity maximises performance. Practical benefits for everyday machining When processing steel under stable conditions, this insert offers a reliable blend of process security and value: fewer interruptions from edge failures, predictable wear behaviour and easier planning of tool inventories. The double‑sided indexable design reduces per‑cut cost, while the T9205 coating maintains cutting performance across longer tool life. For workshops seeking to combine productivity with consistent surface quality, the insert provides measurable efficiency gains without adding complexity to setup and programming. Contact Metav Werkzeuge today to discuss the CNMG160612 T9205 turning insert, request cutting data or receive tailored recommendations for holders and chipbreakers — Metav Werkzeuge’s team is ready to advise. Technical data Article number: 6785680 Manufacturer SKU: TUN6785680 SKU: 6785680-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle: 16 mm Approach angle: 80° Relief angle: 0° Special features CVD-coated carbide (T9205) Double-sided chipbreaker Rhomboidal plate shape With cylindrical hole ISO designation CNMG160612 Application: turning of steel FAQ Which materials is this insert best suited for? The T9205 grade is optimised for productive turning of steel; the CNMG160612 insert performs well in stable cutting conditions and at elevated speeds. Is the insert indexable and double‑sided? Yes, the CNMG160612 is a double‑sided indexable insert, providing two usable edges per side for economical usage. What does the 80° geometry mean for machining? An 80° approach angle increases edge strength and gives versatility across finishing and medium‑depth turning applications, offering good balance between cutting forces and surface finish. How is compatibility with holders ensured? Compatibility depends on form, relief angle, tolerance class, clamping type, size and thickness; CNMG160612 fits holders designed for CNMG format with 16 mm inscribed circle and 6.35 mm plate thickness. Which chipbreaker should be selected? Select a chipbreaker that matches the workpiece material, depth of cut and machine stability; the insert is available with the specified double‑sided chipbreaker suitable for common steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9205 for high productivity and the CNMG160612 geometry with a 1.2 mm corner radius for consistent edge life; order directly via Metav Werkzeuge or contact our advisers for application-specific advice. CNMG160612 T9205 turning insert — Tungaloy CNMG160612 T9205 is an ISO‑standard turning insert designed for productive external and internal turning under stable conditions CVD-coated carbide grade T9205 Rhombic 80° geometry, 1.2 mm radius Double-sided chipbreaker for stable cuts ISO-standard CNMG with cylindrical hole Delivering sustained productivity with CVD-coated carbide The CVD‑coated T9205 grade combines a wear-resistant coating with a robust carbide substrate to support higher cutting speeds and extended tool life. In practice, this means fewer insert changes and more uptime on production machines. The coating improves abrasion resistance during interrupted cuts and long light-duty turning cycles, while the substrate sustains edge stability under stable clamping conditions. These properties translate into a measurable increase in productivity for batch and continuous turning operations. Geometry that ensures predictable component quality The rhombic 80° shape and 1.2 mm corner radius provide a compromise between strength and profile control, making the insert suitable for medium to heavy turning passes where dimensional stability matters. The 0° relief angle is typical for this family and aids in maintaining constant cutting engagement; the double-sided chipbreaker promotes consistent chip formation and evacuation. Compatibility with the toolholder depends on form, relief, tolerance class, fastening, size and thickness, so correct holder selection is essential for repeatable surface finish and tool life. ISO standardisation simplifies tooling decisions As an ISO‑turning insert, the CNMG160612 fits into standard toolholder systems when dimensions match, and the cylindrical hole supports secure clamping and indexing. The plate thickness of 6.35 mm and the nominal size of 16 mm are common values that ease stock management and replacement planning. Using ISO‑standard components reduces setup variation and supports predictable cycle times across different machines and shifts, which benefits line balancing and order fulfilment. Best applications and material focus This insert is optimised for turning steel under stable conditions and at elevated cutting speeds, where the wear-resistant coating shows its strengths. Choose the T9205 grade when a consistent combination of surface quality and sustained edge life is required. For different workpiece materials or unstable setups, select an alternative chipbreaker or grade matched to the specific alloy and cutting parameters to maintain safety margins and efficiency. Contact Metav Werkzeuge for tailored application support and to source the Tungaloy CNMG160612 T9205 insert; specialist advice and prompt delivery are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785788 SKU: 6785788-Tungaloy Manufacturer item no.: TUN6785788 Model series: ISO turning inserts Material: carbide Designation: CNMG160612 T9205 Facts Corner radius: 1.2 mm Included angle: 80° Relief angle: 0° Thickness: 6.35 mm Size: 16 mm Hole: cylindrical (with hole) Design and special features CVD‑coated carbide, grade T9205 Rhombic plate form Double-sided chipbreaker ISO‑standard insert, compatible with ISO holders System composition: insert, external holder or boring bar, support/clamp set and spare screws FAQ What materials is this insert intended for? This insert is designed primarily for turning steel; the T9205 grade is a wear‑resistant CVD‑coated carbide optimised for productive steel turning under stable conditions. How does the chipbreaker affect performance? The double‑sided chipbreaker on the CNMG160612 promotes reliable chip control and evacuation, which helps maintain consistent surface finish and reduces the risk of chip entanglement during medium to heavy cuts. Will this insert fit existing CNMG holders? Compatibility depends on form, relief, tolerance class, fastening, size and thickness; the CNMG160612 is ISO‑dimensioned, but holders must match the 16 mm size, 6.35 mm thickness and cylindrical hole for secure clamping. What corner radius is available and when should it be used? The insert features a 1.2 mm corner radius, a good choice for achieving a balance between edge strength and dimensional control on parts that require consistent profiles. Can the CNMG160612 T9205 be indexed to use both sides? Yes, the plate is double‑sided; indexing extends usable life and supports economical part runs when the holder and clamping system allow safe re‑indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and the ISO CNMG geometry for efficient, high‑throughput turning in medium steels; the insert’s double‑sided chipbreaker and robust corner radius support continuous to lightly interrupted cuts. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting recommendations. CNMG160612 T9215 turning insert (ISO) — Tungaloy, rhombic 16 mm, 0° clearance A CNMG160612 T9215 ISO rhombic turning insert designed for medium steel machining; CVD‑coated carbide for enhanced wear resistance and stable cutting in continuous and lightly interrupted turning operations CVD-coated carbide grade T9215 ISO rhombic insert CNMG160612 Double-sided chipbreaker for turning 16 mm size, 1.2 mm corner radius Boosted productivity through material and coating technology The insert combines a CVD-coated surface with a wear‑resistant carbide substrate, providing a balance of wear resistance and fracture toughness that supports higher machining speeds and longer tool life. For workshop planners and production engineers, this means fewer indexings and more consistent component quality across runs. The chosen grade T9215 is optimised for medium steel and performs reliably in continuous to slightly interrupted cuts, reducing downtime and maintaining surface finish without the need for frequent regrinding. Precision fit and predictable system behaviour The ISO CNMG160612 geometry ensures predictable seating and repeatable orientation in standard holders; compatibility depends on form, clearance, tolerance class, fixation, size and thickness. Key dimensions such as 16 mm inscribed circle, 6.35 mm plate thickness and an 80° included angle provide the mechanical stability required for external and internal turning. The insert’s cylindrical hole and standard mounting pattern make replacement straightforward when paired with the correct backing pad and clamping set. Selecting the right holder and clamp avoids chatter and preserves the insert’s performance characteristics. Practical guidance for machining and system assembly Use the double‑sided chipbreaker when cutting medium steels to promote controlled chip formation and consistent evacuation; this reduces tool temperature and helps maintain dimensional accuracy. The insert is supplied as part of a system comprising the ISO insert, a matching external holder or boring bar, a backing plate/clamp kit and replacement screws — ensure all components meet the same tolerance class for best results. For interrupted cuts, verify clamping rigidity and consider reduced depth of cut; for long production runs, the grade’s robustness supports higher material removal rates with stable edge life. For precise holder selection and delivery of CNMG160612 T9215 inserts, contact Metav Werkzeuge for an application review and the required article details; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772496 Manufacturer SKU: TUN6772496 SKU: 6772496-Tungaloy Material: carbide Coating: CVD Facts Inscribed circle: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance (relief): 0° Hole: cylindrical Special features ISO rhombic CNMG geometry Double-sided chipbreaker Suited for external and internal turning Optimised for medium steel machining Compatible with standard ISO holders and clamping kits Suitable for continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance with toughness for productive turning. Is the insert reversible or indexable? Yes, the insert is double‑sided and indexable, allowing rotation to a fresh cutting edge to extend tool utilisation. Which holder types are compatible with this geometry? Standard ISO holders and boring bars designed for CNMG inserts will be compatible, provided form, clearance, tolerance class, fixation, size and thickness match. How does the CVD coating benefit machining? The CVD coating on the carbide substrate improves surface hardness and wear resistance, resulting in longer edge life and more consistent performance in continuous cutting. What should be checked when assembling the cutting system? Ensure the backing pad/clamp kit and replacement screws match the insert’s tolerance class and that clamping rigidity is sufficient for the intended depth of cut and material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable edge security of the CVD-coated T9215 grade deliver consistent, productive performance in medium steel turning; the rhombic 80° geometry with a 1.2 mm corner radius supports stable chip control and reduced tool changes. Order the CNMG160612 T9215 insert directly via Metav Werkzeuge or consult the team for application-specific guidance. CNMG 160612 T9215 ISO turning insert by Tungaloy — rhombic 80° geometry for medium steel The CNMG160612 T9215 Tungaloy insert is an ISO-standard rhombic indexable turning insert designed for external and internal turning tasks, offering a robust combination of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide T9215 grade Optimised for medium steel machining Double-sided chipbreaker for stable chips ISO CNMG 80° with cylindrical hole Consistent productivity through a high-performance grade The CVD-coated T9215 grade provides a controlled balance of wear resistance and fracture toughness, which translates into longer cutting edges under continuous operation and fewer unplanned tool changes. In practice, this means more consistent cycle times and improved part quality when machining medium-strength steels. The coating reduces flank and crater wear, while the carbide substrate preserves the edge under elevated mechanical loads, together supporting higher productivity without sacrificing process stability. Seamless compatibility within ISO toolholder systems As an ISO-series insert, compatibility depends on geometry, relief angle, tolerance class, fastening and thickness; the rhombic CNMG form and the presence of a cylindrical hole ensure positive seating in many standard external holders and boring bars. With a plate size of 16 mm, a thickness of 6.35 mm and an 80° cutting edge angle, the insert integrates into common tool systems when the holder specification matches these parameters. This predictable fit reduces set-up time and simplifies tool inventory management across workshops. Design features that reduce machining risk and improve chip control The double-sided chipbreaker design paired with a 1.2 mm corner radius promotes stable chip formation and helps avoid built-up edge during continuous feeds. A cylindrical hole facilitates secure clamping and repeatable repositioning, which reduces the risk of insert movement under heavy loads and improves repeatability of part geometry. These characteristics lower the incidence of machining interruptions and contribute to a smoother production flow. Practical selection and handling advice for longer life Select the chipbreaker and cutting conditions according to material, type of cut and machine stability: the T9215 grade is the first choice for medium steel where a balance of productivity and tool life is required. Using appropriate feeds, speeds and consistent coolant application extends the effective tool life, while correct torque on the clamp and verified seating prevent premature failures. Regular inspection of the cutting edge and prompt indexing of the double-sided insert keep component tolerances stable and reduce unit costs over production runs. Contact Metav Werkzeuge for availability, specification advice or to request the Tungaloy CNMG160612 T9215 insert (SKU TUN6772201) and ensure optimal selection for the intended turning application Technical data Article number: 6772201-Tungaloy Manufacturer SKU: TUN6772201 Manufacturer article number: 6772201 Facts Material: Carbide Coating: CVD Grade: T9215 ISO designation: CNMG160612 Special features Geometry: rhombic, 80° cutting edge angle Thickness: 6.35 mm Size: 16 Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Series: ISO turning inserts FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel applications; the T9215 CVD-coated carbide grade balances wear resistance and toughness for productive turning. How does the double-sided chipbreaker affect machining? A double-sided chipbreaker provides controlled chip formation on both cutting edges, improving surface finish and reducing the likelihood of clogging during continuous to slightly interrupted cuts. Which toolholders are compatible with this ISO insert? Compatibility requires matching form, relief angle, tolerance class, fastening, size and thickness; the CNMG160612 shape and the cylindrical hole fit standard ISO CNMG holders when specifications align. What are the key dimensions to check before ordering? Verify the plate size (16), thickness (6.35 mm), cutting edge angle (80°) and corner radius (1.2 mm) to ensure correct seating and performance in the chosen holder. Is the insert supplied with fixing hardware? The supplied data covers the insert; system components such as suitable holders, clamp sets and replacement screws are part of the overall tooling system and should be procured according to the machine and holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Combine the T9215 grade's high wear resistance with the stable rhombic geometry and a 1.2 mm corner radius to maintain productive turning cycles; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG 160612 T9215 CNMG turning insert, 80° rhombic, CVD‑coated by Tungaloy The CNMG 160612 T9215 is an ISO‑standard turning insert designed for external and internal turning operations, offering a balance of wear resistance and fracture toughness for medium steel machining. CVD-coated carbide grade T9215 80° rhombic insert geometry Double-sided with cylindrical hole 1.2 mm corner radius, 6.35 mm thickness Stable productivity for medium‑steel turning The CVD‑coated T9215 carbide combines high wear resistance with controlled toughness, making it particularly effective for continuous and lightly interrupted cuts on medium‑strength steels. The coating reduces flank and crater wear, which prolongs usable life under regular production conditions. For operations prioritising throughput, this grade supports extended tool life while maintaining dimensional stability, so machining cycles remain predictable and downtime is reduced. Accurate geometry that supports repeatable results The 80° rhombic geometry and 1.2 mm corner radius deliver a reliable cutting edge that balances strength and surface finish. A larger corner radius increases edge stability and helps to smooth surface irregularities, while the rhombic form provides good entry and exit angles for external and internal turning. The insert is double‑sided and features a cylindrical hole, enabling indexing to a fresh cutting edge and secure clamping in compatible holders; this design reduces tooling costs per machined part and simplifies inventory management. Straightforward integration into ISO tool systems As an ISO standard insert, the component fits established systems when paired with a suitable external holder or boring bar, plus the required backing/clamping set and replacement screws. Compatibility depends on shape, relief angle, tolerance class, fastening method, size and thickness, so toolholders must be selected to match these parameters. The 6.35 mm thickness and 16 mm inscribed circle allow robust clamping forces, which supports stable cutting conditions and reduces vibration in demanding setups. Practical guidance to extend tool life and process reliability Selecting the correct chipbreaker and matching the grade to workpiece stability are decisive steps for consistent performance. The double‑sided construction enables cost‑efficient indexing, while the CVD‑coated carbide substrate tolerates elevated cutting speeds typical of productive turning. For interrupted cuts or unstable set‑ups, consider adjusting feeds and engaging a more robust chip control geometry; for steady, continuous cuts the insert will deliver low wear rates and repeatable surface quality. Regular inspection of clamping torque and insert seating will prevent edge chipping and maintain machining accuracy. For tailored advice on machining parameters with Tungaloy’s T9215 inserts or to request stock and delivery information, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and fast processing. Technical data Article number: 6772180 Manufacturer SKU: TUN6772180 SKU: 6772180-Tungaloy ISO designation: 160612 Designation: CNMG160612 Facts Geometry angle: 80° Inscribed circle / size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Double‑sided: yes Special features Material: carbide substrate Coating: CVD coating Chipbreaker: double‑sided Hole style: cylindrical hole, with hole Plate shape: rhombic Series: ISO turning inserts Typical application: external and internal turning Suitability: continuous to lightly interrupted cuts FAQ Which materials is this insert best suited for? The CNMG 160612 T9215 insert is specified as a first choice for medium‑strength steel machining, combining wear resistance and fracture toughness for productive turning operations. What does the T9215 grade offer compared with other grades? T9215 denotes a CVD‑coated carbide grade that balances high wear resistance with robust edge strength, making it suitable for continuous to lightly interrupted cutting where consistent tool life is required. Is the insert indexable and how is it secured in the holder? Yes, the CNMG 160612 is double‑sided and indexable; it locates and is clamped via a central cylindrical hole and the matching clamping set on the chosen toolholder. Which toolholders work with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the insert requires a holder or boring bar designed for CNMG‑format ISO inserts and appropriate clamping hardware. Can this insert handle interrupted cuts or unstable set‑ups? The CNMG 160612 T9215 is intended for continuous to slightly interrupted cuts; for heavy interruptions or very unstable set‑ups a more fracture‑resistant grade or a geometry with enhanced chip control is recommended. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Benefit from high wear resistance, fracture toughness and ISO compatibility for reliable, productive turning. Order the CNMG160612 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG160612 T9215 turning insert by Tungaloy CNMG160612 T9215 is an ISO‑standard rhombic indexable insert designed for general turning operations in production environments, combining a CVD coating and a robust carbide substrate for efficient material removal. CVD-coated carbide T9215 Optimised for medium steel machining Double-sided chipbreaker for reliability ISO rhombic CNMG 16 profile Consistent cutting performance for production turning The CVD-coated carbide substrate in this insert delivers a balanced combination of wear resistance and fracture toughness, making it a dependable choice for continuous and light interrupted turning. The grade T9215 is formulated specifically for mid‑range steel machining, providing a stable cutting edge that maintains dimensional control over extended tool life. By using an ISO standard insert geometry, process parameters can be standardised across toolholders for predictable cycle times and reduced set‑up complexity. Geometry and clamping ensure repeatable accuracy The rhombic CNMG shape with a nominal size of 16 and a wedge angle of 80° provides a robust biting edge and versatile approach angles for external and internal turning. The insert includes a cylindrical hole for positive clamping and a plate thickness of 6.35 mm, ensuring stiffness in the tool assembly. Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; correct matching of holder and insert supports repeatable results and reduces vibration during cutting. Application range and machining guidance This grade is the first choice for medium steel applications and performs well in both finishing and medium roughing when appropriate feeds and speeds are applied. The double‑sided chipbreaker geometry promotes controlled chip formation, improving surface finish and reducing the risk of chip entanglement. With a corner radius of 1.2 mm, the insert balances edge strength and surface integrity; larger radii improve tool life under heavier cuts, while smaller radii assist fine finishing. Productivity, economy and handling benefits Using a graded carbide insert like this reduces downtime through fewer indexings and longer intervals between replacements, supporting higher productivity on the shop floor. The indexable insert format reduces inventory complexity compared with brazed tools and simplifies tool change procedures. Choosing a CVD‑coated, carbide insert helps to lower overall cutting costs by extending usable life and maintaining consistent tolerances across production batches. Contact Metav Werkzeuge today to discuss the Tungaloy CNMG160612 T9215 insert and receive tailored application advice or to place an order: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Manufacturer article number: 6772194 SKU: 6772194-Tungaloy Manufacturer SKU: TUN6772194 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core data ISO designation: CNMG160612 Insert size: 16 Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Wedge angle: 80° Hole: with cylindrical hole Special features Material: carbide Coating/grade: T9215 (CVD-coated carbide) Plate shape: rhombic Chipbreaker: double-sided Typical application: turning (external and internal) Suited for: medium steel machining Recommended for: continuous to light interrupted cuts System composition: ISO insert, matching external holder or boring bar, backing/clamping set and replacement screws Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning of steels. How does the chipbreaker affect machining? The double‑sided chipbreaker on this Tungaloy insert promotes controlled chip formation, improving surface finish and reducing the risk of chip control issues during turning. What dimensions and geometry are important when matching a holder? Match the holder to the insert’s form, clearance angle (0°), tolerance class, clamping method, size (CNMG 16) and thickness (6.35 mm) to ensure correct seating and stability. Is this insert suitable for interrupted cuts? Yes, the CVD‑coated carbide grade T9215 is designed for continuous to light interrupted cuts and provides a good balance between fracture resistance and wear life. How is the corner radius specified and what does it mean for cutting? The insert has a corner radius of 1.2 mm, which offers a compromise between edge strength and surface finish; it supports moderate cutting depths with improved tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a 1.2 mm corner radius for robust, long-running turning operations; the rhombic ISO geometry ensures stable clamping and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for process recommendations. CNMG 160612 T9215 Turning Insert – Tungaloy CNMG160612 T9215 is a rhombic, ISO-standard turning insert designed for medium-steel machining in general turning applications CVD-coated grade T9215 for steel machining Rhombic CNMG shape, 80° cutting angle 1.2 mm corner radius for strong edge Cylindrical-hole insert for secure clamping High productivity through wear-resistant CVD-coated carbide The CVD coating on the carbide grade T9215 combines high wear resistance with mechanical strength, which results in extended tool life and fewer indexings. For medium-steel turning, this balance reduces downtime for insert changes and supports higher metal removal rates without sacrificing process stability. The result is a measurable improvement in shop throughput and reduced total cost per part when compared with uncoated grades. Stable geometry and secure clamping for consistent surface finish Built to the ISO CNMG geometry with an 80° approach angle and a rhombic form, the insert features a cylindrical mounting hole and a plate thickness of 6.35 mm, which together provide reliable seat contact and repeatable positioning in the holder. The defined 1.2 mm corner radius enhances edge strength and helps avoid premature chipping under moderate interruptions. This combination improves vibration resistance and contributes to consistently better surface quality on shafts and bores. Application guidance and process benefits for turning operations The two-sided chipbreaker configuration and the grade’s suitability for continuous to slightly interrupted cuts make this insert a pragmatic choice for production turning and batch work. Selecting a matching holder and the correct tolerance class ensures optimal heat evacuation and chip flow. For stability-sensitive operations, pairing the insert with a robust external holder minimises runout and maximises the advantage of the grade’s breakage resistance and productivity. Contact Metav Werkzeuge for tailored advice on cutting parameters and to arrange supply of the Tungaloy CNMG160612 T9215 insert; eMail: info@metav-werkzeuge.com – Phone: +49 2822 7131930 Technical data Article number: 6774103 SKU: 6774103-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Name: CNMG160612 Facts Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Relief angle: 0° Mounting: with hole (cylindrical) Special features Rhombic CNMG geometry Double-sided chipbreaker Compatible with ISO-standard turning holders Designed for medium-steel machining Suitable for continuous to slightly interrupted cuts Stable edge for high productivity and wear resistance FAQ What materials is this insert intended for? The CNMG160612 T9215 insert is optimised for medium-steel machining and delivers a good compromise between wear resistance and breakage safety for production turning. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide provides enhanced wear resistance and mechanical durability, resulting in longer tool life and fewer indexings compared with uncoated alternatives. Is the insert compatible with standard CNMG holders? Yes, the ISO CNMG form and the cylindrical mounting hole ensure compatibility with CNMG holders that match the required form, relief angle and tolerance class. What cutting conditions suit this insert best? The grade performs well under continuous to slightly interrupted cuts; choose a matching chipbreaker and moderate feeds to exploit the insert’s productivity and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Take advantage of the high toughness and versatile performance of this ISO insert; the CVD-coated carbide grade T9225 and the 1.2 mm corner radius combine to deliver stable chip control and extended life in medium-to-heavy steel turning. Order genuine inserts via Metav Werkzeuge or consult the technical team for holder compatibility and process parameters. CNMG 160612 T9225 – Indexable turning insert (CVD carbide, 1.2 mm radius) · Tungaloy CNMG 160612 T9225 is an ISO-standard indexable insert for robust outside and inside turning in steel, engineered for interrupted cuts and varying engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for steel turning Double-sided design with cylindrical hole 1.2 mm corner radius, 80° rhombic geometry Consistent metal removal with reliable chip control The CVD-coated carbide composition of the CNMG160612 T9225 provides a balance of wear resistance and toughness that suits medium-to-heavy turning of steel. The grade is designed for slightly interrupted cuts and changing engagement conditions, so the result is stable chip formation and reduced tendency to notch wear. The 1.2 mm corner radius offers increased edge strength for longer edge life while maintaining acceptable surface finishes; this reduces the frequency of insert changes and supports a more continuous production flow. Easy integration with ISO tooling to reduce setup time As an ISO-standard indexable insert, the rhombic 80° geometry and dimensions match a wide range of standard holders. Compatibility with a holder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness, so selection is straightforward when those parameters are checked. The insert’s cylindrical hole and double-sided layout simplify clamping and inventory management; spareing the need for customised tooling reduces setup complexity and shortens downtime between jobs. Process reliability and predictable tool life for production The T9225 grade is a robust universal solution that delivers predictable tool life across varied steel grades and cutting conditions. The CVD coating improves resistance to abrasive wear and helps maintain a stable cutting edge under heavier loads, supporting consistent part quality and reduced scrap. Economically, fewer index changes and extended edge life translate into lower tooling cost per component and higher machine utilisation, reinforcing steady throughput in serial turning operations. Contact Metav Werkzeuge for application advice and to secure original Tungaloy CNMG 160612 T9225 inserts and compatible holders with rapid delivery Technical data Article number: 6781232 Manufacturer SKU: TUN6781232 Brand: Tungaloy Numbers / Core data Corner radius: 1.2 mm Thickness: 6.35 mm Size: 16 mm Included angle: 80° Clearance angle: 0° Designs / Special features CVD-coated carbide Double-sided chipbreaker Rhombic 80° geometry Cylindrical hole for clamping ISO turning insert series Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMG160612 T9225 insert is specified for steel machining and is formulated as a robust universal grade for medium-to-heavy turning operations. Can this insert handle interrupted cuts? Yes, the T9225 grade and the 1.2 mm corner radius are designed to tolerate slightly interrupted cuts and changing engagement conditions in turning. How does the insert mount to a holder? The insert uses a cylindrical hole and standard ISO dimensions; secure clamping depends on matching holder form, tolerance class, fastening method, size and thickness. Is this an indexable double-sided insert? Yes, the insert is double-sided with a chipbreaker on both faces to increase usable edge life and economic efficiency. Where can genuine inserts be obtained and who to contact for technical questions? Genuine Tungaloy CNMG160612 T9225 inserts are available through Metav Werkzeuge; for technical queries Metav Werkzeuge can advise on holder compatibility and cutting data Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and a robust rhomboid geometry for reliable medium-to-heavy steel turning and improved resistance to interrupted cuts; the ISO compatibility ensures consistent setup across holders. Order the insert directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. CNMG 160612 T9225 turning insert – CVD-coated carbide, 80° CNMG160612 T9225 Tungaloy insert is an ISO-standard rhomboid indexable turning insert engineered for medium-to-heavy steel machining, offering enhanced toughness for variable engagement and lightly interrupted cuts. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning Rhomboid shape with 80° approach angle Double-sided insert with cylindrical hole Improve process stability with a tougher grade The T9225 grade is a CVD-coated carbide formulation designed for demanding turning tasks where toughness matters. In practice this means a greater resistance to edge chipping during variable engagement or light interruptions, which directly translates into longer effective tool life and fewer unscheduled insert changes. The coating supports thermal resistance at elevated cutting temperatures typical for steel turning, while the substrate provides the ductility needed to withstand mechanical shocks. Together, these properties help maintain consistent component dimensions and reduce scrap rates in production runs. Consistent set-up and predictable compatibility for efficient workflow As an ISO-specified insert, compatibility with the clamping system is governed by form, relief angle, tolerance class, fixing method, size and thickness. This standardisation simplifies tool inventory management and ensures quick replacement in the toolholder without adjustments. The system approach—insert, suitable holder or boring bar, seat/pad and clamping screw—offers repeatable positioning and predictable cutting behaviour. Reduced setup time and consistent positional tolerance support higher uptime and make process planning and tool path validation more straightforward for workshop engineers. Geometry and chip control that support finish and productivity The rhomboid plate geometry with an 80° approach angle combines strength and access to external and internal turning operations. The double-sided chipbreaker promotes controlled chip formation across a range of feeds, assisting in swarf evacuation and protecting the cutting edge. A corner radius of 1.2 mm balances edge strength and achievable surface finish: larger radii distribute cutting forces and improve life, while still allowing fine surface quality when cutting parameters are matched. The cylindrical hole enables secure fastening and exact seating, contributing to process stability and repeatable component quality. For machining tasks that prioritise toughness and consistent performance, contact Metav Werkzeuge to source the Tungaloy CNMG160612 T9225 insert and schedule application advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 6780753 Manufacturer SKU: TUN6780753 SKU: 6780753-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG160612 T9225 Tungaloy insert Core specifications Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Approach angle: 80° Hole: cylindrical Materials & features Material: carbide Grade/coating: T9225, CVD-coated carbide Shape: rhomboid Chipbreaker: double-sided Mounting: with hole (cylindrical) Typical application: turning (external and internal) System components: ISO insert, holder/boring bar, seat/pad, clamping screw FAQ What materials is this insert suited for? The CNMG160612 T9225 insert is optimised for steel machining in medium to heavy turning operations and is particularly suitable when toughness is required for interrupted cuts. How does the T9225 grade differ from more wear-focused grades? T9225 emphasises toughness and robust edge integrity; unlike purely wear-resistant grades, it performs better under variable engagement and light interruptions, lowering the risk of edge chipping. Is the insert compatible with standard ISO toolholders? Yes, the CNMG160612 conforms to ISO geometries; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness to ensure correct seating in the holder. What advantage does the 80° approach angle provide? An 80° approach angle reduces radial cutting forces compared with a 90° face, improving stability on overhangs and allowing flexible use for external and internal turning tasks. Can the insert be turned over to use the second cutting edge? This is a double-sided indexable insert; rotating or flipping the plate allows access to additional edges, extending usable life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, universally applicable turning solution: the combination of a CVD‑coated carbide grade and an 80° rhombic geometry delivers consistent cutting performance and extended edge life for medium to heavy steel turning; order through Metav Werkzeuge or consult our specialists for process‑specific setup assistance. CNMG 160612 T9225 — ISO rhombic turning insert (Tungaloy) The CNMG160612 T9225 is an ISO‑standard rhombic turning insert designed for medium to heavy steel turning, offering a robust universal grade and a double‑sided chipbreaker for versatile machining. ISO rhombic geometry for robust turning CVD‑coated carbide grade T9225 80° angle with 1.2 mm corner radius Double‑sided chipbreaker; cylindrical hole Consistent productivity with a universal carbide grade The combination of a CVD‑coated carbide substrate and the T9225 grade is engineered for dependable performance in mixed and slightly interrupted cuts encountered in daily turning operations. This insert provides a balance between hardness and toughness, which reduces the frequency of edge failures and minimises downtime. The wear‑resistant coating protects the cutting edge under higher temperatures and improves consistent edge life, making the solution economically attractive for batch production as well as longer single‑piece runs. Geometry and design that simplify set‑up and increase uptime An 80° rhombic geometry with a 1.2 mm corner radius and a plate thickness of 6.35 mm offers stability at the cutting zone and predictable engagement with the workpiece. The double‑sided construction and the cylindrical centre hole allow reversible indexing and secure clamping in ISO‑compatible holders; compatibility depends on the holder’s form, clearance angle, tolerance class, clamping method, size and thickness. This design reduces tooling costs per cutting edge and supports rapid changeover, which helps maintain production flow and reduces non‑productive time. Coating and chip control for better surface finish and process security The CVD coating provides high resistance to abrasive wear and promotes stable chip formation, which in turn supports consistent surface quality on steel components. The integrated, double‑sided chipbreaker is suited to a wide range of cutting conditions; selecting the correct chipbreaker and match of insert sort to the workpiece material enhances process security and reduces the risk of built‑up edge. For general turning applications, this insert offers a straightforward route to improved reproducibility and fewer machine interventions. For tailored recommendations on the Tungaloy CNMG160612 T9225 insert and to ensure optimal holder compatibility and cutting parameters, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical consultation. Technical data Article number: 6780759 SKU: 6780759-Tungaloy Manufacturer SKU: TUN6780759 Facts Inscribed circle / size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Lead / included angle: 80° Clearance angle: 0° Special features CVD‑coated carbide Grade: T9225 (robust universal grade) Rhombic plate form (CNMG) Cylindrical centre hole Double‑sided chipbreaker ISO turning insert series Intended application: turning FAQ What materials is this insert suitable for? The CNMG160612 T9225 insert is formulated for medium to heavy steel turning; the T9225 grade provides toughness for slightly interrupted cuts and variable engagement conditions. Is the insert reversible and how does that affect cost per edge? Yes — the insert is double‑sided, enabling indexing of unused edges and reducing cost per cutting edge by extending the usable life of each insert. Which holders are compatible with this insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, clamping method, size and thickness; the insert follows ISO dimensions for CNMG‑type turning inserts. How does the CVD coating benefit machining performance? The CVD coating increases wear resistance at elevated temperatures, promotes stable chip formation and contributes to improved edge life and consistent surface finish in steel machining. Can this insert handle interrupted cuts or variable conditions? Yes — the T9225 grade is a robust universal choice designed to tolerate slightly interrupted cuts and changing engagement, offering a compromise between hardness and toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T9225 grade and the CNMG160612 ISO geometry delivers robust performance for mid-to-heavy steel turning; the 1.2 mm corner radius adds edge strength for interrupted cuts. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants to ensure holder compatibility and optimal cycle time. CNMG160612 T9225 indexable insert for turning – Tungaloy The CNMG160612 T9225 Tungaloy insert is an ISO-standard, rhombic indexable insert designed for external and internal turning applications, offering a robust universal grade for varying engagement conditions. CVD-coated carbide T9225 universal grade Rhombic CNMG geometry with cylindrical hole 1.2 mm corner radius for tougher cuts Double-sided insert for cost-effective edge use Engineered for sustained productivity in steel turning The combination of a CVD-coated carbide substrate and the T9225 grade provides a high degree of wear resistance while retaining enough toughness for interrupted or variable cuts. This balance reduces unexpected tool changes and helps maintain consistent cycle times on medium-to-heavy machining operations. The substrate and coating pairing is intended to slow flank wear and protect the cutting edge under fluctuating loads, which translates into longer usable edge life and predictable replacement intervals. Geometry and clamping that contribute to reliable results The ISO CNMG 160612 geometry presents a rhombic shape with an 80° included angle and a 0° clearance on the insert face, offering versatile engagement for both external and internal turning. The 1.2 mm corner radius increases edge strength and reliably withstands light interruptions, while the cylindrical hole and standard thickness of 6.35 mm ensure secure clamping in compatible holders. The double-sided nature and chipbreaker design make the insert economical per cutting edge and suitable where consistent chip control is required. Practical guidance for selection and application Designed as a universal solution, this indexable insert is suitable for a broad range of steel machining tasks; select the double-sided chipbreaker and the T9225 grade when a combination of toughness and wear resistance is needed. Match holder form, clearance angle, tolerance class and clamping method to the insert dimensions to ensure correct seating and repeatable accuracy. For operations with variable stability or intermittent cuts, the tougher grade and larger corner radius deliver greater process security and fewer interruptions to production. If further compatibility checks are required, technical data and holder recommendations can be provided. Contact Metav Werkzeuge for tailored compatibility checks and ordering advice on the Tungaloy CNMG160612 T9225 insert Technical Data Article number: 6780967 Manufacturer SKU: TUN6780967 Model series: ISO turning indexable inserts SKU: 6780967-Tungaloy Material: carbide Grade: T9225 Coating: CVD-coated Designation: CNMG160612 Application: turning Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Inscribed circle / size: 16 mm Included angle: 80° Clearance angle: 0° Special features Rhombic plate form Cylindrical hole Double-sided chipbreaker ISO-standard geometry Suitable for external and internal turning Robust universal grade for mid-to-heavy steel machining FAQ What materials is this insert best suited for? The Tungaloy CNMG160612 T9225 insert is formulated as a universal grade for steel machining, particularly mid-to-heavy applications where toughness and wear resistance are required. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and resistance to breakage, making the insert better suited for interrupted cuts and operations with variable engagement. Is the insert reversible and cost-effective per edge? Yes, the insert is double-sided, providing two usable cutting edges per side and improving cost efficiency per cutting edge. What does the CNMG160612 designation indicate? The CNMG160612 designation specifies the rhombic plate form, size (16 mm inscribed circle), thickness (6.35 mm) and ISO chipbreaker/geometry standard for turning applications. How should holders be matched to this insert? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; confirm holder specifications against the CNMG160612 dimensions to ensure secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 and the CNMG 80° rhombic geometry for reliable turning under interrupted or unstable cutting conditions; the robust 1.2 mm corner radius and double-sided chipbreaker support consistent chip control and longer tool life. Order the CNMG160612 T9235 directly via Metav Werkzeuge or contact the consultants for holder selection and process advice. CNMG160612 T9235 — Indexable turning insert, ISO-standard, for turning (Tungaloy) CNMG160612 T9235 is an ISO-standard indexable turning insert developed for external and internal turning where interrupted cuts or unstable conditions occur; the geometry and grade are optimised for steel applications. CVD-coated carbide grade T9235 For steel, low cutting speeds and interrupted cuts Rhombic CNMG 80° geometry, 1.2 mm corner radius Double-sided chipbreaker, cylindrical hole design Reliable cutting performance where stability is limited The CNMG160612 T9235 insert combines a CVD-coated surface with a tough carbide substrate to withstand impacts and fluctuating cutting forces. This ISO-standard insert is engineered for turning operations that require secure edge behaviour in stop-and-go or interrupted machining. The combination of coating and substrate reduces flank wear and helps maintain dimensional accuracy in serial and job-shop production, offering a tangible productivity advantage when feeds and speeds cannot be fully stabilised. Clear compatibility criteria and practical clamping guidance Compatibility with toolholders depends on form, clearance, tolerance class, fastening method, size and thickness; the rhombic plate format and the presence of a cylindrical hole simplify positive location in many standard CNMG holders. The insert features a 0° clearance setting and an 80° included angle, which should be matched to a holder that accepts ISO CNMG plates and secures them to prevent movement under interrupted loads. Choosing a holder with the correct seating and screw configuration ensures repeatable clamping and reduces the risk of edge chipping. Better chip control and economical cutting cycles The double-sided chipbreaker provides controlled chip formation on both indexable faces, improving evacuation in turning operations and reducing rework. With a 1.2 mm corner radius, the insert balances edge strength and surface finish, enabling more robust passes without sacrificing workpiece quality. These attributes translate into longer edge life and fewer index changes, supporting a more efficient production flow and lower tool handling times. Material focus and recommended cutting strategies This grade is specified as T9235, a CVD-coated carbide designed for steel machining at moderate to lower cutting speeds and in conditions where cuts are frequently interrupted. For roughing under unstable setups, select conservative speeds and feeds to exploit the insert's toughness; for finishing, optimise feed for the required surface quality while retaining the insert’s edge integrity. For specific holder pairings or cutting-parameter recommendations, Metav Werkzeuge can advise on matching carriers and insert orientations to achieve consistent results. For technical queries, the team is available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge to discuss the ideal holder pairing and order the Tungaloy CNMG160612 T9235 insert for stable, productive turning operations. Technical Data Article number: 6785858 Manufacturer article number: 6785858 Manufacturer SKU: TUN6785858 SKU: 6785858-Tungaloy Model series: ISO-turning indexable inserts Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Special features CVD-coated carbide grade T9235 Rhombic CNMG plate form Double-sided chipbreaker Cylindrical hole (with hole) ISO-standard turning insert suitable for external and internal turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The CNMG160612 T9235 insert is specified for machining steel; the T9235 grade is formulated to perform under lower cutting speeds and interrupted conditions common in steel turning. How is compatibility with toolholders ensured? Compatibility is determined by plate form, clearance angle, tolerance class, fastening, size and thickness; the CNMG geometry and cylindrical hole accommodate standard CNMG holders when the holder accepts ISO CNMG plates. What chip control features are provided? The double-sided chipbreaker on the CNMG160612 T9235 supports controlled chip formation on both faces, improving evacuation and reducing risk of re-cutting in turning operations. What is the corner radius and what does it mean for machining? The insert has a 1.2 mm corner radius, which offers greater edge strength for roughing and interrupted cuts while still enabling acceptable surface quality for many finishing passes. Does this insert have a hole, and what type is it? Yes, the insert is supplied with a cylindrical hole for positive location and secure clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide and a 1.2 mm corner radius for reliable performance in unstable or interrupted steel turning operations; order the insert directly via Metav Werkzeuge or request tailored cutting data from our consultants. CNMG 160612 T9235 turning insert — CVD-coated carbide, double-sided chipbreaker | Tungaloy The CNMG160612 T9235 is an ISO-standard turning insert engineered for both external and internal turning, offering a tough, CVD-coated carbide grade for interrupted cuts and unstable machining conditions. ISO-standard CNMG geometry CVD-coated carbide grade T9235 Tough grade for unstable and interrupted cuts Double-sided chipbreaker with cylindrical hole Proven toughness for interrupted and unstable turning The indexable insert combines a CVD-coated surface with a tough carbide substrate to provide controlled wear under demanding conditions. This composition makes the insert especially suited to machining steel where cutting speeds are moderate and the cut is interrupted or unstable. The T9235 grade is formulated to resist chipping and maintain cutting edge integrity, which translates into steadier component quality and reduced tool-change frequency. The combination of coating and substrate also supports predictable tool-life behaviour, aiding process planning in production environments. Precise geometry for dependable clamping and repeatability Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness, all conforming to ISO standards. With an inscribed size of 16 mm, a thickness of 6.35 mm and a corner radius of 1.2 mm, the insert provides consistent seating and repeatable positioning in commercial CNMG-compatible holders. The 0° clearance angle and 80° included angle help define the effective engagement and cutting forces, so correct holder selection and secure clamping yield stable cutting conditions and reproducible surface finish without guesswork. Chip control and edge utilisation to boost productivity The double-sided chipbreaker design, combined with a cylindrical hole for positive location, supports controlled chip formation and evacuation even under irregular cut interruptions. Good chip control reduces rework and risk of built-up edge, improving cycle reliability on both external and internal features. The rhombic insert form and indexable nature enable multiple edge uses per insert, lowering per-part tooling cost and simplifying inventory management in the workshop. Practical selection and application guidance For best results, pair the insert with a matching external holder or boring bar, and choose the chipbreaker style and grade according to workpiece material, machining method and machine stability. The ISO-series system architecture—insert, holder, shim/clamp set and replacement screws—ensures each component is specified for a coherent setup. In marginally stable setups the T9235 grade is recommended at reduced cutting speeds to preserve edge life; in steady, high-speed scenarios a different grade may be preferable to increase metal removal rate. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on the Tungaloy CNMG160612 T9235 turning insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785822 Manufacturer SKU: TUN6785822 SKU: 6785822-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Shape: rhombic Core figures Inscribed size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 80° Materials & special features Material: carbide Grade: T9235 (CVD-coated) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Series designation: CNMG160612 FAQ What makes this insert suitable for interrupted cuts? The CVD-coated T9235 grade and tough carbide substrate provide resistance to chipping and edge fracture, making the CNMG160612 T9235 insert appropriate for interrupted and unstable cutting conditions. Which holders are compatible with this CNMG geometry? Compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness; when these parameters align, standard CNMG holders and boring bars accept the CNMG160612 insert. What are the key dimensions to check before ordering? Check the inscribed size (16 mm), thickness (6.35 mm) and corner radius (1.2 mm); these determine seating, corner engagement and the achievable contour radius in turning operations. Does the double-sided chipbreaker improve chip control? Yes, the double-sided chipbreaker combined with the cylindrical locating hole encourages stable chip formation and evacuation, supporting cleaner cuts and less risk of built-up edge. Is this insert suitable for stainless or special alloys? The CNMG160612 T9235 insert is a tough grade optimised for steel and interrupted cuts; for stainless steel or advanced alloys, consult application data to confirm the ideal grade and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com