CNMG 190608 T9205 Wendeplatten - Tungaloy
CNMG 190608 T9205 – Tungaloy-Wendeplatte für Drehen Die CNMG190608-TM T9205 ist eine ISO-genormte Drehwendeschneidplatte für produktives Außen- und Innendrehen von Stahl unter stabilen Schnittbedingungen ISO-genormte CNMG-Ausführung, hohe Austauschbarkeit CVD-beschichtetes Hartmetall für längere Standzeit Spanbrecher TM für kontrollierte Spanbildung Rhombische Platte mit zylindrischem Loch für sichere Befestigung Eckenradius 0,8 mm für präzise Konturengestaltung Effiziente Zerspanung bei Stahl für höhere Produktivität Dank der T9205-Beschichtung und dem verschleißfesten Hartmetall ermöglicht diese Wendeschneidplatte eine produktive Bearbeitung von Stahl bei erhöhten Schnittgeschwindigkeiten. Anwender profitieren von konstanter Standzeit und stabiler Spanbildung, was Rüstzeiten reduziert und Ausschuss minimiert. Die Kombination aus robuster Substanz und moderner CVD-Schicht sorgt für zuverlässige Ergebnisse bei Serienfertigung und Einzelfertigung gleichermaßen. Robuste Beschichtung und der praktische Nutzen für den Betrieb Die CVD-Beschichtung verbessert die Verschleißfestigkeit und die Widerstandsfähigkeit gegen thermische Beanspruchung. Für Anwender bedeutet das: weniger Werkzeugwechsel, planbarere Werkzeugkosten und höhere Maschinenauslastung. Der Spanbrecher TM ist auf kontrollierte Spanformung ausgelegt, wodurch Spanmanagement und Oberflächengüte in vielen Prozessen vereinfacht werden. Passgenauigkeit, Normen und Einsatzhinweise Die Platte ist ISO-genormt; die Kompatibilität zum Halter wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Achten Sie bei der Auswahl des Außenhalters auf den Freiwinkel von 0° und die rhombische Form mit zylindrischem Loch, um sichere Spann- und Kraftübertragung zu gewährleisten. Für optimale Ergebnisse sollten Stabilität der Aufspannung und geeignete Schnittwerte berücksichtigt werden. Zielgruppe und Anwendungsfeld: wer profitiert besonders Entwickelt wurde die Platte für Zerspaner in Werkstätten und Produktionsbetrieben, die Stahl effizient und reproduzierbar bearbeiten möchten. Besonders geeignet ist sie für Anwender mit stabilen Bearbeitungsbedingungen, Serienprozesse und Aufträge mit hohem Fokus auf Produktivität und Werkzeugstandzeit. Die Platte eignet sich gleichermaßen für Außen- wie Innendrehen und lässt sich in gängige Haltersysteme mit entsprechender ISO-Kennzeichnung integrieren. Empfehlung: Für produktives Drehen unter stabilen Bedingungen die CNMG190608-TM T9205 von Tungaloy über Metav Werkzeuge wählen; bei Beratungsbedarf oder Detailfragen kontaktieren Sie bitte info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6785734 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CNMG190608-TM Hersteller SKU: TUN6785734 Fakten Eckenradius: 0,8 mm Plattendicke: 6,35 mm Plattengröße: 19 mm Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: T9205 (CVD-beschichtet) Sorte: T9205 Spanbrecher: TM Plattenform: rhombisch Lochstil: zylindrisches Loch mit Loch ISO-genormte Drehwendeschneidplatten Anwendung: Drehen Einsatz: Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die CNMG190608-TM T9205 von Tungaloy ist insbesondere für die Bearbeitung von Stahl ausgelegt; die Sorte T9205 wurde für produktives Drehen unter stabilen Bedingungen entwickelt und bietet gute Standzeit bei erhöhten Schnittgeschwindigkeiten. Wie beeinflusst der Spanbrecher TM die Bearbeitung? Der Spanbrecher TM sorgt für kontrollierte Spanformung, erleichtert das Spanmanagement und trägt zu konstanter Oberflächengüte bei; dadurch werden Ausfallzeiten durch Spanprobleme reduziert. Worauf ist bei der Halterkompatibilität zu achten? Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; für die CNMG190608-TM ist ein Halter mit passender CNMG-Aufnahme und zylindrischem Schraubenloch erforderlich. Was bedeutet CVD-beschichtetes Hartmetall konkret für die Praxis? CVD-Beschichtung erhöht die Verschleißfestigkeit und thermische Beständigkeit; in der Praxis führt das zu längeren Standzeiten und planbareren Werkzeugwechselintervallen bei der CNMG190608-TM T9205. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die Wendeschneidplatte ist für Außen- und Innendrehen gedacht; die rhombische Form und der Eckenradius 0,8 mm ermöglichen präzise Konturarbeit in beiden Einsatzbereichen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 190608 T9215 TM Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and robust 80° rhombic geometry to boost productivity in medium-steel turning; the 0.8 mm corner radius balances surface finish and edge strength for continuous to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 190608 T9215 rhombic turning insert — CVD-coated carbide, 80° geometry — Tungaloy CNMG 190608 T9215 is an ISO-format rhombic insert designed for general turning applications in medium steels, offering high wear resistance and stable performance in productive machining. CVD-coated carbide for long tool life 80° rhombic geometry for versatile turning 0.8 mm corner radius for reliable finishes Cylindrical hole for secure clamping Durable coating that sustains productive turning The CVD-coated carbide grade T9215 provides a balance of wear resistance and fracture toughness, making it especially suitable for medium steel machining where sustained cutting and occasional light interruptions occur. The chemical vapour deposition layer increases resistance to abrasive wear and thermal stress, which in turn prolongs the useful life of the insert and reduces tool-change frequency. For production environments this means fewer interruptions and a more consistent output. Geometry and edge design for consistent surface quality The rhombic 80° geometry combined with a 0.8 mm corner radius delivers a compromise between rigidity and surface finish: the acute edge permits efficient metal cutting on profiles and shoulders, while the corner radius supports a stable cutting edge that reduces vibration and improves finish quality. The TM chipbreaker suits both continuous and slightly interrupted feeds, simplifying parameter selection for operators and enabling repeatable results across batches. Compatibility and secure clamping in ISO systems As an ISO-standard turning insert, compatibility is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole and supplied clamping systems ensure a positive, reproducible seat in standard CNMG pockets. This repeatability reduces setup time and supports predictable cutting forces, which is particularly valuable when integrating the insert into pre-assembled tool systems or when alternating between different machine-day shifts. Practical benefits for shop-floor decision making Choosing this grade and geometry supports higher productivity through lower wear and fewer edge failures, while also offering predictable reconditioning intervals. The combination of CVD coating and a robust substrate helps maintain dimensional stability during longer cuts, reducing rework and inspection cycles. For operations that balance throughput and component quality, the insert’s characteristics enable safer process windows and more consistent part tolerances. For reliable medium-steel turning with original Tungaloy quality, request further application data or order CNMG 190608 T9215 inserts through Metav Werkzeuge — Metav Werkzeuge can advise on insert-to-holder compatibility and availability. Technical data Article number: 6773858 SKU: 6773858-Tungaloy Manufacturer article number: TUN6773858 Model series: ISO-Drehwendeschneidplatten Core dimensions ISO designation: 190608 Insert form: rhombic, 80° Size: 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Features and application Material: carbide Coating / grade: T9215 (CVD-coated carbide) Chipbreaker: TM Hole: with cylindrical hole Typical application: turning (outside and inside) Suitable for: medium steel machining, continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The CNMG 190608 T9215 insert is optimised for medium steels; the T9215 CVD-coated carbide combines wear resistance with toughness for stable performance in those materials. How does the TM chipbreaker influence cutting parameters? The TM chipbreaker on this rhombic insert produces predictable chip control in continuous and lightly interrupted cuts, allowing for stable feeds and reduced risk of built-up edge when using the CNMG 190608 T9215 insert. Is the insert compatible with standard CNMG toolholders? Yes. The CNMG 190608-TM follows ISO geometry and fits toolholders designed for CNMG inserts, with the cylindrical hole ensuring secure clamping and repeatable seating. Can this insert be used for finishing and roughing operations? The 0.8 mm corner radius and grade make the insert suitable for finishing where a good surface is required and for light roughing in medium steel, offering a balance between finish quality and edge robustness. How does the CVD coating affect tool life compared with uncoated grades? The CVD coating on the T9215 grade improves resistance to abrasive and thermal wear, typically extending tool life in steel turning applications compared with uncoated carbides, which supports higher productivity and fewer tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a 0.8 mm nose radius and ISO compatibility for efficient medium-steel turning. The robust T9215 grade delivers high wear resistance and toughness for continuous to slightly interrupted cuts—order via Metav Werkzeuge or consult our technical team for further integration advice. CNMG 190608 T9215 – ISO turning insert (CVD-coated carbide) by Tungaloy CNMG190608-TM T9215 is an ISO-standard rhombic turning insert engineered for productive external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness CVD-coated carbide grade T9215 Optimised for medium steel turning Rhombic CNMG 80° cutting geometry 0.8 mm nose radius, 6.35 mm thickness Reliable performance for productive turning The CNMG190608-TM combines a CVD-coated surface with a hard carbide substrate to deliver consistent wear resistance and enhanced toughness during machining. This combination reduces flank wear under continuous to slightly interrupted cuts, allowing longer tool life and fewer index changes. As an ISO-standard insert, it supports a predictable process window when paired with a compatible holder, helping to increase cycle times and lower per-part tooling cost without sacrificing cutting stability. Controlled chip formation for process security The integrated chipbreaker TM is designed for reliable chip control when machining medium steel grades, promoting uniform chips and a cleaner working environment. Improved chip behaviour contributes directly to better surface finish on the workpiece and reduces the risk of packing or tool damage during longer runs. The result is higher overall productivity: fewer stoppages for chip clearing and more stable tool life, which supports consistent part quality in batch and series production. Simple integration and clear specification for setups Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the insert fits common ISO CNMG holders when these parameters align. Key dimensions are 19 mm across, 6.35 mm thickness and a 0.8 mm nose radius, with an 80° included angle and 0° relief. The rhombic geometry with a cylindrical hole enables secure clamping and repeatable seating. For users seeking a robust indexable solution, this specification set simplifies holder selection and reduces setup variability when integrating a new grade into established turning processes. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for stock and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773875 Manufacturer SKU: TUN6773875 SKU: 6773875-Tungaloy Model series: ISO turning indexable inserts Designation: CNMG190608-TM Core data Insert size: 19 mm Thickness: 6.35 mm Nose radius: 0.8 mm Included angle: 80° Relief angle: 0° Design and features Shape: rhombic Hole style: cylindrical hole Coating/material: CVD-coated carbide, grade T9215 Chipbreaker: TM Application: Turning (external and internal) FAQ What materials is this insert suitable for? The CNMG190608-TM T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to slightly interrupted cuts. What is the purpose of the TM chipbreaker? The TM chipbreaker on this Tungaloy insert improves chip control and helps maintain a consistent surface finish, reducing the risk of chip-related interruptions during long production runs. How is compatibility with holders ensured? Compatibility is defined by the CNMG form and parameters such as relief angle, tolerance class, fastening, size and thickness; the CNMG190608 designation ensures a match with standard ISO CNMG holders when these criteria are met. Which dimensions and geometry are relevant for setup? Key specifications to consider are the 19 mm size, 6.35 mm thickness, 0.8 mm nose radius and 80° included angle; the rhombic shape and cylindrical hole support secure clamping and repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190608 T9225 TM Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and a robust TM chipbreaker for consistent mid- to heavy-duty steel turning; the ISO CNMG 190608 form and 0.8 mm corner radius provide process stability and good surface finish. Order the insert directly via Metav Werkzeuge or consult the technical advisers for fitment and availability. CNMG 190608 T9225 indexable turning insert (TM chipbreaker) by Tungaloy A CNMG 190608-TM T9225 indexable insert engineered for medium to heavy steel turning, offering a balance of toughness and wear resistance for variable cutting conditions. CVD-coated carbide grade T9225 Optimised TM chipbreaker Suitable for mid to heavy steel turning ISO CNMG 190608, 80° rhombic Reliable performance for demanding turning operations The insert is manufactured from carbide with a CVD coating in grade T9225, designed to deliver increased wear resistance and stable edge life under varying cutting conditions. This makes it a suitable choice when operations switch between continuous and slightly interrupted cuts, where a tougher grade prevents premature chipping. The result is fewer tool changes and more consistent cycle times, supporting higher productivity on batch and series production runs. Precision geometry that matches standard holders Built to the ISO CNMG 190608 specification, the insert uses an 80° rhombic geometry and a corner radius 0.8 mm, offering a robust cutting edge that improves surface integrity and reduces vibration risk. The 0° clearance and cylindrical hole ensure secure seating in compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The 6.35 mm plate thickness contributes to rigidity, helping to maintain cutting stability and repeatable dimensional results. Economical choice that reduces downtime and risk The TM chipbreaker is optimised for reliable chip control in steel and assists in producing a consistent chip form across a range of feeds and depths, reducing the likelihood of machine stoppages. As part of a system comprising the insert, a matching external holder or boring bar, support shim/clamping set and replacement screws, this solution lowers cost per cutting edge through multiple indexings and straightforward replacement. The combination of toughness and wear resistance makes this insert a practical, cost-effective component for workshops seeking dependable production performance. For robust, versatile turning select the Tungaloy CNMG 190608-TM T9225 indexable insert and contact Metav Werkzeuge for availability and tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6780735 Manufacturer SKU: TUN6780735 SKU: 6780735-Tungaloy Model series: ISO-Drehwendeschneidplatten Data Corner radius: 0.8 mm Insert size: 19 mm Plate thickness: 6.35 mm Angle: 80° Clearance angle: 0° ISO code: 190608 Special features Material: carbide Coating/grade: T9225 (CVD-coated) Chipbreaker: TM Geometry: rhombic with cylindrical hole Application: turning (external and internal) System: insert plus compatible holder, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The CNMG 190608-TM T9225 insert from Tungaloy is formulated for steel machining, especially medium to heavy-duty operations where toughness and stable chip control are required. How does the TM chipbreaker affect performance? The TM chipbreaker on the Tungaloy insert promotes consistent chip formation in steel turning, improving surface finish and reducing the chance of chip-related interruptions. Which holders are compatible with ISO CNMG 190608 inserts? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG 190608 shape fits standard ISO CNMG external and internal holders designed for an 80° rhombic insert. What is the corner radius and why does it matter? The insert has a 0.8 mm corner radius, which balances edge strength and surface finish—larger radii increase robustness, while smaller radii can produce finer detail. Can this insert handle interrupted cuts? Yes, the carbide grade T9225 is tuned for increased toughness, making the insert suitable for slightly interrupted cuts and varying engagement conditions when turning steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190608 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade and an ISO‑standard rhombic form for consistent medium to heavy steel turning. The combination of the T9225 grade and the TM chipbreaker ensures stable chip control under varying engagement conditions. Order original inserts directly via Metav Werkzeuge or consult the team for application matching. CNMG 190608 T9225 — Turning insert (ISO CNMG190608) by Tungaloy CNMG190608-TM T9225 Tungaloy‑Wendeplatte is a CVD‑coated carbide indexable insert designed for medium to heavy turning applications CVD‑coated carbide for robust cutting Universal grade for medium to heavy steel ISO CNMG shape 80° rhombic insert Cylindrical hole for secure clamping High‑performance grade for reliable steel turning The T9225 grade is a CVD‑coated carbide formulation engineered as a robust universal solution for turning steel under medium to heavy cutting conditions. The coating provides a hard, wear‑resistant surface while the carbide substrate maintains toughness where interrupted cuts or variable engagement occur. As a result, the insert offers extended tool life and consistent surface quality when the process demands a balance of wear resistance and fracture protection. The presence of the TM chipbreaker optimises chip formation for many steels, reducing manual chip handling and improving cycle stability. ISO form and secure clamping for predictable tool performance Constructed to the ISO CNMG geometry with an 80° included angle and a rhombic profile, this indexable insert is compatible with standard CNMG holders when the form, clearance angle, tolerance class, fixing method, size and thickness match. The cylindrical hole supports positive, repeatable clamping with standard screws and clamps; correct matching to the toolholder secures stability and repeatable part quality. The nominal corner radius 0.8 mm provides a good compromise between strength and edge definition, aiding dimensional control on external and internal turning. Process benefits: productivity, chip control and reduced machining risk Using a CVD‑coated, universal grade like T9225 reduces downtime associated with frequent insert changes in mixed‑batch production. The coating resists flank and crater wear while the substrate tolerates shock loads, which is particularly useful in slightly interrupted cuts. The TM chipbreaker supports short, manageable chips for typical steel grades, improving surface finish and reducing the risk of chip entanglement. These technical choices translate directly into higher process security, fewer reworks and a more predictable production rhythm. Contact Metav Werkzeuge to specify the correct CNMG190608 insert for particular steel grades or machining strategies and to arrange delivery of genuine Tungaloy inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780894-Tungaloy Manufacturer article number: 6780894 Manufacturer SKU: TUN6780894 Model series: ISO‑Drehwendeschneidplatten Label: CNMG190608-TM T9225 Tungaloy-Wendeplatte Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Special features CVD‑coated carbide Grade: T9225 Chipbreaker: TM Rhombic plate form (CNMG) Cylindrical hole Intended application: Drehen (turning) ISO‑standard insert for CNMG holders Compatibility determined by form, clearance angle, tolerance, fixing, size and thickness FAQ What materials is this insert best suited for? The CNMG190608‑TM in grade T9225 is optimised for medium to heavy turning of steel, offering a balance of wear resistance and toughness for varying engagement conditions. How does the TM chipbreaker influence cutting performance? The TM chipbreaker promotes short, controllable chips and improved surface quality during steel turning with the CNMG190608 insert, aiding process stability and chip evacuation. Which holder characteristics determine compatibility with this ISO insert? Compatibility is defined by the holder’s form, clearance angle, tolerance class, fixing method, size and thickness; matching these to the CNMG190608 geometry ensures secure clamping and repeatable performance. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, suitable for general turning tasks where robustness and dimensional control are required. Is this an original Tungaloy product and how is authenticity indicated? This is an original Tungaloy indexable insert (CNMG190608‑TM, grade T9225) identified by the manufacturer article number 6780894 and the manufacturer SKU TUN6780894 Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190608 T9235 Wendeplatten - Tungaloy
Benefit from the secure combination of the CVD-coated carbide grade T9235, the TM chipbreaker and the ISO CNMG form for dependable turning performance in unstable or interrupted-cut conditions; order this insert directly via Metav Werkzeuge or consult our technical advisors for holder and parameter selection. CNMG 190608 T9235 — CNMG ISO Turning Insert (CVD-coated, TM chipbreaker) by Tungaloy CNMG190608-TM T9235 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for steel machining where interrupted cuts or limited rigidity require a tough, reliable grade. CVD-coated carbide grade T9235 TM chipbreaker for interrupted cuts ISO CNMG form 190608, rhombic shape With cylindrical hole and 0° clearance angle Consistent performance for unstable turning conditions The combination of a CVD-coated carbide substrate and the T9235 grade delivers a balance of toughness and wear resistance tailored to turning applications on steel at lower cutting speeds. In practice, this means the insert tolerates shocks and variable engagement better than harder, more brittle grades, reducing the risk of premature edge breakage during interrupted cuts. The rhombic ISO CNMG form with a corner radius of 0.8 mm provides a predictable cutting geometry that supports both finishing and light roughing, while the 0° clearance angle helps maintain positive cutting action in marginal setups. Improved chip control and longer tool life with TM chipbreaker The TM chipbreaker is engineered to manage chip formation under unstable cutting conditions. By controlling chip curl and evacuation, the chipbreaker reduces the likelihood of chip entanglement and workpiece rework, which supports a more consistent surface finish. As a result, there is a practical gain in process stability and tool life, particularly when machining interrupted features or less rigid assemblies. The design also helps moderate cutting forces, which contributes to predictable tool wear and simpler parameter optimisation during process setup. ISO compatibility and system-level reliability Adherence to ISO dimensions ensures this insert integrates with standard CNMG holders and bar systems; compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness. The insert’s cylindrical hole and defined thickness of 6.35 mm permit secure clamping with common underlay and clamp sets, while replacement screws are easy to source. For a complete cutting system, pair the insert with a properly rated external holder or boring bar and check that the TM chipbreaker and T9235 grade match the chosen feed, depth of cut and machine rigidity. This system-focused approach reduces setup iterations and supports repeatable, productive turning cycles. For process-specific advice or to arrange delivery of the CNMG190608-TM T9235 insert, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored holder recommendations and machining parameter support. Technical data Article number: 6785921 Manufacturer SKU: TUN6785921 Brand: Tungaloy Designation: CNMG190608-TM T9235 Model series: ISO-Drehwendeschneidplatten Core specifications Insert size: 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 80° ISO code: 190608 Materials & special features Material: carbide Coating: CVD Grade: T9235 Chipbreaker: TM Shape: rhombic (CNMG) Hole style: cylindrical hole Application: external and internal turning Best for: steel, unstable conditions, interrupted cuts System: ISO insert, compatible holders, underlay/clamp set, replacement screws FAQ What materials is this insert best suited for? The CNMG190608-TM T9235 insert is optimised for steel machining; the T9235 grade and CVD coating provide toughness and wear resistance appropriate for lower cutting speeds and interrupted cuts. Can this insert be used for both external and internal turning? Yes. The rhombic CNMG form and the 0° clearance angle make the insert suitable for both external and internal turning operations when paired with the correct holder and clamping system. How does the TM chipbreaker affect machining? The TM chipbreaker improves chip control during interrupted and unstable cuts, leading to more consistent surface finish and reduced risk of chip-related incidents, which helps extend effective tool life. What dimensions and features ensure holder compatibility? Holder compatibility depends on form, clearance angle, tolerance class, fixation, size (19 mm) and thickness (6.35 mm); the insert’s cylindrical hole also aligns with standard clamping designs for secure fixing. Is this an original Tungaloy product and how is it identified? Yes, the insert is an original Tungaloy indexable insert identified as CNMG190608-TM T9235 with article number 6785921 and manufacturer SKU TUN6785921. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190608 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 for dependable performance in unstable cutting conditions and interrupted cuts; the 80° rhombic geometry with a 0.8 mm nose radius ensures robust edge strength and predictable surface finish — order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. CNMG 190608 T9235 Turning insert — 80° rhombic, 0.8 mm radius, Tungaloy CNMG 190608 T9235 is a CVD-coated carbide turning insert designed for ISO-compliant external and internal turning where toughness and edge stability are required CVD-coated carbide grade T9235 80° rhombic geometry for versatile turning 0.8 mm nose radius for robust finishing Suitable for unstable and interrupted cuts High-efficiency cutting where interrupted or unstable cuts occur The CVD-coated carbide grade T9235 has been selected for its toughness and wear resistance at moderated cutting speeds, making it particularly suitable for operations with interrupted engagement or less rigid setups. The combination of a resilient substrate and a controlled coating system reduces premature edge chipping, so machining cycles run with fewer unplanned tool changes. This results in a measurable improvement in machining throughput where process stability is critical. Precise geometry and secure mounting for predictable results The insert’s 80° rhombic form and 0.8 mm nose radius deliver a balance between strength and finish; the rhombic profile allows flexible approach angles while the fine radius supports consistent surface quality. Compatibility with toolholders is determined by insert shape, clearance angle, tolerance class, fixing method, size and thickness — the ISO-format ensures straightforward selection of matching holders, shims and replacement screws. The insert is supplied with a cylindrical hole for positive locating and secure clamping. Durable edge life and controlled chip formation for cost-effective production Equipped with the TM chipbreaker and the durable T9235 grade, the insert supports stable chip control across a range of steel machining tasks, reducing time lost to recut or rework. The CVD coating contributes to adhesion and abrasive wear resistance, extending tool life under application-relevant feeds and speeds. Fewer tool changes and predictable performance translate into lower process costs and increased machine uptime for batch and single-piece production alike. Practical application guidance for selecting the right system Use this ISO-format indexable insert primarily for turning operations on steel where interrupted cuts or limited machine rigidity are present. Match the insert to a compatible outer holder or boring bar, and select the correct shim and clamping set for the holder system in use. When in doubt about holder compatibility or optimal cutting parameters, request the holder specification (form, relief angle and clamp type) to ensure correct selection and safe clamping behaviour; this approach supports repeatable results and reduces setup time. For reliable turning with Tungaloy’s T9235 grade and to discuss toolholder compatibility or application optimisation, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to receive tailored advice and ordering information Technical data Article number: 6785977 Manufacturer SKU: TUN6785977 SKU: 6785977-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG190608-TM T9235 Tungaloy-Wendeplatte Facts Size: 19 mm Thickness: 6.35 mm Included hole: with hole (cylindrical hole) Cutting edge angle: 80° Nose radius: 0.8 mm Clearance/freiwinkel: 0° Special features Material: carbide Coating: CVD-coated carbide Grade: T9235 Chipbreaker: TM Plate form: rhombic ISO designation: CNMG190608-TM Typical application: turning (external and internal) FAQ Is this insert compatible with standard CNMG holders? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the ISO format of the CNMG190608-TM insert simplifies selection of matching CNMG holders Which materials is the insert best suited for? The T9235 grade is formulated for machining steel, especially where a tough grade is needed for interrupted cuts or less rigid setups What benefit does the TM chipbreaker provide? The TM chipbreaker promotes controlled chip formation for turning operations, improving stability and reducing the risk of built-up edge during intermittent cutting How does the 0.8 mm nose radius affect surface finish and strength? A 0.8 mm nose radius offers a compromise between edge strength and surface finish, giving robust performance for finishing and light profiling while preserving tool life Can the CVD coating extend tool life under high feed conditions? The CVD-coated surface increases resistance to abrasive wear and adhesion, which supports longer edge life under the moderate to higher feed rates suitable for the T9235 grade Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant AH120 grade, a PVD-coated carbide substrate and the balanced 1.2 mm corner radius for reliable turning performance and repeatable tool life; order directly via Metav Werkzeuge or ask our consultants for matching holders and chipbreakers. CNMG190612 AH120 Turning Insert, PVD-coated Carbide — Tungaloy CNMG190612 AH120 is an ISO indexable turning insert designed for precision external and internal turning where a sharp cutting edge and process security are required. PVD-coated grade AH120 for edge stability Rhombic CNMG form with 80° included angle 1.2 mm corner radius for balanced edge strength Double-sided insert with cylindrical hole Consistent cutting performance for secure production The ISO series of indexable turning inserts offers a dependable basis for machining where stability and repeatable performance matter. The PVD-coated carbide of this insert provides enhanced wear resistance and improved thermal stability, making it suitable where a consistently sharp edge is required. The AH120 grade is formulated for resistance to both abrasive wear and edge chipping, delivering process security during continuous turning tasks. Using a grade with these properties reduces unscheduled tool changes and supports a steady production flow. Geometry and compatibility explained for easy selection The insert follows the ISO designation CNMG190612 with a rhombic plate geometry and an 80° geometry, giving a versatile approach angle for a range of turning operations. A 1.2 mm corner radius balances edge strength and surface finish, while the 6.35 mm thickness and 19 mm size support stable clamping in standard external holders and boring bars. The insert is double-sided and features a cylindrical hole for secure mounting. Compatibility with a specific holder depends on shape, clearance angle, tolerance class, fastening method, size and thickness; the complete system comprises the insert, the matching external holder or boring bar, the shim/clamp set and replacement screws. Practical shop-floor benefits and economical use Using a rhombic ISO insert with a sharp, coated cutting edge allows productive turning with predictable results: fewer interruptions, consistent surface quality and effective chip control when the appropriate chipbreaker is chosen. The double-sided design increases usable life per index and lowers tooling cost per component, while the PVD-coated surface maintains edge integrity under varying speeds and feeds. For operations that demand a combination of sharpness and reliability, this insert supports high process uptime and simplifies inventory through ISO conformity. Discuss suitability of the Tungaloy CNMG190612 AH120 PVD-coated insert with Metav Werkzeuge; our consultants can advise on the optimal chipbreaker and holder and arrange supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6811659 SKU: 6811659-Tungaloy Manufacturer SKU: TUN6811659 Manufacturer article number: 6811659 Model series: ISO-Drehwendeschneidplatten Designation: CNMG190612 AH120 Manufacturer: Tungaloy Core data Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 19 mm Special features PVD-coated carbide Grade AH120 — wear- and breakage-resistant Rhombic plate form (CNMG) Cylindrical hole for secure mounting Double-sided chipbreaker Application: turning (external and internal) ISO designation: CNMG190612 System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What types of turning operations suit this insert? This insert is intended for external and internal turning operations; the CNMG190612 AH120 element is designed where a sharp cutting edge and process security are required. How does the AH120 grade affect tool life? The AH120 grade with its PVD-coated carbide construction improves resistance to abrasive wear and edge chipping, which contributes to longer, more predictable tool life for turning tasks. What are the key geometric parameters to check for holder compatibility? Check the insert form, clearance angle (0°), tolerance class, fastening type, plate size (19 mm) and thickness (6.35 mm) to ensure compatibility with the intended holder or boring bar. Is the insert indexed on both sides? Yes, the insert is double-sided, which increases the number of usable cutting edges and improves cost-efficiency per index. Which chipbreaker should be chosen? Select a chipbreaker that matches the workpiece material, the machining strategy and the required surface finish; the CNMG190612 AH120 insert performs best when the chipbreaker and grade are matched to the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH120 Wendeplatten - Tungaloy
Benefit from a combination of durable PVD-coated carbide, stable edge geometry and reliable chip control for consistent turning performance; order the CNMG190612 AH120 Tungaloy turning insert directly via Metav Werkzeuge or consult our experts if technical advice is required. CNMG190612 AH120 CNMG Turning Insert — PVD-coated carbide, 80° rhombic, 1.2 mm radius (Tungaloy) CNMG190612 AH120 is an ISO-standard rhombic insert for general external and internal turning applications, designed to deliver process security where a sharp cutting edge and reliable wear resistance are required. PVD-coated carbide for wear resistance 80° rhombic geometry for stable turning 1.2 mm corner radius for robust edge Double-sided chipbreaker with cylindrical hole Consistent machining through optimised grade and coating The insert combines a PVD-coated surface with a tough carbide substrate to extend tool life under machining loads. The AH120 grade is specified as wear- and chipping-resistant, which supports longer uninterrupted cycles and reduces tool change frequency. For shops seeking measurable gains in uptime, this results in a more predictable process and fewer unplanned pauses during production. The hardened coating also helps maintain a sharp cutting edge for superior surface finishes on turned components. Geometry that boosts stability and control With an 80° rhombic geometry and a 1.2 mm corner radius, the indexable insert provides a balance between edge strength and cutting performance. The geometry is particularly effective for medium to heavy cuts where tool rigidity matters; the larger contact area reduces edge deflection and improves dimensional stability. The double-sided chipbreaker contributes to controlled chip formation, simplifying evacuation and reducing the risk of re-cutting, which in turn helps achieve consistent part quality. Compatibility and system considerations for reliable assembly These ISO inserts are compatible with holders when matched by form, clearance angle, tolerance class, mounting style, size and thickness. The standardised designation (ISO 190612) and the rhombic shape ease selection of the appropriate outer holder or boring bar, plus the correct backing/clamping set and replacement screws where required. The insert includes a cylindrical hole and a plate thickness of 6.35 mm, enabling secure clamping and repeatable positioning across changeovers. Practical benefits for production and set-up Using an ISO-standard indexable insert streamlines inventory and reduces the complexity of tool planning. The combination of PVD coating and the AH120 grade delivers reliable performance across diverse turning tasks where a sharp cutting edge and process security are priorities. Shops benefit from fewer interrupts for edge-related failures and more consistent surface quality, while toolroom staff appreciate the standard dimensions that simplify assortment management. For process-reliable turning with Tungaloy’s AH120 grade, contact Metav Werkzeuge for ordering and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802295 Manufacturer SKU: TUN6802295 Manufacturer article number: 6802295 Numbers / Core technical data ISO designation: 190612 Plate form/shape: rhombic (CNMG) Included hole style: cylindrical hole Corner radius: 1.2 mm Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 19 mm Insert angle: 80° Designs / Special features Material: carbide Coating / grade: PVD-coated, AH120 Chipbreaker: double-sided System components: ISO insert, compatible outer holder or boring bar, backing/clamping set, replacement screws Application: turning (external and internal) FAQ What is the primary application for this insert? This insert is intended for turning operations, suitable for both external and internal turning where a sharp cutting edge and process security are required; the CNMG190612 AH120 Tungaloy insert is specified for such tasks. Which materials is the AH120 grade designed to handle? The AH120 grade is described as wear- and chipping-resistant, making the insert appropriate where durability and a stable cutting edge are needed; material-specific chipbreaker and grade selection are recommended depending on the workpiece. How is holder compatibility ensured for this ISO insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, mounting, size and thickness; the ISO designation and the stated dimensions (19 mm size, 6.35 mm thickness, cylindrical hole) aid correct holder selection for the CNMG190612 AH120. What geometry and edge specifications support process stability? The 80° rhombic geometry combined with a 1.2 mm corner radius provides edge strength and reduces deflection in medium to heavy cuts, while the double-sided chipbreaker promotes controlled chip formation. What are the key features of the PVD coating on this insert? The PVD-coated surface enhances wear resistance and helps maintain a sharp cutting edge for extended periods, contributing to fewer tool changes and more consistent surface finish when using the CNMG190612 AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide, ISO‑standard geometry, and robust chip control for reliable turning performance; order the CNMG190612 AH120 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG190612 AH120 CNMG turning insert by Tungaloy — PVD‑coated carbide, 80° geometry The CNMG190612 AH120 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a sharp, wear‑resistant cutting edge and dependable process stability. PVD-coated carbide grade AH120 Sharp, wear- and chipping‑resistant edge ISO‑standard rhombic CNMG190612 insert 80° geometry with 1.2 mm corner radius Double‑sided chipbreaker, cylindrical hole High‑performance turning through optimised grade and coating The AH120 grade is a PVD‑coated carbide engineered for combination demands of edge sharpness and process security; this results in consistent cutting forces and extended edge life under interrupted or continuous cuts. The coating reduces adhesion and thermal wear, meaning the insert maintains a stable cutting profile over longer cycles. For production environments where cycle time and tool life affect throughput, this grade supports a lower cost per component by reducing frequent indexings and tool changes. Geometry that delivers repeatable accuracy and surface finish An 80° cutting geometry combined with a 1.2 mm corner radius produces a wide contact area that improves stability during external and internal turning. The rhombic form ensures predictable chip flow and positional repeatability on indexable holders, which aids in achieving consistent surface quality. The moderate corner radius balances edge strength with finish capability, making the insert suitable for light to medium finishing passes without sacrificing robustness. Chip control and secure clamping for efficient machining Equipped with a double‑sided chipbreaker and a cylindrical locating hole, the insert supports effective chip shaping and secure clamping in compatible holders. The chipbreaker reduces the risk of built‑up edge and curling chips that can damage the workpiece or tool, while the hole style ensures positive seating and repeatable location during index changes. Together these features reduce machine downtime and help maintain a steady production flow. Compatibility, handling and practical benefits on the shop floor As an ISO indexable turning insert, compatibility with a suitable external holder or boring bar is determined by form, clearance angle, tolerance class, attachment type, size and thickness. The zero degree clearance angle and standard plate thickness of 6.35 mm simplify selection for many ISO holders. This indexable design reduces inventory complexity: spare plates and standard fastening hardware allow fast on‑machine replacement, improving uptime and simplifying tool management. Contact Metav Werkzeuge for precise holder recommendations, availability and to discuss the optimal AH120 grade for the intended turning application — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6802291 Manufacturer SKU: TUN6802291 SKU: 6802291-Tungaloy Model series: ISO indexable turning inserts Facts Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 80° Clearance angle: 0° Design & features PVD‑coated carbide grade AH120 Rhombic CNMG form Double‑sided chipbreaker Cylindrical locating hole for secure clamping ISO designation CNMG190612 Application: turning (external and internal) Compatibility determined by form, clearance, tolerance class, attachment, size and thickness FAQ What materials is this insert suitable for? The CNMG190612 AH120 insert is a PVD‑coated carbide grade designed for a broad range of materials where a sharp edge and process security are required; material selection should match the AH120 characteristics for optimal results. What are the key dimensional and geometric specifications? Key specifications include a 19 mm size, 6.35 mm thickness, 1.2 mm corner radius and an 80° geometry; these dimensions enable stable cutting and predictable seating in ISO holders. How does the chipbreaker affect machining performance? The double‑sided chipbreaker on this indexable plate shapes chips reliably and reduces the chance of built‑up edge, improving surface finish and tool life during continuous and interrupted cuts. Is this insert reversible or indexable? Yes, the CNMG190612 AH120 is double‑sided and indexable, allowing rotation to a fresh cutting edge to extend usable life before replacement. Which holders are compatible with this ISO insert? Compatibility requires a holder or boring bar matching the CNMG form, clearance angle, tolerance class, attachment method, size and thickness; Metav Werkzeuge can advise on exact holder matches for the AH120 grade and CNMG190612 designation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190612 AH120 Wendeplatten - Tungaloy
Optimise turning performance through the combination of a PVD‑coated AH120 grade for wear and edge stability and the ISO CNMG190612 form with an 80° geometry; order the insert via Metav Werkzeuge or consult our team for application advice. CNMG 190612 AH120 ISO turning insert, 80° geometry | Tungaloy A CNMG 190612 AH120 insert designed for reliable external and internal turning, offering a sharp cutting edge and improved process security in ISO‑standard tool systems PVD‑coated carbide AH120 for wear resistance ISO CNMG rhombic form with 80° cutting edge Double‑sided insert with cylindrical hole Stable chip control for dependable turning Consistent edge performance for longer cutting intervals The PVD‑coated AH120 grade combines a wear‑resistant surface finish with a tough carbide substrate to deliver predictable life and reduced downtime. A sharp cutting edge, backed by a stable microstructure, lowers the frequency of edge failures and preserves surface quality over extended runs. The 1.2 mm corner radius provides a reliable compromise between strength and finish quality, supporting steady tool life when the chipformer is matched to the workpiece and machining parameters. This leads to measurable productivity gains through fewer interruptions for insert changes and less scrap. ISO conformity and straightforward holder integration Built to ISO dimensions, the CNMG geometry with an 80° approach angle is compatible with common external holders and boring bars; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The rhombic shape and cylindrical hole enable repeatable seating and clamping, while the 6.35 mm thickness and 19 mm size provide robust support in moderate to heavy turning operations. Because the insert is double‑sided, both faces can be indexed to extend effective life, and the standard interface permits quick replacement without bespoke adaptors, reducing setup time in production cells. Practical benefits for process security and versatility Designed for turning tasks where a sharp corner and reliable cutting behaviour are required, this indexable insert supports stable chip formation and consistent surface finish when paired with the appropriate chipbreaker and holder. The CNMG190612 AH120 insert is supplied as part of a standard system consisting of an ISO insert, a matching external holder or boring bar, and the necessary clamping elements; this system approach simplifies inventory and tooling decisions. By selecting the correct chipbreaker profile and maintaining stable cutting conditions, process security is enhanced and the likelihood of unplanned stoppages is reduced. For proven process security and dependable tool life, choose the Tungaloy CNMG 190612 AH120 turning insert and contact Metav Werkzeuge for technical guidance or availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6811660 SKU: 6811660-Tungaloy Manufacturer item number: TUN6811660 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Cutting angle: 80° Special features Material: carbide Coating: AH120 (PVD) Shape: rhombic (CNMG) Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning System components: insert, matching holder/boring bar, clamping set and replacement screws FAQ What is the primary application for this insert? The CNMG 190612 AH120 Tungaloy insert is intended for external and internal turning operations within ISO‑compliant tool systems. What grade and coating are used on the insert? This insert uses a PVD‑coated AH120 carbide grade that is designed for wear resistance and process security in turning. Which dimensions and geometry are relevant for holder selection? Key dimensions are 19 mm size, 6.35 mm thickness, 1.2 mm corner radius and 80° cutting geometry; holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. How many usable cutting edges does the insert provide? The insert is double‑sided, allowing both faces to be indexed to extend productive life. What system components are recommended with the insert? Use a matching ISO external holder or boring bar, an appropriate underlay/clamp set and the specified replacement screws for secure, repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge, wide material applicability for rostfreie Stähle and ISO compatibility to keep turning operations productive and predictable; order genuine Tungaloy inserts or contact Metav Werkzeuge for application support. CNMG190612 AH6225 ISO turning insert — PVD-coated carbide, 80° rhombic — Tungaloy The CNMG190612 AH6225 is an ISO rhombic indexable insert for precision external and internal turning, designed to deliver a balance of cutting-edge sharpness and edge stability in varied machining conditions. PVD-coated carbide grade AH6225 80° rhombic shape, 19 mm size Double-sided chipbreaker, 1.2 mm corner radius Cylindrical-hole design for secure clamping Faster, more consistent cutting with PVD-coated carbide The combination of a PVD-coated surface and a carbide substrate in grade AH6225 provides a sharp yet robust cutting edge optimised for medium cutting conditions. This balance reduces built-up edge and promotes a predictable wear pattern when machining rostfreie Stähle, which in turn helps stabilise cycle times and surface finish. The coating acts as a thermal barrier and improves adhesion resistance, so the insert sustains performance under variable feeds and speeds without excessive edge rounding. Reliable chip control and application clarity for turning Built with a double-sided chipbreaker, the insert manages chip formation for common turning tasks, making it suitable for both roughing and semi-finishing when the correct break geometry is selected. A chipbreaker improves evacuation and reduces spindle load; explained simply, it directs and breaks chips into shorter curls, lowering the risk of entanglement and improving tool life. Use this insert in standard turning toolholders or boring bars compatible with ISO rhombic plates to exploit its chip control benefits. Secure seating and system compatibility reduce downtime An ISO-standard geometry plus the cylindrical hole ensure repeatable clamping and quick indexability in a wide range of holders; compatibility depends on form, relief angle, tolerance class, fastening arrangement, plate size and thickness. The 80° approach angle supports a versatile contact geometry that balances radial and axial cutting forces, while the 1.2 mm corner radius offers a compromise between edge strength and surface finish. These aspects make the insert straightforward to integrate into existing tool systems and help reduce set-up time. Predictable economics through tool-life and process stability The insert forms part of a system—holder, underlay/clamp set and fastening hardware—to deliver a stable cutting environment and predictable replacement intervals. Favourable wear characteristics of AH6225 can lower the overall cost per part by extending service intervals and maintaining surface quality without constant requalification. For manufacturers seeking reproducible results in serial production, this insert contributes to fewer process interruptions and a steady output quality. For application advice, to confirm holder compatibility or to source genuine Tungaloy CNMG190612 AH6225 turning inserts, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or phone +49 2822 7131930 — genuine inserts and expert guidance supplied by Metav Werkzeuge. Technical Data Article number: 6903174 Manufacturer SKU: TUN6903174 Shop SKU: 6903174-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CNMG190612 Designation: CNMG190612 AH6225 Tungaloy-Wendeplatte Facts Shape angle: 80° Plate size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical hole Special features Grade: AH6225 (PVD-coated carbide) Double-sided chipbreaker Rhombic plate form Suitable for rostfreie Stähle Application: Drehen FAQ What materials is this insert suitable for? The CNMG190612 AH6225 insert is designed primarily for machining rostfreie Stähle and can be used in varied stainless-steel turning tasks where a sharp, stable cutting edge is required. What does the AH6225 grade offer compared with general-purpose grades? AH6225 is a PVD-coated carbide grade optimised for a balance of sharpness and edge stability, delivering improved wear resistance and thermal behaviour in medium machining of rostfreie Stähle. Is the insert reversible or indexable on both sides? Yes, the CNMG190612 is double-sided with a chipbreaker on both active edges, permitting indexability to extend service life and reduce tooling costs. Which toolholders are compatible with this ISO plate? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert follows ISO rhombic standards and uses a cylindrical hole for secure clamping. What cutting geometry is represented by the 80° angle? An 80° approach angle gives a balanced distribution of radial and axial forces, making the plate versatile for external and internal turning while supporting stable cutting in rostfreie Stähle. Can this insert be used for finishing passes? Yes; with appropriate feeds and speeds and depending on the required surface finish, the 1.2 mm corner radius and the AH6225 grade allow semi-finishing and finishing in many rostfreie Stahl applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6225 for stable, sharp cutting at medium cutting depths and in variable conditions, combined with the CNMG 190612 ISO geometry for reliable fitment in ISO holders; order directly via Metav Werkzeuge or consult their technical team for application parameters. CNMG 190612 AH6225 Tungaloy ISO turning insert – rhombic CNMG 80° turning insert CNMG 190612 AH6225 is a rhombic ISO turning insert optimised for turning applications, offering a balanced combination of a sharp, stable cutting edge and wide applicability for stainless steels in medium-duty machining. Universal grade AH6225 for stainless steels PVD-coated carbide for durable cutting edge 80° rhombic CNMG geometry for turning Double-sided chipbreaker, cylindrical hole Higher process stability and extended edge life for stainless steels The combination of PVD-coated carbide and the AH6225 grade delivers a durable, wear-resistant cutting edge engineered for the demands of machining stainless steels. The coating improves thermal resistance and reduces adhesion, which in turn stabilises tool life under changing cutting conditions. For production environments where tool-change intervals and surface integrity affect throughput, this insert offers predictable performance that helps lower the cost per component through fewer interruptions and consistent surface finish. The robust design is particularly suitable for medium finishing passes where a sharp but stable edge is required. Predictable fit and fast indexability reduce downtime Built to ISO dimensions and the CNMG rhombic form, the insert ensures dependable compatibility with standard external holders and boring bars when form, clearance angle, tolerance class, fastening, size and thickness match. The 80° approach angle and 1.2 mm corner radius deliver a compromise between strength and cutting engagement, reducing deflection on cantilevered setups. The double-sided format allows quick indexing to a fresh cutting edge, shortening machine downtime. A consistent holder–insert system, including clamps and screws matched to the insert thickness of 6.35 mm, supports repeatable seating and secure clamping for stable cutting forces. Reliable chip control and application guidance for repeatable results The double-sided chipbreaker designed for this geometry offers controlled chip formation in a range of turning operations, both external and internal, when paired with an appropriately rigid setup. The insert’s cylindrical hole facilitates positive locating in many clamping systems and supports consistent chip flow. For best results, match the chipbreaker and insert grade to the workpiece condition and machining stability; selecting the correct feed and depth of cut will preserve edge life and surface quality. Metav Werkzeuge’s technical consultants can assist with parameter selection and holder compatibility to optimise cycle times and machining reliability. Discuss machining parameters or order the CNMG 190612 AH6225 insert via Metav Werkzeuge for application-specific advice and prompt delivery; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903183 SKU: 6903183-Tungaloy Manufacturer item number: TUN6903183 Model series: ISO-Drehwendeschneidplatten Designation: CNMG190612 AH6225 Tungaloy turning insert Facts Size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Approach angle: 80° Clearance (relief) angle: 0° Hole: with hole Hole style: cylindrical Special features Material: carbide Coating: PVD Grade: AH6225 Insert form: rhombic (CNMG) Chipbreaker: double-sided Application: turning ISO-standardised turning insert FAQ Which materials is this insert optimised for? The CNMG 190612 AH6225 insert is optimised for stainless steels and similar alloys; the AH6225 grade and PVD coating are intended to reduce adhesion and improve edge life when machining rostfreie Stähle. How does the CNMG geometry affect turning performance? The CNMG rhombic form with an 80° approach angle balances access and strength for external and internal turning; the geometry supports stable cutting and predictable insert seating in ISO holders. What is the benefit of the AH6225 grade with PVD coating? The AH6225 grade combined with a PVD-coated carbide substrate enhances wear resistance and thermal stability, yielding a sharp, stable cutting edge and longer usable life in medium finishing operations. Is this insert compatible with common ISO holders? Yes—CNMG190612 is an ISO-standardised insert; compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness to the holder and clamping set. How should chip control be handled for best results? Use the double-sided chipbreaker with feed and depth of cut appropriate to the workpiece and setup rigidity; for marginal setups, reduce depth of cut or increase support to maintain consistent chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH6235 Wendeplatten - Tungaloy
The combination of PVD-coated carbide, AH6235 grade and 80° rhombic geometry ensures reliable chip control and extended tool life for stainless steel turning; order the CNMG 190612 AH6235 turning insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG 190612 AH6235 ISO turning insert — PVD-coated carbide, 1.2 mm radius (Tungaloy) CNMG 190612 AH6235 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a tough PVD‑coated carbide grade optimised for stainless steels and interrupted cuts. CNMG190612 ISO turning insert, PVD-coated carbide AH6235 grade for stainless steel and interrupted cuts Double-sided chipbreaker for consistent chip control Rhombic 80° geometry with 1.2 mm corner radius Stable performance where material and interruption challenge productivity The insert delivers consistent cutting under difficult conditions because of its PVD‑coated carbide substrate and the AH6235 grade, which is formulated for tougher microstructures and improved edge strength. This combination reduces the risk of edge chipping during interrupted cuts and when machining rostfreier Stahl. The coating supports thermal resistance and wear protection, translating into longer tool life and fewer indexings, which improves uptime and lowers process cost per component. Geometry and holder compatibility that simplify setup and repeatability The rhombic 80° geometry with a 1.2 mm corner radius provides a reliable compromise between strength and form accuracy. The ISO designation specifies size and shape; compatibility with a holder depends on form, relief angle, tolerance class, fixation method, size and thickness. The insert’s 6.35 mm thickness and cylindrical hole allow secure clamping and stable seating in standard external holders or boring bars. Clear specification reduces trial‑and‑error in fixture selection and helps engineers achieve repeatable part tolerances. Chip control and application advantages for efficient turning operations The double‑sided chipbreaker is designed to produce predictable chip shapes across varying cutting conditions, improving evacuation and minimising contact with the workpiece. For external and internal turning tasks, this leads to fewer interruptions from tangled chips or build‑up, especially with stainless steels and applications prone to serrated chips. The insert’s toughness and chip control combine to support higher feeds where process stability allows, delivering enhanced productivity without compromise to surface quality. For precision turning needs with a focus on stainless steel performance, contact Metav Werkzeuge for application advice and to request availability of the CNMG 190612 AH6235 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and ordering assistance. Technical data Article number: 6903362 Manufacturer SKU: TUN6903362 Merchant SKU: 6903362-Tungaloy Model series: ISO turning inserts Material: Carbide Core specifications ISO designation: 190612 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Relief (rake) angle: 0° Features & applications Grade/coating: AH6235, PVD‑coated Chipbreaker: Double‑sided Shape: Rhombic Hole: With cylindrical hole Typical application: External and internal turning Suited for: Stainless steel and interrupted cuts FAQ What materials is this insert best suited for? The CNMG 190612 AH6235 insert is optimised for rostfreier Stahl and performs well in interrupted cutting where improved edge toughness is required. Does the insert fit standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fixation method, size and thickness; the CNMG190612 designation corresponds to standard ISO holder interfaces. How does the AH6235 grade influence tool life? The AH6235 PVD‑coated carbide combines toughness and wear resistance to reduce edge breakage and extend index life under challenging stainless steel conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, double-sided indexing and ISO compatibility for reliable turning of heat-resistant alloys and hard materials. Order the CNMG190612 AH8005 insert directly via Metav Werkzeuge or ask the consultants for application advice. CNMG190612 AH8005 Tungaloy turning insert — PVD-coated carbide, 80° rhombic The CNMG190612 AH8005 is a rhombic, ISO-standard indexable insert engineered for external and internal turning where stable machining of hard or heat-resistant materials is required. PVD-coated wear-resistant grade AH8005 ISO CNMG 190612 rhombic 80° geometry Double-sided indexable insert, 6.35 mm thick Suitable for heat-resistant alloys and hard materials Greater process reliability for demanding alloys The PVD-coated carbide grade AH8005 combines thermal stability with controlled flank wear, making it well suited for machining heat-resistant alloys and other tough materials under stable conditions. The coating enhances resistance at elevated temperatures and reduces built-up edge, which translates into longer edge life and more predictable tool change intervals. Complemented by a double-sided chipbreaker, the insert supports consistent chip formation and evacuation during continuous operations, helping to maintain cycle times and reduce scrap rates without sacrificing surface integrity. Secure clamping and economical indexing A robust clamping interface is essential for repeatable results; the cylindrical hole and ISO dimensions ensure secure fixture in the matching holder. The combination of ISO compatibility, form, tolerance class, fastening type, size and 6.35 mm thickness must be observed when selecting a holder to guarantee correct seating and repeatability. The double-sided design allows multiple indexable cutting edges, lowering tool cost per edge and improving overall tool utilisation in volume production. The neutral 0° clearance angle provides versatile engagement for various turning setups and simplifies holder selection. Precision finishing with controlled edge geometry The 1.2 mm corner radius balances toughness and finish capability, offering strength for interrupted cuts while still enabling fine surface results where process stability permits. The 80° rhombic geometry provides good access for both external and internal turning operations and supports a variety of approach angles. For demanding surface-quality requirements, pairing the insert with a stable toolpost and rigid holder minimises vibration and makes the most of the insert’s geometry and chipbreaking features to achieve consistent finishes. Practical selection advice for the workshop For best results, match the insert’s chipbreaker style to the workpiece material and machining strategy: the double-sided chipbreaker is optimised for steady chip control during continuous and semi-continuous cuts. In less rigid or highly interrupted conditions, consider a more robust clamping arrangement or a holder that increases overhang stiffness. The indexable insert is intended for ISO-conforming tool systems; compatibility is determined by the holder’s form, free angle, tolerance class, fastening, size and thickness. If application parameters are uncertain, technical consultation is recommended to align insert grade, geometry and holder choice for the targeted material and machining stability. Contact Metav Werkzeuge for detailed application support and availability of the Tungaloy CNMG190612 AH8005; advise by phone or email is available to match the insert to specific turning tasks. Technical data Article number: 6741647-Tungaloy Manufacturer SKU: TUN6741647 Manufacturer article no.: 6741647 Model series: ISO-Drehwendeschneidplatten Data Geometry designation: CNMG190612 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Insert angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating / grade: AH8005, PVD-coated Chipbreaker: double-sided Plate shape: rhombic Application: turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The CNMG190612 AH8005 Tungaloy turning insert is designed primarily for heat-resistant alloys and other hard materials, exploiting the PVD-coated carbide grade AH8005 for improved wear resistance. Is the insert compatible with standard CNMG holders? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; the CNMG190612 conforms to ISO dimensions but the matching holder must meet the same specifications for secure clamping. How does the double-sided design affect tool economy? The double-sided construction of the CNMG190612 AH8005 insert provides multiple indexable cutting edges, reducing the cost per edge and improving overall tool utilisation in production environments. What corner radius and thickness does the insert offer? This insert features a 1.2 mm corner radius and a plate thickness of 6.35 mm, offering a compromise between edge strength and surface finish capability. Which chipbreaker is fitted to the insert? The insert is supplied with a double-sided chipbreaker, optimised for stable chip control during continuous turning operations and suitable for the specified material range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 AH8015 Wendeplatten - Tungaloy
Take advantage of the proven balance of PVD-coated AH8015 grade and the 80° CNMG geometry to achieve reliable tool life and consistent edge stability in the machining of heat‑resistant alloys; order the insert via Metav Werkzeuge or request tailored advice from our consultants for holder compatibility and process setup. CNMG 190612 AH8015 Tungaloy turning insert — ISO rhombic indexable insert for turning The CNMG 190612 AH8015 is an ISO rhombic indexable insert engineered for external and internal turning, offering a combination of wear resistance and cutting‑edge stability suitable for heat‑resistant alloy machining. ISO rhombic CNMG 80° geometry PVD-coated carbide grade AH8015 1.2 mm corner radius for stability Double-sided chipbreaker, with cylindrical hole Reliable performance with PVD-coated carbide for heat-resistant alloys The combination of a PVD-coated carbide substrate and the AH8015 grade gives a measured compromise between wear resistance and edge security, making this insert a reliable choice for machining temperature‑resistant alloys. In practical terms, the coating reduces flank and crater wear under elevated cutting temperatures, while the substrate maintains fracture resistance. This results in extended service intervals and more predictable tool life, which supports continuous production runs and lowers unexpected stoppages. Stable geometry and secure clamping for repeatable turning results The 80° rhombic geometry and 1.2 mm corner radius deliver mechanical stability at the cutting edge, enabling secure engagement in both external and internal turning operations. The double‑sided chipbreaker provides two indexing positions, improving cost efficiency per insert, while the cylindrical hole ensures positive clamping and consistent seating in compatible holders. The 6.35 mm plate thickness supports robust clamping forces and helps absorb cutting loads, contributing to consistent surface finish and reduced vibration. System compatibility and straightforward selection for production environments This insert is part of the ISO series of indexable turning plates and is compatible with holders where form, clearance angle, tolerance class, fastening, size and thickness match. Selecting the appropriate chipbreaker and grade according to workpiece material and process stability is essential: the AH8015 grade is the preferred option for general machining of heat‑resistant alloys, while different chipformers optimise swarf control and surface quality. Clear specifications reduce setup time and increase process security on production‑grade lathes. Practical application advice for efficient machining Designed for both external and internal turning, the CNMG series insert supports productive machining strategies when paired with a suitably rigid toolholder and stable clamping. The balanced material properties of the grade make the insert suitable for continuous and interrupted cuts where a compromise between edge life and toughness is required. For best results, combine the insert’s geometry with appropriate cutting parameters and cooling strategy to achieve repeatable surface integrity and predictable wear. For application‑specific recommendations on the CNMG 190612 AH8015 turning insert or to confirm holder compatibility, contact Metav Werkzeuge for expert advice and fast technical support — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6741648 Manufacturer SKU: TUN6741648 SKU: 6741648-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Included angle: 80° Designs / Special features ISO designation: CNMG190612 Grade: AH8015, PVD-coated carbide Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical hole (with hole) Clearance angle: 0° Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The AH8015 grade is optimised for the general machining of heat‑resistant alloys; the CNMG 190612 insert from Tungaloy performs well where elevated cutting temperatures occur and a balance of wear resistance and edge stability is required. What are the key dimensions and geometry of the insert? The CNMG 190612 features an 80° rhombic geometry, a corner radius of 1.2 mm, plate thickness 6.35 mm and a plate size of 19 mm, with a cylindrical hole for secure clamping. Is the insert indexable and does it offer multiple cutting edges? Yes, the insert is double‑sided with a chipbreaker on both faces, allowing indexation to a fresh cutting edge and extending the effective life per insert. For which turning applications is this insert recommended? Designed for both external and internal turning, this insert is particularly recommended for turning heat‑resistant alloys and similar materials where a compromise between edge life and toughness is required; choose the chipbreaker and holder to match workpiece and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 KS20 Wendeplatten - Tungaloy
A combination of KS20 wear resistance, 1.2 mm corner radius and ISO CNMG geometry delivers consistent turning performance and long tool life; the rhombic design with a cylindrical hole ensures secure clamping and reliable chip control. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored machining advice. CNMG 190612 KS20 Turning insert — Tungaloy The CNMG190612 KS20 Tungaloy insert is an ISO rhombic, double-sided indexable insert designed for general turning applications, offering robust edge stability and optimised chip control in ISO-based tool systems. CNMG190612 rhombic ISO geometry KS20 grade for wear and edge stability 1.2 mm corner radius for durable cutting edge Double-sided chipbreaker with cylindrical hole Dependable cutting performance for repetitive turning tasks The KS20 grade, developed by Tungaloy, combines wear resistance and toughness to maintain a sharp cutting edge under continuous operation. This indexable carbide solution provides stable tool life, which reduces interruptions for tool changes and supports a steady production rhythm. The rhombic CNMG geometry and 80° included angle enable secure engagement on external and internal turning operations, while the 1.2 mm corner radius balances edge strength with achievable surface finish. Reduced setup time through standardised ISO compatibility Designed to ISO standards, the insert’s form, relief angle (0°), tolerance class, fastening arrangement and plate thickness determine holder compatibility. The standardised dimensions—19 mm size and 6.35 mm thickness—ensure predictable fitment in compatible external holders or boring bars. This compatibility minimises trial-and-error in tool selection and speeds up changeovers; as part of a system concept, the insert works with a matching seat/clamp set and replacement screws for secure fixation. Effective chip control and process stability The double-sided chipbreaker is engineered to provide consistent chip formation across a range of turning conditions. By stabilising chip flow, the insert lowers the risk of built-up edge and improves surface quality. The cylindrical hole supports reliable clamping and repeatable indexing, so the productive cutting geometry is restored quickly when the insert is rotated or replaced. For manufacturers seeking steady cycle times, this translates into fewer rejects and higher throughput. Practical system approach and economical operation This ISO insert is intended for use in an indexable insert system comprising an external holder or boring bar, underlay/clamp set and spare fixing screws. The ability to index both sides of the insert doubles usable cutting edges, enhancing cost-effectiveness over single-edge tools. The carbide composition and Tungaloy material selection help extend runtimes, making the solution suitable where predictable tool life and reduced tooling costs are priorities. For technical guidance on selecting the right Tungaloy turning grade or to order CNMG190612 KS20 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802293 Manufacturer SKU: TUN6802293 Supplier SKU: 6802293-Tungaloy Designation: CNMG190612 KS20 Model series: ISO-Drehwendeschneidplatten Material: carbide Core specifications Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Included angle: 80° Relief angle: 0° Design & features Rhombic plate form (CNMG) Double-sided chipbreaker Cylindrical hole (with hole) ISO-compatible turning insert Tungaloy KS20 grade Intended application: turning System concept: holder or boring bar, underlay/clamp set, replacement screws FAQ What is the corner radius of the CNMG190612 KS20 insert? The CNMG190612 KS20 insert features a 1.2 mm corner radius for robust edge strength and consistent surface finish. Which machining operations suit this insert? This Tungaloy CNMG insert is intended for turning operations, covering both external and internal turning when used in an appropriate holder or boring bar. Is the insert indexable on both sides? Yes, the insert is double-sided with a chipbreaker on each face, allowing rotation to a fresh cutting edge and improving cost efficiency. What material is the insert made from and what grade is used? The insert is manufactured from carbide and supplied in Tungaloy’s KS20 grade, optimised for wear resistance and cutting-edge stability. How does the cylindrical hole affect mounting? The cylindrical hole provides secure, repeatable clamping in standard ISO tool seats, supporting stable cutting and straightforward indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of high‑speed performance, CVD‑coated wear resistance and a stable CNMG geometry for consistent turning results; order directly via Metav Werkzeuge or ask the consultants for holder compatibility and application advice. CNMG 190612 T5105 — ISO rhombic turning insert by Tungaloy for turning The CNMG190612 T5105 is an ISO‑standard rhombic insert designed for high‑speed machining of cast iron under stable cutting conditions CVD‑coated carbide T5105 for wear resistance Optimised for high‑speed cast iron turning CNMG rhombic 80° geometry for stable cutting Double‑sided chipbreaker with cylindrical hole High‑speed cast iron performance for consistent productivity The CVD‑coated T5105 grade provides a balanced combination of wear resistance and thermal stability, specifically developed for productive machining of cast iron. The coating reduces flank wear during elevated cutting speeds, which translates into longer tool life and fewer insert changes. For operations where cycle time and repeatability matter, this insert supports steady cutting conditions and reliable surface quality with limited process interruption. Simple system integration and predictable holder compatibility The insert follows ISO dimensions and its compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic CNMG shape with an 80° included edge angle and a 0° clearance angle is suitable for a wide range of standard external and internal turning holders. When selecting a holder, match the insert seat to the geometry and thickness 6.35 mm to ensure correct seating and clamping; this reduces vibration and improves repeatable performance. Cutting stability and chip control for safer machining Equipped with a double‑sided chipbreaker and a cylindrical hole for secure fastening, the insert offers stable chip formation during medium to high material removal rates. The corner radius 1.2 mm supports robust cutting edges that withstand intermittent cuts and slight interruptions in feed, improving edge strength and reducing the risk of chipping. Controlled chip formation also helps maintain machine uptime and contributes to a safer shopfloor environment. Durable carbide substrate and application focus Manufactured from sintered carbide, the grade delivers a combination of toughness and hardness that is appropriate for machining cast iron in stable setups. The insert is double‑sided, allowing indexation for extended service life before disposal. For best results, pair the grade with compatible holders and set cutting parameters optimised for cast iron to exploit the full potential of the T5105 coating in high‑speed scenarios. Contact Metav Werkzeuge for application‑specific recommendations on Tungaloy CNMG190612 inserts and matching holder solutions Technical Data Article number: 6850169 Manufacturer article number: 6850169 SKU: 6850169‑Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Size: 19 mm Thickness: 6.35 mm Included angle: 80° Corner radius: 1.2 mm Special features Material: carbide Coating: CVD Grade: T5105 Shape: rhombic (CNMG) Chipbreaker: double‑sided Hole: with cylindrical hole Clearance angle: 0° Typical application: turning System setup: ISO insert, holder, clamp and screws; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CNMG190612 T5105 insert is optimised for machining cast iron; the T5105 CVD coating and carbide substrate deliver wear resistance at high cutting speeds for this material group. How does the corner radius affect cutting? A 1.2 mm corner radius increases edge strength and promotes stable cutting with improved surface finish when using appropriate feeds; CNMG geometry benefits from this radius in medium to heavy cuts. Is the insert reversible and how many cutting edges are available? The insert is double‑sided with indexable edges, permitting rotation to a fresh cutting edge and extending service life before replacement. Which holder characteristics are essential for correct seating? Correct holder selection requires matching the ISO form, thickness (6.35 mm), fastening method and tolerance class to ensure secure clamping and vibration‑free operation with this insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190612 T5115 Wendeplatten - Tungaloy
High cutting-edge stability and balanced wear resistance make this CVD‑coated carbide insert ideal for consistent cast-iron turning; its 80° rhombic geometry with a 1.2 mm corner radius and double-sided chipbreaker ensures reliable chip control and repeatable surface finish. Order the insert directly via Metav Werkzeuge or consult the product specialists for precise holder matching. CNMG190612 T5115 CNMG turning insert — CVD‑coated carbide, 80° rhombic — Tungaloy A CNMG190612 T5115 ISO rhombic insert engineered for external and internal turning of cast iron, offering secure mounting via a cylindrical centre hole and a universal grade for stable machining. CVD-coated carbide universal grade T5115 80° rhombic geometry, 1.2 mm corner radius Double-sided chipbreaker for consistent chips Cylindrical centre hole for secure clamping Consistent wear resistance for cast-iron turning The T5115 grade is a CVD‑coated cemented carbide formulated as a universal solution for cast iron, combining wear resistance with cutting-edge stability. The coating enhances resistance to abrasive wear while preserving edge strength, which supports long, predictable tool life under typical turning parameters. The integrated double-sided chipbreaker controls chip formation across a range of feed rates, reducing the risk of built-up edge and improving process stability. This results in a more consistent surface finish and fewer interruptions for tool changes, which benefits batch production and single-part runs alike. Robust geometry and ISO compatibility for secure clamping The insert’s 80° rhombic geometry and 1.2 mm corner radius provide a favourable balance between cutting strength and accessibility for profile work. With a thickness of 6.35 mm and a cylindrical centre hole, the component is designed for rigid mounting in standard ISO toolholders; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Where a reliable assembly is required, the complete system comprises the ISO insert, a matched external holder or boring bar, a support shim or clamping set and replacement screws. Clear specification of these parameters ensures secure fixation and repeatable positioning at every index. Predictable productivity and straightforward process choice Using a grade that is optimised for cast iron, combined with the insert’s geometry and chip control, delivers predictable tool life and reproducible surface quality—key factors for efficient machining cycles. The double‑sided design effectively halves the cost per cutting edge versus single‑sided alternatives, while the balanced properties of the coating and substrate reduce the likelihood of premature chipping. For best results, select a holder and cutting parameters that match the intended depth of cut and stiffness of the setup; stable machine conditions amplify the advantages of the insert and help secure shorter cycle times with consistent component quality. For precise application matching and availability of the Tungaloy CNMG190612 T5115 insert, contact Metav Werkzeuge—Metav Werkzeuge can advise on holder selection and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6852949 SKU: 6852949-Tungaloy Manufacturer SKU: TUN6852949 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Coating: CVD Grade: T5115 Application: Turning Core data Corner radius: 1.2 mm Thickness: 6.35 mm Size (inscribed circle): 19 mm Relief angle: 0° Cutting angle: 80° Centre hole: cylindrical hole Special features Rhombic plate form CNMG Double-sided chipbreaker ISO compatibility for holders Secure clamping with cylindrical centre hole FAQ What materials is this grade intended for? The CNMG190612 T5115 insert from Tungaloy is a universal grade optimised for cast iron, offering a balanced combination of wear resistance and edge stability suited to a wide range of grey and malleable cast irons. Which geometry and mounting features does the insert have? The insert features an 80° rhombic geometry with a 1.2 mm corner radius, a thickness of 6.35 mm and a cylindrical centre hole for secure mounting in ISO toolholders; matching of form, relief angle, size and fastening is required. How does the CVD coating affect performance? The CVD coating on the T5115 grade increases abrasive wear resistance while maintaining cutting-edge stability, which supports predictable tool life and improved surface finishes during turning of cast iron. Is the insert reversible and what is the advantage? The insert is double-sided with chipbreakers on both cutting faces, allowing indexing to a fresh edge and effectively doubling the number of usable cutting edges for cost-efficient machining. Can this insert be used for internal turning as well as external turning? Yes, the design is suitable for both external and internal turning when paired with an appropriate holder or boring bar that provides the required rigidity and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade designed for cast iron, ISO‑standard geometry and a double-sided chipbreaker for flexible, productive turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG190612 T5115 indexable turning insert — Tungaloy, 80° rhombic geometry, 1.2 mm nose radius CNMG190612 T5115 is an ISO‑standard indexable insert for turning applications, principally developed for machining cast iron with a balance of wear resistance and edge stability. CVD-coated cemented carbide grade T5115 Universal grade optimised for cast iron ISO‑standard CNMG190612 geometry Double-sided chipbreaker, cylindrical hole High-capacity grade for consistent cast iron machining The T5115 grade is a CVD-coated cemented carbide developed as a universal solution for machining cast iron, delivering an even balance between wear resistance and edge integrity. In practice, this creates stable chip formation and predictable tool life under a range of cutting conditions, which translates into fewer interruptions on the shop floor and improved process reliability. The coating reduces flank wear at moderate to high cutting speeds, helping to maintain component dimensional accuracy over longer tool life. Geometry and mounting that simplify tool management The CNMG190612 geometry features an 80° approach angle and a rhombic profile with a 1.2 mm nose radius, providing a versatile combination of accessibility and edge strength for both external and internal turning. The plate is 6.35 mm thick and supplied with a cylindrical hole, enabling secure clamping in compatible holders. A 0° clearance angle and double-sided chipbreaker construction mean the insert can be indexed to a fresh cutting edge, reducing inventory needs and improving uptime. Compatibility to a holder is ensured by matching form, free angle, tolerance class, fastening method, size and thickness. Practical gains: productivity, reduced downtime and straightforward selection Using a CVD-coated universal grade like T5115 supports higher productivity in many cast iron applications by extending intervals between tool changes and delivering consistent surface finish. Selecting the appropriate chipbreaker and grade according to workpiece material and machine stability is key: a double-sided chipbreaker suits a variety of chip control requirements and can be used where reversibility and economy are priorities. The combination of cemented carbide core, protective coating and ISO geometry provides a straightforward route to optimised cutting data and lower total machining costs through longer tool life and stable chip control. Contact Metav Werkzeuge for tailored recommendations on holders and cutting parameters or to discuss batch supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to connect with an application specialist Technical data Article number: 6850170 Manufacturer SKU: TUN6850170 SKU: 6850170-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Designation: CNMG190612 Facts Size: 19 mm Thickness: 6.35 mm Nose radius: 1.2 mm Approach angle: 80° Clearance angle: 0° Article number: 6850170 Special features Material: cemented carbide Coating: CVD-coated Grade: T5115 Shape: rhombic Mounting: cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning ISO designation: CNMG190612 FAQ What materials is this insert designed for? The CNMG190612 T5115 insert from Tungaloy is primarily specified for machining cast iron, offering a universal balance of wear resistance and edge stability suitable for many grey and nodular iron applications. Is the insert reversible and how does that affect stock management? Yes — the insert has a double-sided chipbreaker, which allows indexing to a fresh edge; this reduces the number of distinct items required in tool inventory and improves economic efficiency. Which holders are compatible with this ISO insert? Compatibility depends on matching the rhombic form, 80° approach angle, tolerance class, fastening method, size and thickness; the CNMG190612 format with a cylindrical hole fits standard ISO indexable turning holders designed for this geometry. How does the CVD coating benefit machining performance? The CVD-coated cemented carbide of the T5115 grade reduces flank wear and supports stable chip formation at moderate to high cutting speeds, resulting in more consistent surface finish and extended tool life compared with uncoated grades. Can this insert be used for internal turning as well as external turning? Yes — the insert is suitable for both external and internal turning operations, provided the chosen holder and tool overhang match the application and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T5125 Wendeplatten - Tungaloy
Reliable machining performance for interrupted cuts and less stable setups is achieved by the combination of the 80° rhombic geometry, CVD-coated T5125 grade and a 1.2 mm corner radius that secures the cutting edge; the insert is optimised for turning cast iron. Order the CNMG190612 T5125 turning insert via Metav Werkzeuge or consult our specialists for tailored selection support. CNMG190612 T5125 — ISO turning indexable insert for turning, Tungaloy A CNMG190612 T5125 indexable insert engineered for external and internal turning, optimised for cast iron and designed to perform under interrupted cuts and less stable machining conditions CNMG190612 ISO geometry, 80° rhombic shape CVD-coated carbide (T5125) for tough cast iron 1.2 mm corner radius for robust edge strength Double-sided chipbreaker, cylindric hole fastening Reliable chip control for interrupted turning operations The double-sided chipbreaker and CVD surface treatment deliver consistent chip control even during interrupted cuts. This design reduces the risk of built-up edge and promotes stable evacuation of chips, so the cutting process remains predictable in stop‑start conditions. The tougher T5125 grade is formulated to resist chipping and maintain edge integrity when the cut is unstable, which translates into fewer unscheduled tool changes and improved process efficiency. Geometry that combines strength with accessibility The 80° rhombic geometry provides a balance between rigidity and cutting-edge access: the included angle supplies support for the cutting edge while allowing effective approach angles for external and internal profiles. The 1.2 mm corner radius increases edge durability, lowering the likelihood of premature failure on interrupted surfaces. Together, these geometrical aspects enable higher allowance for micro‑vibrations and moderate machine rigidity without sacrificing surface quality. Coating and material engineered for cast iron Constructed from cemented carbide and finished with a CVD coating (T5125), the insert is particularly suited to cast iron applications where toughness is required. The coating enhances wear resistance and helps maintain a stable cutting edge at elevated temperatures. For users moving from general‑purpose grades, this combination offers a clear advantage in productivity when the workpiece material and cutting conditions demand improved fracture resistance rather than only maximum hardness. System compatibility and practical benefits in the tool room Compatibility with holders depends on form, relief angle, tolerance class, fixation, size and thickness; the ISO standardised CNMG format and the supplied dimensions (inscribed circle 19 mm, thickness 6.35 mm) simplify holder selection and stock management. The cylindric hole enables secure fastening in many standard holder systems. Using an ISO‑conforming insert streamlines tooling logistics and reduces setup time, contributing directly to predictable throughput in production environments. For personalised guidance on selecting Tungaloy turning inserts such as the CNMG190612 T5125 and to ensure the grade and chipbreaker match the intended cast iron application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance Technical data Article number: 6850171 SKU: 6850171-Tungaloy Manufacturer SKU: TUN6850171 Manufacturer article number: 6850171 Model series: ISO turning indexable inserts Facts Inscribed circle: 19 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Relief angle: 0° Double-sided insert Special features Material: carbide Coating: T5125 (CVD) Chipbreaker: double-sided Plate shape: rhombic Hole: cylindrical hole, with hole Application: turning; suitable for cast iron; interrupted cuts FAQ Which materials suit this insert best? The CNMG190612 T5125 insert is optimised for cast iron; the T5125 grade and CVD coating favour tougher, interrupted cutting of cast iron materials. What does the 80° rhombic geometry and 1.2 mm radius mean in practice? An 80° rhombic form with a 1.2 mm corner radius offers enhanced edge support and access to external and internal contours, improving edge life and reducing chipping during unstable cuts. How to check holder compatibility for an ISO CNMG insert? Compatibility is governed by form, relief angle, tolerance, fixation, size and thickness; verify the holder matches the CNMG190612 dimensions and fastening style before assembly. Is the chipbreaker suitable for heavy interrupted cuts? The double-sided chipbreaker provides consistent chip control in interrupted or irregular cuts, and the tougher T5125 grade reduces risk of edge fracture under such conditions. Can the insert be indexed to use both sides? Yes, the insert is double-sided and can be rotated to present a fresh cutting edge, extending the service life per index cycle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T5125 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide for improved wear resistance, a design optimised for cast iron with interrupted cuts, and ISO-compliant geometry for reliable clamping. Order the insert directly via Metav Werkzeuge or consult the specialists for application-specific selection. CNMG 190612 T5125 Turning Insert – CVD-coated carbide by Tungaloy The CNMG190612 T5125 is a rhombic ISO turning insert designed for external and internal turning, offering robust performance in interrupted cuts and less stable machining conditions. CVD-coated carbide for enhanced wear resistance Optimised for cast iron and interrupted cuts ISO CNMG190612, rhombic 80° form Double-sided chipbreaker, cylindrical hole Consistent performance on cast iron and mixed conditions The T5125 grade is a CVD-coated carbide developed for tougher machining scenarios, providing a balance between toughness and wear resistance. In practice, this means fewer insert changes and steadier tool life when turning cast iron under interrupted conditions or where machine rigidity is limited. The coating reduces flank wear and the substrate toughness helps resist chipping at interrupted cuts, delivering measurable uptime improvements and stable surface finish without sacrificing productivity. Secure clamping and ISO interchangeability for predictable results Built to the ISO CNMG190612 form, the insert features a rhombic 80° geometry and a 1.2 mm corner radius, with a 6.35 mm thickness and a cylindrical centre hole for positive locating. Compatibility with a holder is determined by the insert form, clearance angle (0°), tolerance class, fastening method, size and thickness; adherence to ISO dimensions simplifies toolholder selection and repeatable set-up. The double-sided design also doubles the effective life per insert by allowing rotation, reducing inventory turnover and gage variation between indexed positions. Practical system setup and chip control for efficient production Integrating this indexable component into a machining system requires the matching external holder or boring bar, a suitable shim or clamp set and the correct replacement screws. Selecting the appropriate chipbreaker and grade for the workpiece and cutting parameters is essential: the double-sided chipbreaker on this insert improves chip control for many cast iron grades, reducing recutting and aiding coolant access. For production runs, the result is a more predictable process, easier scrap control and clearer cost-per-part calculations. Discuss machining strategy and supply options with Metav Werkzeuge for the Tungaloy T5125 grade — technical consultancy and fast delivery are available via Metav Werkzeuge. Technical data Article number: 6852950 Manufacturer SKU: TUN6852950 Seller SKU: 6852950-Tungaloy Model series: ISO turning inserts Facts Insert designation: CNMG190612 Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert form angle: 80° Special features Material: carbide Coating / grade: T5125 (CVD-coated) Plate form: rhombic Chipbreaker: double-sided Hole: with hole, cylindrical hole Typical application: turning (external and internal) System components: matching holder or boring bar, shim/clamp set, replacement screws FAQ What workpieces is this insert best suited to? This insert is optimised for machining cast iron and performs well in interrupted cuts; the T5125 coating and substrate offer a robust combination for such conditions. How does the ISO CNMG190612 form affect holder selection? ISO CNMG190612 specifies the rhombic 80° form and dimensions, enabling straightforward selection of compatible external holders or boring bars that accept CNMG inserts. Can the insert be rotated to use multiple cutting edges? Yes, the insert is double-sided and indexable, allowing rotation to the next edge to extend tool life and reduce tooling costs. What does the T5125 designation mean in practice? T5125 denotes a CVD-coated carbide grade tuned for toughness and wear resistance, providing reliable performance on cast iron with intermittent engagement. Is there guidance on matching chipbreakers to material and machining type? Chipbreaker choice should be aligned with the workpiece and stability of the set-up; the supplied double-sided chipbreaker is a versatile option for many cast iron turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T515 Wendeplatten - Tungaloy
Take advantage of the combination of economical machining, robust wear resistance and straightforward holder compatibility to keep turning cycles productive and predictable; order the insert via Metav Werkzeuge or request advice from our technical consultants. CNMG 190612 T515 – rhombic ISO turning insert for Drehen, Tungaloy The CNMG190612 T515 is a CVD‑coated carbide ISO turning insert engineered for economical machining of cast iron in external and internal turning operations. CVD-coated carbide grade T515 for cast iron Rhombic CNMG 190612 geometry, 80° cutting edge Double-sided insert with 1.2 mm nose radius ISO compatibility: 6.35 mm thickness, cylindrical hole Consistent economy for cast-iron turning The combination of a CVD‑coated surface and a wear‑resistant carbide substrate provides durable cutting performance suited to high material removal rates on cast iron. The T515 grade is designed for economical production: it balances edge life and productivity so that fewer tool changes are required under stable cutting conditions. Where vibration or interrupted cuts occur, the choice of the appropriate chipbreaker and the correct grade helps maintain process stability and predictable tool lives. By favouring a grade optimised for the workpiece material and the intended feed/speed range, machining runs become more cost‑efficient without sacrificing surface quality. Geometry engineered for accuracy and fit The rhombic CNMG form with an 80° cutting edge and an inscribed circle of 19 mm gives a stable cutting geometry for a wide range of turning tasks. Key dimensions — 6.35 mm plate thickness, 0° clearance angle and the cylindrical hole — affect clamping and stiffness; correct matching to the toolholder ensures repeatable clamping and secure fixation. The 1.2 mm nose radius delivers a compromise between edge strength and surface finish, helping to produce consistent diameters and acceptable roughness on external and internal features. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so selecting a matching ISO holder is essential for optimal results. Practical process advantages and application guidance As a double‑sided insert, this CNMG version offers economical indexability: the reversible design doubles usable cutting edges per insert and reduces tooling costs per component. The contained system concept includes the ISO turning plate, a suitable external holder or boring bar, and the necessary clamping parts, which supports fast changeover and consistent clamping forces when maintained correctly. For best outcomes, pair the insert with a chipbreaker suited to the specific cast‑iron grade and with a machining strategy adapted to part stability; this approach improves chip control and extends effective cutting life while maintaining productivity. For cost‑effective and process‑reliable cast‑iron turning with the Tungaloy CNMG190612 T515, contact Metav Werkzeuge to arrange supply or technical consultation via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Manufacturer item number: 6747808 SKU: 6747808-Tungaloy Model series: ISO turning inserts Application: Turning Dimensions / core data Inscribed circle: 19 mm Thickness: 6.35 mm Nose radius: 1.2 mm Clearance angle: 0° Wedge angle: 80° Hole: with cylindrical hole Material / special features Material: carbide Coating: CVD Grade: T515 Chipbreaker: double-sided Geometry: rhombic CNMG Compatibility: ISO turning holders (fit by form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert optimised for? The CNMG190612 T515 insert is optimised for economical machining of cast iron thanks to its T515 CVD‑coated carbide grade and the matching chipbreaker design. Can the insert be used for both external and internal turning? Yes, the rhombic CNMG geometry and the 1.2 mm nose radius allow use in both external and internal turning applications when paired with a suitable holder. How does the double‑sided design affect tooling costs? A double‑sided CNMG insert provides two usable edges per index, effectively reducing the cost per cutting edge and lowering overall tooling expenditure for the CNMG190612 T515. What should be checked to ensure holder compatibility? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these dimensions ensures correct clamping and repeatable performance with the CNMG190612 T515. Is the insert suitable for interrupted cuts? Yes; the T515 grade and robust carbide substrate of the CNMG190612 T515 make it suitable for operations that include moderate interruption, provided the machining parameters and holder rigidity are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a robust 1.2 mm corner radius for reliable, high-speed steel turning and improved tool life. Order the CNMG190612 T9205 directly via Metav Werkzeuge or ask our consultants if needed. CNMG190612 T9205 ISO turning insert for turning — Tungaloy A CNMG190612 T9205 ISO turning insert designed for productive external and internal turning of steel, offering a balance of process stability and wear resistance. CVD-coated carbide for wear resistance Robust 1.2 mm corner radius Double-sided chipbreaker for reliable chips ISO-standard rhombic insert, 80° approach Optimised for productive steel turning The insert is built around a CVD-coated carbide grade that delivers wear resistance under elevated cutting speeds while maintaining surface quality. The T9205 coating combination supports stable cutting edge behaviour during sustained runs, which translates into fewer interruptions and a higher parts-per-tool ratio. With a corner radius of 1.2 mm, the insert improves cutting edge strength and reduces the risk of chipping, enabling consistent material removal when turning medium to heavy feeds. For workshops seeking measurable productivity gains, this geometry and coating pairing provides an efficient compromise between tool life and machining rate. Secure fit and straightforward compatibility for production lines Compatibility with toolholders is governed by form, relief angle, tolerance class, clamping style, size and thickness; this means the insert integrates into established ISO systems without guesswork. The rhombic geometry with an 80° approach and a 6.35 mm thickness offers secure seating in standard external holders and boring bars. The double-sided chipbreaker supports repeatable chip formation and helps maintain machine uptime by easing chip evacuation. Clear, standardised specifications simplify tool inventory and make selection for specific turning tasks faster and less error-prone. Consistent edge life at higher cutting speeds Under stable clamping and correct parameter selection, the combination of the carbide substrate and CVD coating reduces flank wear and extends usable edge life. The insert’s double-sided design provides two effective cutting edges, delivering cost-efficiency in production environments. The cylindrical mounting hole ensures repeatable seating and reliable torque transmission during heavy cuts, while the zero-degree relief supports positive cutting geometries for many steels. This configuration is particularly advantageous where steady process windows and reproducible finishes are required. For high-productivity steel turning, contact Metav Werkzeuge to request CNMG190612 T9205 inserts or to discuss optimal grades and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6785701 Manufacturer SKU: TUN6785701 Marketplace SKU: 6785701-Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.2 mm Approach angle: 80° Clearance angle: 0° Thickness: 6.35 mm Inscribed circle / size: 19 mm Special features CVD-coated carbide grade (T9205) Rhombic insert shape (CNMG) Double-sided chipbreaker Cylindrical mounting hole ISO designation: 190612 Application: turning (external and internal) FAQ What materials is this insert suitable for? The CNMG190612 T9205 insert is formulated for productive turning of steel; the CVD-coated carbide provides wear resistance for a wide range of steel grades under stable cutting conditions. How does the 1.2 mm corner radius affect performance? A corner radius of 1.2 mm strengthens the cutting edge and improves edge life, reducing the likelihood of chipping during interrupted cuts when using the CNMG190612 T9205 insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry and mount dimensions (ISO 190612), so it fits holders and boring bars designed for CNMG rhombic inserts when the clamping style and tolerance class match. Can this insert be used for internal turning? The CNMG190612 T9205 is suitable for both external and internal turning applications, provided the holder geometry and stability meet the machining demands. How many cutting edges are available per insert? This is a double-sided insert offering two usable cutting edges, which supports cost-effective tool utilisation in serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com