CNMG 160612 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a robust cutting edge and double-sided geometry for consistent turning under unstable conditions. Order the CNMG160612 T9235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 160612 T9235 turning indexable insert — CVD-coated carbide, double-sided, Tungaloy CNMG160612 T9235 is a rhombic ISO-indexable insert designed for general turning applications where toughness and reliable chip control are required CVD-coated carbide T9235 for toughness Double-sided geometry for economical indexing ISO rhombic CNMG form for holder compatibility Cylindrical hole and 1.2 mm corner radius Reliable cutting performance for interrupted and unstable turning The CNMG160612 T9235 insert delivers consistent cutting performance thanks to its CVD-coated carbide substrate and a geometry tuned for interrupted cuts. The double-sided construction provides two usable edges per seat, reducing downtime and improving cost efficiency in batch production. The grade T9235 is formulated to remain tough at lower cutting speeds and in less stable setups, which helps to preserve the cutting edge where chatter or interruptions occur. The rhombic CNMG form and standard 80° lead angle ensure predictable engagement with the workpiece and familiar behaviour in most ISO holders. Easier setup and predictable chip control in everyday turning Compatibility with the toolholder is defined by form, relief angle, tolerance class, fixing method, size and thickness; this insert matches common CNMG holders thanks to its ISO geometry and cylindrical hole. The double-sided chipbreaker supports repeatable chip control, lowering the risk of built-up edge and facilitating smoother material evacuation. For applications in Stahl, choose feed and speeds that reflect the tougher T9235 behaviour — optimised for lower cutting speeds. If additional machining data or holder recommendations are required, technical advice is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Durable grade and economic advantages for standard turning tasks Manufactured from high-quality carbide and finished with a robust CVD layer, the insert offers a balance of edge strength and wear resistance that supports longer tool life under demanding turning conditions. The 1.2 mm corner radius helps distribute cutting forces, improving edge stability and surface finish in roughing and finishing passes. By combining replaceable insert economics with a proven ISO form, the solution reduces overall tooling expenditure and simplifies inventory management. Trust in the engineered consistency of the grade for repeatable results on production runs. Choose the Tungaloy CVD-coated CNMG160612 insert for demanding turning operations and contact Metav Werkzeuge for ordering and bespoke technical guidance Technical data Article number: 6785813 SKU: 6785813-Tungaloy Manufacturer SKU: TUN6785813 Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Lead/approach angle: 80° Relief angle: 0° Special features Material: carbide Coating/grade: T9235 (CVD-coated) Shape: rhombic (CNMG) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning ISO designation: CNMG160612 Suitable for: Stahl; optimised for unstable or interrupted cuts FAQ What materials is this insert designed to machine? The CNMG160612 T9235 insert is optimised for machining Stahl, offering toughness and edge stability for interrupted or less stable turning operations. Is the insert reversible and economical? Yes, the double-sided CNMG geometry provides two usable edges per seat, enabling economical index changes and reduced tool change frequency with the CNMG160612 T9235. How does the T9235 grade behave in practical cutting? T9235 is a CVD-coated, tough carbide grade formulated to perform well at lower cutting speeds and under interrupted cutting conditions, prioritising edge resilience over maximum speed. Which holder features must be matched for correct fitment? Compatibility is determined by the ISO form, relief (frewinkel) angle, tolerance class, fixing method, size and thickness; use a standard CNMG-compatible holder to ensure correct clamping and alignment. Does the insert include special chip control features? The double-sided chipbreaker is designed for predictable chip formation and evacuation, improving surface finish and reducing built-up edge during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD‑coated carbide grade T9235, a CNMG 80° rhombic geometry and a double‑sided chipbreaker for reliable external and internal turning of steel under unstable or interrupted‑cut conditions; order or request application advice via Metav Werkzeuge. CNMG160612 T9235 turning insert — CVD‑coated carbide, 80° rhombic | Tungaloy The CNMG160612 T9235 is an ISO rhombic turning insert designed for external and internal turning of steel, offering a tough, CVD‑coated carbide grade for interrupted cuts and less stable machining conditions. CVD‑coated carbide grade T9235 Rhombic 80° geometry for versatile turning Double‑sided chipbreaker for consistent chips 1.2 mm nose radius for balance of strength and finish Consistent performance with a tough CVD coating The combination of a CVD‑coating and a tough carbide substrate (grade T9235) delivers improved wear resistance and thermal stability compared with uncoated grades. In practice this means extended tool life and more predictable change intervals when machining steel at lower cutting speeds or with interrupted cuts. CVD coatings form a hard, thin layer that reduces flank wear and provides a thermal barrier; the result is a more stable process and fewer unplanned tool changes, which supports continuous production and cost efficiency. Geometry engineered for stability and surface quality The insert’s 80° included angle and rhombic shape make it suitable for a wide range of turning profiles, while the 1.2 mm nose radius balances cutting edge strength and surface finish. The double‑sided chipbreaker supplies repeatable chip control for many roughing and finishing passes, and the cylindrical hole allows secure screw clamping in compatible ISO toolholders. A 0° clearance specification increases edge strength where robustness is required rather than aggressive tool relief, so the component performs well in interrupted cuts and when machine stability is limited. ISO compatibility and system considerations for predictable results As an ISO‑standardised insert, compatibility with the toolholder depends on form, clearance angle, tolerance class, mounting method, size and thickness. The insert integrates into standard systems comprising an appropriate external holder or boring bar, a support/locking set and spare screws. Selecting the correct holder and clamping set is decisive for process reliability: a matching toolholder ensures correct seating, repeatable clamping and optimal heat dissipation, all of which contribute to more consistent surface quality and longer edge life. Practical selection and application advice for turning steel Choose the chipbreaker and grade to match the workpiece material, machining stability and type of cut; the T9235 grade is intended for steel applications at lower cutting speeds and for interrupted or unstable cutting situations. Properly paired with a suitable holder and clamping, the insert provides improved chip control and steadier cutting forces, reducing the risk of edge chipping and downtime. For specific machining strategies or to clarify holder compatibility, technical consultation is available to help define the best combination for a given component and machine setup. Contact Metav Werkzeuge for application recommendations or to check availability of the CNMG160612 T9235 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785869 Manufacturer SKU: TUN6785869 Our SKU: 6785869-Tungaloy Model series: ISO turning inserts Designation: CNMG160612 Manufacturer article number: 6785869 Core specifications Nose radius: 1.2 mm Insert size: 16 mm Thickness: 6.35 mm Included angle: 80° Clearance angle: 0° Features & suitability Material: carbide Coating/sort: CVD‑coated, grade T9235 Shape: rhombic (CNMG) Chipbreaker: double‑sided Hole: cylindrical hole, with hole Typical application: external and internal turning Suited to steel, interrupted cuts and unstable conditions FAQ What materials is this insert suitable for? The CNMG160612 T9235 insert is specified for machining steel and is particularly suited to interrupted cuts and less stable machining conditions thanks to its tough CVD‑coated carbide grade. How does the 1.2 mm nose radius affect machining results? A 1.2 mm nose radius provides a compromise between edge strength and surface finish; larger radii increase strength and allow heavier cuts, while smaller radii improve the ability to produce finer surface finishes. Is the insert reversible or indexable? The insert is double‑sided, offering two effective cutting edges per index position; this maximises usable edges before replacement and supports economical usage. What should be considered for clamping and holder selection? Compatibility depends on form, clearance angle, tolerance class, mounting method, size and thickness; correct seating and screw clamping in a suitable ISO toolholder are essential for repeatable performance. Can this insert be used for internal turning (boring)? Yes — the rhombic geometry and the CNMG form allow use in both external and internal turning operations, provided a compatible holder or boring bar is used and appropriate cutting parameters are selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160616 AH120 Wendeplatten - Tungaloy
Reliable machining and enhanced process security result from the combination of the PVD-coated AH120 carbide grade and the 80° rhombic geometry with a 1.6 mm corner radius; the insert is designed for consistent chip control and long tool life in turning applications. Order the insert directly via Metav Werkzeuge or consult the team for application advice and selection support. CNMG160616 AH120 indexable insert for turning — Tungaloy, PVD-coated carbide, 80° rhombic The CNMG160616 AH120 is an ISO-indexable insert for external and internal turning, engineered to deliver a sharp cutting edge and high process reliability in industrial turning operations. ISO rhombic insert 80° geometry PVD-coated carbide AH120 grade Double-sided chipbreaker, with hole 1.6 mm corner radius, 6.35 mm thick Consistent performance through a wear-resistant grade The insert’s AH120 grade is a PVD-coated carbide designed for wear and breakage resistance in turning operations. With a sharp cutting edge and a robust coating, the grade provides extended tool life and reduced variation in part quality. This translates into fewer tool changes, lower unproductive time and more predictable cycle times, so production runs remain stable even under demanding conditions. The result is improved component finish and reproducible results across repeated batches. Seamless integration into ISO tooling systems As an ISO-design insert, compatibility is determined by shape, clearance angle, tolerance class, fastening, size and thickness, and the module is intended to be used with a suitable external holder or boring bar, along with a shim/clamp set and replacement screws. The insert’s 6.35 mm thickness and 16 mm plate size fit common clamping systems for 80° rhombic tooling, enabling straightforward replacement and assembly. Correct holder selection and secure clamping are essential for achieving the expected stability and repeatability during turning operations. Improved productivity with controlled chip formation The double-sided chipbreaker and the presence of a cylindrical hole support reliable chip formation and evacuation when paired with the correct chipbreaker geometry for the workpiece material. The 1.6 mm corner radius and 80° geometry strike a balance between edge strength and the ability to produce a fine profile, making the insert suitable where process security and surface quality are priorities. Properly matched, these features lower the risk of built-up edge and reduce the likelihood of unexpected insert failure, contributing to a more productive machining process. Application range and practical handling advice Designed for external and internal turning, the insert performs best when the chipbreaker and grade selection are aligned with the selected workpiece material and the intended operation (roughing or finishing). Installation should follow the system’s specified clamping torque and tolerances to preserve geometry and avoid stress on the cutting edge. Spare screws, a suitable shim or clamp and the correct holder geometry are part of the complete system setup and should be checked before each tool change to ensure consistent outcomes. Contact Metav Werkzeuge for tailored application advice or to order Tungaloy CNMG160616 AH120 inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6811653 Manufacturer SKU: TUN6811653 SKU: 6811653-Tungaloy Brand: Tungaloy Designation: CNMG160616 AH120 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Thickness: 6.35 mm Plate size: 16 mm Included angle: 80° Relief angle: 0° Special features Material: carbide Coating/grade: PVD-coated AH120 Chipbreaker: double-sided Shape: rhombic Hole: with cylindrical hole Suitable for: turning (external and internal) System components: compatible holder, shim/clamp set and replacement screws FAQ What machining tasks is this insert designed for? This insert is intended for external and internal turning; the CNMG160616 AH120 insert is optimised for operations where a sharp cutting edge and process stability are required. Can the insert be indexed to use both cutting edges? Yes, the insert is double-sided and designed for indexing to make efficient use of both cutting edges before replacement. How is compatibility with holders determined? Compatibility is ensured by matching the insert’s shape, relief angle, tolerance class, fastening method, size and thickness to the chosen holder; the CNMG160616 designation follows ISO standards for straightforward selection. Which features help with chip control? The double-sided chipbreaker and cylindrical hole support controlled chip formation; combined with the 1.6 mm corner radius and appropriate grade selection, they improve evacuation and reduce chatter. Is the AH120 grade coated and what benefit does that provide? The AH120 grade is PVD-coated, offering enhanced wear resistance and edge stability for more reliable turning performance with consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 AH6225 Wendeplatten - Tungaloy
Benefit from a cost-effective, robust cutting solution that combines PVD-coated carbide performance with straightforward ISO compatibility for reliable turning operations; order the CNMG160616 AH6225 insert via Metav Werkzeuge or request technical advice from the consultants. CNMG 160616 AH6225 indexable turning insert (CNMG) by Tungaloy — PVD-coated carbide, 80° included angle A CNMG160616 AH6225 indexable turning insert for external and internal turning, optimised for mid-range machining of stainless steels and variable operating conditions PVD-coated carbide grade AH6225 ISO rhombic CNMG form, 80° included angle Suitable for stainless steel turning Double-sided insert with cylindrical hole Consistent cutting performance for stainless steels The AH6225 grade is a PVD-coated carbide developed as a universal option for machining stainless steels, delivering a sharp yet stable cutting edge for medium-duty operations. Its chemistry and coating combination prioritise durable edge integrity and improved wear resistance, which supports consistent surface finish and predictable tool life. Where machining conditions vary, the grade helps maintain process stability and reduces unexpected tool changes, contributing to lower overall operating costs. System compatibility and practical dimensions for easy integration Designed to the ISO CNMG specification, the rhombic geometry and 80° included angle ensure compatibility with a wide range of external holders and boring bars. Key dimensions — 16 mm size, 6.35 mm thickness, and a 1.6 mm corner radius — define the insert’s engagement and influence achievable radii and surface quality. The insert is double-sided and features a cylindrical hole for positive location and secure clamping; compatibility with holders depends on form, relief angle, tolerance class, fastening and thickness, allowing a predictable fit within standard turning systems. Operational advantages and recommended uses Intended for both external and internal turning, the insert’s double-sided design and stable chip formation support efficient tool costs per cutting edge while maintaining productivity. The built-in chipbreaker and the choice of grade make it suitable where mixed materials and variable stability occur on the machine. Typical benefits include reduced downtime for insert changes, improved repeatability in batch production and a balanced compromise between edge sharpness and wear resistance that is particularly useful for medium cutting depths and interrupted cuts. Contact Metav Werkzeuge for a tailored technical consultation or to arrange supply of the CNMG160616 AH6225 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903173 Manufacturer SKU: TUN6903173 SKU: 6903173-Tungaloy Model series: ISO-Drehwendeschneidplatten Description: CNMG160616 AH6225 Tungaloy indexable insert Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Grade: AH6225 Design & special features Material: carbide Coating: PVD Shape: rhombic (CNMG) Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Typical system: insert + external holder or boring bar + shim/clamp set + spare screws FAQ What materials is this insert best suited for? The CNMG160616 AH6225 insert is formulated for machining stainless steels and performs well in medium-duty turning operations where a balance of edge sharpness and wear resistance is required. How is the insert secured in the holder? The insert uses a cylindrical hole and is intended for positive clamping in compatible ISO CNMG holders; secure fastening depends on holder form, tolerance class and clamp design. Can the same insert be used for external and internal turning? Yes, the insert’s CNMG geometry and double-sided design allow use in both external turning inserts and appropriate boring-bar setups for internal turning. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide promotes stable chip formation and a robust cutting edge, which together improve predictability of tool life under varying machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade, 1.6 mm corner radius and proven 80° rhombic geometry to maintain stable cutting performance in turning operations; order the CNMG160616 AH6225 Tungaloy insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG 160616 AH6225 – Indexable turning insert, PVD-coated, for turning (Tungaloy) CNMG160616 AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for rostfreier Stahl and general turning tasks PVD-coated cemented carbide AH6225 Optimised for rostfreier Stahl turning 80° rhombic geometry with 1.6 mm radius Double-sided chipbreaker, cylindrical hole Reliable performance for rostfreier Stahl and mixed conditions The CNMG160616 AH6225 insert combines a PVD coating with a tough cemented carbide substrate to deliver consistent cutting under variable conditions. The AH6225 grade is engineered as a universal option for processing rostfreier Stahl, offering a balance between edge sharpness and wear resistance. This translates into fewer tool changes and more predictable cycle times in batch production. Explaining briefly: the PVD layer reduces friction and adhesion tendencies while the carbide core sustains the cutting edge at moderate cutting speeds, resulting in improved process stability. Stable cutting edge and controlled chip formation A sharp but resilient cutting edge is central to achieving good surface finish and repeatable tool life. The insert’s double-sided chipbreaker promotes controlled chip segmentation for a wide range of feeds, reducing the risk of built-up edge on difficult-to-machine alloys. The 1.6 mm corner radius supports feed robustness and distributes cutting forces across a larger area, lowering the incidence of premature chipping. As a result, component quality becomes more consistent and post-process rework is minimised, which benefits both small-series and high-volume production. Designed for fast integration and low setup time Compatibility with standard ISO holders is determined by geometry, relief angle and thickness; this insert’s 80° geometry, cylindrical hole and 6.35 mm thickness make it straightforward to mount in commonly used external holders and boring bars. The rhombic shape allows for multiple indexing positions, extending service life per insert and reducing inventory turnover. Clear mechanical fit and standardised dimensions support quick changeovers and minimise machine downtime, thereby improving overall shop-floor productivity. For precise turning of rostfreier Stahl with Tungaloy grade AH6225, contact Metav Werkzeuge for stock availability and application recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903182 Manufacturer SKU: TUN6903182 SKU: 6903182-Tungaloy Name: CNMG160616 AH6225 Tungaloy insert Facts Corner radius: 1.6 mm Insert size: 16 mm Thickness: 6.35 mm Approach angle: 80° Relief angle: 0° Special features PVD-coated cemented carbide Grade AH6225, universal for rostfreier Stahl Rhombic 80° insert shape Double-sided chipbreaker Cylindrical hole, with hole ISO CNMG160616 designation Suitable for external and internal turning Compatibility via form, relief angle, tolerance and thickness FAQ What materials is this insert best suited for? The CNMG160616 AH6225 insert is optimised for rostfreier Stahl and performs well across a broad range of steels and mixed materials when the correct chipbreaker and machining parameters are selected. How does the AH6225 grade improve tool life? AH6225 combines a PVD coating with a durable cemented carbide substrate to reduce adhesion and wear, delivering a stable cutting edge and longer service intervals under varying turning conditions. Can the insert be indexed to use multiple cutting edges? Yes, the rhombic geometry and double‑sided design allow multiple indexings, which extends the usable life per insert and reduces tooling costs per part. Is this insert compatible with standard ISO CNMG holders? The insert follows the ISO CNMG160616 designation and is compatible with holders that match the form, relief angle, tolerance class, fastening and thickness specifications. What are the benefits of the cylindrical hole and 6.35 mm thickness? The cylindrical hole and 6.35 mm thickness provide secure clamping and robust support in the pocket, improving stability during interrupted cuts and heavy roughing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 AH6235 Wendeplatten - Tungaloy
The combination of a PVD-coated, tough AH6235 grade and the proven CNMG 160616 geometry ensures stable cutting in stainless steel and interrupted cuts; take advantage of improved edge security and straightforward ISO compatibility. Order the insert through Metav Werkzeuge or request application advice from the consultants for reliable process integration. CNMG 160616 AH6235 – ISO turning insert (rhombic, 80°) by Tungaloy CNMG 160616 AH6235 is an ISO-standard indexable insert designed for precision external and internal turning, optimised for stainless steels and interrupted cutting conditions. PVD-coated carbide AH6235 for tough materials 80° rhombic geometry for stable cutting Double-sided chipbreaker for versatile machining Cylindrical hole and 6.35 mm thickness for secure clamping Enhanced performance for stainless steel and demanding cuts The AH6235 grade is a PVD-coated cemented carbide designed to combine toughness with wear resistance, making it well suited to stainless steel and operations prone to chipping. The harder-coated surface gives improved flank and crater wear resistance, while the substrate toughness helps to absorb shocks during interrupted cuts. This mix of properties translates into fewer edge failures and more predictable tool life, which supports consistent cycle times and reduced scrap rates in production environments. Secure clamping and geometric advantages for process stability The 80° rhombic geometry with a 1.6 mm corner radius and 6.35 mm plate thickness provides a stable cutting configuration that resists deflection under radial loads. The insert’s cylindrical hole and standard ISO form allow compatibility with a wide range of external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, mounting and size. The double-sided chipbreaker offers economical indexing and dependable chip control across a range of feed rates, supporting both finishing and medium-turning operations. Reduced downtime through robust edge control and predictable behaviour Thanks to the AH6235 substrate and PVD finish, the insert exhibits improved resistance to notch wear and thermal softening in the contact zone. The enhanced mechanical integrity reduces unexpected edge breakouts during transient conditions, leading to fewer unplanned tool changes. For workshops seeking a balance between edge life and fracture resistance, this insert provides a pragmatic route to higher uptime and more stable surface finishes without complex process tunes. System-level thinking for reliable integration These ISO indexable plates are best used as part of a complete system: the insert, a matched external holder or boring bar, a suitable backing/clamping kit and replacement screws. Selecting the appropriate chipbreaker and grade according to workpiece material and cutting parameters ensures repeatable results. For mixed batches or interrupted surfaces, the tougher grade reduces the need for frequent tool trials, enabling faster production start-ups and consistent part quality. For reliable high-performance turning with Tungaloy AH6235 inserts, contact Metav Werkzeuge for application recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903361 Manufacturer SKU: TUN6903361 Model series: ISO turning indexable inserts Material: cemented carbide (PVD-coated) Core specifications ISO designation: CNMG160616 / 160616 Corner radius: 1.6 mm Insert size: 16 mm Plate thickness: 6.35 mm Clearance angle: 0° Lead/approach angle: 80° Features Grade: AH6235 (tough PVD-coated carbide) Shape: rhombic (80°) Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning, interrupted cuts Compatibility: ISO-standard holders and boring bars FAQ Is this insert suitable for stainless steel machining? The AH6235 grade was developed for tougher applications and is suitable for stainless steel work, offering improved resistance to chipping and notch wear during interrupted cuts. Can the CNMG 160616 be used for both external and internal turning? Yes, the ISO‑standard CNMG 160616 geometry is intended for both external and internal turning when paired with a compatible holder or boring bar. How does the PVD coating affect tool life? The PVD coating on the AH6235 grade increases surface hardness and reduces adhesive wear, which enhances flank and crater resistance and contributes to more consistent tool life in demanding conditions. What is the benefit of the double-sided chipbreaker? A double-sided chipbreaker allows economical indexing and provides reliable chip control across different feeds, which simplifies inventory and increases uptime. Which holder characteristics must be checked for compatibility? Compatibility depends on form, clearance angle, tolerance class, mounting arrangement, size and thickness; ensure the holder matches the ISO CNMG form and the insert’s dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 AH905 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, PVD‑coated cemented‑carbide grade combined with an ISO‑compatible rhombic geometry for reliable turning performance and reduced tool changes; order directly via Metav Werkzeuge or request application advice from our consultants. CNMG 160616 AH905 – Turning insert by Tungaloy (PVD‑coated, rhombic, 80°) CNMG 160616 AH905 is an ISO‑standard rhombic turning insert intended for external and internal turning operations, offering a sharp cutting edge and high process security with PVD‑coated cemented carbide. ISO 160616 rhombic turning insert PVD-coated cemented carbide grade AH905 80° lead angle, 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole Durable, PVD‑coated carbide for stable production The PVD coating on this cemented‑carbide grade delivers a balanced combination of wear resistance and edge integrity that suits demanding turning operations. By limiting flank and crater wear, the coating extends the usable life of the cutting edge while maintaining a sharp cutting geometry for predictable surface finish. The selected carbide matrix supports thermal stability and toughness, which reduces the risk of premature edge failure under interrupted cuts. These technical properties translate into fewer tool changes and more consistent cycle times on both batch and continuous production. Precision geometry that fits ISO tool systems The rhombic shape with an 80° lead angle and a 1.6 mm corner radius provides a versatile geometry for general turning tasks where a defined cutting line and strength at the corner are required. The insert thickness of 6.35 mm and the ISO designation 160616 ensure compatibility with standard ISO holders; the insert is supplied with a cylindrical hole for secure clamping and correct axial location. The double‑sided design permits indexable use, doubling the number of effective cutting edges per insert and improving cost efficiency per cutting edge. Specified tolerances for form, relief and fixing must be considered when pairing the insert with a holder to guarantee repeatable clamping and performance. Chip control and process security for reliable turning A double-sided chipbreaker optimises chip formation for a broad range of cutting parameters and workpiece materials commonly encountered in turning. The AH905 grade is described as wear‑ and chipping‑resistant, making it particularly suitable where a sharp edge and high process security are required—for example, finishing and medium‑duty roughing in steels and similar materials. Stable chip control reduces rework and downtime and improves operator safety. For best results, match feed rates and depth of cut to the insert geometry and choose the holder rigidity to suit the intended operation; correct coolant application will further enhance edge life and surface quality. For application matching and to request a quotation for the CNMG 160616 AH905 turning insert by Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical advice and supply options. Technical data Article number: 6859523 Manufacturer SKU: TUN6859523 Model series: ISO turning inserts Core data Insert designation: 160616 Corner radius: 1.6 mm Thickness: 6.35 mm Insert size: 16 Lead angle: 80° Rake/relief angle: 0° Special features Rhombic plate shape Double-sided chipbreaker Cylindrical hole for secure clamping PVD-coated cemented carbide, grade AH905 Intended application: turning ISO‑standard compatibility; use with matching holder, shim and clamping screws FAQ What materials is this insert suitable for? The CNMG 160616 AH905 turning insert, with its PVD‑coated cemented‑carbide grade, is designed for general turning applications and performs well in a wide range of common steels and similar materials where a sharp edge and process security are required. Can the insert be indexed and reused? Yes, the insert is double‑sided and indexable; the CNMG geometry allows multiple edges to be used by repositioning the plate, which improves cost efficiency per edge. How does the corner radius affect cut quality? A 1.6 mm corner radius increases edge strength and supports better surface finish in semi‑finishing and finishing operations, offering a compromise between robustness and the required cutting force. Is the CNMG 160616 compatible with standard ISO holders? The insert carries the ISO designation 160616 and is intended for use with ISO‑compatible holders that match the plate form, size, thickness and hole style; correct holder selection ensures repeatable clamping and tool performance. What benefits does the AH905 grade provide in turning? The AH905 PVD‑coated grade delivers wear‑resistance and resistance to chipping, combining a sharp initial edge with reliable life under variable cutting conditions, which supports consistent productivity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160616 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5115 and the rhombic 80° geometry for reliable, repeatable turning of cast iron; the double-sided chipbreaker and cylindrical hole ensure secure clamping and straightforward indexability. Order originals or consult Metav Werkzeuge for application-specific advice and availability. CNMG 160616 T5115 — Tungaloy turning insert (turning) CNMG160616 T5115 is an ISO-format indexable insert for general external and internal turning, engineered for stable chip formation and durable edge life in cast iron applications CVD-coated carbide grade T5115 Rhombic 80° geometry for general turning Double-sided chipbreaker for chip control Corner radius 1.6 mm, thickness 6.35 mm Consistent edge performance for cast iron machining The CVD-coated carbide grade delivers a balanced combination of wear resistance and edge stability, specifically formulated for cast iron. The coating improves resistance to built-up edge and abrasive wear, which means more consistent component dimensions and longer indexed life between tool changes. For workshops requiring reliable productivity, this engineered grade reduces the frequency of insert changes while maintaining surface integrity on turned parts. Secure clamping and straightforward indexability The rhombic 80° shape with a cylindrical hole and a 0° clearance angle permits secure fastening in standard holders and boring bars; compatibility depends on holder form, tolerance class, fastening style, size and thickness. The insert is double-sided, enabling economical use of available cutting edges and rapid indexing. The corner radius 1.6 mm provides a compromise between strength and surface finish, while the 6.35 mm thickness contributes to stable mounting under intermittent or heavy cuts. Effective chip control for stable process results The integrated chipbreaker geometry promotes predictable chip formation and evacuation, which supports higher material removal rates and steadier cutting forces. With suitable selection of chipbreaker and grade, the system helps to reduce machine downtime and improves repeatability across serial production. The ISO-format design ensures interchangeability within the ISO turning indexable insert family, simplifying tool inventory and replacement logistics. Practical system setup and application guidance The complete cutting system comprises the insert together with a matching external holder or boring bar, shim/locking set and replacement screws. Choose the chipbreaker and grade to match workpiece material, machining operation and machine-tool rigidity. The insert is intended for both external and internal turning; for best results in cast iron, pair the grade with stable clamping and consistent cutting parameters. Metav Werkzeuge can advise on holder compatibility and recommended cutting data. Contact Metav Werkzeuge for tailored advice on integrating this Tungaloy CVD-coated insert into existing turning setups and to confirm current stock and delivery options Technical data Article number: 6852903 SKU: 6852903-Tungaloy Manufacturer SKU: TUN6852903 Model series: ISO turning indexable inserts Material: carbide Key dimensions Size: 16 mm Thickness: 6.35 mm ISO code: 160616 Corner radius: 1.6 mm Clearance angle: 0° Included hole: with cylindrical hole Principal angle: 80° Features Grade: T5115 (CVD-coated carbide) Shape: rhombic Chipbreaker: double-sided Intended use: turning (external and internal) Compatibility: determined by form, clearance, tolerance class, fastening, size and thickness System composition: insert, external holder or boring bar, shim/locking set and spare screws FAQ What workpiece materials is this insert best suited for? The CNMG160616 T5115 insert is formulated primarily for cast iron applications; the T5115 grade balances wear resistance and edge stability to deliver consistent results in grey and nodular cast iron. How does the chipbreaker affect performance? The double-sided chipbreaker on this indexable insert improves chip control and evacuation, which reduces vibration and supports steadier cutting forces during turning operations. Which toolholders are compatible with this ISO-format insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; holders and boring bars designed for ISO CNMG 160616 geometry accept this insert when those parameters match. Is the insert reversible or indexable? The insert is double-sided and indexable, allowing rotation to fresh edges; this supports economical use of available cutting edges and short changeover times. What are the key dimensional values to check before fitting? Verify the insert size (16 mm), thickness (6.35 mm), corner radius (1.6 mm), bore style (cylindrical hole) and the 80° rhombic geometry to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise 1.6 mm corner radius and ISO‑standard compatibility for productive turning of cast iron. Order the CNMG160616 T5115 insert directly via Metav Werkzeuge or consult our technical advisors for selection and availability. CNMG 160616 T5115 turning insert – Tungaloy, CVD‑coated carbide, 80° CNMG160616 T5115 Tungaloy insert for ISO‑standard turning applications, optimised for cast iron machining with stable cutting edges and reliable chip control CVD-coated carbide grade T5115 Universal for cast iron ISO-standard rhombic CNMG form Double-sided chipbreaker Cylindrical hole, 80° cutting angle Durable grade for consistent productivity The T5115 grade combines a CVD‑coated carbide substrate with a formulation that balances wear resistance and edge stability, making it suitable for repetitive turning operations on cast iron. The coating reduces flank wear under sustained cutting, which translates into longer tool life and fewer insert changes. For production environments where cycle time and predictable tool life matter, this grade supports a steady process with reduced unscheduled interruptions. Precise geometry for reliable fit and performance The rhombic CNMG form is ISO‑standard, ensuring straightforward compatibility with a wide range of external holders and boring bars when matched for form, thickness and clamping. The 1.6 mm corner radius and 6.35 mm thickness contribute to a robust edge capable of absorbing moderate cutting forces, while the 80° cutting angle and 0° relief provide a versatile cutting geometry that is effective for both external and internal turning tasks. Correct holder selection is essential for optimum results. Controlled chips and improved surface finish Equipped with a double-sided chipbreaker, the insert promotes effective chip segmentation and evacuation, which benefits surface integrity and machine uptime. The cylindrical hole allows secure clamping in standard ISO fixtures, preserving positional accuracy and repeatability. Together, these features reduce recutting of chips and help maintain a consistent workpiece finish even under varying material batches and cutting conditions. Application advice and system considerations This insert is intended primarily for turning of cast iron; its universal character allows flexibility across similar grey and ductile cast iron grades. Integration into a machining system requires attention to holder geometry, clamping torque and stable workholding to exploit the T5115 advantages. Selection of feed and speed should reflect the chipbreaker style and the specific cast iron grade to balance tool life and productivity. For supply and tailored advice on Tungaloy CNMG160616 T5115 inserts, contact Metav Werkzeuge for availability and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6850164 Manufacturer SKU: TUN6850164 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Thickness: 6.35 mm Size: 16 mm Cutting angle: 80° Relief angle: 0° Special features Material: carbide Coating: CVD Grade: T5115 Shape: rhombic (CNMG) Chipbreaker: double-sided Hole style: cylindrical Application: turning ISO-standard insert FAQ What materials is this insert intended for? This insert is designed primarily for machining cast iron; the T5115 grade offers a balanced combination of wear resistance and edge stability for those materials. Is the CNMG form compatible with standard holders? Yes; the rhombic CNMG geometry conforms to ISO standards and fits compatible external toolholders and boring bars when matched for size and clamping arrangement. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert helps to control chip shape and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning operations. Can the insert be used for internal and external turning? The geometry and thickness of the insert make it suitable for both external and internal turning tasks, provided the chosen holder offers sufficient rigidity and correct positioning. How does the CVD coating affect tool life? The CVD coating enhances resistance to abrasive wear on the flank and rake faces, which commonly extends tool life in continuous and semi-continuous turning of cast iron. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T5125 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant CNMG geometry, the CVD‑coated carbide T5125 grade and the stable double‑sided chipbreaker to ensure reliable performance when turning cast iron under interrupted cuts; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG160616 T5125 — ISO CNMG 80° rhombic indexable insert for turning by Tungaloy The CNMG160616 T5125 is an ISO rhombic indexable insert for external and internal turning, optimised for machining cast iron where interrupted cuts or less stable setups are expected. CVD‑coated carbide grade T5125 Suited for cast iron and interrupted cuts Rhombic CNMG 80° geometry Double‑sided chipbreaker, with cylindrical hole Predictable chip control for repeatable part quality The combination of a CVD‑coated carbide substrate and a double‑sided chipbreaker delivers consistent chip formation even in variable cutting conditions. The coated layer increases wear resistance while the chipbreaker geometry reduces the risk of long, tangled chips; this translates into fewer stoppages and a more predictable surface finish. For shops processing cast iron, the T5125 grade provides a tougher edge that tolerates vibration and shock, so cycle times remain stable and rework rates fall. Robust edge stability when conditions are challenging Designed for interrupted cuts and less rigid setups, the insert’s rhombic CNMG shape with an 80° cutting angle provides a secure cutting edge and good side‑cutting strength. The tougher carbide composition resists chipping at the corner, extending effective tool life under shock loads. Explaining the term: CVD‑coated means a chemical vapour deposition layer is applied to the cemented carbide to enhance surface hardness and oxidation protection, which benefits throughput by delaying flank wear and maintaining dimensional accuracy over longer bore or external turning runs. Efficient handling and simple tool setup for production use Compatibility with a suitable holder is determined by form, relief angle, tolerance class, fastening, size and thickness; the insert’s 6.35 mm thickness, 16 mm inscribed circle and 1.6 mm corner radius make it straightforward to match with standard CNMG toolholders. The profile — rhombic CNMG with a cylindrical hole — permits reliable clamping and repeatable indexing, reducing setup time during tool changeovers. Fewer handling steps and predictable indexing help maintain productive machine utilisation and reduce operator error. Contact Metav Werkzeuge for tailored advice on integrating genuine Tungaloy CNMG160616 T5125 inserts into existing tool systems and to arrange direct supply from our stock Technical data Article number: 6850165 Manufacturer SKU: TUN6850165 SKU: 6850165-Tungaloy Manufacturer: Tungaloy Core specifications Corner radius: 1.6 mm Plate thickness: 6.35 mm Inscribed circle: 16 mm Relief angle: 0° Lead / cutting angle: 80° Special features & application CVD‑coated carbide (grade T5125) Rhombic CNMG form (ISO) Double‑sided chipbreaker With cylindrical hole for secure clamping Intended use: turning (external and internal) Optimised for cast iron and interrupted cuts FAQ What materials is this insert designed for? The CNMG160616 T5125 insert is optimised for machining cast iron; the T5125 CVD‑coated carbide grade offers a tougher edge for interrupted cuts and mixed stability conditions. How does the coating benefit performance? The CVD coating on this Tungaloy grade increases surface hardness and oxidation resistance, delaying flank wear and helping the insert maintain dimensional accuracy over extended runs. Which holder geometry is required for the insert? Compatibility depends on holder form, clearance (0° relief here), tolerance class, fastening and size; the CNMG 16 inscribed circle and 6.35 mm thickness match standard CNMG toolholders when the holder is specified for ISO CNMG inserts. Can the insert be indexed to present a fresh edge? Yes, the insert is double‑sided with multiple cutting edges; indexing to a new edge restores cutting performance without discarding the carbide body. What does the 80° designation mean for cutting? The 80° geometry indicates the major cutting angle of the rhombic insert, offering improved side strength and suitability for both external turning and light side‑cutting operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160616 T515 Wendeplatten - Tungaloy
Take advantage of a high-performance, CVD-coated carbide grade that delivers economical machining of cast iron with consistent chip control and reliable seating in ISO-compatible holders. Benefit from the sturdy 80° rhombic geometry, 1.6 mm corner radius and double-sided chipbreaker to maintain production uptime. Order directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. CNMG160616 T515 indexable turning insert by Tungaloy — ISO turning grade for cast iron machining CNMG160616 T515 is an ISO-standard, rhombic indexable insert designed for external and internal turning in cast iron applications. Its geometry and grade are matched to holders that comply with ISO form, relief angle, tolerance and fastening dimensions. ISO rhombic insert, 80° geometry CVD-coated carbide grade T515 1.6 mm corner radius for robust cuts Double-sided chipbreaker, cylindrical hole Reliable performance with a CVD-coated carbide grade The CVD-coated carbide composition of this grade offers a balanced combination of wear resistance and toughness that is particularly suited to economical machining of cast iron. The coating helps to reduce flank wear and improves heat resistance during sustained cutting, which results in a longer tool life and more predictable performance in series production. For operations where machining economy and consistent cycling are priorities, this grade provides measurable advantages in process stability. Geometry and mounting that ensure secure seating and repeatability Built to the ISO profile CNMG form, the insert features an 80° rhombic geometry and a 1.6 mm corner radius that contribute to robust edge strength and versatile turning capability. The plate thickness of 6.35 mm and the cylindrical hole with a matching seating design ensure precise clamping and repeatable positioning in compatible holders. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so pairing the insert with the correct holder and shim is essential for stable machining. Chip control engineered for cleaner cuts and surface quality The double-sided chipbreaker integrated into the cutting face supports controlled chip formation across a range of cutting conditions, helping to avoid long, stringy chips and to maintain a consistent surface finish. Optimised chip control reduces the risk of re-cutting and supports higher feed rates where machine and workpiece rigidity allow. For interrupted cuts or unstable setups, selecting the appropriate chipformer and adapting cutting parameters will contribute directly to process reliability. System-level compatibility for efficient tool management As part of an ISO indexable system, the insert is intended to be used with a matching holder, suitable underlay/shim and the correct clamping screw set. This system approach simplifies inventory and reduces set-up times because inserts and holders designed to ISO specifications are interchangeable across many tool platforms. Checking the holder form and tolerance ensures accurate seat contact and consistent cutting edge orientation in repetitive production tasks. Economic benefits through targeted application and selection This grade is developed for the economical machining of cast iron where production throughput and stable chip formation are priorities. Selecting the T515 grade and the CNMG geometry allows for competitive cutting speeds while maintaining predictable wear characteristics. When stability, interrupted cuts or higher cutting speeds are factors, choosing the right combination of grade and chipbreaker will often result in lower per-part tool costs and more efficient cycle times. Practical selection tips and recommended checks before use Choose the specific chipbreaker and grade variant based on the workpiece material, the presence of interruptions and the rigidity of the machine set-up. Verify holder compatibility against the ISO form, the 0° relief angle and the plate dimensions before installation. The insert designation CNMG160616 indicates the form and size; confirm this against the holder specifications and ensure proper clamping to gain the expected repeatability and cutting performance. For application-specific advice on the Tungaloy CNMG160616 T515 indexable insert, and to request fast supply or technical consultation, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available for selection and compatibility checks Technical data Article number: 6744296 Manufacturer SKU: TUN6744296 Manufacturer article number: 6744296 Model series: ISO indexable turning inserts Material: carbide Coating / grade: T515 (CVD-coated) Application: turning Facts Geometry: CNMG (rhombic), 80° Size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Relief (free) angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features ISO-standardised insert form Designed for economical cast iron machining System: insert + holder + shim + clamping screws Compatible with ISO-compliant external holders FAQ Is this insert suitable for machining cast iron? Yes. The CNMG160616 T515 insert from Tungaloy is formulated for economical machining of cast iron and is recommended for that material class. Which holders are compatible with this insert? Holders that accept CNMG ISO inserts with matching form, tolerance, thickness and clamping for a 16 mm plate and 6.35 mm thickness will be compatible. What does the T515 designation indicate? T515 denotes a CVD-coated carbide grade optimised for economical performance on cast iron, balancing wear resistance and toughness. Can the insert handle interrupted cuts? The T515 grade can be used for interrupted cuts, but selection should be made according to workpiece stability and cutting conditions to ensure edge security. How many cutting edges are available per insert? The insert features a double-sided chipbreaker and the CNMG form supports indexing according to standard insert re-use practices; follow the manufacturer’s indexing and clamping procedures for safe re-use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9205 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T9205 grade and a rhombic CNMG 80° geometry to increase productivity and tool life in stable turning applications; order directly via Metav Werkzeuge or consult our technicians for compatibility and process optimisation. CNMG160616 T9205 Turning Insert by Tungaloy — CVD-coated Carbide, Double-sided CNMG160616 T9205 is a precision ISO rhombic insert designed for productive external and internal turning of steel under stable machining conditions CVD-coated carbide grade T9205 Double-sided insert with chipbreaker Rhombic CNMG 80° geometry 0° clearance angle, 1.6 mm corner radius Higher productivity through a wear-resistant CVD coating The T9205 grade combines a CVD-coated carbide substrate with a microstructure optimised for wear resistance, allowing higher cutting speeds in many turning operations. The chemical vapour deposition (CVD) layer provides a hard, adherent surface that reduces flank wear and extends the usable life of each cutting edge. For production environments where stable setups and consistent component quality are essential, this coating reduces tool changes and supports steady cycle times. Choosing a coated grade like this is a rational step towards predictable process performance and lower cost per part. Stable clamping and ISO compatibility for consistent results The ISO CNMG geometry with an 80° included angle and a 0° clearance angle ensures secure clamping in standard holders and a predictable cutting force direction, which helps maintain accuracy during external and internal turning. The plate is double-sided, effectively doubling the number of usable edges and improving economy in batch production. A 6.35 mm thickness and a 1.6 mm corner radius balance stiffness and edge strength, while the cylindrical central hole supports reliable fixation with the corresponding clamp system. These dimensional choices contribute directly to process stability and repeatable surface quality. Practical guidance for machining and chip control Designed primarily for turning steel, the insert performs best in stable setups and when matched with an appropriate chipbreaker pattern and cutting data. The double-sided chipbreaker manages chip formation and evacuation, reducing the risk of built-up edge and improving the surface finish on turned components. Select speeds and feeds according to machine rigidity and workpiece material, and prefer light finishing passes for high-quality faces. When combined with the correct holder and clamping accessories, this insert delivers measurable gains in productivity and reproducibility while simplifying tool management in the shop. For ordering and detailed application advice on the T9205 grade, contact Metav Werkzeuge for spare parts, compatibility checks or cutting data: info@metav-werkzeuge.com / +49 2822 7131930 — Metav Werkzeuge will assist with product selection and availability. Technical data Article number: 6785733 Manufacturer SKU: TUN6785733 SKU: 6785733-Tungaloy Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 16 mm Included angle: 80° Clearance angle: 0° Special features CVD-coated carbide Grade T9205 for steel turning ISO turning insert CNMG160616 Rhombic plate, 80° geometry Double-sided with chipbreaker Cylindrical central hole for clamp fixation Series: ISO-Drehwendeschneidplatten Typical use: external and internal turning FAQ What materials is this insert suitable for? This CNMG160616 T9205 turning insert is specified for productive machining of steel; the T9205 CVD-coated carbide composition is optimised for stable turning conditions and higher cutting speeds. How does the double-sided design affect tool economy? A double-sided CNMG insert provides multiple usable edges, which reduces cost per edge and increases overall tool life before disposal; the 6.35 mm thickness and 1.6 mm corner radius support repeated re-indexing. Which holder and clamping features are required for safe use? Compatibility depends on the holder’s form, relief angle, tolerance class, fixation method and the plate’s size and thickness; secure clamping with a suitable clamp and backing shim is essential for consistent results with this insert. Can this insert be used for internal turning as well as external turning? Yes, the rhombic CNMG160616 geometry and secure clamping via the cylindrical hole allow use in both external and internal turning applications when the appropriate holder and tool overhang are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9205 Wendeplatten - Tungaloy
Optimise turning performance with the CVD‑coated T9205 grade and ISO rhombic geometry for productive steel machining; precise fit to standard holders ensured by the 16 mm size, 6.35 mm thickness and 80° form. Order via Metav Werkzeuge or request compatibility advice from our consultants. CNMG 160616 T9205 – ISO turning insert by Tungaloy (CVD‑coated carbide, 80° rhombic) The CNMG160616 T9205 is a CVD‑coated carbide turning insert designed for productive external and internal turning of steel under stable conditions, providing wear resistance at elevated cutting speeds CVD‑coated T9205 wear‑resistant grade ISO CNMG 160616 rhombic geometry Double‑sided chipbreaker for stable chips Cylindrical hole for secure clamping High productivity through a wear‑resistant CVD grade The CVD‑coated T9205 grade combines a hard outer layer with a tough carbide substrate to extend tool life during continuous turning operations. This composition is tailored for productive turning of steel at higher cutting speeds, reducing tool changes and increasing effective machining time. The economic advantage arises from longer edge life under stable cutting conditions and predictable performance when paired with appropriate cutting data. The term CVD‑coated refers to a chemical vapour deposition layer that enhances abrasion resistance without compromising the substrate toughness, making the insert a reliable choice for serial production. Standardised geometry for reliable holder compatibility The ISO rhombic form and dimensions follow the established standard, so compatibility with toolholders is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The CNMG geometry with an 80° included angle, 16 mm inscribed circle and 6.35 mm thickness gives a robust seating and repeatable positioning in most ISO‑compatible external holders or boring bars. The 0° clearance angle and cylindrical hole support secure clamping; however, correct matching of the holder’s pocket and clamping screw is essential for optimal repeatability and safety. Specifying the ISO designation ensures straightforward replacement and inventory control on the shop floor. Design features that support process stability and surface quality A double‑sided chipbreaker built into the insert helps control chip formation for a range of turning operations, promoting consistent evacuation and reducing the risk of built‑up edge. The 1.6 mm nose radius balances edge strength and achievable surface finish—larger radii improve stability and tool life, while smaller radii favour fine finishing. The rhombic shape also offers indexability: both sides of the insert can be rotated to present a fresh cutting edge, extending utilisation per insert. These details contribute to a controlled machining process, delivering reproducible surface quality and helping to maintain cycle‑time targets. Practical guidance for selection and process optimisation Select the chipbreaker style and the T9205 grade to match workpiece material, machining stability and intended cutting parameters. If higher speeds and continuous cuts are planned, the CVD coating and the robust substrate will support extended intervals between changes. For interrupted cuts or unstable setups, consider a grade or geometry adapted for tougher conditions—this insert excels when the machine setup and fixture provide rigidity. Compatibility checks should include holder pocket dimensions and clamping method; the insert’s ISO designation and hole style assist in choosing the correct fastening and torque settings. Contact Metav Werkzeuge for tailored recommendations on holder matching, cutting data and fast supply of Tungaloy inserts; specialists can confirm compatibility and advise on optimal machining parameters Technical data Article number: 6785694 SKU: 6785694-Tungaloy Model series: ISO turning inserts Core specifications ISO designation: CNMG160616 Grade/coating: T9205 (CVD‑coated carbide) Size: 16 mm inscribed circle Thickness: 6.35 mm Nose radius: 1.6 mm Included angle: 80° Design and features Plate form: rhombic Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Chipbreaker: double‑sided FAQ What materials is this insert intended for? The CVD‑coated T9205 grade is intended primarily for productive turning of steel under stable machining conditions; the insert performs best where elevated cutting speeds and consistent chip control are required. How does the CNMG160616 geometry affect holder selection? ISO‑standard geometry such as CNMG160616 determines fit by shape, tolerance class, thickness and fastening; ensure the holder pocket and clamp suit the rhombic 80° form and the 6.35 mm thickness for secure seating. What is the benefit of the double‑sided chipbreaker? A double‑sided chipbreaker supports repeatable chip control and allows indexable use of both cutting edges, improving overall insert utilisation and process reliability during turning operations. Can the insert achieve good surface finish with a 1.6 mm radius? The 1.6 mm radius provides a balance between edge strength and finish quality; it is suitable for general finishing and semi‑finish turning where stability is adequate. Which SKU identifies this exact item for ordering and reordering? The item is listed as SKU 6785694‑Tungaloy and the manufacturer article number is 6785694 for precise ordering. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160616 T9205 Wendeplatten - Tungaloy
Take advantage of a robust combination of wear-resistant T9205 CVD coating, precise 80° rhombic geometry and a 1.6 mm corner radius to secure stable, productive turning cycles and longer tool life. Order genuine inserts or consult Metav Werkzeuge for application support and procurement. CNMG 160616 T9205 Tungaloy — ISO turning indexable insert, rhombic 80°, CVD-coated carbide The CNMG160616 T9205 Tungaloy insert is an ISO-standard rhombic turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide grade T9205 80° rhombic geometry for general turning 1.6 mm corner radius for robust engagement Double-sided chipbreaker for consistent chip control Higher throughput through a wear-resistant grade The combination of a CVD-coated surface and a carbide substrate provides improved wear resistance compared with uncoated grades, enabling higher cutting speeds where process conditions are stable. This results in fewer tool changes and longer uninterrupted runs, which translates directly into improved throughput and reduced per-part machining cost. The T9205 designation indicates a grade optimised for steel machining, offering a balance between hardness and toughness for predictable performance. Material match and clear cutting advantages for steel turning Engineered primarily for the machining of steel, the insert’s double-sided chipbreaker geometry supports effective chip formation and evacuation during turning operations. The chip control features reduce the risk of chip interference and surface damage, improving consistency of results. For less experienced machinists, this means a simpler choice: select a chipbreaker and grade aligned to the workpiece and stability level, and expect stable cutting behaviour and reliable surface finish. Secure fit and geometry that simplify set-up Conforming to ISO dimensions, the insert’s CNMG160616 shape and the with cylindrical hole mounting option ensure compatibility with standard indexable holders. The 80° rhombic form and 0° relief angle favour general-purpose turning, offering a forgiving geometry for a range of feeds and depths of cut. The 6.35 mm thickness and 16 mm size provide mechanical rigidity for steady cutting engagement, while the 1.6 mm corner radius offers a compromise between edge strength and finish quality. Predictable economics through fewer interruptions Longer tool life and stable chip formation contribute to measurable economic benefits: less downtime, fewer regrinds and more consistent part quality. The carbide substrate with CVD coating helps maintain edge integrity at elevated speeds, reducing flank wear and the need for premature insert changes. For production environments seeking repeatable cycles and lower tooling interventions, this indexable insert supports cost-efficient, high-availability machining. For proven productivity with Tungaloy’s T9205 grade, contact Metav Werkzeuge for tailored application advice and to order original CNMG 160616 inserts through Metav Werkzeuge. Technical data Article number: 6785685 SKU: 6785685-Tungaloy Manufacturer SKU: TUN6785685 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9205 (CVD-coated carbide) Application: Turning Facts ISO designation: CNMG160616 Shape: rhombic, 80° Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Special features Hole: with cylindrical hole Chipbreaker: double-sided Schneidstofftyp: CVD-coated carbide Typical use: external and internal turning under stable conditions FAQ What workpieces is this insert best suited for? The CNMG160616 T9205 Tungaloy indexable insert is optimised for the productive turning of steel; the T9205 CVD-coated carbide grade offers wear resistance suitable for higher cutting speeds under stable conditions. How does the chipbreaker design affect machining? The double-sided chipbreaker on this rhombic insert supports consistent chip formation and evacuation, improving surface quality and reducing the chance of chip-related interruptions during turning with the CNMG160616 insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for CNMG160616 and is compatible with holders that accept rhombic 80° ISO inserts, using the cylindrical hole for secure clamping. What geometrical features contribute to edge stability? The combination of 6.35 mm thickness, 80° rhombic form and 1.6 mm corner radius delivers mechanical rigidity and a robust cutting edge, helping to maintain stable engagement and predictable wear behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 grade’s combination of CVD-coated carbide wear resistance and fracture toughness together with the ISO CNMG geometry for predictable tool life and consistent surface finish; order the insert directly via Metav Werkzeuge or request technical advice from our consultants. CNMG 160616 T9215 – ISO turning insert, CVD-coated carbide, for turning CNMG 160616 T9215 is an ISO‑standard indexable insert designed for external and internal turning, offering a robust grade for medium steel machining. CNMG ISO shape with 80° included angle CVD-coated carbide T9215 for medium steel Double-sided chipbreaker with cylindrical hole 1.6 mm corner radius for a sturdy profile Proven grade for productive medium‑steel turning The T9215 grade is a CVD-coated carbide engineered to balance high wear resistance with reliable fracture toughness. This combination supports elevated material removal rates in continuous to slightly interrupted turning operations, translating into fewer tool changes and improved cycle times. By favouring a wear‑resistant coating while retaining core toughness, the insert sustains performance across a range of common steels, reducing unplanned stoppages and contributing to a steadier production flow. Standardised geometry for secure clamping and repeatability The CNMG160616 geometry follows ISO conventions to ensure compatibility with standard CNMG holders and toolholders. The rhombic shape with an 80° included angle and a 0° clearance definition gives a stable cutting attitude for general turning tasks, while the 6.35 mm plate thickness supports higher axial and radial loads. The insert’s cylindrical hole and precise tolerance class enable firm clamping and repeatable positioning, which helps maintain consistent part tolerances and surface quality across batches. Chip control, edge life and recommended use cases A double-sided chipbreaker optimises swarf formation and evacuation in typical steel turning, improving process security and finish quality. The 1.6 mm corner radius provides a robust cutting edge that resists chipping during moderate interruptions, making the insert suitable for both external profiling and light internal turning. For best results, select the chipbreaker and insert grade to match the specific material, cutting data and machine stability. If further clarification is required regarding cutting speeds or feed rates for particular steel grades, our team is available to assist at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge for availability and technical consultation on the Tungaloy CNMG160616 insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773864 Manufacturer SKU: TUN6773864 Model series: ISO turning inserts Material: Carbide Grade/coating: T9215 (CVD-coated carbide) Facts Insert designation: CNMG160616 Insert size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Hole: with cylindrical hole Features & applications Rhombic insert form (CNMG) Double-sided chipbreaker ISO‑standard indexable insert Intended application: turning (external and internal) Recommended for medium steel machining Compatible with standard CNMG holders FAQ What materials is this insert best suited for? The CNMG 160616 T9215 insert is optimised for medium steel applications; the CVD‑coated carbide grade provides a balance of wear resistance and toughness for productive steel turning. Is the insert compatible with standard CNMG toolholders? Yes, the insert follows ISO CNMG dimensions and clamping features, so standard CNMG toolholders that accept an insert with a cylindrical locating hole will be compatible. How does the 1.6 mm corner radius affect cutting performance? A 1.6 mm corner radius delivers a more robust cutting edge, improving resistance to chipping and enabling slightly heavier depths of cut where machine and workpiece rigidity permit. How many indexing positions are available per insert? The insert is double‑sided with reversible cutting edges; each usable edge count depends on the holder setup, but the design allows economical indexing to extend overall edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide durability, double-sided chipbreaker versatility and ISO compatibility for efficient, high-productivity turning; order matching holders and genuine Tungaloy inserts directly via Metav Werkzeuge or consult the advisers for application-specific selection. CNMG 160616 T9215 — ISO turning insert by Tungaloy for medium-steel turning The CNMG160616 T9215 is a rhombic ISO turning insert with a cylindrical mounting hole, designed for external and internal turning in medium steel where a balance of wear resistance and fracture toughness is required. CVD-coated carbide T9215 for medium steel ISO CNMG rhombic 80° geometry Double-sided chipbreaker for interrupted cuts Cylindrical hole for secure mounting Consistent productivity with a wear‑resistant CVD grade The T9215 CVD-coated carbide grade pairs wear resistance with controlled toughness to maintain tool life under continuous to mildly interrupted cutting. This combination reduces downtime and tool changes, which supports higher throughput in batch and serial production. The coating is applied via chemical vapour deposition to form a thin, adherent layer that withstands elevated cutting temperatures; as a result, productivity is increased while maintaining dimensional stability on medium‑strength steels. Secure clamping and geometry that stabilises cuts The rhombic CNMG form with an 80° cutting geometry and a cylindrical through‑hole gives a reliable clamping interface for common external holders and boring bars. The insert’s 6.35 mm thickness and 16 mm size yield a stable cutting edge engagement, and the double‑sided chipbreaker provides two usable cutting edges per index, improving economy. A clear explanation: a chipbreaker controls chip formation and evacuation, which reduces chatter and surface defects and simplifies swarf handling. Select the right chipbreaker and grade for your process Match the T9215 grade and the double‑sided chipbreaker to workpiece material, machining type and component stability to achieve the best wear life and surface finish. For less stable setups choose gentler cutting parameters and a chipbreaker designed for interrupted cuts; for rigid, continuous cuts the T9215 grade allows more aggressive cutting speeds. This purposeful selection reduces scrap, increases first‑pass yield and shortens cycle times. System compatibility and workshop integration The insert is supplied as an ISO standard component within a system that comprises the insert, a suitable external holder or boring bar, clamping pad or clamp set and replacement screws. This modular approach enables quick integration into existing toolholders and streamlines inventory: keeping a small stock of inserts and clamps ensures rapid turnaround. Support for process planning and holder matching is available through Metav Werkzeuge to guarantee correct fit and performance. Contact Metav Werkzeuge for application advice and to secure original Tungaloy CNMG160616 T9215 inserts plus compatible holders and clamping sets for reliable medium‑steel turning. Technical data Article number: 6774082 Manufacturer SKU: TUN6774082 Product label: CNMG160616 T9215 Tungaloy insert Manufacturer: Tungaloy Numbers / Core technical data Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Cutting geometry: 80° Special features / Versions Material: carbide Grade/coating: T9215 (CVD-coated carbide) Insert form: rhombic (CNMG) Mounting: cylindrical through-hole Chipbreaker: double-sided Typical application: external and internal turning in medium steel Conforms to: ISO turning insert series FAQ What materials is this insert suited for? The Tungaloy CNMG160616 T9215 insert is formulated for medium‑strength steel machining, where its T9215 CVD-coated carbide provides an effective balance of wear resistance and fracture toughness. Can this insert be used for interrupted cuts? Yes. The insert’s double‑sided chipbreaker and robust carbide substrate make it suitable for continuous and light to moderate interrupted cuts when the correct parameters and holder are used. Which toolholders are compatible with the CNMG160616 geometry? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the CNMG form and cylindrical hole suit standard CNMG external holders and boring bars designed for ISO inserts. How does the CVD coating benefit machining performance? A CVD coating creates a hard, heat‑resistant surface layer that improves wear resistance at elevated cutting temperatures, extending cutting edge life and maintaining dimensional stability during longer runs. Is the insert reversible and economical? Yes. The rhombic CNMG form with double‑sided chipbreaker provides two usable cutting edges per index, which improves cost efficiency and reduces the frequency of tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9215 Wendeplatten - Tungaloy
High productivity through CVD-coated carbide grade T9215 and a 1.6 mm nose radius delivers consistent tool life and reliable surface finish; the ISO CNMG160616 rhombic geometry with an 80° approach angle ensures straightforward indexability and broad holder compatibility. Order directly via Metav Werkzeuge or consult their specialists for application support. CNMG 160616 T9215 — Turning indexable insert (ISO CNMG160616) by Tungaloy A CNMG 160616 T9215 indexable turning insert in rhombic form, designed for medium steel machining with a double-sided chipbreaker and cylindrical hole for secure clamping CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker, indexable ISO CNMG 160616, 80° rhombic geometry Engineered for sustained productivity in turning The combination of CVD-coated carbide and the T9215 grade provides improved wear resistance and predictable edge life in continuous to light interrupted cuts. With a reinforced 80° approach geometry and a 1.6 mm nose radius, the insert offers a balance between edge strength and surface finish, reducing the need for frequent regrinding or replacement. These characteristics translate directly into higher part throughput and lower tooling-related downtime for production environments that prioritise repeatable results. Clear compatibility and simple toolset integration Compatibility with toolholders depends on form, clearance angle, tolerance class, attachment method, size and thickness; the ISO CNMG configuration ensures integration into a wide range of standard holders. The rhombic form and 6.35 mm thickness permit robust clamping, while the cylindrical hole supports secure fastening. The double-sided chipbreaker design enables two effective cutting edges per index, helping to extend in-machine service life and reduce inventory variety for equivalent operations. Practical benefits for workshop efficiency Indexable geometry and a double-sided configuration reduce handling time and tooling costs: rotating the indexable plate restores a fresh cutting edge swiftly, improving uptime and throughput. The insert (SKU TUN6772202) is supplied as part of an ISO insert system that typically includes the matching outer holder or boring bar, clamping set and replacement screws, making adoption straightforward in existing tool setups. For shops seeking to increase productivity without complex process changes, the insert’s predictable behaviour under medium steel conditions supports stable cycle times and consistent surface quality. Application guidance and process reliability Designed primarily for turning — both outside and inside turning — the insert is most effective on medium steel where a mix of wear resistance and fracture toughness is required. The double-sided chipbreaker aids chip control and surface quality, while the T9215 carbide matrix suits continuous to lightly interrupted cuts common in batch and serial production. When selecting a chipbreaker and grade, match the sort and breaker to workpiece material, machining style and machine stability to achieve the promised performance and tool life. Contact Metav Werkzeuge for application advice and availability on the CNMG 160616 T9215 insert (SKU TUN6772202) from Tungaloy Technical Data Article number: 6772202 Manufacturer SKU: TUN6772202 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Inscribed circle / plate size: 16 mm Cutting edge radius: 1.6 mm Thickness: 6.35 mm Approach angle: 80° Clearance angle (free angle): 0° Hole: with cylindrical hole Special features CVD-coated carbide grade T9215 Double-sided chipbreaker Rhombic plate form (CNMG) ISO CNMG160616 compatibility Application: turning — outside and inside turning System build: ISO insert with matching holder, clamp set and replacement screws Typical use: medium steel machining; continuous to light interrupted cuts FAQ What materials is this insert best suited to machine? The CNMG 160616 T9215 insert from Tungaloy is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for continuous to lightly interrupted cuts. How large is the cutting edge radius and how does it affect finish? The insert features a 1.6 mm nose radius, which improves edge robustness and supports a consistent surface finish when used with appropriate cutting parameters and stable workholding. Is the plate indexable and how many edges are available? Yes — the CNMG geometry is double-sided with a chipbreaker, providing two indexable cutting edges per side and enabling fast in-machine indexing to restore a fresh edge. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness; the ISO CNMG160616 format integrates with standard CNMG holders and suitable boring bars designed for CNMG plates. What is the manufacturer SKU for ordering and identification? The manufacturer SKU is TUN6772202, and the article number is 6772202 for straightforward identification in procurement and inventory systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, 80° rhombic geometry, and a 1.6 mm corner radius for reliable mid-to-heavy steel turning; order directly via Metav Werkzeuge or request application advice from our consultants. CNMG160616 T9225 indexable insert for turning — Tungaloy, CVD-coated carbide, 80° rhombic CNMG160616 T9225 is a CVD-coated carbide indexable insert designed for ISO-standard turning tasks, optimised for medium to heavy steel machining. ISO rhombic 80° geometry CVD-coated carbide grade T9225 1.6 mm corner radius for stable cuts Double-sided chipbreaker for economical indexing Cylindrical hole for secure fastening Robust grade for variable cutting conditions and improved tool life The T9225 grade is a CVD-coated carbide designed as a robust, universal option for medium to heavy steel machining. The chemical vapour deposition coating increases wear resistance while preserving substrate toughness, which is particularly beneficial when cutting conditions change unexpectedly or when slight interruptions in the cut occur. This combination reduces the risk of edge chipping and extends usable index life, enabling a more consistent production rhythm and fewer tool changes—factors that contribute directly to higher throughput and lower machining costs. Precision geometry for dependable clamping and repeatability Built to the ISO designation, the rhombic 80° geometry with a 1.6 mm corner radius and 6.35 mm thickness provides a balance between cutting strength and versatility. The insert is supplied with a cylindrical hole, ensuring secure and repeatable clamping in compatible holders. Compatibility with a toolholder depends on matching form, relief angle, tolerance class, fastening method, size and thickness; when these parameters are observed, the system achieves reliable seating and repeatable concentricity. The 0° relief angle suits a wide range of turning tasks, offering neutral cutting behaviour that aids setup and process stability. Practical advantages on the shop floor and recommended applications The plate is double-sided with an integrated chipbreaker pattern that supports efficient chip control on both faces, making each index cost-effective for production use. Typical uses include external and internal turning where medium to heavy material removal rates are required. The system setup normally consists of the ISO insert, a matched external holder or boring bar, a backing plate or clamping set and replacement screws for maintenance. Selecting the correct chipbreaker and the T9225 grade for the workpiece material and machining stability will deliver improved surface finishes and predictable tool life, reducing downtime and increasing confidence in serial production runs. Contact Metav Werkzeuge to discuss the CNMG160616 T9225 insert’s suitability for specific turning tasks and to request availability or cutting data; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780824 Manufacturer SKU: TUN6780824 SKU: 6780824-Tungaloy Model series: ISO turning indexable inserts Dimensions & core data Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 80° Hole: with cylindrical hole Grade: T9225 Substrate/coating: CVD-coated carbide Features & applications Shape: rhombic Chipbreaker: double-sided Typical application: external and internal turning System components: compatible holder, backing/clamping set and replacement screws required Material focus: medium to heavy steel machining FAQ What materials is this insert intended for? The insert is intended primarily for medium to heavy steel machining; the T9225 grade provides toughness and wear resistance suited to these materials. How does the CNMG160616 geometry influence stability? The 80° rhombic geometry and 1.6 mm corner radius offer a compromise between strength and versatility, improving edge stability in turning operations and supporting controlled chip formation. Is the insert reversible and economical to index? Yes, the insert is double-sided with a chipbreaker on both faces, enabling economical indexing and longer effective usage per insert. Which holders are compatible with this ISO insert? Compatibility requires matching the insert form, relief angle, tolerance class, fastening method, size and thickness; when aligned, holders and boring bars provide secure seating for repeatable performance. What does the T9225 grade mean in practice? The T9225 designation denotes a robust, CVD-coated carbide grade developed for reliable performance under variable engagement and slightly interrupted cuts common in heavier steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9225 Wendeplatten - Tungaloy
Reliable performance and adaptable geometry make the CNMG160616 an efficient choice for medium-to-heavy steel turning; the CVD-coated T9225 grade provides toughness for interrupted cuts while the two-sided chipbreaker supports consistent chip control — order directly via Metav Werkzeuge or request advice from our consultants. CNMG160616 T9225 Tungaloy indexable insert for turning (CNMG 160616, CVD-coated carbide) CNMG160616 is an ISO-form indexable insert engineered for external and internal turning, combining a robust CVD-coated carbide grade with a two-sided chipbreaker for stable performance in varying engagement conditions. CVD-coated carbide grade T9225 Two-sided chipbreaker for interrupted cuts ISO CNMG 160616 geometry, with hole Suited for medium to heavy steel turning High-performance cutting for productive turning The insert is designed to raise machining throughput by combining a CVD-coated surface with a tough T9225 substrate; this pairing improves wear resistance and edge strength so that the cutting edge endures fluctuating loads and light interruptions. The indexable insert format enables quick, repeatable tool changes, reducing downtime and supporting continuous production cycles. Emphasis on cutting stability and predictable flank wear translates directly into fewer unplanned stops and a steadier surface finish on turned components. Straightforward integration with ISO toolholders Compatibility with standard holders is ensured by the ISO designation and defined geometry: the ISO CNMG 160616 format, rhombic plate shape and central hole simplify mounting and orientation. Key dimensions such as 16 mm size, 6.35 mm plate thickness and 1.6 mm corner radius allow selection of the correct clamping assembly and clearance setting. The insert’s 0° relief angle and the 80° engagement geometry support common external and internal turning set-ups, making the part a reliable component for existing turning stations without extensive adapter modifications. Reliable chip control and material suitability The two-sided chipbreaker offers controlled chip formation for a broad range of steels, delivering consistent evacuation even under moderately interrupted cuts. The grade is described as a robust universal choice for medium-to-heavy steel machining, favouring applications where variable engagement or occasional interruptions demand additional toughness. Clear technical specification and ISO normalisation reduce selection uncertainty, while the coated carbide construction helps maintain cutting-edge integrity over longer tool life, contributing to lower process costs per component. For tailored advice or to place an order for the Tungaloy CNMG160616 T9225 insert, contact Metav Werkzeuge—our specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application details and holder compatibility. Technical data Article number: 6781233 SKU: 6781233-Tungaloy Manufacturer SKU: TUN6781233 Material: carbide Model series: ISO turning indexable inserts Core technical data ISO designation: 160616 Geometry: CNMG Size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Engagement angle: 80° Hole: with hole (cylindrical hole) Special features Grade: T9225 Coating / type: CVD-coated carbide Chipbreaker: two-sided Shape: rhombic Application: turning FAQ What materials is this insert suitable for? The CNMG160616 T9225 insert is optimised for medium-to-heavy steel machining; the CVD-coated carbide and the grade’s toughness suit variable engagement and light interruptions. How does the chipbreaker affect performance? The two-sided chipbreaker on this insert improves chip control and evacuation, helping maintain stable cutting conditions during interrupted or heavy engagement turning. Which dimensions are critical when selecting a holder? Key dimensions include the size (16 mm), plate thickness (6.35 mm) and corner radius (1.6 mm); compatibility also depends on the CNMG geometry and central hole style. Is the insert compatible with standard ISO holders? Yes, the ISO CNMG 160616 format and rhombic shape are designed for compatibility with standard CNMG-compatible holders when correct clearance and fastening are observed. What are the main benefits of the T9225 grade? T9225 is a robust universal grade that balances wear resistance and toughness, providing reliable performance in medium-to-heavy steel turning and under slightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a defined 1.6 mm corner radius ensures robust performance in medium to heavy steel turning, reducing tool changes and improving process stability. Order the CNMG160616 T9225 turning insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG 160616 T9225 indexable turning insert — CVD-coated carbide, 80° rhombic (Tungaloy) The CNMG160616 T9225 is an ISO rhombic indexable turning insert designed for medium to heavy steel turning, offering a balance of toughness and wear resistance for interrupted or variable cutting conditions CVD-coated carbide for durable cutting Robust universal grade for medium to heavy steel 80° rhombic geometry for versatile turning Double-sided chipbreaker for controlled chips Increased productivity through robust cutting performance The CVD-coated carbide composition delivers a combination of wear resistance and toughness that benefits longer tool life and fewer interruptions. As a robust universal grade, the insert is formulated to cope with changing engagement conditions and light interruptions, making it suitable for batch and serial production where consistent cycle times matter. The result is improved process stability and a reduction in unforeseen downtime thanks to a cutting edge that retains integrity under heavier loads. Geometry and edge design that support surface finish and tolerance control The 80° rhombic geometry and 1.6 mm corner radius provide a stable cutting edge that contributes to predictable tool deflection and repeatable part geometry. The mid-thickness of 6.35 mm combines stiffness with effective heat dissipation, helping to produce consistent surface quality on turned components. These measured design choices translate into fewer reworks and more reliable adherence to dimensional tolerances during external and internal turning operations. Chip control and integration for smoother workflows Equipped with a double-sided chipbreaker, the insert facilitates controlled chip formation across a range of cutting parameters, reducing the risk of long, entangling swarf and improving operator safety. The ISO format with a cylindrical hole ensures straightforward mounting in compatible holders; compatibility is governed by holder form, clearance angle, tolerance class, fastening method, size and thickness. Such clear interfaces support fast changeovers and predictable tool set-up, which in turn streamlines machine utilisation and operator efficiency. Contact Metav Werkzeuge today for tailored application advice and availability of Tungaloy CNMG160616 T9225 indexable turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780794 Manufacturer SKU: TUN6780794 Manufacturer article number: 6780794 Model series: ISO turning indexable inserts Name: CNMG160616 T9225 Tungaloy insert Facts ISO designation: 160616 Geometry angle: 80° Corner radius: 1.6 mm Relief angle: 0° Thickness: 6.35 mm Inscribed circle / size: 16 mm Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD-coated Grade: T9225 — universal, robust for medium to heavy steel turning Chipbreaker: double-sided Plate form: rhombic Typical application: external and internal turning System components: ISO insert, compatible outer holder or boring bar, shim/ clamp set and replacement screws FAQ What materials are suited to this insert? The CNMG160616 T9225 insert is intended primarily for medium to heavy steel turning; the T9225 grade offers toughness for varying engagement conditions. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker integrated into the insert design, enabling consistent chip formation across a range of feeds and depths. What determines compatibility with existing tool holders? Compatibility depends on holder form, clearance (relief) angle, tolerance class, fastening method, size and plate thickness; the ISO format and cylindrical hole of this insert facilitate mounting in matching holders. Can the insert be used for interrupted cuts? Yes. The T9225 grade is formulated to handle light interruptions and changing cutting conditions, making it suitable for such applications. What is the SKU and how can availability be checked? The manufacturer SKU is TUN6780794; availability and delivery details can be obtained through Metav Werkzeuge using the contact details provided. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9235 Wendeplatten - Tungaloy
Take advantage of a tough, CVD-coated carbide grade and the ISO-standard CNMG form to secure stable turning under interrupted or unstable cutting conditions; the combination of reliable edge security and simple holder compatibility keeps production moving with predictable results. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. CNMG160616 T9235 ISO turning insert — CVD-coated carbide, 80° rhombic form (Tungaloy) CNMG160616 T9235 is an ISO-standard rhombic turning insert designed for external and internal turning operations; the insert is optimised for steel machining under interrupted cuts and unstable conditions. CVD-coated carbide for tough steel applications 80° rhombic geometry for versatile turning Double-sided chipbreaker for extended tool life Cylindrical hole, 6.35 mm thickness, ISO size 16 Consistent performance when conditions vary The CNMG-style turning insert utilises a CVD-coated carbide grade developed for toughness rather than top-speed cutting, which translates into reliable material removal where vibrations, interrupted cuts or less rigid set-ups occur. The T9235 designation indicates a coating and substrate pairing optimised for steel, reducing the risk of chipping and flank wear during heavy interruptions. For production environments where process stability cannot always be guaranteed, this insert provides predictable life and fewer unplanned tool changes, supporting higher overall equipment effectiveness. Easy integration with ISO holders and predictable set-up Manufactured to ISO dimensions, the insert fits a wide range of standard holders and boring bars; compatibility is governed by form, relief angle, tolerance class, fixation method, size and thickness. The 80° rhombic form and 1.6 mm corner radius deliver balance between strength and accessibility in profile turning, while the central cylindrical hole enables secure clamping. Clear adherence to ISO norms simplifies tool selection, shortens machine set-up times and reduces the risk of mismatched assemblies, which in turn supports faster job throughput and lower set-up costs. Practical chip control and application guidance Equipped with a double-sided chipbreaker, the insert helps to control chip formation across a range of feeds, contributing to safer chip evacuation and improved surface finish in many turning tasks. The recommended role for this grade is turning of steel at moderate cutting speeds; choose matching chipbreaker geometry and a holder with sufficient rigidity for best results. For internal turning choose an appropriate boring bar; for external operations a robust external holder ensures edge security. Where uncertainty exists about the correct holder or cutting parameters, consult technical advice to align the insert, chipbreaker and holder to the workpiece and machining conditions. Discuss machining parameters and holder compatibility with Metav Werkzeuge to ensure the CNMG160616 T9235 insert is specified correctly for the intended turning application Technical data Article number: 6785823 Manufacturer SKU: TUN6785823 Item label: CNMG160616 T9235 Tungaloy-Wendeplatte Core specifications Shape / ISO size: CNMG 160616 Thickness: 6.35 mm Inscribed circle / size: 16 mm Relief angle: 0° Lead angle: 80° Corner radius: 1.6 mm Designs and special features Material: cemented carbide, CVD-coated (grade T9235) Chipbreaker: double-sided Hole: with cylindrical hole for screw fixing Plate form: rhombic, double-sided indexable insert Typical application: external and internal turning of steel, interrupted cuts FAQ What steels is this insert best suited for? The CNMG160616 T9235 insert is designed as a tough CVD-coated carbide grade optimised for machining a broad range of steels, especially where interrupted cuts or unstable conditions are expected. Can the insert be used for both external and internal turning? Yes, the ISO CNMG form and the cylindrical hole permit use in both external holders and appropriately rated boring bars for internal turning. What does the T9235 designation indicate? T9235 identifies the coating and substrate combination developed by the manufacturer for enhanced toughness and resistance to chipping when turning steel at moderate cutting speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, precise ISO CNMG geometry and a robust double-sided chipbreaker for reliable turning under interrupted cuts; order direct through Metav Werkzeuge or consult the technical advisers for integration support. CNMG160616 T9235 CNMG turning insert by Tungaloy CNMG160616 T9235 is an ISO‑standard rhombic turning insert designed for general external and internal turning applications, optimised for steel under unstable or interrupted cutting conditions CNMG geometry ISO 160616 CVD-coated carbide grade T9235 Double-sided chipbreaker for chip control Rhombic form with cylindrical hole 80° included angle for robust cuts Stable performance in interrupted turning The insert combines a CVD-coated carbide substrate with the T9235 grade to deliver resilience where machining conditions are unstable. The coating improves abrasive wear resistance while the tough substrate tolerates lower cutting speeds and interrupted cuts; this results in reduced edge chipping and longer intervals between insert changes. Such characteristics support a steady production flow and minimise unplanned downtime for medium‑duty steel turning. Simple integration with ISO holder systems Built to the ISO CNMG160616 geometry, the insert fits standard holders when form, relief angle, tolerance class, clamping method, size and thickness match. The rhombic shape, cylindrical hole and 6.35 mm plate thickness ensure secure seating and repeatable clamping. Clarifying these parameters simplifies tool selection and reduces setup time, so holders and toolposts can be matched without trial‑and‑error. Process reliability and predictable chip control The combination of a double-sided chipbreaker and the Tungaloy material specification promotes consistent chip formation and evacuation during turning, especially in steel. Predictable chips contribute to safer machining, cleaner surfaces and fewer interruptions for manual chip removal. The insert’s 80° included angle and 0° clearance geometry deliver robustness for interrupted cuts while maintaining acceptable surface finish and tool life. For reliable turning of steel components choose the Tungaloy CNMG160616 T9235 insert—order via Metav Werkzeuge or contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or +49 2822 7131930 for compatibility advice and procurement. Technical data Article number: 6785814 Manufacturer SKU: TUN6785814 Model series: ISO-Drehwendeschneidplatten Designation: CNMG160616 T9235 Manufacturer: Tungaloy Core data Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Thickness: 6.35 mm Plate size: 16 mm Design and special features Carbide, CVD-coated grade T9235 Double-sided chipbreaker Rhombic plate form Cylindrical hole ISO designation CNMG160616 Intended application: Turning FAQ What materials is this insert suited for? The CNMG160616 T9235 insert is specified for machining steel and performs well in interrupted cutting and unstable conditions due to the tough T9235 grade. How does the chipbreaker affect machining? The double-sided chipbreaker on the Tungaloy insert ensures controlled chip formation and evacuation, improving surface quality and reducing manual chip handling. Is this insert compatible with standard CNMG holders? Compatibility depends on holder geometry and tolerance class; the insert follows ISO CNMG160616 dimensions, so matching form, relief angle, clamping style, size and thickness will enable correct fitment. What advantages does the CVD coating provide? The CVD coating on the T9235 grade increases resistance to abrasive wear and helps extend cutting edge life under the lower cutting speeds typical for this grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160616 T9235 Wendeplatten - Tungaloy
CNMG 160616 T9235 Wendeplatte zum Drehen von Tungaloy Die CNMG160616 T9235 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für Stahlbearbeitung unter instabilen Bedingungen und bei unterbrochenem Schnitt CVD-beschichtetes Hartmetall für zähe Bearbeitung Zweifach nutzbare Schneide für hohe Wirtschaftlichkeit Rhombisch 16 mit 80° Spanwinkel für Standardhalter Mit zylindrischem Loch, geeignet für gesicherte Befestigung Eckenradius 1,6 mm für robuste Kantenstabilität Hohe Prozesssicherheit durch robuste Schneidstofftechnik Die Kombination aus CVD-beschichtetem Hartmetall und der Sortenkennzeichnung T9235 sorgt für stabile Spanbildung bei Stahlbearbeitung. Dadurch reduziert sich das Risiko von Bruch und Ausbrüchen gerade bei schwankender Stabilität der Aufspannung. Anwender profitieren von längeren Standzeiten und planbaren Werkzeugwechselintervallen, was die Durchsatzleistung in der Fertigung erhöht. Präzise Einsatzmöglichkeiten und Aufnahmekompatibilität Die rhombische Geometrie mit 80° Spanwinkel und Eckenradius 1,6 mm bietet eine gute Balance zwischen Stabilität und Schnittkraft. Die Platte ist zweifach nutzbar, was die Wirtschaftlichkeit erhöht, und verfügt über ein zylindrisches Loch zur sicheren Befestigung im Halter. Ein Freiwinkel von 0° verlangt eine stabile Aufspannung und ist ideal, wenn eine neutrale Anstellbedingung für kontrollierte Schnittrichtungen gewünscht ist. Vorteil für Werkstatt und Produktion bei instabilen Schnitten Für Betriebe, die Stahl mit niedriger Schnittgeschwindigkeit und unterbrochenen Schnitten bearbeiten, bietet diese Ausführung eine zuverlässige Lösung. Dank ISO-Norm und typischer Abmessungen lässt sich die Platte unkompliziert in vorhandene Systeme integrieren. Die gezielte Auswahl eines passenden Spanbrechers und Halters erhöht die Oberflächengüte und minimiert Nacharbeit. Empfehlung: Fragen Sie die CNMG160616 T9235 Wendeplatte von Tungaloy bei Metav Werkzeuge an oder fordern Sie technische Beratung und Muster zur Prozessabsicherung per E‑Mail an: info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Bezeichnung: CNMG160616 Artikelnummer: 6785868 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6785868 Fakten Radius: 1,6 mm Plattendicke: 6,35 mm Plattengröße: 16 mm Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD Sorte: T9235 (zäh, für Stahl, niedrige Schnittgeschwindigkeit) Spanbrecher: doppelseitig Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der CNMG160616 T9235 bearbeiten? Die CNMG160616 T9235 von Tungaloy ist speziell für Stahl ausgelegt und zeigt ihre Stärken bei niedriger Schnittgeschwindigkeit sowie bei instabilen oder unterbrochenen Schnitten. Ist die Platte beidseitig nutzbar? Ja, die CNMG160616 T9235 ist doppelseitig nutzbar, wodurch die Standzeit pro Einsatz deutlich erhöht und die Wirtschaftlichkeit verbessert wird. Welche Bedeutung hat der Freiwinkel von 0° bei dieser Wendeplatte? Ein Freiwinkel von 0° bedeutet eine neutrale Anstellbedingung, die eine stabile Aufspannung erfordert; im Gegenzug ermöglicht sie kontrollierte Schnittkräfte bei anspruchsvollen Bearbeitungen. Wie beeinflusst die CVD-Beschichtung die Leistung der Wendeplatte? Die CVD-Beschichtung verbessert die Verschleißfestigkeit und trägt zu einer stabilen Spanbildung bei, besonders vorteilhaft bei zäher Sortierung wie T9235 in der Stahlbearbeitung. Welche Halter passen zur CNMG160616 T9235? ISO-konforme Außenhalter oder Bohrstangen mit passendem Form- und Spannsystem sowie korrekter Toleranzklasse sind geeignet; die Kompatibilität bestimmt sich über Form, Freiwinkel, Befestigung, Größe und Dicke. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 190608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, a precise 0.8 mm nose radius, and ISO compatibility for consistent turning performance; these properties support reliable material removal and repeatable surface finish. Order the CNMG190608-TM AH120 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 190608 AH120 ISO indexable turning insert, PVD-coated carbide by Tungaloy The CNMG190608-TM AH120 is an ISO rhombic indexable insert for turning, designed for external and internal operations where a sharp cutting edge and process security are required. PVD-coated, wear-resistant AH120 grade ISO rhombic CNMG, 19 mm size 0.8 mm nose radius for precise finishes Cylindrical hole for secure clamping Consistent cutting for demanding turning tasks The PVD-coated AH120 grade delivers a balance of wear resistance and edge toughness that supports stable metalcutting across mixed workloads. As a PVD-coated carbide insert with a TM chipbreaker, the component reduces flank wear while maintaining a sharp cutting edge, which helps to prolong insert life and keep cycle times predictable. In practice, this means fewer interruptions for tool changes and more consistent part quality during series production. Compatibility and secure mounting explained Compatibility with a toolholder depends on the insert form, relief angle (0°), tolerance class, fastening method, size and thickness. The rhombic CNMG form with an 80° included angle and a cylindrical hole provides firm, repeatable clamping in matched CNMG holders or boring bars. Choosing a holder that matches the 19 mm inscribed circle and 6.35 mm thickness ensures correct seat contact and torque transmission, which is essential for process stability during heavy cuts or interrupted turning. Precision geometry that supports surface finish A 0.8 mm nose radius produces a fine balance between strength and finish: it is large enough to resist local chipping yet small enough to achieve tight dimensional control on turned parts. The insert geometry, combined with the TM chipbreaker, helps to form manageable chips and reduces the risk of rubbing or built-up edge, which in turn supports repeatable surface roughness and dimensional conformity across batches. Grade and chipbreaker selection for specific jobs The AH120 grade is formulated for applications where both edge sharpness and process reliability are required. The TM chipbreaker suits general-purpose turning and enhances chip control in a wide range of materials; for optimised performance, match the chipbreaker and grade to the workpiece material and machine stability. This targeted selection reduces tool consumption and often improves overall machining economy. Request application advice from Metav Werkzeuge for the Tungaloy CNMG190608-TM AH120 insert to confirm holder compatibility and to select the optimal chipbreaker and cutting parameters for the intended turning operation Technical Data Article number: 6811657 Manufacturer article number: 6811657 SKU: 6811657-Tungaloy Manufacturer SKU: TUN6811657 Facts Inscribed circle (size): 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Special features PVD-coated carbide, grade AH120 Chipbreaker: TM Shape: rhombic CNMG Hole: with cylindrical hole Series: ISO turning indexable inserts Application: turning (external and internal) Material: carbide FAQ What applications are suitable for this insert? The CNMG190608-TM AH120 Tungaloy insert is intended for external and internal turning operations where a sharp cutting edge and process security are needed; choose the chipbreaker and grade according to the workpiece material and machining stability. How is the insert secured in the holder? The insert features a cylindrical hole and must be used with a compatible CNMG holder; compatibility depends on form, relief angle, tolerance class, fastening method, size (19 mm) and thickness (6.35 mm). What does the AH120 grade and PVD coating provide? The AH120 designation indicates a PVD-coated carbide grade designed for wear resistance and resistance to chipping, supporting longer tool life and consistent cutting performance in turning. When is the TM chipbreaker recommended? The TM chipbreaker is suitable for general turning tasks that require reliable chip control and stable cutting conditions; it helps to produce continuous, manageable chips and supports consistent surface finish. How do geometry and radius affect results on the workpiece? The 80° included angle and 0.8 mm nose radius balance strength and precision: the geometry resists edge failure while allowing good dimensional control and surface quality in routine turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com