CNMM 190612 T9235 Wendeplatten - Tungaloy
Benefit from a combination of CVD‑coated performance, a robust 1.2 mm corner radius, and ISO compatibility for consistent turning results. The grade T9235 provides durable cutting life in unstable or interrupted cuts, while the CNMM190612 form ensures fit across standard holders. Order or request advice via Metav Werkzeuge for seamless tool integration. CNMM 190612 T9235 Tungaloy indexable turning insert — CVD‑coated carbide, 1.2 mm corner radius The CNMM190612 T9235 is an ISO‑standard indexable insert for external and internal turning, optimised for interrupted cuts and unstable machining conditions CVD-coated carbide grade T9235 Suited for Stahl, unstable and interrupted cuts Rhombic CNMM form, 80° included angle 1.2 mm corner radius and cylindrical hole Consistent performance in interrupted turning The CVD‑coated substrate with grade T9235 delivers reliable wear resistance and a predictable flank life, particularly when cutting Stahl at moderate speeds. The coating reduces adhesion and improves edge integrity, which translates into fewer tool changes and more productive machine time. This design is especially beneficial where cuts are frequently interrupted or where rigidity is limited, offering a measurable uplift in process stability without complex parameter changes. Clear advantages for chip control and surface finish Equipped with a one-sided chipbreaker, the insert promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface integrity. The combination of a 1.2 mm corner radius and the chipbreaker geometry allows for a balance between strength at the cutting edge and achievable surface finish, meaning a stable feed strategy can be used to maintain component tolerances while avoiding excessive cutting forces. System compatibility that simplifies setup and repeatability As an ISO‑standard rhombic insert with a 80° included angle and 0° clearance, the CNMM form is widely compatible with common external holders and boring bars. The 6.35 mm thickness and the presence of a cylindrical hole provide secure mounting and repeatable seating, which helps to reduce setup variance and downtime. Choosing an ISO‑specified insert streamlines inventory and makes tool changes straightforward across multiple machines. Application guidance and expected benefits Designed primarily for turning operations, the insert performs best when matched with the appropriate stable holder and cutting parameters tuned for Stahl machining. Selecting the T9235 grade is a pragmatic choice where tool life under interrupted cuts is a priority; the result is improved process reliability and lower per‑part tooling cost through extended service intervals. For users seeking predictable outcomes in mixed production runs, this insert offers robustness without compromising adaptability. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy CNMM190612 inserts and to secure the correct T9235 grade for specific turning tasks Technical data Article number: 6785878 SKU: 6785878-Tungaloy Manufacturer SKU: TUN6785878 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Designation: CNMM190612 Facts Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Thickness: 6.35 mm Size: 19 mm Special features Grade: T9235 (CVD-coated carbide) Chipbreaker: one-sided Hole: with cylindrical hole Shape: rhombic (CNMM) Application: Turning (external and internal) Standard: ISO‑compliant insert FAQ What machining tasks is this insert best suited for? The insert is intended for external and internal turning; the CNMM190612 geometry and T9235 grade are optimised for interrupted cuts and less stable machining of Stahl. How does the T9235 grade affect tool life? The T9235 CVD coating enhances wear resistance and edge robustness, which increases tool life in interrupted operations compared with uncoated grades. Can the insert be used in standard CNMM holders? Yes, the ISO‑standard CNMM190612 form, 6.35 mm thickness, and cylindrical hole provide compatibility with standard external holders and boring bars designed for CNMM inserts. What chip control can be expected from the insert? The one-sided chipbreaker promotes predictable chip formation and evacuation, improving surface finish and reducing the likelihood of built‑up edge during turning of Stahl. Is the insert suitable for high‑speed turning? The T9235 grade is formulated for robust performance at moderate cutting speeds and interrupted cuts; for sustained high‑speed applications, evaluation of cutting parameters is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9215 Wendeplatten - Tungaloy
Combine the high wear resistance of the T9215 grade with a robust 80° rhombic geometry and a 1.6 mm corner radius to achieve stable, productive turning of medium steels. Order the insert directly via Metav Werkzeuge or contact their advisors for holder compatibility and application support. CNMM 190616 T9215 — ISO turning insert for turning applications by Tungaloy CNMM190616 T9215 is a rhombic, ISO‑norm indexable insert designed for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness for continuous to light interrupted cuts CVD-coated carbide T9215 80° rhombic geometry for strength 1.6 mm corner radius for durability Single-sided chipbreaker for medium steels High productivity through a balanced cutting grade The T9215 grade is a CVD‑coated carbide developed for efficient machining of medium‑hard steels. Its coating increases wear resistance, while the substrate delivers the necessary toughness to withstand intermittent load peaks. As a result, productivity rises through longer tool life and fewer insert changes, making the solution particularly suitable for medium‑batch production where consistent throughput and predictable tool behaviour are priorities. The formulation is optimised to maintain cutting performance across continuous and lightly interrupted turning operations. Geometry and clamping for process stability The rhombic plate with 80° geometry and a 1.6 mm corner radius gives an advantageous compromise between edge strength and accessibility. The 80° included angle improves edge support, reducing the risk of edge chipping when encountering changes in section, while the corner radius helps distribute cutting forces to prolong edge life. Compatibility with a holder depends on the insert’s form, clearance angle, tolerance class, mounting type, size and thickness; correct pairing of holder and insert ensures secure clamping and repeatable positioning for accurate, vibration‑resistant turning. Improved surface finish and predictable tool life Selecting an insert with an appropriate chipbreaker and the T9215 grade supports a consistent surface finish and reduced downtime. The single‑sided chipbreaker is tailored for medium‑steel cutting, helping to form manageable chips and stabilise cutting forces. Stable chip control and reduced flank wear lead to measurable gains in tool life, which lowers cumulative machining costs in continuous production runs. For operations prioritising surface integrity, the combination of geometry and coating helps achieve repeatable results without sacrificing productivity. System approach: selection and application guidance An indexable insert is one component of a complete cutting system: an ISO turning insert must be used with a matching external holder or boring bar, a suitable shim or clamping set and the correct mounting screw. The CNMM190616 designation and the insert’s hole style (cylindrical hole) should be matched to the toolholder seat and screw pattern. For medium steels and mixed production, choose the chipbreaker and grade that correspond to stability and cutting mode; for severe interruptions or heavy depths of cut, consider a smaller overhang and more rigid holder arrangements. The CNMM190616 T9215 insert is intended for turning tasks where a robust edge and reliable wear performance are required. Contact Metav Werkzeuge for tailored recommendations on Tungaloy T9215 inserts, holder compatibility and to secure the correct shims and spare screws for the intended turning application Technical data Article number: 6773839 SKU: 6773839-Tungaloy Manufacturer SKU: TUN6773839 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 19 mm Special features Grade: T9215 (CVD-coated carbide) Shape: rhombic Chipbreaker: single-sided Hole: with cylindrical hole Application: turning Recommended for: medium steel, continuous to light interrupted cuts FAQ What materials is this insert intended for? The CNMM190616 T9215 Tungaloy indexable insert is designed primarily for medium steels; the T9215 grade combines wear resistance and toughness for continuous to light interrupted turning. How does the 80° geometry influence machining? An 80° geometry increases edge support and mechanical strength, which benefits interrupted cuts and applications where rigidity and tool life are required. Which holders are compatible with this insert? Compatibility is defined by the insert form, relief angle, tolerance class, mounting style, size and thickness; match the CNMM190616 seat and the cylindrical hole to the toolholder and clamping screw pattern. Can this insert be used for internal turning? Yes, the indexable design permits both external and internal turning operations provided the correct boring bar or internal holder and proper tool setup are used with the CNMM190616 T9215 insert. Why choose the T9215 grade over other grades? The T9215 CVD‑coated carbide grade offers a balanced combination of wear resistance and fracture toughness, making it suitable where productive machining and consistent tool life are needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide reliability, 1.6 mm corner radius stability and ISO compatibility for consistent, productive turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNMM 190616 T9215 — ISO indexable turning insert for medium-steel turning by Tungaloy The CNMM190616 T9215 is an ISO-standard, rhombic 80° indexable insert designed for external and internal turning where productivity and wear resistance are required. CVD-coated carbide grade T9215 ISO CNMM190616, rhombic 80° shape 1.6 mm corner radius for stable cuts Single-sided chipbreaker, with cylindrical hole Reliable performance for medium-steel production turning The insert is manufactured from carbide with a CVD-coated surface that combines wear resistance and fracture toughness, making it a strong choice for medium-steel applications. The T9215 grade is intended as a first choice where a balance of tool life and edge stability is required; this supports higher material removal rates and consistent part finish even in continuous to lightly interrupted cuts. The engineered grade reduces unplanned downtime and contributes to predictable cycle times, which is essential for efficient production planning. Designed for straightforward integration into ISO tooling systems As an ISO-specification insert, compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 80° geometry and 0° relief angle permit both external and internal turning operations in a wide range of setups. The insert is supplied with a cylindrical centre hole for secure seating and is typically used with the appropriate outer holder or boring bar, plus an underlay/clamping kit and replacement screws as required. Selecting the correct single-sided chipbreaker and matching grade to the workpiece material ensures stable chip formation and reduces the likelihood of edge chipping. Material, dimensions and coating that extend usable life Key dimensional and material characteristics support robust machining: a 1.6 mm corner radius to improve edge strength, a plate thickness of 6.35 mm for stiffness, and a nominal plate size of 19 mm in a rhombic form. The CVD coating provides a hard, wear-resistant layer optimised for abrasion and adhesive wear mechanisms encountered in steel cutting. This combination of geometry and coating translates into longer effective tool life, improved surface quality and reduced tool-change frequency — all factors that contribute to lower unit production costs and higher throughput. The CNMM190616 T9215 insert is therefore suitable where repeatable, reliable performance is required across batch and continuous production runs. For application advice or rapid supply of Tungaloy inserts, contact Metav Werkzeuge quoting SKU TUN6772209 via info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation and delivery options Technical data Article number: 6772209 SKU: 6772209-Tungaloy Manufacturer SKU: TUN6772209 Model series: ISO indexable turning inserts Designation: CNMM190616 Grade: T9215 Material: carbide Coating: CVD Core data Corner radius: 1.6 mm Insert angle: 80° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 19 mm Design and features Plate form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: single-sided Application: turning FAQ What materials is this insert suited for? The CNMM190616 T9215 insert (Tungaloy, SKU TUN6772209) is optimised for medium steel machining and performs well in continuous to lightly interrupted cutting conditions. Which holder characteristics ensure correct compatibility? Compatibility is governed by the holder form, relief angle, tolerance class, fastening method, size and thickness; matching these to the ISO CNMM190616 geometry ensures proper clamping and stability for turning tasks. How does the T9215 grade affect productivity? The T9215 CVD-coated carbide offers a balance of wear resistance and fracture toughness, enabling higher sustained cutting rates while maintaining surface quality and longer tool life. What is the purpose of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength and reduces the risk of chipping, delivering more stable cuts and improved tool longevity in production environments. Can this insert be used for interrupted cuts? Yes; the CNMM190616 T9215 insert is suitable for continuous and lightly interrupted cuts; for heavy interruptions, review holder rigidity and cutting parameters to ensure edge protection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, ISO conformity and a 1.6 mm corner radius for reliable medium to heavy turning performance; order the CNMM190616 T9225 insert directly via Metav Werkzeuge or consult the product specialists if needed. CNMM190616 T9225 – Turning insert, CVD-coated carbide, 1.6 mm radius (Tungaloy) CNMM190616 T9225 is an ISO-standard rhombic turning insert engineered for external and internal turning operations where robustness and consistent chip control are required. CVD-coated carbide grade T9225 Rhombic ISO CNMM shape, 80° geometry 1.6 mm corner radius for robust edges 6.35 mm thickness for increased stability Consistent productivity for demanding turning operations The CNMM190616 insert is built on a CVD-coated carbide substrate and the T9225 grade, delivering a balance of toughness and wear resistance that suits medium to heavy Stahl machining. The combination of coating and substrate reduces flank wear and extends tool life under variable engagement and slightly interrupted cuts, which contributes directly to higher uptime and lower tooling costs. The result is more predictable process windows and improved cycle-time consistency when compared with uncoated or less resilient grades. Secure mounting and geometry for stable results Designed to the ISO CNMM form with an 80° included angle and a cylindrical hole, the insert offers reliable seating in compatible holders. The 6.35 mm thickness and 1.6 mm corner radius increase mechanical stability and edge strength, which reduces the risk of edge chipping in heavier cuts. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening and size; these parameters ensure correct clamping, repeatable positioning and consistent cutting geometry for predictable surface finish and dimensional control. Practical selection and operational benefits The single-sided chipbreaker is matched to the universal T9225 grade, enabling efficient chip formation across a broad range of steels and common turning tasks. When paired with an appropriate external holder or boring bar and the correct cutting parameters, the insert supports smoother chip evacuation, reduced built-up edge and improved consistency of the finished component. For shops seeking a pragmatic balance between cutting performance and tool life, this solution reduces changeover frequency and simplifies inventory management. For robust medium-to-heavy turning tasks, rely on Tungaloy’s CVD-coated T9225 CNMM190616 insert — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781299 Manufacturer SKU: TUN6781299 Stock SKU: 6781299-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMM190616 T9225 Tungaloy insert Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Geometry: 80° Relief angle: 0° Hole style: cylindrical hole Special features Material: carbide (CVD-coated) Grade: T9225 Plate shape: rhombic (CNMM) Chipbreaker: one-sided Suitable for: external and internal turning Typical system: ISO insert, matching external holder or boring bar, backing/clip set and replacement screws Compatible with holders selected by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMM190616 T9225 insert is a CVD-coated carbide grade engineered as a robust universal solution for medium to heavy Stahl machining, offering good performance in variable engagement and slightly interrupted cuts. Which dimensions and mounting details are relevant for machine setup? Key dimensions are 19 mm size, 6.35 mm thickness, 1.6 mm corner radius and an 80° rhombic geometry; the insert uses a cylindrical hole for secure clamping and is identified by manufacturer SKU TUN6781299. How should the chipbreaker and holder be chosen? Select the chipbreaker and holder based on the workpiece material, machining type and required stability; compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness to ensure proper seating and cutting geometry with the CNMM190616 insert. Is this insert suitable for interrupted cuts or heavy engagement? Yes — the T9225 grade provides added toughness for interrupted cuts and heavier engagements, improving resistance to chipping and delivering reliable performance in demanding turning cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide toughness, a 1.6 mm corner radius and ISO compliance for consistent medium-to-heavy steel turning; order the CNMM 190616 T9225 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMM 190616 T9225 — ISO rhombic indexable insert for turning — Tungaloy CNMM 190616 T9225 is an ISO rhombic indexable insert designed for external and internal turning, offering robust performance in medium to heavy steel machining ISO rhombic insert CNMM 190616 CVD-coated carbide grade T9225 1.6 mm corner radius for robust cuts Single-sided chipbreaker, with cylindrical hole Consistent cutting performance for medium to heavy steel The combination of a CVD-coated carbide substrate and the T9225 grade provides an engineered balance of hardness and toughness, optimised for the variable demands of medium to heavy steel turning. The 1.6 mm corner radius increases edge strength under heavier depths of cut and intermittent engagement, reducing edge failure and supporting longer tool life. This grade is intended where slightly interrupted cuts or changing engagement demand additional toughness rather than only maximum wear resistance. The result is more predictable performance across batch runs and hardened production cycles. Geometry and clamping that simplify setup and accuracy The rhombic geometry with an 80° included angle and a 0° clearance promotes versatile insert positioning for both external and internal turning applications. Compatibility with a holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert forms part of a system comprising an ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. The 6.35 mm thickness and the central cylindrical hole ensure secure clamping and repeatable seating, which stabilises cutter engagement and helps maintain dimensional accuracy in serial production. Shop-floor advantages that raise productivity and finish quality A single-sided chipbreaker tailored to the grade and geometry assists chip formation and evacuation under heavier feeds, improving process stability and reducing rework. Secure clamping via the cylindrical hole minimises insert movement during interrupted cuts, translating to fewer insert changes and higher uptime. Together, these attributes support a reduction in cycle times and help deliver a consistent surface finish, making the insert a practical choice for production departments seeking dependable throughput with predictable maintenance intervals. Material scope and recommended applications The CNMM 190616 T9225 insert is targeted at turning steel in medium to heavy machining tasks where robustness is essential. The CVD-coated surface provides enhanced wear resistance while the substrate toughness resists chipping under less favourable cutting conditions. For best results, select a matching chipbreaker and a holder that provides stable support; the insert is suitable for both external and internal turning operations and adapts well to jobs with variable engagement and interrupted cuts. For reliable supply and application guidance for Tungaloy CNMM 190616 T9225 inserts, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for ordering and machining recommendations Technical Data Article number: 6781239 Manufacturer SKU: TUN6781239 Dealer SKU: 6781239-Tungaloy Model series: ISO turning indexable inserts Designation: CNMM190616 Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Special features CVD-coated carbide grade T9225 Rhombic plate form Single-sided chipbreaker Cylindrical hole for secure clamping ISO-compliant series for turning Application: medium to heavy steel machining Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ Which materials are best processed with this insert? The CNMM 190616 T9225 insert is optimised for medium to heavy steel machining; the CVD-coated carbide and the T9225 grade combine wear resistance and toughness for these materials. What is the corner radius and why does it matter? The insert has a 1.6 mm corner radius, which increases edge strength for heavier cuts and intermittent engagement, helping to avoid chipping and extend tool life. How can I ensure compatibility with my holder? Compatibility depends on the insert form, clearance angle, tolerance class, clamping method, size and thickness; the CNMM190616 designation and the ISO series should be matched to a compliant holder and the appropriate shim/clamping set. Is the chipbreaker suitable for interrupted cuts? Yes; the single-sided chipbreaker paired with the T9225 grade supports controlled chip formation under heavier feeds and interrupted cutting conditions. Can this insert be used for internal boring as well as external turning? Yes, the ISO rhombic geometry and the central cylindrical hole allow use in both external turning and internal boring when mounted in a compatible boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust T9225 CVD‑coated carbide grade and the ISO‑compliant CNMM190616 form, delivering stable chip control and extended life in medium to heavy steel turning; order via Metav Werkzeuge or consult their experts for application support. CNMM 190616 T9225 turning insert — Tungaloy (rhombic, 19 × 6.35 mm) The CNMM190616 T9225 turning insert by Tungaloy is an ISO‑compatible rhombic indexable insert designed for medium to heavy steel turning with reliable chip control and secure clamping CVD-coated carbide grade T9225 ISO‑compatible rhombic 19 mm size 1.6 mm corner radius for stable cuts Cylindrical hole and single-sided chipbreaker Consistent cutting performance under variable conditions The CNMM190616 insert combines a CVD‑coated carbide substrate with the T9225 universal grade to balance wear resistance and toughness. This composition is engineered for steel turning where cutting conditions can fluctuate or where light interruptions occur. The result is predictable tool life and fewer unplanned tool changes, supporting higher uptime and a more economical process per component produced. Easy integration into ISO tool systems for reliable set-up Compatibility with the ISO turning system is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic outline and cylindrical hole ensure secure seating in compatible holders; installers should match holder geometry and clamping elements to the insert dimensions (19 × 6.35 mm) for correct positioning. For less experienced teams, matching these parameters reduces vibration and helps achieve repeatable results quickly. Improved chip control and surface quality with low setup effort The single‑sided chipbreaker and a corner radius of 1.6 mm support stable chip formation and contribute to a consistent surface finish in medium to heavy turning tasks. The insert’s 0° clearance specification and rhombic geometry allow flexible grade and chipbreaker choices depending on workpiece stability and feed rates. Selecting this configuration reduces rework, shortens cycle times and eases downstream operations. For an application review or to request availability of the Tungaloy CNMM190616 T9225 insert (ref. TUN6780693), contact Metav Werkzeuge for tailored advice and fast handling. Technical data Article number: 6780693 Manufacturer SKU: TUN6780693 SKU: 6780693-Tungaloy Model series: ISO‑Drehwendeschneidplatten WPL designation: CNMM190616 Manufacturer: Tungaloy Core specifications Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Materials & special features Material: carbide (Hartmetall) Coating: CVD‑coated Grade: T9225 (robust universal grade) Shape: rhombic insert Hole: with cylindrical hole Chipbreaker: single‑sided Application: turning (Drehen) ISO series: compatible with ISO turning holders Suitability: medium to heavy steel machining FAQ Which materials is this insert optimised for? The CNMM190616 T9225 insert is optimised for medium to heavy steel machining; the T9225 grade provides toughness where interrupted cuts or variable engagement occur. How does the chipbreaker affect machining results? The single‑sided chipbreaker on this insert improves chip control in turning operations, promoting safer chip evacuation and a more consistent surface finish with reduced risk of built‑up edge. Will this insert fit my existing ISO holder? Compatibility depends on holder form, clearance angle, tolerance and clamping method; the CNMM190616 designation identifies the geometry so matching the holder to those dimensions ensures correct fit. What cutting geometry helps reduce vibration? Using the 1.6 mm corner radius together with an appropriate feed and clamping setup increases edge support and reduces vibration during medium to heavy cuts. Is the insert supplied with a holder or screws? The CNMM190616 T9225 is supplied as an indexable insert; holders, clamping kits and spare screws are ordered separately to allow correct selection for the application. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225 for extended edge life, the 80° rhombic geometry for versatile turning, and the secure fixing provided by the cylindrical centre hole for stable production. Order genuine inserts directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CNMM 190616 T9225 — ISO rhombic turning insert, 80° by Tungaloy The CNMM190616 T9225 is an ISO-standard rhombic indexable insert engineered for external and internal turning in medium to heavy steel applications, offering enhanced toughness where interrupted cuts or variable engagement occur. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning 80° rhombic geometry, 1.6 mm corner radius Cylindrical hole and 6.35 mm thickness Enhanced tool life and process stability for demanding steel work The combination of CVD-coated carbide and the T9225 grade delivers a balance of wear resistance and toughness that is particularly effective in variable engagement and lightly interrupted cuts. This composition promotes stable chip formation, reduces flank wear under harsher conditions and therefore supports longer tool life. For production environments where consistent cycle times and predictable tool changes matter, this specification translates into measurable uptime improvements and reduced regrinding intervals, helping to maintain a smooth machining flow. Secure seating and rigidity that improve surface finish and accuracy Designed as an ISO-standard insert with a cylindrical hole, the geometry ensures positive seating in appropriate holders, while the 80° rhombic outline provides versatile approach angles for both external and internal operations. The plate thickness of 6.35 mm increases resistance to bending under heavy cuts and vibration, and the corner radius 1.6 mm offers a robust cutting edge that balances strength with the ability to produce acceptable surface finishes on steel. Compatibility with clamping systems depends on matching form, clearance angle, tolerance and size; selecting a properly rated external holder or boring bar is essential for achieving repeatable accuracy. Practical selection guidance for efficient results on the shop floor Choose the single-sided chipbreaker and insert grade according to component material, machine stability and the intended feed range to exploit the full potential of the cutting geometry. For general-purpose turning and finishing passes in steel, the robust grade and chip control features reduce the need for frequent insert changes and help maintain process reliability. In combination with a suitably rigid toolholder and correct cutting data, the insert supports higher metal removal rates and predictable tool life. For tailored advice on holder compatibility, cutting parameters or multi-edge strategies, Metav Werkzeuge provides competent consultation and rapid supply of genuine Tungaloy inserts and accessories. Contact Metav Werkzeuge for application-specific guidance and to secure genuine Tungaloy CNMM190616 T9225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and availability. Technical data Article number: 6780772 Manufacturer SKU: TUN6780772 SKU: 6780772-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Included angle: 80° Thickness: 6.35 mm Plate size: 19 mm Relief angle: 0° Special features Material: carbide Coating: CVD Shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: single-sided ISO designation: CNMM190616 Application: turning FAQ What materials is this insert suited for? The CNMM190616 T9225 insert is specified for medium to heavy steel machining; the T9225 grade was developed for robust performance and stable chip formation in such steel applications. Which holder features must match the insert for correct fitting? Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; ensure the chosen holder matches these parameters for secure mounting of the CNMM190616. Does the cylindrical hole improve clamping stability? Yes, the cylindrical hole provides a central locating feature that supports secure clamping and repeatable seating in compatible holders, which helps maintain cutting accuracy under heavier cuts. What advantages does the 1.6 mm corner radius offer? A corner radius of 1.6 mm increases edge robustness and contributes to a more consistent surface finish under moderate to heavy feeds, reducing the likelihood of edge chipping during interrupted cuts. Are there recommendations for choosing the chipbreaker? Select the chipbreaker based on workpiece material and machining stability; the single-sided chipbreaker on this insert is intended to offer reliable chip control in typical turning operations while preserving edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated cemented carbide and an 80° rhombic geometry to maintain process stability and consistent component quality in turning operations; the tough T9235 grade extends life in interrupted or unstable cuts. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMM 190616 T9235 CNMM turning insert, CVD‑coated carbide (Tungaloy) A CNMM 190616 T9235 insert for ISO‑standard turning, engineered for external and internal turning with a single‑sided chipbreaker and a cylindrical hole for secure clamping CVD-coated carbide, grade T9235 Suitable for interrupted cuts and unstable conditions 80° rhombic form with 1.6 mm nose radius Single-sided chipbreaker, cylindrical hole Stable turning under variable conditions The ISO‑compliant rhombic insert is built to deliver stable cutting when workpiece support or machine rigidity is limited. The combination of the rhombic geometry and the 80° included angle provides a robust cutting edge that resists deflection, while the cylindrical hole ensures reliable clamping in standard holders. This results in fewer interruptions caused by insert movement and helps maintain dimensional consistency across batches. Reliable grade for steel and interrupted cuts The T9235 CVD‑coated grade is formulated as a tough grade for steels at lower cutting speeds and in less stable conditions. The CVD coating creates a hard, wear‑resistant surface while the substrate retains toughness to absorb shock during interrupted cuts. For everyday workshop applications, this means longer tool life and reduced frequency of insert changes, translating into improved productivity and predictable operating costs. Geometry and dimensions that support secure clamping With a 1.6 mm nose radius, 6.35 mm thickness and a 19 mm size, the insert balances edge strength and surface finish. The rhombic CNMM form with 80° included angle suits external and internal turning where a stable seat and clear orientation are required. The single‑sided chipbreaker improves chip control for many steel turning tasks, reducing the risk of built‑up edge and helping to maintain a consistent surface quality. Practical guidance for selection and use Select the chipbreaker and grade according to workpiece material, process stability and cutting conditions: the CVD‑coated T9235 grade performs best in steel when cutting speeds are moderate and interruptions occur. Match the insert to a compatible holder by checking form, clearance angle, tolerance class, clamping method, size and thickness. Proper pairing reduces setup time, improves reproducibility and supports a more economical production flow. For reliable turning performance with Tungaloy quality, request CNMM 190616 T9235 inserts from Metav Werkzeuge or contact our technical team at Metav Werkzeuge for tailored recommendations: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6785874 Manufacturer SKU: TUN6785874 Model series: ISO turning inserts Facts Size: 19 mm Thickness: 6.35 mm Nose radius: 1.6 mm Clearance angle: 0° Included angle: 80° Special features Shape: rhombic (CNMM) Coating/grade: T9235 (CVD‑coated) Chipbreaker: single‑sided Hole: cylindrical hole Material: cemented carbide Application: turning; external and internal turning FAQ What materials is this insert designed to cut? The CVD‑coated T9235 grade is optimised for steels; the CNMM 190616 insert performs well in cutting steels under intermittent or unstable conditions. How does the chipbreaker affect performance? The single‑sided chipbreaker improves chip control during turning, helping to prevent long, stringy chips and supporting consistent surface finish with the CNMM geometry. Which holders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; holders made for CNMM 190616‑type inserts will accept this item when dimensions match. What advantages does the CVD coating provide? CVD coating on the T9235 grade offers increased wear resistance and thermal stability while the carbide substrate supplies the toughness needed for interrupted cuts. Can this insert be used for finishing and roughing? With a 1.6 mm nose radius and robust geometry, the insert is suitable for medium finishing and roughing operations where stability is limited and interrupted cuts are likely. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190616 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide T9235 grade and a 1.6 mm corner radius for robust performance in interrupted and unstable turning; the rhombic ISO geometry with a 0° clearance angle and cylindrical hole ensures secure clamping and predictable chip control. Order directly via Metav Werkzeuge or contact our advisors for compatibility checks. CNMM190616 T9235 — ISO turning insert, CVD‑coated carbide, 1.6 mm corner radius (Tungaloy) The CNMM190616 T9235 is an ISO‑standard rhombic turning insert engineered for external and internal turning operations, offering a single‑sided chipbreaker and design suited to interrupted cuts and unstable setup conditions. ISO rhombic insert CNMM190616 CVD‑coated carbide grade T9235 1.6 mm corner radius for robust turning Cylindrical hole for secure clamping Stable cutting in interrupted and unstable conditions The combination of a CVD coating and a tough carbide substrate in this grade provides elevated resistance to micro‑chipping and flank wear, making the insert particularly suited to steel machining at lower cutting speeds and under interrupted cuts. The rhombic geometry and the single‑sided chipbreaker guide chips reliably, reducing rework and machine downtime. This configuration translates into more consistent cycle times and fewer insert changes in mixed production runs. Secure mount and predictable tool life Designed with a cylindrical hole and governed by ISO form, size and tolerance measures, the insert seats securely in standard clamping systems; the 0° clearance angle supports stable cutting in less rigid set‑ups. The 6.35 mm thickness and 19 mm size offer mechanical stability, while the 80° included angle contributes to elastic strength in radial loading. These attributes together reduce vibration sensitivity and improve the repeatability of finished diameters. Efficiency and process reliability with T9235 grade The T9235 grade is a tough, CVD‑coated option optimised for reliability rather than maximum cutting speed. In practice, this means fewer catastrophic failures during interrupted cutting and better tolerance for variable chip loads. The result is an improved throughput where tool changes and scrap are minimised, supporting leaner production and more predictable maintenance intervals. Practical application and selection advice The insert is intended for conventional turning tasks—both external and internal—where tool stability can vary and interruptions in the cut are likely. Selecting this grade and geometry supports a conservative, process‑safe approach: choose the 1.6 mm corner radius where robustness is required and combine with a suitable external holder, locators and replacement screws to complete the system. For uncertain fits, compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; a quick check prevents assembly issues. For applications requiring secure clamping and stable performance in interrupted turning, specify the Tungaloy T9235 grade and arrange supply or technical advice via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and stock availability. Technical Data Article number: 6785876 Manufacturer SKU: TUN6785876 Type designation: CNMM190616 Model series: ISO turning inserts Facts Corner radius: 1.6 mm Thickness: 6.35 mm Size: 19 mm Included angle: 80° Clearance angle: 0° Special features CVD‑coated carbide (T9235) Rhombic insert geometry Single‑sided chipbreaker Cylindrical hole for clamping Designed for external and internal turning Suited to steel at lower cutting speeds and interrupted cuts FAQ Is this insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the CNMM190616 T9235 conforms to ISO geometry and fits holders designed for CNMM190616‑type inserts. Which materials is the grade best suited for? The T9235 grade is a tough, CVD‑coated carbide optimised for machining steel at lower cutting speeds and for situations with interrupted or unstable cutting conditions. What is the corner radius and when should it be used? The insert has a 1.6 mm corner radius, providing increased edge strength for heavier cuts and reducing the risk of edge chipping during interrupted turning. Does the insert provide chip control for interrupted cuts? Yes, the single‑sided chipbreaker and the T9235 grade together promote controlled chip formation and evacuation in interrupted and variable cutting scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190616 T9235 Wendeplatten - Tungaloy
Benefit from a tough CVD-coated cemented carbide T9235 grade together with an 80° rhombic geometry and a 1.6 mm corner radius for secure performance in interrupted and unstable turning operations. Order the CNMM190616 T9235 indexable insert via Metav Werkzeuge or consult our specialists for selection advice. CNMM 190616 T9235 Tungaloy indexable insert — Turning, rhombic 80° The CNMM190616 T9235 indexable insert is an ISO-standard rhombic turning insert developed for external and internal turning, especially where interrupted cuts or unstable conditions demand a tough cutting grade. CVD-coated carbide grade T9235 for steel 80° rhombic geometry for stable turning 1.6 mm corner radius for robust edge strength Single-sided chipbreaker for interrupted cuts Stable cutting under interrupted and unstable conditions The combination of a CVD-coated cemented carbide substrate and the T9235 tough grade delivers reliable wear resistance and improved edge security when machining steel at moderate speeds. The 80° rhombic geometry provides a sturdy cutting edge and better engagement for turning tasks that involve vibration or cut interruptions. For practical terms: the tougher grade helps prevent premature chipping and extends the interval between index changes, which supports consistent cycle times and fewer tool interventions. Simple mounting and machine compatibility for faster setup This insert follows the ISO-standard designation and fits into conventional holders when form, relief, tolerance class, clamping and thickness match. With a 6.35 mm thickness, a cylindrical hole for positive seating and a robust clamping interface, the insert is designed for secure fixation that reduces micro-movements during machining. The standardised format shortens setup time and eases stocking because compatible holders and clamping kits from the same system family are commonly available. Recommended use and machining guidance Select the single-sided chipbreaker option to handle interrupted cuts and variable chip formation typical when turning steel with irregular chip loads. The chipbreaker assists in controlled chip flow and reduces edge loading; in practice, this leads to more predictable surface quality and fewer online adjustments. For unstable or heavily interrupted operations, favour the tougher grade at somewhat reduced cutting speeds to maximise tool life and process stability. Proven brand performance and shop-floor benefits The insert is manufactured by Tungaloy and is intended for applications requiring dependable tool life and repeatable results in steel turning. The design focus is on robust edge behaviour and chip control rather than highest-speed finishing, so the component suits workshops aiming for reliable throughput rather than aggressive cutting windows. For specification clarifications or application matching, technical advice is available to ensure the insert meets the machining scenario. Contact Metav Werkzeuge for tailored machining recommendations on the Tungaloy CNMM190616 T9235 insert and receive expert guidance on holders, cutting parameters and stocking options. Technical data Article number: 6785875 Manufacturer SKU: TUN6785875 SKU: 6785875-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMM190616 Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 80° Special features CVD-coated cemented carbide grade T9235 Single-sided chipbreaker Cylindrical hole ISO-standard turning insert Rhombic plate Application: turning FAQ What materials is this insert suited for? The CNMM190616 T9235 insert is formulated for machining steel; the T9235 grade provides toughness for interrupted cuts and less stable conditions. How is the insert secured in the holder? The insert features a cylindrical hole and standard clamping geometry compatible with ISO-style holders; correct holder selection ensures proper seating and repeatable clamping. Which cutting conditions suit the T9235 grade best? T9235 is a tough, CVD-coated grade optimised for lower to moderate cutting speeds where chip interruptions or vibration occur; reducing speed slightly compared with finishing grades improves life. Can the insert be used for internal turning as well as external turning? Yes, the ISO rhombic format and the geometry of the CNMM190616 make it suitable for both external and internal turning when the holder provides appropriate access and support. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker promotes controlled chip formation in interrupted operations, reducing edge load and improving process stability for turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
CNMM 190624 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and proven ISO compatibility to maintain a productive turning process; order directly via Metav Werkzeuge or consult the technical team for material-specific recommendations. CNMM190624 T9215 – CVD-coated carbide turning insert, rhombic 80° (Tungaloy) The CNMM190624 T9215 is an ISO-standard rhombic turning insert engineered for external and internal turning in medium steel applications, offering a balance of durability and edge stability for continuous to slightly interrupted cuts. CVD-coated carbide for durable performance Rhombic 80° geometry for versatile turning 2.4 mm nose radius for robust profiles Single-sided chipbreaker, cylindrical hole mounting Improve cycle times with robust CVD-coated carbide geometry The CVD-coated carbide composition and the specified chip control make this insert a solid choice where consistent metal removal and predictable tool life are priorities. The combination of CVD-coated surface and a tough substrate increases abrasion resistance while preserving edge integrity, which translates into fewer tool changes and improved uptime. For production environments aiming for steady throughput, this geometry supports efficient machining of medium steel with continuous and slightly interrupted cuts, reducing process variance and helping to meet batch targets. Secure clamping and predictable results across holders The rhombic 80° form together with a cylindrical hole and standard thickness ensure wide compatibility with ISO seat holders; compatibility is defined by form, clearance angle, tolerance class, fastening and plate size. The 6.35 mm thickness and 2.4 mm nose radius provide mechanical stability during heavier passes and profiling work, while the 0° rake angle promotes a controlled cutting action in typical turning setups. Choosing the correct holder and clamping hardware will preserve the insert’s cutting edge and maintain dimensional accuracy through longer production runs. Grade T9215: balanced wear resistance and breakage safety The T9215 grade is tailored as a first choice for medium steel machining, combining high wear resistance with fracture toughness for dependable performance under varying cutting conditions. The single-sided chipbreaker is optimised for consistent chip formation when paired with suitable feeds and speeds, helping to prevent chip-related interruptions. Backed by Tungaloy’s metallurgy, this grade supports high productivity with reliable surface quality and repeatable results, making it suitable for shop floors where tool life confidence and process stability are key decision factors. Contact Metav Werkzeuge for application-specific advice and fast supply of Tungaloy CNMM190624 T9215 inserts; technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6772210 Manufacturer SKU: TUN6772210 SKU: 6772210-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Shape: Rhombic Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Cutting angle: 80° Rake angle: 0° Special features Material: Carbide Coating / grade: T9215 (CVD-coated) Chipbreaker: single-sided Mounting hole: cylindrical hole Typical application: external and internal turning (medium steel) FAQ What applications suit this insert best? The CNMM190624 T9215 insert is intended for external and internal turning of medium steel, performing well in continuous to slightly interrupted cuts where wear resistance and edge security are required. Which holders are compatible with the insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 80° shape and cylindrical hole are compatible with standard ISO clamping systems designed for this plate type. How does the T9215 grade affect machining performance? T9215 provides a balanced combination of abrasion resistance and toughness, enabling productive metal removal with reduced risk of chipping, particularly suitable for medium steel applications. Can this insert handle interrupted cuts? Yes, the grade and geometry are suitable for continuous and slightly interrupted cutting conditions; for heavy interruptions, select appropriate feeds, speeds and robust clamping to maximise tool life. What are the key dimensional specifications to check before ordering? Verify the plate size (19 mm), thickness (6.35 mm), corner radius (2.4 mm) and the 80° rhombic form to ensure correct fit in the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance and an ISO rhombic CNMM190624 geometry for straightforward tool matching; this results in stable, productive turning and predictable component quality. Order directly via Metav Werkzeuge or consult our experts for application-specific setup. CNMM190624 T9215 ISO rhombic indexable insert for turning by Tungaloy, CVD-coated carbide The CNMM190624 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and fracture toughness for medium steel machining. ISO rhombic insert, 80° geometry Designed for medium steel machining Single-sided chipbreaker, with hole 6.35 mm thickness for secure clamping Consistent productivity through CVD-coated carbide performance The CVD-coated carbide grade T9215 delivers a reliable mix of wear resistance and fracture toughness, making it a suitable choice for continuous to slightly interrupted cuts. This combination reduces unexpected tool failure and supports longer runtimes, which in turn improves machine utilisation and lowers process interruptions. Explaining briefly, the CVD coating forms a hard surface layer that slows abrasive wear while the substrate carbide maintains edge integrity; the practical result is a predictable tool life for many medium steel turning tasks. Reduced setup risk with ISO compatibility and robust geometry The insert’s ISO-standard designation and rhombic form simplify selection and replacement across compatible holders. With an 80° geometry, 6.35 mm thickness and a cylindrical hole for screw clamping, the component offers secure fixation and consistent cutting angles. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness — following these criteria reduces set-up errors and contributes to repeatable part quality, particularly in batch production or mixed-series turning operations. A system-oriented approach for practical workshop use This insert is conceived as part of a complete turning system: indexable insert, matching external holder or boring bar, underlay/clamping set and spare screws. The one-sided chipbreaker and the recommended grade make the insert particularly effective for turning in medium steel applications, where stable chip control and surface finish matter. Specifying the correct chipbreaker and grade for the workpiece geometry and machine rigidity yields measurable gains in throughput while safeguarding component tolerances. For tailored advice on integrating Tungaloy’s T9215 inserts into existing tool setups or to arrange procurement through Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6773917 SKU: 6773917-Tungaloy Manufacturer SKU: TUN6773917 Model series: ISO indexable turning inserts Facts Corner radius: 2.4 mm Geometry angle: 80° Clearance angle: 0° Thickness: 6.35 mm Size: 19 mm Special features ISO designation: CNMM190624 Grade/coating: T9215 (CVD-coated carbide) Shape: rhombic Chipbreaker: single-sided Hole: with cylindrical hole Typical application: external and internal turning Suitable material: medium steel machining System components: compatible holder or boring bar, underlay/clamping set, spare screws FAQ Is this insert suitable for interrupted cuts? The T9215 grade provides a good balance of wear resistance and fracture toughness; it is suitable for continuous to slightly interrupted cuts when used as the CNMM190624 indexable insert. Which holders are compatible with CNMM190624 inserts? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for ISO rhombic CNMM190624 geometry are appropriate. What advantage does the CVD coating offer? A CVD-coated carbide like T9215 slows abrasive wear while maintaining a tough substrate, resulting in longer, more predictable tool life during medium steel machining. Can this insert be used for internal turning as well as external turning? Yes; the ISO rhombic form and standardised dimensions make the insert suitable for both external and internal turning when paired with the correct boring bar or holder. How should the chipbreaker and grade be selected? Select the chipbreaker and grade according to the workpiece material, cutting mode and machine stability; for medium steel, the single-sided chipbreaker with T9215 is a common productive choice. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, an 80° rhombic geometry and a 2.4 mm corner radius for dependable productivity and consistent surface finish; order directly via Metav Werkzeuge or consult the technical team for holder compatibility. CNMM190624 T9215 — Turning insert (ISO) by Tungaloy The CNMM190624 T9215 is an ISO rhombic turning insert engineered for medium steel machining, offering a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. ISO rhombic insert CNMM190624 T9215 CVD-coated carbide for medium steel 80° geometry with cylindrical hole 2.4 mm corner radius for stable cuts Reliable productivity for medium steel turning The grade T9215 is a CVD-coated carbide formulated as a first choice for medium steel machining, combining high wear resistance with fracture toughness to support extended tool life. As a result, users benefit from high productivity in continuous to slightly interrupted cutting conditions; the coating reduces flank wear while the substrate provides toughness against chipping. This balance translates into fewer insert changes and more consistent cycle times, which supports efficient production planning and lower process variability. Geometry and clamping that stabilise cuts and surface quality The ISO rhombic outline with 80° geometry reduces radial engagement and helps maintain a steady cut when machining shafts and profiles, improving dimensional control. The 2.4 mm corner radius promotes a robust cutting edge for improved surface finish and edge stability on interrupted sections, while the cylindrical hole ensures secure clamping in compatible holders. A 0° rake angle gives a neutral cutting action, making the insert versatile across feed ranges and reducing the risk of unexpected edge failure during typical turning operations. System compatibility and workshop advantages Being ISO‑standardised, the insert fits established holders when form, clearance, tolerance class, fastening and thickness align, enabling quick integration into existing tool setups. The single-sided chipbreaker aids stable chip formation, improving evacuation and reducing rework caused by poor chip control. In practice, the modular system — insert, external holder or boring bar, shim and screws — simplifies inventory management and speeds changeovers, contributing to reduced downtime on the shop floor. If additional technical specifications or holder recommendations are required, the technical team is available by email or phone for clarity and application advice: info@metav-werkzeuge.com, +49 2822 7131930. For tailored advice on Tungaloy CNMM190624 inserts, holder compatibility and application optimisation, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6773847-Tungaloy Manufacturer article number: 6773847 Manufacturer SKU: TUN6773847 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Cutting angle: 80° Rake angle: 0° Plating/grade: T9215 Design & features Rhombic plate form Cylindrical mounting hole CVD-coated carbide Single-sided chipbreaker ISO-compatible turning insert Suitable for turning (Drehen) System components: holder, shim, clamping set, replacement screws FAQ What materials is this insert best suited for? The T9215 grade on the CNMM190624 insert is optimised for medium steel and provides a balance of wear resistance and toughness for continuous to slightly interrupted cuts. How does the 80° geometry affect cutting? An 80° approach angle reduces radial cutting forces and improves dimensional control, which helps when machining shafts, shoulders and profiles with the ISO rhombic insert. Can this insert be used in interrupted cuts? Yes, the CVD-coated carbide and robust corner radius make the insert suitable for continuous to slightly interrupted cutting conditions while maintaining edge stability. What does the cylindrical hole provide? The cylindrical hole enables secure and repeatable clamping in compatible holders, improving positional stability and reducing the risk of insert movement during heavy engagement. Which chipbreaker is fitted and what is the benefit? The insert features a single-sided chipbreaker designed to promote stable chip formation and efficient evacuation, reducing the chance of chip-related surface defects. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a 2.4 mm corner radius and ISO compatibility for dependable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for holder matching and supply. CNMM 190624 T9225 CNMM190624 Turning insert by Tungaloy — CVD-coated carbide, 2.4 mm radius A CNMM190624 T9225 indexable turning insert designed for medium to heavy steel turning, with rhombic geometry and a cylindrical hole for secure clamping CVD-coated carbide for high wear resistance Robust T9225 grade for medium/heavy steel Rhombic 80° geometry for precision turning Cylindrical-hole for reliable clamping Durable cutting performance for demanding steel turning The CVD-coated carbide construction delivers consistent wear resistance and long tool life under variable cutting conditions. The Tungaloy grade T9225 combines toughness with cutting-edge coating technology, making it suitable where interrupted cuts or fluctuating engagement demand added resilience. As an ISO rhombic insert with a 2.4 mm corner radius and 6.35 mm thickness, this solution provides a balance of edge strength and accessibility for external and internal turning. The use of a universal, robust grade reduces tool changes and supports stable, repeatable production cycles. Secure clamping and straightforward holder compatibility Compatibility with the machineholder is defined by the insert form, relief angle, tolerance class, fastening and the insert’s size and thickness. The rhombic shape and cylindrical hole offer positive location and secure clamping in standard ISO holders and boring bars. The insert’s nominal size of 19 mm and 0° clearance (relief) angle are common in many turning systems, simplifying selection of the matching external holder, shim and clamping set. Choosing a correctly rated holder and torqueing the replacement screw to the manufacturer’s recommendation ensures process stability and repeatable clamping accuracy. Enhanced process stability through chip control and geometry The one-sided chipbreaker is matched to the T9225 grade to improve chip formation and evacuation when machining steel; correct pairing reduces vibration and enhances surface finish. For semi-roughing and finishing operations, the rhombic geometry with an 80° approach angle helps maintain axial stability and reduces radial load peaks. Where interrupted cuts or variable engagement occur, this combination of geometry and grade supports a dependable cutting edge, resulting in fewer unplanned stops and improved throughput. Practical selection and integration to boost productivity The insert is part of an ISO-indexable system comprising the insert, an appropriate external holder or boring bar, and a supporting shim/clamping set with replacement screws. For efficient procurement and minimal downtime, keep spare screws and shims on hand and select the chipbreaker and grade according to the workpiece material and machining strategy. The CNMM190624 T9225 insert simplifies inventory by offering a versatile option for a wide range of steel turning applications, helping to reduce setup complexity and increase overall shop productivity. For reliable medium-to-heavy steel turning with the Tungaloy T9225 grade, contact Metav Werkzeuge for tailored advice, holder matching and prompt supply: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6781305 Facts Manufacturer SKU: TUN6781305 Material: Carbide Model series: ISO-Drehwendeschneidplatten Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Lead/approach angle: 80° Special features CVD-coated carbide Grade: T9225 (robust universal grade for medium/heavy steel) One-sided chipbreaker Rhombic plate form With cylindrical hole for clamping ISO-indexed turning insert suitable for external and internal turning Recommended for interrupted cuts and variable engagement conditions FAQ What materials is this insert suitable for? The CNMM190624 T9225 insert by Tungaloy is optimised for medium-to-heavy steel machining and performs well under changing engagement and lightly interrupted cuts. Which holder features are required for correct compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert’s cylindrical hole and rhombic geometry facilitate secure clamping in standard ISO holders. What advantages does the T9225 grade provide? Tungaloy’s T9225 offers a balance of toughness and wear resistance; the CVD coating enhances edge life, particularly in operations where chip formation and variable engagement demand a robust grade. Is the insert suitable for internal as well as external turning? Yes, the ISO rhombic shape and 6.35 mm thickness make the insert suitable for both external and internal turning when paired with the correct holder or boring bar. How does the chipbreaker affect machining performance? The one-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and process stability, especially in steel turning with intermittent cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9225 Wendeplatten - Tungaloy
Benefit from the robust T9225 CVD‑coated carbide grade and ISO‑standard CNMM190624 geometry for consistent medium‑to‑heavy steel turning; the design combines reliable chip control with straightforward mounting. Order the CNMM190624 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMM 190624 T9225 — Tungaloy indexable turning insert, CVD‑coated carbide, 80° rhombic The CNMM 190624 T9225 is an ISO‑standard indexable insert engineered for external and internal turning, offering a robust universal grade for variable cutting conditions and interrupted cuts. CVD‑coated carbide grade T9225 Universal grade for medium–heavy steel ISO CNMM190624 rhombic 80° geometry Cylindrical hole, single‑sided chipbreaker Reliable performance for medium-to-heavy steel turning The rhombic 80° geometry and CVD‑coated carbide construction deliver stable cutting behaviour in varying engagement conditions. Designed as a universal grade, T9225 combines toughness with wear resistance so that machining of steels under slightly interrupted cuts achieves fewer insert changes and steadier process windows. This translates into improved machine uptime and a more favourable cost‑per‑part ratio, because the grade tolerates changes in cutting depth and feed without rapid edge failure. The single‑sided chipbreaker supports predictable chip formation, reducing the risk of entanglement and improving surface consistency. Compatibility and secure mounting for efficient changeovers Compatibility is determined by form, relief angle (0°), tolerance class, fastening method, size and thickness; correct holder selection is therefore essential for repeatable clamping and cutting. The rhombic CNMM form with a cylindrical hole enables positive seating in many standard external holders and boring bars designed for ISO inserts; the 6.35 mm thickness and 19 mm inscribed circle ensure mechanical stability under heavier radial loads. When matching a holder, assess seating face and screw/clamp arrangement to guarantee correct cutting angles and safe clamping — this reduces chatter and preserves tool life. Coating and grade advantages that extend tool life The CVD layer on this grade acts as a hard, thermally stable surface that defends the cutting edge against abrasive wear while retaining substrate toughness beneath. As a result, the CVD‑coated carbide exhibits consistent flank wear progression rather than sudden edge breakage, which benefits series production and mixed‑batch work. The corner radius 2.4 mm provides a balance between strength and finish: larger radii increase edge robustness for interrupted cuts and roughing, while still enabling acceptable surface quality in many finishing passes. Specify the chipbreaker and grade according to workpiece material, rigidity and desired surface finish to get the best compromise between productivity and cost. Practical selection advice for process optimisation For stable turning of alloyed or carbon steels, choose the T9225 grade combined with an appropriate insert geometry and holder rigidity; in lighter‑duty finishing choose smaller corner radii or softer chipbreakers, while for interrupted cuts or heavy roughing retain the 2.4 mm radius and robust clamping. The ISO format simplifies stock‑keeping and tool change routines across multiple machines. Where process security and repeatability matter, standardised ISO inserts and correctly specified holders reduce setup time and variation between operators, supporting consistent part quality and predictable tool consumption. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CNMM 190624 T9225 inserts and compatible holders — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability Technical data Article number: 6781330 Manufacturer SKU: TUN6781330 SKU: 6781330-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Facts Size (inscribed circle): 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Included angle: 80° Hole: with cylindrical hole Special features Grade: T9225, CVD‑coated carbide Geometry: rhombic, ISO CNMM190624 Chipbreaker: single‑sided Application: turning (external and internal) Mounting: cylindrical hole for standard ISO holders Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness FAQ What holder types are compatible with this rhombic CNMM insert? The CNMM190624 T9225 indexable insert fits holders and boring bars designed for ISO rhombic CNMM inserts with a cylindrical hole and 19 mm inscribed circle; correct seating and clamping according to the holder’s tolerance class ensure secure mounting. Which materials is the T9225 grade best suited for? The T9225 CVD‑coated carbide grade is formulated as a universal choice for steel machining, particularly medium‑to‑heavy turning where variable engagement or slight interruptions occur. How does the 2.4 mm corner radius affect machining? A 2.4 mm corner radius increases edge strength and is beneficial for roughing and interrupted cuts, improving stability and reducing the likelihood of edge chipping while maintaining acceptable surface finish for many applications. Can this insert be used for internal turning operations? Yes — the ISO CNMM190624 geometry and mounting features allow use in suitable internal holders and boring bars, provided the toolholder offers appropriate rigidity and clearance for the insert thickness and relief angle. How is chip control achieved with this insert? Chip control is managed by the single‑sided chipbreaker integrated into the insert geometry; combined with the CVD‑coated carbide grade, this supports predictable chip formation and helps maintain surface quality during medium‑to‑heavy steel turning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190624 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a generous 2.4 mm corner radius delivers robust performance for medium to heavy steel turning, while the ISO rhombic geometry ensures broad holder compatibility and stable chip control — order genuine inserts via Metav Werkzeuge or contact our consultants for application advice. CNMM 190624 T9225 turning insert — CNMM190624 by Tungaloy, CVD-coated carbide, 80° rhombic The CNMM190624 T9225 is an ISO rhombic turning insert designed for reliable external and internal turning in steel applications, offering a sturdy chip control solution for interrupted and variable cutting conditions. CVD-coated carbide for extended life 80° rhombic shape for versatile turning 2.4 mm corner radius for robust cutting Greater process reliability through material and coating The insert is manufactured from carbide and finished with a CVD-coated surface, a combination that provides elevated resistance to abrasion and thermal fatigue in demanding turning tasks. This composition reduces flank wear and helps maintain dimensional tolerance over longer tool life, which translates directly into fewer tool changes and higher machine uptime. The hard surface layer also supports consistent cutting-edge geometry when machining medium to heavy workpieces, enabling predictable performance under slightly interrupted cuts. Versatile geometry that simplifies workholding choices Featuring an 80° rhombic form with a 0° relief and a cylindrical hole for secure fastening, the insert is compatible with a wide range of ISO holders when form, relief angle, tolerance class, fastening method, size and thickness match. The standardised ISO sizing streamlines tool selection and inventory management for production environments. The rhombic profile offers a balance between strength and accessibility, making this insert suitable for both external profiles and certain internal turning tasks where the geometry permits effective cutter approach angles. Designed for productive steel machining The grade T9225 is tuned as a robust universal option for medium to heavy steel machining where variable engagement or light interruptions call for additional toughness. The 2.4 mm corner radius provides added edge strength, reducing risk of chipping during depth changes or unstable cut entry, while the one-sided chipbreaker promotes controlled swarf formation. Together, these features improve process stability and support consistent surface finish with fewer reworks. Practical benefits for workshop efficiency Using standard ISO indexing inserts like this one simplifies stockkeeping and reduces set-up time, as spare inserts can be fitted quickly to matching holders and clamping sets. The 6.35 mm thickness and 19 mm size present a robust platform for repeatable clamp seating and secure engagement, while the central hole and cylindrical seating ensure reliable fastening. These practical design choices contribute to reduced tooling downtime and predictable cycle times in small-batch to serial production. For tailored cutting data, holder compatibility checks or to secure original Tungaloy CNMM190624 T9225 inserts promptly, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and supply. Technical Data Article number: 6780694 Manufacturer item number: 6780694 SKU: 6780694-Tungaloy Model series: ISO turning inserts Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Geometry angle: 80° Relief angle: 0° Special features CVD-coated carbide grade T9225 Rhombic plate form Cylindrical hole for fastening One-sided chipbreaker Intended application: turning Suitable for medium to heavy steel machining Compatible with ISO holders depending on form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The CNMM190624 T9225 insert is formulated for medium to heavy steel machining; the T9225 CVD-coated carbide grade emphasises toughness for variable engagement and interrupted cuts. How does the 2.4 mm corner radius affect performance? A 2.4 mm corner radius increases edge strength and resilience, reducing the likelihood of chipping during depth changes and improving process stability in heavier turning operations. Is the insert compatible with all ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the rhombic 80° profile and 6.35 mm thickness are standard, but holder verification is recommended. What advantage does the CVD coating provide? The CVD-coated surface enhances abrasion resistance and thermal stability, extending tool life and supporting consistent surface finish when machining steel. Can this insert be used for interrupted cuts? Yes, the T9225 grade is designed for robustness and is suitable for light to moderate interrupted cuts typically encountered in medium to heavy steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9235 and a 2.4 mm corner radius for robust performance in interrupted and unstable turning operations; order via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. CNMM 190624 T9235 ISO turning insert — 80° rhombic, CVD-coated (Tungaloy) The CNMM 190624 T9235 is an ISO-indexed turning insert designed for external and internal turning of steel, offering a tough, CVD-coated carbide grade for lower cutting speeds and interrupted cuts. CVD-coated carbide grade T9235 Rhombic 80° geometry 2.4 mm corner radius Cylindrical hole for secure clamping Reliable performance where stability is limited The combination of a CVD-coated surface layer and a tough cemented carbide substrate makes this insert particularly suited to turning tasks with interrupted cuts or variable rigidity. The T9235 grade is engineered for lower cutting speeds, prioritising resistance to mechanical shock and flank wear rather than top-end speed. The single-sided chipbreaker geometry supports controlled chip formation when cutting steels with varying machinability, which reduces the risk of built-up edge and minimises downtime for rework. For engineers seeking predictable cycle times and longer edge life under unstable conditions, the insert’s balanced construction reduces the need for overly conservative feed rates while maintaining acceptable surface integrity. Secure clamping and straightforward tool compatibility Being ISO-indexed, the insert fits standard holders when form, clearance angle, tolerance class, fixing method, size and thickness are matched. The rhombic 80° geometry and cylindrical hole enable positive seating and repeatable clamping torque, while the 6.35 mm thickness and 19 mm inscribed size provide a stable platform for axial and radial loads. The 0° clearance specification is part of the insert geometry that affects approach angles and must be considered with the selected holder to achieve the intended cutting edge engagement. Clear identification of these parameters simplifies tool setup and reduces trial-and-error at the machine, enabling faster changeovers and consistent machining results across multiple tool assemblies. Grade selection and application guidance for steel turning When machining steel under interrupted cuts or in less rigid setups, the T9235 grade favours toughness over maximum wear resistance; it is therefore recommended for stepped shoulders, parting lines and applications with varying chip thickness. The 2.4 mm corner radius offers a compromise between strength and surface finish: it supports higher cutting forces than very small radii while still allowing satisfactory component tolerances. For finishing passes or where surface roughness is critical, select feeds that match the corner radius to avoid chatter or unsupported edges. If the process requires alternative chip control or higher cutting speeds, choose a different chipbreaker or a harder, more wear-resistant grade; our catalogue and consultants can advise on the optimal combination of chipbreaker and grade for the specific steel alloy and machining strategy. For robust steel turning applications, request the Tungaloy CNMM 190624 T9235 via Metav Werkzeuge — contact info@metav-werkzeuge.com or +49 2822 7131930 for precise grade and chipbreaker recommendations and stock availability Technical data Article number: 6785924 Manufacturer SKU: TUN6785924 SKU: 6785924-Tungaloy Brand: Tungaloy Model series: ISO-indexed turning inserts ISO designation: CNMM190624 Facts Corner radius: 2.4 mm Thickness: 6.35 mm Inscribed circle / size: 19 mm Geometry angle: 80° Clearance angle: 0° Special features Material: cemented carbide Coating: CVD Grade: T9235 Insert shape: rhombic Hole style: cylindrical hole (with hole) Chipbreaker: single-sided Recommended application: turning (external and internal) FAQ What materials is this insert designed for? The Tungaloy CNMM 190624 T9235 insert is formulated primarily for machining steels; the T9235 grade emphasises toughness for interrupted and unstable cutting conditions. How does the T9235 grade differ from other grades? T9235 is a tough, CVD-coated cemented carbide grade intended for lower cutting speeds and conditions with higher mechanical impact, trading some high-speed wear resistance for improved edge strength. Can the CNMM 190624 be used for internal turning? Yes, the ISO-indexed CNMM 190624 geometry and its secure clamping via the cylindrical hole make it suitable for both external and internal turning operations. Which chipbreaker should be selected for variable material conditions? The single-sided chipbreaker supplied with this insert is a general-purpose option; for specific steels or highly interrupted cuts, adjust the chipbreaker type to match material, feed and stability requirements. What dimensions are critical when choosing a compatible holder? Key dimensions include the insert thickness (6.35 mm), inscribed circle (19 mm), corner radius (2.4 mm) and the 80° rhombic geometry—match these to the holder’s seat, clearance and clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9235 Wendeplatten - Tungaloy
Optimise turning performance with the CVD-coated carbide T9235 and a 2.4 mm corner radius that handle interrupted cuts and unstable setups with confidence; ISO compatibility ensures easy integration into existing toolholders. Order the insert via Metav Werkzeuge or contact their consultants for tailored cutting data and availability. CNMM 190624 T9235 — Tungaloy turning insert, ISO rhombic form for steel machining A standard rhombic ISO turning insert, CNMM 190624 T9235, designed for external and internal turning of steel where interrupted cuts or reduced cutting speeds demand a tough, CVD-coated carbide solution. ISO rhombic insert, size 19 CVD-coated carbide grade T9235 Single-sided chipbreaker for turning 2.4 mm corner radius, 6.35 mm thickness Reliable cutting in unstable turning conditions The combination of CVD-coated cemented carbide and the T9235 grade provides a balance of toughness and wear resistance suited to steel at lower cutting speeds. The insert is designed for conditions where stability is limited or cuts are intermittently broken; the tougher substrate helps resist chipping when the tool meets varying engagement. Compatibility with ISO toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the insert integrates without redesign of tool assemblies. This results in fewer unplanned tool changes and a steadier production flow. Better chip control and consistent surface quality The rhombic geometry with an 80° included angle, single-sided chipbreaker and a cylindrical hole supports reliable clamping and repeatable chip formation during turning. A corner radius of 2.4 mm contributes to edge strength and improves surface finish by distributing cutting forces over a larger contact zone; the 6.35 mm plate thickness enhances stability in longer overhangs. The CVD coating reduces built-up edge and abrasion on the rake face, which helps maintain consistent part tolerances and reduces rework. Practical benefits for workshop productivity Selecting this insert simplifies inventory and process planning: the ISO designation standardises holder fitment and the grade selection (T9235) is tailored for tougher steel operations and interrupted cuts. Fewer insert failures under shock loading translate into predictable tool life and lower downtime. The insert’s characteristics support cost-effective machining through reduced scrap and less frequent changeovers, while retaining the option to choose alternative chipbreaker styles and grades for different materials or finishing requirements. Integration advice and application scope Intended for general turning, the insert is suitable for both external and internal operations when matched with an appropriate external holder or boring bar, plus the correct clamp set and screws. For best results, pair the insert with a holder that matches the rhombic form, 0° clearance angle and required tolerance class; choose the chipbreaker and grade according to the workpiece material and machining stability. For complex setups or borderline materials, consult cutting parameters based on the toolholder geometry to ensure optimum cutting conditions and tool life. For tailored cutting-data and fast availability of the Tungaloy CNMM 190624 T9235 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and application support Technical data Article number: 6786063 SKU: 6786063-Tungaloy Manufacturer SKU: TUN6786063 Model series: ISO turning inserts Data Size: 19 Thickness: 6.35 mm Corner radius: 2.4 mm Clearance angle: 0° Included angle: 80° Special features Material: carbide Coating: CVD Grade: T9235 Insert form: rhombic Hole: with cylindrical hole Chipbreaker: single-sided Application: turning FAQ What materials is this insert intended for? The Tungaloy CNMM 190624 T9235 insert is specified for machining steel and is particularly effective where tougher grades and interrupted cuts are encountered. How does the CVD coating help in turning operations? A CVD-coated carbide surface on the CNMM190624 improves abrasion resistance and reduces built-up edge, which supports consistent surface finish and longer tool life in steel turning. Which holders are compatible with this ISO insert? Compatibility is determined by the ISO form, clearance angle, tolerance class, fastening and the insert size and thickness; select an ISO-compatible external holder or boring bar that matches these parameters. Is the insert suitable for internal as well as external turning? Yes, the insert is designed for both external and internal turning when the chosen holder or boring bar provides correct support and rigidity. What advantage does the 2.4 mm corner radius provide? A 2.4 mm corner radius increases edge strength, improves surface finish and spreads cutting forces, which is useful in unstable setups and interrupted-cut applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190624 T9235 Wendeplatten - Tungaloy
Combining the toughness of the T9235 grade with ISO‑standard geometry ensures reliable performance in unstable turning and during interrupted cuts; effective chip control and long edge life reduce downtime. Order the CNMM190624 T9235 Tungaloy indexable insert via Metav Werkzeuge or consult our specialists for tailored application advice. CNMM 190624 T9235 — Indexable turning insert, rhombic 80° (2.4 mm) — Tungaloy The CNMM 190624 T9235 is an ISO rhombic indexable insert for external and internal turning, optimised for steel machining where toughness and resistance to interruption are required CVD-coated carbide T9235 grade Rhombic 80° geometry for versatile turning 2.4 mm corner radius for heavy engagement Cylindrical hole, single-sided chipbreaker Tough grade for unstable and interrupted turning The CVD-coated carbide T9235 delivers a balance of toughness and wear resistance that is particularly beneficial for machining steel at reduced cutting speeds and under unstable conditions. As a CVD-coated cemented carbide, this grade resists edge chipping while maintaining cutting performance, so the insert copes with sudden load changes and interrupted cuts without frequent indexing. The practical outcome is fewer tool changes and more predictable production cycles, contributing directly to cost-efficiency on the shop floor. Geometry that promotes predictable chip control and fit The rhombic 80° shape provides a versatile approach angle suitable for a wide range of turning operations, while the 2.4 mm corner radius offers increased strength for heavier engagements. The single-sided chipbreaker is configured to support controlled chip formation on typical steel alloys, improving surface finish and evacuation. With a relief 0° and a plate 6.35 mm thickness, the component offers stable seating in compatible holders; the cylindrical hole ensures secure locating and straightforward clamping, reducing set-up variability. Extended life and stable process behaviour Designed for robust everyday use, the combination of material and geometry enhances wear resistance and overall process stability, which directly extends tool life. Less frequent insert changes lower handling time and reduce the risk of assembly errors. In practical terms, the insert helps maintain consistent cycle times and surface quality, supporting lean production goals and improving throughput when machining demanding steel components. Easy integration into standard turning systems As an ISO‑standard plate, the insert simplifies inventory and replacement logistics: ISO conformity guarantees repeatable fits with standard toolholders. The design emphasises compatibility with rhombic holders and standard clamping systems, meaning the insert integrates smoothly into existing tool sets and set-ups. Selection of the correct chipbreaker and grade should follow the workpiece material and machine stability; our technical overview and system guidance help match insert, holder and clamping to the application for optimal results. For technical specification support and to secure supply of the Tungaloy T9235 CNMM 190624 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and ordering. Technical data Article number: 6786031 Manufacturer SKU: TUN6786031 SKU: 6786031-Tungaloy Name: CNMM190624 T9235 Tungaloy insert Model series: ISO turning indexable inserts Core dimensions Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Insert angle: 80° Hole style: cylindrical Materials & special features Material: carbide (CVD-coated) Grade: T9235 — tough grade for steel, suited to interrupted cuts Chipbreaker: single-sided Shape: rhombic Application: turning (external and internal) Compatibility: ISO holders; determined by form, tolerance class and clamping FAQ What materials is this insert best suited for? The CNMM 190624 T9235 insert from Tungaloy is formulated for machining steel; the T9235 grade is a tough CVD‑coated carbide designed to handle interrupted machining conditions. Can this insert be used for internal as well as external turning? Yes—its rhombic 80° geometry suits both external and internal turning operations when paired with an appropriate holder; the ISO form simplifies selection. How does the chipbreaker affect performance? The single-sided chipbreaker on this indexable insert supports controlled chip formation on steel, improving evacuation and surface finish while reducing the risk of built-up edge. What determines holder compatibility for this insert? Holder compatibility is governed by the insert form, relief angle, tolerance class, clamping arrangement and thickness; the CNMM 190624 matches ISO‑standard toolholders designed for rhombic plates. Is the insert supplied with screws or mounting hardware? The listing describes the indexable insert itself; mounting hardware and the matching holder are separate components and should be selected to suit the CNMM 190624 geometry and clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190632 T9215 TUS Wendeplatten - Tungaloy
Take advantage of a high‑performance, CVD‑coated carbide grade that balances wear resistance and fracture toughness for consistently productive turning of medium steels; order directly via Metav Werkzeuge or contact our consultants for selection assistance. CNMM 190632 T9215 Turning Insert (ISO, CVD‑coated, 3.2 mm corner radius) – Tungaloy CNMM190632‑TUS T9215 is an ISO‑standard indexable turning insert for medium‑steel machining designed to deliver reliable performance in continuous to lightly interrupted cuts. CVD‑coated carbide grade T9215 3.2 mm corner radius for robust cuts Rhombic ISO form with cylindrical hole Suited for medium steel and productive turning High productivity and longer cutting intervals The CNMM190632‑TUS T9215 insert is engineered to raise machining throughput by combining a T9215 grade core with a CVD‑coated surface on a tough carbide substrate. This pairing provides increased abrasion resistance while retaining the necessary fracture toughness for demanding operations, so machining cycles run longer between indexings and tool changes. The result is measurable improvement in process efficiency and reduced non‑productive time, especially when pursuing stable, high‑volume turning strategies that prioritise consistent cutting conditions and surface quality. Consistent geometry and secure mounting for dependable results Designed to ISO dimensions, the rhombic plate form with a cylindrical hole ensures a repeatable fit in compatible holders. Key geometric values — a nominal size of 19 mm, plate thickness of 6.35 mm and a 3.2 mm corner radius — maintain cutting stability and edge strength. The 0° clearance specification and an 80° lead angle support predictable contact conditions at the tool‑workpiece interface, while the central hole enables secure clamping, minimising micro‑movement that can degrade finish and life. These features reduce setup variability and help maintain tolerances across production batches. Coating and chip control tuned for turning steel The CVD layer on this grade enhances thermal and abrasive wear resistance without sacrificing toughness; the result is improved resistance to flank and crater wear during continuous operation. The TUS chipbreaker geometry promotes reliable chip control, helping to avoid tangled chips and reducing the need for manual intervention. For operators less familiar with coating technologies: CVD‑coated means a chemical vapour deposition process applies a hard, adherent layer that performs well under heat and abrasion — a tangible benefit in medium‑steel turning where temperature and abrasion are common wear drivers. Practical selection advice for system‑level performance For optimal results, integrate the insert into a complete ISO system: the insert, a matching external holder or boring bar, an underlay/clamp and the correct fastening screw. Select the TUS chipbreaker and T9215 grade when machining medium steels and when a mix of wear resistance and toughness is required; alternate chipbreaker styles may be preferred for different stability or material conditions. For assistance with holder compatibility, clamping torque or process parameters, Metav Werkzeuge offers application guidance to align cutting data, holder geometry and stability for consistent, productive results. For tailored advice or to arrange supply of Tungaloy CNMM190632‑TUS inserts, contact Metav Werkzeuge for expert guidance and fast delivery – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773848 Manufacturer SKU: TUN6773848 Our SKU: 6773848-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: CNMM190632-TUS Core data Size: 19 mm Thickness: 6.35 mm Corner radius: 3.2 mm Clearance angle: 0° Lead angle: 80° Hole style: cylindrical Features and material Material: carbide Grade: T9215 Coating: CVD-coated carbide Chipbreaker: TUS Shape: rhombic Application: turning; suited to medium steel System: ISO insert for compatible holders, underlay and screws FAQ What materials is this insert optimised for? The CNMM190632‑TUS T9215 insert is optimised for medium steel machining and combines wear resistance with toughness for productive turning. Which chipbreaker should be chosen for standard turning tasks? The TUS chipbreaker included with this insert supports reliable chip control in continuous and lightly interrupted turning with the T9215 grade. How does the CVD coating benefit machining performance? The CVD‑coated layer on the T9215 grade increases abrasion resistance and thermal endurance, extending edge life under common turning conditions. What holder characteristics are required for correct fitment? A holder matching ISO geometry for rhombic inserts with a cylindrical hole, correct tolerance class and appropriate clamping accessories ensures secure fitment and repeatable cutting performance. Can this insert be used for interrupted cuts? Yes, the combination of carbide core and T9215 grade offers sufficient fracture toughness for continuous and light interrupted cuts, while very heavy interruptions may require a different geometry or grade. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190632 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, the T9225 universal grade for medium to heavy steel, and ISO compatibility for predictable tool changes — all designed to keep turning processes stable and productive; order directly via Metav Werkzeuge or consult their technical team for fitment advice. CNMM 190632 T9225 indexable insert for Turning — Tungaloy CVD-coated universal grade The CNMM190632-TUS T9225 Tungaloy insert is an ISO-standard rhombic turning insert engineered for medium to heavy steel machining, offering robustness for slightly interrupted cuts and high process stability. CVD-coated carbide grade T9225 Robust for medium to heavy steel ISO rhombic format with 80° angle 3.2 mm corner radius for strength Cylindrical hole, compatible with holders Optimised toughness and life for heavy-duty turning The insert is produced from carbide with a CVD coating, specified as grade T9225, which provides a balance of toughness and wear resistance suited for medium to heavy steel turning. This combination reduces the risk of chipping during interrupted cuts, ensuring a more consistent tool life and fewer unplanned indexings. The robust grade is designed to cope with varying engagement conditions, so the insert maintains cutting performance where stability and repeatability are priorities; this translates into lower downtime and improved productivity in serial machining. ISO conformity and geometry that simplifies set-up Compliance with ISO dimensions means the plate fits standard holders when form, relief angle, tolerance class, fastening and thickness match the toolholder specifications. The rhombic shape with an included 80° angle and a 0° relief angle provides a predictable clearance and cutting geometry, which simplifies fixture selection and shortens set-up time. Because the insert conforms to established ISO norms, spare management becomes easier and tool changes more reliable — an advantage for tightly scheduled production runs where interchangeability and quick swaps cut process overhead. Secure clamping and application-focused features for consistent results Mechanical details such as the cylindrical hole, 6.35 mm plate thickness and a 3.2 mm corner radius contribute to a secure clamp and enhanced edge strength. The integrated TUS chipbreaker promotes stable chip formation across a broad range of feed rates, improving surface finish and evacuation in both external and internal turning. Selecting the CNMM190632-TUS for operations with occasional interruptions or fluctuating engagement angles reduces the risk of premature edge failure and supports longer, trouble-free cutting cycles — a clear efficiency gain for production and maintenance planning. Contact Metav Werkzeuge to confirm compatibility with existing holders and to receive a tailored recommendation for the Tungaloy CNMM190632-TUS insert based on specific turning parameters Technical data Article number: 6781284 SKU: 6781284-Tungaloy Manufacturer SKU: TUN6781284 Model series: ISO turning inserts Brand: Tungaloy Key measurements Corner radius: 3.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Included angle: 80° Relief angle: 0° Special features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: TUS Shape: rhombic Hole style: cylindrical hole Typical application: external and internal turning Compatibility: ISO-standard holders FAQ What steels can this insert machine effectively? The CNMM190632-TUS Tungaloy insert (SKU 6781284-Tungaloy) is formulated as a robust universal grade T9225 for medium to heavy steel machining, offering reliable performance across a wide range of common steels. Is the insert suitable for interrupted cuts or unstable engagement? Yes. The T9225 grade and the insert geometry with a 3.2 mm corner radius are chosen to provide greater edge toughness, making this solution appropriate for slightly interrupted cuts and varying engagement conditions. Which holders are compatible with this plate? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the ISO designation and cylindrical hole of this rhombic insert permit use with standard ISO-compatible external and internal turning holders when the holder matches the plate geometry. How does the TUS chipbreaker affect surface finish and chip control? The TUS chipbreaker is optimised to produce stable chip formation under typical turning feeds, which helps maintain a consistent surface finish and reliable chip evacuation during medium to heavy machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 250916 T9215 TUS Wendeplatten - Tungaloy
Benefit from a blend of high wear resistance and fracture toughness in an ISO‑compliant indexable insert that supports productive turning operations on medium steels; the CVD‑coated cemented carbide grade T9215 is engineered for high throughput in continuous to lightly interrupted cuts. Order this insert directly via Metav Werkzeuge or consult the technical advisers for application guidance and holder compatibility. CNMM 250916 T9215 — ISO indexable turning insert for turning by Tungaloy (CNMM250916-TUS) A CNMM250916-TUS T9215 ISO indexable turning insert designed for efficient external and internal turning of medium‑grade steels, combining CVD coating and robust geometry for consistent productivity. CVD-coated cemented carbide grade T9215 Rhombic 80° geometry with 1.6 mm corner radius ISO compatible for standard holder systems Designed for continuous and light interrupted cuts Maximise material removal with consistent tool life The CVD-coated cemented carbide grade T9215 delivers a reliable balance of wear resistance and fracture toughness, which translates into extended tool life and steady performance during longer production runs. Thanks to the engineered coating and substrate, the cutting edge sustains elevated cutting speeds and maintains dimensional stability; this supports higher daily output and reduces the frequency of index changes. The insert’s TUS chipbreaker enables predictable chip control when machining medium steel, so process parameters can be standardised across batches for reproducible results. Geometry and dimensions engineered for process reliability With an 80° rhombic geometry and a 1.6 mm corner radius, the insert offers versatility between finishing and semi‑roughing operations while retaining edge strength for moderate interruptions. The 0° relief and 9.52 mm thickness contribute to robust seating in the holder, lowering vibration risk and improving surface finish. The part’s inscribed circle of 25 mm and the cylindrical hole ensure positive clamping in ISO holders—compatibility determined by form, relief, tolerance class, attachment and size—so retrofitting into established toolsets is straightforward. Practical advantages for workshop workflows Selecting this indexable plate simplifies inventory and machining planning: the ISO standardisation permits interchangeability across a wide range of clamping systems, while the T9215 grade’s combination of abrasion resistance and toughness reduces scrap and unplanned downtime. For shops processing batches of medium steel components, the result is a measurable improvement in throughput and predictable insert change intervals. The insert is suited to both external and internal turning tasks and pairs well with stable tooling assemblies and correctly matched carbide grades for the workpiece. Guidance on application and selection For best results, match the TUS chipbreaker and the T9215 grade to material condition and cutting stability: use the grade for continuous to slightly interrupted cuts on medium steel and select a more robust setup when heavier interruptions are expected. If surface finish and dimensional tolerance are priorities, the rhombic geometry with a modest corner radius offers a compromise between edge strength and fine finishing capability. Where uncertainty over holder compatibility exists, verify holder form and clamp details against the ISO designation before mounting to ensure stable engagement and repeatability. For application advice or to place an order for the CNMM250916-TUS T9215 insert from Metav Werkzeuge, contact the Metav technical advisers by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm holder compatibility and delivery options Technical data Article number: 6773849 Manufacturer SKU: TUN6773849 Metav SKU: 6773849-Tungaloy Name: CNMM250916-TUS T9215 Tungaloy insert Series: ISO indexable turning inserts Numbers / Core technical data Angle: 80° Inscribed circle: 25 Thickness: 9.52 mm Corner radius: 1.6 mm Relief angle: 0° Hole: with cylindrical hole Designs / Special features Grade/coating: T9215 (CVD-coated cemented carbide) Chipbreaker: TUS Geometry: rhombic, 80° Application: turning; external and internal turning Compatibility: ISO holders (form, relief, tolerance class, attachment, size, thickness) FAQ What materials is this insert best suited for? The CNMM250916‑TUS T9215 insert is optimised for medium‑grade steel, offering a mix of wear resistance and toughness suitable for continuous to lightly interrupted cuts. Is the insert compatible with standard ISO turning holders? Yes—the indexable plate adheres to ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, attachment type, size and thickness. What advantages does the T9215 grade offer compared with general grades? The T9215 CVD‑coated cemented carbide combines higher wear resistance with enhanced fracture toughness, supporting productive turning with fewer edge failures in medium‑steel applications. Can the insert be used for internal turning as well as external? The rhombic 80° geometry and cylindrical hole enable both external and internal turning when used with suitable holders and stable tool posts. What chip control can be expected with this chipbreaker? The TUS chipbreaker is designed for predictable chip formation when machining medium steel, aiding efficient evacuation and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 250916 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with the ISO rhombic geometry yields reliable performance in medium-to-heavy steel turning; benefit from stable chip control and robust edge strength. Order the CNMM 250916 T9225 directly via Metav Werkzeuge or ask our consultants if needed. CNMM 250916 T9225 — ISO turning indexable insert for turning by Tungaloy, CVD-coated carbide, 80° A CNMM 250916 T9225 indexable insert engineered for external and internal turning in medium-to-heavy steel applications, offering a balanced mix of toughness and wear resistance ISO-compatible rhombic insert, 80° approach CVD-coated carbide grade T9225 for durability 1.6 mm nose radius for robust edge strength Cylindrical hole for secure clamping High-performance grade for variable and interrupted cutting The T9225 grade is a CVD-coated cemented carbide developed as a robust universal solution for medium-to-heavy steel machining. Its composition prioritises toughness without sacrificing wear resistance, which makes it particularly suitable when cutting conditions vary or when slightly interrupted cuts occur. The coating increases surface hardness and thermal stability, while the carbide substrate maintains edge reliability; this combination reduces flank wear and contributes to predictable tool life in serial production. Geometry and ISO compatibility simplify toolholder selection The rhombic ISO geometry with an 80° approach angle and a 1.6 mm nose radius delivers a balance between strength and versatility. The insert’s 0° relief and standard 25 mm size mean compatibility is determined by form, relief angle, tolerance class, mounting method, size and thickness; these factors define whether the insert will seat correctly in a given external holder or boring bar. The presence of a cylindrical hole supports secure clamping in indexed systems and facilitates repeatable positioning during tool changes. Stable chip control and efficient production flow Equipped with the TUS chipbreaker, the insert promotes stable chip formation, which reduces the risk of tangling and shortens cycle times through consistent evacuation. That stability improves surface finish and lowers the frequency of unplanned stops for cleaning or chip management. For workshops aiming at predictable throughput and lower tool-change frequency, the combination of geometry and grade offers measurable productivity advantages while keeping handling straightforward during insert replacement. Contact Metav Werkzeuge for a personalised compatibility check and to secure genuine Tungaloy CNMM 250916 T9225 inserts tailored to the turning application Technical data Article number: 6781285 SKU: 6781285-Tungaloy Manufacturer SKU: TUN6781285 Model series: ISO turning indexable inserts Designation: CNMM250916-TUS Brand: Tungaloy Facts Size: 25 mm Thickness: 9.52 mm Nose radius: 1.6 mm Approach angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Grade T9225 — robust universal for medium–heavy steel CVD-coated cemented carbide Chipbreaker TUS for stable chip control Rhombic plate form Application: external and internal turning Compatibility by form, relief angle, tolerance class, mounting, size and thickness System components: matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert best suited for? The CNMM 250916 T9225 insert is designed primarily for medium-to-heavy steel machining; the T9225 grade and its CVD-coated carbide substrate provide toughness and wear resistance suitable for varying engagement conditions. How does the chipbreaker influence machining? The TUS chipbreaker on the CNMM 250916-TUS promotes stable chip formation and easier evacuation, improving surface finish and reducing interruption times during turning operations. Which holder features are required for proper seating? Proper seating requires a holder or boring bar matching the insert form, relief angle, tolerance class, mounting method, size and thickness—factors that determine ISO compatibility for the CNMM 250916 T9225. Can this insert handle interrupted cuts? Yes, the robust grade and carbide substrate of the CNMM 250916 T9225 are intended to tolerate slight interruptions in the cut while maintaining edge integrity. Is the insert indexed and easy to replace during production? The rhombic ISO design with a cylindrical hole enables secure clamping and repeatable indexing; replacement follows standard procedures for ISO turning indexable inserts such as the CNMM 250916 T9225 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 250916 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a tough CVD‑coated carbide grade and ISO‑standard geometry for consistent turning under unstable or interrupted conditions; the 1.6 mm corner radius and 80° rhombic form support robust edge strength and predictable chip control. Order original inserts directly via Metav Werkzeuge or consult our machining advisers if application details need clarifying. CNMM250916-TUS T9235 indexable turning insert — ISO CNMM 250916, 80° rhombic, Tungaloy A CNMM250916-TUS T9235 indexable insert for ISO‑standard turning, optimised for steel work under interrupted or unstable cutting conditions CVD-coated carbide grade T9235 ISO CNMM 250916 geometry, 80° rhombic 1.6 mm corner radius for robust profiles Cylindrical hole for secure clamping Consistent performance where stability is limited The insert combines a CVD‑coated surface treatment with a tough carbide substrate, delivering wear resistance while preserving edge integrity in demanding turning operations. The ISO CNMM 250916 geometry with an 80° included angle spreads cutting forces and reduces the risk of catastrophic edge failure, which is especially valuable when machining billets with vibration or interrupted cuts. The T9235 grade is formulated for steel at lower cutting speeds and provides reliable performance where chip formation and edge retention are critical. This technical pairing supports predictable tool life and reduces workpiece rework, improving overall process efficiency. Practical compatibility and mounting guidance for reliable clamping Compatibility with toolholders is determined by the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness; the rhombic plate and cylindrical hole require a matching ISO CNMM clamp and screw assembly. The 0° clearance angle and plate thickness of 9.52 mm give a stable seat in many external and internal turning holders, while the 1.6 mm corner radius balances strength and profile fidelity for external profiles and semi‑roughing passes. Selecting the correct chipbreaker (TUS) and matching feed/speed to the grade ensures consistent chip control and extends the effective life of the cutting edge. Why this insert benefits production planning and process reliability Using a standardised ISO insert such as this reduces inventory complexity and simplifies tool changeovers across multiple lathes. The CVD coating improves resistance to abrasion and built‑up edge, contributing to repeatable surface finish quality even under intermittent cutting. For engineering teams, the measurable features — size, radius, thickness, and included angle — mean predictable set‑ups and easier documentation of machining parameters. The result is improved machine uptime and a lower risk of scrap when facing unstable clamping or variable part geometry. For tailored recommendations on applications or to obtain original Tungaloy CNMM250916-TUS inserts (SKU TUN6786056), contact Metav Werkzeuge for expert advice and fast supply. Technical data Article number: 6786056 SKU: 6786056-Tungaloy Manufacturer SKU: TUN6786056 Designation: CNMM250916-TUS Brand: Tungaloy Facts Size: 25 mm Plate thickness: 9.52 mm Included angle: 80° Corner radius: 1.6 mm Clearance angle: 0° Hole style: cylindrical Special features Material: carbide Coating/grade: CVD‑coated, T9235 Plate form: rhombic Chipbreaker: TUS Application: turning ISO series: ISO‑standard indexable turning inserts FAQ What workpiece materials are suitable for this insert? The grade T9235 and CVD‑coated carbide construction are intended primarily for machining steel; the insert performs well at lower cutting speeds and in interrupted or unstable cutting conditions. How is holder compatibility determined for the CNMM250916-TUS? Compatibility depends on the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness; the rhombic form and cylindrical hole require a matching ISO CNMM indexable holder and clamp arrangement. Can this insert be used for internal turning as well as external turning? Yes, ISO‑standard indexable plates from this series are suitable for both external and internal turning operations when installed in the correct holder geometry and with appropriate cutting parameters. What advantage does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength and reduces chipping risk during interrupted cuts, while still allowing acceptable profile definition for semi‑roughing and finishing passes. How does the TUS chipbreaker influence machining? The TUS chipbreaker is designed to support controlled chip formation with the T9235 grade, enhancing evacuation and reducing the likelihood of long, entangling chips during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com