CNMG 190616 T5105 Wendeplatten - Tungaloy
Combining CVD-coated T5105 wear resistance with the CNMG190616 geometry ensures durable, high-speed performance for stable turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CNMG190616 T5105 ISO indexable turning insert for turning – Tungaloy The CNMG190616 T5105 is an ISO-indexed, rhombic turning insert engineered for high-speed external and internal turning, offering a wear-resistant grade and secure clamping for stable machining. CVD-coated T5105 grade for wear resistance Rhombic CNMG geometry, 80° cutting angle 1.6 mm corner radius for reliable edge strength Suitable for high-speed turning of cast iron Longer tool life through wear-resistant coating The combination of a CVD-coated cemented carbide substrate and the T5105 grade yields a measurable increase in edge life under steady cutting conditions. This wear-resistant configuration reduces the frequency of tool changes and helps sustain machining cycles, translating into lower non-productive time and improved process stability. The coating chemistry is designed for abrasion resistance, which is particularly beneficial when machining abrasive materials such as cast iron at elevated cutting speeds. Geometry that secures surface quality and dimensional control The rhombic CNMG shape with an 80° included angle and a 1.6 mm corner radius provides a stable cutting edge that supports consistent surface finish and repeatable dimensions. The double-sided insert layout allows economical use of each indexable edge while the cylindrical hole supports positive clamping and precise seat alignment in standard ISO holders. These geometric features contribute to predictable chip flow and reduced vibration when combined with an appropriate holder and setup. Easy integration into ISO tool systems for flexible workflows Designed as an ISO-indexed insert, the component fits common external holders and boring bars when matched by form, clearance, tolerance and size. The 6.35 mm thickness and 19 mm size conform to standard insert families, simplifying inventory management and enabling quick replacements without the need for special adapters. The insert’s specification supports both roughing and finishing operations when paired with a suitable chipbreaker and cutting parameters adapted to stability and material. Economic advantage through process reliability By favouring a robust grade and standardised geometry, the insert delivers a balanced cost-performance ratio for series turning. Long edge life and straightforward system compatibility reduce set-up time and tooling expenditure across production runs. Typical applications include stable external and internal turning where consistent output and repeatable tool performance are priorities; the result is enhanced throughput and a more predictable machining rhythm. For machining tasks that demand high-speed, wear-resistant indexable inserts, contact Metav Werkzeuge to discuss Tungaloy CNMG190616 T5105 availability and application-specific recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6850175 Manufacturer SKU: TUN6850175 Model series: ISO turning indexable inserts Material: Cemented carbide Core data Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Special features CVD-coated grade T5105 Rhombic CNMG shape Cylindrical central hole Double-sided with multiple cutting edges Application: turning System components: insert, holder or boring bar, clamping set, replacement screws FAQ What materials is this insert intended for? The CNMG190616 T5105 insert is optimised for machining cast iron, with the CVD-coated carbide grade providing abrasion resistance suited to high-speed turning of such materials. How does the T5105 grade affect performance? The T5105 grade offers enhanced wear resistance and stable performance under high cutting speeds, extending edge life and supporting uninterrupted production cycles. Is the geometry suitable for both roughing and finishing? Yes; the rhombic CNMG form, 1.6 mm corner radius and 80° angle enable use across roughing and finishing operations when combined with the appropriate chipbreaker and cutting data. How is the insert clamped in the holder? The insert features a cylindrical hole and standard ISO form for secure mechanical clamping in compatible external holders or boring bars, ensuring repeatable seating and stability. Which SKU identifies this product? This item is listed under article number 6850175 and manufacturer SKU TUN6850175; it is an ISO-indexed insert delivered by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T5115 Wendeplatten - Tungaloy
Precision turning and reliable chip control are delivered by the CNMG190616 T5115 CVD‑coated carbide insert with an 80° rhombic geometry and a 1.6 mm corner radius; its double‑sided design and cylindrical mounting hole contribute to cost‑effective tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored support. CNMG 190616 T5115 — Turning insert CNMG190616 T5115 (CVD‑coated carbide, 80°) by Tungaloy CNMG190616 T5115 is an ISO‑standard indexable turning insert intended for external and internal turning of cast iron, combining balanced wear resistance with edge stability for general turning applications. CVD‑coated carbide for durable cutting 80° rhombic form for stable turning 1.6 mm corner radius for toughness Double‑sided insert with cylindrical hole Increased process stability and consistent edge performance The combination of a CVD‑coated surface and carbide substrate in grade T5115 gives a balanced resistance to abrasive wear while maintaining edge stability during interrupted cuts. This results in a predictable tool life under typical turning conditions. The ISO rhombic geometry with an 80° included angle supports a broad range of turn‑in operations, providing a reliable reference geometry for toolpath planning and machine setup. Improved chip control and material adaptability for cast iron The insert’s double‑sided chipbreaker design promotes controlled chip formation when machining cast iron, reducing secondary machining time and improving surface condition. A well designed chipbreaker lowers the risk of chip entanglement and helps evacuate swarf efficiently, which is particularly beneficial in automated or lights‑out production. The universal nature of the grade makes it suitable where a compromise between wear resistance and toughness is required. Easy integration with ISO holders and robust mounting The plate is ISO‑standardised and features a cylindrical mounting hole, which simplifies mechanical clamping and replacement in compatible toolholders. Compatibility with a holder is determined by the insert form, relief angle, tolerance class, fastening type, size and thickness. Using an ISO‑compliant holder ensures repeatable positioning and clamping force, which in turn supports consistent cutting performance and repeatable part quality. Economical handling and selection guidance for production use Being double‑sided, the insert offers two usable edges per index, lowering the cost per cutting edge and reducing tool changes across a production run. The 1.6 mm corner radius provides a balance between edge strength and dimensional control, suitable for a wide variety of turning tasks. For stable setups and medium to heavy material engagement, select an appropriate chipbreaker and consider the machine’s rigidity to fully exploit the grade’s advantages. For reliable, CVD‑coated carbide solutions from Tungaloy, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6850176 Manufacturer SKU: TUN6850176 Product SKU: 6850176-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: CNMG190616 Facts Corner radius: 1.6 mm Relief angle: 0° Included angle: 80° Plate thickness: 6.35 mm Plate size: 19 mm Special features CVD‑coated carbide Universal grade T5115 for cast iron Double‑sided chipbreaker Cylindrical mounting hole Rhombic plate form (CNMG) Suitable for external and internal turning ISO‑standard indexable insert; holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The CNMG190616 T5115 turning insert is a universal grade primarily developed for machining cast iron, offering a balanced combination of wear resistance and edge stability suitable for general turning. Is this an indexable and reversible insert? Yes, the insert is double‑sided and indexable; CNMG190616 T5115 provides two usable cutting edges per plate, helping to reduce tooling costs. What are the key geometric specifications of the insert? The insert has an 80° rhombic geometry, a 1.6 mm corner radius and a plate thickness of 6.35 mm, corresponding to the CNMG190616 ISO designation. How is the insert mounted in the toolholder? Mounting is via a cylindrical hole and ISO‑standard seating; compatibility with a specific holder is defined by form, relief angle, tolerance class, fastening method, size and thickness. Can this insert be used for internal turning operations? Yes, the CNMG190616 T5115 indexable insert is suitable for both external and internal turning applications when paired with a compatible internal turning holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190616 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T5115 and an 80° CNMG geometry for consistent machining and long tool life, together with economical indexing from a double-sided chipbreaker. Order the CNMG190616 T5115 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 190616 T5115 ISO turning insert – CVD-coated carbide, 80° rhombic (Tungaloy) CNMG190616 T5115 is an ISO‑standard indexable insert for turning applications, designed as a universal grade for cast iron and engineered for reliable edge stability in a wide range of machining tasks. ISO CNMG 190616 geometry, 80° rhombic insert CVD-coated carbide grade T5115 for cast iron Double-sided chipbreaker for repeatable indexing Cylindrical hole mount, 6.35 mm plate thickness Consistent wear life and surface quality through CVD-coated carbide The CVD-coated carbide grade T5115 delivers a balanced mix of wear resistance and edge stability, which translates into predictable component quality and longer effective tool life. As a universal grade for cast iron, this insert reduces the need for frequent index changes while maintaining a consistent surface finish. The coating enhances thermal stability at elevated cutting temperatures and supports productive machining cycles with stable cutting edges. Geometry that improves rigidity and reduces vibration The 80° CNMG geometry combined with a 1.6 mm corner radius and a 6.35 mm plate thickness provides improved rigidity for medium to heavy turning operations. The double-sided chipbreaker offers two indexable cutting edges, enabling economical use of the insert and fast edge changes. Secure fixing is ensured by a cylindrical hole and standard mounting arrangements, while the rhombic form contributes to accessibility in shoulder and profile turning. Compatibility with toolholders depends on holder form, clearance angle, tolerance class, fastening, size and thickness. Practical selection and application advice for turning tasks Designed for both external and internal turning, this indexable insert is best paired with holders that match the ISO CNMG form and the specified clearance geometry. The double-sided design supports fast re-indexing for shorter downtime, and selecting the appropriate chipbreaker and grade according to workpiece stiffness and feed conditions ensures repeatable chip control and process reliability. For mixed workloads, the balanced properties mean fewer grade changes and improved process economy. Contact Metav Werkzeuge for technical advice or to request this Tungaloy CNMG190616 T5115 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Product: CNMG190616 T5115 Tungaloy indexable insert Article number: 6852952 Manufacturer SKU: TUN6852952 SKU: 6852952-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Special features Material: carbide (Hartmetall) Coating: CVD Grade: T5115, universal for cast iron Chipbreaker: double-sided Hole: cylindrical Shape: rhombic, CNMG geometry Application: turning (external and internal) Compatibility: determined by holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials can be machined with this insert? The CNMG190616 T5115 indexable insert from Tungaloy is optimised for cast iron and offers a good balance of wear resistance and edge stability; it can also be used on various steels depending on cutting data and chipbreaker selection. How does the chipbreaker design affect performance? The double-sided chipbreaker on this T5115 grade provides controlled chip formation and reliable chip evacuation, improving surface quality and allowing economical re-indexing of the insert. Is the insert compatible with standard CNMG holders? Compatibility requires matching holder form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG190616 form follows ISO geometry and fits holders designed for CNMG inserts with the corresponding seat and clamp. What do the numbers in CNMG190616 mean? The designation CNMG190616 indicates the CNMG form with a 19 mm inscribed circle, a plate thickness corresponding to 6.35 mm (06 code) and a corner radius of 1.6 mm (16 code). Can this insert handle heavy-duty turning? The 80° geometry, 6.35 mm thickness and 1.6 mm corner radius give good rigidity for medium to heavy cuts; final suitability depends on machine stability, holder choice and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T5125, a 1.6 mm corner radius and ISO compatibility for reliable turning performance; order directly via Metav Werkzeuge or consult the technical team for application support. CNMG190616 T5125 Tungaloy indexable insert — ISO rhombic turning insert for cast iron The CNMG190616 T5125 is an ISO rhombic indexable turning insert engineered for external and internal turning of cast iron, optimised for interrupted cuts and less stable machining conditions. CVD-coated carbide grade T5125 Rhombic 80° shape with 1.6 mm radius Double-sided chipbreaker for consistent chips Cylindrical hole and 6.35 mm thickness Increased process reliability and predictable tool life The CVD-coated carbide composition and T5125 grade deliver a balance of toughness and wear resistance that reduces the risk of premature edge failure in interrupted cuts. This combination supports a stable cutting edge under varying conditions and contributes to longer tool life, meaning fewer indexings and less machine downtime. The ISO designation ensures compatibility within standard turning tool systems, simplifying inventory management and repeatability in production runs. Optimised for cast iron turning and roughing operations Designed specifically with cast iron operations in mind, the insert’s geometry and double-sided chipbreaker promote secure chip control and help avoid troublesome built-up edge formation. The 1.6 mm corner radius provides strength at the cutting edge for roughing passes, while the rhombic 80° shape gives access for a wide range of turning profiles. These features translate into effective material removal rates and improved surface finishes when the cutting data is matched to the workpiece and machine rigidity. Simple selection and secure mounting for workshop integration Compatibility with a holder is defined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the CNMG190616 therefore fits ISO holders that match these parameters. The cylindrical hole facilitates secure clamping and repeatable seating, while the 6.35 mm thickness adds stiffness in demanding cuts. Where uncertainty exists, reference the ISO series and holder specification to confirm the correct assembly and to avoid mismatches that could affect performance. For availability and tailored advice on using Tungaloy’s T5125 inserts in specific cast iron turning tasks, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 — our consultants provide application guidance and delivery options Technical data Article number: 6852953 Manufacturer SKU: TUN6852953 Brand: Tungaloy Designation: CNMG190616 T5125 Tungaloy indexable insert Model series: ISO indexable turning inserts Material: carbide Coating: CVD Facts Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Shape angle: 80° Hole: with cylindrical hole Special features Double-sided chipbreaker Rhombic plate form ISO-standardised geometry Suited for interrupted cuts in cast iron System includes matching external holders and clamp sets FAQ What materials is this insert intended for? The insert is optimised for cast iron machining and the CNMG190616 T5125 grade is formulated for interrupted cuts and less stable conditions. How is compatibility with tool holders determined? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; matching those ISO parameters ensures correct fitment for the insert. Does the insert support secure clamping? The insert features a cylindrical hole which enables reliable clamping and repeatable seating in compatible holders. What advantages does the CVD coating offer for this grade? The CVD coating on this carbide grade enhances wear resistance while retaining sufficient toughness for interrupted cutting, improving edge life under variable loads. What is the corner radius and how does it affect cutting? The corner radius is 1.6 mm; this radius reinforces the cutting edge for roughing passes and improves resistance to chipping during heavy engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T5125 Wendeplatten - Tungaloy
Reliable chip control and a tough CVD‑coated carbide grade deliver stable performance in interrupted turning of cast iron; the ISO CNMG 190616 geometry ensures broad compatibility with standard toolholders. Order this insert directly via Metav Werkzeuge or consult their specialists for application support. CNMG 190616 T5125 — indexable turning insert, CVD‑coated carbide, 80° — Tungaloy The CNMG 190616 T5125 is an ISO‑standard indexable insert for external and internal turning, optimised for cast iron applications and engineered to perform under interrupted cuts and less stable workholding conditions. ISO‑standard CNMG 190616 geometry CVD‑coated carbide grade T5125 80° rhombic shape with 1.6 mm radius Double‑sided insert with cylindrical hole Consistent edge life for interrupted turning The combination of a CVD‑coated surface and a wear‑resistant carbide substrate provides reliable performance where cutting conditions fluctuate. The T5125 grade is formulated as a tougher compound, which helps absorb mechanical shock during interrupted cuts in cast iron and similar materials. This resilience reduces edge chipping and extends usable life, translating into fewer insert changes and steadier production cycles. The constructive benefit is clear: improved uptime and predictable tool change intervals for medium‑ to heavy‑duty turning. Secure clamping and proven geometry for versatility The insert’s 80° rhombic profile and 0° relief angle deliver a robust cutting edge that balances strength and accessibility for external and internal operations. With a 1.6 mm corner radius and 6.35 mm thickness, the geometry supports stable engagement and repeatable positioning in standard ISO holders; the central cylindrical hole ensures positive clamping. Being double‑sided, the insert offers multiple effective cutting edges, improving cost efficiency per edge and simplifying inventory management for series production. Practical selection and process advice for optimal results Selecting the correct chipbreaker and grade is decisive: the supplied double‑sided chip control suits interrupted machining, but matching the chipformer to workpiece material and machine rigidity enhances surface finish and thermal control. The insert integrates into a system comprising a matching external holder, backing plate and securing screw; compatibility depends on form, relief, tolerance class, clamping and thickness. For mixed‑material shops, a graded approach — tougher grades for unstable conditions, harder grades for continuous high‑speed finishing — yields the best overall economy. For high‑reliability turning with Tungaloy’s CVD‑coated T5125 grade, contact Metav Werkzeuge for tailored recommendations and prompt supply Technical data Article number: 6850177 Manufacturer SKU: TUN6850177 SKU: 6850177-Tungaloy Model series: ISO‑Drehwendeschneidplatten Dimensions / Core data Insert designation: CNMG 190616 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Shape angle: 80° Material / Features Material: Hartmetall Coating: CVD‑coated Grade: T5125 Relief angle: 0° Hole: cylindrical hole Chipbreaker: double‑sided FAQ What materials is this insert suited for? The T5125 grade and its tougher carbide substrate are particularly suited to cast iron and related interrupted turning operations, providing improved resistance to chipping. How does the CNMG 190616 geometry affect holder compatibility? Compatibility is determined by form, relief, tolerance class, clamping method, size and thickness; the CNMG 190616 conforms to ISO dimensions for straightforward integration with standard holders. Can the insert be indexed to use multiple edges? Yes, the double‑sided construction allows indexing to use several cutting edges, improving cost efficiency and reducing tooling change frequency. What benefit does the CVD coating provide? The CVD coating increases wear resistance and improves thermal stability at the cutting edge, contributing to longer edge life under the intermittent loads typical of interrupted cuts. Is this insert suitable for internal as well as external turning? The rhombic 80° form and 0° relief angle make it suitable for both external and internal turning operations when paired with an appropriate holder and stable setup. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190616 T515 Wendeplatten - Tungaloy
Benefit from economical, CVD-coated carbide and stable chip formation for productive cast-iron turning; the ISO format ensures straightforward integration into standard toolholders. Order the CNMG190616 T515 Tungaloy indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 190616 T515 ISO indexable turning insert for turning — Tungaloy The CNMG190616 T515 is an ISO-format indexable turning insert engineered for economical and reliable machining of cast iron in both external and internal turning applications. CNMG190616 T515 ISO turning insert CVD-coated carbide grade T515 Double-sided chipbreaker with cylindrical hole ISO compatibility for standard holders Productive chip control for cast-iron turning The CVD-coated T515 carbide grade combines wear resistance with consistent cutting performance, making it suitable for a wide range of cast-iron applications. The double-sided chipbreaker promotes predictable chip formation, which reduces downtime caused by chip management and improves process stability. Designed for both continuous and interrupted cuts, this insert supports efficient material removal while maintaining surface quality, so machining cycles remain economical and repeatable. Easy integration into ISO tool systems saves setup time Manufactured to ISO specifications, the insert fits standard indexable turning holders when the holder matches the insert form, clearance, tolerance class, fastening and thickness. The rhombic plate form with an included angle of 80°, a 0° clearance specification and a plate thickness of 6.35 mm means predictable geometry and repeatable seating in compatible holders. These consistent dimensions lower setup complexity and make tool changeovers faster, helping to keep production throughput steady. Robust geometry and reversible cutting edges for lower costs The insert’s 1.6 mm corner radius provides a balance between edge strength and surface finish, suitable for general turning tasks on cast iron. Being double-sided, each insert offers two usable cutting edges, extending life per part and reducing tooling cost per component. Combined with the CVD-coated carbide substrate, the design focuses on longevity and reliable edge retention under standard cutting speeds, which supports long production runs with fewer interruptions. For productive cast-iron turning choose the Tungaloy CNMG190616 T515 insert — contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6747809 Manufacturer SKU: TUN6747809 Model series: ISO-Drehwendeschneidplatten Dimensions & geometry Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Features & applications Rhombic plate form Double-sided chipbreaker Cylindrical hole CVD-coated carbide, grade T515 Suitable for turning — external and internal turning Designed for machining cast iron ISO-conforming indexable insert FAQ What materials is this insert intended for? The Tungaloy CNMG190616 T515 insert is designed primarily for machining cast iron; the CVD-coated carbide grade T515 gives wear resistance suitable for that material class. Can the insert be used for internal as well as external turning? Yes — the ISO-format geometry and rhombic form make the insert suitable for both external and internal turning applications when used with the appropriate holder. How does the double-sided chipbreaker affect costs? A double-sided chipbreaker provides two usable edges per insert, effectively extending tool life and lowering the tooling cost per cutting edge compared with single-sided designs. What determines compatibility with a toolholder? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for correct seating. What are the key geometry specifications to consider for setup? Important specifications include the included angle of 80°, plate thickness 6.35 mm, corner radius 1.6 mm and a 0° clearance angle; these affect seating, cutting forces and achievable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a rhombic 80° geometry to boost productivity and tool life in stable steel-turning operations; compatibility with ISO holders ensures straightforward system integration. Order the insert or consult Metav Werkzeuge for application support. CNMG190616 T9205 — Indexable turning insert (Turning), Tungaloy, CVD-coated carbide, 80° geometry The CNMG190616 T9205 indexable insert for turning, engineered for productive machining of steel under stable conditions and designed to fit ISO-standard external holders. CVD-coated carbide grade T9205 Optimised for productive steel turning Rhombic CNMG 80° geometry Double-sided insert with cylindrical hole Durable grade for higher cutting speeds and longer tool life The CVD-coated carbide grade T9205 provides pronounced wear resistance and thermal stability, enabling elevated cutting speeds where the setup is sufficiently rigid. As a wear-resistant option for steel machining, the coating reduces flank and crater wear, which translates into more consistent part tolerances and longer intervals between index changes. The combination of substrate and deposition technology focuses on stable chip control and predictable tool life, supporting continuous production demands. Geometry and chip control that reduce cycle time The rhombic 80° geometry with a 1.6 mm corner radius lowers cutting forces while maintaining a robust cutting edge, improving surface finish and dimensional stability on external and internal turning operations. The double-sided chipbreaker design offers two usable cutting edges per side, effectively doubling service life per index and reducing tooling costs. A cylindrical hole ensures secure clamping in ISO-compatible pockets, minimising the risk of micro-movements that can degrade surface quality. System compatibility and practical application benefits Designed as part of an ISO turning indexable insert system, compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert integrates with matching external holders or boring bars, plus appropriate underlays, clamp sets and replacement screws. Selecting the correct chipbreaker and grade for the workpiece material and stability of the setup ensures repeatable results and maximum productivity without overcomplicating tool choices. Contact Metav Werkzeuge for tailored advice on using Tungaloy CVD-coated T9205 inserts in your turning applications — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6785702 Manufacturer SKU: TUN6785702 Item SKU: 6785702-Tungaloy Model series: ISO turning indexable inserts Item name: CNMG190616 T9205 Tungaloy indexable insert Facts Corner radius: 1.6 mm Thickness: 6.35 mm Size: 19 mm Clearance angle: 0° Insert geometry/approach angle: 80° Special features Material: carbide Coating: CVD Shape: rhombic (CNMG) Chipbreaker: double-sided Hole: with cylindrical hole Applicable operation: turning Compatible with ISO external holders, underlays and clamp sets FAQ What materials is this insert designed for? The CNMG190616 T9205 insert is formulated for machining steel, particularly where productive turning at higher cutting speeds is required and the setup offers good stability. Can the insert be used on both external and internal turning operations? Yes, the rhombic CNMG geometry and chipbreaker design make the insert suitable for both external and internal turning when used with the appropriate holder. How does the T9205 grade help in production environments? The T9205 CVD coating and carbide substrate provide enhanced wear resistance and thermal stability, which contributes to longer, more predictable tool life in continuous production. Is the insert compatible with standard ISO holders? The insert conforms to ISO turning insert conventions; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness and is achieved with matching ISO external holders and clamp sets. What is the benefit of the cylindrical hole? The cylindrical hole improves centring and secure clamping in the pocket, reducing micro-movements and supporting consistent surface quality and dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9215 Wendeplatten - Tungaloy
Take a reliable, ISO‑compliant indexable solution that combines CVD‑coated carbide in grade T9215 with a robust 80° rhombic geometry and a 1.6 mm corner radius to increase productivity in medium steel turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific selection. CNMG190616 T9215 CNMG Turning insert by Tungaloy — CVD‑coated carbide, 80° rhombic, 1.6 mm radius A CNMG190616 T9215 indexable turning insert engineered for ISO‑standard external and internal turning, offering stable clamping and consistent performance in medium steel machining CNMG190616 T9215 indexable insert, CVD‑coated 80° rhombic geometry with 1.6 mm corner radius Double‑sided chipbreaker, cylindrical hole design Optimised for medium steel machining, high wear resistance Increased productivity through wear‑resistant grade and geometry The combination of a CVD‑coated carbide substrate and the T9215 grade delivers a measurable advantage for continuous and slightly interrupted turning of medium steels. The coating provides improved resistance to abrasive wear, while the carbide core maintains edge stability under load, which reduces tool change frequency and supports higher cutting speeds. This leads to a more predictable production rhythm and lower overall cycle times compared with uncoated or lower‑grade inserts. Secure fit and predictable cutting behaviour in ISO tool systems Designed as an ISO‑standard rhombic insert, the 80° approach angle and the 6.35 mm plate thickness ensure secure seating in compatible holders. The cylindrical hole and central mounting accommodate standard clamping screws and locate the insert reliably, reducing the risk of misalignment and vibration. With a 1.6 mm corner radius, the insert balances form strength and surface finish, giving consistent tool life and dimensional control in turned components. Reliable chip control and application focus for medium steel The double‑sided chipbreaker is tailored for chip shaping in medium steel, promoting stable evacuation and reducing the chance of entangling chips during long runs. Together with the T9215 carbide chemistry, this geometry supports both productivity and component quality: it keeps surface roughness within tight tolerances while reducing forces that can cause edge chipping. The result is improved process security for batch production and single‑piece manufacturing alike. Practical selection guidance for machining setups When integrating this insert into a cell, pair it with a matching external holder or boring bar that accepts CNMG‑style plates and that provides sufficient rigidity for the intended cut. Select the chipbreaker and grade according to workpiece stability and cutting conditions: the supplied combination is intended first for medium steel, but matching the insert to feed, depth, and spindle power will deliver the best results. For complex or mixed operations, consider a short test series to determine the ideal speeds and feeds for consistent life and finish. For application advice or to secure supply of Tungaloy CNMG190616 T9215 indexable inserts, contact Metav Werkzeuge for prompt technical guidance and delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772203 Facts Model series: ISO‑Drehwendeschneidplatten ISO designation: CNMG190616 Grade: T9215 Material: carbide Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Approach angle: 80° Clearance angle: 0° Mounting: with hole (cylindrical) Special features CVD‑coated carbide Double‑sided chipbreaker Rhombic plate form Cylindrical centre hole Suitable for external and internal turning Optimised for medium steel machining Compatible with ISO‑standard holders FAQ What materials is this insert intended for? The CNMG190616 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and fracture toughness for productive turning. Can the insert be used for interrupted cuts? Yes, the CVD‑coated carbide grade T9215 and its geometry are suitable for continuous to slightly interrupted cuts in turning operations. What is the corner radius and why does it matter? The insert has a 1.6 mm corner radius, which improves edge strength and helps achieve a stable surface finish while distributing cutting forces. How is the insert mounted in standard toolholders? The rhombic CNMG form with a cylindrical centre hole fits ISO‑compliant holders and is secured with standard mounting screws for accurate locating and clamping. Is the insert reversible or single‑edged? This CNMG design is double‑sided, allowing rotation to a fresh cutting edge to extend usable life before replacement. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance (grade T9215) and a 1.6 mm corner radius for productive, reliable turning in medium steel; order directly via Metav Werkzeuge or consult the technical team for selection advice. CNMG190616 T9215 ISO turning insert for Turning by Tungaloy — CVD-coated carbide, 1.6 mm corner radius A CNMG190616 T9215 ISO turning insert designed for external and internal turning, offering high wear resistance and fracture toughness for continuous to lightly interrupted cuts CVD-coated carbide grade T9215 1.6 mm corner radius for stable cutting Rhombic 80° geometry with cylindrical hole Double-sided insert, ISO-compliant Increased productivity for medium steel with proven grade performance The combination of a CVD-coated surface and carbide substrate in grade T9215 delivers high wear resistance while maintaining fracture toughness, which supports sustained productivity on medium steels. The coating reduces abrasive wear and improves thermal stability during longer cycles; as a result, chip control remains consistent and tool change frequency is reduced. This brings a measurable benefit to batch production and continuous turning tasks, where process stability and repeatable component quality are priorities. Reliable mounting and system compatibility for safe machining Designed as an ISO-standard indexable insert, the geometry and fixation features determine holder compatibility: form, clearance angle, tolerance class, fastening method, size and thickness must match the toolholder. The insert uses a rhombic shape with an 80° included angle and a cylindrical hole, allowing secure clamping in suitable external holders or boring bars. The nominal plate size is 19 mm with a plate thickness of 6.35 mm and a clearance angle of 0°, which together provide predictable seating and rigidity in a correctly matched system. Extended usable life through indexable design and chip control A double-sided chipbreaker and two usable cutting edges extend operational life by enabling indexation when one edge is worn. The 1.6 mm corner radius reduces cutting-edge stress compared with larger radii while improving edge strength versus very small radii, striking a balance between surface finish and toughness. This indexable approach reduces tooling costs per component and simplifies inventory management compared with single-point tools, supporting economical machining strategies in production environments. Practical guidance for application and selection For external or internal turning in medium steels, select the chipbreaker and holder geometry to match workpiece rigidity and expected cutting conditions. The grade is optimised for continuous to light interrupted cuts; for heavier interruptions, a different breaker or a more fracture-resistant grade may be preferable. Where surface finish and dimensional repeatability are critical, the rhombic 80° insert delivers favourable clearance and chip flow characteristics. For detailed assessment of holder compatibility or to choose the optimal chipbreaker pairing, technical consultation is recommended. Contact Metav Werkzeuge for tailored advice on the Tungaloy CNMG190616 T9215 insert and for assistance in selecting the correct holder and chipbreaker for the intended turning operation Technical data Article number: 6773918 Manufacturer SKU: TUN6773918 Stock SKU: 6773918-Tungaloy Product designation: CNMG190616 Grade/coating: T9215, CVD-coated Material: Carbide Application: Turning Model series: ISO turning inserts Facts Corner radius: 1.6 mm Plate size: 19 mm Plate thickness: 6.35 mm Insert angle: 80° Clearance angle: 0° Special features Rhombic insert shape Cylindrical hole for secure clamping Double-sided chipbreaker ISO-compatible geometry Suitable for medium steel machining System components: insert, matching external holder or boring bar, backing/clamping set and spare screws FAQ What materials is the insert suitable for? The CNMG190616 T9215 insert by Tungaloy is primarily intended for medium steel machining; the T9215 carbide grade combines wear resistance and fracture toughness for productive turning in continuous to slightly interrupted cuts. Is this insert indexable and how many edges are usable? Yes, the insert is double-sided with indexable cutting edges; both sides offer usable edges, which extends the service life compared with single-edged tools. How is holder compatibility ensured for this ISO insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening, size and thickness to the toolholder; ensure the holder accepts a rhombic CNMG190616 geometry with a cylindrical hole. Can this insert be used for interrupted cuts? The T9215 grade is designed for continuous to light interrupted cuts; for heavier interruptions, a more fracture-resistant grade or different chipbreaker is recommended. What are the main advantages of the T9215 grade? T9215 offers high wear resistance alongside good fracture toughness, which supports longer tool life and consistent surface quality during medium steel turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 grade, a 1.6 mm nose radius and the robust 80° rhombic geometry for efficient, high-productivity medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 190616 T9215 — Turning indexable insert, CVD-coated cemented carbide, 1.6 mm radius | Tungaloy CNMG 190616 T9215 is an ISO rhombic turning insert engineered for medium-steel machining, combining wear resistance and fracture toughness for continuous to lightly interrupted cutting. CVD-coated cemented carbide grade T9215 ISO rhombic insert, 80° cutting geometry 1.6 mm nose radius for robust edge strength Double-sided chipbreaker for consistent chips Productivity-focused turning for medium steels The combination of a CVD-coated surface and a wear-resistant cemented carbide substrate in grade T9215 delivers a balance of abrasion resistance and fracture toughness that suits long production runs. This composition is engineered for continuous to slightly interrupted cuts, which translates into fewer tool changes and greater machine uptime. The result is a measurable lift in throughput and a reduction in unplanned stoppages, making this insert a cost-effective choice for shops seeking steady, repeatable performance on medium steels. Consistent surface finish and predictable chip behaviour A double-sided chipbreaker combined with a 1.6 mm nose radius improves chip control and helps secure a uniform surface finish on turned components. The chipformer geometry guides chips away from the cutting zone, reducing re-cutting and stabilising the machining process; this contributes directly to longer edge life and fewer interruptions. For operations where quality and uptime matter, the engineered chip flow reduces secondary operations and supports reliable batch-to-batch consistency. ISO compatibility and practical mounting for workshop workflows Designed as part of the ISO turning insert series, the rhombic CNMG190616 form matches standard holders when form, clearance, tolerance class, fastening, size and thickness are aligned. The insert features a 0° clearance angle, a cylindrical hole for secure clamping and a plate thickness of 6.35 mm, supporting stable seating in a suitable clamping system. As an indexable insert, each cutting edge can be rotated or indexed to present a fresh edge, making the component economical in multi-edge use while simplifying stock control and replacement procedures. For fast availability and application guidance on the Tungaloy CNMG 190616 T9215 turning insert, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — our consultants provide technical advice tailored to workshop needs Technical data Article number: 6772207 Manufacturer SKU: TUN6772207 Label: CNMG190616 T9215 Tungaloy-Wendeplatte SKU: 6772207-Tungaloy Facts Grade: T9215 Coating: CVD-coated Material: cemented carbide Nose radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 19 mm Clearance angle: 0° Cutting angle: 80° Special features Rhombic plate form CNMG190616 Double-sided chipbreaker Cylindrical hole, with hole ISO turning insert series compatibility Suitable for medium steel turning FAQ What materials is this insert intended for? The Tungaloy CNMG 190616 T9215 insert is optimised for medium-steel machining; the T9215 grade combines wear resistance and toughness suitable for this material class. Is the insert reversible and how does that affect cost-efficiency? Yes — the CNMG form is double-sided with a chipbreaker on both usable faces, allowing indexing of multiple edges and improving cost-efficiency by extending the usable life per insert. Which holder and clamping arrangements are required? The insert fits ISO CNMG-compatible holders; compatibility depends on matching the rhombic form, 0° clearance, plate thickness 6.35 mm and the cylindrical hole for secure clamping in the chosen toolholder. What are the key dimensions and identifiers for ordering? Key dimensions: 1.6 mm nose radius, plate size 19 mm, thickness 6.35 mm, 80° cutting geometry. Identifiers: Manufacturer article number 6772207, SKU TUN6772207, label CNMG190616 T9215 Tungaloy-Wendeplatte. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade engineered for toughness and an ISO CNMG geometry that ensures secure fitment and predictable performance in medium to heavy steel turning — a practical choice for stable, efficient machining. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. CNMG190616 T9225 — Tungaloy turning indexable insert, 80° rhombic, 1.6 mm radius CNMG190616 T9225 is an ISO‑standard rhombic insert for turning, designed for medium to heavy steel machining where toughness, wear resistance and stable chip control are required ISO‑standard CNMG geometry CVD‑coated carbide grade T9225 Double‑sided chipbreaker for stable chips 80° rhombic insert with 1.6 mm radius High cutting reliability for medium to heavy steel turning The T9225 grade is a CVD‑coated carbide designed as a robust universal solution for medium to heavy steel machining and light interruptions. Its composition prioritises toughness over extreme hardness, which reduces the risk of chipping under variable engagement and interrupted cuts. As a result, production runs benefit from more consistent tool life and fewer unexpected tool changes, improving overall machine uptime and process stability. Fast integration into ISO tool systems and predictable setup The CNMG190616 geometry follows ISO standards and is compatible with common external holders and boring bars when form, clearance, tolerance class, fastening method, size and thickness match. The 80° rhombic shape and 6.35 mm thickness provide a solid clamping interface; the insert is supplied with a cylindrical hole, permitting secure fastening. A 0° clearance angle and a double‑sided design give two usable cutting edges per index, simplifying inventory management and reducing cost per usable edge. Improved productivity and surface consistency with controlled chip formation A double‑sided chipbreaker on this insert supports reliable chip control across a range of feeds and depths of cut, which contributes directly to surface quality and process security. The 1.6 mm corner radius balances edge strength and finish: it increases resistance to edge wear in heavy cuts while still enabling acceptable surface integrity. Combined with the CVD coating, this results in extended service life under demanding conditions and predictable tool performance over long series production. Practical benefits for workshop and production planning Using an ISO indexable insert with established geometry reduces setup variations between machines and operators. The rhombic form factor and standard dimensions mean holders are widely available, and the reversible nature of the insert yields quick edge changes and lower per‑edge cost. For operations facing mixed or interrupted cuts, the robust grade and chip control minimise downtime caused by edge failure and stabilise component quality. For application recommendations or to secure the CNMG190616 T9225 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our specialists will advise on optimal holder selection and machining parameters. Technical Data Article number: 6780869 Manufacturer SKU: TUN6780869 Our SKU: 6780869-Tungaloy Material: Carbide Grade/coating: T9225 (CVD‑coated) Series: ISO turning indexable inserts Facts ISO designation: CNMG190616 Size: 19 mm Thickness: 6.35 mm Insert angle: 80° Clearance angle: 0° Corner radius: 1.6 mm Special features Insert shape: rhombic Centre hole: with hole Hole style: cylindrical hole Chipbreaker: double‑sided Typical application: turning FAQ Is this insert suitable for interrupted cuts in steel? Yes. The Tungaloy CNMG190616 T9225 insert is formulated for medium to heavy steel machining and offers increased toughness for lightly interrupted cuts, improving edge reliability. What holding criteria ensure compatibility with standard toolholders? Compatibility depends on matching the CNMG form, the thickness (6.35 mm), the size (19 mm), the clearance angle and the fastening style; the cylindrical hole supports secure clamping. How many usable edges does the insert provide? The insert is double‑sided and reversible, offering two usable cutting edges per index, which helps reduce tooling costs and inventory. What role does the 1.6 mm corner radius play in machining? A 1.6 mm corner radius increases edge strength for heavy cuts and intermittent conditions while maintaining acceptable surface finish, balancing life and quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade and a stable 80° rhombic geometry for reliable medium to heavy steel turning; the combination of T9225 toughness and a 1.6 mm corner radius supports interrupted cuts and variable engagement. Order the insert directly via Metav Werkzeuge or consult the team for process-specific recommendations. CNMG 190616 T9225 – CVD‑coated carbide ISO turning insert by Tungaloy The CNMG190616 T9225 is an ISO‑standard, rhombic turning insert designed for external and internal turning in steel applications, offering a robust universal grade for mixed and interrupted cuts. ISO rhombic insert, 80° geometry CVD-coated carbide, grade T9225 1.6 mm corner radius for stable cuts Double-sided chipbreaker, cylindrical hole Reliable cutting performance for variable steel machining The CNMG190616 indexable insert combines a CVD‑coated surface with a wear‑resistant carbide substrate to deliver consistent tool life under changing engagement conditions. The T9225 grade is formulated as a robust universal grade for medium to heavy steel turning, offering increased fracture resistance where chip formation and occasional interruptions occur. This leads to more predictable component tolerances and reduced tool change frequency, supporting steady production cycles. System compatibility and secure clamping for easy integration Engineered to ISO dimensions, the rhombic insert with an 80° included angle and a cylindrical hole fits a wide range of external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the plate thickness of 6.35 mm and the standard ISO designation ensure interchangeability in most tool systems. The double‑sided design extends service life by permitting indexation, while the cylindrical hole provides secure fastening and stable contact during heavy cuts. Process stability and productivity benefits A 1.6 mm corner radius balances edge strength and surface finish, enabling reliable metal removal rates without excessive cutting forces. The double‑sided chipbreaker helps control swarf and promotes predictable chip evacuation on a variety of feeds, improving cycle times and reducing secondary handling. For workshops prioritising throughput, the grade’s combination of toughness and wear resistance supports longer uninterrupted runs and consistent workpiece quality. Practical selection and application guidance When selecting an insert for turning, pair the rhombic geometry and T9225 grade with a holder that matches the insert form and accommodates the 0° relief angle. For heavier interrupted cuts, prefer slightly reduced cutting speeds and increased feed to leverage the grade’s toughness; for finishing passes, moderate feeds and appropriate coolant can enhance surface quality. If assistance is required to match the insert to a specific holder or material mix, technical consultation is advised to choose the optimal chipbreaker and cutting data. For process optimisation and order placement of the Tungaloy CNMG190616 T9225 insert, contact Metav Werkzeuge for tailored machining parameters and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780685 Manufacturer SKU: TUN6780685 SKU: 6780685-Tungaloy Name: CNMG190616 T9225 Tungaloy turning insert Series: ISO-Drehwendeschneidplatten Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Rhombic plate form Cylindrical hole, with hole ISO designation CNMG190616 Application: turning Robust universal grade for medium to heavy steel FAQ What materials is this insert suitable for? The CNMG190616 T9225 insert is formulated for steel machining and performs well in medium to heavy turning operations, providing toughness for slightly interrupted cuts. Can the insert be indexed to use both sides? Yes, the plate is double‑sided and designed for indexation so both cutting edges can be used, extending overall tool life. Which holder and clamping should be used with this ISO insert? Use an ISO‑compatible rhombic external or internal turning holder that accepts CNMG‑type inserts, matching form, thickness (6.35 mm) and the cylindrical hole fastening. How does the 1.6 mm corner radius affect surface finish? A 1.6 mm radius increases edge strength and supports stable cutting in roughing; for finer surface finishes, reduce feed or select a smaller corner radius if available. Is this insert suitable for interrupted cuts? Yes, the T9225 grade and the tougher carbide substrate are optimised for variable engagement and light interruptions commonly found in steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 and the rhombic CNMG geometry with 80° lead and 1.6 mm corner radius for robust, repeatable turning results; order directly via Metav Werkzeuge or contact the consultants for application advice. CNMG 190616 T9225 ISO turning insert for turning — Tungaloy A CNMG190616 T9225 indexable insert engineered for medium to heavy Stahl turning, offering a balanced combination of toughness and wear resistance. CVD-coated carbide grade T9225 Suitable for medium to heavy Stahl turning Rhombic CNMG with 80° lead and 1.6 mm radius Double-sided chipbreaker with cylindrical hole Durable grade for unstable and interrupted cuts The combination of a CVD-coated surface and a carbide substrate provides a resilient cutting edge that copes well with variable engagement conditions. The T9225 grade is specified for applications where slightly interrupted cuts or fluctuating forces demand increased toughness rather than maximum hardness. This results in a more consistent tool life on components made from common engineering materials and improves process stability in serial production. Geometry that supports precision and flexibility The CNMG190616 form follows the ISO rhombic geometry with an 80° cutting angle and a 1.6 mm corner radius, which together allow reliable chip control and dimensional accuracy during external and internal turning. The rhombic profile reduces cutting forces at stepover, enabling better surface finishes with conservative toolpaths. Because the insert is double-sided and indexable, two usable cutting edges are available per side, reducing changeover frequency and supporting uninterrupted machining cycles. Productivity gains through reliable chip control A double-sided design paired with a matched chipbreaker helps evacuate chips efficiently and lowers the risk of built-up edge formation. For turning operations where consistent surface quality is essential, this indexable insert keeps cycle times predictable and minimises secondary operations. The robust grade and chip management combine to offer tangible productivity benefits in batch and continuous manufacturing environments. Compatibility and handling for workshop integration The insert matches ISO-holder interfaces and secures with a cylindrical-hole fastening for straightforward mounting and repeatable clamping accuracy. Its indexable insert design simplifies inventory management and replacement: compatible tooling components include the appropriate ISO external holder, clamp set and replacement screws. For selection, match holder form, relief angle, tolerance class, fastening type, size and thickness to ensure correct fit and performance. For tailored cutting data or to check holder compatibility for this Tungaloy CNMG190616 T9225 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations and delivery options Technical Data Article number: 6780795 Manufacturer SKU: TUN6780795 Metav SKU: 6780795-Tungaloy Model series: ISO turning inserts Designation: CNMG190616 T9225 Grade: T9225 Material: Hartmetall Application: Turning Facts Insert size: 19 mm Thickness: 6.35 mm Cutting angle: 80° Relief angle: 0° Corner radius: 1.6 mm Hole style: cylindrical hole Special features CVD-coated carbide grade T9225 Rhombic CNMG geometry, double-sided Double-sided chipbreaker Compatible with ISO holders and clamping sets Robust universal grade for medium to heavy Stahl turning FAQ What applications suit this insert best? This CNMG190616 T9225 insert is optimised for external and internal turning where medium to heavy Stahl removal or slightly interrupted cuts occur. How many cutting edges are available per insert? The CNMG design provides multiple usable edges; with a double-sided configuration the insert can be indexed to restore a fresh cutting edge, extending service intervals. Is the coating beneficial for heat and wear resistance? Yes. The CVD-coated surface on the carbide substrate enhances wear resistance and thermal stability, which is especially helpful during longer cycles and elevated cutting temperatures. Which holder features are required for correct mounting? A matching ISO-turning holder with the correct form, relief angle, and tolerance class is required; the insert fixes via a cylindrical hole and corresponding clamping hardware. Can this insert be used for finishing operations? With the given 1.6 mm corner radius and rhombic geometry, the insert can achieve good surface quality; finishing capability depends on setup, feeds and speeds chosen for the component. What distinguishes the T9225 grade from harder alternatives? The T9225 grade emphasises toughness and is designed to withstand variable cutting forces and mild interruptions, trading some maximum hardness for improved durability under challenging conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9235 Wendeplatten - Tungaloy
Benefit from a combination of economical performance, robust chip control and reliable edge stability for turning operations; the CVD-coated carbide T9235 grade extends tool life in unstable conditions and interrupted cuts — order the CNMG 190616 T9235 insert directly from Metav Werkzeuge or request application advice from the technical team. CNMG 190616 T9235 – ISO turning indexable insert, CVD-coated carbide (Tungaloy) CNMG 190616 T9235 is an ISO‑standard indexable turning insert designed for external and internal turning of steel, featuring a rhombic 80° geometry and a robust CVD coating for demanding, interrupted cuts. CVD-coated carbide grade T9235 Suited to steel and interrupted cuts ISO CNMG 190616 rhombic 80° geometry Double-sided with cylindrical hole Stable chip control for interrupted and unstable cuts The CVD-coated carbide composition delivers a balance between toughness and wear resistance that suits applications where cutting conditions are variable. The specified T9235 grade is formulated for machining steel at lower cutting speeds and in circumstances with stronger interruptions; the coating reduces flank wear while the substrate maintains edge integrity. This results in more consistent component quality and fewer unscheduled tool changes, which supports higher productivity in batch and mixed‑lot production. Clear ISO compatibility and secure clamping for consistent results As an ISO‑normed insert, the geometry and designation follow recognised standards, but compatibility with a specific toolholder depends on several mechanical parameters: shape, clearance angle, tolerance class, fastening method, overall size and thickness. The rhombic 80° outline and the cylindrical hole permit reliable seating in many standard CNMG holders; correct matching of holder and insert ensures repeatable clamping and accurate cutting edges, reducing set‑up time and the risk of chatter. Robust grade and design that extend in‑service life The double‑sided construction provides two usable edges per insert, which optimises cost per cutting edge. The moderate corner radius supports a compromise between strength and surface finish, while the T9235 composition is tuned to resist chipping under unstable loads. For operations that require occasional entry into interrupted zones or variable feed, the combination of a tough substrate and a protective CVD layer yields longer effective life and steadier surface quality on parts made from carbon and alloyed steels. Practical benefits for workshop planning Using a standard ISO CNMG insert simplifies inventory and planning: the consistent geometry reduces the variety of holders needed, and the double‑sided layout halves the frequency of insert replacements. Where surface finish and tool life are priorities under non‑ideal conditions, this insert grade supports predictable machining cycles and helps maintain process stability across different batches. Contact Metav Werkzeuge for cutting recommendations specific to the Tungaloy CNMG 190616 T9235 insert or to check stock and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6785923 SKU: 6785923-Tungaloy Manufacturer SKU: TUN6785923 Series: ISO‑Drehwendeschneidplatten Material: carbide Facts Insert corner radius: 1.6 mm Included angle: 80° Thickness: 6.35 mm Size: 19 mm Clearance angle: 0° Hole style: cylindrical hole Special features Grade: T9235 (CVD‑coated carbide) Shape: rhombic (CNMG) Double‑sided, reversible insert Designed for external and internal turning Suitable for interrupted cuts and unstable conditions Chipbreaker: double‑sided FAQ Which materials is this insert suitable for machining? The CNMG 190616 T9235 insert is specified for machining steel; the T9235 grade and CVD coating are optimised for carbon and alloyed steels under lower cutting speeds and interrupted conditions. Can the insert be used for interrupted cuts and unstable conditions? Yes, the T9235 composition was selected for improved edge toughness in interrupted cuts and less stable machining scenarios, helping to prevent edge chipping. What does the rhombic 80° geometry mean for application? An 80° rhombic shape provides a strong cutting edge with good versatility for both external and internal turning; it offers favourable access to shoulders and profiles while maintaining mechanical strength. How is compatibility with a holder determined? Compatibility depends on the holder form, clearance angle, tolerance class, fastening type, insert size and thickness; correct matching ensures secure clamping and repeatable results. Is the insert reversible and how many edges are available? The insert is double‑sided and reversible, providing two usable cutting edges per side and thus multiple indexable edges before disposal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9235 grade and the robust 80° rhombic geometry to ensure stable turning under interrupted cuts; order the CNMG 190616 T9235 insert via Metav Werkzeuge or consult our specialists for application advice. CNMG 190616 T9235 turning insert by Tungaloy — 80° rhombic, CVD-coated carbide The CNMG190616 T9235 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for steel machining in unstable conditions and interrupted cuts. CVD-coated carbide grade T9235 for steel 80° rhombic insert geometry Double-sided chipbreaker for versatile use Cylindrical hole and 6.35 mm thickness Consistent performance where stability is limited The CVD-coated T9235 grade provides a tough, wear-resistant cutting surface suited to lower cutting speeds and heavy interruptions. This combination reduces flank wear and prolongs edge life in applications where rigidity is compromised. By choosing a grade tailored to steel, shops gain predictable tool life and fewer unscheduled indexings, which translates directly into improved machine uptime and reduced tooling costs. System compatibility and efficient tool set-up Compatibility depends on form, clearance angle, tolerance class, clamping and insert dimensions; the rhombic CNMG shape and 6.35 mm thickness align with common ISO holders and boring bars. The standard ISO designation CNMG190616 enables straightforward selection of matching external holders, shims and replacement screws. Specifying the correct holder and clamping method ensures secure seating of the insert, consistent cutting geometry and repeatable results across batch runs. Geometry and chip control for reliable turning The 80° approach angle and 1.6 mm corner radius balance strength and finish: the larger corner radius enhances edge robustness, while the rhombic form supports both external and internal turning. The double-sided chipbreaker improves chip formation and evacuation on both indexable sides, reducing heat build-up and minimising risk of built-up edge in interrupted operations. These features help maintain surface integrity on the workpiece and reduce the need for secondary finishing. Practical benefits for production workflows Integrating this ISO insert into standard tool systems simplifies inventory management and reduces set-up time. The CVD-coated carbide substrate is particularly effective for steels under variable conditions, giving shops the benefit of extended tool life and fewer tool changes. With correct holder matching and recommended machining parameters, the insert contributes to stable cycle times and repeatable part quality, supporting leaner workflows and predictable scheduling. Contact Metav Werkzeuge to request Tungaloy CNMG 190616 T9235 inserts for robust steel turning or to obtain tailored cutting recommendations from our application specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6786037 Manufacturer SKU: TUN6786037 SKU: 6786037-Tungaloy Facts Material: carbide Model series: ISO turning inserts ISO designation: CNMG190616 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Cutting angle: 80° Special features Grade/coating: T9235, CVD-coated Insert form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning FAQ What applications suit this insert best? The CNMG 190616 T9235 insert is intended for external and internal turning of steel, especially where cuts are interrupted or machine stability is limited. How is compatibility with holders determined? Compatibility is defined by insert form, clearance angle, tolerance class, clamping method and the insert’s size and thickness; matching holders and shims ensure the CNMG190616 seats correctly. Which geometrical data are relevant when selecting tooling? Key dimensions include the 80° approach angle, 19 mm size, 6.35 mm thickness and 1.6 mm corner radius; these determine strength, reach and surface finish potential for the insert. Is the insert suitable for interrupted cutting? Yes, the T9235 grade and the double-sided chipbreaker are designed to handle stronger interrupted cuts and unstable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190616 T9235 Wendeplatten - Tungaloy
High-performance CVD-coated carbide in a robust rhombic form—ideal for steel turning with interrupted cuts. The 1.6 mm nose radius and 80° geometry provide edge security and versatile use in external and internal turning. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. CNMG 190616 T9235 ISO rhombic turning insert, CVD-coated carbide, 1.6 mm radius — Tungaloy The CNMG190616 T9235 Tungaloy insert is an ISO rhombic turning insert engineered for turning steel, delivering reliable performance in unstable setups and interrupted cutting conditions. CVD-coated carbide grade T9235 for steel machining Robust 1.6 mm nose radius for interrupted cuts 80° rhombic geometry with cylindrical hole Double-sided chipbreaker for stable chip control Durable coating and material for reliable steel turning The combination of CVD-coated surface and carbide substrate (grade T9235) is designed to resist abrasive wear while maintaining toughness where it matters. This composition supports machining of steel at lower cutting speeds and in challenging conditions, such as interrupted cuts or reduced machine rigidity. The coating reduces flank wear and helps preserve the cutting edge, which translates into longer effective tool life and fewer indexings. As a standardised ISO insert, the component offers predictable performance across compatible toolholders and setups. Secure clamping and geometry for repeatable results Compatibility with a holder is governed by the insert's form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic shape and cylindrical hole ensure a stable mechanical interface. The 80° approach angle provides a balance between radial support and access for profiling, while the 6.35 mm plate thickness contributes to stiffness in the cutting zone. The double-sided chipbreaker enables effective chip control on both usable edges, reducing the risk of built-up edge and improving surface finish in many turning operations. Process stability and flexible application in workshop practice With a 1.6 mm nose radius, the insert combines edge strength with acceptable versatility for finishing and light roughing passes, helping to maintain consistent dimensional accuracy. The insert is suitable for both external and internal turning tasks and is particularly recommended where intermittent cuts or unstable setups demand a tougher grade. The ISO conformity of the insert simplifies tool planning: matching the insert to the correct outer holder, adaptation plate and clamping set supports efficient changeovers and predictable machine cycles, contributing to higher productivity and reduced downtime. For robust steel turning with the T9235 grade, contact Metav Werkzeuge for availability and practical application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785825 Manufacturer SKU: TUN6785825 Supplier SKU: 6785825-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Core measurements Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Approach angle: 80° ISO designation: 190616 Features & applications Grade: T9235 Coating: CVD-coated carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Typical use: external and internal turning Recommended for: steel, interrupted cuts, unstable conditions FAQ What materials is this insert suitable for? The CNMG190616 T9235 insert is formulated as a tough, CVD-coated carbide grade intended primarily for machining steel, especially where lower cutting speeds or intermittent cuts occur. Can the insert be used for both external and internal turning? Yes. The rhombic geometry and ISO conformity make the insert suitable for both external and internal turning applications when paired with an appropriate holder. How does the double-sided chipbreaker benefit the process? The double-sided chipbreaker on the T9235 insert improves chip control on both usable edges, supporting a more consistent surface finish and reducing the likelihood of chip-related interruptions. What determines compatibility with a toolholder? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; these parameters must match the selected holder and clamping set to ensure safe and repeatable mounting. What does the T9235 grade mean in practice? T9235 denotes a CVD-coated carbide grade aimed at delivering toughness and improved wear resistance for steel machining in unstable setups and interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190624 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) for increased wear resistance and the THS chipbreaker for controlled chip formation to keep production stable and productive; order the insert through Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMG 190624 T9215 Tungaloy indexable insert for turning The CNMG190624-THS T9215 is an ISO-format indexable insert designed for external and internal turning, offering a balance of wear resistance and fracture toughness for medium steel machining. CVD-coated carbide grade T9215 THS chipbreaker for controlled chips 2.4 mm corner radius for robust cutting ISO CNMG190624 with cylindrical hole Longer tool life through advanced coating technology The combination of a CVD-coated carbide substrate and the T9215 grade provides high resistance to abrasive wear while maintaining edge toughness. Chemical vapour deposition (CVD) applies wear-resistant layers uniformly, which reduces flank and crater wear during continuous and slightly interrupted cuts; this translates into longer tool life and fewer indexings per workpiece. Such a material choice is particularly effective when machining medium-strength steels, where a balance between hardness and fracture resistance is required. The result is a measurable improvement in productivity and consistency across batch runs. Stable cutting behaviour and improved surface quality A 2.4 mm corner radius paired with the 80° geometry of the rhombic insert increases edge strength and supports steady material removal, while the THS chipbreaker controls chip formation for predictable evacuation. Controlled chips reduce the risk of built-up edge and surface defects, supporting a more consistent surface finish. The insert’s hole style — a cylindrical hole — ensures reliable clamping in compatible ISO holders, which is important for concentricity and repeatable results in both external and internal turning operations. Quick integration into ISO tool systems for efficient changeover Built to ISO dimensions, the insert fits established CNMG toolholders when form, relief angle, tolerance class, fixing method, size and thickness match. The insert’s nominal 19 mm size and 6.35 mm thickness make it compatible with a wide range of standard holders and boring bars, enabling straightforward replacement without process redesign. The 0° relief angle and rhombic shape allow flexible use for diverse turning operations, reducing fixture complexity and supporting rapid tool-change routines that keep machine uptime high. Application guidance and process reliability For stable, repeatable results choose a chipbreaker and grade that match the workpiece material and the machining conditions; the T9215 grade is recommended as a first choice for medium steel, linking high wear resistance with good fracture behaviour under continuous or mildly interrupted cuts. Metav Werkzeuge provides technical data and parameter suggestions for cutting speed, feed and depth of cut to align the insert’s strengths with the machining setup. The combination of tested geometry and modern coating supports reliable batch production and helps maintain consistent tolerances over extended runs. Contact Metav Werkzeuge for material-specific cutting data or to confirm holder compatibility for the Tungaloy CNMG190624-THS insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application parameters and availability Technical data Article number: 6773842 SKU: 6773842-Tungaloy Manufacturer SKU: TUN6773842 Brand: Tungaloy Facts Insert size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Included angle: 80° Hole: cylindrical Special features Grade/coating: T9215 (CVD-coated carbide) Chipbreaker: THS ISO designation: CNMG190624-THS Shape: rhombic Application: Turning (external and internal) Compatibility: ISO holders via form, relief, tolerance, fixing, size and thickness Material: Carbide FAQ What material classes is this insert optimised for? The CNMG190624-THS T9215 insert from Tungaloy is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to slightly interrupted turns. Is the insert suitable for both external and internal turning? Yes, the ISO CNMG190624 geometry and rhombic shape make the insert suitable for external and internal turning operations when mounted in a compatible holder. How does the THS chipbreaker affect machining? The THS chipbreaker on this Tungaloy insert promotes controlled chip formation, improving evacuation and reducing built-up edge, which supports consistent surface quality and stable cutting conditions. Can the insert handle interrupted cuts? The T9215 grade offers enhanced fracture resistance, making the insert suitable for continuous to mildly interrupted cuts; heavily interrupted operations may require a more robust grade or modified cutting strategy. What clamping features must the holder provide? Holders must match ISO CNMG form, provide correct relief and tolerance class, and use a fixing method compatible with a cylindrical hole to ensure stable clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 190624 T9225 THS Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade T9225 and a THS chipbreaker provides robust performance for medium‑to‑heavy turning tasks; take advantage of consistent chip control and long tool life. Order directly via Metav Werkzeuge or consult our technical advisors for application recommendations. CNMG 190624 T9225 — Tungaloy indexable insert for turning, CVD‑coated, 2.4 mm radius The CNMG 190624 T9225 is a rhombic ISO‑standard indexable insert for turning, engineered for stable, productive machining of medium‑to‑heavy steel components with a THS chipbreaker. Robust CVD‑coated carbide grade T9225 Designed for medium to heavy steel turning THS chipbreaker for controlled chip formation Rhombic CNMG form with 2.4 mm corner radius Consistent cutting performance for demanding turning operations The insert is manufactured from carbide with a CVD coating, which increases wear resistance and stabilises edge life under variable cutting conditions. This combination delivers quantifiable benefits in machining: reduced flank wear and longer uninterrupted cutting intervals, which translate into higher process efficiency and fewer index changes. The THS chipbreaker is designed for predictable chip formation in interrupted or variable engagement, keeping cycle times steady and secondary operations minimal. For production environments where repeatability and uptime matter, this geometry and grade were selected to balance toughness and wear resistance. Secure fit and ISO compatibility for straightforward tooling integration ISO conformity means the insert is compatible with standard CNMG holders where form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic CNMG shape with an 80° main cutting angle and 0° clearance angle provides a reliable seating position; a cylindrical hole ensures stable clamping. These design aspects simplify tooling logistics and reduce setup time: compatible holders can be chosen from existing inventories, and repeatable seating reduces the risk of misalignment. The specification of 19 mm inscribed circle and 6.35 mm thickness supports robust engagement for heavier cuts. Material suitability and what the T9225 grade means in practice Grade T9225 is a universally applicable, robust grade indicated for mid‑to‑heavy machining of steel where changing engagement conditions or light interruptions demand additional toughness. In simple terms, the grade sacrifices some maximum hardness to gain resistance against chipping and edge breakdown—this is beneficial when tool life is compromised by interrupted cuts or variable workpiece rigidity. The carbide substrate and coating work together to maintain edge integrity while still delivering acceptable wear rates, reducing the frequency of index changes and unscheduled tool interventions. Practical selection advice and handling recommendations When selecting this insert, match the THS chipbreaker to the expected cut depth and feed to ensure the best chip control; sharper feeds at moderate depths favour continuous swarf, whereas heavier depths benefit from the chipformer’s geometry. Inserts are supplied ISO‑standard and should be mounted with the correct torque and a clean seating surface to ensure repeatable performance; spare screws and correct support pads are recommended for production spindown. For customers new to grade selection, choose T9225 for mixed production runs across different steel grades where resilience to variable cuts is valued over extreme wear resistance. For robust turning in mixed steel applications, trust the Tungaloy T9225 inserts and contact Metav Werkzeuge for tailored recommendations or to secure stock availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780686 Manufacturer SKU: TUN6780686 Stock SKU: 6780686-Tungaloy Model series: ISO turning indexable inserts Facts Inscribed circle size: 19 mm Plate thickness: 6.35 mm Corner radius: 2.4 mm Main cutting angle: 80° Clearance (relief) angle: 0° ISO designation: 190624 Special features Carbide material, CVD‑coated Grade T9225 Chipbreaker THS Rhombic CNMG form, with cylindrical hole Application: Turning (external and internal) ISO‑standard indexable insert, compatible with matching holders FAQ What materials is this insert suited to machine? The CNMG190624‑THS T9225 Tungaloy insert (SKU 6780686‑Tungaloy) is specified primarily for steel machining and performs well in medium‑to‑heavy turning where toughness is required. How does the THS chipbreaker affect chip control? The THS chipbreaker on the CNMG190624‑THS promotes controlled chip formation and safer evacuation during variable engagement, improving process stability for the T9225 grade insert. Can this insert be used for interrupted cuts? Yes, the T9225 grade is chosen for applications with changing engagement or light interruptions, providing enhanced toughness compared with more wear‑focused grades. Which holder dimensions must be observed for correct compatibility? Compatibility is determined by the insert form, inscribed circle (19 mm), thickness (6.35 mm), hole style and tolerance class; use a matching CNMG holder designed for ISO 190624 inserts. What benefits does the CVD coating provide compared with uncoated inserts? The CVD coating increases wear resistance and edge life under abrasive conditions, helping the CNMG190624‑THS T9225 insert sustain longer cutting intervals and improved overall productivity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 190624 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T9235, the ISO CNMG 190624 geometry and a 2.4 mm nose radius for dependable turning under interrupted or unstable cutting conditions; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. CNMG 190624 T9235 Turning insert (CNMG190624-THS) by Tungaloy — CVD-coated carbide, 2.4 mm radius The CNMG190624-THS T9235 is an ISO-standard rhombic turning insert intended for external and internal turning of steel, optimised for interrupted cuts and less stable machining setups. CVD-coated carbide grade T9235 for steel ISO CNMG 190624 geometry for wide compatibility 2.4 mm nose radius for robust profile Rhombic insert with cylindrical hole, 6.35 mm thick Reliable edge life and consistent process stability The CVD-coated carbide grade T9235 provides a tough cutting edge that favours stability in lower cutting-speed applications and during interrupted cuts. Thanks to the CVD coating, the insert shows improved resistance to built-up edge and wear, which translates into longer effective tool life and fewer interruptions on the production floor. For machining operations where process consistency is critical, the combination of a resilient substrate and a protective coating helps maintain surface finish and dimensional repeatability over longer runs. Geometry engineered for robust cutting and controlled chip flow The CNMG 190624 geometry delivers a balanced compromise between strength and versatility: the 2.4 mm nose radius supports a sturdy cutting profile for heavier engagement, while the THS chipbreaker helps to break and evacuate chips reliably in a range of turning tasks. The rhombic form and the 0° relief angle suit both finishing and roughing when the correct feeds and speeds are selected. These geometric choices reduce the risk of chipping in unstable setups and allow predictable cutting behaviour, which simplifies process tuning and reduces scrap rates. ISO compatibility and practical system integration As an ISO-standard insert, this turning grade integrates into common toolholding systems where compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness. Typical system components include a matching external holder or boring bar, a support shim or clamp set and replacement screws. For best results, match the THS chipbreaker and T9235 grade to the workpiece material and machining stability. For additional cutting data or holder recommendations, Metav Werkzeuge can provide technical guidance and machining parameter suggestions by e-mail or phone. Contact Metav Werkzeuge for personalised cutting data, availability of the Tungaloy CNMG190624-THS insert and advice on holder selection Technical data Article number: 6786038 Manufacturer SKU: TUN6786038 SKU: 6786038-Tungaloy Model series: ISO turning inserts Core dimensions Insert size: 19 mm Thickness: 6.35 mm Nose radius: 2.4 mm Relief angle: 0° Included angle: 80° Features and material Material: carbide Grade / coating: T9235, CVD-coated carbide Chipbreaker: THS Insert form: rhombic Hole: with cylindrical hole Application: turning (external and internal) System components: matching holder, shim/clamp set, replacement screws FAQ What materials is this insert designed for? The CNMG190624-THS insert in grade T9235 is formulated for machining steel; the T9235 grade is engineered to perform reliably in lower cutting-speed and interrupted-cut scenarios. Which chipbreaker is fitted and what is its purpose? This insert features the THS chipbreaker, which promotes effective chip control and improved evacuation during turning, reducing the chance of entanglement and aiding surface integrity. How to ensure holder compatibility for this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; match the CNMG 190624 geometry with a corresponding external holder or boring bar and the appropriate clamp set. Is the insert suitable for interrupted cuts and unstable conditions? Yes, the CVD-coated T9235 carbide and the robust CNMG geometry are chosen specifically to deliver improved resistance to chipping and wear under interrupted or less stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 250924 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, fracture toughness and ISO compatibility for uninterrupted production in medium-steel turning; the CNMG250924-THS T9215 insert delivers reliable edge life and stable chip control — order the CNMG250924-THS T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG250924-THS T9215 Tungaloy — CNMG 250924 turning insert, CVD-coated carbide, 2.4 mm corner radius The CNMG250924-THS T9215 is an ISO-standard rhombic indexable turning insert designed for medium-steel turning, offering a CVD-coated carbide grade that balances wear resistance with toughness for continuous to lightly interrupted cuts. ISO rhombic CNMG 250924 geometry CVD-coated carbide grade T9215 2.4 mm corner radius for reliable edge Compatible with standard CNMG holders Increased productivity through wear-resistant coating and grade The CVD-coated carbide composition in this insert provides a measurable increase in tool life during repetitive turning cycles, reducing downtime for changeovers. The T9215 grade is tuned for medium steel, combining abrasion resistance with fracture toughness so that feeds and cutting speeds can be raised within stable setups. This translates into fewer tool changes and a better cost-per-part ratio for serial production. Consistent fit and simple integration into ISO tool systems The CNMG 250924 geometry conforms to ISO norms, ensuring interchangeability with established holders and tool posts. The rhombic form with an 80° included angle and 0° relief simplifies seat and clamping decisions; the insert's cylindrical hole allows secure fastening with standard screws and clips. Compatibility with common clamping systems reduces setup time and avoids the need for special adaptations. Secure cutting edge and controlled chip formation A 2.4 mm corner radius provides a robust cutting edge that tolerates moderate interruptions and higher feedrates while maintaining dimensional stability. The THS chipbreaker is matched to the grade to promote short, controllable chips on steel grades, which improves surface finish and reduces the risk of edge chipping. In practice, this means more consistent part quality and fewer rejects in series machining. Practical system advice for straightforward application The insert functions as part of a system: an ISO indexable insert, a matched external holder or boring bar, a subplate/clamping set and replacement screws. For turning operations, choose the chipbreaker and grade combination according to workpiece material and process stability; T9215 is recommended as the first choice for mid-range steels in continuous to slightly interrupted cuts. Technical queries on feeds, speeds or holder matches can be clarified to ensure optimal performance. Contact Metav Werkzeuge for application guidance or to request an offer for the CNMG250924-THS T9215 insert; Metav Werkzeuge’s consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6773843-Tungaloy Manufacturer article number: 6773843 SKU (manufacturer): TUN6773843 Material: carbide Coating/grade: CVD-coated, T9215 Application: turning (Drehen) Facts ISO designation: CNMG250924-THS Inscribed circle/size: 25 mm Thickness: 9.52 mm Corner radius: 2.4 mm Included angle: 80° Relief angle: 0° Special features Rhombic plate form (CNMG) Chipbreaker: THS Cylindrical hole (with hole) ISO-compatible geometry and tolerance class Suitable for medium steel, continuous to light interrupted cuts FAQ What materials is this insert suitable for? The CNMG250924-THS T9215 insert and its T9215 CVD-coated carbide grade are intended primarily for medium-steel machining and perform well in continuous to slightly interrupted turning operations. Does the insert fit standard CNMG holders? Yes, the CNMG250924 geometry conforms to ISO norms and is compatible with standard CNMG external holders and boring bars when the holder matches the plate form, thickness and clamping method. What is the purpose of the THS chipbreaker? The THS chipbreaker is configured to produce short, controlled chips in steel turning, improving surface finish and reducing the likelihood of chip entanglement or edge damage during continuous machining. How does the 2.4 mm corner radius affect performance? A 2.4 mm corner radius increases edge strength and stability, allowing higher feedrates under stable conditions and offering better resistance to chipping in slightly interrupted cuts. Which system components are needed for correct assembly? A complete system comprises the ISO insert, a matching external holder or boring bar, a subplate or clamping set and the appropriate replacement screws; correct matching of these parts ensures proper seating and repeatable accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 250924 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD-coated carbide and the generous 2.4 mm nose radius to maintain cutting stability and predictable tool life in medium-to-heavy turning operations; order via Metav Werkzeuge or consult their specialists for grade and chipbreaker selection. CNMG250924-THS T9225 — CNMG turning insert (ISO 250924) by Tungaloy CNMG250924-THS T9225 is an ISO‑standard indexable insert designed for demanding turning tasks, offering a robust CVD coating and geometry for stable metal removal CVD-coated carbide grade T9225 for robust turning 2.4 mm nose radius for stable chip control ISO CNMG 250924 rhombic insert, 9.52 mm thickness Cylindrical-hole design with 0° clearance angle Higher productivity through a tougher universal grade The T9225 grade is a CVD-coated carbide engineered as a universal, tough solution for medium-to-heavy steel turning. Its composition balances wear resistance and fracture toughness, which helps when encountering variable engagement conditions or slightly interrupted cuts. For machine shops facing mixed batch work, this combination reduces unscheduled tool changes and supports a more consistent process window. Geometry engineered for repeatable accuracy and secure clamping The rhombic CNMG form and the 2.4 mm nose radius provide a compromise between strength and finishing capability: a larger nose radius improves stability and surface quality under heavier cuts, while the plate’s 9.52 mm thickness and cylindrical hole enable positive, repeatable clamping. The insert’s 0° clearance angle and ISO dimensions ensure compatibility with standard CNMG holders when form, free angle, tolerance class, fastening method, size and thickness match. This results in improved rigidity and reduced vibration at the tool tip. Practical guidance for shop-floor integration and cost efficiency Designed for external and internal turning, the insert is intended to be used with the matched holder, shim/clamping set and replacement screws as a system. Selecting the correct THS chipbreaker and the T9225 sort for the workpiece material will optimise chip control and surface finish, especially when machining steels. Clear labelling and ISO conformity simplify inventory management and help maintain process reliability, supporting smoother production flow and lower total machining cost through predictable performance. Contact Metav Werkzeuge for application advice on Tungaloy inserts and to confirm the ideal chipbreaker and holder combination for the intended turning task — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6780687 SKU: 6780687-Tungaloy Manufacturer SKU: TUN6780687 Manufacturer: Tungaloy Facts ISO designation: 250924 Inscribed circle / size: 25 mm Thickness: 9.52 mm Nose radius: 2.4 mm Clearance angle: 0° Plate angle: 80° Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T9225 Chipbreaker: THS Plate form: rhombic Application: turning (external and internal) System: ISO indexable plate for standard CNMG holders FAQ What materials is this insert best suited for? This CNMG250924-THS T9225 insert is optimised for medium-to-heavy steel turning and performs well where interrupted cuts or varying engagement demand extra toughness. Does the insert fit standard CNMG holders? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; the CNMG250924-THS follows ISO dimensions for use with matching CNMG holders. Which chipbreaker should be selected for mixed turning tasks? The plate comes with the THS chipbreaker; for mixed or heavier steel operations the THS geometry combined with the T9225 grade gives reliable chip control and stability. How does the CVD coating benefit production runs? The CVD coating increases wear resistance on the rake and flank, extending tool life under continuous and slightly interrupted cutting conditions and promoting consistent surface quality. Is this insert suitable for finishing passes? With its 2.4 mm nose radius and rhombic geometry the insert can achieve acceptable finishes on heavier cuts; for fine finishing, a smaller radius or dedicated finishing grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 250924 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, CVD‑coated carbide T9235 and a robust 2.4 mm nose radius for productive turning in steel; order the insert directly via Metav Werkzeuge or request application advice from the technical consultants. CNMG 250924 T9235 CNMG250924-THS indexable turning insert by Tungaloy — CVD-coated carbide, 2.4 mm radius CNMG250924-THS — a rhombic indexable insert designed for general turning in steel under unstable or interrupted cutting conditions ISO‑norm compatible insert for standard holders CVD‑coated tough grade T9235 for steel 80° rhombic form for external and internal turning Cylindrical hole for secure clamping Reliable cutting performance for steel turning The insert is manufactured as a CVD‑coated carbide grade T9235, a tough formulation optimised for machining steel at lower cutting speeds and in less stable set-ups. The CVD coating enhances thermal and abrasive resistance, while the carbide substrate provides core toughness; together these properties reduce edge degradation during interrupted cuts and extend effective tool life. This balance supports consistent material removal and contributes to stable process windows in medium‑duty turning operations. Geometry and clamping that improve process security Configured in a rhombic CNMG form with an 80° included angle and a 2.4 mm nose radius, the insert offers a compromise between cutting edge strength and surface finish. The 9.52 mm plate thickness and the cylindrical hole with matching clamping ensure secure seating in standard ISO holders, minimising micro‑movement under load. The chipbreaker style THS shapes chip flow for typical steel applications, reducing risk of built‑up edge and easing chip evacuation, which supports uninterrupted cycle times and more predictable component quality. Practical productivity guidance for workshop use Integration into a cutting system requires a suitable holder, clamp set and replacement screws; the ISO series design simplifies selection among commercially available external holders. For best results with T9235, select conservative cutting speeds when encountering long chips or heavy interruptions, and consider modest depth of cut increases once stability is confirmed. The insert is intended for turning operations where robustness and repeatability are priorities rather than maximum cutting speed, so process adjustments normally focus on feed and depth rather than speed escalation. Cost‑effectiveness through repeatable performance The combination of a tough carbide substrate and CVD surface treatment yields a predictable wear progression that supports repeatable part quality and tool life assessment. In production environments with variable cutting conditions, this insert reduces the frequency of unexpected tool changes and contributes to overall machining efficiency. Specification in production lists and toolkits is straightforward thanks to the ISO designation, enabling fast replacements and consistent stock handling. For application-specific recommendations or to specify the Tungaloy CNMG 250924 T9235 insert for a machining task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to obtain tailored advice and delivery options. Technical data Article number: 6786032 Manufacturer SKU: TUN6786032 Listing SKU: 6786032-Tungaloy Designation: CNMG250924-THS Dimensions & core data Shape: rhombic Size: 25 Thickness: 9.52 mm Nose radius: 2.4 mm Relief angle: 0° Included angle: 80° Hole: cylindrical Chipbreaker: THS Materials & features Material: carbide Coating: CVD, grade T9235 Application: turning Intended for: steel Series: ISO turning inserts System components: indexable insert, holder, clamp set and screws FAQ What materials is this insert suited for? The insert is specified for machining steel; the T9235 CVD‑coated carbide grade is formulated to handle interrupted cuts and unstable conditions typical in steel turning. How does the CNMG geometry affect machining? The rhombic CNMG shape with an 80° included angle and 2.4 mm nose radius provides a balance between edge strength and finish quality, making it suitable for general external and internal turning tasks. Which chipbreaker does the insert use and why? This designation uses the THS chipbreaker, which directs chip flow and helps control chip formation in typical steel applications, reducing the likelihood of built‑up edge and easing evacuation. Is the insert compatible with standard toolholders? Yes, the ISO‑series CNMG form and the cylindrical hole allow compatibility with many standard holders; secure clamping depends on matching holder geometry, tolerance class and fastening hardware. How to identify the correct spare part for reordering? Refer to the designation CNMG250924-THS, the article number 6786032 or the manufacturer SKU TUN6786032 when specifying replacements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120402 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance and ISO compatibility for faster cycle times and predictable tool life; select the matching chipbreaker and holder to ensure consistent chip control. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMM120402 DX120 CNMM ISO turning insert (PCD, with cylindrical hole) by Tungaloy CNMM120402 DX120 is an ISO-form turning insert engineered for high-speed machining of aluminium and other non-ferrous materials. PCD cutting edge for high cutting speeds Designed for aluminium and non-ferrous metals ISO-form CNMM 120402 for wide holder compatibility Long tool life and consistent chip control Increase throughput with polycrystalline diamond performance The PCD cutting layer in this insert enables significantly higher cutting speeds when machining aluminium and similar materials, reducing cycle times while maintaining surface quality. The DX120 grade is formulated for abrasive non-metals and non-ferrous alloys, delivering long tool life and low flank wear compared with conventional carbide grades. For production environments focused on cost per part, the greater longevity of the diamond edge translates into fewer tool changes and more stable processes, which improves overall equipment effectiveness. Seamless integration into ISO tooling systems Built to the ISO CNMM 120402 form, the insert matches standard CNMM pockets when the holder geometry, clearance, tolerance class, clamping and thickness are compatible. The presence of a cylindrical hole permits secure screw clamping in suitable holders, while the 12 mm size and 4.76 mm thickness offer a robust support area that reduces vibration in many turning operations. This standardised format simplifies stock management and reduces set-up variability, enabling faster changeovers and reliable repeatability across batches. Stable chips and predictable surface finish The DIA chipbreaker geometry provides controlled chip formation for secure evacuation and consistent contact conditions at the cutting edge. Combined with the hard PCD surface on a carbide backing, this construction supports high feed rates with improved dimensional stability and enhanced surface appearance. For intermittent cuts or sections with variable cross-section, the chip control contributes to fewer interruptions and reduced risk of built-up edge, which in turn lowers rework and inspection effort. Practical selection and application guidelines Select the chipbreaker and grade according to workpiece material, machining strategy and machine stability; the DX120 grade is optimised for turning of aluminium, non-ferrous metals and abrasive non-metals but is not intended for hardened steels. Ensure holder compatibility by checking the seat form, clearance angle and clamping method before mounting the insert. When correctly matched to the application, the combination of PCD cutting edge and ISO conformity improves cycle consistency and tool-change predictability, supporting more efficient process planning. Discuss your machining requirements with Metav Werkzeuge to specify the right DX120 PCD inserts and holder combinations; call +49 2822 7131930 or email info@metav-werkzeuge.com for a technical consultation Technical data Article number: 6822155 Manufacturer SKU: TUN6822155 Product designation: CNMM120402-DIA DX120 Tungaloy insert Series: ISO turning inserts Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included hole: with cylindrical hole Insert angle: 80° Clearance angle: 0° Materials & features Cutting material: PCD (polycrystalline diamond), grade DX120 Substrate material: carbide Chipbreaker: DIA Shape: rhombic (CNMM) Application: turning Model series: ISO turning inserts Manufacturer: Tungaloy FAQ Is this insert suitable for aluminium machining? Yes. The CNMM120402-DIA DX120 Tungaloy turning insert uses a PCD cutting edge designed specifically for aluminium, non-ferrous metals and abrasive non-metals, enabling high cutting speeds and extended tool life (SKU TUN6822155). How is compatibility with a holder determined? Compatibility depends on the insert form, clearance angle, tolerance class, clamping method, size and thickness. The ISO CNMM 120402 form and the cylindrical hole allow use in holders that accept CNMM inserts and screw clamping. Can the DX120 grade be used for steel or hardened materials? No. The DX120 PCD grade is optimised for non-ferrous and abrasive non-metals; it is not suitable for machining hardened steels or high-alloy steels where alternative carbide or coated solutions are required. What chip control can be expected from the insert? The DIA chipbreaker provides stable chip formation and evacuation, improving surface finish and reducing interruptions in continuous turning operations when paired with the correct feeds and speeds. How is the insert secured in the tool? The insert is supplied with a cylindrical hole for screw clamping; ensure the selected holder matches the CNMM seat and clamping arrangement to guarantee secure fixation and optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120404 DX120 Wendeplatten - Tungaloy
The combination of polycrystalline diamond cutting material and an ISO‑compliant geometry delivers faster cycle times and significantly longer tool life for non‑ferrous turning tasks; the DX120 grade is especially effective on aluminium and abrasive non‑metals. Order directly via Metav Werkzeuge or consult their technical team for matching holders and grade selection. CNMM 120404 DX120 — Turning indexable insert for turning, Tungaloy The CNMM120404 DX120 is an ISO‑standard rhombic indexable insert with a polycrystalline diamond grade for high‑speed external and internal turning of aluminium and other non‑ferrous materials. Polycrystalline diamond DX120 grade ISO rhombic CNMM120404 geometry Optimised for aluminium machining Single‑sided chipbreaker for stable chips High‑speed machining with durable PCD performance The DX120 grade uses polycrystalline diamond (PCD) as the cutting material, offering high cutting speeds and long tool life when machining aluminium and other non‑ferrous alloys. PCD delivers a very hard, wear‑resistant cutting edge that reduces flank and crater wear compared with conventional carbide in these materials, so machining quality is maintained over extended production runs. This leads to measurable savings in tool consumption and fewer interruptions for tool changes, supporting higher overall throughput. ISO compatibility and secure clamping reduce setup time Manufactured to the ISO designation CNMM120404, the insert features a rhombic form with an 80° included angle, a 0° clearance angle and a plate thickness of 4.76 mm, ensuring predictable engagement with compatible holders. The insert is supplied with a cylindrical hole, allowing positive location and reliable clamping in standard indexable‑insert holders. Because compatibility is governed by form, clearance angle, tolerance class, fastening and thickness, the standardised geometry simplifies holder selection and minimises setup iterations on the machine. Productivity benefits and process reliability in turning operations The single‑sided chipbreaker provides consistent chip control for typical turning operations, reducing the risk of built‑up edge and enabling smoother evacuation of swarf in aluminium machining. This yields productivity gains through fewer stoppages and better surface finish per pass. For mixed batch production or long runs where tool life and repeatability matter, the insert helps lower the cost per part while maintaining consistent dimensional and surface quality. Metav Werkzeuge can advise on the most suitable holder and clamping set for a given machine and application to ensure optimal results. For reliability in high‑speed aluminium turning with Tungaloy’s PCD grade, contact Metav Werkzeuge for tailored advice and rapid supply. Technical Data Designation: CNMM120404 DX120 Tungaloy‑indexable insert Manufacturer item number: 6822156 SKU: 6822156-Tungaloy Manufacturer SKU: TUN6822156 Facts Corner radius: 0.4 mm Size: 12 mm Thickness: 4.76 mm Wedge/included angle: 80° Clearance angle: 0° Hole: cylindrical (with hole) Special features Cutting material: polycrystalline diamond (PCD), grade DX120 Substrate: carbide Shape: rhombic indexable insert Chipbreaker: single‑sided ISO series: ISO turning indexable inserts Typical application: external and internal turning of aluminium, non‑ferrous and abrasive non‑metals FAQ Which materials is this insert designed for? The CNMM120404 DX120 insert is designed primarily for aluminium, other non‑ferrous metals and abrasive non‑metals, using the DX120 PCD grade to maintain wear resistance and cutting performance. Is the insert compatible with standard CNMM holders? Yes. The CNMM120404 geometry follows ISO standards so it fits holders designed for CNMM inserts, provided the holder matches the form, thickness and clamping style. What advantage does the DX120 PCD grade offer over carbide? The DX120 PCD grade offers substantially higher wear resistance and longer tool life when machining non‑ferrous materials, resulting in fewer tool changes and more consistent surface finish over long production runs. Does the chipbreaker support stable chip control for finishing passes? The single‑sided chipbreaker on this insert promotes predictable chip formation and evacuation, helping to achieve consistent finishes during both roughing and finishing passes with stable cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com